View allAll Photos Tagged fallback
"Unfathomable" 480 units
In my hand. (This is quite large, even our of 1.0" wide paper.)
This is a rough prototype of a rather ambitious project I have had in mind for a year or two.
The initial project I had in mind was a compound of 15 truncated octahedra, but 360 units into that project I realized I made a mistake in the symmetry for the individual frames- each frame in a 15 truncated octahedra compound would have to representative of two 2-fold axes of an icosahedron, but the symmetry I had arranged the base around was for a 30 compound- 2 frames together would be required to make the above described symmetry.
So consider this a fallback project.
What I ended up creating here is a woven solid from a 360 unit base. It is difficult to describe geometrically, which is why I opted not to attempt something cumbersome in naming.
The weaving here actually wasn't too bad, at least for me, though assembly was a bit challenging.
I still have my sights set on making the original compound I had in mind, or possibly even keeping the symmetry of the base here and opting for a doubled frame constructions for the representation of each pair of opposite two-fold axes.
At this point, I suppose it would be fair to call this the most complicated wireframe ever designed, although honestly, it didn't seem that bad- perhaps my techniques for assembly have improved to such an extent as to make something like this fairly straightforward. ;)
Designed by me. (6 different paper proportions)
Folded out of copy paper.
Hunt Gift for Harvest of Souls, from Sept 23rd - Oct 31st!
The gift is available in the prize room after completing the hunt (instructions at event).
It includes Samhain and Halloween signs. Both come in black or cream colors. Each is 1 LI and swing on touch.
PBR/Fallback. Ad is PBR.
Copy/Mod/Original Mesh.
+++ DISCLAIMER +++
Nothing you see here is real, even though the conversion or the presented background story might be based on historical facts. BEWARE!
Some background:
The CAC Sabre, sometimes known as the Avon Sabre or CA-27, was an Australian variant of the North American Aviation F-86F Sabre fighter aircraft. In 1951, Commonwealth Aircraft Corporation obtained a license agreement to build the F-86F Sabre. In a major departure from the North American blueprint, it was decided that the CA-27 would be powered by a license-built version of the Rolls-Royce Avon R.A.7, rather than the General Electric J47. In theory, the Avon was capable of more than double the maximum thrust and double the thrust-to-weight ratio of the US engine. This necessitated a re-design of the fuselage, as the Avon was shorter, wider and lighter than the J47.
To accommodate the Avon, over 60 percent of the fuselage was altered and there was a 25 percent increase in the size of the air intake. Another major revision was in replacing the F-86F's six machine guns with two 30mm ADEN cannon, while other changes were also made to the cockpit and to provide an increased fuel capacity.
The prototype aircraft first flew on 3 August 1953. The production aircrafts' first deliveries to the Royal Australian Air Force began in 1954. The first batch of aircraft were powered by the Avon 20 engine and were designated the Sabre Mk 30. Between 1957 and 1958 this batch had the wing slats removed and were re-designated Sabre Mk 31. These Sabres were supplemented by 20 new-built aircraft. The last batch of aircraft were designated Sabre Mk 32 and used the Avon 26 engine, of which 69 were built up to 1961.
Beyond these land-based versions, an indigenous version for carrier operations had been developed and built in small numbers, too, the Sea Sabre Mk 40 and 41. The roots of this aircraft, which was rather a prestigious idea than a sensible project, could be traced back to the immediate post WWII era. A review by the Australian Government's Defence Committee recommended that the post-war forces of the RAN be structured around a Task Force incorporating multiple aircraft carriers. Initial plans were for three carriers, with two active and a third in reserve, although funding cuts led to the purchase of only two carriers in June 1947: Majestic and sister ship HMS Terrible, for the combined cost of AU£2.75 million, plus stores, fuel, and ammunition. As Terrible was the closer of the two ships to completion, she was finished without modification, and was commissioned into the RAN on 16 December 1948 as HMAS Sydney. Work progressed on Majestic at a slower rate, as she was upgraded with the latest technology and equipment. To cover Majestic's absence, the Colossus-class carrier HMS Vengeance was loaned to the RAN from 13 November 1952 until 12 August 1955.
Labour difficulties, late delivery of equipment, additional requirements for Australian operations, and the prioritization of merchant ships over naval construction delayed the completion of Majestic. Incorporation of new systems and enhancements caused the cost of the RAN carrier acquisition program to increase to AU£8.3 million. Construction and fitting out did not finish until October 1955. As the carrier neared completion, a commissioning crew was formed in Australia and first used to return Vengeance to the United Kingdom.
The completed carrier was commissioned into the RAN as HMAS Majestic on 26 October 1955, but only two days later, the ship was renamed Melbourne and recommissioned.
In the meantime, the rather political decision had been made to equip Melbourne with an indigenous jet-powered aircraft, replacing the piston-driven Hawker Fury that had been successfully operated from HMAS Sydney and HMAS Vengeance, so that the "new jet age" was even more recognizable. The choice fell on the CAC Sabre, certainly inspired by North American's successful contemporary development of the navalized FJ-2 Fury from the land-based F-86 Sabre. The CAC 27 was already a proven design, and with its more powerful Avon engine it even offered a better suitability for carrier operations than the FJ-2 with its rather weak J47 engine.
Work on this project, which was initially simply designated Sabre Mk 40, started in 1954, just when the first CAC 27's were delivered to operative RAAF units. While the navalized Avon Sabre differed outwardly only little from its land-based brethren, many details were changed and locally developed. Therefore, there was also, beyond the general outlines, little in common with the North American FJ-2 an -3 Fury.
Externally, a completely new wing with a folding mechanism was fitted. It was based on the F-86's so-called "6-3" wing, with a leading edge that was extended 6 inches at the root and 3 inches at the tip. This modification enhanced maneuverability at the expense of a small increase in landing speed due to deletion of the leading edge slats, a detail that was later introduced on the Sabre Mk 31, too. As a side benefit, the new wing leading edges without the slat mechanisms held extra fuel. However, the Mk 40's wing was different as camber was applied to the underside of the leading edge to improve low-speed handling for carrier operations. The wings were provided with four stations outboard of the landing gear wells for up to 1000 lb external loads on the inboard stations and 500 lb on the outboard stations.
Slightly larger stabilizers were fitted and the landing gear was strengthened, including a longer front wheel strut. The latter necessitated an enlarged front wheel well, so that the front leg’s attachment point had to be moved forward. A ventral launch cable hook was added under the wing roots and an external massive arrester hook under the rear fuselage.
Internally, systems were protected against salt and humidity and a Rolls-Royce Avon 211 turbojet was fitted, a downrated variant of the already navalized Avon 208 from the British DH Sea Vixen, but adapted to the different CAC 27 airframe and delivering 8.000 lbf (35.5 kN) thrust – slightly more than the engines of the land-based CAC Sabres, but also without an afterburner.
A single Mk 40 prototype was built from a new CAC 27 airframe taken directly from the production line in early 1955 and made its maiden flight on August 20th of the same year. In order to reflect its naval nature and its ancestry, this new CAC 27 variant was officially christened “Sea Sabre”.
Even though the modified machine handled well, and the new, cambered wing proved to be effective, many minor technical flaws were discovered and delayed the aircraft's development until 1957. These included the wing folding mechanism and the respective fuel plumbing connections, the landing gear, which had to be beefed up even more for hard carrier landings and the airframe’s structural strength for catapult launches, esp. around the ventral launch hook.
In the meantime, work on the land-based CAC 27 progressed in parallel, too, and innovations that led to the Mk 31 and 32 were also incorporated into the naval Mk 40, leading to the Sea Sabre Mk 41, which became the effective production aircraft. These updates included, among others, a detachable (but fixed) refueling probe under the starboard wing, two more pylons for light loads located under the wing roots and the capability to carry and deploy IR-guided AIM-9 Sidewinder air-to-air missiles, what significantly increased the Mk 41's efficiency as day fighter. With all these constant changes it took until April 1958 that the Sabre Mk 41, after a second prototype had been directly built to the new standard, was finally approved and cleared for production. Upon delivery, the RAN Sea Sabres carried a standard NATO paint scheme with Extra Dark Sea Grey upper surfaces and Sky undersides.
In the meantime, the political enthusiasm concerning the Australian carrier fleet had waned, so that only twenty-two aircraft were ordered. The reason behind this decision was that Australia’s carrier fleet and its capacity had become severely reduced: Following the first decommissioning of HMAS Sydney in 1958, Melbourne became the only aircraft carrier in Australian service, and she was unavailable to provide air cover for the RAN for up to four months in every year; this time was required for refits, refueling, personnel leave, and non-carrier duties, such as the transportation of troops or aircraft. Although one of the largest ships to serve in the RAN, Melbourne was one of the smallest carriers to operate in the post-World War II period, so that its contribution to military actions was rather limited. To make matters worse, a decision was made in 1959 to restrict Melbourne's role to helicopter operations only, rendering any carrier-based aircraft in Australian service obsolete. However, this decision was reversed shortly before its planned 1963 implementation, but Australia’s fleet of carrier-borne fixed-wing aircraft would not grow to proportions envisioned 10 years ago.
Nevertheless, on 10 November 1964, an AU£212 million increase in defense spending included the purchase of new aircraft for Melbourne. The RAN planned to acquire 14 Grumman S-2E Tracker anti-submarine aircraft and to modernize Melbourne to operate these. The acquisition of 18 new fighter-bombers was suggested (either Sea Sabre Mk 41s or the American Douglas A-4 Skyhawk), too, but these were dropped from the initial plan. A separate proposal to order 10 A-4G Skyhawks, a variant of the Skyhawk designed specifically for the RAN and optimized for air defense, was approved in 1965, but the new aircraft did not fly from Melbourne until the conclusion of her refit in 1969. This move, however, precluded the production of any new and further Sea Sabre.
At that time, the RAN Sea Sabres received a new livery in US Navy style, with upper surfaces in Light Gull Gray with white undersides. The CAC Sea Sabres remained the main day fighter and attack aircraft for the RAN, after the vintage Sea Furies had been retired in 1962. The other contemporary RAN fighter type in service, the Sea Venom FAW.53 all-weather fighter that had replaced the Furies, already showed its obsolescence.
In 1969, the RAN purchased another ten A-4G Skyhawks, primarily in order to replace the Sea Venoms on the carriers, instead of the proposed seventh and eighth Oberon-class submarines. These were operated together with the Sea Sabres in mixed units on board of Melbourne and from land bases, e.g. from NAS Nowra in New South Wales, where a number of Sea Sabres were also allocated to 724 Squadron for operational training.
Around 1970, Melbourne operated a standard air group of four jet aircraft, six Trackers, and ten Wessex helicopters until 1972, when the Wessexes were replaced with ten Westland Sea King anti-submarine warfare helicopters and the number of jet fighters doubled. Even though the A-4G’s more and more took over the operational duties on board of Melbourne, the Sea Sabres were still frequently deployed on the carrier, too, until the early Eighties, when both the Skyhawks and the Sea Sabres received once more a new camouflage, this time a wraparound scheme in two shades of grey, reflecting their primary airspace defense mission.
The CAC 27 Mk 41s’ last carrier operations took place in 1981 in the course of Melbourne’s involvements in two major exercises, Sea Hawk and Kangaroo 81, the ship’s final missions at sea. After Melbourne was decommissioned in 1984, the Fleet Air Arm ceased fixed-wing combat aircraft operation. This was the operational end of the Sabre Mk 41, which had reached the end of their airframe lifetime, and the Sea Sabre fleet had, during its career, severely suffered from accidents and losses: upon retirement, only eight of the original twenty-two aircraft still existed in flightworthy condition, so that the aircraft were all scrapped. The younger RAN A-4Gs were eventually sold to New Zealand, where they were kept in service until 2002.
General characteristics:
Crew: 1
Length: 37 ft 6 in (11.43 m)
Wingspan: 37 ft 1 in (11.3 m)
Height: 14 ft 5 in (4.39 m)
Wing area: 302.3 sq ft (28.1 m²)
Empty weight: 12,000 lb (5,443 kg)
Loaded weight: 16,000 lb (7,256 kg)
Max. takeoff weight: 21,210 lb (9,621 kg)
Powerplant:
1× Rolls-Royce Avon 208A turbojet engine with 8,200 lbf (36.44 kN)
Performance:
Maximum speed: 700 mph (1,100 km/h) (605 knots)
Range: 1,153 mi, (1,000 NM, 1,850 km)
Service ceiling: 52,000 ft (15,850 m)
Rate of climb: 12,000 ft/min at sea level (61 m/s)
Armament:
2× 30 mm ADEN cannons with 150 rounds per gun
5,300 lb (2,400 kg) of payload on six external hardpoints;
Bombs were usually mounted on outer two pylons as the mid pair were wet-plumbed pylons for
2× 200 gallons drop tanks, while the inner pair was usually occupied by a pair of AIM-9 Sidewinder
AAMs
A wide variety of bombs could be carried with maximum standard loadout being 2x 1,000 lb bombs
or 2x Matra pods with unguided SURA missiles plus 2 drop tanks for ground attacks, or 2x AIM-9 plus
two drop tanks as day fighter
The kit and its assembly:
This project was initially inspired by a set of decals from an ESCI A-4G which I had bought in a lot – I wondered if I could use it for a submission to the “In the navy” group build at whatifmodelers.com in early 2020. I considered an FJ-3M in Australian colors on this basis and had stashed away a Sword kit of that aircraft for this purpose. However, I had already built an FJ variant for the GB (a kitbashed mix of an F-86D and an FJ-4B in USMC colors), and was reluctant to add another Fury.
This spontaneously changed after (thanks to Corona virus quarantine…) I cleaned up one of my kit hoards and found a conversion set for a 1:72 CAC 27 from JAYS Model Kits which I had bought eons ago without a concrete plan. That was the eventual trigger to spin the RAN Fury idea further – why not a navalized version of the Avon Sabre for HMAS Melbourne?
The result is either another kitbash or a highly modified FJ-3M from Sword. The JAYS Model Kits set comes with a THICK sprue that carries two fuselage halves and an air intake, and it also offers a vacu canopy as a thin fallback option because the set is actually intended to be used together with a Hobby Craft F-86F.
While the parts, molded in a somewhat waxy and brittle styrene, look crude on the massive sprue, the fuselage halves come with very fine recessed engravings. And once you have cleaned the parts (NOTHING for people faint at heart, a mini drill with a saw blade is highly recommended), their fit is surprisingly good. The air intake was so exact that no putty was needed to blend it with the rest of the fuselage.
The rest came from the Sword kit and integrating the parts into the CAC 27 fuselage went more smoothly than expected. For instance, the FJ-3M comes with a nice cockpit tub that also holds a full air intake duct. Thanks to the slightly wider fuselage of the CAC 27, it could be mounted into the new fuselage halves without problems and the intake duct almost perfectly matches the intake frame from the conversion set. The tailpipe could be easily integrated without any mods, too. The fins had to be glued directly to the fuselage – but this is the way how the Sword kit is actually constructed! Even the FJ-3M’s wings match the different fuselage perfectly. The only modifications I had to make is a slight enlargement of the ventral wing opening at the front and at the read in order to take the deeper wing element from the Sword kit, but that was an easy task. Once in place, the parts blend almost perfectly into each other, just minor PSR was necessary to hide the seams!
Other mods include an extended front wheel well for the longer leg from the FJ-3M and a scratched arrester hook installation, made from wire, which is on purpose different from the Y-shaped hook of the Furies.
For the canopy I relied on the vacu piece that came with the JAYS set. Fitting it was not easy, though, it took some PSR to blend the windscreen into the rest of the fuselage. Not perfect, but O.K. for such a solution from a conversion set.
The underwing pylons were taken from the Sword kit, including the early Sidewinders. I just replaced the drop tanks – the OOB tanks are very wide, and even though they might be authentic for the FJ-3, I was skeptical if they fit at all under the wings with the landing gear extended? In order to avoid trouble and for a more modern look, I replaced them outright with more slender tanks, which were to mimic A-4 tanks (USN FJ-4s frequently carried Skyhawk tanks). They actually come from a Revell F-16 kit, with modified fins. The refueling probe comes from the Sword kit.
A last word about the Sword kit: much light, but also much shadow. While I appreciate the fine surface engravings, the recognizably cambered wings, a detailed cockpit with a two-piece resin seat and a pretty landing gear as well as the long air intake, I wonder why the creators totally failed to provide ANY detail of the arrester hook (there is literally nothing, as if this was a land-based Sabre variant!?) or went for doubtful solutions like a front landing gear that consists of five(!) single, tiny parts? Sadism? The resin seat was also broken (despite being packed in a seperate bag), and it did not fit into the cockpit tub at all. Meh!
Painting and markings:
From the start I planned to give the model the late RAN A-4Gs’ unique air superiority paint scheme, which was AFAIK introduced in the late Seventies: a two-tone wraparound scheme consisting of “Light Admiralty Grey” (BS381C 697) and “Aircraft Grey” (BS 381C 693). Quite simple, but finding suitable paints was not an easy task, and I based my choice on pictures of the real aircraft (esp. from "buzz" number 880 at the Fleet Air Arm Museum, you find pics of it with very good light condition) rather than rely on (pretty doubtful if not contradictive) recommendations in various painting instructions from models or decal sets.
I wanted to keep things simple and settled upon Dark Gull Grey (FS 36231) and Light Blue (FS 35414), both enamel colors from Modelmaster, since both are rather dull interpretations of these tones. Esp. the Light Blue comes quite close to Light Admiralty Grey, even though it should be lighter for more contrast to the darker grey tone. But it has that subtle greenish touch of the original BS tone, and I did not want to mix the colors.
The pattern was adapted from the late A-4Gs’ scheme, and the colors were dulled down even more through a light black ink wash. Some post-shading with lighter tones emphasized the contrast between the two colors again. And while it is not an exact representation of the unique RAN air superiority scheme, I think that the overall impression is there.
The cockpit interior was painted in very dark grey, while the landing gear, its wells and the inside of the air intake became white. A red rim was painted around the front opening, and the landing gear covers received a red outline, too. The white drop tanks are a detail I took from real world RAN A-4Gs - in the early days of the air superiority scheme, the tanks were frequently still finished in the old USN style livery, hence the white body but fins and tail section already in the updated colors.
The decals became a fight, though. As mentioned above, the came from an ESCI kit – and, as expected, the were brittle. All decals with a clear carrier film disintegrated while soaking in water, only those with a fully printed carrier film were more or less usable. One roundel broke and had to be repaired, and the checkered fin flash was a very delicate affair that broke several times, even though I tried to save and repair it with paint. But you can unfortunately see the damage.
Most stencils and some replacements (e. g. the “Navy” tag) come from the Sword FJ-3. While these decals are crisply printed, their carrier film is utterly thin, so thin that applying esp. the larger decals turned out to be hazardous and complicated. Another point that did not really convince me about the Sword kit.
Finally, the kit was sealed with matt acrylic varnish (Italeri) and some soot stains were added around the exhaust and the gun ports with graphite.
In the end, this build looks, despite the troubles and the rather exotic ingredients like a relatively simple Sabre with Australian markings, just with a different Navy livery. You neither immediately recognize the FJ-3 behind it, nor the Avon Sabre’s bigger fuselage, unless you take a close and probably educated look. Very subtle, though.
The RAN air superiority scheme from the late Skyhawks suits the Sabre/Fury-thing well – I like the fact that it is a modern fighter scheme, but, thanks to the tones and the colorful other markings, not as dull and boring like many others, e. g. the contemporary USN "Ghost" scheme. Made me wonder about an early RAAF F-18 in this livery - should look very pretty, too?
NEW for the ACS Ren Fest!
This 1 LI tray and tankard decor is perfect for any tavern! Click the tray to attach a drink.
PBR with fallback. Ad shows PBR inside a building at Midday, with a reflection probe and ambient lighting.
Copy/Mod/Original Mesh.
This was quite the accidental shot, basically a fallback choice. I had headed out in the wee hours for Pebble Beach, only to have my path blocked really quickly by a sign that read, "Closed for the U.S. Open." Is that what that stretch is known for? I thought it was the Lone Cypress. So I tried to get back to the motel, got thoroughly lost by trying to trust my sense of direction, which never works, and ended up at the pier where fishermen put their boats into the water. I wish my bad luck would always bring such good luck. It was a delightful morning, full of sea sounds, the barking of nearby seals, the raucous cries of seagulls. And then this made-to-order pile of sea debris. Gotta love California.
the pimp chronicles
Pub: V
7/20/10
There she is, stick in hand, not a care in the world!
Snap! Daddy got lucky and caught a picture that for me depicts a childhood memory. Running around San Francisco with your Daddy with nowhere to go and nothing to do on a weekend day? We do this all the time. This picture pretty much sums that up to me. Even though technically it should be accompanied by a picture of her whining too.
I'm constantly considering the things I do with Chloe and how her memories of them are going to be remembered. These could range from routine tasks such as driving to school everyday. Or to noticeable fun times like all the playgrounds we go to regularly.
Me: “Hey babe, would you rather be a woman or a kid”
Babe: “I like being a kid!”
I actually ask her that all the time. Just because I love hearing her answer. Almost like I need reassurance that not only is she still a kid, but that she still WANTS to be a kid.
These are the fallback years on which happy thoughts ran your day, but you never realized it. Like when something so amazingly simple such as finding a quarter on the ground made your whole day! And not even because of its money, but because it made a good shiny accessory for one of your toys.
If you are a parent or some other old fart involved in a child's life, read this:
By YOU interacting with a child on any given day, you are forming THEIR childhood memories. Something so incredibly mindless to you such as stopping by the 7-Eleven on the way home everyday is different for a child. The routine of doing that isn't understood really what it is you are doing. It's different for them. And oddly enough, it likely means a whole lot to them which can't be explained in words. They are going to remember things like that and the strange little details surrounding it when they become boring adults like you and I. They are living in a dream! So act goofy sometimes, if only sometimes for a second or two. Remember, you are forming their childhood memories.
New for Wasteland, opening July 30!
Lounge around the trading post in style with the new Wastemart Chaise!
Each is 6 LI, and includes HUD to choose from 6 mattress colors and 15 metal colors. Metal choices include plain steel, rusted, and 13 painted metal colors.
PG Version: 24 single sits, 17 cuddles.
Adult Version: PG + 34 adult animations. INM integration plus clean up.
Copy/Mod/Original mesh. PBR with fallback textures. Ads were shot in Midday lighting with cloud color changed to green, using reflection probe around the scene.
On countless occasions I’ve spent time cleaning trucks that haven’t been mine, generally while being temporarily assigned to one or attending to something that just needs to be fixed. Back when I was at Auburn and on p139 for a fortnight, I became possessed one morning and ended up in the wash bay back at the depot, doing a bit more than just the bin lifter as requested, venturing further inside the body to clean out all the crap that was leftover from the garbage runs. I think the interior was generally due for and deserving of a decent rinse given the slop and filth that went through it Monday to Friday. A key objective was to blast away the build up of “paddle aftermath” that was compacted into that level drop between the hopper and body floors. Safe to say I got splattered with all kinds of who knows what in the process, but I was pretty pleased with the result of the effort as seen in the photo... alright for a 5 year old truck. You can probably save off the tare weight with how much gets stuck inside after a while on garbage, just good giving the body a regular clean to maintain this appearance. That’s also your standard application MacDonald Johnston paddle for everything prior to the Gen6 side loader, capable of doing all 3 common bin services. You will notice the hopper openings are substantially bigger than the other body makes too, which can be both beneficial and not so good. Even though they allow larger loads to go through with ease, at the same time the wider gaps increase the chance of material fallback and bulging out of waste as the body fills.
since i don't wear a watch, i seem to have a clock in every room of the house. but am not feeling the love from the time change-- fall back? why? it is dark so early now in the 'late afternoon'....
so you will notice the clocks are not all set, yet, to the correct time. (maybe it is my passive-aggressive response to going off DST??) the 10:26 one is set so i will always know what time it is where my DD is and the last one is my ultimate timekeeper-- my laptop.
ODC timekeeping
The Gorge is a given fallback during shoulder season (and much of winter) in the Pacific Northwest. This hike gave me a sobering awareness of how much of the Gorge was damaged during the fires of 2017. Much beauty, however, remains.
Image made with my Nikon F100.
💲50L
🐝 PBR & FallBack Textures
🐝 PBR Mirror
🐝 HUD w/ 8 OPTIONS included
🐝 Majority Bento Animated
🐝 Includes Props
🐝 7Li
🐝 C/M/NT
Decorate that blank wall with a simple but functional Wall Nook.
Available now at FLF Bash: maps.secondlife.com/secondlife/Galiano/208/122/29
The clocks changed to Greenwich Mean Time for the winter in the UK at 2am on Sunday 27th October, turning back to 1am, so if you'd felt like it, you could have had an extra hour in bed!
Not a spectacular animation, rather a mood scene... ;-)
+++ DISCLAIMER +++
Nothing you see here is real, even though the model, the conversion or the presented background story might be based on historical facts. BEWARE!
Some background:
The SAAB B31 was a Swedish jet-powered multirole aircraft, originally designed to serve as a tactical bomber, ground attack, reconnaissance and interceptor aircraft. In the aftermath of the Second World War, Sweden set about the rebuilding and modernization of its armed forces. Regarding aviation, jet propulsion had been identified as the powerplant of the future, and experience with the SAAB 21R, which had been converted from a propeller-pusher aircraft into a jet-powered fighter and attack aircraft in 1947, bolstered confidence in the home industry’s competence. The Saab 21R was only an interim solution, though. One hundred and twenty-four aircraft were planned but this number was reduced to only 64 and they were mainly used as fighter-bombers. The Flygvapnet’s standard post-war bomber, the Saab 18, a twin piston-engine design from 1944, was outdated, too, and its performance was regarded as inadequate for the Fifties. This led to a major development initiative for modern jet aircraft for the Flygvapnet in 1946, which spawned the Saab 29 ‘Tunnan’ fighter and the Saab B31 light bomber. Both aircraft were initially designed around the de Havilland Goblin turbojet of British origin, but when the more powerful de Havilland Ghost became available, this was chosen as the standard powerplant. Both aircraft incorporated such modern features as swept wings or ejection seats.
The Saab B31 was originally developed as a straightforward tactical bomber replacement for the Saab 18, called the Saab B31, which would carry its free-fall ordnance internally in a bomb bay. The Saab B31 had a streamlined, drop-shaped fuselage. A crew of two were envisioned, the pilot and a navigator/bomb aimer. They would sit in separate cabins, a generously glazed nose section with an optical bombsight and a navigational/bomb aiming radar in a shallow blister underneath, and in a fighter-type cockpit on top of the hull, respectively. Swept wings were planned that would offer a good compromise between speed benefits and range/lift. Due to the aircraft’s size and weight, two de Havilland Ghost engines were required, but integrating these bulky centrifugal flow engines with a relatively large diameter turned out to be a design challenge.
Several layouts were evaluated, including engines buried in the rear fuselage with side air intakes, or engines mounted in wing root fairings with individual exhausts at the wings’ trailing edge. Eventually the Saab B31’s powerplants were directly mounted in nacelles under slightly swept (20°) shoulder wings, what made access and maintenance easy and kept the fuselage free for a huge fuel capacity, a generous bomb bay, and a conventional tricycle main landing gear. The latter’s tread width was quite narrow, though, which might have caused handling problems, so that during the bomber’s design refinements the landing gear arrangement was radically changed into a tandem layout. It eventually comprised of two main struts featuring large low-pressure twin wheels, supported by small outrigger wheels that semi-retracted into fairings under the bulbous engine nacelles. While unusual, this arrangement had the side benefit that the bomb bay could be lengthened and the fuel capacity in the fuselage could be increased without a center of gravity shift, with the rear/main landing gear strut well placed further aft, well behind the aircraft’s center of gravity. This, however, prevented normal rotation upon take-off, so that the front strut was lengthened to provide the aircraft with an imminent positive angle of attack while rolling, giving the Saab B31 a distinctive nose-up stance on the ground.
The enlarged bomb bay could hold up to four free-fall 340 kg bombs, the B31’s primary weapon. Additional ordinance, typically two further single bombs of up to 500 kg caliber, pods with unguided missiles, or drop tanks to extend range, could be carried on a pair of hard points outside of the engine nacelles. The maximum total payload was 2.400 kg. No offensive or defensive guns were carried, the B31 was supposed to rely only on speed and agility. Large air brakes on the aircraft’s flanks were introduced to prevent the exceeding of the B31’s design speed limit of Mach 0.9 in a dive, and they also helped to slow down the aircraft upon landing. To reduce the landing run length further a brake parachute was housed in an extended teardrop fairing on the fin that also held the swept horizontal stabilizers.
Overall, the Saab B31 reminded vaguely of the Soviet Yak-120/25 (NATO code Flashlight A) and of the French Sud-Ouest SO.4050 Vautour, which were both under development at the same time. Beyond the original tactical bomber role that was supposed to supersede the Swedish B 18, the Saab B31 was also intended to fulfill night/all-weather reconnaissance missions, outfitted with a camera and sensor pallet in the bomb bay and flash bombs on the wing hardpoints. Furthermore, the aircraft was proposed to become, in a second step, the basis for a jet-powered long-range all-weather fighter, a type of aircraft that was direly needed by Flygvapnet during the late Forties. The situation was so severe and urgent that the Swedish Air Force did not want to wait for a J31 development and had to procure sixty radar-equipped de Havilland Mosquito NF.30 night fighters from Great Britain as a hasty stopgap solution – a totally outdated model in the late Forties, but it was the best and only readily available off-the-rack solution.
In parallel, both engine and aircraft technology underwent dramatic developments and literally made leaps: In December 1948, an initial contract for the design and mockup of Saab's newly proposed P.1150 design was issued, a modern swept-wing design that already represented the next, transonic fighter aircraft generation. The resulting aircraft would become the Saab 32 ‘Lansen’ and it literally overtook the B31’s intended role as the Saab 18 bomber and attack aircraft replacement. However, a modern all-weather fighter with long range and a powerful radar was still not on the horizon, and, consequently, the Saab B31’s original bomber/reconnaissance version was dropped completely in favor of an optimized interceptor derivative with a powerful on-board radar: the J31. This was, however, also just a stopgap solution until an all-weather fighter version of the favored Saab 32 would be ready for service, so that a single aircraft type would take over multiple military roles and therewith simplify production, maintenance and logistics.
From that point on the Saab B31 was re-designed and optimized for a principal fighter role, with an attack capability as a secondary capability. However, due to its bomber origins and its intended mission profile the J31 was not intended to be a typical sleek and nimble dogfighter (that was the contemporary Saab 29’s role as a day fighter, even though a radar-equipped version of the Tunnan was on Saab’s drawing boards, too, yet not realized because compact systems were not available), but rather as a standoff night fighter which would loiter on station and patrol the air space, search for targets and then identify and engage them.
The bomber’s large air brakes were a welcome feature to position the approaching fighter behind a potential slower target, which were primarily relatively cumbersome bombers that would come in at medium to high altitude and at subsonic speed. This mission profile heavily influenced the J31 design and also set boundaries that were later hard to overcome and develop the aircraft’s potential further. While the light bomber basis would meet the required demands concerning range, speed and limited agility, the obligatory radar and its periphery to fulfill the N/AW fighter mission led to a major re-design of the forward fuselage. A large radar dish under a solid nose radome now occupied the formerly glazed nose section, and the radar operator was placed together with the pilot in a new pressurized side-by-side cockpit under a common canopy. A large and relatively flat forward windshield was used; while not conducive to high-speed flight, it provided distortion-free external visibility, something that was particularly valued for a night fighter at that time. Both pilot and navigator/radar operator had full steering equipment, what also made a dedicated trainer version unnecessary. Both sticks were extendable so that more force could be exerted upon it by the pilot as a fallback measure in the event of a hydraulic failure. Bleed air from the engines was used to de-ice the wings’ and tail surfaces’ leading edges and the engines’ air intakes, so that the aircraft could operate even in harsh climatic conditions.
Radar and fire control system for the J31 were created and produced by Ericsson and called “Gryning” (= Dawn). The system was quite advanced for the time even though complex: a combination of three different radars, each performing separate functions. The system comprised a search radar, a tracking radar, both located in the nose under a huge mutual radome, and a tail warning radar with a separate, smaller antenna. The search radar covered the front hemisphere and could detect aircraft at distances up to 35 kilometres (about 20 miles) away while the tracking radar could achieve a weapons lock up to 4 km (2.5 miles) away. Additionally, the Gryning system had a limited look-down capability, being able to detect aircraft that flew underneath the J31 at an altitude of down to 800 m (2.600 ft). The tail-mounted surveillance radar was effective up to 15 km (almost 10 miles) away. The complexity of this vacuum tube-based radar system, produced before the advent of semiconductor electronics, required a lot of internal space and intensive maintenance to keep it operating properly – and it would have been much too big or heavy to fit into the more modern but also more slender Saab 32 airframe.
The armament was changed, too. While the B31 bomber was intended to carry no guns at all the fighter derivative was now armed with four 20 mm cannon in the lower nose, plus two retractable unguided air-to-air missile racks in the former bomb bay in tandem, carrying a total of 96 projectiles, which were supposed to be fired singly, short bursts or in one or more massive salvoes against bomber formations, covering a huge field of fire and ensuring a takedown even with a single hit. This core armament was complemented by a pair of underwing hardpoints outside of the engine nacelles which could carry pods with further 18 unguided missiles each, iron bombs of up to 500 kg calibre for a secondary attack capability, or 570 l drop tanks to extend the J31’s range and loiter time.
An initial order for three prototypes was placed by the Swedish government, and on 16 October 1950, the first J31, even though still lacking the radar, conducted its maiden flight. The flight test program proceeded relatively smoothly, but the performance was rather poor for a fighter. More powerful engines were required, but choices for Saab were very limited. The use of the Saab 29’s indigenous afterburner variant of the Ghost (which was by then license-produced in Sweden as the Svenska Flygmotor RM2) was deemed inefficient for the large aircraft, so that attempts were made to improve the Ghost’s dry thrust for the J31 without an increased fuel consumption through reheat. This new indigenous engine variant became the RM2F (“förstärkt” = “powered-up”), which provided 5,400 lbf (24.02 kN) of thrust with water-alcohol injection instead of the RM2’s original dry 5,000 lbf (22 kN) maximum thrust. The tank for the required water-alcohol mixture was carried in the rear half of the former bomb bay and replaced one of the unguided missile racks. These were hardly ever used operationally, though, and soon completely removed, replaced by a second water-alcohol tank, which gave the aircraft enough endurance of 30 minutes at the increased thrust output level.
A follow-on order for six pre-production aircraft was soon received, which were still equipped with the weaker original RM2 and designated J31A. These machines were delivered to F 1 Västmanland Flygflottilj at Hässlö air base in Central Sweden, which just had been converted from a bomber to a night fighter unit, having been equipped with the J 30 Mosquitos. There the J31 was evaluated against the J30 until early 1951 and deemed superior in almost every aspect. With these satisfactory results, a full production order for 54 more aircraft was placed in mid-1951. These machines were now outfitted with more powerful RM2F engines and other refinements and designated J31B. This became the type’s operational main variant. All were delivered to F 1 where they were exclusively operated and gradually replaced the J 30s. In service the J31 received the unofficial nickname “Val” (= Whale), due to its bulky yet streamlined shape, but it was officially never adopted.
During regular maintenance in the following two years, the six early J31As received the stronger RM2F, together with the second water-alcohol tank as well as some avionics updates and were accordingly re-designated J31Bs. Further updates included wipers for the windscreen (a serious issue esp. at slow speed and while taxiing) and two smaller brake parachutes instead of the single large original one.
All J31s were delivered in a natural metal finish and retained it throughout their career; only two machines ever received camouflage during trials, but this measure was deemed unnecessary for the aircraft due to their role. Some aircraft of F 1’s 3rd squadron and operated by the unit’s staff flight had the aircrafts’ fins painted in dark green, though, to improve the contrast to the tactical code letters’ colour, yellow or white, respectively. The J31s’ radomes were made from fiberglass and originally tinted in opaque black. During maintenance and after damage, however, some machines received newly produced replacement fairings which were untinted/semi-transparent.
The only major update the J31B received was rolled out starting in 1958, when the IR-guided Rb24 (AIM-9B Sidewinder AAM) was introduced in the Swedish Air Force. Together with the J29 Tunnan fighters the J31s were outfitted to carry launch rails on the wing hardpoints – even though only a single pair could be carried in total. This, however, markedly improved the type’s combat efficiency, and it would take until the Saab 35F in 1965 with its Rb27/28 Falcon missiles to introduce more capable guided anti-aircraft missiles. Since the Rb24s extended the J31’s weapon range considerably, a potential gun upgrade with 30 mm cannons was not executed and Saab’s resources rather allocated into the Saab 32’s development.
Even though the J31B was a capable night and all-weather fighter for its time, it was limited due to its outdated weaponry and quickly superseded by advancing radar, engine and aerodynamic technologies. It did its job but lacked development and performance potential – and it was a large and complicated aircraft that required lots of maintenance. However, the J31 turned out to be a very stable and robust weapon platform, and it was quite popular among the crews because of the spacious cockpit, even though the field of view on the ground was very limited, due to the tall landing gear front leg, and several J31s were involved in taxiing accidents. Due to its twin engines and radar intercept operator, pilots gained more confidence on long missions in the remote northern areas of. Sweden, esp. on mission over open water.
When the Saab 32’s fighter version, the J 32B, eventually became operational in 1958, it was clear that the heavy and highly limited twin-engine J31B would not remain in service for much longer. By 1963 all machines had been retired from frontline service, initially stored in reserve but scrapped by 1970. Two machines remained operational, though: as flying test beds for the Swedish Air Force’s Försökscentralen (FC) at Malmen AB, where they served until 1981 – primarily to test radar and missile guidance systems, and as radar targets for war games and anti-aircraft unit trainings.
General characteristics:
Crew: 2
Length: 15,76 m (51 ft 7 1/2 in)
Wingspan: 16.96 m (55 ft 2/3 in)
Height: 4,21 m (13 ft 9 1/2 in)
Wing area: 45 m2 (480 sq ft)
Empty weight: 9,000 kg (19,823 lb)
Gross weight: 17,500 kg (38,546 lb)
….Max takeoff weight: 19,000 kg (41,850 lb)
Fuel capacity: 5,100 L (1,350 US gal / 1,120 imp gal) maximum internal fuel
plus 2x 570 L (150 US gal, 120 imp gal) optional drop-tanks
Powerplant:
2× Svenska Flygmotor RM2F centrifugal-flow turbojet engine (Rolls Royce Ghost), each with
4,750 lbf (21.1 kN) dry thrust at 10,250 rpm and
5,400 lbf (24.02 kN) with temporary water-alcohol injection
Performance:
Maximum speed: 1,090 km/h (677 mph, 588 kn; Mach 0.9) at 10,000 ft (3,000 m)
Cruise speed: 732 km/h (455 mph, 395 kn)
Stall speed: 150 km/h (92.8 mph, 80.6 kn) with approach power
Combat range: 1.850 km (1,145 mi, 995 nmi) on internals
Ferry range: 2.200 km (1,375 mi, 1,195 nmi) with 2× 570 l drop-tanks
Service ceiling: 16,200 m (53,062 ft)
Rate of climb: 40 m/s (7.681 ft/min)
Wing loading: 87.1 lb/sq ft (388 kg/m²)
Thrust/weight: 0.32
Armament:
4× 20 mm (0.79 in) akan m/47C (license produced Hispano Mark V) autocannon with 220 RPG
48× 75 mm (3.0 in) srak m/55 (Bofors 75 mm (3.0 in) rocket "Frida") unguided air-to-air missiles
with contact fuze high-capacity warhead on retractable rack in ventral bay
(not used operationally, later completely deleted in favor of a second water-alcohol tank)
2× wet underwing hardpoints outside of the engine nacelles for 600 kg (1.321 lb) each;
alternatively a pair of Rb24 (AIM9-B Sidewinder) IR-guided air-to-air missiles
The model and its assembly:
While it does not look spectacular, the J31 (actually my second use of this designation for a Swedish Fifties all-weather fighter, the first was an A.W. Meteor NF.14, but the “31” was lent from the Spitfire PR.XIX in Swedish service as S31) was a major creation feat. It all started with a discussion with fellow Swedish board member Pellson at whatifmodellers.com about Saab prototypes, esp. the early designs. That made me wonder about a twin-jet engine aircraft, something that could replace the Saab 18 bombers much like the BAC Canberra with the RAF’s Mosquito – and looking at similar international projects of the time like the Soviet Il-29 and Yak-25 as well as the French S.O. 4050 Vautour I thought that something similar could work well for Sweden, too.
My concept started with a primary light bomber and attack role, much like the B18 and the Canberra, with the outlook to develop a radar-bearing all-weather fighter from it, which was direly needed in Sweden in the Mid-Fifties and led to the procurement of two interim types in real life, the J30 (Mosquito night fighter) and the J33 (Venom night fighter), while plans were made to equip the J29 with a radar and the Saab 32 already on the drawing boards, even though the latter’s fighter version would be delayed well into the Sixties.
The core of the build was a leftover fuselage from a Matchbox F3D Skyknight – from an incomplete kit that came OOB with one of its three sprue trees double (even though in different colours!). The canopy was also still there, and now I eventually found a good use for it. However, not much more would be taken over from the Skyknight, because the overall layout would be much different, dictated by the bulky centrifugal flow engines that were (only) available to Sweden in the late Forties and which also powered the successful J29 Tunnan. The engines could, due to their diameter and the need for ducts, not be buried in the fuselage, so that they would go under the wings, directly attached to them as in the Il-29 and Vautour. The wings would be slightly swept (around 20°), as a compromise between modernism (as on the J29) and good range/endurance, and shoulder-mounted for good ground clearance and to avoid FOP (an issue of the Yak-25).
Since the engine pods should not be too large and bulky I decided that the main wheels would not retract into them (à la Il-28) and rather follow the Vautour route: with a tandem arrangement retracting into the fuselage and with small outrigger wheels. This had, for the original bomber version, the benefit, that the internal bomb bay could become longer than with a more conventional tricycle landing gear arrangement that would full retract into the hull, much like the Douglas A3D/B.66, with a wider track. And it would look more exotic, too.
With this concept I started a donor parts safari and started work on the fuselage. First major feat was to clean the F3D’s flanks from its original engine fairings – thankfully the Matchbox kit provides them as separate parts, so omitting them was simple, but there were enough major recesses and areas beyond the F3D’s basically teardrop shape hull that had to be filled and PSRed, including the original wing attachment points in the hull’s middle.
Another issue was the cockpit, which was missing through the double sprues. I was lucky to find an original Matchbox F3D tub in the spare box, from my first Skyknight build ever in the late Eighties (then built as a Vietnam era EF-10). New seats were procured as well as two (ugly) pilot figures and a dashboard from an Italeri Tornado IDS. However, the cockpit would later cause some more trouble…
The nose was generously filled with steel balls to keep it down (you never know…), and once the hull was closed, I implanted a new rear landing gear well. In the meantime, I kept searching for engine nacelle and wing parts – both turned out to be challenging. Not that I had not enough material to choose from, but I wanted to make the parts to be as authentic as possible – the nacelles conveying a centrifugal engine inside (see the Gloster Meteor for reference), and the light wing sweep angle as well as the desire for a not-too-modern look made the wing choice really hard.
The nacelles were completed first. I remembered some leftover parts from a Matchbox Meteor night fighter, mainly the intakes, which would be perfect. But the rest of the nacelles took a while to materialize. Eventually I found engine pods from a Hobbycraft Su-25, which are separate pieces. They had a more or less square diameter shape, but their size was good and so I combined them with the round (and bigger!) Meteor NF.14 intakes, after having added trimmed-down intake cones from a Trumpeter Il-28 inside, and PSRing the different shapes into something …more natural. Even though outrigger wheels would later be added I omitted eventual wells at this point, because I had to define the stance through the tandem main wheels first, and this was still tbd.
The wing donors became a lengthy affair. At one point I became so desperate that I tried to use the wing tips from a VEB Plasticart 1:100 Tu-20/95 bomber, but that failed (thankfully!) because the parts turned out to be warped and simply too ugly for the build. I did not find any suitable material in The Stash™, tested wings from an A-6 and an F-14, nothing worked well. I eventually procured – in a forlorn move – a vintage Revell 1:113 B-47 kit. Horrible thing, but its outer wings were useful, even though they required massive modifications. Their roots were cut away to reduce span and their angle was set at about 20°; the slender tips were also cut off, resulting in an almost trapezoid shape with a slightly extended wing chord at the trailing edge of the roots. Lots of PSR was required to improve the surface and to fill some gaps from the OOB engine pod attachment points of the B-47. Ugh.
At that point I had also already found a good fin: from an Academy/Minicraft 1:144 B-1B bomber! This not only offered a very Fifties-esque round and swept shape, it also had suitable attachment points for the stabilizers for a cruciform tail, which appeared necessary due to the engines’ wing position. As a side benefit, I could use the B-47’s wing tips as stabilizers, even though they had to be PSRed a lot, too.
To attach the new wings to the F3D fuselage I made cutouts at shoulder height, but the engine pods were first mounted and PSRed under the wings. More putty and sanding mess, but it was worthwhile.
In the meantime I worked on the landing gear and used parts from the ugly VEB Plasticart Tu-20/95 to scratch a tandem layout with twin wheels and a significant nose-up stance (due to the rear wheels’ position beyond the aircraft’s centre of gravity). Once this was settled and the wings in place I could work on the outrigger wheels. These were procured from a Matchbox 1:72 Sea Harrier and mounted in scratched fairings under the engine pods, so that they could semi-retract. With the ground clearance defined by the main wheels a suitable position and length for the outriggers could be found, and in the end the J31 has a proper stance with all four legs on the ground.
Painting and markings:
I like to apply simple liveries to weird builds, and for the J31 I settled upon a NMF finish – which was typical for the contemporary J29 Tunnan fighters, too. Only the reconnaissance versions as well as the fighters of as single operational unit were ever camouflaged (in dark green and dark blue). The only other realistic cammo option would have been the standard Swedish uniform dark green over blue grey. But bare metal appeared IMHO much better suited.
As a non-standard measure the model received an overall thin coat of grey primer, primarily to identify dents and notches on its many PSRed surface areas – a good move, because a lot of small flaws could be identified and treated before a final overall coat with “White Aluminium” from a rattle can (Duplicolor, RAL 9006) was applied and details like the radome, antennae (both in black) and the landing gear and its wells (in a light bronze tone, seen on Saab 29s and 32s) were painted in detail. I think the silver underlines the J31’s clean lines well?
The model received a light black ink washing, less for true weathering but to emphasize engraved details and for a “cloudier” look of the NMF surfaces. This was further enhanced through a careful treatment with grinded graphite (which adds a truly metallic shine to the paint), and since a lot of surface details were lost through PSR I did some manual panel-shading with different silver tones and re-created panel lines all over the hull with a soft pencil, mostly free-handedly. Quite simple, but it improves the overall impression a lot.
Decals were puzzled together. The Swedish roundels came from a generic TL-Modellbau sheet, the “T” on the tail was scratched from generic white and blue stripes from the same manufacturer. The blue band around the nose was made with the same material, plus a white “T” – inspired by tactical markings from some J29s from the Fifties. Some stencils were collected from the scrap box, and black walkway borders added to the wings’ upper surfaces and the spine behind the cockpit. As a side benefit these hide some lingering inconsistencies on the wing surfaces well.
Finally, the model was sealed with semi-gloss acrylic varnish (Italeri) for a shiny finish, except for the radomes, which became matt.
It might not look spectacular or exciting, but I am quite proud of this “second” J31, because it not only was a major kitbashing project, it also conveys the Fifties “look and feel” I wanted to catch, like its contemporaries S.O. 4050 Vautour, Yak-25, or even the stillborn Baade Ba-152 airliner. From that point it turned out very well, and going for a simple NMF livery was IMHO also a good move – the J31 has a certain “space age” look? At least, this is what you can get when you combine major parts from F3D, B-47. B1, Il-28, Su-25, Tu-95 and a Gloster Meteor… 😉
French postcard in Les Vedettes de Cinéma series by A.N., Paris, no. 36. Photo: Paramount.
May McAvoy (1899-1984) als written as MacAvoy, was an American actress of the silent screen, best known as Esther in the classic epic Ben-Hur (Fred Niblo, 1925).
Born in New York City in 1899, within a well-to-do family that owned and operated a livery stable, May left school at the age of 17 to act in her first role in the film Hate by Walter Richard Stahl. From then she had small parts, even uncredited roles in films, for various Californian film companies, until she did a few films for the J. Stuart Blackton Company. Blackton, the co-founder of and regular director at Vitagraph, had started his own production company in 1917. After two smaller parts in films for the company, she got her first lead in The House of the Tolling Bell (1920), a mystery film about a haunted house, directed by Blackton himself. Blackton let her star again, again opposite Bruce Gordon, in The Forbidden Valley (1920). In 1921 she acted e.g. in Chester M. Franklin's A Private Scandal, which script had been purposely written by Hector Turnbull for McAvoy. The film was the first of a series of seven films at Realart Pictures, in which McAvoy constantly starred, directed either by Frank O'Connor or William Desmond Taylor. The apparent success of these films convinced Paramount to lure her away with a contract. Petite as she was, McAvoy was independent enough to defend her interests.
In 1922 May McAvoy started to act at Paramount/ Famous Players-Lasky, where she already had done an occasional film in the past. It was William C. DeMille who mostly directed her at Paramount: in Clarence (1922), starring Wallace Reid and Agnes Ayres, Grumpy (1923), starring Theodore Roberts, Only 38 (1923), in which she herself had the lead, and The Bedroom Window (1924), another starring role with Malcolm McGregor and Ricardo Cortez as her co-stars, and probably McAvoy's last film for Paramount. In 1923 McAvoy got into a row with director-producer Cecil B. DeMille, because she refused the role in his film Adam's Rib, as it meant her hair would be bobbed and she had to show partial nudity. Instead, she complained parts she wanted were given to other actresses: to Betty Bronson in Peter Pan and to Betty Compson in Little Minister. After she had been suspended, she bought off her contract and started freelancing.
This didn't mean a fallback at all, as May McAvoy managed to play memorable parts in e.g. The Enchanted Cottage (John S. Robertson, 1924) starring and produced by Richard Barthelmess, Tessie (Dallas M. Fitzgerald, 1925) and in particular Lady Windermere's Fan (Ernst Lubitsch, 1925) with Ronald Colman, while McAvoy replaced Gertrude Olmstead in her best known silent film, MGM's classic super production Ben-Hur: A Tale of the Christ (Fred Niblo 1925). McAvoy played Esther, the love interest of the title character, played by Ramon Novarro. Her former rival at Paramount, Betty Bronson, would play the small part of the Virgin Mary. Two years after, McAvoy had an important part in what is often credited as the first sound feature, The Jazz Singer (Alan Crossland 1927), which, actually, was a part-talkie, in which most actors, including McAvoy, did not talk yet. She played Mary, girlfriend of the male lead, played by singer-actor Al Jolson.
Afterward, May McAvoy did act in all-talkie movies, such as The Lion and the Mouse (Lloyd Bacon, 1928), and The Terror (Roy Del Ruth, 1928), shot at Warner's studio in Burbank with failing technology, distorting her voice. Not so much because of her voice, but on request of her new (1929) husband, Maurice Cleary, banker and treasurer of United Artists, she withdrew to private life and took care of their son, Patrick (1932-2012). Despite some sources write they remained married until his death, English Wikipedia has convincing proof they divorced in 1940. It also explains that in 1940 McAvoy went back to the set, but had to satisfy with bit parts. Hollywood was not kind to its former stars. Still, until 1959 she had small parts, even uncredited ones - her last part being an extra in the remake of Ben-Hur (1959) by William Wyler, himself a former assistant-director on the silent version. May McAvoy died on April 26, 1984, in Los Angeles, as the consequence of a heart attack one year earlier. She was interred in the Holy Cross Cemetery in Culver City. May McAvoy has a star on the Hollywood Walk of Fame at 1731 Vine Street.
Sources: Dave Lobosco on greatentertainersarchives.blogspot.com/2013/07/may-mcavoy..., Wikipedia (English and German), and IMDb.
· ▸ Tiffany Bathroom single purchase is available in:
ㅤㅤ• PG version
ㅤㅤ• Adult version
· ▸ Tiffany Bathroom includes:
ㅤㅤ• PG Animations
ㅤㅤ• Adult animations
ㅤㅤ · 3some FFM - It's Not Mine Cleanup
ㅤㅤ• Steam On/Off
ㅤㅤ• Props
ㅤㅤ• Facial
ㅤㅤ• PBR Textures version
ㅤㅤ• Fallback Textures version
ㅤㅤ• Texture HUD
ㅤㅤ · 10 Bathtub Feather color textures
ㅤㅤ · 5 Bathtub Porcelain color textures
ㅤㅤ · 4 Bathtub Metal color textures
ㅤㅤ · 5 Sink Porcelain color textures
ㅤㅤ · 4 Sink Metal color textures
ㅤㅤ · 4 Mirror Metal color textures
· ▸ Copy
· ▸ Modify
· ▸ No Transfer
ㅤㅤｓｈｏｐ ｔｈｉｓ ａｔ ｅｑｕａｌ１０ 苛 尉 ズ ょ ド
ㅤㅤ
▸ Ｊｏｉｎ ｕｓ ｏｎ Ｐｒｉｍｆｅｅｄ
ㅤㅤ
▸ Ｊｏｉｎ ｕｓ ｏｎ Ｆａｃｅｂｏｏｋ
ㅤㅤ
▸ Ｊｏｉｎ ｕｓ ｏｎ Ｉｎｓｔａｇｒａｍ
ㅤㅤ
▸ Ｊｏｉｎ ｕｓ ｏｎ Ｙｏｕｔｕｂｅ
ㅤㅤ
▸ Main Sim
ㅤㅤ
ㅤㅤ
Witness is a mutant who can see into the past an ability she calls fallback. She can also understand any language using the ability of Omnilingualisum read and write them as well meaning no code is unbreakable round her. Then Last but not least is her physical powers at least on a level with international athletes a gift of her mutant genes
+++ DISCLAIMER +++
Nothing you see here is real, even though the conversion or the presented background story might be based on historical facts. BEWARE!
Some background:
The CAC Sabre, sometimes known as the Avon Sabre or CA-27, was an Australian variant of the North American Aviation F-86F Sabre fighter aircraft. In 1951, Commonwealth Aircraft Corporation obtained a license agreement to build the F-86F Sabre. In a major departure from the North American blueprint, it was decided that the CA-27 would be powered by a license-built version of the Rolls-Royce Avon R.A.7, rather than the General Electric J47. In theory, the Avon was capable of more than double the maximum thrust and double the thrust-to-weight ratio of the US engine. This necessitated a re-design of the fuselage, as the Avon was shorter, wider and lighter than the J47.
To accommodate the Avon, over 60 percent of the fuselage was altered and there was a 25 percent increase in the size of the air intake. Another major revision was in replacing the F-86F's six machine guns with two 30mm ADEN cannon, while other changes were also made to the cockpit and to provide an increased fuel capacity.
The prototype aircraft first flew on 3 August 1953. The production aircrafts' first deliveries to the Royal Australian Air Force began in 1954. The first batch of aircraft were powered by the Avon 20 engine and were designated the Sabre Mk 30. Between 1957 and 1958 this batch had the wing slats removed and were re-designated Sabre Mk 31. These Sabres were supplemented by 20 new-built aircraft. The last batch of aircraft were designated Sabre Mk 32 and used the Avon 26 engine, of which 69 were built up to 1961.
Beyond these land-based versions, an indigenous version for carrier operations had been developed and built in small numbers, too, the Sea Sabre Mk 40 and 41. The roots of this aircraft, which was rather a prestigious idea than a sensible project, could be traced back to the immediate post WWII era. A review by the Australian Government's Defence Committee recommended that the post-war forces of the RAN be structured around a Task Force incorporating multiple aircraft carriers. Initial plans were for three carriers, with two active and a third in reserve, although funding cuts led to the purchase of only two carriers in June 1947: Majestic and sister ship HMS Terrible, for the combined cost of AU£2.75 million, plus stores, fuel, and ammunition. As Terrible was the closer of the two ships to completion, she was finished without modification, and was commissioned into the RAN on 16 December 1948 as HMAS Sydney. Work progressed on Majestic at a slower rate, as she was upgraded with the latest technology and equipment. To cover Majestic's absence, the Colossus-class carrier HMS Vengeance was loaned to the RAN from 13 November 1952 until 12 August 1955.
Labour difficulties, late delivery of equipment, additional requirements for Australian operations, and the prioritization of merchant ships over naval construction delayed the completion of Majestic. Incorporation of new systems and enhancements caused the cost of the RAN carrier acquisition program to increase to AU£8.3 million. Construction and fitting out did not finish until October 1955. As the carrier neared completion, a commissioning crew was formed in Australia and first used to return Vengeance to the United Kingdom.
The completed carrier was commissioned into the RAN as HMAS Majestic on 26 October 1955, but only two days later, the ship was renamed Melbourne and recommissioned.
In the meantime, the rather political decision had been made to equip Melbourne with an indigenous jet-powered aircraft, replacing the piston-driven Hawker Fury that had been successfully operated from HMAS Sydney and HMAS Vengeance, so that the "new jet age" was even more recognizable. The choice fell on the CAC Sabre, certainly inspired by North American's successful contemporary development of the navalized FJ-2 Fury from the land-based F-86 Sabre. The CAC 27 was already a proven design, and with its more powerful Avon engine it even offered a better suitability for carrier operations than the FJ-2 with its rather weak J47 engine.
Work on this project, which was initially simply designated Sabre Mk 40, started in 1954, just when the first CAC 27's were delivered to operative RAAF units. While the navalized Avon Sabre differed outwardly only little from its land-based brethren, many details were changed and locally developed. Therefore, there was also, beyond the general outlines, little in common with the North American FJ-2 an -3 Fury.
Externally, a completely new wing with a folding mechanism was fitted. It was based on the F-86's so-called "6-3" wing, with a leading edge that was extended 6 inches at the root and 3 inches at the tip. This modification enhanced maneuverability at the expense of a small increase in landing speed due to deletion of the leading edge slats, a detail that was later introduced on the Sabre Mk 31, too. As a side benefit, the new wing leading edges without the slat mechanisms held extra fuel. However, the Mk 40's wing was different as camber was applied to the underside of the leading edge to improve low-speed handling for carrier operations. The wings were provided with four stations outboard of the landing gear wells for up to 1000 lb external loads on the inboard stations and 500 lb on the outboard stations.
Slightly larger stabilizers were fitted and the landing gear was strengthened, including a longer front wheel strut. The latter necessitated an enlarged front wheel well, so that the front leg’s attachment point had to be moved forward. A ventral launch cable hook was added under the wing roots and an external massive arrester hook under the rear fuselage.
Internally, systems were protected against salt and humidity and a Rolls-Royce Avon 211 turbojet was fitted, a downrated variant of the already navalized Avon 208 from the British DH Sea Vixen, but adapted to the different CAC 27 airframe and delivering 8.000 lbf (35.5 kN) thrust – slightly more than the engines of the land-based CAC Sabres, but also without an afterburner.
A single Mk 40 prototype was built from a new CAC 27 airframe taken directly from the production line in early 1955 and made its maiden flight on August 20th of the same year. In order to reflect its naval nature and its ancestry, this new CAC 27 variant was officially christened “Sea Sabre”.
Even though the modified machine handled well, and the new, cambered wing proved to be effective, many minor technical flaws were discovered and delayed the aircraft's development until 1957. These included the wing folding mechanism and the respective fuel plumbing connections, the landing gear, which had to be beefed up even more for hard carrier landings and the airframe’s structural strength for catapult launches, esp. around the ventral launch hook.
In the meantime, work on the land-based CAC 27 progressed in parallel, too, and innovations that led to the Mk 31 and 32 were also incorporated into the naval Mk 40, leading to the Sea Sabre Mk 41, which became the effective production aircraft. These updates included, among others, a detachable (but fixed) refueling probe under the starboard wing, two more pylons for light loads located under the wing roots and the capability to carry and deploy IR-guided AIM-9 Sidewinder air-to-air missiles, what significantly increased the Mk 41's efficiency as day fighter. With all these constant changes it took until April 1958 that the Sabre Mk 41, after a second prototype had been directly built to the new standard, was finally approved and cleared for production. Upon delivery, the RAN Sea Sabres carried a standard NATO paint scheme with Extra Dark Sea Grey upper surfaces and Sky undersides.
In the meantime, the political enthusiasm concerning the Australian carrier fleet had waned, so that only twenty-two aircraft were ordered. The reason behind this decision was that Australia’s carrier fleet and its capacity had become severely reduced: Following the first decommissioning of HMAS Sydney in 1958, Melbourne became the only aircraft carrier in Australian service, and she was unavailable to provide air cover for the RAN for up to four months in every year; this time was required for refits, refueling, personnel leave, and non-carrier duties, such as the transportation of troops or aircraft. Although one of the largest ships to serve in the RAN, Melbourne was one of the smallest carriers to operate in the post-World War II period, so that its contribution to military actions was rather limited. To make matters worse, a decision was made in 1959 to restrict Melbourne's role to helicopter operations only, rendering any carrier-based aircraft in Australian service obsolete. However, this decision was reversed shortly before its planned 1963 implementation, but Australia’s fleet of carrier-borne fixed-wing aircraft would not grow to proportions envisioned 10 years ago.
Nevertheless, on 10 November 1964, an AU£212 million increase in defense spending included the purchase of new aircraft for Melbourne. The RAN planned to acquire 14 Grumman S-2E Tracker anti-submarine aircraft and to modernize Melbourne to operate these. The acquisition of 18 new fighter-bombers was suggested (either Sea Sabre Mk 41s or the American Douglas A-4 Skyhawk), too, but these were dropped from the initial plan. A separate proposal to order 10 A-4G Skyhawks, a variant of the Skyhawk designed specifically for the RAN and optimized for air defense, was approved in 1965, but the new aircraft did not fly from Melbourne until the conclusion of her refit in 1969. This move, however, precluded the production of any new and further Sea Sabre.
At that time, the RAN Sea Sabres received a new livery in US Navy style, with upper surfaces in Light Gull Gray with white undersides. The CAC Sea Sabres remained the main day fighter and attack aircraft for the RAN, after the vintage Sea Furies had been retired in 1962. The other contemporary RAN fighter type in service, the Sea Venom FAW.53 all-weather fighter that had replaced the Furies, already showed its obsolescence.
In 1969, the RAN purchased another ten A-4G Skyhawks, primarily in order to replace the Sea Venoms on the carriers, instead of the proposed seventh and eighth Oberon-class submarines. These were operated together with the Sea Sabres in mixed units on board of Melbourne and from land bases, e.g. from NAS Nowra in New South Wales, where a number of Sea Sabres were also allocated to 724 Squadron for operational training.
Around 1970, Melbourne operated a standard air group of four jet aircraft, six Trackers, and ten Wessex helicopters until 1972, when the Wessexes were replaced with ten Westland Sea King anti-submarine warfare helicopters and the number of jet fighters doubled. Even though the A-4G’s more and more took over the operational duties on board of Melbourne, the Sea Sabres were still frequently deployed on the carrier, too, until the early Eighties, when both the Skyhawks and the Sea Sabres received once more a new camouflage, this time a wraparound scheme in two shades of grey, reflecting their primary airspace defense mission.
The CAC 27 Mk 41s’ last carrier operations took place in 1981 in the course of Melbourne’s involvements in two major exercises, Sea Hawk and Kangaroo 81, the ship’s final missions at sea. After Melbourne was decommissioned in 1984, the Fleet Air Arm ceased fixed-wing combat aircraft operation. This was the operational end of the Sabre Mk 41, which had reached the end of their airframe lifetime, and the Sea Sabre fleet had, during its career, severely suffered from accidents and losses: upon retirement, only eight of the original twenty-two aircraft still existed in flightworthy condition, so that the aircraft were all scrapped. The younger RAN A-4Gs were eventually sold to New Zealand, where they were kept in service until 2002.
General characteristics:
Crew: 1
Length: 37 ft 6 in (11.43 m)
Wingspan: 37 ft 1 in (11.3 m)
Height: 14 ft 5 in (4.39 m)
Wing area: 302.3 sq ft (28.1 m²)
Empty weight: 12,000 lb (5,443 kg)
Loaded weight: 16,000 lb (7,256 kg)
Max. takeoff weight: 21,210 lb (9,621 kg)
Powerplant:
1× Rolls-Royce Avon 208A turbojet engine with 8,200 lbf (36.44 kN)
Performance:
Maximum speed: 700 mph (1,100 km/h) (605 knots)
Range: 1,153 mi, (1,000 NM, 1,850 km)
Service ceiling: 52,000 ft (15,850 m)
Rate of climb: 12,000 ft/min at sea level (61 m/s)
Armament:
2× 30 mm ADEN cannons with 150 rounds per gun
5,300 lb (2,400 kg) of payload on six external hardpoints;
Bombs were usually mounted on outer two pylons as the mid pair were wet-plumbed pylons for
2× 200 gallons drop tanks, while the inner pair was usually occupied by a pair of AIM-9 Sidewinder
AAMs
A wide variety of bombs could be carried with maximum standard loadout being 2x 1,000 lb bombs
or 2x Matra pods with unguided SURA missiles plus 2 drop tanks for ground attacks, or 2x AIM-9 plus
two drop tanks as day fighter
The kit and its assembly:
This project was initially inspired by a set of decals from an ESCI A-4G which I had bought in a lot – I wondered if I could use it for a submission to the “In the navy” group build at whatifmodelers.com in early 2020. I considered an FJ-3M in Australian colors on this basis and had stashed away a Sword kit of that aircraft for this purpose. However, I had already built an FJ variant for the GB (a kitbashed mix of an F-86D and an FJ-4B in USMC colors), and was reluctant to add another Fury.
This spontaneously changed after (thanks to Corona virus quarantine…) I cleaned up one of my kit hoards and found a conversion set for a 1:72 CAC 27 from JAYS Model Kits which I had bought eons ago without a concrete plan. That was the eventual trigger to spin the RAN Fury idea further – why not a navalized version of the Avon Sabre for HMAS Melbourne?
The result is either another kitbash or a highly modified FJ-3M from Sword. The JAYS Model Kits set comes with a THICK sprue that carries two fuselage halves and an air intake, and it also offers a vacu canopy as a thin fallback option because the set is actually intended to be used together with a Hobby Craft F-86F.
While the parts, molded in a somewhat waxy and brittle styrene, look crude on the massive sprue, the fuselage halves come with very fine recessed engravings. And once you have cleaned the parts (NOTHING for people faint at heart, a mini drill with a saw blade is highly recommended), their fit is surprisingly good. The air intake was so exact that no putty was needed to blend it with the rest of the fuselage.
The rest came from the Sword kit and integrating the parts into the CAC 27 fuselage went more smoothly than expected. For instance, the FJ-3M comes with a nice cockpit tub that also holds a full air intake duct. Thanks to the slightly wider fuselage of the CAC 27, it could be mounted into the new fuselage halves without problems and the intake duct almost perfectly matches the intake frame from the conversion set. The tailpipe could be easily integrated without any mods, too. The fins had to be glued directly to the fuselage – but this is the way how the Sword kit is actually constructed! Even the FJ-3M’s wings match the different fuselage perfectly. The only modifications I had to make is a slight enlargement of the ventral wing opening at the front and at the read in order to take the deeper wing element from the Sword kit, but that was an easy task. Once in place, the parts blend almost perfectly into each other, just minor PSR was necessary to hide the seams!
Other mods include an extended front wheel well for the longer leg from the FJ-3M and a scratched arrester hook installation, made from wire, which is on purpose different from the Y-shaped hook of the Furies.
For the canopy I relied on the vacu piece that came with the JAYS set. Fitting it was not easy, though, it took some PSR to blend the windscreen into the rest of the fuselage. Not perfect, but O.K. for such a solution from a conversion set.
The underwing pylons were taken from the Sword kit, including the early Sidewinders. I just replaced the drop tanks – the OOB tanks are very wide, and even though they might be authentic for the FJ-3, I was skeptical if they fit at all under the wings with the landing gear extended? In order to avoid trouble and for a more modern look, I replaced them outright with more slender tanks, which were to mimic A-4 tanks (USN FJ-4s frequently carried Skyhawk tanks). They actually come from a Revell F-16 kit, with modified fins. The refueling probe comes from the Sword kit.
A last word about the Sword kit: much light, but also much shadow. While I appreciate the fine surface engravings, the recognizably cambered wings, a detailed cockpit with a two-piece resin seat and a pretty landing gear as well as the long air intake, I wonder why the creators totally failed to provide ANY detail of the arrester hook (there is literally nothing, as if this was a land-based Sabre variant!?) or went for doubtful solutions like a front landing gear that consists of five(!) single, tiny parts? Sadism? The resin seat was also broken (despite being packed in a seperate bag), and it did not fit into the cockpit tub at all. Meh!
Painting and markings:
From the start I planned to give the model the late RAN A-4Gs’ unique air superiority paint scheme, which was AFAIK introduced in the late Seventies: a two-tone wraparound scheme consisting of “Light Admiralty Grey” (BS381C 697) and “Aircraft Grey” (BS 381C 693). Quite simple, but finding suitable paints was not an easy task, and I based my choice on pictures of the real aircraft (esp. from "buzz" number 880 at the Fleet Air Arm Museum, you find pics of it with very good light condition) rather than rely on (pretty doubtful if not contradictive) recommendations in various painting instructions from models or decal sets.
I wanted to keep things simple and settled upon Dark Gull Grey (FS 36231) and Light Blue (FS 35414), both enamel colors from Modelmaster, since both are rather dull interpretations of these tones. Esp. the Light Blue comes quite close to Light Admiralty Grey, even though it should be lighter for more contrast to the darker grey tone. But it has that subtle greenish touch of the original BS tone, and I did not want to mix the colors.
The pattern was adapted from the late A-4Gs’ scheme, and the colors were dulled down even more through a light black ink wash. Some post-shading with lighter tones emphasized the contrast between the two colors again. And while it is not an exact representation of the unique RAN air superiority scheme, I think that the overall impression is there.
The cockpit interior was painted in very dark grey, while the landing gear, its wells and the inside of the air intake became white. A red rim was painted around the front opening, and the landing gear covers received a red outline, too. The white drop tanks are a detail I took from real world RAN A-4Gs - in the early days of the air superiority scheme, the tanks were frequently still finished in the old USN style livery, hence the white body but fins and tail section already in the updated colors.
The decals became a fight, though. As mentioned above, the came from an ESCI kit – and, as expected, the were brittle. All decals with a clear carrier film disintegrated while soaking in water, only those with a fully printed carrier film were more or less usable. One roundel broke and had to be repaired, and the checkered fin flash was a very delicate affair that broke several times, even though I tried to save and repair it with paint. But you can unfortunately see the damage.
Most stencils and some replacements (e. g. the “Navy” tag) come from the Sword FJ-3. While these decals are crisply printed, their carrier film is utterly thin, so thin that applying esp. the larger decals turned out to be hazardous and complicated. Another point that did not really convince me about the Sword kit.
Finally, the kit was sealed with matt acrylic varnish (Italeri) and some soot stains were added around the exhaust and the gun ports with graphite.
In the end, this build looks, despite the troubles and the rather exotic ingredients like a relatively simple Sabre with Australian markings, just with a different Navy livery. You neither immediately recognize the FJ-3 behind it, nor the Avon Sabre’s bigger fuselage, unless you take a close and probably educated look. Very subtle, though.
The RAN air superiority scheme from the late Skyhawks suits the Sabre/Fury-thing well – I like the fact that it is a modern fighter scheme, but, thanks to the tones and the colorful other markings, not as dull and boring like many others, e. g. the contemporary USN "Ghost" scheme. Made me wonder about an early RAAF F-18 in this livery - should look very pretty, too?
It's that time of year again. Thankfully, it is time to set the clocks BACK so we gain an hour's sleep this weekend. Unfortunately, it also means that we get up when it is dark and eat our evening meal when it is dark. Days can get extremely short of daylight. I don't know how people in some areas manage to handle all the darkness they get during certain parts of the year.
+++ DISCLAIMER +++
Nothing you see here is real, even though the conversion or the presented background story might be based on historical facts. BEWARE!
Some background:
As the Luftwaffe (German Air Force) lost control over the skies over Germany in the second half of the Second World War, it could no longer provide sufficient protection against Allied aircraft. Panzer divisions were especially affected by the lack of cover from fighter aircraft because they were always at the center of the most intense fighting.
The Germans already had copious amounts of half-tracked Self-Propelled Anti-Aircraft Guns (SPAAG) of different calibers and weights (Sd.Kfz.10/4, Sd.Kfz.6/2, Sd.Kfz.7/1, etc.). As these vehicles had very limited or no armor, they were vulnerable to enemy fire either from ground or air. The crew needed better protection from small arms fire and artillery/mortar high explosive fragmentation shell shrapnel. A tank-based anti-aircraft vehicle (Flakpanzer) could solve this problem, as it would have sufficient armor to resist most ground attacks with the exception of larger caliber guns. They would also provide some protection against air attacks, but even tanks could be destroyed by air ground-attack fire.
Many designs based on different Panzer chassis and weapons were tested and built during the war. The most successful early ones were based on the Panzer IV chassis (Möbelwagen, Wirbelwind and Ostwind), but one of the major shortcomings of all German Flakpanzers was the lack of a fully enclosed fighting compartment. As all were open-topped (because of easier construction, easier exhaust of gun fumes and the need to produce them as fast as possible), the gun crews were exposed to air attacks and the weather.
As the war progressed, German engineers tried to solve this problem by designing and building new Flakpanzers with fully enclosed turrets, based on later and bigger tank chassis’. One of these was the Flakpanzer based on the Panther tank, best known today as the ‘Coelian’, which was a new turret that could take various gun armaments.
The path to the Coelian SPAAG was not straight. In May 1943, Oberleutnant Dipl. Ing von Glatter-Götz, responding to the orders of Inspectorate 6, initiated the development of a new series of Flakpanzers based on already existing chassis. The Panzer I and II were outdated or used for other purposes. The Panzer III tank chassis was earmarked for the production of the StuG III and thus not available. The Panzer IV and the Panzer V Panther were considered next. The Panzer IV tank chassis was already in use for several German modifications, so it was decided to use it for the Flakpanzer program, eventually leading to the light “Kugelblitz” SPAAG. The Panzer V Panther was considered in case even the Panzer IV chassis proved to be inadequate for the task. Furthermore, the development of a whole new tank generation, the “Einheitspanzer” or “E-Serie”, had just been initiated.
The Germans formed a commission for the analysis of the effectiveness of enemy ground attack planes. The report (dated 31st June 1943) stated that, in the case of dive-bombing, the lowest point that the enemy plane reached was 1.200 to 1.500 m at an angle of 45-80°. Planes using larger caliber machine guns or cannons attacked at an altitude of around 150 to 300 m. The committee suggested that the best way to bring down enemy planes was using direct fire autocannons. To effectively fight the enemy planes, the future Flakpanzer would have to have a fully rotating turret with a high angle of fire and the caliber used should not be lower than 2 cm, with the more powerful 3.7 cm being preferred.
To give the crew the best protection possible and to meet any future Allied developments, the Panther-based Flakpanzer had to have a fully enclosed turret that could be armed with several different proposed weapon configurations. These included the 2 cm Flakvierling, 3.7 cm Flak either in twin or triple configuration, a newly developed 5.5 cm Gerät 58 Flakzwilling and even the powerful 88 mm caliber heavy anti-aircraft gun. The new turret design was to be ready for frontline service by the middle of 1944.
The first proposed design drawings were completed by Rheinmetall under the internal project number H-SkA 82827 in late May 1943 with the title “Turm Panther II mit Vierling MG 151/20”. This turret was heavily based on the Panther’s standard turret that it would simply replace. The new turret had to fulfill several set criteria like armor thickness and having an effective traversing mechanism. The armor protection of the turret was impressive, with 80 mm frontal armor and 40 mm on the sides. The turret was to be moved by using a hydraulic drive which was powered by the tank’s own engine. The maximum traverse speed was around 36° per second. Hydraulic power was used to raise the weapons, too, but a manual drive option was included as a fallback option.
The H-SkA 82827’s armament consisted of four 20 mm MG 151/20, mounted in staggered pairs, the same armament carried by the contemporary Panver IV-based “Möbelwagen” and “Wirbelwind” SPAAGs, too, but now under full armor protection. The elevation of the four guns was -5° to +75° and they had a combined practical rate of fire of 800 RPM, even though a maximum ROF of 1680 to 1920 RPM was theoretically possible. The weapons had a muzzle velocity of 900 m/s, a range of 4.800 m (15,720 ft) and an effective ceiling of 3.700 m (12,120 ft). They were belt-fed and separated from the turret crew, the gunner and the commander, which were seated in the left of the turret, weapons and ammunition were placed on the right side. The commander sat behind the gunner in an elevated position under a cupola, adapted from the Panther battle tank, for a good all-round view. Thanks to the belt-fed guns, no dedicated loader was necessary anymore, saving internal weight and space. The rest of the crew, driver and radio/machine gun operator, were seated in the Panzer V hull’s front in their standard positions.
After a wooden mock-up had been built, inspected and approved by the Heeresinspektorat 6, the go-ahead for the construction of five prototype turrets was given in September 1943, to be mounted and tested on refurbished Panther hulls. The new vehicle received the official designation Sd.Kfz. 171/1 “Flakpanzer V/20 mm”. On the 21st of December 1943, however, a Panzerkommision was formed to examine the further development of a Flakpanzer based on the Panther tank chassis. It was decided that the main armament should consist of at least two 3.7 cm caliber anti-aircraft guns, for more range and firepower, and this requirement was later revised to two even heavier 5.5 cm Gerät 58 guns. The Luftwaffe’s 30 mm MK 103 machine cannon was considered, too, since it had outstanding range, accuracy and penetration.
The problem was now that the Sd.Kfz. 171/1’s turret did not offer enough space or development potential to accommodate these heavier and bigger weapons, so that a completely new turret had to be designed from scratch around them. Daimler-Benz was chosen for this follow-up project, which was internally called “Flakpanzer 341” – after the SPAAG’s planned main armament with an experimental 3.7 cm (L/77) Flak 341 twin gun, also known as “Gerät 341”. In mid-1944 it would evolve into the Panther-based Coelian SPAAG family, but even this more sophisticated design with several armament variants became just a stopgap solution, bridging the delay of the anti-aircraft tanks based on the new Einheitspanzer chassis family.
Serial production of the Sd.Kfz. 171/1 was consequently dropped, only three fully operational prototypes were completed by March 1944, plus two armed turrets for static test. One of these turrets was later mounted onto another Panther hull, for a fourth operational vehicle. Rheinmetall kept on working with these vehicles and components until late 1945, and the four SPAAGs were also employed by the company’s Werksverteidigung unit (manned by the Rheinmetall staff, not by Wehrmacht soldiers) at the Apolda factory in central Thuringia.
The Sd.Kfz. 171/1s and the separate turrets were also used in the development programs for Rheinmetall’s so-called “Einheits-Flakturm” for the upcoming E-50/75 SPAAGs, primarily for targeting and rangefinding systems, weapon mounts and simplified turret movement mechanisms. One of these developments was the Kommandogerät 44, a much more compact analogue rangefinder, effectively an analogue fire control calculator that translated target and ambient data into electronic signals that could control weapon drives and trigger a weapon at an ideal moment. This innovative device eventually became part of the later E-50/75 SPAAGs that entered service in 1946.
The fate of these four unique vehicles after the factory’s invasion through Soviet troops is uncertain, though. They were probably destroyed by retreating German troops to prevent their experimental technologies from falling into enemy hands.
Specifications:
Crew: Four (commander, gunner, driver, radio-operator/hull machine gunner)
Weight: 40.5 tonnes (39.9 long tons; 44.7 short tons)
Length (hull only): 6.87 m (22 ft 6 in)
Width: 3.42 m (11 ft 3 in)
Height: 3.06 m (10 ft 2/3 in)
Suspension: Double torsion bar, interleaved road wheels
Fuel capacity: 720 litres (160 imp gal; 190 US gal)
Armor:
15–80 mm (0.6 – 3.15 in)
Performance:
Maximum road speed: 55 km/h (34 mph)
Operational range: 250 km (160 mi)
Power/weight: 15.39 PS (11.5 kW)/tonne (13.77 hp/ton)
Engine:
Maybach HL230 P30 V-12 petrol engine with 700 PS (690 hp, 515 kW)
ZF AK 7-200 gear; 7 forward 1 reverse
Armament:
4× 20 mm (0.787 in) MG 151/29 machine cannon in two twin mounts with a total of 3.200 rounds
1× 7.92 mm MG 34 machine gun in the front glacis plate with 2.500 rounds
The kit and its assembly:
This is an OOB what-if model, the prototype of the “Panther 20mm Flakvierling MG 151/20” from Dragon. The kit is actually mislabeled as “Flakpanzer 341”, but this designation had been allocated to the later prototype of the “Coelian” turret for the Panther chassis, just as described in the background. AFAIK, the “Panther 20mm Flakvierling MG 151/20” was not produced at all, there was just a wooden mock-up. And the whole project was quickly cancelled because it did not offer sufficient firepower and development potential. The only “official” designation I could find is the title of a project paper that describes the turret’s layout and construction, and it was called “H-SkA 82827.
But what if a small batch of these vehicles had been manufactured/completed and used by factory defense units like the Luftwaffe’s Werkschutzstaffeln?
That’s the basic idea/story behind this build, and it was kept OOB. The Dragon Panther is a simple affair and goes together well, but the instructions are weak, if not confusing. Good thing, though, is that the kit contains an extra sprue from a Jagdpanther kit that contains many optional parts for early and late Panther variants, as well as hull equipment, so that you get a good number of surplus parts for the spares box. The only downer is the fact that the soft vinyl tracks were molded in a bright sand tone, so that these delicate parts had to be completely painted.
Painting and markings:
The Panther 20mm Flakvierling is – even though it never “existed” – frequently depicted in a weird two-color scheme, probably consisting of Dunkelgelb (RAL 7028) over a red primer coat. But the depicted colors frequently appear much too garish and strong, like bright sunflower yellow over wine red! WTF? However, I liked the concept and adopted it for the model, just with more realistic tones and some personal twists.
The hull received an overall coat with RAL 3009 (Oxidrot), while the turret was painted with a paler shade of red (Humbrol 70, Brick red). On top of that, thinned Tamiya XF-57 (Buff) was used to add a fragmented meander pattern to break up the tank’s outlines. The result is quite attractive, and it might have worked well in an urban/factory environment – hence the idea of allocating the vehicle to a Werksschutz unit – several aircraft companies, e. g. Heinkel or Focke Wulf, also used prototypes for local defense, organized outside of Luftwaffe units.
To emphasize the prototype nature of this vehicle, the wheels and the armor skirts were, for some variety, painted in standard Hinterhalt camouflage colors, in Dunkelgelb (Tamiya XF-60), Olivgrün (RAL 6003, Humbrol 86) and Rotbraun (RAL 8017, Humbrol 160). The latter was also used for the engine bay cover, which I simply forgot to paint on Oxidrot in the first place. But the slightly darker Rotbraun blends well into the rest of the hull. The wheels were painted uniformly, and I added a wheel in Brick Red on each side as an un-camouflaged replacement. The armor skirts’ camouflage pattern consists of dark circles over a Dunkelgelb background, created with a stamp (self-made from fine sponge rubber) and mimicking the original “factory design” of the Hinterhalt paint scheme.
As mentioned above, the tracks had to be painted, and this time I tried a base with acrylic black paint from the rattle can, plus some grey and re brown wet-in-wet acrylic paint on top of that. Worked quite well and might become a new standard for this field of work.
The tactical markings became minimal, as the vehicle would be factory-operated and also a test article – hence it just received small Balkenkreuz insignia (on the hull ,mostly obscured by tools), and a large black “3”, edged in white for more contrast, on the turret sides, with smaller numbers at front and back of the turret for quick identification from every side.
The model received an overall washing with thinned dark brown acrylic paint and dry-brushing with light grey and beige, before it was sealed with matt acrylic varnish. Once the vinyl tracks had been mounted, the model’s lower areas and the running gear were dusted with grey-brown mineral pigments.
Well, another simple build, thanks to an OOB kit of this exotic SPAAG prototype. The result looks quite good and was completed in just two days, another member in my growing collection of real, semi-fictional and whiffy German SPAAG vehicles – turning this mock-up into an of an operational prototype of a Werksverteidigung unit certainly works and could actually have been, even though the Panther 20mm Flakvierling MG 151/20 just remained a stillborn proposal.
I had a hard time settling on one photo over any of the others. The fallback was to use multiples if I ran out of time and needed a photo to fill a day, but it never came to that.
German postcard by Ross Verlag, Berlin, no. 708/1, 1925-1926. Photo: Transocean-Film-Co, Berlin.
May McAvoy (1899-1984) was an American actress of the silent screen, best known as Esther in the classic epic Ben-Hur (Fred Niblo, 1925).
Born in New York City in 1899, within a well-to-do family that owned and operated a livery stable, May left school at the age of 17 to act in her first role in the film Hate by Walter Richard Stahl. From then she had small parts, even uncredited roles in films, for various Californian film companies, until she did a few films for the J. Stuart Blackton Company. Blackton, the co-founder of and regular director at Vitagraph, had started his own production company in 1917. After two smaller parts in films for the company, she got her first lead in The House of the Tolling Bell (1920), a mystery film about a haunted house, directed by Blackton himself. Blackton let her star again, again opposite Bruce Gordon, in The Forbidden Valley (1920). In 1921 she acted e.g. in Chester M. Franklin's A Private Scandal, which script had been purposely written by Hector Turnbull for McAvoy. The film was the first of a series of seven films at Realart Pictures, in which McAvoy constantly starred, directed either by Frank O'Connor or William Desmond Taylor. The apparent success of these films convinced Paramount to lure her away with a contract. Petite as she was, McAvoy was independent enough to defend her interests.
In 1922 May McAvoy started to act at Paramount/ Famous Players-Lasky, where she already had done an occasional film in the past. It was William C. DeMille who mostly directed her at Paramount: in Clarence (1922), starring Wallace Reid and Agnes Ayres, Grumpy (1923), starring Theodore Roberts, Only 38 (1923), in which she herself had the lead, and The Bedroom Window (1924), another starring role with Malcolm McGregor and Ricardo Cortez as her co-stars, and probably McAvoy's last film for Paramount. In 1923 McAvoy got into a row with director-producer Cecil B. DeMille, because she refused the role in his film Adam's Rib, as it meant her hair would be bobbed and she had to show partial nudity. Instead, she complained parts she wanted were given to other actresses: to Betty Bronson in Peter Pan and to Betty Compson in Little Minister. After she had been suspended, she bought off her contract and started freelancing.
This didn't mean a fallback at all, as May McAvoy managed to play memorable parts in e.g. The Enchanted Cottage (John S. Robertson, 1924) starring and produced by Richard Barthelmess, Tessie (Dallas M. Fitzgerald, 1925) and in particular Lady Windermere's Fan (Ernst Lubitsch, 1925) with Ronald Colman, while McAvoy replaced Gertrude Olmstead in her best known silent film, MGM's classic super production Ben-Hur: A Tale of the Christ (Fred Niblo 1925). McAvoy played Esther, the love interest of the title character, played by Ramon Novarro. Her former rival at Paramount, Betty Bronson, would play the small part of the Virgin Mary. Two years after, McAvoy had an important part in what is often credited as the first sound feature, The Jazz Singer (Alan Crossland 1927), which, actually, was a part-talkie, in which most actors, including McAvoy, did not talk yet. She played Mary, girlfriend of the male lead, played by singer-actor Al Jolson.
Afterward, May McAvoy did act in all-talkie movies, such as The Lion and the Mouse (Lloyd Bacon, 1928), and The Terror (Roy Del Ruth, 1928), shot at Warner's studio in Burbank with failing technology, distorting her voice. Not so much because of her voice, but on request of her new (1929) husband, Maurice Cleary, banker and treasurer of United Artists, she withdrew to private life and took care of their son, Patrick (1932-2012). Despite some sources write they remained married until his death, English Wikipedia has convincing proof they divorced in 1940. It also explains that in 1940 McAvoy went back to the set, but had to satisfy with bit parts. Hollywood was not kind to its former stars. Still, until 1959 she had small parts, even uncredited ones - her last part being an extra in the remake of Ben-Hur (1959) by William Wyler, himself a former assistant-director on the silent version. May McAvoy died on April 26, 1984, in Los Angeles, as the consequence of a heart attack one year earlier. She was interred in the Holy Cross Cemetery in Culver City. May McAvoy has a star on the Hollywood Walk of Fame at 1731 Vine Street.
Sources: Dave Lobosco on greatentertainersarchives.blogspot.com/2013/07/may-mcavoy..., Wikipedia (English and German), and IMDb.
...I didn't imagine you'd use an armour-piercing pigeon!"
Artimino's medieval clock tower was actually not damaged by pigeons, but by American shelling during the village's liberation from German occupation in World War 2.
Demo In World:
maps.secondlife.com/secondlife/The%20Nest/167/35/23
Marketplace:
marketplace.secondlife.com/p/TWS-Pot-Head/26981612
Includes texture hud with 15 tags tintable via the hud, the hud has 2 buttons, press the button that says "Tint Pot" and then select your color from the tint window, and to tint the tag you press the button called "Tint Tag" and then select color from the tint window.
You can also put your own texture on the front tag by dragging and dropping your image.
-------------------------
-2 Prim
-Copy/Mod
-Original Mesh
-PBR + Legacy Textures
⸸⸸⸸⸸ Blog Post⸸⸸⸸
⁶⁶⁶sponsored⁶⁶⁶
| Wraith |
═══════════ ⛧ ═══════════
Wraith x CUPID'S FAULT
☆Amore☆
▬Rigged for▬
ʚReborn(+Waifu, +Teacups, +V-Tech)
ʚLegacy(+Bombshell, +Perky, +Petite, +V-Tech)
ʚMaitreya Lara X(+Petite X, +Flat X)
▬Includes▬
ʚDress
ʚC-String
ʚTucked Bulge C-String included
ʚPBR ONLY no fallback
♦32 color options with tinting, 11 print options, Latex, Satin, Cotton & Velvet HUD♦
⛧Socials⛧
Discord: discord.gg/kPtu9Ws9sS
DeviantArt : www.deviantart.com/wraithsl
Twitter : twitter.com/EzraSavage6
Flickr: www.flickr.com/photos/sixxstore/
Facebook: www.facebook.com/wraithsl
Instagram : www.instagram.com/wraith.sl/
═══════════ ⛧ ═══════════
New for Wasteland, opening July 30!
Cobble together your very own Wastemart trading post with this kit!
Includes:
-Wastemart Stall in 6 colors (green, blue, gray/black shown in ad; red, orange, white also included), 5 LI each
-Wastemart Stall Signs - 7 premade signs (supplies, armor, weapons, booze, grub, fix it, chems), plus 1 blank sign you can put a transparent texture or logo on if you wish; each 1 LI
-Wastemart Sign 1 LI
-Wastemart Light - includes static light version, flickering with a buzzing/electric sound, and silent flickering. Place above window to illuminate wares and/or inside on the ceiling! Each is 1 LI.
Copy/Mod/Original mesh. PBR plus fallback textures. Ads were shot in Midday lighting with cloud color changed to green, using reflection probe around the scene.
· ▸ Usva Retro Collection single purchase is available in:
ㅤㅤ• PG version
ㅤㅤ• Adult version
ㅤㅤ• Usva Modular Sofa · PG version
ㅤㅤ• Usva Modular Sofa · Adult version
ㅤㅤ• Usva Column
ㅤㅤ• Usva "Paradise" Neon Sign
ㅤㅤ• Usva Vaporwave Fountain
· ▸ Usva Retro Collection includes:
ㅤㅤ• PBR Textures
ㅤㅤ• FallBack Textures
ㅤㅤ• HUD
· ▸ Fatpacks are available
· ▸ Retro Vapor Wave Feeling Guaranteed!
· ▸ Copy
· ▸ Modify
· ▸ No Transfer
ㅤㅤｓｈｏｐ ｔｈｉｓ ａｔ ｅｑｕａｌ１０ 苛 尉 ズ ょ ド
ㅤㅤ
▸ Ｊｏｉｎ ｕｓ ｏｎ Ｐｒｉｍｆｅｅｄ
ㅤㅤ
▸ Ｊｏｉｎ ｕｓ ｏｎ Ｆａｃｅｂｏｏｋ
ㅤㅤ
▸ Ｊｏｉｎ ｕｓ ｏｎ Ｉｎｓｔａｇｒａｍ
ㅤㅤ
▸ Ｊｏｉｎ ｕｓ ｏｎ Ｙｏｕｔｕｂｅ
ㅤㅤ
▸ Main Sim
ㅤㅤ
ㅤㅤ
◆ Unrigged, Resize in HUD
◆ PBR&BP
◆ 10% off at DisturbeD Event
◆ 7 Metal Colors
◆ PBR&Fallback
◆ Copy/Modify/No Transfer
Available exclusively at the DisturbeD anniversary round, open November 6-29!
Landmark: maps.secondlife.com/secondlife/Elites/228/190/580
•───────✧───────•
Tealeaf Treasures has a Discord community! Enjoy WIP streams and early notifications on events, releases, and more! discord.gg/DgaygTR3j7
· ▸ Brooks Collection single purchase is available in:
ㅤㅤ• Brooks Outdoor Sofa · PG
ㅤㅤ• Brooks Outdoor Sofa · Adult
ㅤㅤ• Brooks Outdoor Chair · PG
ㅤㅤ• Brooks Outdoor Chair · Adult
ㅤㅤ• Brooks Coffee Table
ㅤㅤ• Palm Vase
ㅤㅤ• Brooks Lantern
ㅤㅤ• Brooks Umbrella
ㅤㅤ• Brooks Rug
ㅤㅤ• Brooks Throw Pillow
· ▸ Brooks Collection includes:
ㅤㅤ• PBR version
ㅤㅤ• Fallback version
· ▸ Copy
· ▸ Modify
· ▸ No Transfer
ㅤㅤｓｈｏｐ ｔｈｉｓ ａｔ ｅｑｕａｌ１０ 苛 尉 ズ ょ ド
ㅤㅤ
▸ Main Sim
ㅤㅤ
ㅤㅤ
ㅤㅤ
▸ Ｊｏｉｎ ｕｓ ｏｎ Ｐｒｉｍｆｅｅｄ
ㅤㅤ
▸ Ｊｏｉｎ ｕｓ ｏｎ ＭｙＳｎａｐ
ㅤㅤ
▸ Ｊｏｉｎ ｕｓ ｏｎ Ｆａｃｅｂｏｏｋ
ㅤㅤ
▸ Ｊｏｉｎ ｕｓ ｏｎ Ｉｎｓｔａｇｒａｍ
ㅤㅤ
▸ Ｊｏｉｎ ｕｓ ｏｎ Ｙｏｕｔｕｂｅ
· ▸ Sneaky Bush includes:
ㅤㅤ• Multiple Animations
ㅤㅤ• Particles
ㅤㅤ• Sounds Enabled
ㅤㅤ• Fallback textures
ㅤㅤ• PBR textures
· ▸ Copy
· ▸ Modify
· ▸ No Transfer
ㅤㅤｓｈｏｐ ｔｈｉｓ ａｔ ｅｑｕａｌ１０ 苛 尉 ズ ょ ド
ㅤㅤ
▸ Ｊｏｉｎ ｕｓ ｏｎ Ｐｒｉｍｆｅｅｄ
ㅤㅤ
▸ Ｊｏｉｎ ｕｓ ｏｎ Ｆａｃｅｂｏｏｋ
ㅤㅤ
▸ Ｊｏｉｎ ｕｓ ｏｎ Ｉｎｓｔａｇｒａｍ
ㅤㅤ
▸ Ｊｏｉｎ ｕｓ ｏｎ Ｙｏｕｔｕｂｅ
ㅤㅤ
▸ Main Sim
ㅤㅤ
ㅤㅤ
Flowers: Reliable subject as always.
The past few days have been hectic with no time to take photos - used my fallback as the subject of the day.
FALL BACK. Set your clocks back 1 hour on November 1, 2015 at 2 AM.
Daylight Saving Time (DST) will end at exactly at 2:00 am on Nov 1st 2015.
Before you go to bed on Saturday night, 10/31/15, remember to “fall back” by setting your clocks back one hour
(The exceptions to DST are Arizona, Hawaii, Puerto Rico, the Virgin Islands, and American Samoa.)
Mornings will get lighter. Evenings darker earlier. That means we will get an extra hour of sleep.
+++ DISCLAIMER +++
Nothing you see here is real, even though the conversion or the presented background story might be based historical facts. BEWARE!
Some background:
The Westland Whirlwind was a British heavy fighter developed by Westland Aircraft. It was the Royal Air Force's first single-seat, twin-engine, cannon-armed fighter, and a contemporary of the Supermarine Spitfire and Hawker Hurricane.
A problem for designers in the 1930s was that most agile combat aircraft were generally small. These aircraft had limited fuel storage and only enough flying range for defensive operations, and their armament was relatively light, too. A multi-engine fighter appeared to be the best solution to the problem of range, but a fighter large enough to carry an increased fuel load might be too unwieldy to engage successfully in close combat. Germany and the United States pressed ahead with their design programs, resulting in the Messerschmitt Bf 110 and the Lockheed P-38 Lightning.
The Westland Whirlwind was one of the British answers to more range and firepower, and the first Whirlwind prototype (L6844) flew on 11 October 1938. Construction had been delayed chiefly due to some new features and also to the late delivery of the original Peregrine engines. The Whirlwind was of all-metal construction, with flush riveting, and featuring magnesium skinning on the rear fuselage. The control surface arrangement was conventional, with large one-piece Fowler flaps inboard and an aileron outboard on each wing, with the rear end of the engine nacelles hinging with the flaps; elevators; and a two-piece rudder, split to permit movement above and below the tail plane. Slats had been fitted on the outer wings at the outset as a stall protection measure, but they were soon locked down, having been implicated in an accident.
Service trials were carried out at Martlesham Heath, where the new type exhibited excellent handling and was very easy to fly at all speeds. It was one of the fastest aircraft in service when it flew in the late 1930s, and was much more heavily armed than any other fighter, toting four 20mm cannons.
However, protracted development problems with its Rolls-Royce Peregrine engines delayed the entire project. The combat radius also turned out to be rather short (only 300 miles), and the landing speed was relatively high, which hampered the type's utility. The major role for the Whirlwinds, however, became low-level attack, flying cross-channel "Rhubarb" sweeps against ground targets and "Roadstead" attacks against shipping.
Time went by and worked against the Whirlwind, though: By 1940, the Supermarine Spitfire was mounting 20 mm cannons as well, so the "cannon-armed" requirement was already met by lighter and simpler aircraft. Furthermore, the role of an escort fighter was becoming less important by this time, as RAF Bomber Command turned to night bomber missions.
The main qualities the RAF was looking for now in a twin-engine fighter were range and carrying capacity, e .g. to allow the large radar apparatus of the time to be carried as a night fighter. Concerning these requirements, the bigger Bristol Beaufighter and the fast De Havilland Mosquito could perform just as well as or even better than the Whirlwind.
Anyway, the Whirlwind's potential had not been fully exploited yet, and it was decided to adapt it to new roles and specialized duties, which would exploit its good low altitude handling. Such an opportunity arose when Allied Forces prepared for Operation Torch (initially called Operation Gymnast) in 1942, the British-United States invasion of French North Africa: the somewhat outdated aircraft was retrofitted for a new task as a dedicated tank hunter.
Background was the experience with the Hawker Hurricane Mk. IID, which had become operational at that time. The Mk IIDs were dedicated to ground support, where it was quickly learned that destroying German tanks was difficult; the Hurricanes’ standard 20mm cannons (the same the Whirlwind fighter originally carried) did not have the performance to punch through Gerrnan tanks’ armor, and bombing small tank target successfully was almost impossible.
The solution was to equip aircraft with 2 pounder (40 mm) cannon in a pod under each wing, reducing the other armament to a single Browning in each wing loaded with tracers for aiming purposes.
This equipment was originally tested on a converted Mk IIB in late 1941, and proved to be successful. A new-build Hurricane version of what was known as the Mk IID started in 1942, which, beyond the modified armament, also included additional armor for the pilot, radiator and engine. The aircraft were initially supplied with a pair of Rolls-Royce 'BF' ('Belt-Fed') guns and carried 12 rounds, but this was soon changed to the 40 mm (1.57 in) Vickers S gun with 15 rounds. The weight of the guns and armor protection had a detrimental effect on the aircraft's performance, though, and for the African environment it was feared that the liquid-cooled Merlin engine was too complicated and would hardly cope with the higher ambient temperatures.
A fallback option was needed, and the Whirlwind appeared to be a sound basis – even though the troublesome Peregrine engines were rejected. In a hurry, a Whirlwind Mk. I (P7102) was modified to carry a pair of 40 mm guns, but this time in the lower nose. Compared with the Hurricane’s wing-mounted pods the Whirlwind could carry a slightly bigger load of ammunition (20 RPG). For aiming purposes and against soft targets, a pair of 0.303" (7.7 mm) Browning machine guns with tracer ammunition was mounted above them.
In order to make the aircraft more resilient to the North-African temperatures and against damage, the Whirlwind's touchy Peregrines were replaced by a pair of Bristol Taurus radial engines under relatively narrow cowlings. The engine nacelles had to be widened accordingly, and the Peregrines’ former radiator intakes and installations in the wing roots were removed and simply faired over. Similar to the Hurricane Mk. IID, additional armor plating was added around the cockpit and the engines, raising overall weight.
Flight and weapon tests were conducted in early 1942. While the radial-powered Whirlwind was not as nimble and fast as the original, Peregrine-powered fighter anymore, the aircraft proved to be a stable weapon platform and fully suitable for the ground attack role. Due to its characteristic new nose with the two protruding gun barrels and their separate fairings, the machine was quickly nicknamed “Walrus” and “Buck teeth Whirlwind”.
For operation Torch and as a field test, a total of eleven Whirlwind Mk. Is were converted to Mk. Ic standard. The machines received new serials and were allocated to RAF No. 73 Squadron, which was preparing for deployment to Northern Africa and the Middle East after having been engaged in the Battle of Britain.
The squadron's Whirlwinds and Hurricanes (including some cannon-armed Mk. IIDs, too) were shipped to Takoradi on the Gold Coast onboard HMS Furious, and were then flown in stages across Africa to Egypt.
No. 73 Squadron took part in the series of campaigns in the Western Desert and Tunisia, helping cover the supply routes to Tobruk and taking part in various ground-attack operations.
Both types undertook an anti-tank role in limited numbers during the North African campaign where, provided enemy flak and fighters were absent, they proved accurate and highly effective, not only against armored vehicles but all kinds of motorized transport.
The converted Whirlwinds proved, thanks to their robust engines, to be very reliable and had a better operational status than the Hurricanes. The second engine boosted the pilots' confidence. In direct comparison, the cannon-armed Whirlwind proved to be a better weapon platform than the Hurricane – mainly because the heavy guns were mounted closer to the aircraft’s longitudinal axis. Both aiming and accuracy were better than the Hurricanes’ wing-mounted weapons.
Nevertheless, there were several drawbacks: the Whirlwind’s two engines meant that more service hours had to be spent on them for maintenance, binding ground crew capacities. This was very inconvenient during the highly mobile Northern Africa campaign. Additionally, the Whirlwind's higher fuel consumption and the limited fuel provisions in the Northern African theatre of operations with dispersed and improvised airfields eventually meant that, despite positive results, no further machines were converted. The high landing speed also persisted, so that operations were hazardous.
Eventually the Hurricane Mk IID was adopted for the tank hunter role, with ensuing series production, since it was regarded as the more versatile and also more common type.
The radial-powered Whirlwind Mk. Ic remained operational with No. 73 Squadron until June 1943, when the squadron converted to the Spitfire and moved from Northern Africa to Italy in October. Until then, only six Whirlwinds had remained airworthy.
General characteristics:
Crew: One pilot
Length: 31 ft 7 1/4 in (9,65 m)
Wingspan: 45 ft 0 in (13.72 m)
Height: 11 ft 0 in (3.35 m)
Wing area: 250 ft² (23.2 m²)
Airfoil: NACA 23017-08
Empty weight: 9,400 lb (4,267 kg)
Loaded weight: 12,158 lb (5,520 kg)
Max. take-off weight: 13,120 lb (5,946 kg)
Powerplant:
2× Bristol Taurus II 14-Cylinder sleeve valve radial engines, 1,015 hp (760 kW) each
Performance:
Maximum speed: 400 mph (644 km/h) at 15.000 ft (4.570 m)
Stall speed: 95 mph (83 knots, 153 km/h) with flaps down
Range: 800 mi (696 nmi, 1.288 km)
Service ceiling: 33.500 ft (10.970 m)
Armament:
2x belt-fed two pounder (1.57 in/40 mm) Vickers S cannon, 20 RPG each
2x 0.303 in (7.7 mm) Browning machine guns, 500 RPG (typically armed with tracer rounds)
Option for 2x 250 lbs (115 kg) or 500 lbs (230 kg) bombs under the outer wings
The kit and its assembly
My third whiffed Westland Whirlwind - I must say that this rather obscure aircraft type has some serious potential for mods and fictional uses. The inspiration for this radial-powered variant originally came from a profile drawing of fellow modeler and illustrator FrancLab at flickr.com, who had drawn more than twenty(!) fictional Whirlwinds (check this: www.flickr.com/photos/franclab/16724098644/in/faves-14802...), including one with radial engines and in RAF Tropical Scheme colors.
The kit is, again, the vintage Airfix offering. Modifications center around the engines and the nose section, the rest remained basically OOB.
I already had to learn with my first Whirlwind conversion that mounting bigger engines on this compact aircraft is not easy, and radials, with their bigger diameter and consequentially more voluminous nacelles, would be a challenge from the design perspective.
Figuring out a solution that would be feasible and not make the sleek Whirlwind look like Popeye was not easy. I considered the transplantation of complete engine nacelles from a Matchbox Bristol Beaufighter, but eventually refrained from this idea because everything would be at least one size too big... a mistake I had done before, with very mixed results.
After several trials, I settled on a compromise, because I could not find a satisfactory 'British' solution, at least in my spares vault: the implantation of "foreign" material in the form of cowlings and nacelles from an Airfix Mitsubishi Ki-46.
The transplantation started with the removal of the original Peregrine engine nacelles from the lower wing section and gluing these to the upper half, which remained intact. Then the Ki-46’s lower nacelle half, cut away from the model’s wing in a similar fashion, was grafted onto the Whirlwind’s lower wing, ensuring that the landing gear attachment points would match with the new openings. This stunt worked very well!
As a final step, the upper Ki-46 engine nacelle half was placed on top of the Whirlwind wings’ upper side, and the radial engines were used as a ruler for the overall fit. In the end, the modified nacelles sit perfectly in place, and the original distance between the propellers as well as the landing gear’s track width could be maintained, so that the change is rather subtle.
Propellers and spinners were taken from the Airfix Whirlwind, and in order to mount them into the deep and "hollow" Ki-46 cowlings I inserted a styrene tube as a simple adapter, which would also hold the added metal axis' behind the propellers. The parts fit snuggly together.
Details like the exhaust pipes and the carburetor intakes were scratched from sprue material. The landing gear is OOB, but I had to re-create the covers from sheet material since I could only find a single pair of doors from the Ki-46 kit. On the other side, this had the benefit that the material is much thinner.
The original radiator intake slits were closed with putty and blended into the wing’s leading edge.The respective outlets on the trailing edge were sanded away.
For the guns in the nose I added two long, shallow fairings (actually drop tank halves from an Airfix G.91) and re-located the original oils cooler and gun camera fairings under the wing roots.
The original gun mounts were covered with putty, and new openings for the modified armament drilled into the re-sculpted nose section. The 2-pounders' and machine gun barrels are hollow steel needles of different diameters.
Painting and markings:
Staying somewhat true to FrancLab's profile and the North Africa theatre of operations, the paint scheme was more or less pre-defined. The Tropical scheme is a rather unusual look on this sleek aircraft, but works very well!
The standard RAF camouflage pattern for the Whirlwind was retained, but the European colors replaced with Dark Earth (Humbrol 29) and Middle Stone (ModelMaster 2052, the best representation of the tone I could find so far). The undersides were painted with ModelMaster 2055 (US Navy Blue Grey) as an alternative to RAF Azure and Mediterranean Blue.
Interior surfaces were painted with Cockpit Green (Humbrol 78) and slightly dry-brushed with light grey.
The red spinners are typical Desert Force markings, and I added yellow ID markings to the outer wings’ leading edges (created from generic decal sheet). Not certain how authentic this is for Northern Africa, since the Hurricanes did not carry these markings – but the Spitfires did, as well as the few leftover Whirlwinds over Continental Europe? At least, it’s a colorful detail.
Even though many Hurricanes of 73 Squadron in Northern Africa carried the squadron’s colorful pre-war marking on the flanks instead of a two-letter code, I eventually rejected this option. IMHO it might have been simply too much for this whiffy aircraft?
Roundels and markings were puzzled together from the scrap box, the code letters are single digits from Xtradecal aftermarket sheets. I mixed medium sea grey and dull red letters – a practice frequently seen on Northern Africa aircraft (which also frequently did not carry squadron codes at all) in order to improve readability. The serial was puzzled together, too, using a free serial slot according to ukserials.com.
As another individual touch I added a small nose art motif under the cockpit: a Bugs Bunny cartoon toting a shotgun (actually from a P-51 from the late war Pacific TO), as an interpretation of the “Buck teeth” nickname for the aircraft.
Finally, the model was weathered, esp. on the upper surfaces in order to mimic sun bleaching, and some soot stains were added around the guns and the exhaust outlets. The cooling flaps were emphasized through a treatment with Tamiya “Smoke”, which is perfect for oil stains. Finally, the kit was sealed with matt acrylic varnish and finishing touches like the wire antenna and position lights applied.
Another subtle whif, the desert paint scheme is probably distracting enough that, at a casual glance, the radials and the modified nose are not obvious at all. Actually, the Japanese engines look pretty British after some cosmetics, and they are small enough to keep overall proportions in reasonable limits – the sleek Whirlwind quickly turns head-heavy and unbalanced with bigger engines grafted to the airframe! Actually, the converted aircraft looks now, when looked at it head-on, almost like a baby Beaufighter!
New for
Abnormality: Badlands, opening Aug 7!
I'm sure it's totally fine to use these barrels for this purpose and will have no health consequences whatsoever.
Includes 7 versions: radioactive, toxic waste, biohazard, inflammable, corrosive, general hazard, rusted.
Each is 2 LI. Doubles as plain fire barrel or grill. Click the top to turn fire and sound on/off. Click the barrel to show/hide the grill.
As a bonus, the barrel colors are mostly OSHA compliant (with a few artistic liberties).
PBR plus fallback versions.
Copy/Mod/Original mesh.
“Kilauea” Woven Wrinkled Dodecahedrally Truncated Deltoidal Hexecontahedron 120 units In my hand.
A couple months ago I doodled out a simple design pattern and applied some of the principles of Sphere Theory to come up with a new woven solid. This is not what I came up with, but rather was a nice fallback project when the paper proportions I used turned out to be unfeasible for the original project. The nickname refers to the pentagonal truncated caps, which, being low and flat, vaguely resemble shield volcano craters. The geometric description also requires a bit of imagination to picture, but woven solids are notoriously difficult to describe geometrically. The proportions work quite well here, and the original compound I had in mind still remains to be folded.
Designed by me.
Folded out of copy paper.
+++ DISCLAIMER +++
Nothing you see here is real, even though the conversion or the presented background story might be based on historical facts. BEWARE!
Some Background:
The Hawker Typhoon was a British single-seat fighter-bomber, produced by Hawker Aircraft. It was intended to be a medium-high altitude interceptor, as a replacement for the Hawker Hurricane, but several design problems were encountered and it never completely satisfied this requirement.
Even before Hurricane production began in March 1937, Sydney Camm had embarked on designing its successor. Two preliminary designs were similar and were larger than the Hurricane. These later became known as the "N" and "R" (from the initial of the engine manufacturers), because they were designed for the newly developed Napier Sabre and Rolls-Royce Vulture engines respectively. Both engines used 24 cylinders and were designed for over 2,000 hp (1,500 kW); the difference between the two was primarily in the arrangement of the cylinders – an H-block in the Sabre and an X-block in the Vulture. Hawker submitted these preliminary designs in July 1937 but were advised to wait until a formal specification for a new fighter was issued.
In March 1938, Hawker received from the Air Ministry, Specification F.18/37 for a fighter which would be able to achieve at least 400 mph (640 km/h) at 15,000 feet (4,600 m) and specified a British engine with a two-speed supercharger. The armament fitted was to be twelve 0.303” Browning machine guns with 500 rounds per gun, with a provision for alternative combinations of weaponry. The basic design of the Typhoon was a combination of traditional Hawker construction, as used in the earlier Hawker Hurricane, and more modern construction techniques; the front fuselage structure, from the engine mountings to the rear of the cockpit, was made up of bolted and welded duralumin or steel tubes covered with skin panels, while the rear fuselage was a flush-riveted, semi-monocoque structure. The forward fuselage and cockpit skinning was made up of large, removable duralumin panels, allowing easy external access to the engine and engine accessories and most of the important hydraulic and electrical equipment.
The Typhoon’s service introduction in mid-1941 was plagued with problems and for several months the aircraft faced a doubtful future. When the Luftwaffe brought the new Focke-Wulf Fw 190 into service in 1941, the Typhoon was the only RAF fighter capable of catching it at low altitudes; as a result it secured a new role as a low-altitude interceptor.
By 1943, the RAF needed a ground attack fighter more than a "pure" fighter and the Typhoon was suited to the role (and less-suited to the pure fighter role than competing aircraft such as the Spitfire Mk IX). The powerful engine allowed the aircraft to carry a load of up to two 1,000 pounds (450 kg) bombs, equal to the light bombers of only a few years earlier. Furthermore, from early 1943 the wings were plumbed and adapted to carry cylindrical 45 imp gal (200 l; 54 US gal) drop tanks increasing the Typhoon's range from 690 miles (1,110 km) to up to 1,090 miles (1,750 km). This enabled Typhoons to range deep into France, the Netherlands and Belgium.
From September 1943, Typhoons were also armed with four "60 lb" RP-3 rockets under each wing. Although the rocket projectiles were inaccurate and took considerable skill to aim and allow for ballistic drop after firing, "the sheer firepower of just one Typhoon was equivalent to a destroyer's broadside".
By the end of 1943, eighteen rocket-equipped Typhoon squadrons formed the basis of the RAF Second Tactical Air Force (2nd TAF) ground attack arm in Europe. In theory, the rocket rails and bomb-racks were interchangeable; in practice, to simplify supply, some used the rockets only, while other squadrons were armed exclusively with bombs, what also allowed individual units to more finely hone their skills with their assigned weapons.
The Typhoon was initially exclusively operated in the European theatre of operations, but in 1944 it was clear that a dedicated variant might become useful for the RAF’s operations in South-East Asia. In the meantime, Hawker had also developed what was originally an improved Typhoon II, but the differences between it and the Mk I were so great that it was effectively a different aircraft, and it was renamed the Hawker Tempest. However, as a fallback option and as a stopgap filler for the SEAC, Hawker also developed the Typhoon Mk. IV, a tropicalized late Mk. I with a bubble canopy and powered by the new Bristol Centaurus radial engine that could better cope with high ambient temperatures than the original liquid-cooled Sabre engine. The Centaurus IV chosen for the Typhoon Mk. IV also offered slightly more power than the Sabre and the benefit of reduced vulnerability to small arms fire at low altitude, since the large and vulnerable chin cooler could be dispensed with.
3,518 Typhoons of all variants were eventually built, 201 of them late Mk. IVs, almost all by Gloster. Once the war in Europe was over Typhoons were quickly removed from front-line squadrons; by October 1945 the Typhoon was no longer in operational use, with many of the wartime Typhoon units such as 198 Squadron being either disbanded or renumbered.
The SEAC’s few operational Mk IVs soldiered on, however, were partly mothballed after 1945 and eventually in 1947 handed over or donated to regional nascent air forces after their countries’ independence like India, Pakistan or Burma, where they served as fighters and fighter bombers well into the Sixties.
The Burmese Air Force; initially only called “The military”, since there was no differentiation between the army’s nascent servies, was founded on 16 January 1947, while Burma (as Myanmar was known until 1989) was still under British rule. By 1948, the fleet of the new air force included 40 Airspeed Oxfords, 16 de Havilland Tiger Moths, four Austers, and eight Typhoon Mk. IVs as well as three Supermarine Spitfires transferred from the Royal Air Force and had a few hundred personnel.
The Mingaladon Air Base HQ, the main air base in the country, was formed on 16 June 1950. No.1 Squadron, Equipment Holding Unit and Air High Command - Burma Air Force, and the Flying Training School, were placed under the jurisdiction of the base. A few months later, on 18 December 1950, No. 2 Squadron was formed with nine Douglas Dakotas as a transport squadron. In 1953, the Advanced Flying Unit was formed under the Mingaladon Air Base with de Havilland Vampire T55s, and by the end of 1953 the Burmese Air Force had three main airbases, at Mingaladon, Hmawbi, and Meiktila, in central Burma.
In 1953, the Burmese Air Force bought 30 Supermarine Spitfires from Israel and 20 Supermarine Seafires as well as 22 more Typhoon Mk. IVs from the United Kingdom. In 1954 it bought 40 Percival Provost T-53s and 8 de Havilland Vampire Mark T55s from the United Kingdom and two years later, in 1956, the Burmese Air Force bought 10 Cessna 180 aircraft from the United States. The same year, 6 Kawasaki Bell 47Gs formed its first helicopter unit. The following year, the Burmese Air Force procured 21 Hawker Sea Fury aircraft from the United Kingdom and 9 de Havilland Canada DHC-3 Otters from Canada. In 1958, it procured 7 additional Kawasaki Bell 47Gs and 12 Vertol H-21 Shawnees from the United States. Five years later, No. 503 Squadron Group was formed with No. 51 Squadron (de Havilland Canada DHC-3 Otters and Cessna 180s) and No. 53 Squadron (Bell 47Gs, Kaman HH-43 Huskies, and Aérospatiale Alouettes) in Meiktila.
When the non-Burman ethnic groups pushed for autonomy or federalism, alongside having a weak civilian government at the center, the military leadership staged a coup d'état in 1962, and this was the only conflict in which the aging Burmese Typhoons became involved. On 2 March 1962, the military led by General Ne Win took control of Burma through a coup d'état, and the government had been under direct or indirect control by the military since then. Between 1962 and 1974, Myanmar was ruled by a revolutionary council headed by the general. Almost all aspects of society (business, media, production) were nationalized or brought under government control under the Burmese Way to Socialism, which combined Soviet-style nationalization and central planning, and also meant the end of operation of many aircraft of Western origin, including the last surviving Burmese Typhoons, which were probably retired by 1964. The last piston engine fighters in Burmese service, the Hawker Sea Furies, are believed to have been phased out in 1968.
General characteristics:
Crew: One
Length: 32 ft 6 in (9.93 m)
Wingspan: 41 ft 7 in (12.67 m)
Height: 15 ft 4 in (4.67 m)
Wing area: 279 sq ft (25.9 m²)
Airfoil: root: NACA 2219; tip: NACA 2213
Empty weight: 8,840 lb (4,010 kg)
Gross weight: 11,400 lb (5,171 kg)
Max takeoff weight: 13,250 lb (6,010 kg) with two 1,000 lb (450 kg) bombs
Powerplant:
1× Bristol Centaurus IV 18-cylinder air-cooled radial engine with 2,210 hp (1,648 kW) take-off
power, driving a 4-bladed Rotol constant-speed propeller
Performance:
Maximum speed: 412 mph (663 km/h, 358 kn) at 19,000 ft (5,800 m)
Stall speed: 88 mph (142 km/h, 76 kn)
Range: 510 mi (820 km, 440 nmi) with two 500 lb (230 kg) bombs;
690 mi (1,110 km) "clean";
1,090 mi (1,750 km) with two 45 imp gal (200 l; 54 US gal) drop tanks.[65]
Service ceiling: 35,200 ft (10,700 m)
Rate of climb: 2,740 ft/min (13.9 m/s)
Wing loading: 40.9 lb/sq ft (200 kg/m²)
Power/mass: 0.20 hp/lb (0.33 kW/kg)
Armament:
4× 20 mm (0.787 in) Hispano Mk II cannon in the outer wings with 200 rpg
Underwing hardpoints for 8× RP-3 unguided air-to-ground rockets,
or 2× 500 lb (230 kg) or 2× 1,000 lb (450 kg) bombs or a pair of drop tanks
The kit and its assembly:
The Hawker Typhoon is IMHO an overlooked WWII aircraft, and it’s also “underwiffed”. I have actually built no single Typhoon in my 45 years of model kit building - time to change that!
Inspiration was a lot of buzz in the model kit builder community after KP’s launch of several Hawker Tempest kits, with all major variants including the Sabre- and Centaurus-powered types. While the Tempest quickly outpaced the Typhoon in real life and took the glory, I wondered about a Centaurus-powered version for the SEA theatre of operations – similar to the Tempest Mk. II, which just came too late to become involved in the conflict against the Japanese forces. A similar Typhoon variant could have arrived a couple of months earlier, though.
Technically, this conversion is just an Academy Hawker Typhoon Mk Ib (a late variant without the “car door”, a strutless bubble canopy and a four-blade propeller) mated with the optional Centaurus front end from a Matchbox Hawker Tempest. Sounds simple, but there are subtle dimensional differences between the types/kits, and the wing roots of the Matchbox kit differ from the Academy kit, so that the engine/fuselage intersection as well as the wing roots called for some tailoring and PSR. However, the result of this transplantation stunt looked better and more natural than expected! Since I did not want to add extra fairings for air carburetor and oil cooler to the Wings (as on the Tempest), I gave the new creation a generous single fairing for both under the nose – the space between the wide landing gear wells offered a perfect location, and I used a former Spitfire radiator as donor part. The rest, including the unguided missiles under the wings was ordnance, was taken OOB, and the propeller (from the Academy kit) received an adapter consisting of styrene tubes to match it with the Matchbox kit’s engine and its opening for the propeller axis.
Painting and markings:
This was initially a challenge since the early Burmese aircraft were apparently kept in bare metal or painted in silver overall. This would certainly have looked interesting on a Typhoon, too – but then I found a picture of a Spitfire (UB 421) at Myanmar's Air Force Museum at Naypyidaw, which carries camouflage – I doubt that it is authentic, though, at least the colors, which markedly differ from RAF Dark Green/Dark Earth and the bright blue undersides also look rather fishy. But it was this paint scheme that I adapted for my Burmese Typhoon with Modelmaster 2027 (FS 34096, B-52 Dark Green, a rather greyish and light tone) and 2107 (French WWII Chestnut, a reddish, rich chocolate brown tone) from above and Humbrol 145 (FS 35237, USN Gray Blue) below – a less garish tone.
As usual, the model received a black ink washing and post-panel-shading for dramatic effect; the cockpit interior became very dark grey (Revell 06 Anthracite) while the landing gear became Medium Sea Grey (Humbrol 165), as a reminder of the former operator of the aircraft and its painting standards. The red spinner as well as the red-and-white-checkered rudder were inspired by Burmese Hawker Sea Furies, a nice contrast to the camouflage. It's also a decal, from a tabletop miniatures accessory sheet. This contrast was furthermore underlined through the bright and colorful national markings, which come from a Carpena decal sheet for exotic Spitfires, just the tactical code was changed.
After some signs of wear with dry-brushed silver and some graphite soot stains around the exhausts and the guns the model was sealed with matt acrylic varnish.
Voilà, a whiffy Hawker Typhoon – and it looks better than expected. Not only does the brawny Centaurus look good on the rather burly Typhoon, the transplantation worked out better than expected, too. However, with the radial engine the Typhoon looks even more like an Fw 190 on steroids?
· ▸ Theia Hair & Fluffy Ears Hairclip single purchase is available as:
ㅤㅤ• Theia Hair
ㅤㅤ• Fluffy Ears Hairclip
· ▸ Theia Hair includes:
ㅤㅤ• Bangs · Fallback version
ㅤㅤ• Bangs · PBR version
ㅤㅤ• Front Pieces · Fallback version
ㅤㅤ• Front Pieces · PBR version
ㅤㅤ• Texture HUD
ㅤㅤ · 81 Main color textures · HUD 1
ㅤㅤ · 81 Roots color textures · HUD 1
ㅤㅤ · 81 Ombres color textures · HUD 2
ㅤㅤ · 36 Extra color textures · HUD 2
ㅤㅤ · 3 Styles
ㅤㅤ · 2 Materials · Off option
ㅤㅤ · Hairbase · On/Off option
· ▸ Fluffy Ears Hairclip includes:
ㅤㅤ• Texture HUD with many color options
ㅤㅤ• Cat Ear Shape
ㅤㅤ• Bear Ear Shape
ㅤㅤ• With/Without Piercing option
· ▸ Copy
· ▸ Modify
· ▸ No Transfer
ㅤㅤｓｈｏｐ ｔｈｉｓ ａｔ ｅｑｕａｌ１０ 苛 尉 ズ ょ ド
ㅤㅤ
▸ Ｊｏｉｎ ｕｓ ｏｎ Ｐｒｉｍｆｅｅｄ
ㅤㅤ
▸ Ｊｏｉｎ ｕｓ ｏｎ Ｆａｃｅｂｏｏｋ
ㅤㅤ
▸ Ｊｏｉｎ ｕｓ ｏｎ Ｉｎｓｔａｇｒａｍ
ㅤㅤ
▸ Ｊｏｉｎ ｕｓ ｏｎ Ｙｏｕｔｕｂｅ
ㅤㅤ
▸ Main Sim
ㅤㅤ
ㅤㅤ
+++ DISCLAIMER +++
Nothing you see here is real, even though the conversion or the presented background story might be based on historical facts. BEWARE!
Some background:
In the first years of the war, the Wehrmacht had only little interest in developing self-propelled anti-aircraft guns, but as the Allies developed air superiority and dedicated attack aircraft threatened the ground troops from above, the need for more mobile and better-armed self-propelled anti-aircraft guns increased. As a stopgap solution the Wehrmacht initially adapted a variety of wheeled, half-track and tracked vehicles to serve as mobile forward air defense positions. Their tasks were to protect armor and infantry units in the field, as well as to protect temporary forward area positions such as mobile headquarters and logistic points.
These vehicles were only lightly armored, if at all, and rather mobilized the anti-aircraft weapons. As Allied fighter bombers and other ground attack aircraft moved from machine gun armament and bombing to air-to-ground rockets and large-caliber cannons, the air defense positions were even more vulnerable. The answer was to adapt a tank chassis with a specialized turret that would protect the gun crews while they fired upon approaching Allied aircraft. Furthermore, the vehicle would have the same mobility as the battle tanks it protected.
Initial German AA-tank designs were the ‘Möbelwagen’ and the ‘Wirbelwind’, both conversions of refurbished Panzer IV combat tank chassis with open platforms or turrets with four 20mm cannon. Alternatively, a single 37mm AA gun was mounted, too – but all these vehicles were just a compromise and suffered from light armor, a high silhouette and lack of crew protection.
Further developments of more sophisticated anti-aircraft tank designs started in late 1943 and led into different directions. One development line was the ‘Kugelblitz’, another Panzer IV variant, but this time the ball-shaped turret, armed with very effective 30 mm MK 103 cannon, was fully integrated into the hull, resulting in a low silhouette and a protected crew. However, the ‘Kugelblitz’ only featured two of these guns and the tilting turret was very cramped and complicated. Venting and ammunition feed problems led to serious delays and a prolonged development stage.
The ‘Coelian’ family of bigger turrets with various weapon options for the Panzer V (the ‘Panther’) was another direction, especially as a response against the armored Il-2 attack aircraft at the Eastern front and against flying targets at medium altitude. Targets at high altitude, esp. Allied bombers, were to be countered with the very effective 8.8 cm Flak, and there were also several attempts to mount this weapon onto a fully armored hull.
The primary weapon for a new low/medium altitude anti-aircraft tank was to become the heavy automatic 55 mm MK 214. Like the 30 mm MK 103 it was a former aircraft weapon, belt-fed and adapted to continuous ground use. However, in early 1944, teething troubles with the ‘Kugelblitz’ suggested that a completely enclosed turret with one or (even better) two of these new weapons, mounted on a ‘Panther’ or the new E-50/75 tank chassis, would need considerable development time. Operational vehicles were not expected to enter service before mid-1945. In order to fill this operational gap, a more effective solution than the Panzer IV AA conversions, with more range and firepower than anything else currently in service, was direly needed.
This situation led to yet another hasty stopgap solution, the so-called ‘Ostwind II’ weapon system, which consisted primarily of a new turret, mated with a standard medium battle tank chassis. It was developed in a hurry in the course of 1944 and already introduced towards the end of the same year. The ‘Ostwind II’ was a compromise in the worst sense: even though it used two 37 mm FlaK 43 guns in a new twin mount and offered better firepower than any former German AA tank, it also retained many weaknesses from its predecessors: an open turret with only light armor and a high silhouette. But due to the lack of time and resources, the ‘Ostwind II’ was the best thing that could be realized on short notice, and with the perspective of more effective solutions within one year’s time it was rushed into production.
The ‘Ostwind II’ system was an open, roughly diamond-shaped, octagonal turret, very similar in design to the Panzer IV-based ‘Wirbelwind’ and ‘Ostwind’ (which was re-designated ‘Ostwind I’). As a novelty, in order to relieve the crew from work overload, traverse and elevation of the turret was hydraulic, allowing a full elevation (-4° to +90° was possible) in just over four seconds and a full 360° traverse in 15 seconds. This had become necessary because the new turret was bigger and heaver, both the weapons and their crews required more space, so that the Ostwind II complex could not be mounted onto the Panzer IV chassis anymore and movement by hand was just a fallback option.
In order to provide the ‘Ostwind II’ with a sufficiently large chassis, it was based on the SdKfz. 171 Panzer V medium battle tank, the ‘Panther’, exploiting its bigger turret ring, armor level and performance. The Panther chassis had, by late 1944, become available for conversions in considerable numbers through damaged and/or recovered combat tanks, and updated details like new turrets or simplified road wheels were gradually introduced into production and during refurbishments. Mounting the ‘Ostwind II’ turret on the Panzer VI (Tiger) battle tank chassis had been theoretically possible, too, but it never happened, because the Tiger lacked agility and its protection level and fuel consumption were considered impractical for an SPAAG that would typically protect battle tank groups.
The ‘Ostwind II’ turret was built around a motorized mount for the automatic 3.7 cm FlaK 43 twin guns. These proven weapons were very effective against aircraft flying at altitudes up to 4,200 m, but they also had devastating effect against ground targets. The FlaK 43’s armor penetration was considerable when using dedicated ammunition: at 100 m distance it could penetrate 36 mm of a 60°-sloped armor, and at 800 m distance correspondingly 24 mm. The FlaK 43’s theoretical maximum rate of fire was 250 shots/minute, but it was practically kept at ~120 rpm in order to save ammunition and prevent wear of the barrels. The resulting weight of fire was 76.8 kg (169 lb) per minute, but this was only theoretical, too, because the FlaK 43 could only be fed manually by 6-round clips – effectively, only single shots or short bursts could be fired, but a trained crew could maintain fire through using alternating gun use. A more practical belt feed was at the time of the Ostwind II's creation not available yet, even though such a mechanism was already under development for the fully enclosed Coelian turret, which could also take the FlaK 43 twin guns, but the armament was separated from the turret crew.
The new vehicle received the official designation ‘Sd.Kfz. 171/2 Flakpanzer V’, even though ‘Ostwind II’ was more common. When production actually began and how many were built is unclear. The conversion of Panther hulls could have started in late-1944 or early-1945, with sources disagreeing. The exact number of produced vehicles is difficult to determine, either. Beside the prototype, the number of produced vehicles goes from as little as 6 to over 40. The first completed Ostwind II SPAAGs were exclusively delivered to Eastern front units and reached them in spring 1945, where they were immediately thrown into action.
All Flakpanzer vehicles at that time were allocated to special anti-aircraft tank platoons (so-called Panzer Flak Züge). These were used primarily to equip Panzer Divisions, and in some cases given to special units. By the end of March 1945, there were plans to create mixed platoons equipped with the Ostwinds and other Flakpanzers. Depending on the source, they were either to be used in combination with six Kugelblitz, six Ostwinds and four Wirbelwinds or with eight Ostwinds and three Sd.Kfz. 7/1 half-tracks. Due to the war late stage and the low number of anti-aircraft tanks of all types built, this reorganization was never truly implemented, so that most vehicles were simply directly attached to combat units, primarily to the commanding staff.
The Ostwind II armament proved to be very effective, but the open turret (nicknamed ‘Keksdose’ = cookie tin) left the crews vulnerable. The crew conditions esp. during wintertime were abominable, and since aiming had to rely on vision the system's efficacy was limited, esp. against low-flying targets. The situation was slightly improved when the new mobile ‘Medusa’ and ‘Basilisk’ surveillance and target acquisition systems were introduced. These combined radar and powerful visual systems and guided the FlaK crews towards incoming potential targets, what markedly improved the FlaKs' first shot hit probability. However, the radar systems rarely functioned properly, the coordination of multiple SPAAGs in the heat of a low-level air attack was a challenging task, and - to make matters worse - the new mobile radar systems were even more rare than the new SPAAGs themselves.
All Ostwind II tanks were built from recovered ‘Panther’ battle tanks of various versions. The new Panther-based SPAAGs gradually replaced most of the outdated Panzer IV AA variants as well as the Ostwind I. Their production immediately stopped in the course of 1945 when the more sophisticated 'Coelian' family of anti-aircraft tanks with fully enclosed turrets became available. This system was based on Panzer V hulls, too, and it was soon followed by the first E-50 SPAAGs with the new, powerful twin-55 mm gun.
Specifications:
Crew: Six (commander, gunner, 2× loader, driver, radio-operator/hull machine gunner)
Weight: 43.8 tonnes (43.1 long tons; 48.3 short tons)
Length (hull only): 6.87 m (22 ft 6 in)
Width: 3.42 m (11 ft 3 in)
Height: 3.53 m (11 ft 6 3/4 in)
Suspension: Double torsion bar, interleaved road wheels
Fuel capacity: 720 litres (160 imp gal; 190 US gal)
Armor:
15–80 mm (0.6 – 3.15 in)
Performance:
Maximum road speed: 46 km/h (29 mph)
Operational range: 250 km (160 mi)
Power/weight: 15.39 PS (11.5 kW)/tonne (13.77 hp/ton)
Engine:
Maybach HL230 P30 V-12 petrol engine with 700 PS (690 hp, 515 kW)
ZF AK 7-200 gear; 7 forward 1 reverse
Armament:
2× 37 mm (1.46 in) FlaK 43 cannon in twin mount with 1.200 rounds
1× 7.92 mm MG 34 machine gun in the front glacis plate with 2.500 rounds
The kit and its assembly:
This was a spontaneous build, more or less the recycling of leftover parts from a 1:72 Revell Ostwind tank on a Panzer III chassis that I had actually bought primarily for the chassis (it became a fictional Aufklärungspanzer III). When I looked at the leftover turret, I wondered about a beefed-up/bigger version with two 37 mm guns. Such an 'Ostwind II' was actually on the German drawing boards, but never realized - but what-if modelling can certainly change that. However, such a heavy weapon would have to be mounted on a bigger/heavier chassis, so the natural choice became the Panzer V, the Panther medium battle tank. This way, my ‘Ostwind II’ interpretation was born.
The hull for this fictional AA tank is a Hasegawa ‘Panther Ausf. G’ kit, which stems from 1973 and clearly shows its age, at least from today’s point of view. While everything fits well, the details are rather simple, if not crude (e. g. the gratings on the engine deck or the cupola on the turret). However, only the lower hull and the original wheels were used since I wanted to portray a revamped former standard battle tank.
The turret was a more complicated affair. It had to be completely re-constructed, to accept the enlarged twin gun and to fit onto the Panther hull. The first step was the assembly of the twin gun mount, using parts from the original Ostwind kit and additional parts from a second one. In order to save space and not to make thing uber-complicated I added the second weapon to the right side of the original gun and changed some accessories.
This, together with the distance between the barrels, gave the benchmark for the turret's reconstruction. Since the weapon had not become longer, I decided to keep things as simple as possible and just widen the open turret - I simply took the OOB Ostwind hexagonal turret (which consists of an upper and lower half), cut it up vertically and glued them onto the Panther turret's OOB base, shifting the sides just as far to the outside that the twin gun barrels would fit between them - a distance of ~0.4 inch (1 cm). At the rear the gap was simply closed with styrene sheet, while the front used shield parts from the Revell Ostwind kit that come from a ground mount for the FlaK 43. Two parts from this shield were glued together and inserted into the front gap. While this is certainly not as elegant as e. g. the Wirbelwind turret, I think that this solution was easier to integrate.
Massive PSR was necessary to blend the turret walls with the Panther turret base, and as a late modification the opening for the sight had to be moved, too. To the left of the weapons, I also added a raised protective shield for the commander.
Inside of the turret, details from the Ostwind kit(s), e. g. crew seats and ammunition clips, were recycled, too.
Painting and markings:
Since the Ostwind II would be based on a repaired/modified former Panzer V medium battle tank, I settled upon a relatively simple livery. The kit received a uniform finish in Dunkelgelb (RAL 7028), with a network of greenish-grey thin stripes added on top, to break up the tank's outlines and reminiscent of the British ‘Malta’ scheme, but less elaborate. The model and its parts were initially primed with matt sand brown from the rattle can (more reddish than RAL 7028) and then received an overall treatment with thinned RAL 7028 from Modelmaster, for an uneven, dirty and worn look. The stripes were created with thinned Tamiya XF-65 (Field Grey).
Once dry, the whole surface received a dark brown wash, details were emphasized with dry-brushing in light grey and beige. Decals were puzzled together from various German tank sheets, and the kit finally sealed with matt acrylic varnish.
The black vinyl tracks were also painted/weathered, with a wet-in-wet mix of black, grey, iron and red brown (all acrylics). Once mounted into place, mud and dust were simulated around the running gear and the lower hull with a greyish-brown mix of artist mineral pigments.
A bit of recycling and less exotic than one would expect, but it’s still a whiffy tank model that fits well into the historic gap between the realized Panzer IV AA tanks and the unrealized E-50/75 projects. Quite subtle! Creating the enlarged turret was the biggest challenge, even, even more so because it was/is an open structure and the interior can be readily seen. But the new/bigger gun fits well into it, and it even remained movable!
“Kilauea” Woven Wrinkled Dodecahedrally Truncated Deltoidal Hexecontahedron 120 units 2-fold view.
A couple months ago I doodled out a simple design pattern and applied some of the principles of Sphere Theory to come up with a new woven solid. This is not what I came up with, but rather was a nice fallback project when the paper proportions I used turned out to be unfeasible for the original project. The nickname refers to the pentagonal truncated caps, which, being low and flat, vaguely resemble shield volcano craters. The geometric description also requires a bit of imagination to picture, but woven solids are notoriously difficult to describe geometrically. The proportions work quite well here, and the original compound I had in mind still remains to be folded.
Designed by me.
Folded out of copy paper.
◆ Rigged For: Anatomy, Jake, Legacy M&F, Reborn
◆ 14 Silk+8 Leather Strap Textures
◆ 10 Gem Colors
◆ 6 Metal Colors
◆ PBR&Fallback
◆ Fatpack Exclusive Color Set
◆ Copy/Modify/No Transfer
Available Exclusively at the Androgyny Anniversary Round, opening party 10/5 at 5pm SLT!
Landmark: maps.secondlife.com/secondlife/Apple%20Bloom/36/191/833
•───────✧───────•
Tealeaf Treasures has a Discord community! Enjoy WIP streams and early notifications on events, releases, and more! discord.gg/DgaygTR3j7
When we have nothing to shoot Manila Bay always tends to be a fallback position just so I don't go home empty handed. Here are a few shots from yesterday...
+++ DISCLAIMER +++
Nothing you see here is real, even though the conversion or the presented background story might be based historical facts. BEWARE!
Some background:
The Westland Whirlwind was a British heavy fighter developed by Westland Aircraft. It was the Royal Air Force's first single-seat, twin-engine, cannon-armed fighter, and a contemporary of the Supermarine Spitfire and Hawker Hurricane.
A problem for designers in the 1930s was that most agile combat aircraft were generally small. These aircraft had limited fuel storage and only enough flying range for defensive operations, and their armament was relatively light, too. A multi-engine fighter appeared to be the best solution to the problem of range, but a fighter large enough to carry an increased fuel load might be too unwieldy to engage successfully in close combat. Germany and the United States pressed ahead with their design programs, resulting in the Messerschmitt Bf 110 and the Lockheed P-38 Lightning.
The Westland Whirlwind was one of the British answers to more range and firepower, and the first Whirlwind prototype (L6844) flew on 11 October 1938. Construction had been delayed chiefly due to some new features and also to the late delivery of the original Peregrine engines. The Whirlwind was of all-metal construction, with flush riveting, and featuring magnesium skinning on the rear fuselage. The control surface arrangement was conventional, with large one-piece Fowler flaps inboard and an aileron outboard on each wing, with the rear end of the engine nacelles hinging with the flaps; elevators; and a two-piece rudder, split to permit movement above and below the tail plane. Slats had been fitted on the outer wings at the outset as a stall protection measure, but they were soon locked down, having been implicated in an accident.
Service trials were carried out at Martlesham Heath, where the new type exhibited excellent handling and was very easy to fly at all speeds. It was one of the fastest aircraft in service when it flew in the late 1930s, and was much more heavily armed than any other fighter, toting four 20mm cannons.
However, protracted development problems with its Rolls-Royce Peregrine engines delayed the entire project. The combat radius also turned out to be rather short (only 300 miles), and the landing speed was relatively high, which hampered the type's utility. The major role for the Whirlwinds, however, became low-level attack, flying cross-channel "Rhubarb" sweeps against ground targets and "Roadstead" attacks against shipping.
Time went by and worked against the Whirlwind, though: By 1940, the Supermarine Spitfire was mounting 20 mm cannons as well, so the "cannon-armed" requirement was already met by lighter and simpler aircraft. Furthermore, the role of an escort fighter was becoming less important by this time, as RAF Bomber Command turned to night bomber missions.
The main qualities the RAF was looking for now in a twin-engine fighter were range and carrying capacity, e .g. to allow the large radar apparatus of the time to be carried as a night fighter. Concerning these requirements, the bigger Bristol Beaufighter and the fast De Havilland Mosquito could perform just as well as or even better than the Whirlwind.
Anyway, the Whirlwind's potential had not been fully exploited yet, and it was decided to adapt it to new roles and specialized duties, which would exploit its good low altitude handling. Such an opportunity arose when Allied Forces prepared for Operation Torch (initially called Operation Gymnast) in 1942, the British-United States invasion of French North Africa: the somewhat outdated aircraft was retrofitted for a new task as a dedicated tank hunter.
Background was the experience with the Hawker Hurricane Mk. IID, which had become operational at that time. The Mk IIDs were dedicated to ground support, where it was quickly learned that destroying German tanks was difficult; the Hurricanes’ standard 20mm cannons (the same the Whirlwind fighter originally carried) did not have the performance to punch through Gerrnan tanks’ armor, and bombing small tank target successfully was almost impossible.
The solution was to equip aircraft with 2 pounder (40 mm) cannon in a pod under each wing, reducing the other armament to a single Browning in each wing loaded with tracers for aiming purposes.
This equipment was originally tested on a converted Mk IIB in late 1941, and proved to be successful. A new-build Hurricane version of what was known as the Mk IID started in 1942, which, beyond the modified armament, also included additional armor for the pilot, radiator and engine. The aircraft were initially supplied with a pair of Rolls-Royce 'BF' ('Belt-Fed') guns and carried 12 rounds, but this was soon changed to the 40 mm (1.57 in) Vickers S gun with 15 rounds. The weight of the guns and armor protection had a detrimental effect on the aircraft's performance, though, and for the African environment it was feared that the liquid-cooled Merlin engine was too complicated and would hardly cope with the higher ambient temperatures.
A fallback option was needed, and the Whirlwind appeared to be a sound basis – even though the troublesome Peregrine engines were rejected. In a hurry, a Whirlwind Mk. I (P7102) was modified to carry a pair of 40 mm guns, but this time in the lower nose. Compared with the Hurricane’s wing-mounted pods the Whirlwind could carry a slightly bigger load of ammunition (20 RPG). For aiming purposes and against soft targets, a pair of 0.303" (7.7 mm) Browning machine guns with tracer ammunition was mounted above them.
In order to make the aircraft more resilient to the North-African temperatures and against damage, the Whirlwind's touchy Peregrines were replaced by a pair of Bristol Taurus radial engines under relatively narrow cowlings. The engine nacelles had to be widened accordingly, and the Peregrines’ former radiator intakes and installations in the wing roots were removed and simply faired over. Similar to the Hurricane Mk. IID, additional armor plating was added around the cockpit and the engines, raising overall weight.
Flight and weapon tests were conducted in early 1942. While the radial-powered Whirlwind was not as nimble and fast as the original, Peregrine-powered fighter anymore, the aircraft proved to be a stable weapon platform and fully suitable for the ground attack role. Due to its characteristic new nose with the two protruding gun barrels and their separate fairings, the machine was quickly nicknamed “Walrus” and “Buck teeth Whirlwind”.
For operation Torch and as a field test, a total of eleven Whirlwind Mk. Is were converted to Mk. Ic standard. The machines received new serials and were allocated to RAF No. 73 Squadron, which was preparing for deployment to Northern Africa and the Middle East after having been engaged in the Battle of Britain.
The squadron's Whirlwinds and Hurricanes (including some cannon-armed Mk. IIDs, too) were shipped to Takoradi on the Gold Coast onboard HMS Furious, and were then flown in stages across Africa to Egypt.
No. 73 Squadron took part in the series of campaigns in the Western Desert and Tunisia, helping cover the supply routes to Tobruk and taking part in various ground-attack operations.
Both types undertook an anti-tank role in limited numbers during the North African campaign where, provided enemy flak and fighters were absent, they proved accurate and highly effective, not only against armored vehicles but all kinds of motorized transport.
The converted Whirlwinds proved, thanks to their robust engines, to be very reliable and had a better operational status than the Hurricanes. The second engine boosted the pilots' confidence. In direct comparison, the cannon-armed Whirlwind proved to be a better weapon platform than the Hurricane – mainly because the heavy guns were mounted closer to the aircraft’s longitudinal axis. Both aiming and accuracy were better than the Hurricanes’ wing-mounted weapons.
Nevertheless, there were several drawbacks: the Whirlwind’s two engines meant that more service hours had to be spent on them for maintenance, binding ground crew capacities. This was very inconvenient during the highly mobile Northern Africa campaign. Additionally, the Whirlwind's higher fuel consumption and the limited fuel provisions in the Northern African theatre of operations with dispersed and improvised airfields eventually meant that, despite positive results, no further machines were converted. The high landing speed also persisted, so that operations were hazardous.
Eventually the Hurricane Mk IID was adopted for the tank hunter role, with ensuing series production, since it was regarded as the more versatile and also more common type.
The radial-powered Whirlwind Mk. Ic remained operational with No. 73 Squadron until June 1943, when the squadron converted to the Spitfire and moved from Northern Africa to Italy in October. Until then, only six Whirlwinds had remained airworthy.
General characteristics:
Crew: One pilot
Length: 31 ft 7 1/4 in (9,65 m)
Wingspan: 45 ft 0 in (13.72 m)
Height: 11 ft 0 in (3.35 m)
Wing area: 250 ft² (23.2 m²)
Airfoil: NACA 23017-08
Empty weight: 9,400 lb (4,267 kg)
Loaded weight: 12,158 lb (5,520 kg)
Max. take-off weight: 13,120 lb (5,946 kg)
Powerplant:
2× Bristol Taurus II 14-Cylinder sleeve valve radial engines, 1,015 hp (760 kW) each
Performance:
Maximum speed: 400 mph (644 km/h) at 15.000 ft (4.570 m)
Stall speed: 95 mph (83 knots, 153 km/h) with flaps down
Range: 800 mi (696 nmi, 1.288 km)
Service ceiling: 33.500 ft (10.970 m)
Armament:
2x belt-fed two pounder (1.57 in/40 mm) Vickers S cannon, 20 RPG each
2x 0.303 in (7.7 mm) Browning machine guns, 500 RPG (typically armed with tracer rounds)
Option for 2x 250 lbs (115 kg) or 500 lbs (230 kg) bombs under the outer wings
The kit and its assembly
My third whiffed Westland Whirlwind - I must say that this rather obscure aircraft type has some serious potential for mods and fictional uses. The inspiration for this radial-powered variant originally came from a profile drawing of fellow modeler and illustrator FrancLab at flickr.com, who had drawn more than twenty(!) fictional Whirlwinds (check this: www.flickr.com/photos/franclab/16724098644/in/faves-14802...), including one with radial engines and in RAF Tropical Scheme colors.
The kit is, again, the vintage Airfix offering. Modifications center around the engines and the nose section, the rest remained basically OOB.
I already had to learn with my first Whirlwind conversion that mounting bigger engines on this compact aircraft is not easy, and radials, with their bigger diameter and consequentially more voluminous nacelles, would be a challenge from the design perspective.
Figuring out a solution that would be feasible and not make the sleek Whirlwind look like Popeye was not easy. I considered the transplantation of complete engine nacelles from a Matchbox Bristol Beaufighter, but eventually refrained from this idea because everything would be at least one size too big... a mistake I had done before, with very mixed results.
After several trials, I settled on a compromise, because I could not find a satisfactory 'British' solution, at least in my spares vault: the implantation of "foreign" material in the form of cowlings and nacelles from an Airfix Mitsubishi Ki-46.
The transplantation started with the removal of the original Peregrine engine nacelles from the lower wing section and gluing these to the upper half, which remained intact. Then the Ki-46’s lower nacelle half, cut away from the model’s wing in a similar fashion, was grafted onto the Whirlwind’s lower wing, ensuring that the landing gear attachment points would match with the new openings. This stunt worked very well!
As a final step, the upper Ki-46 engine nacelle half was placed on top of the Whirlwind wings’ upper side, and the radial engines were used as a ruler for the overall fit. In the end, the modified nacelles sit perfectly in place, and the original distance between the propellers as well as the landing gear’s track width could be maintained, so that the change is rather subtle.
Propellers and spinners were taken from the Airfix Whirlwind, and in order to mount them into the deep and "hollow" Ki-46 cowlings I inserted a styrene tube as a simple adapter, which would also hold the added metal axis' behind the propellers. The parts fit snuggly together.
Details like the exhaust pipes and the carburetor intakes were scratched from sprue material. The landing gear is OOB, but I had to re-create the covers from sheet material since I could only find a single pair of doors from the Ki-46 kit. On the other side, this had the benefit that the material is much thinner.
The original radiator intake slits were closed with putty and blended into the wing’s leading edge.The respective outlets on the trailing edge were sanded away.
For the guns in the nose I added two long, shallow fairings (actually drop tank halves from an Airfix G.91) and re-located the original oils cooler and gun camera fairings under the wing roots.
The original gun mounts were covered with putty, and new openings for the modified armament drilled into the re-sculpted nose section. The 2-pounders' and machine gun barrels are hollow steel needles of different diameters.
Painting and markings:
Staying somewhat true to FrancLab's profile and the North Africa theatre of operations, the paint scheme was more or less pre-defined. The Tropical scheme is a rather unusual look on this sleek aircraft, but works very well!
The standard RAF camouflage pattern for the Whirlwind was retained, but the European colors replaced with Dark Earth (Humbrol 29) and Middle Stone (ModelMaster 2052, the best representation of the tone I could find so far). The undersides were painted with ModelMaster 2055 (US Navy Blue Grey) as an alternative to RAF Azure and Mediterranean Blue.
Interior surfaces were painted with Cockpit Green (Humbrol 78) and slightly dry-brushed with light grey.
The red spinners are typical Desert Force markings, and I added yellow ID markings to the outer wings’ leading edges (created from generic decal sheet). Not certain how authentic this is for Northern Africa, since the Hurricanes did not carry these markings – but the Spitfires did, as well as the few leftover Whirlwinds over Continental Europe? At least, it’s a colorful detail.
Even though many Hurricanes of 73 Squadron in Northern Africa carried the squadron’s colorful pre-war marking on the flanks instead of a two-letter code, I eventually rejected this option. IMHO it might have been simply too much for this whiffy aircraft?
Roundels and markings were puzzled together from the scrap box, the code letters are single digits from Xtradecal aftermarket sheets. I mixed medium sea grey and dull red letters – a practice frequently seen on Northern Africa aircraft (which also frequently did not carry squadron codes at all) in order to improve readability. The serial was puzzled together, too, using a free serial slot according to ukserials.com.
As another individual touch I added a small nose art motif under the cockpit: a Bugs Bunny cartoon toting a shotgun (actually from a P-51 from the late war Pacific TO), as an interpretation of the “Buck teeth” nickname for the aircraft.
Finally, the model was weathered, esp. on the upper surfaces in order to mimic sun bleaching, and some soot stains were added around the guns and the exhaust outlets. The cooling flaps were emphasized through a treatment with Tamiya “Smoke”, which is perfect for oil stains. Finally, the kit was sealed with matt acrylic varnish and finishing touches like the wire antenna and position lights applied.
Another subtle whif, the desert paint scheme is probably distracting enough that, at a casual glance, the radials and the modified nose are not obvious at all. Actually, the Japanese engines look pretty British after some cosmetics, and they are small enough to keep overall proportions in reasonable limits – the sleek Whirlwind quickly turns head-heavy and unbalanced with bigger engines grafted to the airframe! Actually, the converted aircraft looks now, when looked at it head-on, almost like a baby Beaufighter!
· ▸ Emilia Nails single purchase is available in:
ㅤㅤ• 6 color Packs
· ▸ Each Pack includes:
ㅤㅤ• PBR version
ㅤㅤ• Fallback version
ㅤㅤ• 8 Metal color options
ㅤㅤ• 3 Polish color options
ㅤㅤ• 3 Leather color options
ㅤㅤ• Left/Right · On/Off
· ▸ Fatpack is available and comes with:
ㅤㅤ• 4 Holo Polishes
ㅤㅤ• Tint option
· ▸ Emilia Nails is fitted for:
ㅤㅤ• Maitreya Lara X
ㅤㅤ• Meshbody Legacy
ㅤㅤ• Belleza Gen X
ㅤㅤ• eBody Reborn
· ▸ Copy
· ▸ Modify
· ▸ No Transfer
ㅤㅤｓｈｏｐ ｔｈｉｓ ａｔ ｅｑｕａｌ１０ 苛 尉 ズ ょ ド
ㅤㅤ
▸ Ｊｏｉｎ ｕｓ ｏｎ Ｐｒｉｍｆｅｅｄ
ㅤㅤ
▸ Ｊｏｉｎ ｕｓ ｏｎ Ｆａｃｅｂｏｏｋ
ㅤㅤ
▸ Ｊｏｉｎ ｕｓ ｏｎ Ｉｎｓｔａｇｒａｍ
ㅤㅤ
▸ Ｊｏｉｎ ｕｓ ｏｎ Ｙｏｕｔｕｂｅ
ㅤㅤ
▸ Main Sim
ㅤㅤ
ㅤㅤ