Lego is a line of plastic construction toys manufactured by the Lego Group, a privately held company based in Billund, Denmark. Lego consists of variously colored interlocking plastic bricks made of acrylonitrile butadiene styrene that accompany an array of gears, figurines called minifigures, and various other parts. Its pieces can be assembled and connected in many ways to construct objects, including vehicles, buildings, and working robots. Anything constructed can be taken apart again, and the pieces reused to make new things.

The Lego Group began manufacturing the interlocking toy bricks in 1949. Moulding is done in Denmark, Hungary, Mexico, and China. Brick decorations and packaging are done at plants in the former three countries and in the Czech Republic. Annual production of the bricks averages approximately 36 billion, or about 1140 elements per second.

Films, games competitions, and eight Legoland amusement parks have been developed under the brand. One of Europe's biggest companies, Lego is the largest toy manufacturer in the world by sales. As of July 2015, 600 billion Lego parts had been produced.

History

The Lego Group began in the workshop of Ole Kirk Christiansen (1891–1958), a carpenter from Billund, Denmark, who began making wooden toys in 1932. In 1934, his company came to be called "Lego", derived from the Danish phrase leg godt which means "play well". In 1947, Lego expanded to begin producing plastic toys. In 1949 the business began producing, among other new products, an early version of the now familiar interlocking bricks, calling them "Automatic Binding Bricks". These bricks were based on the Kiddicraft Self-Locking Bricks, invented by Hilary Page in 1939 and patented in the United Kingdom in 1940 before being displayed at the 1947 Earl's Court Toy Fair. Lego had received a sample of the Kiddicraft bricks from the supplier of an injection-molding machine that it purchased. The bricks, originally manufactured from cellulose acetate, were a development of the traditional stackable wooden blocks of the time.

The Lego Group's motto, "only the best is good enough" (Danish: det bedste er ikke for godt, literally "the best isn't excessively good") was created in 1936. Christiansen created the motto, still used today, to encourage his employees never to skimp on quality, a value he believed in strongly. By 1951, plastic toys accounted for half of the company's output, even though the Danish trade magazine Legetøjs-Tidende ("Toy Times"), visiting the Lego factory in Billund in the early 1950s, wrote that plastic would never be able to replace traditional wooden toys. Although a common sentiment, Lego toys seem to have become a significant exception to the dislike of plastic in children's toys, due in part to the high standards set by Ole Kirk.

By 1954, Christiansen's son, Godtfred, had become the junior managing director of the Lego Group. It was his conversation with an overseas buyer that led to the idea of a toy system. Godtfred saw the immense potential in Lego bricks to become a system for creative play, but the bricks still had some problems from a technical standpoint: Their locking ability was still limited, and they were not yet versatile. In 1958, the modern brick design was developed; it took five years to find the right material for it, ABS (acrylonitrile butadiene styrene) polymer. A patent application for the modern Lego brick design was filed in Denmark on 28 January 1958 and in various other countries in the subsequent few years.

The Lego Group's Duplo product line was introduced in 1969 and is a range of blocks whose lengths measure twice the width, height, and depth of standard Lego blocks and are aimed towards younger children. In 1978, Lego produced the first minifigures, which have since become a staple in most sets.

In May 2011, Space Shuttle Endeavour mission STS-134 brought 13 Lego kits to the International Space Station, where astronauts built models to see how they would react in microgravity, as a part of the Lego Bricks in Space program. In May 2013, the largest model ever created, made of over 5 million bricks, was displayed in New York City; a one-to-one scale model of a Star Wars X-wing fighter. Other record breakers include a 34-metre (112 ft) tower and a 4 km (2.5 mi) railway.

In February 2015, marketing consulting company Brand Finance ranked Lego as the "world's most powerful brand", overtaking Ferrari.

Lego bricks have acquired a reputation for causing extreme pain when stepped on.

Design

Lego pieces of all varieties constitute a universal system. Despite variations in the design and the purposes of individual pieces over the years, each remains compatible in some way with existing pieces. Lego bricks from 1958 still interlock with those made presently, and Lego sets for young children are compatible with those made for teenagers. Six bricks of 2 × 4 studs can be combined in 915,103,765 ways.

Each piece must be manufactured to an exacting degree of precision. When two pieces are engaged, they must fit firmly, yet be easily disassembled. The machines that manufacture Lego bricks have tolerances as small as 10 micrometres.

Primary concept and development work for the toy takes place at the Billund headquarters, where the company employs approximately 120 designers. The company also has smaller design offices in the UK, Spain, Germany, and Japan which are tasked with developing products aimed specifically at their respective national markets. The average development period for a new product is around twelve months, split into three stages. The first is to identify market trends and developments, including contact by the designers directly with the market; some are stationed in toy shops close to holidays, while others interview children. The second stage is the design and development of the product based on the results of the first stage. As of September 2008 the design teams use 3D modelling software to generate CAD drawings from initial design sketches. The designs are then prototyped using an in-house stereolithography machine. These prototypes are presented to the entire project team for comment and testing by parents and children during the "validation" process. Designs may then be altered in accordance with the results from the focus groups. Virtual models of completed Lego products are built concurrently with the writing of the user instructions. Completed CAD models are also used in the wider organisation for marketing and packaging.

Lego Digital Designer is an official piece of Lego software for Mac OS X and Windows which allows users to create their own digital Lego designs. The program once allowed customers to order custom designs with a service to ship physical models from Digital Designer to consumers; the service ended in 2012.

Manufacturing

Since 1963, Lego pieces have been manufactured from acrylonitrile butadiene styrene (ABS). As of September 2008, Lego engineers use the NX CAD/CAM/CAE PLM software suite to model the elements. The software allows the parts to be optimised by way of mould flow and stress analysis. Prototype moulds are sometimes built before the design is committed to mass production. The ABS plastic is heated to 232 °C (450 °F) until it reaches a dough-like consistency. It is then injected into the moulds using forces of between 25 and 150 tonnes and takes approximately 15 seconds to cool. The moulds are permitted a tolerance of up to twenty micrometres to ensure the bricks remain connected. Human inspectors check the output of the moulds to eliminate significant variations in colour or thickness. According to the Lego Group, about eighteen bricks out of every million fail to meet the standard required.

Lego factories recycle all but about 1 percent of their plastic waste from the manufacturing process. If the plastic cannot be re-used in Lego bricks, it is processed and sold on to industries that can make use of it. Lego, in 2018, set a self-imposed 2030 deadline to find a more eco-friendly alternative to the ABS plastic.

Manufacturing of Lego bricks occurs at several locations around the world. Moulding is done in Billund, Denmark; Nyíregyháza, Hungary; Monterrey, Mexico; and most recently in Jiaxing, China. Brick decorations and packaging are done at plants in the former three countries and in Kladno in the Czech Republic. The Lego Group estimates that in five decades it has produced 400 billion Lego blocks. Annual production of the bricks averages approximately 36 billion, or about 1140 elements per second. According to an article in BusinessWeek in 2006, Lego could also be considered the world's number-one tyre manufacturer; the factory produces about 306 million small rubber tyres a year. The claim was reiterated in 2012.

In December 2012, the BBC's More or Less radio program asked the Open University's engineering department to determine "how many Lego bricks, stacked one on top of the other, it would take for the weight to destroy the bottom brick?" Using a hydraulic testing machine, members of the department determined the average maximum force a 2×2 Lego brick can stand is 4,240 newtons. Since an average 2×2 Lego brick has a mass of 1.152 grams (0.0406 oz), according to their calculations it would take a stack of 375,000 bricks to cause the bottom brick to collapse, which represents a stack 3,591 metres (11,781 ft) in height.

Private tests have shown several thousand assembly-disassembly cycles before the bricks begin to wear out, although Lego tests show fewer cycles.

In 2018, Lego announced that it will be using bio-derived polyethylene to make its botanical elements (parts such as leaves, bushes and trees). The New York Times reported the company's footprint that year was "about a million tons of carbon dioxide each year" and that it was investing about 1 billion kroner and hiring 100 people to work on changes. The paper reported that Lego's researchers "have already experimented with around 200 alternatives." In 2020, Lego announced that it would cease packaging its products in single-use plastic bags and would instead be using recyclable paper bags. In 2021, the company said it would aim to produce its bricks without using crude oil, by using recycled polyethylene terephthalate bottles, but in 2023 it reversed this decision, having found that this did not reduce its carbon dioxide emissions.

Set themes

Since the 1950s, the Lego Group has released thousands of sets with a variety of themes, including space, pirates, trains, (European) castle, dinosaurs, undersea exploration, and wild west, as well as wholly original themes like Bionicle and Hero Factory. Some of the classic themes that continue to the present day include Lego City (a line of sets depicting city life introduced in 1973) and Lego Technic (a line aimed at emulating complex machinery, introduced in 1977).

Over the years, the company has licensed themes from numerous cartoon and film franchises and some from video games. These include Batman, Indiana Jones, Pirates of the Caribbean, Harry Potter, Star Wars, Marvel, and Minecraft. Although some of these themes, Lego Star Wars and Lego Indiana Jones, had highly successful sales, the company expressed in 2015 a desire to rely more upon their own characters and classic themes and less upon such licensed themes. Some sets include references to other themes such as a Bionicle mask in one of the Harry Potter sets. Discontinued sets may become a collectable and command value on the black market.

For the 2012 Summer Olympics in London, Lego released a special Team GB Minifigures series exclusively in the United Kingdom to mark the opening of the games. For the 2016 Summer Olympics and 2016 Summer Paralympics in Rio de Janeiro, Lego released a kit with the Olympic and Paralympic mascots Vinicius and Tom.

One of the largest commercially produced Lego sets was a minifig-scaled edition of the Star Wars Millennium Falcon. Designed by Jens Kronvold Fredericksen, it was released in 2007 and contained 5,195 pieces. It was surpassed by a 5,922-piece Taj Mahal. A redesigned Millennium Falcon retook the top spot in 2017 with 7,541 pieces. Since then, the Millennium Falcon has been superseded by the Lego Art World Map at 11,695 pieces, the Lego Titanic at 9,090 pieces, and the Lego Architect Colosseum at 9,036 pieces.

In 2022, Lego introduced its Eiffel Tower. The set consists of 10,000 parts and reaches a height of 149 cm, which makes it the tallest set and tower but the second in number of parts after the World Map.

Robotics themes

Main articles: Lego Mindstorms, Lego Mindstorms NXT, Lego Mindstorms NXT 2.0, and Lego Mindstorms EV3

The company also initiated a robotics line of toys called 'Mindstorms' in 1999, and has continued to expand and update this range ever since. The roots of the product originate from a programmable brick developed at the MIT Media Lab, and the name is taken from a paper by Seymour Papert, a computer scientist and educator who developed the educational theory of constructionism, and whose research was at times funded by the Lego Group.

The programmable Lego brick which is at the heart of these robotics sets has undergone several updates and redesigns, with the latest being called the 'EV3' brick, being sold under the name of Lego Mindstorms EV3. The set includes sensors that detect touch, light, sound and ultrasonic waves, with several others being sold separately, including an RFID reader.

The intelligent brick can be programmed using official software available for Windows and Mac computers, and is downloaded onto the brick via Bluetooth or a USB cable. There are also several unofficial programs and compatible programming languages that have been made to work with the brick, and many books have been written to support this community.

There are several robotics competitions which use the Lego robotics sets. The earliest is Botball, a national U.S. middle- and high-school competition stemming from the MIT 6.270 Lego robotics tournament. Other Lego robotics competitions include FIRST LEGO League Discover for children ages 4–6, FIRST LEGO League Explore for students ages 6–9 and FIRST Lego League Challenge for students ages 9–16 (age 9–14 in the United States, Canada, and Mexico). These programs offer real-world engineering challenges to participants. FIRST LEGO League Challenge uses LEGO-based robots to complete tasks, FIRST LEGO League Explore participants build models out of Lego elements, and FIRST LEGO League Discover participants use Duplo. In its 2019–2020 season, there were 38,609 FIRST LEGO League Challenge teams and 21,703 FIRST LEGO League Explore teams around the world. The international RoboCup Junior football competition involves extensive use of Lego Mindstorms equipment which is often pushed to its extreme limits.

The capabilities of the Mindstorms range have now been harnessed for use in Iko Creative Prosthetic System, a prosthetic limbs system designed for children. Designs for these Lego prosthetics allow everything from mechanical diggers to laser-firing spaceships to be screwed on to the end of a child's limb. Iko is the work of the Chicago-based Colombian designer Carlos Arturo Torres, and is a modular system that allows children to customise their own prosthetics with the ease of clicking together plastic bricks. Designed with Lego's Future Lab, the Danish toy company's experimental research department, and Cirec, a Colombian foundation for physical rehabilitation, the modular prosthetic incorporates myoelectric sensors that register the activity of the muscle in the stump and send a signal to control movement in the attachment. A processing unit in the body of the prosthetic contains an engine compatible with Lego Mindstorms, the company's robotics line, which lets the wearer build an extensive range of customised, programmable limbs.

In popular culture

Lego's popularity is demonstrated by its wide representation and usage in many cultural works, including books, films, and art. It has even been used in the classroom as a teaching tool. In the US, Lego Education North America is a joint venture between Pitsco, Inc. and the educational division of the Lego Group.

In 1998, Lego bricks were one of the original inductees into the National Toy Hall of Fame at The Strong in Rochester, New York.

"Lego" is commonly used as a mass noun ("some Lego") or, in American English, as a countable noun with plural "Legos", to refer to the bricks themselves, but as is common for trademarks, Lego group insists on the name being used as an adjective when referring to a product (as in "LEGO bricks").

Todo final de ano eu compro um sapato e esse foi o escolhido, sabe amor a primeira vista... já estava namorando ele ha um mês na loja e resando pra não ser vendido, afinal as lojas só compram um par de cada modelo no tam 34!!!

Se pueden hacer pedidos de cada modelo y con cambio en los colores.

Compra directamente en mi tienda online:

www.creacionestitare.com

Consultar precios y demás enviadme un e-mail a:

brochestitare@hotmail.com

My project, SpaceframeSCAD, as shown at Bay Area Maker Faire.

The goal was to make large scale pieces of light art that would print on a 3D printer and pack up in a ziploc bag. I really did build up the hex wall from three gallon ziploc bags on Thursday night before the big show, even if I did bring the truss pilar in already partially assembled.

It's all OpenSCAD, which means that I wrote code that generates the geometry based on paramaters instead of needing to individually CAD model each piece.

Con crunch kinda ate the past month or two, oops. Had to individually crimp Molex MicroFit 3.0 pigtails and solder them to the LED strips and stuff while minding my Voron Trident printing until the last minute to see if I could get the pillar any taller.

Light show was a DMX512 ArtNet controlled show via QLC+ using some ESP32 boards running WLED I designed up in a rush before the tariffs hit.

A CAD model of my art storage unit I sketched on Rhino to help me work out the dimentions for my finished project.

December 2015

All the parts loosely stuck together. Looks quite like the CAD model, right?

More info and part files here:

kadookacameraworks.com

-------

Lux is my proof-of-concept platform for my new electronic shutter (see SLS, single leaf shutter). A secondary goal for this camera was to make it completely homegrown, meaning no parts from existing camera manufacturers, with single-element lenses from Anchor Optics.

Type: Box Camera

Medium: 6x6cm, (56x56mm nominal), 120 film

Focusing: Unassisted, helical focus with distance scale

Objective: Single element 80mm(?), glass, MgF2 coated

Viewfinder: Waist-level brilliant finder

Diaphragm: Rotary aperture plate, f/6.3,8,11,22,32

Shutter: Electronically controlled single-leaf shutter (1/125s(?) - 1s + B & T)

Construction: 3D printed polyamide (nylon), laser cut stainless steel

Lego is a line of plastic construction toys manufactured by the Lego Group, a privately held company based in Billund, Denmark. Lego consists of variously colored interlocking plastic bricks made of acrylonitrile butadiene styrene that accompany an array of gears, figurines called minifigures, and various other parts. Its pieces can be assembled and connected in many ways to construct objects, including vehicles, buildings, and working robots. Anything constructed can be taken apart again, and the pieces reused to make new things.

The Lego Group began manufacturing the interlocking toy bricks in 1949. Moulding is done in Denmark, Hungary, Mexico, and China. Brick decorations and packaging are done at plants in the former three countries and in the Czech Republic. Annual production of the bricks averages approximately 36 billion, or about 1140 elements per second.

Films, games competitions, and eight Legoland amusement parks have been developed under the brand. One of Europe's biggest companies, Lego is the largest toy manufacturer in the world by sales. As of July 2015, 600 billion Lego parts had been produced.

History

The Lego Group began in the workshop of Ole Kirk Christiansen (1891–1958), a carpenter from Billund, Denmark, who began making wooden toys in 1932. In 1934, his company came to be called "Lego", derived from the Danish phrase leg godt which means "play well". In 1947, Lego expanded to begin producing plastic toys. In 1949 the business began producing, among other new products, an early version of the now familiar interlocking bricks, calling them "Automatic Binding Bricks". These bricks were based on the Kiddicraft Self-Locking Bricks, invented by Hilary Page in 1939 and patented in the United Kingdom in 1940 before being displayed at the 1947 Earl's Court Toy Fair. Lego had received a sample of the Kiddicraft bricks from the supplier of an injection-molding machine that it purchased. The bricks, originally manufactured from cellulose acetate, were a development of the traditional stackable wooden blocks of the time.

The Lego Group's motto, "only the best is good enough" (Danish: det bedste er ikke for godt, literally "the best isn't excessively good") was created in 1936. Christiansen created the motto, still used today, to encourage his employees never to skimp on quality, a value he believed in strongly. By 1951, plastic toys accounted for half of the company's output, even though the Danish trade magazine Legetøjs-Tidende ("Toy Times"), visiting the Lego factory in Billund in the early 1950s, wrote that plastic would never be able to replace traditional wooden toys. Although a common sentiment, Lego toys seem to have become a significant exception to the dislike of plastic in children's toys, due in part to the high standards set by Ole Kirk.

By 1954, Christiansen's son, Godtfred, had become the junior managing director of the Lego Group. It was his conversation with an overseas buyer that led to the idea of a toy system. Godtfred saw the immense potential in Lego bricks to become a system for creative play, but the bricks still had some problems from a technical standpoint: Their locking ability was still limited, and they were not yet versatile. In 1958, the modern brick design was developed; it took five years to find the right material for it, ABS (acrylonitrile butadiene styrene) polymer. A patent application for the modern Lego brick design was filed in Denmark on 28 January 1958 and in various other countries in the subsequent few years.

The Lego Group's Duplo product line was introduced in 1969 and is a range of blocks whose lengths measure twice the width, height, and depth of standard Lego blocks and are aimed towards younger children. In 1978, Lego produced the first minifigures, which have since become a staple in most sets.

In May 2011, Space Shuttle Endeavour mission STS-134 brought 13 Lego kits to the International Space Station, where astronauts built models to see how they would react in microgravity, as a part of the Lego Bricks in Space program. In May 2013, the largest model ever created, made of over 5 million bricks, was displayed in New York City; a one-to-one scale model of a Star Wars X-wing fighter. Other record breakers include a 34-metre (112 ft) tower and a 4 km (2.5 mi) railway.

In February 2015, marketing consulting company Brand Finance ranked Lego as the "world's most powerful brand", overtaking Ferrari.

Lego bricks have acquired a reputation for causing extreme pain when stepped on.

Design

Lego pieces of all varieties constitute a universal system. Despite variations in the design and the purposes of individual pieces over the years, each remains compatible in some way with existing pieces. Lego bricks from 1958 still interlock with those made presently, and Lego sets for young children are compatible with those made for teenagers. Six bricks of 2 × 4 studs can be combined in 915,103,765 ways.

Each piece must be manufactured to an exacting degree of precision. When two pieces are engaged, they must fit firmly, yet be easily disassembled. The machines that manufacture Lego bricks have tolerances as small as 10 micrometres.

Primary concept and development work for the toy takes place at the Billund headquarters, where the company employs approximately 120 designers. The company also has smaller design offices in the UK, Spain, Germany, and Japan which are tasked with developing products aimed specifically at their respective national markets. The average development period for a new product is around twelve months, split into three stages. The first is to identify market trends and developments, including contact by the designers directly with the market; some are stationed in toy shops close to holidays, while others interview children. The second stage is the design and development of the product based on the results of the first stage. As of September 2008 the design teams use 3D modelling software to generate CAD drawings from initial design sketches. The designs are then prototyped using an in-house stereolithography machine. These prototypes are presented to the entire project team for comment and testing by parents and children during the "validation" process. Designs may then be altered in accordance with the results from the focus groups. Virtual models of completed Lego products are built concurrently with the writing of the user instructions. Completed CAD models are also used in the wider organisation for marketing and packaging.

Lego Digital Designer is an official piece of Lego software for Mac OS X and Windows which allows users to create their own digital Lego designs. The program once allowed customers to order custom designs with a service to ship physical models from Digital Designer to consumers; the service ended in 2012.

Manufacturing

Since 1963, Lego pieces have been manufactured from acrylonitrile butadiene styrene (ABS). As of September 2008, Lego engineers use the NX CAD/CAM/CAE PLM software suite to model the elements. The software allows the parts to be optimised by way of mould flow and stress analysis. Prototype moulds are sometimes built before the design is committed to mass production. The ABS plastic is heated to 232 °C (450 °F) until it reaches a dough-like consistency. It is then injected into the moulds using forces of between 25 and 150 tonnes and takes approximately 15 seconds to cool. The moulds are permitted a tolerance of up to twenty micrometres to ensure the bricks remain connected. Human inspectors check the output of the moulds to eliminate significant variations in colour or thickness. According to the Lego Group, about eighteen bricks out of every million fail to meet the standard required.

Lego factories recycle all but about 1 percent of their plastic waste from the manufacturing process. If the plastic cannot be re-used in Lego bricks, it is processed and sold on to industries that can make use of it. Lego, in 2018, set a self-imposed 2030 deadline to find a more eco-friendly alternative to the ABS plastic.

Manufacturing of Lego bricks occurs at several locations around the world. Moulding is done in Billund, Denmark; Nyíregyháza, Hungary; Monterrey, Mexico; and most recently in Jiaxing, China. Brick decorations and packaging are done at plants in the former three countries and in Kladno in the Czech Republic. The Lego Group estimates that in five decades it has produced 400 billion Lego blocks. Annual production of the bricks averages approximately 36 billion, or about 1140 elements per second. According to an article in BusinessWeek in 2006, Lego could also be considered the world's number-one tyre manufacturer; the factory produces about 306 million small rubber tyres a year. The claim was reiterated in 2012.

In December 2012, the BBC's More or Less radio program asked the Open University's engineering department to determine "how many Lego bricks, stacked one on top of the other, it would take for the weight to destroy the bottom brick?" Using a hydraulic testing machine, members of the department determined the average maximum force a 2×2 Lego brick can stand is 4,240 newtons. Since an average 2×2 Lego brick has a mass of 1.152 grams (0.0406 oz), according to their calculations it would take a stack of 375,000 bricks to cause the bottom brick to collapse, which represents a stack 3,591 metres (11,781 ft) in height.

Private tests have shown several thousand assembly-disassembly cycles before the bricks begin to wear out, although Lego tests show fewer cycles.

In 2018, Lego announced that it will be using bio-derived polyethylene to make its botanical elements (parts such as leaves, bushes and trees). The New York Times reported the company's footprint that year was "about a million tons of carbon dioxide each year" and that it was investing about 1 billion kroner and hiring 100 people to work on changes. The paper reported that Lego's researchers "have already experimented with around 200 alternatives." In 2020, Lego announced that it would cease packaging its products in single-use plastic bags and would instead be using recyclable paper bags. In 2021, the company said it would aim to produce its bricks without using crude oil, by using recycled polyethylene terephthalate bottles, but in 2023 it reversed this decision, having found that this did not reduce its carbon dioxide emissions.

Set themes

Since the 1950s, the Lego Group has released thousands of sets with a variety of themes, including space, pirates, trains, (European) castle, dinosaurs, undersea exploration, and wild west, as well as wholly original themes like Bionicle and Hero Factory. Some of the classic themes that continue to the present day include Lego City (a line of sets depicting city life introduced in 1973) and Lego Technic (a line aimed at emulating complex machinery, introduced in 1977).

Over the years, the company has licensed themes from numerous cartoon and film franchises and some from video games. These include Batman, Indiana Jones, Pirates of the Caribbean, Harry Potter, Star Wars, Marvel, and Minecraft. Although some of these themes, Lego Star Wars and Lego Indiana Jones, had highly successful sales, the company expressed in 2015 a desire to rely more upon their own characters and classic themes and less upon such licensed themes. Some sets include references to other themes such as a Bionicle mask in one of the Harry Potter sets. Discontinued sets may become a collectable and command value on the black market.

For the 2012 Summer Olympics in London, Lego released a special Team GB Minifigures series exclusively in the United Kingdom to mark the opening of the games. For the 2016 Summer Olympics and 2016 Summer Paralympics in Rio de Janeiro, Lego released a kit with the Olympic and Paralympic mascots Vinicius and Tom.

One of the largest commercially produced Lego sets was a minifig-scaled edition of the Star Wars Millennium Falcon. Designed by Jens Kronvold Fredericksen, it was released in 2007 and contained 5,195 pieces. It was surpassed by a 5,922-piece Taj Mahal. A redesigned Millennium Falcon retook the top spot in 2017 with 7,541 pieces. Since then, the Millennium Falcon has been superseded by the Lego Art World Map at 11,695 pieces, the Lego Titanic at 9,090 pieces, and the Lego Architect Colosseum at 9,036 pieces.

In 2022, Lego introduced its Eiffel Tower. The set consists of 10,000 parts and reaches a height of 149 cm, which makes it the tallest set and tower but the second in number of parts after the World Map.

Robotics themes

Main articles: Lego Mindstorms, Lego Mindstorms NXT, Lego Mindstorms NXT 2.0, and Lego Mindstorms EV3

The company also initiated a robotics line of toys called 'Mindstorms' in 1999, and has continued to expand and update this range ever since. The roots of the product originate from a programmable brick developed at the MIT Media Lab, and the name is taken from a paper by Seymour Papert, a computer scientist and educator who developed the educational theory of constructionism, and whose research was at times funded by the Lego Group.

The programmable Lego brick which is at the heart of these robotics sets has undergone several updates and redesigns, with the latest being called the 'EV3' brick, being sold under the name of Lego Mindstorms EV3. The set includes sensors that detect touch, light, sound and ultrasonic waves, with several others being sold separately, including an RFID reader.

The intelligent brick can be programmed using official software available for Windows and Mac computers, and is downloaded onto the brick via Bluetooth or a USB cable. There are also several unofficial programs and compatible programming languages that have been made to work with the brick, and many books have been written to support this community.

There are several robotics competitions which use the Lego robotics sets. The earliest is Botball, a national U.S. middle- and high-school competition stemming from the MIT 6.270 Lego robotics tournament. Other Lego robotics competitions include FIRST LEGO League Discover for children ages 4–6, FIRST LEGO League Explore for students ages 6–9 and FIRST Lego League Challenge for students ages 9–16 (age 9–14 in the United States, Canada, and Mexico). These programs offer real-world engineering challenges to participants. FIRST LEGO League Challenge uses LEGO-based robots to complete tasks, FIRST LEGO League Explore participants build models out of Lego elements, and FIRST LEGO League Discover participants use Duplo. In its 2019–2020 season, there were 38,609 FIRST LEGO League Challenge teams and 21,703 FIRST LEGO League Explore teams around the world. The international RoboCup Junior football competition involves extensive use of Lego Mindstorms equipment which is often pushed to its extreme limits.

The capabilities of the Mindstorms range have now been harnessed for use in Iko Creative Prosthetic System, a prosthetic limbs system designed for children. Designs for these Lego prosthetics allow everything from mechanical diggers to laser-firing spaceships to be screwed on to the end of a child's limb. Iko is the work of the Chicago-based Colombian designer Carlos Arturo Torres, and is a modular system that allows children to customise their own prosthetics with the ease of clicking together plastic bricks. Designed with Lego's Future Lab, the Danish toy company's experimental research department, and Cirec, a Colombian foundation for physical rehabilitation, the modular prosthetic incorporates myoelectric sensors that register the activity of the muscle in the stump and send a signal to control movement in the attachment. A processing unit in the body of the prosthetic contains an engine compatible with Lego Mindstorms, the company's robotics line, which lets the wearer build an extensive range of customised, programmable limbs.

In popular culture

Lego's popularity is demonstrated by its wide representation and usage in many cultural works, including books, films, and art. It has even been used in the classroom as a teaching tool. In the US, Lego Education North America is a joint venture between Pitsco, Inc. and the educational division of the Lego Group.

In 1998, Lego bricks were one of the original inductees into the National Toy Hall of Fame at The Strong in Rochester, New York.

"Lego" is commonly used as a mass noun ("some Lego") or, in American English, as a countable noun with plural "Legos", to refer to the bricks themselves, but as is common for trademarks, Lego group insists on the name being used as an adjective when referring to a product (as in "LEGO bricks").

prismacolor pencil, pilot razorpoint on paper (CAD model plot), 11 x 17, 2013

A while back, I posted a picture of a CAD model I had made for a minifig-compatible skeleton leg. And now, I have the physical version!

Channel frame scratched from styrene sheet. The journals, pedestals and tractor supports were 3D printed by Shapeways from my CAD models.

Soho Cadet Model B strut-folding Bakelite camera for eight 6x9cm exposures on medium format rollfilm. Fixed focus meniscus lens, everset shutter with T and I settings.

photo-analogue.blogspot.co.uk/2016/05/soho-cadet-model-b....

Este fin de semana visitamos unas MInas de Wolframio, con mis amigos del grupo de Geológicas, Honix, Alex, Inma y Mariu.

Aún pendientes de controlar los flashes, con nuestros problemillas de ajuste. Sin embargo, a veces un problema se convierte en una oportunidad.

La foto iba a tener 3 flashes, uno frontal, y uno detrás de cada modelo. Pero el flash frontal no se disparó y quedó un bonito contraluz.

¿Qué os parece?

Camera: Canon EOS 5D Mark II

Exposure: 1/100

Aperture: f/7.1

Focal Length: 23 mm

ISO Speed: 250

Exposure Program: Manual

Lens: EF16-35mm f/2.8L II USM

Flashes Yongnuo

An Online Easy-To-Use 3D CAD Design Tool

www.selfcad.com

This is my CAD model for the part I had made by Shapeways. It might have taken an hour to create this model, probably less (of course, it's a pretty simple part)

prismacolor pencil, pilot razorpoint on paper (CAD model plot), 11 x 17, 2013

In 1999, in the early days of the world wide web, I was commissioned to design an internet cafe. I decided that rather than having a basic tiled ceiling I would design a bespoke feature panel which related more to the function of the space.

I took my inspiration for its design from the Marvel comic book “Strange Tales”. This was produced by Stan Lee and Steve Ditko and featured their fictional character "Doctor Strange". His adventures took place in a surreal cosmic landscape in which artist Ditko made references to Dali, Man Ray, hallucinogens, Eastern mysticism and a Jungian integration of conscious and unconscious.

Encouraged by a growing cult following, Ditko took Dr Strange into ever more abstract realms, inhabited by ever more complex beings. Some were drawn with a two dimensional silhouette form filled with cosmic symbols. Dr. Strange's world, with its twisting dimensions and shifting time warps was incoherent, intangible and even a little disturbing. Since many people felt the same way about the new internet phenomenon I thought it would be a suitable design reference.

The original fixed PC desking and cabling has all since been stripped out due to portable tablets and smart phones coming into common use but happily my ceiling design survives. It's a cultural snapshot and an homage to Dr. Strange and a

gateway to Lee and Ditko’s cosmic universe.

Technical note : the panel was constructed in thick MDF board with the relief work cut out by a CNC wood routing tool linked to my CAD model.

Link to examples of Ditko's surreal artwork :

michelfiffe.com/?p=124

Designed over the course of about ten years, through multiple design generations in LEGO bricks, most of which are now lost to history. Inspiration for it are three engines: Southern Pacific 4449, Union Pacific 3985(RIP), and Union Pacific 4014. This CAD model was done in Blender over an 8 month period for use in Minecraft using the Immersive Railroading mod. This model was designed with the intention of real life plausibility. Check the mod out here: discord.gg/dDmKcFB4H8

Stats:

Cylinders(dia. x stroke): 30" x

32"

Driver Dia: 84"

Boiler Pressure: 300 PSI

Tractive Effort: 184,716 lbs(224, 617 lbs with both booster engines active)

Horsepower: 8600

Bearings: Timken Roller Bearings(All axles and running gear where applicable)

Top Speed: Approximately 110-124 miles per hour

Fuel: Oil(20,000 gallon tender capacity)

Tender Water Capacity: 35,000 gallons(Water Trough Scoop equipped)

Purchase Price(1950): $750,000

It’s been a really long time since I’ve built anything from LEGO and what better way to celebrate my triumphant return than by conquering the car that’s haunted me for well over a decade. I’ve been trying to build a Lotus Exige for a very long time now, in various scales and techniques, but it always ended in failure. Finally I have captured it in a way that I am ~mostly~ satisfied with.

This is my first ever attempt at building something in “speed champions” scale and it introduced me into a lot of new LEGO parts that I have never utilized before. I definitely see the appeal and I’m keen to try other models in this scale as long as the inspiration keeps flowing.

I started with just the Exige model, but halfway through the design I found an easy opportunity to include the roadster "Elise" model as well which features some minute differences including: A removable roof, fog lamps, rear vented deck, thinner side intakes, and different exhaust. Both cars met my expectations well enough to dig me out of the rutt I've been stuck in for so long. I think I personally prefer the Exige model, especially the way it looks from a bird's eye view which captures the pinched waistline that the car is iconic for.

Let me know what you think! Depending on how I can fudge the 3D CAD model, I MIGHT be able to get some instructions up on rebrickable at a later date.

Also, I have started posting my LEGO cars on Instagram now along with some of my real life car stuff, and I have almost no LEGO followers yet, so I would really appreciate if anyone wants to share my account! Thank you!

www.instagram.com/krud_kars/

Lego is a line of plastic construction toys manufactured by the Lego Group, a privately held company based in Billund, Denmark. Lego consists of variously colored interlocking plastic bricks made of acrylonitrile butadiene styrene that accompany an array of gears, figurines called minifigures, and various other parts. Its pieces can be assembled and connected in many ways to construct objects, including vehicles, buildings, and working robots. Anything constructed can be taken apart again, and the pieces reused to make new things.

The Lego Group began manufacturing the interlocking toy bricks in 1949. Moulding is done in Denmark, Hungary, Mexico, and China. Brick decorations and packaging are done at plants in the former three countries and in the Czech Republic. Annual production of the bricks averages approximately 36 billion, or about 1140 elements per second.

Films, games competitions, and eight Legoland amusement parks have been developed under the brand. One of Europe's biggest companies, Lego is the largest toy manufacturer in the world by sales. As of July 2015, 600 billion Lego parts had been produced.

History

The Lego Group began in the workshop of Ole Kirk Christiansen (1891–1958), a carpenter from Billund, Denmark, who began making wooden toys in 1932. In 1934, his company came to be called "Lego", derived from the Danish phrase leg godt which means "play well". In 1947, Lego expanded to begin producing plastic toys. In 1949 the business began producing, among other new products, an early version of the now familiar interlocking bricks, calling them "Automatic Binding Bricks". These bricks were based on the Kiddicraft Self-Locking Bricks, invented by Hilary Page in 1939 and patented in the United Kingdom in 1940 before being displayed at the 1947 Earl's Court Toy Fair. Lego had received a sample of the Kiddicraft bricks from the supplier of an injection-molding machine that it purchased. The bricks, originally manufactured from cellulose acetate, were a development of the traditional stackable wooden blocks of the time.

The Lego Group's motto, "only the best is good enough" (Danish: det bedste er ikke for godt, literally "the best isn't excessively good") was created in 1936. Christiansen created the motto, still used today, to encourage his employees never to skimp on quality, a value he believed in strongly. By 1951, plastic toys accounted for half of the company's output, even though the Danish trade magazine Legetøjs-Tidende ("Toy Times"), visiting the Lego factory in Billund in the early 1950s, wrote that plastic would never be able to replace traditional wooden toys. Although a common sentiment, Lego toys seem to have become a significant exception to the dislike of plastic in children's toys, due in part to the high standards set by Ole Kirk.

By 1954, Christiansen's son, Godtfred, had become the junior managing director of the Lego Group. It was his conversation with an overseas buyer that led to the idea of a toy system. Godtfred saw the immense potential in Lego bricks to become a system for creative play, but the bricks still had some problems from a technical standpoint: Their locking ability was still limited, and they were not yet versatile. In 1958, the modern brick design was developed; it took five years to find the right material for it, ABS (acrylonitrile butadiene styrene) polymer. A patent application for the modern Lego brick design was filed in Denmark on 28 January 1958 and in various other countries in the subsequent few years.

The Lego Group's Duplo product line was introduced in 1969 and is a range of blocks whose lengths measure twice the width, height, and depth of standard Lego blocks and are aimed towards younger children. In 1978, Lego produced the first minifigures, which have since become a staple in most sets.

In May 2011, Space Shuttle Endeavour mission STS-134 brought 13 Lego kits to the International Space Station, where astronauts built models to see how they would react in microgravity, as a part of the Lego Bricks in Space program. In May 2013, the largest model ever created, made of over 5 million bricks, was displayed in New York City; a one-to-one scale model of a Star Wars X-wing fighter. Other record breakers include a 34-metre (112 ft) tower and a 4 km (2.5 mi) railway.

In February 2015, marketing consulting company Brand Finance ranked Lego as the "world's most powerful brand", overtaking Ferrari.

Lego bricks have acquired a reputation for causing extreme pain when stepped on.

Design

Lego pieces of all varieties constitute a universal system. Despite variations in the design and the purposes of individual pieces over the years, each remains compatible in some way with existing pieces. Lego bricks from 1958 still interlock with those made presently, and Lego sets for young children are compatible with those made for teenagers. Six bricks of 2 × 4 studs can be combined in 915,103,765 ways.

Each piece must be manufactured to an exacting degree of precision. When two pieces are engaged, they must fit firmly, yet be easily disassembled. The machines that manufacture Lego bricks have tolerances as small as 10 micrometres.

Primary concept and development work for the toy takes place at the Billund headquarters, where the company employs approximately 120 designers. The company also has smaller design offices in the UK, Spain, Germany, and Japan which are tasked with developing products aimed specifically at their respective national markets. The average development period for a new product is around twelve months, split into three stages. The first is to identify market trends and developments, including contact by the designers directly with the market; some are stationed in toy shops close to holidays, while others interview children. The second stage is the design and development of the product based on the results of the first stage. As of September 2008 the design teams use 3D modelling software to generate CAD drawings from initial design sketches. The designs are then prototyped using an in-house stereolithography machine. These prototypes are presented to the entire project team for comment and testing by parents and children during the "validation" process. Designs may then be altered in accordance with the results from the focus groups. Virtual models of completed Lego products are built concurrently with the writing of the user instructions. Completed CAD models are also used in the wider organisation for marketing and packaging.

Lego Digital Designer is an official piece of Lego software for Mac OS X and Windows which allows users to create their own digital Lego designs. The program once allowed customers to order custom designs with a service to ship physical models from Digital Designer to consumers; the service ended in 2012.

Manufacturing

Since 1963, Lego pieces have been manufactured from acrylonitrile butadiene styrene (ABS). As of September 2008, Lego engineers use the NX CAD/CAM/CAE PLM software suite to model the elements. The software allows the parts to be optimised by way of mould flow and stress analysis. Prototype moulds are sometimes built before the design is committed to mass production. The ABS plastic is heated to 232 °C (450 °F) until it reaches a dough-like consistency. It is then injected into the moulds using forces of between 25 and 150 tonnes and takes approximately 15 seconds to cool. The moulds are permitted a tolerance of up to twenty micrometres to ensure the bricks remain connected. Human inspectors check the output of the moulds to eliminate significant variations in colour or thickness. According to the Lego Group, about eighteen bricks out of every million fail to meet the standard required.

Lego factories recycle all but about 1 percent of their plastic waste from the manufacturing process. If the plastic cannot be re-used in Lego bricks, it is processed and sold on to industries that can make use of it. Lego, in 2018, set a self-imposed 2030 deadline to find a more eco-friendly alternative to the ABS plastic.

Manufacturing of Lego bricks occurs at several locations around the world. Moulding is done in Billund, Denmark; Nyíregyháza, Hungary; Monterrey, Mexico; and most recently in Jiaxing, China. Brick decorations and packaging are done at plants in the former three countries and in Kladno in the Czech Republic. The Lego Group estimates that in five decades it has produced 400 billion Lego blocks. Annual production of the bricks averages approximately 36 billion, or about 1140 elements per second. According to an article in BusinessWeek in 2006, Lego could also be considered the world's number-one tyre manufacturer; the factory produces about 306 million small rubber tyres a year. The claim was reiterated in 2012.

In December 2012, the BBC's More or Less radio program asked the Open University's engineering department to determine "how many Lego bricks, stacked one on top of the other, it would take for the weight to destroy the bottom brick?" Using a hydraulic testing machine, members of the department determined the average maximum force a 2×2 Lego brick can stand is 4,240 newtons. Since an average 2×2 Lego brick has a mass of 1.152 grams (0.0406 oz), according to their calculations it would take a stack of 375,000 bricks to cause the bottom brick to collapse, which represents a stack 3,591 metres (11,781 ft) in height.

Private tests have shown several thousand assembly-disassembly cycles before the bricks begin to wear out, although Lego tests show fewer cycles.

In 2018, Lego announced that it will be using bio-derived polyethylene to make its botanical elements (parts such as leaves, bushes and trees). The New York Times reported the company's footprint that year was "about a million tons of carbon dioxide each year" and that it was investing about 1 billion kroner and hiring 100 people to work on changes. The paper reported that Lego's researchers "have already experimented with around 200 alternatives." In 2020, Lego announced that it would cease packaging its products in single-use plastic bags and would instead be using recyclable paper bags. In 2021, the company said it would aim to produce its bricks without using crude oil, by using recycled polyethylene terephthalate bottles, but in 2023 it reversed this decision, having found that this did not reduce its carbon dioxide emissions.

Set themes

Since the 1950s, the Lego Group has released thousands of sets with a variety of themes, including space, pirates, trains, (European) castle, dinosaurs, undersea exploration, and wild west, as well as wholly original themes like Bionicle and Hero Factory. Some of the classic themes that continue to the present day include Lego City (a line of sets depicting city life introduced in 1973) and Lego Technic (a line aimed at emulating complex machinery, introduced in 1977).

Over the years, the company has licensed themes from numerous cartoon and film franchises and some from video games. These include Batman, Indiana Jones, Pirates of the Caribbean, Harry Potter, Star Wars, Marvel, and Minecraft. Although some of these themes, Lego Star Wars and Lego Indiana Jones, had highly successful sales, the company expressed in 2015 a desire to rely more upon their own characters and classic themes and less upon such licensed themes. Some sets include references to other themes such as a Bionicle mask in one of the Harry Potter sets. Discontinued sets may become a collectable and command value on the black market.

For the 2012 Summer Olympics in London, Lego released a special Team GB Minifigures series exclusively in the United Kingdom to mark the opening of the games. For the 2016 Summer Olympics and 2016 Summer Paralympics in Rio de Janeiro, Lego released a kit with the Olympic and Paralympic mascots Vinicius and Tom.

One of the largest commercially produced Lego sets was a minifig-scaled edition of the Star Wars Millennium Falcon. Designed by Jens Kronvold Fredericksen, it was released in 2007 and contained 5,195 pieces. It was surpassed by a 5,922-piece Taj Mahal. A redesigned Millennium Falcon retook the top spot in 2017 with 7,541 pieces. Since then, the Millennium Falcon has been superseded by the Lego Art World Map at 11,695 pieces, the Lego Titanic at 9,090 pieces, and the Lego Architect Colosseum at 9,036 pieces.

In 2022, Lego introduced its Eiffel Tower. The set consists of 10,000 parts and reaches a height of 149 cm, which makes it the tallest set and tower but the second in number of parts after the World Map.

Robotics themes

Main articles: Lego Mindstorms, Lego Mindstorms NXT, Lego Mindstorms NXT 2.0, and Lego Mindstorms EV3

The company also initiated a robotics line of toys called 'Mindstorms' in 1999, and has continued to expand and update this range ever since. The roots of the product originate from a programmable brick developed at the MIT Media Lab, and the name is taken from a paper by Seymour Papert, a computer scientist and educator who developed the educational theory of constructionism, and whose research was at times funded by the Lego Group.

The programmable Lego brick which is at the heart of these robotics sets has undergone several updates and redesigns, with the latest being called the 'EV3' brick, being sold under the name of Lego Mindstorms EV3. The set includes sensors that detect touch, light, sound and ultrasonic waves, with several others being sold separately, including an RFID reader.

The intelligent brick can be programmed using official software available for Windows and Mac computers, and is downloaded onto the brick via Bluetooth or a USB cable. There are also several unofficial programs and compatible programming languages that have been made to work with the brick, and many books have been written to support this community.

There are several robotics competitions which use the Lego robotics sets. The earliest is Botball, a national U.S. middle- and high-school competition stemming from the MIT 6.270 Lego robotics tournament. Other Lego robotics competitions include FIRST LEGO League Discover for children ages 4–6, FIRST LEGO League Explore for students ages 6–9 and FIRST Lego League Challenge for students ages 9–16 (age 9–14 in the United States, Canada, and Mexico). These programs offer real-world engineering challenges to participants. FIRST LEGO League Challenge uses LEGO-based robots to complete tasks, FIRST LEGO League Explore participants build models out of Lego elements, and FIRST LEGO League Discover participants use Duplo. In its 2019–2020 season, there were 38,609 FIRST LEGO League Challenge teams and 21,703 FIRST LEGO League Explore teams around the world. The international RoboCup Junior football competition involves extensive use of Lego Mindstorms equipment which is often pushed to its extreme limits.

The capabilities of the Mindstorms range have now been harnessed for use in Iko Creative Prosthetic System, a prosthetic limbs system designed for children. Designs for these Lego prosthetics allow everything from mechanical diggers to laser-firing spaceships to be screwed on to the end of a child's limb. Iko is the work of the Chicago-based Colombian designer Carlos Arturo Torres, and is a modular system that allows children to customise their own prosthetics with the ease of clicking together plastic bricks. Designed with Lego's Future Lab, the Danish toy company's experimental research department, and Cirec, a Colombian foundation for physical rehabilitation, the modular prosthetic incorporates myoelectric sensors that register the activity of the muscle in the stump and send a signal to control movement in the attachment. A processing unit in the body of the prosthetic contains an engine compatible with Lego Mindstorms, the company's robotics line, which lets the wearer build an extensive range of customised, programmable limbs.

In popular culture

Lego's popularity is demonstrated by its wide representation and usage in many cultural works, including books, films, and art. It has even been used in the classroom as a teaching tool. In the US, Lego Education North America is a joint venture between Pitsco, Inc. and the educational division of the Lego Group.

In 1998, Lego bricks were one of the original inductees into the National Toy Hall of Fame at The Strong in Rochester, New York.

"Lego" is commonly used as a mass noun ("some Lego") or, in American English, as a countable noun with plural "Legos", to refer to the bricks themselves, but as is common for trademarks, Lego group insists on the name being used as an adjective when referring to a product (as in "LEGO bricks").

Lego is a line of plastic construction toys manufactured by the Lego Group, a privately held company based in Billund, Denmark. Lego consists of variously colored interlocking plastic bricks made of acrylonitrile butadiene styrene that accompany an array of gears, figurines called minifigures, and various other parts. Its pieces can be assembled and connected in many ways to construct objects, including vehicles, buildings, and working robots. Anything constructed can be taken apart again, and the pieces reused to make new things.

The Lego Group began manufacturing the interlocking toy bricks in 1949. Moulding is done in Denmark, Hungary, Mexico, and China. Brick decorations and packaging are done at plants in the former three countries and in the Czech Republic. Annual production of the bricks averages approximately 36 billion, or about 1140 elements per second.

Films, games competitions, and eight Legoland amusement parks have been developed under the brand. One of Europe's biggest companies, Lego is the largest toy manufacturer in the world by sales. As of July 2015, 600 billion Lego parts had been produced.

History

The Lego Group began in the workshop of Ole Kirk Christiansen (1891–1958), a carpenter from Billund, Denmark, who began making wooden toys in 1932. In 1934, his company came to be called "Lego", derived from the Danish phrase leg godt which means "play well". In 1947, Lego expanded to begin producing plastic toys. In 1949 the business began producing, among other new products, an early version of the now familiar interlocking bricks, calling them "Automatic Binding Bricks". These bricks were based on the Kiddicraft Self-Locking Bricks, invented by Hilary Page in 1939 and patented in the United Kingdom in 1940 before being displayed at the 1947 Earl's Court Toy Fair. Lego had received a sample of the Kiddicraft bricks from the supplier of an injection-molding machine that it purchased. The bricks, originally manufactured from cellulose acetate, were a development of the traditional stackable wooden blocks of the time.

The Lego Group's motto, "only the best is good enough" (Danish: det bedste er ikke for godt, literally "the best isn't excessively good") was created in 1936. Christiansen created the motto, still used today, to encourage his employees never to skimp on quality, a value he believed in strongly. By 1951, plastic toys accounted for half of the company's output, even though the Danish trade magazine Legetøjs-Tidende ("Toy Times"), visiting the Lego factory in Billund in the early 1950s, wrote that plastic would never be able to replace traditional wooden toys. Although a common sentiment, Lego toys seem to have become a significant exception to the dislike of plastic in children's toys, due in part to the high standards set by Ole Kirk.

By 1954, Christiansen's son, Godtfred, had become the junior managing director of the Lego Group. It was his conversation with an overseas buyer that led to the idea of a toy system. Godtfred saw the immense potential in Lego bricks to become a system for creative play, but the bricks still had some problems from a technical standpoint: Their locking ability was still limited, and they were not yet versatile. In 1958, the modern brick design was developed; it took five years to find the right material for it, ABS (acrylonitrile butadiene styrene) polymer. A patent application for the modern Lego brick design was filed in Denmark on 28 January 1958 and in various other countries in the subsequent few years.

The Lego Group's Duplo product line was introduced in 1969 and is a range of blocks whose lengths measure twice the width, height, and depth of standard Lego blocks and are aimed towards younger children. In 1978, Lego produced the first minifigures, which have since become a staple in most sets.

In May 2011, Space Shuttle Endeavour mission STS-134 brought 13 Lego kits to the International Space Station, where astronauts built models to see how they would react in microgravity, as a part of the Lego Bricks in Space program. In May 2013, the largest model ever created, made of over 5 million bricks, was displayed in New York City; a one-to-one scale model of a Star Wars X-wing fighter. Other record breakers include a 34-metre (112 ft) tower and a 4 km (2.5 mi) railway.

In February 2015, marketing consulting company Brand Finance ranked Lego as the "world's most powerful brand", overtaking Ferrari.

Lego bricks have acquired a reputation for causing extreme pain when stepped on.

Design

Lego pieces of all varieties constitute a universal system. Despite variations in the design and the purposes of individual pieces over the years, each remains compatible in some way with existing pieces. Lego bricks from 1958 still interlock with those made presently, and Lego sets for young children are compatible with those made for teenagers. Six bricks of 2 × 4 studs can be combined in 915,103,765 ways.

Each piece must be manufactured to an exacting degree of precision. When two pieces are engaged, they must fit firmly, yet be easily disassembled. The machines that manufacture Lego bricks have tolerances as small as 10 micrometres.

Primary concept and development work for the toy takes place at the Billund headquarters, where the company employs approximately 120 designers. The company also has smaller design offices in the UK, Spain, Germany, and Japan which are tasked with developing products aimed specifically at their respective national markets. The average development period for a new product is around twelve months, split into three stages. The first is to identify market trends and developments, including contact by the designers directly with the market; some are stationed in toy shops close to holidays, while others interview children. The second stage is the design and development of the product based on the results of the first stage. As of September 2008 the design teams use 3D modelling software to generate CAD drawings from initial design sketches. The designs are then prototyped using an in-house stereolithography machine. These prototypes are presented to the entire project team for comment and testing by parents and children during the "validation" process. Designs may then be altered in accordance with the results from the focus groups. Virtual models of completed Lego products are built concurrently with the writing of the user instructions. Completed CAD models are also used in the wider organisation for marketing and packaging.

Lego Digital Designer is an official piece of Lego software for Mac OS X and Windows which allows users to create their own digital Lego designs. The program once allowed customers to order custom designs with a service to ship physical models from Digital Designer to consumers; the service ended in 2012.

Manufacturing

Since 1963, Lego pieces have been manufactured from acrylonitrile butadiene styrene (ABS). As of September 2008, Lego engineers use the NX CAD/CAM/CAE PLM software suite to model the elements. The software allows the parts to be optimised by way of mould flow and stress analysis. Prototype moulds are sometimes built before the design is committed to mass production. The ABS plastic is heated to 232 °C (450 °F) until it reaches a dough-like consistency. It is then injected into the moulds using forces of between 25 and 150 tonnes and takes approximately 15 seconds to cool. The moulds are permitted a tolerance of up to twenty micrometres to ensure the bricks remain connected. Human inspectors check the output of the moulds to eliminate significant variations in colour or thickness. According to the Lego Group, about eighteen bricks out of every million fail to meet the standard required.

Lego factories recycle all but about 1 percent of their plastic waste from the manufacturing process. If the plastic cannot be re-used in Lego bricks, it is processed and sold on to industries that can make use of it. Lego, in 2018, set a self-imposed 2030 deadline to find a more eco-friendly alternative to the ABS plastic.

Manufacturing of Lego bricks occurs at several locations around the world. Moulding is done in Billund, Denmark; Nyíregyháza, Hungary; Monterrey, Mexico; and most recently in Jiaxing, China. Brick decorations and packaging are done at plants in the former three countries and in Kladno in the Czech Republic. The Lego Group estimates that in five decades it has produced 400 billion Lego blocks. Annual production of the bricks averages approximately 36 billion, or about 1140 elements per second. According to an article in BusinessWeek in 2006, Lego could also be considered the world's number-one tyre manufacturer; the factory produces about 306 million small rubber tyres a year. The claim was reiterated in 2012.

In December 2012, the BBC's More or Less radio program asked the Open University's engineering department to determine "how many Lego bricks, stacked one on top of the other, it would take for the weight to destroy the bottom brick?" Using a hydraulic testing machine, members of the department determined the average maximum force a 2×2 Lego brick can stand is 4,240 newtons. Since an average 2×2 Lego brick has a mass of 1.152 grams (0.0406 oz), according to their calculations it would take a stack of 375,000 bricks to cause the bottom brick to collapse, which represents a stack 3,591 metres (11,781 ft) in height.

Private tests have shown several thousand assembly-disassembly cycles before the bricks begin to wear out, although Lego tests show fewer cycles.

In 2018, Lego announced that it will be using bio-derived polyethylene to make its botanical elements (parts such as leaves, bushes and trees). The New York Times reported the company's footprint that year was "about a million tons of carbon dioxide each year" and that it was investing about 1 billion kroner and hiring 100 people to work on changes. The paper reported that Lego's researchers "have already experimented with around 200 alternatives." In 2020, Lego announced that it would cease packaging its products in single-use plastic bags and would instead be using recyclable paper bags. In 2021, the company said it would aim to produce its bricks without using crude oil, by using recycled polyethylene terephthalate bottles, but in 2023 it reversed this decision, having found that this did not reduce its carbon dioxide emissions.

Set themes

Since the 1950s, the Lego Group has released thousands of sets with a variety of themes, including space, pirates, trains, (European) castle, dinosaurs, undersea exploration, and wild west, as well as wholly original themes like Bionicle and Hero Factory. Some of the classic themes that continue to the present day include Lego City (a line of sets depicting city life introduced in 1973) and Lego Technic (a line aimed at emulating complex machinery, introduced in 1977).

Over the years, the company has licensed themes from numerous cartoon and film franchises and some from video games. These include Batman, Indiana Jones, Pirates of the Caribbean, Harry Potter, Star Wars, Marvel, and Minecraft. Although some of these themes, Lego Star Wars and Lego Indiana Jones, had highly successful sales, the company expressed in 2015 a desire to rely more upon their own characters and classic themes and less upon such licensed themes. Some sets include references to other themes such as a Bionicle mask in one of the Harry Potter sets. Discontinued sets may become a collectable and command value on the black market.

For the 2012 Summer Olympics in London, Lego released a special Team GB Minifigures series exclusively in the United Kingdom to mark the opening of the games. For the 2016 Summer Olympics and 2016 Summer Paralympics in Rio de Janeiro, Lego released a kit with the Olympic and Paralympic mascots Vinicius and Tom.

One of the largest commercially produced Lego sets was a minifig-scaled edition of the Star Wars Millennium Falcon. Designed by Jens Kronvold Fredericksen, it was released in 2007 and contained 5,195 pieces. It was surpassed by a 5,922-piece Taj Mahal. A redesigned Millennium Falcon retook the top spot in 2017 with 7,541 pieces. Since then, the Millennium Falcon has been superseded by the Lego Art World Map at 11,695 pieces, the Lego Titanic at 9,090 pieces, and the Lego Architect Colosseum at 9,036 pieces.

In 2022, Lego introduced its Eiffel Tower. The set consists of 10,000 parts and reaches a height of 149 cm, which makes it the tallest set and tower but the second in number of parts after the World Map.

Robotics themes

Main articles: Lego Mindstorms, Lego Mindstorms NXT, Lego Mindstorms NXT 2.0, and Lego Mindstorms EV3

The company also initiated a robotics line of toys called 'Mindstorms' in 1999, and has continued to expand and update this range ever since. The roots of the product originate from a programmable brick developed at the MIT Media Lab, and the name is taken from a paper by Seymour Papert, a computer scientist and educator who developed the educational theory of constructionism, and whose research was at times funded by the Lego Group.

The programmable Lego brick which is at the heart of these robotics sets has undergone several updates and redesigns, with the latest being called the 'EV3' brick, being sold under the name of Lego Mindstorms EV3. The set includes sensors that detect touch, light, sound and ultrasonic waves, with several others being sold separately, including an RFID reader.

The intelligent brick can be programmed using official software available for Windows and Mac computers, and is downloaded onto the brick via Bluetooth or a USB cable. There are also several unofficial programs and compatible programming languages that have been made to work with the brick, and many books have been written to support this community.

There are several robotics competitions which use the Lego robotics sets. The earliest is Botball, a national U.S. middle- and high-school competition stemming from the MIT 6.270 Lego robotics tournament. Other Lego robotics competitions include FIRST LEGO League Discover for children ages 4–6, FIRST LEGO League Explore for students ages 6–9 and FIRST Lego League Challenge for students ages 9–16 (age 9–14 in the United States, Canada, and Mexico). These programs offer real-world engineering challenges to participants. FIRST LEGO League Challenge uses LEGO-based robots to complete tasks, FIRST LEGO League Explore participants build models out of Lego elements, and FIRST LEGO League Discover participants use Duplo. In its 2019–2020 season, there were 38,609 FIRST LEGO League Challenge teams and 21,703 FIRST LEGO League Explore teams around the world. The international RoboCup Junior football competition involves extensive use of Lego Mindstorms equipment which is often pushed to its extreme limits.

The capabilities of the Mindstorms range have now been harnessed for use in Iko Creative Prosthetic System, a prosthetic limbs system designed for children. Designs for these Lego prosthetics allow everything from mechanical diggers to laser-firing spaceships to be screwed on to the end of a child's limb. Iko is the work of the Chicago-based Colombian designer Carlos Arturo Torres, and is a modular system that allows children to customise their own prosthetics with the ease of clicking together plastic bricks. Designed with Lego's Future Lab, the Danish toy company's experimental research department, and Cirec, a Colombian foundation for physical rehabilitation, the modular prosthetic incorporates myoelectric sensors that register the activity of the muscle in the stump and send a signal to control movement in the attachment. A processing unit in the body of the prosthetic contains an engine compatible with Lego Mindstorms, the company's robotics line, which lets the wearer build an extensive range of customised, programmable limbs.

In popular culture

Lego's popularity is demonstrated by its wide representation and usage in many cultural works, including books, films, and art. It has even been used in the classroom as a teaching tool. In the US, Lego Education North America is a joint venture between Pitsco, Inc. and the educational division of the Lego Group.

In 1998, Lego bricks were one of the original inductees into the National Toy Hall of Fame at The Strong in Rochester, New York.

"Lego" is commonly used as a mass noun ("some Lego") or, in American English, as a countable noun with plural "Legos", to refer to the bricks themselves, but as is common for trademarks, Lego group insists on the name being used as an adjective when referring to a product (as in "LEGO bricks").

Oiii! =D

Hoje eu fui ao Méier comprar alguns esmaltenhos para as troquinhas que vou fazer! Acabei achando o Glacial e os Mattefluor e tive que comprá-los! Mas eu ganhei meu primeiro sorteio do mundo esmaltístico justamente HOJE, o da comunidade "Que cor eu vou?" do orkut! Ganhei 1 mini-kit que vem com 2 da nova coleção, mas não sei quais são! =( Comprei todos para Teka, já que só poderei comprar os meus depois de saber quais ganhei. Comprei sem saber se ela queria e agora corro o risco de ficar com repetidos aqui, mas tudo bem! Eu ia querer a coleção completa de qualquer forma mesmo! hauahauahau Posso dar os 2 repetidos ou sortear no blog né? ;) R$2,50 cada! Facadinha hein? =x

Para mim, acabei finalmente comprando 2 filhotes que eu queria faz tempo: Azul Royal (Colorama) e Azul Jeans (Impala). Será que peguei a "doença" da Milla (paixonite por azuis)? =P Também comprei o Balé Clássico (Colorama) para fazer uma composição com outro esmalte e o Glacial queridinho! Acabei me rendendo ao potinho de acetona que é muito prático! Não comprava porque sou mão de vaca e não queria gastar R$5,90 nisso! Toda vez que eu fazia as unhas ficava me amaldiçoando por não tê-lo comprado ainda, principalmente porque uso aquela acetona de 500ml da 5Cinco e quando vou molhar o algodão, é uma tristeza! Então, resolvi abrir a mão! hehehe A luvinha comprei para testar. Queria a dos pés, principalmente! Mas vi numa loja e deixei para comprar em outra e só tinha a das mãos! Vou testar, gostando compro dos pés depois! =D Comprei mais um roxinho da Colorama que o meu estava no fim e 3 modelos de lixinhas diferentes! Eu era LOUCA por essas lixinhas! Achei e logo trouxe uma de cada modelo preferido! hauahaua

O resto é para as trokinhas! Deixei tudo indicado com notinhas! =)

=***

Hta.

*-* Dá uma visitadinha, vai:

www.nossovicio.com

My studio has been so busy lately with casting, machining and 3D printing that I haven't had much time to update the build thread of this project.

Let me update you all on the progress of the Lunar Module:

I've been slowly chipping away on all the rivet detailing, as well as cleanup. Here you can see the hatch aperture being milled to the correct depth just before the forward hull was moulded for a second time- as previously stated, this is so that I can capture all the texture and detail without the fragility of the techniques I used to get that effect.

The photo featured of the silicone mould (in pale green) is the mould directly after it had cured, so before any cleanup to remove debris left inside.

Since the latest cast from the new mould is just one of the prototypes, I wanted to see how the model looks with paint.

I used Halfords matt black spray paint, followed up with a custom mixture of Tamiya XF15 and XF20 (Flat Flesh and Medium Grey), then Alclad II Chrome for the metallic areas.

I then painted the rivets and tape detail with Tamiya X11 (Silver), before attaching gold thermal blanket using 3M 2mm double sided tape. I discovered that gluing the thermal blanket doesn't work at all, since any solvents dissolve the gold coating.

The descent stage (DS) has been laser cut from 3mm Perspex according to the dimensions laid out in my CAD model- 1mm half round styrene strips have then been added to accurately replicate the ribs and stringers. I chose to use half round rather than a more accurate square profile for ease of moulding.

The Sketchup model I've been working on concurrently with the physical build will be available to purchase as SKP and STL files when it's complete- as you can see, I have done my best to closely copy the LM interior according to reference photographs and NASA/Grumman documentation.

If you'd like to stay up to date with this project and many others we're working on, consider following our Facebook and Instagram feeds @archiveandfuture.

Thank you all for your interest so far in this build!

The BMW 8 Series (chassis code: E31) is a Grand Tourer built by BMW from 1989 to 1999 powered by either a V8 or V12 engine. While it did supplant the original E24 based 6 Series in 1991, a common misconception is that the 8 Series was developed as a successor. However, it was actually an entirely new class aimed at a different market, with a substantially higher price and better performance than the 6 series. It was BMW's flagship car and had an electronically limited top speed of 155 mph (250 km/h).

History of development

BMW E31 rear styling

Design of the 8 Series began in 1984, with the final design phase and production development (starting) in 1986. The 8 Series debuted at the Frankfurt Motor Show (IAA) in early September 1989. The 8 Series was designed to move beyond the market of the original 6 Series. The 8 Series however had substantially improved performance, as well as a far higher purchase price.

Over 1.5 billion Deutschemark was spent on total development (2008 USD nearly $1 billion). BMW used CAD tools, still unusual at the time, to design the car's all-new body. Combined with wind tunnel testing, the resulting car had a drag coefficient of 0.29, a major improvement from the previous BMW M6/635CSi's 0.39.

The 8 Series supercar offered the first V-12 engine mated to a 6-speed manual gearbox on a road car. It was also one of the first vehicles to be fitted with an electronic "drive-by-wire" throttle. The 8 Series was one of BMW's first cars, together with the Z1, to use a multi-link rear axle.

While CAD modeling allowed the car's unibody to be 8 lb (3 kg) lighter than that of its predecessor, the car was significantly heavier when completed due to the large engine and added luxury items—a source of criticism from those who wanted BMW to concentrate on the driving experience. Some of the car's weight may have been due to its pillarless "hardtop" body style, which lacked a "B" post. This body style, originating in the United States in the late 1940s, was abandoned by Detroit in the late 1970s.

Sales of the 8 Series were affected by the global recession of the early 1990s, the Persian Gulf War, and energy price spikes. BMW pulled the 8 Series from the North American market in 1997, having sold only 7,232 cars over seven years. BMW continued production for Europe until 1999.

850i

BMW 850i/Ci M70 V12 engine

This was the first model launched in 1990 with the 5 litre M70B50 V12 engine producing 300 PS (221 kW; 296 hp). It was available with either a 4-speed automatic or a 6-speed manual gearbox.

[Text taken from Wikipedia]

This Lego miniland-scale BMW 850i Coupe has been created for Flickr LUGNuts' 85th Build Challenge, - "Like, Totally 80s", - all about cars created during the decade of the 1980s. The BMW 850i just slips in right at the end, launching late in 1989.

Project for school, not done yet but gives an idea of what it was once

CAD Model, we continue working on it, still not finished. More info at www.bottpower.com

felt tip on paper from wireframe CAD model, prismacolor pencil, 11 x 17, 2018

Harta pega, pero vamos que van saliendo cosas lindas :D

Fotos por Danilo Urbina y Nicole Suárez (yo :B)

Maquillaje por Nicole Suárez

Pd: Gracias a cada modelo por la disposición.

In the last week or so, I have tweaked my CAD models using measurements taken with my new calipers. The models are now available to view (but not purchase) on my Shapeways account:

www.shapeways.com/designer/technoandrew

If you click on the parts you can find 360° spinning images.

I have ordered a number of prototypes to test their effectiveness. I haven't made them available to buy, as I have no idea if these are viable yet. Unless one of you really wants to try some, in which case I could make them available, but I was going to wait until I've done a few iterations.

As well as some actual wheels, I've also ordered a test piece I designed, for assessing the optimum dimensions of the cross axle hole.

Will be posting an update with pictures when they arrive.

As prints do EP estão prontas! São 50, 25 de cada modelo. Todas assinadas e numeradas, impressas no papel Aspen 250g. Ele tem um acabamento perolizado, o que deixa as cores com um aspecto metalizado.

Teremos 10 na Japonique, 10 na HQMix e 30 nas compras pela internet. Por isso, quem quiser garantir a sua, seja rápido!

Onde comprar:

octopusmilk.com/2357801/Onde-comprar-o-EP

Print do sr Magentaking:

www.flickr.com/photos/magentaking/6441554841/in/contacts/

felt tip pen on CAD model on paper, 11 x 17, 2007

I normally design my models using pictures and a quick sketch or two before I start putting bricks together. However, I'm mostly far away from my collection at the moment and decided to design this one using a computer, before building the model in actual bricks last weekend.

I did a fair bit of fine-tuning in the process relative to the original design. The real Panda has a distinctive curve in the top of the side windows. Even though my CAD model was more-or-less the proper height, it didn't look right. I increased the height of the roof on the brick-built model to emphasise the curve.

Animation of a 3D CAD model with various parts removed or transparent to show the gear motion.

It’s been a really long time since I’ve built anything from LEGO and what better way to celebrate my triumphant return than by conquering the car that’s haunted me for well over a decade. I’ve been trying to build a Lotus Exige for a very long time now, in various scales and techniques, but it always ended in failure. Finally I have captured it in a way that I am ~mostly~ satisfied with.

This is my first ever attempt at building something in “speed champions” scale and it introduced me into a lot of new LEGO parts that I have never utilized before. I definitely see the appeal and I’m keen to try other models in this scale as long as the inspiration keeps flowing.

I started with just the Exige model, but halfway through the design I found an easy opportunity to include the roadster "Elise" model as well which features some minute differences including: A removable roof, fog lamps, rear vented deck, thinner side intakes, and different exhaust. Both cars met my expectations well enough to dig me out of the rutt I've been stuck in for so long. I think I personally prefer the Exige model, especially the way it looks from a bird's eye view which captures the pinched waistline that the car is iconic for.

Let me know what you think! Depending on how I can fudge the 3D CAD model, I MIGHT be able to get some instructions up on rebrickable at a later date.

Also, I have started posting my LEGO cars on Instagram now along with some of my real life car stuff, and I have almost no LEGO followers yet, so I would really appreciate if anyone wants to share my account! Thank you!

www.instagram.com/krud_kars/

See the full build log here.

It’s been a really long time since I’ve built anything from LEGO and what better way to celebrate my triumphant return than by conquering the car that’s haunted me for well over a decade. I’ve been trying to build a Lotus Exige for a very long time now, in various scales and techniques, but it always ended in failure. Finally I have captured it in a way that I am ~mostly~ satisfied with.

This is my first ever attempt at building something in “speed champions” scale and it introduced me into a lot of new LEGO parts that I have never utilized before. I definitely see the appeal and I’m keen to try other models in this scale as long as the inspiration keeps flowing.

I started with just the Exige model, but halfway through the design I found an easy opportunity to include the roadster "Elise" model as well which features some minute differences including: A removable roof, fog lamps, rear vented deck, thinner side intakes, and different exhaust. Both cars met my expectations well enough to dig me out of the rutt I've been stuck in for so long. I think I personally prefer the Exige model, especially the way it looks from a bird's eye view which captures the pinched waistline that the car is iconic for.

Let me know what you think! Depending on how I can fudge the 3D CAD model, I MIGHT be able to get some instructions up on rebrickable at a later date.

Also, I have started posting my LEGO cars on Instagram now along with some of my real life car stuff, and I have almost no LEGO followers yet, so I would really appreciate if anyone wants to share my account! Thank you!

www.instagram.com/krud_kars/

The BMW 8 Series (chassis code: E31) is a Grand Tourer built by BMW from 1989 to 1999 powered by either a V8 or V12 engine. While it did supplant the original E24 based 6 Series in 1991, a common misconception is that the 8 Series was developed as a successor. However, it was actually an entirely new class aimed at a different market, with a substantially higher price and better performance than the 6 series. It was BMW's flagship car and had an electronically limited top speed of 155 mph (250 km/h).

History of development

BMW E31 rear styling

Design of the 8 Series began in 1984, with the final design phase and production development (starting) in 1986. The 8 Series debuted at the Frankfurt Motor Show (IAA) in early September 1989. The 8 Series was designed to move beyond the market of the original 6 Series. The 8 Series however had substantially improved performance, as well as a far higher purchase price.

Over 1.5 billion Deutschemark was spent on total development (2008 USD nearly $1 billion). BMW used CAD tools, still unusual at the time, to design the car's all-new body. Combined with wind tunnel testing, the resulting car had a drag coefficient of 0.29, a major improvement from the previous BMW M6/635CSi's 0.39.

The 8 Series supercar offered the first V-12 engine mated to a 6-speed manual gearbox on a road car. It was also one of the first vehicles to be fitted with an electronic "drive-by-wire" throttle. The 8 Series was one of BMW's first cars, together with the Z1, to use a multi-link rear axle.

While CAD modeling allowed the car's unibody to be 8 lb (3 kg) lighter than that of its predecessor, the car was significantly heavier when completed due to the large engine and added luxury items—a source of criticism from those who wanted BMW to concentrate on the driving experience. Some of the car's weight may have been due to its pillarless "hardtop" body style, which lacked a "B" post. This body style, originating in the United States in the late 1940s, was abandoned by Detroit in the late 1970s.

Sales of the 8 Series were affected by the global recession of the early 1990s, the Persian Gulf War, and energy price spikes. BMW pulled the 8 Series from the North American market in 1997, having sold only 7,232 cars over seven years. BMW continued production for Europe until 1999.

850i

BMW 850i/Ci M70 V12 engine

This was the first model launched in 1990 with the 5 litre M70B50 V12 engine producing 300 PS (221 kW; 296 hp). It was available with either a 4-speed automatic or a 6-speed manual gearbox.

[Text taken from Wikipedia]

This Lego miniland-scale BMW 850i Coupe has been created for Flickr LUGNuts' 85th Build Challenge, - "Like, Totally 80s", - all about cars created during the decade of the 1980s. The BMW 850i just slips in right at the end, launching late in 1989.

The BMW 8 Series (chassis code: E31) is a Grand Tourer built by BMW from 1989 to 1999 powered by either a V8 or V12 engine. While it did supplant the original E24 based 6 Series in 1991, a common misconception is that the 8 Series was developed as a successor. However, it was actually an entirely new class aimed at a different market, with a substantially higher price and better performance than the 6 series. It was BMW's flagship car and had an electronically limited top speed of 155 mph (250 km/h).

History of development

BMW E31 rear styling

Design of the 8 Series began in 1984, with the final design phase and production development (starting) in 1986. The 8 Series debuted at the Frankfurt Motor Show (IAA) in early September 1989. The 8 Series was designed to move beyond the market of the original 6 Series. The 8 Series however had substantially improved performance, as well as a far higher purchase price.

Over 1.5 billion Deutschemark was spent on total development (2008 USD nearly $1 billion). BMW used CAD tools, still unusual at the time, to design the car's all-new body. Combined with wind tunnel testing, the resulting car had a drag coefficient of 0.29, a major improvement from the previous BMW M6/635CSi's 0.39.

The 8 Series supercar offered the first V-12 engine mated to a 6-speed manual gearbox on a road car. It was also one of the first vehicles to be fitted with an electronic "drive-by-wire" throttle. The 8 Series was one of BMW's first cars, together with the Z1, to use a multi-link rear axle.

While CAD modeling allowed the car's unibody to be 8 lb (3 kg) lighter than that of its predecessor, the car was significantly heavier when completed due to the large engine and added luxury items—a source of criticism from those who wanted BMW to concentrate on the driving experience. Some of the car's weight may have been due to its pillarless "hardtop" body style, which lacked a "B" post. This body style, originating in the United States in the late 1940s, was abandoned by Detroit in the late 1970s.

Sales of the 8 Series were affected by the global recession of the early 1990s, the Persian Gulf War, and energy price spikes. BMW pulled the 8 Series from the North American market in 1997, having sold only 7,232 cars over seven years. BMW continued production for Europe until 1999.

850i

BMW 850i/Ci M70 V12 engine

This was the first model launched in 1990 with the 5 litre M70B50 V12 engine producing 300 PS (221 kW; 296 hp). It was available with either a 4-speed automatic or a 6-speed manual gearbox.

[Text taken from Wikipedia]

This Lego miniland-scale BMW 850i Coupe has been created for Flickr LUGNuts' 85th Build Challenge, - "Like, Totally 80s", - all about cars created during the decade of the 1980s. The BMW 850i just slips in right at the end, launching late in 1989.

It’s been a really long time since I’ve built anything from LEGO and what better way to celebrate my triumphant return than by conquering the car that’s haunted me for well over a decade. I’ve been trying to build a Lotus Exige for a very long time now, in various scales and techniques, but it always ended in failure. Finally I have captured it in a way that I am ~mostly~ satisfied with.

This is my first ever attempt at building something in “speed champions” scale and it introduced me into a lot of new LEGO parts that I have never utilized before. I definitely see the appeal and I’m keen to try other models in this scale as long as the inspiration keeps flowing.

I started with just the Exige model, but halfway through the design I found an easy opportunity to include the roadster "Elise" model as well which features some minute differences including: A removable roof, fog lamps, rear vented deck, thinner side intakes, and different exhaust. Both cars met my expectations well enough to dig me out of the rutt I've been stuck in for so long. I think I personally prefer the Exige model, especially the way it looks from a bird's eye view which captures the pinched waistline that the car is iconic for.

Let me know what you think! Depending on how I can fudge the 3D CAD model, I MIGHT be able to get some instructions up on rebrickable at a later date.

Also, I have started posting my LEGO cars on Instagram now along with some of my real life car stuff, and I have almost no LEGO followers yet, so I would really appreciate if anyone wants to share my account! Thank you!

www.instagram.com/krud_kars/

The images you see here were all used at some stage on one of my own 3D CAD models. I made them all myself of course, and you are welcome to take whatever you like. I am a very "messy" modeler myself, and I model in order to get renderings, not necessarily perfectly crafted models. My pictures reflect that as well, and some may need editing for your purposes first. If some haven't quite got the right colour for your purpose, you know the trick, I presume: Photoshop, "Replace Colour" function.

All the best with your models.

Project to build a LEGO model of Rainbow Dash.

Progress has been steady over the last few months. Her wings are now completed, as are the internal structure of her torso, legs and tail. Only her neck, head and mane are left to design.

And I now have a target date to work towards! LEGO Dash will be appearing at 'Bricktastic' LEGO show in Manchester on the first weekend of July this year! So I'll be kept busy for the next 10 weeks or so getting her done.

It started innocently enough - it always does. The little earth-balls with arms and legs were some corporate services promotion - central part number allocation, CAD model sourcing or medical benefits help- something legitimate you might care about. They, or HR, probably put them on everyone's desk early in the morning, and some obvious jokes were made out of them. Both Megatest and Teradyne had given out the foam earth balls - no arms or legs, just our name stamped on - at trade shows and college hiring events in the preceding years.

Teradyne closed the former Megatest office at the end of 2005, with something like 6 months notice to everyone who was losing their job. Down here at the logic test end we'd popped out 4 products in 6 years, shipping for 2 different platforms and developing for one more, something we felt pretty darn good about. I was still doing productive work in December, but many people were gone, and it was getting a little spooky.

And then, one day, these balls started appearing along one of the permanent cube walls. Pretty soon there were a bunch of them, and each person leaving added theirs to the set. There were dozens of them, and they were soon referred to as "employee souls". Cosmic. With the usual hands and feet exchanged, something stabbed through the ball, faces made from map pins and all the rest. Mine is the one second from the right, with an airplane weapon safety pin and flag. Pin stuck right through the middle, of course. In the distance, on the left, you can see someone has theirs rising out of a pencil box with a CD serving as wings or a halo... As collective art, its pretty cool. As collective art made by nerds in silicon valley, its worth remembering. It was a good bunch of people.

(Granted, Megatest had set a pretty high standard for this sort of stuff - somewere is a photo of the miniature golf course (windmill included) that was put up in place of the whole software department's cube farm in the happy years before, oh, 1993 when I joined. Looked like 80s. I'm sure there are other stories...)

IMG_170

So I was looking around on ldraw.org today and noticed someone has finally posted that goofy wing plate piece - way back in September even.

When this CAD model started, that part and the side engine part didn't exist. I just wanted to say thanks to all those guys out there that author parts. Without you, I'd have no way to rebuild my MOCs.

Rendered from a Solidworks 3D CAD model.

Eu tirei essas fotos hj,

eee, é bem legal que a marca Favano Couture me contratou pra fazer essas fotos, só que o mais legal, é que esses tenis da Vans, só tem um de cada modelo... A Favano Couture contratou um artista Plástico pra customizar os tenis... e ficou animal...

bom é isso ae...

BEIJAO PRA VCS

This time with the steering gear on the correct side - thanks Doug!

Lego is a line of plastic construction toys manufactured by the Lego Group, a privately held company based in Billund, Denmark. Lego consists of variously colored interlocking plastic bricks made of acrylonitrile butadiene styrene that accompany an array of gears, figurines called minifigures, and various other parts. Its pieces can be assembled and connected in many ways to construct objects, including vehicles, buildings, and working robots. Anything constructed can be taken apart again, and the pieces reused to make new things.

The Lego Group began manufacturing the interlocking toy bricks in 1949. Moulding is done in Denmark, Hungary, Mexico, and China. Brick decorations and packaging are done at plants in the former three countries and in the Czech Republic. Annual production of the bricks averages approximately 36 billion, or about 1140 elements per second.

Films, games competitions, and eight Legoland amusement parks have been developed under the brand. One of Europe's biggest companies, Lego is the largest toy manufacturer in the world by sales. As of July 2015, 600 billion Lego parts had been produced.

History

The Lego Group began in the workshop of Ole Kirk Christiansen (1891–1958), a carpenter from Billund, Denmark, who began making wooden toys in 1932. In 1934, his company came to be called "Lego", derived from the Danish phrase leg godt which means "play well". In 1947, Lego expanded to begin producing plastic toys. In 1949 the business began producing, among other new products, an early version of the now familiar interlocking bricks, calling them "Automatic Binding Bricks". These bricks were based on the Kiddicraft Self-Locking Bricks, invented by Hilary Page in 1939 and patented in the United Kingdom in 1940 before being displayed at the 1947 Earl's Court Toy Fair. Lego had received a sample of the Kiddicraft bricks from the supplier of an injection-molding machine that it purchased. The bricks, originally manufactured from cellulose acetate, were a development of the traditional stackable wooden blocks of the time.

The Lego Group's motto, "only the best is good enough" (Danish: det bedste er ikke for godt, literally "the best isn't excessively good") was created in 1936. Christiansen created the motto, still used today, to encourage his employees never to skimp on quality, a value he believed in strongly. By 1951, plastic toys accounted for half of the company's output, even though the Danish trade magazine Legetøjs-Tidende ("Toy Times"), visiting the Lego factory in Billund in the early 1950s, wrote that plastic would never be able to replace traditional wooden toys. Although a common sentiment, Lego toys seem to have become a significant exception to the dislike of plastic in children's toys, due in part to the high standards set by Ole Kirk.

By 1954, Christiansen's son, Godtfred, had become the junior managing director of the Lego Group. It was his conversation with an overseas buyer that led to the idea of a toy system. Godtfred saw the immense potential in Lego bricks to become a system for creative play, but the bricks still had some problems from a technical standpoint: Their locking ability was still limited, and they were not yet versatile. In 1958, the modern brick design was developed; it took five years to find the right material for it, ABS (acrylonitrile butadiene styrene) polymer. A patent application for the modern Lego brick design was filed in Denmark on 28 January 1958 and in various other countries in the subsequent few years.

The Lego Group's Duplo product line was introduced in 1969 and is a range of blocks whose lengths measure twice the width, height, and depth of standard Lego blocks and are aimed towards younger children. In 1978, Lego produced the first minifigures, which have since become a staple in most sets.

In May 2011, Space Shuttle Endeavour mission STS-134 brought 13 Lego kits to the International Space Station, where astronauts built models to see how they would react in microgravity, as a part of the Lego Bricks in Space program. In May 2013, the largest model ever created, made of over 5 million bricks, was displayed in New York City; a one-to-one scale model of a Star Wars X-wing fighter. Other record breakers include a 34-metre (112 ft) tower and a 4 km (2.5 mi) railway.

In February 2015, marketing consulting company Brand Finance ranked Lego as the "world's most powerful brand", overtaking Ferrari.

Lego bricks have acquired a reputation for causing extreme pain when stepped on.

Design

Lego pieces of all varieties constitute a universal system. Despite variations in the design and the purposes of individual pieces over the years, each remains compatible in some way with existing pieces. Lego bricks from 1958 still interlock with those made presently, and Lego sets for young children are compatible with those made for teenagers. Six bricks of 2 × 4 studs can be combined in 915,103,765 ways.

Each piece must be manufactured to an exacting degree of precision. When two pieces are engaged, they must fit firmly, yet be easily disassembled. The machines that manufacture Lego bricks have tolerances as small as 10 micrometres.

Primary concept and development work for the toy takes place at the Billund headquarters, where the company employs approximately 120 designers. The company also has smaller design offices in the UK, Spain, Germany, and Japan which are tasked with developing products aimed specifically at their respective national markets. The average development period for a new product is around twelve months, split into three stages. The first is to identify market trends and developments, including contact by the designers directly with the market; some are stationed in toy shops close to holidays, while others interview children. The second stage is the design and development of the product based on the results of the first stage. As of September 2008 the design teams use 3D modelling software to generate CAD drawings from initial design sketches. The designs are then prototyped using an in-house stereolithography machine. These prototypes are presented to the entire project team for comment and testing by parents and children during the "validation" process. Designs may then be altered in accordance with the results from the focus groups. Virtual models of completed Lego products are built concurrently with the writing of the user instructions. Completed CAD models are also used in the wider organisation for marketing and packaging.

Lego Digital Designer is an official piece of Lego software for Mac OS X and Windows which allows users to create their own digital Lego designs. The program once allowed customers to order custom designs with a service to ship physical models from Digital Designer to consumers; the service ended in 2012.

Manufacturing

Since 1963, Lego pieces have been manufactured from acrylonitrile butadiene styrene (ABS). As of September 2008, Lego engineers use the NX CAD/CAM/CAE PLM software suite to model the elements. The software allows the parts to be optimised by way of mould flow and stress analysis. Prototype moulds are sometimes built before the design is committed to mass production. The ABS plastic is heated to 232 °C (450 °F) until it reaches a dough-like consistency. It is then injected into the moulds using forces of between 25 and 150 tonnes and takes approximately 15 seconds to cool. The moulds are permitted a tolerance of up to twenty micrometres to ensure the bricks remain connected. Human inspectors check the output of the moulds to eliminate significant variations in colour or thickness. According to the Lego Group, about eighteen bricks out of every million fail to meet the standard required.

Lego factories recycle all but about 1 percent of their plastic waste from the manufacturing process. If the plastic cannot be re-used in Lego bricks, it is processed and sold on to industries that can make use of it. Lego, in 2018, set a self-imposed 2030 deadline to find a more eco-friendly alternative to the ABS plastic.

Manufacturing of Lego bricks occurs at several locations around the world. Moulding is done in Billund, Denmark; Nyíregyháza, Hungary; Monterrey, Mexico; and most recently in Jiaxing, China. Brick decorations and packaging are done at plants in the former three countries and in Kladno in the Czech Republic. The Lego Group estimates that in five decades it has produced 400 billion Lego blocks. Annual production of the bricks averages approximately 36 billion, or about 1140 elements per second. According to an article in BusinessWeek in 2006, Lego could also be considered the world's number-one tyre manufacturer; the factory produces about 306 million small rubber tyres a year. The claim was reiterated in 2012.

In December 2012, the BBC's More or Less radio program asked the Open University's engineering department to determine "how many Lego bricks, stacked one on top of the other, it would take for the weight to destroy the bottom brick?" Using a hydraulic testing machine, members of the department determined the average maximum force a 2×2 Lego brick can stand is 4,240 newtons. Since an average 2×2 Lego brick has a mass of 1.152 grams (0.0406 oz), according to their calculations it would take a stack of 375,000 bricks to cause the bottom brick to collapse, which represents a stack 3,591 metres (11,781 ft) in height.

Private tests have shown several thousand assembly-disassembly cycles before the bricks begin to wear out, although Lego tests show fewer cycles.

In 2018, Lego announced that it will be using bio-derived polyethylene to make its botanical elements (parts such as leaves, bushes and trees). The New York Times reported the company's footprint that year was "about a million tons of carbon dioxide each year" and that it was investing about 1 billion kroner and hiring 100 people to work on changes. The paper reported that Lego's researchers "have already experimented with around 200 alternatives." In 2020, Lego announced that it would cease packaging its products in single-use plastic bags and would instead be using recyclable paper bags. In 2021, the company said it would aim to produce its bricks without using crude oil, by using recycled polyethylene terephthalate bottles, but in 2023 it reversed this decision, having found that this did not reduce its carbon dioxide emissions.

Set themes

Since the 1950s, the Lego Group has released thousands of sets with a variety of themes, including space, pirates, trains, (European) castle, dinosaurs, undersea exploration, and wild west, as well as wholly original themes like Bionicle and Hero Factory. Some of the classic themes that continue to the present day include Lego City (a line of sets depicting city life introduced in 1973) and Lego Technic (a line aimed at emulating complex machinery, introduced in 1977).

Over the years, the company has licensed themes from numerous cartoon and film franchises and some from video games. These include Batman, Indiana Jones, Pirates of the Caribbean, Harry Potter, Star Wars, Marvel, and Minecraft. Although some of these themes, Lego Star Wars and Lego Indiana Jones, had highly successful sales, the company expressed in 2015 a desire to rely more upon their own characters and classic themes and less upon such licensed themes. Some sets include references to other themes such as a Bionicle mask in one of the Harry Potter sets. Discontinued sets may become a collectable and command value on the black market.

For the 2012 Summer Olympics in London, Lego released a special Team GB Minifigures series exclusively in the United Kingdom to mark the opening of the games. For the 2016 Summer Olympics and 2016 Summer Paralympics in Rio de Janeiro, Lego released a kit with the Olympic and Paralympic mascots Vinicius and Tom.

One of the largest commercially produced Lego sets was a minifig-scaled edition of the Star Wars Millennium Falcon. Designed by Jens Kronvold Fredericksen, it was released in 2007 and contained 5,195 pieces. It was surpassed by a 5,922-piece Taj Mahal. A redesigned Millennium Falcon retook the top spot in 2017 with 7,541 pieces. Since then, the Millennium Falcon has been superseded by the Lego Art World Map at 11,695 pieces, the Lego Titanic at 9,090 pieces, and the Lego Architect Colosseum at 9,036 pieces.

In 2022, Lego introduced its Eiffel Tower. The set consists of 10,000 parts and reaches a height of 149 cm, which makes it the tallest set and tower but the second in number of parts after the World Map.

Robotics themes

Main articles: Lego Mindstorms, Lego Mindstorms NXT, Lego Mindstorms NXT 2.0, and Lego Mindstorms EV3

The company also initiated a robotics line of toys called 'Mindstorms' in 1999, and has continued to expand and update this range ever since. The roots of the product originate from a programmable brick developed at the MIT Media Lab, and the name is taken from a paper by Seymour Papert, a computer scientist and educator who developed the educational theory of constructionism, and whose research was at times funded by the Lego Group.

The programmable Lego brick which is at the heart of these robotics sets has undergone several updates and redesigns, with the latest being called the 'EV3' brick, being sold under the name of Lego Mindstorms EV3. The set includes sensors that detect touch, light, sound and ultrasonic waves, with several others being sold separately, including an RFID reader.

The intelligent brick can be programmed using official software available for Windows and Mac computers, and is downloaded onto the brick via Bluetooth or a USB cable. There are also several unofficial programs and compatible programming languages that have been made to work with the brick, and many books have been written to support this community.

There are several robotics competitions which use the Lego robotics sets. The earliest is Botball, a national U.S. middle- and high-school competition stemming from the MIT 6.270 Lego robotics tournament. Other Lego robotics competitions include FIRST LEGO League Discover for children ages 4–6, FIRST LEGO League Explore for students ages 6–9 and FIRST Lego League Challenge for students ages 9–16 (age 9–14 in the United States, Canada, and Mexico). These programs offer real-world engineering challenges to participants. FIRST LEGO League Challenge uses LEGO-based robots to complete tasks, FIRST LEGO League Explore participants build models out of Lego elements, and FIRST LEGO League Discover participants use Duplo. In its 2019–2020 season, there were 38,609 FIRST LEGO League Challenge teams and 21,703 FIRST LEGO League Explore teams around the world. The international RoboCup Junior football competition involves extensive use of Lego Mindstorms equipment which is often pushed to its extreme limits.

The capabilities of the Mindstorms range have now been harnessed for use in Iko Creative Prosthetic System, a prosthetic limbs system designed for children. Designs for these Lego prosthetics allow everything from mechanical diggers to laser-firing spaceships to be screwed on to the end of a child's limb. Iko is the work of the Chicago-based Colombian designer Carlos Arturo Torres, and is a modular system that allows children to customise their own prosthetics with the ease of clicking together plastic bricks. Designed with Lego's Future Lab, the Danish toy company's experimental research department, and Cirec, a Colombian foundation for physical rehabilitation, the modular prosthetic incorporates myoelectric sensors that register the activity of the muscle in the stump and send a signal to control movement in the attachment. A processing unit in the body of the prosthetic contains an engine compatible with Lego Mindstorms, the company's robotics line, which lets the wearer build an extensive range of customised, programmable limbs.

In popular culture

Lego's popularity is demonstrated by its wide representation and usage in many cultural works, including books, films, and art. It has even been used in the classroom as a teaching tool. In the US, Lego Education North America is a joint venture between Pitsco, Inc. and the educational division of the Lego Group.

In 1998, Lego bricks were one of the original inductees into the National Toy Hall of Fame at The Strong in Rochester, New York.

"Lego" is commonly used as a mass noun ("some Lego") or, in American English, as a countable noun with plural "Legos", to refer to the bricks themselves, but as is common for trademarks, Lego group insists on the name being used as an adjective when referring to a product (as in "LEGO bricks").

Lego is a line of plastic construction toys manufactured by the Lego Group, a privately held company based in Billund, Denmark. Lego consists of variously colored interlocking plastic bricks made of acrylonitrile butadiene styrene that accompany an array of gears, figurines called minifigures, and various other parts. Its pieces can be assembled and connected in many ways to construct objects, including vehicles, buildings, and working robots. Anything constructed can be taken apart again, and the pieces reused to make new things.

The Lego Group began manufacturing the interlocking toy bricks in 1949. Moulding is done in Denmark, Hungary, Mexico, and China. Brick decorations and packaging are done at plants in the former three countries and in the Czech Republic. Annual production of the bricks averages approximately 36 billion, or about 1140 elements per second.

Films, games competitions, and eight Legoland amusement parks have been developed under the brand. One of Europe's biggest companies, Lego is the largest toy manufacturer in the world by sales. As of July 2015, 600 billion Lego parts had been produced.

History

The Lego Group began in the workshop of Ole Kirk Christiansen (1891–1958), a carpenter from Billund, Denmark, who began making wooden toys in 1932. In 1934, his company came to be called "Lego", derived from the Danish phrase leg godt which means "play well". In 1947, Lego expanded to begin producing plastic toys. In 1949 the business began producing, among other new products, an early version of the now familiar interlocking bricks, calling them "Automatic Binding Bricks". These bricks were based on the Kiddicraft Self-Locking Bricks, invented by Hilary Page in 1939 and patented in the United Kingdom in 1940 before being displayed at the 1947 Earl's Court Toy Fair. Lego had received a sample of the Kiddicraft bricks from the supplier of an injection-molding machine that it purchased. The bricks, originally manufactured from cellulose acetate, were a development of the traditional stackable wooden blocks of the time.

The Lego Group's motto, "only the best is good enough" (Danish: det bedste er ikke for godt, literally "the best isn't excessively good") was created in 1936. Christiansen created the motto, still used today, to encourage his employees never to skimp on quality, a value he believed in strongly. By 1951, plastic toys accounted for half of the company's output, even though the Danish trade magazine Legetøjs-Tidende ("Toy Times"), visiting the Lego factory in Billund in the early 1950s, wrote that plastic would never be able to replace traditional wooden toys. Although a common sentiment, Lego toys seem to have become a significant exception to the dislike of plastic in children's toys, due in part to the high standards set by Ole Kirk.

By 1954, Christiansen's son, Godtfred, had become the junior managing director of the Lego Group. It was his conversation with an overseas buyer that led to the idea of a toy system. Godtfred saw the immense potential in Lego bricks to become a system for creative play, but the bricks still had some problems from a technical standpoint: Their locking ability was still limited, and they were not yet versatile. In 1958, the modern brick design was developed; it took five years to find the right material for it, ABS (acrylonitrile butadiene styrene) polymer. A patent application for the modern Lego brick design was filed in Denmark on 28 January 1958 and in various other countries in the subsequent few years.

The Lego Group's Duplo product line was introduced in 1969 and is a range of blocks whose lengths measure twice the width, height, and depth of standard Lego blocks and are aimed towards younger children. In 1978, Lego produced the first minifigures, which have since become a staple in most sets.

In May 2011, Space Shuttle Endeavour mission STS-134 brought 13 Lego kits to the International Space Station, where astronauts built models to see how they would react in microgravity, as a part of the Lego Bricks in Space program. In May 2013, the largest model ever created, made of over 5 million bricks, was displayed in New York City; a one-to-one scale model of a Star Wars X-wing fighter. Other record breakers include a 34-metre (112 ft) tower and a 4 km (2.5 mi) railway.

In February 2015, marketing consulting company Brand Finance ranked Lego as the "world's most powerful brand", overtaking Ferrari.

Lego bricks have acquired a reputation for causing extreme pain when stepped on.

Design

Lego pieces of all varieties constitute a universal system. Despite variations in the design and the purposes of individual pieces over the years, each remains compatible in some way with existing pieces. Lego bricks from 1958 still interlock with those made presently, and Lego sets for young children are compatible with those made for teenagers. Six bricks of 2 × 4 studs can be combined in 915,103,765 ways.

Each piece must be manufactured to an exacting degree of precision. When two pieces are engaged, they must fit firmly, yet be easily disassembled. The machines that manufacture Lego bricks have tolerances as small as 10 micrometres.

Primary concept and development work for the toy takes place at the Billund headquarters, where the company employs approximately 120 designers. The company also has smaller design offices in the UK, Spain, Germany, and Japan which are tasked with developing products aimed specifically at their respective national markets. The average development period for a new product is around twelve months, split into three stages. The first is to identify market trends and developments, including contact by the designers directly with the market; some are stationed in toy shops close to holidays, while others interview children. The second stage is the design and development of the product based on the results of the first stage. As of September 2008 the design teams use 3D modelling software to generate CAD drawings from initial design sketches. The designs are then prototyped using an in-house stereolithography machine. These prototypes are presented to the entire project team for comment and testing by parents and children during the "validation" process. Designs may then be altered in accordance with the results from the focus groups. Virtual models of completed Lego products are built concurrently with the writing of the user instructions. Completed CAD models are also used in the wider organisation for marketing and packaging.

Lego Digital Designer is an official piece of Lego software for Mac OS X and Windows which allows users to create their own digital Lego designs. The program once allowed customers to order custom designs with a service to ship physical models from Digital Designer to consumers; the service ended in 2012.

Manufacturing

Since 1963, Lego pieces have been manufactured from acrylonitrile butadiene styrene (ABS). As of September 2008, Lego engineers use the NX CAD/CAM/CAE PLM software suite to model the elements. The software allows the parts to be optimised by way of mould flow and stress analysis. Prototype moulds are sometimes built before the design is committed to mass production. The ABS plastic is heated to 232 °C (450 °F) until it reaches a dough-like consistency. It is then injected into the moulds using forces of between 25 and 150 tonnes and takes approximately 15 seconds to cool. The moulds are permitted a tolerance of up to twenty micrometres to ensure the bricks remain connected. Human inspectors check the output of the moulds to eliminate significant variations in colour or thickness. According to the Lego Group, about eighteen bricks out of every million fail to meet the standard required.

Lego factories recycle all but about 1 percent of their plastic waste from the manufacturing process. If the plastic cannot be re-used in Lego bricks, it is processed and sold on to industries that can make use of it. Lego, in 2018, set a self-imposed 2030 deadline to find a more eco-friendly alternative to the ABS plastic.

Manufacturing of Lego bricks occurs at several locations around the world. Moulding is done in Billund, Denmark; Nyíregyháza, Hungary; Monterrey, Mexico; and most recently in Jiaxing, China. Brick decorations and packaging are done at plants in the former three countries and in Kladno in the Czech Republic. The Lego Group estimates that in five decades it has produced 400 billion Lego blocks. Annual production of the bricks averages approximately 36 billion, or about 1140 elements per second. According to an article in BusinessWeek in 2006, Lego could also be considered the world's number-one tyre manufacturer; the factory produces about 306 million small rubber tyres a year. The claim was reiterated in 2012.

In December 2012, the BBC's More or Less radio program asked the Open University's engineering department to determine "how many Lego bricks, stacked one on top of the other, it would take for the weight to destroy the bottom brick?" Using a hydraulic testing machine, members of the department determined the average maximum force a 2×2 Lego brick can stand is 4,240 newtons. Since an average 2×2 Lego brick has a mass of 1.152 grams (0.0406 oz), according to their calculations it would take a stack of 375,000 bricks to cause the bottom brick to collapse, which represents a stack 3,591 metres (11,781 ft) in height.

Private tests have shown several thousand assembly-disassembly cycles before the bricks begin to wear out, although Lego tests show fewer cycles.

In 2018, Lego announced that it will be using bio-derived polyethylene to make its botanical elements (parts such as leaves, bushes and trees). The New York Times reported the company's footprint that year was "about a million tons of carbon dioxide each year" and that it was investing about 1 billion kroner and hiring 100 people to work on changes. The paper reported that Lego's researchers "have already experimented with around 200 alternatives." In 2020, Lego announced that it would cease packaging its products in single-use plastic bags and would instead be using recyclable paper bags. In 2021, the company said it would aim to produce its bricks without using crude oil, by using recycled polyethylene terephthalate bottles, but in 2023 it reversed this decision, having found that this did not reduce its carbon dioxide emissions.

Set themes

Since the 1950s, the Lego Group has released thousands of sets with a variety of themes, including space, pirates, trains, (European) castle, dinosaurs, undersea exploration, and wild west, as well as wholly original themes like Bionicle and Hero Factory. Some of the classic themes that continue to the present day include Lego City (a line of sets depicting city life introduced in 1973) and Lego Technic (a line aimed at emulating complex machinery, introduced in 1977).

Over the years, the company has licensed themes from numerous cartoon and film franchises and some from video games. These include Batman, Indiana Jones, Pirates of the Caribbean, Harry Potter, Star Wars, Marvel, and Minecraft. Although some of these themes, Lego Star Wars and Lego Indiana Jones, had highly successful sales, the company expressed in 2015 a desire to rely more upon their own characters and classic themes and less upon such licensed themes. Some sets include references to other themes such as a Bionicle mask in one of the Harry Potter sets. Discontinued sets may become a collectable and command value on the black market.

For the 2012 Summer Olympics in London, Lego released a special Team GB Minifigures series exclusively in the United Kingdom to mark the opening of the games. For the 2016 Summer Olympics and 2016 Summer Paralympics in Rio de Janeiro, Lego released a kit with the Olympic and Paralympic mascots Vinicius and Tom.

One of the largest commercially produced Lego sets was a minifig-scaled edition of the Star Wars Millennium Falcon. Designed by Jens Kronvold Fredericksen, it was released in 2007 and contained 5,195 pieces. It was surpassed by a 5,922-piece Taj Mahal. A redesigned Millennium Falcon retook the top spot in 2017 with 7,541 pieces. Since then, the Millennium Falcon has been superseded by the Lego Art World Map at 11,695 pieces, the Lego Titanic at 9,090 pieces, and the Lego Architect Colosseum at 9,036 pieces.

In 2022, Lego introduced its Eiffel Tower. The set consists of 10,000 parts and reaches a height of 149 cm, which makes it the tallest set and tower but the second in number of parts after the World Map.

Robotics themes

Main articles: Lego Mindstorms, Lego Mindstorms NXT, Lego Mindstorms NXT 2.0, and Lego Mindstorms EV3

The company also initiated a robotics line of toys called 'Mindstorms' in 1999, and has continued to expand and update this range ever since. The roots of the product originate from a programmable brick developed at the MIT Media Lab, and the name is taken from a paper by Seymour Papert, a computer scientist and educator who developed the educational theory of constructionism, and whose research was at times funded by the Lego Group.

The programmable Lego brick which is at the heart of these robotics sets has undergone several updates and redesigns, with the latest being called the 'EV3' brick, being sold under the name of Lego Mindstorms EV3. The set includes sensors that detect touch, light, sound and ultrasonic waves, with several others being sold separately, including an RFID reader.

The intelligent brick can be programmed using official software available for Windows and Mac computers, and is downloaded onto the brick via Bluetooth or a USB cable. There are also several unofficial programs and compatible programming languages that have been made to work with the brick, and many books have been written to support this community.

There are several robotics competitions which use the Lego robotics sets. The earliest is Botball, a national U.S. middle- and high-school competition stemming from the MIT 6.270 Lego robotics tournament. Other Lego robotics competitions include FIRST LEGO League Discover for children ages 4–6, FIRST LEGO League Explore for students ages 6–9 and FIRST Lego League Challenge for students ages 9–16 (age 9–14 in the United States, Canada, and Mexico). These programs offer real-world engineering challenges to participants. FIRST LEGO League Challenge uses LEGO-based robots to complete tasks, FIRST LEGO League Explore participants build models out of Lego elements, and FIRST LEGO League Discover participants use Duplo. In its 2019–2020 season, there were 38,609 FIRST LEGO League Challenge teams and 21,703 FIRST LEGO League Explore teams around the world. The international RoboCup Junior football competition involves extensive use of Lego Mindstorms equipment which is often pushed to its extreme limits.

The capabilities of the Mindstorms range have now been harnessed for use in Iko Creative Prosthetic System, a prosthetic limbs system designed for children. Designs for these Lego prosthetics allow everything from mechanical diggers to laser-firing spaceships to be screwed on to the end of a child's limb. Iko is the work of the Chicago-based Colombian designer Carlos Arturo Torres, and is a modular system that allows children to customise their own prosthetics with the ease of clicking together plastic bricks. Designed with Lego's Future Lab, the Danish toy company's experimental research department, and Cirec, a Colombian foundation for physical rehabilitation, the modular prosthetic incorporates myoelectric sensors that register the activity of the muscle in the stump and send a signal to control movement in the attachment. A processing unit in the body of the prosthetic contains an engine compatible with Lego Mindstorms, the company's robotics line, which lets the wearer build an extensive range of customised, programmable limbs.

In popular culture

Lego's popularity is demonstrated by its wide representation and usage in many cultural works, including books, films, and art. It has even been used in the classroom as a teaching tool. In the US, Lego Education North America is a joint venture between Pitsco, Inc. and the educational division of the Lego Group.

In 1998, Lego bricks were one of the original inductees into the National Toy Hall of Fame at The Strong in Rochester, New York.

"Lego" is commonly used as a mass noun ("some Lego") or, in American English, as a countable noun with plural "Legos", to refer to the bricks themselves, but as is common for trademarks, Lego group insists on the name being used as an adjective when referring to a product (as in "LEGO bricks").

Este fin de semana visitamos unas MInas de Wolframio, con mis amigos del grupo de Geológicas, Honix, Alex, Inma y Mariu.

Tomada con tres flashes, uno frontal y otro detrás de cada modelo. Con posturas un poco forzadas por tener que sujetar el flash por la espalda, pero bueno, de momento es lo que hay.

Ah, y os propongo un encuadre alternativo.

¿Qué os parece?

Camera: Canon EOS 5D Mark II

Exposure: 1/100

Aperture: f/9

Focal Length: 16 mm

ISO Speed: 250

Exposure Program: Manual

Lens: EF16-35mm f/2.8L II USM

Flashes Yongnuo