View allAll Photos Tagged Coating
New Car Prep and 22PLE treatment on a Subaru BRZ. Orlando Authorized Installation Center for Glass Coatings
Garage Cabinets, Garage Storage, Custom Garage Cabinets, Garage gear, Garage Floor coating, Garage epoxy coating, Garage wall cabinet, Custom Garages, Dallas, Fort Worth, McKinney, Allen, Frisco, Southlake, Keller, www.customgarageworkstx.com Garage Makeover, Garage remodel
These are a few pics of some of the work we do, we do custom coating on auto, motorcyclr, atv, and any metal parts!! This is far better than your normal paint, last much longer and is more durable, the prices are reasonable and done in a timley manner
The best Non-Solvent Ceramic Coating. No harsh fumes, no mask or respirators. Easy to use / Eco Friendly Formula. Super-hydrophobic, Super glossy. Forms a very durable coating that lasts over up to or more than 5 years. Pencil hardness test confirms “Greater than 9H” hardness. Tests conducted by SGS and Assured Testing Services. Contact David today @ Dave@PearlUSA.net, call 1-866-285-1051 or Visit us: www.pearlnano.com
This plant is perfectly prepared for the current cold snap. Last year it flowered in February - I intend revisiting often to watch its progress. It's a stunner in its own subtle way.
*Note added 5 Feb 09.
See what it looks like 2 months later.
Detailing Dynamics is well placed to take advantage of this trend on behalf of its clients. More to the point, we were among the first to push towards brake caliper powder coating in Long Island enthusiasts’ cars. Before long we were doing the same for clients in New York City, New Jersey, and Connecticut.
Address : 66 Windsor Ave, Mineola, NY 11501, USA
Phone : (516) 747-4114
Official Website : https://detailingdynamics.com
Cleaning of 100 years of oil, ink, crud and paint, has left a few pitted areas / casting flaws that have been finely filled for a smoother finish.
--
Gloss = too new and shinny looking.
Matt = appears too flat and shows up every finger/oil mark.
Need to achieve a finish that is close to the original pre-1960's finish and one that doesn't appear 'just painted' with a wet-gloss feel.
Testing the brush coat drying time with a wet clear coat (spay) on the right lower body/stand section of the press.
... It seems, recoating a wet clear coat when the base coat has had flash time of 1 hour, dulls down the high gloss sheen. Although not as easy as is sounds! The 'alligatoring' paint defect happen when flash times, film-builds and the ambient temperature aren't perfected (sure am finding out the hard way!)
Bought the car new in '90, hand built in my garage over the last three years. Jet-Hot coated headers, cross over pipe and turbo exhaust housing. Ford BOSS 347ci. w/ 88mm turbo and PowerGlide Performance (mild tune) - True Street, 275 class, XDR-TT-5. 1/4 mile 9.01 @ 158 mph 1/8th mile 5.74 @ 128 mph Featured in Muscle Mustang and Fast Ford Magazine.
Single interface anti-reflective coating performance @ ~550 nanometers
Green curves are for uncoated crown glass w/ index of refraction n~1.52
1-layer curves are for 1/4 wave layer of MgF2 (n~1.38)on Crown Glass (n~1.52).
The two layer mult-coating of two 1/4 wave layers of MgF2 (n~1.38) & SF8 (n~1.7) on crown glass.
The dashed lines are for TE or s-polarization and solid lines are for TM or p-polarization.
The two dips at ~50 & 56 degrees occur at the Brewster angle where the TM wave component is preferentially transmitted into the lens. This dips at the Brewster angle aren't too useful in lens design because the reflectance of the TE component dominates. e.g. It's better to be on orange curves than either the blue or green curve even at the Brewster angle.
The BAOER series wear-resistant ceramic dope is a kind of jelling material. As the materials are formed through special treatment and strict control, plus a series of chemical reactions, this dope can have extremely high intensity and hardness in normal temperature, meeting the standards of bonding strength of ceramics. The product, thus, gets its name. This wear-resistance ceramic dope is mainly composed of aggregate, tiny bonding powder, nanometer, micron, and so on. The particles densely pile up, making its intensity in normal temperature exceed 150-180 MPa, with the highest as 210 MPa. The materials are formed by ionic compound and synthesized covalent compound, combined with intensification measures and special chemical integration, thus reaching high intensity and rigidity, which can effectively resist the wallop and shearing stress of materials. The toughness and intensity of this dope is reliability, thus effectively avoiding dilapidation and flake off. Besides, the multiple measures to strengthen its intensity effectively improve its dynamic capability. The low-expansion coefficient stabilizes its bulk, so there is seldom crack. Furthermore, the jointless construction method greatly enhances its integrity. The raw materials are able to bear acid and alkaline, so this dope has stable capability, making it impossible to have chemical reaction with the medium. Meanwhile, the most of the raw materials are synthesized in high temperature. Therefore, the crystalloids are well-formed, and suffer no influence from the environment, so it is one of the best inert materials, thus effective resisting the action of medium and various kinds of chemical erosion. Specifically, the main features of this product can be summarized as follows.
1. This wear-resistant ceramic dope of our company is an independently invented and produced patent product. Its patent number is 200710078149.1.
2. This product enjoys excellent adhesive force. Besides the adoption of tortoise shell steel mesh instead of linear steel mesh greatly lessens linear expansion, thus making the integration of wear-resistant ceramic dope, steel mesh, and the base firm.
3. The capability of this wear-resistant ceramic dope is far better than those products like wear-resistant gumming dirt, pounding materials etc. During the process of construction, pure water is added instead of glue water. The high intensity and high capability of wear resistance are achieved through a series of physical and chemical reactions among raw materials.
4. This product has excellent diffusibility, homogeneity, and high intensity in constructing.
5. This product enjoys high intensity and good toughness, with its pressive strength as high as 210 MPa, and folding strength as high as 50 MPa.
6. This product is able to endure high temperature, as high as 1800.Its wear-resistant capability in high temperature is unbeatable by any other wear-resistant product so far.
7. This product has outstanding wear-resistant capability, and enjoys a long life-span. Compared with the common steel plate, this wear-resistant ceramic dope with the same thickness can be used more than 6 times longer.
8. This product boasts outstanding price performance ratio. The use of wear-resistant ceramic dope can greatly reduce the cost, thus enjoying prominent economical benefits.
9. The construction process is convenient. As for the maintenance of this product, the advantage is also evident. Almost no disassembling is required for the treatment of all wear-resistant parts, which can significantly reduce the cost and time of maintenance.
10. This product an be used widely. No matter which industry it is, as long as theirs is treatment involves the wear and tear in high or low temperature, this product can serve the occasion.
In all, the wear-resistant ceramic dope of our company enjoys its unique advantages and features in whichever aspect as advancement in technology, reliability in capability, economical benefits in life-span, and convenience in construction. We, therefore, warmly and sincerely welcome every client to differentiate and choose our products.
The Tamron 18-250 and Pentax DA 18-250 (two versions of the same lens design). But maybe the coatings are different? Tamron on left, Pentax on right.
Description:Despriptions of polymer and coating classes in the student bulletin.
Date of Original 1960
Item Number library_display_coatings_polymers_fall_2012_catalog_1960_003
Ordering Information: library.ndsu.edu/archives/collections-institute/photograp...
Powder Coating Gun by PSS & Powder Buy The Pound. PSS SPECTRACOAT™ ES03 SYSTEM W/ FARADAY WAVE™ BOARD
This car was purchased out of the jaws of the car crusher at a salvage yard. The car was fully restored by me and some close and talented friends that helped with the paint and transmission… I built the 455 Stage 1 Buick engine and completed the restoration myself. As you can see Jet-Hot was the first choice for any coatings that were added to the car. The intake, headers, power steering pump and brackets were all Jet-Hot coated and have performed flawlessly for the last 15 years. This car has placed first in countless car shows. I have promoted Jet-Hot everywhere I take this car. You would not believe how many people do not know that intakes can be done among other parts. I hope the above pictures will give you an ideal of how much I appreciate Jet-Hot. Your product not only looks great it performs just as well… - Mark Smith
A shot of the new Montblanc Summit. Customers who at this boutique, if they fully pay for one of these watches, can expect delivery some time in May 2017. I preferred the shiny black coating with an additional green strap. MAC preferred the blue Sfumato strap.
www.montblanc.com/en-ca/collection/watches/montblanc-summ...
www.montblanc.com/en-ca/collection/watches/montblanc-summ...
Montblanc Summit is the first smartwatch combining fine Swiss watchmaking codes with the most advanced wearable technologies. The design is inspired by the award-winning 1858 collection and the heritage of Minerva as one of Switzerland’s most revered timekeeping specialists. The spirit of the watch manifests itself through the Montblanc digital watch faces: the elegant 1858 collection, a summit-shaped fitness watch face to track daily goals and a minimalistic urban watch face, among others. Each classic complication can be turned into a digital complication providing useful information like next meeting or fitness stats. The 46 mm case made of PVD-coated stainless steel with satinated finishing is water resistant (IP68 standard) and only 12.5 mm thick. It features the first domed sapphire crystal glass made for a smartwatch, covering a high-resolution AMOLED full round touch display for the finest visual experience, one of the most advanced processors, a heart rate monitor complemented with several fitness tracking sensors, a barometer for altitude, a microphone for voice controls and a battery delivering one full day of use per charge. The internal memory and Bluetooth connectivity enable wireless streaming and control of music directly from the watch. The Montblanc pusher housed in the iconic stainless steel crown ensures ease of use and style at the same time. Combining advanced performance, simple navigation and compatibility with iPhones as well as Android smartphones, the cutting-edge Android Wear 2.0 operating system delivers higher productivity and functionalities. Check important information at a glance, reply by text or voice, save time with smart help or voice-enabled assistance and follow your fitness programme whether it is walking, running or bike riding. Experience true travel companionship with exclusive pre-loaded travel apps and explore more with the thousands of apps available via direct WiFi download. Montblanc Summit is a testament to a vintage yet contemporary digital dimension, a message also expressed through the stylish and functional black rubber strap, which comes with a quick release system for easy exchange.
Ident Number: 117537
Material: Black PVD-coated stainless steel