View allAll Photos Tagged mockba
Moscow, Russia: Fountain Druzhva Narodov in VDNKh Park with 16 females of the former Soviet Republics
at Moscow (Leningradsky railway terminal)
The trains were ordered to connect Moscow with Saint Petersburg and later Nizhny Novgorod at a speed of up to 250 km/h (155 mph). They are derived from the German ICE 3 train but with bodies widened by 330 mm.
from 2015 all the Sapsans were directed to Moscow – St Petersburg route
While many innocent Ukrainians loose their lives because against the facist russian regime, life seems to continue like normal in Russia. Although, more or less like normal. 6 times a week russian rail operator RZD runs a train between Moscow and their exclave Kaliningrad. Although these trains are seen as a domestic train, normal russians can't take it without a permit. Because the train crosses Lithuania between Belarus and Kaliningrad, and the russians see this country as the enemy. But then again, did they are treat the Lithuanian people as their friend and ally?
During a moderate winter's day, train 030Ч from Kaliningrad to Moscow ran quite a bit late. As the Lituanian railways are responsible for hauling this train within their own borders, one of their modern ER20 loco's was in front of the train. With about 13 hours delay ER20-004, one of their recently repainted loo's, ran the train from Kybertai to Kena.
Mockba = Moskva means Moscow
Manufactured by Krasnogorsky Mekhanichesky Zavod (KMZ) , Mechanical Factory of Krasnogorsk, Moscow, former USSR
Model: 1959, type 2b, produced between 1957-60 with quantity 216.457 units
All Moskva-5 produced between 1956-60
There are 2 types and 2 sub-types of the Moskva-5.
As to Alexander Komarov
Folder/Rangefinder medium format film camera
Film 120 roll; picture size dual format: 6x9 and 6x6 with a mask
Lens: Industar-24 (И-24) 110mm f/3.5 four elements in three groups, serial no.133211
Aperture: f/3.5 - f/32 setting: lever and scale on the lens
Focus range: 1.5-15m + inf
Focusing: by a thumb lever, fixed onto the lens-shutter barrel plate,rotates wedge-shaped prisms in its window, turning the knob to focus rotates the glass, thus adjusts the rangefinder images that must be matched,
the rangefinder window on the middle of the top plate sees this prisms apparatus window directly, (prisms assembly is rotatable 180 degrees to the right for the bellows closing)
with no mechanical linkage between the lens and the body
Focusing is possibleby directly rotating the front lens element also.
Shutter: leaf shutter Moment-24S (Mомент-24C), speeds 1-1/250 +B
setting ring and scale on the lens-shutter barrel
Cocking lever: on the lens-shutter barrel, not depends the winding
Shutter release: left side of the top plate, beside the winding knob,
releasing is also possible by a knob on the right front side of the struts
To fire the shutter, the film needs to be transported, if not, the release button will be blocked,
a double exposure locking mechanismindicated by a small window beside the winding knob, before winding it is white and the shutter release is blocked and after winding it is red and shutter release works
Winding knob: left side of the top plate
Viewfinder: coupled rangefinder and dual-format separate viewfinder for larger field of view, separate windows and eye-pieces
The two rangefinder windows are 6.5 cm apart (very long) for accurate focusing
Frame view changes according to the frame size adjustment lever that points the engravings, a square (6x6) and a rectangle (6x9), on the right of the top plate,
this thumb lever moves a sliding frame in the viewfinder
Memory dial: on the winding knob, you can set three film types, and with each film type, four film speeds : (in cyrilic) Tsvetnaya (colour film): 22, 32, 45, 65 GOST, Panchrom (b/w film): 32, 45, 65, 90, Izopanch (b/w film): 32, 45, 65, 90
Bellows opening button: on the right of the top plate; closing: simultaneously pressing to the two struts' back arms
Flash PC socket: X sync, on the shutter
Self timer: knob on top of the shutter
Back cover: removable, a lever in it for controlling 6x6 and 6x9 frame red window's lids, opens by a latch on the right side of the camera
Two red window on the back cover w/ built in lids, right lower side one is for 6x9
Engravings in the back cover: Сделано в СССР (Sdelano v SSSR =Made in USSR)
Engravings on the top plate: Mockba -5 (hand writing style), and
on the back of the top plate: KMZ logo and the serial number
Serial no. 59 22600 (the first two digit shows the production year)
Leather hand grip
Two tripod sockets, 3/8'', on the bottom plate and on the front cover
Body: made by injection molding, weight: 867g
Its main difference from Moskva-4 is added selftimer.
Earlier models of the Moskva were copies of the Zeiss Ikon Super Ikonta C. Unlike earlier models, this model is a Zeiss Super Ikonta adapted form, rather than a clone and unlike the Super Ikonta, its solid top plate has a built-in rangefinder and a dual-format viewfinder.
Moskva-5 is the latest model in a series of cameras Moskva brand. Main difference from Moskva-4 is added self timer.
The Moskva-5 was undoubtedly designed as an expensive professional camera, and not as an amateur model. It was built in an age (1956–1960) when 35mm photography was already suppressing 120-film, and only professionals still insisted on using the larger format. Its dual-format characteristics, rangefinder and excellent lens and finish indicate professional use also. Apparently these cameras were used until very late (the 1980's?) by Moscow street photographers. More info:
Nikon D800
Please do not use my photos without my explicit permission. All my photos are under full copyright
Here is the piece we did in moscow last week, never been to russia before, we had a real blast, nice people, beautiful architecture, and awesome food, we definitely look forward to come back there one day! We would like to thank all the faces and laces team, Oskes, Sugar, Zmogk, TRUBA and all the good people we met there.
Expo de Tranuf
du 28 Novembre 2009 au 10 Janvier 2010
Au Sputnik Bar
14 Rue de la Butte aux Cailles
Paris - 13eme