View allAll Photos Tagged multimode
Siemon LC buffered connectors have been qualified for use in Siemon’s industrial fiber system. Use these
connectors to terminate 62.5/125 or 50/125 micron multimode or singlemode fiber and plug into the rear of the
Industrial LC outlet.
LC simplex connector, multimode, buffered fiber beige boot
Electronic musicians "The Muzzle" and Members of "Caused by the Sun"
myspace.com/themuzzle
myspace.com/causedbythesun
st to st custom red fiber optic cable Ethernet patch cord available in single-mode 9/125 and multi-mode 62.5/125
Automatic Tool Start & adjustable suction with tool triggered or manual on-off switch and infinitely variable suction force, can be used wet or dry.
www.unitekfiber.com/fiber-optic/breakout-indoor-fiber-opt...
Description of breakout fiber optic cable
Breakout fiber optic cable also can be called as distribution fiber optical cable is designed for Indoor uses. There are two types of breakout fiber cables. One is inside with 2.0/3.0mm tight buffered cables. The fiber glass cores of this cable structure commonly can reach 48 cores. The other is inside with 0.9mm tight buffered around with Kevlar yarn as strengthen support.
The cable fiber cores is 4-144 cores. The outer jacket for both type of cable is LSZH or PVC. The tensile strength for former type of fiber cable is much higher. Breakout cable is usually assembled with terminations to be a breakout or fan-out pigtails or path cords.
The distribution bundled pigtail fiber, also known as the tail fiber bundle, has a connector at one end and a broken end of the fiber cable at the other end. It is connected to the core of other fiber optic cables by splicing, and is often installed to connect terminal equipment in the ODF frame box, fiber terminal box. The pigtails are divided into multi-mode pigtails and single-mode pigtails. The multimode pigtail is orange with a wavelength of 850 nm and a transmission distance of 500 m for short-distance interconnection. The single-mode pigtail is yellow with two wavelengths, 1310nm and 1550nm, and the transmission distance is 10km and 40km respectively.
www.unitekfiber.com/fiber-optic/breakout-indoor-fiber-opt...
SC duplex connectors have a duplexing clip, which allows each connector to be removed individually. In the event fiber polarity is reversed during termination, there’s no need to discard the connector. Simply remove connectors from the clip and switch to correct the mistake, saving valuable installation time and money. The duplexing clip also speeds troubleshooting. In the event there’s a fault with a single connection, an individual connector can be removed from the clip and re-terminated without disturbing the adjacent connector.
SC connectors employ an outer housing that is color-coded in accordance with TIA/EIA-568-B.3 and ISO/IEC 11801 Ed. 2.0 requirements (beige for multimode and blue for singlemode).
Electronic musicians "The Muzzle" and Members of "Caused by the Sun"
myspace.com/themuzzle
myspace.com/causedbythesun
Good old phone ("RCA") sockets have replaced the accursed DIN sockets!
I'm not terribly keen on using a standard 1/8" jack plug to provide power though ...
Electronic musicians "The Muzzle" and Members of "Caused by the Sun"
myspace.com/themuzzle
myspace.com/causedbythesun
Electronic musicians "The Muzzle" and Members of "Caused by the Sun"
myspace.com/themuzzle
myspace.com/causedbythesun
Electronic musicians "The Muzzle" and Members of "Caused by the Sun"
myspace.com/themuzzle
myspace.com/causedbythesun
dashboards D-Star: xlx.davidcappello.com and YSFReflector: ysf.davidcappello.com Tri-Mode standalone reflector - Transcoding done on the "A" module D-Star, YSF and DMR
How to connect with DMR: docs.google.com/document/d/12kFbnPe4XwVI16Qr6QeSahHY1bfKG...
Part of the network core. This looks like a Cisco 5500 with multimode (10 or 100Mbps) fiber that runs to other buildings.
This sander gives you everything Rotex has to offer in a smaller, lighter package. The RO 125 puts 500 watts of power, dual-mode sanding, and triple-function performance into a comfortable, 4.4 pounds. This 5" sander does it all—coarse and fine sanding, and polishing. It is perfect for woodworkers, painters, solid surface fabricators, and anyone who needs to tackle a range of sanding tasks over the course of a day. The RO 125 incorporates near-total dust extraction, exceptional ergonomics, and many advanced features. This is a small sander that is perfect for big jobs.
Golden 1 Center, future home of the Sacramento Kings franchise of the National Basketball Association, promises to be one of the most technologically advanced arenas in the world. It is already setting records as the world’s first installation of wideband multimode fiber (WBMMF), a capacity-boosting network technology supplied by CommScope.
CommScope, along with our partners Avago Technologies and Ixia, came together at Datacenter Dynamics Converged in San Francisco to demonstrate something special. We demonstrated an error-free 40 Gigabit Ethernet (GbE) transmission over one kilometer of laser-optimized multimode fiber.
Electronic musicians "The Muzzle" and Members of "Caused by the Sun"
myspace.com/themuzzle
myspace.com/causedbythesun
The ST connector employs a rugged metal bayonet coupling ring with radial ramps which facilitate engagement to the studs of the mating adapter
HMS provides joint interoperable connectivity to the tactical edge and to the most disadvantaged warfighter with an on-the-move, at-the-halt and stationary line-of-sight and beyond-line-of-sight capability for both dismounted personnel and platforms. The radios are scalable and compliant with modular software communications architecture, enable net-centric operations, operate multiband and multimode, and deliver reliable, secure tactical communications.
Read more at asc.army.mil/web/portfolio-item/c3t-handheld-manpack-and-....
Electronic musicians "The Muzzle" and Members of "Caused by the Sun"
myspace.com/themuzzle
myspace.com/causedbythesun
Electronic musicians "The Muzzle" and Members of "Caused by the Sun"
myspace.com/themuzzle
myspace.com/causedbythesun
The Joint Air-to-Ground Missile (JAGM) System provides an improved air-to-ground missile capability for rotary wing aircraft and unmanned aerial systems. The JAGM is an aviation-launched, precision-guided munition for use against high-value stationary, moving and relocatable land and naval targets. JAGM utilizes a multimode seeker to provide precision point and fire-and-forget targeting day or night in adverse weather, battlefield obscured conditions, and against a variety of countermeasures. A multipurpose warhead provides lethal effects against a range of target types, from armored vehicles, thin-skinned vehicles and maritime patrol craft to urban structures and field fortifications. JAGM delivers the joint services a single air-to-ground missile with improved lethality, operational flexibility and a reduced logistics footprint.
Read more at asc.army.mil/web/portfolio-item/ms-jagm/.
lc to st custom red fiber optic cable Ethernet patch cord available in single-mode 9/125 and multi-mode 62.5/125
Electronic musicians "The Muzzle" and Members of "Caused by the Sun"
myspace.com/themuzzle
myspace.com/causedbythesun
Electronic musicians "The Muzzle" and Members of "Caused by the Sun"
myspace.com/themuzzle
myspace.com/causedbythesun
Electronic musicians "The Muzzle" and Members of "Caused by the Sun"
myspace.com/themuzzle
myspace.com/causedbythesun
Electronic musicians "The Muzzle" and Members of "Caused by the Sun"
myspace.com/themuzzle
myspace.com/causedbythesun
CommScope, along with our partners Avago Technologies and Ixia, came together at Datacenter Dynamics Converged in San Francisco to demonstrate something special. We demonstrated an error-free 40 Gigabit Ethernet (GbE) transmission over one kilometer of laser-optimized multimode fiber.
Electronic musicians "The Muzzle" and Members of "Caused by the Sun"
myspace.com/themuzzle
myspace.com/causedbythesun
Building on the electromechanical innards of the 1980 Nikon EM, the FG was playing 'catch-up' with the Canon AE-1 that was introduced in 1976.
This 1982 camera was Nikon's first multimode AE camera. It is almost identical in size to the EM and was a hit with the popular market. It didn't sell the 5,000,000 copies that the 1978 AE-1 Canon did, but it did very well.
Sadly, the rush to incorporate a fully electronically controlled shutter & devising integrated circuits to implement it, have caused reliability issues with some models.
The rush to modern cameras can be traced to this era in SLR development. The small cameras led the charge in the popular mind.
lc to st custom white fiber optic cable Ethernet patch cord available in single-mode 9/125 and multi-mode 62.5/125
Siemon MAX fiber adapter modules are compatible with all MAX series faceplates, modular furniture adapters, surface mount boxes and patch panels. All fiber adapters are “universal” to support either multimode or singlemode fiber connections.
Angled module with 1 simplex ST adapter (1 fiber)
Siemon MAX fiber adapter modules are compatible with all MAX series faceplates, modular furniture adapters, surface mount boxes and patch panels. All fiber adapters are
“universal” to support either multimode or singlemode fiber connections.
Angled module with 1 duplex SC adapter (2 fibers)
Sierra Component
Your IT Store
HP ProCurve Gigabit-LX-LC Mini-GBIC (J4859C)
ProCurve Gigabit-LX-LC Mini-GBIC is a small form factor pluggable (SFP) gigabit LX transceiver that provides a full-duplex gigabit solution up to 10 km (single mode) or 550 m (multimode).
Product Name ProCurve Gigabit LX-LC Mini-GBIC
Product Type SFP (mini-GBIC)
Application/Usage Data Networking
sierracomponent.com/product/hp-procurve-gigabit-lx-lc-min...
fc to st custom purple fiber optic cable Ethernet patch cord available in single-mode 9/125 and multi-mode 62.5/125
Products
Optical Switch is an ideal component for OADM, OXC, system monitoring and protection. With the compact package, fiber optical switches can be easily integrated into a high density optical communication system.
Designed by professional engineers, MEISU's fiber optic cable/network connect switches can provide a wide range of channels, including 1×2, 2x2, 1×3, 1×4, 1×8, 1×12, and etc. With the features of low loss and compact sizes, the single mode and multimode fiber optic switches produced by MEISU can all be well integrated into optical network for switching optical transmission paths or monitoring a large-scale optical transmission. As a mature fiber optic switches manufacturer, MEISU aims to develop the smallest yet the most reliable industrial fiber optic switches of different package forms. Our goal is to make every customer find the right switching solution for their specific needs.
Fiber Optical Switch
Magneto Optical Switch
Magneto-optic switch has been widely used due to its capabilities of handling large beam cross-sections, operating at low voltages and low insertion los. The Mageto-optical switch is realized by connecting or blocking the optical signal, it has non-mechanical configurations and activated via an electrical control signal, it also has build-in circulator and isolator functions, making it very popular in aerospace and military equipment.
MEMS Switch
MEISU MEMS optical switch is based on micro-electro-mechanical system (MEMS) technology, which achieved low insertion loss and highly repeatability by rotating the mirror of MEMS chip. Its compact size makes it flexible to be used in channel Blocking, instrumentation and fiber sensing system.
Mechanical Optical Switch
Mechanical Optical Switch is realized by moving optical elements to change the optical path, different from traditional T-shape switch, MEISU's I-shape optical optical switch takes up smaller space and makes it easier to be integrated into the optical communication system.
Micro Optical Switch
MEISU micro optical switch is the upgraded version of the regular mechanical optical switch with an even smaller package size (L)20×(W)10.5×(H)8.0mm.
High Power Optical Switch
High power opitcal switch can be used in medical equipments, such as laser beauty equipment, laser surgery which usually require higher optical power and more frequent interruption of the laser output, besides, it can also be used in Industrial laser system.
Variable Time-Delay Module
The optical time-delay module consists of several optical fibers of different lengths as delay lines, selecting different paths by optical switches can achieve different delays. Optical delay lines are widely used in radar technology, all-optical signal processing, optical communication and other fields.
Fiber Optical Switch Features
An optical ethernet/network switch is a key device in an all-optical network. Normally, it can be widely used in optical network protection, optical signal multiplexing/de-multiplexing, optical cross-connection (OXC), system monitoring & protection and testing etc. Therefore, with the multi-functions held by the fiber optic managed switch, the fiber optical switch has now gradually become the basic element of information exchange in optical networks.
As a professional fiber optic switch manufacturer, MEISU produces various types of optic switches with multiple channels (1×2, 2x2, 1×3, 1×4, 1×8, 1×12 etc). All featured with the characteristics of low loss and compact sizes, MEISU's fiber optical switches can be easily integrated into a high-density optical communication system for switching optical transmission paths or monitoring a large-scale optical transmission.
Aiming to develop the smallest yet the most reliable fiber optical switches of different package forms, MEISU wants to help every customer to find the right switching solution for their specific needs. For instance, if someone is looking for more compact fiber switches, the "I" shaped mechanical optical switch is more compact than the common "T" shaped ones; Several optic switches can also be combined to form optical line protection module and Variable Time-Delay module；The newly developed magneto optical switch holds the advantages of fast switching speed and low driving voltage, so it is now generally considered as the leading fiber optical switch in the near future.
Fiber Optical Switch FAQs
What is the maximum number of channel the MEMS switch can achieve？
16.
What is the highest power the high power switch can stand?
3W.
Besides the size, is there any difference between mini mechanical switch and regular one?
Besides the size, is there any difference between mini mechanical switch and regular one?
Mini switch has shorter switching time 4ms and only 8 pins; regular switch has switching time 8ms and 10 pins.
SMS303's Ultra Rare Dutch
Tidal Quad Modular Filter
Only 15-20 are build
The Tidal Quad is a 4-channel filterbank with extensive control and modulation possibilities. The filter can be used in High-/ Low-/ or Bandpass with an Envelope follower for each mode. There is also an LFO for each set of 2 Channels which allows complex modulations. Additionally it offers a Waveshaper for each channel. For friends of analog distortion this unit leaves no wish open.
* 4x HP/BP/LP - Filtermodule
* LFO Channel 1+2 (Cutoff)
* LFO Channel 3+4 (Cutoff)
* LFO each channel positive or negative switch
* 1 Waveshaper per Channel
* 4x Sidechain Input with Envelope Follower for Cutoff-Modulation
The resonant filter might be the most important effect in popular music these days. However if you want to insert a filter on multiple channels of your mixer and also would like to have a lot of knobs and modulation possibilities, there was no real solution. That's why Tidal Music Electronics announces it's four channel desktop multimode filter. You can switch the four individual resonant filters between Lowpass, Bandpass and Highpass modus. Each filter can be modulated by an envelope follower, a LFO and an external CV. The envelope follower is specially designed to track percussive sounds without false triggering, a key feature when used with drumcomputers, grooveboxes or guitar.
Maximum Modulation:
Each filterbank has 4 VCFs, 4 Waveshapers, 4 Envelopefollowers and 2 Low Frequency Oscillators (LFOs). The filters are switchable between 3 modes, Lowpass, Bandpass and Highpass. The Low- and Bandpass are 24 dB and the Highpass is 12 dB/Oct. The cutoff of each channel can be modulated by it's own Envelope follower which can be fed by a sidechain input or by the audiosignal itself. This option gives you the possibilities to create very funky filter-effects. Each LFO modulates 2 channels and every channel has it's own depth controller which can be set positive or negative. This can be used to generate cool stereo effects.
The Waveshaper
The waveshaper is one of the components which give the filterbank it's unique sound. It actually is a wavefolder which "folds" the tops of the waveform back instead of clipping. This sounds a bit like an overdrive but also has some characteristics of Frequency Modulation.
To give you a better idea what the waveshaper actually does we'll illustrate what happens with a simple sine wave using different ratio settings for each of the two shaper modes.
fc to lc custom purple fiber optic cable Ethernet patch cord available in single-mode 9/125 and multi-mode 62.5/125
The SENKO LC Unibody is fully compatible with the original LC family of singlemode and multimode connectors, adapters and associated components, manufactured under a worldwide license from OFS Fitel. The Unibody features a compact, pull-proof design with RJ-45 style interface, and features a one-piece molded housing with internal strength member, for significantly improved 90º side-pull performance under Telcordia GR-326-CORE testing. It is manufactured using a ruggedized material that results in a latch trigger up to four times stronger than average.
For more information www.senko.com
Dassault Rafale
THALES
DAMOCLES POD
The Thales Damocles is a multimode, multifunction targeting pod. It was developed for use by the Mirage 2000 and Rafale multirole fighters.
The CT fiber coupler line consists of MT-RJ, LC, SC, ST and SC/ST hybrid adapters available in 2 and 4 fiber versions. Angled versions are available with our patented gravityfeed design for controlling the bend radius of fiber cables at the work area. All fiber adapters are “universal” to support either multimode or singlemode fiber connections.
Flat coupler with 2 duplex LC adapters (4 fibers)
Siemon MAX fiber adapter modules are compatible with all MAX series faceplates, modular furniture adapters, surface mount boxes and patch panels. All fiber adapters are “universal” to support either multimode or singlemode fiber connections.
Flat module with 1 simplex ST adapter (1 fiber)
CommScope, along with our partners Avago Technologies and Ixia, came together at Datacenter Dynamics Converged in San Francisco to demonstrate something special. We demonstrated an error-free 40 Gigabit Ethernet (GbE) transmission over one kilometer of laser-optimized multimode fiber.