View allAll Photos Tagged weighingsolution
Smethwick based Avery Weight-Tronix DAF XF 460 euro 5 coupled to a three axle King semi trailer loaded with test weights & a fork lift parked in Windham road Sudbury
The installed system is accurate and easy to view On Board Weighing Solutions. The product of monitoring allows fleet monitor to control loads on movement, driving down haulage costs and improves productivity.Our products include Wheel Loader Weighing, Excavator Weighing, Dumper Payload Monitoring System, Truck On Board Weighing, Forklift Weighing, Reachstacker Weighinng, Grapple Weighing, Underground Truck Weighing and LHD Underground Loader Weighing. Aditya offers well-planned design with the help of experts as per industrial needs.
This fully welded stainless steel bending beam load cell is hermetically sealed to IP68 / IP69K and can be used in the harshest industrial environments. It is suitable for weighing platforms, bag fillers, belt weighers and tank weighing in the Food Processing, Chemical, Pharmaceutical and general Bulk Handling industries. OIML C3 or C6 approved versions areEjercicios de musculación: musculación: flexiones de bíceps con barra de pie motivación épica para el culturismoavailable. A 6 wire cable (with sense wires) is supplied as standard.
Features
T66 load cells are available with ATEX certification for all Gas and Dust zones. ATEX certification for Dust zones 20, 21 and 22 does not require safety barriers, saving substantial cost. For applications in aggressive environments where stress corrosion or acid attack is an issue, a special Parylene coating can be specified as an option. High temperature variants for continuous operation in environments up to 150˚C are also available.
• Stainless steel load sensor
• Hermetically sealed, fully welded construction
• High durability Polyurethane cable
• IP68 / IP69K Protection
• 3000 divisions OIML R60 Class C
• Option: 6000 divisions OIML R60 Class C
• 5 year warranty
• High Integrity cable entry
• 4 wire option available according to order
• Available in high temperature version
• Available in Atex / Ex version
• Available with optional Parylene coating
This fully welded stainless steel bending beam load cell is hermetically sealed to IP68 / IP69K and can be used in the harshest industrial environments. It is suitable for weighing platforms, bag fillers, belt weighers and tank weighing in the Food Processing, Chemical, Pharmaceutical and general Bulk Handling industries. OIML C3 or C6 approved versions areEjercicios de musculación: musculación: flexiones de bíceps con barra de pie motivación épica para el culturismoavailable. A 6 wire cable (with sense wires) is supplied as standard.
Features
T66 load cells are available with ATEX certification for all Gas and Dust zones. ATEX certification for Dust zones 20, 21 and 22 does not require safety barriers, saving substantial cost. For applications in aggressive environments where stress corrosion or acid attack is an issue, a special Parylene coating can be specified as an option. High temperature variants for continuous operation in environments up to 150˚C are also available.
•Stainless steel load sensor
•Hermetically sealed, fully welded construction
•High durability Polyurethane cable
•IP68 / IP69K Protection
•3000 divisions OIML R60 Class C
•Option: 6000 divisions OIML R60 Class C
•5 year warranty
•High Integrity cable entry
•4 wire option available according to order
•Available in high temperature version
•Available in Atex / Ex version
•Available with optional Parylene coating
This digital stainless steel self-centering rocker column load cell is fully welded and hermetically sealed, with protection to IP68/IP69K. It is an ideal solution for weighbridges/truck scales thanks to brysttrening for messe: golden era bodybuilding its approvals to OIML C4 (4000 divisions) and NTEP Class III L, as well as lightning surge arrestors and a tough, durable polyurethane cable. It has an open protocol, so it can be used with virtually any weight indicator.
Features
Digital load cells possess many advantages, compared with analogue load cells – such as much faster and simpler corner adjustment, as well as individual load cell fault diagnostics.
For use in weighbridges/truck scales, a range of mounting cup accessory sets are available as optional items, in either stainless steel or nickel plated alloy steel, along with a rubber gaiter, sealing clip and a set of centering discs. The T34D digital load cell can also be used for the weighing of silos, vessel and tanks weighing when individual load cell fault diagnostics are required, for these applications the Silo Mount accessory is preferable. For applications in aggressive environments where stress corrosion or acid attack could be an issue, a special Parylene coating can be specified as an option. Also available as an option is a High Temperature version.
•Open digital protocol
•Fully welded and hermetically sealed to IP68/ IP69K
•In-built surge arrestors for lightning protection
•Simple and fast installation
•Configuration and software can be updated using serial interface
•Self-centering rocker column design with anti-rotation pin
•Approval to OIML R60 C4 (4000 divisions)
•Mounting cup accessories available, as well as silo mount
•Digital interface RS485 (full duplex)
•3 year warranty
•Load Cell Capacity Available 15 / 30 / 40 / 60 Tons
Advantages of the digital T34D load cell over the analogue T34 load cell:
•Higher resolution (up to 1,000,000 steps from zero to full scale)
•Intelligent compensation for each individual load cell
•Easier, faster maintenance with continuous, individual self-diagnosis
•Direct PC connection via RS485 bus and RS232 converter, up to 1200 meters away
•Internal signal filtering
•Higher protection against EMC interference
•Simpler and faster corner adjustment
•Remote diagnostics via modem using direct PC connection
Ideal for applications with mixing, agitation and vibration, this stainless steel assembly is designed to reduce the vibration transmitted to the load cell. It is typically used in weighing platforms, big bag (FIBC) filling, belt weighers and hopper/tank weighing in the Food Processing, Chemical, Pharmaceutical and Bulk Handling industries.
Features
The stainless steel, OIML C3 approved, model T85 load cell used in this anti-vibration weighing assembly is fully welded and hermetically sealed for protection to IP68 and IP69K, allowing it to be used in extremely harsh environments. The complete assembly consists of a load cell, mounting stud, baseplate with spacer and stainless steel/elastomeric anti-vibration disc.
ATEX certification for both gas and dust zones, is available for the T85 load cell. To reduce costs, certification for use in dust zones 20, 21, and 22 without safety barriers is available. For applications in aggressive environments where stress corrosion or acid attack is an issue, a special Parylene coating for the load cell can be specified as an option. Other options are custom load cell cable lengths for volume OEM customers and a version for high-temperature use.
This digital stainless steel self-centering rocker column load cell is fully welded and hermetically sealed, with protection to IP68/IP69K. It is an ideal solution for weighbridges/truck scales thanks to its approval to OIML C4 (4000 divisions), as well as in-built lightning surge arrestors and a tough, durable polyurethane cable.
Features
It has an open protocol, so it can be used with virtually any weight indicator. Anti-rotation is achieved by means of 2 flat faces on either side of the load cell base, with corresponding flat faces in the lower mounting cup. Digital load cells possess many advantages, compared with analogue load cells – such as much faster and simpler corner adjustment, as well as individual load cell fault diagnostics.
For use in weighbridges/truck scales a set of zinc plated steel mounting adapters, centering discs and bolts is available as an optional item. For applications in aggressive environments where stress corrosion or acid attack could be an issue, a special Parylene coating can be specified as an option.
• Open digital protocol
• Fully welded and hermetically sealed to IP68/IP IP69K
• In-built surge arrestors for lightning protection
• Simple and fast installation
• Configuration and software can be updated using serial interface
• Self-centering rocker column design with anti-rotation faces
• Mounting cup accessories available
• Digital interface RS485 (full duplex)
• 3 year warranty
• Load Cell Capacity Available 30 / 40Tons
Advantages of the digital T35D load cell over the analogue T35 load cell:
• Higher resolution (up to 1,000,000 steps from zero to full scale)
• Intelligent compensation for each individual load cell
• Easier, faster maintenance with continuous, individual self-diagnosis
• Direct PC connection via RS485 bus and RS232 converter, up to 1200 meters away
• Internal signal filtering
• Higher protection against EMC interference
• Simpler and faster corner adjustment
Remote diagnostics via modem using direct PC connection
Incorporating the latest up-to-date electronics, the Model XT2000 is a high performance display indicator and high speed data transmitter suitable for static and dynamic weighing. It is specially designed for process weighing systems, as well as all types of machinery with weighing as part of their function.
Features
Because of its panel mount design and versatility of digital input/output and data transmission options, it is ideally suited to connection to PLCs, PCs and remote systems. Using the optional flexible cover, IP65 protection is possible.
Typical applications include: weighing and level measurement of tanks and silos, industrial scales, filling and dosing machines, animal weighing, high speed sorting scales and multi-head weighers. The integrated check weigher application, coupled with the high speed data capture rate of 2400 measurements/second, also makes the XT2000 ideal for use in check weighing and other dynamic applications.
Calibration can be accomplished either by using real weights or by using the load cell sensitivity in mV/V, allowing for fast start-up and commissioning.
Five versions are available; the basic version has digital I/O, RS232 and RS485; 4 further versions add either analogue outputs, PROFIBUS, PROFINET or Ethernet/IP communications.
•Bright, 6 digit, 10mm LED display
•High resolution with 24-bit ADC and 16,000,000 internal divisions
•2400 measurements per second
•Configuration and calibration using software or integral keypad
•Calibration protection by software or mechanically
•Powers up to 8, 350Ω or 16, 700Ω load cells
•RS232 and RS485 (Modbus RTU and ASCII) and optional PROFIBUS, PROFINET or Ethernet/IP
•Configurable analogue outputs: 0-5V, 0-10V, 0-20mA and 4-20mA, with galvanic isolation
•3 digital opto-isolated inputs and 3 digital outputs to relay, with status LEDs
•Panel cut-out size 92mm W x 45.5mm H
•10-28 V DC power supply. Optional AC-to-DC adapter available.
T35 (Analog) Load Cell
This stainless steel self-centering rocker column load cell is fully welded and hermetically sealed, with protection to IP68/IP69K. It is an ideal solution for weighbridges/truck scales thanks to its approval to OIML C4 (4000 divisions), as well as in-built lightning surge arrestors and a tough, durable polyurethane cable. Anti-rotation is achieved by means of 2 flat faces on either side of the load cell base, with corresponding flat faces in the lower mounting cup.
Features
Corner correction at the junction box is minimized because the T35 is pre-corner adjustment optimised at +/- 0.05% by output current calibration (in mV/V/Ω). This saves a significant amount of time during commissioning.
For use in weighbridges/truck scales a set of zinc plated steel mounting cups, centering discs and bolts is available as an optional item. For applications in aggressive environments where stress corrosion or acid attack could be an issue, a special Parylene coating can be specified as an option. The T35 is also available with a High Temperature option.
• Stainless steel load sensor
• Fully welded and hermetically sealed to IP68/IP69K
• In-built surge arrestors for lightning protection
• Calibrated in mV/V/Ω for pre-corner adjustment optimization
• Simple installation
• Self-centering rocker column design with flat anti-rotation faces
• Approval to OIML R60 C4 (4000 divisions)
• Mounting cup accessories available
• High Temperature option available
• 3 year warranty
• Load Cell Capacity Available 30 / 40Tons
This stainless steel self-centering rocker column load cell is fully welded and hermetically sealed, with protection to IP68/IP69K. It is an ideal solution for weighbridges/truck scales thanks to its approvals to OIML C4 (4000 divisions) and NTEP Class III L, as well as lightning surge arrestors and a tough, durable polyurethane cable.
Ideal for applications with mixing, agitation and vibration, this stainless steel assembly is designed to reduce the vibration transmitted to the load cell. It is typically used in weighing platforms, big bag (FIBC) filling, belt weighers and hopper/tank weighing in the Food Processing, Chemical, Pharmaceutical and Bulk Handling industries.
Features
The stainless steel, OIML C3 approved, model T85 load cell used in this anti-vibration weighing assembly is fully welded and hermetically sealed for protection to IP68 and IP69K, allowing it to be used in extremely harsh environments. The complete assembly consists of a load cell, mounting stud, baseplate with spacer and stainless steel/elastomeric anti-vibration disc.
ATEX certification for both gas and dust zones, is available for the T85 load cell. To reduce costs, certification for use in dust zones 20, 21, and 22 without safety barriers is available. For applications in aggressive environments where stress corrosion or acid attack is an issue, a special Parylene coating for the load cell can be specified as an option. Other options are custom load cell cable lengths for volume OEM customers and a version for high-temperature use.
This digital stainless steel self-centering rocker column load cell is fully welded and hermetically sealed, with protection to IP68/IP69K. It is an ideal solution for weighbridges/truck scales thanks to its approval to OIML C4 (4000 divisions), as well as in-built lightning surge arrestors and a tough, durable polyurethane cable.
Features
It has an open protocol, so it can be used with virtually any weight indicator. Anti-rotation is achieved by means of 2 flat faces on either side of the load cell base, with corresponding flat faces in the lower mounting cup. Digital load cells possess many advantages, compared with analogue load cells – such as much faster and simpler corner adjustment, as well as individual load cell fault diagnostics.
For use in weighbridges/truck scales a set of zinc plated steel mounting adapters, centering discs and bolts is available as an optional item. For applications in aggressive environments where stress corrosion or acid attack could be an issue, a special Parylene coating can be specified as an option.
•Open digital protocol
•Fully welded and hermetically sealed to IP68/IP IP69K
•In-built surge arrestors for lightning protection
•Simple and fast installation
•Configuration and software can be updated using serial interface
•Self-centering rocker column design with anti-rotation faces
•Mounting cup accessories available
•Digital interface RS485 (full duplex)
•3 year warranty
•Load Cell Capacity Available 30 / 40Tons
Advantages of the digital T35D load cell over the analogue T35 load cell:
•Higher resolution (up to 1,000,000 steps from zero to full scale)
•Intelligent compensation for each individual load cell
•Easier, faster maintenance with continuous, individual self-diagnosis
•Direct PC connection via RS485 bus and RS232 converter, up to 1200 meters away
•Internal signal filtering
•Higher protection against EMC interference
•Simpler and faster corner adjustment
•Remote diagnostics via modem using direct PC connection
Mild steel load sensor. Fully welded and hermetically sealed to IP68/IP69K.
Features
•In-built surge arrestors for lightning protection.
•High durability Polyurethane cable.
•Simple installation.
•5 year warranty.
•Self-centering rocker column design with anti-rotation pin.
•Approval to OIML R60 C4 (4000 divisions) up to 60t.
•Approval to NTEP Class III L up to 60t.
•Calibrated in mV/V/Ω for pre-corner adjustment optimization.
•ATEX and High Temperature options available
www.kantaking.com/la34siloassembly
www.flickr.com/photos/199447351@N02/53333977020/in/album-...
Mild steel load sensor. Fully welded and hermetically sealed to IP68/IP69K.
Features
• In-built surge arrestors for lightning protection.
• High durability Polyurethane cable.
• Simple installation.
• 5 year warranty.
• Self-centering rocker column design with anti-rotation pin.
• Approval to OIML R60 C4 (4000 divisions) up to 60t.
• Approval to NTEP Class III L up to 60t.
• Calibrated in mV/V/Ω for pre-corner adjustment optimization.
• ATEX and High Temperature options available
The T95 weighing assembly comprises a stainless steel high accuracy load cell, complete with a tough mounting accessory in painted alloy steel (optionally stainless steel up to 10t). Although the assembly is used in compression, the cell is mounted in a unique pendulum configuration and loaded in tension. This ensures that the load vector is always maintained through the central axis of the load cell, even when the assembly is subjected to considerable movement or misalignment.
Features
The T95 is most suitable for high accuracy applications where movement or vibration is present, e.g. mixers, agitators, catalyst vessels, weighing platforms, axle weighers and vehicle weigh-in-motion (WIM) systems. The T95 load cell is also available with ATEX and IECEx approval certification for all gas and dust zones. For applications in aggressive environments where stress corrosion or acid attack is a concern, a special Parylene coating can be specified as an option. Also available is an optional High Temperature variant, for operation up to 150°C.
• Stainless steel load sensor
• Fully welded and hermetically sealed construction to IP68/IP69K
• Simple installation
• Load cell is always in tension
• OIML C3 (3000 divisions) approval
• Tough and durable painted mounting accessory, with Stainless Steel option
• 5 year warranty
• Integral lift-off prevention
• Ideal in mixer and vibrating applications
• Unique damping feature
• Available Capacity 2000 / 5000 / 10000 Kg
This stainless steel shear beam load cell is available with approval according to OIML R60 Class C3 (3000 divisions) and is calibrated in mV/V/Ω by output current matching, which minimises corner correction time on multi-cell systems. The T85 is fully welded and hermetically sealed to IP68 and IP69K as standard. It can therefore be used in the harshest industrial environments and it’s typically used in weigh platforms, tank and vessel weighing, big bag (FIBC) filling systems, conveyors and machinery using weighing as part of its function. Capacities range from 300kg to 10,000kg.
Features
The Polyurethane cable provides excellent protection against chemicals, UV radiation, rodents and damage from cuts/impacts. ATEX approval* for all Gas and Dust zones is available as an option. The certification for dust zones 20, 21 and 22 does not require safety barriers, which creates a large cost saving. For applications in aggressive environments where stress corrosion or acid attack could be a problem, the T85 can be supplied with an optional Parylene coating. For high temperature applications, an optional version of the T85 is available for operation in environments up to 150°C (continuous temperature).
• Stainless steel construction
• 3000 divisions (Class C3) OIML R60 approval
• Calibrated in mV/V/Ω
• High integrity stainless steel cable entry
• 5 Year Warranty
• Industry standard dimensions and specifications
• Optional load feet and mounting accessories up to 5,000kg: patented LeverMount® and LA85 anti-vibration mount
• Options of Atex (EX) approval*, Parylene coating and high temperature version
• Wide operating temperature range.
• Capacity Available 300 / 500 / 750 / 1000 / 1500 / 2000 / 2500 / 3000 / 5000 / 7500 / 10000 Kg
Strain gauged load pins can easily replace an existing clevis, pivot pin or solid shafts in machinery or equipment to measure the load at that point. They are used in many diverse applications including cranes, winches, agricultural equipment (such as tractors), fishing, marine, offshore, subsea, aerospace, process industries, mining, hoisting gear, elevators and floor conveyors, cable laying machinery and many others. The load information provided by the pin can be used for process control, weight/force measurement, overload protection and safety related aspects. All Thames Side Sensors load pins are manufactured from special grades of stainless steel which are hardened to produce the best compromise between metrological and strength requirements.
Features
• Custom manufactured to replace existing pins normally without changes to the mechanical structure.
• Robust construction in high strength stainless steel with optional material certificate to EN 10204 3.1B
• Choice of locking systems to suit the application
• Fast delivery with 3D CAD drawings supplied for approval prior to manufacturing
• Externally gauged for IP66 or internally gauged for IP68 performance
• Working temperature from -20˚C to +90˚C
• High temperature option up to 180˚C
• Optional integrated amplifier for analogue outputs
• Single or dual output
• ATEX option
• Capacity up to 1000 Tons
This stainless steel self-centering rocker column load cell is fully welded and hermetically sealed, with protection to IP68/IP69K. It is an ideal solution for weighbridges/truck scales thanks to its approval to OIML C4 (4000 divisions), as well as in-built lightning surge arrestors and a tough, durable polyurethane cable. Anti-rotation is achieved by means of 2 flat faces on either side of the load cell base, with corresponding flat faces in the lower mounting cup.
Features
Corner correction at the junction box is minimized because the T35 is pre-corner adjustment optimised at +/- 0.05% by output current calibration (in mV/V/Ω). This saves a significant amount of time during commissioning.
For use in weighbridges/truck scales a set of zinc plated steel mounting cups, centering discs and bolts is available as an optional item. For applications in aggressive environments where stress corrosion or acid attack could be an issue, a special Parylene coating can be specified as an option. The T35 is also available with a High Temperature option.
•Stainless steel load sensor
•Fully welded and hermetically sealed to IP68/IP69K
•In-built surge arrestors for lightning protection
•Calibrated in mV/V/Ω for pre-corner adjustment optimization
•Simple installation
•Self-centering rocker column design with flat anti-rotation faces
•Approval to OIML R60 C4 (4000 divisions)
•Mounting cup accessories available
•High Temperature option available
•3 year warranty
•Load Cell Capacity Available 30 / 40Tons
Stainless steel compression load cell
Features
• Fully welded and hermetically sealed construction to IP68/IP69K
• Allows for thermal expansion and contraction of the vessel
• Integral jacking facility to lift accessory
• 1000 division accuracy option.
• Low profile, extremely compact mounting accessory.
• Integral lift-off prevention
• Allowance for angular misalignment
• 5 year warranty.
• Durable polyurethane cable with high resistance to chemicals, impacts and UV radiation.
• Optional Parylene coating for aggressive environments
The LeverMount® is a unique, well-established load cell weighing assembly that makes installation much simpler, safer and more cost-effective than traditional assemblies. Its innovative design allows for fast load cell installation without any jacking tools or dummy (false) load cells – even with a loaded tank/hopper. It is available in 3 sizes, with reference to the load cell capacity: LeverMount® Lite (5-200kg), LeverMount® 300-2500kg and LeverMount® 3000-5000kg.
Features
The load cell is stainless steel, fully welded and hermetically sealed with the highest levels of protection against harsh environments (IP68 and IP69K) and OIML R60 approval to 3000 divisions (C3) or 6000 divisions (C6) for use in legal-for-trade applications. A durable, chemical resistant polyurethane cable is fitted to the load cell as standard. Polyurethane provides greater resistance than PVC to chemicals, UV radiation, temperature changes, pressure cleaning and impacts.
Available load cell options consist of ATEX approval*, a high temperature version and special ‘Parylene’ coating for aggressive environments where stress corrosion or acid attack is a concern. The mounting accessory is available optionally with a self-centering ball-and-cup load introduction.
It combines a mounting accessory with an OIML approved load cell (bending beam or shear beam) protected to IP68 and IP69K, creating an ideal solution for legal-for-trade weighing applications requiring wash-down cleaning, even in hazardous (ATEX) areas.
The T85-N low cost shear beam load cell is ideal for applications where a fully welded, hermetically sealed, stainless steel load cell is not required. It is manufactured from alloy steel and nickel plated, with the strain gauged pockets protected by a silicone compound giving protection to IP66. This cell is typically used in weighing platforms, tank and vessel weighing, big-bag (FIBC) filling machines and conveyors. It is approved to OIML R60 3000 divisions and calibrated in mV/V/Ω by output current matching – which minimises corner correction time on multi-cell platform scales.
Features
•Nickel plated steel alloy load sensor
•Cost effective
•Silicone sealed to IP66; PVC cable
•3000 divisions OIML R60 Class C approval (C3)
•Simple low cost installation
•Calibrated in mV/V/Ω
•5 year warranty
•Industry standard configuration
•Optional load feet or mounting plate/spacer kit
•Optional anti-vibration loading assembly
•Capacity Available 300 / 500 / 750 / 1000 / 1500 / 2000
The LeverMount® is a unique, well-established load cell weighing assembly that makes installation much simpler, safer and more cost-effective than traditional assemblies. Its innovative design allows for fast load cell installation without any jacking tools or dummy (false) load cells – even with a loaded tank/hopper. It is available in 3 sizes, with reference to the load cell capacity: LeverMount® Lite (5-200kg), LeverMount® 300-2500kg and LeverMount® 3000-5000kg.
Features
The load cell is stainless steel, fully welded and hermetically sealed with the highest levels of protection against harsh environments (IP68 and IP69K) and OIML R60 approval to 3000 divisions (C3) or 6000 divisions (C6) for use in legal-for-trade applications. A durable, chemical resistant polyurethane cable is fitted to the load cell as standard. Polyurethane provides greater resistance than PVC to chemicals, UV radiation, temperature changes, pressure cleaning and impacts.
Available load cell options consist of ATEX approval*, a high temperature version and special ‘Parylene’ coating for aggressive environments where stress corrosion or acid attack is a concern. The mounting accessory is available optionally with a self-centering ball-and-cup load introduction.
It combines a mounting accessory with an OIML approved load cell (bending beam or shear beam) protected to IP68 and IP69K, creating an ideal solution for legal-for-trade weighing applications requiring wash-down cleaning, even in hazardous (ATEX) areas.
The T12A double bending beam single point load cell is ideal for high accuracy weight measurement with off-centre loads when the environment does not require stainless steel. Its nickel plated alloy steel construction, with silicone sealing to IP66, provides a cost-effective solution that is approved to 4000 divisions OIML R60 Class C. As standard, the T12A is supplied with a screened polyurethane cable; this provides a higher level of resistance to cuts and damage than a PVC cable. Typical applications include weighing platforms with dimensions up to 800mm x 800mm; bagging, filling and dosing machines; medical scales; check weighers; small bucket and hopper systems.
Features
•Nickel plated alloy steel load sensor
•Silicone sealed to IP66
•OIML R60 Class C 4000 divisions (C4)
•Cost-effective solution
•5 year warranty
•High accuracy with off-centre loads
•600×600 mm or 800×800 mm platform size (with load cell placed centrally under the platform)
•High durability Polyurethane cable provides higher resistance to chemicals than PVC
•Capacity Available 50 / 75 / 120 / 200 / 250 / 350 / 400
This folded bending beam load cell is manufactured from high quality tool steel, and fully sealed to IP67. Although normally utilised in tension, given the suitable adaptors and the appropriate application, it is possible to use the cell in compression or even in a bi-directional manner. The cell is typically used in tank and vessel weighing, bag filling machines, concrete batching equipment and conveyors.
Features
• High quality steel load sensor
• Fully potted & sealed to IP67
• Corrosion resistant
• Simple low cost installation
• Industry standard configuration
• 3 year warranty
• Suitable for use in tension, compression or bi-directional manner
• Optional proof tested eyebolts or rod end bearings
• Capacity Available 50/ 100 / 250 / 500 / 1000
Experience precision and speed with the Used Ishida CCW R214W 1S 08PB Multihead Weigher. Designed for small to mid size target weights, this 14 head Ishida scale delivers exceptional accuracy and consistency in every batch. Its advanced timing hopper and discharge chute maximize production efficiency, making it ideal for food packaging lines that demand performance and reliability. Each refurbished Ishida scale from High Tek undergoes expert testing to ensure long lasting quality and dependable operation.
Quick Solutions for electronic weighing instruments from Holtek, such as LCD/LED E-price scales, weighing scales and low power consumption weighing instruments. This electronic solution is for high-performance architecture and time-base function along with many other features such as sensor signal processing, industrial control, consumer products, and subsystem controllers. For more information and inquiry please visit @ bit.ly/2TxODmP
The Smart range of digital indicators provides a simple solution where a local display of weight is required. Three models are available at different price points to cover most requirements. Vessel weight indication problems solved simply and cost effectively.
Features
•User friendly configuration and calibration menu
•7 digit, high brightness, LED display
•Digital communications
•Linearizers function
•Multi-range for dual range and dual division
•High resolution; 100,000 external divisions
•OIML R76 and EN 45501 approved
•Excitation for up to 4×350Ω or 8×700Ω load cells
•IP65 stainless steel enclosure with mounting kit
•Configurable as a remote display
A ball type load cell is a transducer which converts the force exerted into measurable electrical outputs. There are umpteen of load cells, Ball Type Load Cells are the commonly used Load Cells used. These load cells are suitable for electronic truck scale, tail scale, ground scale, and other electronic weighing devices.
Features
• Digital output signal(RS-485 Half duplex)
• Baud Rate 9600
• Nominal load 10t-50t
• Dual-shear Beam
• Easy to install
• Alloy steel
The T12 double bending beam, stainless steel single point load cell is ideal for high accuracy weight measurement with off-center loads in harsh industrial environments. Its hermetically sealed and fully welded construction, with protection class IP68 and IP69K, is essential for use in applications involving regular wash-down at high temperatures and pressures, such as the food and pharmaceutical industries. It is approved to 3000 divisions OIML R60 Class C. The screened polyurethane cable with 6-wires (including sense wires) ensures that this load cell design is particularly insensitive to electrical noise. Typical applications include weighing platforms with dimensions up to 800mm x 800mm; bagging, filling and dosing machines; medical scales; check weighers; small bucket and hopper systems.
Features
•Stainless steel load sensor
•Hermetically sealed and fully welded to IP68/IP69K
•OIML R60 Class C 3000 divisions (C3)
•Noise-insensitive 6-wire connection with sense wires
•5 year warranty
•High accuracy with off-center loads
•600x600mm or 800x800mm platform size (with load cell placed centrally under the platform)
•High durability Polyurethane cable provides higher resistance to chemicals than PVC
•Capacity Available 15/ 20 / 30 / 50 / 75 / 120 / 200 / 250 / 350 / 400.
This suits to truck, track, tank and hopper weighing. This cell is designed to withstand rigorous shock loads prevailing in heavy duty weighments.
Features
• Material Stainless Steel
• Out Wire 4 or 6 Wires
• Sensitivity 2.00+/-0.005
• Cable Length 6 m, 12 m
This suits to truck, track, tank and hopper weighing. This cell is designed to withstand rigorous shock loads prevailing in heavy duty weighments.
Incorporating the latest up-to-date electronics, the Model XT1000 is a high performance display indicator and high speed data transmitter suitable for static and dynamic weighing. It is specially designed for process weighing systems, as well as all types of machinery with weighing as part of their function. Because of its DIN/Omega rail mount design and versatility of digital input/output and data transmission options, it is ideally suited to connection to PLCs, PCs and remote systems. Typical applications include: weighing and level measurement of tanks and silos, filling and dosing machines, checkweighers, animal weighing, high speed sorting scales and multihead weighers.
Features
The XT1000 is ideal for check-weighing and other dynamic applications, thanks to the integrated checkweigher mode and the high speed data capture rate of 2400 measurements/second. Calibration can be accomplished either by using real weights or by using the load cell sensitivity in mV/V, allowing for fast start-up and commissioning. Five versions are available; the basic version has digital I/O, RS232 and RS485; 4 further versions add either analogue outputs, PROFIBUS, PROFINET or Ethernet/IP communications.
• Bright, 6 digit, 10mm LED display
• High resolution with 24-bit ADC and 16 000 000 internal divisions
• 2400 measurements per second
• Configuration and calibration using software or integral keypad
• Calibration protection by software or mechanically
• Powers up to 8, 350Ω or 16, 700Ω load cells
• RS232 and RS485 (Modbus RTU and ASCII) and optional PROFIBUS, PROFINET or Ethernet/IP
• Configurable analogue outputs: 0-5V, 0-10V, 0-20mA and 4-20mA, with galvanic isolation
• 3 digital opto-isolated inputs and 3 digital outputs to relay, with status LEDs
• DIN/Omega rail mounting
• 10-28 V DC power supply. Optional AC-to-DC adapter available (DIN rail mounted)
The T20 stainless steel compression load cell is specifically designed as a reliable, simple, low cost solution for weighing of tanks, silos and vessels where level measurement is the main criteria. The load cell is mounted in either a zinc plated or stainless steel low profile, extremely compact mounting assembly which has integral jacking to allow load cell installation and removal, lift-off prevention and allowance for angular miss-alignment. The design is suitable for use either as a totally live system with load cells under all legs/support points of the vessel or where cost is paramount, in a dummy system with either one live and two dummy cells or two live and two dummy cells.
Features
•Stainless steel compression load sensor
•Fully welded and hermetically sealed construction to IP68 / IP69K
•Allows vessel expansion and contraction
•Integral jacking facility
•1000 division accuracy
•Low profile, extremely compact loading assembly
•Integral lift off prevention
•Allowance for angular mis-alignment
•5 year warranty
•Durable and chemical resistant polyurethane cable
•Load Cell Available Capacities 2.5 / 5 / 10 / 20 / 30 Tons
This folded bending beam load cell is manufactured from high quality tool steel, and fully sealed to IP67. Although normally utilised in tension, given the suitable adaptors and the appropriate application, it is possible to use the cell in compression or even in a bi-directional manner. The cell is typically used in tank and vessel weighing, bag filling machines, concrete batching equipment and conveyors.
Features
• Tension Type (S-Type) Load Cell
• Model T65
• Make Thames Side Sensors – UK
• High quality steel load sensor
• Fully potted & sealed to IP67
• Corrosion resistant
• Simple low cost installation
• Industry standard configuration
• 3 year warranty
• Suitable for use in tension, compression or bi-directional manner
• Optional proof tested eyebolts or rod end bearings
• Capacity Available 50/ 100 / 200 / 300 / 500 / 1000 / 2000 / 3000
The T68 stainless steel S-type tension load cell is ideal for ‘commercial’ weighing, due to its approval to OIML R60 3000 divisions (C3). Its fully welded and hermetically sealed construction ensures total environmental protection to IP68 / IP69K, coupled with excellent long term signal stability and performance.
Features
Additionally, it is supplied with a high durability polyurethane cable and the option of rod end bearings, making it the ideal S-type load cell. The T68 load cell is available with optional ATEX certification for all Gas and Dust zones. The ATEX certification for dust zones 20, 21 and 22 does not require safety barriers, which saves substantial cost. An optional high temperature variant for continuous operation in environments up to 150 ˚C is also available. For applications in aggressive environments where stress corrosion or acid attack is a potential problem, a special Parylene coating can be specified as an option.
• Stainless steel load sensor
• 2 mV/V rationalised output
• Fully welded and hermetically sealed to IP68 / IP69K
• 5 year warranty
• Suitable for use in tension, compression or a bi-directional manner
• Optional rod end bearings available
• Excellent long term stability
• Approved to 3000 divisions (C3) OIML R60 Class C
• High durability Polyurethane cable
• Optional Atex / EX and high temperature versions
• Capacity Available 250 / 500 / 1000 / 2000 / 5000 / 7500
T61 (3 MV/V OUT PUT)
This folded bending beam load cell is manufactured from high quality tool steel, and fully sealed to IP67. Although normally utilised in tension, given the suitable adaptors and the appropriate application, it is possible to use the cell in compression or even in a bi-directional manner. The cell is typically used in tank and vessel weighing, bag filling machines, concrete batching equipment and conveyors.
Features
•High quality steel load sensor
•Fully potted & sealed to IP67
•Corrosion resistant
•Simple low cost installation
•Industry standard configuration
•3 year warranty
•Suitable for use in tension, compression or bi-directional manner
•Optional proof tested eyebolts or rod end bearings
•Capacity Available 50/ 100 / 250 / 500 / 1000
This folded bending beam load cell is manufactured from high quality tool steel, and fully sealed to IP67. Although normally utilised in tension, given the suitable adaptors and the appropriate application, it is possible to use the cell in compression or even in a bi-directional manner. The cell is typically used in tank and vessel weighing, bag filling machines, concrete batching equipment and conveyors.
Features
•High quality steel load sensor
•Fully potted & sealed to IP67
•Corrosion resistant
•Simple low cost installation
•Industry standard configuration
•3 year warranty
•Suitable for use in tension, compression or bi-directional manner
•Optional proof tested eyebolts or rod end bearings
•Capacity Available 50/ 100 / 150 / 200 / 300 / 500 / 750 / 1000 / 1500 / 2000 / 3000 / 5000 / 6000
This suits to truck, track, tank and hopper weighing. This cell is designed to withstand rigorous shock loads prevailing in heavy duty weighments.
Features
•Material Stainless Steel
•Out Wire 4 or 6 Wires
•Sensitivity 2.00+/-0.005
•Cable Length 6 m, 12 m
These load cell mounts are suitable for weighing platforms, bag fillers, belt weighers and tank weighing in the Food Processing, Chemical, Pharmaceutical and general Bulk Handling industries.
Features
The fully welded stainless steel T85 load cells used in this mounting assembly are hermetically sealed to meet IP68 and IP69K and can be used in the harsh industrial environments.
Available with intrinsically safe ATEX certification for use in both gas and dust zones. Certification for use in zones 20,21 and 22 without safety barriers is also available. For applications in aggressive environments where stress corrosion or acid attack is an issue, a special parylene coating can be specified as an option, as can custom cable lengths for volume OEM customers.
This double bending beam single point load cell is manufactured from high quality alloy steel and nickel plated. Its design allows for high accuracy weigh measurement with off-center loads and it’s potted and sealed to IP66. Typical applications include: single point platforms up to 500x500mm in size, small buckets and hoppers supported by a single load cell, small bagging and dosing machines, filling scales and check weighers.
Features
• Nickel plated alloy steel load sensor
• Potted and silicone sealed to IP66
• 3000 divisions OIML R60 Class C
• 5 year warranty
• 500 x 500mm max. platform size (with load cell placed centrally under platform)
• High durability PU cable
• Capacity Available 15 / 20 / 30 / 50 / 100 / 150
These load cell mounts are suitable for weighing platforms, bag fillers, belt weighers and tank weighing in the Food Processing, Chemical, Pharmaceutical and general Bulk Handling industries.
Features
The fully welded stainless steel T85 load cells used in this mounting assembly are hermetically sealed to meet IP68 and IP69K and can be used in the harsh industrial environments.
Available with intrinsically safe ATEX certification for use in both gas and dust zones. Certification for use in zones 20,21 and 22 without safety barriers is also available. For applications in aggressive environments where stress corrosion or acid attack is an issue, a special parylene coating can be specified as an option, as can custom cable lengths for volume OEM customers.
The T16 load cell is specifically designed as a reliable, simple, low cost solution for dynamic weighing allowing faster setting time, higher weighing speeds and increased load cell life.For wash down applications a special venting kit, supplied with the unit, can be fitted which ensures IP68 protection levels. A stainless steel cover is also fitted to protect the weighing head. Particularly suited to high speed check-weighing applications and form, fill, seal machinery. Suitable for weighing platforms up to 500 x 500mm.
Features
• Double bending beam load cell
• 316 stainless steel housing
• Viscous damping especially for use in dynamic applications
• IP68 protection using supplied venting kit
• 4000 division OIML R60 class C accuracy
• Integral single point load cell allows off-centre loading
• Integrated on-centre overload protection
• Dual stopper for bi-directional overload protection
• 2 year warranty
• Durable and chemical resistant polyurethane cable
• Available Capacity 5 / 7.5 / 10 / 15 / 20 / 35
Looking for a smarter alternative to buying brand new weighing equipment? Refurbished Ishida Scales deliver cost-effective, eco-friendly, and reliable performance with quick availability. Professionally reconditioned to factory standards, they help reduce waste, cut costs, and ensure consistent accuracy for your production needs.