View allAll Photos Tagged Concept
Electric Drive
1.224 hp
1.600 Nm @ 0 - 6.500 rpm
Vmax : 355 km/h
0-100 km/h : 2,5 sec
Battery Capacity : 90 kWh
87th Geneva International Motor Show
Internationaler Auto-Salon Genf
Suisse - Schweiz - Switzerland
Maart 2017
Audi Quattro Concept en el Salón de París 2010: www.diariomotor.com/2010/10/02/audi-e-tron-spyder-y-quatt...
@ San Diego International Auto Show 2007.
The Trailhawk concept is based on the redesigned four-door Wrangler with all its off-road credentials. But the interior is designed to be more comfortable, and the exterior more modern. Fully retractable side windows with no B-pillar, and a retractable roof over the cargo area give the Trailhawk the open-air feel of a soft-top Jeep. A single knob works like a computer mouse controls the navigation system. The center console slides from the front to the rear seats and back on a suspended rail, and there are four cup holders in the fold-down tailgate. The Trailhawk is powered by a 3.0-liter BlueTec diesel engine from Mercedes-Benz and uses a 5-speed automatic transmission.
Maquette
Introduit au salon de Francfort en 1981, le concept car Xenia basé sur une plateforme de BX pas encore dévoilée (une affaire de mois), frappera par sa modernité extérieure comme intérieure. Dessiné par Trevor Fiore, ce break monocorps aux immenses portes-papillon, d’une forme très cubique et futuriste dispose d’un intérieur digne d’une navette spatiale. Il rencontrera un immense succès et bénéficiera d’une littérature prolixe dans les journaux et revues spécialisés. En effet, bien avant l’heure, il explorera le concept de segment croisé en couplant un design sportif de coupé deux portes, avec un coffre de break et un intérieur de monos-pace. Une étude très intéressante qui a été espionnée avec soin par tous les autres constructeurs de la planète. Citroën Heritage propose ici non le concept-car, pieusement conservé, mais sa maquette initiale de style. C’est avec cette sculpture, puisqu’il s’agit d’une vraie sculpture en clay (argile synthétique) peinte, que l’artiste a défini les formes exactes de la voiture. Cette sculpture pleine (vitrage aussi en argile) est posée sur un châssis avec de vraies roues. Vous avez ainsi la possibilité d’acquérir une œuvre d’artiste totalement unique et chargée d’histoire, futuriste, technologique et esthétique.
Estimated : € 15.000 - 25.000
Sold for € 7.280
Vente des Réserves de l'Aventure Peugeot Citroën DS
Leclere Motorcars - Maison des Ventes
Citroen Heritage
Batiment 6
93600 Aulnay sous Bois
France
December 2017
Following a same simple pattern I tried design many dresses or combinations for women fighters or princesses. They were done in 2003. I used a mix of pencils, markers and for some even nail polish.
I plan use some of them soon in MOCs.
Business and Financial Concept Background .
Creative Digital Illustrations,
Websites Designs, Brand Idintity, Print Design, Logo Design and more....
info@aprilagency.com
A. The Concept: I wanted to further downscale the Marissacam Jr. for ease in carry and reloading in the field. To combine three cameras into one that could record a triptych of images for one complete 360º circuit. (I know this has been done.)
The concept, to use the same 98mm diameter coffee can as a form for the main body/cylinder and the Muir Glen soup can (84mm dia.) as a form for the 3 internal segments. My intent was to upgrade construction by capping with plywood and surfacing the cylinder with a wood veneer.
I purchased a variety of ply thickness and veneer from Rockler (woodworkers supply) on Denver's Colorado Blvd. It's across the boulevard from a Michael's Crafts.
B. The Sidetrack: After my Rockler purchase, I stopped in Michael's to see if there was anything of camera possibility.
They had these Candle kits in the clearance section for a dollar. In addition to wax and wicks, there are two (silver color) tins in the kit, 60mm dia. x 44mm high.
They also had 75mm dia. color tins for $1 each.
Hmmm....
Final Design Sketches and Concepts
Concepts were the results of some triggeres that were
Design Ideas:
1.Design Ideas-Brainstorming!
2.Accounting in the meter for the driver to set himself targets and meet them
3.Portable meter (He should be able to carry it home)
4.Advertising on the meter, for a additional income
5.Meter cost can be sponsored by ads, making the meter free of cost for
the driver
6.Driver based usage account (Login system), customizable
7.Should accept credit cards
8.Can support electronic money transfer
9.Should give location specific info (traffic, nearby restaurants,
respective ads
10.Entertainment for passengers
11.Continuous feedback for the passenger on the journey
12.Can the meter turn itself on when the passenger boards
13.Vigilance to help police
14.Scanning of passengers goods, drivers uniform
15.Attractive displays/visuals
16.Data mine location/time/day of where passengers can be found (capture
when the meter is started )
17.Make hot spots near stands where taxis can be alerted within a radius
18.Customizability (physical) skinning of meters
19.Keep records of passengers and travels as a means of building
relationships between passengers & drivers
20.Make taximeters as a PCO phone
21.Emergency buttons to call in time of accidents
22.Inbuilt planner/scheduler to keep track of advanced bookings
23.Inbuilt maps
24.WiFi like connectivity between taxis
25.Make meter, passenger specific (RFID incorporated)
26.Prepaid travel cards for the meters where, the fare charging is done
on swipe on boarding and leaving
27.Customized fares
28.Keeping account of fueling
29.Money scanner
30.Electronic and mechanical modes of operation in case of failure
31.Every taxi is a post man/box
32.Vending of sweets, stamps on the taxi
33.Provision of getting messages from agencies and home
34.Virtual postage boards
35.Quote-a-fare (an estimate), to know fore-hand if one can afford the
journey
36.Automatic braking in the event of a collision
37.Electronic documentation of licenses, permits, PUC, insurance
38.Hypothecation of the taxi/meter by banks to eliminate middlemen
39.Multipart meters
40.Take photographs of passengers, to use for security and accounting and
playback for owner
41.Plug-in and play your own content, download your own content
42.Mobile phone charger
43.Meter can keep records of past performance of the driver for
hypothecation and finance planning
44.Help maintenance of part indicating failure, wear and tear
45.Take pictures and videos and sell them to passengers burn it on a disc,
printout
46.Meter should show current vehicle speed to the passenger
47.Meter can give discounts on fare to encourage competition
48.Multi-lingual meters
49.Catch cops taking bribes on camera and take authentic pictures of
accidents
50.Luggage charges
51.Give control of the camera to the passenger (to take pictures of famous
place on the way )
52.Meter can show estimated time of arrival (ETA), like a progress bar
53.Unlimited travel scheme on prepaid card (day card, week card, monthly )
54.Proximity sensing to avoid collision
55.Method to trace lost and found belongings
56.Alert the availability of food & refreshments en route
57.Store contact details (phone no) of the passenger in case of lost and
found items
58.Finding a place in a map
59.Difference in Meter On and Meter Off. All additional revenue channels
put off when meter off to encourage the driver to put on the meter
60.Meter should be able to communicate the emotion of the driver
61.Memory space where people can upload and share data
62.Visitors book in the default mode
63.Taxis as delivery persons to get things for passengers
64.News as a scroller bar on the taxi
65.Discounts on familiar routes preferable to the driver
66.Wake up alarm in meter
67.Driving guidance for the driver
68.Print bills could be used for advertisements
69.Cinema information in the meter, also allowing for booking tickets
70.WiFi system, which enables taxi drivers to communicate (meet for
lunch), passing on of passenger
71.Pairing up of frequent passengers and drivers on the same route
72.Enable a city wide share taxi. Co-ordination between passengers to
share a taxi
73.Show the drivers driving experience, driver rating. (Good drivers can
charge more )
74.Central server calculation of fare (tamper proof)
75.Tag two autos to synchronize the journey
76.Past experience could be used to charge in case of meter failure
77.Payment through card can eliminate driver cheating the passenger
78.Record lane cutting, signal jumping, etc and use that for driver rating
79.Profile of journey and passengers for customized journey. (Speed,
economy, tourist, etc)
80.Advance booking
81.Buy train tickets in the auto meter
82.Health of the driver should be tracked
83.Meter and vehicle identity should match (security)
84.Mumbai darshan tourist package, prefixed fare.
85.Locate a taxi and negotiate a rate to fix a fare
86.Luggage fare should be transparent, based on the weight
87.In case of shared taxi, meter should display individual fares based on
where people get down
88.Multiplayer games between taxis
89.Discount while fueling for the passenger
90.Rating of the taxi based on the condition and history of violation(Well
maintained taxis can charge more)
91.Deluxe comfort available in ordinary taxi.(towels,tea,wash etc)
92.Informing drivers about the availability of passengers, and average
chargers, ability to plan which time of the day to work etc
93.Dos and Donts for new drivers on car maintenance, driving etc
94.New passengers should not get cheated
95.Default operations should be very simple and easy to do for anyone
96.Banks can charge flexible EDI(Equated daily installment) instead of EMI
97.Change of routes should be updated depending on conditions
98.Remote braking for enforcement authorities
99.Flashing lights on the meter for attracting passengers
100.Union can actually work and help the drivers
101.Automated streamlined way of paying fine, automatic deduction of money
102.Instead of deducting money for a fine provide a free journey to needy
passengers
- CONTACT -
FB: fb.com/dndyearbook
Phone: 0886 199 899 - 0963 951 132
Address: Số 15, ngõ 22/28, phố Tứ Liên, Tây Hồ, Hà Nội
Support this project on LEGO Ideas: ideas.lego.com/projects/131464
The Astrosurfer: an atomic-powered intergalactic sports car, accompanied by the hit new space rock band The Highway Stars! This epic futuristic vehicle is detailed and articulated with wheels, rubber tires, hinged doors, reclining seats, and with access to the car’s trunk. On the hood of the car is a metallic minifigure hood ornament, and underneath is a detailed engine. In the rear of the car are two folding jet engines, a set of tailpipes, a spoiler, and an Octan bumper sticker.
Background: this project was initially conceived back in fall 2015, during my long, imaginative train of thought. In late November of 2015, I took some photos of my Futuron minifigs in front of Christmas lights for an artistic bokeh effect. This led me to come up with the idea of taking a group shot of a few spacemen hanging out as friends, accompanied by lyrics from the Ramones song “I Just Want to Have Something to Do.” This soon evolved into the idea of making each of the spacemen as musicians in a fictional band, that was inspired by the music video for the aforementioned song — which starts off with the Ramones playing the song in the back of a car. With this concept in mind, in early December I took a photo of some Futuron minifigs playing instruments in front of Christmas lights. Upon releasing this photo, I was then struck with another bolt of inspiration while watching the music video for Monster Magnet’s “Negasonic Teenage Warhead“: towards the end of the video, the band takes off in a purple classic Buick and flies through space! This idea hit me, and that night I had a dream to build a futuristic space sports car being driven by a rock band — essentially an amalgamation of those videos by the Ramones and Monster Magnet, along with my previous LEGO space photography!
Production for this creation began immediately after Christmas 2015, as I was preoccupied in December with production of my LEGO Nutcrackers and electronic Mega Man sprite. The bulk of this model was completed in the middle of January, but unfortunately I ran into one tiny (yet major) obstacle: I wanted a Classic Space symbol flag for the car’s antenna, however the Collectible Minifigure that contained this particular part wasn’t available in the United States yet. It wasn’t until early February that these figures were available (scarcely) at my local Toys ‘Я’ Us in Whitestone. I felt up all of the packages, and managed to snag the very last astronaut, thus obtaining that seemingly-insignificant flag for the antenna!
The five astronauts are made from authentic Classic Space minifig bodies, hence the noticeable play wear in their insignia. I did however deviate by giving them helmets with color-coordinated visors, as well as contemporary faces. The instruments were from other Collectible Minifigure sets, with the exception of the drum kit. For the car’s design, I initially wanted to build an accurate replica of a 1957 Chevrolet Bel-Air or perhaps a Cadillac Eldorado — but instead, I opted to make an original design of an arbitrary concept. The two-tone color scheme wasn’t intentional: I wanted to make the car solid pink, but had to instead make use with available pieces in the pink/purple color family.
Prototype source image - "Space Truckin'": www.flickr.com/photos/baronvonbrunk/23438359150/
"I Just Want to Have Something to Do" by the Ramones: www.youtube.com/watch?v=eRwek-qyyeM
"Negasonic Teenage Warhead" by Monster Magnet: www.youtube.com/watch?v=aKj5cJ9_KSg
"The design principle „Impressions of Flow“ of Borgward ISABELLA Concept embodies the future focus of the entire Borgward company with regard to its design DNA and drive technology."
IAA 2017
Internationale Automobil-Ausstellung
Frankfurt
Duitsland - Germany
September 2017
Concept art done for Installation 01, a Halo fan game. These were revealed in our new media page on our recently revealed website installation01.org/media