View allAll Photos Tagged surface
If you lack the expertise for advanced surface modeling( www.cadcam.org/cad-cam-services-for-best-catia-surface-mo... )in-house or don’t have the necessary skills to take your concepts to the next level, then use CAD/CAM services for CATIA surface modeling as they can quickly and accurately evolve your ideas into designs that are manufactural and meet the highest standards.
Coluber constrictor will often commandeer rodent burrows, where they will lay their eggs. These nests may be under boards and other objects with notable surface area. This nest was found under a large metal trash lid along the edge of a field.
One of two maritime structures built by the North Western Railway at Morecambe, Stone Jetty is today an integral part of the local coastal protection works. The single storey building on the end of the jetty was an early railway station.
Stone Jetty can be found on Morecambe's Promenade, opposite the later Midland Hotel, and was originally built for the 'Little' North Western Railway Company as a wharf and rail terminal for both passenger and cargo transport. Richard Smallman (1816-1873) was the railway's engineer from April 1851 to March 1858.
An earlier wooden pier, also constructed by the railway company, once stood just east of Stone Jetty. Both had rail lines on them. The wooden pier dated from 1850 was was constructed under the railway's then engineer, John Watson. It has since been demolished.
The wall of Stone Jetty are vertical and constructed of closely-fitting sandstone blocks. The walls reach 10m above the sand at the seaward end. The overall length of the jetty is 250m. Its average width along the neck is 25m and at the head, 40m, where there is a small lighthouse of similar stone construction, and the former station, now a tearoom.
Chambers were incorporated into the body of the jetty to enable it to be used for loading and unloading at various states of the tide — which at Morecambe has a high range of over 10m, with the possibility of extreme storm surges of 2-3m.
A stretch of the western face of the jetty, some 180m long, is protected by rock armour. This was replenished after storm damage in 1988. During the late 1990s, the surface of the deck was re-laid in patterned coloured concrete and new seating, lamp standards and railings installed.
research: PHEW, with thanks to Reg Bond
www.engineering-timelines.com/scripts/engineeringItem.asp...
archival inkjet print 73"X35" edition of 5 + 2 AP
The digital landscapes in "Surface.Tension." series are attempts to explore conventions of representation. Specifically, they deal with the idea of "sublime" and its relation to the landscape, which quickly developed into a formalized way of composing a canvas and a formalized way of reading a composition. The overwhelming amount of data flowing through various digital networks (pointed to in this context by commercial advertisements) constitutes a new type of "sublime" experience. It is a dimension that is entirely human-made and it is pushing against a shell of any metaphor that we try encapsulate it in.
Kingkonree Solid Surface/Stone Resin Products
KKR is fast becoming one of China's leading solid surface stone baths & luxury bathrooms exporters, as we are focusing on high-class stone freestanding baths & basins since 2000. Our factory has an advanced 30,000 square meter production facility with an annual capacity, employing more than 100 skilled workers and technicians, 50 sales&after-sales teams, and quality control management teams.
One of KKR's greatest strengths and benefits offered to our clients is the ability to work hand in hand to develop unique OEM designs and exclusive product ranges, to suit your freestanding bath or luxury bathroom needs. Quality Assurance and Quality Control programs are incorporated into every stage of our manufacturing and production.
All stone resin products carry a 10 years consumer guarantee. All clients, from consumers, architects, designers, or developers are guaranteed to receive the finest products, services, and backup facilities. The average working experience with stone resin products is more than 15 years and all surface solid products are exported globally with stable quality
Solid Surface Products Types for Sale
What Is Solid Surface?
Solid surface products are one of the most popular stone resin materials in sanitary ware. Why? They are so many advantages. Here are some key points to share with you.
Scratch Resistant
Seamless Appearance
Anti-fungal
Stain Resistant
Variety
Less Maintenance
How is Solid Surface Made?
A solid surface is a synthetic stone resin material consisting of hydrate alumina, acrylic, epoxy, or polyester resin, and pigments. The material of the solid surface was cured and heated to 60°C or more. The cured stone resin material is cut into sheets or mold and polished on one or both sides according to the brand used. Sometimes the material was heated to 160°C and cooled to improve its heat resistance.
Huizhou KKR Stone is a leadingsolid surface manufacturer in China for years, specializing in designing and supplying solid surface basins, bathtubs, shower trays, stools and shelf accessories for bathroom solutions. Covering an area of 19000 square meters, KKR has over 100 molds for bathtubs, and 500 molds for basins; The company and factory have over130 skillful workers with their own professional R and D team, we can customize your solid surface products from concept to reality. The factory is also equipped with a full set of environmental protection facilities and advanced machines, to make sure the goods are in good fatness, accurate size, fine smooth surface, well polished, stable color, safe to our health with no pungent smell.
How is Solid Surface Made?
We persist in the pursuit of new technology and nice quality, from raw material to finished items, we have a well-trained QC team to ensure the quality by full inspection and quality certificates. We also have attended domestic and overseas exhibitions with rich experience, including new coming online Canton fair, Alibaba stream live show. Details bring quality, KKR is positioning to middle high-end market, and we have exported to over 107 countries from all over the world. We are full of experience in 5-star hotels and other big projects. Sincerely welcome all potential clients around the world to visit us and set up a long-term and win-win business relationship between both sides. Keep moving, making better.
Solid Surface Application
Different solid surface types are available to be applied in different places with various functions. KKR solid surface products are available to be used in wash basins, bathtubs, shower trays, wall shelves vanity mirrors, and so on.
Solid surfaces whose prices compete with natural stone or quartz surfaces. It is able to be in multiple colors and patterns. The material can be shaped and polished, which makes it attractive to both commercial and industrial designers. KKR has the skills and knowledge required to provide solutions for surface solid products and excellent customer service to satisfy different requirements.
Solid Surface Application
Solid Surface Vs Quartz Vs Granite
For many homeowners, solid surface, quartz and granite is able to offer a look and feel they prefer compared to the more natural options. They own some common features, but also have many differences as follows.
Solid Surface Vs Quartz Vs Granite
Appearance
Solid surface products are with a matte-like look, while quartz has a lustrous, deep, three-dimensional look, and granite is with a lustrous, rich, and crystalline appearance.
Visibility of Seams
Solid surface with stone resin material has the least visible seams of all products because seaming caulk is perfectly keyed to the solid surface material. But the seams of quartz and granite are visible although a good installer can hide them well.
Cost and Expense
The solid surface products own the most cost-effective expense compared to the other two products.
Solid Surface Video
How To Clean Solid Surface?
Care & Cleaning Of Solid Surface Products Step 1
Step 1
Common dirt and residues: Please use soapy water or a scouring pad mixing with water or detergent to clean the bathtub, washing basin/sink, especial bathroom basin, kitchen sink, kitchen countertop, etc.
Care & Cleaning Of Solid Surface Products Step 2
Step 2
Watermark: Please wipe the bathtub with a soft and dry cloth, and keep it dry while not using it.
Please don't use something is hard to clean solid surface bath tub and other solid surface product, (such as shower tray, bath tub, basin, sink, bathroom solid surface stools, shower wall panel, etc), to avoid scratching it.
Care & Cleaning Of Solid Surface Products KKR advantages
KKR advantage
No only long warranty in 10 years of our solid surface sanitaryware product, kitchen countertop, table, reception, etc. Also we will provide you some files, such as maintenance, installation file and video, etc.
Custom Solid Surface Products Service
Every one of our stone basins, bathroom suites, and countertop is manufactured using a blend of pure white aluminum minerals and various other compounds infused with high-performance resins. Each item is then individually hand-finished by our craftsmen to give it that perfect finish.
This is one of my favorite shots from a recent trip to the beach in South Carolina. I'm not sure if the swimmer is really surfacing (as it appears) or just getting smacked by a wave, but it turned out really well with the forground splash and the focused action at the crest of the wave.
The desk surface was stripped and sanded. The black edge panels were removed, sanded, and spray-painted black. The paper guard was removed and sanded to remove cuts. All wood surfaces received several coats of varnish before the entire thing was reassembled.
At deaths door with man flu .. I managed a brief but freezing visit to a couple of favourite spots in the wind this morning
PCA 141 - Metallic Surfaces
Date: Jan. 23 - Feb. 6, 2011
Image Tag: pca 141
Assignment:
One of the tougher lighting challenges in photography is dealing with shiny metallic surfaces. The reflective properties of polished metal can play tricks with exposure and make for challenging compositions. There should be many items around the house to use for subjects (cutlery, chromed items, jewelry, etc.). This assignment is based on a chapter in an often-recommended book titled Light-Science & Magic: An Introduction to Photographic Lighting.
WIT: I found this assignment to be a challenge. Took about 40 shots using various settings. Used white foam cork board as well as several white poster boards to surround the grater in order to keep colors from being reflected in the grater. The dark area at the top of the grater may be a reflection of the camera, but I am not sure. Could not eliminate it. Used two clamp lights with reflectors for the lighting. So, I am submitting this image - against my better judgment - as I'm not sure it was successful. Not sure whether the goal was to avoid a bright reflection coming off the object??
Metering: Matrix
Shutter: 1/320
Aperature: F2.8
Exp. Comp. +1.0
Lens: 50mm
ISO: 400
WB: Incadescent
Tripod
UV filter removed
No polarizer
Este estilo de piercing é chamado surface, o local foi escolha de uma cliente, a partir da escolha do local foi realizado um estudo no corpo para saber se o tipo de pele dela serviria o tipo de material a ser utilizado, no caso PTFE também conhecido como bioplastico que é um material maleavel desenvolvido para este tipo de aplicação. e esse é o resultado
This photograph was taken during a photography trip to Guadalupe Island in Mexico. Guadalupe Island is a white shark hot spot and in my opinion the number 1 location for observing/ photographing great white shark behavior. The gin like water is so clear that it allowed me to experiment with photographing underwater using only natural light. These photos were taken using a combination of surface and submersible cages that were lowered to 10 meters.
via Outdoor Surface Painting outdoorsurfacepainting.tumblr.com/post/155941971426
Just Pinned to Cycle Lane Line Marking: Cycle Lane Line Markings...
via Outdoor Surface Painting outdoorsurfacepainting.tumblr.com/post/144713216436
Just Pinned to Anti Slip Step Paint: Playground Coloured...
via Outdoor Surface Painting outdoorsurfacepainting.tumblr.com/post/149795596506
Just Pinned to Cycle Lane Line Marking: Floor Marking in...
via Outdoor Surface Painting outdoorsurfacepainting.tumblr.com/post/148507181496
Just Pinned to Anti Slip Step Paint: Car Park Marking in New...
via Outdoor Surface Painting outdoorsurfacepainting.tumblr.com/post/155474420556
Just Pinned to Tennis Court Markings: Cycle Lane Colour Painting...
SPEEDSHOP.CH
Lancia Delta H-Beam "short series" connecting rods custom made for bespoke SSR Pistons with standart compression height. Military spec Aircraft Quality Double Re-Melt
E4340AQ Chromoly Steel 300M Specifications. Not Forged, Fully Machined Billet, Triple Tempered
Surface Peened, Through Hardened , Cryogenically Treated, Balanced +/- 1.0 Gram
ARP Fasteners 2000 Standart and 625 Aged Custom. AMPCO 45™ Bushings. Magnaflux Inspected and Rockwell Tested.
Bielle ad H-Rovesciata per Lancia Delta Integrale: Serie lunga dedicate a pistone SSR con altezza compressione ridotta. Accaio fusione secondo specifica AM (aeronautica militare USA) doppia fusione, E4340AQ CrMo accaio 300M, pezzo ricavato interamente dal pieno. Triple Temperatura. Pallinature superficiale, Trattamento "Cryocenico" con N20. Bilanciati in +/-1g.
ARP bulloneria 2000 Standart e 625 Aged Custom. AMPCO 45™ cuscinetti. Ispezione Magnaflux strutturale e durezza Rockwell.
H-Profil Pleuel für Lancia Delta Integrale. Lange Serie für SSR Schmiedekolben mit reduzierter Kompressionshähe. Stahl gemäss AM Spezifikation (US Luftfahrt Militärspezifikation) doppeltes Schmelzverfahren E4340AQ CrMo Stahl entspricht 300M Spezifikation. Aus dem vollen gefräst. Triple Temperierung. Oberfläche kugelgestrahlt, Kryogenische Behandlung mit N20. Austariert in +/-1g. ARP Verschraubung 2000 Standart und 625 Aged Custom. AMPCO 45™ Bolzenlager. Magnaflux Inspektion der Struktur und Rockwell Härtetest.
The kit and its assembly:
This fictional high-altitude Hawker Tempest variant was inspired by leftover wing tip extensions from an AZ Models Spitfire kit. I remembered that the late Spitfire variants had a modified wing shape, much like the Tempest’s oval shape, and from this the idea to transplant these tips was born.
The rest of the modifications of the Matchbox kit at the core of the build were logical steps - and I must say that the Matchbox Tempest is not a bad kit. It goes together really well, and while the recessed surface details are somewhat soft, the overall impression is good to me.
For a high-altitude variant I added a leftover five blade propeller from a Pioneer 2 Hawker Sea Fury that was modified with a styrene tube adapter to match the OOB MK. II’s Centaurus engine. A radiator from a Macchi C.205V was added for the intercooler, and a small compressor’s air intake was added in front of the cockpit. The bulges for the compressors and their respective plumbings in front of the cockpit are curved pieces of sprue material - simple, but effective.
Under the wings the post-war attachment points for missile launch rails were PSRed away and the pitot, originally an L-shaped device under the left wing, was relocated to the leading edge – similar to the tropicalized export Tempests. The slipper tanks come from a Hobby Boss MiG-15, but they had to be PSRed to match the Tempest’s very different wing shape. I found that they’d look more elegant than the original drop tanks.
Inside of the cockpit I added a dashboard and a small gunsight behind the windscreen (the canopy had been cut into two pieces for open display) , scratched from styrene sheet – I could not live with the void in front of the pilot, and anything is probably better than nothing in this case, since the Matchbox kit only offers a seat (and a pilot figure, though), but no dashboard, floor or side panels. The kit comes, however, with nice oxygen flasks behind the seat. Weird.