HALO DIORAMA BELIEVE
View allAll Photos Tagged unsc
most of these guys have been modded, they all can hold their weapons correctly now, added a couple new character heads to diverisfy them a bit, used Buck and Forge's heads, also repainted their weird looking white boots,
still despite all the work that needed to be done, they're still my favorite reach figures, we'll have to see what the series 3 trooper 2 pack holds, hopefully they'll fix their arms and make their desert uniforms.
Finally I finished my SHIP, I would like to say thank you for everybody who gave me suggestions and tips, especially my friend and master of Lego Space Nick Trotta!!
Thanks all!
Helmet isn't perfect but does the job .
What would you like to see me do next? For an uppcoming moc.
C&C wanted.
Captured at FlashPoint Photography Studio.
Planet REACH
Reach was colonized by humans in the 23rd century and became a significant military and industrial hub for the United Nations Space Command (UNSC). Reach played a crucial role during the Human-Covenant War, acting as a frontline defense against the Covenant forces. In 2552, Reach was attacked by the Covenant, leading to its eventual fall and significant loss of life, including many Spartans. The events on Reach had a profound impact on the UNSC. The Fall of Reach influenced the shape and course of the war against the Covenant.
Source: Yahoo AI.
Biosuit/hardsuit.
"Nicknamed "Big Easy", the United Nations Space Command Master of All Trades power-suit is the workhorse of the mechanized corps., packing a huge punch on the battlefield. Designed for land and outer-space operations mainly, the EZ-467 brings down the hammer on Covenant foes big and small. During the sieges on the Covenant world known as Pegasi Delta, it would prove powerful against infantry and vehicles alike. It's weakness would be sought out to be urban combat unfortuantly. This loss in design would ultimatley be it's undoing."
Hey, I'm 13, I can still qualify as a Halo kiddie :)
Hey guys! Here's a preview of my new Mongoose! Its based on the Halo 3 variant. The design is based on the structural foundation by SaberScorpion. I think his mongoose is the most well-built to date since it's both sturdy and can turn. As with all my UNSC builds, I've added the new olive green color to make it as accurate as possible. Instructions are coming soon!
this is my newest box set, very badass, must have if mega blok or halo enthusiest X) I got two, (so I could talk myself into opening one, maybe, obviously I did) :)) The figures span from the beginning of Halo to now from 2001 to 2011, and everything is amazing, down to the smallest details on the guns. peace
The UNSC Pelican is one of my favorite dropships from any sci-fi. I tried to mix the Halo: Reach and the Halo 2: Anniversary Pelican (Which looks stunning).
This thing has been on my bucket list for a while. Last year I bought some sand green parts to update another model (Photos of that to come later), and I ended up making a wing with some of the extra pieces. A few orders and after moving, I finally finished this thing.
I do wish I had spent more time on the coloring. In person this looks great, but in photos it does Come across a bit bland.
thii is the inside, one magnetic dude, and two spare seperate sets of armor. So freakin cool. And it goes great with the other five ;) But I still need more!!!!!!!
After 3 hours of editing, voila :)
Please fav! :D
Also, my ebay items have 1 day left, please check it out!
myworld.ebay.ca/thebrickbear/?_trksid=p4340.l2559
So what do you think? Looks like something LEGO would make:) Especially looking at the simplicity >:D
Master Chief and the crew of the UNSC Infinity are forced to flee from Earth to avoid capture by the super-advanced, Indomitable, artificial Intelligence Contana and her powerful Guardians.
The UNSC Infinity is an experimental Infinity-class supercarrier and the largest, most advanced vessel in the United Nations Space Command (UNSC) Navy in the Halo universe. Originally a secret project using reverse-engineered Forerunner and human-adapted Covenant technology for potential use during the Human-Covenant War, its construction was completed after the war's conclusion. The Infinity served as a multi-role vessel for science, exploration, diplomacy, and as a training and flagship for a Spartan-IV military force
At last, my only MOC of the summer is complete. Of course you can't blame me: I've been in and out the whole summer with brickworld, camp, wyoming, new jersey, and up next is maine. But finally, using the time in between, I finished my largest Halo vehicle. And I am also proud to say that this is the only fully minifig scale pelican in existence at 26 inches long. The only real problem is that the wings are so heavy that they keep falling off without stands placed beneath them, but I'll fix that later. But, if they WERE fixed properly, than they could rotate, as the back engine flaps do. The passenger bay, like the actual pelican, can hole ten sitting passengers and five standing, in addition to the two pilots and whoever might be in the engineering station. The rear hatch does open and close, and the top can detach in order to access the interior.
ALSO, if anyone noticed there are two lengths of 2x2 round bricks on the bottom of the pelican. I'm interested to see how many people can guess how I made them, and how I attached them to the pelican.
After the UNSC frigate one I wanted to build another one so I decided to build this one!
note this thing is pretty big so it would not fit into the paper! any way hope you enjoy!
At last, my only MOC of the summer is complete. Of course you can't blame me: I've been in and out the whole summer with brickworld, camp, wyoming, new jersey, and up next is maine. But finally, using the time in between, I finished my largest Halo vehicle. And I am also proud to say that this is the only fully minifig scale pelican in existence at 26 inches long. The only real problem is that the wings are so heavy that they keep falling off without stands placed beneath them, but I'll fix that later. But, if they WERE fixed properly, than they could rotate, as the back engine flaps do. The passenger bay, like the actual pelican, can hole ten sitting passengers and five standing, in addition to the two pilots and whoever might be in the engineering station. The rear hatch does open and close, and the top can detach in order to access the interior.
ALSO, if anyone noticed there are two lengths of 2x2 round bricks on the bottom of the pelican. I'm interested to see how many people can guess how I made them, and how I attached them to the pelican.
From the comics "Another War" (Marvano/Haldeman).
The build is over 160 studs long. Took a good 25 days in a long period of more than 2 years, started in september 20.
After three weeks of nothing, I give you the first WIP of the assault carrier that actually shows progress on the exterior. It wasn't easy (curves are hard), but it's comin' along quite nicely :)
HALO: "Can any of you see me?"
Jerry: "AAHHH!! WHO ARE YOU? WHAT ARE YOU DOING IN MY APARTMENT!?"
Kramer: "Jerry, calm down! This is the HALO UNSC Spartan III with cloaking ability."
Jerry: "KRAMER! Why is every weird thing connected to you, and why is it always in my apartment!?"
...laughter...
George: "That's a really cool suit of combat armor. Is that... available?"
HALO: "Not to civilians. You can see me??"
George: "Well, yeah. I mean, you're transparent, but... not really."
HALO: "Why do you want a suit that makes you invisible??"
George: "... ... No reason."
...laughter...
HALO: "Aw, man! I was just on the Bijou Planks and they said the same thing. How'm I gonna be effective if I'm visible??"*
Kramer: "Alright, calm down. I know a guy who knows a guy."
...laughter...
Jerry: "This is too much! Kramer! HALO guy! Out! Go to Kramer's apartment."
Kramer: "Yeah, yeah, let's go. I'll make some calls.
HALO: "Thanks, Kramer!"
George: "I'm coming too."
...laughter...
...applause...
⋅•⋅⋅•⋅⋅•⋅⊰⋅•⋅⋅•⋅⋅•⋅⋅•⋅⋅•⋅⋅•⋅⋅•⋅⋅•⋅⋅•⋅⋅•⋅⋅•⋅∙∘☽༓☾∘∙•⋅⋅•⋅⋅•⋅⋅•⋅⋅•⋅⋅•⋅⋅•⋅⋅•⋅⋅⋅•⋅⋅⊰⋅•⋅⋅•⋅⋅•⋅⋅•⋅
A year of the shows and performers of the Bijou Planks Theater.
Mega Construx
HALO Spartan III
Customizer Pack
2017, Mattel
Funko
Mini Moments
Seinfeld - Jerry's Apartment
Jerry
George
Kramer
Elaine
* As seen yesterday!
Sorry that it's taking so long, but part of it is waiting for BL orders. So far, all I can really say is that at least my head fits inside of it. It also looks pretty good so far. Well, almost done with part one of sixteen of my costume!
So, I said I wasn't going to be building much.
it looks like I lied.
I realized when staring at my abysmally messy desk, that the They Dreamed it, you build it category of the AMBC fit the Falcon quite perfectly.
So Two days, many headaches, and way too many redesigns later, I've got a UNSC Falcon.
Capable of fitting a pilot at the controls, and five full figures in the troop compartment, all while still being pretty sturdy!
Oh, and I edged the official model up a bit by adding a WWII-esque pair of teeth on the cockpit.
After three weeks of nothing, I give you the first WIP of the assault carrier that actually shows progress on the exterior. It wasn't easy (curves are hard), but it's comin' along quite nicely :)
After finishing the warthog and while working on the Pelican, I figured I had to make a scorpion in sand green to complete the set.
While googling pictures for the scorpion, I came across the concept art for the HW2 scorpion. While the HW2 scorpion turret is different from the typical scorpion design, I really liked how it appeared more like a modern tank turret.
The Marines and ODSTs for our BrickCon collaboration. Eclipse Graphix will provide special legs for the Marines and ODSTs as well as some faces for the Marines (which I don't have at the moment.) If anyone can make Marines to the standards shown here (with the helmets) and mail them to us for use at the Con we will be happy to send them back with a thank you gift. FM me if you are interested. I can also trade for or buy the helmets.
"Death... from NOWHERE! Are you afraid? Heh heh."
What?
Is that your name? Death From Nowhere?
"NO! I am a UNSC HALO Spartan III. But you can't see me!"
He thinks he's John Cena.
We can see you!
"I... really? That's impossible. I have my cloaking on! I'm invisible!"
I mean, you're transparent but, very visible.
Even if you were invisible, you're holding a gun! That's not transparent at all.
"Ah! Right. I'll toss the gun."
That won't help!
Is this what your show is about? That you are invisible? When you're not.
Instead of 'Death From Nowhere' how about the 'Performance That Goes Nowhere.'
"Now, listen! I-"
NEXT!!
⋅•⋅⋅•⋅⋅•⋅⊰⋅•⋅⋅•⋅⋅•⋅⋅•⋅⋅•⋅⋅•⋅⋅•⋅⋅•⋅⋅•⋅⋅•⋅⋅•⋅∙∘☽༓☾∘∙•⋅⋅•⋅⋅•⋅⋅•⋅⋅•⋅⋅•⋅⋅•⋅⋅•⋅⋅⋅•⋅⋅⊰⋅•⋅⋅•⋅⋅•⋅⋅•⋅
A year of the shows and performers of the Bijou Planks Theater.
Mega Construx
HALO Spartan III
Customizer Pack
2017, Mattel
This is my version of an ODST Bullfrog. As with most of my builds, I didn't go for strict accuracy, but rather made some design choices based on what I thought would look good. The focal point for this guy (and what makes him a Bullfrog!) is the new jetpack from Brick Affliction. That is shown in the next couple photos.
Always loved the look of the Warthog designed by Nick Brick. Finally got around to making it and figured I'd post a picture of it alongside my Scorpion
My version of Halo's own epic Scorpion tank. I tried to squeeze in as much detail as I could but still retain functionality, so the turret rotates and the gun rotates in it's socket. Naturally the treads feature independent suspension, and also I added the disk that's underneath the turret, but what's cool is that it actually extends into the base so that even if you rotate the turret up it still wont come completely out. One more thing you may notice is it's a-symmetry, and I don't mean as in the little details, but in the general shape. Here's is what I learned from my pictures, which were all of the Halo 3 scorpion: on the left side of the tank, the sides are more sharply angled, and when it widens in the back in sharply angles out, while on the right side, the side in front is completely flat, and when it widens, it does so progressively and almost curves.
Based almost entirely off of the UNSC Falcon designed by Lego Junkie . Despite not being entirely accurate, his variation of the Falcon is one of my favorites. Lots of reverse engineering and guess work later, I present to you my version of his Falcon. I did change some things, and I can almost guarantee the internal constructions are designed wayyy differently. I hope to one day make a Falcon that is 100% my design, but I must admit I did enjoy building this and even learned a few new things along the way.
Master Chief Petty Officer John-117 is a SPARTAN-II commando of the UNSC Naval Special Warfare Command
--
I needed to support my Brother Iain's Bricks of Character at Brickcon, and with Halo 5 coming out soon, I thought it was time Spartan 117 was built.
My version of the UNSC's hornet, and I am extremally pleased with the results. I don't know why, but everytime I look at it I just feel all good and fuzzy inside.
Measuring in at 140 studs (again!) this destroyer kicks Elite and Jackal Ass while flying at ridiculous speeds across space.
This is my SHIPtember build (Yay first SHIPtember) . I hope you guys enjoy my 6 days of effort. While there were cooler concept Ships I could have emulated, I chose this one because it has stripes and its Halo, cause Halo kicks ass
Here is the concept art This is based off kwibl.deviantart.com/art/UNSC-Thanatos-destroyer-317191926 A careful eye may notice that The top ass engines are missing. That it not because I didn't build them, but because they were just too damn heavy (along with more wing detail. It was either those two things or stripes, and I like stripes.
20 years after the battle of Installation 04B, the battle between the UNSC and the Covenant still rages, even into the deep depths of space on the recently discovered Halo ring.
After seven months, it's finally finished! More pics and video later.
Also, Happy Valentines Day! <3
My version of the UNSC's hornet, and I am extremally pleased with the results. I don't know why, but everytime I look at it I just feel all good and fuzzy inside.
I know it doesn't look like I've made much progress for having an entire free day to do it, but it's been a very frustrating build experience. I actually built those segments that loop under the armpits, only to find that I didn't make the loop exaggerated enough, and whenever I rested my arms by my sides, they broke under the pressure. Also, things just started to fall apart in general, such as a the entire bottom of the backpack, and the joints between the front and back of the suit also started cracking, so I had to resort to some extreme measures that I am ashamed of: I used glue, LOTS of glue, and so far it's worked pretty well. But I guess I can't do a good balance of aesthetics and durability. Well, you should DEFINiTELY expect this to be done by tomorrow. I swear.
My version of the UNSC's hornet, and I am extremally pleased with the results. I don't know why, but everytime I look at it I just feel all good and fuzzy inside.
My version of the UNSC's hornet, and I am extremally pleased with the results. I don't know why, but everytime I look at it I just feel all good and fuzzy inside.
Well, it's taken me a month, but here it is. Surprisingly the hardest part was that loop thing under the armpits, because they kept breaking off. But after a lot of glue and ingenuitive thinking, I managed to make it work, but now it requires and extra person to help get it on. Expect more pictures of me wearing it tomorrow. I'm 1/3 of the way there.
Well, it's taken me a month, but here it is. Surprisingly the hardest part was that loop thing under the armpits, because they kept breaking off. But after a lot of glue and ingenuitive thinking, I managed to make it work, but now it requires and extra person to help get it on. Expect more pictures of me wearing it tomorrow. I'm 1/3 of the way there.
I just had to :3
in the end, I had to sacrifice my mini-Frigate and Destroyer, That robot with the cape that I posted earlier this month, plus my entry into the Halo design your own set contest.
Oh yeah, I'm not planning on entering this into the contest...
Plus, I had to show you people how it's done
Personally, I love the Machine gun :3
Oh yeah, Nick, I totally stole your idea for the rocket pod design >.>
Well, it's taken me a month, but here it is. Surprisingly the hardest part was that loop thing under the armpits, because they kept breaking off. But after a lot of glue and ingenuitive thinking, I managed to make it work, but now it requires and extra person to help get it on. Expect more pictures of me wearing it tomorrow. I'm 1/3 of the way there.