View allAll Photos Tagged verify

I've taken a couple steps to try and verify if this was actually my car featured in this article. No concrete answers yet, but at least I've ruled out one alternative.

 

I managed to contact the author of the magazine article, but (not surprisingly) he doesn't know which exact car he borrowed for the article. All he remembers is that it was loaned to him by Superformance Canada.

 

I also contacted the only other SPF owner I know of who had a similar car in Canada at the time of the article (same colour and specs, etc.), but he confirmed that his car was NOT used for this article.

 

Another cosmetic clue that this could be my car: round tail lamps (an option vs rectangular tail lamps).

After working on the first film done 3 days before in Lyon, district of La Part-Dieu, France, I returned there with the same equipment to extend a bit the series with ten new views. Then, I went by walk to the park "Tête d'Or" which not far away, and I did the rest of the film at Botanical Garden.

 

My Nikon F4 was loaded with an Iford HP5+ 36-exposure film. The film cartridge is DX-coded and I did not modify the nominal DX-coded 400 ISO sensitivity.

The AF Nikkor lens 1:2 f=35mm was equipped for the whole session with an Hoya HMC UV 52mm screw-on protective filter. A rectangular Minolta shade hood D54KC designed for the MC-Rokkor 1:2.8 f=35mm lens was used for the whole session. The light metering was done through the lens (TTL) either in the matrix or the spot metering of the Nikon F4 used in the "A" aperture-priority auto mode or the manual mode. The weather was covered with mist and still a bit cold (±0°C outside).

 

Fill-in flash using the Nikon SB-26 flashlight the TTL mode

 

Serre aux Camélias, January 17, 2024

Botanical Garden

Parc de la Tête d'Or

69006 Lyon

France

 

I used my Nikon SB-26 flashlight when indicated. After completion the film was rewound and processed using 350 mL of Adox Adonal (Agfa Rodinal) developer prepared at the dilution 1+25 for 6min at 20°C.

 

Digitizing was made using a Sony A7 camera (ILCE-7, 24MP) held on a Minolta Auto Bellows with the Minolta slide duplication accessory and Minolta Macro Bellow lens 1:3.5 f=50mm. The light source was a LED panel CineStill Cine-lite.

 

The RAW files obtained were inverted within the latest version available of Adobe Lightroom Classic (version 14.1.1) and edited to the final jpeg pictures without intermediate file. They are presented either as printer files with a frame or the full size JPEG's together with some documentary smartphone color pictures.

 

--------------

 

About the camera :

 

Maybe it would have been better not to ask for this question: « what’s new do you have at the moment?» to my local photo store, because Christine grab underneath the counter, stating « I have that … » . What a beast ! A Nikon F4 in the exact state of the Nikon brochure year 1990, presented with the standard AF Nikkor 1:1.4 f=50mm. I was already hooked by the machine. After two days, I decided to buy it even with some little common issues found on early Nikon F4 (see below), fortunately not affecting the whole, numberous functions of this incredibly complex professional SLR of the year 1990’s.

 

Nikon F4 came to the market on September 1988 starting with the serial number 2.000.000. Fully manufactured in Japan (modules came from 3 different Nikon factories) the F4's were assembled in Mito, Ibaraki (North to Tokyo) Nikon plant (no more in the mother factory of Tokyo Oi like the Nikon’s F). When I lived in Tokyo in 1990-1991, Nikon F4 was the top-of-the-line of Nikon SLR camera’s. I saw it in particular in Shinjuku Bic Camera store when I bought there, in December 1990 my Nikonos V.

 

Nikon F4 incorporates many astonishing engineering features as the double vertical-travel curtain shutter capable of the 1/8000s. Compared to the Nikon F3, the F4 was an AF SLR operated by a CCD sensor (200 photo sites). The film is automatically loaded, advanced with to top speed of 5,7 frame/s !! With the MB-21 power grip (F4s version). The F4 is a very heavy camera (1.7kg with the AF Nikkor 1.4/50mm), incredibly tough and well constructed. This exemplary is devoid of any scratches or marks, and in a condition proving that it was not used for hard professional appliances, for those it was however intended. The camera has still it original Nikon neck strap, the original user manual in French. The lens is protected by a Cokin (Franc) Skylight 1A 52mm filter and the original Nikon front cap. The two small LCD displays (one on the F4 body, one in the DP-20 finder) are both affected by the classical syndrome of « bleeding ». Fortunately, all information could still be read. One says that 70% of the early Nikon F4 suffer from this problem but also found on other models.

 

According its serial number and the production rate of about 5000 units/month, this Nikon F4s was probably manufactured in Mito, Ibaraki, Japan in May 1989.

The camera was exported abroad thereafter attested by the presence of the golden oval little sticker("Passed" on the DP-20 viewfinder. In order to certify the quality production, two Japanese organizations, the Japan Camera Industry Institute (JCII) and the Japan Machinery Design Center (JMDC), joined forces to verify and mark the conformity of products for the foreign market. This is how, between the 1950s and 1980s, this famous little gold sticker was affixed, with the legendary "Passed", meaning that the device had been checked. Finally, when we say that the device had been checked, the production line had been checked because each device could not be checked individually.

 

____________

 

About the lens:

 

The AF-Nikkor 1:2 f=35mm lens is part of the kit around my Nikon F4 year 1989. The kit now includes 3 very classical AF-Nikkor lenses of the same period of the Nikon F4 camera body, including the standard 1.4/50mm, the 1.8/85mm and the 2/35mm. The choice of fixed-focal lenses instead of zooms was already in 1989 a bit old-fashioned. However many photographers preferred still the homogenous rendering of a photo series done with a single focal lens. Generally speaking, a 35mm focal is a charming moderate wide-angle, very easy to use and particularly adapted for architectural and street-photography.

 

The AF-Nikkor 1:2 f=35mm is not a rare lens. However, when looked on eBay there was not tens of them available in EU. I bought a good one form a Belgian seller at a normal price (180€). The lens is in very good mechanical and optical condition and came with the rear and front caps. I sourced the dedicated Nikon HN-3 shade hood separately for 10€ .

 

____________

 

About the flash :

 

I received from a German seller for 50€ this Nikon Speedlight electronic flash SB-26 that was, at the time of Nikon F4, the most powerful dedicated Nikon flash (Guide Number 36 at full power and 100 ISO).

 

The SB-26 communicates with the Nikon F4 body (and many other Nikon camera's) and can be operated in many different modes including TTL real-time metering with automatic equilibration of the ambient light using the 5-zone matrix metering done by the DP-20 photometric viewer as well in the center-weighted mode. Other possibilities include the normal TTL mode, an Auto mode using the own sensor of the flash and a manual mode with 7 power levels.

 

The flash head can cover the optical field from super-wide angle lenses 18-20mm, wide-angle lenses 28mm and 35mm, normal lenses 50mm, and long-focal lenses at 70mm and 85mm. The head can be rotated according two axis for indirect lightening. In addition, the SB-26 has a special focusing aid for the Nikon F4 autofocus system, projecting in the the darkness a red focusing image. SB-23 flash can be also used as master or slave flash in a coordinated flash system.

 

The flash requires 4 AA alkaline cells for approximately 100 lights at full power and much more with energy recycling at lower power levels.

 

Friday's verification is a simple matter of confirming the number of ballot papers in each ballot box. the papers are counted face down, so only the ballot number is visible ... behind the tables are the staff enployed by the Electoral Office to count. In front of the tables are the political party agents trying to tally, and the occasional election observer too.

 

(Permission was sought to take photos that wouldn't identify ballots.)

 

More details over at alaninbelfast.blogspot.com/2009/06/verification-demystifi...

Differences between my circuit and the schematic. Resistor values only.

This layout is workable with the standard BOM on mfos. Just two breaks on the copper need not be drilled, one extra wire, and it will be as designed per drawing.

For the #MacroMondays theme for 2/12, we have been tasked with presenting anachronisms- old fashioned artifacts.

LBTH Mayoral Election Count - 4May18

Vérifier www.veterinaireonline.com/french/index.html Pour les urgences veterinaire pour Versoix et environs. Appelez le 022-755-5533.

A joint mission by SSPDF/SSOA/SPLA-IO/UNICEF and UNMISS are prepating to travel to Bentiu, for a 7 day mission to verify the presence of child soldiers in cantonment sites and armed groups. The will work together for the verification, and if any child soldiers are found, according to a senior SSPDF army officers, the children will be removed from the armed groups and will be registered.

I've seen enough doctored, damaged, and "fakified" butt stocks for Garands, and the scams always center around increasing value.

 

Worse still, vintage cartouched stocks are useless to me in my recreation and work. No point dragging a loosey-goosey butt stock to the range, one whose value will be attacked by tightening bedding or obscuring markings.

 

So I want to be rid of this crap, for purposes of replacing it with something I can use.

 

The Springfield GAW (ca.1944) has the look and feel of the real thing, unfooled with.

 

The "GHD" is a Winchester-marked piece, and the pistol grip shape seems weird to me. Still, it's not a terrible hunk of wood, and has what seems to be a WW2 SA butt plate and ferrule, swivel, and screws are intact.

 

Anyway, I'll be damned if I'll waste a lot of time research these, or especially, de-staining the "GAW", when it has no functionality for me. Fortuitously, I have some flawless wood that I can bed to perform suitably, so I'll just dispose of these to someone who wants them.

 

These are copyrighted photos, all rights reserved.

How to verify the authenticity and integrity of a downloaded file on Linux

 

If you would like to use this photo, be sure to place a proper attribution linking to xmodulo.com

Seminar on New Approaches to Nuclear Verification and Nuclear Security, held at the Agency headquarters in Vienna, Austria. Boardroom C, IAEA. 26 February 2003.

 

Photo Credit: Dean Calma / IAEA

  

Co-Sponsors:

United Nations Institute for Disarmament Research

 

Agency for the Prohibition of Nuclear Weapons in Latin America and the Caribbean (OPANAL)

 

Carnegie Endowment for International Peace

 

PIR Centre (Moscow)

 

Monterey Institute Center for Nonproliferation Studies

 

Nuclear Material Control Centre (Japan)

 

Verification Leclerc Fief RoseVerification Leclerc Fief Rose

Verify out these metal components china images:

Steven F. Udvar-Hazy Center: South hangar panorama, like Vought OS2U-three Kingfisher seaplane & B-29 Enola Gay, among other folks

 

Image by Chris Devers

Quoting Smithsonian National Air and Space Museum | Vought OS2U-3 Kingfisher:

The...

 

Read more about Cool Metal Components China pictures

(Source from Chinese Rapid Prototyping Blog)

Xavier is my brother-in-law, back in France. He works glass, which he brings back from Murano, close to Venice, Italy. He had a little workshop in the tiny appartment where he lived with my sister, Gaelle. They now live in an architect-built house still close to Brest, France.

PLEASE DO NOT COMMENT OR FAVE THIS PHOTOGRAPH. IT IS FOR SIZE VERIFICATION ONLY.

  

Verifying trigonometric identities Today we will learn how to verifying trigonometric identities in Differential Calculus. Here are some quantities that we will verify so we will go straight to the examples Prove the given identity given as (cotx/cosecx )*secx= 1?Solution(cotx/cosecx )*secx= 1.

 

LBTH Mayoral Election Count - 4May18

There has been a rise in sexual harassment claims and every organization has a responsibility to follow the best practices when hiring new employees. This is where the National Sex Offender Public Website (NSOPW) comes to the rescue. It allows employers to search for convicted offenders in tribal areas, territories, and every state.

Visit us

A joint mission by SSPDF/SSOA/SPLA-IO/UNICEF and UNMISS are prepating to travel to Bentiu, for a 7 day mission to verify the presence of child soldiers in cantonment sites and armed groups. The will work together for the verification, and if any child soldiers are found, according to a senior SSPDF army officers, the children will be removed from the armed groups and will be registered.

How To Get Match Masters Free Coin and Spins Codes

Match Masters Coin and Spins Gift Card Hack Generator

 

Click Here >> newgamecode.page.link/matchmasters

 

Click Here >> newgamecode.page.link/matchmasters

 

Match Masters Free Coin and Spins Generator Human Verification Or Survey

How To Get Match Masters Free Coin and Spins Generator

Dr. Tom Coon, director of Michigan State University Extension, talks to Jody Pollok-Newsom, host of the Michigan Farm and Garden Show during a celebration of the 1,000th MAEAP verification held at the Lee Sesquicentennial Farm in Laingsburg on Monday, October 17, 2011.

Collaborating with the new Disarmament Demobilization and Reintegration Commission formed by the transitional government of national unity, United Nations Mission in South Sudan led the joint organization of the workshop with United Nations International Children’s Emergency Fund, South Sudan People’s Defense Force and Sudan People Liberation Army in Opposition including Other Armed Alliances.The workshop brought together 50 participants from SSPDF, Pro-Machar SPLA-IO, South Sudan Opposition Alliance (SSOA), and the National DDR Commission.

  

Verification of clearance of route leading into Rubkona airstrip extension near Bentiu, by UNMAS and contractor TDI. The extension came as an UNMISS directive, with the goal of allowing for greater capacity and heavier payloads in aircraft providing Mission and Humanitarian support and supplies. UNMAS was requested to ensure clearance of the area (verify it clear of UXO and other ERW and explosive materials) prior to the commencement of engineering work.

 

Demarcating the area after clearance.

this illusionist did something that i haven't really seen... he let the audience come on stage and get a closer look... and still he was able to pull off this illusion... amazing.

Lynked.World is a platform built upon Blockchain Technology to verify digital identity, education and professional experience.

Employment Background Screening, Public Record, Integrity due diligence, pre-employment screening, risk consulting, corporate advisory, brand protection & IP infringement, process server, documents serving, medical testing, verification, driving licence, islamabad, pakistan

 

Melissa provides identity intelligence in 60+ countries around the world using a single interface. Melissa eIDV is a a real-time service that cleans, verifies, standardizes, and completes names, phone numbers, addresses, and emails. www.melissa.com/identity-verification

Dr. Tom Coon, director of Michigan State University Extension, talks to Jody Pollok-Newsom, host of the Michigan Farm and Garden Show during a celebration of the 1,000th MAEAP verification held at the Lee Sesquicentennial Farm in Laingsburg on Monday, October 17, 2011.

1 2 ••• 25 26 28 30 31 ••• 79 80