View allAll Photos Tagged microscale
LEGO catalog arrived in the mail; saw the back cover. Thought I'd try my hand at a microscale 10197 Fire Brigade.
I won't say I'd make sweet love to that set, but I will say I'd consider it.
Casa Blanca Lego Architecture Studio House with pastel coloured landscaping. • Casual photos for now - I plan to upload formal photos with a “proper” backdrop.
My microscale space freighter called "A Fleeting End to Melancholy", name inspired by the Ships of Iain M Banks' excellent Culture universe. Built as part of my history of shipping, "Lost in Transit", displayed at the 2018 Christchurch Brick Show.
Apologies for the low quality photo, will try and take a better quality one at some stage.
Built for the June Part Challenge at www.flickr.com/groups/part-challenge/.
The Keypart is: Technic, Pin with Friction Ridges Lengthwise WITH Center Slots.
An older MOC (was at Bricks Cascade in March), but finally took a picture of its final setup with all three characters and a tank.
It's time for another LEGO Microscale Habitat!
As suggested by one of my viewers, here's a mini LEGO Volcano.
I'm still thinking about using a lighter blue for the sky, but at the end I'm pretty happy on how it turned out.
Do you think the lava effect turned out well?
Check out the video tutorial on my YouTube channel:
VFG Dauntless cruiser refuelling at Vynax substation, Ullandae V (the "bubblegum planet"). Another 6x6 microscale sci-fi location.
When the war came to the Antarion IV, the factories became a significant target for heavy bombers of the enemy faction. As a result, each factory was upgraded to defend itself and ultimately the factories on Antarion IV became as heavily armed as the war machines they produced.
====================================================================
This microscale vignette was created for the Eurobricks Micro Sci-Fi contest.
Built for the tips and bricks mini contest. www.tipsandbricks.co.uk/post/2020-competition-miniaturize...
Inspired by the colonial viper from BSG. The 1 x 2 slope doesn't sit all the way down but does stay attached.
Designed a microscale Capitol Center building high-rise of the tallest office building in Columbia SC.
Combination of studs up and sideways building for the floorplates.
Instructions on Rebrickable: rebrickable.com/mocs/MOC-265268/Thomus_Bean/26-story-buil...
I walked by a mobile crane the other day and it reminded me how interesting they are. And once I had the crane sorted, of course it needed a construction site ...
For more photos, see the full set.
Here's my attempt at a microscale build of Red Spacecat's USS Saratoga Destroyer.
I didn't have enough bright green cheese, so olive green will have to do. Some details aren't quite right, but its challenging to condense a SHIP into 16 studs long.
This is sized to be compatible with Mobile Frame Zero: Intercept Orbit
A group of ships of the Mars Congressional Republic Navy, including one Donnager-Class battleship, two Scirocco-Class assault cruisers, and two (oversized) Corvette-Class light frigates
Choose your own way
Made for Lug'est labyrinth activity.
Entry is fixed by previous builder. The exit is my choice, let's climb to the top.
Built for the last round of the LCBTC! Mixed feelings about the results... it was a good deal more challenging than I anticipated, and the end result looks so small! I had planned on adding mountains and a brick-built sky in the background but too many of my rock bricks are tied up in another project right now.
.jpg/800x607.jpg){kind=link}
It's been awhile since I built a microscale spaceship. They're great for when you don't have a lot of time to build, but want to get something accomplished. They're also great for using small, but really cool looking pieces.
After 10+ months, I finally decided to give building this a shot, turns out I could build it(with some minor color changes and tweaks) adn the best part is that this one is freestanding, no tricks required!
This Megalith is in scale to the Monkeylord(yes it really that big) and features all the details as seen in the game. It can even 'Build' Bricks out of it's Butt.
At some point I'm going to recreate this picture.
After German Forces invaded the French Lunar Territories the Allied Armies declared war, with fighting soon spreading to the Red Planet, previously occupied by the Soviets.
The most common ship used by the Orris Collaborative; part gunship, part courier, part utility vessel. Tough and thick skinned, welcome ally in a dogfight.
I've been doing some design work in a sci-fi setting. When I got to designing starships, I couldn't help myself. There should be three more of these up in the next few days unless I decide to build a bunch more!
The Almen is a newer version (B variant) of the Adeiffen-Class Heavy Battlecruiser.
________________________________________________
Spaceship of the Adeiffen-Class Ultra-Heavy Battle Cruiser
Affiliation: Jixnor Democracy, Concero Republic
Manufacturer: Jixn Shipyard
Length/beam/draft: [scale???]
Armor/shield level: /Class 3
Sublight engines/lightspeed engines:
Sublight speed/lightspeed:
Range: 477 days or 210 days with two Marine Groups.
Crew: 675, plus 1,450 pilots and fighter craft service personal, plus two Marine Groups with 2,500 men each, or a total of 7,125 men.
Armament: 576x 1in laser cannons, 48x 3in laser cannons in double turrets, 24x 32in Hinton laser cannons, 4x burst laser cannons, and up to 1,000 fighter craft (200 are emergency defense fighters).
The Adeiffen-Class Ultra-Heavy Battle Cruiser is arguably the strongest warships in the galaxy and was the Concero Republics strongest vessel until the Tramendant-Class Battlecruiser. Its original design dates back to the First Piracy War when UPS forces (Union of Planetary States) called for a large battle cruiser capable of launching at least five-hundred fighter craft into battle. Jixn Shipyards jump at the chance to build such a ship. However, the Jixn Shipyard design was declined by UPS forces, and instead they went with the battle tested Tronde Shipyards new [name] battlecruiser. The Adeiffen design went into the “designers vault” and there it stayed for almost a century. During the Second Piracy War the Jixnor Democracy realized that it was lacking a true, modern battle cruiser capable of flagship status – so it called its most trusted shipwright, Jixn Shipyards, to manufacture a large battle cruiser. Jixn Shipyard struggled to find a design capable of accomplishing everything the Jixnor Democracy called for. After many agonizing weeks of failed designs and sleepless nights the Jixn Shipyard board of design, in desperation, began looking at all its failed and past designs in the “designers vault” and stumbled onto the plans of the Adeiffen-Class battle cruiser. Jixn Shipyard greatly changed the ships interior, but did little to the exterior except add four burst cannons and addition point defense systems. The century old Adeiffen was an amazingly modern design.
The Adeiffen-Class has the amazing capability to carry over one-thousand fighter craft and their pilots. This is all due to the Adeiffens large hanger bay that runs almost the entire length of the ship. This impressive amount of fighter craft gives the Adeiffen an enormous advantage over the conventional battle cruiser. But the large hanger bay and numerous fighters do come at a cost of decreased fire power and power in general, and more facilities are needed to house the pilots and service crews for the fighter craft. The large amount of fighter craft also call for a large control center to insure all one-thousand fighter craft are use efficiently and run smoothly. Thus the Adeiffen has a second bridge located toward the bow of the craft, right above the hanger bay doors. This second bridge is larger than the primary bridge and is used exclusively for fighter craft purposes.
Like all Jixnor warships the Adeiffen has exceptional maneuverability, a fast lightspeed engine and slow sublight speed. It does however, lack two of the key staples of many Jixnor warships, the ability fly in an atmosphere, and missile tubes. The Adeiffen was the most maneuverable battlecruiser until the America-Class Battlecruiser (which really was a mini-battlecruiser and not a true battlecruiser). The Adeiffen could run circles around older Trynin warships, and was more maneuverable than most Trynin frigates. One of the reasons for the Adeiffens exceptional maneuverability is due to its external engine braking systems which can redirect the ion thrust up to ninety degrees and with the help of magnetic thrust vectors it can redirect the ion thrust up to one-hundred thirty degrees. These thrust vectors allow the Adeiffen to have a high reverse speed.
The weapons aboard the Adeiffen are formidable to say the least. Twenty-four Hinton cannons all effectively positioned to provide an pure fire arc give the Adeiffen no blind spots to speak of – and as if that’s not enough the Adeiffen has over six-hundred point defense systems! The Adeiffen is also one of the first Concero Republic vessels that supports the new burst cannons without any modifications.
The Adeiffens two bow appendages house the battery banks, the communications array, numerous sensor arrays, and housing for up to two marine groups. The aft appendages house the engines, additional living quarters, and batter banks for the lightspeed engine. The appendages are vital to the survival of the vessel which makes them prime targets in battle; but they are more than adequately armored, and the Adeiffen can more than manage if one or even two are destroyed. Another amazing thing about the Adeiffen is that its appendages are easily interchangeable between ships. This allows heavily damaged Adieffen-Class vessels to be repaired rather than scrapped, it also allows for faster repair time. It does however allow for some colorful mismatches and since most Jixnor captains are zealous when it comes to their ships many Adeiffen-Class vessels, when idol, are in a shipyard getting a paint job done.
Approximately twenty Adeiffen-Class Ultra-Heavy Battlecruisers were built and only two were destroy (but not forgot for the two destroyed vessels were stripped of their appendages which serve aboard other Adeiffen-Class vessels). Only two subgroups were manufacture, the Adeiffen-Class Ultra-Heavy Battlecruiser which is the one being described, and the other the Amaffen-Class Ultra-Heavy Battlecruiser. Nineteen Adeiffen-Class cruisers and one Amaffen-Class cruiser were built. The Amaffen is a slightly larger version of the Adeiffen and feature over twelve-thousand fighter craft, a class four shield generator, and eight additional Hinton cannons; it also feature a more efficient power supply and an upgraded electronic systems. The Amaffen served as the Jixnor Democracy’s flagship during the entire Agronomic War but was replace by the Rander (a Tramendant-Class Battlecruiser) once the war ended. However, in the event the Rander is called upon by the Concero Republic, there is no doubt that the Amaffen will once again serve as the Jixnor Democracy’s flagship.
An Adeiffen-Class vessel has served in every single battle during the Agronomic War, including both Battles of Blandimen and the invasion of Est Fellen. It served the Concero Republic well during the Agronomic War and there is no doubt that it will continue to serve the Jixnor Democracy and its allies for years to come. The Jixnor Democracy is currently updating the current fleet of Adeiffen-Class vessels with new electronics and more efficient power supplies. There are even rumors that the Jixnor Democracy plans on increasing the Adeiffen fleet from eighteen vessels to forty-eight! The Adeiffen will no doubt be around long enough to squelch whatever adversary crosses the Jixnor Democracy!
My second foray into the Micropolis theme, this is a regional headquarters office building for everyone's favorite energy company - Octan.
The back of the building, with its recessed patios, was originally supposed to be the front.
I'm still feeling my way around how this theme works. I used to think it wasn't parts-intensive but I'm learning otherwise. ;)
Built for BrickFair NJ 2015 and rendered using Bluerender.
Yup another cargo ship. Who knew building these is so much fun? This one also features play features like opening hanger and a little ship that can move cargo.
A microscale version of my SHIP. This is what my SHIP would have looked like if
a) I hadn't lost interest
b) I had enough parts.
: /
Anyway, not a great picture or an incredible MOC, but considering it only took 1 and a half hours, I thought it was okay.
ALSO: I WON'T BE MAKING ANYTHING LARGE UNTIL AFTER AUGUST. I'M STARTING ON HOMEFRONT.
-IronBricks