View allAll Photos Tagged methodical
The water buffalo or domestic Asian water buffalo (Bubalus bubalis) is a large bovid originating in South Asia, Southeast Asia, and China. Today, it is also found in Europe, Australia, and some American countries. The wild water buffalo (Bubalus arnee) native to Southeast Asia is considered a different species, but most likely represents the ancestor of the domestic water buffalo.
Two extant types of water buffalo are recognized based on morphological and behavioural criteria – the river buffalo of South Asia and further west to the Balkans, Egypt, and Italy, and the swamp buffalo, found from Assam in the west through Southeast Asia to the Yangtze valley of China in the east. The origins of the domestic water buffalo types are debated, although results of a phylogenetic study indicate that the swamp type may have originated in China and was domesticated about 4,000 years ago, while the river type may have originated from India and was domesticated about 5,000 years ago. Water buffalo were traded from the Indus Valley Civilisation to Mesopotamia, in modern Iraq, 2500 BC by the Meluhhas. The seal of a scribe employed by an Akkadian king shows the sacrifice of water buffalo.
At least 130 million domestic water buffalo exist, and more human beings depend on them than on any other domestic animal. They are especially suitable for tilling rice fields, and their milk is richer in fat and protein than that of dairy cattle. The large feral population of northern Australia became established in the late 19th century, and smaller feral herds are in New Guinea, Tunisia, and northeastern Argentina. Feral herds are also present in New Britain, New Ireland, Irian Jaya, Papua New Guinea, Colombia, Guyana, Suriname, Brazil, and Uruguay.
CHARACTERISTICS
The skin of river buffalo is black, but some specimens may have dark, slate-coloured skin. Swamp buffalo have a grey skin at birth, but become slate blue later. Albinoids are present in some populations. River buffalo have comparatively longer faces, smaller girths, and bigger limbs than swamp buffalo. Their dorsal ridges extend further back and taper off more gradually. Their horns grow downward and backward, then curve upward in a spiral. Swamp buffalo are heavy-bodied and stockily built; the body is short and the belly large. The forehead is flat, the eyes prominent, the face short, and the muzzle wide. The neck is comparatively long, and the withers and croup are prominent. A dorsal ridge extends backward and ends abruptly just before the end of the chest. Their horns grow outward, and curve in a semicircle, but always remain more or less on the plane of the forehead. The tail is short, reaching only to the hocks. Height at withers is 129–133 cm for males, and 120–127 cm for females. They range in weight from 300–550 kg, but weights of over 1,000 kg have also been observed.
Tedong bonga is a black pied buffalo featuring a unique black and white colouration that is favoured by the Toraja of Sulawesi.
The swamp buffalo has 48 chromosomes; the river buffalo has 50 chromosomes. The two types do not readily interbreed, but fertile offspring can occur. Buffalo-cattle hybrids have not been observed to occur, and the embryos of such hybrids do not reach maturity in laboratory experiments.
The rumen of the water buffalo has important differences from that of other ruminants. It contains a larger population of bacteria, particularly the cellulolytic bacteria, lower protozoa, and higher fungi zoospores. In addition, higher rumen ammonia nitrogen (NH4-N) and higher pH have been found as compared to those in cattle
ECOLOGY AND BEHAVIOR
River buffalo prefer deep water. Swamp buffalo prefer to wallow in mudholes which they make with their horns. During wallowing, they acquire a thick coating of mud. Both are well adapted to a hot and humid climate with temperatures ranging from 0 °C in the winter to 30 °C and greater in the summer. Water availability is important in hot climates, since they need wallows, rivers, or splashing water to assist in thermoregulation. Some breeds are adapted to saline seaside shores and saline sandy terrain.
DIET
Water buffalo thrive on many aquatic plants and during floods, will graze submerged, raising their heads above the water and carrying quantities of edible plants. They eat reeds (quassab), a giant reed (birdi), a kind of bulrush (kaulan), water hyacinth, and marsh grasses. Some of these plants are of great value to local peoples. Others, such as water hyacinth, are a major problem in some tropical valleys, and water buffalo may help to keep waterways clear.
Green fodders are used widely for intensive milk production and for fattening. Many fodder crops are conserved as hay, chaffed, or pulped. Fodders include alfalfa, berseem and bancheri, the leaves, stems or trimmings of banana, cassava, fodder beet, halfa, ipil-ipil and kenaf, maize, oats, pandarus, peanut, sorghum, soybean, sugarcane, bagasse, and turnips. Citrus pulp and pineapple wastes have been fed safely to buffalo. In Egypt, whole sun-dried dates are fed to milk-buffalo up to 25% of the standard feed mixture.
REPRODUCTION
Swamp buffalo generally become reproductive at an older age than river breeds. Young males in Egypt, India, and Pakistan are first mated at about 3.0–3.5 years of age, but in Italy
they may be used as early as 2 years of age. Successful mating behaviour may continue until the animal is 12 years or even older. A good river male can impregnate 100 females in a year. A strong seasonal influence on mating occurs. Heat stress reduces libido
Although buffalo are polyoestrous, their reproductive efficiency shows wide variation throughout the year. Buffalo cows exhibit a distinct seasonal change in displaying oestrus, conception rate, and calving rate. The age at first oestrus of heifers varies between breeds from 13–33 months, but mating at the first oestrus is often infertile and usually deferred until they are 3 years old. Gestation lasts from 281–334 days, but most reports give a range between 300 and 320 days. Swamp buffalo carry their calves for one or two weeks longer than river buffalo. It is not rare to find buffalo that continue to work well at the age of 30, and instances of a working life of 40 years are recorded.
TAXONOMIC HISTORY
Carl Linnaeus first described the genus Bos and the water buffalo under the binomial Bubalis bubalus in 1758; the latter was known to occur in Asia and as a domestic form in Italy. Ellerman and Morrison-Scott treated the wild and domestic forms of the water buffalo as conspecifics whereas others treated them as different species. The nomenclatorial treatment of wild and domestic forms has been inconsistent and varies between authors and even within the works of single authors.
In March 2003, the International Commission on Zoological Nomenclature achieved consistency in the naming of wild and domestic water buffalo by ruling that the scientific name Bubalus arnee is valid for the wild form. B. bubalis continues to be valid for the domestic form and applies also to feral populations.
DOMESTICATION AND BREEDING
Water buffalo were domesticated in India about 5000 years ago, and in China about 4000 years ago. Two types are recognized, based on morphological and behavioural criteria – the river buffalo of the Indian subcontinent and further west to the Balkans and Italy, and the swamp buffalo, found from Assam in the west through Southeast Asia to the Yangtze valley of China in the east. The present-day river buffalo is the result of complex domestication processes involving more than one maternal lineage and a significant maternal gene flow from wild populations after the initial domestication events. Twenty-two breeds of the river type water buffalo are known, including Murrah, Nili-Ravi, Surti, Jafarabadi, Anatolian, Mediterranean, and Egyptian buffalo. China has a huge variety of buffalo genetic resources, comprising 16 local swamp buffalo breeds in various regions.
Results of mitochondrial DNA analyses indicate that the two types were domesticated independently. Sequencing of cytochrome b genes of Bubalus species implies that the domestic buffalo originated from at least two populations, and that the river and the swamp types have differentiated at the full species level. The genetic distance between the two types is so large that a divergence time of about 1.7 million years has been suggested. The swamp type was noticed to have the closest relationship with the tamaraw.
DISTRIBUTION OF POPULATIONS
The water buffalo population in the world is about 172 million.
IN ASIA
More than 95.8% of the world population of water buffalo are found in Asia including both river and swamp types. The water buffalo population in India numbered over 97.9 million head in 2003, representing 56.5% of the world population. They are primarily of the river type, with 10 well-defined breeds comprising Badhawari, Murrah, Nili-Ravi, Jafarabadi, Marathwada, Mehsana, Nagpuri, Pandharpuri, Toda, and Surti. Swamp buffalo occur only in small areas in the north-eastern part of the country and are not distinguished into breeds.
In 2003, the second-largest population lived in China, with 22.759 million head, all of the swamp type with breeds kept only in the lowlands, and other breeds kept only in the mountains; as of 2003, 3.2 million swamp-type carabao buffalo were in the Philippines, nearly three million swamp buffalo were in Vietnam, and 772,764 buffalo were in Bangladesh. About 750,000 head were estimated in Sri Lanka in 1997.
The water buffalo is the main dairy animal in Pakistan, with 23.47 million head in 2010. Of these, 76% are kept in the Punjab. The rest of them are mostly in the province of Sindh. Breeds used are Nili-Ravi, Kundi, and Azi Kheli. Karachi has the largest population of water buffalos for an area where fodder is not grown, consisting of 350,000 head kept mainly for milking.
In Thailand, the number of water buffalo dropped from more than 3 million head in 1996 to less than 1.24 million head in 2011. Slightly over 75% of them are kept in the country's northeastern region. The statistics also indicate that by the beginning of 2012, less than one million were in the country, partly as a result of illegal shipments to neighboring countries where sales prices are higher than in Thailand.
Water buffalo are also present in the southern region of Iraq, in the marshes. These marshes were drained by Saddam Hussein in 1991 in an attempt to punish the south for the uprisings of 1991. Following 2003, and the fall of the Saddam regime, these lands were reflooded and a 2007 report in the provinces of Maysan and Thi Qar shows a steady increase in the number of water buffalo. The report puts the number at 40,008 head in those two provinces.
IN EUROPE AND THE MEDITERRANEAN
Water buffalo likely were introduced to Europe from India or other Oriental countries. To Italy they were introduced about the year 600 in the reign of the Longobard King Agilulf. As they appear in the company of wild horses, they probably were a present from the Khan of the Avars, a Turkic nomadic tribe that dwelt near the Danube River at the time. Sir H. Johnston knew of a herd of water buffalo presented by a King of Naples to the Bey of Tunis in the mid-19th century that had resumed the feral state in northern Tunis.
European buffalo are all of the river type and considered to be of the same breed named Mediterranean buffalo. In Italy, the Mediterranean type was particularly selected and is called Mediterranean Italian breed to distinguish it from other European breeds, which differ genetically. Mediterranean buffalo are also found in Romania, Bulgaria, Greece, Albania, Kosovo, and the Republic of Macedonia, with a few hundred in the United Kingdom, Germany, the Netherlands, Switzerland, and Hungary. Little exchange of breeding buffalo has occurred among countries, so each population has its own phenotypic features and performances. In Bulgaria, they were crossbred with the Indian Murrah breed, and in Romania, some were crossbred with Bulgarian Murrah. Populations in Turkey are of the Anatolian buffalo breed.
IN AUSTRALIA
Between 1824 and 1849, water buffalo were introduced into the Northern Territory from Timor, Kisar, and probably other islands in the Indonesian archipelago. In 1886, a few milking types were brought from India to Darwin. They have been the main grazing animals on the subcoastal plains and river basins between Darwin and Arnhem Land since the 1880s. In the early 1960s, an estimated population of 150,000 to 200,000 buffalo were living in the plains and nearby areas.
They became feral and are causing significant environmental damage. Buffalo are also found in the Top End. As a result, they were hunted in the Top End from 1885 until 1980. The commencement of the brucellosis and tuberculosis campaign (BTEC) resulted in a huge culling program to reduce buffalo herds to a fraction of the numbers that were reached in the 1980s. The BTEC was finished when the Northern Territory was declared free of the disease in 1997. Numbers dropped dramatically as a result of the campaign, but have since recovered to an estimated 150,000 animals across northern Australia in 2008.
During the 1950s, buffalo were hunted for their skins and meat, which was exported and used in the local trade. In the late 1970s, live exports were made to Cuba and continued later into other countries. Buffalo are now crossed with riverine buffalo in artificial insemination programs, and may be found in many areas of Australia. Some of these crossbreds are used for milk production. Melville Island is a popular hunting location, where a steady population up to 4,000 individuals exists. Safari outfits are run from Darwin to Melville Island and other locations in the Top End, often with the use of bush pilots. The horns, which can measure up to a record of 3.1 m tip-to-tip, are prized hunting trophies.
The buffalo have developed a different appearance from the Indonesian buffalo from which they descend. They live mainly in freshwater marshes and billabongs, and their territory range can be quite expansive during the wet season. Their only natural predators in Australia are adult saltwater crocodiles, with whom they share the billabongs, and dingoes, which have been known to prey on buffalo calves and occasionally adult buffalo when the dingoes are in large packs.
Buffalo were exported live to Indonesia until 2011, at a rate of about 3000 per year. After the live export ban that year, the exports dropped to zero, and had not resumed as of June 2013.
IN SOUTH AMERICA
Water buffalo were introduced into the Amazon River basin in 1895. They are now extensively used there for meat and dairy production. In 2005, the buffalo herd in the Brazilian Amazon stood at roughly 1.6 million head, of which 460,000 were located in the lower Amazon floodplain. Breeds used include Mediterranean from Italy, Murrah and Jafarabadi from India, and Carabao from the Philippines.
During the 1970s, small herds were imported to Costa Rica, Ecuador, Cayenne, Panama, Surinam, Guyana, and Venezuela.
In Argentina, many game ranches raise water buffalo for commercial hunting
IN NORTH AMERICA
In 1974, four water buffalo were imported to the United States from Guam to be studied at the University of Florida. In February 1978, the first herd arrived for commercial farming. Until 2002, only one commercial breeder was in the United States. Water buffalo meat is imported from Australia. Until 2011, water buffalo were raised in Gainesville, Florida, from young obtained from zoo overflow. They were used primarily for meat production, frequently sold as hamburger.[38] Other US ranchers use them for production of high-quality mozzarella cheese.
HUSBANDRY
The husbandry system of water buffalo depends on the purpose for which they are bred and maintained. Most of them are kept by people who work on small farms in family units. Their buffalo live in very close association with them, and are often their greatest capital asset. The women and girls in India generally look after the milking buffalo while the men and boys are concerned with the working animals. Throughout Asia, they are commonly tended by children who are often seen leading or riding their charges to wallowing places. Water buffalo are the ideal animals for work in the deep mud of paddy fields because of their large hooves and flexible foot joints. They are often referred to as "the living tractor of the East". It probably is possible to plough deeper with buffalo than with either oxen or horses. They are the most efficient and economical means of cultivation of small fields. In most rice-producing countries, they are used for threshing and for transporting the sheaves during the rice harvest. They provide power for oilseed mills, sugarcane presses, and devices for raising water. They are widely used as pack animals, and in India and Pakistan also for heavy haulage. In their invasions of Europe, the Turks used buffalo for hauling heavy battering rams. Their dung is used as a fertilizer, and as a fuel when dried.
Buffalo contribute 72 million tones of milk and three million tones of meat annually to world food, much of it in areas that are prone to nutritional imbalances. In India, river-type buffalo are kept mainly for milk production and for transport, whereas swamp-type buffalo are kept mainly for work and a small amount of milk.
DAIRY PRODUCTS
Water buffalo milk presents physicochemical features different from that of other ruminant species, such as a higher content of fatty acids and proteins. The physical and chemical parameters of swamp and river type water buffalo milk differ. Water buffalo milk contains higher levels of total solids, crude protein, fat, calcium, and phosphorus, and slightly higher content of lactose compared with those of cow milk. The high level of total solids makes water buffalo milk ideal for processing into value-added dairy products such as cheese. The conjugated linoleic acid (CLA) content in milk ranged from 4.4 mg/g fat in September to 7.6 mg/g fat in June. Seasons and genetics may play a role in variation of CLA level and changes in gross composition of the water buffalo milk.
Water buffalo milk is processed into a large variety of dairy products:
- Cream churns much faster at higher fat levels and gives higher overrun than cow cream.
- Butter from water buffalo cream displays more stability than that from cow cream.
- Ghee from water buffalo milk has a different texture with a bigger grain size than ghee from cow milk.
- Heat-concentrated milk products in the Indian subcontinent include paneer, khoa, rabri, kheer and basundi.
- Fermented milk products include dahi, yogurt, and chakka.
- Whey is used for making ricotta and mascarpone in Italy, and alkarish in Syria and Egypt.
- Soft cheeses made include mozzarella in Italy, karish, mish, and domiati in Egypt, madhfor in Iraq, alghab in Syria, kesong puti in the Philippines, and vladeasa in Romania.
- The semihard cheese beyaz peynir is made in Turkey.
- Hard cheeses include braila in Romania, rahss in Egypt, white brine in Bulgaria, and akkawi in Syria.
- Watered-down buffalo milk is used as a cheaper alternative to regular milk.
MEAT AND SKIN PRODUCTS
Water buffalo meat, sometimes called "carabeef", is often passed off as beef in certain regions, and is also a major source of export revenue for India. In many Asian regions, buffalo meat is less preferred due to its toughness; however, recipes have evolved (rendang, for example) where the slow cooking process and spices not only make the meat palatable, but also preserve it, an important factor in hot climates where refrigeration is not always available.Their hides provide tough and useful leather, often used for shoes.
BONE AND HORN PRODUCTS
The bones and horns are often made into jewellery, especially earrings. Horns are used for the embouchure of musical instruments, such as ney and kaval.
ENVIRONMENTAL EFFECTS
Wildlife conservation scientists have started to recommend and use introduced populations of feral domestic water buffalo in far-away lands to manage uncontrolled vegetation growth in and around natural wetlands. Introduced water buffalo at home in such environs provide cheap service by regularly grazing the uncontrolled vegetation and opening up clogged water bodies for waterfowl, wetland birds, and other wildlife. Grazing water buffalo are sometimes used in Great Britain for conservation grazing, such as in Chippenham Fen National Nature Reserve. The buffalo can better adapt to wet conditions and poor-quality vegetation than cattle.
Currently, research is being conducted at the Lyle Center for Regenerative Studies to determine the levels of nutrients removed and returned to wetlands when water buffalo are used for wetland vegetation management.
However, in uncontrolled circumstances, water buffalo can cause environmental damage, such as trampling vegetation, disturbing bird and reptile nesting sites, and spreading exotic weeds.
RESEARCH
The world's first cloned buffalo was developed by Indian scientists from National Dairy Research Institute, Karnal. The buffalo calf was named Samrupa. The calf did not survive more than a week, and died due to some genetic disorders. So, the scientists created another cloned buffalo a few months later, and named it Garima.
On 15 September 2007, the Philippines announced its development of Southeast Asia's first cloned buffalo. The Philippine Council for Agriculture, Forestry and Natural Resources Research and Development (PCARRD), under the Department of Science and Technology in Los Baños, Laguna, approved this project. The Department of Agriculture's Philippine Carabao Center (PCC) will implement cloning through somatic cell nuclear transfer as a tool for genetic improvement in water buffalo. "Super buffalo calves" will be produced. There will be no modification or alteration of the genetic materials, as in genetically modified organisms.
On 1 January 2008, the Philippine Carabao Center in Nueva Ecija, per Filipino scientists, initiated a study to breed a super water buffalo that could produce 4 to 18 litres of milk per day using gene-based technology. Also, the first in vitro river buffalo was born there in 2004 from an in vitro-produced, vitrified embryo, named "Glory" after President Gloria Macapagal-Arroyo. Joseph Estrada's most successful project as an opposition senator, the PCC was created through Republic Act 3707, the Carabao Act of 1992.
IN CULTURE
Some ethnic groups, such as Batak and Toraja in Indonesia and the Derung in China, use water buffalo or kerbau (called horbo in Batak or tedong in Toraja) as sacrificial animals at several festivals.
- Legend has it that the Chinese philosophical sage Laozi left China through the Han Gu Pass riding a water buffalo.
- According to Hindu lore, the god of death Yama, rides on a male water buffalo.
- The carabao subspecies is considered a national symbol in the Philippines.
- In Vietnam, water buffalo are often the most valuable possession of poor farmers: "Con trâu là đầu cơ nghiệp". They are treated as a member of the family: "Chồng cày, vợ cấy, con trâu đi bừa" ("The husband ploughs, the wife sows, water buffalo draws the rake") and are friends of the children. Children talk to their water buffalo, "Bao giờ cây lúa còn bông. Thì còn ngọn cỏ ngoài đồng trâu ăn." (Vietnamese children are responsible for grazing water buffalo. They feed them grass if they work laboriously for men.) In the old days, West Lake, Hà Nội, was named Kim Ngưu - Golden Water Buffalo.
- The Yoruban Orisha Oya (goddess of change) takes the form of a water buffalo.
FIGHTING FESTIVALS
- Pasungay Festival is held annually in the town of San Joaquin, Iloilo in the Philippines.
- Moh juj Water Buffalo fighting, is held every year in Bhogali Bihu in Assam. Ahotguri in Nagaon is famous for it.
- Do Son Water Buffalo Fighting Festival of Vietnam, held each year on the ninth day of the eighth month of the lunar calendar at Do Son Township, Haiphong City in Vietnam, is one of the most popular Vietnam festivals and events in Haiphong City. The preparations for this buffalo fighting festival begin from the two to three months earlier. The competing buffalo are selected and methodically trained months in advance. It is a traditional festival of Vietnam attached to a Water God worshipping ceremony and the Hien Sinh custom to show martial spirit of the local people of Do Son, Haiphong.
- "Hai Luu" Water Buffalo Fighting Festival of Vietnam, According to ancient records, the buffalo fighting in Hai Luu Commune has existed from the 2nd century B.C. General Lu Gia at that time, had the buffalo slaughtered to give a feast to the local people and the warriors, and organized buffalo fighting for amusement. Eventually, all the fighting buffalo will be slaughtered as tributes to the deities.
- "Ko Samui" Water Buffalo Fighting Festival of Thailand, is a very popular event held on special occasions such as New Year's Day in January, and Songkran in mid-April, this festival features head-wrestling bouts in which two male Asian water buffalo are pitted against one another. Unlike in Spanish Bullfighting, wherein bulls get killed while fighting sword-wielding men, Buffalo Fighting Festival held at Ko Samui, Thailand is fairly harmless contest. The fighting season varies according to ancient customs & ceremonies. The first Buffalo to turn and run away is considered the loser, the winning buffalo becomes worth several million baht. Ko Samui is an island in the Gulf of Thailand in the South China Sea, it is 700 km from Bangkok and is connected to it by regular flights.
- "Ma'Pasilaga Tedong" Water Buffalo Fighting Festival, in Tana Toraja Regency of Sulawesi Island, Indonesia, is a very popular event where the Rambu Solo' or a Burial Festival took place in Tana Toraja.
RACING FESTIVALS
Carabao Carroza Festival is being held annually every May in the town of Pavia, Iloilo, Philippines.
Kambala races of Karnataka, India, take place between December and March. The races are conducted by having the water buffalo (he buffalo) run in long parallel slushy ditches, where they are driven by men standing on wooden planks drawn by the buffalo. The objectives of the race are to finish first and to raise the water to the greatest height and also a rural sport. Kambala races are arranged with competition, as well as without competition and as a part of thanks giving (to god) in about 50 villages of coastal Karnataka.
In the Chonburi Province of Thailand, and in Pakistan, there are annual water buffalo races.
Chon Buri Water buffalo racing festival, Thailand In downtown Chonburi, 70 km south of Bangkok, at the annual water buffalo festival held in mid-October. About 300 buffalo race in groups of five or six, spurred on by bareback jockeys wielding wooden sticks, as hundreds of spectators cheer. The water buffalo has always played an important role in agriculture in Thailand. For farmers of Chon Buri Province, near Bangkok, it is an important annual festival, beginning in mid-October. It is also a celebration among rice farmers before the rice harvest. At dawn, farmers walk their buffalo through surrounding rice fields, splashing them with water to keep them cool before leading them to the race field. This amazing festival started over a hundred years ago when two men arguing about whose buffalo was the fastest ended up having a race between them. That’s how it became a tradition and gradually a social event for farmers who gathered from around the country in Chonburi to trade their goods. The festival also helps a great deal in preserving the number of buffalo, which have been dwindling at quite an alarming rate in other regions. Modern machinery is rapidly replacing buffalo in Thai agriculture. With most of the farm work mechanized, the buffalo-racing tradition has continued. Racing buffalo are now raised just to race; they do not work at all. The few farm buffalo which still do work are much bigger than the racers because of the strenuous work they perform. Farm buffalo are in the "Buffalo Beauty Pageant", a Miss Farmer beauty contest and a comic buffalo costume contest etc.. This festival perfectly exemplifies a favored Thai attitude to life — "sanuk," meaning fun.
Babulang Water buffalo racing festival, Sarawak, Malaysia, is the largest or grandest of the many rituals, ceremonies and festivals of the traditional Bisaya (Borneo) community of Limbang, Sarawak. Highlights are the Ratu Babulang competition and the Water buffalo races which can only be found in this town in Sarawak, Malaysia.
Vihear Suor village Water buffalo racing festival, in Cambodia, each year, people visit Buddhist temples across the country to honor their deceased loved ones during a 15-day period commonly known as the Festival of the Dead but in Vihear Suor village, about 35 km northeast of Cambodia, citizens each year wrap up the festival with a water buffalo race to entertain visitors and honour a pledge made hundreds of years ago. There was a time when many village cattle which provide rural Cambodians with muscle power to plough their fields and transport agricultural products died from an unknown disease. The villagers prayed to a spirit to help save their animals from the disease and promised to show their gratitude by holding a buffalo race each year on the last day of "P'chum Ben" festival as it is known in Cambodian. The race draws hundreds of spectators who come to see riders and their animals charge down the racing field, the racers bouncing up and down on the backs of their buffalo, whose horns were draped with colorful cloth.
Pothu puttu matsaram, Kerala, South India, is similar to Kambala races.
WIKIPEDIA
The water buffalo or domestic Asian water buffalo (Bubalus bubalis) is a large bovid originating in South Asia, Southeast Asia, and China. Today, it is also found in Europe, Australia, and some American countries. The wild water buffalo (Bubalus arnee) native to Southeast Asia is considered a different species, but most likely represents the ancestor of the domestic water buffalo.
Two extant types of water buffalo are recognized based on morphological and behavioural criteria – the river buffalo of South Asia and further west to the Balkans, Egypt, and Italy, and the swamp buffalo, found from Assam in the west through Southeast Asia to the Yangtze valley of China in the east. The origins of the domestic water buffalo types are debated, although results of a phylogenetic study indicate that the swamp type may have originated in China and was domesticated about 4,000 years ago, while the river type may have originated from India and was domesticated about 5,000 years ago. Water buffalo were traded from the Indus Valley Civilisation to Mesopotamia, in modern Iraq, 2500 BC by the Meluhhas. The seal of a scribe employed by an Akkadian king shows the sacrifice of water buffalo.
At least 130 million domestic water buffalo exist, and more human beings depend on them than on any other domestic animal. They are especially suitable for tilling rice fields, and their milk is richer in fat and protein than that of dairy cattle. The large feral population of northern Australia became established in the late 19th century, and smaller feral herds are in New Guinea, Tunisia, and northeastern Argentina. Feral herds are also present in New Britain, New Ireland, Irian Jaya, Papua New Guinea, Colombia, Guyana, Suriname, Brazil, and Uruguay.
CHARACTERISTICS
The skin of river buffalo is black, but some specimens may have dark, slate-coloured skin. Swamp buffalo have a grey skin at birth, but become slate blue later. Albinoids are present in some populations. River buffalo have comparatively longer faces, smaller girths, and bigger limbs than swamp buffalo. Their dorsal ridges extend further back and taper off more gradually. Their horns grow downward and backward, then curve upward in a spiral. Swamp buffalo are heavy-bodied and stockily built; the body is short and the belly large. The forehead is flat, the eyes prominent, the face short, and the muzzle wide. The neck is comparatively long, and the withers and croup are prominent. A dorsal ridge extends backward and ends abruptly just before the end of the chest. Their horns grow outward, and curve in a semicircle, but always remain more or less on the plane of the forehead. The tail is short, reaching only to the hocks. Height at withers is 129–133 cm for males, and 120–127 cm for females. They range in weight from 300–550 kg, but weights of over 1,000 kg have also been observed.
Tedong bonga is a black pied buffalo featuring a unique black and white colouration that is favoured by the Toraja of Sulawesi.
The swamp buffalo has 48 chromosomes; the river buffalo has 50 chromosomes. The two types do not readily interbreed, but fertile offspring can occur. Buffalo-cattle hybrids have not been observed to occur, and the embryos of such hybrids do not reach maturity in laboratory experiments.
The rumen of the water buffalo has important differences from that of other ruminants. It contains a larger population of bacteria, particularly the cellulolytic bacteria, lower protozoa, and higher fungi zoospores. In addition, higher rumen ammonia nitrogen (NH4-N) and higher pH have been found as compared to those in cattle
ECOLOGY AND BEHAVIOR
River buffalo prefer deep water. Swamp buffalo prefer to wallow in mudholes which they make with their horns. During wallowing, they acquire a thick coating of mud. Both are well adapted to a hot and humid climate with temperatures ranging from 0 °C in the winter to 30 °C and greater in the summer. Water availability is important in hot climates, since they need wallows, rivers, or splashing water to assist in thermoregulation. Some breeds are adapted to saline seaside shores and saline sandy terrain.
DIET
Water buffalo thrive on many aquatic plants and during floods, will graze submerged, raising their heads above the water and carrying quantities of edible plants. They eat reeds (quassab), a giant reed (birdi), a kind of bulrush (kaulan), water hyacinth, and marsh grasses. Some of these plants are of great value to local peoples. Others, such as water hyacinth, are a major problem in some tropical valleys, and water buffalo may help to keep waterways clear.
Green fodders are used widely for intensive milk production and for fattening. Many fodder crops are conserved as hay, chaffed, or pulped. Fodders include alfalfa, berseem and bancheri, the leaves, stems or trimmings of banana, cassava, fodder beet, halfa, ipil-ipil and kenaf, maize, oats, pandarus, peanut, sorghum, soybean, sugarcane, bagasse, and turnips. Citrus pulp and pineapple wastes have been fed safely to buffalo. In Egypt, whole sun-dried dates are fed to milk-buffalo up to 25% of the standard feed mixture.
REPRODUCTION
Swamp buffalo generally become reproductive at an older age than river breeds. Young males in Egypt, India, and Pakistan are first mated at about 3.0–3.5 years of age, but in Italy
they may be used as early as 2 years of age. Successful mating behaviour may continue until the animal is 12 years or even older. A good river male can impregnate 100 females in a year. A strong seasonal influence on mating occurs. Heat stress reduces libido
Although buffalo are polyoestrous, their reproductive efficiency shows wide variation throughout the year. Buffalo cows exhibit a distinct seasonal change in displaying oestrus, conception rate, and calving rate. The age at first oestrus of heifers varies between breeds from 13–33 months, but mating at the first oestrus is often infertile and usually deferred until they are 3 years old. Gestation lasts from 281–334 days, but most reports give a range between 300 and 320 days. Swamp buffalo carry their calves for one or two weeks longer than river buffalo. It is not rare to find buffalo that continue to work well at the age of 30, and instances of a working life of 40 years are recorded.
TAXONOMIC HISTORY
Carl Linnaeus first described the genus Bos and the water buffalo under the binomial Bubalis bubalus in 1758; the latter was known to occur in Asia and as a domestic form in Italy. Ellerman and Morrison-Scott treated the wild and domestic forms of the water buffalo as conspecifics whereas others treated them as different species. The nomenclatorial treatment of wild and domestic forms has been inconsistent and varies between authors and even within the works of single authors.
In March 2003, the International Commission on Zoological Nomenclature achieved consistency in the naming of wild and domestic water buffalo by ruling that the scientific name Bubalus arnee is valid for the wild form. B. bubalis continues to be valid for the domestic form and applies also to feral populations.
DOMESTICATION AND BREEDING
Water buffalo were domesticated in India about 5000 years ago, and in China about 4000 years ago. Two types are recognized, based on morphological and behavioural criteria – the river buffalo of the Indian subcontinent and further west to the Balkans and Italy, and the swamp buffalo, found from Assam in the west through Southeast Asia to the Yangtze valley of China in the east. The present-day river buffalo is the result of complex domestication processes involving more than one maternal lineage and a significant maternal gene flow from wild populations after the initial domestication events. Twenty-two breeds of the river type water buffalo are known, including Murrah, Nili-Ravi, Surti, Jafarabadi, Anatolian, Mediterranean, and Egyptian buffalo. China has a huge variety of buffalo genetic resources, comprising 16 local swamp buffalo breeds in various regions.
Results of mitochondrial DNA analyses indicate that the two types were domesticated independently. Sequencing of cytochrome b genes of Bubalus species implies that the domestic buffalo originated from at least two populations, and that the river and the swamp types have differentiated at the full species level. The genetic distance between the two types is so large that a divergence time of about 1.7 million years has been suggested. The swamp type was noticed to have the closest relationship with the tamaraw.
DISTRIBUTION OF POPULATIONS
The water buffalo population in the world is about 172 million.
IN ASIA
More than 95.8% of the world population of water buffalo are found in Asia including both river and swamp types. The water buffalo population in India numbered over 97.9 million head in 2003, representing 56.5% of the world population. They are primarily of the river type, with 10 well-defined breeds comprising Badhawari, Murrah, Nili-Ravi, Jafarabadi, Marathwada, Mehsana, Nagpuri, Pandharpuri, Toda, and Surti. Swamp buffalo occur only in small areas in the north-eastern part of the country and are not distinguished into breeds.
In 2003, the second-largest population lived in China, with 22.759 million head, all of the swamp type with breeds kept only in the lowlands, and other breeds kept only in the mountains; as of 2003, 3.2 million swamp-type carabao buffalo were in the Philippines, nearly three million swamp buffalo were in Vietnam, and 772,764 buffalo were in Bangladesh. About 750,000 head were estimated in Sri Lanka in 1997.
The water buffalo is the main dairy animal in Pakistan, with 23.47 million head in 2010. Of these, 76% are kept in the Punjab. The rest of them are mostly in the province of Sindh. Breeds used are Nili-Ravi, Kundi, and Azi Kheli. Karachi has the largest population of water buffalos for an area where fodder is not grown, consisting of 350,000 head kept mainly for milking.
In Thailand, the number of water buffalo dropped from more than 3 million head in 1996 to less than 1.24 million head in 2011. Slightly over 75% of them are kept in the country's northeastern region. The statistics also indicate that by the beginning of 2012, less than one million were in the country, partly as a result of illegal shipments to neighboring countries where sales prices are higher than in Thailand.
Water buffalo are also present in the southern region of Iraq, in the marshes. These marshes were drained by Saddam Hussein in 1991 in an attempt to punish the south for the uprisings of 1991. Following 2003, and the fall of the Saddam regime, these lands were reflooded and a 2007 report in the provinces of Maysan and Thi Qar shows a steady increase in the number of water buffalo. The report puts the number at 40,008 head in those two provinces.
IN EUROPE AND THE MEDITERRANEAN
Water buffalo likely were introduced to Europe from India or other Oriental countries. To Italy they were introduced about the year 600 in the reign of the Longobard King Agilulf. As they appear in the company of wild horses, they probably were a present from the Khan of the Avars, a Turkic nomadic tribe that dwelt near the Danube River at the time. Sir H. Johnston knew of a herd of water buffalo presented by a King of Naples to the Bey of Tunis in the mid-19th century that had resumed the feral state in northern Tunis.
European buffalo are all of the river type and considered to be of the same breed named Mediterranean buffalo. In Italy, the Mediterranean type was particularly selected and is called Mediterranean Italian breed to distinguish it from other European breeds, which differ genetically. Mediterranean buffalo are also found in Romania, Bulgaria, Greece, Albania, Kosovo, and the Republic of Macedonia, with a few hundred in the United Kingdom, Germany, the Netherlands, Switzerland, and Hungary. Little exchange of breeding buffalo has occurred among countries, so each population has its own phenotypic features and performances. In Bulgaria, they were crossbred with the Indian Murrah breed, and in Romania, some were crossbred with Bulgarian Murrah. Populations in Turkey are of the Anatolian buffalo breed.
IN AUSTRALIA
Between 1824 and 1849, water buffalo were introduced into the Northern Territory from Timor, Kisar, and probably other islands in the Indonesian archipelago. In 1886, a few milking types were brought from India to Darwin. They have been the main grazing animals on the subcoastal plains and river basins between Darwin and Arnhem Land since the 1880s. In the early 1960s, an estimated population of 150,000 to 200,000 buffalo were living in the plains and nearby areas.
They became feral and are causing significant environmental damage. Buffalo are also found in the Top End. As a result, they were hunted in the Top End from 1885 until 1980. The commencement of the brucellosis and tuberculosis campaign (BTEC) resulted in a huge culling program to reduce buffalo herds to a fraction of the numbers that were reached in the 1980s. The BTEC was finished when the Northern Territory was declared free of the disease in 1997. Numbers dropped dramatically as a result of the campaign, but have since recovered to an estimated 150,000 animals across northern Australia in 2008.
During the 1950s, buffalo were hunted for their skins and meat, which was exported and used in the local trade. In the late 1970s, live exports were made to Cuba and continued later into other countries. Buffalo are now crossed with riverine buffalo in artificial insemination programs, and may be found in many areas of Australia. Some of these crossbreds are used for milk production. Melville Island is a popular hunting location, where a steady population up to 4,000 individuals exists. Safari outfits are run from Darwin to Melville Island and other locations in the Top End, often with the use of bush pilots. The horns, which can measure up to a record of 3.1 m tip-to-tip, are prized hunting trophies.
The buffalo have developed a different appearance from the Indonesian buffalo from which they descend. They live mainly in freshwater marshes and billabongs, and their territory range can be quite expansive during the wet season. Their only natural predators in Australia are adult saltwater crocodiles, with whom they share the billabongs, and dingoes, which have been known to prey on buffalo calves and occasionally adult buffalo when the dingoes are in large packs.
Buffalo were exported live to Indonesia until 2011, at a rate of about 3000 per year. After the live export ban that year, the exports dropped to zero, and had not resumed as of June 2013.
IN SOUTH AMERICA
Water buffalo were introduced into the Amazon River basin in 1895. They are now extensively used there for meat and dairy production. In 2005, the buffalo herd in the Brazilian Amazon stood at roughly 1.6 million head, of which 460,000 were located in the lower Amazon floodplain. Breeds used include Mediterranean from Italy, Murrah and Jafarabadi from India, and Carabao from the Philippines.
During the 1970s, small herds were imported to Costa Rica, Ecuador, Cayenne, Panama, Surinam, Guyana, and Venezuela.
In Argentina, many game ranches raise water buffalo for commercial hunting
IN NORTH AMERICA
In 1974, four water buffalo were imported to the United States from Guam to be studied at the University of Florida. In February 1978, the first herd arrived for commercial farming. Until 2002, only one commercial breeder was in the United States. Water buffalo meat is imported from Australia. Until 2011, water buffalo were raised in Gainesville, Florida, from young obtained from zoo overflow. They were used primarily for meat production, frequently sold as hamburger.[38] Other US ranchers use them for production of high-quality mozzarella cheese.
HUSBANDRY
The husbandry system of water buffalo depends on the purpose for which they are bred and maintained. Most of them are kept by people who work on small farms in family units. Their buffalo live in very close association with them, and are often their greatest capital asset. The women and girls in India generally look after the milking buffalo while the men and boys are concerned with the working animals. Throughout Asia, they are commonly tended by children who are often seen leading or riding their charges to wallowing places. Water buffalo are the ideal animals for work in the deep mud of paddy fields because of their large hooves and flexible foot joints. They are often referred to as "the living tractor of the East". It probably is possible to plough deeper with buffalo than with either oxen or horses. They are the most efficient and economical means of cultivation of small fields. In most rice-producing countries, they are used for threshing and for transporting the sheaves during the rice harvest. They provide power for oilseed mills, sugarcane presses, and devices for raising water. They are widely used as pack animals, and in India and Pakistan also for heavy haulage. In their invasions of Europe, the Turks used buffalo for hauling heavy battering rams. Their dung is used as a fertilizer, and as a fuel when dried.
Buffalo contribute 72 million tones of milk and three million tones of meat annually to world food, much of it in areas that are prone to nutritional imbalances. In India, river-type buffalo are kept mainly for milk production and for transport, whereas swamp-type buffalo are kept mainly for work and a small amount of milk.
DAIRY PRODUCTS
Water buffalo milk presents physicochemical features different from that of other ruminant species, such as a higher content of fatty acids and proteins. The physical and chemical parameters of swamp and river type water buffalo milk differ. Water buffalo milk contains higher levels of total solids, crude protein, fat, calcium, and phosphorus, and slightly higher content of lactose compared with those of cow milk. The high level of total solids makes water buffalo milk ideal for processing into value-added dairy products such as cheese. The conjugated linoleic acid (CLA) content in milk ranged from 4.4 mg/g fat in September to 7.6 mg/g fat in June. Seasons and genetics may play a role in variation of CLA level and changes in gross composition of the water buffalo milk.
Water buffalo milk is processed into a large variety of dairy products:
- Cream churns much faster at higher fat levels and gives higher overrun than cow cream.
- Butter from water buffalo cream displays more stability than that from cow cream.
- Ghee from water buffalo milk has a different texture with a bigger grain size than ghee from cow milk.
- Heat-concentrated milk products in the Indian subcontinent include paneer, khoa, rabri, kheer and basundi.
- Fermented milk products include dahi, yogurt, and chakka.
- Whey is used for making ricotta and mascarpone in Italy, and alkarish in Syria and Egypt.
- Soft cheeses made include mozzarella in Italy, karish, mish, and domiati in Egypt, madhfor in Iraq, alghab in Syria, kesong puti in the Philippines, and vladeasa in Romania.
- The semihard cheese beyaz peynir is made in Turkey.
- Hard cheeses include braila in Romania, rahss in Egypt, white brine in Bulgaria, and akkawi in Syria.
- Watered-down buffalo milk is used as a cheaper alternative to regular milk.
MEAT AND SKIN PRODUCTS
Water buffalo meat, sometimes called "carabeef", is often passed off as beef in certain regions, and is also a major source of export revenue for India. In many Asian regions, buffalo meat is less preferred due to its toughness; however, recipes have evolved (rendang, for example) where the slow cooking process and spices not only make the meat palatable, but also preserve it, an important factor in hot climates where refrigeration is not always available.Their hides provide tough and useful leather, often used for shoes.
BONE AND HORN PRODUCTS
The bones and horns are often made into jewellery, especially earrings. Horns are used for the embouchure of musical instruments, such as ney and kaval.
ENVIRONMENTAL EFFECTS
Wildlife conservation scientists have started to recommend and use introduced populations of feral domestic water buffalo in far-away lands to manage uncontrolled vegetation growth in and around natural wetlands. Introduced water buffalo at home in such environs provide cheap service by regularly grazing the uncontrolled vegetation and opening up clogged water bodies for waterfowl, wetland birds, and other wildlife. Grazing water buffalo are sometimes used in Great Britain for conservation grazing, such as in Chippenham Fen National Nature Reserve. The buffalo can better adapt to wet conditions and poor-quality vegetation than cattle.
Currently, research is being conducted at the Lyle Center for Regenerative Studies to determine the levels of nutrients removed and returned to wetlands when water buffalo are used for wetland vegetation management.
However, in uncontrolled circumstances, water buffalo can cause environmental damage, such as trampling vegetation, disturbing bird and reptile nesting sites, and spreading exotic weeds.
RESEARCH
The world's first cloned buffalo was developed by Indian scientists from National Dairy Research Institute, Karnal. The buffalo calf was named Samrupa. The calf did not survive more than a week, and died due to some genetic disorders. So, the scientists created another cloned buffalo a few months later, and named it Garima.
On 15 September 2007, the Philippines announced its development of Southeast Asia's first cloned buffalo. The Philippine Council for Agriculture, Forestry and Natural Resources Research and Development (PCARRD), under the Department of Science and Technology in Los Baños, Laguna, approved this project. The Department of Agriculture's Philippine Carabao Center (PCC) will implement cloning through somatic cell nuclear transfer as a tool for genetic improvement in water buffalo. "Super buffalo calves" will be produced. There will be no modification or alteration of the genetic materials, as in genetically modified organisms.
On 1 January 2008, the Philippine Carabao Center in Nueva Ecija, per Filipino scientists, initiated a study to breed a super water buffalo that could produce 4 to 18 litres of milk per day using gene-based technology. Also, the first in vitro river buffalo was born there in 2004 from an in vitro-produced, vitrified embryo, named "Glory" after President Gloria Macapagal-Arroyo. Joseph Estrada's most successful project as an opposition senator, the PCC was created through Republic Act 3707, the Carabao Act of 1992.
IN CULTURE
Some ethnic groups, such as Batak and Toraja in Indonesia and the Derung in China, use water buffalo or kerbau (called horbo in Batak or tedong in Toraja) as sacrificial animals at several festivals.
- Legend has it that the Chinese philosophical sage Laozi left China through the Han Gu Pass riding a water buffalo.
- According to Hindu lore, the god of death Yama, rides on a male water buffalo.
- The carabao subspecies is considered a national symbol in the Philippines.
- In Vietnam, water buffalo are often the most valuable possession of poor farmers: "Con trâu là đầu cơ nghiệp". They are treated as a member of the family: "Chồng cày, vợ cấy, con trâu đi bừa" ("The husband ploughs, the wife sows, water buffalo draws the rake") and are friends of the children. Children talk to their water buffalo, "Bao giờ cây lúa còn bông. Thì còn ngọn cỏ ngoài đồng trâu ăn." (Vietnamese children are responsible for grazing water buffalo. They feed them grass if they work laboriously for men.) In the old days, West Lake, Hà Nội, was named Kim Ngưu - Golden Water Buffalo.
- The Yoruban Orisha Oya (goddess of change) takes the form of a water buffalo.
FIGHTING FESTIVALS
- Pasungay Festival is held annually in the town of San Joaquin, Iloilo in the Philippines.
- Moh juj Water Buffalo fighting, is held every year in Bhogali Bihu in Assam. Ahotguri in Nagaon is famous for it.
- Do Son Water Buffalo Fighting Festival of Vietnam, held each year on the ninth day of the eighth month of the lunar calendar at Do Son Township, Haiphong City in Vietnam, is one of the most popular Vietnam festivals and events in Haiphong City. The preparations for this buffalo fighting festival begin from the two to three months earlier. The competing buffalo are selected and methodically trained months in advance. It is a traditional festival of Vietnam attached to a Water God worshipping ceremony and the Hien Sinh custom to show martial spirit of the local people of Do Son, Haiphong.
- "Hai Luu" Water Buffalo Fighting Festival of Vietnam, According to ancient records, the buffalo fighting in Hai Luu Commune has existed from the 2nd century B.C. General Lu Gia at that time, had the buffalo slaughtered to give a feast to the local people and the warriors, and organized buffalo fighting for amusement. Eventually, all the fighting buffalo will be slaughtered as tributes to the deities.
- "Ko Samui" Water Buffalo Fighting Festival of Thailand, is a very popular event held on special occasions such as New Year's Day in January, and Songkran in mid-April, this festival features head-wrestling bouts in which two male Asian water buffalo are pitted against one another. Unlike in Spanish Bullfighting, wherein bulls get killed while fighting sword-wielding men, Buffalo Fighting Festival held at Ko Samui, Thailand is fairly harmless contest. The fighting season varies according to ancient customs & ceremonies. The first Buffalo to turn and run away is considered the loser, the winning buffalo becomes worth several million baht. Ko Samui is an island in the Gulf of Thailand in the South China Sea, it is 700 km from Bangkok and is connected to it by regular flights.
- "Ma'Pasilaga Tedong" Water Buffalo Fighting Festival, in Tana Toraja Regency of Sulawesi Island, Indonesia, is a very popular event where the Rambu Solo' or a Burial Festival took place in Tana Toraja.
RACING FESTIVALS
Carabao Carroza Festival is being held annually every May in the town of Pavia, Iloilo, Philippines.
Kambala races of Karnataka, India, take place between December and March. The races are conducted by having the water buffalo (he buffalo) run in long parallel slushy ditches, where they are driven by men standing on wooden planks drawn by the buffalo. The objectives of the race are to finish first and to raise the water to the greatest height and also a rural sport. Kambala races are arranged with competition, as well as without competition and as a part of thanks giving (to god) in about 50 villages of coastal Karnataka.
In the Chonburi Province of Thailand, and in Pakistan, there are annual water buffalo races.
Chon Buri Water buffalo racing festival, Thailand In downtown Chonburi, 70 km south of Bangkok, at the annual water buffalo festival held in mid-October. About 300 buffalo race in groups of five or six, spurred on by bareback jockeys wielding wooden sticks, as hundreds of spectators cheer. The water buffalo has always played an important role in agriculture in Thailand. For farmers of Chon Buri Province, near Bangkok, it is an important annual festival, beginning in mid-October. It is also a celebration among rice farmers before the rice harvest. At dawn, farmers walk their buffalo through surrounding rice fields, splashing them with water to keep them cool before leading them to the race field. This amazing festival started over a hundred years ago when two men arguing about whose buffalo was the fastest ended up having a race between them. That’s how it became a tradition and gradually a social event for farmers who gathered from around the country in Chonburi to trade their goods. The festival also helps a great deal in preserving the number of buffalo, which have been dwindling at quite an alarming rate in other regions. Modern machinery is rapidly replacing buffalo in Thai agriculture. With most of the farm work mechanized, the buffalo-racing tradition has continued. Racing buffalo are now raised just to race; they do not work at all. The few farm buffalo which still do work are much bigger than the racers because of the strenuous work they perform. Farm buffalo are in the "Buffalo Beauty Pageant", a Miss Farmer beauty contest and a comic buffalo costume contest etc.. This festival perfectly exemplifies a favored Thai attitude to life — "sanuk," meaning fun.
Babulang Water buffalo racing festival, Sarawak, Malaysia, is the largest or grandest of the many rituals, ceremonies and festivals of the traditional Bisaya (Borneo) community of Limbang, Sarawak. Highlights are the Ratu Babulang competition and the Water buffalo races which can only be found in this town in Sarawak, Malaysia.
Vihear Suor village Water buffalo racing festival, in Cambodia, each year, people visit Buddhist temples across the country to honor their deceased loved ones during a 15-day period commonly known as the Festival of the Dead but in Vihear Suor village, about 35 km northeast of Cambodia, citizens each year wrap up the festival with a water buffalo race to entertain visitors and honour a pledge made hundreds of years ago. There was a time when many village cattle which provide rural Cambodians with muscle power to plough their fields and transport agricultural products died from an unknown disease. The villagers prayed to a spirit to help save their animals from the disease and promised to show their gratitude by holding a buffalo race each year on the last day of "P'chum Ben" festival as it is known in Cambodian. The race draws hundreds of spectators who come to see riders and their animals charge down the racing field, the racers bouncing up and down on the backs of their buffalo, whose horns were draped with colorful cloth.
Pothu puttu matsaram, Kerala, South India, is similar to Kambala races.
WIKIPEDIA
The water buffalo or domestic Asian water buffalo (Bubalus bubalis) is a large bovid originating in South Asia, Southeast Asia, and China. Today, it is also found in Europe, Australia, and some American countries. The wild water buffalo (Bubalus arnee) native to Southeast Asia is considered a different species, but most likely represents the ancestor of the domestic water buffalo.
Two extant types of water buffalo are recognized based on morphological and behavioural criteria – the river buffalo of South Asia and further west to the Balkans, Egypt, and Italy, and the swamp buffalo, found from Assam in the west through Southeast Asia to the Yangtze valley of China in the east. The origins of the domestic water buffalo types are debated, although results of a phylogenetic study indicate that the swamp type may have originated in China and was domesticated about 4,000 years ago, while the river type may have originated from India and was domesticated about 5,000 years ago. Water buffalo were traded from the Indus Valley Civilisation to Mesopotamia, in modern Iraq, 2500 BC by the Meluhhas. The seal of a scribe employed by an Akkadian king shows the sacrifice of water buffalo.
At least 130 million domestic water buffalo exist, and more human beings depend on them than on any other domestic animal. They are especially suitable for tilling rice fields, and their milk is richer in fat and protein than that of dairy cattle. The large feral population of northern Australia became established in the late 19th century, and smaller feral herds are in New Guinea, Tunisia, and northeastern Argentina. Feral herds are also present in New Britain, New Ireland, Irian Jaya, Papua New Guinea, Colombia, Guyana, Suriname, Brazil, and Uruguay.
CHARACTERISTICS
The skin of river buffalo is black, but some specimens may have dark, slate-coloured skin. Swamp buffalo have a grey skin at birth, but become slate blue later. Albinoids are present in some populations. River buffalo have comparatively longer faces, smaller girths, and bigger limbs than swamp buffalo. Their dorsal ridges extend further back and taper off more gradually. Their horns grow downward and backward, then curve upward in a spiral. Swamp buffalo are heavy-bodied and stockily built; the body is short and the belly large. The forehead is flat, the eyes prominent, the face short, and the muzzle wide. The neck is comparatively long, and the withers and croup are prominent. A dorsal ridge extends backward and ends abruptly just before the end of the chest. Their horns grow outward, and curve in a semicircle, but always remain more or less on the plane of the forehead. The tail is short, reaching only to the hocks. Height at withers is 129–133 cm for males, and 120–127 cm for females. They range in weight from 300–550 kg, but weights of over 1,000 kg have also been observed.
Tedong bonga is a black pied buffalo featuring a unique black and white colouration that is favoured by the Toraja of Sulawesi.
The swamp buffalo has 48 chromosomes; the river buffalo has 50 chromosomes. The two types do not readily interbreed, but fertile offspring can occur. Buffalo-cattle hybrids have not been observed to occur, and the embryos of such hybrids do not reach maturity in laboratory experiments.
The rumen of the water buffalo has important differences from that of other ruminants. It contains a larger population of bacteria, particularly the cellulolytic bacteria, lower protozoa, and higher fungi zoospores. In addition, higher rumen ammonia nitrogen (NH4-N) and higher pH have been found as compared to those in cattle
ECOLOGY AND BEHAVIOR
River buffalo prefer deep water. Swamp buffalo prefer to wallow in mudholes which they make with their horns. During wallowing, they acquire a thick coating of mud. Both are well adapted to a hot and humid climate with temperatures ranging from 0 °C in the winter to 30 °C and greater in the summer. Water availability is important in hot climates, since they need wallows, rivers, or splashing water to assist in thermoregulation. Some breeds are adapted to saline seaside shores and saline sandy terrain.
DIET
Water buffalo thrive on many aquatic plants and during floods, will graze submerged, raising their heads above the water and carrying quantities of edible plants. They eat reeds (quassab), a giant reed (birdi), a kind of bulrush (kaulan), water hyacinth, and marsh grasses. Some of these plants are of great value to local peoples. Others, such as water hyacinth, are a major problem in some tropical valleys, and water buffalo may help to keep waterways clear.
Green fodders are used widely for intensive milk production and for fattening. Many fodder crops are conserved as hay, chaffed, or pulped. Fodders include alfalfa, berseem and bancheri, the leaves, stems or trimmings of banana, cassava, fodder beet, halfa, ipil-ipil and kenaf, maize, oats, pandarus, peanut, sorghum, soybean, sugarcane, bagasse, and turnips. Citrus pulp and pineapple wastes have been fed safely to buffalo. In Egypt, whole sun-dried dates are fed to milk-buffalo up to 25% of the standard feed mixture.
REPRODUCTION
Swamp buffalo generally become reproductive at an older age than river breeds. Young males in Egypt, India, and Pakistan are first mated at about 3.0–3.5 years of age, but in Italy
they may be used as early as 2 years of age. Successful mating behaviour may continue until the animal is 12 years or even older. A good river male can impregnate 100 females in a year. A strong seasonal influence on mating occurs. Heat stress reduces libido
Although buffalo are polyoestrous, their reproductive efficiency shows wide variation throughout the year. Buffalo cows exhibit a distinct seasonal change in displaying oestrus, conception rate, and calving rate. The age at first oestrus of heifers varies between breeds from 13–33 months, but mating at the first oestrus is often infertile and usually deferred until they are 3 years old. Gestation lasts from 281–334 days, but most reports give a range between 300 and 320 days. Swamp buffalo carry their calves for one or two weeks longer than river buffalo. It is not rare to find buffalo that continue to work well at the age of 30, and instances of a working life of 40 years are recorded.
TAXONOMIC HISTORY
Carl Linnaeus first described the genus Bos and the water buffalo under the binomial Bubalis bubalus in 1758; the latter was known to occur in Asia and as a domestic form in Italy. Ellerman and Morrison-Scott treated the wild and domestic forms of the water buffalo as conspecifics whereas others treated them as different species. The nomenclatorial treatment of wild and domestic forms has been inconsistent and varies between authors and even within the works of single authors.
In March 2003, the International Commission on Zoological Nomenclature achieved consistency in the naming of wild and domestic water buffalo by ruling that the scientific name Bubalus arnee is valid for the wild form. B. bubalis continues to be valid for the domestic form and applies also to feral populations.
DOMESTICATION AND BREEDING
Water buffalo were domesticated in India about 5000 years ago, and in China about 4000 years ago. Two types are recognized, based on morphological and behavioural criteria – the river buffalo of the Indian subcontinent and further west to the Balkans and Italy, and the swamp buffalo, found from Assam in the west through Southeast Asia to the Yangtze valley of China in the east. The present-day river buffalo is the result of complex domestication processes involving more than one maternal lineage and a significant maternal gene flow from wild populations after the initial domestication events. Twenty-two breeds of the river type water buffalo are known, including Murrah, Nili-Ravi, Surti, Jafarabadi, Anatolian, Mediterranean, and Egyptian buffalo. China has a huge variety of buffalo genetic resources, comprising 16 local swamp buffalo breeds in various regions.
Results of mitochondrial DNA analyses indicate that the two types were domesticated independently. Sequencing of cytochrome b genes of Bubalus species implies that the domestic buffalo originated from at least two populations, and that the river and the swamp types have differentiated at the full species level. The genetic distance between the two types is so large that a divergence time of about 1.7 million years has been suggested. The swamp type was noticed to have the closest relationship with the tamaraw.
DISTRIBUTION OF POPULATIONS
The water buffalo population in the world is about 172 million.
IN ASIA
More than 95.8% of the world population of water buffalo are found in Asia including both river and swamp types. The water buffalo population in India numbered over 97.9 million head in 2003, representing 56.5% of the world population. They are primarily of the river type, with 10 well-defined breeds comprising Badhawari, Murrah, Nili-Ravi, Jafarabadi, Marathwada, Mehsana, Nagpuri, Pandharpuri, Toda, and Surti. Swamp buffalo occur only in small areas in the north-eastern part of the country and are not distinguished into breeds.
In 2003, the second-largest population lived in China, with 22.759 million head, all of the swamp type with breeds kept only in the lowlands, and other breeds kept only in the mountains; as of 2003, 3.2 million swamp-type carabao buffalo were in the Philippines, nearly three million swamp buffalo were in Vietnam, and 772,764 buffalo were in Bangladesh. About 750,000 head were estimated in Sri Lanka in 1997.
The water buffalo is the main dairy animal in Pakistan, with 23.47 million head in 2010. Of these, 76% are kept in the Punjab. The rest of them are mostly in the province of Sindh. Breeds used are Nili-Ravi, Kundi, and Azi Kheli. Karachi has the largest population of water buffalos for an area where fodder is not grown, consisting of 350,000 head kept mainly for milking.
In Thailand, the number of water buffalo dropped from more than 3 million head in 1996 to less than 1.24 million head in 2011. Slightly over 75% of them are kept in the country's northeastern region. The statistics also indicate that by the beginning of 2012, less than one million were in the country, partly as a result of illegal shipments to neighboring countries where sales prices are higher than in Thailand.
Water buffalo are also present in the southern region of Iraq, in the marshes. These marshes were drained by Saddam Hussein in 1991 in an attempt to punish the south for the uprisings of 1991. Following 2003, and the fall of the Saddam regime, these lands were reflooded and a 2007 report in the provinces of Maysan and Thi Qar shows a steady increase in the number of water buffalo. The report puts the number at 40,008 head in those two provinces.
IN EUROPE AND THE MEDITERRANEAN
Water buffalo likely were introduced to Europe from India or other Oriental countries. To Italy they were introduced about the year 600 in the reign of the Longobard King Agilulf. As they appear in the company of wild horses, they probably were a present from the Khan of the Avars, a Turkic nomadic tribe that dwelt near the Danube River at the time. Sir H. Johnston knew of a herd of water buffalo presented by a King of Naples to the Bey of Tunis in the mid-19th century that had resumed the feral state in northern Tunis.
European buffalo are all of the river type and considered to be of the same breed named Mediterranean buffalo. In Italy, the Mediterranean type was particularly selected and is called Mediterranean Italian breed to distinguish it from other European breeds, which differ genetically. Mediterranean buffalo are also found in Romania, Bulgaria, Greece, Albania, Kosovo, and the Republic of Macedonia, with a few hundred in the United Kingdom, Germany, the Netherlands, Switzerland, and Hungary. Little exchange of breeding buffalo has occurred among countries, so each population has its own phenotypic features and performances. In Bulgaria, they were crossbred with the Indian Murrah breed, and in Romania, some were crossbred with Bulgarian Murrah. Populations in Turkey are of the Anatolian buffalo breed.
IN AUSTRALIA
Between 1824 and 1849, water buffalo were introduced into the Northern Territory from Timor, Kisar, and probably other islands in the Indonesian archipelago. In 1886, a few milking types were brought from India to Darwin. They have been the main grazing animals on the subcoastal plains and river basins between Darwin and Arnhem Land since the 1880s. In the early 1960s, an estimated population of 150,000 to 200,000 buffalo were living in the plains and nearby areas.
They became feral and are causing significant environmental damage. Buffalo are also found in the Top End. As a result, they were hunted in the Top End from 1885 until 1980. The commencement of the brucellosis and tuberculosis campaign (BTEC) resulted in a huge culling program to reduce buffalo herds to a fraction of the numbers that were reached in the 1980s. The BTEC was finished when the Northern Territory was declared free of the disease in 1997. Numbers dropped dramatically as a result of the campaign, but have since recovered to an estimated 150,000 animals across northern Australia in 2008.
During the 1950s, buffalo were hunted for their skins and meat, which was exported and used in the local trade. In the late 1970s, live exports were made to Cuba and continued later into other countries. Buffalo are now crossed with riverine buffalo in artificial insemination programs, and may be found in many areas of Australia. Some of these crossbreds are used for milk production. Melville Island is a popular hunting location, where a steady population up to 4,000 individuals exists. Safari outfits are run from Darwin to Melville Island and other locations in the Top End, often with the use of bush pilots. The horns, which can measure up to a record of 3.1 m tip-to-tip, are prized hunting trophies.
The buffalo have developed a different appearance from the Indonesian buffalo from which they descend. They live mainly in freshwater marshes and billabongs, and their territory range can be quite expansive during the wet season. Their only natural predators in Australia are adult saltwater crocodiles, with whom they share the billabongs, and dingoes, which have been known to prey on buffalo calves and occasionally adult buffalo when the dingoes are in large packs.
Buffalo were exported live to Indonesia until 2011, at a rate of about 3000 per year. After the live export ban that year, the exports dropped to zero, and had not resumed as of June 2013.
IN SOUTH AMERICA
Water buffalo were introduced into the Amazon River basin in 1895. They are now extensively used there for meat and dairy production. In 2005, the buffalo herd in the Brazilian Amazon stood at roughly 1.6 million head, of which 460,000 were located in the lower Amazon floodplain. Breeds used include Mediterranean from Italy, Murrah and Jafarabadi from India, and Carabao from the Philippines.
During the 1970s, small herds were imported to Costa Rica, Ecuador, Cayenne, Panama, Surinam, Guyana, and Venezuela.
In Argentina, many game ranches raise water buffalo for commercial hunting
IN NORTH AMERICA
In 1974, four water buffalo were imported to the United States from Guam to be studied at the University of Florida. In February 1978, the first herd arrived for commercial farming. Until 2002, only one commercial breeder was in the United States. Water buffalo meat is imported from Australia. Until 2011, water buffalo were raised in Gainesville, Florida, from young obtained from zoo overflow. They were used primarily for meat production, frequently sold as hamburger.[38] Other US ranchers use them for production of high-quality mozzarella cheese.
HUSBANDRY
The husbandry system of water buffalo depends on the purpose for which they are bred and maintained. Most of them are kept by people who work on small farms in family units. Their buffalo live in very close association with them, and are often their greatest capital asset. The women and girls in India generally look after the milking buffalo while the men and boys are concerned with the working animals. Throughout Asia, they are commonly tended by children who are often seen leading or riding their charges to wallowing places. Water buffalo are the ideal animals for work in the deep mud of paddy fields because of their large hooves and flexible foot joints. They are often referred to as "the living tractor of the East". It probably is possible to plough deeper with buffalo than with either oxen or horses. They are the most efficient and economical means of cultivation of small fields. In most rice-producing countries, they are used for threshing and for transporting the sheaves during the rice harvest. They provide power for oilseed mills, sugarcane presses, and devices for raising water. They are widely used as pack animals, and in India and Pakistan also for heavy haulage. In their invasions of Europe, the Turks used buffalo for hauling heavy battering rams. Their dung is used as a fertilizer, and as a fuel when dried.
Buffalo contribute 72 million tones of milk and three million tones of meat annually to world food, much of it in areas that are prone to nutritional imbalances. In India, river-type buffalo are kept mainly for milk production and for transport, whereas swamp-type buffalo are kept mainly for work and a small amount of milk.
DAIRY PRODUCTS
Water buffalo milk presents physicochemical features different from that of other ruminant species, such as a higher content of fatty acids and proteins. The physical and chemical parameters of swamp and river type water buffalo milk differ. Water buffalo milk contains higher levels of total solids, crude protein, fat, calcium, and phosphorus, and slightly higher content of lactose compared with those of cow milk. The high level of total solids makes water buffalo milk ideal for processing into value-added dairy products such as cheese. The conjugated linoleic acid (CLA) content in milk ranged from 4.4 mg/g fat in September to 7.6 mg/g fat in June. Seasons and genetics may play a role in variation of CLA level and changes in gross composition of the water buffalo milk.
Water buffalo milk is processed into a large variety of dairy products:
- Cream churns much faster at higher fat levels and gives higher overrun than cow cream.
- Butter from water buffalo cream displays more stability than that from cow cream.
- Ghee from water buffalo milk has a different texture with a bigger grain size than ghee from cow milk.
- Heat-concentrated milk products in the Indian subcontinent include paneer, khoa, rabri, kheer and basundi.
- Fermented milk products include dahi, yogurt, and chakka.
- Whey is used for making ricotta and mascarpone in Italy, and alkarish in Syria and Egypt.
- Soft cheeses made include mozzarella in Italy, karish, mish, and domiati in Egypt, madhfor in Iraq, alghab in Syria, kesong puti in the Philippines, and vladeasa in Romania.
- The semihard cheese beyaz peynir is made in Turkey.
- Hard cheeses include braila in Romania, rahss in Egypt, white brine in Bulgaria, and akkawi in Syria.
- Watered-down buffalo milk is used as a cheaper alternative to regular milk.
MEAT AND SKIN PRODUCTS
Water buffalo meat, sometimes called "carabeef", is often passed off as beef in certain regions, and is also a major source of export revenue for India. In many Asian regions, buffalo meat is less preferred due to its toughness; however, recipes have evolved (rendang, for example) where the slow cooking process and spices not only make the meat palatable, but also preserve it, an important factor in hot climates where refrigeration is not always available.Their hides provide tough and useful leather, often used for shoes.
BONE AND HORN PRODUCTS
The bones and horns are often made into jewellery, especially earrings. Horns are used for the embouchure of musical instruments, such as ney and kaval.
ENVIRONMENTAL EFFECTS
Wildlife conservation scientists have started to recommend and use introduced populations of feral domestic water buffalo in far-away lands to manage uncontrolled vegetation growth in and around natural wetlands. Introduced water buffalo at home in such environs provide cheap service by regularly grazing the uncontrolled vegetation and opening up clogged water bodies for waterfowl, wetland birds, and other wildlife. Grazing water buffalo are sometimes used in Great Britain for conservation grazing, such as in Chippenham Fen National Nature Reserve. The buffalo can better adapt to wet conditions and poor-quality vegetation than cattle.
Currently, research is being conducted at the Lyle Center for Regenerative Studies to determine the levels of nutrients removed and returned to wetlands when water buffalo are used for wetland vegetation management.
However, in uncontrolled circumstances, water buffalo can cause environmental damage, such as trampling vegetation, disturbing bird and reptile nesting sites, and spreading exotic weeds.
RESEARCH
The world's first cloned buffalo was developed by Indian scientists from National Dairy Research Institute, Karnal. The buffalo calf was named Samrupa. The calf did not survive more than a week, and died due to some genetic disorders. So, the scientists created another cloned buffalo a few months later, and named it Garima.
On 15 September 2007, the Philippines announced its development of Southeast Asia's first cloned buffalo. The Philippine Council for Agriculture, Forestry and Natural Resources Research and Development (PCARRD), under the Department of Science and Technology in Los Baños, Laguna, approved this project. The Department of Agriculture's Philippine Carabao Center (PCC) will implement cloning through somatic cell nuclear transfer as a tool for genetic improvement in water buffalo. "Super buffalo calves" will be produced. There will be no modification or alteration of the genetic materials, as in genetically modified organisms.
On 1 January 2008, the Philippine Carabao Center in Nueva Ecija, per Filipino scientists, initiated a study to breed a super water buffalo that could produce 4 to 18 litres of milk per day using gene-based technology. Also, the first in vitro river buffalo was born there in 2004 from an in vitro-produced, vitrified embryo, named "Glory" after President Gloria Macapagal-Arroyo. Joseph Estrada's most successful project as an opposition senator, the PCC was created through Republic Act 3707, the Carabao Act of 1992.
IN CULTURE
Some ethnic groups, such as Batak and Toraja in Indonesia and the Derung in China, use water buffalo or kerbau (called horbo in Batak or tedong in Toraja) as sacrificial animals at several festivals.
- Legend has it that the Chinese philosophical sage Laozi left China through the Han Gu Pass riding a water buffalo.
- According to Hindu lore, the god of death Yama, rides on a male water buffalo.
- The carabao subspecies is considered a national symbol in the Philippines.
- In Vietnam, water buffalo are often the most valuable possession of poor farmers: "Con trâu là đầu cơ nghiệp". They are treated as a member of the family: "Chồng cày, vợ cấy, con trâu đi bừa" ("The husband ploughs, the wife sows, water buffalo draws the rake") and are friends of the children. Children talk to their water buffalo, "Bao giờ cây lúa còn bông. Thì còn ngọn cỏ ngoài đồng trâu ăn." (Vietnamese children are responsible for grazing water buffalo. They feed them grass if they work laboriously for men.) In the old days, West Lake, Hà Nội, was named Kim Ngưu - Golden Water Buffalo.
- The Yoruban Orisha Oya (goddess of change) takes the form of a water buffalo.
FIGHTING FESTIVALS
- Pasungay Festival is held annually in the town of San Joaquin, Iloilo in the Philippines.
- Moh juj Water Buffalo fighting, is held every year in Bhogali Bihu in Assam. Ahotguri in Nagaon is famous for it.
- Do Son Water Buffalo Fighting Festival of Vietnam, held each year on the ninth day of the eighth month of the lunar calendar at Do Son Township, Haiphong City in Vietnam, is one of the most popular Vietnam festivals and events in Haiphong City. The preparations for this buffalo fighting festival begin from the two to three months earlier. The competing buffalo are selected and methodically trained months in advance. It is a traditional festival of Vietnam attached to a Water God worshipping ceremony and the Hien Sinh custom to show martial spirit of the local people of Do Son, Haiphong.
- "Hai Luu" Water Buffalo Fighting Festival of Vietnam, According to ancient records, the buffalo fighting in Hai Luu Commune has existed from the 2nd century B.C. General Lu Gia at that time, had the buffalo slaughtered to give a feast to the local people and the warriors, and organized buffalo fighting for amusement. Eventually, all the fighting buffalo will be slaughtered as tributes to the deities.
- "Ko Samui" Water Buffalo Fighting Festival of Thailand, is a very popular event held on special occasions such as New Year's Day in January, and Songkran in mid-April, this festival features head-wrestling bouts in which two male Asian water buffalo are pitted against one another. Unlike in Spanish Bullfighting, wherein bulls get killed while fighting sword-wielding men, Buffalo Fighting Festival held at Ko Samui, Thailand is fairly harmless contest. The fighting season varies according to ancient customs & ceremonies. The first Buffalo to turn and run away is considered the loser, the winning buffalo becomes worth several million baht. Ko Samui is an island in the Gulf of Thailand in the South China Sea, it is 700 km from Bangkok and is connected to it by regular flights.
- "Ma'Pasilaga Tedong" Water Buffalo Fighting Festival, in Tana Toraja Regency of Sulawesi Island, Indonesia, is a very popular event where the Rambu Solo' or a Burial Festival took place in Tana Toraja.
RACING FESTIVALS
Carabao Carroza Festival is being held annually every May in the town of Pavia, Iloilo, Philippines.
Kambala races of Karnataka, India, take place between December and March. The races are conducted by having the water buffalo (he buffalo) run in long parallel slushy ditches, where they are driven by men standing on wooden planks drawn by the buffalo. The objectives of the race are to finish first and to raise the water to the greatest height and also a rural sport. Kambala races are arranged with competition, as well as without competition and as a part of thanks giving (to god) in about 50 villages of coastal Karnataka.
In the Chonburi Province of Thailand, and in Pakistan, there are annual water buffalo races.
Chon Buri Water buffalo racing festival, Thailand In downtown Chonburi, 70 km south of Bangkok, at the annual water buffalo festival held in mid-October. About 300 buffalo race in groups of five or six, spurred on by bareback jockeys wielding wooden sticks, as hundreds of spectators cheer. The water buffalo has always played an important role in agriculture in Thailand. For farmers of Chon Buri Province, near Bangkok, it is an important annual festival, beginning in mid-October. It is also a celebration among rice farmers before the rice harvest. At dawn, farmers walk their buffalo through surrounding rice fields, splashing them with water to keep them cool before leading them to the race field. This amazing festival started over a hundred years ago when two men arguing about whose buffalo was the fastest ended up having a race between them. That’s how it became a tradition and gradually a social event for farmers who gathered from around the country in Chonburi to trade their goods. The festival also helps a great deal in preserving the number of buffalo, which have been dwindling at quite an alarming rate in other regions. Modern machinery is rapidly replacing buffalo in Thai agriculture. With most of the farm work mechanized, the buffalo-racing tradition has continued. Racing buffalo are now raised just to race; they do not work at all. The few farm buffalo which still do work are much bigger than the racers because of the strenuous work they perform. Farm buffalo are in the "Buffalo Beauty Pageant", a Miss Farmer beauty contest and a comic buffalo costume contest etc.. This festival perfectly exemplifies a favored Thai attitude to life — "sanuk," meaning fun.
Babulang Water buffalo racing festival, Sarawak, Malaysia, is the largest or grandest of the many rituals, ceremonies and festivals of the traditional Bisaya (Borneo) community of Limbang, Sarawak. Highlights are the Ratu Babulang competition and the Water buffalo races which can only be found in this town in Sarawak, Malaysia.
Vihear Suor village Water buffalo racing festival, in Cambodia, each year, people visit Buddhist temples across the country to honor their deceased loved ones during a 15-day period commonly known as the Festival of the Dead but in Vihear Suor village, about 35 km northeast of Cambodia, citizens each year wrap up the festival with a water buffalo race to entertain visitors and honour a pledge made hundreds of years ago. There was a time when many village cattle which provide rural Cambodians with muscle power to plough their fields and transport agricultural products died from an unknown disease. The villagers prayed to a spirit to help save their animals from the disease and promised to show their gratitude by holding a buffalo race each year on the last day of "P'chum Ben" festival as it is known in Cambodian. The race draws hundreds of spectators who come to see riders and their animals charge down the racing field, the racers bouncing up and down on the backs of their buffalo, whose horns were draped with colorful cloth.
Pothu puttu matsaram, Kerala, South India, is similar to Kambala races.
WIKIPEDIA
The water buffalo or domestic Asian water buffalo (Bubalus bubalis) is a large bovid originating in South Asia, Southeast Asia, and China. Today, it is also found in Europe, Australia, and some American countries. The wild water buffalo (Bubalus arnee) native to Southeast Asia is considered a different species, but most likely represents the ancestor of the domestic water buffalo.
Two extant types of water buffalo are recognized based on morphological and behavioural criteria – the river buffalo of South Asia and further west to the Balkans, Egypt, and Italy, and the swamp buffalo, found from Assam in the west through Southeast Asia to the Yangtze valley of China in the east. The origins of the domestic water buffalo types are debated, although results of a phylogenetic study indicate that the swamp type may have originated in China and was domesticated about 4,000 years ago, while the river type may have originated from India and was domesticated about 5,000 years ago. Water buffalo were traded from the Indus Valley Civilisation to Mesopotamia, in modern Iraq, 2500 BC by the Meluhhas. The seal of a scribe employed by an Akkadian king shows the sacrifice of water buffalo.
At least 130 million domestic water buffalo exist, and more human beings depend on them than on any other domestic animal. They are especially suitable for tilling rice fields, and their milk is richer in fat and protein than that of dairy cattle. The large feral population of northern Australia became established in the late 19th century, and smaller feral herds are in New Guinea, Tunisia, and northeastern Argentina. Feral herds are also present in New Britain, New Ireland, Irian Jaya, Papua New Guinea, Colombia, Guyana, Suriname, Brazil, and Uruguay.
CHARACTERISTICS
The skin of river buffalo is black, but some specimens may have dark, slate-coloured skin. Swamp buffalo have a grey skin at birth, but become slate blue later. Albinoids are present in some populations. River buffalo have comparatively longer faces, smaller girths, and bigger limbs than swamp buffalo. Their dorsal ridges extend further back and taper off more gradually. Their horns grow downward and backward, then curve upward in a spiral. Swamp buffalo are heavy-bodied and stockily built; the body is short and the belly large. The forehead is flat, the eyes prominent, the face short, and the muzzle wide. The neck is comparatively long, and the withers and croup are prominent. A dorsal ridge extends backward and ends abruptly just before the end of the chest. Their horns grow outward, and curve in a semicircle, but always remain more or less on the plane of the forehead. The tail is short, reaching only to the hocks. Height at withers is 129–133 cm for males, and 120–127 cm for females. They range in weight from 300–550 kg, but weights of over 1,000 kg have also been observed.
Tedong bonga is a black pied buffalo featuring a unique black and white colouration that is favoured by the Toraja of Sulawesi.
The swamp buffalo has 48 chromosomes; the river buffalo has 50 chromosomes. The two types do not readily interbreed, but fertile offspring can occur. Buffalo-cattle hybrids have not been observed to occur, and the embryos of such hybrids do not reach maturity in laboratory experiments.
The rumen of the water buffalo has important differences from that of other ruminants. It contains a larger population of bacteria, particularly the cellulolytic bacteria, lower protozoa, and higher fungi zoospores. In addition, higher rumen ammonia nitrogen (NH4-N) and higher pH have been found as compared to those in cattle
ECOLOGY AND BEHAVIOR
River buffalo prefer deep water. Swamp buffalo prefer to wallow in mudholes which they make with their horns. During wallowing, they acquire a thick coating of mud. Both are well adapted to a hot and humid climate with temperatures ranging from 0 °C in the winter to 30 °C and greater in the summer. Water availability is important in hot climates, since they need wallows, rivers, or splashing water to assist in thermoregulation. Some breeds are adapted to saline seaside shores and saline sandy terrain.
DIET
Water buffalo thrive on many aquatic plants and during floods, will graze submerged, raising their heads above the water and carrying quantities of edible plants. They eat reeds (quassab), a giant reed (birdi), a kind of bulrush (kaulan), water hyacinth, and marsh grasses. Some of these plants are of great value to local peoples. Others, such as water hyacinth, are a major problem in some tropical valleys, and water buffalo may help to keep waterways clear.
Green fodders are used widely for intensive milk production and for fattening. Many fodder crops are conserved as hay, chaffed, or pulped. Fodders include alfalfa, berseem and bancheri, the leaves, stems or trimmings of banana, cassava, fodder beet, halfa, ipil-ipil and kenaf, maize, oats, pandarus, peanut, sorghum, soybean, sugarcane, bagasse, and turnips. Citrus pulp and pineapple wastes have been fed safely to buffalo. In Egypt, whole sun-dried dates are fed to milk-buffalo up to 25% of the standard feed mixture.
REPRODUCTION
Swamp buffalo generally become reproductive at an older age than river breeds. Young males in Egypt, India, and Pakistan are first mated at about 3.0–3.5 years of age, but in Italy
they may be used as early as 2 years of age. Successful mating behaviour may continue until the animal is 12 years or even older. A good river male can impregnate 100 females in a year. A strong seasonal influence on mating occurs. Heat stress reduces libido
Although buffalo are polyoestrous, their reproductive efficiency shows wide variation throughout the year. Buffalo cows exhibit a distinct seasonal change in displaying oestrus, conception rate, and calving rate. The age at first oestrus of heifers varies between breeds from 13–33 months, but mating at the first oestrus is often infertile and usually deferred until they are 3 years old. Gestation lasts from 281–334 days, but most reports give a range between 300 and 320 days. Swamp buffalo carry their calves for one or two weeks longer than river buffalo. It is not rare to find buffalo that continue to work well at the age of 30, and instances of a working life of 40 years are recorded.
TAXONOMIC HISTORY
Carl Linnaeus first described the genus Bos and the water buffalo under the binomial Bubalis bubalus in 1758; the latter was known to occur in Asia and as a domestic form in Italy. Ellerman and Morrison-Scott treated the wild and domestic forms of the water buffalo as conspecifics whereas others treated them as different species. The nomenclatorial treatment of wild and domestic forms has been inconsistent and varies between authors and even within the works of single authors.
In March 2003, the International Commission on Zoological Nomenclature achieved consistency in the naming of wild and domestic water buffalo by ruling that the scientific name Bubalus arnee is valid for the wild form. B. bubalis continues to be valid for the domestic form and applies also to feral populations.
DOMESTICATION AND BREEDING
Water buffalo were domesticated in India about 5000 years ago, and in China about 4000 years ago. Two types are recognized, based on morphological and behavioural criteria – the river buffalo of the Indian subcontinent and further west to the Balkans and Italy, and the swamp buffalo, found from Assam in the west through Southeast Asia to the Yangtze valley of China in the east. The present-day river buffalo is the result of complex domestication processes involving more than one maternal lineage and a significant maternal gene flow from wild populations after the initial domestication events. Twenty-two breeds of the river type water buffalo are known, including Murrah, Nili-Ravi, Surti, Jafarabadi, Anatolian, Mediterranean, and Egyptian buffalo. China has a huge variety of buffalo genetic resources, comprising 16 local swamp buffalo breeds in various regions.
Results of mitochondrial DNA analyses indicate that the two types were domesticated independently. Sequencing of cytochrome b genes of Bubalus species implies that the domestic buffalo originated from at least two populations, and that the river and the swamp types have differentiated at the full species level. The genetic distance between the two types is so large that a divergence time of about 1.7 million years has been suggested. The swamp type was noticed to have the closest relationship with the tamaraw.
DISTRIBUTION OF POPULATIONS
The water buffalo population in the world is about 172 million.
IN ASIA
More than 95.8% of the world population of water buffalo are found in Asia including both river and swamp types. The water buffalo population in India numbered over 97.9 million head in 2003, representing 56.5% of the world population. They are primarily of the river type, with 10 well-defined breeds comprising Badhawari, Murrah, Nili-Ravi, Jafarabadi, Marathwada, Mehsana, Nagpuri, Pandharpuri, Toda, and Surti. Swamp buffalo occur only in small areas in the north-eastern part of the country and are not distinguished into breeds.
In 2003, the second-largest population lived in China, with 22.759 million head, all of the swamp type with breeds kept only in the lowlands, and other breeds kept only in the mountains; as of 2003, 3.2 million swamp-type carabao buffalo were in the Philippines, nearly three million swamp buffalo were in Vietnam, and 772,764 buffalo were in Bangladesh. About 750,000 head were estimated in Sri Lanka in 1997.
The water buffalo is the main dairy animal in Pakistan, with 23.47 million head in 2010. Of these, 76% are kept in the Punjab. The rest of them are mostly in the province of Sindh. Breeds used are Nili-Ravi, Kundi, and Azi Kheli. Karachi has the largest population of water buffalos for an area where fodder is not grown, consisting of 350,000 head kept mainly for milking.
In Thailand, the number of water buffalo dropped from more than 3 million head in 1996 to less than 1.24 million head in 2011. Slightly over 75% of them are kept in the country's northeastern region. The statistics also indicate that by the beginning of 2012, less than one million were in the country, partly as a result of illegal shipments to neighboring countries where sales prices are higher than in Thailand.
Water buffalo are also present in the southern region of Iraq, in the marshes. These marshes were drained by Saddam Hussein in 1991 in an attempt to punish the south for the uprisings of 1991. Following 2003, and the fall of the Saddam regime, these lands were reflooded and a 2007 report in the provinces of Maysan and Thi Qar shows a steady increase in the number of water buffalo. The report puts the number at 40,008 head in those two provinces.
IN EUROPE AND THE MEDITERRANEAN
Water buffalo likely were introduced to Europe from India or other Oriental countries. To Italy they were introduced about the year 600 in the reign of the Longobard King Agilulf. As they appear in the company of wild horses, they probably were a present from the Khan of the Avars, a Turkic nomadic tribe that dwelt near the Danube River at the time. Sir H. Johnston knew of a herd of water buffalo presented by a King of Naples to the Bey of Tunis in the mid-19th century that had resumed the feral state in northern Tunis.
European buffalo are all of the river type and considered to be of the same breed named Mediterranean buffalo. In Italy, the Mediterranean type was particularly selected and is called Mediterranean Italian breed to distinguish it from other European breeds, which differ genetically. Mediterranean buffalo are also found in Romania, Bulgaria, Greece, Albania, Kosovo, and the Republic of Macedonia, with a few hundred in the United Kingdom, Germany, the Netherlands, Switzerland, and Hungary. Little exchange of breeding buffalo has occurred among countries, so each population has its own phenotypic features and performances. In Bulgaria, they were crossbred with the Indian Murrah breed, and in Romania, some were crossbred with Bulgarian Murrah. Populations in Turkey are of the Anatolian buffalo breed.
IN AUSTRALIA
Between 1824 and 1849, water buffalo were introduced into the Northern Territory from Timor, Kisar, and probably other islands in the Indonesian archipelago. In 1886, a few milking types were brought from India to Darwin. They have been the main grazing animals on the subcoastal plains and river basins between Darwin and Arnhem Land since the 1880s. In the early 1960s, an estimated population of 150,000 to 200,000 buffalo were living in the plains and nearby areas.
They became feral and are causing significant environmental damage. Buffalo are also found in the Top End. As a result, they were hunted in the Top End from 1885 until 1980. The commencement of the brucellosis and tuberculosis campaign (BTEC) resulted in a huge culling program to reduce buffalo herds to a fraction of the numbers that were reached in the 1980s. The BTEC was finished when the Northern Territory was declared free of the disease in 1997. Numbers dropped dramatically as a result of the campaign, but have since recovered to an estimated 150,000 animals across northern Australia in 2008.
During the 1950s, buffalo were hunted for their skins and meat, which was exported and used in the local trade. In the late 1970s, live exports were made to Cuba and continued later into other countries. Buffalo are now crossed with riverine buffalo in artificial insemination programs, and may be found in many areas of Australia. Some of these crossbreds are used for milk production. Melville Island is a popular hunting location, where a steady population up to 4,000 individuals exists. Safari outfits are run from Darwin to Melville Island and other locations in the Top End, often with the use of bush pilots. The horns, which can measure up to a record of 3.1 m tip-to-tip, are prized hunting trophies.
The buffalo have developed a different appearance from the Indonesian buffalo from which they descend. They live mainly in freshwater marshes and billabongs, and their territory range can be quite expansive during the wet season. Their only natural predators in Australia are adult saltwater crocodiles, with whom they share the billabongs, and dingoes, which have been known to prey on buffalo calves and occasionally adult buffalo when the dingoes are in large packs.
Buffalo were exported live to Indonesia until 2011, at a rate of about 3000 per year. After the live export ban that year, the exports dropped to zero, and had not resumed as of June 2013.
IN SOUTH AMERICA
Water buffalo were introduced into the Amazon River basin in 1895. They are now extensively used there for meat and dairy production. In 2005, the buffalo herd in the Brazilian Amazon stood at roughly 1.6 million head, of which 460,000 were located in the lower Amazon floodplain. Breeds used include Mediterranean from Italy, Murrah and Jafarabadi from India, and Carabao from the Philippines.
During the 1970s, small herds were imported to Costa Rica, Ecuador, Cayenne, Panama, Surinam, Guyana, and Venezuela.
In Argentina, many game ranches raise water buffalo for commercial hunting
IN NORTH AMERICA
In 1974, four water buffalo were imported to the United States from Guam to be studied at the University of Florida. In February 1978, the first herd arrived for commercial farming. Until 2002, only one commercial breeder was in the United States. Water buffalo meat is imported from Australia. Until 2011, water buffalo were raised in Gainesville, Florida, from young obtained from zoo overflow. They were used primarily for meat production, frequently sold as hamburger.[38] Other US ranchers use them for production of high-quality mozzarella cheese.
HUSBANDRY
The husbandry system of water buffalo depends on the purpose for which they are bred and maintained. Most of them are kept by people who work on small farms in family units. Their buffalo live in very close association with them, and are often their greatest capital asset. The women and girls in India generally look after the milking buffalo while the men and boys are concerned with the working animals. Throughout Asia, they are commonly tended by children who are often seen leading or riding their charges to wallowing places. Water buffalo are the ideal animals for work in the deep mud of paddy fields because of their large hooves and flexible foot joints. They are often referred to as "the living tractor of the East". It probably is possible to plough deeper with buffalo than with either oxen or horses. They are the most efficient and economical means of cultivation of small fields. In most rice-producing countries, they are used for threshing and for transporting the sheaves during the rice harvest. They provide power for oilseed mills, sugarcane presses, and devices for raising water. They are widely used as pack animals, and in India and Pakistan also for heavy haulage. In their invasions of Europe, the Turks used buffalo for hauling heavy battering rams. Their dung is used as a fertilizer, and as a fuel when dried.
Buffalo contribute 72 million tones of milk and three million tones of meat annually to world food, much of it in areas that are prone to nutritional imbalances. In India, river-type buffalo are kept mainly for milk production and for transport, whereas swamp-type buffalo are kept mainly for work and a small amount of milk.
DAIRY PRODUCTS
Water buffalo milk presents physicochemical features different from that of other ruminant species, such as a higher content of fatty acids and proteins. The physical and chemical parameters of swamp and river type water buffalo milk differ. Water buffalo milk contains higher levels of total solids, crude protein, fat, calcium, and phosphorus, and slightly higher content of lactose compared with those of cow milk. The high level of total solids makes water buffalo milk ideal for processing into value-added dairy products such as cheese. The conjugated linoleic acid (CLA) content in milk ranged from 4.4 mg/g fat in September to 7.6 mg/g fat in June. Seasons and genetics may play a role in variation of CLA level and changes in gross composition of the water buffalo milk.
Water buffalo milk is processed into a large variety of dairy products:
- Cream churns much faster at higher fat levels and gives higher overrun than cow cream.
- Butter from water buffalo cream displays more stability than that from cow cream.
- Ghee from water buffalo milk has a different texture with a bigger grain size than ghee from cow milk.
- Heat-concentrated milk products in the Indian subcontinent include paneer, khoa, rabri, kheer and basundi.
- Fermented milk products include dahi, yogurt, and chakka.
- Whey is used for making ricotta and mascarpone in Italy, and alkarish in Syria and Egypt.
- Soft cheeses made include mozzarella in Italy, karish, mish, and domiati in Egypt, madhfor in Iraq, alghab in Syria, kesong puti in the Philippines, and vladeasa in Romania.
- The semihard cheese beyaz peynir is made in Turkey.
- Hard cheeses include braila in Romania, rahss in Egypt, white brine in Bulgaria, and akkawi in Syria.
- Watered-down buffalo milk is used as a cheaper alternative to regular milk.
MEAT AND SKIN PRODUCTS
Water buffalo meat, sometimes called "carabeef", is often passed off as beef in certain regions, and is also a major source of export revenue for India. In many Asian regions, buffalo meat is less preferred due to its toughness; however, recipes have evolved (rendang, for example) where the slow cooking process and spices not only make the meat palatable, but also preserve it, an important factor in hot climates where refrigeration is not always available.Their hides provide tough and useful leather, often used for shoes.
BONE AND HORN PRODUCTS
The bones and horns are often made into jewellery, especially earrings. Horns are used for the embouchure of musical instruments, such as ney and kaval.
ENVIRONMENTAL EFFECTS
Wildlife conservation scientists have started to recommend and use introduced populations of feral domestic water buffalo in far-away lands to manage uncontrolled vegetation growth in and around natural wetlands. Introduced water buffalo at home in such environs provide cheap service by regularly grazing the uncontrolled vegetation and opening up clogged water bodies for waterfowl, wetland birds, and other wildlife. Grazing water buffalo are sometimes used in Great Britain for conservation grazing, such as in Chippenham Fen National Nature Reserve. The buffalo can better adapt to wet conditions and poor-quality vegetation than cattle.
Currently, research is being conducted at the Lyle Center for Regenerative Studies to determine the levels of nutrients removed and returned to wetlands when water buffalo are used for wetland vegetation management.
However, in uncontrolled circumstances, water buffalo can cause environmental damage, such as trampling vegetation, disturbing bird and reptile nesting sites, and spreading exotic weeds.
RESEARCH
The world's first cloned buffalo was developed by Indian scientists from National Dairy Research Institute, Karnal. The buffalo calf was named Samrupa. The calf did not survive more than a week, and died due to some genetic disorders. So, the scientists created another cloned buffalo a few months later, and named it Garima.
On 15 September 2007, the Philippines announced its development of Southeast Asia's first cloned buffalo. The Philippine Council for Agriculture, Forestry and Natural Resources Research and Development (PCARRD), under the Department of Science and Technology in Los Baños, Laguna, approved this project. The Department of Agriculture's Philippine Carabao Center (PCC) will implement cloning through somatic cell nuclear transfer as a tool for genetic improvement in water buffalo. "Super buffalo calves" will be produced. There will be no modification or alteration of the genetic materials, as in genetically modified organisms.
On 1 January 2008, the Philippine Carabao Center in Nueva Ecija, per Filipino scientists, initiated a study to breed a super water buffalo that could produce 4 to 18 litres of milk per day using gene-based technology. Also, the first in vitro river buffalo was born there in 2004 from an in vitro-produced, vitrified embryo, named "Glory" after President Gloria Macapagal-Arroyo. Joseph Estrada's most successful project as an opposition senator, the PCC was created through Republic Act 3707, the Carabao Act of 1992.
IN CULTURE
Some ethnic groups, such as Batak and Toraja in Indonesia and the Derung in China, use water buffalo or kerbau (called horbo in Batak or tedong in Toraja) as sacrificial animals at several festivals.
- Legend has it that the Chinese philosophical sage Laozi left China through the Han Gu Pass riding a water buffalo.
- According to Hindu lore, the god of death Yama, rides on a male water buffalo.
- The carabao subspecies is considered a national symbol in the Philippines.
- In Vietnam, water buffalo are often the most valuable possession of poor farmers: "Con trâu là đầu cơ nghiệp". They are treated as a member of the family: "Chồng cày, vợ cấy, con trâu đi bừa" ("The husband ploughs, the wife sows, water buffalo draws the rake") and are friends of the children. Children talk to their water buffalo, "Bao giờ cây lúa còn bông. Thì còn ngọn cỏ ngoài đồng trâu ăn." (Vietnamese children are responsible for grazing water buffalo. They feed them grass if they work laboriously for men.) In the old days, West Lake, Hà Nội, was named Kim Ngưu - Golden Water Buffalo.
- The Yoruban Orisha Oya (goddess of change) takes the form of a water buffalo.
FIGHTING FESTIVALS
- Pasungay Festival is held annually in the town of San Joaquin, Iloilo in the Philippines.
- Moh juj Water Buffalo fighting, is held every year in Bhogali Bihu in Assam. Ahotguri in Nagaon is famous for it.
- Do Son Water Buffalo Fighting Festival of Vietnam, held each year on the ninth day of the eighth month of the lunar calendar at Do Son Township, Haiphong City in Vietnam, is one of the most popular Vietnam festivals and events in Haiphong City. The preparations for this buffalo fighting festival begin from the two to three months earlier. The competing buffalo are selected and methodically trained months in advance. It is a traditional festival of Vietnam attached to a Water God worshipping ceremony and the Hien Sinh custom to show martial spirit of the local people of Do Son, Haiphong.
- "Hai Luu" Water Buffalo Fighting Festival of Vietnam, According to ancient records, the buffalo fighting in Hai Luu Commune has existed from the 2nd century B.C. General Lu Gia at that time, had the buffalo slaughtered to give a feast to the local people and the warriors, and organized buffalo fighting for amusement. Eventually, all the fighting buffalo will be slaughtered as tributes to the deities.
- "Ko Samui" Water Buffalo Fighting Festival of Thailand, is a very popular event held on special occasions such as New Year's Day in January, and Songkran in mid-April, this festival features head-wrestling bouts in which two male Asian water buffalo are pitted against one another. Unlike in Spanish Bullfighting, wherein bulls get killed while fighting sword-wielding men, Buffalo Fighting Festival held at Ko Samui, Thailand is fairly harmless contest. The fighting season varies according to ancient customs & ceremonies. The first Buffalo to turn and run away is considered the loser, the winning buffalo becomes worth several million baht. Ko Samui is an island in the Gulf of Thailand in the South China Sea, it is 700 km from Bangkok and is connected to it by regular flights.
- "Ma'Pasilaga Tedong" Water Buffalo Fighting Festival, in Tana Toraja Regency of Sulawesi Island, Indonesia, is a very popular event where the Rambu Solo' or a Burial Festival took place in Tana Toraja.
RACING FESTIVALS
Carabao Carroza Festival is being held annually every May in the town of Pavia, Iloilo, Philippines.
Kambala races of Karnataka, India, take place between December and March. The races are conducted by having the water buffalo (he buffalo) run in long parallel slushy ditches, where they are driven by men standing on wooden planks drawn by the buffalo. The objectives of the race are to finish first and to raise the water to the greatest height and also a rural sport. Kambala races are arranged with competition, as well as without competition and as a part of thanks giving (to god) in about 50 villages of coastal Karnataka.
In the Chonburi Province of Thailand, and in Pakistan, there are annual water buffalo races.
Chon Buri Water buffalo racing festival, Thailand In downtown Chonburi, 70 km south of Bangkok, at the annual water buffalo festival held in mid-October. About 300 buffalo race in groups of five or six, spurred on by bareback jockeys wielding wooden sticks, as hundreds of spectators cheer. The water buffalo has always played an important role in agriculture in Thailand. For farmers of Chon Buri Province, near Bangkok, it is an important annual festival, beginning in mid-October. It is also a celebration among rice farmers before the rice harvest. At dawn, farmers walk their buffalo through surrounding rice fields, splashing them with water to keep them cool before leading them to the race field. This amazing festival started over a hundred years ago when two men arguing about whose buffalo was the fastest ended up having a race between them. That’s how it became a tradition and gradually a social event for farmers who gathered from around the country in Chonburi to trade their goods. The festival also helps a great deal in preserving the number of buffalo, which have been dwindling at quite an alarming rate in other regions. Modern machinery is rapidly replacing buffalo in Thai agriculture. With most of the farm work mechanized, the buffalo-racing tradition has continued. Racing buffalo are now raised just to race; they do not work at all. The few farm buffalo which still do work are much bigger than the racers because of the strenuous work they perform. Farm buffalo are in the "Buffalo Beauty Pageant", a Miss Farmer beauty contest and a comic buffalo costume contest etc.. This festival perfectly exemplifies a favored Thai attitude to life — "sanuk," meaning fun.
Babulang Water buffalo racing festival, Sarawak, Malaysia, is the largest or grandest of the many rituals, ceremonies and festivals of the traditional Bisaya (Borneo) community of Limbang, Sarawak. Highlights are the Ratu Babulang competition and the Water buffalo races which can only be found in this town in Sarawak, Malaysia.
Vihear Suor village Water buffalo racing festival, in Cambodia, each year, people visit Buddhist temples across the country to honor their deceased loved ones during a 15-day period commonly known as the Festival of the Dead but in Vihear Suor village, about 35 km northeast of Cambodia, citizens each year wrap up the festival with a water buffalo race to entertain visitors and honour a pledge made hundreds of years ago. There was a time when many village cattle which provide rural Cambodians with muscle power to plough their fields and transport agricultural products died from an unknown disease. The villagers prayed to a spirit to help save their animals from the disease and promised to show their gratitude by holding a buffalo race each year on the last day of "P'chum Ben" festival as it is known in Cambodian. The race draws hundreds of spectators who come to see riders and their animals charge down the racing field, the racers bouncing up and down on the backs of their buffalo, whose horns were draped with colorful cloth.
Pothu puttu matsaram, Kerala, South India, is similar to Kambala races.
WIKIPEDIA
Midtown Manhattan, New York City, New York, United States
The ground floor and mezzanine floor interior of the RCA Building, built in 1931-33, is one of the major components of What is the largest and most important buildings constructed at Rockefeller Center. As the RCA Building in its form and siting is the focus of the major east-west axis running through the Center from Fifth to Sixth Avenues, so is its ground floor and mezzanine floor interior an important continuation of that axis. The double-height entrance lobby symbolically welcomes visitors, drawing them from the Rockefeller Plaza entrance, past the information desk, into corridors flanked by shops, which create the sense of a grand concourse, and leading to six elevator banks with high-speed elevators which efficiently carry tenants and visitors up into the 70-story building. The experience of the visitor to the ground floor and mezzanine floor interior is enhanced by the extensive program of murals, executed by Jose Maria Sert and Frank Brangwyn, which were conceived as an intrinsic part of the building and a continuation of the overall art scheme used on the exteriors of the Rockefeller Center buildings.
The RCA Building and Rockefeller Center
Rockefeller Center is one of the most important architectural projects ever undertaken in America. It was unprecedented in scope, near visionary in its urban planning and unequalled for its harmonious integration of architecture, art and landscaping. The complex grew out of an ill-fated plan to build new midtown quarters for the Metropolitan Opera Company. When the original scheme collapsed, the project was transformed into the private commercial enterprise of John D. Rockefeller, Jr. Construction of the original complex began in 1931 and ended with the completion of the fourteenth building in 1939.
John D. Rockefeller, Jr. (1874-1960) was born in Cleveland, Ohio. After graduating from Brown University in 1897 he joined his father's office and for some years held directorships of such businesses as the Standard Oil Company of New Jersey, United States Steel Corporation and Missouri Pacific Railroad among others. By about 1911, however, Rockefeller had become almost totally involved with philanthropic, civic, educational and religious enterprises such as the Rockefeller Institute for Medical Research, the Rockefeller Foundation, Rockefeller Sanitary Commission and International Education Board to name a few only. A devout Baptist, he also founded the Institute for Social and Religious Research and funded construction of Riverside Church (1927-30). The latter was just one of the many architectural undertakings which Rockefeller sponsored.
He also funded the restoration of the palaces at Fontainebleau and Versailles and Reims Cathedral in France, the Agora and Stoa of Attolos in Athens, and in America, Washington Irving's "Sunnyside" heme, Colonial Williamsburg and the birthplace of George Washington. He also supplied the land for the Museum of Modem Art, for the Rockefeller Institute and Fort Tryon where he built the Cloisters. later, in 1946, Rockefeller donated land for the construction of the United Nations along the East River and gave generously to Lincoln Center for the Performing Arts. Although never an opera devotee, he supported the Metropolitan Opera project as just one more worthy civic and cultural cause.
Rockefeller's involvement in the project to relocate the Metropolitan Opera began on May 21, 1928, when Benjamin Morris presented the scheme to potential investors during a dinner at the Metropolitan Club. Among the guests was Ivy Lee, Rockefeller's public relations manager. He recommended the proposal to his employer, noting that it would "make the [Opera] Square and the immediate surroundings the most valuable shopping district in the world." Rockefeller was interested. He, his sister and father lived in three large houses on W. 53rd and 54th Streets (just three blocks north of the proposed Opera site) and owned a good deal of real estate in the area. Development of a cultural center would insure the quality of his neighborhood while increasing the value of his speculative properties. But before making any commitment, Rockefeller sought development advice from prominent real estate advisors, the Todd, Robertson & Todd Engineering Corp. among them.
John Reynard Todd (1867-1945) was a lawyer who, in partnership with Henry Clay Irons, became accidentally involved in construction and rentals. Todd & Irons developed their building activities into a lucrative business through which they erected and sold at large profits numerous hotels, apartments and commercial structures. Among them was the Cunard Building whose lobby was designed by Benjamin Morris and which stood directly across the street from Rockefeller's Standard Oil Building at 26 Broadway. When Irons retired in 1919 Todd went into partnership with his physician brother, Dr. James M. Todd (c. 1870-1939), and Hugh S. Robertson (1880-1951), a specialist in real estate and financial management. Together they were responsible for the internal planning, construction and rental of the Ritz and Barclay Hotels, Postum Building and the fabulously successful Graybar Building which they linked to Grand Central Terminal with corridors.
John R. Todd was the personal friend of Thomas M. Debevoise and Charles O. Heydt, Rockefeller's legal and real estate advisors and it was due to them that he became involved in the Opera project. It was through Debevoise that Todd's son Webster (in the engineering firm of Todd & [Joseph O.] Brown) was engaged in Rockefeller's restoration of Colonial Williamsburg in 1928. And through Heydt that Todd, his brother and Robertson were hired to develop Rockefeller's midtown complex. Heydt informed Rockefeller that Todd had been involved "in very large enterprises, [had] architects in his own office, and--[had] never made a failure. He [understood] thoroughly the matter of financing the construction of large buildings...and would be in a position to help prospective tenants...construct their own buildings." Todd, he said, was "a hard-headed business man."Todd, Robertson & Todd was one of five real estate firms to advise Rockefeller on the development potential of the Opera project in autumn, 1928.
In addition to the Opera and its plaza (to be designed by Benjamin Morris), the firm recommended a remarkably progressive mixed use complex including hotels, apartment and office buildings, a shopping arcade and department store (the latter in continuation of the development of Fifth Avenue with such fashionable counterparts as Saks and Altmans). The plan also included two new private streets and a lower level for vehicular traffic, parking and freight deliveries. The scheme was prepared over Labor Day weekend, 1928 by two little known, 38 year old architects on Todd's staff: L. Andrew Reinhard and Hairy Hofmeister.
Under Todd's directive, Reinhard & Hofmeister prepared an improved plan in mid-September, 1928. Two weeks later (October 1, 1928) Rockefeller made a commitment to lease from Columbia College the three blocks between 48th-51st Streets. The land stretched west from Fifth Avenue but stopped short of Sixth Avenue where street frontage was privately owned. (In subsequent years Rockefeller acquired the western lots as well). The Columbia contract was not actually signed until December 31, 1928, at which point Rockefeller agreed to pay approximately $3.5 million annual rent during 1928-1952 with options for three 21-year renewals.
On October 1, 1929 (precisely a year after Rockefeller agreed to lease the Columbia property) Todd, Robertson & Todd were appointed managers of the project. Their mandate was to "build the thing, put it on a profitable basis, and sell it to the world." By the end of October their staff architects (Reinhard & Hofmeister) were named architects of the development. They were experienced in the internal layouts preferred by Todd and familiar with his theory that "business property income production supercedes pure aesthetics." Todd recommended at the same time that Harvey Corbett and Benjamin Morris be engaged as consulting architects (although the latter declined after December, 1929). He also suggested employment of Raymond Hood, the man of ideas whose reputation as a leading skyscraper designer had skyrocketed in recent years.
Todd selected architects "who would be primarily interested in good planning, utility, cost, income, low operating expenses and progress...[men who were not too] committed to the architectural past [nor] too much interested in wild modemism."[6] The pooling of eight different talents from three different firms allowed for a division of labor and for an undertaking too large for most private offices of the day. Architecture by committee modified the singular dominance of any one personality, but also seems to have generated competition and controversy. The situation was resolved in February 1930, when the architects united in a collective known as the Associated Architects. Thereafter all drawings bear the three firm names in strict alphabetical order: Corbett, Harrison & MacMurray; Hood, Godley (until 1931) & Fouilhoux; Reinhard & Hofineister.
The Associated Architects
Corbett, Harrison & MacMurray
Harvey Wiley Corbett (1873-1954) was born to physician parents in San Francisco, California. He was educated at the University of California (1895), the Ecole des Beaux Arts in Paris (1906) and the atelier of the historistic Jean Louis Pascal. Between 1903 and 1912 he was in partnership with F. Livingston Pell and between 1912 and 1928 with Frank J. Helmle. While a lecturer at the School of Architecture of Columbia University (1907-11, 1920-35), Corbett trained many students in the "Atelier Colurttoia," which was modeled after the system of the Ecole des Beaux Arts. One of Corbett's major works was the Bush Terminal Building on W. 42nd Street (1923) which established his reputation as a practitioner of "modern" architecture. Its success led Irwin Bush to commission from Corbett designs for the $10,000,000 Bush House in London. Dedicated to "the friendship to English speaking peoples," this American-English center was to find its counterpart in the British Empire Building at Rockefeller Center.
Corbett was an early and strong advocate of the skyscraper as an urban building form and wrote and lectured extensively in support of this concept. He was a practical architect who envisioned the future city with super-block skyscrapers, tiered streets and multi-level transportation systems. Corbett had a reputation as a skilled planner who worked within budget while remaining aware of the city scape and urban design. He acted as a consultant to the Regional Plan Association and served on the architectural planning committees for the 1933 Chicago Century of Progress Exposition (beginning in 1929) and the 1939 New York World's Fair.
Corbett was a fellow of both the American Institute of Architects and the Royal Institute of British Architects and received honorary degrees from the University of California, the University of Liverpool and Columbia University. He was a member of the Fine Arts Commission of the State of New York and served as president of the Architectural League of New York and the National Arts Society.
Corbett submitted his "Symposium" design after the retirement of Frank Helmle in 1928 and his establishment of a new partnership with William MacMurray and Wallace Harrison. Together they designed the Roerich Museum and Master Apartments on Riverside Drive in New York and the Horace Bushnell Memorial Hall in Hartford, Connecticut. Because of the latter experience in theater design and because of Corbett*s formidable reputation, the Rockefeller developers were anxious to secure the firm's expertise.
William H. MacMurray (1868-1941) became associated with Corbett same time before 1927. His prime concern was the partnership's business affairs. He had little to do with the design of the Rockefeller Center project. Wallace K. Harrison (1895-1982), by contrast, was very much involved in matters of design and after the death of Raymond Hood in 1934 he exerted an increasingly strong influence on Rockefeller Center's architectural form. He was also responsible for one of the Center's new buildings on the west side of Sixth Avenue.
Harrison was born to a foundry superintendent in Worcester, Massachusetts. He quit school at 14 to take a $5.00/wk job as an office boy with the contracting firm of O.W. Norcross, simultaneously attending Worcester Polytechnic Institute. In 1915 he became a draftsman in the New York office of McKim, Mead & White and attended evening classes at the atelier of Harvey Corbett. In 1917 Harrison enrolled in the Ecole des Beaux Arts. He then returned briefly to McKim, Mead & White before winning a Rotch Traveling Scholarship and a year at the American Academy in Rome. Upon his return to New York in 1922 Harrison became a draftsman for Bertram Goodhue who was then engaged on the Nebraska State Capitol. In 1926 Harrison married Ellen Milton whose brother was the son-in-law of John D. Rockefeller, Jr. and in the following year, joined in partnership with Corbett, Helmle (soon to retire) and MacMurray.
In 1935 Harrison left Corbett's office and formed a partnership with J. Andre Fouilhoux who had worked with Raymond Hood until the latter's death in 1934. Six years later Max Abramowitz (1908-1959) was taken on as a partner. When Fouilhoux died in 1945 the firm survived as Harrison & Abramowitz and went on to become one of the most successful postwar architectural concerns in America. Included among its works are parts of Lincoln Center for the Performing Arts, Nelson Rockefeller's Empire State Plaza in Albany and the United Nations (for which Rockefeller donated the land in 1946). In 1967 Harrison was awarded the gold medal of the American Institute of Architects for his "demonstrated ability to lead a team in producing significant architectural works of high quality over a period of more than 30 years." Hood, Godley & Fouilhoux.
Raymond Mathewson Hood (1881-1934) was born in Pawtucket, Rhode Island. He studied at Brown University before transferring to the Massachusetts Institute of Technology in 1900 and later, the Ecole des Beaux Arts in Paris (1905, 1908-10). As a draftsman he was employed in the offices of Cram, Goodhue & Ferguson, Boston; Palmer, Hornbostel & Jones, New York; and Henry Hornbostel, Pittsburgh. He set up his own office in New York in 1914, but did not achieve any great architectural success until 1922. In that year John Mead Howell asked Hood to join him in submitting a design for the Chicago Tribune competition. Their winning scheme was a soaring tower terminating in setback peaks and flying buttresses of neo-Gothic design, distinguished by its logical plan and clarity of design.
The competition established Hood's reputation as a skyscraper designer and brought his firm several notable commissions: the American Radiator Building, Daily News Building and the McGraw Hill Building, all in New York City, and all in the years immediately preceding Rockefeller's development. Hood was also associated with Harvey Corbett on plans for the Chicago Century of Progress Exposition of 1933.[10] His good working relationship with Corbett, together with Hood's originality and the publicity generated by his previous skyscraper designs, were positive factors in his selection for the new complex. Before his premature death in 1934, Hood played a dominant role in the design of Rockefeller Center. He was responsible for the introduction of building setbacks and rooftop gardens, the establishment of uniformly low-rise elevations along Fifth Avenue and significantly, the suggestion to bring the radio industry to the Center.
Hood was a fellow of the American Institute of Architects, a president of the Architectural League of New York, and a trustee of the Beaux Arts Institute of Design. He received the Medal of Honor of the Architectural League in 1926, and in 1940 was posthumously awarded a gold medal from the New York Chapter of the AIA.
Hood brought to the Center Godley and Fouilhoux, his partners since the mid 1920s. Frederick A. Godley (1887-1961) received his B.A. from Yale University (1908), an M.A. from the Massachusetts Institute of Technology (1910) and a diploma of architecture from the Ecole des Beaux Arts (1913). After working in the Boston architectural office of Guy Lowell, he established his own firm in 1915 (Godley & Haskell, 1913-18; Godley & Sedgwick, 1918-24). In 1924 he joined Raymond Hood in the firm of Hood, Godley & Fouilhoux, specializing in the business affairs of the office. He left the firm in 1931, while the Rockefeller Center project was underway, to join the faculty of the Yale University School of Architecture, where he taught until 1947. Godley was also a fellow of the American Institute of Architects and chairman of the educational committee of the Beaux Arts Institute of Design.
Jacques Andre Fouilhoux (1879-1945), a Paris-born engineer, received his training at the Ecole Centrale des Arts et Manufactures. Emigrating to the United States in 1904, he established the firm of Fouilhoux & Whiteside in Port 1 and, Oregon in 1908. He later worked for Albert Kahn, noted industrial architect, in Detroit, among others. After World War I Fouilhoux moved to New York where he formed a partnership with Raymond Hood in 1927. Following Hood's death, Fouilhoux became partners with Wallace K. Harrison (formerly of Corbett, Harrison & MacMurray) and together they continued to be involved with Rockefeller Center. With their new partner Max Abramowitz they designed the Rockefeller Apartments, general plans, major buildings, Trylon and Perisphere for the New York World's Fair of 1939. In collaboration with others Fouilhoux designed the Fort Greene and Clinton Hill housing projects in Brooklyn.
He fell to his death from one of their roofs in 1945. Fouilhoux was a fellow of the American Institute of Arch tects and served as treasurer of the Beaux-Arts Institute of Design. Reinhard Hofmeister I. Andrew Reinhard (1891-1964) was the son of a carpenter-cabinet maker who, at age 14, became an office boy for Benjamin Morris (the architect initially commissioned to design the new Opera). Reinhard then studied at the Mechanics Institute in New York and finished his formal education at the Beaux-Arts Society of Design. He then returned to Morris' firm as a junior designer and worked in other prominent offices, notably that of Raymond Hood (who would later make some of the greatest contributions to Rockefeller Center). Reinhard then spent eight years with Todd, Robertson & Todd during which time he and Hofmeister worked en rentals and interior layouts for the Graybar Building. In 1928 Reinhard & Hofmeister formed a partnership.
Henry Hofmeister (1891-1962) was a self-trained architect who, after only two years of high school, joined the firm of Warren & Wetmore. He worked there for 17 years before joining Todd, Robertson & Todd. Hofmeister acquired a reputation for being methodical and having a good knowledge of such practical matters as plumbing, ventilation and efficient interior layouts. He organized the Rockefeller Center architectural office and supervised the preparation of the necessary architectural drawings. He was, according to Reinhard, "the man who got the work out." Following the completion of Rockefeller Center, the partners received gold medals for their work from the Architectural league of New York and the Fifth Avenue Association.
Other works later executed by Reinhard & Hofmeister include the World's Fair Hall of Music of 1939 (which has many spatial similarities to Radio City Music Hall); the Federal Building at John F. Kennedy International Airport; the Chrysler Building East; buildings for the New York Medical College; Chase Manhattan Bank; the Italian, Swedish and Waterman steamship lines? the Dun and Bradstreet home office building in New York; the surgical building and research center of the New England Medical Center in Boston? the Deeds Carillon Tower in Dayton, Ohio; and the World War II American cemetery chapel at Neuville en Condroz in Belgium. In 1947 the firm expanded as Reinhard, Hoftneister & Walquist, but dissolved upon Reinhard's retirement in 1956.
Reinhard was a member of the National Commission of Fine Arts in Washington in 1945-50, a fellow of the American Institute of Architects, and served as an officer of the New York Chapter of the AIA, the Architectural league and Municipal Art Society. Hofmeister served as a consultant during World War II to Nelson Rockefeller, then coordinator of Inter--American Affairs with the state Department- He was a member of the American Institute of Architects, the New York Building Congress and the Architectural league of New York, directing the League's program for aiding unemployed or needy architects for a number of years. Shortly before his death, Hofmeister served as a planning consultant on the Lincoln Center project.
Throughout the proceedings Rockefeller had intended to share costs with the Opera and to develop the site with buildings constructed by individual tenants. He never planned to carry the entire lease by himself, nor did he ever consider taking on full responsibility for its architectural development. But finding himself at an annual loss of more than $3,000,000 for the lease of the 12 acres, he boldly proceeded--in the teeth of the Depression--to develop the largest private enterprise ever undertaken in America.
Within one month of the Opera's withdrawal from Rockefeller Center negotiations were underway with the Radio Corporation of America (RCA). A suggestion from Raymond Hood brought the two concerns together. Having recently designed studios at 711 Fifth Avenue for the National Broadcasting Company (NBC), a subsidiary of RCA, Hood was intimately aware of the prodigious expansion of radio and emerging television technology. He correctly foresaw RCA's need for an enlarged center of operations. Architect Wallace Harrison followed up Hood's suggestion with a relative of the chairman of RCA's real estate committee. By February 1930, serious negotiations were underway with the Rockefeller developers. A contract was signed and announced to the press on June 4, 1930.[16]
In its early history the wireless was used almost exclusively for marine telegraphy, and was adopted in 1901 by the U.S. Navy as a substitute for homing pigeons. Its greater potential was not realized until April 12, 1912, when a young David Sarnoff, working in the British Marconi Company's New York branch above Wanamaker's Department Store, intercepted a Morse Code message: the Titanic was "sinking fast." Monitored for days as news-seeking crowds swelled the streets, the calamity served as a tremendous boost to both Marconi and Sarnoft. it also proved the reliability of the wireless and led to speculation about its potential to broadcast sound. Four years later and still employed by Marconi, Sarnoff suggested that radio be used to entertain the nation. Visionary at the time, his idea was not realized until the mid 1920s when post-war prosperity found a radio in nearly every American heme.
The enormous growth of the radio industry and its increasing importance in American culture had led the far sighted Owen D. Young, chairman of General Electric (one of RCA's corporate parents^, to inquire about the possibilities of consolidating RCA's operations in a complex at Rockefeller's development. Corporate reorganization four months later gave RCA independence under its new president David Sarnoff. In partial settlement RCA transferred to G.E. its new office building on 51st Street and Lexington Avenue (Cross & Cross, 1929-30).
The radio group then moved to Rockefeller's development, profoundly altering its character in the process. In replacing the Opera, RCA transformed the complex from an semi-cultural enterprise into a democratic focus for mass entertainment and the corporate headquarters for burgeoning technology. In the words of a contemporary, it substituted "a vision of the future [for] a vision of the past." The impact was such that for years the entire development was popularly, but inaccurately, called "Radio City." The name properly applies only to that part of Rockefeller Center which borders on Sixth Avenue, and which was dominated by RCA and its subsidiaries, the most notable being NBC, Radio-Keith-Orpheum ("RKO," a leading producer, distributor and exhibitor of motion pictures) and RCA Victor (one of the foremost manufacturers of phonographs and records in America). The Sixth Avenue position of the Radio Group was particularly appropriate as it complemented New York's theater district to its immediate southwest.
Although still somewhat speculative in its recent independence--and weathering the Depression with reduced profits --- RCA's new president David Sarnoff made an enormous §4.25 million annual rent commitment to Rockefeller Center. In return RCA was allowed to name the entertainment section of the development as well as its two theaters ("Radio City Music Hall" and the "RKO Roxy (later Center) Theater." It also won exclusive broadcasting rights among the many tenants in the complex and most importantly, the right to display the RCA logo atop its own skyscraper in the heart of the Center (on the site originally intended for the Opera) .
Nearly 300 men began excavation of the RCA Building in July 1931.[21 ] Steelwork commenced early the next year and the building was completed thirteen months later. Its architectural design was the result of several conditioning factors. On the most rudimentary level was the accommodation of varied tenant requirements and the maximum utilization of available land. The solution was the combination of three different buildings into a single structure (more than 1,000 feet long) which spans the full block between Rockefeller Plaza and Sixth Avenue. On the east, taking full advantage of light and air, are the 70-story corporate offices of RCA. Additional office space was provided along Sixth Avenue in the sixteen-story slab of the RCA Building West. The mid block section, much less desirable for office space, was allotted to NBC's broadcasting studios which needed no windows but only large amounts of layered horizontal space.
The technical specifications of this unit were particularly exacting. In order to insure soundproofing all the studios were designed with "floating" walls, floors and ceilings, suspended and insulated from the building's structural frame.
In keeping with his intention to build prime quality business space, developer John R. Todd insisted that no office be more than 27-1/2 feet from a window (the maximum at which natural light and air can be adequately provided). By contrast, many contemporaneous office structures were built to maximum girth leaving dark and unventilated spaces at their cores. The Associated Architects responded to Todd's requirement by grouping high speed elevators into central banks and surrounding them on each floor with a corridor and ring of offices of the required 27-1/2 foot depth. It totally outmoded the wedding cake arrangement where elevators were grouped on either side of a long central corridor, forced deep into the building by the zoning regulations which required towers (and therefore the elevators which serviced those towers) to be set back from the street.
The arrangement at RCA provided more than two million square feet of prime office space, distinguishing it for years as the world's largest office building infloor area.
The plan of the lobby and corridors reflect this scheme, as well, leading from the Rockefeller Plaza entrance, past shops which have both exterior and interior shopfronts, and into the elevator banks.
The Artwork and the Artists
A series of morals, part of Professor Hartley Burr Alexander's overall thematic program for Rockefeller Center, appears to have been part of the interior scheme from the beginning. As early as January 1932, contracts for morals in the RCA Building were rumored. Hood publicly revealed the project in a speech at the Architectural League in February. Despite pressures from groups of American artists, a decision was made to invite artists of international standing to decorate the interior of the RCA Building. On September 2, 1932, John Todd and Raymond Hood set sail for Europe:
The painting of ten panels each of which will be at least 17 by 20 feet will be discussed with the foreign artists, whose names were not disclosed. . . .All the decor-it ions. . < will fir. in the inclusive ornamental theme and will tell in the symbolic language of the arts a connected story.
After being turned down by Henri Matisse and not even making contact with Pablo Picasso, Hood and Todd met success with Jose Maria Sert, Diego Rivera, and Frank Brangwyn. Hood wrote to Rockefeller that Rivera's murals would face the main entrance, Sert's would be on the north wall, and Brangwyn's on the south.[28] The official press announcement described them:
Rivera's mural. . .will show "man at the crossroads looking with uncertainty but with hope and high vision to the choosing of a course leading to a new and better future." Sert's four panels will express man's new mastery over the material universe, through his power, will, imagination, and genius. Brangwyn's pieces will depict man's new relationship to society and his fellow-man his family, his relationships as a worker, as a part of government, and his ethical or religious relationships.
In addition to determining the themes of the murals, the architects had also decided on a color scheme: black, white, and gray on a light background.
Frank Brangwyn (1867-1956) was born in Bruges, Belgium, where his Welch father practiced as a church architect and supplier of ecclesiastical furnishings. His family returned to London in 1875 where the boy was befriended by architect A. H. Mackmurdo. Subsequently Brangwyn worked for two years in the office of William Morris (1882-84), helping to design seme of his wallpapers. He then worked independently and by the turn of the century had specialized in murals. Among his most celebrated works are his murals on the interior of the RCA Building at Rockefeller Center, those for the State Capitol at Jefferson City, Missouri, and the "People, Flora and Fauna of the British Empire" which covers 3000 square feet of the Civic Center in Swansea, Wales. A prolific and versatile artist, Brangwyn designed stained glass, furniture, and other applied arts as well as interiors and street pageants in addition to his work as a muralist, lithographer, etcher, and woodcutter.
Brangwyn established a considerable international reputation and is represented in collections from New York to Prague. He was knighted in 1941, followed eleven years later by the unprecedented honor of a retrospective exhibition in his own lifetime at the Royal Academy, of which Brangwyn had been a member since 1919.
Diego Rivera (1886-1957) was born in Mexico, attending the Acadernia de San Carlos in Mexico City. He studied and worked in Europe from 1907 to 1922, returning to Mexico in 1922 to become one of the founders of the Mexican mural movement. Between 1922 and 1930 he decorated the Anfiteatro Bolivar of the National Preparatory School, the Ministry of Education Building, both in Mexico City, the chapel of the National School of Agriculture at Chapingo, and began work in the Palacio de Cortes at Cuernavaca. Working in. the United States between 1930 and 1934, Rivera created murals for the California School of Fine Arts, the Detroit Institute of Arts, and the RCA Building, the latter—ultimately destroyed— the subject of tremendous controversy. Other notable Mexican work includes murals representing various aspects of Mexican history in the Palacio Nacional (1929-35, 1944-50).
José María Sert (1876-1945) was corn in Barcelona, Spain. Moving to Paris in his early twenties to study art, he spent most of his career there. He held his first American exhibition at the Wildensteiij-Galleries, New York, in the spring of 1924. Primarily known for his work as a muralist, Sert designed murals for the winter homes of Joshua S. Cosden, Edward T. Stotesbury, and Addison Mizner, adorned the north dining room of the Waldorf-Astoria Hotel with a series of murals depicting the marriage of Quiteria in Cervantes' Don Quixote, and decorated the council chambers in the league of Nations building in Geneva (1930). His murals for the RCA Building were carried out between 1933 and 1941, gaining a certain notoriety, because they, in part, replaced the destroyed Diego Rivera mural.
While the choice of foreign artists was controversial, even further controversy was to follow. The artists began working en the murals in late 1932. Rivera objected to the color scheme and the requirement to paint on canvas, and through the intervention of Nelson Rockefeller, John D. Rockefeller, Jr.'s sen, was allowed to paint on the plaster in tempera and to use color. Rivera began work in March 1933; his assistants had previously prepared the wall and paint and were transferring his sketches to the plaster. As the painting took form, its socialist inclinations became obvious. Prominently displayed in the composition were a head of Lenin and workers parading with red flags. Nelson Rockefeller requested the substitution of another face. Rivera suggested a partial change in composition, one which would leave Lenin in place but balanced by an American historical leader; failing that, he wrote "rather than mutilate the conception I should prefer the physical destruction of the conception in its entirety."
On May 9, the Center ordered Rivera to stop work and covered the fresco with canvas. Rivera was paid in full, and on February 9, 1934, the fresco was destroyed and removed, not to be replaced until 1937, by another Sert work.
Sert's initial work for the RCA Building was installed along the north corridor in May 1933. Painted in his Paris studio on canvas, each panel is 25 feet wide by 17 feet high and depicts one aspect of "man's new mastery of the problems of modem civilization." Unlike Rivera, Sert had no intention of making a political statement. He considered mural painting "the complement of architecture. . . .On those walls the moralist puts what is called for. Nothing more, nothing less. . . .Mural painting is an extension of a building's function. It is a part of building, and no muralist must ever forget that."
Brangwyn's work for the south corridor did not arrive until December 1933. Like Sert's work, these are four panels, 25 feet by 17 feet. Brangwyn had no problems with the theme—man's relationship to society—but chose in the final panel to depict the Sermon on the Mount. Doubts were raised by Rockefeller Center officials, perhaps made sensitive by the Lenin controversy, about the depiction of the figure of Christ, suggesting that a light shining down from heaven might suffice. Brangwyn objected, and finally the problem was solved by showing Christ as a hooded figure, his back turned to the spectator, standing against a background of lighted clouds.
Sert's 1937 mural on the west wall of the entrance lobby replaced the disgraced Rivera work, after negotiations with Picasso to fill the space col lapsed. Titled "American Progress, the Triumph of Man's Accomplishments Through Physical and Mental Labor," it completed "the pictorial epic of humanity's struggle begun in the other murals"
Another Sert mural was installed in March 1941 on the ceiling above the Rockefeller Plaza entrance. Entitled "Time" it was put in place after the lobby lighting system was modified to allow for its illumination. Other Sert murals may be seen on the north and south walls of the first elevator bank, representing the spirit of dance and man's triumph in communication, on the north and south stairways to the mezzanine (these are titled "Contest-1940" and "Fraternity of Men") and on the north and south balustrades, representing "Fire" and "Light." These were installed in 1937.
Conception and Design
The design of the lobby of the RCA Building is a continuation of the exterior building design, with its emphasis on form and axis, as well as a major mural program which extends the overall art scheme of Rockefeller Center.
Lobbies of office buildings of this period generally combined two functions: a grand entrance and public space, and a passageway to the elevator system. The Chrysler Building's lobby (1928-30) is a prime example: a highly ornamental triangular-shaped lobby, whose vertex is the entrance and whose base is a wall opening with two sets of elevator banks. The Empire State Building (1930-31) because of its size and layout required a separation of the two functions, with a chapel-like grand entrance space, and a series of corridors leading to the elevators. The RCA Building lobby employs a similar scheme. /
The layout of the lobby floor was in large part dictated by that of the general office floor plans. Because of Todd's requirement that no office be more than 27-1/2 feet from a window, the elevators were placed in central banks and then surrounded with corridors and offices. In the lobby the central core of elevators is flanked by circulation corridors and then by shops opening onto the corridors. Access, too, had to be provided to the NBC Studios in the mid-section of the building. This is accomplished by means of a separate lobby with its own elevator bank. In addition, easy access was required to the underground concourse and the balconies at mezzanine level. Staircases flanking the entrance lobby and within the central core serve this purpose. The manifestation of the long corridors and elevator banks is that of a large public concourse.
An effect of grandeur was sought in the entrance lobby, but because of the service core this occupies a relatively confined area. The architects chose to maximize the effect by creating a double-height space which opens from the Rockefeller Plaza entrance and continues into the corridors through means of mezzanine balconies. These, in turn, allow access to second floor office space. The character of the double-height space is further enhanced by the mural program. The use of rich, elegant materials, such as veined marbles and bronze, and the attention to detail are characteristic of the quality displayed throughout the construction of Rockefeller Center. The details themselves, from shopfronts to indicator signs, from ventilation grilles to elevator doors, are modernistic in design, in keeping with the overall design of the Center.
Description
The interior of the RCA Building consists of two sections: the entrance lobby off Rockefeller Plaza, and the connecting corridors and elevator banks which , with the inner store windows and entrances, create the effect of a grand concourse.
The entrance lobby, opening off Rockefeller Plaza, is a relatively restricted space. On the eastern wall is a the major entrance, and at the west is the information desk, behind which rises Sert's mural of "American Progress." The lower portion of the entrance wall contains six sets of revolving doors and two sets of double-leaf doors of bronze and glass set within a paneled bronze screen which projects slightly into the space. Rising above the doorways is a large screen of cast glass designed by Lee Lawrie- Fifty-five feet long and fifteen feet high, it is molded in high relief and constructed of uniform blocks, 19 by 29 by 3 inches, bonded by vinelite. Flanking the entrance are stairways leading up to the mezzanine and staircases and escalators leading down to the underground concourse. The information desk opposite the doorway is of Champlain gray marble, which is almost black in color, adorned with incised moldings at top and bottom.
Four large piers, faced with reeded ivory marble terminating in a bronze molding, channel traffic through the space. Light fixtures are incorporated into the piers so as to illuminate Sert's mural of '*Time," which spreads out over the entire entrance lobby ceiling. Three figures, representing Past, Present, and Future, are shewn with their feet resting on the tops of the piers. Hour glasses, held by the figures of Past and Future, are being placed on the scales held by the figure of Present. The airplanes in flight are to indicate iron's partial conquest of time and space.
Sert's mural "American Progress" on the wall behind the information desk (which is also the eastern wall of the easternmost elevator bank) depicts America's development through the union of intelligence and strength. On the right are figures of Poetry, Music, and Dance looking upward for inspiration; on the left are men of action, represented by statues of labor. These two groups flank pictures of Ralph Waldo Oner son, the philosopher and thinker, and Abraham Lincoln, as the man of action. In the center background are the towers of Rockefeller Center. This device of depicting the building in lobby art was a favorite with designers of the period, being used in both the Chrysler Building and the Empire State Building.
The lobby opens into corridors flanking the elevator banks, and for the extent of the first five elevator banks and the elevator hallways, this is a double-height space dominated by rows of piers, carrying on the east-west axis, faced with the same ivory marble as that used on the piers in the entrance lobby. The walls are faced with Champlain marble up to the height of the shopfronts and elevator doors, terminating in bronze moldings. Beveled bronze service doors may be seen on the outer walls opposite the piers. Above the marble is a beige plaster surface on the outer vails, while the inner elevator bank walls are adorned with morals which wrap around the corners onto the elevator hallway walls.
The work of Sert is represented by figures hoisting a globe up over scaffolding depicting man's triumph in communications—radio, telephone, and telegraph— on the south wall of the first elevator bank, and figures representing the spirit of the dance on the north wall of the first elevator bank. Sert's first four murals for the RCA Building may be seen on the next four elevator banks facing the north corridor.
In order they are: "The abolition of pain and labor of former ages by the creative intelligence of the machine,'' with human figures and oxen pulling a heavy load with a railroad engine in the background; "The conquests of the pests and epidemics of yesteryear by scientific invention,'' with figures lined. ' up waiting to received inoculations; "The stamping out of tyranny and slavery," with figures of slaves pushing enormous blocks of stone; and "The suppression of war through the combined faculties of man applied to the quest of human happiness," dominated by figures grouped around and emerging from giant cannons.
The four elevator banks on the south corridor display Frank Brangwyn's murals and are meant to be seen in sequence running west to east: "Man laboring painfully with his own hands; living precariously and adventurously with courage, fortitude, and the indomitable will to survive," depicting figures in the wilderness; "Man the creator and master of the tool. Strengthening the foundations and multiplying the comforts of his abiding place," with figures in an arbor cultivating vines; "Man the master and servant of the machine, harnessing to his will the forces of the material world, mechanizing labor and adding these to the promise of leisure," with figures working at a forge; and "Man's ultimate destiny depends not on whether he can learn new lessons or make new discoveries and conquest, but on his acceptance of the lesson taught him close upon two thousand years ago," with figures listening to Christ preaching the Sermon on the Mount.
On the outer walls are a series of shopfronts with doors and windows framed in bronze. In the elevator hallways, the elevator doors are of beveled bronze and are set in bronze reveals. Ventilator grilles, directory boards, indicator signs, elevator indicator signs, and elevator indicator lights in this section are framed in bronze, employing curved, streamlined motifs.
The outer walls rise to mezzanine balconies with hand seme streamlined bronze railings on both the north and south. The stairways leading to the mezzanine flanking the entrance have Champlain marble wainscoting and bronze railings. Adorning the staircases are additional Sert murals: "Contest-1940" with figures of the five races of mankind using the world as a football to compete for global supremacy, at the north, and "Fraternity of Men" with the figures of the five races clasping their hands in brotherhood, at the south. Terminating the double-height corridors, the balconies extend across the ground floor corridors at mezzanine level, and the balcony fronts display Sert murals: "Fire" representing the sun at the north? and "Light" depicting the supreme ruler of the world at the south. Throughout the murals adopt a monochromatic color scheme of beige, gray, and black which harmonizes with the other interior finishes.
At the mezzanine level the inside of the balcony is faced with Champlain marble. The outer walls are ivory marble above a Champlain marble wainscoting terminating in a bronze molding at the height of the doorways. The walls above are plain beige plaster, as are the ceilings.
Offices with bronze doors and bronze window surrounds open onto the balconies. The mezzanine continues as corridors westward beyond the balconies; both inner and outer walls have finishes similar to the outer walls of the balconies, and the office door and window configurations and finishes as they open onto the corridors are also similar. In the area adjacent to the western elevator bank are four piers, faced in ivory marble above a Champlain marble base and terminating in bronze molding strips-The floors throughout the mezzanine are of black terrazzo executed in rectangular patterns outlined with bronze strips.
At ground floor level, the corridors continue westward along the east-west axis beyond the fifth elevator bank. The ceiling level drops and this difference in height is marked by a change in materials. The corridor walls are faced in Champlain marble terminating in bronze moldings, and piers, continuing in the line of those in the double-height corridors, are also faced in Champlain marble terminating in bronze molding strips. Bronze waste receptacles are placed at the bases of several. The ceilings are white plaster. The treatment of the shopfronts on the outer walls is like that of the shopfronts in the double-height corridors. The floor surface is uniform throughout the ground floor, with black terrazzo set in panels with a green-gray center section, outlined with bronze strips.
Hallways extend from the corridors leading to the entrances from 49th Street and 50th Street. Each has two sets of revolving doors, framed in bronze. Bronze letters with the street names are placed above the doors. The walls continue the Champlain marble facing and bronze moldings of the corridor walls and are accented by bronze ventilation grilles, taking streamlined forms, display windows framed in bronze, and beveled bronze service doors. Directory boards and indicator signs throughout the corridors and hallways are outlined with bronze in streamlined motifs.
West of the elevator banks is a stairway leading down to the underground concourse; this is lined with Champlain marble and has bronze moldings, and handsome bronze railings. Similarly a stairway lined with Champlain marble and ivory marble in the same location leads up to the mezzanine. An enclosed stairway leads up to the mezzanine at the juncture of the RCA Building with the RCA Building West, while an open stairway leads down to the underground concourse. Both stairways are lined with Champlain marble and have bronze railings and bronze moldings.
The NBC lobby is faced with Champlain marble terminating in bronze moldings in the deep reveals opening from the corridors, and light green marble on the walls, terminating in nickel bronze moldings.
- From the 1985 NYCLPC Landmark Designation Report
Laxpressions is an experiment that taps the creative pulse of the inhabitants of Los Angeles County, and tests the artistic will of one man and his briefcase, as he stalks all the walks of all the lives and times of days and nights, methodically and photographically, documenting the results.
"I take pictures of people in Los Angeles County, with a par of sunglasses, and a copy of the LA.... Xpress. It doesn't cost a thing to try your creative hand and mind only three simple rules: the image must feature 1) you in LA county, with 2) a pair of sunglasses and 3) a copy of the LA...Xpress. It can be done anytime, anyplace, and anywhere, because in Los Angeles County you can always find a pair of sunglasses and a copy of the LA....Xpress." -Barry Boen
Laxpressions, Volume I: read the pictures. ©Twentyeleven, Print is Dead Publishing Co. The initial hardcover, 1st ed. press available late Summer 2011 from Print Is Dead Publishing on the shelves of your local bookstores or mail-order online.
A good thing continues
Some six months ago, I posted almost 100 images and a few thoughts I felt were missing from the many existing RX1 reviews. The outpouring of support and interest in that article was very gratifying. When I published, I had used the camera for six full months, enough time to come to a view of its strengths and weaknesses and to produce a small portfolio of good images, but not enough time to see the full picture (pun intended). In the following six months, I have used the camera at least as frequently as in the first six and have produced another small set of good images. It should be noted that my usage of the RX1 in the last six (and especially in the last 3) months has involved less travel and more time with the family and around the house; I will share relatively few of these images but will spend some time sharing my impressions of its functionality for family snapshots as I am sure there is some interest. And let it be said here: one of the primary motivations to purchase the camera was to take more photos with the family, and after one full year I can confidently say: money well spent.
The A7/r game-changer?
In the past six months, Sony have announced and released two full-frame, interchangeable lens cameras that clearly take design cues from the RX1: the A7 and the A7r. These cameras are innovative and highly capable and, as such, are in the midst of taking the photography world by storm. I think they are compelling enough cameras that I wonder whether Sony is wasting its energy continuing to develop further A-mount cameras. Sony deserve credit for a bold strategy—many companies would have been content to allow the success of the the RX1 (and RX1R) generate further sales before pushing further into the white space left unexplored by camera makers with less ambition.This is not the place to detail the relative advantages and disadvantages of the RX1 versus the A7/r except to make the following point. I currently use a Nikon D800 and an RX1: were I to sell both and purchase the A7r + 35mm f/2.8 I would in many ways lose nothing by way of imaging capability or lens compatibility but would pocket the surplus $1250-1750. Indeed this loyal Nikon owner thought long and hard about doing so, which speaks to the strategic importance of these cameras for a company trying to make inroads into a highly concentrated market.Ultimately, I opted to hang onto the two cameras I have (although this decision is one that I revisit time and time again) and continue to use them as I have for the past year. Let me give you a quick flavor of why.
The RX1 is smaller and more discrete
This is a small a point, but my gut reaction to the A7/r was: much smaller than the D800, not as small as the RX1. The EVF atop the A7/r and the larger profile of interchangeable mount lenses means that I would not be able to slip the A7/r into a pocket the way I can the RX1. Further, by virtue of using the EVF and its loud mechanical shutter, the A7/r just isn’t as stealthy as the RX1. Finally, f/2 beats the pants off of f/2.8 at the same or smaller size.At this point, some of you may be saying, “Future Sony releases will allow you to get a body without an EVF and get an f/2 lens that has a slimmer profile, etc, etc.” And that’s just the point: to oversimplify things, the reason I am keeping my RX1 is that Sony currently offers something close to an A7 body without a built-in EVF and with a slimmer profile 35mm f/2.
The D800 has important functional advantages
On the other side of the spectrum, the AF speed of the A7/r just isn’t going to match the D800, especially when the former is equipped with a Nikon lens and F-mount adapter. EVFs cannot yet match the experience of looking through the prism and the lens (I expect they will match soon, but aren’t there yet). What’s more, I have made such an investment in Nikon glass that I can’t yet justify purchasing an adapter for a Sony mount or selling them all for Sony’s offerings (many of which aren’t to market yet).Now, all of these are minor points and I think all of them disappear with an A8r, but they add up to something major: I have two cameras very well suited to two different types of shooting, and I ask myself if I gain or lose by getting something in between—something that wasn’t quite a pocket shooter and something that was quite a DSLR? You can imagine, however, that if I were coming to the market without a D800 and an RX1, that my decision would be far different: dollar for dollar, the A7/r would be a no-brainer.During the moments when I consider selling to grab an A7r, I keep coming back to a thought I had a month or so before the RX1 was announced. At that time I was considering something like the NEX cameras with a ZM 21mm f/2.8 and I said in my head, “I wish someone would make a carry-around camera with a full frame sensor and a fixed 35mm f/2.8 or f/2.” Now you understand how attractive the RX1 is to me and what a ridiculously high bar exists for another camera system to reach.
Okay, so what is different from the last review?
For one, I had an issue with the camera’s AF motor failing to engage and giving me an E61:00 error. I had to send it out to Sony for repairs (via extended warranty and service plan). I detailed my experience with Sony Service here [insert link] and I write to you as a very satisfied customer. That is to say, I have 3 years left on a 4 year + accidental damage warranty and I feel confident enough in that coverage to say that I will have this beauty in working order for at least another 3 years.For two, I’ve spent significantly less time thinking of this camera as a DSLR replacement and have instead started to develop a very different way of shooting with it. The activation barrier to taking a shot with my D800 is quite high. Beyond having to bring a large camera wherever you go and have it in hand, a proper camera takes two hands and full attention to produce an image. I shoot slowly and methodically and often from a tripod with the D800. In contrast, I can pull the RX1 out, pop off the lens cap, line up and take a shot with one hand (often with a toddler in the other). This fosters a totally different type of photography.
My “be-there” camera
The have-everywhere camera that gives DSLR type controls to one-handed shooting lets me pursue images that happen very quickly or images that might not normally meet the standards of “drag-the-DSLR-out-of-the-bag.” Many of those images you’ll see on this post. A full year of shooting and I can say this with great confidence: the RX1 is a terrific mash-up of point-and-shoot and DSLR not just in image quality and features, but primarily in the product it helps me create. To take this thinking a bit further: I find myself even processing images from the RX1 differently than I would from my DSLR. So much so that I have strongly considered starting a tumblr and posting JPEGs directly from the RX1 via my phone or an iPad rather than running the bulk of them through Lightroom, onto Flickr and then on the blog (really this is just a matter of time, stay tuned, and those readers who have experience with tumblr, cloud image storage and editing, etc, etc, please contact me, I want to pick your brain).Put simply, I capture more spontaneous and beautiful “moments” than I might have otherwise. Photography is very much an exercise in “f/8 and be there,” and the RX1 is my go-to “be there” camera.
The family camera
I mentioned earlier that I justified the purchase of the RX1 partly as a camera to be used to document the family moments into which a DSLR doesn’t neatly fit. Over the past year I’ve collected thousands and thousands of family images with the RX1. The cold hard truth is that many of those photos could be better if I’d taken a full DSLR kit with me to the park or the beach or the grocery store each time. The RX1 is a difficult camera to use on a toddler (or any moving subject for that matter); autofocus isn’t as fast as a professional DSLR, it’s difficult to perfectly compose via an LCD (especially in bright sunlight), but despite these shortcomings, it’s been an incredibly useful family camera. There are simply so many beautiful moments where I had the RX1 over my shoulder, ready to go that whatever difficulties exist relative to a DSLR, those pale in comparison to the power of it’s convenience. The best camera is the one in your hand.
Where to go from here.
So what is the value of these RX1 going forward, especially in a world of the A7/r and it’s yet-to-be-born siblings without an EVF and a pancake lens? Frankly, at its current price (which is quite fair when you consider the value of the the body and the lens) I see precious little room for an independent offering versus a mirrorless, interchangeable lens system with the same image quality in a package just as small. That doesn’t mean Sony won’t make an RX2 or an RX1 Mark II (have a look at it’s other product lines to see how many SKUs are maintained despite low demand). Instead, I see the RX1 as a bridge that needed to exist for engineers, managers, and the market to make it to the A7/r and it’s descendants.A Facebook friend recently paid me a great compliment; he said something like, “Justin, via your blog, you’ve sold a ton of RX1 cameras.” Indeed, despite my efforts not to be a salesman, I think he’s right: I have and would continue to recommend this camera.The true value of the RX1 going forward is for those of us who have the thing on our shoulders; and yes, if you have an investment in and a love for a DSLR system, there’s still tremendous value in getting one, slinging it over your shoulder, and heading out into the wide, bright world; A7/r or no, this is just an unbelievably capable camera.
A good thing continues
Some six months ago, I posted almost 100 images and a few thoughts I felt were missing from the many existing RX1 reviews. The outpouring of support and interest in that article was very gratifying. When I published, I had used the camera for six full months, enough time to come to a view of its strengths and weaknesses and to produce a small portfolio of good images, but not enough time to see the full picture (pun intended). In the following six months, I have used the camera at least as frequently as in the first six and have produced another small set of good images. It should be noted that my usage of the RX1 in the last six (and especially in the last 3) months has involved less travel and more time with the family and around the house; I will share relatively few of these images but will spend some time sharing my impressions of its functionality for family snapshots as I am sure there is some interest. And let it be said here: one of the primary motivations to purchase the camera was to take more photos with the family, and after one full year I can confidently say: money well spent.
The A7/r game-changer?
In the past six months, Sony have announced and released two full-frame, interchangeable lens cameras that clearly take design cues from the RX1: the A7 and the A7r. These cameras are innovative and highly capable and, as such, are in the midst of taking the photography world by storm. I think they are compelling enough cameras that I wonder whether Sony is wasting its energy continuing to develop further A-mount cameras. Sony deserve credit for a bold strategy—many companies would have been content to allow the success of the the RX1 (and RX1R) generate further sales before pushing further into the white space left unexplored by camera makers with less ambition.This is not the place to detail the relative advantages and disadvantages of the RX1 versus the A7/r except to make the following point. I currently use a Nikon D800 and an RX1: were I to sell both and purchase the A7r + 35mm f/2.8 I would in many ways lose nothing by way of imaging capability or lens compatibility but would pocket the surplus $1250-1750. Indeed this loyal Nikon owner thought long and hard about doing so, which speaks to the strategic importance of these cameras for a company trying to make inroads into a highly concentrated market.Ultimately, I opted to hang onto the two cameras I have (although this decision is one that I revisit time and time again) and continue to use them as I have for the past year. Let me give you a quick flavor of why.
The RX1 is smaller and more discrete
This is a small a point, but my gut reaction to the A7/r was: much smaller than the D800, not as small as the RX1. The EVF atop the A7/r and the larger profile of interchangeable mount lenses means that I would not be able to slip the A7/r into a pocket the way I can the RX1. Further, by virtue of using the EVF and its loud mechanical shutter, the A7/r just isn’t as stealthy as the RX1. Finally, f/2 beats the pants off of f/2.8 at the same or smaller size.At this point, some of you may be saying, “Future Sony releases will allow you to get a body without an EVF and get an f/2 lens that has a slimmer profile, etc, etc.” And that’s just the point: to oversimplify things, the reason I am keeping my RX1 is that Sony currently offers something close to an A7 body without a built-in EVF and with a slimmer profile 35mm f/2.
The D800 has important functional advantages
On the other side of the spectrum, the AF speed of the A7/r just isn’t going to match the D800, especially when the former is equipped with a Nikon lens and F-mount adapter. EVFs cannot yet match the experience of looking through the prism and the lens (I expect they will match soon, but aren’t there yet). What’s more, I have made such an investment in Nikon glass that I can’t yet justify purchasing an adapter for a Sony mount or selling them all for Sony’s offerings (many of which aren’t to market yet).Now, all of these are minor points and I think all of them disappear with an A8r, but they add up to something major: I have two cameras very well suited to two different types of shooting, and I ask myself if I gain or lose by getting something in between—something that wasn’t quite a pocket shooter and something that was quite a DSLR? You can imagine, however, that if I were coming to the market without a D800 and an RX1, that my decision would be far different: dollar for dollar, the A7/r would be a no-brainer.During the moments when I consider selling to grab an A7r, I keep coming back to a thought I had a month or so before the RX1 was announced. At that time I was considering something like the NEX cameras with a ZM 21mm f/2.8 and I said in my head, “I wish someone would make a carry-around camera with a full frame sensor and a fixed 35mm f/2.8 or f/2.” Now you understand how attractive the RX1 is to me and what a ridiculously high bar exists for another camera system to reach.
Okay, so what is different from the last review?
For one, I had an issue with the camera’s AF motor failing to engage and giving me an E61:00 error. I had to send it out to Sony for repairs (via extended warranty and service plan). I detailed my experience with Sony Service here [insert link] and I write to you as a very satisfied customer. That is to say, I have 3 years left on a 4 year + accidental damage warranty and I feel confident enough in that coverage to say that I will have this beauty in working order for at least another 3 years.For two, I’ve spent significantly less time thinking of this camera as a DSLR replacement and have instead started to develop a very different way of shooting with it. The activation barrier to taking a shot with my D800 is quite high. Beyond having to bring a large camera wherever you go and have it in hand, a proper camera takes two hands and full attention to produce an image. I shoot slowly and methodically and often from a tripod with the D800. In contrast, I can pull the RX1 out, pop off the lens cap, line up and take a shot with one hand (often with a toddler in the other). This fosters a totally different type of photography.
My “be-there” camera
The have-everywhere camera that gives DSLR type controls to one-handed shooting lets me pursue images that happen very quickly or images that might not normally meet the standards of “drag-the-DSLR-out-of-the-bag.” Many of those images you’ll see on this post. A full year of shooting and I can say this with great confidence: the RX1 is a terrific mash-up of point-and-shoot and DSLR not just in image quality and features, but primarily in the product it helps me create. To take this thinking a bit further: I find myself even processing images from the RX1 differently than I would from my DSLR. So much so that I have strongly considered starting a tumblr and posting JPEGs directly from the RX1 via my phone or an iPad rather than running the bulk of them through Lightroom, onto Flickr and then on the blog (really this is just a matter of time, stay tuned, and those readers who have experience with tumblr, cloud image storage and editing, etc, etc, please contact me, I want to pick your brain).Put simply, I capture more spontaneous and beautiful “moments” than I might have otherwise. Photography is very much an exercise in “f/8 and be there,” and the RX1 is my go-to “be there” camera.
The family camera
I mentioned earlier that I justified the purchase of the RX1 partly as a camera to be used to document the family moments into which a DSLR doesn’t neatly fit. Over the past year I’ve collected thousands and thousands of family images with the RX1. The cold hard truth is that many of those photos could be better if I’d taken a full DSLR kit with me to the park or the beach or the grocery store each time. The RX1 is a difficult camera to use on a toddler (or any moving subject for that matter); autofocus isn’t as fast as a professional DSLR, it’s difficult to perfectly compose via an LCD (especially in bright sunlight), but despite these shortcomings, it’s been an incredibly useful family camera. There are simply so many beautiful moments where I had the RX1 over my shoulder, ready to go that whatever difficulties exist relative to a DSLR, those pale in comparison to the power of it’s convenience. The best camera is the one in your hand.
Where to go from here.
So what is the value of these RX1 going forward, especially in a world of the A7/r and it’s yet-to-be-born siblings without an EVF and a pancake lens? Frankly, at its current price (which is quite fair when you consider the value of the the body and the lens) I see precious little room for an independent offering versus a mirrorless, interchangeable lens system with the same image quality in a package just as small. That doesn’t mean Sony won’t make an RX2 or an RX1 Mark II (have a look at it’s other product lines to see how many SKUs are maintained despite low demand). Instead, I see the RX1 as a bridge that needed to exist for engineers, managers, and the market to make it to the A7/r and it’s descendants.A Facebook friend recently paid me a great compliment; he said something like, “Justin, via your blog, you’ve sold a ton of RX1 cameras.” Indeed, despite my efforts not to be a salesman, I think he’s right: I have and would continue to recommend this camera.The true value of the RX1 going forward is for those of us who have the thing on our shoulders; and yes, if you have an investment in and a love for a DSLR system, there’s still tremendous value in getting one, slinging it over your shoulder, and heading out into the wide, bright world; A7/r or no, this is just an unbelievably capable camera.
A good thing continues
Some six months ago, I posted almost 100 images and a few thoughts I felt were missing from the many existing RX1 reviews. The outpouring of support and interest in that article was very gratifying. When I published, I had used the camera for six full months, enough time to come to a view of its strengths and weaknesses and to produce a small portfolio of good images, but not enough time to see the full picture (pun intended). In the following six months, I have used the camera at least as frequently as in the first six and have produced another small set of good images. It should be noted that my usage of the RX1 in the last six (and especially in the last 3) months has involved less travel and more time with the family and around the house; I will share relatively few of these images but will spend some time sharing my impressions of its functionality for family snapshots as I am sure there is some interest. And let it be said here: one of the primary motivations to purchase the camera was to take more photos with the family, and after one full year I can confidently say: money well spent.
The A7/r game-changer?
In the past six months, Sony have announced and released two full-frame, interchangeable lens cameras that clearly take design cues from the RX1: the A7 and the A7r. These cameras are innovative and highly capable and, as such, are in the midst of taking the photography world by storm. I think they are compelling enough cameras that I wonder whether Sony is wasting its energy continuing to develop further A-mount cameras. Sony deserve credit for a bold strategy—many companies would have been content to allow the success of the the RX1 (and RX1R) generate further sales before pushing further into the white space left unexplored by camera makers with less ambition.This is not the place to detail the relative advantages and disadvantages of the RX1 versus the A7/r except to make the following point. I currently use a Nikon D800 and an RX1: were I to sell both and purchase the A7r + 35mm f/2.8 I would in many ways lose nothing by way of imaging capability or lens compatibility but would pocket the surplus $1250-1750. Indeed this loyal Nikon owner thought long and hard about doing so, which speaks to the strategic importance of these cameras for a company trying to make inroads into a highly concentrated market.Ultimately, I opted to hang onto the two cameras I have (although this decision is one that I revisit time and time again) and continue to use them as I have for the past year. Let me give you a quick flavor of why.
The RX1 is smaller and more discrete
This is a small a point, but my gut reaction to the A7/r was: much smaller than the D800, not as small as the RX1. The EVF atop the A7/r and the larger profile of interchangeable mount lenses means that I would not be able to slip the A7/r into a pocket the way I can the RX1. Further, by virtue of using the EVF and its loud mechanical shutter, the A7/r just isn’t as stealthy as the RX1. Finally, f/2 beats the pants off of f/2.8 at the same or smaller size.At this point, some of you may be saying, “Future Sony releases will allow you to get a body without an EVF and get an f/2 lens that has a slimmer profile, etc, etc.” And that’s just the point: to oversimplify things, the reason I am keeping my RX1 is that Sony currently offers something close to an A7 body without a built-in EVF and with a slimmer profile 35mm f/2.
The D800 has important functional advantages
On the other side of the spectrum, the AF speed of the A7/r just isn’t going to match the D800, especially when the former is equipped with a Nikon lens and F-mount adapter. EVFs cannot yet match the experience of looking through the prism and the lens (I expect they will match soon, but aren’t there yet). What’s more, I have made such an investment in Nikon glass that I can’t yet justify purchasing an adapter for a Sony mount or selling them all for Sony’s offerings (many of which aren’t to market yet).Now, all of these are minor points and I think all of them disappear with an A8r, but they add up to something major: I have two cameras very well suited to two different types of shooting, and I ask myself if I gain or lose by getting something in between—something that wasn’t quite a pocket shooter and something that was quite a DSLR? You can imagine, however, that if I were coming to the market without a D800 and an RX1, that my decision would be far different: dollar for dollar, the A7/r would be a no-brainer.During the moments when I consider selling to grab an A7r, I keep coming back to a thought I had a month or so before the RX1 was announced. At that time I was considering something like the NEX cameras with a ZM 21mm f/2.8 and I said in my head, “I wish someone would make a carry-around camera with a full frame sensor and a fixed 35mm f/2.8 or f/2.” Now you understand how attractive the RX1 is to me and what a ridiculously high bar exists for another camera system to reach.
Okay, so what is different from the last review?
For one, I had an issue with the camera’s AF motor failing to engage and giving me an E61:00 error. I had to send it out to Sony for repairs (via extended warranty and service plan). I detailed my experience with Sony Service here [insert link] and I write to you as a very satisfied customer. That is to say, I have 3 years left on a 4 year + accidental damage warranty and I feel confident enough in that coverage to say that I will have this beauty in working order for at least another 3 years.For two, I’ve spent significantly less time thinking of this camera as a DSLR replacement and have instead started to develop a very different way of shooting with it. The activation barrier to taking a shot with my D800 is quite high. Beyond having to bring a large camera wherever you go and have it in hand, a proper camera takes two hands and full attention to produce an image. I shoot slowly and methodically and often from a tripod with the D800. In contrast, I can pull the RX1 out, pop off the lens cap, line up and take a shot with one hand (often with a toddler in the other). This fosters a totally different type of photography.
My “be-there” camera
The have-everywhere camera that gives DSLR type controls to one-handed shooting lets me pursue images that happen very quickly or images that might not normally meet the standards of “drag-the-DSLR-out-of-the-bag.” Many of those images you’ll see on this post. A full year of shooting and I can say this with great confidence: the RX1 is a terrific mash-up of point-and-shoot and DSLR not just in image quality and features, but primarily in the product it helps me create. To take this thinking a bit further: I find myself even processing images from the RX1 differently than I would from my DSLR. So much so that I have strongly considered starting a tumblr and posting JPEGs directly from the RX1 via my phone or an iPad rather than running the bulk of them through Lightroom, onto Flickr and then on the blog (really this is just a matter of time, stay tuned, and those readers who have experience with tumblr, cloud image storage and editing, etc, etc, please contact me, I want to pick your brain).Put simply, I capture more spontaneous and beautiful “moments” than I might have otherwise. Photography is very much an exercise in “f/8 and be there,” and the RX1 is my go-to “be there” camera.
The family camera
I mentioned earlier that I justified the purchase of the RX1 partly as a camera to be used to document the family moments into which a DSLR doesn’t neatly fit. Over the past year I’ve collected thousands and thousands of family images with the RX1. The cold hard truth is that many of those photos could be better if I’d taken a full DSLR kit with me to the park or the beach or the grocery store each time. The RX1 is a difficult camera to use on a toddler (or any moving subject for that matter); autofocus isn’t as fast as a professional DSLR, it’s difficult to perfectly compose via an LCD (especially in bright sunlight), but despite these shortcomings, it’s been an incredibly useful family camera. There are simply so many beautiful moments where I had the RX1 over my shoulder, ready to go that whatever difficulties exist relative to a DSLR, those pale in comparison to the power of it’s convenience. The best camera is the one in your hand.
Where to go from here.
So what is the value of these RX1 going forward, especially in a world of the A7/r and it’s yet-to-be-born siblings without an EVF and a pancake lens? Frankly, at its current price (which is quite fair when you consider the value of the the body and the lens) I see precious little room for an independent offering versus a mirrorless, interchangeable lens system with the same image quality in a package just as small. That doesn’t mean Sony won’t make an RX2 or an RX1 Mark II (have a look at it’s other product lines to see how many SKUs are maintained despite low demand). Instead, I see the RX1 as a bridge that needed to exist for engineers, managers, and the market to make it to the A7/r and it’s descendants.A Facebook friend recently paid me a great compliment; he said something like, “Justin, via your blog, you’ve sold a ton of RX1 cameras.” Indeed, despite my efforts not to be a salesman, I think he’s right: I have and would continue to recommend this camera.The true value of the RX1 going forward is for those of us who have the thing on our shoulders; and yes, if you have an investment in and a love for a DSLR system, there’s still tremendous value in getting one, slinging it over your shoulder, and heading out into the wide, bright world; A7/r or no, this is just an unbelievably capable camera.
A good thing continues
Some six months ago, I posted almost 100 images and a few thoughts I felt were missing from the many existing RX1 reviews. The outpouring of support and interest in that article was very gratifying. When I published, I had used the camera for six full months, enough time to come to a view of its strengths and weaknesses and to produce a small portfolio of good images, but not enough time to see the full picture (pun intended). In the following six months, I have used the camera at least as frequently as in the first six and have produced another small set of good images. It should be noted that my usage of the RX1 in the last six (and especially in the last 3) months has involved less travel and more time with the family and around the house; I will share relatively few of these images but will spend some time sharing my impressions of its functionality for family snapshots as I am sure there is some interest. And let it be said here: one of the primary motivations to purchase the camera was to take more photos with the family, and after one full year I can confidently say: money well spent.
The A7/r game-changer?
In the past six months, Sony have announced and released two full-frame, interchangeable lens cameras that clearly take design cues from the RX1: the A7 and the A7r. These cameras are innovative and highly capable and, as such, are in the midst of taking the photography world by storm. I think they are compelling enough cameras that I wonder whether Sony is wasting its energy continuing to develop further A-mount cameras. Sony deserve credit for a bold strategy—many companies would have been content to allow the success of the the RX1 (and RX1R) generate further sales before pushing further into the white space left unexplored by camera makers with less ambition.This is not the place to detail the relative advantages and disadvantages of the RX1 versus the A7/r except to make the following point. I currently use a Nikon D800 and an RX1: were I to sell both and purchase the A7r + 35mm f/2.8 I would in many ways lose nothing by way of imaging capability or lens compatibility but would pocket the surplus $1250-1750. Indeed this loyal Nikon owner thought long and hard about doing so, which speaks to the strategic importance of these cameras for a company trying to make inroads into a highly concentrated market.Ultimately, I opted to hang onto the two cameras I have (although this decision is one that I revisit time and time again) and continue to use them as I have for the past year. Let me give you a quick flavor of why.
The RX1 is smaller and more discrete
This is a small a point, but my gut reaction to the A7/r was: much smaller than the D800, not as small as the RX1. The EVF atop the A7/r and the larger profile of interchangeable mount lenses means that I would not be able to slip the A7/r into a pocket the way I can the RX1. Further, by virtue of using the EVF and its loud mechanical shutter, the A7/r just isn’t as stealthy as the RX1. Finally, f/2 beats the pants off of f/2.8 at the same or smaller size.At this point, some of you may be saying, “Future Sony releases will allow you to get a body without an EVF and get an f/2 lens that has a slimmer profile, etc, etc.” And that’s just the point: to oversimplify things, the reason I am keeping my RX1 is that Sony currently offers something close to an A7 body without a built-in EVF and with a slimmer profile 35mm f/2.
The D800 has important functional advantages
On the other side of the spectrum, the AF speed of the A7/r just isn’t going to match the D800, especially when the former is equipped with a Nikon lens and F-mount adapter. EVFs cannot yet match the experience of looking through the prism and the lens (I expect they will match soon, but aren’t there yet). What’s more, I have made such an investment in Nikon glass that I can’t yet justify purchasing an adapter for a Sony mount or selling them all for Sony’s offerings (many of which aren’t to market yet).Now, all of these are minor points and I think all of them disappear with an A8r, but they add up to something major: I have two cameras very well suited to two different types of shooting, and I ask myself if I gain or lose by getting something in between—something that wasn’t quite a pocket shooter and something that was quite a DSLR? You can imagine, however, that if I were coming to the market without a D800 and an RX1, that my decision would be far different: dollar for dollar, the A7/r would be a no-brainer.During the moments when I consider selling to grab an A7r, I keep coming back to a thought I had a month or so before the RX1 was announced. At that time I was considering something like the NEX cameras with a ZM 21mm f/2.8 and I said in my head, “I wish someone would make a carry-around camera with a full frame sensor and a fixed 35mm f/2.8 or f/2.” Now you understand how attractive the RX1 is to me and what a ridiculously high bar exists for another camera system to reach.
Okay, so what is different from the last review?
For one, I had an issue with the camera’s AF motor failing to engage and giving me an E61:00 error. I had to send it out to Sony for repairs (via extended warranty and service plan). I detailed my experience with Sony Service here [insert link] and I write to you as a very satisfied customer. That is to say, I have 3 years left on a 4 year + accidental damage warranty and I feel confident enough in that coverage to say that I will have this beauty in working order for at least another 3 years.For two, I’ve spent significantly less time thinking of this camera as a DSLR replacement and have instead started to develop a very different way of shooting with it. The activation barrier to taking a shot with my D800 is quite high. Beyond having to bring a large camera wherever you go and have it in hand, a proper camera takes two hands and full attention to produce an image. I shoot slowly and methodically and often from a tripod with the D800. In contrast, I can pull the RX1 out, pop off the lens cap, line up and take a shot with one hand (often with a toddler in the other). This fosters a totally different type of photography.
My “be-there” camera
The have-everywhere camera that gives DSLR type controls to one-handed shooting lets me pursue images that happen very quickly or images that might not normally meet the standards of “drag-the-DSLR-out-of-the-bag.” Many of those images you’ll see on this post. A full year of shooting and I can say this with great confidence: the RX1 is a terrific mash-up of point-and-shoot and DSLR not just in image quality and features, but primarily in the product it helps me create. To take this thinking a bit further: I find myself even processing images from the RX1 differently than I would from my DSLR. So much so that I have strongly considered starting a tumblr and posting JPEGs directly from the RX1 via my phone or an iPad rather than running the bulk of them through Lightroom, onto Flickr and then on the blog (really this is just a matter of time, stay tuned, and those readers who have experience with tumblr, cloud image storage and editing, etc, etc, please contact me, I want to pick your brain).Put simply, I capture more spontaneous and beautiful “moments” than I might have otherwise. Photography is very much an exercise in “f/8 and be there,” and the RX1 is my go-to “be there” camera.
The family camera
I mentioned earlier that I justified the purchase of the RX1 partly as a camera to be used to document the family moments into which a DSLR doesn’t neatly fit. Over the past year I’ve collected thousands and thousands of family images with the RX1. The cold hard truth is that many of those photos could be better if I’d taken a full DSLR kit with me to the park or the beach or the grocery store each time. The RX1 is a difficult camera to use on a toddler (or any moving subject for that matter); autofocus isn’t as fast as a professional DSLR, it’s difficult to perfectly compose via an LCD (especially in bright sunlight), but despite these shortcomings, it’s been an incredibly useful family camera. There are simply so many beautiful moments where I had the RX1 over my shoulder, ready to go that whatever difficulties exist relative to a DSLR, those pale in comparison to the power of it’s convenience. The best camera is the one in your hand.
Where to go from here.
So what is the value of these RX1 going forward, especially in a world of the A7/r and it’s yet-to-be-born siblings without an EVF and a pancake lens? Frankly, at its current price (which is quite fair when you consider the value of the the body and the lens) I see precious little room for an independent offering versus a mirrorless, interchangeable lens system with the same image quality in a package just as small. That doesn’t mean Sony won’t make an RX2 or an RX1 Mark II (have a look at it’s other product lines to see how many SKUs are maintained despite low demand). Instead, I see the RX1 as a bridge that needed to exist for engineers, managers, and the market to make it to the A7/r and it’s descendants.A Facebook friend recently paid me a great compliment; he said something like, “Justin, via your blog, you’ve sold a ton of RX1 cameras.” Indeed, despite my efforts not to be a salesman, I think he’s right: I have and would continue to recommend this camera.The true value of the RX1 going forward is for those of us who have the thing on our shoulders; and yes, if you have an investment in and a love for a DSLR system, there’s still tremendous value in getting one, slinging it over your shoulder, and heading out into the wide, bright world; A7/r or no, this is just an unbelievably capable camera.
A good thing continues
Some six months ago, I posted almost 100 images and a few thoughts I felt were missing from the many existing RX1 reviews. The outpouring of support and interest in that article was very gratifying. When I published, I had used the camera for six full months, enough time to come to a view of its strengths and weaknesses and to produce a small portfolio of good images, but not enough time to see the full picture (pun intended). In the following six months, I have used the camera at least as frequently as in the first six and have produced another small set of good images. It should be noted that my usage of the RX1 in the last six (and especially in the last 3) months has involved less travel and more time with the family and around the house; I will share relatively few of these images but will spend some time sharing my impressions of its functionality for family snapshots as I am sure there is some interest. And let it be said here: one of the primary motivations to purchase the camera was to take more photos with the family, and after one full year I can confidently say: money well spent.
The A7/r game-changer?
In the past six months, Sony have announced and released two full-frame, interchangeable lens cameras that clearly take design cues from the RX1: the A7 and the A7r. These cameras are innovative and highly capable and, as such, are in the midst of taking the photography world by storm. I think they are compelling enough cameras that I wonder whether Sony is wasting its energy continuing to develop further A-mount cameras. Sony deserve credit for a bold strategy—many companies would have been content to allow the success of the the RX1 (and RX1R) generate further sales before pushing further into the white space left unexplored by camera makers with less ambition.This is not the place to detail the relative advantages and disadvantages of the RX1 versus the A7/r except to make the following point. I currently use a Nikon D800 and an RX1: were I to sell both and purchase the A7r + 35mm f/2.8 I would in many ways lose nothing by way of imaging capability or lens compatibility but would pocket the surplus $1250-1750. Indeed this loyal Nikon owner thought long and hard about doing so, which speaks to the strategic importance of these cameras for a company trying to make inroads into a highly concentrated market.Ultimately, I opted to hang onto the two cameras I have (although this decision is one that I revisit time and time again) and continue to use them as I have for the past year. Let me give you a quick flavor of why.
The RX1 is smaller and more discrete
This is a small a point, but my gut reaction to the A7/r was: much smaller than the D800, not as small as the RX1. The EVF atop the A7/r and the larger profile of interchangeable mount lenses means that I would not be able to slip the A7/r into a pocket the way I can the RX1. Further, by virtue of using the EVF and its loud mechanical shutter, the A7/r just isn’t as stealthy as the RX1. Finally, f/2 beats the pants off of f/2.8 at the same or smaller size.At this point, some of you may be saying, “Future Sony releases will allow you to get a body without an EVF and get an f/2 lens that has a slimmer profile, etc, etc.” And that’s just the point: to oversimplify things, the reason I am keeping my RX1 is that Sony currently offers something close to an A7 body without a built-in EVF and with a slimmer profile 35mm f/2.
The D800 has important functional advantages
On the other side of the spectrum, the AF speed of the A7/r just isn’t going to match the D800, especially when the former is equipped with a Nikon lens and F-mount adapter. EVFs cannot yet match the experience of looking through the prism and the lens (I expect they will match soon, but aren’t there yet). What’s more, I have made such an investment in Nikon glass that I can’t yet justify purchasing an adapter for a Sony mount or selling them all for Sony’s offerings (many of which aren’t to market yet).Now, all of these are minor points and I think all of them disappear with an A8r, but they add up to something major: I have two cameras very well suited to two different types of shooting, and I ask myself if I gain or lose by getting something in between—something that wasn’t quite a pocket shooter and something that was quite a DSLR? You can imagine, however, that if I were coming to the market without a D800 and an RX1, that my decision would be far different: dollar for dollar, the A7/r would be a no-brainer.During the moments when I consider selling to grab an A7r, I keep coming back to a thought I had a month or so before the RX1 was announced. At that time I was considering something like the NEX cameras with a ZM 21mm f/2.8 and I said in my head, “I wish someone would make a carry-around camera with a full frame sensor and a fixed 35mm f/2.8 or f/2.” Now you understand how attractive the RX1 is to me and what a ridiculously high bar exists for another camera system to reach.
Okay, so what is different from the last review?
For one, I had an issue with the camera’s AF motor failing to engage and giving me an E61:00 error. I had to send it out to Sony for repairs (via extended warranty and service plan). I detailed my experience with Sony Service here [insert link] and I write to you as a very satisfied customer. That is to say, I have 3 years left on a 4 year + accidental damage warranty and I feel confident enough in that coverage to say that I will have this beauty in working order for at least another 3 years.For two, I’ve spent significantly less time thinking of this camera as a DSLR replacement and have instead started to develop a very different way of shooting with it. The activation barrier to taking a shot with my D800 is quite high. Beyond having to bring a large camera wherever you go and have it in hand, a proper camera takes two hands and full attention to produce an image. I shoot slowly and methodically and often from a tripod with the D800. In contrast, I can pull the RX1 out, pop off the lens cap, line up and take a shot with one hand (often with a toddler in the other). This fosters a totally different type of photography.
My “be-there” camera
The have-everywhere camera that gives DSLR type controls to one-handed shooting lets me pursue images that happen very quickly or images that might not normally meet the standards of “drag-the-DSLR-out-of-the-bag.” Many of those images you’ll see on this post. A full year of shooting and I can say this with great confidence: the RX1 is a terrific mash-up of point-and-shoot and DSLR not just in image quality and features, but primarily in the product it helps me create. To take this thinking a bit further: I find myself even processing images from the RX1 differently than I would from my DSLR. So much so that I have strongly considered starting a tumblr and posting JPEGs directly from the RX1 via my phone or an iPad rather than running the bulk of them through Lightroom, onto Flickr and then on the blog (really this is just a matter of time, stay tuned, and those readers who have experience with tumblr, cloud image storage and editing, etc, etc, please contact me, I want to pick your brain).Put simply, I capture more spontaneous and beautiful “moments” than I might have otherwise. Photography is very much an exercise in “f/8 and be there,” and the RX1 is my go-to “be there” camera.
The family camera
I mentioned earlier that I justified the purchase of the RX1 partly as a camera to be used to document the family moments into which a DSLR doesn’t neatly fit. Over the past year I’ve collected thousands and thousands of family images with the RX1. The cold hard truth is that many of those photos could be better if I’d taken a full DSLR kit with me to the park or the beach or the grocery store each time. The RX1 is a difficult camera to use on a toddler (or any moving subject for that matter); autofocus isn’t as fast as a professional DSLR, it’s difficult to perfectly compose via an LCD (especially in bright sunlight), but despite these shortcomings, it’s been an incredibly useful family camera. There are simply so many beautiful moments where I had the RX1 over my shoulder, ready to go that whatever difficulties exist relative to a DSLR, those pale in comparison to the power of it’s convenience. The best camera is the one in your hand.
Where to go from here.
So what is the value of these RX1 going forward, especially in a world of the A7/r and it’s yet-to-be-born siblings without an EVF and a pancake lens? Frankly, at its current price (which is quite fair when you consider the value of the the body and the lens) I see precious little room for an independent offering versus a mirrorless, interchangeable lens system with the same image quality in a package just as small. That doesn’t mean Sony won’t make an RX2 or an RX1 Mark II (have a look at it’s other product lines to see how many SKUs are maintained despite low demand). Instead, I see the RX1 as a bridge that needed to exist for engineers, managers, and the market to make it to the A7/r and it’s descendants.A Facebook friend recently paid me a great compliment; he said something like, “Justin, via your blog, you’ve sold a ton of RX1 cameras.” Indeed, despite my efforts not to be a salesman, I think he’s right: I have and would continue to recommend this camera.The true value of the RX1 going forward is for those of us who have the thing on our shoulders; and yes, if you have an investment in and a love for a DSLR system, there’s still tremendous value in getting one, slinging it over your shoulder, and heading out into the wide, bright world; A7/r or no, this is just an unbelievably capable camera.
A good thing continues
Some six months ago, I posted almost 100 images and a few thoughts I felt were missing from the many existing RX1 reviews. The outpouring of support and interest in that article was very gratifying. When I published, I had used the camera for six full months, enough time to come to a view of its strengths and weaknesses and to produce a small portfolio of good images, but not enough time to see the full picture (pun intended). In the following six months, I have used the camera at least as frequently as in the first six and have produced another small set of good images. It should be noted that my usage of the RX1 in the last six (and especially in the last 3) months has involved less travel and more time with the family and around the house; I will share relatively few of these images but will spend some time sharing my impressions of its functionality for family snapshots as I am sure there is some interest. And let it be said here: one of the primary motivations to purchase the camera was to take more photos with the family, and after one full year I can confidently say: money well spent.
The A7/r game-changer?
In the past six months, Sony have announced and released two full-frame, interchangeable lens cameras that clearly take design cues from the RX1: the A7 and the A7r. These cameras are innovative and highly capable and, as such, are in the midst of taking the photography world by storm. I think they are compelling enough cameras that I wonder whether Sony is wasting its energy continuing to develop further A-mount cameras. Sony deserve credit for a bold strategy—many companies would have been content to allow the success of the the RX1 (and RX1R) generate further sales before pushing further into the white space left unexplored by camera makers with less ambition.This is not the place to detail the relative advantages and disadvantages of the RX1 versus the A7/r except to make the following point. I currently use a Nikon D800 and an RX1: were I to sell both and purchase the A7r + 35mm f/2.8 I would in many ways lose nothing by way of imaging capability or lens compatibility but would pocket the surplus $1250-1750. Indeed this loyal Nikon owner thought long and hard about doing so, which speaks to the strategic importance of these cameras for a company trying to make inroads into a highly concentrated market.Ultimately, I opted to hang onto the two cameras I have (although this decision is one that I revisit time and time again) and continue to use them as I have for the past year. Let me give you a quick flavor of why.
The RX1 is smaller and more discrete
This is a small a point, but my gut reaction to the A7/r was: much smaller than the D800, not as small as the RX1. The EVF atop the A7/r and the larger profile of interchangeable mount lenses means that I would not be able to slip the A7/r into a pocket the way I can the RX1. Further, by virtue of using the EVF and its loud mechanical shutter, the A7/r just isn’t as stealthy as the RX1. Finally, f/2 beats the pants off of f/2.8 at the same or smaller size.At this point, some of you may be saying, “Future Sony releases will allow you to get a body without an EVF and get an f/2 lens that has a slimmer profile, etc, etc.” And that’s just the point: to oversimplify things, the reason I am keeping my RX1 is that Sony currently offers something close to an A7 body without a built-in EVF and with a slimmer profile 35mm f/2.
The D800 has important functional advantages
On the other side of the spectrum, the AF speed of the A7/r just isn’t going to match the D800, especially when the former is equipped with a Nikon lens and F-mount adapter. EVFs cannot yet match the experience of looking through the prism and the lens (I expect they will match soon, but aren’t there yet). What’s more, I have made such an investment in Nikon glass that I can’t yet justify purchasing an adapter for a Sony mount or selling them all for Sony’s offerings (many of which aren’t to market yet).Now, all of these are minor points and I think all of them disappear with an A8r, but they add up to something major: I have two cameras very well suited to two different types of shooting, and I ask myself if I gain or lose by getting something in between—something that wasn’t quite a pocket shooter and something that was quite a DSLR? You can imagine, however, that if I were coming to the market without a D800 and an RX1, that my decision would be far different: dollar for dollar, the A7/r would be a no-brainer.During the moments when I consider selling to grab an A7r, I keep coming back to a thought I had a month or so before the RX1 was announced. At that time I was considering something like the NEX cameras with a ZM 21mm f/2.8 and I said in my head, “I wish someone would make a carry-around camera with a full frame sensor and a fixed 35mm f/2.8 or f/2.” Now you understand how attractive the RX1 is to me and what a ridiculously high bar exists for another camera system to reach.
Okay, so what is different from the last review?
For one, I had an issue with the camera’s AF motor failing to engage and giving me an E61:00 error. I had to send it out to Sony for repairs (via extended warranty and service plan). I detailed my experience with Sony Service here [insert link] and I write to you as a very satisfied customer. That is to say, I have 3 years left on a 4 year + accidental damage warranty and I feel confident enough in that coverage to say that I will have this beauty in working order for at least another 3 years.For two, I’ve spent significantly less time thinking of this camera as a DSLR replacement and have instead started to develop a very different way of shooting with it. The activation barrier to taking a shot with my D800 is quite high. Beyond having to bring a large camera wherever you go and have it in hand, a proper camera takes two hands and full attention to produce an image. I shoot slowly and methodically and often from a tripod with the D800. In contrast, I can pull the RX1 out, pop off the lens cap, line up and take a shot with one hand (often with a toddler in the other). This fosters a totally different type of photography.
My “be-there” camera
The have-everywhere camera that gives DSLR type controls to one-handed shooting lets me pursue images that happen very quickly or images that might not normally meet the standards of “drag-the-DSLR-out-of-the-bag.” Many of those images you’ll see on this post. A full year of shooting and I can say this with great confidence: the RX1 is a terrific mash-up of point-and-shoot and DSLR not just in image quality and features, but primarily in the product it helps me create. To take this thinking a bit further: I find myself even processing images from the RX1 differently than I would from my DSLR. So much so that I have strongly considered starting a tumblr and posting JPEGs directly from the RX1 via my phone or an iPad rather than running the bulk of them through Lightroom, onto Flickr and then on the blog (really this is just a matter of time, stay tuned, and those readers who have experience with tumblr, cloud image storage and editing, etc, etc, please contact me, I want to pick your brain).Put simply, I capture more spontaneous and beautiful “moments” than I might have otherwise. Photography is very much an exercise in “f/8 and be there,” and the RX1 is my go-to “be there” camera.
The family camera
I mentioned earlier that I justified the purchase of the RX1 partly as a camera to be used to document the family moments into which a DSLR doesn’t neatly fit. Over the past year I’ve collected thousands and thousands of family images with the RX1. The cold hard truth is that many of those photos could be better if I’d taken a full DSLR kit with me to the park or the beach or the grocery store each time. The RX1 is a difficult camera to use on a toddler (or any moving subject for that matter); autofocus isn’t as fast as a professional DSLR, it’s difficult to perfectly compose via an LCD (especially in bright sunlight), but despite these shortcomings, it’s been an incredibly useful family camera. There are simply so many beautiful moments where I had the RX1 over my shoulder, ready to go that whatever difficulties exist relative to a DSLR, those pale in comparison to the power of it’s convenience. The best camera is the one in your hand.
Where to go from here.
So what is the value of these RX1 going forward, especially in a world of the A7/r and it’s yet-to-be-born siblings without an EVF and a pancake lens? Frankly, at its current price (which is quite fair when you consider the value of the the body and the lens) I see precious little room for an independent offering versus a mirrorless, interchangeable lens system with the same image quality in a package just as small. That doesn’t mean Sony won’t make an RX2 or an RX1 Mark II (have a look at it’s other product lines to see how many SKUs are maintained despite low demand). Instead, I see the RX1 as a bridge that needed to exist for engineers, managers, and the market to make it to the A7/r and it’s descendants.A Facebook friend recently paid me a great compliment; he said something like, “Justin, via your blog, you’ve sold a ton of RX1 cameras.” Indeed, despite my efforts not to be a salesman, I think he’s right: I have and would continue to recommend this camera.The true value of the RX1 going forward is for those of us who have the thing on our shoulders; and yes, if you have an investment in and a love for a DSLR system, there’s still tremendous value in getting one, slinging it over your shoulder, and heading out into the wide, bright world; A7/r or no, this is just an unbelievably capable camera.
The water buffalo or domestic Asian water buffalo (Bubalus bubalis) is a large bovid originating in South Asia, Southeast Asia, and China. Today, it is also found in Europe, Australia, and some American countries. The wild water buffalo (Bubalus arnee) native to Southeast Asia is considered a different species, but most likely represents the ancestor of the domestic water buffalo.
Two extant types of water buffalo are recognized based on morphological and behavioural criteria – the river buffalo of South Asia and further west to the Balkans, Egypt, and Italy, and the swamp buffalo, found from Assam in the west through Southeast Asia to the Yangtze valley of China in the east. The origins of the domestic water buffalo types are debated, although results of a phylogenetic study indicate that the swamp type may have originated in China and was domesticated about 4,000 years ago, while the river type may have originated from India and was domesticated about 5,000 years ago. Water buffalo were traded from the Indus Valley Civilisation to Mesopotamia, in modern Iraq, 2500 BC by the Meluhhas. The seal of a scribe employed by an Akkadian king shows the sacrifice of water buffalo.
At least 130 million domestic water buffalo exist, and more human beings depend on them than on any other domestic animal. They are especially suitable for tilling rice fields, and their milk is richer in fat and protein than that of dairy cattle. The large feral population of northern Australia became established in the late 19th century, and smaller feral herds are in New Guinea, Tunisia, and northeastern Argentina. Feral herds are also present in New Britain, New Ireland, Irian Jaya, Papua New Guinea, Colombia, Guyana, Suriname, Brazil, and Uruguay.
CHARACTERISTICS
The skin of river buffalo is black, but some specimens may have dark, slate-coloured skin. Swamp buffalo have a grey skin at birth, but become slate blue later. Albinoids are present in some populations. River buffalo have comparatively longer faces, smaller girths, and bigger limbs than swamp buffalo. Their dorsal ridges extend further back and taper off more gradually. Their horns grow downward and backward, then curve upward in a spiral. Swamp buffalo are heavy-bodied and stockily built; the body is short and the belly large. The forehead is flat, the eyes prominent, the face short, and the muzzle wide. The neck is comparatively long, and the withers and croup are prominent. A dorsal ridge extends backward and ends abruptly just before the end of the chest. Their horns grow outward, and curve in a semicircle, but always remain more or less on the plane of the forehead. The tail is short, reaching only to the hocks. Height at withers is 129–133 cm for males, and 120–127 cm for females. They range in weight from 300–550 kg, but weights of over 1,000 kg have also been observed.
Tedong bonga is a black pied buffalo featuring a unique black and white colouration that is favoured by the Toraja of Sulawesi.
The swamp buffalo has 48 chromosomes; the river buffalo has 50 chromosomes. The two types do not readily interbreed, but fertile offspring can occur. Buffalo-cattle hybrids have not been observed to occur, and the embryos of such hybrids do not reach maturity in laboratory experiments.
The rumen of the water buffalo has important differences from that of other ruminants. It contains a larger population of bacteria, particularly the cellulolytic bacteria, lower protozoa, and higher fungi zoospores. In addition, higher rumen ammonia nitrogen (NH4-N) and higher pH have been found as compared to those in cattle
ECOLOGY AND BEHAVIOR
River buffalo prefer deep water. Swamp buffalo prefer to wallow in mudholes which they make with their horns. During wallowing, they acquire a thick coating of mud. Both are well adapted to a hot and humid climate with temperatures ranging from 0 °C in the winter to 30 °C and greater in the summer. Water availability is important in hot climates, since they need wallows, rivers, or splashing water to assist in thermoregulation. Some breeds are adapted to saline seaside shores and saline sandy terrain.
DIET
Water buffalo thrive on many aquatic plants and during floods, will graze submerged, raising their heads above the water and carrying quantities of edible plants. They eat reeds (quassab), a giant reed (birdi), a kind of bulrush (kaulan), water hyacinth, and marsh grasses. Some of these plants are of great value to local peoples. Others, such as water hyacinth, are a major problem in some tropical valleys, and water buffalo may help to keep waterways clear.
Green fodders are used widely for intensive milk production and for fattening. Many fodder crops are conserved as hay, chaffed, or pulped. Fodders include alfalfa, berseem and bancheri, the leaves, stems or trimmings of banana, cassava, fodder beet, halfa, ipil-ipil and kenaf, maize, oats, pandarus, peanut, sorghum, soybean, sugarcane, bagasse, and turnips. Citrus pulp and pineapple wastes have been fed safely to buffalo. In Egypt, whole sun-dried dates are fed to milk-buffalo up to 25% of the standard feed mixture.
REPRODUCTION
Swamp buffalo generally become reproductive at an older age than river breeds. Young males in Egypt, India, and Pakistan are first mated at about 3.0–3.5 years of age, but in Italy
they may be used as early as 2 years of age. Successful mating behaviour may continue until the animal is 12 years or even older. A good river male can impregnate 100 females in a year. A strong seasonal influence on mating occurs. Heat stress reduces libido
Although buffalo are polyoestrous, their reproductive efficiency shows wide variation throughout the year. Buffalo cows exhibit a distinct seasonal change in displaying oestrus, conception rate, and calving rate. The age at first oestrus of heifers varies between breeds from 13–33 months, but mating at the first oestrus is often infertile and usually deferred until they are 3 years old. Gestation lasts from 281–334 days, but most reports give a range between 300 and 320 days. Swamp buffalo carry their calves for one or two weeks longer than river buffalo. It is not rare to find buffalo that continue to work well at the age of 30, and instances of a working life of 40 years are recorded.
TAXONOMIC HISTORY
Carl Linnaeus first described the genus Bos and the water buffalo under the binomial Bubalis bubalus in 1758; the latter was known to occur in Asia and as a domestic form in Italy. Ellerman and Morrison-Scott treated the wild and domestic forms of the water buffalo as conspecifics whereas others treated them as different species. The nomenclatorial treatment of wild and domestic forms has been inconsistent and varies between authors and even within the works of single authors.
In March 2003, the International Commission on Zoological Nomenclature achieved consistency in the naming of wild and domestic water buffalo by ruling that the scientific name Bubalus arnee is valid for the wild form. B. bubalis continues to be valid for the domestic form and applies also to feral populations.
DOMESTICATION AND BREEDING
Water buffalo were domesticated in India about 5000 years ago, and in China about 4000 years ago. Two types are recognized, based on morphological and behavioural criteria – the river buffalo of the Indian subcontinent and further west to the Balkans and Italy, and the swamp buffalo, found from Assam in the west through Southeast Asia to the Yangtze valley of China in the east. The present-day river buffalo is the result of complex domestication processes involving more than one maternal lineage and a significant maternal gene flow from wild populations after the initial domestication events. Twenty-two breeds of the river type water buffalo are known, including Murrah, Nili-Ravi, Surti, Jafarabadi, Anatolian, Mediterranean, and Egyptian buffalo. China has a huge variety of buffalo genetic resources, comprising 16 local swamp buffalo breeds in various regions.
Results of mitochondrial DNA analyses indicate that the two types were domesticated independently. Sequencing of cytochrome b genes of Bubalus species implies that the domestic buffalo originated from at least two populations, and that the river and the swamp types have differentiated at the full species level. The genetic distance between the two types is so large that a divergence time of about 1.7 million years has been suggested. The swamp type was noticed to have the closest relationship with the tamaraw.
DISTRIBUTION OF POPULATIONS
The water buffalo population in the world is about 172 million.
IN ASIA
More than 95.8% of the world population of water buffalo are found in Asia including both river and swamp types. The water buffalo population in India numbered over 97.9 million head in 2003, representing 56.5% of the world population. They are primarily of the river type, with 10 well-defined breeds comprising Badhawari, Murrah, Nili-Ravi, Jafarabadi, Marathwada, Mehsana, Nagpuri, Pandharpuri, Toda, and Surti. Swamp buffalo occur only in small areas in the north-eastern part of the country and are not distinguished into breeds.
In 2003, the second-largest population lived in China, with 22.759 million head, all of the swamp type with breeds kept only in the lowlands, and other breeds kept only in the mountains; as of 2003, 3.2 million swamp-type carabao buffalo were in the Philippines, nearly three million swamp buffalo were in Vietnam, and 772,764 buffalo were in Bangladesh. About 750,000 head were estimated in Sri Lanka in 1997.
The water buffalo is the main dairy animal in Pakistan, with 23.47 million head in 2010. Of these, 76% are kept in the Punjab. The rest of them are mostly in the province of Sindh. Breeds used are Nili-Ravi, Kundi, and Azi Kheli. Karachi has the largest population of water buffalos for an area where fodder is not grown, consisting of 350,000 head kept mainly for milking.
In Thailand, the number of water buffalo dropped from more than 3 million head in 1996 to less than 1.24 million head in 2011. Slightly over 75% of them are kept in the country's northeastern region. The statistics also indicate that by the beginning of 2012, less than one million were in the country, partly as a result of illegal shipments to neighboring countries where sales prices are higher than in Thailand.
Water buffalo are also present in the southern region of Iraq, in the marshes. These marshes were drained by Saddam Hussein in 1991 in an attempt to punish the south for the uprisings of 1991. Following 2003, and the fall of the Saddam regime, these lands were reflooded and a 2007 report in the provinces of Maysan and Thi Qar shows a steady increase in the number of water buffalo. The report puts the number at 40,008 head in those two provinces.
IN EUROPE AND THE MEDITERRANEAN
Water buffalo likely were introduced to Europe from India or other Oriental countries. To Italy they were introduced about the year 600 in the reign of the Longobard King Agilulf. As they appear in the company of wild horses, they probably were a present from the Khan of the Avars, a Turkic nomadic tribe that dwelt near the Danube River at the time. Sir H. Johnston knew of a herd of water buffalo presented by a King of Naples to the Bey of Tunis in the mid-19th century that had resumed the feral state in northern Tunis.
European buffalo are all of the river type and considered to be of the same breed named Mediterranean buffalo. In Italy, the Mediterranean type was particularly selected and is called Mediterranean Italian breed to distinguish it from other European breeds, which differ genetically. Mediterranean buffalo are also found in Romania, Bulgaria, Greece, Albania, Kosovo, and the Republic of Macedonia, with a few hundred in the United Kingdom, Germany, the Netherlands, Switzerland, and Hungary. Little exchange of breeding buffalo has occurred among countries, so each population has its own phenotypic features and performances. In Bulgaria, they were crossbred with the Indian Murrah breed, and in Romania, some were crossbred with Bulgarian Murrah. Populations in Turkey are of the Anatolian buffalo breed.
IN AUSTRALIA
Between 1824 and 1849, water buffalo were introduced into the Northern Territory from Timor, Kisar, and probably other islands in the Indonesian archipelago. In 1886, a few milking types were brought from India to Darwin. They have been the main grazing animals on the subcoastal plains and river basins between Darwin and Arnhem Land since the 1880s. In the early 1960s, an estimated population of 150,000 to 200,000 buffalo were living in the plains and nearby areas.
They became feral and are causing significant environmental damage. Buffalo are also found in the Top End. As a result, they were hunted in the Top End from 1885 until 1980. The commencement of the brucellosis and tuberculosis campaign (BTEC) resulted in a huge culling program to reduce buffalo herds to a fraction of the numbers that were reached in the 1980s. The BTEC was finished when the Northern Territory was declared free of the disease in 1997. Numbers dropped dramatically as a result of the campaign, but have since recovered to an estimated 150,000 animals across northern Australia in 2008.
During the 1950s, buffalo were hunted for their skins and meat, which was exported and used in the local trade. In the late 1970s, live exports were made to Cuba and continued later into other countries. Buffalo are now crossed with riverine buffalo in artificial insemination programs, and may be found in many areas of Australia. Some of these crossbreds are used for milk production. Melville Island is a popular hunting location, where a steady population up to 4,000 individuals exists. Safari outfits are run from Darwin to Melville Island and other locations in the Top End, often with the use of bush pilots. The horns, which can measure up to a record of 3.1 m tip-to-tip, are prized hunting trophies.
The buffalo have developed a different appearance from the Indonesian buffalo from which they descend. They live mainly in freshwater marshes and billabongs, and their territory range can be quite expansive during the wet season. Their only natural predators in Australia are adult saltwater crocodiles, with whom they share the billabongs, and dingoes, which have been known to prey on buffalo calves and occasionally adult buffalo when the dingoes are in large packs.
Buffalo were exported live to Indonesia until 2011, at a rate of about 3000 per year. After the live export ban that year, the exports dropped to zero, and had not resumed as of June 2013.
IN SOUTH AMERICA
Water buffalo were introduced into the Amazon River basin in 1895. They are now extensively used there for meat and dairy production. In 2005, the buffalo herd in the Brazilian Amazon stood at roughly 1.6 million head, of which 460,000 were located in the lower Amazon floodplain. Breeds used include Mediterranean from Italy, Murrah and Jafarabadi from India, and Carabao from the Philippines.
During the 1970s, small herds were imported to Costa Rica, Ecuador, Cayenne, Panama, Surinam, Guyana, and Venezuela.
In Argentina, many game ranches raise water buffalo for commercial hunting
IN NORTH AMERICA
In 1974, four water buffalo were imported to the United States from Guam to be studied at the University of Florida. In February 1978, the first herd arrived for commercial farming. Until 2002, only one commercial breeder was in the United States. Water buffalo meat is imported from Australia. Until 2011, water buffalo were raised in Gainesville, Florida, from young obtained from zoo overflow. They were used primarily for meat production, frequently sold as hamburger.[38] Other US ranchers use them for production of high-quality mozzarella cheese.
HUSBANDRY
The husbandry system of water buffalo depends on the purpose for which they are bred and maintained. Most of them are kept by people who work on small farms in family units. Their buffalo live in very close association with them, and are often their greatest capital asset. The women and girls in India generally look after the milking buffalo while the men and boys are concerned with the working animals. Throughout Asia, they are commonly tended by children who are often seen leading or riding their charges to wallowing places. Water buffalo are the ideal animals for work in the deep mud of paddy fields because of their large hooves and flexible foot joints. They are often referred to as "the living tractor of the East". It probably is possible to plough deeper with buffalo than with either oxen or horses. They are the most efficient and economical means of cultivation of small fields. In most rice-producing countries, they are used for threshing and for transporting the sheaves during the rice harvest. They provide power for oilseed mills, sugarcane presses, and devices for raising water. They are widely used as pack animals, and in India and Pakistan also for heavy haulage. In their invasions of Europe, the Turks used buffalo for hauling heavy battering rams. Their dung is used as a fertilizer, and as a fuel when dried.
Buffalo contribute 72 million tones of milk and three million tones of meat annually to world food, much of it in areas that are prone to nutritional imbalances. In India, river-type buffalo are kept mainly for milk production and for transport, whereas swamp-type buffalo are kept mainly for work and a small amount of milk.
DAIRY PRODUCTS
Water buffalo milk presents physicochemical features different from that of other ruminant species, such as a higher content of fatty acids and proteins. The physical and chemical parameters of swamp and river type water buffalo milk differ. Water buffalo milk contains higher levels of total solids, crude protein, fat, calcium, and phosphorus, and slightly higher content of lactose compared with those of cow milk. The high level of total solids makes water buffalo milk ideal for processing into value-added dairy products such as cheese. The conjugated linoleic acid (CLA) content in milk ranged from 4.4 mg/g fat in September to 7.6 mg/g fat in June. Seasons and genetics may play a role in variation of CLA level and changes in gross composition of the water buffalo milk.
Water buffalo milk is processed into a large variety of dairy products:
- Cream churns much faster at higher fat levels and gives higher overrun than cow cream.
- Butter from water buffalo cream displays more stability than that from cow cream.
- Ghee from water buffalo milk has a different texture with a bigger grain size than ghee from cow milk.
- Heat-concentrated milk products in the Indian subcontinent include paneer, khoa, rabri, kheer and basundi.
- Fermented milk products include dahi, yogurt, and chakka.
- Whey is used for making ricotta and mascarpone in Italy, and alkarish in Syria and Egypt.
- Soft cheeses made include mozzarella in Italy, karish, mish, and domiati in Egypt, madhfor in Iraq, alghab in Syria, kesong puti in the Philippines, and vladeasa in Romania.
- The semihard cheese beyaz peynir is made in Turkey.
- Hard cheeses include braila in Romania, rahss in Egypt, white brine in Bulgaria, and akkawi in Syria.
- Watered-down buffalo milk is used as a cheaper alternative to regular milk.
MEAT AND SKIN PRODUCTS
Water buffalo meat, sometimes called "carabeef", is often passed off as beef in certain regions, and is also a major source of export revenue for India. In many Asian regions, buffalo meat is less preferred due to its toughness; however, recipes have evolved (rendang, for example) where the slow cooking process and spices not only make the meat palatable, but also preserve it, an important factor in hot climates where refrigeration is not always available.Their hides provide tough and useful leather, often used for shoes.
BONE AND HORN PRODUCTS
The bones and horns are often made into jewellery, especially earrings. Horns are used for the embouchure of musical instruments, such as ney and kaval.
ENVIRONMENTAL EFFECTS
Wildlife conservation scientists have started to recommend and use introduced populations of feral domestic water buffalo in far-away lands to manage uncontrolled vegetation growth in and around natural wetlands. Introduced water buffalo at home in such environs provide cheap service by regularly grazing the uncontrolled vegetation and opening up clogged water bodies for waterfowl, wetland birds, and other wildlife. Grazing water buffalo are sometimes used in Great Britain for conservation grazing, such as in Chippenham Fen National Nature Reserve. The buffalo can better adapt to wet conditions and poor-quality vegetation than cattle.
Currently, research is being conducted at the Lyle Center for Regenerative Studies to determine the levels of nutrients removed and returned to wetlands when water buffalo are used for wetland vegetation management.
However, in uncontrolled circumstances, water buffalo can cause environmental damage, such as trampling vegetation, disturbing bird and reptile nesting sites, and spreading exotic weeds.
RESEARCH
The world's first cloned buffalo was developed by Indian scientists from National Dairy Research Institute, Karnal. The buffalo calf was named Samrupa. The calf did not survive more than a week, and died due to some genetic disorders. So, the scientists created another cloned buffalo a few months later, and named it Garima.
On 15 September 2007, the Philippines announced its development of Southeast Asia's first cloned buffalo. The Philippine Council for Agriculture, Forestry and Natural Resources Research and Development (PCARRD), under the Department of Science and Technology in Los Baños, Laguna, approved this project. The Department of Agriculture's Philippine Carabao Center (PCC) will implement cloning through somatic cell nuclear transfer as a tool for genetic improvement in water buffalo. "Super buffalo calves" will be produced. There will be no modification or alteration of the genetic materials, as in genetically modified organisms.
On 1 January 2008, the Philippine Carabao Center in Nueva Ecija, per Filipino scientists, initiated a study to breed a super water buffalo that could produce 4 to 18 litres of milk per day using gene-based technology. Also, the first in vitro river buffalo was born there in 2004 from an in vitro-produced, vitrified embryo, named "Glory" after President Gloria Macapagal-Arroyo. Joseph Estrada's most successful project as an opposition senator, the PCC was created through Republic Act 3707, the Carabao Act of 1992.
IN CULTURE
Some ethnic groups, such as Batak and Toraja in Indonesia and the Derung in China, use water buffalo or kerbau (called horbo in Batak or tedong in Toraja) as sacrificial animals at several festivals.
- Legend has it that the Chinese philosophical sage Laozi left China through the Han Gu Pass riding a water buffalo.
- According to Hindu lore, the god of death Yama, rides on a male water buffalo.
- The carabao subspecies is considered a national symbol in the Philippines.
- In Vietnam, water buffalo are often the most valuable possession of poor farmers: "Con trâu là đầu cơ nghiệp". They are treated as a member of the family: "Chồng cày, vợ cấy, con trâu đi bừa" ("The husband ploughs, the wife sows, water buffalo draws the rake") and are friends of the children. Children talk to their water buffalo, "Bao giờ cây lúa còn bông. Thì còn ngọn cỏ ngoài đồng trâu ăn." (Vietnamese children are responsible for grazing water buffalo. They feed them grass if they work laboriously for men.) In the old days, West Lake, Hà Nội, was named Kim Ngưu - Golden Water Buffalo.
- The Yoruban Orisha Oya (goddess of change) takes the form of a water buffalo.
FIGHTING FESTIVALS
- Pasungay Festival is held annually in the town of San Joaquin, Iloilo in the Philippines.
- Moh juj Water Buffalo fighting, is held every year in Bhogali Bihu in Assam. Ahotguri in Nagaon is famous for it.
- Do Son Water Buffalo Fighting Festival of Vietnam, held each year on the ninth day of the eighth month of the lunar calendar at Do Son Township, Haiphong City in Vietnam, is one of the most popular Vietnam festivals and events in Haiphong City. The preparations for this buffalo fighting festival begin from the two to three months earlier. The competing buffalo are selected and methodically trained months in advance. It is a traditional festival of Vietnam attached to a Water God worshipping ceremony and the Hien Sinh custom to show martial spirit of the local people of Do Son, Haiphong.
- "Hai Luu" Water Buffalo Fighting Festival of Vietnam, According to ancient records, the buffalo fighting in Hai Luu Commune has existed from the 2nd century B.C. General Lu Gia at that time, had the buffalo slaughtered to give a feast to the local people and the warriors, and organized buffalo fighting for amusement. Eventually, all the fighting buffalo will be slaughtered as tributes to the deities.
- "Ko Samui" Water Buffalo Fighting Festival of Thailand, is a very popular event held on special occasions such as New Year's Day in January, and Songkran in mid-April, this festival features head-wrestling bouts in which two male Asian water buffalo are pitted against one another. Unlike in Spanish Bullfighting, wherein bulls get killed while fighting sword-wielding men, Buffalo Fighting Festival held at Ko Samui, Thailand is fairly harmless contest. The fighting season varies according to ancient customs & ceremonies. The first Buffalo to turn and run away is considered the loser, the winning buffalo becomes worth several million baht. Ko Samui is an island in the Gulf of Thailand in the South China Sea, it is 700 km from Bangkok and is connected to it by regular flights.
- "Ma'Pasilaga Tedong" Water Buffalo Fighting Festival, in Tana Toraja Regency of Sulawesi Island, Indonesia, is a very popular event where the Rambu Solo' or a Burial Festival took place in Tana Toraja.
RACING FESTIVALS
Carabao Carroza Festival is being held annually every May in the town of Pavia, Iloilo, Philippines.
Kambala races of Karnataka, India, take place between December and March. The races are conducted by having the water buffalo (he buffalo) run in long parallel slushy ditches, where they are driven by men standing on wooden planks drawn by the buffalo. The objectives of the race are to finish first and to raise the water to the greatest height and also a rural sport. Kambala races are arranged with competition, as well as without competition and as a part of thanks giving (to god) in about 50 villages of coastal Karnataka.
In the Chonburi Province of Thailand, and in Pakistan, there are annual water buffalo races.
Chon Buri Water buffalo racing festival, Thailand In downtown Chonburi, 70 km south of Bangkok, at the annual water buffalo festival held in mid-October. About 300 buffalo race in groups of five or six, spurred on by bareback jockeys wielding wooden sticks, as hundreds of spectators cheer. The water buffalo has always played an important role in agriculture in Thailand. For farmers of Chon Buri Province, near Bangkok, it is an important annual festival, beginning in mid-October. It is also a celebration among rice farmers before the rice harvest. At dawn, farmers walk their buffalo through surrounding rice fields, splashing them with water to keep them cool before leading them to the race field. This amazing festival started over a hundred years ago when two men arguing about whose buffalo was the fastest ended up having a race between them. That’s how it became a tradition and gradually a social event for farmers who gathered from around the country in Chonburi to trade their goods. The festival also helps a great deal in preserving the number of buffalo, which have been dwindling at quite an alarming rate in other regions. Modern machinery is rapidly replacing buffalo in Thai agriculture. With most of the farm work mechanized, the buffalo-racing tradition has continued. Racing buffalo are now raised just to race; they do not work at all. The few farm buffalo which still do work are much bigger than the racers because of the strenuous work they perform. Farm buffalo are in the "Buffalo Beauty Pageant", a Miss Farmer beauty contest and a comic buffalo costume contest etc.. This festival perfectly exemplifies a favored Thai attitude to life — "sanuk," meaning fun.
Babulang Water buffalo racing festival, Sarawak, Malaysia, is the largest or grandest of the many rituals, ceremonies and festivals of the traditional Bisaya (Borneo) community of Limbang, Sarawak. Highlights are the Ratu Babulang competition and the Water buffalo races which can only be found in this town in Sarawak, Malaysia.
Vihear Suor village Water buffalo racing festival, in Cambodia, each year, people visit Buddhist temples across the country to honor their deceased loved ones during a 15-day period commonly known as the Festival of the Dead but in Vihear Suor village, about 35 km northeast of Cambodia, citizens each year wrap up the festival with a water buffalo race to entertain visitors and honour a pledge made hundreds of years ago. There was a time when many village cattle which provide rural Cambodians with muscle power to plough their fields and transport agricultural products died from an unknown disease. The villagers prayed to a spirit to help save their animals from the disease and promised to show their gratitude by holding a buffalo race each year on the last day of "P'chum Ben" festival as it is known in Cambodian. The race draws hundreds of spectators who come to see riders and their animals charge down the racing field, the racers bouncing up and down on the backs of their buffalo, whose horns were draped with colorful cloth.
Pothu puttu matsaram, Kerala, South India, is similar to Kambala races.
WIKIPEDIA
The water buffalo or domestic Asian water buffalo (Bubalus bubalis) is a large bovid originating in South Asia, Southeast Asia, and China. Today, it is also found in Europe, Australia, and some American countries. The wild water buffalo (Bubalus arnee) native to Southeast Asia is considered a different species, but most likely represents the ancestor of the domestic water buffalo.
Two extant types of water buffalo are recognized based on morphological and behavioural criteria – the river buffalo of South Asia and further west to the Balkans, Egypt, and Italy, and the swamp buffalo, found from Assam in the west through Southeast Asia to the Yangtze valley of China in the east. The origins of the domestic water buffalo types are debated, although results of a phylogenetic study indicate that the swamp type may have originated in China and was domesticated about 4,000 years ago, while the river type may have originated from India and was domesticated about 5,000 years ago. Water buffalo were traded from the Indus Valley Civilisation to Mesopotamia, in modern Iraq, 2500 BC by the Meluhhas. The seal of a scribe employed by an Akkadian king shows the sacrifice of water buffalo.
At least 130 million domestic water buffalo exist, and more human beings depend on them than on any other domestic animal. They are especially suitable for tilling rice fields, and their milk is richer in fat and protein than that of dairy cattle. The large feral population of northern Australia became established in the late 19th century, and smaller feral herds are in New Guinea, Tunisia, and northeastern Argentina. Feral herds are also present in New Britain, New Ireland, Irian Jaya, Papua New Guinea, Colombia, Guyana, Suriname, Brazil, and Uruguay.
CHARACTERISTICS
The skin of river buffalo is black, but some specimens may have dark, slate-coloured skin. Swamp buffalo have a grey skin at birth, but become slate blue later. Albinoids are present in some populations. River buffalo have comparatively longer faces, smaller girths, and bigger limbs than swamp buffalo. Their dorsal ridges extend further back and taper off more gradually. Their horns grow downward and backward, then curve upward in a spiral. Swamp buffalo are heavy-bodied and stockily built; the body is short and the belly large. The forehead is flat, the eyes prominent, the face short, and the muzzle wide. The neck is comparatively long, and the withers and croup are prominent. A dorsal ridge extends backward and ends abruptly just before the end of the chest. Their horns grow outward, and curve in a semicircle, but always remain more or less on the plane of the forehead. The tail is short, reaching only to the hocks. Height at withers is 129–133 cm for males, and 120–127 cm for females. They range in weight from 300–550 kg, but weights of over 1,000 kg have also been observed.
Tedong bonga is a black pied buffalo featuring a unique black and white colouration that is favoured by the Toraja of Sulawesi.
The swamp buffalo has 48 chromosomes; the river buffalo has 50 chromosomes. The two types do not readily interbreed, but fertile offspring can occur. Buffalo-cattle hybrids have not been observed to occur, and the embryos of such hybrids do not reach maturity in laboratory experiments.
The rumen of the water buffalo has important differences from that of other ruminants. It contains a larger population of bacteria, particularly the cellulolytic bacteria, lower protozoa, and higher fungi zoospores. In addition, higher rumen ammonia nitrogen (NH4-N) and higher pH have been found as compared to those in cattle
ECOLOGY AND BEHAVIOR
River buffalo prefer deep water. Swamp buffalo prefer to wallow in mudholes which they make with their horns. During wallowing, they acquire a thick coating of mud. Both are well adapted to a hot and humid climate with temperatures ranging from 0 °C in the winter to 30 °C and greater in the summer. Water availability is important in hot climates, since they need wallows, rivers, or splashing water to assist in thermoregulation. Some breeds are adapted to saline seaside shores and saline sandy terrain.
DIET
Water buffalo thrive on many aquatic plants and during floods, will graze submerged, raising their heads above the water and carrying quantities of edible plants. They eat reeds (quassab), a giant reed (birdi), a kind of bulrush (kaulan), water hyacinth, and marsh grasses. Some of these plants are of great value to local peoples. Others, such as water hyacinth, are a major problem in some tropical valleys, and water buffalo may help to keep waterways clear.
Green fodders are used widely for intensive milk production and for fattening. Many fodder crops are conserved as hay, chaffed, or pulped. Fodders include alfalfa, berseem and bancheri, the leaves, stems or trimmings of banana, cassava, fodder beet, halfa, ipil-ipil and kenaf, maize, oats, pandarus, peanut, sorghum, soybean, sugarcane, bagasse, and turnips. Citrus pulp and pineapple wastes have been fed safely to buffalo. In Egypt, whole sun-dried dates are fed to milk-buffalo up to 25% of the standard feed mixture.
REPRODUCTION
Swamp buffalo generally become reproductive at an older age than river breeds. Young males in Egypt, India, and Pakistan are first mated at about 3.0–3.5 years of age, but in Italy
they may be used as early as 2 years of age. Successful mating behaviour may continue until the animal is 12 years or even older. A good river male can impregnate 100 females in a year. A strong seasonal influence on mating occurs. Heat stress reduces libido
Although buffalo are polyoestrous, their reproductive efficiency shows wide variation throughout the year. Buffalo cows exhibit a distinct seasonal change in displaying oestrus, conception rate, and calving rate. The age at first oestrus of heifers varies between breeds from 13–33 months, but mating at the first oestrus is often infertile and usually deferred until they are 3 years old. Gestation lasts from 281–334 days, but most reports give a range between 300 and 320 days. Swamp buffalo carry their calves for one or two weeks longer than river buffalo. It is not rare to find buffalo that continue to work well at the age of 30, and instances of a working life of 40 years are recorded.
TAXONOMIC HISTORY
Carl Linnaeus first described the genus Bos and the water buffalo under the binomial Bubalis bubalus in 1758; the latter was known to occur in Asia and as a domestic form in Italy. Ellerman and Morrison-Scott treated the wild and domestic forms of the water buffalo as conspecifics whereas others treated them as different species. The nomenclatorial treatment of wild and domestic forms has been inconsistent and varies between authors and even within the works of single authors.
In March 2003, the International Commission on Zoological Nomenclature achieved consistency in the naming of wild and domestic water buffalo by ruling that the scientific name Bubalus arnee is valid for the wild form. B. bubalis continues to be valid for the domestic form and applies also to feral populations.
DOMESTICATION AND BREEDING
Water buffalo were domesticated in India about 5000 years ago, and in China about 4000 years ago. Two types are recognized, based on morphological and behavioural criteria – the river buffalo of the Indian subcontinent and further west to the Balkans and Italy, and the swamp buffalo, found from Assam in the west through Southeast Asia to the Yangtze valley of China in the east. The present-day river buffalo is the result of complex domestication processes involving more than one maternal lineage and a significant maternal gene flow from wild populations after the initial domestication events. Twenty-two breeds of the river type water buffalo are known, including Murrah, Nili-Ravi, Surti, Jafarabadi, Anatolian, Mediterranean, and Egyptian buffalo. China has a huge variety of buffalo genetic resources, comprising 16 local swamp buffalo breeds in various regions.
Results of mitochondrial DNA analyses indicate that the two types were domesticated independently. Sequencing of cytochrome b genes of Bubalus species implies that the domestic buffalo originated from at least two populations, and that the river and the swamp types have differentiated at the full species level. The genetic distance between the two types is so large that a divergence time of about 1.7 million years has been suggested. The swamp type was noticed to have the closest relationship with the tamaraw.
DISTRIBUTION OF POPULATIONS
The water buffalo population in the world is about 172 million.
IN ASIA
More than 95.8% of the world population of water buffalo are found in Asia including both river and swamp types. The water buffalo population in India numbered over 97.9 million head in 2003, representing 56.5% of the world population. They are primarily of the river type, with 10 well-defined breeds comprising Badhawari, Murrah, Nili-Ravi, Jafarabadi, Marathwada, Mehsana, Nagpuri, Pandharpuri, Toda, and Surti. Swamp buffalo occur only in small areas in the north-eastern part of the country and are not distinguished into breeds.
In 2003, the second-largest population lived in China, with 22.759 million head, all of the swamp type with breeds kept only in the lowlands, and other breeds kept only in the mountains; as of 2003, 3.2 million swamp-type carabao buffalo were in the Philippines, nearly three million swamp buffalo were in Vietnam, and 772,764 buffalo were in Bangladesh. About 750,000 head were estimated in Sri Lanka in 1997.
The water buffalo is the main dairy animal in Pakistan, with 23.47 million head in 2010. Of these, 76% are kept in the Punjab. The rest of them are mostly in the province of Sindh. Breeds used are Nili-Ravi, Kundi, and Azi Kheli. Karachi has the largest population of water buffalos for an area where fodder is not grown, consisting of 350,000 head kept mainly for milking.
In Thailand, the number of water buffalo dropped from more than 3 million head in 1996 to less than 1.24 million head in 2011. Slightly over 75% of them are kept in the country's northeastern region. The statistics also indicate that by the beginning of 2012, less than one million were in the country, partly as a result of illegal shipments to neighboring countries where sales prices are higher than in Thailand.
Water buffalo are also present in the southern region of Iraq, in the marshes. These marshes were drained by Saddam Hussein in 1991 in an attempt to punish the south for the uprisings of 1991. Following 2003, and the fall of the Saddam regime, these lands were reflooded and a 2007 report in the provinces of Maysan and Thi Qar shows a steady increase in the number of water buffalo. The report puts the number at 40,008 head in those two provinces.
IN EUROPE AND THE MEDITERRANEAN
Water buffalo likely were introduced to Europe from India or other Oriental countries. To Italy they were introduced about the year 600 in the reign of the Longobard King Agilulf. As they appear in the company of wild horses, they probably were a present from the Khan of the Avars, a Turkic nomadic tribe that dwelt near the Danube River at the time. Sir H. Johnston knew of a herd of water buffalo presented by a King of Naples to the Bey of Tunis in the mid-19th century that had resumed the feral state in northern Tunis.
European buffalo are all of the river type and considered to be of the same breed named Mediterranean buffalo. In Italy, the Mediterranean type was particularly selected and is called Mediterranean Italian breed to distinguish it from other European breeds, which differ genetically. Mediterranean buffalo are also found in Romania, Bulgaria, Greece, Albania, Kosovo, and the Republic of Macedonia, with a few hundred in the United Kingdom, Germany, the Netherlands, Switzerland, and Hungary. Little exchange of breeding buffalo has occurred among countries, so each population has its own phenotypic features and performances. In Bulgaria, they were crossbred with the Indian Murrah breed, and in Romania, some were crossbred with Bulgarian Murrah. Populations in Turkey are of the Anatolian buffalo breed.
IN AUSTRALIA
Between 1824 and 1849, water buffalo were introduced into the Northern Territory from Timor, Kisar, and probably other islands in the Indonesian archipelago. In 1886, a few milking types were brought from India to Darwin. They have been the main grazing animals on the subcoastal plains and river basins between Darwin and Arnhem Land since the 1880s. In the early 1960s, an estimated population of 150,000 to 200,000 buffalo were living in the plains and nearby areas.
They became feral and are causing significant environmental damage. Buffalo are also found in the Top End. As a result, they were hunted in the Top End from 1885 until 1980. The commencement of the brucellosis and tuberculosis campaign (BTEC) resulted in a huge culling program to reduce buffalo herds to a fraction of the numbers that were reached in the 1980s. The BTEC was finished when the Northern Territory was declared free of the disease in 1997. Numbers dropped dramatically as a result of the campaign, but have since recovered to an estimated 150,000 animals across northern Australia in 2008.
During the 1950s, buffalo were hunted for their skins and meat, which was exported and used in the local trade. In the late 1970s, live exports were made to Cuba and continued later into other countries. Buffalo are now crossed with riverine buffalo in artificial insemination programs, and may be found in many areas of Australia. Some of these crossbreds are used for milk production. Melville Island is a popular hunting location, where a steady population up to 4,000 individuals exists. Safari outfits are run from Darwin to Melville Island and other locations in the Top End, often with the use of bush pilots. The horns, which can measure up to a record of 3.1 m tip-to-tip, are prized hunting trophies.
The buffalo have developed a different appearance from the Indonesian buffalo from which they descend. They live mainly in freshwater marshes and billabongs, and their territory range can be quite expansive during the wet season. Their only natural predators in Australia are adult saltwater crocodiles, with whom they share the billabongs, and dingoes, which have been known to prey on buffalo calves and occasionally adult buffalo when the dingoes are in large packs.
Buffalo were exported live to Indonesia until 2011, at a rate of about 3000 per year. After the live export ban that year, the exports dropped to zero, and had not resumed as of June 2013.
IN SOUTH AMERICA
Water buffalo were introduced into the Amazon River basin in 1895. They are now extensively used there for meat and dairy production. In 2005, the buffalo herd in the Brazilian Amazon stood at roughly 1.6 million head, of which 460,000 were located in the lower Amazon floodplain. Breeds used include Mediterranean from Italy, Murrah and Jafarabadi from India, and Carabao from the Philippines.
During the 1970s, small herds were imported to Costa Rica, Ecuador, Cayenne, Panama, Surinam, Guyana, and Venezuela.
In Argentina, many game ranches raise water buffalo for commercial hunting
IN NORTH AMERICA
In 1974, four water buffalo were imported to the United States from Guam to be studied at the University of Florida. In February 1978, the first herd arrived for commercial farming. Until 2002, only one commercial breeder was in the United States. Water buffalo meat is imported from Australia. Until 2011, water buffalo were raised in Gainesville, Florida, from young obtained from zoo overflow. They were used primarily for meat production, frequently sold as hamburger.[38] Other US ranchers use them for production of high-quality mozzarella cheese.
HUSBANDRY
The husbandry system of water buffalo depends on the purpose for which they are bred and maintained. Most of them are kept by people who work on small farms in family units. Their buffalo live in very close association with them, and are often their greatest capital asset. The women and girls in India generally look after the milking buffalo while the men and boys are concerned with the working animals. Throughout Asia, they are commonly tended by children who are often seen leading or riding their charges to wallowing places. Water buffalo are the ideal animals for work in the deep mud of paddy fields because of their large hooves and flexible foot joints. They are often referred to as "the living tractor of the East". It probably is possible to plough deeper with buffalo than with either oxen or horses. They are the most efficient and economical means of cultivation of small fields. In most rice-producing countries, they are used for threshing and for transporting the sheaves during the rice harvest. They provide power for oilseed mills, sugarcane presses, and devices for raising water. They are widely used as pack animals, and in India and Pakistan also for heavy haulage. In their invasions of Europe, the Turks used buffalo for hauling heavy battering rams. Their dung is used as a fertilizer, and as a fuel when dried.
Buffalo contribute 72 million tones of milk and three million tones of meat annually to world food, much of it in areas that are prone to nutritional imbalances. In India, river-type buffalo are kept mainly for milk production and for transport, whereas swamp-type buffalo are kept mainly for work and a small amount of milk.
DAIRY PRODUCTS
Water buffalo milk presents physicochemical features different from that of other ruminant species, such as a higher content of fatty acids and proteins. The physical and chemical parameters of swamp and river type water buffalo milk differ. Water buffalo milk contains higher levels of total solids, crude protein, fat, calcium, and phosphorus, and slightly higher content of lactose compared with those of cow milk. The high level of total solids makes water buffalo milk ideal for processing into value-added dairy products such as cheese. The conjugated linoleic acid (CLA) content in milk ranged from 4.4 mg/g fat in September to 7.6 mg/g fat in June. Seasons and genetics may play a role in variation of CLA level and changes in gross composition of the water buffalo milk.
Water buffalo milk is processed into a large variety of dairy products:
- Cream churns much faster at higher fat levels and gives higher overrun than cow cream.
- Butter from water buffalo cream displays more stability than that from cow cream.
- Ghee from water buffalo milk has a different texture with a bigger grain size than ghee from cow milk.
- Heat-concentrated milk products in the Indian subcontinent include paneer, khoa, rabri, kheer and basundi.
- Fermented milk products include dahi, yogurt, and chakka.
- Whey is used for making ricotta and mascarpone in Italy, and alkarish in Syria and Egypt.
- Soft cheeses made include mozzarella in Italy, karish, mish, and domiati in Egypt, madhfor in Iraq, alghab in Syria, kesong puti in the Philippines, and vladeasa in Romania.
- The semihard cheese beyaz peynir is made in Turkey.
- Hard cheeses include braila in Romania, rahss in Egypt, white brine in Bulgaria, and akkawi in Syria.
- Watered-down buffalo milk is used as a cheaper alternative to regular milk.
MEAT AND SKIN PRODUCTS
Water buffalo meat, sometimes called "carabeef", is often passed off as beef in certain regions, and is also a major source of export revenue for India. In many Asian regions, buffalo meat is less preferred due to its toughness; however, recipes have evolved (rendang, for example) where the slow cooking process and spices not only make the meat palatable, but also preserve it, an important factor in hot climates where refrigeration is not always available.Their hides provide tough and useful leather, often used for shoes.
BONE AND HORN PRODUCTS
The bones and horns are often made into jewellery, especially earrings. Horns are used for the embouchure of musical instruments, such as ney and kaval.
ENVIRONMENTAL EFFECTS
Wildlife conservation scientists have started to recommend and use introduced populations of feral domestic water buffalo in far-away lands to manage uncontrolled vegetation growth in and around natural wetlands. Introduced water buffalo at home in such environs provide cheap service by regularly grazing the uncontrolled vegetation and opening up clogged water bodies for waterfowl, wetland birds, and other wildlife. Grazing water buffalo are sometimes used in Great Britain for conservation grazing, such as in Chippenham Fen National Nature Reserve. The buffalo can better adapt to wet conditions and poor-quality vegetation than cattle.
Currently, research is being conducted at the Lyle Center for Regenerative Studies to determine the levels of nutrients removed and returned to wetlands when water buffalo are used for wetland vegetation management.
However, in uncontrolled circumstances, water buffalo can cause environmental damage, such as trampling vegetation, disturbing bird and reptile nesting sites, and spreading exotic weeds.
RESEARCH
The world's first cloned buffalo was developed by Indian scientists from National Dairy Research Institute, Karnal. The buffalo calf was named Samrupa. The calf did not survive more than a week, and died due to some genetic disorders. So, the scientists created another cloned buffalo a few months later, and named it Garima.
On 15 September 2007, the Philippines announced its development of Southeast Asia's first cloned buffalo. The Philippine Council for Agriculture, Forestry and Natural Resources Research and Development (PCARRD), under the Department of Science and Technology in Los Baños, Laguna, approved this project. The Department of Agriculture's Philippine Carabao Center (PCC) will implement cloning through somatic cell nuclear transfer as a tool for genetic improvement in water buffalo. "Super buffalo calves" will be produced. There will be no modification or alteration of the genetic materials, as in genetically modified organisms.
On 1 January 2008, the Philippine Carabao Center in Nueva Ecija, per Filipino scientists, initiated a study to breed a super water buffalo that could produce 4 to 18 litres of milk per day using gene-based technology. Also, the first in vitro river buffalo was born there in 2004 from an in vitro-produced, vitrified embryo, named "Glory" after President Gloria Macapagal-Arroyo. Joseph Estrada's most successful project as an opposition senator, the PCC was created through Republic Act 3707, the Carabao Act of 1992.
IN CULTURE
Some ethnic groups, such as Batak and Toraja in Indonesia and the Derung in China, use water buffalo or kerbau (called horbo in Batak or tedong in Toraja) as sacrificial animals at several festivals.
- Legend has it that the Chinese philosophical sage Laozi left China through the Han Gu Pass riding a water buffalo.
- According to Hindu lore, the god of death Yama, rides on a male water buffalo.
- The carabao subspecies is considered a national symbol in the Philippines.
- In Vietnam, water buffalo are often the most valuable possession of poor farmers: "Con trâu là đầu cơ nghiệp". They are treated as a member of the family: "Chồng cày, vợ cấy, con trâu đi bừa" ("The husband ploughs, the wife sows, water buffalo draws the rake") and are friends of the children. Children talk to their water buffalo, "Bao giờ cây lúa còn bông. Thì còn ngọn cỏ ngoài đồng trâu ăn." (Vietnamese children are responsible for grazing water buffalo. They feed them grass if they work laboriously for men.) In the old days, West Lake, Hà Nội, was named Kim Ngưu - Golden Water Buffalo.
- The Yoruban Orisha Oya (goddess of change) takes the form of a water buffalo.
FIGHTING FESTIVALS
- Pasungay Festival is held annually in the town of San Joaquin, Iloilo in the Philippines.
- Moh juj Water Buffalo fighting, is held every year in Bhogali Bihu in Assam. Ahotguri in Nagaon is famous for it.
- Do Son Water Buffalo Fighting Festival of Vietnam, held each year on the ninth day of the eighth month of the lunar calendar at Do Son Township, Haiphong City in Vietnam, is one of the most popular Vietnam festivals and events in Haiphong City. The preparations for this buffalo fighting festival begin from the two to three months earlier. The competing buffalo are selected and methodically trained months in advance. It is a traditional festival of Vietnam attached to a Water God worshipping ceremony and the Hien Sinh custom to show martial spirit of the local people of Do Son, Haiphong.
- "Hai Luu" Water Buffalo Fighting Festival of Vietnam, According to ancient records, the buffalo fighting in Hai Luu Commune has existed from the 2nd century B.C. General Lu Gia at that time, had the buffalo slaughtered to give a feast to the local people and the warriors, and organized buffalo fighting for amusement. Eventually, all the fighting buffalo will be slaughtered as tributes to the deities.
- "Ko Samui" Water Buffalo Fighting Festival of Thailand, is a very popular event held on special occasions such as New Year's Day in January, and Songkran in mid-April, this festival features head-wrestling bouts in which two male Asian water buffalo are pitted against one another. Unlike in Spanish Bullfighting, wherein bulls get killed while fighting sword-wielding men, Buffalo Fighting Festival held at Ko Samui, Thailand is fairly harmless contest. The fighting season varies according to ancient customs & ceremonies. The first Buffalo to turn and run away is considered the loser, the winning buffalo becomes worth several million baht. Ko Samui is an island in the Gulf of Thailand in the South China Sea, it is 700 km from Bangkok and is connected to it by regular flights.
- "Ma'Pasilaga Tedong" Water Buffalo Fighting Festival, in Tana Toraja Regency of Sulawesi Island, Indonesia, is a very popular event where the Rambu Solo' or a Burial Festival took place in Tana Toraja.
RACING FESTIVALS
Carabao Carroza Festival is being held annually every May in the town of Pavia, Iloilo, Philippines.
Kambala races of Karnataka, India, take place between December and March. The races are conducted by having the water buffalo (he buffalo) run in long parallel slushy ditches, where they are driven by men standing on wooden planks drawn by the buffalo. The objectives of the race are to finish first and to raise the water to the greatest height and also a rural sport. Kambala races are arranged with competition, as well as without competition and as a part of thanks giving (to god) in about 50 villages of coastal Karnataka.
In the Chonburi Province of Thailand, and in Pakistan, there are annual water buffalo races.
Chon Buri Water buffalo racing festival, Thailand In downtown Chonburi, 70 km south of Bangkok, at the annual water buffalo festival held in mid-October. About 300 buffalo race in groups of five or six, spurred on by bareback jockeys wielding wooden sticks, as hundreds of spectators cheer. The water buffalo has always played an important role in agriculture in Thailand. For farmers of Chon Buri Province, near Bangkok, it is an important annual festival, beginning in mid-October. It is also a celebration among rice farmers before the rice harvest. At dawn, farmers walk their buffalo through surrounding rice fields, splashing them with water to keep them cool before leading them to the race field. This amazing festival started over a hundred years ago when two men arguing about whose buffalo was the fastest ended up having a race between them. That’s how it became a tradition and gradually a social event for farmers who gathered from around the country in Chonburi to trade their goods. The festival also helps a great deal in preserving the number of buffalo, which have been dwindling at quite an alarming rate in other regions. Modern machinery is rapidly replacing buffalo in Thai agriculture. With most of the farm work mechanized, the buffalo-racing tradition has continued. Racing buffalo are now raised just to race; they do not work at all. The few farm buffalo which still do work are much bigger than the racers because of the strenuous work they perform. Farm buffalo are in the "Buffalo Beauty Pageant", a Miss Farmer beauty contest and a comic buffalo costume contest etc.. This festival perfectly exemplifies a favored Thai attitude to life — "sanuk," meaning fun.
Babulang Water buffalo racing festival, Sarawak, Malaysia, is the largest or grandest of the many rituals, ceremonies and festivals of the traditional Bisaya (Borneo) community of Limbang, Sarawak. Highlights are the Ratu Babulang competition and the Water buffalo races which can only be found in this town in Sarawak, Malaysia.
Vihear Suor village Water buffalo racing festival, in Cambodia, each year, people visit Buddhist temples across the country to honor their deceased loved ones during a 15-day period commonly known as the Festival of the Dead but in Vihear Suor village, about 35 km northeast of Cambodia, citizens each year wrap up the festival with a water buffalo race to entertain visitors and honour a pledge made hundreds of years ago. There was a time when many village cattle which provide rural Cambodians with muscle power to plough their fields and transport agricultural products died from an unknown disease. The villagers prayed to a spirit to help save their animals from the disease and promised to show their gratitude by holding a buffalo race each year on the last day of "P'chum Ben" festival as it is known in Cambodian. The race draws hundreds of spectators who come to see riders and their animals charge down the racing field, the racers bouncing up and down on the backs of their buffalo, whose horns were draped with colorful cloth.
Pothu puttu matsaram, Kerala, South India, is similar to Kambala races.
WIKIPEDIA
The water buffalo or domestic Asian water buffalo (Bubalus bubalis) is a large bovid originating in South Asia, Southeast Asia, and China. Today, it is also found in Europe, Australia, and some American countries. The wild water buffalo (Bubalus arnee) native to Southeast Asia is considered a different species, but most likely represents the ancestor of the domestic water buffalo.
Two extant types of water buffalo are recognized based on morphological and behavioural criteria – the river buffalo of South Asia and further west to the Balkans, Egypt, and Italy, and the swamp buffalo, found from Assam in the west through Southeast Asia to the Yangtze valley of China in the east. The origins of the domestic water buffalo types are debated, although results of a phylogenetic study indicate that the swamp type may have originated in China and was domesticated about 4,000 years ago, while the river type may have originated from India and was domesticated about 5,000 years ago. Water buffalo were traded from the Indus Valley Civilisation to Mesopotamia, in modern Iraq, 2500 BC by the Meluhhas. The seal of a scribe employed by an Akkadian king shows the sacrifice of water buffalo.
At least 130 million domestic water buffalo exist, and more human beings depend on them than on any other domestic animal. They are especially suitable for tilling rice fields, and their milk is richer in fat and protein than that of dairy cattle. The large feral population of northern Australia became established in the late 19th century, and smaller feral herds are in New Guinea, Tunisia, and northeastern Argentina. Feral herds are also present in New Britain, New Ireland, Irian Jaya, Papua New Guinea, Colombia, Guyana, Suriname, Brazil, and Uruguay.
CHARACTERISTICS
The skin of river buffalo is black, but some specimens may have dark, slate-coloured skin. Swamp buffalo have a grey skin at birth, but become slate blue later. Albinoids are present in some populations. River buffalo have comparatively longer faces, smaller girths, and bigger limbs than swamp buffalo. Their dorsal ridges extend further back and taper off more gradually. Their horns grow downward and backward, then curve upward in a spiral. Swamp buffalo are heavy-bodied and stockily built; the body is short and the belly large. The forehead is flat, the eyes prominent, the face short, and the muzzle wide. The neck is comparatively long, and the withers and croup are prominent. A dorsal ridge extends backward and ends abruptly just before the end of the chest. Their horns grow outward, and curve in a semicircle, but always remain more or less on the plane of the forehead. The tail is short, reaching only to the hocks. Height at withers is 129–133 cm for males, and 120–127 cm for females. They range in weight from 300–550 kg, but weights of over 1,000 kg have also been observed.
Tedong bonga is a black pied buffalo featuring a unique black and white colouration that is favoured by the Toraja of Sulawesi.
The swamp buffalo has 48 chromosomes; the river buffalo has 50 chromosomes. The two types do not readily interbreed, but fertile offspring can occur. Buffalo-cattle hybrids have not been observed to occur, and the embryos of such hybrids do not reach maturity in laboratory experiments.
The rumen of the water buffalo has important differences from that of other ruminants. It contains a larger population of bacteria, particularly the cellulolytic bacteria, lower protozoa, and higher fungi zoospores. In addition, higher rumen ammonia nitrogen (NH4-N) and higher pH have been found as compared to those in cattle
ECOLOGY AND BEHAVIOR
River buffalo prefer deep water. Swamp buffalo prefer to wallow in mudholes which they make with their horns. During wallowing, they acquire a thick coating of mud. Both are well adapted to a hot and humid climate with temperatures ranging from 0 °C in the winter to 30 °C and greater in the summer. Water availability is important in hot climates, since they need wallows, rivers, or splashing water to assist in thermoregulation. Some breeds are adapted to saline seaside shores and saline sandy terrain.
DIET
Water buffalo thrive on many aquatic plants and during floods, will graze submerged, raising their heads above the water and carrying quantities of edible plants. They eat reeds (quassab), a giant reed (birdi), a kind of bulrush (kaulan), water hyacinth, and marsh grasses. Some of these plants are of great value to local peoples. Others, such as water hyacinth, are a major problem in some tropical valleys, and water buffalo may help to keep waterways clear.
Green fodders are used widely for intensive milk production and for fattening. Many fodder crops are conserved as hay, chaffed, or pulped. Fodders include alfalfa, berseem and bancheri, the leaves, stems or trimmings of banana, cassava, fodder beet, halfa, ipil-ipil and kenaf, maize, oats, pandarus, peanut, sorghum, soybean, sugarcane, bagasse, and turnips. Citrus pulp and pineapple wastes have been fed safely to buffalo. In Egypt, whole sun-dried dates are fed to milk-buffalo up to 25% of the standard feed mixture.
REPRODUCTION
Swamp buffalo generally become reproductive at an older age than river breeds. Young males in Egypt, India, and Pakistan are first mated at about 3.0–3.5 years of age, but in Italy
they may be used as early as 2 years of age. Successful mating behaviour may continue until the animal is 12 years or even older. A good river male can impregnate 100 females in a year. A strong seasonal influence on mating occurs. Heat stress reduces libido
Although buffalo are polyoestrous, their reproductive efficiency shows wide variation throughout the year. Buffalo cows exhibit a distinct seasonal change in displaying oestrus, conception rate, and calving rate. The age at first oestrus of heifers varies between breeds from 13–33 months, but mating at the first oestrus is often infertile and usually deferred until they are 3 years old. Gestation lasts from 281–334 days, but most reports give a range between 300 and 320 days. Swamp buffalo carry their calves for one or two weeks longer than river buffalo. It is not rare to find buffalo that continue to work well at the age of 30, and instances of a working life of 40 years are recorded.
TAXONOMIC HISTORY
Carl Linnaeus first described the genus Bos and the water buffalo under the binomial Bubalis bubalus in 1758; the latter was known to occur in Asia and as a domestic form in Italy. Ellerman and Morrison-Scott treated the wild and domestic forms of the water buffalo as conspecifics whereas others treated them as different species. The nomenclatorial treatment of wild and domestic forms has been inconsistent and varies between authors and even within the works of single authors.
In March 2003, the International Commission on Zoological Nomenclature achieved consistency in the naming of wild and domestic water buffalo by ruling that the scientific name Bubalus arnee is valid for the wild form. B. bubalis continues to be valid for the domestic form and applies also to feral populations.
DOMESTICATION AND BREEDING
Water buffalo were domesticated in India about 5000 years ago, and in China about 4000 years ago. Two types are recognized, based on morphological and behavioural criteria – the river buffalo of the Indian subcontinent and further west to the Balkans and Italy, and the swamp buffalo, found from Assam in the west through Southeast Asia to the Yangtze valley of China in the east. The present-day river buffalo is the result of complex domestication processes involving more than one maternal lineage and a significant maternal gene flow from wild populations after the initial domestication events. Twenty-two breeds of the river type water buffalo are known, including Murrah, Nili-Ravi, Surti, Jafarabadi, Anatolian, Mediterranean, and Egyptian buffalo. China has a huge variety of buffalo genetic resources, comprising 16 local swamp buffalo breeds in various regions.
Results of mitochondrial DNA analyses indicate that the two types were domesticated independently. Sequencing of cytochrome b genes of Bubalus species implies that the domestic buffalo originated from at least two populations, and that the river and the swamp types have differentiated at the full species level. The genetic distance between the two types is so large that a divergence time of about 1.7 million years has been suggested. The swamp type was noticed to have the closest relationship with the tamaraw.
DISTRIBUTION OF POPULATIONS
The water buffalo population in the world is about 172 million.
IN ASIA
More than 95.8% of the world population of water buffalo are found in Asia including both river and swamp types. The water buffalo population in India numbered over 97.9 million head in 2003, representing 56.5% of the world population. They are primarily of the river type, with 10 well-defined breeds comprising Badhawari, Murrah, Nili-Ravi, Jafarabadi, Marathwada, Mehsana, Nagpuri, Pandharpuri, Toda, and Surti. Swamp buffalo occur only in small areas in the north-eastern part of the country and are not distinguished into breeds.
In 2003, the second-largest population lived in China, with 22.759 million head, all of the swamp type with breeds kept only in the lowlands, and other breeds kept only in the mountains; as of 2003, 3.2 million swamp-type carabao buffalo were in the Philippines, nearly three million swamp buffalo were in Vietnam, and 772,764 buffalo were in Bangladesh. About 750,000 head were estimated in Sri Lanka in 1997.
The water buffalo is the main dairy animal in Pakistan, with 23.47 million head in 2010. Of these, 76% are kept in the Punjab. The rest of them are mostly in the province of Sindh. Breeds used are Nili-Ravi, Kundi, and Azi Kheli. Karachi has the largest population of water buffalos for an area where fodder is not grown, consisting of 350,000 head kept mainly for milking.
In Thailand, the number of water buffalo dropped from more than 3 million head in 1996 to less than 1.24 million head in 2011. Slightly over 75% of them are kept in the country's northeastern region. The statistics also indicate that by the beginning of 2012, less than one million were in the country, partly as a result of illegal shipments to neighboring countries where sales prices are higher than in Thailand.
Water buffalo are also present in the southern region of Iraq, in the marshes. These marshes were drained by Saddam Hussein in 1991 in an attempt to punish the south for the uprisings of 1991. Following 2003, and the fall of the Saddam regime, these lands were reflooded and a 2007 report in the provinces of Maysan and Thi Qar shows a steady increase in the number of water buffalo. The report puts the number at 40,008 head in those two provinces.
IN EUROPE AND THE MEDITERRANEAN
Water buffalo likely were introduced to Europe from India or other Oriental countries. To Italy they were introduced about the year 600 in the reign of the Longobard King Agilulf. As they appear in the company of wild horses, they probably were a present from the Khan of the Avars, a Turkic nomadic tribe that dwelt near the Danube River at the time. Sir H. Johnston knew of a herd of water buffalo presented by a King of Naples to the Bey of Tunis in the mid-19th century that had resumed the feral state in northern Tunis.
European buffalo are all of the river type and considered to be of the same breed named Mediterranean buffalo. In Italy, the Mediterranean type was particularly selected and is called Mediterranean Italian breed to distinguish it from other European breeds, which differ genetically. Mediterranean buffalo are also found in Romania, Bulgaria, Greece, Albania, Kosovo, and the Republic of Macedonia, with a few hundred in the United Kingdom, Germany, the Netherlands, Switzerland, and Hungary. Little exchange of breeding buffalo has occurred among countries, so each population has its own phenotypic features and performances. In Bulgaria, they were crossbred with the Indian Murrah breed, and in Romania, some were crossbred with Bulgarian Murrah. Populations in Turkey are of the Anatolian buffalo breed.
IN AUSTRALIA
Between 1824 and 1849, water buffalo were introduced into the Northern Territory from Timor, Kisar, and probably other islands in the Indonesian archipelago. In 1886, a few milking types were brought from India to Darwin. They have been the main grazing animals on the subcoastal plains and river basins between Darwin and Arnhem Land since the 1880s. In the early 1960s, an estimated population of 150,000 to 200,000 buffalo were living in the plains and nearby areas.
They became feral and are causing significant environmental damage. Buffalo are also found in the Top End. As a result, they were hunted in the Top End from 1885 until 1980. The commencement of the brucellosis and tuberculosis campaign (BTEC) resulted in a huge culling program to reduce buffalo herds to a fraction of the numbers that were reached in the 1980s. The BTEC was finished when the Northern Territory was declared free of the disease in 1997. Numbers dropped dramatically as a result of the campaign, but have since recovered to an estimated 150,000 animals across northern Australia in 2008.
During the 1950s, buffalo were hunted for their skins and meat, which was exported and used in the local trade. In the late 1970s, live exports were made to Cuba and continued later into other countries. Buffalo are now crossed with riverine buffalo in artificial insemination programs, and may be found in many areas of Australia. Some of these crossbreds are used for milk production. Melville Island is a popular hunting location, where a steady population up to 4,000 individuals exists. Safari outfits are run from Darwin to Melville Island and other locations in the Top End, often with the use of bush pilots. The horns, which can measure up to a record of 3.1 m tip-to-tip, are prized hunting trophies.
The buffalo have developed a different appearance from the Indonesian buffalo from which they descend. They live mainly in freshwater marshes and billabongs, and their territory range can be quite expansive during the wet season. Their only natural predators in Australia are adult saltwater crocodiles, with whom they share the billabongs, and dingoes, which have been known to prey on buffalo calves and occasionally adult buffalo when the dingoes are in large packs.
Buffalo were exported live to Indonesia until 2011, at a rate of about 3000 per year. After the live export ban that year, the exports dropped to zero, and had not resumed as of June 2013.
IN SOUTH AMERICA
Water buffalo were introduced into the Amazon River basin in 1895. They are now extensively used there for meat and dairy production. In 2005, the buffalo herd in the Brazilian Amazon stood at roughly 1.6 million head, of which 460,000 were located in the lower Amazon floodplain. Breeds used include Mediterranean from Italy, Murrah and Jafarabadi from India, and Carabao from the Philippines.
During the 1970s, small herds were imported to Costa Rica, Ecuador, Cayenne, Panama, Surinam, Guyana, and Venezuela.
In Argentina, many game ranches raise water buffalo for commercial hunting
IN NORTH AMERICA
In 1974, four water buffalo were imported to the United States from Guam to be studied at the University of Florida. In February 1978, the first herd arrived for commercial farming. Until 2002, only one commercial breeder was in the United States. Water buffalo meat is imported from Australia. Until 2011, water buffalo were raised in Gainesville, Florida, from young obtained from zoo overflow. They were used primarily for meat production, frequently sold as hamburger.[38] Other US ranchers use them for production of high-quality mozzarella cheese.
HUSBANDRY
The husbandry system of water buffalo depends on the purpose for which they are bred and maintained. Most of them are kept by people who work on small farms in family units. Their buffalo live in very close association with them, and are often their greatest capital asset. The women and girls in India generally look after the milking buffalo while the men and boys are concerned with the working animals. Throughout Asia, they are commonly tended by children who are often seen leading or riding their charges to wallowing places. Water buffalo are the ideal animals for work in the deep mud of paddy fields because of their large hooves and flexible foot joints. They are often referred to as "the living tractor of the East". It probably is possible to plough deeper with buffalo than with either oxen or horses. They are the most efficient and economical means of cultivation of small fields. In most rice-producing countries, they are used for threshing and for transporting the sheaves during the rice harvest. They provide power for oilseed mills, sugarcane presses, and devices for raising water. They are widely used as pack animals, and in India and Pakistan also for heavy haulage. In their invasions of Europe, the Turks used buffalo for hauling heavy battering rams. Their dung is used as a fertilizer, and as a fuel when dried.
Buffalo contribute 72 million tones of milk and three million tones of meat annually to world food, much of it in areas that are prone to nutritional imbalances. In India, river-type buffalo are kept mainly for milk production and for transport, whereas swamp-type buffalo are kept mainly for work and a small amount of milk.
DAIRY PRODUCTS
Water buffalo milk presents physicochemical features different from that of other ruminant species, such as a higher content of fatty acids and proteins. The physical and chemical parameters of swamp and river type water buffalo milk differ. Water buffalo milk contains higher levels of total solids, crude protein, fat, calcium, and phosphorus, and slightly higher content of lactose compared with those of cow milk. The high level of total solids makes water buffalo milk ideal for processing into value-added dairy products such as cheese. The conjugated linoleic acid (CLA) content in milk ranged from 4.4 mg/g fat in September to 7.6 mg/g fat in June. Seasons and genetics may play a role in variation of CLA level and changes in gross composition of the water buffalo milk.
Water buffalo milk is processed into a large variety of dairy products:
- Cream churns much faster at higher fat levels and gives higher overrun than cow cream.
- Butter from water buffalo cream displays more stability than that from cow cream.
- Ghee from water buffalo milk has a different texture with a bigger grain size than ghee from cow milk.
- Heat-concentrated milk products in the Indian subcontinent include paneer, khoa, rabri, kheer and basundi.
- Fermented milk products include dahi, yogurt, and chakka.
- Whey is used for making ricotta and mascarpone in Italy, and alkarish in Syria and Egypt.
- Soft cheeses made include mozzarella in Italy, karish, mish, and domiati in Egypt, madhfor in Iraq, alghab in Syria, kesong puti in the Philippines, and vladeasa in Romania.
- The semihard cheese beyaz peynir is made in Turkey.
- Hard cheeses include braila in Romania, rahss in Egypt, white brine in Bulgaria, and akkawi in Syria.
- Watered-down buffalo milk is used as a cheaper alternative to regular milk.
MEAT AND SKIN PRODUCTS
Water buffalo meat, sometimes called "carabeef", is often passed off as beef in certain regions, and is also a major source of export revenue for India. In many Asian regions, buffalo meat is less preferred due to its toughness; however, recipes have evolved (rendang, for example) where the slow cooking process and spices not only make the meat palatable, but also preserve it, an important factor in hot climates where refrigeration is not always available.Their hides provide tough and useful leather, often used for shoes.
BONE AND HORN PRODUCTS
The bones and horns are often made into jewellery, especially earrings. Horns are used for the embouchure of musical instruments, such as ney and kaval.
ENVIRONMENTAL EFFECTS
Wildlife conservation scientists have started to recommend and use introduced populations of feral domestic water buffalo in far-away lands to manage uncontrolled vegetation growth in and around natural wetlands. Introduced water buffalo at home in such environs provide cheap service by regularly grazing the uncontrolled vegetation and opening up clogged water bodies for waterfowl, wetland birds, and other wildlife. Grazing water buffalo are sometimes used in Great Britain for conservation grazing, such as in Chippenham Fen National Nature Reserve. The buffalo can better adapt to wet conditions and poor-quality vegetation than cattle.
Currently, research is being conducted at the Lyle Center for Regenerative Studies to determine the levels of nutrients removed and returned to wetlands when water buffalo are used for wetland vegetation management.
However, in uncontrolled circumstances, water buffalo can cause environmental damage, such as trampling vegetation, disturbing bird and reptile nesting sites, and spreading exotic weeds.
RESEARCH
The world's first cloned buffalo was developed by Indian scientists from National Dairy Research Institute, Karnal. The buffalo calf was named Samrupa. The calf did not survive more than a week, and died due to some genetic disorders. So, the scientists created another cloned buffalo a few months later, and named it Garima.
On 15 September 2007, the Philippines announced its development of Southeast Asia's first cloned buffalo. The Philippine Council for Agriculture, Forestry and Natural Resources Research and Development (PCARRD), under the Department of Science and Technology in Los Baños, Laguna, approved this project. The Department of Agriculture's Philippine Carabao Center (PCC) will implement cloning through somatic cell nuclear transfer as a tool for genetic improvement in water buffalo. "Super buffalo calves" will be produced. There will be no modification or alteration of the genetic materials, as in genetically modified organisms.
On 1 January 2008, the Philippine Carabao Center in Nueva Ecija, per Filipino scientists, initiated a study to breed a super water buffalo that could produce 4 to 18 litres of milk per day using gene-based technology. Also, the first in vitro river buffalo was born there in 2004 from an in vitro-produced, vitrified embryo, named "Glory" after President Gloria Macapagal-Arroyo. Joseph Estrada's most successful project as an opposition senator, the PCC was created through Republic Act 3707, the Carabao Act of 1992.
IN CULTURE
Some ethnic groups, such as Batak and Toraja in Indonesia and the Derung in China, use water buffalo or kerbau (called horbo in Batak or tedong in Toraja) as sacrificial animals at several festivals.
- Legend has it that the Chinese philosophical sage Laozi left China through the Han Gu Pass riding a water buffalo.
- According to Hindu lore, the god of death Yama, rides on a male water buffalo.
- The carabao subspecies is considered a national symbol in the Philippines.
- In Vietnam, water buffalo are often the most valuable possession of poor farmers: "Con trâu là đầu cơ nghiệp". They are treated as a member of the family: "Chồng cày, vợ cấy, con trâu đi bừa" ("The husband ploughs, the wife sows, water buffalo draws the rake") and are friends of the children. Children talk to their water buffalo, "Bao giờ cây lúa còn bông. Thì còn ngọn cỏ ngoài đồng trâu ăn." (Vietnamese children are responsible for grazing water buffalo. They feed them grass if they work laboriously for men.) In the old days, West Lake, Hà Nội, was named Kim Ngưu - Golden Water Buffalo.
- The Yoruban Orisha Oya (goddess of change) takes the form of a water buffalo.
FIGHTING FESTIVALS
- Pasungay Festival is held annually in the town of San Joaquin, Iloilo in the Philippines.
- Moh juj Water Buffalo fighting, is held every year in Bhogali Bihu in Assam. Ahotguri in Nagaon is famous for it.
- Do Son Water Buffalo Fighting Festival of Vietnam, held each year on the ninth day of the eighth month of the lunar calendar at Do Son Township, Haiphong City in Vietnam, is one of the most popular Vietnam festivals and events in Haiphong City. The preparations for this buffalo fighting festival begin from the two to three months earlier. The competing buffalo are selected and methodically trained months in advance. It is a traditional festival of Vietnam attached to a Water God worshipping ceremony and the Hien Sinh custom to show martial spirit of the local people of Do Son, Haiphong.
- "Hai Luu" Water Buffalo Fighting Festival of Vietnam, According to ancient records, the buffalo fighting in Hai Luu Commune has existed from the 2nd century B.C. General Lu Gia at that time, had the buffalo slaughtered to give a feast to the local people and the warriors, and organized buffalo fighting for amusement. Eventually, all the fighting buffalo will be slaughtered as tributes to the deities.
- "Ko Samui" Water Buffalo Fighting Festival of Thailand, is a very popular event held on special occasions such as New Year's Day in January, and Songkran in mid-April, this festival features head-wrestling bouts in which two male Asian water buffalo are pitted against one another. Unlike in Spanish Bullfighting, wherein bulls get killed while fighting sword-wielding men, Buffalo Fighting Festival held at Ko Samui, Thailand is fairly harmless contest. The fighting season varies according to ancient customs & ceremonies. The first Buffalo to turn and run away is considered the loser, the winning buffalo becomes worth several million baht. Ko Samui is an island in the Gulf of Thailand in the South China Sea, it is 700 km from Bangkok and is connected to it by regular flights.
- "Ma'Pasilaga Tedong" Water Buffalo Fighting Festival, in Tana Toraja Regency of Sulawesi Island, Indonesia, is a very popular event where the Rambu Solo' or a Burial Festival took place in Tana Toraja.
RACING FESTIVALS
Carabao Carroza Festival is being held annually every May in the town of Pavia, Iloilo, Philippines.
Kambala races of Karnataka, India, take place between December and March. The races are conducted by having the water buffalo (he buffalo) run in long parallel slushy ditches, where they are driven by men standing on wooden planks drawn by the buffalo. The objectives of the race are to finish first and to raise the water to the greatest height and also a rural sport. Kambala races are arranged with competition, as well as without competition and as a part of thanks giving (to god) in about 50 villages of coastal Karnataka.
In the Chonburi Province of Thailand, and in Pakistan, there are annual water buffalo races.
Chon Buri Water buffalo racing festival, Thailand In downtown Chonburi, 70 km south of Bangkok, at the annual water buffalo festival held in mid-October. About 300 buffalo race in groups of five or six, spurred on by bareback jockeys wielding wooden sticks, as hundreds of spectators cheer. The water buffalo has always played an important role in agriculture in Thailand. For farmers of Chon Buri Province, near Bangkok, it is an important annual festival, beginning in mid-October. It is also a celebration among rice farmers before the rice harvest. At dawn, farmers walk their buffalo through surrounding rice fields, splashing them with water to keep them cool before leading them to the race field. This amazing festival started over a hundred years ago when two men arguing about whose buffalo was the fastest ended up having a race between them. That’s how it became a tradition and gradually a social event for farmers who gathered from around the country in Chonburi to trade their goods. The festival also helps a great deal in preserving the number of buffalo, which have been dwindling at quite an alarming rate in other regions. Modern machinery is rapidly replacing buffalo in Thai agriculture. With most of the farm work mechanized, the buffalo-racing tradition has continued. Racing buffalo are now raised just to race; they do not work at all. The few farm buffalo which still do work are much bigger than the racers because of the strenuous work they perform. Farm buffalo are in the "Buffalo Beauty Pageant", a Miss Farmer beauty contest and a comic buffalo costume contest etc.. This festival perfectly exemplifies a favored Thai attitude to life — "sanuk," meaning fun.
Babulang Water buffalo racing festival, Sarawak, Malaysia, is the largest or grandest of the many rituals, ceremonies and festivals of the traditional Bisaya (Borneo) community of Limbang, Sarawak. Highlights are the Ratu Babulang competition and the Water buffalo races which can only be found in this town in Sarawak, Malaysia.
Vihear Suor village Water buffalo racing festival, in Cambodia, each year, people visit Buddhist temples across the country to honor their deceased loved ones during a 15-day period commonly known as the Festival of the Dead but in Vihear Suor village, about 35 km northeast of Cambodia, citizens each year wrap up the festival with a water buffalo race to entertain visitors and honour a pledge made hundreds of years ago. There was a time when many village cattle which provide rural Cambodians with muscle power to plough their fields and transport agricultural products died from an unknown disease. The villagers prayed to a spirit to help save their animals from the disease and promised to show their gratitude by holding a buffalo race each year on the last day of "P'chum Ben" festival as it is known in Cambodian. The race draws hundreds of spectators who come to see riders and their animals charge down the racing field, the racers bouncing up and down on the backs of their buffalo, whose horns were draped with colorful cloth.
Pothu puttu matsaram, Kerala, South India, is similar to Kambala races.
WIKIPEDIA
The water buffalo or domestic Asian water buffalo (Bubalus bubalis) is a large bovid originating in South Asia, Southeast Asia, and China. Today, it is also found in Europe, Australia, and some American countries. The wild water buffalo (Bubalus arnee) native to Southeast Asia is considered a different species, but most likely represents the ancestor of the domestic water buffalo.
Two extant types of water buffalo are recognized based on morphological and behavioural criteria – the river buffalo of South Asia and further west to the Balkans, Egypt, and Italy, and the swamp buffalo, found from Assam in the west through Southeast Asia to the Yangtze valley of China in the east. The origins of the domestic water buffalo types are debated, although results of a phylogenetic study indicate that the swamp type may have originated in China and was domesticated about 4,000 years ago, while the river type may have originated from India and was domesticated about 5,000 years ago. Water buffalo were traded from the Indus Valley Civilisation to Mesopotamia, in modern Iraq, 2500 BC by the Meluhhas. The seal of a scribe employed by an Akkadian king shows the sacrifice of water buffalo.
At least 130 million domestic water buffalo exist, and more human beings depend on them than on any other domestic animal. They are especially suitable for tilling rice fields, and their milk is richer in fat and protein than that of dairy cattle. The large feral population of northern Australia became established in the late 19th century, and smaller feral herds are in New Guinea, Tunisia, and northeastern Argentina. Feral herds are also present in New Britain, New Ireland, Irian Jaya, Papua New Guinea, Colombia, Guyana, Suriname, Brazil, and Uruguay.
CHARACTERISTICS
The skin of river buffalo is black, but some specimens may have dark, slate-coloured skin. Swamp buffalo have a grey skin at birth, but become slate blue later. Albinoids are present in some populations. River buffalo have comparatively longer faces, smaller girths, and bigger limbs than swamp buffalo. Their dorsal ridges extend further back and taper off more gradually. Their horns grow downward and backward, then curve upward in a spiral. Swamp buffalo are heavy-bodied and stockily built; the body is short and the belly large. The forehead is flat, the eyes prominent, the face short, and the muzzle wide. The neck is comparatively long, and the withers and croup are prominent. A dorsal ridge extends backward and ends abruptly just before the end of the chest. Their horns grow outward, and curve in a semicircle, but always remain more or less on the plane of the forehead. The tail is short, reaching only to the hocks. Height at withers is 129–133 cm for males, and 120–127 cm for females. They range in weight from 300–550 kg, but weights of over 1,000 kg have also been observed.
Tedong bonga is a black pied buffalo featuring a unique black and white colouration that is favoured by the Toraja of Sulawesi.
The swamp buffalo has 48 chromosomes; the river buffalo has 50 chromosomes. The two types do not readily interbreed, but fertile offspring can occur. Buffalo-cattle hybrids have not been observed to occur, and the embryos of such hybrids do not reach maturity in laboratory experiments.
The rumen of the water buffalo has important differences from that of other ruminants. It contains a larger population of bacteria, particularly the cellulolytic bacteria, lower protozoa, and higher fungi zoospores. In addition, higher rumen ammonia nitrogen (NH4-N) and higher pH have been found as compared to those in cattle
ECOLOGY AND BEHAVIOR
River buffalo prefer deep water. Swamp buffalo prefer to wallow in mudholes which they make with their horns. During wallowing, they acquire a thick coating of mud. Both are well adapted to a hot and humid climate with temperatures ranging from 0 °C in the winter to 30 °C and greater in the summer. Water availability is important in hot climates, since they need wallows, rivers, or splashing water to assist in thermoregulation. Some breeds are adapted to saline seaside shores and saline sandy terrain.
DIET
Water buffalo thrive on many aquatic plants and during floods, will graze submerged, raising their heads above the water and carrying quantities of edible plants. They eat reeds (quassab), a giant reed (birdi), a kind of bulrush (kaulan), water hyacinth, and marsh grasses. Some of these plants are of great value to local peoples. Others, such as water hyacinth, are a major problem in some tropical valleys, and water buffalo may help to keep waterways clear.
Green fodders are used widely for intensive milk production and for fattening. Many fodder crops are conserved as hay, chaffed, or pulped. Fodders include alfalfa, berseem and bancheri, the leaves, stems or trimmings of banana, cassava, fodder beet, halfa, ipil-ipil and kenaf, maize, oats, pandarus, peanut, sorghum, soybean, sugarcane, bagasse, and turnips. Citrus pulp and pineapple wastes have been fed safely to buffalo. In Egypt, whole sun-dried dates are fed to milk-buffalo up to 25% of the standard feed mixture.
REPRODUCTION
Swamp buffalo generally become reproductive at an older age than river breeds. Young males in Egypt, India, and Pakistan are first mated at about 3.0–3.5 years of age, but in Italy
they may be used as early as 2 years of age. Successful mating behaviour may continue until the animal is 12 years or even older. A good river male can impregnate 100 females in a year. A strong seasonal influence on mating occurs. Heat stress reduces libido
Although buffalo are polyoestrous, their reproductive efficiency shows wide variation throughout the year. Buffalo cows exhibit a distinct seasonal change in displaying oestrus, conception rate, and calving rate. The age at first oestrus of heifers varies between breeds from 13–33 months, but mating at the first oestrus is often infertile and usually deferred until they are 3 years old. Gestation lasts from 281–334 days, but most reports give a range between 300 and 320 days. Swamp buffalo carry their calves for one or two weeks longer than river buffalo. It is not rare to find buffalo that continue to work well at the age of 30, and instances of a working life of 40 years are recorded.
TAXONOMIC HISTORY
Carl Linnaeus first described the genus Bos and the water buffalo under the binomial Bubalis bubalus in 1758; the latter was known to occur in Asia and as a domestic form in Italy. Ellerman and Morrison-Scott treated the wild and domestic forms of the water buffalo as conspecifics whereas others treated them as different species. The nomenclatorial treatment of wild and domestic forms has been inconsistent and varies between authors and even within the works of single authors.
In March 2003, the International Commission on Zoological Nomenclature achieved consistency in the naming of wild and domestic water buffalo by ruling that the scientific name Bubalus arnee is valid for the wild form. B. bubalis continues to be valid for the domestic form and applies also to feral populations.
DOMESTICATION AND BREEDING
Water buffalo were domesticated in India about 5000 years ago, and in China about 4000 years ago. Two types are recognized, based on morphological and behavioural criteria – the river buffalo of the Indian subcontinent and further west to the Balkans and Italy, and the swamp buffalo, found from Assam in the west through Southeast Asia to the Yangtze valley of China in the east. The present-day river buffalo is the result of complex domestication processes involving more than one maternal lineage and a significant maternal gene flow from wild populations after the initial domestication events. Twenty-two breeds of the river type water buffalo are known, including Murrah, Nili-Ravi, Surti, Jafarabadi, Anatolian, Mediterranean, and Egyptian buffalo. China has a huge variety of buffalo genetic resources, comprising 16 local swamp buffalo breeds in various regions.
Results of mitochondrial DNA analyses indicate that the two types were domesticated independently. Sequencing of cytochrome b genes of Bubalus species implies that the domestic buffalo originated from at least two populations, and that the river and the swamp types have differentiated at the full species level. The genetic distance between the two types is so large that a divergence time of about 1.7 million years has been suggested. The swamp type was noticed to have the closest relationship with the tamaraw.
DISTRIBUTION OF POPULATIONS
The water buffalo population in the world is about 172 million.
IN ASIA
More than 95.8% of the world population of water buffalo are found in Asia including both river and swamp types. The water buffalo population in India numbered over 97.9 million head in 2003, representing 56.5% of the world population. They are primarily of the river type, with 10 well-defined breeds comprising Badhawari, Murrah, Nili-Ravi, Jafarabadi, Marathwada, Mehsana, Nagpuri, Pandharpuri, Toda, and Surti. Swamp buffalo occur only in small areas in the north-eastern part of the country and are not distinguished into breeds.
In 2003, the second-largest population lived in China, with 22.759 million head, all of the swamp type with breeds kept only in the lowlands, and other breeds kept only in the mountains; as of 2003, 3.2 million swamp-type carabao buffalo were in the Philippines, nearly three million swamp buffalo were in Vietnam, and 772,764 buffalo were in Bangladesh. About 750,000 head were estimated in Sri Lanka in 1997.
The water buffalo is the main dairy animal in Pakistan, with 23.47 million head in 2010. Of these, 76% are kept in the Punjab. The rest of them are mostly in the province of Sindh. Breeds used are Nili-Ravi, Kundi, and Azi Kheli. Karachi has the largest population of water buffalos for an area where fodder is not grown, consisting of 350,000 head kept mainly for milking.
In Thailand, the number of water buffalo dropped from more than 3 million head in 1996 to less than 1.24 million head in 2011. Slightly over 75% of them are kept in the country's northeastern region. The statistics also indicate that by the beginning of 2012, less than one million were in the country, partly as a result of illegal shipments to neighboring countries where sales prices are higher than in Thailand.
Water buffalo are also present in the southern region of Iraq, in the marshes. These marshes were drained by Saddam Hussein in 1991 in an attempt to punish the south for the uprisings of 1991. Following 2003, and the fall of the Saddam regime, these lands were reflooded and a 2007 report in the provinces of Maysan and Thi Qar shows a steady increase in the number of water buffalo. The report puts the number at 40,008 head in those two provinces.
IN EUROPE AND THE MEDITERRANEAN
Water buffalo likely were introduced to Europe from India or other Oriental countries. To Italy they were introduced about the year 600 in the reign of the Longobard King Agilulf. As they appear in the company of wild horses, they probably were a present from the Khan of the Avars, a Turkic nomadic tribe that dwelt near the Danube River at the time. Sir H. Johnston knew of a herd of water buffalo presented by a King of Naples to the Bey of Tunis in the mid-19th century that had resumed the feral state in northern Tunis.
European buffalo are all of the river type and considered to be of the same breed named Mediterranean buffalo. In Italy, the Mediterranean type was particularly selected and is called Mediterranean Italian breed to distinguish it from other European breeds, which differ genetically. Mediterranean buffalo are also found in Romania, Bulgaria, Greece, Albania, Kosovo, and the Republic of Macedonia, with a few hundred in the United Kingdom, Germany, the Netherlands, Switzerland, and Hungary. Little exchange of breeding buffalo has occurred among countries, so each population has its own phenotypic features and performances. In Bulgaria, they were crossbred with the Indian Murrah breed, and in Romania, some were crossbred with Bulgarian Murrah. Populations in Turkey are of the Anatolian buffalo breed.
IN AUSTRALIA
Between 1824 and 1849, water buffalo were introduced into the Northern Territory from Timor, Kisar, and probably other islands in the Indonesian archipelago. In 1886, a few milking types were brought from India to Darwin. They have been the main grazing animals on the subcoastal plains and river basins between Darwin and Arnhem Land since the 1880s. In the early 1960s, an estimated population of 150,000 to 200,000 buffalo were living in the plains and nearby areas.
They became feral and are causing significant environmental damage. Buffalo are also found in the Top End. As a result, they were hunted in the Top End from 1885 until 1980. The commencement of the brucellosis and tuberculosis campaign (BTEC) resulted in a huge culling program to reduce buffalo herds to a fraction of the numbers that were reached in the 1980s. The BTEC was finished when the Northern Territory was declared free of the disease in 1997. Numbers dropped dramatically as a result of the campaign, but have since recovered to an estimated 150,000 animals across northern Australia in 2008.
During the 1950s, buffalo were hunted for their skins and meat, which was exported and used in the local trade. In the late 1970s, live exports were made to Cuba and continued later into other countries. Buffalo are now crossed with riverine buffalo in artificial insemination programs, and may be found in many areas of Australia. Some of these crossbreds are used for milk production. Melville Island is a popular hunting location, where a steady population up to 4,000 individuals exists. Safari outfits are run from Darwin to Melville Island and other locations in the Top End, often with the use of bush pilots. The horns, which can measure up to a record of 3.1 m tip-to-tip, are prized hunting trophies.
The buffalo have developed a different appearance from the Indonesian buffalo from which they descend. They live mainly in freshwater marshes and billabongs, and their territory range can be quite expansive during the wet season. Their only natural predators in Australia are adult saltwater crocodiles, with whom they share the billabongs, and dingoes, which have been known to prey on buffalo calves and occasionally adult buffalo when the dingoes are in large packs.
Buffalo were exported live to Indonesia until 2011, at a rate of about 3000 per year. After the live export ban that year, the exports dropped to zero, and had not resumed as of June 2013.
IN SOUTH AMERICA
Water buffalo were introduced into the Amazon River basin in 1895. They are now extensively used there for meat and dairy production. In 2005, the buffalo herd in the Brazilian Amazon stood at roughly 1.6 million head, of which 460,000 were located in the lower Amazon floodplain. Breeds used include Mediterranean from Italy, Murrah and Jafarabadi from India, and Carabao from the Philippines.
During the 1970s, small herds were imported to Costa Rica, Ecuador, Cayenne, Panama, Surinam, Guyana, and Venezuela.
In Argentina, many game ranches raise water buffalo for commercial hunting
IN NORTH AMERICA
In 1974, four water buffalo were imported to the United States from Guam to be studied at the University of Florida. In February 1978, the first herd arrived for commercial farming. Until 2002, only one commercial breeder was in the United States. Water buffalo meat is imported from Australia. Until 2011, water buffalo were raised in Gainesville, Florida, from young obtained from zoo overflow. They were used primarily for meat production, frequently sold as hamburger.[38] Other US ranchers use them for production of high-quality mozzarella cheese.
HUSBANDRY
The husbandry system of water buffalo depends on the purpose for which they are bred and maintained. Most of them are kept by people who work on small farms in family units. Their buffalo live in very close association with them, and are often their greatest capital asset. The women and girls in India generally look after the milking buffalo while the men and boys are concerned with the working animals. Throughout Asia, they are commonly tended by children who are often seen leading or riding their charges to wallowing places. Water buffalo are the ideal animals for work in the deep mud of paddy fields because of their large hooves and flexible foot joints. They are often referred to as "the living tractor of the East". It probably is possible to plough deeper with buffalo than with either oxen or horses. They are the most efficient and economical means of cultivation of small fields. In most rice-producing countries, they are used for threshing and for transporting the sheaves during the rice harvest. They provide power for oilseed mills, sugarcane presses, and devices for raising water. They are widely used as pack animals, and in India and Pakistan also for heavy haulage. In their invasions of Europe, the Turks used buffalo for hauling heavy battering rams. Their dung is used as a fertilizer, and as a fuel when dried.
Buffalo contribute 72 million tones of milk and three million tones of meat annually to world food, much of it in areas that are prone to nutritional imbalances. In India, river-type buffalo are kept mainly for milk production and for transport, whereas swamp-type buffalo are kept mainly for work and a small amount of milk.
DAIRY PRODUCTS
Water buffalo milk presents physicochemical features different from that of other ruminant species, such as a higher content of fatty acids and proteins. The physical and chemical parameters of swamp and river type water buffalo milk differ. Water buffalo milk contains higher levels of total solids, crude protein, fat, calcium, and phosphorus, and slightly higher content of lactose compared with those of cow milk. The high level of total solids makes water buffalo milk ideal for processing into value-added dairy products such as cheese. The conjugated linoleic acid (CLA) content in milk ranged from 4.4 mg/g fat in September to 7.6 mg/g fat in June. Seasons and genetics may play a role in variation of CLA level and changes in gross composition of the water buffalo milk.
Water buffalo milk is processed into a large variety of dairy products:
- Cream churns much faster at higher fat levels and gives higher overrun than cow cream.
- Butter from water buffalo cream displays more stability than that from cow cream.
- Ghee from water buffalo milk has a different texture with a bigger grain size than ghee from cow milk.
- Heat-concentrated milk products in the Indian subcontinent include paneer, khoa, rabri, kheer and basundi.
- Fermented milk products include dahi, yogurt, and chakka.
- Whey is used for making ricotta and mascarpone in Italy, and alkarish in Syria and Egypt.
- Soft cheeses made include mozzarella in Italy, karish, mish, and domiati in Egypt, madhfor in Iraq, alghab in Syria, kesong puti in the Philippines, and vladeasa in Romania.
- The semihard cheese beyaz peynir is made in Turkey.
- Hard cheeses include braila in Romania, rahss in Egypt, white brine in Bulgaria, and akkawi in Syria.
- Watered-down buffalo milk is used as a cheaper alternative to regular milk.
MEAT AND SKIN PRODUCTS
Water buffalo meat, sometimes called "carabeef", is often passed off as beef in certain regions, and is also a major source of export revenue for India. In many Asian regions, buffalo meat is less preferred due to its toughness; however, recipes have evolved (rendang, for example) where the slow cooking process and spices not only make the meat palatable, but also preserve it, an important factor in hot climates where refrigeration is not always available.Their hides provide tough and useful leather, often used for shoes.
BONE AND HORN PRODUCTS
The bones and horns are often made into jewellery, especially earrings. Horns are used for the embouchure of musical instruments, such as ney and kaval.
ENVIRONMENTAL EFFECTS
Wildlife conservation scientists have started to recommend and use introduced populations of feral domestic water buffalo in far-away lands to manage uncontrolled vegetation growth in and around natural wetlands. Introduced water buffalo at home in such environs provide cheap service by regularly grazing the uncontrolled vegetation and opening up clogged water bodies for waterfowl, wetland birds, and other wildlife. Grazing water buffalo are sometimes used in Great Britain for conservation grazing, such as in Chippenham Fen National Nature Reserve. The buffalo can better adapt to wet conditions and poor-quality vegetation than cattle.
Currently, research is being conducted at the Lyle Center for Regenerative Studies to determine the levels of nutrients removed and returned to wetlands when water buffalo are used for wetland vegetation management.
However, in uncontrolled circumstances, water buffalo can cause environmental damage, such as trampling vegetation, disturbing bird and reptile nesting sites, and spreading exotic weeds.
RESEARCH
The world's first cloned buffalo was developed by Indian scientists from National Dairy Research Institute, Karnal. The buffalo calf was named Samrupa. The calf did not survive more than a week, and died due to some genetic disorders. So, the scientists created another cloned buffalo a few months later, and named it Garima.
On 15 September 2007, the Philippines announced its development of Southeast Asia's first cloned buffalo. The Philippine Council for Agriculture, Forestry and Natural Resources Research and Development (PCARRD), under the Department of Science and Technology in Los Baños, Laguna, approved this project. The Department of Agriculture's Philippine Carabao Center (PCC) will implement cloning through somatic cell nuclear transfer as a tool for genetic improvement in water buffalo. "Super buffalo calves" will be produced. There will be no modification or alteration of the genetic materials, as in genetically modified organisms.
On 1 January 2008, the Philippine Carabao Center in Nueva Ecija, per Filipino scientists, initiated a study to breed a super water buffalo that could produce 4 to 18 litres of milk per day using gene-based technology. Also, the first in vitro river buffalo was born there in 2004 from an in vitro-produced, vitrified embryo, named "Glory" after President Gloria Macapagal-Arroyo. Joseph Estrada's most successful project as an opposition senator, the PCC was created through Republic Act 3707, the Carabao Act of 1992.
IN CULTURE
Some ethnic groups, such as Batak and Toraja in Indonesia and the Derung in China, use water buffalo or kerbau (called horbo in Batak or tedong in Toraja) as sacrificial animals at several festivals.
- Legend has it that the Chinese philosophical sage Laozi left China through the Han Gu Pass riding a water buffalo.
- According to Hindu lore, the god of death Yama, rides on a male water buffalo.
- The carabao subspecies is considered a national symbol in the Philippines.
- In Vietnam, water buffalo are often the most valuable possession of poor farmers: "Con trâu là đầu cơ nghiệp". They are treated as a member of the family: "Chồng cày, vợ cấy, con trâu đi bừa" ("The husband ploughs, the wife sows, water buffalo draws the rake") and are friends of the children. Children talk to their water buffalo, "Bao giờ cây lúa còn bông. Thì còn ngọn cỏ ngoài đồng trâu ăn." (Vietnamese children are responsible for grazing water buffalo. They feed them grass if they work laboriously for men.) In the old days, West Lake, Hà Nội, was named Kim Ngưu - Golden Water Buffalo.
- The Yoruban Orisha Oya (goddess of change) takes the form of a water buffalo.
FIGHTING FESTIVALS
- Pasungay Festival is held annually in the town of San Joaquin, Iloilo in the Philippines.
- Moh juj Water Buffalo fighting, is held every year in Bhogali Bihu in Assam. Ahotguri in Nagaon is famous for it.
- Do Son Water Buffalo Fighting Festival of Vietnam, held each year on the ninth day of the eighth month of the lunar calendar at Do Son Township, Haiphong City in Vietnam, is one of the most popular Vietnam festivals and events in Haiphong City. The preparations for this buffalo fighting festival begin from the two to three months earlier. The competing buffalo are selected and methodically trained months in advance. It is a traditional festival of Vietnam attached to a Water God worshipping ceremony and the Hien Sinh custom to show martial spirit of the local people of Do Son, Haiphong.
- "Hai Luu" Water Buffalo Fighting Festival of Vietnam, According to ancient records, the buffalo fighting in Hai Luu Commune has existed from the 2nd century B.C. General Lu Gia at that time, had the buffalo slaughtered to give a feast to the local people and the warriors, and organized buffalo fighting for amusement. Eventually, all the fighting buffalo will be slaughtered as tributes to the deities.
- "Ko Samui" Water Buffalo Fighting Festival of Thailand, is a very popular event held on special occasions such as New Year's Day in January, and Songkran in mid-April, this festival features head-wrestling bouts in which two male Asian water buffalo are pitted against one another. Unlike in Spanish Bullfighting, wherein bulls get killed while fighting sword-wielding men, Buffalo Fighting Festival held at Ko Samui, Thailand is fairly harmless contest. The fighting season varies according to ancient customs & ceremonies. The first Buffalo to turn and run away is considered the loser, the winning buffalo becomes worth several million baht. Ko Samui is an island in the Gulf of Thailand in the South China Sea, it is 700 km from Bangkok and is connected to it by regular flights.
- "Ma'Pasilaga Tedong" Water Buffalo Fighting Festival, in Tana Toraja Regency of Sulawesi Island, Indonesia, is a very popular event where the Rambu Solo' or a Burial Festival took place in Tana Toraja.
RACING FESTIVALS
Carabao Carroza Festival is being held annually every May in the town of Pavia, Iloilo, Philippines.
Kambala races of Karnataka, India, take place between December and March. The races are conducted by having the water buffalo (he buffalo) run in long parallel slushy ditches, where they are driven by men standing on wooden planks drawn by the buffalo. The objectives of the race are to finish first and to raise the water to the greatest height and also a rural sport. Kambala races are arranged with competition, as well as without competition and as a part of thanks giving (to god) in about 50 villages of coastal Karnataka.
In the Chonburi Province of Thailand, and in Pakistan, there are annual water buffalo races.
Chon Buri Water buffalo racing festival, Thailand In downtown Chonburi, 70 km south of Bangkok, at the annual water buffalo festival held in mid-October. About 300 buffalo race in groups of five or six, spurred on by bareback jockeys wielding wooden sticks, as hundreds of spectators cheer. The water buffalo has always played an important role in agriculture in Thailand. For farmers of Chon Buri Province, near Bangkok, it is an important annual festival, beginning in mid-October. It is also a celebration among rice farmers before the rice harvest. At dawn, farmers walk their buffalo through surrounding rice fields, splashing them with water to keep them cool before leading them to the race field. This amazing festival started over a hundred years ago when two men arguing about whose buffalo was the fastest ended up having a race between them. That’s how it became a tradition and gradually a social event for farmers who gathered from around the country in Chonburi to trade their goods. The festival also helps a great deal in preserving the number of buffalo, which have been dwindling at quite an alarming rate in other regions. Modern machinery is rapidly replacing buffalo in Thai agriculture. With most of the farm work mechanized, the buffalo-racing tradition has continued. Racing buffalo are now raised just to race; they do not work at all. The few farm buffalo which still do work are much bigger than the racers because of the strenuous work they perform. Farm buffalo are in the "Buffalo Beauty Pageant", a Miss Farmer beauty contest and a comic buffalo costume contest etc.. This festival perfectly exemplifies a favored Thai attitude to life — "sanuk," meaning fun.
Babulang Water buffalo racing festival, Sarawak, Malaysia, is the largest or grandest of the many rituals, ceremonies and festivals of the traditional Bisaya (Borneo) community of Limbang, Sarawak. Highlights are the Ratu Babulang competition and the Water buffalo races which can only be found in this town in Sarawak, Malaysia.
Vihear Suor village Water buffalo racing festival, in Cambodia, each year, people visit Buddhist temples across the country to honor their deceased loved ones during a 15-day period commonly known as the Festival of the Dead but in Vihear Suor village, about 35 km northeast of Cambodia, citizens each year wrap up the festival with a water buffalo race to entertain visitors and honour a pledge made hundreds of years ago. There was a time when many village cattle which provide rural Cambodians with muscle power to plough their fields and transport agricultural products died from an unknown disease. The villagers prayed to a spirit to help save their animals from the disease and promised to show their gratitude by holding a buffalo race each year on the last day of "P'chum Ben" festival as it is known in Cambodian. The race draws hundreds of spectators who come to see riders and their animals charge down the racing field, the racers bouncing up and down on the backs of their buffalo, whose horns were draped with colorful cloth.
Pothu puttu matsaram, Kerala, South India, is similar to Kambala races.
WIKIPEDIA
The water buffalo or domestic Asian water buffalo (Bubalus bubalis) is a large bovid originating in South Asia, Southeast Asia, and China. Today, it is also found in Europe, Australia, and some American countries. The wild water buffalo (Bubalus arnee) native to Southeast Asia is considered a different species, but most likely represents the ancestor of the domestic water buffalo.
Two extant types of water buffalo are recognized based on morphological and behavioural criteria – the river buffalo of South Asia and further west to the Balkans, Egypt, and Italy, and the swamp buffalo, found from Assam in the west through Southeast Asia to the Yangtze valley of China in the east. The origins of the domestic water buffalo types are debated, although results of a phylogenetic study indicate that the swamp type may have originated in China and was domesticated about 4,000 years ago, while the river type may have originated from India and was domesticated about 5,000 years ago. Water buffalo were traded from the Indus Valley Civilisation to Mesopotamia, in modern Iraq, 2500 BC by the Meluhhas. The seal of a scribe employed by an Akkadian king shows the sacrifice of water buffalo.
At least 130 million domestic water buffalo exist, and more human beings depend on them than on any other domestic animal. They are especially suitable for tilling rice fields, and their milk is richer in fat and protein than that of dairy cattle. The large feral population of northern Australia became established in the late 19th century, and smaller feral herds are in New Guinea, Tunisia, and northeastern Argentina. Feral herds are also present in New Britain, New Ireland, Irian Jaya, Papua New Guinea, Colombia, Guyana, Suriname, Brazil, and Uruguay.
CHARACTERISTICS
The skin of river buffalo is black, but some specimens may have dark, slate-coloured skin. Swamp buffalo have a grey skin at birth, but become slate blue later. Albinoids are present in some populations. River buffalo have comparatively longer faces, smaller girths, and bigger limbs than swamp buffalo. Their dorsal ridges extend further back and taper off more gradually. Their horns grow downward and backward, then curve upward in a spiral. Swamp buffalo are heavy-bodied and stockily built; the body is short and the belly large. The forehead is flat, the eyes prominent, the face short, and the muzzle wide. The neck is comparatively long, and the withers and croup are prominent. A dorsal ridge extends backward and ends abruptly just before the end of the chest. Their horns grow outward, and curve in a semicircle, but always remain more or less on the plane of the forehead. The tail is short, reaching only to the hocks. Height at withers is 129–133 cm for males, and 120–127 cm for females. They range in weight from 300–550 kg, but weights of over 1,000 kg have also been observed.
Tedong bonga is a black pied buffalo featuring a unique black and white colouration that is favoured by the Toraja of Sulawesi.
The swamp buffalo has 48 chromosomes; the river buffalo has 50 chromosomes. The two types do not readily interbreed, but fertile offspring can occur. Buffalo-cattle hybrids have not been observed to occur, and the embryos of such hybrids do not reach maturity in laboratory experiments.
The rumen of the water buffalo has important differences from that of other ruminants. It contains a larger population of bacteria, particularly the cellulolytic bacteria, lower protozoa, and higher fungi zoospores. In addition, higher rumen ammonia nitrogen (NH4-N) and higher pH have been found as compared to those in cattle
ECOLOGY AND BEHAVIOR
River buffalo prefer deep water. Swamp buffalo prefer to wallow in mudholes which they make with their horns. During wallowing, they acquire a thick coating of mud. Both are well adapted to a hot and humid climate with temperatures ranging from 0 °C in the winter to 30 °C and greater in the summer. Water availability is important in hot climates, since they need wallows, rivers, or splashing water to assist in thermoregulation. Some breeds are adapted to saline seaside shores and saline sandy terrain.
DIET
Water buffalo thrive on many aquatic plants and during floods, will graze submerged, raising their heads above the water and carrying quantities of edible plants. They eat reeds (quassab), a giant reed (birdi), a kind of bulrush (kaulan), water hyacinth, and marsh grasses. Some of these plants are of great value to local peoples. Others, such as water hyacinth, are a major problem in some tropical valleys, and water buffalo may help to keep waterways clear.
Green fodders are used widely for intensive milk production and for fattening. Many fodder crops are conserved as hay, chaffed, or pulped. Fodders include alfalfa, berseem and bancheri, the leaves, stems or trimmings of banana, cassava, fodder beet, halfa, ipil-ipil and kenaf, maize, oats, pandarus, peanut, sorghum, soybean, sugarcane, bagasse, and turnips. Citrus pulp and pineapple wastes have been fed safely to buffalo. In Egypt, whole sun-dried dates are fed to milk-buffalo up to 25% of the standard feed mixture.
REPRODUCTION
Swamp buffalo generally become reproductive at an older age than river breeds. Young males in Egypt, India, and Pakistan are first mated at about 3.0–3.5 years of age, but in Italy
they may be used as early as 2 years of age. Successful mating behaviour may continue until the animal is 12 years or even older. A good river male can impregnate 100 females in a year. A strong seasonal influence on mating occurs. Heat stress reduces libido
Although buffalo are polyoestrous, their reproductive efficiency shows wide variation throughout the year. Buffalo cows exhibit a distinct seasonal change in displaying oestrus, conception rate, and calving rate. The age at first oestrus of heifers varies between breeds from 13–33 months, but mating at the first oestrus is often infertile and usually deferred until they are 3 years old. Gestation lasts from 281–334 days, but most reports give a range between 300 and 320 days. Swamp buffalo carry their calves for one or two weeks longer than river buffalo. It is not rare to find buffalo that continue to work well at the age of 30, and instances of a working life of 40 years are recorded.
TAXONOMIC HISTORY
Carl Linnaeus first described the genus Bos and the water buffalo under the binomial Bubalis bubalus in 1758; the latter was known to occur in Asia and as a domestic form in Italy. Ellerman and Morrison-Scott treated the wild and domestic forms of the water buffalo as conspecifics whereas others treated them as different species. The nomenclatorial treatment of wild and domestic forms has been inconsistent and varies between authors and even within the works of single authors.
In March 2003, the International Commission on Zoological Nomenclature achieved consistency in the naming of wild and domestic water buffalo by ruling that the scientific name Bubalus arnee is valid for the wild form. B. bubalis continues to be valid for the domestic form and applies also to feral populations.
DOMESTICATION AND BREEDING
Water buffalo were domesticated in India about 5000 years ago, and in China about 4000 years ago. Two types are recognized, based on morphological and behavioural criteria – the river buffalo of the Indian subcontinent and further west to the Balkans and Italy, and the swamp buffalo, found from Assam in the west through Southeast Asia to the Yangtze valley of China in the east. The present-day river buffalo is the result of complex domestication processes involving more than one maternal lineage and a significant maternal gene flow from wild populations after the initial domestication events. Twenty-two breeds of the river type water buffalo are known, including Murrah, Nili-Ravi, Surti, Jafarabadi, Anatolian, Mediterranean, and Egyptian buffalo. China has a huge variety of buffalo genetic resources, comprising 16 local swamp buffalo breeds in various regions.
Results of mitochondrial DNA analyses indicate that the two types were domesticated independently. Sequencing of cytochrome b genes of Bubalus species implies that the domestic buffalo originated from at least two populations, and that the river and the swamp types have differentiated at the full species level. The genetic distance between the two types is so large that a divergence time of about 1.7 million years has been suggested. The swamp type was noticed to have the closest relationship with the tamaraw.
DISTRIBUTION OF POPULATIONS
The water buffalo population in the world is about 172 million.
IN ASIA
More than 95.8% of the world population of water buffalo are found in Asia including both river and swamp types. The water buffalo population in India numbered over 97.9 million head in 2003, representing 56.5% of the world population. They are primarily of the river type, with 10 well-defined breeds comprising Badhawari, Murrah, Nili-Ravi, Jafarabadi, Marathwada, Mehsana, Nagpuri, Pandharpuri, Toda, and Surti. Swamp buffalo occur only in small areas in the north-eastern part of the country and are not distinguished into breeds.
In 2003, the second-largest population lived in China, with 22.759 million head, all of the swamp type with breeds kept only in the lowlands, and other breeds kept only in the mountains; as of 2003, 3.2 million swamp-type carabao buffalo were in the Philippines, nearly three million swamp buffalo were in Vietnam, and 772,764 buffalo were in Bangladesh. About 750,000 head were estimated in Sri Lanka in 1997.
The water buffalo is the main dairy animal in Pakistan, with 23.47 million head in 2010. Of these, 76% are kept in the Punjab. The rest of them are mostly in the province of Sindh. Breeds used are Nili-Ravi, Kundi, and Azi Kheli. Karachi has the largest population of water buffalos for an area where fodder is not grown, consisting of 350,000 head kept mainly for milking.
In Thailand, the number of water buffalo dropped from more than 3 million head in 1996 to less than 1.24 million head in 2011. Slightly over 75% of them are kept in the country's northeastern region. The statistics also indicate that by the beginning of 2012, less than one million were in the country, partly as a result of illegal shipments to neighboring countries where sales prices are higher than in Thailand.
Water buffalo are also present in the southern region of Iraq, in the marshes. These marshes were drained by Saddam Hussein in 1991 in an attempt to punish the south for the uprisings of 1991. Following 2003, and the fall of the Saddam regime, these lands were reflooded and a 2007 report in the provinces of Maysan and Thi Qar shows a steady increase in the number of water buffalo. The report puts the number at 40,008 head in those two provinces.
IN EUROPE AND THE MEDITERRANEAN
Water buffalo likely were introduced to Europe from India or other Oriental countries. To Italy they were introduced about the year 600 in the reign of the Longobard King Agilulf. As they appear in the company of wild horses, they probably were a present from the Khan of the Avars, a Turkic nomadic tribe that dwelt near the Danube River at the time. Sir H. Johnston knew of a herd of water buffalo presented by a King of Naples to the Bey of Tunis in the mid-19th century that had resumed the feral state in northern Tunis.
European buffalo are all of the river type and considered to be of the same breed named Mediterranean buffalo. In Italy, the Mediterranean type was particularly selected and is called Mediterranean Italian breed to distinguish it from other European breeds, which differ genetically. Mediterranean buffalo are also found in Romania, Bulgaria, Greece, Albania, Kosovo, and the Republic of Macedonia, with a few hundred in the United Kingdom, Germany, the Netherlands, Switzerland, and Hungary. Little exchange of breeding buffalo has occurred among countries, so each population has its own phenotypic features and performances. In Bulgaria, they were crossbred with the Indian Murrah breed, and in Romania, some were crossbred with Bulgarian Murrah. Populations in Turkey are of the Anatolian buffalo breed.
IN AUSTRALIA
Between 1824 and 1849, water buffalo were introduced into the Northern Territory from Timor, Kisar, and probably other islands in the Indonesian archipelago. In 1886, a few milking types were brought from India to Darwin. They have been the main grazing animals on the subcoastal plains and river basins between Darwin and Arnhem Land since the 1880s. In the early 1960s, an estimated population of 150,000 to 200,000 buffalo were living in the plains and nearby areas.
They became feral and are causing significant environmental damage. Buffalo are also found in the Top End. As a result, they were hunted in the Top End from 1885 until 1980. The commencement of the brucellosis and tuberculosis campaign (BTEC) resulted in a huge culling program to reduce buffalo herds to a fraction of the numbers that were reached in the 1980s. The BTEC was finished when the Northern Territory was declared free of the disease in 1997. Numbers dropped dramatically as a result of the campaign, but have since recovered to an estimated 150,000 animals across northern Australia in 2008.
During the 1950s, buffalo were hunted for their skins and meat, which was exported and used in the local trade. In the late 1970s, live exports were made to Cuba and continued later into other countries. Buffalo are now crossed with riverine buffalo in artificial insemination programs, and may be found in many areas of Australia. Some of these crossbreds are used for milk production. Melville Island is a popular hunting location, where a steady population up to 4,000 individuals exists. Safari outfits are run from Darwin to Melville Island and other locations in the Top End, often with the use of bush pilots. The horns, which can measure up to a record of 3.1 m tip-to-tip, are prized hunting trophies.
The buffalo have developed a different appearance from the Indonesian buffalo from which they descend. They live mainly in freshwater marshes and billabongs, and their territory range can be quite expansive during the wet season. Their only natural predators in Australia are adult saltwater crocodiles, with whom they share the billabongs, and dingoes, which have been known to prey on buffalo calves and occasionally adult buffalo when the dingoes are in large packs.
Buffalo were exported live to Indonesia until 2011, at a rate of about 3000 per year. After the live export ban that year, the exports dropped to zero, and had not resumed as of June 2013.
IN SOUTH AMERICA
Water buffalo were introduced into the Amazon River basin in 1895. They are now extensively used there for meat and dairy production. In 2005, the buffalo herd in the Brazilian Amazon stood at roughly 1.6 million head, of which 460,000 were located in the lower Amazon floodplain. Breeds used include Mediterranean from Italy, Murrah and Jafarabadi from India, and Carabao from the Philippines.
During the 1970s, small herds were imported to Costa Rica, Ecuador, Cayenne, Panama, Surinam, Guyana, and Venezuela.
In Argentina, many game ranches raise water buffalo for commercial hunting
IN NORTH AMERICA
In 1974, four water buffalo were imported to the United States from Guam to be studied at the University of Florida. In February 1978, the first herd arrived for commercial farming. Until 2002, only one commercial breeder was in the United States. Water buffalo meat is imported from Australia. Until 2011, water buffalo were raised in Gainesville, Florida, from young obtained from zoo overflow. They were used primarily for meat production, frequently sold as hamburger.[38] Other US ranchers use them for production of high-quality mozzarella cheese.
HUSBANDRY
The husbandry system of water buffalo depends on the purpose for which they are bred and maintained. Most of them are kept by people who work on small farms in family units. Their buffalo live in very close association with them, and are often their greatest capital asset. The women and girls in India generally look after the milking buffalo while the men and boys are concerned with the working animals. Throughout Asia, they are commonly tended by children who are often seen leading or riding their charges to wallowing places. Water buffalo are the ideal animals for work in the deep mud of paddy fields because of their large hooves and flexible foot joints. They are often referred to as "the living tractor of the East". It probably is possible to plough deeper with buffalo than with either oxen or horses. They are the most efficient and economical means of cultivation of small fields. In most rice-producing countries, they are used for threshing and for transporting the sheaves during the rice harvest. They provide power for oilseed mills, sugarcane presses, and devices for raising water. They are widely used as pack animals, and in India and Pakistan also for heavy haulage. In their invasions of Europe, the Turks used buffalo for hauling heavy battering rams. Their dung is used as a fertilizer, and as a fuel when dried.
Buffalo contribute 72 million tones of milk and three million tones of meat annually to world food, much of it in areas that are prone to nutritional imbalances. In India, river-type buffalo are kept mainly for milk production and for transport, whereas swamp-type buffalo are kept mainly for work and a small amount of milk.
DAIRY PRODUCTS
Water buffalo milk presents physicochemical features different from that of other ruminant species, such as a higher content of fatty acids and proteins. The physical and chemical parameters of swamp and river type water buffalo milk differ. Water buffalo milk contains higher levels of total solids, crude protein, fat, calcium, and phosphorus, and slightly higher content of lactose compared with those of cow milk. The high level of total solids makes water buffalo milk ideal for processing into value-added dairy products such as cheese. The conjugated linoleic acid (CLA) content in milk ranged from 4.4 mg/g fat in September to 7.6 mg/g fat in June. Seasons and genetics may play a role in variation of CLA level and changes in gross composition of the water buffalo milk.
Water buffalo milk is processed into a large variety of dairy products:
- Cream churns much faster at higher fat levels and gives higher overrun than cow cream.
- Butter from water buffalo cream displays more stability than that from cow cream.
- Ghee from water buffalo milk has a different texture with a bigger grain size than ghee from cow milk.
- Heat-concentrated milk products in the Indian subcontinent include paneer, khoa, rabri, kheer and basundi.
- Fermented milk products include dahi, yogurt, and chakka.
- Whey is used for making ricotta and mascarpone in Italy, and alkarish in Syria and Egypt.
- Soft cheeses made include mozzarella in Italy, karish, mish, and domiati in Egypt, madhfor in Iraq, alghab in Syria, kesong puti in the Philippines, and vladeasa in Romania.
- The semihard cheese beyaz peynir is made in Turkey.
- Hard cheeses include braila in Romania, rahss in Egypt, white brine in Bulgaria, and akkawi in Syria.
- Watered-down buffalo milk is used as a cheaper alternative to regular milk.
MEAT AND SKIN PRODUCTS
Water buffalo meat, sometimes called "carabeef", is often passed off as beef in certain regions, and is also a major source of export revenue for India. In many Asian regions, buffalo meat is less preferred due to its toughness; however, recipes have evolved (rendang, for example) where the slow cooking process and spices not only make the meat palatable, but also preserve it, an important factor in hot climates where refrigeration is not always available.Their hides provide tough and useful leather, often used for shoes.
BONE AND HORN PRODUCTS
The bones and horns are often made into jewellery, especially earrings. Horns are used for the embouchure of musical instruments, such as ney and kaval.
ENVIRONMENTAL EFFECTS
Wildlife conservation scientists have started to recommend and use introduced populations of feral domestic water buffalo in far-away lands to manage uncontrolled vegetation growth in and around natural wetlands. Introduced water buffalo at home in such environs provide cheap service by regularly grazing the uncontrolled vegetation and opening up clogged water bodies for waterfowl, wetland birds, and other wildlife. Grazing water buffalo are sometimes used in Great Britain for conservation grazing, such as in Chippenham Fen National Nature Reserve. The buffalo can better adapt to wet conditions and poor-quality vegetation than cattle.
Currently, research is being conducted at the Lyle Center for Regenerative Studies to determine the levels of nutrients removed and returned to wetlands when water buffalo are used for wetland vegetation management.
However, in uncontrolled circumstances, water buffalo can cause environmental damage, such as trampling vegetation, disturbing bird and reptile nesting sites, and spreading exotic weeds.
RESEARCH
The world's first cloned buffalo was developed by Indian scientists from National Dairy Research Institute, Karnal. The buffalo calf was named Samrupa. The calf did not survive more than a week, and died due to some genetic disorders. So, the scientists created another cloned buffalo a few months later, and named it Garima.
On 15 September 2007, the Philippines announced its development of Southeast Asia's first cloned buffalo. The Philippine Council for Agriculture, Forestry and Natural Resources Research and Development (PCARRD), under the Department of Science and Technology in Los Baños, Laguna, approved this project. The Department of Agriculture's Philippine Carabao Center (PCC) will implement cloning through somatic cell nuclear transfer as a tool for genetic improvement in water buffalo. "Super buffalo calves" will be produced. There will be no modification or alteration of the genetic materials, as in genetically modified organisms.
On 1 January 2008, the Philippine Carabao Center in Nueva Ecija, per Filipino scientists, initiated a study to breed a super water buffalo that could produce 4 to 18 litres of milk per day using gene-based technology. Also, the first in vitro river buffalo was born there in 2004 from an in vitro-produced, vitrified embryo, named "Glory" after President Gloria Macapagal-Arroyo. Joseph Estrada's most successful project as an opposition senator, the PCC was created through Republic Act 3707, the Carabao Act of 1992.
IN CULTURE
Some ethnic groups, such as Batak and Toraja in Indonesia and the Derung in China, use water buffalo or kerbau (called horbo in Batak or tedong in Toraja) as sacrificial animals at several festivals.
- Legend has it that the Chinese philosophical sage Laozi left China through the Han Gu Pass riding a water buffalo.
- According to Hindu lore, the god of death Yama, rides on a male water buffalo.
- The carabao subspecies is considered a national symbol in the Philippines.
- In Vietnam, water buffalo are often the most valuable possession of poor farmers: "Con trâu là đầu cơ nghiệp". They are treated as a member of the family: "Chồng cày, vợ cấy, con trâu đi bừa" ("The husband ploughs, the wife sows, water buffalo draws the rake") and are friends of the children. Children talk to their water buffalo, "Bao giờ cây lúa còn bông. Thì còn ngọn cỏ ngoài đồng trâu ăn." (Vietnamese children are responsible for grazing water buffalo. They feed them grass if they work laboriously for men.) In the old days, West Lake, Hà Nội, was named Kim Ngưu - Golden Water Buffalo.
- The Yoruban Orisha Oya (goddess of change) takes the form of a water buffalo.
FIGHTING FESTIVALS
- Pasungay Festival is held annually in the town of San Joaquin, Iloilo in the Philippines.
- Moh juj Water Buffalo fighting, is held every year in Bhogali Bihu in Assam. Ahotguri in Nagaon is famous for it.
- Do Son Water Buffalo Fighting Festival of Vietnam, held each year on the ninth day of the eighth month of the lunar calendar at Do Son Township, Haiphong City in Vietnam, is one of the most popular Vietnam festivals and events in Haiphong City. The preparations for this buffalo fighting festival begin from the two to three months earlier. The competing buffalo are selected and methodically trained months in advance. It is a traditional festival of Vietnam attached to a Water God worshipping ceremony and the Hien Sinh custom to show martial spirit of the local people of Do Son, Haiphong.
- "Hai Luu" Water Buffalo Fighting Festival of Vietnam, According to ancient records, the buffalo fighting in Hai Luu Commune has existed from the 2nd century B.C. General Lu Gia at that time, had the buffalo slaughtered to give a feast to the local people and the warriors, and organized buffalo fighting for amusement. Eventually, all the fighting buffalo will be slaughtered as tributes to the deities.
- "Ko Samui" Water Buffalo Fighting Festival of Thailand, is a very popular event held on special occasions such as New Year's Day in January, and Songkran in mid-April, this festival features head-wrestling bouts in which two male Asian water buffalo are pitted against one another. Unlike in Spanish Bullfighting, wherein bulls get killed while fighting sword-wielding men, Buffalo Fighting Festival held at Ko Samui, Thailand is fairly harmless contest. The fighting season varies according to ancient customs & ceremonies. The first Buffalo to turn and run away is considered the loser, the winning buffalo becomes worth several million baht. Ko Samui is an island in the Gulf of Thailand in the South China Sea, it is 700 km from Bangkok and is connected to it by regular flights.
- "Ma'Pasilaga Tedong" Water Buffalo Fighting Festival, in Tana Toraja Regency of Sulawesi Island, Indonesia, is a very popular event where the Rambu Solo' or a Burial Festival took place in Tana Toraja.
RACING FESTIVALS
Carabao Carroza Festival is being held annually every May in the town of Pavia, Iloilo, Philippines.
Kambala races of Karnataka, India, take place between December and March. The races are conducted by having the water buffalo (he buffalo) run in long parallel slushy ditches, where they are driven by men standing on wooden planks drawn by the buffalo. The objectives of the race are to finish first and to raise the water to the greatest height and also a rural sport. Kambala races are arranged with competition, as well as without competition and as a part of thanks giving (to god) in about 50 villages of coastal Karnataka.
In the Chonburi Province of Thailand, and in Pakistan, there are annual water buffalo races.
Chon Buri Water buffalo racing festival, Thailand In downtown Chonburi, 70 km south of Bangkok, at the annual water buffalo festival held in mid-October. About 300 buffalo race in groups of five or six, spurred on by bareback jockeys wielding wooden sticks, as hundreds of spectators cheer. The water buffalo has always played an important role in agriculture in Thailand. For farmers of Chon Buri Province, near Bangkok, it is an important annual festival, beginning in mid-October. It is also a celebration among rice farmers before the rice harvest. At dawn, farmers walk their buffalo through surrounding rice fields, splashing them with water to keep them cool before leading them to the race field. This amazing festival started over a hundred years ago when two men arguing about whose buffalo was the fastest ended up having a race between them. That’s how it became a tradition and gradually a social event for farmers who gathered from around the country in Chonburi to trade their goods. The festival also helps a great deal in preserving the number of buffalo, which have been dwindling at quite an alarming rate in other regions. Modern machinery is rapidly replacing buffalo in Thai agriculture. With most of the farm work mechanized, the buffalo-racing tradition has continued. Racing buffalo are now raised just to race; they do not work at all. The few farm buffalo which still do work are much bigger than the racers because of the strenuous work they perform. Farm buffalo are in the "Buffalo Beauty Pageant", a Miss Farmer beauty contest and a comic buffalo costume contest etc.. This festival perfectly exemplifies a favored Thai attitude to life — "sanuk," meaning fun.
Babulang Water buffalo racing festival, Sarawak, Malaysia, is the largest or grandest of the many rituals, ceremonies and festivals of the traditional Bisaya (Borneo) community of Limbang, Sarawak. Highlights are the Ratu Babulang competition and the Water buffalo races which can only be found in this town in Sarawak, Malaysia.
Vihear Suor village Water buffalo racing festival, in Cambodia, each year, people visit Buddhist temples across the country to honor their deceased loved ones during a 15-day period commonly known as the Festival of the Dead but in Vihear Suor village, about 35 km northeast of Cambodia, citizens each year wrap up the festival with a water buffalo race to entertain visitors and honour a pledge made hundreds of years ago. There was a time when many village cattle which provide rural Cambodians with muscle power to plough their fields and transport agricultural products died from an unknown disease. The villagers prayed to a spirit to help save their animals from the disease and promised to show their gratitude by holding a buffalo race each year on the last day of "P'chum Ben" festival as it is known in Cambodian. The race draws hundreds of spectators who come to see riders and their animals charge down the racing field, the racers bouncing up and down on the backs of their buffalo, whose horns were draped with colorful cloth.
Pothu puttu matsaram, Kerala, South India, is similar to Kambala races.
WIKIPEDIA
The water buffalo or domestic Asian water buffalo (Bubalus bubalis) is a large bovid originating in South Asia, Southeast Asia, and China. Today, it is also found in Europe, Australia, and some American countries. The wild water buffalo (Bubalus arnee) native to Southeast Asia is considered a different species, but most likely represents the ancestor of the domestic water buffalo.
Two extant types of water buffalo are recognized based on morphological and behavioural criteria – the river buffalo of South Asia and further west to the Balkans, Egypt, and Italy, and the swamp buffalo, found from Assam in the west through Southeast Asia to the Yangtze valley of China in the east. The origins of the domestic water buffalo types are debated, although results of a phylogenetic study indicate that the swamp type may have originated in China and was domesticated about 4,000 years ago, while the river type may have originated from India and was domesticated about 5,000 years ago. Water buffalo were traded from the Indus Valley Civilisation to Mesopotamia, in modern Iraq, 2500 BC by the Meluhhas. The seal of a scribe employed by an Akkadian king shows the sacrifice of water buffalo.
At least 130 million domestic water buffalo exist, and more human beings depend on them than on any other domestic animal. They are especially suitable for tilling rice fields, and their milk is richer in fat and protein than that of dairy cattle. The large feral population of northern Australia became established in the late 19th century, and smaller feral herds are in New Guinea, Tunisia, and northeastern Argentina. Feral herds are also present in New Britain, New Ireland, Irian Jaya, Papua New Guinea, Colombia, Guyana, Suriname, Brazil, and Uruguay.
CHARACTERISTICS
The skin of river buffalo is black, but some specimens may have dark, slate-coloured skin. Swamp buffalo have a grey skin at birth, but become slate blue later. Albinoids are present in some populations. River buffalo have comparatively longer faces, smaller girths, and bigger limbs than swamp buffalo. Their dorsal ridges extend further back and taper off more gradually. Their horns grow downward and backward, then curve upward in a spiral. Swamp buffalo are heavy-bodied and stockily built; the body is short and the belly large. The forehead is flat, the eyes prominent, the face short, and the muzzle wide. The neck is comparatively long, and the withers and croup are prominent. A dorsal ridge extends backward and ends abruptly just before the end of the chest. Their horns grow outward, and curve in a semicircle, but always remain more or less on the plane of the forehead. The tail is short, reaching only to the hocks. Height at withers is 129–133 cm for males, and 120–127 cm for females. They range in weight from 300–550 kg, but weights of over 1,000 kg have also been observed.
Tedong bonga is a black pied buffalo featuring a unique black and white colouration that is favoured by the Toraja of Sulawesi.
The swamp buffalo has 48 chromosomes; the river buffalo has 50 chromosomes. The two types do not readily interbreed, but fertile offspring can occur. Buffalo-cattle hybrids have not been observed to occur, and the embryos of such hybrids do not reach maturity in laboratory experiments.
The rumen of the water buffalo has important differences from that of other ruminants. It contains a larger population of bacteria, particularly the cellulolytic bacteria, lower protozoa, and higher fungi zoospores. In addition, higher rumen ammonia nitrogen (NH4-N) and higher pH have been found as compared to those in cattle
ECOLOGY AND BEHAVIOR
River buffalo prefer deep water. Swamp buffalo prefer to wallow in mudholes which they make with their horns. During wallowing, they acquire a thick coating of mud. Both are well adapted to a hot and humid climate with temperatures ranging from 0 °C in the winter to 30 °C and greater in the summer. Water availability is important in hot climates, since they need wallows, rivers, or splashing water to assist in thermoregulation. Some breeds are adapted to saline seaside shores and saline sandy terrain.
DIET
Water buffalo thrive on many aquatic plants and during floods, will graze submerged, raising their heads above the water and carrying quantities of edible plants. They eat reeds (quassab), a giant reed (birdi), a kind of bulrush (kaulan), water hyacinth, and marsh grasses. Some of these plants are of great value to local peoples. Others, such as water hyacinth, are a major problem in some tropical valleys, and water buffalo may help to keep waterways clear.
Green fodders are used widely for intensive milk production and for fattening. Many fodder crops are conserved as hay, chaffed, or pulped. Fodders include alfalfa, berseem and bancheri, the leaves, stems or trimmings of banana, cassava, fodder beet, halfa, ipil-ipil and kenaf, maize, oats, pandarus, peanut, sorghum, soybean, sugarcane, bagasse, and turnips. Citrus pulp and pineapple wastes have been fed safely to buffalo. In Egypt, whole sun-dried dates are fed to milk-buffalo up to 25% of the standard feed mixture.
REPRODUCTION
Swamp buffalo generally become reproductive at an older age than river breeds. Young males in Egypt, India, and Pakistan are first mated at about 3.0–3.5 years of age, but in Italy
they may be used as early as 2 years of age. Successful mating behaviour may continue until the animal is 12 years or even older. A good river male can impregnate 100 females in a year. A strong seasonal influence on mating occurs. Heat stress reduces libido
Although buffalo are polyoestrous, their reproductive efficiency shows wide variation throughout the year. Buffalo cows exhibit a distinct seasonal change in displaying oestrus, conception rate, and calving rate. The age at first oestrus of heifers varies between breeds from 13–33 months, but mating at the first oestrus is often infertile and usually deferred until they are 3 years old. Gestation lasts from 281–334 days, but most reports give a range between 300 and 320 days. Swamp buffalo carry their calves for one or two weeks longer than river buffalo. It is not rare to find buffalo that continue to work well at the age of 30, and instances of a working life of 40 years are recorded.
TAXONOMIC HISTORY
Carl Linnaeus first described the genus Bos and the water buffalo under the binomial Bubalis bubalus in 1758; the latter was known to occur in Asia and as a domestic form in Italy. Ellerman and Morrison-Scott treated the wild and domestic forms of the water buffalo as conspecifics whereas others treated them as different species. The nomenclatorial treatment of wild and domestic forms has been inconsistent and varies between authors and even within the works of single authors.
In March 2003, the International Commission on Zoological Nomenclature achieved consistency in the naming of wild and domestic water buffalo by ruling that the scientific name Bubalus arnee is valid for the wild form. B. bubalis continues to be valid for the domestic form and applies also to feral populations.
DOMESTICATION AND BREEDING
Water buffalo were domesticated in India about 5000 years ago, and in China about 4000 years ago. Two types are recognized, based on morphological and behavioural criteria – the river buffalo of the Indian subcontinent and further west to the Balkans and Italy, and the swamp buffalo, found from Assam in the west through Southeast Asia to the Yangtze valley of China in the east. The present-day river buffalo is the result of complex domestication processes involving more than one maternal lineage and a significant maternal gene flow from wild populations after the initial domestication events. Twenty-two breeds of the river type water buffalo are known, including Murrah, Nili-Ravi, Surti, Jafarabadi, Anatolian, Mediterranean, and Egyptian buffalo. China has a huge variety of buffalo genetic resources, comprising 16 local swamp buffalo breeds in various regions.
Results of mitochondrial DNA analyses indicate that the two types were domesticated independently. Sequencing of cytochrome b genes of Bubalus species implies that the domestic buffalo originated from at least two populations, and that the river and the swamp types have differentiated at the full species level. The genetic distance between the two types is so large that a divergence time of about 1.7 million years has been suggested. The swamp type was noticed to have the closest relationship with the tamaraw.
DISTRIBUTION OF POPULATIONS
The water buffalo population in the world is about 172 million.
IN ASIA
More than 95.8% of the world population of water buffalo are found in Asia including both river and swamp types. The water buffalo population in India numbered over 97.9 million head in 2003, representing 56.5% of the world population. They are primarily of the river type, with 10 well-defined breeds comprising Badhawari, Murrah, Nili-Ravi, Jafarabadi, Marathwada, Mehsana, Nagpuri, Pandharpuri, Toda, and Surti. Swamp buffalo occur only in small areas in the north-eastern part of the country and are not distinguished into breeds.
In 2003, the second-largest population lived in China, with 22.759 million head, all of the swamp type with breeds kept only in the lowlands, and other breeds kept only in the mountains; as of 2003, 3.2 million swamp-type carabao buffalo were in the Philippines, nearly three million swamp buffalo were in Vietnam, and 772,764 buffalo were in Bangladesh. About 750,000 head were estimated in Sri Lanka in 1997.
The water buffalo is the main dairy animal in Pakistan, with 23.47 million head in 2010. Of these, 76% are kept in the Punjab. The rest of them are mostly in the province of Sindh. Breeds used are Nili-Ravi, Kundi, and Azi Kheli. Karachi has the largest population of water buffalos for an area where fodder is not grown, consisting of 350,000 head kept mainly for milking.
In Thailand, the number of water buffalo dropped from more than 3 million head in 1996 to less than 1.24 million head in 2011. Slightly over 75% of them are kept in the country's northeastern region. The statistics also indicate that by the beginning of 2012, less than one million were in the country, partly as a result of illegal shipments to neighboring countries where sales prices are higher than in Thailand.
Water buffalo are also present in the southern region of Iraq, in the marshes. These marshes were drained by Saddam Hussein in 1991 in an attempt to punish the south for the uprisings of 1991. Following 2003, and the fall of the Saddam regime, these lands were reflooded and a 2007 report in the provinces of Maysan and Thi Qar shows a steady increase in the number of water buffalo. The report puts the number at 40,008 head in those two provinces.
IN EUROPE AND THE MEDITERRANEAN
Water buffalo likely were introduced to Europe from India or other Oriental countries. To Italy they were introduced about the year 600 in the reign of the Longobard King Agilulf. As they appear in the company of wild horses, they probably were a present from the Khan of the Avars, a Turkic nomadic tribe that dwelt near the Danube River at the time. Sir H. Johnston knew of a herd of water buffalo presented by a King of Naples to the Bey of Tunis in the mid-19th century that had resumed the feral state in northern Tunis.
European buffalo are all of the river type and considered to be of the same breed named Mediterranean buffalo. In Italy, the Mediterranean type was particularly selected and is called Mediterranean Italian breed to distinguish it from other European breeds, which differ genetically. Mediterranean buffalo are also found in Romania, Bulgaria, Greece, Albania, Kosovo, and the Republic of Macedonia, with a few hundred in the United Kingdom, Germany, the Netherlands, Switzerland, and Hungary. Little exchange of breeding buffalo has occurred among countries, so each population has its own phenotypic features and performances. In Bulgaria, they were crossbred with the Indian Murrah breed, and in Romania, some were crossbred with Bulgarian Murrah. Populations in Turkey are of the Anatolian buffalo breed.
IN AUSTRALIA
Between 1824 and 1849, water buffalo were introduced into the Northern Territory from Timor, Kisar, and probably other islands in the Indonesian archipelago. In 1886, a few milking types were brought from India to Darwin. They have been the main grazing animals on the subcoastal plains and river basins between Darwin and Arnhem Land since the 1880s. In the early 1960s, an estimated population of 150,000 to 200,000 buffalo were living in the plains and nearby areas.
They became feral and are causing significant environmental damage. Buffalo are also found in the Top End. As a result, they were hunted in the Top End from 1885 until 1980. The commencement of the brucellosis and tuberculosis campaign (BTEC) resulted in a huge culling program to reduce buffalo herds to a fraction of the numbers that were reached in the 1980s. The BTEC was finished when the Northern Territory was declared free of the disease in 1997. Numbers dropped dramatically as a result of the campaign, but have since recovered to an estimated 150,000 animals across northern Australia in 2008.
During the 1950s, buffalo were hunted for their skins and meat, which was exported and used in the local trade. In the late 1970s, live exports were made to Cuba and continued later into other countries. Buffalo are now crossed with riverine buffalo in artificial insemination programs, and may be found in many areas of Australia. Some of these crossbreds are used for milk production. Melville Island is a popular hunting location, where a steady population up to 4,000 individuals exists. Safari outfits are run from Darwin to Melville Island and other locations in the Top End, often with the use of bush pilots. The horns, which can measure up to a record of 3.1 m tip-to-tip, are prized hunting trophies.
The buffalo have developed a different appearance from the Indonesian buffalo from which they descend. They live mainly in freshwater marshes and billabongs, and their territory range can be quite expansive during the wet season. Their only natural predators in Australia are adult saltwater crocodiles, with whom they share the billabongs, and dingoes, which have been known to prey on buffalo calves and occasionally adult buffalo when the dingoes are in large packs.
Buffalo were exported live to Indonesia until 2011, at a rate of about 3000 per year. After the live export ban that year, the exports dropped to zero, and had not resumed as of June 2013.
IN SOUTH AMERICA
Water buffalo were introduced into the Amazon River basin in 1895. They are now extensively used there for meat and dairy production. In 2005, the buffalo herd in the Brazilian Amazon stood at roughly 1.6 million head, of which 460,000 were located in the lower Amazon floodplain. Breeds used include Mediterranean from Italy, Murrah and Jafarabadi from India, and Carabao from the Philippines.
During the 1970s, small herds were imported to Costa Rica, Ecuador, Cayenne, Panama, Surinam, Guyana, and Venezuela.
In Argentina, many game ranches raise water buffalo for commercial hunting
IN NORTH AMERICA
In 1974, four water buffalo were imported to the United States from Guam to be studied at the University of Florida. In February 1978, the first herd arrived for commercial farming. Until 2002, only one commercial breeder was in the United States. Water buffalo meat is imported from Australia. Until 2011, water buffalo were raised in Gainesville, Florida, from young obtained from zoo overflow. They were used primarily for meat production, frequently sold as hamburger.[38] Other US ranchers use them for production of high-quality mozzarella cheese.
HUSBANDRY
The husbandry system of water buffalo depends on the purpose for which they are bred and maintained. Most of them are kept by people who work on small farms in family units. Their buffalo live in very close association with them, and are often their greatest capital asset. The women and girls in India generally look after the milking buffalo while the men and boys are concerned with the working animals. Throughout Asia, they are commonly tended by children who are often seen leading or riding their charges to wallowing places. Water buffalo are the ideal animals for work in the deep mud of paddy fields because of their large hooves and flexible foot joints. They are often referred to as "the living tractor of the East". It probably is possible to plough deeper with buffalo than with either oxen or horses. They are the most efficient and economical means of cultivation of small fields. In most rice-producing countries, they are used for threshing and for transporting the sheaves during the rice harvest. They provide power for oilseed mills, sugarcane presses, and devices for raising water. They are widely used as pack animals, and in India and Pakistan also for heavy haulage. In their invasions of Europe, the Turks used buffalo for hauling heavy battering rams. Their dung is used as a fertilizer, and as a fuel when dried.
Buffalo contribute 72 million tones of milk and three million tones of meat annually to world food, much of it in areas that are prone to nutritional imbalances. In India, river-type buffalo are kept mainly for milk production and for transport, whereas swamp-type buffalo are kept mainly for work and a small amount of milk.
DAIRY PRODUCTS
Water buffalo milk presents physicochemical features different from that of other ruminant species, such as a higher content of fatty acids and proteins. The physical and chemical parameters of swamp and river type water buffalo milk differ. Water buffalo milk contains higher levels of total solids, crude protein, fat, calcium, and phosphorus, and slightly higher content of lactose compared with those of cow milk. The high level of total solids makes water buffalo milk ideal for processing into value-added dairy products such as cheese. The conjugated linoleic acid (CLA) content in milk ranged from 4.4 mg/g fat in September to 7.6 mg/g fat in June. Seasons and genetics may play a role in variation of CLA level and changes in gross composition of the water buffalo milk.
Water buffalo milk is processed into a large variety of dairy products:
- Cream churns much faster at higher fat levels and gives higher overrun than cow cream.
- Butter from water buffalo cream displays more stability than that from cow cream.
- Ghee from water buffalo milk has a different texture with a bigger grain size than ghee from cow milk.
- Heat-concentrated milk products in the Indian subcontinent include paneer, khoa, rabri, kheer and basundi.
- Fermented milk products include dahi, yogurt, and chakka.
- Whey is used for making ricotta and mascarpone in Italy, and alkarish in Syria and Egypt.
- Soft cheeses made include mozzarella in Italy, karish, mish, and domiati in Egypt, madhfor in Iraq, alghab in Syria, kesong puti in the Philippines, and vladeasa in Romania.
- The semihard cheese beyaz peynir is made in Turkey.
- Hard cheeses include braila in Romania, rahss in Egypt, white brine in Bulgaria, and akkawi in Syria.
- Watered-down buffalo milk is used as a cheaper alternative to regular milk.
MEAT AND SKIN PRODUCTS
Water buffalo meat, sometimes called "carabeef", is often passed off as beef in certain regions, and is also a major source of export revenue for India. In many Asian regions, buffalo meat is less preferred due to its toughness; however, recipes have evolved (rendang, for example) where the slow cooking process and spices not only make the meat palatable, but also preserve it, an important factor in hot climates where refrigeration is not always available.Their hides provide tough and useful leather, often used for shoes.
BONE AND HORN PRODUCTS
The bones and horns are often made into jewellery, especially earrings. Horns are used for the embouchure of musical instruments, such as ney and kaval.
ENVIRONMENTAL EFFECTS
Wildlife conservation scientists have started to recommend and use introduced populations of feral domestic water buffalo in far-away lands to manage uncontrolled vegetation growth in and around natural wetlands. Introduced water buffalo at home in such environs provide cheap service by regularly grazing the uncontrolled vegetation and opening up clogged water bodies for waterfowl, wetland birds, and other wildlife. Grazing water buffalo are sometimes used in Great Britain for conservation grazing, such as in Chippenham Fen National Nature Reserve. The buffalo can better adapt to wet conditions and poor-quality vegetation than cattle.
Currently, research is being conducted at the Lyle Center for Regenerative Studies to determine the levels of nutrients removed and returned to wetlands when water buffalo are used for wetland vegetation management.
However, in uncontrolled circumstances, water buffalo can cause environmental damage, such as trampling vegetation, disturbing bird and reptile nesting sites, and spreading exotic weeds.
RESEARCH
The world's first cloned buffalo was developed by Indian scientists from National Dairy Research Institute, Karnal. The buffalo calf was named Samrupa. The calf did not survive more than a week, and died due to some genetic disorders. So, the scientists created another cloned buffalo a few months later, and named it Garima.
On 15 September 2007, the Philippines announced its development of Southeast Asia's first cloned buffalo. The Philippine Council for Agriculture, Forestry and Natural Resources Research and Development (PCARRD), under the Department of Science and Technology in Los Baños, Laguna, approved this project. The Department of Agriculture's Philippine Carabao Center (PCC) will implement cloning through somatic cell nuclear transfer as a tool for genetic improvement in water buffalo. "Super buffalo calves" will be produced. There will be no modification or alteration of the genetic materials, as in genetically modified organisms.
On 1 January 2008, the Philippine Carabao Center in Nueva Ecija, per Filipino scientists, initiated a study to breed a super water buffalo that could produce 4 to 18 litres of milk per day using gene-based technology. Also, the first in vitro river buffalo was born there in 2004 from an in vitro-produced, vitrified embryo, named "Glory" after President Gloria Macapagal-Arroyo. Joseph Estrada's most successful project as an opposition senator, the PCC was created through Republic Act 3707, the Carabao Act of 1992.
IN CULTURE
Some ethnic groups, such as Batak and Toraja in Indonesia and the Derung in China, use water buffalo or kerbau (called horbo in Batak or tedong in Toraja) as sacrificial animals at several festivals.
- Legend has it that the Chinese philosophical sage Laozi left China through the Han Gu Pass riding a water buffalo.
- According to Hindu lore, the god of death Yama, rides on a male water buffalo.
- The carabao subspecies is considered a national symbol in the Philippines.
- In Vietnam, water buffalo are often the most valuable possession of poor farmers: "Con trâu là đầu cơ nghiệp". They are treated as a member of the family: "Chồng cày, vợ cấy, con trâu đi bừa" ("The husband ploughs, the wife sows, water buffalo draws the rake") and are friends of the children. Children talk to their water buffalo, "Bao giờ cây lúa còn bông. Thì còn ngọn cỏ ngoài đồng trâu ăn." (Vietnamese children are responsible for grazing water buffalo. They feed them grass if they work laboriously for men.) In the old days, West Lake, Hà Nội, was named Kim Ngưu - Golden Water Buffalo.
- The Yoruban Orisha Oya (goddess of change) takes the form of a water buffalo.
FIGHTING FESTIVALS
- Pasungay Festival is held annually in the town of San Joaquin, Iloilo in the Philippines.
- Moh juj Water Buffalo fighting, is held every year in Bhogali Bihu in Assam. Ahotguri in Nagaon is famous for it.
- Do Son Water Buffalo Fighting Festival of Vietnam, held each year on the ninth day of the eighth month of the lunar calendar at Do Son Township, Haiphong City in Vietnam, is one of the most popular Vietnam festivals and events in Haiphong City. The preparations for this buffalo fighting festival begin from the two to three months earlier. The competing buffalo are selected and methodically trained months in advance. It is a traditional festival of Vietnam attached to a Water God worshipping ceremony and the Hien Sinh custom to show martial spirit of the local people of Do Son, Haiphong.
- "Hai Luu" Water Buffalo Fighting Festival of Vietnam, According to ancient records, the buffalo fighting in Hai Luu Commune has existed from the 2nd century B.C. General Lu Gia at that time, had the buffalo slaughtered to give a feast to the local people and the warriors, and organized buffalo fighting for amusement. Eventually, all the fighting buffalo will be slaughtered as tributes to the deities.
- "Ko Samui" Water Buffalo Fighting Festival of Thailand, is a very popular event held on special occasions such as New Year's Day in January, and Songkran in mid-April, this festival features head-wrestling bouts in which two male Asian water buffalo are pitted against one another. Unlike in Spanish Bullfighting, wherein bulls get killed while fighting sword-wielding men, Buffalo Fighting Festival held at Ko Samui, Thailand is fairly harmless contest. The fighting season varies according to ancient customs & ceremonies. The first Buffalo to turn and run away is considered the loser, the winning buffalo becomes worth several million baht. Ko Samui is an island in the Gulf of Thailand in the South China Sea, it is 700 km from Bangkok and is connected to it by regular flights.
- "Ma'Pasilaga Tedong" Water Buffalo Fighting Festival, in Tana Toraja Regency of Sulawesi Island, Indonesia, is a very popular event where the Rambu Solo' or a Burial Festival took place in Tana Toraja.
RACING FESTIVALS
Carabao Carroza Festival is being held annually every May in the town of Pavia, Iloilo, Philippines.
Kambala races of Karnataka, India, take place between December and March. The races are conducted by having the water buffalo (he buffalo) run in long parallel slushy ditches, where they are driven by men standing on wooden planks drawn by the buffalo. The objectives of the race are to finish first and to raise the water to the greatest height and also a rural sport. Kambala races are arranged with competition, as well as without competition and as a part of thanks giving (to god) in about 50 villages of coastal Karnataka.
In the Chonburi Province of Thailand, and in Pakistan, there are annual water buffalo races.
Chon Buri Water buffalo racing festival, Thailand In downtown Chonburi, 70 km south of Bangkok, at the annual water buffalo festival held in mid-October. About 300 buffalo race in groups of five or six, spurred on by bareback jockeys wielding wooden sticks, as hundreds of spectators cheer. The water buffalo has always played an important role in agriculture in Thailand. For farmers of Chon Buri Province, near Bangkok, it is an important annual festival, beginning in mid-October. It is also a celebration among rice farmers before the rice harvest. At dawn, farmers walk their buffalo through surrounding rice fields, splashing them with water to keep them cool before leading them to the race field. This amazing festival started over a hundred years ago when two men arguing about whose buffalo was the fastest ended up having a race between them. That’s how it became a tradition and gradually a social event for farmers who gathered from around the country in Chonburi to trade their goods. The festival also helps a great deal in preserving the number of buffalo, which have been dwindling at quite an alarming rate in other regions. Modern machinery is rapidly replacing buffalo in Thai agriculture. With most of the farm work mechanized, the buffalo-racing tradition has continued. Racing buffalo are now raised just to race; they do not work at all. The few farm buffalo which still do work are much bigger than the racers because of the strenuous work they perform. Farm buffalo are in the "Buffalo Beauty Pageant", a Miss Farmer beauty contest and a comic buffalo costume contest etc.. This festival perfectly exemplifies a favored Thai attitude to life — "sanuk," meaning fun.
Babulang Water buffalo racing festival, Sarawak, Malaysia, is the largest or grandest of the many rituals, ceremonies and festivals of the traditional Bisaya (Borneo) community of Limbang, Sarawak. Highlights are the Ratu Babulang competition and the Water buffalo races which can only be found in this town in Sarawak, Malaysia.
Vihear Suor village Water buffalo racing festival, in Cambodia, each year, people visit Buddhist temples across the country to honor their deceased loved ones during a 15-day period commonly known as the Festival of the Dead but in Vihear Suor village, about 35 km northeast of Cambodia, citizens each year wrap up the festival with a water buffalo race to entertain visitors and honour a pledge made hundreds of years ago. There was a time when many village cattle which provide rural Cambodians with muscle power to plough their fields and transport agricultural products died from an unknown disease. The villagers prayed to a spirit to help save their animals from the disease and promised to show their gratitude by holding a buffalo race each year on the last day of "P'chum Ben" festival as it is known in Cambodian. The race draws hundreds of spectators who come to see riders and their animals charge down the racing field, the racers bouncing up and down on the backs of their buffalo, whose horns were draped with colorful cloth.
Pothu puttu matsaram, Kerala, South India, is similar to Kambala races.
WIKIPEDIA
Midtown Manhattan, New York City, New York, United States
The ground floor and mezzanine floor interior of the RCA Building, built in 1931-33, is one of the major components of What is the largest and most important buildings constructed at Rockefeller Center. As the RCA Building in its form and siting is the focus of the major east-west axis running through the Center from Fifth to Sixth Avenues, so is its ground floor and mezzanine floor interior an important continuation of that axis. The double-height entrance lobby symbolically welcomes visitors, drawing them from the Rockefeller Plaza entrance, past the information desk, into corridors flanked by shops, which create the sense of a grand concourse, and leading to six elevator banks with high-speed elevators which efficiently carry tenants and visitors up into the 70-story building. The experience of the visitor to the ground floor and mezzanine floor interior is enhanced by the extensive program of murals, executed by Jose Maria Sert and Frank Brangwyn, which were conceived as an intrinsic part of the building and a continuation of the overall art scheme used on the exteriors of the Rockefeller Center buildings.
The RCA Building and Rockefeller Center
Rockefeller Center is one of the most important architectural projects ever undertaken in America. It was unprecedented in scope, near visionary in its urban planning and unequalled for its harmonious integration of architecture, art and landscaping. The complex grew out of an ill-fated plan to build new midtown quarters for the Metropolitan Opera Company. When the original scheme collapsed, the project was transformed into the private commercial enterprise of John D. Rockefeller, Jr. Construction of the original complex began in 1931 and ended with the completion of the fourteenth building in 1939.
John D. Rockefeller, Jr. (1874-1960) was born in Cleveland, Ohio. After graduating from Brown University in 1897 he joined his father's office and for some years held directorships of such businesses as the Standard Oil Company of New Jersey, United States Steel Corporation and Missouri Pacific Railroad among others. By about 1911, however, Rockefeller had become almost totally involved with philanthropic, civic, educational and religious enterprises such as the Rockefeller Institute for Medical Research, the Rockefeller Foundation, Rockefeller Sanitary Commission and International Education Board to name a few only. A devout Baptist, he also founded the Institute for Social and Religious Research and funded construction of Riverside Church (1927-30). The latter was just one of the many architectural undertakings which Rockefeller sponsored.
He also funded the restoration of the palaces at Fontainebleau and Versailles and Reims Cathedral in France, the Agora and Stoa of Attolos in Athens, and in America, Washington Irving's "Sunnyside" heme, Colonial Williamsburg and the birthplace of George Washington. He also supplied the land for the Museum of Modem Art, for the Rockefeller Institute and Fort Tryon where he built the Cloisters. later, in 1946, Rockefeller donated land for the construction of the United Nations along the East River and gave generously to Lincoln Center for the Performing Arts. Although never an opera devotee, he supported the Metropolitan Opera project as just one more worthy civic and cultural cause.
Rockefeller's involvement in the project to relocate the Metropolitan Opera began on May 21, 1928, when Benjamin Morris presented the scheme to potential investors during a dinner at the Metropolitan Club. Among the guests was Ivy Lee, Rockefeller's public relations manager. He recommended the proposal to his employer, noting that it would "make the [Opera] Square and the immediate surroundings the most valuable shopping district in the world." Rockefeller was interested. He, his sister and father lived in three large houses on W. 53rd and 54th Streets (just three blocks north of the proposed Opera site) and owned a good deal of real estate in the area. Development of a cultural center would insure the quality of his neighborhood while increasing the value of his speculative properties. But before making any commitment, Rockefeller sought development advice from prominent real estate advisors, the Todd, Robertson & Todd Engineering Corp. among them.
John Reynard Todd (1867-1945) was a lawyer who, in partnership with Henry Clay Irons, became accidentally involved in construction and rentals. Todd & Irons developed their building activities into a lucrative business through which they erected and sold at large profits numerous hotels, apartments and commercial structures. Among them was the Cunard Building whose lobby was designed by Benjamin Morris and which stood directly across the street from Rockefeller's Standard Oil Building at 26 Broadway. When Irons retired in 1919 Todd went into partnership with his physician brother, Dr. James M. Todd (c. 1870-1939), and Hugh S. Robertson (1880-1951), a specialist in real estate and financial management. Together they were responsible for the internal planning, construction and rental of the Ritz and Barclay Hotels, Postum Building and the fabulously successful Graybar Building which they linked to Grand Central Terminal with corridors.
John R. Todd was the personal friend of Thomas M. Debevoise and Charles O. Heydt, Rockefeller's legal and real estate advisors and it was due to them that he became involved in the Opera project. It was through Debevoise that Todd's son Webster (in the engineering firm of Todd & [Joseph O.] Brown) was engaged in Rockefeller's restoration of Colonial Williamsburg in 1928. And through Heydt that Todd, his brother and Robertson were hired to develop Rockefeller's midtown complex. Heydt informed Rockefeller that Todd had been involved "in very large enterprises, [had] architects in his own office, and--[had] never made a failure. He [understood] thoroughly the matter of financing the construction of large buildings...and would be in a position to help prospective tenants...construct their own buildings." Todd, he said, was "a hard-headed business man."Todd, Robertson & Todd was one of five real estate firms to advise Rockefeller on the development potential of the Opera project in autumn, 1928.
In addition to the Opera and its plaza (to be designed by Benjamin Morris), the firm recommended a remarkably progressive mixed use complex including hotels, apartment and office buildings, a shopping arcade and department store (the latter in continuation of the development of Fifth Avenue with such fashionable counterparts as Saks and Altmans). The plan also included two new private streets and a lower level for vehicular traffic, parking and freight deliveries. The scheme was prepared over Labor Day weekend, 1928 by two little known, 38 year old architects on Todd's staff: L. Andrew Reinhard and Hairy Hofmeister.
Under Todd's directive, Reinhard & Hofmeister prepared an improved plan in mid-September, 1928. Two weeks later (October 1, 1928) Rockefeller made a commitment to lease from Columbia College the three blocks between 48th-51st Streets. The land stretched west from Fifth Avenue but stopped short of Sixth Avenue where street frontage was privately owned. (In subsequent years Rockefeller acquired the western lots as well). The Columbia contract was not actually signed until December 31, 1928, at which point Rockefeller agreed to pay approximately $3.5 million annual rent during 1928-1952 with options for three 21-year renewals.
On October 1, 1929 (precisely a year after Rockefeller agreed to lease the Columbia property) Todd, Robertson & Todd were appointed managers of the project. Their mandate was to "build the thing, put it on a profitable basis, and sell it to the world." By the end of October their staff architects (Reinhard & Hofmeister) were named architects of the development. They were experienced in the internal layouts preferred by Todd and familiar with his theory that "business property income production supercedes pure aesthetics." Todd recommended at the same time that Harvey Corbett and Benjamin Morris be engaged as consulting architects (although the latter declined after December, 1929). He also suggested employment of Raymond Hood, the man of ideas whose reputation as a leading skyscraper designer had skyrocketed in recent years.
Todd selected architects "who would be primarily interested in good planning, utility, cost, income, low operating expenses and progress...[men who were not too] committed to the architectural past [nor] too much interested in wild modemism."[6] The pooling of eight different talents from three different firms allowed for a division of labor and for an undertaking too large for most private offices of the day. Architecture by committee modified the singular dominance of any one personality, but also seems to have generated competition and controversy. The situation was resolved in February 1930, when the architects united in a collective known as the Associated Architects. Thereafter all drawings bear the three firm names in strict alphabetical order: Corbett, Harrison & MacMurray; Hood, Godley (until 1931) & Fouilhoux; Reinhard & Hofineister.
The Associated Architects
Corbett, Harrison & MacMurray
Harvey Wiley Corbett (1873-1954) was born to physician parents in San Francisco, California. He was educated at the University of California (1895), the Ecole des Beaux Arts in Paris (1906) and the atelier of the historistic Jean Louis Pascal. Between 1903 and 1912 he was in partnership with F. Livingston Pell and between 1912 and 1928 with Frank J. Helmle. While a lecturer at the School of Architecture of Columbia University (1907-11, 1920-35), Corbett trained many students in the "Atelier Colurttoia," which was modeled after the system of the Ecole des Beaux Arts. One of Corbett's major works was the Bush Terminal Building on W. 42nd Street (1923) which established his reputation as a practitioner of "modern" architecture. Its success led Irwin Bush to commission from Corbett designs for the $10,000,000 Bush House in London. Dedicated to "the friendship to English speaking peoples," this American-English center was to find its counterpart in the British Empire Building at Rockefeller Center.
Corbett was an early and strong advocate of the skyscraper as an urban building form and wrote and lectured extensively in support of this concept. He was a practical architect who envisioned the future city with super-block skyscrapers, tiered streets and multi-level transportation systems. Corbett had a reputation as a skilled planner who worked within budget while remaining aware of the city scape and urban design. He acted as a consultant to the Regional Plan Association and served on the architectural planning committees for the 1933 Chicago Century of Progress Exposition (beginning in 1929) and the 1939 New York World's Fair.
Corbett was a fellow of both the American Institute of Architects and the Royal Institute of British Architects and received honorary degrees from the University of California, the University of Liverpool and Columbia University. He was a member of the Fine Arts Commission of the State of New York and served as president of the Architectural League of New York and the National Arts Society.
Corbett submitted his "Symposium" design after the retirement of Frank Helmle in 1928 and his establishment of a new partnership with William MacMurray and Wallace Harrison. Together they designed the Roerich Museum and Master Apartments on Riverside Drive in New York and the Horace Bushnell Memorial Hall in Hartford, Connecticut. Because of the latter experience in theater design and because of Corbett*s formidable reputation, the Rockefeller developers were anxious to secure the firm's expertise.
William H. MacMurray (1868-1941) became associated with Corbett same time before 1927. His prime concern was the partnership's business affairs. He had little to do with the design of the Rockefeller Center project. Wallace K. Harrison (1895-1982), by contrast, was very much involved in matters of design and after the death of Raymond Hood in 1934 he exerted an increasingly strong influence on Rockefeller Center's architectural form. He was also responsible for one of the Center's new buildings on the west side of Sixth Avenue.
Harrison was born to a foundry superintendent in Worcester, Massachusetts. He quit school at 14 to take a $5.00/wk job as an office boy with the contracting firm of O.W. Norcross, simultaneously attending Worcester Polytechnic Institute. In 1915 he became a draftsman in the New York office of McKim, Mead & White and attended evening classes at the atelier of Harvey Corbett. In 1917 Harrison enrolled in the Ecole des Beaux Arts. He then returned briefly to McKim, Mead & White before winning a Rotch Traveling Scholarship and a year at the American Academy in Rome. Upon his return to New York in 1922 Harrison became a draftsman for Bertram Goodhue who was then engaged on the Nebraska State Capitol. In 1926 Harrison married Ellen Milton whose brother was the son-in-law of John D. Rockefeller, Jr. and in the following year, joined in partnership with Corbett, Helmle (soon to retire) and MacMurray.
In 1935 Harrison left Corbett's office and formed a partnership with J. Andre Fouilhoux who had worked with Raymond Hood until the latter's death in 1934. Six years later Max Abramowitz (1908-1959) was taken on as a partner. When Fouilhoux died in 1945 the firm survived as Harrison & Abramowitz and went on to become one of the most successful postwar architectural concerns in America. Included among its works are parts of Lincoln Center for the Performing Arts, Nelson Rockefeller's Empire State Plaza in Albany and the United Nations (for which Rockefeller donated the land in 1946). In 1967 Harrison was awarded the gold medal of the American Institute of Architects for his "demonstrated ability to lead a team in producing significant architectural works of high quality over a period of more than 30 years." Hood, Godley & Fouilhoux.
Raymond Mathewson Hood (1881-1934) was born in Pawtucket, Rhode Island. He studied at Brown University before transferring to the Massachusetts Institute of Technology in 1900 and later, the Ecole des Beaux Arts in Paris (1905, 1908-10). As a draftsman he was employed in the offices of Cram, Goodhue & Ferguson, Boston; Palmer, Hornbostel & Jones, New York; and Henry Hornbostel, Pittsburgh. He set up his own office in New York in 1914, but did not achieve any great architectural success until 1922. In that year John Mead Howell asked Hood to join him in submitting a design for the Chicago Tribune competition. Their winning scheme was a soaring tower terminating in setback peaks and flying buttresses of neo-Gothic design, distinguished by its logical plan and clarity of design.
The competition established Hood's reputation as a skyscraper designer and brought his firm several notable commissions: the American Radiator Building, Daily News Building and the McGraw Hill Building, all in New York City, and all in the years immediately preceding Rockefeller's development. Hood was also associated with Harvey Corbett on plans for the Chicago Century of Progress Exposition of 1933.[10] His good working relationship with Corbett, together with Hood's originality and the publicity generated by his previous skyscraper designs, were positive factors in his selection for the new complex. Before his premature death in 1934, Hood played a dominant role in the design of Rockefeller Center. He was responsible for the introduction of building setbacks and rooftop gardens, the establishment of uniformly low-rise elevations along Fifth Avenue and significantly, the suggestion to bring the radio industry to the Center.
Hood was a fellow of the American Institute of Architects, a president of the Architectural League of New York, and a trustee of the Beaux Arts Institute of Design. He received the Medal of Honor of the Architectural League in 1926, and in 1940 was posthumously awarded a gold medal from the New York Chapter of the AIA.
Hood brought to the Center Godley and Fouilhoux, his partners since the mid 1920s. Frederick A. Godley (1887-1961) received his B.A. from Yale University (1908), an M.A. from the Massachusetts Institute of Technology (1910) and a diploma of architecture from the Ecole des Beaux Arts (1913). After working in the Boston architectural office of Guy Lowell, he established his own firm in 1915 (Godley & Haskell, 1913-18; Godley & Sedgwick, 1918-24). In 1924 he joined Raymond Hood in the firm of Hood, Godley & Fouilhoux, specializing in the business affairs of the office. He left the firm in 1931, while the Rockefeller Center project was underway, to join the faculty of the Yale University School of Architecture, where he taught until 1947. Godley was also a fellow of the American Institute of Architects and chairman of the educational committee of the Beaux Arts Institute of Design.
Jacques Andre Fouilhoux (1879-1945), a Paris-born engineer, received his training at the Ecole Centrale des Arts et Manufactures. Emigrating to the United States in 1904, he established the firm of Fouilhoux & Whiteside in Port 1 and, Oregon in 1908. He later worked for Albert Kahn, noted industrial architect, in Detroit, among others. After World War I Fouilhoux moved to New York where he formed a partnership with Raymond Hood in 1927. Following Hood's death, Fouilhoux became partners with Wallace K. Harrison (formerly of Corbett, Harrison & MacMurray) and together they continued to be involved with Rockefeller Center. With their new partner Max Abramowitz they designed the Rockefeller Apartments, general plans, major buildings, Trylon and Perisphere for the New York World's Fair of 1939. In collaboration with others Fouilhoux designed the Fort Greene and Clinton Hill housing projects in Brooklyn.
He fell to his death from one of their roofs in 1945. Fouilhoux was a fellow of the American Institute of Arch tects and served as treasurer of the Beaux-Arts Institute of Design. Reinhard Hofmeister I. Andrew Reinhard (1891-1964) was the son of a carpenter-cabinet maker who, at age 14, became an office boy for Benjamin Morris (the architect initially commissioned to design the new Opera). Reinhard then studied at the Mechanics Institute in New York and finished his formal education at the Beaux-Arts Society of Design. He then returned to Morris' firm as a junior designer and worked in other prominent offices, notably that of Raymond Hood (who would later make some of the greatest contributions to Rockefeller Center). Reinhard then spent eight years with Todd, Robertson & Todd during which time he and Hofmeister worked en rentals and interior layouts for the Graybar Building. In 1928 Reinhard & Hofmeister formed a partnership.
Henry Hofmeister (1891-1962) was a self-trained architect who, after only two years of high school, joined the firm of Warren & Wetmore. He worked there for 17 years before joining Todd, Robertson & Todd. Hofmeister acquired a reputation for being methodical and having a good knowledge of such practical matters as plumbing, ventilation and efficient interior layouts. He organized the Rockefeller Center architectural office and supervised the preparation of the necessary architectural drawings. He was, according to Reinhard, "the man who got the work out." Following the completion of Rockefeller Center, the partners received gold medals for their work from the Architectural league of New York and the Fifth Avenue Association.
Other works later executed by Reinhard & Hofmeister include the World's Fair Hall of Music of 1939 (which has many spatial similarities to Radio City Music Hall); the Federal Building at John F. Kennedy International Airport; the Chrysler Building East; buildings for the New York Medical College; Chase Manhattan Bank; the Italian, Swedish and Waterman steamship lines? the Dun and Bradstreet home office building in New York; the surgical building and research center of the New England Medical Center in Boston? the Deeds Carillon Tower in Dayton, Ohio; and the World War II American cemetery chapel at Neuville en Condroz in Belgium. In 1947 the firm expanded as Reinhard, Hoftneister & Walquist, but dissolved upon Reinhard's retirement in 1956.
Reinhard was a member of the National Commission of Fine Arts in Washington in 1945-50, a fellow of the American Institute of Architects, and served as an officer of the New York Chapter of the AIA, the Architectural league and Municipal Art Society. Hofmeister served as a consultant during World War II to Nelson Rockefeller, then coordinator of Inter--American Affairs with the state Department- He was a member of the American Institute of Architects, the New York Building Congress and the Architectural league of New York, directing the League's program for aiding unemployed or needy architects for a number of years. Shortly before his death, Hofmeister served as a planning consultant on the Lincoln Center project.
Throughout the proceedings Rockefeller had intended to share costs with the Opera and to develop the site with buildings constructed by individual tenants. He never planned to carry the entire lease by himself, nor did he ever consider taking on full responsibility for its architectural development. But finding himself at an annual loss of more than $3,000,000 for the lease of the 12 acres, he boldly proceeded--in the teeth of the Depression--to develop the largest private enterprise ever undertaken in America.
Within one month of the Opera's withdrawal from Rockefeller Center negotiations were underway with the Radio Corporation of America (RCA). A suggestion from Raymond Hood brought the two concerns together. Having recently designed studios at 711 Fifth Avenue for the National Broadcasting Company (NBC), a subsidiary of RCA, Hood was intimately aware of the prodigious expansion of radio and emerging television technology. He correctly foresaw RCA's need for an enlarged center of operations. Architect Wallace Harrison followed up Hood's suggestion with a relative of the chairman of RCA's real estate committee. By February 1930, serious negotiations were underway with the Rockefeller developers. A contract was signed and announced to the press on June 4, 1930.[16]
In its early history the wireless was used almost exclusively for marine telegraphy, and was adopted in 1901 by the U.S. Navy as a substitute for homing pigeons. Its greater potential was not realized until April 12, 1912, when a young David Sarnoff, working in the British Marconi Company's New York branch above Wanamaker's Department Store, intercepted a Morse Code message: the Titanic was "sinking fast." Monitored for days as news-seeking crowds swelled the streets, the calamity served as a tremendous boost to both Marconi and Sarnoft. it also proved the reliability of the wireless and led to speculation about its potential to broadcast sound. Four years later and still employed by Marconi, Sarnoff suggested that radio be used to entertain the nation. Visionary at the time, his idea was not realized until the mid 1920s when post-war prosperity found a radio in nearly every American heme.
The enormous growth of the radio industry and its increasing importance in American culture had led the far sighted Owen D. Young, chairman of General Electric (one of RCA's corporate parents^, to inquire about the possibilities of consolidating RCA's operations in a complex at Rockefeller's development. Corporate reorganization four months later gave RCA independence under its new president David Sarnoff. In partial settlement RCA transferred to G.E. its new office building on 51st Street and Lexington Avenue (Cross & Cross, 1929-30).
The radio group then moved to Rockefeller's development, profoundly altering its character in the process. In replacing the Opera, RCA transformed the complex from an semi-cultural enterprise into a democratic focus for mass entertainment and the corporate headquarters for burgeoning technology. In the words of a contemporary, it substituted "a vision of the future [for] a vision of the past." The impact was such that for years the entire development was popularly, but inaccurately, called "Radio City." The name properly applies only to that part of Rockefeller Center which borders on Sixth Avenue, and which was dominated by RCA and its subsidiaries, the most notable being NBC, Radio-Keith-Orpheum ("RKO," a leading producer, distributor and exhibitor of motion pictures) and RCA Victor (one of the foremost manufacturers of phonographs and records in America). The Sixth Avenue position of the Radio Group was particularly appropriate as it complemented New York's theater district to its immediate southwest.
Although still somewhat speculative in its recent independence--and weathering the Depression with reduced profits --- RCA's new president David Sarnoff made an enormous §4.25 million annual rent commitment to Rockefeller Center. In return RCA was allowed to name the entertainment section of the development as well as its two theaters ("Radio City Music Hall" and the "RKO Roxy (later Center) Theater." It also won exclusive broadcasting rights among the many tenants in the complex and most importantly, the right to display the RCA logo atop its own skyscraper in the heart of the Center (on the site originally intended for the Opera) .
Nearly 300 men began excavation of the RCA Building in July 1931.[21 ] Steelwork commenced early the next year and the building was completed thirteen months later. Its architectural design was the result of several conditioning factors. On the most rudimentary level was the accommodation of varied tenant requirements and the maximum utilization of available land. The solution was the combination of three different buildings into a single structure (more than 1,000 feet long) which spans the full block between Rockefeller Plaza and Sixth Avenue. On the east, taking full advantage of light and air, are the 70-story corporate offices of RCA. Additional office space was provided along Sixth Avenue in the sixteen-story slab of the RCA Building West. The mid block section, much less desirable for office space, was allotted to NBC's broadcasting studios which needed no windows but only large amounts of layered horizontal space.
The technical specifications of this unit were particularly exacting. In order to insure soundproofing all the studios were designed with "floating" walls, floors and ceilings, suspended and insulated from the building's structural frame.
In keeping with his intention to build prime quality business space, developer John R. Todd insisted that no office be more than 27-1/2 feet from a window (the maximum at which natural light and air can be adequately provided). By contrast, many contemporaneous office structures were built to maximum girth leaving dark and unventilated spaces at their cores. The Associated Architects responded to Todd's requirement by grouping high speed elevators into central banks and surrounding them on each floor with a corridor and ring of offices of the required 27-1/2 foot depth. It totally outmoded the wedding cake arrangement where elevators were grouped on either side of a long central corridor, forced deep into the building by the zoning regulations which required towers (and therefore the elevators which serviced those towers) to be set back from the street.
The arrangement at RCA provided more than two million square feet of prime office space, distinguishing it for years as the world's largest office building infloor area.
The plan of the lobby and corridors reflect this scheme, as well, leading from the Rockefeller Plaza entrance, past shops which have both exterior and interior shopfronts, and into the elevator banks.
The Artwork and the Artists
A series of morals, part of Professor Hartley Burr Alexander's overall thematic program for Rockefeller Center, appears to have been part of the interior scheme from the beginning. As early as January 1932, contracts for morals in the RCA Building were rumored. Hood publicly revealed the project in a speech at the Architectural League in February. Despite pressures from groups of American artists, a decision was made to invite artists of international standing to decorate the interior of the RCA Building. On September 2, 1932, John Todd and Raymond Hood set sail for Europe:
The painting of ten panels each of which will be at least 17 by 20 feet will be discussed with the foreign artists, whose names were not disclosed. . . .All the decor-it ions. . < will fir. in the inclusive ornamental theme and will tell in the symbolic language of the arts a connected story.
After being turned down by Henri Matisse and not even making contact with Pablo Picasso, Hood and Todd met success with Jose Maria Sert, Diego Rivera, and Frank Brangwyn. Hood wrote to Rockefeller that Rivera's murals would face the main entrance, Sert's would be on the north wall, and Brangwyn's on the south.[28] The official press announcement described them:
Rivera's mural. . .will show "man at the crossroads looking with uncertainty but with hope and high vision to the choosing of a course leading to a new and better future." Sert's four panels will express man's new mastery over the material universe, through his power, will, imagination, and genius. Brangwyn's pieces will depict man's new relationship to society and his fellow-man his family, his relationships as a worker, as a part of government, and his ethical or religious relationships.
In addition to determining the themes of the murals, the architects had also decided on a color scheme: black, white, and gray on a light background.
Frank Brangwyn (1867-1956) was born in Bruges, Belgium, where his Welch father practiced as a church architect and supplier of ecclesiastical furnishings. His family returned to London in 1875 where the boy was befriended by architect A. H. Mackmurdo. Subsequently Brangwyn worked for two years in the office of William Morris (1882-84), helping to design seme of his wallpapers. He then worked independently and by the turn of the century had specialized in murals. Among his most celebrated works are his murals on the interior of the RCA Building at Rockefeller Center, those for the State Capitol at Jefferson City, Missouri, and the "People, Flora and Fauna of the British Empire" which covers 3000 square feet of the Civic Center in Swansea, Wales. A prolific and versatile artist, Brangwyn designed stained glass, furniture, and other applied arts as well as interiors and street pageants in addition to his work as a muralist, lithographer, etcher, and woodcutter.
Brangwyn established a considerable international reputation and is represented in collections from New York to Prague. He was knighted in 1941, followed eleven years later by the unprecedented honor of a retrospective exhibition in his own lifetime at the Royal Academy, of which Brangwyn had been a member since 1919.
Diego Rivera (1886-1957) was born in Mexico, attending the Acadernia de San Carlos in Mexico City. He studied and worked in Europe from 1907 to 1922, returning to Mexico in 1922 to become one of the founders of the Mexican mural movement. Between 1922 and 1930 he decorated the Anfiteatro Bolivar of the National Preparatory School, the Ministry of Education Building, both in Mexico City, the chapel of the National School of Agriculture at Chapingo, and began work in the Palacio de Cortes at Cuernavaca. Working in. the United States between 1930 and 1934, Rivera created murals for the California School of Fine Arts, the Detroit Institute of Arts, and the RCA Building, the latter—ultimately destroyed— the subject of tremendous controversy. Other notable Mexican work includes murals representing various aspects of Mexican history in the Palacio Nacional (1929-35, 1944-50).
José María Sert (1876-1945) was corn in Barcelona, Spain. Moving to Paris in his early twenties to study art, he spent most of his career there. He held his first American exhibition at the Wildensteiij-Galleries, New York, in the spring of 1924. Primarily known for his work as a muralist, Sert designed murals for the winter homes of Joshua S. Cosden, Edward T. Stotesbury, and Addison Mizner, adorned the north dining room of the Waldorf-Astoria Hotel with a series of murals depicting the marriage of Quiteria in Cervantes' Don Quixote, and decorated the council chambers in the league of Nations building in Geneva (1930). His murals for the RCA Building were carried out between 1933 and 1941, gaining a certain notoriety, because they, in part, replaced the destroyed Diego Rivera mural.
While the choice of foreign artists was controversial, even further controversy was to follow. The artists began working en the murals in late 1932. Rivera objected to the color scheme and the requirement to paint on canvas, and through the intervention of Nelson Rockefeller, John D. Rockefeller, Jr.'s sen, was allowed to paint on the plaster in tempera and to use color. Rivera began work in March 1933; his assistants had previously prepared the wall and paint and were transferring his sketches to the plaster. As the painting took form, its socialist inclinations became obvious. Prominently displayed in the composition were a head of Lenin and workers parading with red flags. Nelson Rockefeller requested the substitution of another face. Rivera suggested a partial change in composition, one which would leave Lenin in place but balanced by an American historical leader; failing that, he wrote "rather than mutilate the conception I should prefer the physical destruction of the conception in its entirety."
On May 9, the Center ordered Rivera to stop work and covered the fresco with canvas. Rivera was paid in full, and on February 9, 1934, the fresco was destroyed and removed, not to be replaced until 1937, by another Sert work.
Sert's initial work for the RCA Building was installed along the north corridor in May 1933. Painted in his Paris studio on canvas, each panel is 25 feet wide by 17 feet high and depicts one aspect of "man's new mastery of the problems of modem civilization." Unlike Rivera, Sert had no intention of making a political statement. He considered mural painting "the complement of architecture. . . .On those walls the moralist puts what is called for. Nothing more, nothing less. . . .Mural painting is an extension of a building's function. It is a part of building, and no muralist must ever forget that."
Brangwyn's work for the south corridor did not arrive until December 1933. Like Sert's work, these are four panels, 25 feet by 17 feet. Brangwyn had no problems with the theme—man's relationship to society—but chose in the final panel to depict the Sermon on the Mount. Doubts were raised by Rockefeller Center officials, perhaps made sensitive by the Lenin controversy, about the depiction of the figure of Christ, suggesting that a light shining down from heaven might suffice. Brangwyn objected, and finally the problem was solved by showing Christ as a hooded figure, his back turned to the spectator, standing against a background of lighted clouds.
Sert's 1937 mural on the west wall of the entrance lobby replaced the disgraced Rivera work, after negotiations with Picasso to fill the space col lapsed. Titled "American Progress, the Triumph of Man's Accomplishments Through Physical and Mental Labor," it completed "the pictorial epic of humanity's struggle begun in the other murals"
Another Sert mural was installed in March 1941 on the ceiling above the Rockefeller Plaza entrance. Entitled "Time" it was put in place after the lobby lighting system was modified to allow for its illumination. Other Sert murals may be seen on the north and south walls of the first elevator bank, representing the spirit of dance and man's triumph in communication, on the north and south stairways to the mezzanine (these are titled "Contest-1940" and "Fraternity of Men") and on the north and south balustrades, representing "Fire" and "Light." These were installed in 1937.
Conception and Design
The design of the lobby of the RCA Building is a continuation of the exterior building design, with its emphasis on form and axis, as well as a major mural program which extends the overall art scheme of Rockefeller Center.
Lobbies of office buildings of this period generally combined two functions: a grand entrance and public space, and a passageway to the elevator system. The Chrysler Building's lobby (1928-30) is a prime example: a highly ornamental triangular-shaped lobby, whose vertex is the entrance and whose base is a wall opening with two sets of elevator banks. The Empire State Building (1930-31) because of its size and layout required a separation of the two functions, with a chapel-like grand entrance space, and a series of corridors leading to the elevators. The RCA Building lobby employs a similar scheme. /
The layout of the lobby floor was in large part dictated by that of the general office floor plans. Because of Todd's requirement that no office be more than 27-1/2 feet from a window, the elevators were placed in central banks and then surrounded with corridors and offices. In the lobby the central core of elevators is flanked by circulation corridors and then by shops opening onto the corridors. Access, too, had to be provided to the NBC Studios in the mid-section of the building. This is accomplished by means of a separate lobby with its own elevator bank. In addition, easy access was required to the underground concourse and the balconies at mezzanine level. Staircases flanking the entrance lobby and within the central core serve this purpose. The manifestation of the long corridors and elevator banks is that of a large public concourse.
An effect of grandeur was sought in the entrance lobby, but because of the service core this occupies a relatively confined area. The architects chose to maximize the effect by creating a double-height space which opens from the Rockefeller Plaza entrance and continues into the corridors through means of mezzanine balconies. These, in turn, allow access to second floor office space. The character of the double-height space is further enhanced by the mural program. The use of rich, elegant materials, such as veined marbles and bronze, and the attention to detail are characteristic of the quality displayed throughout the construction of Rockefeller Center. The details themselves, from shopfronts to indicator signs, from ventilation grilles to elevator doors, are modernistic in design, in keeping with the overall design of the Center.
Description
The interior of the RCA Building consists of two sections: the entrance lobby off Rockefeller Plaza, and the connecting corridors and elevator banks which , with the inner store windows and entrances, create the effect of a grand concourse.
The entrance lobby, opening off Rockefeller Plaza, is a relatively restricted space. On the eastern wall is a the major entrance, and at the west is the information desk, behind which rises Sert's mural of "American Progress." The lower portion of the entrance wall contains six sets of revolving doors and two sets of double-leaf doors of bronze and glass set within a paneled bronze screen which projects slightly into the space. Rising above the doorways is a large screen of cast glass designed by Lee Lawrie- Fifty-five feet long and fifteen feet high, it is molded in high relief and constructed of uniform blocks, 19 by 29 by 3 inches, bonded by vinelite. Flanking the entrance are stairways leading up to the mezzanine and staircases and escalators leading down to the underground concourse. The information desk opposite the doorway is of Champlain gray marble, which is almost black in color, adorned with incised moldings at top and bottom.
Four large piers, faced with reeded ivory marble terminating in a bronze molding, channel traffic through the space. Light fixtures are incorporated into the piers so as to illuminate Sert's mural of '*Time," which spreads out over the entire entrance lobby ceiling. Three figures, representing Past, Present, and Future, are shewn with their feet resting on the tops of the piers. Hour glasses, held by the figures of Past and Future, are being placed on the scales held by the figure of Present. The airplanes in flight are to indicate iron's partial conquest of time and space.
Sert's mural "American Progress" on the wall behind the information desk (which is also the eastern wall of the easternmost elevator bank) depicts America's development through the union of intelligence and strength. On the right are figures of Poetry, Music, and Dance looking upward for inspiration; on the left are men of action, represented by statues of labor. These two groups flank pictures of Ralph Waldo Oner son, the philosopher and thinker, and Abraham Lincoln, as the man of action. In the center background are the towers of Rockefeller Center. This device of depicting the building in lobby art was a favorite with designers of the period, being used in both the Chrysler Building and the Empire State Building.
The lobby opens into corridors flanking the elevator banks, and for the extent of the first five elevator banks and the elevator hallways, this is a double-height space dominated by rows of piers, carrying on the east-west axis, faced with the same ivory marble as that used on the piers in the entrance lobby. The walls are faced with Champlain marble up to the height of the shopfronts and elevator doors, terminating in bronze moldings. Beveled bronze service doors may be seen on the outer walls opposite the piers. Above the marble is a beige plaster surface on the outer vails, while the inner elevator bank walls are adorned with morals which wrap around the corners onto the elevator hallway walls.
The work of Sert is represented by figures hoisting a globe up over scaffolding depicting man's triumph in communications—radio, telephone, and telegraph— on the south wall of the first elevator bank, and figures representing the spirit of the dance on the north wall of the first elevator bank. Sert's first four murals for the RCA Building may be seen on the next four elevator banks facing the north corridor.
In order they are: "The abolition of pain and labor of former ages by the creative intelligence of the machine,'' with human figures and oxen pulling a heavy load with a railroad engine in the background; "The conquests of the pests and epidemics of yesteryear by scientific invention,'' with figures lined. ' up waiting to received inoculations; "The stamping out of tyranny and slavery," with figures of slaves pushing enormous blocks of stone; and "The suppression of war through the combined faculties of man applied to the quest of human happiness," dominated by figures grouped around and emerging from giant cannons.
The four elevator banks on the south corridor display Frank Brangwyn's murals and are meant to be seen in sequence running west to east: "Man laboring painfully with his own hands; living precariously and adventurously with courage, fortitude, and the indomitable will to survive," depicting figures in the wilderness; "Man the creator and master of the tool. Strengthening the foundations and multiplying the comforts of his abiding place," with figures in an arbor cultivating vines; "Man the master and servant of the machine, harnessing to his will the forces of the material world, mechanizing labor and adding these to the promise of leisure," with figures working at a forge; and "Man's ultimate destiny depends not on whether he can learn new lessons or make new discoveries and conquest, but on his acceptance of the lesson taught him close upon two thousand years ago," with figures listening to Christ preaching the Sermon on the Mount.
On the outer walls are a series of shopfronts with doors and windows framed in bronze. In the elevator hallways, the elevator doors are of beveled bronze and are set in bronze reveals. Ventilator grilles, directory boards, indicator signs, elevator indicator signs, and elevator indicator lights in this section are framed in bronze, employing curved, streamlined motifs.
The outer walls rise to mezzanine balconies with hand seme streamlined bronze railings on both the north and south. The stairways leading to the mezzanine flanking the entrance have Champlain marble wainscoting and bronze railings. Adorning the staircases are additional Sert murals: "Contest-1940" with figures of the five races of mankind using the world as a football to compete for global supremacy, at the north, and "Fraternity of Men" with the figures of the five races clasping their hands in brotherhood, at the south. Terminating the double-height corridors, the balconies extend across the ground floor corridors at mezzanine level, and the balcony fronts display Sert murals: "Fire" representing the sun at the north? and "Light" depicting the supreme ruler of the world at the south. Throughout the murals adopt a monochromatic color scheme of beige, gray, and black which harmonizes with the other interior finishes.
At the mezzanine level the inside of the balcony is faced with Champlain marble. The outer walls are ivory marble above a Champlain marble wainscoting terminating in a bronze molding at the height of the doorways. The walls above are plain beige plaster, as are the ceilings.
Offices with bronze doors and bronze window surrounds open onto the balconies. The mezzanine continues as corridors westward beyond the balconies; both inner and outer walls have finishes similar to the outer walls of the balconies, and the office door and window configurations and finishes as they open onto the corridors are also similar. In the area adjacent to the western elevator bank are four piers, faced in ivory marble above a Champlain marble base and terminating in bronze molding strips-The floors throughout the mezzanine are of black terrazzo executed in rectangular patterns outlined with bronze strips.
At ground floor level, the corridors continue westward along the east-west axis beyond the fifth elevator bank. The ceiling level drops and this difference in height is marked by a change in materials. The corridor walls are faced in Champlain marble terminating in bronze moldings, and piers, continuing in the line of those in the double-height corridors, are also faced in Champlain marble terminating in bronze molding strips. Bronze waste receptacles are placed at the bases of several. The ceilings are white plaster. The treatment of the shopfronts on the outer walls is like that of the shopfronts in the double-height corridors. The floor surface is uniform throughout the ground floor, with black terrazzo set in panels with a green-gray center section, outlined with bronze strips.
Hallways extend from the corridors leading to the entrances from 49th Street and 50th Street. Each has two sets of revolving doors, framed in bronze. Bronze letters with the street names are placed above the doors. The walls continue the Champlain marble facing and bronze moldings of the corridor walls and are accented by bronze ventilation grilles, taking streamlined forms, display windows framed in bronze, and beveled bronze service doors. Directory boards and indicator signs throughout the corridors and hallways are outlined with bronze in streamlined motifs.
West of the elevator banks is a stairway leading down to the underground concourse; this is lined with Champlain marble and has bronze moldings, and handsome bronze railings. Similarly a stairway lined with Champlain marble and ivory marble in the same location leads up to the mezzanine. An enclosed stairway leads up to the mezzanine at the juncture of the RCA Building with the RCA Building West, while an open stairway leads down to the underground concourse. Both stairways are lined with Champlain marble and have bronze railings and bronze moldings.
The NBC lobby is faced with Champlain marble terminating in bronze moldings in the deep reveals opening from the corridors, and light green marble on the walls, terminating in nickel bronze moldings.
- From the 1985 NYCLPC Landmark Designation Report
Midtown Manhattan, New York City, New York, United States
The ground floor and mezzanine floor interior of the RCA Building, built in 1931-33, is one of the major components of What is the largest and most important buildings constructed at Rockefeller Center. As the RCA Building in its form and siting is the focus of the major east-west axis running through the Center from Fifth to Sixth Avenues, so is its ground floor and mezzanine floor interior an important continuation of that axis. The double-height entrance lobby symbolically welcomes visitors, drawing them from the Rockefeller Plaza entrance, past the information desk, into corridors flanked by shops, which create the sense of a grand concourse, and leading to six elevator banks with high-speed elevators which efficiently carry tenants and visitors up into the 70-story building. The experience of the visitor to the ground floor and mezzanine floor interior is enhanced by the extensive program of murals, executed by Jose Maria Sert and Frank Brangwyn, which were conceived as an intrinsic part of the building and a continuation of the overall art scheme used on the exteriors of the Rockefeller Center buildings.
The RCA Building and Rockefeller Center
Rockefeller Center is one of the most important architectural projects ever undertaken in America. It was unprecedented in scope, near visionary in its urban planning and unequalled for its harmonious integration of architecture, art and landscaping. The complex grew out of an ill-fated plan to build new midtown quarters for the Metropolitan Opera Company. When the original scheme collapsed, the project was transformed into the private commercial enterprise of John D. Rockefeller, Jr. Construction of the original complex began in 1931 and ended with the completion of the fourteenth building in 1939.
John D. Rockefeller, Jr. (1874-1960) was born in Cleveland, Ohio. After graduating from Brown University in 1897 he joined his father's office and for some years held directorships of such businesses as the Standard Oil Company of New Jersey, United States Steel Corporation and Missouri Pacific Railroad among others. By about 1911, however, Rockefeller had become almost totally involved with philanthropic, civic, educational and religious enterprises such as the Rockefeller Institute for Medical Research, the Rockefeller Foundation, Rockefeller Sanitary Commission and International Education Board to name a few only. A devout Baptist, he also founded the Institute for Social and Religious Research and funded construction of Riverside Church (1927-30). The latter was just one of the many architectural undertakings which Rockefeller sponsored.
He also funded the restoration of the palaces at Fontainebleau and Versailles and Reims Cathedral in France, the Agora and Stoa of Attolos in Athens, and in America, Washington Irving's "Sunnyside" heme, Colonial Williamsburg and the birthplace of George Washington. He also supplied the land for the Museum of Modem Art, for the Rockefeller Institute and Fort Tryon where he built the Cloisters. later, in 1946, Rockefeller donated land for the construction of the United Nations along the East River and gave generously to Lincoln Center for the Performing Arts. Although never an opera devotee, he supported the Metropolitan Opera project as just one more worthy civic and cultural cause.
Rockefeller's involvement in the project to relocate the Metropolitan Opera began on May 21, 1928, when Benjamin Morris presented the scheme to potential investors during a dinner at the Metropolitan Club. Among the guests was Ivy Lee, Rockefeller's public relations manager. He recommended the proposal to his employer, noting that it would "make the [Opera] Square and the immediate surroundings the most valuable shopping district in the world." Rockefeller was interested. He, his sister and father lived in three large houses on W. 53rd and 54th Streets (just three blocks north of the proposed Opera site) and owned a good deal of real estate in the area. Development of a cultural center would insure the quality of his neighborhood while increasing the value of his speculative properties. But before making any commitment, Rockefeller sought development advice from prominent real estate advisors, the Todd, Robertson & Todd Engineering Corp. among them.
John Reynard Todd (1867-1945) was a lawyer who, in partnership with Henry Clay Irons, became accidentally involved in construction and rentals. Todd & Irons developed their building activities into a lucrative business through which they erected and sold at large profits numerous hotels, apartments and commercial structures. Among them was the Cunard Building whose lobby was designed by Benjamin Morris and which stood directly across the street from Rockefeller's Standard Oil Building at 26 Broadway. When Irons retired in 1919 Todd went into partnership with his physician brother, Dr. James M. Todd (c. 1870-1939), and Hugh S. Robertson (1880-1951), a specialist in real estate and financial management. Together they were responsible for the internal planning, construction and rental of the Ritz and Barclay Hotels, Postum Building and the fabulously successful Graybar Building which they linked to Grand Central Terminal with corridors.
John R. Todd was the personal friend of Thomas M. Debevoise and Charles O. Heydt, Rockefeller's legal and real estate advisors and it was due to them that he became involved in the Opera project. It was through Debevoise that Todd's son Webster (in the engineering firm of Todd & [Joseph O.] Brown) was engaged in Rockefeller's restoration of Colonial Williamsburg in 1928. And through Heydt that Todd, his brother and Robertson were hired to develop Rockefeller's midtown complex. Heydt informed Rockefeller that Todd had been involved "in very large enterprises, [had] architects in his own office, and--[had] never made a failure. He [understood] thoroughly the matter of financing the construction of large buildings...and would be in a position to help prospective tenants...construct their own buildings." Todd, he said, was "a hard-headed business man."Todd, Robertson & Todd was one of five real estate firms to advise Rockefeller on the development potential of the Opera project in autumn, 1928.
In addition to the Opera and its plaza (to be designed by Benjamin Morris), the firm recommended a remarkably progressive mixed use complex including hotels, apartment and office buildings, a shopping arcade and department store (the latter in continuation of the development of Fifth Avenue with such fashionable counterparts as Saks and Altmans). The plan also included two new private streets and a lower level for vehicular traffic, parking and freight deliveries. The scheme was prepared over Labor Day weekend, 1928 by two little known, 38 year old architects on Todd's staff: L. Andrew Reinhard and Hairy Hofmeister.
Under Todd's directive, Reinhard & Hofmeister prepared an improved plan in mid-September, 1928. Two weeks later (October 1, 1928) Rockefeller made a commitment to lease from Columbia College the three blocks between 48th-51st Streets. The land stretched west from Fifth Avenue but stopped short of Sixth Avenue where street frontage was privately owned. (In subsequent years Rockefeller acquired the western lots as well). The Columbia contract was not actually signed until December 31, 1928, at which point Rockefeller agreed to pay approximately $3.5 million annual rent during 1928-1952 with options for three 21-year renewals.
On October 1, 1929 (precisely a year after Rockefeller agreed to lease the Columbia property) Todd, Robertson & Todd were appointed managers of the project. Their mandate was to "build the thing, put it on a profitable basis, and sell it to the world." By the end of October their staff architects (Reinhard & Hofmeister) were named architects of the development. They were experienced in the internal layouts preferred by Todd and familiar with his theory that "business property income production supercedes pure aesthetics." Todd recommended at the same time that Harvey Corbett and Benjamin Morris be engaged as consulting architects (although the latter declined after December, 1929). He also suggested employment of Raymond Hood, the man of ideas whose reputation as a leading skyscraper designer had skyrocketed in recent years.
Todd selected architects "who would be primarily interested in good planning, utility, cost, income, low operating expenses and progress...[men who were not too] committed to the architectural past [nor] too much interested in wild modemism."[6] The pooling of eight different talents from three different firms allowed for a division of labor and for an undertaking too large for most private offices of the day. Architecture by committee modified the singular dominance of any one personality, but also seems to have generated competition and controversy. The situation was resolved in February 1930, when the architects united in a collective known as the Associated Architects. Thereafter all drawings bear the three firm names in strict alphabetical order: Corbett, Harrison & MacMurray; Hood, Godley (until 1931) & Fouilhoux; Reinhard & Hofineister.
The Associated Architects
Corbett, Harrison & MacMurray
Harvey Wiley Corbett (1873-1954) was born to physician parents in San Francisco, California. He was educated at the University of California (1895), the Ecole des Beaux Arts in Paris (1906) and the atelier of the historistic Jean Louis Pascal. Between 1903 and 1912 he was in partnership with F. Livingston Pell and between 1912 and 1928 with Frank J. Helmle. While a lecturer at the School of Architecture of Columbia University (1907-11, 1920-35), Corbett trained many students in the "Atelier Colurttoia," which was modeled after the system of the Ecole des Beaux Arts. One of Corbett's major works was the Bush Terminal Building on W. 42nd Street (1923) which established his reputation as a practitioner of "modern" architecture. Its success led Irwin Bush to commission from Corbett designs for the $10,000,000 Bush House in London. Dedicated to "the friendship to English speaking peoples," this American-English center was to find its counterpart in the British Empire Building at Rockefeller Center.
Corbett was an early and strong advocate of the skyscraper as an urban building form and wrote and lectured extensively in support of this concept. He was a practical architect who envisioned the future city with super-block skyscrapers, tiered streets and multi-level transportation systems. Corbett had a reputation as a skilled planner who worked within budget while remaining aware of the city scape and urban design. He acted as a consultant to the Regional Plan Association and served on the architectural planning committees for the 1933 Chicago Century of Progress Exposition (beginning in 1929) and the 1939 New York World's Fair.
Corbett was a fellow of both the American Institute of Architects and the Royal Institute of British Architects and received honorary degrees from the University of California, the University of Liverpool and Columbia University. He was a member of the Fine Arts Commission of the State of New York and served as president of the Architectural League of New York and the National Arts Society.
Corbett submitted his "Symposium" design after the retirement of Frank Helmle in 1928 and his establishment of a new partnership with William MacMurray and Wallace Harrison. Together they designed the Roerich Museum and Master Apartments on Riverside Drive in New York and the Horace Bushnell Memorial Hall in Hartford, Connecticut. Because of the latter experience in theater design and because of Corbett*s formidable reputation, the Rockefeller developers were anxious to secure the firm's expertise.
William H. MacMurray (1868-1941) became associated with Corbett same time before 1927. His prime concern was the partnership's business affairs. He had little to do with the design of the Rockefeller Center project. Wallace K. Harrison (1895-1982), by contrast, was very much involved in matters of design and after the death of Raymond Hood in 1934 he exerted an increasingly strong influence on Rockefeller Center's architectural form. He was also responsible for one of the Center's new buildings on the west side of Sixth Avenue.
Harrison was born to a foundry superintendent in Worcester, Massachusetts. He quit school at 14 to take a $5.00/wk job as an office boy with the contracting firm of O.W. Norcross, simultaneously attending Worcester Polytechnic Institute. In 1915 he became a draftsman in the New York office of McKim, Mead & White and attended evening classes at the atelier of Harvey Corbett. In 1917 Harrison enrolled in the Ecole des Beaux Arts. He then returned briefly to McKim, Mead & White before winning a Rotch Traveling Scholarship and a year at the American Academy in Rome. Upon his return to New York in 1922 Harrison became a draftsman for Bertram Goodhue who was then engaged on the Nebraska State Capitol. In 1926 Harrison married Ellen Milton whose brother was the son-in-law of John D. Rockefeller, Jr. and in the following year, joined in partnership with Corbett, Helmle (soon to retire) and MacMurray.
In 1935 Harrison left Corbett's office and formed a partnership with J. Andre Fouilhoux who had worked with Raymond Hood until the latter's death in 1934. Six years later Max Abramowitz (1908-1959) was taken on as a partner. When Fouilhoux died in 1945 the firm survived as Harrison & Abramowitz and went on to become one of the most successful postwar architectural concerns in America. Included among its works are parts of Lincoln Center for the Performing Arts, Nelson Rockefeller's Empire State Plaza in Albany and the United Nations (for which Rockefeller donated the land in 1946). In 1967 Harrison was awarded the gold medal of the American Institute of Architects for his "demonstrated ability to lead a team in producing significant architectural works of high quality over a period of more than 30 years." Hood, Godley & Fouilhoux.
Raymond Mathewson Hood (1881-1934) was born in Pawtucket, Rhode Island. He studied at Brown University before transferring to the Massachusetts Institute of Technology in 1900 and later, the Ecole des Beaux Arts in Paris (1905, 1908-10). As a draftsman he was employed in the offices of Cram, Goodhue & Ferguson, Boston; Palmer, Hornbostel & Jones, New York; and Henry Hornbostel, Pittsburgh. He set up his own office in New York in 1914, but did not achieve any great architectural success until 1922. In that year John Mead Howell asked Hood to join him in submitting a design for the Chicago Tribune competition. Their winning scheme was a soaring tower terminating in setback peaks and flying buttresses of neo-Gothic design, distinguished by its logical plan and clarity of design.
The competition established Hood's reputation as a skyscraper designer and brought his firm several notable commissions: the American Radiator Building, Daily News Building and the McGraw Hill Building, all in New York City, and all in the years immediately preceding Rockefeller's development. Hood was also associated with Harvey Corbett on plans for the Chicago Century of Progress Exposition of 1933.[10] His good working relationship with Corbett, together with Hood's originality and the publicity generated by his previous skyscraper designs, were positive factors in his selection for the new complex. Before his premature death in 1934, Hood played a dominant role in the design of Rockefeller Center. He was responsible for the introduction of building setbacks and rooftop gardens, the establishment of uniformly low-rise elevations along Fifth Avenue and significantly, the suggestion to bring the radio industry to the Center.
Hood was a fellow of the American Institute of Architects, a president of the Architectural League of New York, and a trustee of the Beaux Arts Institute of Design. He received the Medal of Honor of the Architectural League in 1926, and in 1940 was posthumously awarded a gold medal from the New York Chapter of the AIA.
Hood brought to the Center Godley and Fouilhoux, his partners since the mid 1920s. Frederick A. Godley (1887-1961) received his B.A. from Yale University (1908), an M.A. from the Massachusetts Institute of Technology (1910) and a diploma of architecture from the Ecole des Beaux Arts (1913). After working in the Boston architectural office of Guy Lowell, he established his own firm in 1915 (Godley & Haskell, 1913-18; Godley & Sedgwick, 1918-24). In 1924 he joined Raymond Hood in the firm of Hood, Godley & Fouilhoux, specializing in the business affairs of the office. He left the firm in 1931, while the Rockefeller Center project was underway, to join the faculty of the Yale University School of Architecture, where he taught until 1947. Godley was also a fellow of the American Institute of Architects and chairman of the educational committee of the Beaux Arts Institute of Design.
Jacques Andre Fouilhoux (1879-1945), a Paris-born engineer, received his training at the Ecole Centrale des Arts et Manufactures. Emigrating to the United States in 1904, he established the firm of Fouilhoux & Whiteside in Port 1 and, Oregon in 1908. He later worked for Albert Kahn, noted industrial architect, in Detroit, among others. After World War I Fouilhoux moved to New York where he formed a partnership with Raymond Hood in 1927. Following Hood's death, Fouilhoux became partners with Wallace K. Harrison (formerly of Corbett, Harrison & MacMurray) and together they continued to be involved with Rockefeller Center. With their new partner Max Abramowitz they designed the Rockefeller Apartments, general plans, major buildings, Trylon and Perisphere for the New York World's Fair of 1939. In collaboration with others Fouilhoux designed the Fort Greene and Clinton Hill housing projects in Brooklyn.
He fell to his death from one of their roofs in 1945. Fouilhoux was a fellow of the American Institute of Arch tects and served as treasurer of the Beaux-Arts Institute of Design. Reinhard Hofmeister I. Andrew Reinhard (1891-1964) was the son of a carpenter-cabinet maker who, at age 14, became an office boy for Benjamin Morris (the architect initially commissioned to design the new Opera). Reinhard then studied at the Mechanics Institute in New York and finished his formal education at the Beaux-Arts Society of Design. He then returned to Morris' firm as a junior designer and worked in other prominent offices, notably that of Raymond Hood (who would later make some of the greatest contributions to Rockefeller Center). Reinhard then spent eight years with Todd, Robertson & Todd during which time he and Hofmeister worked en rentals and interior layouts for the Graybar Building. In 1928 Reinhard & Hofmeister formed a partnership.
Henry Hofmeister (1891-1962) was a self-trained architect who, after only two years of high school, joined the firm of Warren & Wetmore. He worked there for 17 years before joining Todd, Robertson & Todd. Hofmeister acquired a reputation for being methodical and having a good knowledge of such practical matters as plumbing, ventilation and efficient interior layouts. He organized the Rockefeller Center architectural office and supervised the preparation of the necessary architectural drawings. He was, according to Reinhard, "the man who got the work out." Following the completion of Rockefeller Center, the partners received gold medals for their work from the Architectural league of New York and the Fifth Avenue Association.
Other works later executed by Reinhard & Hofmeister include the World's Fair Hall of Music of 1939 (which has many spatial similarities to Radio City Music Hall); the Federal Building at John F. Kennedy International Airport; the Chrysler Building East; buildings for the New York Medical College; Chase Manhattan Bank; the Italian, Swedish and Waterman steamship lines? the Dun and Bradstreet home office building in New York; the surgical building and research center of the New England Medical Center in Boston? the Deeds Carillon Tower in Dayton, Ohio; and the World War II American cemetery chapel at Neuville en Condroz in Belgium. In 1947 the firm expanded as Reinhard, Hoftneister & Walquist, but dissolved upon Reinhard's retirement in 1956.
Reinhard was a member of the National Commission of Fine Arts in Washington in 1945-50, a fellow of the American Institute of Architects, and served as an officer of the New York Chapter of the AIA, the Architectural league and Municipal Art Society. Hofmeister served as a consultant during World War II to Nelson Rockefeller, then coordinator of Inter--American Affairs with the state Department- He was a member of the American Institute of Architects, the New York Building Congress and the Architectural league of New York, directing the League's program for aiding unemployed or needy architects for a number of years. Shortly before his death, Hofmeister served as a planning consultant on the Lincoln Center project.
Throughout the proceedings Rockefeller had intended to share costs with the Opera and to develop the site with buildings constructed by individual tenants. He never planned to carry the entire lease by himself, nor did he ever consider taking on full responsibility for its architectural development. But finding himself at an annual loss of more than $3,000,000 for the lease of the 12 acres, he boldly proceeded--in the teeth of the Depression--to develop the largest private enterprise ever undertaken in America.
Within one month of the Opera's withdrawal from Rockefeller Center negotiations were underway with the Radio Corporation of America (RCA). A suggestion from Raymond Hood brought the two concerns together. Having recently designed studios at 711 Fifth Avenue for the National Broadcasting Company (NBC), a subsidiary of RCA, Hood was intimately aware of the prodigious expansion of radio and emerging television technology. He correctly foresaw RCA's need for an enlarged center of operations. Architect Wallace Harrison followed up Hood's suggestion with a relative of the chairman of RCA's real estate committee. By February 1930, serious negotiations were underway with the Rockefeller developers. A contract was signed and announced to the press on June 4, 1930.[16]
In its early history the wireless was used almost exclusively for marine telegraphy, and was adopted in 1901 by the U.S. Navy as a substitute for homing pigeons. Its greater potential was not realized until April 12, 1912, when a young David Sarnoff, working in the British Marconi Company's New York branch above Wanamaker's Department Store, intercepted a Morse Code message: the Titanic was "sinking fast." Monitored for days as news-seeking crowds swelled the streets, the calamity served as a tremendous boost to both Marconi and Sarnoft. it also proved the reliability of the wireless and led to speculation about its potential to broadcast sound. Four years later and still employed by Marconi, Sarnoff suggested that radio be used to entertain the nation. Visionary at the time, his idea was not realized until the mid 1920s when post-war prosperity found a radio in nearly every American heme.
The enormous growth of the radio industry and its increasing importance in American culture had led the far sighted Owen D. Young, chairman of General Electric (one of RCA's corporate parents^, to inquire about the possibilities of consolidating RCA's operations in a complex at Rockefeller's development. Corporate reorganization four months later gave RCA independence under its new president David Sarnoff. In partial settlement RCA transferred to G.E. its new office building on 51st Street and Lexington Avenue (Cross & Cross, 1929-30).
The radio group then moved to Rockefeller's development, profoundly altering its character in the process. In replacing the Opera, RCA transformed the complex from an semi-cultural enterprise into a democratic focus for mass entertainment and the corporate headquarters for burgeoning technology. In the words of a contemporary, it substituted "a vision of the future [for] a vision of the past." The impact was such that for years the entire development was popularly, but inaccurately, called "Radio City." The name properly applies only to that part of Rockefeller Center which borders on Sixth Avenue, and which was dominated by RCA and its subsidiaries, the most notable being NBC, Radio-Keith-Orpheum ("RKO," a leading producer, distributor and exhibitor of motion pictures) and RCA Victor (one of the foremost manufacturers of phonographs and records in America). The Sixth Avenue position of the Radio Group was particularly appropriate as it complemented New York's theater district to its immediate southwest.
Although still somewhat speculative in its recent independence--and weathering the Depression with reduced profits --- RCA's new president David Sarnoff made an enormous §4.25 million annual rent commitment to Rockefeller Center. In return RCA was allowed to name the entertainment section of the development as well as its two theaters ("Radio City Music Hall" and the "RKO Roxy (later Center) Theater." It also won exclusive broadcasting rights among the many tenants in the complex and most importantly, the right to display the RCA logo atop its own skyscraper in the heart of the Center (on the site originally intended for the Opera) .
Nearly 300 men began excavation of the RCA Building in July 1931.[21 ] Steelwork commenced early the next year and the building was completed thirteen months later. Its architectural design was the result of several conditioning factors. On the most rudimentary level was the accommodation of varied tenant requirements and the maximum utilization of available land. The solution was the combination of three different buildings into a single structure (more than 1,000 feet long) which spans the full block between Rockefeller Plaza and Sixth Avenue. On the east, taking full advantage of light and air, are the 70-story corporate offices of RCA. Additional office space was provided along Sixth Avenue in the sixteen-story slab of the RCA Building West. The mid block section, much less desirable for office space, was allotted to NBC's broadcasting studios which needed no windows but only large amounts of layered horizontal space.
The technical specifications of this unit were particularly exacting. In order to insure soundproofing all the studios were designed with "floating" walls, floors and ceilings, suspended and insulated from the building's structural frame.
In keeping with his intention to build prime quality business space, developer John R. Todd insisted that no office be more than 27-1/2 feet from a window (the maximum at which natural light and air can be adequately provided). By contrast, many contemporaneous office structures were built to maximum girth leaving dark and unventilated spaces at their cores. The Associated Architects responded to Todd's requirement by grouping high speed elevators into central banks and surrounding them on each floor with a corridor and ring of offices of the required 27-1/2 foot depth. It totally outmoded the wedding cake arrangement where elevators were grouped on either side of a long central corridor, forced deep into the building by the zoning regulations which required towers (and therefore the elevators which serviced those towers) to be set back from the street.
The arrangement at RCA provided more than two million square feet of prime office space, distinguishing it for years as the world's largest office building infloor area.
The plan of the lobby and corridors reflect this scheme, as well, leading from the Rockefeller Plaza entrance, past shops which have both exterior and interior shopfronts, and into the elevator banks.
The Artwork and the Artists
A series of morals, part of Professor Hartley Burr Alexander's overall thematic program for Rockefeller Center, appears to have been part of the interior scheme from the beginning. As early as January 1932, contracts for morals in the RCA Building were rumored. Hood publicly revealed the project in a speech at the Architectural League in February. Despite pressures from groups of American artists, a decision was made to invite artists of international standing to decorate the interior of the RCA Building. On September 2, 1932, John Todd and Raymond Hood set sail for Europe:
The painting of ten panels each of which will be at least 17 by 20 feet will be discussed with the foreign artists, whose names were not disclosed. . . .All the decor-it ions. . < will fir. in the inclusive ornamental theme and will tell in the symbolic language of the arts a connected story.
After being turned down by Henri Matisse and not even making contact with Pablo Picasso, Hood and Todd met success with Jose Maria Sert, Diego Rivera, and Frank Brangwyn. Hood wrote to Rockefeller that Rivera's murals would face the main entrance, Sert's would be on the north wall, and Brangwyn's on the south.[28] The official press announcement described them:
Rivera's mural. . .will show "man at the crossroads looking with uncertainty but with hope and high vision to the choosing of a course leading to a new and better future." Sert's four panels will express man's new mastery over the material universe, through his power, will, imagination, and genius. Brangwyn's pieces will depict man's new relationship to society and his fellow-man his family, his relationships as a worker, as a part of government, and his ethical or religious relationships.
In addition to determining the themes of the murals, the architects had also decided on a color scheme: black, white, and gray on a light background.
Frank Brangwyn (1867-1956) was born in Bruges, Belgium, where his Welch father practiced as a church architect and supplier of ecclesiastical furnishings. His family returned to London in 1875 where the boy was befriended by architect A. H. Mackmurdo. Subsequently Brangwyn worked for two years in the office of William Morris (1882-84), helping to design seme of his wallpapers. He then worked independently and by the turn of the century had specialized in murals. Among his most celebrated works are his murals on the interior of the RCA Building at Rockefeller Center, those for the State Capitol at Jefferson City, Missouri, and the "People, Flora and Fauna of the British Empire" which covers 3000 square feet of the Civic Center in Swansea, Wales. A prolific and versatile artist, Brangwyn designed stained glass, furniture, and other applied arts as well as interiors and street pageants in addition to his work as a muralist, lithographer, etcher, and woodcutter.
Brangwyn established a considerable international reputation and is represented in collections from New York to Prague. He was knighted in 1941, followed eleven years later by the unprecedented honor of a retrospective exhibition in his own lifetime at the Royal Academy, of which Brangwyn had been a member since 1919.
Diego Rivera (1886-1957) was born in Mexico, attending the Acadernia de San Carlos in Mexico City. He studied and worked in Europe from 1907 to 1922, returning to Mexico in 1922 to become one of the founders of the Mexican mural movement. Between 1922 and 1930 he decorated the Anfiteatro Bolivar of the National Preparatory School, the Ministry of Education Building, both in Mexico City, the chapel of the National School of Agriculture at Chapingo, and began work in the Palacio de Cortes at Cuernavaca. Working in. the United States between 1930 and 1934, Rivera created murals for the California School of Fine Arts, the Detroit Institute of Arts, and the RCA Building, the latter—ultimately destroyed— the subject of tremendous controversy. Other notable Mexican work includes murals representing various aspects of Mexican history in the Palacio Nacional (1929-35, 1944-50).
José María Sert (1876-1945) was corn in Barcelona, Spain. Moving to Paris in his early twenties to study art, he spent most of his career there. He held his first American exhibition at the Wildensteiij-Galleries, New York, in the spring of 1924. Primarily known for his work as a muralist, Sert designed murals for the winter homes of Joshua S. Cosden, Edward T. Stotesbury, and Addison Mizner, adorned the north dining room of the Waldorf-Astoria Hotel with a series of murals depicting the marriage of Quiteria in Cervantes' Don Quixote, and decorated the council chambers in the league of Nations building in Geneva (1930). His murals for the RCA Building were carried out between 1933 and 1941, gaining a certain notoriety, because they, in part, replaced the destroyed Diego Rivera mural.
While the choice of foreign artists was controversial, even further controversy was to follow. The artists began working en the murals in late 1932. Rivera objected to the color scheme and the requirement to paint on canvas, and through the intervention of Nelson Rockefeller, John D. Rockefeller, Jr.'s sen, was allowed to paint on the plaster in tempera and to use color. Rivera began work in March 1933; his assistants had previously prepared the wall and paint and were transferring his sketches to the plaster. As the painting took form, its socialist inclinations became obvious. Prominently displayed in the composition were a head of Lenin and workers parading with red flags. Nelson Rockefeller requested the substitution of another face. Rivera suggested a partial change in composition, one which would leave Lenin in place but balanced by an American historical leader; failing that, he wrote "rather than mutilate the conception I should prefer the physical destruction of the conception in its entirety."
On May 9, the Center ordered Rivera to stop work and covered the fresco with canvas. Rivera was paid in full, and on February 9, 1934, the fresco was destroyed and removed, not to be replaced until 1937, by another Sert work.
Sert's initial work for the RCA Building was installed along the north corridor in May 1933. Painted in his Paris studio on canvas, each panel is 25 feet wide by 17 feet high and depicts one aspect of "man's new mastery of the problems of modem civilization." Unlike Rivera, Sert had no intention of making a political statement. He considered mural painting "the complement of architecture. . . .On those walls the moralist puts what is called for. Nothing more, nothing less. . . .Mural painting is an extension of a building's function. It is a part of building, and no muralist must ever forget that."
Brangwyn's work for the south corridor did not arrive until December 1933. Like Sert's work, these are four panels, 25 feet by 17 feet. Brangwyn had no problems with the theme—man's relationship to society—but chose in the final panel to depict the Sermon on the Mount. Doubts were raised by Rockefeller Center officials, perhaps made sensitive by the Lenin controversy, about the depiction of the figure of Christ, suggesting that a light shining down from heaven might suffice. Brangwyn objected, and finally the problem was solved by showing Christ as a hooded figure, his back turned to the spectator, standing against a background of lighted clouds.
Sert's 1937 mural on the west wall of the entrance lobby replaced the disgraced Rivera work, after negotiations with Picasso to fill the space col lapsed. Titled "American Progress, the Triumph of Man's Accomplishments Through Physical and Mental Labor," it completed "the pictorial epic of humanity's struggle begun in the other murals"
Another Sert mural was installed in March 1941 on the ceiling above the Rockefeller Plaza entrance. Entitled "Time" it was put in place after the lobby lighting system was modified to allow for its illumination. Other Sert murals may be seen on the north and south walls of the first elevator bank, representing the spirit of dance and man's triumph in communication, on the north and south stairways to the mezzanine (these are titled "Contest-1940" and "Fraternity of Men") and on the north and south balustrades, representing "Fire" and "Light." These were installed in 1937.
Conception and Design
The design of the lobby of the RCA Building is a continuation of the exterior building design, with its emphasis on form and axis, as well as a major mural program which extends the overall art scheme of Rockefeller Center.
Lobbies of office buildings of this period generally combined two functions: a grand entrance and public space, and a passageway to the elevator system. The Chrysler Building's lobby (1928-30) is a prime example: a highly ornamental triangular-shaped lobby, whose vertex is the entrance and whose base is a wall opening with two sets of elevator banks. The Empire State Building (1930-31) because of its size and layout required a separation of the two functions, with a chapel-like grand entrance space, and a series of corridors leading to the elevators. The RCA Building lobby employs a similar scheme. /
The layout of the lobby floor was in large part dictated by that of the general office floor plans. Because of Todd's requirement that no office be more than 27-1/2 feet from a window, the elevators were placed in central banks and then surrounded with corridors and offices. In the lobby the central core of elevators is flanked by circulation corridors and then by shops opening onto the corridors. Access, too, had to be provided to the NBC Studios in the mid-section of the building. This is accomplished by means of a separate lobby with its own elevator bank. In addition, easy access was required to the underground concourse and the balconies at mezzanine level. Staircases flanking the entrance lobby and within the central core serve this purpose. The manifestation of the long corridors and elevator banks is that of a large public concourse.
An effect of grandeur was sought in the entrance lobby, but because of the service core this occupies a relatively confined area. The architects chose to maximize the effect by creating a double-height space which opens from the Rockefeller Plaza entrance and continues into the corridors through means of mezzanine balconies. These, in turn, allow access to second floor office space. The character of the double-height space is further enhanced by the mural program. The use of rich, elegant materials, such as veined marbles and bronze, and the attention to detail are characteristic of the quality displayed throughout the construction of Rockefeller Center. The details themselves, from shopfronts to indicator signs, from ventilation grilles to elevator doors, are modernistic in design, in keeping with the overall design of the Center.
Description
The interior of the RCA Building consists of two sections: the entrance lobby off Rockefeller Plaza, and the connecting corridors and elevator banks which , with the inner store windows and entrances, create the effect of a grand concourse.
The entrance lobby, opening off Rockefeller Plaza, is a relatively restricted space. On the eastern wall is a the major entrance, and at the west is the information desk, behind which rises Sert's mural of "American Progress." The lower portion of the entrance wall contains six sets of revolving doors and two sets of double-leaf doors of bronze and glass set within a paneled bronze screen which projects slightly into the space. Rising above the doorways is a large screen of cast glass designed by Lee Lawrie- Fifty-five feet long and fifteen feet high, it is molded in high relief and constructed of uniform blocks, 19 by 29 by 3 inches, bonded by vinelite. Flanking the entrance are stairways leading up to the mezzanine and staircases and escalators leading down to the underground concourse. The information desk opposite the doorway is of Champlain gray marble, which is almost black in color, adorned with incised moldings at top and bottom.
Four large piers, faced with reeded ivory marble terminating in a bronze molding, channel traffic through the space. Light fixtures are incorporated into the piers so as to illuminate Sert's mural of '*Time," which spreads out over the entire entrance lobby ceiling. Three figures, representing Past, Present, and Future, are shewn with their feet resting on the tops of the piers. Hour glasses, held by the figures of Past and Future, are being placed on the scales held by the figure of Present. The airplanes in flight are to indicate iron's partial conquest of time and space.
Sert's mural "American Progress" on the wall behind the information desk (which is also the eastern wall of the easternmost elevator bank) depicts America's development through the union of intelligence and strength. On the right are figures of Poetry, Music, and Dance looking upward for inspiration; on the left are men of action, represented by statues of labor. These two groups flank pictures of Ralph Waldo Oner son, the philosopher and thinker, and Abraham Lincoln, as the man of action. In the center background are the towers of Rockefeller Center. This device of depicting the building in lobby art was a favorite with designers of the period, being used in both the Chrysler Building and the Empire State Building.
The lobby opens into corridors flanking the elevator banks, and for the extent of the first five elevator banks and the elevator hallways, this is a double-height space dominated by rows of piers, carrying on the east-west axis, faced with the same ivory marble as that used on the piers in the entrance lobby. The walls are faced with Champlain marble up to the height of the shopfronts and elevator doors, terminating in bronze moldings. Beveled bronze service doors may be seen on the outer walls opposite the piers. Above the marble is a beige plaster surface on the outer vails, while the inner elevator bank walls are adorned with morals which wrap around the corners onto the elevator hallway walls.
The work of Sert is represented by figures hoisting a globe up over scaffolding depicting man's triumph in communications—radio, telephone, and telegraph— on the south wall of the first elevator bank, and figures representing the spirit of the dance on the north wall of the first elevator bank. Sert's first four murals for the RCA Building may be seen on the next four elevator banks facing the north corridor.
In order they are: "The abolition of pain and labor of former ages by the creative intelligence of the machine,'' with human figures and oxen pulling a heavy load with a railroad engine in the background; "The conquests of the pests and epidemics of yesteryear by scientific invention,'' with figures lined. ' up waiting to received inoculations; "The stamping out of tyranny and slavery," with figures of slaves pushing enormous blocks of stone; and "The suppression of war through the combined faculties of man applied to the quest of human happiness," dominated by figures grouped around and emerging from giant cannons.
The four elevator banks on the south corridor display Frank Brangwyn's murals and are meant to be seen in sequence running west to east: "Man laboring painfully with his own hands; living precariously and adventurously with courage, fortitude, and the indomitable will to survive," depicting figures in the wilderness; "Man the creator and master of the tool. Strengthening the foundations and multiplying the comforts of his abiding place," with figures in an arbor cultivating vines; "Man the master and servant of the machine, harnessing to his will the forces of the material world, mechanizing labor and adding these to the promise of leisure," with figures working at a forge; and "Man's ultimate destiny depends not on whether he can learn new lessons or make new discoveries and conquest, but on his acceptance of the lesson taught him close upon two thousand years ago," with figures listening to Christ preaching the Sermon on the Mount.
On the outer walls are a series of shopfronts with doors and windows framed in bronze. In the elevator hallways, the elevator doors are of beveled bronze and are set in bronze reveals. Ventilator grilles, directory boards, indicator signs, elevator indicator signs, and elevator indicator lights in this section are framed in bronze, employing curved, streamlined motifs.
The outer walls rise to mezzanine balconies with hand seme streamlined bronze railings on both the north and south. The stairways leading to the mezzanine flanking the entrance have Champlain marble wainscoting and bronze railings. Adorning the staircases are additional Sert murals: "Contest-1940" with figures of the five races of mankind using the world as a football to compete for global supremacy, at the north, and "Fraternity of Men" with the figures of the five races clasping their hands in brotherhood, at the south. Terminating the double-height corridors, the balconies extend across the ground floor corridors at mezzanine level, and the balcony fronts display Sert murals: "Fire" representing the sun at the north? and "Light" depicting the supreme ruler of the world at the south. Throughout the murals adopt a monochromatic color scheme of beige, gray, and black which harmonizes with the other interior finishes.
At the mezzanine level the inside of the balcony is faced with Champlain marble. The outer walls are ivory marble above a Champlain marble wainscoting terminating in a bronze molding at the height of the doorways. The walls above are plain beige plaster, as are the ceilings.
Offices with bronze doors and bronze window surrounds open onto the balconies. The mezzanine continues as corridors westward beyond the balconies; both inner and outer walls have finishes similar to the outer walls of the balconies, and the office door and window configurations and finishes as they open onto the corridors are also similar. In the area adjacent to the western elevator bank are four piers, faced in ivory marble above a Champlain marble base and terminating in bronze molding strips-The floors throughout the mezzanine are of black terrazzo executed in rectangular patterns outlined with bronze strips.
At ground floor level, the corridors continue westward along the east-west axis beyond the fifth elevator bank. The ceiling level drops and this difference in height is marked by a change in materials. The corridor walls are faced in Champlain marble terminating in bronze moldings, and piers, continuing in the line of those in the double-height corridors, are also faced in Champlain marble terminating in bronze molding strips. Bronze waste receptacles are placed at the bases of several. The ceilings are white plaster. The treatment of the shopfronts on the outer walls is like that of the shopfronts in the double-height corridors. The floor surface is uniform throughout the ground floor, with black terrazzo set in panels with a green-gray center section, outlined with bronze strips.
Hallways extend from the corridors leading to the entrances from 49th Street and 50th Street. Each has two sets of revolving doors, framed in bronze. Bronze letters with the street names are placed above the doors. The walls continue the Champlain marble facing and bronze moldings of the corridor walls and are accented by bronze ventilation grilles, taking streamlined forms, display windows framed in bronze, and beveled bronze service doors. Directory boards and indicator signs throughout the corridors and hallways are outlined with bronze in streamlined motifs.
West of the elevator banks is a stairway leading down to the underground concourse; this is lined with Champlain marble and has bronze moldings, and handsome bronze railings. Similarly a stairway lined with Champlain marble and ivory marble in the same location leads up to the mezzanine. An enclosed stairway leads up to the mezzanine at the juncture of the RCA Building with the RCA Building West, while an open stairway leads down to the underground concourse. Both stairways are lined with Champlain marble and have bronze railings and bronze moldings.
The NBC lobby is faced with Champlain marble terminating in bronze moldings in the deep reveals opening from the corridors, and light green marble on the walls, terminating in nickel bronze moldings.
- From the 1985 NYCLPC Landmark Designation Report
A good thing continues
Some six months ago, I posted almost 100 images and a few thoughts I felt were missing from the many existing RX1 reviews. The outpouring of support and interest in that article was very gratifying. When I published, I had used the camera for six full months, enough time to come to a view of its strengths and weaknesses and to produce a small portfolio of good images, but not enough time to see the full picture (pun intended). In the following six months, I have used the camera at least as frequently as in the first six and have produced another small set of good images. It should be noted that my usage of the RX1 in the last six (and especially in the last 3) months has involved less travel and more time with the family and around the house; I will share relatively few of these images but will spend some time sharing my impressions of its functionality for family snapshots as I am sure there is some interest. And let it be said here: one of the primary motivations to purchase the camera was to take more photos with the family, and after one full year I can confidently say: money well spent.
The A7/r game-changer?
In the past six months, Sony have announced and released two full-frame, interchangeable lens cameras that clearly take design cues from the RX1: the A7 and the A7r. These cameras are innovative and highly capable and, as such, are in the midst of taking the photography world by storm. I think they are compelling enough cameras that I wonder whether Sony is wasting its energy continuing to develop further A-mount cameras. Sony deserve credit for a bold strategy—many companies would have been content to allow the success of the the RX1 (and RX1R) generate further sales before pushing further into the white space left unexplored by camera makers with less ambition.This is not the place to detail the relative advantages and disadvantages of the RX1 versus the A7/r except to make the following point. I currently use a Nikon D800 and an RX1: were I to sell both and purchase the A7r + 35mm f/2.8 I would in many ways lose nothing by way of imaging capability or lens compatibility but would pocket the surplus $1250-1750. Indeed this loyal Nikon owner thought long and hard about doing so, which speaks to the strategic importance of these cameras for a company trying to make inroads into a highly concentrated market.Ultimately, I opted to hang onto the two cameras I have (although this decision is one that I revisit time and time again) and continue to use them as I have for the past year. Let me give you a quick flavor of why.
The RX1 is smaller and more discrete
This is a small a point, but my gut reaction to the A7/r was: much smaller than the D800, not as small as the RX1. The EVF atop the A7/r and the larger profile of interchangeable mount lenses means that I would not be able to slip the A7/r into a pocket the way I can the RX1. Further, by virtue of using the EVF and its loud mechanical shutter, the A7/r just isn’t as stealthy as the RX1. Finally, f/2 beats the pants off of f/2.8 at the same or smaller size.At this point, some of you may be saying, “Future Sony releases will allow you to get a body without an EVF and get an f/2 lens that has a slimmer profile, etc, etc.” And that’s just the point: to oversimplify things, the reason I am keeping my RX1 is that Sony currently offers something close to an A7 body without a built-in EVF and with a slimmer profile 35mm f/2.
The D800 has important functional advantages
On the other side of the spectrum, the AF speed of the A7/r just isn’t going to match the D800, especially when the former is equipped with a Nikon lens and F-mount adapter. EVFs cannot yet match the experience of looking through the prism and the lens (I expect they will match soon, but aren’t there yet). What’s more, I have made such an investment in Nikon glass that I can’t yet justify purchasing an adapter for a Sony mount or selling them all for Sony’s offerings (many of which aren’t to market yet).Now, all of these are minor points and I think all of them disappear with an A8r, but they add up to something major: I have two cameras very well suited to two different types of shooting, and I ask myself if I gain or lose by getting something in between—something that wasn’t quite a pocket shooter and something that was quite a DSLR? You can imagine, however, that if I were coming to the market without a D800 and an RX1, that my decision would be far different: dollar for dollar, the A7/r would be a no-brainer.During the moments when I consider selling to grab an A7r, I keep coming back to a thought I had a month or so before the RX1 was announced. At that time I was considering something like the NEX cameras with a ZM 21mm f/2.8 and I said in my head, “I wish someone would make a carry-around camera with a full frame sensor and a fixed 35mm f/2.8 or f/2.” Now you understand how attractive the RX1 is to me and what a ridiculously high bar exists for another camera system to reach.
Okay, so what is different from the last review?
For one, I had an issue with the camera’s AF motor failing to engage and giving me an E61:00 error. I had to send it out to Sony for repairs (via extended warranty and service plan). I detailed my experience with Sony Service here [insert link] and I write to you as a very satisfied customer. That is to say, I have 3 years left on a 4 year + accidental damage warranty and I feel confident enough in that coverage to say that I will have this beauty in working order for at least another 3 years.For two, I’ve spent significantly less time thinking of this camera as a DSLR replacement and have instead started to develop a very different way of shooting with it. The activation barrier to taking a shot with my D800 is quite high. Beyond having to bring a large camera wherever you go and have it in hand, a proper camera takes two hands and full attention to produce an image. I shoot slowly and methodically and often from a tripod with the D800. In contrast, I can pull the RX1 out, pop off the lens cap, line up and take a shot with one hand (often with a toddler in the other). This fosters a totally different type of photography.
My “be-there” camera
The have-everywhere camera that gives DSLR type controls to one-handed shooting lets me pursue images that happen very quickly or images that might not normally meet the standards of “drag-the-DSLR-out-of-the-bag.” Many of those images you’ll see on this post. A full year of shooting and I can say this with great confidence: the RX1 is a terrific mash-up of point-and-shoot and DSLR not just in image quality and features, but primarily in the product it helps me create. To take this thinking a bit further: I find myself even processing images from the RX1 differently than I would from my DSLR. So much so that I have strongly considered starting a tumblr and posting JPEGs directly from the RX1 via my phone or an iPad rather than running the bulk of them through Lightroom, onto Flickr and then on the blog (really this is just a matter of time, stay tuned, and those readers who have experience with tumblr, cloud image storage and editing, etc, etc, please contact me, I want to pick your brain).Put simply, I capture more spontaneous and beautiful “moments” than I might have otherwise. Photography is very much an exercise in “f/8 and be there,” and the RX1 is my go-to “be there” camera.
The family camera
I mentioned earlier that I justified the purchase of the RX1 partly as a camera to be used to document the family moments into which a DSLR doesn’t neatly fit. Over the past year I’ve collected thousands and thousands of family images with the RX1. The cold hard truth is that many of those photos could be better if I’d taken a full DSLR kit with me to the park or the beach or the grocery store each time. The RX1 is a difficult camera to use on a toddler (or any moving subject for that matter); autofocus isn’t as fast as a professional DSLR, it’s difficult to perfectly compose via an LCD (especially in bright sunlight), but despite these shortcomings, it’s been an incredibly useful family camera. There are simply so many beautiful moments where I had the RX1 over my shoulder, ready to go that whatever difficulties exist relative to a DSLR, those pale in comparison to the power of it’s convenience. The best camera is the one in your hand.
Where to go from here.
So what is the value of these RX1 going forward, especially in a world of the A7/r and it’s yet-to-be-born siblings without an EVF and a pancake lens? Frankly, at its current price (which is quite fair when you consider the value of the the body and the lens) I see precious little room for an independent offering versus a mirrorless, interchangeable lens system with the same image quality in a package just as small. That doesn’t mean Sony won’t make an RX2 or an RX1 Mark II (have a look at it’s other product lines to see how many SKUs are maintained despite low demand). Instead, I see the RX1 as a bridge that needed to exist for engineers, managers, and the market to make it to the A7/r and it’s descendants.A Facebook friend recently paid me a great compliment; he said something like, “Justin, via your blog, you’ve sold a ton of RX1 cameras.” Indeed, despite my efforts not to be a salesman, I think he’s right: I have and would continue to recommend this camera.The true value of the RX1 going forward is for those of us who have the thing on our shoulders; and yes, if you have an investment in and a love for a DSLR system, there’s still tremendous value in getting one, slinging it over your shoulder, and heading out into the wide, bright world; A7/r or no, this is just an unbelievably capable camera.
A good thing continues
Some six months ago, I posted almost 100 images and a few thoughts I felt were missing from the many existing RX1 reviews. The outpouring of support and interest in that article was very gratifying. When I published, I had used the camera for six full months, enough time to come to a view of its strengths and weaknesses and to produce a small portfolio of good images, but not enough time to see the full picture (pun intended). In the following six months, I have used the camera at least as frequently as in the first six and have produced another small set of good images. It should be noted that my usage of the RX1 in the last six (and especially in the last 3) months has involved less travel and more time with the family and around the house; I will share relatively few of these images but will spend some time sharing my impressions of its functionality for family snapshots as I am sure there is some interest. And let it be said here: one of the primary motivations to purchase the camera was to take more photos with the family, and after one full year I can confidently say: money well spent.
The A7/r game-changer?
In the past six months, Sony have announced and released two full-frame, interchangeable lens cameras that clearly take design cues from the RX1: the A7 and the A7r. These cameras are innovative and highly capable and, as such, are in the midst of taking the photography world by storm. I think they are compelling enough cameras that I wonder whether Sony is wasting its energy continuing to develop further A-mount cameras. Sony deserve credit for a bold strategy—many companies would have been content to allow the success of the the RX1 (and RX1R) generate further sales before pushing further into the white space left unexplored by camera makers with less ambition.This is not the place to detail the relative advantages and disadvantages of the RX1 versus the A7/r except to make the following point. I currently use a Nikon D800 and an RX1: were I to sell both and purchase the A7r + 35mm f/2.8 I would in many ways lose nothing by way of imaging capability or lens compatibility but would pocket the surplus $1250-1750. Indeed this loyal Nikon owner thought long and hard about doing so, which speaks to the strategic importance of these cameras for a company trying to make inroads into a highly concentrated market.Ultimately, I opted to hang onto the two cameras I have (although this decision is one that I revisit time and time again) and continue to use them as I have for the past year. Let me give you a quick flavor of why.
The RX1 is smaller and more discrete
This is a small a point, but my gut reaction to the A7/r was: much smaller than the D800, not as small as the RX1. The EVF atop the A7/r and the larger profile of interchangeable mount lenses means that I would not be able to slip the A7/r into a pocket the way I can the RX1. Further, by virtue of using the EVF and its loud mechanical shutter, the A7/r just isn’t as stealthy as the RX1. Finally, f/2 beats the pants off of f/2.8 at the same or smaller size.At this point, some of you may be saying, “Future Sony releases will allow you to get a body without an EVF and get an f/2 lens that has a slimmer profile, etc, etc.” And that’s just the point: to oversimplify things, the reason I am keeping my RX1 is that Sony currently offers something close to an A7 body without a built-in EVF and with a slimmer profile 35mm f/2.
The D800 has important functional advantages
On the other side of the spectrum, the AF speed of the A7/r just isn’t going to match the D800, especially when the former is equipped with a Nikon lens and F-mount adapter. EVFs cannot yet match the experience of looking through the prism and the lens (I expect they will match soon, but aren’t there yet). What’s more, I have made such an investment in Nikon glass that I can’t yet justify purchasing an adapter for a Sony mount or selling them all for Sony’s offerings (many of which aren’t to market yet).Now, all of these are minor points and I think all of them disappear with an A8r, but they add up to something major: I have two cameras very well suited to two different types of shooting, and I ask myself if I gain or lose by getting something in between—something that wasn’t quite a pocket shooter and something that was quite a DSLR? You can imagine, however, that if I were coming to the market without a D800 and an RX1, that my decision would be far different: dollar for dollar, the A7/r would be a no-brainer.During the moments when I consider selling to grab an A7r, I keep coming back to a thought I had a month or so before the RX1 was announced. At that time I was considering something like the NEX cameras with a ZM 21mm f/2.8 and I said in my head, “I wish someone would make a carry-around camera with a full frame sensor and a fixed 35mm f/2.8 or f/2.” Now you understand how attractive the RX1 is to me and what a ridiculously high bar exists for another camera system to reach.
Okay, so what is different from the last review?
For one, I had an issue with the camera’s AF motor failing to engage and giving me an E61:00 error. I had to send it out to Sony for repairs (via extended warranty and service plan). I detailed my experience with Sony Service here [insert link] and I write to you as a very satisfied customer. That is to say, I have 3 years left on a 4 year + accidental damage warranty and I feel confident enough in that coverage to say that I will have this beauty in working order for at least another 3 years.For two, I’ve spent significantly less time thinking of this camera as a DSLR replacement and have instead started to develop a very different way of shooting with it. The activation barrier to taking a shot with my D800 is quite high. Beyond having to bring a large camera wherever you go and have it in hand, a proper camera takes two hands and full attention to produce an image. I shoot slowly and methodically and often from a tripod with the D800. In contrast, I can pull the RX1 out, pop off the lens cap, line up and take a shot with one hand (often with a toddler in the other). This fosters a totally different type of photography.
My “be-there” camera
The have-everywhere camera that gives DSLR type controls to one-handed shooting lets me pursue images that happen very quickly or images that might not normally meet the standards of “drag-the-DSLR-out-of-the-bag.” Many of those images you’ll see on this post. A full year of shooting and I can say this with great confidence: the RX1 is a terrific mash-up of point-and-shoot and DSLR not just in image quality and features, but primarily in the product it helps me create. To take this thinking a bit further: I find myself even processing images from the RX1 differently than I would from my DSLR. So much so that I have strongly considered starting a tumblr and posting JPEGs directly from the RX1 via my phone or an iPad rather than running the bulk of them through Lightroom, onto Flickr and then on the blog (really this is just a matter of time, stay tuned, and those readers who have experience with tumblr, cloud image storage and editing, etc, etc, please contact me, I want to pick your brain).Put simply, I capture more spontaneous and beautiful “moments” than I might have otherwise. Photography is very much an exercise in “f/8 and be there,” and the RX1 is my go-to “be there” camera.
The family camera
I mentioned earlier that I justified the purchase of the RX1 partly as a camera to be used to document the family moments into which a DSLR doesn’t neatly fit. Over the past year I’ve collected thousands and thousands of family images with the RX1. The cold hard truth is that many of those photos could be better if I’d taken a full DSLR kit with me to the park or the beach or the grocery store each time. The RX1 is a difficult camera to use on a toddler (or any moving subject for that matter); autofocus isn’t as fast as a professional DSLR, it’s difficult to perfectly compose via an LCD (especially in bright sunlight), but despite these shortcomings, it’s been an incredibly useful family camera. There are simply so many beautiful moments where I had the RX1 over my shoulder, ready to go that whatever difficulties exist relative to a DSLR, those pale in comparison to the power of it’s convenience. The best camera is the one in your hand.
Where to go from here.
So what is the value of these RX1 going forward, especially in a world of the A7/r and it’s yet-to-be-born siblings without an EVF and a pancake lens? Frankly, at its current price (which is quite fair when you consider the value of the the body and the lens) I see precious little room for an independent offering versus a mirrorless, interchangeable lens system with the same image quality in a package just as small. That doesn’t mean Sony won’t make an RX2 or an RX1 Mark II (have a look at it’s other product lines to see how many SKUs are maintained despite low demand). Instead, I see the RX1 as a bridge that needed to exist for engineers, managers, and the market to make it to the A7/r and it’s descendants.A Facebook friend recently paid me a great compliment; he said something like, “Justin, via your blog, you’ve sold a ton of RX1 cameras.” Indeed, despite my efforts not to be a salesman, I think he’s right: I have and would continue to recommend this camera.The true value of the RX1 going forward is for those of us who have the thing on our shoulders; and yes, if you have an investment in and a love for a DSLR system, there’s still tremendous value in getting one, slinging it over your shoulder, and heading out into the wide, bright world; A7/r or no, this is just an unbelievably capable camera.
A good thing continues
Some six months ago, I posted almost 100 images and a few thoughts I felt were missing from the many existing RX1 reviews. The outpouring of support and interest in that article was very gratifying. When I published, I had used the camera for six full months, enough time to come to a view of its strengths and weaknesses and to produce a small portfolio of good images, but not enough time to see the full picture (pun intended). In the following six months, I have used the camera at least as frequently as in the first six and have produced another small set of good images. It should be noted that my usage of the RX1 in the last six (and especially in the last 3) months has involved less travel and more time with the family and around the house; I will share relatively few of these images but will spend some time sharing my impressions of its functionality for family snapshots as I am sure there is some interest. And let it be said here: one of the primary motivations to purchase the camera was to take more photos with the family, and after one full year I can confidently say: money well spent.
The A7/r game-changer?
In the past six months, Sony have announced and released two full-frame, interchangeable lens cameras that clearly take design cues from the RX1: the A7 and the A7r. These cameras are innovative and highly capable and, as such, are in the midst of taking the photography world by storm. I think they are compelling enough cameras that I wonder whether Sony is wasting its energy continuing to develop further A-mount cameras. Sony deserve credit for a bold strategy—many companies would have been content to allow the success of the the RX1 (and RX1R) generate further sales before pushing further into the white space left unexplored by camera makers with less ambition.This is not the place to detail the relative advantages and disadvantages of the RX1 versus the A7/r except to make the following point. I currently use a Nikon D800 and an RX1: were I to sell both and purchase the A7r + 35mm f/2.8 I would in many ways lose nothing by way of imaging capability or lens compatibility but would pocket the surplus $1250-1750. Indeed this loyal Nikon owner thought long and hard about doing so, which speaks to the strategic importance of these cameras for a company trying to make inroads into a highly concentrated market.Ultimately, I opted to hang onto the two cameras I have (although this decision is one that I revisit time and time again) and continue to use them as I have for the past year. Let me give you a quick flavor of why.
The RX1 is smaller and more discrete
This is a small a point, but my gut reaction to the A7/r was: much smaller than the D800, not as small as the RX1. The EVF atop the A7/r and the larger profile of interchangeable mount lenses means that I would not be able to slip the A7/r into a pocket the way I can the RX1. Further, by virtue of using the EVF and its loud mechanical shutter, the A7/r just isn’t as stealthy as the RX1. Finally, f/2 beats the pants off of f/2.8 at the same or smaller size.At this point, some of you may be saying, “Future Sony releases will allow you to get a body without an EVF and get an f/2 lens that has a slimmer profile, etc, etc.” And that’s just the point: to oversimplify things, the reason I am keeping my RX1 is that Sony currently offers something close to an A7 body without a built-in EVF and with a slimmer profile 35mm f/2.
The D800 has important functional advantages
On the other side of the spectrum, the AF speed of the A7/r just isn’t going to match the D800, especially when the former is equipped with a Nikon lens and F-mount adapter. EVFs cannot yet match the experience of looking through the prism and the lens (I expect they will match soon, but aren’t there yet). What’s more, I have made such an investment in Nikon glass that I can’t yet justify purchasing an adapter for a Sony mount or selling them all for Sony’s offerings (many of which aren’t to market yet).Now, all of these are minor points and I think all of them disappear with an A8r, but they add up to something major: I have two cameras very well suited to two different types of shooting, and I ask myself if I gain or lose by getting something in between—something that wasn’t quite a pocket shooter and something that was quite a DSLR? You can imagine, however, that if I were coming to the market without a D800 and an RX1, that my decision would be far different: dollar for dollar, the A7/r would be a no-brainer.During the moments when I consider selling to grab an A7r, I keep coming back to a thought I had a month or so before the RX1 was announced. At that time I was considering something like the NEX cameras with a ZM 21mm f/2.8 and I said in my head, “I wish someone would make a carry-around camera with a full frame sensor and a fixed 35mm f/2.8 or f/2.” Now you understand how attractive the RX1 is to me and what a ridiculously high bar exists for another camera system to reach.
Okay, so what is different from the last review?
For one, I had an issue with the camera’s AF motor failing to engage and giving me an E61:00 error. I had to send it out to Sony for repairs (via extended warranty and service plan). I detailed my experience with Sony Service here [insert link] and I write to you as a very satisfied customer. That is to say, I have 3 years left on a 4 year + accidental damage warranty and I feel confident enough in that coverage to say that I will have this beauty in working order for at least another 3 years.For two, I’ve spent significantly less time thinking of this camera as a DSLR replacement and have instead started to develop a very different way of shooting with it. The activation barrier to taking a shot with my D800 is quite high. Beyond having to bring a large camera wherever you go and have it in hand, a proper camera takes two hands and full attention to produce an image. I shoot slowly and methodically and often from a tripod with the D800. In contrast, I can pull the RX1 out, pop off the lens cap, line up and take a shot with one hand (often with a toddler in the other). This fosters a totally different type of photography.
My “be-there” camera
The have-everywhere camera that gives DSLR type controls to one-handed shooting lets me pursue images that happen very quickly or images that might not normally meet the standards of “drag-the-DSLR-out-of-the-bag.” Many of those images you’ll see on this post. A full year of shooting and I can say this with great confidence: the RX1 is a terrific mash-up of point-and-shoot and DSLR not just in image quality and features, but primarily in the product it helps me create. To take this thinking a bit further: I find myself even processing images from the RX1 differently than I would from my DSLR. So much so that I have strongly considered starting a tumblr and posting JPEGs directly from the RX1 via my phone or an iPad rather than running the bulk of them through Lightroom, onto Flickr and then on the blog (really this is just a matter of time, stay tuned, and those readers who have experience with tumblr, cloud image storage and editing, etc, etc, please contact me, I want to pick your brain).Put simply, I capture more spontaneous and beautiful “moments” than I might have otherwise. Photography is very much an exercise in “f/8 and be there,” and the RX1 is my go-to “be there” camera.
The family camera
I mentioned earlier that I justified the purchase of the RX1 partly as a camera to be used to document the family moments into which a DSLR doesn’t neatly fit. Over the past year I’ve collected thousands and thousands of family images with the RX1. The cold hard truth is that many of those photos could be better if I’d taken a full DSLR kit with me to the park or the beach or the grocery store each time. The RX1 is a difficult camera to use on a toddler (or any moving subject for that matter); autofocus isn’t as fast as a professional DSLR, it’s difficult to perfectly compose via an LCD (especially in bright sunlight), but despite these shortcomings, it’s been an incredibly useful family camera. There are simply so many beautiful moments where I had the RX1 over my shoulder, ready to go that whatever difficulties exist relative to a DSLR, those pale in comparison to the power of it’s convenience. The best camera is the one in your hand.
Where to go from here.
So what is the value of these RX1 going forward, especially in a world of the A7/r and it’s yet-to-be-born siblings without an EVF and a pancake lens? Frankly, at its current price (which is quite fair when you consider the value of the the body and the lens) I see precious little room for an independent offering versus a mirrorless, interchangeable lens system with the same image quality in a package just as small. That doesn’t mean Sony won’t make an RX2 or an RX1 Mark II (have a look at it’s other product lines to see how many SKUs are maintained despite low demand). Instead, I see the RX1 as a bridge that needed to exist for engineers, managers, and the market to make it to the A7/r and it’s descendants.A Facebook friend recently paid me a great compliment; he said something like, “Justin, via your blog, you’ve sold a ton of RX1 cameras.” Indeed, despite my efforts not to be a salesman, I think he’s right: I have and would continue to recommend this camera.The true value of the RX1 going forward is for those of us who have the thing on our shoulders; and yes, if you have an investment in and a love for a DSLR system, there’s still tremendous value in getting one, slinging it over your shoulder, and heading out into the wide, bright world; A7/r or no, this is just an unbelievably capable camera.
A good thing continues
Some six months ago, I posted almost 100 images and a few thoughts I felt were missing from the many existing RX1 reviews. The outpouring of support and interest in that article was very gratifying. When I published, I had used the camera for six full months, enough time to come to a view of its strengths and weaknesses and to produce a small portfolio of good images, but not enough time to see the full picture (pun intended). In the following six months, I have used the camera at least as frequently as in the first six and have produced another small set of good images. It should be noted that my usage of the RX1 in the last six (and especially in the last 3) months has involved less travel and more time with the family and around the house; I will share relatively few of these images but will spend some time sharing my impressions of its functionality for family snapshots as I am sure there is some interest. And let it be said here: one of the primary motivations to purchase the camera was to take more photos with the family, and after one full year I can confidently say: money well spent.
The A7/r game-changer?
In the past six months, Sony have announced and released two full-frame, interchangeable lens cameras that clearly take design cues from the RX1: the A7 and the A7r. These cameras are innovative and highly capable and, as such, are in the midst of taking the photography world by storm. I think they are compelling enough cameras that I wonder whether Sony is wasting its energy continuing to develop further A-mount cameras. Sony deserve credit for a bold strategy—many companies would have been content to allow the success of the the RX1 (and RX1R) generate further sales before pushing further into the white space left unexplored by camera makers with less ambition.This is not the place to detail the relative advantages and disadvantages of the RX1 versus the A7/r except to make the following point. I currently use a Nikon D800 and an RX1: were I to sell both and purchase the A7r + 35mm f/2.8 I would in many ways lose nothing by way of imaging capability or lens compatibility but would pocket the surplus $1250-1750. Indeed this loyal Nikon owner thought long and hard about doing so, which speaks to the strategic importance of these cameras for a company trying to make inroads into a highly concentrated market.Ultimately, I opted to hang onto the two cameras I have (although this decision is one that I revisit time and time again) and continue to use them as I have for the past year. Let me give you a quick flavor of why.
The RX1 is smaller and more discrete
This is a small a point, but my gut reaction to the A7/r was: much smaller than the D800, not as small as the RX1. The EVF atop the A7/r and the larger profile of interchangeable mount lenses means that I would not be able to slip the A7/r into a pocket the way I can the RX1. Further, by virtue of using the EVF and its loud mechanical shutter, the A7/r just isn’t as stealthy as the RX1. Finally, f/2 beats the pants off of f/2.8 at the same or smaller size.At this point, some of you may be saying, “Future Sony releases will allow you to get a body without an EVF and get an f/2 lens that has a slimmer profile, etc, etc.” And that’s just the point: to oversimplify things, the reason I am keeping my RX1 is that Sony currently offers something close to an A7 body without a built-in EVF and with a slimmer profile 35mm f/2.
The D800 has important functional advantages
On the other side of the spectrum, the AF speed of the A7/r just isn’t going to match the D800, especially when the former is equipped with a Nikon lens and F-mount adapter. EVFs cannot yet match the experience of looking through the prism and the lens (I expect they will match soon, but aren’t there yet). What’s more, I have made such an investment in Nikon glass that I can’t yet justify purchasing an adapter for a Sony mount or selling them all for Sony’s offerings (many of which aren’t to market yet).Now, all of these are minor points and I think all of them disappear with an A8r, but they add up to something major: I have two cameras very well suited to two different types of shooting, and I ask myself if I gain or lose by getting something in between—something that wasn’t quite a pocket shooter and something that was quite a DSLR? You can imagine, however, that if I were coming to the market without a D800 and an RX1, that my decision would be far different: dollar for dollar, the A7/r would be a no-brainer.During the moments when I consider selling to grab an A7r, I keep coming back to a thought I had a month or so before the RX1 was announced. At that time I was considering something like the NEX cameras with a ZM 21mm f/2.8 and I said in my head, “I wish someone would make a carry-around camera with a full frame sensor and a fixed 35mm f/2.8 or f/2.” Now you understand how attractive the RX1 is to me and what a ridiculously high bar exists for another camera system to reach.
Okay, so what is different from the last review?
For one, I had an issue with the camera’s AF motor failing to engage and giving me an E61:00 error. I had to send it out to Sony for repairs (via extended warranty and service plan). I detailed my experience with Sony Service here [insert link] and I write to you as a very satisfied customer. That is to say, I have 3 years left on a 4 year + accidental damage warranty and I feel confident enough in that coverage to say that I will have this beauty in working order for at least another 3 years.For two, I’ve spent significantly less time thinking of this camera as a DSLR replacement and have instead started to develop a very different way of shooting with it. The activation barrier to taking a shot with my D800 is quite high. Beyond having to bring a large camera wherever you go and have it in hand, a proper camera takes two hands and full attention to produce an image. I shoot slowly and methodically and often from a tripod with the D800. In contrast, I can pull the RX1 out, pop off the lens cap, line up and take a shot with one hand (often with a toddler in the other). This fosters a totally different type of photography.
My “be-there” camera
The have-everywhere camera that gives DSLR type controls to one-handed shooting lets me pursue images that happen very quickly or images that might not normally meet the standards of “drag-the-DSLR-out-of-the-bag.” Many of those images you’ll see on this post. A full year of shooting and I can say this with great confidence: the RX1 is a terrific mash-up of point-and-shoot and DSLR not just in image quality and features, but primarily in the product it helps me create. To take this thinking a bit further: I find myself even processing images from the RX1 differently than I would from my DSLR. So much so that I have strongly considered starting a tumblr and posting JPEGs directly from the RX1 via my phone or an iPad rather than running the bulk of them through Lightroom, onto Flickr and then on the blog (really this is just a matter of time, stay tuned, and those readers who have experience with tumblr, cloud image storage and editing, etc, etc, please contact me, I want to pick your brain).Put simply, I capture more spontaneous and beautiful “moments” than I might have otherwise. Photography is very much an exercise in “f/8 and be there,” and the RX1 is my go-to “be there” camera.
The family camera
I mentioned earlier that I justified the purchase of the RX1 partly as a camera to be used to document the family moments into which a DSLR doesn’t neatly fit. Over the past year I’ve collected thousands and thousands of family images with the RX1. The cold hard truth is that many of those photos could be better if I’d taken a full DSLR kit with me to the park or the beach or the grocery store each time. The RX1 is a difficult camera to use on a toddler (or any moving subject for that matter); autofocus isn’t as fast as a professional DSLR, it’s difficult to perfectly compose via an LCD (especially in bright sunlight), but despite these shortcomings, it’s been an incredibly useful family camera. There are simply so many beautiful moments where I had the RX1 over my shoulder, ready to go that whatever difficulties exist relative to a DSLR, those pale in comparison to the power of it’s convenience. The best camera is the one in your hand.
Where to go from here.
So what is the value of these RX1 going forward, especially in a world of the A7/r and it’s yet-to-be-born siblings without an EVF and a pancake lens? Frankly, at its current price (which is quite fair when you consider the value of the the body and the lens) I see precious little room for an independent offering versus a mirrorless, interchangeable lens system with the same image quality in a package just as small. That doesn’t mean Sony won’t make an RX2 or an RX1 Mark II (have a look at it’s other product lines to see how many SKUs are maintained despite low demand). Instead, I see the RX1 as a bridge that needed to exist for engineers, managers, and the market to make it to the A7/r and it’s descendants.A Facebook friend recently paid me a great compliment; he said something like, “Justin, via your blog, you’ve sold a ton of RX1 cameras.” Indeed, despite my efforts not to be a salesman, I think he’s right: I have and would continue to recommend this camera.The true value of the RX1 going forward is for those of us who have the thing on our shoulders; and yes, if you have an investment in and a love for a DSLR system, there’s still tremendous value in getting one, slinging it over your shoulder, and heading out into the wide, bright world; A7/r or no, this is just an unbelievably capable camera.
A good thing continues
Some six months ago, I posted almost 100 images and a few thoughts I felt were missing from the many existing RX1 reviews. The outpouring of support and interest in that article was very gratifying. When I published, I had used the camera for six full months, enough time to come to a view of its strengths and weaknesses and to produce a small portfolio of good images, but not enough time to see the full picture (pun intended). In the following six months, I have used the camera at least as frequently as in the first six and have produced another small set of good images. It should be noted that my usage of the RX1 in the last six (and especially in the last 3) months has involved less travel and more time with the family and around the house; I will share relatively few of these images but will spend some time sharing my impressions of its functionality for family snapshots as I am sure there is some interest. And let it be said here: one of the primary motivations to purchase the camera was to take more photos with the family, and after one full year I can confidently say: money well spent.
The A7/r game-changer?
In the past six months, Sony have announced and released two full-frame, interchangeable lens cameras that clearly take design cues from the RX1: the A7 and the A7r. These cameras are innovative and highly capable and, as such, are in the midst of taking the photography world by storm. I think they are compelling enough cameras that I wonder whether Sony is wasting its energy continuing to develop further A-mount cameras. Sony deserve credit for a bold strategy—many companies would have been content to allow the success of the the RX1 (and RX1R) generate further sales before pushing further into the white space left unexplored by camera makers with less ambition.This is not the place to detail the relative advantages and disadvantages of the RX1 versus the A7/r except to make the following point. I currently use a Nikon D800 and an RX1: were I to sell both and purchase the A7r + 35mm f/2.8 I would in many ways lose nothing by way of imaging capability or lens compatibility but would pocket the surplus $1250-1750. Indeed this loyal Nikon owner thought long and hard about doing so, which speaks to the strategic importance of these cameras for a company trying to make inroads into a highly concentrated market.Ultimately, I opted to hang onto the two cameras I have (although this decision is one that I revisit time and time again) and continue to use them as I have for the past year. Let me give you a quick flavor of why.
The RX1 is smaller and more discrete
This is a small a point, but my gut reaction to the A7/r was: much smaller than the D800, not as small as the RX1. The EVF atop the A7/r and the larger profile of interchangeable mount lenses means that I would not be able to slip the A7/r into a pocket the way I can the RX1. Further, by virtue of using the EVF and its loud mechanical shutter, the A7/r just isn’t as stealthy as the RX1. Finally, f/2 beats the pants off of f/2.8 at the same or smaller size.At this point, some of you may be saying, “Future Sony releases will allow you to get a body without an EVF and get an f/2 lens that has a slimmer profile, etc, etc.” And that’s just the point: to oversimplify things, the reason I am keeping my RX1 is that Sony currently offers something close to an A7 body without a built-in EVF and with a slimmer profile 35mm f/2.
The D800 has important functional advantages
On the other side of the spectrum, the AF speed of the A7/r just isn’t going to match the D800, especially when the former is equipped with a Nikon lens and F-mount adapter. EVFs cannot yet match the experience of looking through the prism and the lens (I expect they will match soon, but aren’t there yet). What’s more, I have made such an investment in Nikon glass that I can’t yet justify purchasing an adapter for a Sony mount or selling them all for Sony’s offerings (many of which aren’t to market yet).Now, all of these are minor points and I think all of them disappear with an A8r, but they add up to something major: I have two cameras very well suited to two different types of shooting, and I ask myself if I gain or lose by getting something in between—something that wasn’t quite a pocket shooter and something that was quite a DSLR? You can imagine, however, that if I were coming to the market without a D800 and an RX1, that my decision would be far different: dollar for dollar, the A7/r would be a no-brainer.During the moments when I consider selling to grab an A7r, I keep coming back to a thought I had a month or so before the RX1 was announced. At that time I was considering something like the NEX cameras with a ZM 21mm f/2.8 and I said in my head, “I wish someone would make a carry-around camera with a full frame sensor and a fixed 35mm f/2.8 or f/2.” Now you understand how attractive the RX1 is to me and what a ridiculously high bar exists for another camera system to reach.
Okay, so what is different from the last review?
For one, I had an issue with the camera’s AF motor failing to engage and giving me an E61:00 error. I had to send it out to Sony for repairs (via extended warranty and service plan). I detailed my experience with Sony Service here [insert link] and I write to you as a very satisfied customer. That is to say, I have 3 years left on a 4 year + accidental damage warranty and I feel confident enough in that coverage to say that I will have this beauty in working order for at least another 3 years.For two, I’ve spent significantly less time thinking of this camera as a DSLR replacement and have instead started to develop a very different way of shooting with it. The activation barrier to taking a shot with my D800 is quite high. Beyond having to bring a large camera wherever you go and have it in hand, a proper camera takes two hands and full attention to produce an image. I shoot slowly and methodically and often from a tripod with the D800. In contrast, I can pull the RX1 out, pop off the lens cap, line up and take a shot with one hand (often with a toddler in the other). This fosters a totally different type of photography.
My “be-there” camera
The have-everywhere camera that gives DSLR type controls to one-handed shooting lets me pursue images that happen very quickly or images that might not normally meet the standards of “drag-the-DSLR-out-of-the-bag.” Many of those images you’ll see on this post. A full year of shooting and I can say this with great confidence: the RX1 is a terrific mash-up of point-and-shoot and DSLR not just in image quality and features, but primarily in the product it helps me create. To take this thinking a bit further: I find myself even processing images from the RX1 differently than I would from my DSLR. So much so that I have strongly considered starting a tumblr and posting JPEGs directly from the RX1 via my phone or an iPad rather than running the bulk of them through Lightroom, onto Flickr and then on the blog (really this is just a matter of time, stay tuned, and those readers who have experience with tumblr, cloud image storage and editing, etc, etc, please contact me, I want to pick your brain).Put simply, I capture more spontaneous and beautiful “moments” than I might have otherwise. Photography is very much an exercise in “f/8 and be there,” and the RX1 is my go-to “be there” camera.
The family camera
I mentioned earlier that I justified the purchase of the RX1 partly as a camera to be used to document the family moments into which a DSLR doesn’t neatly fit. Over the past year I’ve collected thousands and thousands of family images with the RX1. The cold hard truth is that many of those photos could be better if I’d taken a full DSLR kit with me to the park or the beach or the grocery store each time. The RX1 is a difficult camera to use on a toddler (or any moving subject for that matter); autofocus isn’t as fast as a professional DSLR, it’s difficult to perfectly compose via an LCD (especially in bright sunlight), but despite these shortcomings, it’s been an incredibly useful family camera. There are simply so many beautiful moments where I had the RX1 over my shoulder, ready to go that whatever difficulties exist relative to a DSLR, those pale in comparison to the power of it’s convenience. The best camera is the one in your hand.
Where to go from here.
So what is the value of these RX1 going forward, especially in a world of the A7/r and it’s yet-to-be-born siblings without an EVF and a pancake lens? Frankly, at its current price (which is quite fair when you consider the value of the the body and the lens) I see precious little room for an independent offering versus a mirrorless, interchangeable lens system with the same image quality in a package just as small. That doesn’t mean Sony won’t make an RX2 or an RX1 Mark II (have a look at it’s other product lines to see how many SKUs are maintained despite low demand). Instead, I see the RX1 as a bridge that needed to exist for engineers, managers, and the market to make it to the A7/r and it’s descendants.A Facebook friend recently paid me a great compliment; he said something like, “Justin, via your blog, you’ve sold a ton of RX1 cameras.” Indeed, despite my efforts not to be a salesman, I think he’s right: I have and would continue to recommend this camera.The true value of the RX1 going forward is for those of us who have the thing on our shoulders; and yes, if you have an investment in and a love for a DSLR system, there’s still tremendous value in getting one, slinging it over your shoulder, and heading out into the wide, bright world; A7/r or no, this is just an unbelievably capable camera.
A good thing continues
Some six months ago, I posted almost 100 images and a few thoughts I felt were missing from the many existing RX1 reviews. The outpouring of support and interest in that article was very gratifying. When I published, I had used the camera for six full months, enough time to come to a view of its strengths and weaknesses and to produce a small portfolio of good images, but not enough time to see the full picture (pun intended). In the following six months, I have used the camera at least as frequently as in the first six and have produced another small set of good images. It should be noted that my usage of the RX1 in the last six (and especially in the last 3) months has involved less travel and more time with the family and around the house; I will share relatively few of these images but will spend some time sharing my impressions of its functionality for family snapshots as I am sure there is some interest. And let it be said here: one of the primary motivations to purchase the camera was to take more photos with the family, and after one full year I can confidently say: money well spent.
The A7/r game-changer?
In the past six months, Sony have announced and released two full-frame, interchangeable lens cameras that clearly take design cues from the RX1: the A7 and the A7r. These cameras are innovative and highly capable and, as such, are in the midst of taking the photography world by storm. I think they are compelling enough cameras that I wonder whether Sony is wasting its energy continuing to develop further A-mount cameras. Sony deserve credit for a bold strategy—many companies would have been content to allow the success of the the RX1 (and RX1R) generate further sales before pushing further into the white space left unexplored by camera makers with less ambition.This is not the place to detail the relative advantages and disadvantages of the RX1 versus the A7/r except to make the following point. I currently use a Nikon D800 and an RX1: were I to sell both and purchase the A7r + 35mm f/2.8 I would in many ways lose nothing by way of imaging capability or lens compatibility but would pocket the surplus $1250-1750. Indeed this loyal Nikon owner thought long and hard about doing so, which speaks to the strategic importance of these cameras for a company trying to make inroads into a highly concentrated market.Ultimately, I opted to hang onto the two cameras I have (although this decision is one that I revisit time and time again) and continue to use them as I have for the past year. Let me give you a quick flavor of why.
The RX1 is smaller and more discrete
This is a small a point, but my gut reaction to the A7/r was: much smaller than the D800, not as small as the RX1. The EVF atop the A7/r and the larger profile of interchangeable mount lenses means that I would not be able to slip the A7/r into a pocket the way I can the RX1. Further, by virtue of using the EVF and its loud mechanical shutter, the A7/r just isn’t as stealthy as the RX1. Finally, f/2 beats the pants off of f/2.8 at the same or smaller size.At this point, some of you may be saying, “Future Sony releases will allow you to get a body without an EVF and get an f/2 lens that has a slimmer profile, etc, etc.” And that’s just the point: to oversimplify things, the reason I am keeping my RX1 is that Sony currently offers something close to an A7 body without a built-in EVF and with a slimmer profile 35mm f/2.
The D800 has important functional advantages
On the other side of the spectrum, the AF speed of the A7/r just isn’t going to match the D800, especially when the former is equipped with a Nikon lens and F-mount adapter. EVFs cannot yet match the experience of looking through the prism and the lens (I expect they will match soon, but aren’t there yet). What’s more, I have made such an investment in Nikon glass that I can’t yet justify purchasing an adapter for a Sony mount or selling them all for Sony’s offerings (many of which aren’t to market yet).Now, all of these are minor points and I think all of them disappear with an A8r, but they add up to something major: I have two cameras very well suited to two different types of shooting, and I ask myself if I gain or lose by getting something in between—something that wasn’t quite a pocket shooter and something that was quite a DSLR? You can imagine, however, that if I were coming to the market without a D800 and an RX1, that my decision would be far different: dollar for dollar, the A7/r would be a no-brainer.During the moments when I consider selling to grab an A7r, I keep coming back to a thought I had a month or so before the RX1 was announced. At that time I was considering something like the NEX cameras with a ZM 21mm f/2.8 and I said in my head, “I wish someone would make a carry-around camera with a full frame sensor and a fixed 35mm f/2.8 or f/2.” Now you understand how attractive the RX1 is to me and what a ridiculously high bar exists for another camera system to reach.
Okay, so what is different from the last review?
For one, I had an issue with the camera’s AF motor failing to engage and giving me an E61:00 error. I had to send it out to Sony for repairs (via extended warranty and service plan). I detailed my experience with Sony Service here [insert link] and I write to you as a very satisfied customer. That is to say, I have 3 years left on a 4 year + accidental damage warranty and I feel confident enough in that coverage to say that I will have this beauty in working order for at least another 3 years.For two, I’ve spent significantly less time thinking of this camera as a DSLR replacement and have instead started to develop a very different way of shooting with it. The activation barrier to taking a shot with my D800 is quite high. Beyond having to bring a large camera wherever you go and have it in hand, a proper camera takes two hands and full attention to produce an image. I shoot slowly and methodically and often from a tripod with the D800. In contrast, I can pull the RX1 out, pop off the lens cap, line up and take a shot with one hand (often with a toddler in the other). This fosters a totally different type of photography.
My “be-there” camera
The have-everywhere camera that gives DSLR type controls to one-handed shooting lets me pursue images that happen very quickly or images that might not normally meet the standards of “drag-the-DSLR-out-of-the-bag.” Many of those images you’ll see on this post. A full year of shooting and I can say this with great confidence: the RX1 is a terrific mash-up of point-and-shoot and DSLR not just in image quality and features, but primarily in the product it helps me create. To take this thinking a bit further: I find myself even processing images from the RX1 differently than I would from my DSLR. So much so that I have strongly considered starting a tumblr and posting JPEGs directly from the RX1 via my phone or an iPad rather than running the bulk of them through Lightroom, onto Flickr and then on the blog (really this is just a matter of time, stay tuned, and those readers who have experience with tumblr, cloud image storage and editing, etc, etc, please contact me, I want to pick your brain).Put simply, I capture more spontaneous and beautiful “moments” than I might have otherwise. Photography is very much an exercise in “f/8 and be there,” and the RX1 is my go-to “be there” camera.
The family camera
I mentioned earlier that I justified the purchase of the RX1 partly as a camera to be used to document the family moments into which a DSLR doesn’t neatly fit. Over the past year I’ve collected thousands and thousands of family images with the RX1. The cold hard truth is that many of those photos could be better if I’d taken a full DSLR kit with me to the park or the beach or the grocery store each time. The RX1 is a difficult camera to use on a toddler (or any moving subject for that matter); autofocus isn’t as fast as a professional DSLR, it’s difficult to perfectly compose via an LCD (especially in bright sunlight), but despite these shortcomings, it’s been an incredibly useful family camera. There are simply so many beautiful moments where I had the RX1 over my shoulder, ready to go that whatever difficulties exist relative to a DSLR, those pale in comparison to the power of it’s convenience. The best camera is the one in your hand.
Where to go from here.
So what is the value of these RX1 going forward, especially in a world of the A7/r and it’s yet-to-be-born siblings without an EVF and a pancake lens? Frankly, at its current price (which is quite fair when you consider the value of the the body and the lens) I see precious little room for an independent offering versus a mirrorless, interchangeable lens system with the same image quality in a package just as small. That doesn’t mean Sony won’t make an RX2 or an RX1 Mark II (have a look at it’s other product lines to see how many SKUs are maintained despite low demand). Instead, I see the RX1 as a bridge that needed to exist for engineers, managers, and the market to make it to the A7/r and it’s descendants.A Facebook friend recently paid me a great compliment; he said something like, “Justin, via your blog, you’ve sold a ton of RX1 cameras.” Indeed, despite my efforts not to be a salesman, I think he’s right: I have and would continue to recommend this camera.The true value of the RX1 going forward is for those of us who have the thing on our shoulders; and yes, if you have an investment in and a love for a DSLR system, there’s still tremendous value in getting one, slinging it over your shoulder, and heading out into the wide, bright world; A7/r or no, this is just an unbelievably capable camera.
A good thing continues
Some six months ago, I posted almost 100 images and a few thoughts I felt were missing from the many existing RX1 reviews. The outpouring of support and interest in that article was very gratifying. When I published, I had used the camera for six full months, enough time to come to a view of its strengths and weaknesses and to produce a small portfolio of good images, but not enough time to see the full picture (pun intended). In the following six months, I have used the camera at least as frequently as in the first six and have produced another small set of good images. It should be noted that my usage of the RX1 in the last six (and especially in the last 3) months has involved less travel and more time with the family and around the house; I will share relatively few of these images but will spend some time sharing my impressions of its functionality for family snapshots as I am sure there is some interest. And let it be said here: one of the primary motivations to purchase the camera was to take more photos with the family, and after one full year I can confidently say: money well spent.
The A7/r game-changer?
In the past six months, Sony have announced and released two full-frame, interchangeable lens cameras that clearly take design cues from the RX1: the A7 and the A7r. These cameras are innovative and highly capable and, as such, are in the midst of taking the photography world by storm. I think they are compelling enough cameras that I wonder whether Sony is wasting its energy continuing to develop further A-mount cameras. Sony deserve credit for a bold strategy—many companies would have been content to allow the success of the the RX1 (and RX1R) generate further sales before pushing further into the white space left unexplored by camera makers with less ambition.This is not the place to detail the relative advantages and disadvantages of the RX1 versus the A7/r except to make the following point. I currently use a Nikon D800 and an RX1: were I to sell both and purchase the A7r + 35mm f/2.8 I would in many ways lose nothing by way of imaging capability or lens compatibility but would pocket the surplus $1250-1750. Indeed this loyal Nikon owner thought long and hard about doing so, which speaks to the strategic importance of these cameras for a company trying to make inroads into a highly concentrated market.Ultimately, I opted to hang onto the two cameras I have (although this decision is one that I revisit time and time again) and continue to use them as I have for the past year. Let me give you a quick flavor of why.
The RX1 is smaller and more discrete
This is a small a point, but my gut reaction to the A7/r was: much smaller than the D800, not as small as the RX1. The EVF atop the A7/r and the larger profile of interchangeable mount lenses means that I would not be able to slip the A7/r into a pocket the way I can the RX1. Further, by virtue of using the EVF and its loud mechanical shutter, the A7/r just isn’t as stealthy as the RX1. Finally, f/2 beats the pants off of f/2.8 at the same or smaller size.At this point, some of you may be saying, “Future Sony releases will allow you to get a body without an EVF and get an f/2 lens that has a slimmer profile, etc, etc.” And that’s just the point: to oversimplify things, the reason I am keeping my RX1 is that Sony currently offers something close to an A7 body without a built-in EVF and with a slimmer profile 35mm f/2.
The D800 has important functional advantages
On the other side of the spectrum, the AF speed of the A7/r just isn’t going to match the D800, especially when the former is equipped with a Nikon lens and F-mount adapter. EVFs cannot yet match the experience of looking through the prism and the lens (I expect they will match soon, but aren’t there yet). What’s more, I have made such an investment in Nikon glass that I can’t yet justify purchasing an adapter for a Sony mount or selling them all for Sony’s offerings (many of which aren’t to market yet).Now, all of these are minor points and I think all of them disappear with an A8r, but they add up to something major: I have two cameras very well suited to two different types of shooting, and I ask myself if I gain or lose by getting something in between—something that wasn’t quite a pocket shooter and something that was quite a DSLR? You can imagine, however, that if I were coming to the market without a D800 and an RX1, that my decision would be far different: dollar for dollar, the A7/r would be a no-brainer.During the moments when I consider selling to grab an A7r, I keep coming back to a thought I had a month or so before the RX1 was announced. At that time I was considering something like the NEX cameras with a ZM 21mm f/2.8 and I said in my head, “I wish someone would make a carry-around camera with a full frame sensor and a fixed 35mm f/2.8 or f/2.” Now you understand how attractive the RX1 is to me and what a ridiculously high bar exists for another camera system to reach.
Okay, so what is different from the last review?
For one, I had an issue with the camera’s AF motor failing to engage and giving me an E61:00 error. I had to send it out to Sony for repairs (via extended warranty and service plan). I detailed my experience with Sony Service here [insert link] and I write to you as a very satisfied customer. That is to say, I have 3 years left on a 4 year + accidental damage warranty and I feel confident enough in that coverage to say that I will have this beauty in working order for at least another 3 years.For two, I’ve spent significantly less time thinking of this camera as a DSLR replacement and have instead started to develop a very different way of shooting with it. The activation barrier to taking a shot with my D800 is quite high. Beyond having to bring a large camera wherever you go and have it in hand, a proper camera takes two hands and full attention to produce an image. I shoot slowly and methodically and often from a tripod with the D800. In contrast, I can pull the RX1 out, pop off the lens cap, line up and take a shot with one hand (often with a toddler in the other). This fosters a totally different type of photography.
My “be-there” camera
The have-everywhere camera that gives DSLR type controls to one-handed shooting lets me pursue images that happen very quickly or images that might not normally meet the standards of “drag-the-DSLR-out-of-the-bag.” Many of those images you’ll see on this post. A full year of shooting and I can say this with great confidence: the RX1 is a terrific mash-up of point-and-shoot and DSLR not just in image quality and features, but primarily in the product it helps me create. To take this thinking a bit further: I find myself even processing images from the RX1 differently than I would from my DSLR. So much so that I have strongly considered starting a tumblr and posting JPEGs directly from the RX1 via my phone or an iPad rather than running the bulk of them through Lightroom, onto Flickr and then on the blog (really this is just a matter of time, stay tuned, and those readers who have experience with tumblr, cloud image storage and editing, etc, etc, please contact me, I want to pick your brain).Put simply, I capture more spontaneous and beautiful “moments” than I might have otherwise. Photography is very much an exercise in “f/8 and be there,” and the RX1 is my go-to “be there” camera.
The family camera
I mentioned earlier that I justified the purchase of the RX1 partly as a camera to be used to document the family moments into which a DSLR doesn’t neatly fit. Over the past year I’ve collected thousands and thousands of family images with the RX1. The cold hard truth is that many of those photos could be better if I’d taken a full DSLR kit with me to the park or the beach or the grocery store each time. The RX1 is a difficult camera to use on a toddler (or any moving subject for that matter); autofocus isn’t as fast as a professional DSLR, it’s difficult to perfectly compose via an LCD (especially in bright sunlight), but despite these shortcomings, it’s been an incredibly useful family camera. There are simply so many beautiful moments where I had the RX1 over my shoulder, ready to go that whatever difficulties exist relative to a DSLR, those pale in comparison to the power of it’s convenience. The best camera is the one in your hand.
Where to go from here.
So what is the value of these RX1 going forward, especially in a world of the A7/r and it’s yet-to-be-born siblings without an EVF and a pancake lens? Frankly, at its current price (which is quite fair when you consider the value of the the body and the lens) I see precious little room for an independent offering versus a mirrorless, interchangeable lens system with the same image quality in a package just as small. That doesn’t mean Sony won’t make an RX2 or an RX1 Mark II (have a look at it’s other product lines to see how many SKUs are maintained despite low demand). Instead, I see the RX1 as a bridge that needed to exist for engineers, managers, and the market to make it to the A7/r and it’s descendants.A Facebook friend recently paid me a great compliment; he said something like, “Justin, via your blog, you’ve sold a ton of RX1 cameras.” Indeed, despite my efforts not to be a salesman, I think he’s right: I have and would continue to recommend this camera.The true value of the RX1 going forward is for those of us who have the thing on our shoulders; and yes, if you have an investment in and a love for a DSLR system, there’s still tremendous value in getting one, slinging it over your shoulder, and heading out into the wide, bright world; A7/r or no, this is just an unbelievably capable camera.
The water buffalo or domestic Asian water buffalo (Bubalus bubalis) is a large bovid originating in South Asia, Southeast Asia, and China. Today, it is also found in Europe, Australia, and some American countries. The wild water buffalo (Bubalus arnee) native to Southeast Asia is considered a different species, but most likely represents the ancestor of the domestic water buffalo.
Two extant types of water buffalo are recognized based on morphological and behavioural criteria – the river buffalo of South Asia and further west to the Balkans, Egypt, and Italy, and the swamp buffalo, found from Assam in the west through Southeast Asia to the Yangtze valley of China in the east. The origins of the domestic water buffalo types are debated, although results of a phylogenetic study indicate that the swamp type may have originated in China and was domesticated about 4,000 years ago, while the river type may have originated from India and was domesticated about 5,000 years ago. Water buffalo were traded from the Indus Valley Civilisation to Mesopotamia, in modern Iraq, 2500 BC by the Meluhhas. The seal of a scribe employed by an Akkadian king shows the sacrifice of water buffalo.
At least 130 million domestic water buffalo exist, and more human beings depend on them than on any other domestic animal. They are especially suitable for tilling rice fields, and their milk is richer in fat and protein than that of dairy cattle. The large feral population of northern Australia became established in the late 19th century, and smaller feral herds are in New Guinea, Tunisia, and northeastern Argentina. Feral herds are also present in New Britain, New Ireland, Irian Jaya, Papua New Guinea, Colombia, Guyana, Suriname, Brazil, and Uruguay.
CHARACTERISTICS
The skin of river buffalo is black, but some specimens may have dark, slate-coloured skin. Swamp buffalo have a grey skin at birth, but become slate blue later. Albinoids are present in some populations. River buffalo have comparatively longer faces, smaller girths, and bigger limbs than swamp buffalo. Their dorsal ridges extend further back and taper off more gradually. Their horns grow downward and backward, then curve upward in a spiral. Swamp buffalo are heavy-bodied and stockily built; the body is short and the belly large. The forehead is flat, the eyes prominent, the face short, and the muzzle wide. The neck is comparatively long, and the withers and croup are prominent. A dorsal ridge extends backward and ends abruptly just before the end of the chest. Their horns grow outward, and curve in a semicircle, but always remain more or less on the plane of the forehead. The tail is short, reaching only to the hocks. Height at withers is 129–133 cm for males, and 120–127 cm for females. They range in weight from 300–550 kg, but weights of over 1,000 kg have also been observed.
Tedong bonga is a black pied buffalo featuring a unique black and white colouration that is favoured by the Toraja of Sulawesi.
The swamp buffalo has 48 chromosomes; the river buffalo has 50 chromosomes. The two types do not readily interbreed, but fertile offspring can occur. Buffalo-cattle hybrids have not been observed to occur, and the embryos of such hybrids do not reach maturity in laboratory experiments.
The rumen of the water buffalo has important differences from that of other ruminants. It contains a larger population of bacteria, particularly the cellulolytic bacteria, lower protozoa, and higher fungi zoospores. In addition, higher rumen ammonia nitrogen (NH4-N) and higher pH have been found as compared to those in cattle
ECOLOGY AND BEHAVIOR
River buffalo prefer deep water. Swamp buffalo prefer to wallow in mudholes which they make with their horns. During wallowing, they acquire a thick coating of mud. Both are well adapted to a hot and humid climate with temperatures ranging from 0 °C in the winter to 30 °C and greater in the summer. Water availability is important in hot climates, since they need wallows, rivers, or splashing water to assist in thermoregulation. Some breeds are adapted to saline seaside shores and saline sandy terrain.
DIET
Water buffalo thrive on many aquatic plants and during floods, will graze submerged, raising their heads above the water and carrying quantities of edible plants. They eat reeds (quassab), a giant reed (birdi), a kind of bulrush (kaulan), water hyacinth, and marsh grasses. Some of these plants are of great value to local peoples. Others, such as water hyacinth, are a major problem in some tropical valleys, and water buffalo may help to keep waterways clear.
Green fodders are used widely for intensive milk production and for fattening. Many fodder crops are conserved as hay, chaffed, or pulped. Fodders include alfalfa, berseem and bancheri, the leaves, stems or trimmings of banana, cassava, fodder beet, halfa, ipil-ipil and kenaf, maize, oats, pandarus, peanut, sorghum, soybean, sugarcane, bagasse, and turnips. Citrus pulp and pineapple wastes have been fed safely to buffalo. In Egypt, whole sun-dried dates are fed to milk-buffalo up to 25% of the standard feed mixture.
REPRODUCTION
Swamp buffalo generally become reproductive at an older age than river breeds. Young males in Egypt, India, and Pakistan are first mated at about 3.0–3.5 years of age, but in Italy
they may be used as early as 2 years of age. Successful mating behaviour may continue until the animal is 12 years or even older. A good river male can impregnate 100 females in a year. A strong seasonal influence on mating occurs. Heat stress reduces libido
Although buffalo are polyoestrous, their reproductive efficiency shows wide variation throughout the year. Buffalo cows exhibit a distinct seasonal change in displaying oestrus, conception rate, and calving rate. The age at first oestrus of heifers varies between breeds from 13–33 months, but mating at the first oestrus is often infertile and usually deferred until they are 3 years old. Gestation lasts from 281–334 days, but most reports give a range between 300 and 320 days. Swamp buffalo carry their calves for one or two weeks longer than river buffalo. It is not rare to find buffalo that continue to work well at the age of 30, and instances of a working life of 40 years are recorded.
TAXONOMIC HISTORY
Carl Linnaeus first described the genus Bos and the water buffalo under the binomial Bubalis bubalus in 1758; the latter was known to occur in Asia and as a domestic form in Italy. Ellerman and Morrison-Scott treated the wild and domestic forms of the water buffalo as conspecifics whereas others treated them as different species. The nomenclatorial treatment of wild and domestic forms has been inconsistent and varies between authors and even within the works of single authors.
In March 2003, the International Commission on Zoological Nomenclature achieved consistency in the naming of wild and domestic water buffalo by ruling that the scientific name Bubalus arnee is valid for the wild form. B. bubalis continues to be valid for the domestic form and applies also to feral populations.
DOMESTICATION AND BREEDING
Water buffalo were domesticated in India about 5000 years ago, and in China about 4000 years ago. Two types are recognized, based on morphological and behavioural criteria – the river buffalo of the Indian subcontinent and further west to the Balkans and Italy, and the swamp buffalo, found from Assam in the west through Southeast Asia to the Yangtze valley of China in the east. The present-day river buffalo is the result of complex domestication processes involving more than one maternal lineage and a significant maternal gene flow from wild populations after the initial domestication events. Twenty-two breeds of the river type water buffalo are known, including Murrah, Nili-Ravi, Surti, Jafarabadi, Anatolian, Mediterranean, and Egyptian buffalo. China has a huge variety of buffalo genetic resources, comprising 16 local swamp buffalo breeds in various regions.
Results of mitochondrial DNA analyses indicate that the two types were domesticated independently. Sequencing of cytochrome b genes of Bubalus species implies that the domestic buffalo originated from at least two populations, and that the river and the swamp types have differentiated at the full species level. The genetic distance between the two types is so large that a divergence time of about 1.7 million years has been suggested. The swamp type was noticed to have the closest relationship with the tamaraw.
DISTRIBUTION OF POPULATIONS
The water buffalo population in the world is about 172 million.
IN ASIA
More than 95.8% of the world population of water buffalo are found in Asia including both river and swamp types. The water buffalo population in India numbered over 97.9 million head in 2003, representing 56.5% of the world population. They are primarily of the river type, with 10 well-defined breeds comprising Badhawari, Murrah, Nili-Ravi, Jafarabadi, Marathwada, Mehsana, Nagpuri, Pandharpuri, Toda, and Surti. Swamp buffalo occur only in small areas in the north-eastern part of the country and are not distinguished into breeds.
In 2003, the second-largest population lived in China, with 22.759 million head, all of the swamp type with breeds kept only in the lowlands, and other breeds kept only in the mountains; as of 2003, 3.2 million swamp-type carabao buffalo were in the Philippines, nearly three million swamp buffalo were in Vietnam, and 772,764 buffalo were in Bangladesh. About 750,000 head were estimated in Sri Lanka in 1997.
The water buffalo is the main dairy animal in Pakistan, with 23.47 million head in 2010. Of these, 76% are kept in the Punjab. The rest of them are mostly in the province of Sindh. Breeds used are Nili-Ravi, Kundi, and Azi Kheli. Karachi has the largest population of water buffalos for an area where fodder is not grown, consisting of 350,000 head kept mainly for milking.
In Thailand, the number of water buffalo dropped from more than 3 million head in 1996 to less than 1.24 million head in 2011. Slightly over 75% of them are kept in the country's northeastern region. The statistics also indicate that by the beginning of 2012, less than one million were in the country, partly as a result of illegal shipments to neighboring countries where sales prices are higher than in Thailand.
Water buffalo are also present in the southern region of Iraq, in the marshes. These marshes were drained by Saddam Hussein in 1991 in an attempt to punish the south for the uprisings of 1991. Following 2003, and the fall of the Saddam regime, these lands were reflooded and a 2007 report in the provinces of Maysan and Thi Qar shows a steady increase in the number of water buffalo. The report puts the number at 40,008 head in those two provinces.
IN EUROPE AND THE MEDITERRANEAN
Water buffalo likely were introduced to Europe from India or other Oriental countries. To Italy they were introduced about the year 600 in the reign of the Longobard King Agilulf. As they appear in the company of wild horses, they probably were a present from the Khan of the Avars, a Turkic nomadic tribe that dwelt near the Danube River at the time. Sir H. Johnston knew of a herd of water buffalo presented by a King of Naples to the Bey of Tunis in the mid-19th century that had resumed the feral state in northern Tunis.
European buffalo are all of the river type and considered to be of the same breed named Mediterranean buffalo. In Italy, the Mediterranean type was particularly selected and is called Mediterranean Italian breed to distinguish it from other European breeds, which differ genetically. Mediterranean buffalo are also found in Romania, Bulgaria, Greece, Albania, Kosovo, and the Republic of Macedonia, with a few hundred in the United Kingdom, Germany, the Netherlands, Switzerland, and Hungary. Little exchange of breeding buffalo has occurred among countries, so each population has its own phenotypic features and performances. In Bulgaria, they were crossbred with the Indian Murrah breed, and in Romania, some were crossbred with Bulgarian Murrah. Populations in Turkey are of the Anatolian buffalo breed.
IN AUSTRALIA
Between 1824 and 1849, water buffalo were introduced into the Northern Territory from Timor, Kisar, and probably other islands in the Indonesian archipelago. In 1886, a few milking types were brought from India to Darwin. They have been the main grazing animals on the subcoastal plains and river basins between Darwin and Arnhem Land since the 1880s. In the early 1960s, an estimated population of 150,000 to 200,000 buffalo were living in the plains and nearby areas.
They became feral and are causing significant environmental damage. Buffalo are also found in the Top End. As a result, they were hunted in the Top End from 1885 until 1980. The commencement of the brucellosis and tuberculosis campaign (BTEC) resulted in a huge culling program to reduce buffalo herds to a fraction of the numbers that were reached in the 1980s. The BTEC was finished when the Northern Territory was declared free of the disease in 1997. Numbers dropped dramatically as a result of the campaign, but have since recovered to an estimated 150,000 animals across northern Australia in 2008.
During the 1950s, buffalo were hunted for their skins and meat, which was exported and used in the local trade. In the late 1970s, live exports were made to Cuba and continued later into other countries. Buffalo are now crossed with riverine buffalo in artificial insemination programs, and may be found in many areas of Australia. Some of these crossbreds are used for milk production. Melville Island is a popular hunting location, where a steady population up to 4,000 individuals exists. Safari outfits are run from Darwin to Melville Island and other locations in the Top End, often with the use of bush pilots. The horns, which can measure up to a record of 3.1 m tip-to-tip, are prized hunting trophies.
The buffalo have developed a different appearance from the Indonesian buffalo from which they descend. They live mainly in freshwater marshes and billabongs, and their territory range can be quite expansive during the wet season. Their only natural predators in Australia are adult saltwater crocodiles, with whom they share the billabongs, and dingoes, which have been known to prey on buffalo calves and occasionally adult buffalo when the dingoes are in large packs.
Buffalo were exported live to Indonesia until 2011, at a rate of about 3000 per year. After the live export ban that year, the exports dropped to zero, and had not resumed as of June 2013.
IN SOUTH AMERICA
Water buffalo were introduced into the Amazon River basin in 1895. They are now extensively used there for meat and dairy production. In 2005, the buffalo herd in the Brazilian Amazon stood at roughly 1.6 million head, of which 460,000 were located in the lower Amazon floodplain. Breeds used include Mediterranean from Italy, Murrah and Jafarabadi from India, and Carabao from the Philippines.
During the 1970s, small herds were imported to Costa Rica, Ecuador, Cayenne, Panama, Surinam, Guyana, and Venezuela.
In Argentina, many game ranches raise water buffalo for commercial hunting
IN NORTH AMERICA
In 1974, four water buffalo were imported to the United States from Guam to be studied at the University of Florida. In February 1978, the first herd arrived for commercial farming. Until 2002, only one commercial breeder was in the United States. Water buffalo meat is imported from Australia. Until 2011, water buffalo were raised in Gainesville, Florida, from young obtained from zoo overflow. They were used primarily for meat production, frequently sold as hamburger.[38] Other US ranchers use them for production of high-quality mozzarella cheese.
HUSBANDRY
The husbandry system of water buffalo depends on the purpose for which they are bred and maintained. Most of them are kept by people who work on small farms in family units. Their buffalo live in very close association with them, and are often their greatest capital asset. The women and girls in India generally look after the milking buffalo while the men and boys are concerned with the working animals. Throughout Asia, they are commonly tended by children who are often seen leading or riding their charges to wallowing places. Water buffalo are the ideal animals for work in the deep mud of paddy fields because of their large hooves and flexible foot joints. They are often referred to as "the living tractor of the East". It probably is possible to plough deeper with buffalo than with either oxen or horses. They are the most efficient and economical means of cultivation of small fields. In most rice-producing countries, they are used for threshing and for transporting the sheaves during the rice harvest. They provide power for oilseed mills, sugarcane presses, and devices for raising water. They are widely used as pack animals, and in India and Pakistan also for heavy haulage. In their invasions of Europe, the Turks used buffalo for hauling heavy battering rams. Their dung is used as a fertilizer, and as a fuel when dried.
Buffalo contribute 72 million tones of milk and three million tones of meat annually to world food, much of it in areas that are prone to nutritional imbalances. In India, river-type buffalo are kept mainly for milk production and for transport, whereas swamp-type buffalo are kept mainly for work and a small amount of milk.
DAIRY PRODUCTS
Water buffalo milk presents physicochemical features different from that of other ruminant species, such as a higher content of fatty acids and proteins. The physical and chemical parameters of swamp and river type water buffalo milk differ. Water buffalo milk contains higher levels of total solids, crude protein, fat, calcium, and phosphorus, and slightly higher content of lactose compared with those of cow milk. The high level of total solids makes water buffalo milk ideal for processing into value-added dairy products such as cheese. The conjugated linoleic acid (CLA) content in milk ranged from 4.4 mg/g fat in September to 7.6 mg/g fat in June. Seasons and genetics may play a role in variation of CLA level and changes in gross composition of the water buffalo milk.
Water buffalo milk is processed into a large variety of dairy products:
- Cream churns much faster at higher fat levels and gives higher overrun than cow cream.
- Butter from water buffalo cream displays more stability than that from cow cream.
- Ghee from water buffalo milk has a different texture with a bigger grain size than ghee from cow milk.
- Heat-concentrated milk products in the Indian subcontinent include paneer, khoa, rabri, kheer and basundi.
- Fermented milk products include dahi, yogurt, and chakka.
- Whey is used for making ricotta and mascarpone in Italy, and alkarish in Syria and Egypt.
- Soft cheeses made include mozzarella in Italy, karish, mish, and domiati in Egypt, madhfor in Iraq, alghab in Syria, kesong puti in the Philippines, and vladeasa in Romania.
- The semihard cheese beyaz peynir is made in Turkey.
- Hard cheeses include braila in Romania, rahss in Egypt, white brine in Bulgaria, and akkawi in Syria.
- Watered-down buffalo milk is used as a cheaper alternative to regular milk.
MEAT AND SKIN PRODUCTS
Water buffalo meat, sometimes called "carabeef", is often passed off as beef in certain regions, and is also a major source of export revenue for India. In many Asian regions, buffalo meat is less preferred due to its toughness; however, recipes have evolved (rendang, for example) where the slow cooking process and spices not only make the meat palatable, but also preserve it, an important factor in hot climates where refrigeration is not always available.Their hides provide tough and useful leather, often used for shoes.
BONE AND HORN PRODUCTS
The bones and horns are often made into jewellery, especially earrings. Horns are used for the embouchure of musical instruments, such as ney and kaval.
ENVIRONMENTAL EFFECTS
Wildlife conservation scientists have started to recommend and use introduced populations of feral domestic water buffalo in far-away lands to manage uncontrolled vegetation growth in and around natural wetlands. Introduced water buffalo at home in such environs provide cheap service by regularly grazing the uncontrolled vegetation and opening up clogged water bodies for waterfowl, wetland birds, and other wildlife. Grazing water buffalo are sometimes used in Great Britain for conservation grazing, such as in Chippenham Fen National Nature Reserve. The buffalo can better adapt to wet conditions and poor-quality vegetation than cattle.
Currently, research is being conducted at the Lyle Center for Regenerative Studies to determine the levels of nutrients removed and returned to wetlands when water buffalo are used for wetland vegetation management.
However, in uncontrolled circumstances, water buffalo can cause environmental damage, such as trampling vegetation, disturbing bird and reptile nesting sites, and spreading exotic weeds.
RESEARCH
The world's first cloned buffalo was developed by Indian scientists from National Dairy Research Institute, Karnal. The buffalo calf was named Samrupa. The calf did not survive more than a week, and died due to some genetic disorders. So, the scientists created another cloned buffalo a few months later, and named it Garima.
On 15 September 2007, the Philippines announced its development of Southeast Asia's first cloned buffalo. The Philippine Council for Agriculture, Forestry and Natural Resources Research and Development (PCARRD), under the Department of Science and Technology in Los Baños, Laguna, approved this project. The Department of Agriculture's Philippine Carabao Center (PCC) will implement cloning through somatic cell nuclear transfer as a tool for genetic improvement in water buffalo. "Super buffalo calves" will be produced. There will be no modification or alteration of the genetic materials, as in genetically modified organisms.
On 1 January 2008, the Philippine Carabao Center in Nueva Ecija, per Filipino scientists, initiated a study to breed a super water buffalo that could produce 4 to 18 litres of milk per day using gene-based technology. Also, the first in vitro river buffalo was born there in 2004 from an in vitro-produced, vitrified embryo, named "Glory" after President Gloria Macapagal-Arroyo. Joseph Estrada's most successful project as an opposition senator, the PCC was created through Republic Act 3707, the Carabao Act of 1992.
IN CULTURE
Some ethnic groups, such as Batak and Toraja in Indonesia and the Derung in China, use water buffalo or kerbau (called horbo in Batak or tedong in Toraja) as sacrificial animals at several festivals.
- Legend has it that the Chinese philosophical sage Laozi left China through the Han Gu Pass riding a water buffalo.
- According to Hindu lore, the god of death Yama, rides on a male water buffalo.
- The carabao subspecies is considered a national symbol in the Philippines.
- In Vietnam, water buffalo are often the most valuable possession of poor farmers: "Con trâu là đầu cơ nghiệp". They are treated as a member of the family: "Chồng cày, vợ cấy, con trâu đi bừa" ("The husband ploughs, the wife sows, water buffalo draws the rake") and are friends of the children. Children talk to their water buffalo, "Bao giờ cây lúa còn bông. Thì còn ngọn cỏ ngoài đồng trâu ăn." (Vietnamese children are responsible for grazing water buffalo. They feed them grass if they work laboriously for men.) In the old days, West Lake, Hà Nội, was named Kim Ngưu - Golden Water Buffalo.
- The Yoruban Orisha Oya (goddess of change) takes the form of a water buffalo.
FIGHTING FESTIVALS
- Pasungay Festival is held annually in the town of San Joaquin, Iloilo in the Philippines.
- Moh juj Water Buffalo fighting, is held every year in Bhogali Bihu in Assam. Ahotguri in Nagaon is famous for it.
- Do Son Water Buffalo Fighting Festival of Vietnam, held each year on the ninth day of the eighth month of the lunar calendar at Do Son Township, Haiphong City in Vietnam, is one of the most popular Vietnam festivals and events in Haiphong City. The preparations for this buffalo fighting festival begin from the two to three months earlier. The competing buffalo are selected and methodically trained months in advance. It is a traditional festival of Vietnam attached to a Water God worshipping ceremony and the Hien Sinh custom to show martial spirit of the local people of Do Son, Haiphong.
- "Hai Luu" Water Buffalo Fighting Festival of Vietnam, According to ancient records, the buffalo fighting in Hai Luu Commune has existed from the 2nd century B.C. General Lu Gia at that time, had the buffalo slaughtered to give a feast to the local people and the warriors, and organized buffalo fighting for amusement. Eventually, all the fighting buffalo will be slaughtered as tributes to the deities.
- "Ko Samui" Water Buffalo Fighting Festival of Thailand, is a very popular event held on special occasions such as New Year's Day in January, and Songkran in mid-April, this festival features head-wrestling bouts in which two male Asian water buffalo are pitted against one another. Unlike in Spanish Bullfighting, wherein bulls get killed while fighting sword-wielding men, Buffalo Fighting Festival held at Ko Samui, Thailand is fairly harmless contest. The fighting season varies according to ancient customs & ceremonies. The first Buffalo to turn and run away is considered the loser, the winning buffalo becomes worth several million baht. Ko Samui is an island in the Gulf of Thailand in the South China Sea, it is 700 km from Bangkok and is connected to it by regular flights.
- "Ma'Pasilaga Tedong" Water Buffalo Fighting Festival, in Tana Toraja Regency of Sulawesi Island, Indonesia, is a very popular event where the Rambu Solo' or a Burial Festival took place in Tana Toraja.
RACING FESTIVALS
Carabao Carroza Festival is being held annually every May in the town of Pavia, Iloilo, Philippines.
Kambala races of Karnataka, India, take place between December and March. The races are conducted by having the water buffalo (he buffalo) run in long parallel slushy ditches, where they are driven by men standing on wooden planks drawn by the buffalo. The objectives of the race are to finish first and to raise the water to the greatest height and also a rural sport. Kambala races are arranged with competition, as well as without competition and as a part of thanks giving (to god) in about 50 villages of coastal Karnataka.
In the Chonburi Province of Thailand, and in Pakistan, there are annual water buffalo races.
Chon Buri Water buffalo racing festival, Thailand In downtown Chonburi, 70 km south of Bangkok, at the annual water buffalo festival held in mid-October. About 300 buffalo race in groups of five or six, spurred on by bareback jockeys wielding wooden sticks, as hundreds of spectators cheer. The water buffalo has always played an important role in agriculture in Thailand. For farmers of Chon Buri Province, near Bangkok, it is an important annual festival, beginning in mid-October. It is also a celebration among rice farmers before the rice harvest. At dawn, farmers walk their buffalo through surrounding rice fields, splashing them with water to keep them cool before leading them to the race field. This amazing festival started over a hundred years ago when two men arguing about whose buffalo was the fastest ended up having a race between them. That’s how it became a tradition and gradually a social event for farmers who gathered from around the country in Chonburi to trade their goods. The festival also helps a great deal in preserving the number of buffalo, which have been dwindling at quite an alarming rate in other regions. Modern machinery is rapidly replacing buffalo in Thai agriculture. With most of the farm work mechanized, the buffalo-racing tradition has continued. Racing buffalo are now raised just to race; they do not work at all. The few farm buffalo which still do work are much bigger than the racers because of the strenuous work they perform. Farm buffalo are in the "Buffalo Beauty Pageant", a Miss Farmer beauty contest and a comic buffalo costume contest etc.. This festival perfectly exemplifies a favored Thai attitude to life — "sanuk," meaning fun.
Babulang Water buffalo racing festival, Sarawak, Malaysia, is the largest or grandest of the many rituals, ceremonies and festivals of the traditional Bisaya (Borneo) community of Limbang, Sarawak. Highlights are the Ratu Babulang competition and the Water buffalo races which can only be found in this town in Sarawak, Malaysia.
Vihear Suor village Water buffalo racing festival, in Cambodia, each year, people visit Buddhist temples across the country to honor their deceased loved ones during a 15-day period commonly known as the Festival of the Dead but in Vihear Suor village, about 35 km northeast of Cambodia, citizens each year wrap up the festival with a water buffalo race to entertain visitors and honour a pledge made hundreds of years ago. There was a time when many village cattle which provide rural Cambodians with muscle power to plough their fields and transport agricultural products died from an unknown disease. The villagers prayed to a spirit to help save their animals from the disease and promised to show their gratitude by holding a buffalo race each year on the last day of "P'chum Ben" festival as it is known in Cambodian. The race draws hundreds of spectators who come to see riders and their animals charge down the racing field, the racers bouncing up and down on the backs of their buffalo, whose horns were draped with colorful cloth.
Pothu puttu matsaram, Kerala, South India, is similar to Kambala races.
WIKIPEDIA
A good thing continues
Some six months ago, I posted almost 100 images and a few thoughts I felt were missing from the many existing RX1 reviews. The outpouring of support and interest in that article was very gratifying. When I published, I had used the camera for six full months, enough time to come to a view of its strengths and weaknesses and to produce a small portfolio of good images, but not enough time to see the full picture (pun intended). In the following six months, I have used the camera at least as frequently as in the first six and have produced another small set of good images. It should be noted that my usage of the RX1 in the last six (and especially in the last 3) months has involved less travel and more time with the family and around the house; I will share relatively few of these images but will spend some time sharing my impressions of its functionality for family snapshots as I am sure there is some interest. And let it be said here: one of the primary motivations to purchase the camera was to take more photos with the family, and after one full year I can confidently say: money well spent.
The A7/r game-changer?
In the past six months, Sony have announced and released two full-frame, interchangeable lens cameras that clearly take design cues from the RX1: the A7 and the A7r. These cameras are innovative and highly capable and, as such, are in the midst of taking the photography world by storm. I think they are compelling enough cameras that I wonder whether Sony is wasting its energy continuing to develop further A-mount cameras. Sony deserve credit for a bold strategy—many companies would have been content to allow the success of the the RX1 (and RX1R) generate further sales before pushing further into the white space left unexplored by camera makers with less ambition.This is not the place to detail the relative advantages and disadvantages of the RX1 versus the A7/r except to make the following point. I currently use a Nikon D800 and an RX1: were I to sell both and purchase the A7r + 35mm f/2.8 I would in many ways lose nothing by way of imaging capability or lens compatibility but would pocket the surplus $1250-1750. Indeed this loyal Nikon owner thought long and hard about doing so, which speaks to the strategic importance of these cameras for a company trying to make inroads into a highly concentrated market.Ultimately, I opted to hang onto the two cameras I have (although this decision is one that I revisit time and time again) and continue to use them as I have for the past year. Let me give you a quick flavor of why.
The RX1 is smaller and more discrete
This is a small a point, but my gut reaction to the A7/r was: much smaller than the D800, not as small as the RX1. The EVF atop the A7/r and the larger profile of interchangeable mount lenses means that I would not be able to slip the A7/r into a pocket the way I can the RX1. Further, by virtue of using the EVF and its loud mechanical shutter, the A7/r just isn’t as stealthy as the RX1. Finally, f/2 beats the pants off of f/2.8 at the same or smaller size.At this point, some of you may be saying, “Future Sony releases will allow you to get a body without an EVF and get an f/2 lens that has a slimmer profile, etc, etc.” And that’s just the point: to oversimplify things, the reason I am keeping my RX1 is that Sony currently offers something close to an A7 body without a built-in EVF and with a slimmer profile 35mm f/2.
The D800 has important functional advantages
On the other side of the spectrum, the AF speed of the A7/r just isn’t going to match the D800, especially when the former is equipped with a Nikon lens and F-mount adapter. EVFs cannot yet match the experience of looking through the prism and the lens (I expect they will match soon, but aren’t there yet). What’s more, I have made such an investment in Nikon glass that I can’t yet justify purchasing an adapter for a Sony mount or selling them all for Sony’s offerings (many of which aren’t to market yet).Now, all of these are minor points and I think all of them disappear with an A8r, but they add up to something major: I have two cameras very well suited to two different types of shooting, and I ask myself if I gain or lose by getting something in between—something that wasn’t quite a pocket shooter and something that was quite a DSLR? You can imagine, however, that if I were coming to the market without a D800 and an RX1, that my decision would be far different: dollar for dollar, the A7/r would be a no-brainer.During the moments when I consider selling to grab an A7r, I keep coming back to a thought I had a month or so before the RX1 was announced. At that time I was considering something like the NEX cameras with a ZM 21mm f/2.8 and I said in my head, “I wish someone would make a carry-around camera with a full frame sensor and a fixed 35mm f/2.8 or f/2.” Now you understand how attractive the RX1 is to me and what a ridiculously high bar exists for another camera system to reach.
Okay, so what is different from the last review?
For one, I had an issue with the camera’s AF motor failing to engage and giving me an E61:00 error. I had to send it out to Sony for repairs (via extended warranty and service plan). I detailed my experience with Sony Service here [insert link] and I write to you as a very satisfied customer. That is to say, I have 3 years left on a 4 year + accidental damage warranty and I feel confident enough in that coverage to say that I will have this beauty in working order for at least another 3 years.For two, I’ve spent significantly less time thinking of this camera as a DSLR replacement and have instead started to develop a very different way of shooting with it. The activation barrier to taking a shot with my D800 is quite high. Beyond having to bring a large camera wherever you go and have it in hand, a proper camera takes two hands and full attention to produce an image. I shoot slowly and methodically and often from a tripod with the D800. In contrast, I can pull the RX1 out, pop off the lens cap, line up and take a shot with one hand (often with a toddler in the other). This fosters a totally different type of photography.
My “be-there” camera
The have-everywhere camera that gives DSLR type controls to one-handed shooting lets me pursue images that happen very quickly or images that might not normally meet the standards of “drag-the-DSLR-out-of-the-bag.” Many of those images you’ll see on this post. A full year of shooting and I can say this with great confidence: the RX1 is a terrific mash-up of point-and-shoot and DSLR not just in image quality and features, but primarily in the product it helps me create. To take this thinking a bit further: I find myself even processing images from the RX1 differently than I would from my DSLR. So much so that I have strongly considered starting a tumblr and posting JPEGs directly from the RX1 via my phone or an iPad rather than running the bulk of them through Lightroom, onto Flickr and then on the blog (really this is just a matter of time, stay tuned, and those readers who have experience with tumblr, cloud image storage and editing, etc, etc, please contact me, I want to pick your brain).Put simply, I capture more spontaneous and beautiful “moments” than I might have otherwise. Photography is very much an exercise in “f/8 and be there,” and the RX1 is my go-to “be there” camera.
The family camera
I mentioned earlier that I justified the purchase of the RX1 partly as a camera to be used to document the family moments into which a DSLR doesn’t neatly fit. Over the past year I’ve collected thousands and thousands of family images with the RX1. The cold hard truth is that many of those photos could be better if I’d taken a full DSLR kit with me to the park or the beach or the grocery store each time. The RX1 is a difficult camera to use on a toddler (or any moving subject for that matter); autofocus isn’t as fast as a professional DSLR, it’s difficult to perfectly compose via an LCD (especially in bright sunlight), but despite these shortcomings, it’s been an incredibly useful family camera. There are simply so many beautiful moments where I had the RX1 over my shoulder, ready to go that whatever difficulties exist relative to a DSLR, those pale in comparison to the power of it’s convenience. The best camera is the one in your hand.
Where to go from here.
So what is the value of these RX1 going forward, especially in a world of the A7/r and it’s yet-to-be-born siblings without an EVF and a pancake lens? Frankly, at its current price (which is quite fair when you consider the value of the the body and the lens) I see precious little room for an independent offering versus a mirrorless, interchangeable lens system with the same image quality in a package just as small. That doesn’t mean Sony won’t make an RX2 or an RX1 Mark II (have a look at it’s other product lines to see how many SKUs are maintained despite low demand). Instead, I see the RX1 as a bridge that needed to exist for engineers, managers, and the market to make it to the A7/r and it’s descendants.A Facebook friend recently paid me a great compliment; he said something like, “Justin, via your blog, you’ve sold a ton of RX1 cameras.” Indeed, despite my efforts not to be a salesman, I think he’s right: I have and would continue to recommend this camera.The true value of the RX1 going forward is for those of us who have the thing on our shoulders; and yes, if you have an investment in and a love for a DSLR system, there’s still tremendous value in getting one, slinging it over your shoulder, and heading out into the wide, bright world; A7/r or no, this is just an unbelievably capable camera.
A good thing continues
Some six months ago, I posted almost 100 images and a few thoughts I felt were missing from the many existing RX1 reviews. The outpouring of support and interest in that article was very gratifying. When I published, I had used the camera for six full months, enough time to come to a view of its strengths and weaknesses and to produce a small portfolio of good images, but not enough time to see the full picture (pun intended). In the following six months, I have used the camera at least as frequently as in the first six and have produced another small set of good images. It should be noted that my usage of the RX1 in the last six (and especially in the last 3) months has involved less travel and more time with the family and around the house; I will share relatively few of these images but will spend some time sharing my impressions of its functionality for family snapshots as I am sure there is some interest. And let it be said here: one of the primary motivations to purchase the camera was to take more photos with the family, and after one full year I can confidently say: money well spent.
The A7/r game-changer?
In the past six months, Sony have announced and released two full-frame, interchangeable lens cameras that clearly take design cues from the RX1: the A7 and the A7r. These cameras are innovative and highly capable and, as such, are in the midst of taking the photography world by storm. I think they are compelling enough cameras that I wonder whether Sony is wasting its energy continuing to develop further A-mount cameras. Sony deserve credit for a bold strategy—many companies would have been content to allow the success of the the RX1 (and RX1R) generate further sales before pushing further into the white space left unexplored by camera makers with less ambition.This is not the place to detail the relative advantages and disadvantages of the RX1 versus the A7/r except to make the following point. I currently use a Nikon D800 and an RX1: were I to sell both and purchase the A7r + 35mm f/2.8 I would in many ways lose nothing by way of imaging capability or lens compatibility but would pocket the surplus $1250-1750. Indeed this loyal Nikon owner thought long and hard about doing so, which speaks to the strategic importance of these cameras for a company trying to make inroads into a highly concentrated market.Ultimately, I opted to hang onto the two cameras I have (although this decision is one that I revisit time and time again) and continue to use them as I have for the past year. Let me give you a quick flavor of why.
The RX1 is smaller and more discrete
This is a small a point, but my gut reaction to the A7/r was: much smaller than the D800, not as small as the RX1. The EVF atop the A7/r and the larger profile of interchangeable mount lenses means that I would not be able to slip the A7/r into a pocket the way I can the RX1. Further, by virtue of using the EVF and its loud mechanical shutter, the A7/r just isn’t as stealthy as the RX1. Finally, f/2 beats the pants off of f/2.8 at the same or smaller size.At this point, some of you may be saying, “Future Sony releases will allow you to get a body without an EVF and get an f/2 lens that has a slimmer profile, etc, etc.” And that’s just the point: to oversimplify things, the reason I am keeping my RX1 is that Sony currently offers something close to an A7 body without a built-in EVF and with a slimmer profile 35mm f/2.
The D800 has important functional advantages
On the other side of the spectrum, the AF speed of the A7/r just isn’t going to match the D800, especially when the former is equipped with a Nikon lens and F-mount adapter. EVFs cannot yet match the experience of looking through the prism and the lens (I expect they will match soon, but aren’t there yet). What’s more, I have made such an investment in Nikon glass that I can’t yet justify purchasing an adapter for a Sony mount or selling them all for Sony’s offerings (many of which aren’t to market yet).Now, all of these are minor points and I think all of them disappear with an A8r, but they add up to something major: I have two cameras very well suited to two different types of shooting, and I ask myself if I gain or lose by getting something in between—something that wasn’t quite a pocket shooter and something that was quite a DSLR? You can imagine, however, that if I were coming to the market without a D800 and an RX1, that my decision would be far different: dollar for dollar, the A7/r would be a no-brainer.During the moments when I consider selling to grab an A7r, I keep coming back to a thought I had a month or so before the RX1 was announced. At that time I was considering something like the NEX cameras with a ZM 21mm f/2.8 and I said in my head, “I wish someone would make a carry-around camera with a full frame sensor and a fixed 35mm f/2.8 or f/2.” Now you understand how attractive the RX1 is to me and what a ridiculously high bar exists for another camera system to reach.
Okay, so what is different from the last review?
For one, I had an issue with the camera’s AF motor failing to engage and giving me an E61:00 error. I had to send it out to Sony for repairs (via extended warranty and service plan). I detailed my experience with Sony Service here [insert link] and I write to you as a very satisfied customer. That is to say, I have 3 years left on a 4 year + accidental damage warranty and I feel confident enough in that coverage to say that I will have this beauty in working order for at least another 3 years.For two, I’ve spent significantly less time thinking of this camera as a DSLR replacement and have instead started to develop a very different way of shooting with it. The activation barrier to taking a shot with my D800 is quite high. Beyond having to bring a large camera wherever you go and have it in hand, a proper camera takes two hands and full attention to produce an image. I shoot slowly and methodically and often from a tripod with the D800. In contrast, I can pull the RX1 out, pop off the lens cap, line up and take a shot with one hand (often with a toddler in the other). This fosters a totally different type of photography.
My “be-there” camera
The have-everywhere camera that gives DSLR type controls to one-handed shooting lets me pursue images that happen very quickly or images that might not normally meet the standards of “drag-the-DSLR-out-of-the-bag.” Many of those images you’ll see on this post. A full year of shooting and I can say this with great confidence: the RX1 is a terrific mash-up of point-and-shoot and DSLR not just in image quality and features, but primarily in the product it helps me create. To take this thinking a bit further: I find myself even processing images from the RX1 differently than I would from my DSLR. So much so that I have strongly considered starting a tumblr and posting JPEGs directly from the RX1 via my phone or an iPad rather than running the bulk of them through Lightroom, onto Flickr and then on the blog (really this is just a matter of time, stay tuned, and those readers who have experience with tumblr, cloud image storage and editing, etc, etc, please contact me, I want to pick your brain).Put simply, I capture more spontaneous and beautiful “moments” than I might have otherwise. Photography is very much an exercise in “f/8 and be there,” and the RX1 is my go-to “be there” camera.
The family camera
I mentioned earlier that I justified the purchase of the RX1 partly as a camera to be used to document the family moments into which a DSLR doesn’t neatly fit. Over the past year I’ve collected thousands and thousands of family images with the RX1. The cold hard truth is that many of those photos could be better if I’d taken a full DSLR kit with me to the park or the beach or the grocery store each time. The RX1 is a difficult camera to use on a toddler (or any moving subject for that matter); autofocus isn’t as fast as a professional DSLR, it’s difficult to perfectly compose via an LCD (especially in bright sunlight), but despite these shortcomings, it’s been an incredibly useful family camera. There are simply so many beautiful moments where I had the RX1 over my shoulder, ready to go that whatever difficulties exist relative to a DSLR, those pale in comparison to the power of it’s convenience. The best camera is the one in your hand.
Where to go from here.
So what is the value of these RX1 going forward, especially in a world of the A7/r and it’s yet-to-be-born siblings without an EVF and a pancake lens? Frankly, at its current price (which is quite fair when you consider the value of the the body and the lens) I see precious little room for an independent offering versus a mirrorless, interchangeable lens system with the same image quality in a package just as small. That doesn’t mean Sony won’t make an RX2 or an RX1 Mark II (have a look at it’s other product lines to see how many SKUs are maintained despite low demand). Instead, I see the RX1 as a bridge that needed to exist for engineers, managers, and the market to make it to the A7/r and it’s descendants.A Facebook friend recently paid me a great compliment; he said something like, “Justin, via your blog, you’ve sold a ton of RX1 cameras.” Indeed, despite my efforts not to be a salesman, I think he’s right: I have and would continue to recommend this camera.The true value of the RX1 going forward is for those of us who have the thing on our shoulders; and yes, if you have an investment in and a love for a DSLR system, there’s still tremendous value in getting one, slinging it over your shoulder, and heading out into the wide, bright world; A7/r or no, this is just an unbelievably capable camera.
A good thing continues
Some six months ago, I posted almost 100 images and a few thoughts I felt were missing from the many existing RX1 reviews. The outpouring of support and interest in that article was very gratifying. When I published, I had used the camera for six full months, enough time to come to a view of its strengths and weaknesses and to produce a small portfolio of good images, but not enough time to see the full picture (pun intended). In the following six months, I have used the camera at least as frequently as in the first six and have produced another small set of good images. It should be noted that my usage of the RX1 in the last six (and especially in the last 3) months has involved less travel and more time with the family and around the house; I will share relatively few of these images but will spend some time sharing my impressions of its functionality for family snapshots as I am sure there is some interest. And let it be said here: one of the primary motivations to purchase the camera was to take more photos with the family, and after one full year I can confidently say: money well spent.
The A7/r game-changer?
In the past six months, Sony have announced and released two full-frame, interchangeable lens cameras that clearly take design cues from the RX1: the A7 and the A7r. These cameras are innovative and highly capable and, as such, are in the midst of taking the photography world by storm. I think they are compelling enough cameras that I wonder whether Sony is wasting its energy continuing to develop further A-mount cameras. Sony deserve credit for a bold strategy—many companies would have been content to allow the success of the the RX1 (and RX1R) generate further sales before pushing further into the white space left unexplored by camera makers with less ambition.This is not the place to detail the relative advantages and disadvantages of the RX1 versus the A7/r except to make the following point. I currently use a Nikon D800 and an RX1: were I to sell both and purchase the A7r + 35mm f/2.8 I would in many ways lose nothing by way of imaging capability or lens compatibility but would pocket the surplus $1250-1750. Indeed this loyal Nikon owner thought long and hard about doing so, which speaks to the strategic importance of these cameras for a company trying to make inroads into a highly concentrated market.Ultimately, I opted to hang onto the two cameras I have (although this decision is one that I revisit time and time again) and continue to use them as I have for the past year. Let me give you a quick flavor of why.
The RX1 is smaller and more discrete
This is a small a point, but my gut reaction to the A7/r was: much smaller than the D800, not as small as the RX1. The EVF atop the A7/r and the larger profile of interchangeable mount lenses means that I would not be able to slip the A7/r into a pocket the way I can the RX1. Further, by virtue of using the EVF and its loud mechanical shutter, the A7/r just isn’t as stealthy as the RX1. Finally, f/2 beats the pants off of f/2.8 at the same or smaller size.At this point, some of you may be saying, “Future Sony releases will allow you to get a body without an EVF and get an f/2 lens that has a slimmer profile, etc, etc.” And that’s just the point: to oversimplify things, the reason I am keeping my RX1 is that Sony currently offers something close to an A7 body without a built-in EVF and with a slimmer profile 35mm f/2.
The D800 has important functional advantages
On the other side of the spectrum, the AF speed of the A7/r just isn’t going to match the D800, especially when the former is equipped with a Nikon lens and F-mount adapter. EVFs cannot yet match the experience of looking through the prism and the lens (I expect they will match soon, but aren’t there yet). What’s more, I have made such an investment in Nikon glass that I can’t yet justify purchasing an adapter for a Sony mount or selling them all for Sony’s offerings (many of which aren’t to market yet).Now, all of these are minor points and I think all of them disappear with an A8r, but they add up to something major: I have two cameras very well suited to two different types of shooting, and I ask myself if I gain or lose by getting something in between—something that wasn’t quite a pocket shooter and something that was quite a DSLR? You can imagine, however, that if I were coming to the market without a D800 and an RX1, that my decision would be far different: dollar for dollar, the A7/r would be a no-brainer.During the moments when I consider selling to grab an A7r, I keep coming back to a thought I had a month or so before the RX1 was announced. At that time I was considering something like the NEX cameras with a ZM 21mm f/2.8 and I said in my head, “I wish someone would make a carry-around camera with a full frame sensor and a fixed 35mm f/2.8 or f/2.” Now you understand how attractive the RX1 is to me and what a ridiculously high bar exists for another camera system to reach.
Okay, so what is different from the last review?
For one, I had an issue with the camera’s AF motor failing to engage and giving me an E61:00 error. I had to send it out to Sony for repairs (via extended warranty and service plan). I detailed my experience with Sony Service here [insert link] and I write to you as a very satisfied customer. That is to say, I have 3 years left on a 4 year + accidental damage warranty and I feel confident enough in that coverage to say that I will have this beauty in working order for at least another 3 years.For two, I’ve spent significantly less time thinking of this camera as a DSLR replacement and have instead started to develop a very different way of shooting with it. The activation barrier to taking a shot with my D800 is quite high. Beyond having to bring a large camera wherever you go and have it in hand, a proper camera takes two hands and full attention to produce an image. I shoot slowly and methodically and often from a tripod with the D800. In contrast, I can pull the RX1 out, pop off the lens cap, line up and take a shot with one hand (often with a toddler in the other). This fosters a totally different type of photography.
My “be-there” camera
The have-everywhere camera that gives DSLR type controls to one-handed shooting lets me pursue images that happen very quickly or images that might not normally meet the standards of “drag-the-DSLR-out-of-the-bag.” Many of those images you’ll see on this post. A full year of shooting and I can say this with great confidence: the RX1 is a terrific mash-up of point-and-shoot and DSLR not just in image quality and features, but primarily in the product it helps me create. To take this thinking a bit further: I find myself even processing images from the RX1 differently than I would from my DSLR. So much so that I have strongly considered starting a tumblr and posting JPEGs directly from the RX1 via my phone or an iPad rather than running the bulk of them through Lightroom, onto Flickr and then on the blog (really this is just a matter of time, stay tuned, and those readers who have experience with tumblr, cloud image storage and editing, etc, etc, please contact me, I want to pick your brain).Put simply, I capture more spontaneous and beautiful “moments” than I might have otherwise. Photography is very much an exercise in “f/8 and be there,” and the RX1 is my go-to “be there” camera.
The family camera
I mentioned earlier that I justified the purchase of the RX1 partly as a camera to be used to document the family moments into which a DSLR doesn’t neatly fit. Over the past year I’ve collected thousands and thousands of family images with the RX1. The cold hard truth is that many of those photos could be better if I’d taken a full DSLR kit with me to the park or the beach or the grocery store each time. The RX1 is a difficult camera to use on a toddler (or any moving subject for that matter); autofocus isn’t as fast as a professional DSLR, it’s difficult to perfectly compose via an LCD (especially in bright sunlight), but despite these shortcomings, it’s been an incredibly useful family camera. There are simply so many beautiful moments where I had the RX1 over my shoulder, ready to go that whatever difficulties exist relative to a DSLR, those pale in comparison to the power of it’s convenience. The best camera is the one in your hand.
Where to go from here.
So what is the value of these RX1 going forward, especially in a world of the A7/r and it’s yet-to-be-born siblings without an EVF and a pancake lens? Frankly, at its current price (which is quite fair when you consider the value of the the body and the lens) I see precious little room for an independent offering versus a mirrorless, interchangeable lens system with the same image quality in a package just as small. That doesn’t mean Sony won’t make an RX2 or an RX1 Mark II (have a look at it’s other product lines to see how many SKUs are maintained despite low demand). Instead, I see the RX1 as a bridge that needed to exist for engineers, managers, and the market to make it to the A7/r and it’s descendants.A Facebook friend recently paid me a great compliment; he said something like, “Justin, via your blog, you’ve sold a ton of RX1 cameras.” Indeed, despite my efforts not to be a salesman, I think he’s right: I have and would continue to recommend this camera.The true value of the RX1 going forward is for those of us who have the thing on our shoulders; and yes, if you have an investment in and a love for a DSLR system, there’s still tremendous value in getting one, slinging it over your shoulder, and heading out into the wide, bright world; A7/r or no, this is just an unbelievably capable camera.
Creator: Unidentified
Location: Queensland
Description: Methodically peeling homegrown mangoes.
View the original image at the State Library of Queensland: hdl.handle.net/10462/deriv/82649
Information about State Library of Queensland’s collection: www.slq.qld.gov.au/research-collections
You are free to use this image without permission. Please attribute State Library of Queensland.
The Nutshell Studies of Unexplained Death are a series of nineteen (twenty were originally constructed) intricately designed dollhouse-style dioramas created by Frances Glessner Lee (1878–1962), a pioneer in forensic science. Glessner Lee used her inheritance to establish a department of legal medicine at Harvard Medical School in 1936, and donated the first of the Nutshell Studies in 1946 for use in lectures on the subject of crime scene investigation. In 1966, the department was dissolved, and the dioramas went to the Maryland Medical Examiner’s Office in Baltimore, Maryland, U.S. where they are on permanent loan and still used for forensic seminars.
The dioramas are detailed representations of death scenes that are composites of actual cases, created by Glessner Lee on a 1 inch to 1 foot (1:12) scale. She attended autopsies to ensure accuracy, and her attention to detail extended to having a wall calendar include the pages after the month of the incident, constructing openable windows, and wearing out-of-date clothing to obtain realistically worn fabric. The dioramas show tawdry and, in many cases, disheveled living spaces very different from Glessner Lee's own background. The dead include prostitutes and victims of domestic violence.
Glessner Lee called them the Nutshell Studies because the purpose of a forensic investigation is said to be to "convict the guilty, clear the innocent, and find the truth in a nutshell." Students were instructed to study the scenes methodically—Glessner Lee suggested moving the eyes in a clockwise spiral—and draw conclusions from the visual evidence. At conferences hosted by Glessner Lee, prominent crime-scene investigators were given 90 minutes to study each diorama.
A good thing continues
Some six months ago, I posted almost 100 images and a few thoughts I felt were missing from the many existing RX1 reviews. The outpouring of support and interest in that article was very gratifying. When I published, I had used the camera for six full months, enough time to come to a view of its strengths and weaknesses and to produce a small portfolio of good images, but not enough time to see the full picture (pun intended). In the following six months, I have used the camera at least as frequently as in the first six and have produced another small set of good images. It should be noted that my usage of the RX1 in the last six (and especially in the last 3) months has involved less travel and more time with the family and around the house; I will share relatively few of these images but will spend some time sharing my impressions of its functionality for family snapshots as I am sure there is some interest. And let it be said here: one of the primary motivations to purchase the camera was to take more photos with the family, and after one full year I can confidently say: money well spent.
The A7/r game-changer?
In the past six months, Sony have announced and released two full-frame, interchangeable lens cameras that clearly take design cues from the RX1: the A7 and the A7r. These cameras are innovative and highly capable and, as such, are in the midst of taking the photography world by storm. I think they are compelling enough cameras that I wonder whether Sony is wasting its energy continuing to develop further A-mount cameras. Sony deserve credit for a bold strategy—many companies would have been content to allow the success of the the RX1 (and RX1R) generate further sales before pushing further into the white space left unexplored by camera makers with less ambition.This is not the place to detail the relative advantages and disadvantages of the RX1 versus the A7/r except to make the following point. I currently use a Nikon D800 and an RX1: were I to sell both and purchase the A7r + 35mm f/2.8 I would in many ways lose nothing by way of imaging capability or lens compatibility but would pocket the surplus $1250-1750. Indeed this loyal Nikon owner thought long and hard about doing so, which speaks to the strategic importance of these cameras for a company trying to make inroads into a highly concentrated market.Ultimately, I opted to hang onto the two cameras I have (although this decision is one that I revisit time and time again) and continue to use them as I have for the past year. Let me give you a quick flavor of why.
The RX1 is smaller and more discrete
This is a small a point, but my gut reaction to the A7/r was: much smaller than the D800, not as small as the RX1. The EVF atop the A7/r and the larger profile of interchangeable mount lenses means that I would not be able to slip the A7/r into a pocket the way I can the RX1. Further, by virtue of using the EVF and its loud mechanical shutter, the A7/r just isn’t as stealthy as the RX1. Finally, f/2 beats the pants off of f/2.8 at the same or smaller size.At this point, some of you may be saying, “Future Sony releases will allow you to get a body without an EVF and get an f/2 lens that has a slimmer profile, etc, etc.” And that’s just the point: to oversimplify things, the reason I am keeping my RX1 is that Sony currently offers something close to an A7 body without a built-in EVF and with a slimmer profile 35mm f/2.
The D800 has important functional advantages
On the other side of the spectrum, the AF speed of the A7/r just isn’t going to match the D800, especially when the former is equipped with a Nikon lens and F-mount adapter. EVFs cannot yet match the experience of looking through the prism and the lens (I expect they will match soon, but aren’t there yet). What’s more, I have made such an investment in Nikon glass that I can’t yet justify purchasing an adapter for a Sony mount or selling them all for Sony’s offerings (many of which aren’t to market yet).Now, all of these are minor points and I think all of them disappear with an A8r, but they add up to something major: I have two cameras very well suited to two different types of shooting, and I ask myself if I gain or lose by getting something in between—something that wasn’t quite a pocket shooter and something that was quite a DSLR? You can imagine, however, that if I were coming to the market without a D800 and an RX1, that my decision would be far different: dollar for dollar, the A7/r would be a no-brainer.During the moments when I consider selling to grab an A7r, I keep coming back to a thought I had a month or so before the RX1 was announced. At that time I was considering something like the NEX cameras with a ZM 21mm f/2.8 and I said in my head, “I wish someone would make a carry-around camera with a full frame sensor and a fixed 35mm f/2.8 or f/2.” Now you understand how attractive the RX1 is to me and what a ridiculously high bar exists for another camera system to reach.
Okay, so what is different from the last review?
For one, I had an issue with the camera’s AF motor failing to engage and giving me an E61:00 error. I had to send it out to Sony for repairs (via extended warranty and service plan). I detailed my experience with Sony Service here [insert link] and I write to you as a very satisfied customer. That is to say, I have 3 years left on a 4 year + accidental damage warranty and I feel confident enough in that coverage to say that I will have this beauty in working order for at least another 3 years.For two, I’ve spent significantly less time thinking of this camera as a DSLR replacement and have instead started to develop a very different way of shooting with it. The activation barrier to taking a shot with my D800 is quite high. Beyond having to bring a large camera wherever you go and have it in hand, a proper camera takes two hands and full attention to produce an image. I shoot slowly and methodically and often from a tripod with the D800. In contrast, I can pull the RX1 out, pop off the lens cap, line up and take a shot with one hand (often with a toddler in the other). This fosters a totally different type of photography.
My “be-there” camera
The have-everywhere camera that gives DSLR type controls to one-handed shooting lets me pursue images that happen very quickly or images that might not normally meet the standards of “drag-the-DSLR-out-of-the-bag.” Many of those images you’ll see on this post. A full year of shooting and I can say this with great confidence: the RX1 is a terrific mash-up of point-and-shoot and DSLR not just in image quality and features, but primarily in the product it helps me create. To take this thinking a bit further: I find myself even processing images from the RX1 differently than I would from my DSLR. So much so that I have strongly considered starting a tumblr and posting JPEGs directly from the RX1 via my phone or an iPad rather than running the bulk of them through Lightroom, onto Flickr and then on the blog (really this is just a matter of time, stay tuned, and those readers who have experience with tumblr, cloud image storage and editing, etc, etc, please contact me, I want to pick your brain).Put simply, I capture more spontaneous and beautiful “moments” than I might have otherwise. Photography is very much an exercise in “f/8 and be there,” and the RX1 is my go-to “be there” camera.
The family camera
I mentioned earlier that I justified the purchase of the RX1 partly as a camera to be used to document the family moments into which a DSLR doesn’t neatly fit. Over the past year I’ve collected thousands and thousands of family images with the RX1. The cold hard truth is that many of those photos could be better if I’d taken a full DSLR kit with me to the park or the beach or the grocery store each time. The RX1 is a difficult camera to use on a toddler (or any moving subject for that matter); autofocus isn’t as fast as a professional DSLR, it’s difficult to perfectly compose via an LCD (especially in bright sunlight), but despite these shortcomings, it’s been an incredibly useful family camera. There are simply so many beautiful moments where I had the RX1 over my shoulder, ready to go that whatever difficulties exist relative to a DSLR, those pale in comparison to the power of it’s convenience. The best camera is the one in your hand.
Where to go from here.
So what is the value of these RX1 going forward, especially in a world of the A7/r and it’s yet-to-be-born siblings without an EVF and a pancake lens? Frankly, at its current price (which is quite fair when you consider the value of the the body and the lens) I see precious little room for an independent offering versus a mirrorless, interchangeable lens system with the same image quality in a package just as small. That doesn’t mean Sony won’t make an RX2 or an RX1 Mark II (have a look at it’s other product lines to see how many SKUs are maintained despite low demand). Instead, I see the RX1 as a bridge that needed to exist for engineers, managers, and the market to make it to the A7/r and it’s descendants.A Facebook friend recently paid me a great compliment; he said something like, “Justin, via your blog, you’ve sold a ton of RX1 cameras.” Indeed, despite my efforts not to be a salesman, I think he’s right: I have and would continue to recommend this camera.The true value of the RX1 going forward is for those of us who have the thing on our shoulders; and yes, if you have an investment in and a love for a DSLR system, there’s still tremendous value in getting one, slinging it over your shoulder, and heading out into the wide, bright world; A7/r or no, this is just an unbelievably capable camera.
A good thing continues
Some six months ago, I posted almost 100 images and a few thoughts I felt were missing from the many existing RX1 reviews. The outpouring of support and interest in that article was very gratifying. When I published, I had used the camera for six full months, enough time to come to a view of its strengths and weaknesses and to produce a small portfolio of good images, but not enough time to see the full picture (pun intended). In the following six months, I have used the camera at least as frequently as in the first six and have produced another small set of good images. It should be noted that my usage of the RX1 in the last six (and especially in the last 3) months has involved less travel and more time with the family and around the house; I will share relatively few of these images but will spend some time sharing my impressions of its functionality for family snapshots as I am sure there is some interest. And let it be said here: one of the primary motivations to purchase the camera was to take more photos with the family, and after one full year I can confidently say: money well spent.
The A7/r game-changer?
In the past six months, Sony have announced and released two full-frame, interchangeable lens cameras that clearly take design cues from the RX1: the A7 and the A7r. These cameras are innovative and highly capable and, as such, are in the midst of taking the photography world by storm. I think they are compelling enough cameras that I wonder whether Sony is wasting its energy continuing to develop further A-mount cameras. Sony deserve credit for a bold strategy—many companies would have been content to allow the success of the the RX1 (and RX1R) generate further sales before pushing further into the white space left unexplored by camera makers with less ambition.This is not the place to detail the relative advantages and disadvantages of the RX1 versus the A7/r except to make the following point. I currently use a Nikon D800 and an RX1: were I to sell both and purchase the A7r + 35mm f/2.8 I would in many ways lose nothing by way of imaging capability or lens compatibility but would pocket the surplus $1250-1750. Indeed this loyal Nikon owner thought long and hard about doing so, which speaks to the strategic importance of these cameras for a company trying to make inroads into a highly concentrated market.Ultimately, I opted to hang onto the two cameras I have (although this decision is one that I revisit time and time again) and continue to use them as I have for the past year. Let me give you a quick flavor of why.
The RX1 is smaller and more discrete
This is a small a point, but my gut reaction to the A7/r was: much smaller than the D800, not as small as the RX1. The EVF atop the A7/r and the larger profile of interchangeable mount lenses means that I would not be able to slip the A7/r into a pocket the way I can the RX1. Further, by virtue of using the EVF and its loud mechanical shutter, the A7/r just isn’t as stealthy as the RX1. Finally, f/2 beats the pants off of f/2.8 at the same or smaller size.At this point, some of you may be saying, “Future Sony releases will allow you to get a body without an EVF and get an f/2 lens that has a slimmer profile, etc, etc.” And that’s just the point: to oversimplify things, the reason I am keeping my RX1 is that Sony currently offers something close to an A7 body without a built-in EVF and with a slimmer profile 35mm f/2.
The D800 has important functional advantages
On the other side of the spectrum, the AF speed of the A7/r just isn’t going to match the D800, especially when the former is equipped with a Nikon lens and F-mount adapter. EVFs cannot yet match the experience of looking through the prism and the lens (I expect they will match soon, but aren’t there yet). What’s more, I have made such an investment in Nikon glass that I can’t yet justify purchasing an adapter for a Sony mount or selling them all for Sony’s offerings (many of which aren’t to market yet).Now, all of these are minor points and I think all of them disappear with an A8r, but they add up to something major: I have two cameras very well suited to two different types of shooting, and I ask myself if I gain or lose by getting something in between—something that wasn’t quite a pocket shooter and something that was quite a DSLR? You can imagine, however, that if I were coming to the market without a D800 and an RX1, that my decision would be far different: dollar for dollar, the A7/r would be a no-brainer.During the moments when I consider selling to grab an A7r, I keep coming back to a thought I had a month or so before the RX1 was announced. At that time I was considering something like the NEX cameras with a ZM 21mm f/2.8 and I said in my head, “I wish someone would make a carry-around camera with a full frame sensor and a fixed 35mm f/2.8 or f/2.” Now you understand how attractive the RX1 is to me and what a ridiculously high bar exists for another camera system to reach.
Okay, so what is different from the last review?
For one, I had an issue with the camera’s AF motor failing to engage and giving me an E61:00 error. I had to send it out to Sony for repairs (via extended warranty and service plan). I detailed my experience with Sony Service here [insert link] and I write to you as a very satisfied customer. That is to say, I have 3 years left on a 4 year + accidental damage warranty and I feel confident enough in that coverage to say that I will have this beauty in working order for at least another 3 years.For two, I’ve spent significantly less time thinking of this camera as a DSLR replacement and have instead started to develop a very different way of shooting with it. The activation barrier to taking a shot with my D800 is quite high. Beyond having to bring a large camera wherever you go and have it in hand, a proper camera takes two hands and full attention to produce an image. I shoot slowly and methodically and often from a tripod with the D800. In contrast, I can pull the RX1 out, pop off the lens cap, line up and take a shot with one hand (often with a toddler in the other). This fosters a totally different type of photography.
My “be-there” camera
The have-everywhere camera that gives DSLR type controls to one-handed shooting lets me pursue images that happen very quickly or images that might not normally meet the standards of “drag-the-DSLR-out-of-the-bag.” Many of those images you’ll see on this post. A full year of shooting and I can say this with great confidence: the RX1 is a terrific mash-up of point-and-shoot and DSLR not just in image quality and features, but primarily in the product it helps me create. To take this thinking a bit further: I find myself even processing images from the RX1 differently than I would from my DSLR. So much so that I have strongly considered starting a tumblr and posting JPEGs directly from the RX1 via my phone or an iPad rather than running the bulk of them through Lightroom, onto Flickr and then on the blog (really this is just a matter of time, stay tuned, and those readers who have experience with tumblr, cloud image storage and editing, etc, etc, please contact me, I want to pick your brain).Put simply, I capture more spontaneous and beautiful “moments” than I might have otherwise. Photography is very much an exercise in “f/8 and be there,” and the RX1 is my go-to “be there” camera.
The family camera
I mentioned earlier that I justified the purchase of the RX1 partly as a camera to be used to document the family moments into which a DSLR doesn’t neatly fit. Over the past year I’ve collected thousands and thousands of family images with the RX1. The cold hard truth is that many of those photos could be better if I’d taken a full DSLR kit with me to the park or the beach or the grocery store each time. The RX1 is a difficult camera to use on a toddler (or any moving subject for that matter); autofocus isn’t as fast as a professional DSLR, it’s difficult to perfectly compose via an LCD (especially in bright sunlight), but despite these shortcomings, it’s been an incredibly useful family camera. There are simply so many beautiful moments where I had the RX1 over my shoulder, ready to go that whatever difficulties exist relative to a DSLR, those pale in comparison to the power of it’s convenience. The best camera is the one in your hand.
Where to go from here.
So what is the value of these RX1 going forward, especially in a world of the A7/r and it’s yet-to-be-born siblings without an EVF and a pancake lens? Frankly, at its current price (which is quite fair when you consider the value of the the body and the lens) I see precious little room for an independent offering versus a mirrorless, interchangeable lens system with the same image quality in a package just as small. That doesn’t mean Sony won’t make an RX2 or an RX1 Mark II (have a look at it’s other product lines to see how many SKUs are maintained despite low demand). Instead, I see the RX1 as a bridge that needed to exist for engineers, managers, and the market to make it to the A7/r and it’s descendants.A Facebook friend recently paid me a great compliment; he said something like, “Justin, via your blog, you’ve sold a ton of RX1 cameras.” Indeed, despite my efforts not to be a salesman, I think he’s right: I have and would continue to recommend this camera.The true value of the RX1 going forward is for those of us who have the thing on our shoulders; and yes, if you have an investment in and a love for a DSLR system, there’s still tremendous value in getting one, slinging it over your shoulder, and heading out into the wide, bright world; A7/r or no, this is just an unbelievably capable camera.
A good thing continues
Some six months ago, I posted almost 100 images and a few thoughts I felt were missing from the many existing RX1 reviews. The outpouring of support and interest in that article was very gratifying. When I published, I had used the camera for six full months, enough time to come to a view of its strengths and weaknesses and to produce a small portfolio of good images, but not enough time to see the full picture (pun intended). In the following six months, I have used the camera at least as frequently as in the first six and have produced another small set of good images. It should be noted that my usage of the RX1 in the last six (and especially in the last 3) months has involved less travel and more time with the family and around the house; I will share relatively few of these images but will spend some time sharing my impressions of its functionality for family snapshots as I am sure there is some interest. And let it be said here: one of the primary motivations to purchase the camera was to take more photos with the family, and after one full year I can confidently say: money well spent.
The A7/r game-changer?
In the past six months, Sony have announced and released two full-frame, interchangeable lens cameras that clearly take design cues from the RX1: the A7 and the A7r. These cameras are innovative and highly capable and, as such, are in the midst of taking the photography world by storm. I think they are compelling enough cameras that I wonder whether Sony is wasting its energy continuing to develop further A-mount cameras. Sony deserve credit for a bold strategy—many companies would have been content to allow the success of the the RX1 (and RX1R) generate further sales before pushing further into the white space left unexplored by camera makers with less ambition.This is not the place to detail the relative advantages and disadvantages of the RX1 versus the A7/r except to make the following point. I currently use a Nikon D800 and an RX1: were I to sell both and purchase the A7r + 35mm f/2.8 I would in many ways lose nothing by way of imaging capability or lens compatibility but would pocket the surplus $1250-1750. Indeed this loyal Nikon owner thought long and hard about doing so, which speaks to the strategic importance of these cameras for a company trying to make inroads into a highly concentrated market.Ultimately, I opted to hang onto the two cameras I have (although this decision is one that I revisit time and time again) and continue to use them as I have for the past year. Let me give you a quick flavor of why.
The RX1 is smaller and more discrete
This is a small a point, but my gut reaction to the A7/r was: much smaller than the D800, not as small as the RX1. The EVF atop the A7/r and the larger profile of interchangeable mount lenses means that I would not be able to slip the A7/r into a pocket the way I can the RX1. Further, by virtue of using the EVF and its loud mechanical shutter, the A7/r just isn’t as stealthy as the RX1. Finally, f/2 beats the pants off of f/2.8 at the same or smaller size.At this point, some of you may be saying, “Future Sony releases will allow you to get a body without an EVF and get an f/2 lens that has a slimmer profile, etc, etc.” And that’s just the point: to oversimplify things, the reason I am keeping my RX1 is that Sony currently offers something close to an A7 body without a built-in EVF and with a slimmer profile 35mm f/2.
The D800 has important functional advantages
On the other side of the spectrum, the AF speed of the A7/r just isn’t going to match the D800, especially when the former is equipped with a Nikon lens and F-mount adapter. EVFs cannot yet match the experience of looking through the prism and the lens (I expect they will match soon, but aren’t there yet). What’s more, I have made such an investment in Nikon glass that I can’t yet justify purchasing an adapter for a Sony mount or selling them all for Sony’s offerings (many of which aren’t to market yet).Now, all of these are minor points and I think all of them disappear with an A8r, but they add up to something major: I have two cameras very well suited to two different types of shooting, and I ask myself if I gain or lose by getting something in between—something that wasn’t quite a pocket shooter and something that was quite a DSLR? You can imagine, however, that if I were coming to the market without a D800 and an RX1, that my decision would be far different: dollar for dollar, the A7/r would be a no-brainer.During the moments when I consider selling to grab an A7r, I keep coming back to a thought I had a month or so before the RX1 was announced. At that time I was considering something like the NEX cameras with a ZM 21mm f/2.8 and I said in my head, “I wish someone would make a carry-around camera with a full frame sensor and a fixed 35mm f/2.8 or f/2.” Now you understand how attractive the RX1 is to me and what a ridiculously high bar exists for another camera system to reach.
Okay, so what is different from the last review?
For one, I had an issue with the camera’s AF motor failing to engage and giving me an E61:00 error. I had to send it out to Sony for repairs (via extended warranty and service plan). I detailed my experience with Sony Service here [insert link] and I write to you as a very satisfied customer. That is to say, I have 3 years left on a 4 year + accidental damage warranty and I feel confident enough in that coverage to say that I will have this beauty in working order for at least another 3 years.For two, I’ve spent significantly less time thinking of this camera as a DSLR replacement and have instead started to develop a very different way of shooting with it. The activation barrier to taking a shot with my D800 is quite high. Beyond having to bring a large camera wherever you go and have it in hand, a proper camera takes two hands and full attention to produce an image. I shoot slowly and methodically and often from a tripod with the D800. In contrast, I can pull the RX1 out, pop off the lens cap, line up and take a shot with one hand (often with a toddler in the other). This fosters a totally different type of photography.
My “be-there” camera
The have-everywhere camera that gives DSLR type controls to one-handed shooting lets me pursue images that happen very quickly or images that might not normally meet the standards of “drag-the-DSLR-out-of-the-bag.” Many of those images you’ll see on this post. A full year of shooting and I can say this with great confidence: the RX1 is a terrific mash-up of point-and-shoot and DSLR not just in image quality and features, but primarily in the product it helps me create. To take this thinking a bit further: I find myself even processing images from the RX1 differently than I would from my DSLR. So much so that I have strongly considered starting a tumblr and posting JPEGs directly from the RX1 via my phone or an iPad rather than running the bulk of them through Lightroom, onto Flickr and then on the blog (really this is just a matter of time, stay tuned, and those readers who have experience with tumblr, cloud image storage and editing, etc, etc, please contact me, I want to pick your brain).Put simply, I capture more spontaneous and beautiful “moments” than I might have otherwise. Photography is very much an exercise in “f/8 and be there,” and the RX1 is my go-to “be there” camera.
The family camera
I mentioned earlier that I justified the purchase of the RX1 partly as a camera to be used to document the family moments into which a DSLR doesn’t neatly fit. Over the past year I’ve collected thousands and thousands of family images with the RX1. The cold hard truth is that many of those photos could be better if I’d taken a full DSLR kit with me to the park or the beach or the grocery store each time. The RX1 is a difficult camera to use on a toddler (or any moving subject for that matter); autofocus isn’t as fast as a professional DSLR, it’s difficult to perfectly compose via an LCD (especially in bright sunlight), but despite these shortcomings, it’s been an incredibly useful family camera. There are simply so many beautiful moments where I had the RX1 over my shoulder, ready to go that whatever difficulties exist relative to a DSLR, those pale in comparison to the power of it’s convenience. The best camera is the one in your hand.
Where to go from here.
So what is the value of these RX1 going forward, especially in a world of the A7/r and it’s yet-to-be-born siblings without an EVF and a pancake lens? Frankly, at its current price (which is quite fair when you consider the value of the the body and the lens) I see precious little room for an independent offering versus a mirrorless, interchangeable lens system with the same image quality in a package just as small. That doesn’t mean Sony won’t make an RX2 or an RX1 Mark II (have a look at it’s other product lines to see how many SKUs are maintained despite low demand). Instead, I see the RX1 as a bridge that needed to exist for engineers, managers, and the market to make it to the A7/r and it’s descendants.A Facebook friend recently paid me a great compliment; he said something like, “Justin, via your blog, you’ve sold a ton of RX1 cameras.” Indeed, despite my efforts not to be a salesman, I think he’s right: I have and would continue to recommend this camera.The true value of the RX1 going forward is for those of us who have the thing on our shoulders; and yes, if you have an investment in and a love for a DSLR system, there’s still tremendous value in getting one, slinging it over your shoulder, and heading out into the wide, bright world; A7/r or no, this is just an unbelievably capable camera.
A mature maple tree needed to be removed from next to a neighbor's house. This crew, using a crane, a "cherry picker" and a ground crew methodically took the tree apart. Professional, efficient job.
Methodically laid out walkways and buildings. The place had an aura of old times, I suppose.
November 2020, St. Augustine, Florida.
(further information you can get by clicking on the link at the end of page!)
History
Plaque to the founder of the Hyrtl'schen orphanage Joseph Hyrtl and Joseph Schöffel
© IMAREAL / E. Vavra
The Biedermeier-influenced city on the edge of the Vienna Woods is the capital of the district Mödling in the south of Vienna. The town has experienced in its 1100-year history since the first mention very different phases: in the Middle Ages briefly Babenberg residence, for centuries an economically potent wine market, from the 19th Century summer resort and industrial center, since 1875 town, in the 20th Century for almost two decades XXIVth district of Vienna, since 1954 again an independent municipality of Lower Austria and as a school and garden city popular residential area in the vicinity of Vienna.
Mödling has partnerships with cities in France, Belgium, Luxembourg, Germany, Hungary, Czech Republic, Serbia, Bulgaria and Italy.
The historical tradition of Mödling goes back far beyond the first written mention, how settlement finds from the Neolithic Age, Hallstatt period (eg calendar mountain) and Roman times as well as the great Avar burial ground "at the Golden Staircase" from the 7/8th Century BCE prove. In the year 903 Mödling is first mentioned (Medilihha). The later settlement was probably made in the 11th Century beneath an early castle building on the church mountain (Kirchenberg), where later a Romanesque predecessor of Othmar church was built.
In the late 12th century Mödling was for a few decades the residence of a Babenberg branch line. Henry the Elder, a brother of Duke Leopold V., had since the 1170 century belongings in and around Mödling. He and his son Henry the Younger, calling himself "Duke of Mödling", resided on the castle probably built around 1150 in the Klausen, among whose most famous visitors was Walther von der Vogelweide. With the death of Henry the Younger in 1236 extinguished the Mödlinger line of the Babenberg and the reign became princely domain. The time of the Babenberg commemorates the in late 12th Century built Romanesque ossuary at Othmar church - a circular building with an apse - as well as the denomination "Babenberg".
In the late Middle Ages, Medlich developed into a major wine market (1343 mention of market town) which in the 15th Century as one of the four princely spell markets was also represented in the Parliament - in addition to Gumpoldskirchen, Langenlois and Perchtoldsdorf. For centuries shaped the wine-growing the economy and social structure. The Mödlinger wine was good and helped the market particularly in the 15th and 16th Century to its prosperity. The settlement reached at the end of the Middle Ages that extent, which until the 19th Century should remain essentially unchanged. The center formed the area around the Schrannenplatz with a dense stand of late medieval and early modern town houses that bear evidence of the wealth and self-confidence of the citizens of the market town. From the late medieval Schrannen building, the official residence of the market judge, was created in 1548 the representative Renaissance town hall with loggia.
The elevated lying Othmar church became in the 15th Century by transferring the rights of the church of St. Martin parish church of Mödling. The massive late Gothic church was built in a nearly 70-year construction period from 1454 to 1523 on the walls of six predecessors and able to resist fortified. As Mödling was destroyed in 1529 by the Ottomans, the just completed church lost its roof and remained for over a century till the restoration in 1660/70 a ruin. On the Merian engraving from 1649 the uncovered Othmar church on the left side is clearly visible. As a temporary parish church served the about 1450 built late-Gothic hospital church.
The internal conditions at this time were mainly marked of the clashes of the market with the princely rule Burg Mödling - since 1558 combined with the rule of Liechtenstein - which reached its climax in 1600 under the energetic administrator Georg Wiesing (1593-1611). During the Reformation, the market largely became Protestant. In the course of recatholicization a Capuchin monastery was founded in 1631, which served as a factory after the repeal under Joseph II and was then bought by the Thonet family (so-called Thonet Schlössel, today Bezirksmuseum).
In Türkenjahr 1683 (besiegement of the Turks) took place in the Othmar church a horrific bloodbath, in which hundreds of people who had sought refuge there were killed. The church was destroyed again, but this time built up rapidly with the market judge Wolfgang Ignaz Viechtl in a few years.
End of the 18th Century occurred in Mödling the settlement of industrial enterprises, especially textile mills that took advantage of the cheaper production possibilities and also its proximity to Vienna. Was decisively shaped the character of the place but by the rise to a summer resort, initiated by Prince Johann I of Liechtenstein beginning of the 19th Century, which acquired in 1807 the rule of Liechtenstein-Mödling with the former family ancestral home. He had the area under enormous cost reforested (Schirmföhren/pinus mugo, acacia, etc.) and transformed to a public park in Romantic style with promenade paths, steep paths and artificial constructions (Black tower, amphitheater, Husarentempel). The ruined castles Mödling and Liechtenstein were restored. The former Liechtenstein'sche landscape park is considered a remarkable example of the garden culture in 1800 and is now a popular tourist destination (1974 Natural Preserve Föhrenberge).
Since the Biedermeier Mödling in the summer was an extremely popular artist hangout. Among the most famous artists of the 19th Century who were inspired by the romantic nature here, were Franz Schubert, Franz Grillparzer, Ferdinand Waldmüller, Ferdinand Raimund and Ludwig van Beethoven, who here worked on one of his major works, the "Missa Solemnis". In the 20th Century settled inter alia Arnold Schönberg, Anton von Webern, Anton Wildgans, Franz Theodor Csokor and Albert Drach temporarily or permanently down. To Beethoven, Schönberg and Wildgans memorials have been established (Beethoven House, Schönberg House, Wildgans archive).
In the second half of the 19th Century Mödling became administrative center (District Court, District administration) and an industrial site and educational location with high schools and colleges (eg educational establishment Francisco-Josephinum). The good traffic situation at the southern railway, the progressive industrialization and the expansion of health facilities (park, Kursalon) led to a rapid expansion of the hitherto for centuries unchanged market. Under mayor Joseph Schöffel (1873-1882), who became famous because of his successful engagement against the deforestation of the Vienna Woods as the "savior of the Vienna Woods", followed the methodical installation of the so-called Schoeffel(before) city - Schöffelvorstadt (New Mödling) east of the Southern Railway and the establishment of workers' settlements. Later followed the exclusive residential areas of the turn of the century with their representative residential buildings. Probably the most important building of the late 19th Century is the Hyrtl'sche orphanage (1886-1889), founded by the Viennese anatomist, Joseph Hyrtl and Joseph Schöffel. The Orphanage church St. Joseph was built on the in 1787 demolished Martin Church.
On 18th November 1875 the emerging market town was raised to the status of a city, two years later the incorporation of Klausen and Vorderbrühl took place. Through the establishment of Great-Vienna under the Nazi regime on 15th October 1938 the young city for 16 years lost its municipal autonomy; 1954 it became again a part of Lower Austria.
Symbol for the characteristic environment of Mödling was the "width pine" on the Anninger whose age goes back to the 16th Century (around 1550). It was a well-known natural landmark and has become the symbol of the city. 1988 died the tree and it had to be removed in 1997 for safety reasons. The remains are now in the Lower Austrian Provincial Museum.
www.xn--gedchtnisdeslandes-ntb.at/orte/action/show/contro...
A good thing continues
Some six months ago, I posted almost 100 images and a few thoughts I felt were missing from the many existing RX1 reviews. The outpouring of support and interest in that article was very gratifying. When I published, I had used the camera for six full months, enough time to come to a view of its strengths and weaknesses and to produce a small portfolio of good images, but not enough time to see the full picture (pun intended). In the following six months, I have used the camera at least as frequently as in the first six and have produced another small set of good images. It should be noted that my usage of the RX1 in the last six (and especially in the last 3) months has involved less travel and more time with the family and around the house; I will share relatively few of these images but will spend some time sharing my impressions of its functionality for family snapshots as I am sure there is some interest. And let it be said here: one of the primary motivations to purchase the camera was to take more photos with the family, and after one full year I can confidently say: money well spent.
The A7/r game-changer?
In the past six months, Sony have announced and released two full-frame, interchangeable lens cameras that clearly take design cues from the RX1: the A7 and the A7r. These cameras are innovative and highly capable and, as such, are in the midst of taking the photography world by storm. I think they are compelling enough cameras that I wonder whether Sony is wasting its energy continuing to develop further A-mount cameras. Sony deserve credit for a bold strategy—many companies would have been content to allow the success of the the RX1 (and RX1R) generate further sales before pushing further into the white space left unexplored by camera makers with less ambition.This is not the place to detail the relative advantages and disadvantages of the RX1 versus the A7/r except to make the following point. I currently use a Nikon D800 and an RX1: were I to sell both and purchase the A7r + 35mm f/2.8 I would in many ways lose nothing by way of imaging capability or lens compatibility but would pocket the surplus $1250-1750. Indeed this loyal Nikon owner thought long and hard about doing so, which speaks to the strategic importance of these cameras for a company trying to make inroads into a highly concentrated market.Ultimately, I opted to hang onto the two cameras I have (although this decision is one that I revisit time and time again) and continue to use them as I have for the past year. Let me give you a quick flavor of why.
The RX1 is smaller and more discrete
This is a small a point, but my gut reaction to the A7/r was: much smaller than the D800, not as small as the RX1. The EVF atop the A7/r and the larger profile of interchangeable mount lenses means that I would not be able to slip the A7/r into a pocket the way I can the RX1. Further, by virtue of using the EVF and its loud mechanical shutter, the A7/r just isn’t as stealthy as the RX1. Finally, f/2 beats the pants off of f/2.8 at the same or smaller size.At this point, some of you may be saying, “Future Sony releases will allow you to get a body without an EVF and get an f/2 lens that has a slimmer profile, etc, etc.” And that’s just the point: to oversimplify things, the reason I am keeping my RX1 is that Sony currently offers something close to an A7 body without a built-in EVF and with a slimmer profile 35mm f/2.
The D800 has important functional advantages
On the other side of the spectrum, the AF speed of the A7/r just isn’t going to match the D800, especially when the former is equipped with a Nikon lens and F-mount adapter. EVFs cannot yet match the experience of looking through the prism and the lens (I expect they will match soon, but aren’t there yet). What’s more, I have made such an investment in Nikon glass that I can’t yet justify purchasing an adapter for a Sony mount or selling them all for Sony’s offerings (many of which aren’t to market yet).Now, all of these are minor points and I think all of them disappear with an A8r, but they add up to something major: I have two cameras very well suited to two different types of shooting, and I ask myself if I gain or lose by getting something in between—something that wasn’t quite a pocket shooter and something that was quite a DSLR? You can imagine, however, that if I were coming to the market without a D800 and an RX1, that my decision would be far different: dollar for dollar, the A7/r would be a no-brainer.During the moments when I consider selling to grab an A7r, I keep coming back to a thought I had a month or so before the RX1 was announced. At that time I was considering something like the NEX cameras with a ZM 21mm f/2.8 and I said in my head, “I wish someone would make a carry-around camera with a full frame sensor and a fixed 35mm f/2.8 or f/2.” Now you understand how attractive the RX1 is to me and what a ridiculously high bar exists for another camera system to reach.
Okay, so what is different from the last review?
For one, I had an issue with the camera’s AF motor failing to engage and giving me an E61:00 error. I had to send it out to Sony for repairs (via extended warranty and service plan). I detailed my experience with Sony Service here [insert link] and I write to you as a very satisfied customer. That is to say, I have 3 years left on a 4 year + accidental damage warranty and I feel confident enough in that coverage to say that I will have this beauty in working order for at least another 3 years.For two, I’ve spent significantly less time thinking of this camera as a DSLR replacement and have instead started to develop a very different way of shooting with it. The activation barrier to taking a shot with my D800 is quite high. Beyond having to bring a large camera wherever you go and have it in hand, a proper camera takes two hands and full attention to produce an image. I shoot slowly and methodically and often from a tripod with the D800. In contrast, I can pull the RX1 out, pop off the lens cap, line up and take a shot with one hand (often with a toddler in the other). This fosters a totally different type of photography.
My “be-there” camera
The have-everywhere camera that gives DSLR type controls to one-handed shooting lets me pursue images that happen very quickly or images that might not normally meet the standards of “drag-the-DSLR-out-of-the-bag.” Many of those images you’ll see on this post. A full year of shooting and I can say this with great confidence: the RX1 is a terrific mash-up of point-and-shoot and DSLR not just in image quality and features, but primarily in the product it helps me create. To take this thinking a bit further: I find myself even processing images from the RX1 differently than I would from my DSLR. So much so that I have strongly considered starting a tumblr and posting JPEGs directly from the RX1 via my phone or an iPad rather than running the bulk of them through Lightroom, onto Flickr and then on the blog (really this is just a matter of time, stay tuned, and those readers who have experience with tumblr, cloud image storage and editing, etc, etc, please contact me, I want to pick your brain).Put simply, I capture more spontaneous and beautiful “moments” than I might have otherwise. Photography is very much an exercise in “f/8 and be there,” and the RX1 is my go-to “be there” camera.
The family camera
I mentioned earlier that I justified the purchase of the RX1 partly as a camera to be used to document the family moments into which a DSLR doesn’t neatly fit. Over the past year I’ve collected thousands and thousands of family images with the RX1. The cold hard truth is that many of those photos could be better if I’d taken a full DSLR kit with me to the park or the beach or the grocery store each time. The RX1 is a difficult camera to use on a toddler (or any moving subject for that matter); autofocus isn’t as fast as a professional DSLR, it’s difficult to perfectly compose via an LCD (especially in bright sunlight), but despite these shortcomings, it’s been an incredibly useful family camera. There are simply so many beautiful moments where I had the RX1 over my shoulder, ready to go that whatever difficulties exist relative to a DSLR, those pale in comparison to the power of it’s convenience. The best camera is the one in your hand.
Where to go from here.
So what is the value of these RX1 going forward, especially in a world of the A7/r and it’s yet-to-be-born siblings without an EVF and a pancake lens? Frankly, at its current price (which is quite fair when you consider the value of the the body and the lens) I see precious little room for an independent offering versus a mirrorless, interchangeable lens system with the same image quality in a package just as small. That doesn’t mean Sony won’t make an RX2 or an RX1 Mark II (have a look at it’s other product lines to see how many SKUs are maintained despite low demand). Instead, I see the RX1 as a bridge that needed to exist for engineers, managers, and the market to make it to the A7/r and it’s descendants.A Facebook friend recently paid me a great compliment; he said something like, “Justin, via your blog, you’ve sold a ton of RX1 cameras.” Indeed, despite my efforts not to be a salesman, I think he’s right: I have and would continue to recommend this camera.The true value of the RX1 going forward is for those of us who have the thing on our shoulders; and yes, if you have an investment in and a love for a DSLR system, there’s still tremendous value in getting one, slinging it over your shoulder, and heading out into the wide, bright world; A7/r or no, this is just an unbelievably capable camera.
CHINESE RESURRECTIONISTS AT WAIKUMETE.
DISINTERMENT OF CORPSES.
A GRUESOME SPECTACLE.
Time, 5.30 a.m., on a bitterly cold morning, in Waikumete Cemetery. Half-frozen, a pressman and a photographer attached to the staff of the "Graphic" make their way from the sexton's house to the furthermost corner of the cemetery, where is situated the section for Chinese and Atheists and aliens unprovided for elsewhere. A noise of hammering comes from the section, which is a good half-mile from the Anglican and Presbyterian allotments, and on arrival work found to be in full operation. The reception of our reporter and his photographic confrere is the reverse of friendly, and an immediate wrangle ensues amongst the gravediggers, evidently on the subject of the camera fiend's presence. A Chinese halfcaste European insists on their instant ejectment. The sexton, however, who has been handed proper credentials, proves a firm friend, and insists that he, and not any Chinaman, or half-caste Chinaman, is in change of the cemetery, and that he has his instructions. Things then calm down a trifle, but the work is resumed amidst much grumbling, and many vindictive and malignant glances are cast at the camera, and muttered curses uttered at the photographer as he dodges round looking for a chance shot. Once, indeed, when the shutter clicks, a furious celestial raises his pick in menace, and mutters a threat to do for the intruders, but he thinks better of it, and at the intervention of the European coffinmaker a truce is declared until arrival of "the boss." That individual presently arrives. He scans the permit; gloomily enough, and bids that the photos be taken forthwith, and the photographer and pressman depart. It toeing pointed out that there is no picture yet to take, and seeing that bluff has no effect, all active opposition as at once and finally dropped, and no difficulty put in the way of obtaining pictures or witnessing the proceedings save in giving mendacious information, lighting fires to obscure the graves with smoke, and endeavouring to tire out the patience of the reporters, etc.
By ten o'clock four graves, are opened, but owing to the non-arrival of some solder and zinc from Auckland it, is decided to open only two coffins on this occasion. The first of these contained the corpse of one Kong Shang, who died in 1891, a young Celestial of 36. It was thought that there would be nothing but dry bones there, but the stiff white clay is evidently a preservative, for when the coffin, which is full of water, is opened, it is seen that the bones have a decided covering of what had once been flesh and though drenched in carbolic acid a sickening odour makes itself felt at intervals. Directly an attempt is made to stir the body it all falls to pieces, the decomposed flesh falling off in almost imperceptible flakes, which had doubtless been dust had the grave been dry. Very carefully the impassive Chinaman in the grave rinses and unconcernedly places on a sieve a thigh bone, then some ribs, and a skull, followed by the rest of the bones, minute search, indescribable in print, being made for the smaller bones and joints. It is an intensely gruesome spectacle, and the horror is added to by the indifference to sight and smell or sentiment evinced by the Celestial workmen. The venerable clerk, a fine old fellow, with the face of an ascetic and a student, carefully tallies the bones which, having been rescoured in a large white tub, are finally dried and wrapped up, each duly docketed by the methodical old gentleman, who is evidently a most conscientious and probably deeply religious man. He, too, is fastidiously clean, and does not, one notes, eat as the others do in the midst of their noisome labours. The next body is that of a man who must have been of exceptional stature and weight for a Chinaman, and who has been dead but two years and a-half. There is much difficulty in getting this coffin to the surface, and the opening thereof, and the awful stench which completely dominated all disinfectants when the body was removed to the zinc one prepared by the European tinsmith beggars description, and may be left to the imagination. None of those whose duty called them to be present are likely to forget the experience, or to desire a renewal of the same. The soldering having been completed, it must be admitted no effluvia was discernable. The zinc coffin was then put in a rude case and packed in sawdust ready for shipment. There is no reason to think the zinc coffins will not prove effective and inoffensive under ordinary ciroumstances, and careful usage, but a fall or any accident in loading would, one imagines, have very disastrous effects. The work ceased at noon to-day. Mr Winstanley, Government Sanitary Inspector, is present, and looks after his work in so thorough a manner that no fears need be entertained by settlers or the general public. The pictures secured by the "Graphic" protographer are of a unique nature and the most gruesome details having been omitted, are quite without offence. They will be published on Wednesday.
The custom of the Chinese at home is to disinter bodies after seven years, and place the main bones in a large jar alongside the grave. It is in order to forward the bones to China for relatives to do this that the present exporting of remains is undertaken.
paperspast.natlib.govt.nz/newspapers/AS19020929.2.45
THE CHINESE CORPSES
The disinterment of the bodies of the Chinese from cemeteries throughout the colony during last, and the early part of the present month excited a good deal of interest. In Greymouth nearly 200 bodies were "resurrected" and stored in a shed in the cemetery, much to the disgust of the residents, who unsuccessfully protested against the bodies being allowed to remain above ground until the arrival of the Ventnor. The expenses of the removal of the dead Chinese to their native land, where alone their spirits could find perfect peace, was borne by their friends, the undertaking being so costly that, only the wealthier relatives could afford the expenditure, many hundreds of unhappy Celestials being obliged "to lie in cold corruption and to rot" in the cemeteries of the "foreign devil."
The exhumation of all the bodies was carried out by the one party of "resurrectionists," Chinese with a half-caste leader and a European plumber. The Chinamen carried out their gruesome work with the utmost indifference, knocking off to eat their meals immediately after handling the bodies without a thought of nauseation.
Some bodies had been interred about twenty years ago, others within the last year. In the case of those which had been reduced to skeletons the bones were carefully sorted, and packed in boxes ready for shipment. In other cases the flesh had reached an advanced stage of putrefaction, and in these the bones were stripped and similarly, treated to the skeletons of older bodies. When the bodies were still whole they were packed in air-tight coffins, soldered down, and labelled with the name of the departed.
In all eleven corpses were taken from their graves at Waikumete. These were not shipped on the Ventnor at Auckland, but were taken down the coast in smaller vessels to Wellington, and there transhipped to the Ventnor.
The Chinese in Auckland were excited on the receipt of the news of the foundering, but when questioned as to what, according to Confucianism, would become of the spirits of the sunken Celestials, they professed ignorance.
paperspast.natlib.govt.nz/newspapers/AS19021029.2.54.5
LOSS OF THE VENTNOR.
FOUNDERED NEAR HOKIANGA.
BOAT AND CREW MISSING.
HOKIANGA, October 29.
The steamer Ventnor, which left Wellington for Hongkong on Sunday, foundered off the Hokianga Bar last night at about a quarter to nine.
The Ventnor left Wellington, as stated, on Sunday, with 500 Chinese bodies and 6400 tons of coal. She was owned by Gow, Harrison and Co., of Glasgow, her port of register, and was captained by H. G. Ferry. Before she had been long out, at forty minutes after midnight on Sunday, a shock which shook the vessel from stem to stern made manifest to everyone aboard that the steamer had struck a rock, a subsequent investigation showing that the reef hit was to the southward of Cape Egmont.
The engines were at once reversed, and in a short time the vessel managed to get off. The wells were then sounded, and it was found that the vessel was making water in No. 1 hold.
The vessel was headed off shore to a safe distance, and then proceeded up the coast.
Meanwhile, the steam pumps were got to work, but from the first it was found that they were unequal to the task of coping with the inflow, and gradually the water gained, rising higher and higher in the hold.
On Tuesday morning it was found that the ballast tanks in the peak were full, putting the steamer down by the head, and making it evident that she had but a short time to float.
In the evening her bow was so far under water that she became unmanageable, and it was seen that she was gradually sinking, despite every effort that could be made.
At about 9 p.m. it became evident that the vessel was going down fast, and all hands were ordered to the boats.
These were launched by their respective crews, who immediately pulled away from the sides of the doomed vessel.
Hardly had they reached a safe distance when the vessel's stern rose in the air, and she sank, bow first.
The Hokianga Heads light was seen at a distance of about ten miles, and the boats pulled in the direction of the light.
At daylight this morning two boats arrived on the Omapere Beach, bearing fourteen of the crew, including the chief mate, John Cameron, the second and third engineers, D. Bailee and K. Muir, and two cooks, and a messman.
Mr Martin, harbourmaster, has taken the small steamer Energy out off Whangape to pick up two more boats which were sighted from the pilot station. One of these was picked up at 10 o'clock, but the other had not been reached at the time of wiring, 10.30 a.m.
Besides her crew of 31 persons, including five Chinese, the Ventnor had six Chinamen as passengers. Of the coffins 489 were insured in the Alliance Company for £5490. The fungus was insured for about £320 in various offices. She was under the charge of Captain H. Ferry, who has been seventeen years in the employment of the same company. The steamer was under charter to W. Scott Fell and Co., of Sydney, contractors. Messrs John Mill and Co., of Dunedin and Wellington, were the colonial agents.
Of the coffins 489 were shipped by the Chong Shin Tong Society, which is a branch of the big society in China called the Tai Chuen. The other ten coffins were shipped by Yei Chong, of Manners-street, and did not belong to any society.
The Ventnor's crew numbered thirty-one, and those on board included nine Chinese body attendants. These attendants of the dead are old and decrepit Chinamen, who are being sent home to China by the Chong Shin Tong, and given sufficient money to keep them from work for the remainder of their lives.
paperspast.natlib.govt.nz/newspapers/AS19021030.2.87
SS Ventnor with details on final voyage:
en.wikipedia.org/wiki/SS_Ventnor
Plot 75: Ah Chee George (6) 18/5/1894 – unmarked
* disinterred to send to China
Patron of Art Homage to Napoléon Bonaparte Limited Edition 4810 Fountain Pen M
CAD$4,200.00 plus 13% HST.
Napoléon is mainly remembered for his military achievements, but he was a true patron of the arts. His glory lives on in the great ‘architecture parlante’ style of the famous Parisian structures built during his reign. In addition to architecture, other arts such as painting, sculpture and the decorative arts also blossomed under his leadership.
The overall design of the pen is inspired by the neoclassic style. The pattern of golden bees on dark blue lacquer is inspired by Napoléon’s throne in Fontainebleau, and the sword-shaped clip bears the Napoléonic “N”. The engravings on the cap top – a laurel wreath, imperial crown and an eagle – refer to Napoléon’s coronation insignia. The clip end is decorated with a red stone recalling the coronation ring of Napoleon’s wife Joséphine.The cap is crowned by the Montblanc Emblem in precious resin.
In homage to Napoléon Bonaparte, the handcrafted 18kt solid gold nib bears a portrait of Napoléon with the typical bicorn.
Golden Bees importance: CLICK on links to see his Golden Bee images. *********
www.geriwalton.com/the-importance-of-bees-to-napoleon-bon...
www.hhantiquejewelry.com/napoleon-bees-jewelry-tomb-child...
The Importance of Bees to Napoleon Bonaparte
By Geri Walton | February 8, 2019 | 1
The importance of bees to Napoleon Bonaparte became obvious when he decided to adopt this ancient symbol older than the fleur-de-lys. Supposedly, when Napoleon thought about wearing the imperial purple, he decided to adopt the bee based on the following story:
“It was a custom in France, during its early and barbarous ages, that whenever a monarch died, his horse and page were killed and buried with their master, that they might be in ready attendance upon him in the next world. In the year 1658, the tomb of Childeric, the father of Clovis, was discovered [by the archeologist Jean-Jacques Chifflet*], and within it were found the skeleton of a man that of a horse, and part of the skeleton of a youth, concluded to be the remains of Childeric and his companions … a gold signet ring was taken from the finger of the large skeleton; upon it appeared an engraved head, having long hair flowing over the shoulders, and around it the words, ‘Childerici Regis;’ several buckles, massy gold bracelets and a gold head of an ox, supposed to be an image of the idolatrous worship of the deceased. … [In addition,] on further search in the tomb were found a purse, containing a hundred pieces of gold and two hundred pieces of silver, bearing the heads of different emperors of France; a crystal ball or orb, a pike, a battleaxe, the hand, mounting, and blade of a sword; gold tablets and style; the bit and part of the harness of a horse; fragments of a dress or robe; and more than three hundred little bees of the purest gold, their wings behind inlaid with a red stone like cornelian.”[1]
When Childeric’s tomb was discovered in 1653, Louis XIV received the treasure, but he wasn’t impressed and stored it at what later became the Bibliothèque Nationale de France. When Napoleon came to power, his advisor, Jean-Jacques-Régis de Cambacérès, suggested he adopt the bee as his personal symbol and mentioned the treasure of Childeric. Napoleon took his advisor’s advice after learning that Childeric had lived between 437 and 481 and that he founded the Merovingian dynasty. Moreover, Napoleon learned that Childeric’s symbol of the bee preceded the fleur-de-lis adopted by his son Clovis.
Besides being associated with the Merovingians, Napoleon also wanted to be associated with the Carolingians, a dynasty that reached its peak in AD 800 with the crowning of Charlemagne as the first Emperor of Romans. The spread eagle that Napoleon used on his shield came from the Carolingian founder Charlemagne and was suggested for use by by the Council Commission, made up from members of the Council of State, whose job was to oversee the coronation of Napoleon and his Empress, Josephine. They soon determined:
“Even if the arms of Charlemagne were not accurately known, it could still be pointed out … that in the time of Louis le Débonnaire, and doubtless earlier, ‘an eagle of metal was placed in the western portion of the Imperial palace at Aix, and it was always the custom of those who got possession of the palace, first of all to seize upon this eagle.’”[2]
It was also pointed out that the fleur de lys would have been inappropriate alongside the Carolingian symbol of the eagle, another reason for selecting the bee. Moreover, some in the Council Commission erroneously suggested that the fleur-de-lys were just badly drawn bees. One twentieth-century historian noted:
“The fleurs de lys which had been sown broadcast on the carpets, hangings, and insignia of the Capetian kings would have been scarcely suitable to match with the eagles. Besides, they belonged to the old order of things which was to be forgotten. It was necessary to choose some plant or animal from the heraldic flora or fauna which could be adopted in the place of the fleur de lys, and was yet known to French historical tradition. As nothing suitable of this kind could be found in the Age of Charlemagne, it was necessary to search farther back. … [It was also] remembered that, during the sitting of the National Convention on the 3rd of Brumaire of the year IV, Daubermesnil, speaking in the name of the Committee of Public Instruction, had proposed that the emblem of the State should be a hive swarming with bees, and that it should be placed upon the front of every national building. To which Citizen Barallion had indeed objected that ‘bees were cognizance of several Kings of France of the first dynasty, such as Childebert and Chileric. Besides,’ he added, ‘bees can never be the emblem of the Republic, for is it not well known that they all pay court to a queen?’ The convention was struck with this merry quip, and rejected the harmless suggestion of Daubermesnil.”[3]
Napoleon apparently ignored the idea that bees might be related to a queen and found bees an appropriate symbol for his empire. He knew illusion was power and that the bee had greater antiquity than the fleur-de-lis. He also thought because the bees were a symbol of the Merovingian kings, it would give him added legitimacy to rule as Emperor. Thus, when he was crowned, the importance of bees to Napoleon was obvious as he made sure bees appeared prominently on his coronation robes.
To aid in this, he used the best-known miniature painter Jean-Baptiste Isabey, who also happened to be a close friend of the Bonaparte family. Isabey decided the bee found with Childeric’s remains lacked detail and was too small and dense. Therefore, he developed a new larger bee created volant en arrière, or in other words, when viewed from the top its wings were partially opened.
Isabey’s bee was the one used to embellish the coronation mantles. Embroidery of the bees on the mantles cost 15,000 francs and were accomplished by Picot, embroiderer to the Emperor and the Empress. One historian gave the details of Napoleon’s mantle, stating:
“The Imperial mantle of purple velvet powdered with golden bees; in the embroidery are interlaced branches of olive, laurel and oak surrounding the letter N. The lining, the border, and the tippet are of ermine. The mantle, open on the left side, allows the sword to be seen, which is sustained by a scarf of white satin embroidered and trimmed with a cord of gold; the long robe is of white satin embroidered with gold on all the seams, the hem of the robe embroidered with a cord of gold.”[4]
The Empress was also resplendent and likewise had a mantle of purple velvet powdered with golden bees, as did the French princes. Pages wore green coats with shoulder-knots of green silk embroidered with eagles at each end and powdered with bees. Moreover, golden bees also appeared on the square purple velvet cushion that held Charlemagne’s crown. (To see the only known embroidered bee that survives, click here).
Despite the importance of bees to Napoleon, he never gave an Order in Council or officially announced the adoption of it. He also never gave a formal explanation for why he chose the bee. He did, however, make sure that the bee was an important symbol at his imperial court after he was crowned. Bees could be found embellishing clothing and fabric and were incorporated into ceramics, furniture, glass, and metalwork. One historian also reported:
“He [Napoleon] sprinkled bees liberally on his ensign as General-in-Chief, he introduced them on the borders of the Army colours, he adorned the upper portion of the escutcheons of the Grand Dignitaries and good towns with them, he powdered them over his own carpets and hangings.”[5]
The bee was so important to Napoleon, it was exclusively reserved for the imperial family, and not even dukes could use it. However, on 19 May 1802, Napoleon established a reward for civil and military merit called the Légion d’Honneur and to indicate the importance of the bee, he used a version in the medal. This was, and is, France’s highest honor, and although there were critics who thought of it as a bauble, Napoleon knew its value, stating, “It is with baubles that men are led.”[6]
After the Treaty of Fontainebleau and his exile to Elba, he designed his own flag for Elba and once again used the bee that he so cherished. Perhaps, he did so because it linked him to the imperial mantle. The flag that floated over the island had a white background with a diagonal red stripe and three golden bees in the stripe. Gloria Peria, director of the Historical Archives of the Communes of the Island of Elba, notes:
“Having chosen to give the Island of Elba three bees meant giving the island a sense of unity under his reign, even though from an administrative point of view it was divided into several Municipalities … Napoleon’s flag of Elba was immediately a great success, so much so that, according to Pons de l’Herault in his Souvenirs et Anecdotes de l’Ile d’Elbe, even the Barbaresque pirates greeted it, because they saw in it the symbol of their war hero, Napoleon, in person, as they sailed the Tyrrhenian Sea.”[7]
When Louis XVIII came to power in 1815, he methodically replaced or destroyed Napoleon’s bee with the fleur-de-lys. Ultimately, few bees from Napoleon’s reign survived Louis’ eradication. The bee seemed to all but disappear until Napoleon’s remains were returned in 1840. One newspaper reported that the car carrying Napoleon’s body was “truly magnificent,” and that on the pedestal, “on both sides hung two velvet imperial mantles, sprinkled with bees.”[8]
*Although Chifflet thought what he discovered was bees, some scholars have suggested they were cicadas, a symbol that meant both death and resurrection to the Merovingians. However, other scholars believe they were flies because flies were found on the coats of arms of families from the territories of Venice and Flanders that were once controlled by the Merovingians. If they were flies, Napoleon’s enemies would have likely got a chuckle thinking he was covered with flies rather than bees.
References:
[1] W. H. Ireland, The Napoleon anecdotes, ed. by W.H. Ireland (London: C.S. Arnold, 1822), p. 18.
[2] F. Masson, Napoleon and His Coronation, (Philadelphia: J.B. Lippincott Company, 1907), p. 97.
[3] Ibid., p. 98–99.
[4] Ibid, p. 314.
[5] Ibid., p. 99.
[6] B. Farwell, The Encyclopedia of Nineteenth-century Land Warfare: An Illustrated World View (New York: W.W. Norton, 2001), p. 488.
[7] “History of the flag of the Island of Elba,” Info Elba, accessed November 16, 2018, www.infoelba.com/discovering-elba/curious-facts/the-flag-...
[8] Downpatrick Recorder, “Funeral of Napoleon,” December 26, 1840, p. 1.
Gandhara is the name given to an ancient region or province invaded in 326 B.C. by Alexander the Great, who took Charsadda (ancient Puskalavati) near present-day Peshawar (ancient Purusapura) and then marched eastward across the Indus into the Punjab as far as the Beas river (ancient Vipasa). Gandhara constituted the undulating plains, irrigated by the Kabul River from the Khyber Pass area, the contemporary boundary between Pakistan and Afganistan, down to the Indus River and southward towards the Murree hills and Taxila (ancient Taksasila), near Pakistan"s present capital, Islamabad. Its art, however, during the first centuries of the Christian era, had adopted a substantially larger area, together with the upper stretches of the Kabul River, the valley of Kabul itself, and ancient Kapisa, as well as Swat and Buner towards the north.
A great deal of Gandhara sculptures has survived dating from the first to probably as late as the sixth or even the seventh century but in a remarkably homogeneous style. Most of the arts were almost always in a blue-gray mica schist, though sometimes in a green phyllite or in stucco, or very rarely in terracotta. Because of the appeal of its Western classical aesthetic for the British rulers of India, schooled to admire all things Greek and Roman, a great deal found its way into private hands or the shelter of museums.
Gandhara sculpture primarily comprised Buddhist monastic establishments. These monasteries provided a never-ending gallery for sculptured reliefs of the Buddha and Bodhisattvas. The Gandhara stupas were comparatively magnified and more intricate, but the most remarkable feature, which distinguished the Gandhara stupas from the pervious styles were hugely tiered umbrellas at its peak, almost soaring over the total structure. The abundance of Gandharan sculpture was an art, which originated with foreign artisans.
In the excavation among the varied miscellany of small bronze figures, though not often like Alexandrian imports, four or five Buddhist bronzes are very late in date. These further illustrate the aura of the Gandhara art. Relics of mural paintings though have been discovered, yet the only substantial body of painting, in Bamiyan, is moderately late, and much of it belongs to an Iranian or central Asian rather than an Indian context. Non-narrative themes and architectural ornament were omnipresent at that time. Mythical figures and animals such as atlantes, tritons, dragons, and sea serpents derive from the same source, although there is the occasional high-backed, stylized creature associated with the Central Asian animal style. Moldings and cornices are decorated mostly with acanthus, laurel, and vine, though sometimes with motifs of Indian, and occasionally ultimately western Asian, origin: stepped merlons, lion heads, vedikas, and lotus petals. It is worth noting that architectural elements such as pillars, gable ends, and domes as represented in the reliefs tend to follow the Indian forms
.
Gandhara became roughly a Holy Land of Buddhism and excluding a handful of Hindu images, sculpture took the form either of Buddhist sect objects, Buddha and Bodhisattvas, or of architectural embellishment for Buddhist monasteries. The more metaphorical kinds are demonstrated by small votive stupas, and bases teeming with stucco images and figurines that have lasted at Jaulian and Mora Moradu, outpost monasteries in the hills around Taxila. Hadda, near the present town of Jalalabad, has created some groups in stucco of an almost rococo while more latest works of art in baked clay, with strong Hellenistic influence, have been revealed there, in what sums up as tiny chapels. It is not known exactly why stucco, an imported Alexandrian modus operandi, was used. It is true that grey schist is not found near Taxila, however other stones are available, and in opposition to the ease of operating with stucco, predominantly the artistic effects which can be achieved, must be set with its impermanence- fresh deposits frequently had to be applied. Excluding possibly at Taxila, its use emerges to have been a late expansion.
Architectural fundamentals of the Gandhara art, like pillars, gable ends and domes as showcased in the reliefs, were inclined to follow Indian outlines, but the pilaster with capital of Corinthian type, abounds and in one-palace scene Persepolitan columns go along with Roman coffered ceilings. The so-called Shrine of the Double-Headed Eagle at Sirkap, in actuality a stupa pedestal, well demonstrates this enlightening eclecticism- the double-headed bird on top of the chaitya arch is an insignia of Scythian origin, which appears as a Byzantine motif and materialises much later in South India as the ga1J.qa-bheru1J.qa in addition to atop European armorial bearings.
In Gandhara art the descriptive friezes were all but invariably Buddhist, and hence Indian in substance- one depicted a horse on wheels nearing a doorway, which might have represented the Trojan horse affair, but this is under scan. The Dioscuri, Castor and Pollux, familiar from the previous Greek-based coinage of the region, appeared once or twice as standing figurines, presumably because as a pair, they tallied an Indian mithuna couple. There were also female statuettes, corresponding to city goddesses. Though figures from Butkara, near Saidan Sharif in Swat, were noticeably more Indian in physical type, and Indian motifs were in abundance there. Sculpture was, in the main, Hellenistic or Roman, and the art of Gandhara was indeed "the easternmost appearance of the art of the Roman Empire, especially in its late and provincial manifestations". Furthermore, naturalistic portrait heads, one of the high-points of Roman sculpture, were all but missing in Gandhara, in spite of the episodic separated head, probably that of a donor, with a discernible feeling of uniqueness. Some constitutions and poses matched those from western Asia and the Roman world; like the manner in which a figure in a recurrently instanced scene from the Dipankara jataka had prostrated himself before the future Buddha, is reverberated in the pose of the defeated before the defeater on a Trojanic frieze on the Arch of Constantine and in later illustrations of the admiration of the divinised emperor. One singular recurrently occurring muscular male figure, hand on sword, witnessed in three-quarters view from the backside, has been adopted from western classical sculpture. On occasions standing figures, even the Buddha, deceived the elusive stylistic actions of the Roman sculptor, seeking to express majestas. The drapery was fundamentally Western- the folds and volume of dangling garments were carved with realness and gusto- but it was mainly the persistent endeavours at illusionism, though frequently obscured by unrefined carving, which earmarked the Gandhara sculpture as based on a western classical visual impact.
The distinguishing Gandhara sculpture, of which hundreds if not thousands of instances have outlived, is the standing or seated Buddha. This flawlessly reproduces the necessary nature of Gandhara art, in which a religious and an artistic constituent, drawn from widely varied cultures have been bonded. The iconography is purely Indian. The seated Buddha is mostly cross-legged in the established Indian manner. However, forthcoming generations, habituated to think of the Buddha as a monk, and unable to picture him ever possessing long hair or donning a turban, came to deduce the chigon as a "cranial protuberance", singular to Buddha. But Buddha is never depicted with a shaved head, as are the Sangha, the monks; his short hair is clothed either in waves or in taut curls over his whole head. The extended ears are merely due to the downward thrust of the heavy ear-rings worn by a prince or magnate; the distortion of the ear-lobes is especially visible in Buddha, who, in Gandhara, never wore ear-rings or ornaments of any kind. As Foucher puts it, the Gandhara Buddha is at a time a monk without shaving and a prince stripped off jewellery.
The western classical factor rests in the style, in the handling of the robe, and in the physiognomy of Buddha. The cloak, which covers all but the appendages (though the right shoulder is often bared), is dealt like in Greek and Roman sculptures; the heavy folds are given a plastic flair of their own, and only in poorer or later works do they deteriorate into indented lines, fairly a return to standard Indian practice. The "western" treatment has caused Buddha"s garment to be misidentified for a toga; but a toga is semicircular, while, Buddha wore a basic, rectangular piece of cloth, i.e., the samghiifi, a monk"s upper garment. The head gradually swerves towards a hieratic stylisation, but at its best, it is naturalistic and almost positively based on the Greek Apollo, undoubtedly in Hellenistic or Roman copies.
Gandhara art also had developed at least two species of image, i.e. not part of the frieze, in which Buddha is the fundamental figure of an event in his life, distinguished by accompanying figures and a detailed mise-en-scene. Perhaps the most remarkable amongst these is the Visit to the Indrasala Cave, of which the supreme example is dated in the year 89, almost unquestionably of the Kanishka period. Indra and his harpist are depicted on their visit in it. The small statuettes of the visitors emerge below, an elephant describing Indra. The more general among these detailed images, of which approximately 30 instances are known, is presumably related with the Great Miracle of Sravasti. In one such example, one of the adjoining Bodhisattvas is distinguished as Avalokiteshwara by the tiny seated Buddha in his headgear. Other features of these images include the unreal species of tree above Buddha, the spiky lotus upon which he sits, and the effortlessly identifiable figurines of Indra and Brahma on both sides.
Another important aspect of the Gandhara art was the coins of the Graeco-Bactrians. The coins of the Graeco-Bactrians - on the Greek metrological standard, equals the finest Attic examples and of the Indo-Greek kings, which have until lately served as the only instances of Greek art found in the subcontinent. The legendary silver double decadrachmas of Amyntas, possibly a remembrance issue, are the biggest "Greek" coins ever minted, the largest cast in gold, is the exceptional decadrachma of the same king in the Bibliotheque Nationale, with the Dioscuri on the inverse. Otherwise, there was scanty evidence until recently of Greek or Hellenistic influences in Gandhara. A manifestation of Greek metropolitan planning is furnished by the rectilinear layouts of two cities of the 1st centuries B.C./A.D.--Sirkap at Taxila and Shaikhan Pheri at Charsadda. Remains of the temple at Jandial, also at Taxila and presumably dating back to 1st century B.C., also includes Greek characteristics- remarkably the huge base mouldings and the Ionic capitals of the colossal portico and antechamber columns. In contrast, the columns or pilasters on the immeasurable Gandhara friezes (when they are not in a Indian style), are consistently coronated by Indo-Corinthian capitals, the local version of the Corinthian capital- a certain sign of a comparatively later date.
The notable Begram hoard confirms articulately to the number and multiplicity of origin of the foreign artefacts imported into Gandhara. This further illustrates the foreign influence in the Gandhara art. Parallel hoards have been found in peninsular India, especially in Kolhapur in Maharashtra, but the imported wares are sternly from the Roman world. At Begram the ancient Kapisa, near Kabul, there are bronzes, possibly of Alexandrian manufacture, in close proximity with emblemata (plaster discs, certainly meant as moulds for local silversmiths), bearing reliefs in the purest classical vein, Chinese lacquers and Roman glass. The hoard was possibly sealed in mid-3rd century, when some of the subjects may have been approximately 200 years old "antiques", frequently themselves replicates of classical Greek objects. The plentiful ivories, consisting in the central of chest and throne facings, engraved in a number of varied relief techniques, were credibly developed somewhere between Mathura and coastal Andhra. Some are of unrivalled beauty. Even though a few secluded instances of early Indian ivory carving have outlived, including the legendary mirror handle from Pompeii, the Begram ivories are the only substantial collection known until moderately in present times of what must always have been a widespread craft. Other sites, particularly Taxila, have generated great many instances of such imports, some from India, some, like the appealing tiny bronze figure of Harpocrates, undoubtedly from Alexandria. Further cultural influences are authenticated by the Scytho Sarmatian jewellery, with its characteristic high-backed carnivores, and by a statue of St. Peter. But all this should not cloud the all-important truth that the immediately identifiable Gandhara style was the prevailing form of artistic manifestation throughout the expanse for several centuries, and the magnitude of its influence on the art of central Asia and China and as far as Japan, allows no doubt about its integrity and vitality.
In the Gandhara art early Buddhist iconography drew heavily on traditional sources, incorporating Hindu gods and goddesses into a Buddhist pantheon and adapting old folk tales to Buddhist religious purposes. Kubera and Harm are probably the best-known examples of this process.
Five dated idols from Gandhara art though exist, however the hitch remains that the era is never distinguished. The dates are in figures under 100 or else in 300s. Moreover one of the higher numbers are debatable, besides, the image upon which it is engraved is not in the conventional Andhra style. The two low-number-dated idols are the most sophisticated and the least injured. Their pattern is classical Gandhara. The most undemanding rendition of their dates relates them to Kanishka and 78 A.D. is assumed as the commencement of his era. They both fall in the second half of the 2nd century A.D. and equally later, if a later date is necessitated for the beginning of Kanishka`s time. This calculation nearly parallels numismatics and archaeological evidences. The application of other eras, like the Vikrama (base date- 58 B.C.) and the Saka (base date- 78 A.D.), would place them much later. The badly battered figurines portray standing Buddhas, without a head of its own, but both on original figured plinths. They come to view as depicting the classical Gandhara style; decision regarding where to place these two dated Buddhas, both standing, must remain knotty till more evidence comes out as to how late the classical Gandhara panache had continued.
Methodical study of the Gandhara art, and specifically about its origins and expansion, is befuddled with numerous problems, not at least of which is the inordinately complex history and culture of the province. It is one of the great ethnical crossroads of the world simultaneously being in the path of all the intrusions of India for over three millennia. Bussagli has rightly remarked, `More than any other Indian region, Gandhara was a participant in the political and cultural events that concerned the rest of the Asian continent`.
However, Systematic study of the art of Gandhara, and particularly of its origins and development, is bedeviled by many problems, not the least of which is the extraordinarily complex history and culture of the region.
In spite of the labours of many scholars over the past hundred and fifty years, the answers to some of the most important questions, such as the number of centuries spanned by the art of Gandhara, still await, fresh archaeological, inscriptional, or numismatic evidence.
Recently I’ve gotten more interested in shooting the human aspect of railroading. Here our conductor can be seen riding his power shortly after completing his inspection papers for the day, untying from the PGR boxcar, and unlocking the gate to let their power slip out. You can see in his face that he has years of railroad experience, a certified HOSS. And with that he learned that the best way his job ought to be done is wisely and methodically- which is to say slow but thorough. Also of interest is the ride itself, an EMD CF7 coming off the Santa Fe, rebuilt from an F7 when the company was in dire need of switching power. In some cases, with a 75 year old power plant behind the hood doors but still turning and making money for this little outfit nestled in the Pajaro Valley.