1957 Chevy - Van

Body Work/Fabrication: Shaved Body Lines, Replaced All Flat Sheet Metal, Reshaped Front And Rear Wheel Wells,Front And Rear Roll Pan,, One Off Billet Snow Flake Grille, Tribar Halogen Headlights, Billet Specialities Tail Lights And Front Turn Signals,1932 Ford Door Handles,Custom Service Doors For Snow Cone Vending

Engine/Transmission: 400 Horse GM Crate Engine, 700R4, 3000 Stall Converter

Suspension/Chassis: Stock Solid Axle Front Suspension Replaced With R&B Obsolete Front Chassis Clip That Accepts S-10 Front Suspension Components. BYC 1 1/4 Narrowed Tubular Control Arms, Drop Spindles, 2600 LB Bags With Custom Cups. Rear Suspension AirRide Technologies 4 Link On An S-10 Axle with 9000 series bags, One Off Front Wheel Tubs, Engine Cover And Floor, Rear Tubs Raised 9 Inches With Step Notch.

Paint: White With White And Blue Flames, Stenciled Pearl Snow Flakes

Interior: Two Tone Leather Bucket Seats *Completed By Southtowne Upolstery*, Custom Smoothed Dash With 1932 Ford Oval Dakota Digital Guage Cluster, Billet Specialities Leather Wrap Steering Wheel On Top Of An IDIDIT Tilt Column,Gennie Floor Shifter, rear Of Vehicle Equipped For Snow Cone Vending.

Wheels & Tires: Billet Specialities 2005 3D Series Rail, 22x10's All Around.

To book the Snow Sled for your next event contact Saint Louis Snow Cone at (314)-968-8377

Find and like Saint Louis Snow Cone on Facebook at www.facebook.com/STLSnowCone?ref=hl

For all of your custom and restoration needs give us a call or click at (314)-968-8377 or www.cleancutcreations.com

Find and like us on Facebook at www.facebook.com/CCCSTL

This 2012 Ford Flex came to us needing rear suicide doors to make it handicap accessible. We completely disassembled the interior to begin the work. New hinge pockets were made in the door jamb and door. The door and quarter were also reinforced to handle the new hinge point. The door handles and latches were swapped side for side and moved to the front of the doors. We did this for two reasons, the first being functionality and the second aesthetics . With the door handles moved to the fornt of the doors, you get the classic look assoicated with the factory style rear suicide doors. Alot of effort also went into making the drivers side rear door power open and close. This door operates with a seperate key fob and can also be operated with a button on the dash and has an emergency release cable installed. This project turned out to be exactly what the customer wanted while keeping a factory built look.

For all of your custom and restoration needs contact us at (314) 968-8377 or www.cleancutcreations.com

Like us on face book at www.facebook.com/CCCSTL

For more pics see the full set at www.flickr.com/photos/cccstl/sets/72157632854930327/

This 2012 Ford Flex came to us needing rear suicide doors to make it handicap accessible. We completely disassembled the interior to begin the work. New hinge pockets were made in the door jamb and door. The door and quarter were also reinforced to handle the new hinge point. The door handles and latches were swapped side for side and moved to the front of the doors. We did this for two reasons, the first being functionality and the second aesthetics . With the door handles moved to the fornt of the doors, you get the classic look assoicated with the factory style rear suicide doors. Alot of effort also went into making the drivers side rear door power open and close. This door operates with a seperate key fob and can also be operated with a button on the dash and has an emergency release cable installed. This project turned out to be exactly what the customer wanted while keeping a factory built look.

For all of your custom and restoration needs contact us at (314) 968-8377 or www.cleancutcreations.com

Like us on face book at www.facebook.com/CCCSTL

For more pics see the full set at www.flickr.com/photos/cccstl/sets/72157632854930327/

1957 Chevy - Van

Body Work/Fabrication: Shaved Body Lines, Replaced All Flat Sheet Metal, Reshaped Front And Rear Wheel Wells,Front And Rear Roll Pan,, One Off Billet Snow Flake Grille, Tribar Halogen Headlights, Billet Specialities Tail Lights And Front Turn Signals,1932 Ford Door Handles,Custom Service Doors For Snow Cone Vending

Engine/Transmission: 400 Horse GM Crate Engine, 700R4, 3000 Stall Converter

Suspension/Chassis: Stock Solid Axle Front Suspension Replaced With R&B Obsolete Front Chassis Clip That Accepts S-10 Front Suspension Components. BYC 1 1/4 Narrowed Tubular Control Arms, Drop Spindles, 2600 LB Bags With Custom Cups. Rear Suspension AirRide Technologies 4 Link On An S-10 Axle with 9000 series bags, One Off Front Wheel Tubs, Engine Cover And Floor, Rear Tubs Raised 9 Inches With Step Notch.

Paint: White With White And Blue Flames, Stenciled Pearl Snow Flakes

Interior: Two Tone Leather Bucket Seats *Completed By Southtowne Upolstery*, Custom Smoothed Dash With 1932 Ford Oval Dakota Digital Guage Cluster, Billet Specialities Leather Wrap Steering Wheel On Top Of An IDIDIT Tilt Column,Gennie Floor Shifter, rear Of Vehicle Equipped For Snow Cone Vending.

Wheels & Tires: Billet Specialities 2005 3D Series Rail, 22x10's All Around.

To book the Snow Sled for your next event contact Saint Louis Snow Cone at (314)-968-8377

Find and like Saint Louis Snow Cone on Facebook at www.facebook.com/STLSnowCone?ref=hl

For all of your custom and restoration needs give us a call or click at (314)-968-8377 or www.cleancutcreations.com

Find and like us on Facebook at www.facebook.com/CCCSTL

This 2012 Ford Flex came to us needing rear suicide doors to make it handicap accessible. We completely disassembled the interior to begin the work. New hinge pockets were made in the door jamb and door. The door and quarter were also reinforced to handle the new hinge point. The door handles and latches were swapped side for side and moved to the front of the doors. We did this for two reasons, the first being functionality and the second aesthetics . With the door handles moved to the fornt of the doors, you get the classic look assoicated with the factory style rear suicide doors. Alot of effort also went into making the drivers side rear door power open and close. This door operates with a seperate key fob and can also be operated with a button on the dash and has an emergency release cable installed. This project turned out to be exactly what the customer wanted while keeping a factory built look.

For all of your custom and restoration needs contact us at (314) 968-8377 or www.cleancutcreations.com

Like us on face book at www.facebook.com/CCCSTL

For more pics see the full set at www.flickr.com/photos/cccstl/sets/72157632854930327/

This 2012 Ford Flex came to us needing rear suicide doors to make it handicap accessible. We completely disassembled the interior to begin the work. New hinge pockets were made in the door jamb and door. The door and quarter were also reinforced to handle the new hinge point. The door handles and latches were swapped side for side and moved to the front of the doors. We did this for two reasons, the first being functionality and the second aesthetics . With the door handles moved to the fornt of the doors, you get the classic look assoicated with the factory style rear suicide doors. Alot of effort also went into making the drivers side rear door power open and close. This door operates with a seperate key fob and can also be operated with a button on the dash and has an emergency release cable installed. This project turned out to be exactly what the customer wanted while keeping a factory built look.

For all of your custom and restoration needs contact us at (314) 968-8377 or www.cleancutcreations.com

Like us on face book at www.facebook.com/CCCSTL

For more pics see the full set at www.flickr.com/photos/cccstl/sets/72157632854930327/

This 2012 Ford Flex came to us needing rear suicide doors to make it handicap accessible. We completely disassembled the interior to begin the work. New hinge pockets were made in the door jamb and door. The door and quarter were also reinforced to handle the new hinge point. The door handles and latches were swapped side for side and moved to the front of the doors. We did this for two reasons, the first being functionality and the second aesthetics . With the door handles moved to the fornt of the doors, you get the classic look assoicated with the factory style rear suicide doors. Alot of effort also went into making the drivers side rear door power open and close. This door operates with a seperate key fob and can also be operated with a button on the dash and has an emergency release cable installed. This project turned out to be exactly what the customer wanted while keeping a factory built look.

For all of your custom and restoration needs contact us at (314) 968-8377 or www.cleancutcreations.com

Like us on face book at www.facebook.com/CCCSTL

For more pics see the full set at www.flickr.com/photos/cccstl/sets/72157632854930327/

This 2012 Ford Flex came to us needing rear suicide doors to make it handicap accessible. We completely disassembled the interior to begin the work. New hinge pockets were made in the door jamb and door. The door and quarter were also reinforced to handle the new hinge point. The door handles and latches were swapped side for side and moved to the front of the doors. We did this for two reasons, the first being functionality and the second aesthetics . With the door handles moved to the fornt of the doors, you get the classic look assoicated with the factory style rear suicide doors. Alot of effort also went into making the drivers side rear door power open and close. This door operates with a seperate key fob and can also be operated with a button on the dash and has an emergency release cable installed. This project turned out to be exactly what the customer wanted while keeping a factory built look.

For all of your custom and restoration needs contact us at (314) 968-8377 or www.cleancutcreations.com

Like us on face book at www.facebook.com/CCCSTL

For more pics see the full set at www.flickr.com/photos/cccstl/sets/72157632854930327/

This 2012 Ford Flex came to us needing rear suicide doors to make it handicap accessible. We completely disassembled the interior to begin the work. New hinge pockets were made in the door jamb and door. The door and quarter were also reinforced to handle the new hinge point. The door handles and latches were swapped side for side and moved to the front of the doors. We did this for two reasons, the first being functionality and the second aesthetics . With the door handles moved to the fornt of the doors, you get the classic look assoicated with the factory style rear suicide doors. Alot of effort also went into making the drivers side rear door power open and close. This door operates with a seperate key fob and can also be operated with a button on the dash and has an emergency release cable installed. This project turned out to be exactly what the customer wanted while keeping a factory built look.

For all of your custom and restoration needs contact us at (314) 968-8377 or www.cleancutcreations.com

Like us on face book at www.facebook.com/CCCSTL

For more pics see the full set at www.flickr.com/photos/cccstl/sets/72157632854930327/

This 1965 Pontaic Parisienne came in for a full restoration with some custom touches. The car was stripped down to bare metal we replaced the quarters, inner quarters & wheel houses, rockers were repaired floors, trunk floors and all bracing were replaced or repaired. The window set channel was repaired there was extensive rust repair done to the fenders and most panels on the car. A new convertible top was installed. The wheels were replaced with 20" & 22" Coy's 5 spoke wheel. A Custom 2 tone paint scheme was chosen with a custom Route 66 embalm with the color break mimicking the road stripe. A custom interior was installed by Styl'n Stiches. The brakes were upgraded to a dual circuit, with 14" disc brakes in front. A Ride Tech suspension system was installed. This project turned out awesome! The owner takes in on a annual trip down Route 66.

For all of your custom and restoration needs give us a call or click at www.cleancutcreations.com

or 314-968-8377

Like us on Face Book at www.facebook.com/CCCSTL

Follow the owners adventures at route66pontiac.com/

& www.facebook.com/Route66Pontiac?fref=ts

This 1965 Pontaic Parisienne came in for a full restoration with some custom touches. The car was stripped down to bare metal we replaced the quarters, inner quarters & wheel houses, rockers were repaired floors, trunk floors and all bracing were replaced or repaired. The window set channel was repaired there was extensive rust repair done to the fenders and most panels on the car. A new convertible top was installed. The wheels were replaced with 20" & 22" Coy's 5 spoke wheel. A Custom 2 tone paint scheme was chosen with a custom Route 66 embalm with the color break mimicking the road stripe. A custom interior was installed by Styl'n Stiches. The brakes were upgraded to a dual circuit, with 14" disc brakes in front. A Ride Tech suspension system was installed. This project turned out awesome! The owner takes in on a annual trip down Route 66.

For all of your custom and restoration needs give us a call or click at www.cleancutcreations.com

or 314-968-8377

Like us on Face Book at www.facebook.com/CCCSTL

Follow the owners adventures at route66pontiac.com/

& www.facebook.com/Route66Pontiac?fref=ts

This 2012 Ford Flex came to us needing rear suicide doors to make it handicap accessible. We completely disassembled the interior to begin the work. New hinge pockets were made in the door jamb and door. The door and quarter were also reinforced to handle the new hinge point. The door handles and latches were swapped side for side and moved to the front of the doors. We did this for two reasons, the first being functionality and the second aesthetics . With the door handles moved to the fornt of the doors, you get the classic look assoicated with the factory style rear suicide doors. Alot of effort also went into making the drivers side rear door power open and close. This door operates with a seperate key fob and can also be operated with a button on the dash and has an emergency release cable installed. This project turned out to be exactly what the customer wanted while keeping a factory built look.

For all of your custom and restoration needs contact us at (314) 968-8377 or www.cleancutcreations.com

Like us on face book at www.facebook.com/CCCSTL

For more pics see the full set at www.flickr.com/photos/cccstl/sets/72157632854930327/

This 2012 Ford Flex came to us needing rear suicide doors to make it handicap accessible. We completely disassembled the interior to begin the work. New hinge pockets were made in the door jamb and door. The door and quarter were also reinforced to handle the new hinge point. The door handles and latches were swapped side for side and moved to the front of the doors. We did this for two reasons, the first being functionality and the second aesthetics . With the door handles moved to the fornt of the doors, you get the classic look assoicated with the factory style rear suicide doors. Alot of effort also went into making the drivers side rear door power open and close. This door operates with a seperate key fob and can also be operated with a button on the dash and has an emergency release cable installed. This project turned out to be exactly what the customer wanted while keeping a factory built look.

For all of your custom and restoration needs contact us at (314) 968-8377 or www.cleancutcreations.com

Like us on face book at www.facebook.com/CCCSTL

For more pics see the full set at www.flickr.com/photos/cccstl/sets/72157632854930327/

This 1965 Pontaic Parisienne came in for a full restoration with some custom touches. The car was stripped down to bare metal we replaced the quarters, inner quarters & wheel houses, rockers were repaired floors, trunk floors and all bracing were replaced or repaired. The window set channel was repaired there was extensive rust repair done to the fenders and most panels on the car. A new convertible top was installed. The wheels were replaced with 20" & 22" Coy's 5 spoke wheel. A Custom 2 tone paint scheme was chosen with a custom Route 66 embalm with the color break mimicking the road stripe. A custom interior was installed by Styl'n Stiches. The brakes were upgraded to a dual circuit, with 14" disc brakes in front. A Ride Tech suspension system was installed. This project turned out awesome! The owner takes in on a annual trip down Route 66.

For all of your custom and restoration needs give us a call or click at www.cleancutcreations.com

or 314-968-8377

Like us on Face Book at www.facebook.com/CCCSTL

Follow the owners adventures at route66pontiac.com/

& www.facebook.com/Route66Pontiac?fref=ts

This 1969 Camaro was brought to us for a color change and some minor repairs. The body was straightened a new hood was installed and both the quarters were repaired to allow for better fitment of the doors. The owner oddly enough choose a ford color for the cars new look, the color was Ford Code GT Warm Grey Metallic . The stripe color was changed to gloss black.

For all of your custom and restoration needs give us a call or click at (314) 968-8377 or www.cleancutcreations.com

Find us on facebook at www.facebook.com/CCCSTL

This 2012 Ford Flex came to us needing rear suicide doors to make it handicap accessible. We completely disassembled the interior to begin the work. New hinge pockets were made in the door jamb and door. The door and quarter were also reinforced to handle the new hinge point. The door handles and latches were swapped side for side and moved to the front of the doors. We did this for two reasons, the first being functionality and the second aesthetics . With the door handles moved to the fornt of the doors, you get the classic look assoicated with the factory style rear suicide doors. Alot of effort also went into making the drivers side rear door power open and close. This door operates with a seperate key fob and can also be operated with a button on the dash and has an emergency release cable installed. This project turned out to be exactly what the customer wanted while keeping a factory built look.

For all of your custom and restoration needs contact us at (314) 968-8377 or www.cleancutcreations.com

Like us on face book at www.facebook.com/CCCSTL

For more pics see the full set at www.flickr.com/photos/cccstl/sets/72157632854930327/

This 1965 Pontaic Parisienne came in for a full restoration with some custom touches. The car was stripped down to bare metal we replaced the quarters, inner quarters & wheel houses, rockers were repaired floors, trunk floors and all bracing were replaced or repaired. The window set channel was repaired there was extensive rust repair done to the fenders and most panels on the car. A new convertible top was installed. The wheels were replaced with 20" & 22" Coy's 5 spoke wheel. A Custom 2 tone paint scheme was chosen with a custom Route 66 embalm with the color break mimicking the road stripe. A custom interior was installed by Styl'n Stiches. The brakes were upgraded to a dual circuit, with 14" disc brakes in front. A Ride Tech suspension system was installed. This project turned out awesome! The owner takes in on a annual trip down Route 66.

For all of your custom and restoration needs give us a call or click at www.cleancutcreations.com

or 314-968-8377

Like us on Face Book at www.facebook.com/CCCSTL

Follow the owners adventures at route66pontiac.com/

& www.facebook.com/Route66Pontiac?fref=ts

This 1965 Pontaic Parisienne came in for a full restoration with some custom touches. The car was stripped down to bare metal we replaced the quarters, inner quarters & wheel houses, rockers were repaired floors, trunk floors and all bracing were replaced or repaired. The window set channel was repaired there was extensive rust repair done to the fenders and most panels on the car. A new convertible top was installed. The wheels were replaced with 20" & 22" Coy's 5 spoke wheel. A Custom 2 tone paint scheme was chosen with a custom Route 66 embalm with the color break mimicking the road stripe. A custom interior was installed by Styl'n Stiches. The brakes were upgraded to a dual circuit, with 14" disc brakes in front. A Ride Tech suspension system was installed. This project turned out awesome! The owner takes in on a annual trip down Route 66.

For all of your custom and restoration needs give us a call or click at www.cleancutcreations.com

or 314-968-8377

Like us on Face Book at www.facebook.com/CCCSTL

Follow the owners adventures at route66pontiac.com/

& www.facebook.com/Route66Pontiac?fref=ts

This 1965 Pontaic Parisienne came in for a full restoration with some custom touches. The car was stripped down to bare metal we replaced the quarters, inner quarters & wheel houses, rockers were repaired floors, trunk floors and all bracing were replaced or repaired. The window set channel was repaired there was extensive rust repair done to the fenders and most panels on the car. A new convertible top was installed. The wheels were replaced with 20" & 22" Coy's 5 spoke wheel. A Custom 2 tone paint scheme was chosen with a custom Route 66 embalm with the color break mimicking the road stripe. A custom interior was installed by Styl'n Stiches. The brakes were upgraded to a dual circuit, with 14" disc brakes in front. A Ride Tech suspension system was installed. This project turned out awesome! The owner takes in on a annual trip down Route 66.

For all of your custom and restoration needs give us a call or click at www.cleancutcreations.com

or 314-968-8377

Like us on Face Book at www.facebook.com/CCCSTL

Follow the owners adventures at route66pontiac.com/

& www.facebook.com/Route66Pontiac?fref=ts

1957 Chevy - Van

Body Work/Fabrication: Shaved Body Lines, Replaced All Flat Sheet Metal, Reshaped Front And Rear Wheel Wells,Front And Rear Roll Pan,, One Off Billet Snow Flake Grille, Tribar Halogen Headlights, Billet Specialities Tail Lights And Front Turn Signals,1932 Ford Door Handles,Custom Service Doors For Snow Cone Vending

Engine/Transmission: 400 Horse GM Crate Engine, 700R4, 3000 Stall Converter

Suspension/Chassis: Stock Solid Axle Front Suspension Replaced With R&B Obsolete Front Chassis Clip That Accepts S-10 Front Suspension Components. BYC 1 1/4 Narrowed Tubular Control Arms, Drop Spindles, 2600 LB Bags With Custom Cups. Rear Suspension AirRide Technologies 4 Link On An S-10 Axle with 9000 series bags, One Off Front Wheel Tubs, Engine Cover And Floor, Rear Tubs Raised 9 Inches With Step Notch.

Paint: White With White And Blue Flames, Stenciled Pearl Snow Flakes

Interior: Two Tone Leather Bucket Seats *Completed By Southtowne Upolstery*, Custom Smoothed Dash With 1932 Ford Oval Dakota Digital Guage Cluster, Billet Specialities Leather Wrap Steering Wheel On Top Of An IDIDIT Tilt Column,Gennie Floor Shifter, rear Of Vehicle Equipped For Snow Cone Vending.

Wheels & Tires: Billet Specialities 2005 3D Series Rail, 22x10's All Around.

To book the Snow Sled for your next event contact Saint Louis Snow Cone at (314)-968-8377

Find and like Saint Louis Snow Cone on Facebook at www.facebook.com/STLSnowCone?ref=hl

For all of your custom and restoration needs give us a call or click at (314)-968-8377 or www.cleancutcreations.com

Find and like us on Facebook at www.facebook.com/CCCSTL

via Instagram ift.tt/1Weg9RQ

This 1965 Pontaic Parisienne came in for a full restoration with some custom touches. The car was stripped down to bare metal we replaced the quarters, inner quarters & wheel houses, rockers were repaired floors, trunk floors and all bracing were replaced or repaired. The window set channel was repaired there was extensive rust repair done to the fenders and most panels on the car. A new convertible top was installed. The wheels were replaced with 20" & 22" Coy's 5 spoke wheel. A Custom 2 tone paint scheme was chosen with a custom Route 66 embalm with the color break mimicking the road stripe. A custom interior was installed by Styl'n Stiches. The brakes were upgraded to a dual circuit, with 14" disc brakes in front. A Ride Tech suspension system was installed. This project turned out awesome! The owner takes in on a annual trip down Route 66.

For all of your custom and restoration needs give us a call or click at www.cleancutcreations.com

or 314-968-8377

Like us on Face Book at www.facebook.com/CCCSTL

Follow the owners adventures at route66pontiac.com/

& www.facebook.com/Route66Pontiac?fref=ts

1957 Chevy - Van

Body Work/Fabrication: Shaved Body Lines, Replaced All Flat Sheet Metal, Reshaped Front And Rear Wheel Wells,Front And Rear Roll Pan,, One Off Billet Snow Flake Grille, Tribar Halogen Headlights, Billet Specialities Tail Lights And Front Turn Signals,1932 Ford Door Handles,Custom Service Doors For Snow Cone Vending

Engine/Transmission: 400 Horse GM Crate Engine, 700R4, 3000 Stall Converter

Suspension/Chassis: Stock Solid Axle Front Suspension Replaced With R&B Obsolete Front Chassis Clip That Accepts S-10 Front Suspension Components. BYC 1 1/4 Narrowed Tubular Control Arms, Drop Spindles, 2600 LB Bags With Custom Cups. Rear Suspension AirRide Technologies 4 Link On An S-10 Axle with 9000 series bags, One Off Front Wheel Tubs, Engine Cover And Floor, Rear Tubs Raised 9 Inches With Step Notch.

Paint: White With White And Blue Flames, Stenciled Pearl Snow Flakes

Interior: Two Tone Leather Bucket Seats *Completed By Southtowne Upolstery*, Custom Smoothed Dash With 1932 Ford Oval Dakota Digital Guage Cluster, Billet Specialities Leather Wrap Steering Wheel On Top Of An IDIDIT Tilt Column,Gennie Floor Shifter, rear Of Vehicle Equipped For Snow Cone Vending.

Wheels & Tires: Billet Specialities 2005 3D Series Rail, 22x10's All Around.

To book the Snow Sled for your next event contact Saint Louis Snow Cone at (314)-968-8377

Find and like Saint Louis Snow Cone on Facebook at www.facebook.com/STLSnowCone?ref=hl

For all of your custom and restoration needs give us a call or click at (314)-968-8377 or www.cleancutcreations.com

Find and like us on Facebook at www.facebook.com/CCCSTL

This new 2013 Challenger was brought in for some custom stripes, retro script embalms & custom painted brake calipers to match the stripes. The owner picked out Dodge Viper Snake Skin Green for the stripe color & brake calipers. This one is sure to grab a lot of attention.

For all or your custom or restoration needs give us a call or click at 314-968-8377 or www.cleancutcreations.com

Like us on Face Book at www.facebook.com/CCCSTL

This 2012 Ford Flex came to us needing rear suicide doors to make it handicap accessible. We completely disassembled the interior to begin the work. New hinge pockets were made in the door jamb and door. The door and quarter were also reinforced to handle the new hinge point. The door handles and latches were swapped side for side and moved to the front of the doors. We did this for two reasons, the first being functionality and the second aesthetics . With the door handles moved to the fornt of the doors, you get the classic look assoicated with the factory style rear suicide doors. Alot of effort also went into making the drivers side rear door power open and close. This door operates with a seperate key fob and can also be operated with a button on the dash and has an emergency release cable installed. This project turned out to be exactly what the customer wanted while keeping a factory built look.

For all of your custom and restoration needs contact us at (314) 968-8377 or www.cleancutcreations.com

Like us on face book at www.facebook.com/CCCSTL

For more pics see the full set at www.flickr.com/photos/cccstl/sets/72157632854930327/

This '69 Camaro RS Convertible came in for body work, paint and interior installation. We straightened most of the panels on the car, adjusted the doors for better fitment. adjusted the grille and repaired the RS hideaway headlights. Completely refinished the outside of the car & added a SS D90 Stripe (Hockey Stick) stripes to the sides. In the interior we recovered both front seats and the back seat with the Deluxe Hounds tooth option.

For all of your custom and restoration needs give us a call or click at 3214-968-8377 or www.cleancutcreations.com

like us on Facebook at www.facebook.com/CCCSTL

This 2012 Ford Flex came to us needing rear suicide doors to make it handicap accessible. We completely disassembled the interior to begin the work. New hinge pockets were made in the door jamb and door. The door and quarter were also reinforced to handle the new hinge point. The door handles and latches were swapped side for side and moved to the front of the doors. We did this for two reasons, the first being functionality and the second aesthetics . With the door handles moved to the fornt of the doors, you get the classic look assoicated with the factory style rear suicide doors. Alot of effort also went into making the drivers side rear door power open and close. This door operates with a seperate key fob and can also be operated with a button on the dash and has an emergency release cable installed. This project turned out to be exactly what the customer wanted while keeping a factory built look.

For all of your custom and restoration needs contact us at (314) 968-8377 or www.cleancutcreations.com

Like us on face book at www.facebook.com/CCCSTL

For more pics see the full set at www.flickr.com/photos/cccstl/sets/72157632854930327/

This 1965 Pontaic Parisienne came in for a full restoration with some custom touches. The car was stripped down to bare metal we replaced the quarters, inner quarters & wheel houses, rockers were repaired floors, trunk floors and all bracing were replaced or repaired. The window set channel was repaired there was extensive rust repair done to the fenders and most panels on the car. A new convertible top was installed. The wheels were replaced with 20" & 22" Coy's 5 spoke wheel. A Custom 2 tone paint scheme was chosen with a custom Route 66 embalm with the color break mimicking the road stripe. A custom interior was installed by Styl'n Stiches. The brakes were upgraded to a dual circuit, with 14" disc brakes in front. A Ride Tech suspension system was installed. This project turned out awesome! The owner takes in on a annual trip down Route 66.

For all of your custom and restoration needs give us a call or click at www.cleancutcreations.com

or 314-968-8377

Like us on Face Book at www.facebook.com/CCCSTL

Follow the owners adventures at route66pontiac.com/

& www.facebook.com/Route66Pontiac?fref=ts

We built this 2004 Chevy Colorado back in 2004, it was the first of its kind to be customized. This truck features a full custom chassis build, custom paint, full custom interior, Magna Flow Exhaust system, custom grille and full Ride Tech Suspension. This Colorado has been on the cover of three magazines and has gotten a lot of attention over the years.

For all of your custom and restoration needs give us a call or click at 314-968-8377 or www.cleancutcreations.com

like us on Face Book at www.facebook.com/CCCSTL

This 2012 Ford Flex came to us needing rear suicide doors to make it handicap accessible. We completely disassembled the interior to begin the work. New hinge pockets were made in the door jamb and door. The door and quarter were also reinforced to handle the new hinge point. The door handles and latches were swapped side for side and moved to the front of the doors. We did this for two reasons, the first being functionality and the second aesthetics . With the door handles moved to the fornt of the doors, you get the classic look assoicated with the factory style rear suicide doors. Alot of effort also went into making the drivers side rear door power open and close. This door operates with a seperate key fob and can also be operated with a button on the dash and has an emergency release cable installed. This project turned out to be exactly what the customer wanted while keeping a factory built look.

For all of your custom and restoration needs contact us at (314) 968-8377 or www.cleancutcreations.com

Like us on face book at www.facebook.com/CCCSTL

For more pics see the full set at www.flickr.com/photos/cccstl/sets/72157632854930327/

This 1965 Pontaic Parisienne came in for a full restoration with some custom touches. The car was stripped down to bare metal we replaced the quarters, inner quarters & wheel houses, rockers were repaired floors, trunk floors and all bracing were replaced or repaired. The window set channel was repaired there was extensive rust repair done to the fenders and most panels on the car. A new convertible top was installed. The wheels were replaced with 20" & 22" Coy's 5 spoke wheel. A Custom 2 tone paint scheme was chosen with a custom Route 66 embalm with the color break mimicking the road stripe. A custom interior was installed by Styl'n Stiches. The brakes were upgraded to a dual circuit, with 14" disc brakes in front. A Ride Tech suspension system was installed. This project turned out awesome! The owner takes in on a annual trip down Route 66.

For all of your custom and restoration needs give us a call or click at www.cleancutcreations.com

or 314-968-8377

Like us on Face Book at www.facebook.com/CCCSTL

Follow the owners adventures at route66pontiac.com/

& www.facebook.com/Route66Pontiac?fref=ts

This 2012 Ford Flex came to us needing rear suicide doors to make it handicap accessible. We completely disassembled the interior to begin the work. New hinge pockets were made in the door jamb and door. The door and quarter were also reinforced to handle the new hinge point. The door handles and latches were swapped side for side and moved to the front of the doors. We did this for two reasons, the first being functionality and the second aesthetics . With the door handles moved to the fornt of the doors, you get the classic look assoicated with the factory style rear suicide doors. Alot of effort also went into making the drivers side rear door power open and close. This door operates with a seperate key fob and can also be operated with a button on the dash and has an emergency release cable installed. This project turned out to be exactly what the customer wanted while keeping a factory built look.

For all of your custom and restoration needs contact us at (314) 968-8377 or www.cleancutcreations.com

Like us on face book at www.facebook.com/CCCSTL

For more pics see the full set at www.flickr.com/photos/cccstl/sets/72157632854930327/

Life Size Hot Wheels Super Van

This 2012 Ford Flex came to us needing rear suicide doors to make it handicap accessible. We completely disassembled the interior to begin the work. New hinge pockets were made in the door jamb and door. The door and quarter were also reinforced to handle the new hinge point. The door handles and latches were swapped side for side and moved to the front of the doors. We did this for two reasons, the first being functionality and the second aesthetics . With the door handles moved to the fornt of the doors, you get the classic look assoicated with the factory style rear suicide doors. Alot of effort also went into making the drivers side rear door power open and close. This door operates with a seperate key fob and can also be operated with a button on the dash and has an emergency release cable installed. This project turned out to be exactly what the customer wanted while keeping a factory built look.

For all of your custom and restoration needs contact us at (314) 968-8377 or www.cleancutcreations.com

Like us on face book at www.facebook.com/CCCSTL

For more pics see the full set at www.flickr.com/photos/cccstl/sets/72157632854930327/

This 2012 Ford Flex came to us needing rear suicide doors to make it handicap accessible. We completely disassembled the interior to begin the work. New hinge pockets were made in the door jamb and door. The door and quarter were also reinforced to handle the new hinge point. The door handles and latches were swapped side for side and moved to the front of the doors. We did this for two reasons, the first being functionality and the second aesthetics . With the door handles moved to the fornt of the doors, you get the classic look assoicated with the factory style rear suicide doors. Alot of effort also went into making the drivers side rear door power open and close. This door operates with a seperate key fob and can also be operated with a button on the dash and has an emergency release cable installed. This project turned out to be exactly what the customer wanted while keeping a factory built look.

For all of your custom and restoration needs contact us at (314) 968-8377 or www.cleancutcreations.com

Like us on face book at www.facebook.com/CCCSTL

For more pics see the full set at www.flickr.com/photos/cccstl/sets/72157632854930327/

This 1965 Pontaic Parisienne came in for a full restoration with some custom touches. The car was stripped down to bare metal we replaced the quarters, inner quarters & wheel houses, rockers were repaired floors, trunk floors and all bracing were replaced or repaired. The window set channel was repaired there was extensive rust repair done to the fenders and most panels on the car. A new convertible top was installed. The wheels were replaced with 20" & 22" Coy's 5 spoke wheel. A Custom 2 tone paint scheme was chosen with a custom Route 66 embalm with the color break mimicking the road stripe. A custom interior was installed by Styl'n Stiches. The brakes were upgraded to a dual circuit, with 14" disc brakes in front. A Ride Tech suspension system was installed. This project turned out awesome! The owner takes in on a annual trip down Route 66.

For all of your custom and restoration needs give us a call or click at www.cleancutcreations.com

or 314-968-8377

Like us on Face Book at www.facebook.com/CCCSTL

Follow the owners adventures at route66pontiac.com/

& www.facebook.com/Route66Pontiac?fref=ts

This Chevy Colorado received a custom licence plate box, recessed inside of the tailgate.

For all of your custom and restoration needs give us a call or click at (314)-968-8377 or www.cleancutcreations.com

Find and like us on Facebook at www.facebook.com/CCCSTL

This 2012 Ford Flex came to us needing rear suicide doors to make it handicap accessible. We completely disassembled the interior to begin the work. New hinge pockets were made in the door jamb and door. The door and quarter were also reinforced to handle the new hinge point. The door handles and latches were swapped side for side and moved to the front of the doors. We did this for two reasons, the first being functionality and the second aesthetics . With the door handles moved to the fornt of the doors, you get the classic look assoicated with the factory style rear suicide doors. Alot of effort also went into making the drivers side rear door power open and close. This door operates with a seperate key fob and can also be operated with a button on the dash and has an emergency release cable installed. This project turned out to be exactly what the customer wanted while keeping a factory built look.

For all of your custom and restoration needs contact us at (314) 968-8377 or www.cleancutcreations.com

Like us on face book at www.facebook.com/CCCSTL

For more pics see the full set at www.flickr.com/photos/cccstl/sets/72157632854930327/

This 1965 Pontaic Parisienne came in for a full restoration with some custom touches. The car was stripped down to bare metal we replaced the quarters, inner quarters & wheel houses, rockers were repaired floors, trunk floors and all bracing were replaced or repaired. The window set channel was repaired there was extensive rust repair done to the fenders and most panels on the car. A new convertible top was installed. The wheels were replaced with 20" & 22" Coy's 5 spoke wheel. A Custom 2 tone paint scheme was chosen with a custom Route 66 embalm with the color break mimicking the road stripe. A custom interior was installed by Styl'n Stiches. The brakes were upgraded to a dual circuit, with 14" disc brakes in front. A Ride Tech suspension system was installed. This project turned out awesome! The owner takes in on a annual trip down Route 66.

For all of your custom and restoration needs give us a call or click at www.cleancutcreations.com

or 314-968-8377

Like us on Face Book at www.facebook.com/CCCSTL

Follow the owners adventures at route66pontiac.com/

& www.facebook.com/Route66Pontiac?fref=ts

Clean Cut Creations Vintage Auto Works

This 2012 Ford Flex came to us needing rear suicide doors to make it handicap accessible. We completely disassembled the interior to begin the work. New hinge pockets were made in the door jamb and door. The door and quarter were also reinforced to handle the new hinge point. The door handles and latches were swapped side for side and moved to the front of the doors. We did this for two reasons, the first being functionality and the second aesthetics . With the door handles moved to the fornt of the doors, you get the classic look assoicated with the factory style rear suicide doors. Alot of effort also went into making the drivers side rear door power open and close. This door operates with a seperate key fob and can also be operated with a button on the dash and has an emergency release cable installed. This project turned out to be exactly what the customer wanted while keeping a factory built look.

For all of your custom and restoration needs contact us at (314) 968-8377 or www.cleancutcreations.com

Like us on face book at www.facebook.com/CCCSTL

For more pics see the full set at www.flickr.com/photos/cccstl/sets/72157632854930327/

1957 Chevy - Van

Body Work/Fabrication: Shaved Body Lines, Replaced All Flat Sheet Metal, Reshaped Front And Rear Wheel Wells,Front And Rear Roll Pan,, One Off Billet Snow Flake Grille, Tribar Halogen Headlights, Billet Specialities Tail Lights And Front Turn Signals,1932 Ford Door Handles,Custom Service Doors For Snow Cone Vending

Engine/Transmission: 400 Horse GM Crate Engine, 700R4, 3000 Stall Converter

Suspension/Chassis: Stock Solid Axle Front Suspension Replaced With R&B Obsolete Front Chassis Clip That Accepts S-10 Front Suspension Components. BYC 1 1/4 Narrowed Tubular Control Arms, Drop Spindles, 2600 LB Bags With Custom Cups. Rear Suspension AirRide Technologies 4 Link On An S-10 Axle with 9000 series bags, One Off Front Wheel Tubs, Engine Cover And Floor, Rear Tubs Raised 9 Inches With Step Notch.

Paint: White With White And Blue Flames, Stenciled Pearl Snow Flakes

Interior: Two Tone Leather Bucket Seats *Completed By Southtowne Upolstery*, Custom Smoothed Dash With 1932 Ford Oval Dakota Digital Guage Cluster, Billet Specialities Leather Wrap Steering Wheel On Top Of An IDIDIT Tilt Column,Gennie Floor Shifter, rear Of Vehicle Equipped For Snow Cone Vending.

Wheels & Tires: Billet Specialities 2005 3D Series Rail, 22x10's All Around.

To book the Snow Sled for your next event contact Saint Louis Snow Cone at (314)-968-8377

Find and like Saint Louis Snow Cone on Facebook at www.facebook.com/STLSnowCone?ref=hl

For all of your custom and restoration needs give us a call or click at (314)-968-8377 or www.cleancutcreations.com

Find and like us on Facebook at www.facebook.com/CCCSTL

This '69 Camaro RS Convertible came in for body work, paint and interior installation. We straightened most of the panels on the car, adjusted the doors for better fitment. adjusted the grille and repaired the RS hideaway headlights. Completely refinished the outside of the car & added a SS D90 Stripe (Hockey Stick) stripes to the sides. In the interior we recovered both front seats and the back seat with the Deluxe Hounds tooth option.

For all of your custom and restoration needs give us a call or click at 314-968-8377 or www.cleancutcreations.com

like us on Facebook at www.facebook.com/CCCSTL

This 2012 Ford Flex came to us needing rear suicide doors to make it handicap accessible. We completely disassembled the interior to begin the work. New hinge pockets were made in the door jamb and door. The door and quarter were also reinforced to handle the new hinge point. The door handles and latches were swapped side for side and moved to the front of the doors. We did this for two reasons, the first being functionality and the second aesthetics . With the door handles moved to the fornt of the doors, you get the classic look assoicated with the factory style rear suicide doors. Alot of effort also went into making the drivers side rear door power open and close. This door operates with a seperate key fob and can also be operated with a button on the dash and has an emergency release cable installed. This project turned out to be exactly what the customer wanted while keeping a factory built look.

For all of your custom and restoration needs contact us at (314) 968-8377 or www.cleancutcreations.com

Like us on face book at www.facebook.com/CCCSTL

For more pics see the full set at www.flickr.com/photos/cccstl/sets/72157632854930327/

This 1965 Pontaic Parisienne came in for a full restoration with some custom touches. The car was stripped down to bare metal we replaced the quarters, inner quarters & wheel houses, rockers were repaired floors, trunk floors and all bracing were replaced or repaired. The window set channel was repaired there was extensive rust repair done to the fenders and most panels on the car. A new convertible top was installed. The wheels were replaced with 20" & 22" Coy's 5 spoke wheel. A Custom 2 tone paint scheme was chosen with a custom Route 66 embalm with the color break mimicking the road stripe. A custom interior was installed by Styl'n Stiches. The brakes were upgraded to a dual circuit, with 14" disc brakes in front. A Ride Tech suspension system was installed. This project turned out awesome! The owner takes in on a annual trip down Route 66.

For all of your custom and restoration needs give us a call or click at www.cleancutcreations.com

or 314-968-8377

Like us on Face Book at www.facebook.com/CCCSTL

Follow the owners adventures at route66pontiac.com/

& www.facebook.com/Route66Pontiac?fref=ts

This '69 Camaro RS Convertible came in for body work, paint and interior installation. We straightened most of the panels on the car, adjusted the doors for better fitment. adjusted the grille and repaired the RS hideaway headlights. Completely refinished the outside of the car & added a SS D90 Stripe (Hockey Stick) stripes to the sides. In the interior we recovered both front seats and the back seat with the Deluxe Hounds tooth option.

For all of your custom and restoration needs give us a call or click at 314-968-8377 or www.cleancutcreations.com

like us on Facebook at www.facebook.com/CCCSTL