View allAll Photos Tagged breadboard
My latest set of shop made cutting boards. These are made of chechen (the dark wood), maple, and a mystery wook I had in my shop (the orange-ish color).
I'm making a signal clipping indicator for my car audio system, which will eventually be expanded to a 3 band (or more) EQ/Low Pass/High Pass/Band Pass Filter, Line Output Converter, and more!
....Silver Maple wood from our property used for the cutting board project. The bread loaf for dinner tomorrow and the fine German Riesling wine.... is now gone. haha
* Canon EOS M50
* Canon FL 28mm f/3.5 lens
* Fotasy FD/FL-EOSM lens adapter
iGeigie - world premiere of a portable Geiger Counter with iPhone dock.
- Glass Geiger Tube detects beta and gamma radiation
- Runs on a mophie juice pack
- iGeiger app computes Counts Per Minute (CPM)
- Breadboard architecture allows for continueing upgrades and refinements
- Interface with iPhone through line-in interface
- Ability to call the iGeigie and listen to clicks !
Visit www.rdtn.org and support our Kickstarter project kck.st/hMXtdM to build a hardware monitoring network for radiation in Japan.
Subscribe to RDTN.or Flickr group for seeing measurements by RDTN probes - www.flickr.com/groups/rdtn/ and get live measurement tweets on @RDTNprobes
Measurements from the iGeigie are uploaded here: www.flickr.com/photos/rdtn0007/
Based on an earlier prototype: www.flickr.com/photos/nokton/5602623700/in/photostream/
See more here: blog.rdtn.org/2011/04/14/a-little-of-what-weve-been-up-to/
Released under Creative Commons non commercial attribution license.
Boitiers :
Canon EOS 5D Mark IV
Canon EOS 6D
Optiques :
Canon MP-E 65 mm f/2,8 1:1 ~ 5:1
Canon EF 100mm f/2,8L Macro IS USM
Canon EF 24-70mm f/4L IS USM
Extenseur Canon EF2x II
Extension :
Tube EF25 II
Éclairage/Lumière :
Lightbox fait maison
Flash Canon MT-24EX Macro Twin Lite
Yongnuo YN-600 Air Pro
Yongnuo YN-300 Air
LEDs Manfrotto lumimuse 8
LEDs Manfrotto lumimuse 6
Mouvements de précision :
Contrôleur Cognisys Stackshot 3X (X3)
Rail macro motorisé Cognisys Extended 200 mm (X3)
Rail macro motorisé Cognisys 100 mm (X3)
Tables rotatives Cognisys (X2)
Support de fixations :
Breadboard ThorLabs 600 x 1200 x 12,7 mm sur Workstation : 600x1200mm
Tubes SmallRig diam 15mm (x12)
Fixations :
Adaptateur de serrage Cognisys Arca Stackshot (X4)
Clamp de désengagement rapide (X8)
Clamp équerre de désengagement rapide
Clamp double de désengagement rapide (X5)
Clamp double, rotatif, de désengagement rapide (X2)
Clamp plateau vertical de désengagement rapide pour plateau horizontal (X3)
Plateau de désengagement rapide 400mm (x2)
Plateau de désengagement rapide 220mm (x2)
Plateau de désengagement rapide 200mm (x2)
Plateau de désengagement rapide 150mm (x3)
Plateau de désengagement rapide 120mm
Plateau de désengagement rapide 100mm
Plateau de désengagement rapide 70mm
Plateau de désengagement rapide 60mm (x3)
Plateau vertical de désengagement rapide (x2)
Kit Pan/Tilt court Cognisys
Griffe porte flash SmallRig avec filetage 1/4” (x4)
Collier de fixation en équerre de tubes SmallRig (x2)
Connectique :
Câble de déclenchement N3 Cognisys pour Canon EOS D (x2)
Câbles moteurs 2 m (X8)
Câble micro USB d'interface contrôleur Cognisys/Mac (X3)
Câble USB 3 d'interface boîtier Canon EOS/Mac
Câble USB 2 d'interface boîtier Canon EOS/Mac
Câble mini HDMI/HDMI 1.4
Cordon/sabot déport de flash Canon OC-E3
Écran externe :
Lilliput Q7
Divers :
Kit de batterie Li-ion 5200 mAh Cognisys (X2)
Kit de transport Cognisys pour contrôleur (X3)
Adaptateur secteur pour EOS 5D Mark IV, AC-E6N
This is a prototype for my level crossing. Everything is controlled with an Arduino Nano that sits on 2 breadboards.
Detection will be done on double track using IR detection between the rails. The system should start with a closed barrier and will be opened after software startup. The reason is that it is easier to store a closed level crossing than an open level crossing :). Software needs to be updated to support fading and flashing LEDs. This makes it compatible to use for different countries. For the ring signal I use a DF Player module (MP3), controlled by the IO-2 pin. Using the 2 timers on the Arduino Nano (Servo & fading LED's) it is almost impossible to use the Software Serial library as it affects the fading of the LEDs.
If I am satisfied, a PCB will follow which makes it easier to transport and less vulnerable to bad contacts.
Boitier :
Canon EOS 5D Mark IV
Optique :
Objectif Canon MP-E 65 mm f/2,8 1:1 ~ 5:1
Éclairage/Lumière :
Flash Canon MT-24EX Macro Twin Lite
Flash Canon Speedlite 550 EX E-TTL
LEDs Manfrotto lumimuse 8
LEDs Manfrotto lumimuse 6
Ampoule LED Philips Hue - Culot GU10
Mouvements de précision :
Contrôleur Cognisys Stackshot 3X (X2)
Rail macro motorisé Cognisys Extended 200 mm (X2)
Rail macro motorisé Cognisys 100 mm
Tables rotatives Cognisys (X2)
Mouvements/Fixations :
Breadboard ThorLabs 600 X 600 X 12,7 mm
Rotule Pro vidéo fluide Manfrotto MVH502AH
Bras à friction Manfrotto 244 (X2)
Bras à friction Manfrotto 244 MicroKit
Trépieds de table Manfrotto MTPIXI-B (X2)
Fixations :
Adaptateur de serrage Cognisys Arca Stackshot
Clamp de désengagement rapide Cognisys (X3)
Clamp de désengagement rapide Wemberley C-12 (X2)
Plateau de désengagement rapide Wemberley P-20 (X2)
Plateau de désengagement rapide Wemberley P-5
Plateau de désengagement rapide SmallRig (X2)
Plaques Pan/Tilt Cognisys (X2)
Double queues d'arronde nodal diapositive Rail vertical avec Clamp de désengagement rapide 90° Haoge (X2)
Adaptateur rapide Manfrotto 014-38 (X2)
Connectique :
Câble de déclenchement N3 Cognisys pour Canon EOS D
Câbles moteurs 2 m (X5)
Câble micro USB d'interface contrôleur Cognisys/Mac (X2)
Câble USB 3 d'interface boîtier Canon EOS/Mac
Alimentation :
Kit de batterie Li-ion 5200 mAh Cognisys
Kit de transport Cognisys pour contrôleur
Divers :
Tableaux acrylique Neewer noir et blanc pour table photo
Boitiers :
Canon EOS 5D Mark IV
Canon EOS 6D
Optiques :
Canon MP-E 65 mm f/2,8 1:1 ~ 5:1
Canon EF 100mm f/2,8L Macro IS USM
Canon EF 24-70mm f/4L IS USM
Extenseur Canon EF2x II
Extension :
Tube EF25 II
Éclairage/Lumière :
Lightbox fait maison
Flash Canon MT-24EX Macro Twin Lite
Yongnuo YN-600 Air Pro
Yongnuo YN-300 Air
LEDs Manfrotto lumimuse 8
LEDs Manfrotto lumimuse 6
Mouvements de précision :
Contrôleur Cognisys Stackshot 3X (X3)
Rail macro motorisé Cognisys Extended 200 mm (X3)
Rail macro motorisé Cognisys 100 mm (X3)
Tables rotatives Cognisys (X2)
Support de fixations :
Breadboard ThorLabs 600 x 1200 x 12,7 mm sur Workstation : 600x1200mm
Tubes SmallRig diam 15mm (x12)
Fixations :
Adaptateur de serrage Cognisys Arca Stackshot (X4)
Clamp de désengagement rapide (X8)
Clamp équerre de désengagement rapide
Clamp double de désengagement rapide (X5)
Clamp double, rotatif, de désengagement rapide (X2)
Clamp plateau vertical de désengagement rapide pour plateau horizontal (X3)
Plateau de désengagement rapide 400mm (x2)
Plateau de désengagement rapide 220mm (x2)
Plateau de désengagement rapide 200mm (x2)
Plateau de désengagement rapide 150mm (x3)
Plateau de désengagement rapide 120mm
Plateau de désengagement rapide 100mm
Plateau de désengagement rapide 70mm
Plateau de désengagement rapide 60mm (x3)
Plateau vertical de désengagement rapide (x2)
Kit Pan/Tilt court Cognisys
Griffe porte flash SmallRig avec filetage 1/4” (x4)
Collier de fixation en équerre de tubes SmallRig (x2)
Connectique :
Câble de déclenchement N3 Cognisys pour Canon EOS D (x2)
Câbles moteurs 2 m (X8)
Câble micro USB d'interface contrôleur Cognisys/Mac (X3)
Câble USB 3 d'interface boîtier Canon EOS/Mac
Câble USB 2 d'interface boîtier Canon EOS/Mac
Câble mini HDMI/HDMI 1.4
Cordon/sabot déport de flash Canon OC-E3
Écran externe :
Lilliput Q7
Divers :
Kit de batterie Li-ion 5200 mAh Cognisys (X2)
Kit de transport Cognisys pour contrôleur (X3)
Adaptateur secteur pour EOS 5D Mark IV, AC-E6N
I couldn't resist and made another homemade bread today, it turned out a lot better then the one I made yesterday.
This nearly 3800 square foot colonial built in 1983 is evocative of the earlier home that once stood on this property. Light fills the inviting four season porch and formal living room with red oak floors. The blue-and-white motifs, breadboard wall, comfy upholstered furniture and pillows galore give this gorgeous home a beachy feel that reflects the owner's interior design expertise.
See flic.kr/s/aHBqjAL8JP for more scenes from this event.
(Photo credit Bob Gundersen www.flickr.com/photos/bobphoto51/albums)
Boitiers :
Canon EOS 5D Mark IV
Canon EOS 6D
Optiques :
Canon MP-E 65 mm f/2,8 1:1 ~ 5:1
Canon EF 100mm f/2,8L Macro IS USM
Canon EF 24-70mm f/4L IS USM
Extenseur Canon EF2x II
Extension :
Tube EF25 II
Éclairage/Lumière :
Lightbox fait maison
Flash Canon MT-24EX Macro Twin Lite
Yongnuo YN-600 Air Pro
Yongnuo YN-300 Air
LEDs Manfrotto lumimuse 8
LEDs Manfrotto lumimuse 6
Mouvements de précision :
Contrôleur Cognisys Stackshot 3X (X3)
Rail macro motorisé Cognisys Extended 200 mm (X3)
Rail macro motorisé Cognisys 100 mm (X3)
Tables rotatives Cognisys (X2)
Support de fixations :
Breadboard ThorLabs 600 x 1200 x 12,7 mm sur Workstation : 600x1200mm
Tubes SmallRig diam 15mm (x12)
Fixations :
Adaptateur de serrage Cognisys Arca Stackshot (X4)
Clamp de désengagement rapide (X8)
Clamp équerre de désengagement rapide
Clamp double de désengagement rapide (X5)
Clamp double, rotatif, de désengagement rapide (X2)
Clamp plateau vertical de désengagement rapide pour plateau horizontal (X3)
Plateau de désengagement rapide 400mm (x2)
Plateau de désengagement rapide 220mm (x2)
Plateau de désengagement rapide 200mm (x2)
Plateau de désengagement rapide 150mm (x3)
Plateau de désengagement rapide 120mm
Plateau de désengagement rapide 100mm
Plateau de désengagement rapide 70mm
Plateau de désengagement rapide 60mm (x3)
Plateau vertical de désengagement rapide (x2)
Kit Pan/Tilt court Cognisys
Griffe porte flash SmallRig avec filetage 1/4” (x4)
Collier de fixation en équerre de tubes SmallRig (x2)
Connectique :
Câble de déclenchement N3 Cognisys pour Canon EOS D (x2)
Câbles moteurs 2 m (X8)
Câble micro USB d'interface contrôleur Cognisys/Mac (X3)
Câble USB 3 d'interface boîtier Canon EOS/Mac
Câble USB 2 d'interface boîtier Canon EOS/Mac
Câble mini HDMI/HDMI 1.4
Cordon/sabot déport de flash Canon OC-E3
Écran externe :
Lilliput Q7
Divers :
Kit de batterie Li-ion 5200 mAh Cognisys (X2)
Kit de transport Cognisys pour contrôleur (X3)
Adaptateur secteur pour EOS 5D Mark IV, AC-E6N
A mug of tea with toasted muffins with butter and jam or honey - that's good :)
(Observant viewers will have noted that I took this photo with my iPhone and might wonder how I did it. I set 10 seconds on the timer and held the 'phone between my teeth.)
The hereios of the We're Here! group have paid a visit to the Bread group today.
Stuck for an idea for your daily 365 shot? Try the hereios of the We're Here! group for inspiration.
Boitiers :
Canon EOS 5D Mark IV
Canon EOS 6D
Optiques :
Canon MP-E 65 mm f/2,8 1:1 ~ 5:1
Canon EF 100mm f/2,8L Macro IS USM
Canon EF 24-70mm f/4L IS USM
Extenseur Canon EF2x II
Extension :
Tube EF25 II
Éclairage/Lumière :
Lightbox fait maison
Flash Canon MT-24EX Macro Twin Lite
Yongnuo YN-600 Air Pro
Yongnuo YN-300 Air
LEDs Manfrotto lumimuse 8
LEDs Manfrotto lumimuse 6
Mouvements de précision :
Contrôleur Cognisys Stackshot 3X (X3)
Rail macro motorisé Cognisys Extended 200 mm (X3)
Rail macro motorisé Cognisys 100 mm (X3)
Tables rotatives Cognisys (X2)
Support de fixations :
Breadboard ThorLabs 600 x 1200 x 12,7 mm sur Workstation : 600x1200mm
Tubes SmallRig diam 15mm (x12)
Fixations :
Adaptateur de serrage Cognisys Arca Stackshot (X4)
Clamp de désengagement rapide (X8)
Clamp équerre de désengagement rapide
Clamp double de désengagement rapide (X5)
Clamp double, rotatif, de désengagement rapide (X2)
Clamp plateau vertical de désengagement rapide pour plateau horizontal (X3)
Plateau de désengagement rapide 400mm (x2)
Plateau de désengagement rapide 220mm (x2)
Plateau de désengagement rapide 200mm (x2)
Plateau de désengagement rapide 150mm (x3)
Plateau de désengagement rapide 120mm
Plateau de désengagement rapide 100mm
Plateau de désengagement rapide 70mm
Plateau de désengagement rapide 60mm (x3)
Plateau vertical de désengagement rapide (x2)
Kit Pan/Tilt court Cognisys
Griffe porte flash SmallRig avec filetage 1/4” (x4)
Collier de fixation en équerre de tubes SmallRig (x2)
Connectique :
Câble de déclenchement N3 Cognisys pour Canon EOS D (x2)
Câbles moteurs 2 m (X8)
Câble micro USB d'interface contrôleur Cognisys/Mac (X3)
Câble USB 3 d'interface boîtier Canon EOS/Mac
Câble USB 2 d'interface boîtier Canon EOS/Mac
Câble mini HDMI/HDMI 1.4
Cordon/sabot déport de flash Canon OC-E3
Écran externe :
Lilliput Q7
Divers :
Kit de batterie Li-ion 5200 mAh Cognisys (X2)
Kit de transport Cognisys pour contrôleur (X3)
Adaptateur secteur pour EOS 5D Mark IV, AC-E6N
Boitier :
Canon EOS 5D Mark IV
Optique :
Objectif Canon MP-E 65 mm f/2,8 1:1 ~ 5:1
Éclairage/Lumière :
Flash Canon MT-24EX Macro Twin Lite
Flash Canon Speedlite 550 EX E-TTL
LEDs Manfrotto lumimuse 8
LEDs Manfrotto lumimuse 6
Ampoule LED Philips Hue - Culot GU10
Mouvements de précision :
Contrôleur Cognisys Stackshot 3X (X2)
Rail macro motorisé Cognisys Extended 200 mm (X2)
Rail macro motorisé Cognisys 100 mm
Tables rotatives Cognisys (X2)
Mouvements/Fixations :
Breadboard ThorLabs 600 X 600 X 12,7 mm
Rotule Pro vidéo fluide Manfrotto MVH502AH
Bras à friction Manfrotto 244 (X2)
Bras à friction Manfrotto 244 MicroKit
Trépieds de table Manfrotto MTPIXI-B (X2)
Fixations :
Adaptateur de serrage Cognisys Arca Stackshot
Clamp de désengagement rapide Cognisys (X3)
Clamp de désengagement rapide Wemberley C-12 (X2)
Plateau de désengagement rapide Wemberley P-20 (X2)
Plateau de désengagement rapide Wemberley P-5
Plateau de désengagement rapide SmallRig (X2)
Plaques Pan/Tilt Cognisys (X2)
Double queues d'arronde nodal diapositive Rail vertical avec Clamp de désengagement rapide 90° Haoge (X2)
Adaptateur rapide Manfrotto 014-38 (X2)
Connectique :
Câble de déclenchement N3 Cognisys pour Canon EOS D
Câbles moteurs 2 m (X5)
Câble micro USB d'interface contrôleur Cognisys/Mac (X2)
Câble USB 3 d'interface boîtier Canon EOS/Mac
Alimentation :
Kit de batterie Li-ion 5200 mAh Cognisys
Kit de transport Cognisys pour contrôleur
Divers :
Tableaux acrylique Neewer noir et blanc pour table photo
The ISRU Pilot Excavator (IPEx) breadboard unit, also known as RASSOR, digs in the regolith bin during testing inside Swamp Works at NASA’s Kennedy Space Center in Florida on July 28, 2022. On the surface of the Moon, mining robots like the IPEx will excavate the regolith and take the material to a processing plant where usable elements such as hydrogen, oxygen and water can be extracted for life support systems and make operations on the Moon sustainable. Photo credit: NASA/Frank Michaux
Boitier :
Canon EOS 5D Mark IV
Optique :
Objectif Canon MP-E 65 mm f/2,8 1:1 ~ 5:1
Éclairage/Lumière :
Flash Canon MT-24EX Macro Twin Lite
Flash Canon Speedlite 550 EX E-TTL
LEDs Manfrotto lumimuse 8
LEDs Manfrotto lumimuse 6
Ampoule LED Philips Hue - Culot GU10
Mouvements de précision :
Contrôleur Cognisys Stackshot 3X (X2)
Rail macro motorisé Cognisys Extended 200 mm (X2)
Rail macro motorisé Cognisys 100 mm
Tables rotatives Cognisys (X2)
Mouvements/Fixations :
Breadboard ThorLabs 600 X 600 X 12,7 mm
Rotule Pro vidéo fluide Manfrotto MVH502AH
Bras à friction Manfrotto 244 (X2)
Bras à friction Manfrotto 244 MicroKit
Trépieds de table Manfrotto MTPIXI-B (X2)
Fixations :
Adaptateur de serrage Cognisys Arca Stackshot
Clamp de désengagement rapide Cognisys (X3)
Clamp de désengagement rapide Wemberley C-12 (X2)
Plateau de désengagement rapide Wemberley P-20 (X2)
Plateau de désengagement rapide Wemberley P-5
Plateau de désengagement rapide SmallRig (X2)
Plaques Pan/Tilt Cognisys (X2)
Double queues d'arronde nodal diapositive Rail vertical avec Clamp de désengagement rapide 90° Haoge (X2)
Adaptateur rapide Manfrotto 014-38 (X2)
Connectique :
Câble de déclenchement N3 Cognisys pour Canon EOS D
Câbles moteurs 2 m (X5)
Câble micro USB d'interface contrôleur Cognisys/Mac (X2)
Câble USB 3 d'interface boîtier Canon EOS/Mac
Alimentation :
Kit de batterie Li-ion 5200 mAh Cognisys
Kit de transport Cognisys pour contrôleur
Divers :
Tableaux acrylique Neewer noir et blanc pour table photo
Boitier :
Canon EOS 5D Mark IV
Optique :
Objectif Canon MP-E 65 mm f/2,8 1:1 ~ 5:1
Éclairage/Lumière :
Flash Canon MT-24EX Macro Twin Lite
Flash Canon Speedlite 550 EX E-TTL
LEDs Manfrotto lumimuse 8
LEDs Manfrotto lumimuse 6
Ampoule LED Philips Hue - Culot GU10
Mouvements de précision :
Contrôleur Cognisys Stackshot 3X (X2)
Rail macro motorisé Cognisys Extended 200 mm (X2)
Rail macro motorisé Cognisys 100 mm
Tables rotatives Cognisys (X2)
Mouvements/Fixations :
Breadboard ThorLabs 600 X 600 X 12,7 mm
Rotule Pro vidéo fluide Manfrotto MVH502AH
Bras à friction Manfrotto 244 (X2)
Bras à friction Manfrotto 244 MicroKit
Trépieds de table Manfrotto MTPIXI-B (X2)
Fixations :
Adaptateur de serrage Cognisys Arca Stackshot
Clamp de désengagement rapide Cognisys (X3)
Clamp de désengagement rapide Wemberley C-12 (X2)
Plateau de désengagement rapide Wemberley P-20 (X2)
Plateau de désengagement rapide Wemberley P-5
Plateau de désengagement rapide SmallRig (X2)
Plaques Pan/Tilt Cognisys (X2)
Double queues d'arronde nodal diapositive Rail vertical avec Clamp de désengagement rapide 90° Haoge (X2)
Adaptateur rapide Manfrotto 014-38 (X2)
Connectique :
Câble de déclenchement N3 Cognisys pour Canon EOS D
Câbles moteurs 2 m (X5)
Câble micro USB d'interface contrôleur Cognisys/Mac (X2)
Câble USB 3 d'interface boîtier Canon EOS/Mac
Alimentation :
Kit de batterie Li-ion 5200 mAh Cognisys
Kit de transport Cognisys pour contrôleur
Divers :
Tableaux acrylique Neewer noir et blanc pour table photo
Boitiers :
Canon EOS 5D Mark IV
Canon EOS 6D
Optiques :
Canon MP-E 65 mm f/2,8 1:1 ~ 5:1
Canon EF 100mm f/2,8L Macro IS USM
Canon EF 24-70mm f/4L IS USM
Extenseur Canon EF2x II
Extension :
Tube EF25 II
Éclairage/Lumière :
Lightbox fait maison
Flash Canon MT-24EX Macro Twin Lite
Yongnuo YN-600 Air Pro
Yongnuo YN-300 Air
LEDs Manfrotto lumimuse 8
LEDs Manfrotto lumimuse 6
Mouvements de précision :
Contrôleur Cognisys Stackshot 3X (X3)
Rail macro motorisé Cognisys Extended 200 mm (X3)
Rail macro motorisé Cognisys 100 mm (X3)
Tables rotatives Cognisys (X2)
Support de fixations :
Breadboard ThorLabs 600 x 1200 x 12,7 mm sur Workstation : 600x1200mm
Tubes SmallRig diam 15mm (x12)
Fixations :
Adaptateur de serrage Cognisys Arca Stackshot (X4)
Clamp de désengagement rapide (X8)
Clamp équerre de désengagement rapide
Clamp double de désengagement rapide (X5)
Clamp double, rotatif, de désengagement rapide (X2)
Clamp plateau vertical de désengagement rapide pour plateau horizontal (X3)
Plateau de désengagement rapide 400mm (x2)
Plateau de désengagement rapide 220mm (x2)
Plateau de désengagement rapide 200mm (x2)
Plateau de désengagement rapide 150mm (x3)
Plateau de désengagement rapide 120mm
Plateau de désengagement rapide 100mm
Plateau de désengagement rapide 70mm
Plateau de désengagement rapide 60mm (x3)
Plateau vertical de désengagement rapide (x2)
Kit Pan/Tilt court Cognisys
Griffe porte flash SmallRig avec filetage 1/4” (x4)
Collier de fixation en équerre de tubes SmallRig (x2)
Connectique :
Câble de déclenchement N3 Cognisys pour Canon EOS D (x2)
Câbles moteurs 2 m (X8)
Câble micro USB d'interface contrôleur Cognisys/Mac (X3)
Câble USB 3 d'interface boîtier Canon EOS/Mac
Câble USB 2 d'interface boîtier Canon EOS/Mac
Câble mini HDMI/HDMI 1.4
Cordon/sabot déport de flash Canon OC-E3
Écran externe :
Lilliput Q7
Divers :
Kit de batterie Li-ion 5200 mAh Cognisys (X2)
Kit de transport Cognisys pour contrôleur (X3)
Adaptateur secteur pour EOS 5D Mark IV, AC-E6N
Breadboard End Chopping Board in Light and Dark Red Meranti with oak draw bore pins and mortise and tenon joinery, this should be around for a while. Design is by Paul Sellers.
A slightly over engineered clock? 32KB RAM, 16KB ROM, 4Mhz 8bit 65C02 CPU running EHBASIC
Now two SPI devices: a DS3234 RTC and a MAX7219 7 segment driver (top right). And wired for a third (SD Card?). They're all sharing Clock and Data lines to the 6522 VIA.
This is one of my favourite Loafs - Warburtons Seeded Batch....hmmm yummy, I think my food shots may be improving and I am delighted tonight as 7 of my images have been accepted by Getty Images !!
ODC Challenge Bread
Thanks for stopping to view, comment and if you like fave, all are very much appreciated :o)
Using my loaf for the day that in it, this is just a bread n butter shot, just to let you know I'm not brown bread just yet.
One of Ireland's most popular breads, Brennan's white sliced family pan, nicely wrapped for Saint Patrick's weekend 2024.
Lá Fhéile Pádraig sona duit!
Happy Saint Patrick's Day 2024, wherever you are.
Boitier :
Canon EOS 5D Mark IV
Optique :
Objectif Canon MP-E 65 mm f/2,8 1:1 ~ 5:1
Éclairage/Lumière :
Flash Canon MT-24EX Macro Twin Lite
Flash Canon Speedlite 550 EX E-TTL
LEDs Manfrotto lumimuse 8
LEDs Manfrotto lumimuse 6
Ampoule LED Philips Hue - Culot GU10
Mouvements de précision :
Contrôleur Cognisys Stackshot 3X (X2)
Rail macro motorisé Cognisys Extended 200 mm (X2)
Rail macro motorisé Cognisys 100 mm
Tables rotatives Cognisys (X2)
Mouvements/Fixations :
Breadboard ThorLabs 600 X 600 X 12,7 mm
Rotule Pro vidéo fluide Manfrotto MVH502AH
Bras à friction Manfrotto 244 (X2)
Bras à friction Manfrotto 244 MicroKit
Trépieds de table Manfrotto MTPIXI-B (X2)
Fixations :
Adaptateur de serrage Cognisys Arca Stackshot
Clamp de désengagement rapide Cognisys (X3)
Clamp de désengagement rapide Wemberley C-12 (X2)
Plateau de désengagement rapide Wemberley P-20 (X2)
Plateau de désengagement rapide Wemberley P-5
Plateau de désengagement rapide SmallRig (X2)
Plaques Pan/Tilt Cognisys (X2)
Double queues d'arronde nodal diapositive Rail vertical avec Clamp de désengagement rapide 90° Haoge (X2)
Adaptateur rapide Manfrotto 014-38 (X2)
Connectique :
Câble de déclenchement N3 Cognisys pour Canon EOS D
Câbles moteurs 2 m (X5)
Câble micro USB d'interface contrôleur Cognisys/Mac (X2)
Câble USB 3 d'interface boîtier Canon EOS/Mac
Alimentation :
Kit de batterie Li-ion 5200 mAh Cognisys
Kit de transport Cognisys pour contrôleur
Divers :
Tableaux acrylique Neewer noir et blanc pour table photo
Or br-inner, in my case 8D. My torch actually ran out of gas part-way through this so it's not as caramelized as I wanted to make it. Still delicious though.
Story and recipe on my blog.
Boitier :
Canon EOS 5D Mark IV
Optique :
Objectif Canon MP-E 65 mm f/2,8 1:1 ~ 5:1
Éclairage/Lumière :
Flash Canon MT-24EX Macro Twin Lite
Flash Canon Speedlite 550 EX E-TTL
LEDs Manfrotto lumimuse 8
LEDs Manfrotto lumimuse 6
Ampoule LED Philips Hue - Culot GU10
Mouvements de précision :
Contrôleur Cognisys Stackshot 3X (X2)
Rail macro motorisé Cognisys Extended 200 mm (X2)
Rail macro motorisé Cognisys 100 mm
Tables rotatives Cognisys (X2)
Mouvements/Fixations :
Breadboard ThorLabs 600 X 600 X 12,7 mm
Rotule Pro vidéo fluide Manfrotto MVH502AH
Bras à friction Manfrotto 244 (X2)
Bras à friction Manfrotto 244 MicroKit
Trépieds de table Manfrotto MTPIXI-B (X2)
Fixations :
Adaptateur de serrage Cognisys Arca Stackshot
Clamp de désengagement rapide Cognisys (X3)
Clamp de désengagement rapide Wemberley C-12 (X2)
Plateau de désengagement rapide Wemberley P-20 (X2)
Plateau de désengagement rapide Wemberley P-5
Plateau de désengagement rapide SmallRig (X2)
Plaques Pan/Tilt Cognisys (X2)
Double queues d'arronde nodal diapositive Rail vertical avec Clamp de désengagement rapide 90° Haoge (X2)
Adaptateur rapide Manfrotto 014-38 (X2)
Connectique :
Câble de déclenchement N3 Cognisys pour Canon EOS D
Câbles moteurs 2 m (X5)
Câble micro USB d'interface contrôleur Cognisys/Mac (X2)
Câble USB 3 d'interface boîtier Canon EOS/Mac
Alimentation :
Kit de batterie Li-ion 5200 mAh Cognisys
Kit de transport Cognisys pour contrôleur
Divers :
Tableaux acrylique Neewer noir et blanc pour table photo
H-Bridge made with 4 2N2222 NPN transistors
an arduino
More info and tutorial on Instructables
This will be the chemical dispacher. during the developping process I'll have to refill 6 bottles with one draining pipe.
For more on the machine see : diyautolab.blogspot.com/
(in french for now)
And others pictures will be published on this account : diy-effixe on Flickr
A team from the Granular Mechanics and Regolith Operations Lab operates a test of the ISRU Pilot Excavator (IPEx) breadboard unit, also known as RASSOR, in regolith bin inside Swamp Works at NASA’s Kennedy Space Center in Florida on July 28, 2022. On the surface of the Moon, mining robots like the IPEx will excavate the regolith and take the material to a processing plant where usable elements such as hydrogen, oxygen and water can be extracted for life support systems and make operations on the Moon sustainable. Photo credit: NASA/Frank Michaux
i make this a lot... to the point that we rarely buy store-bought, at least lately. difficult to describe how good it is so i won't really try.
Pentax K-3 | A50/1.4 (top) FA31/1.8 (bottom)
With the lights out, the ISRU Pilot Excavator (IPEx) breadboard unit, also known as RASSOR, digs in the regolith bin during testing inside Swamp Works at NASA’s Kennedy Space Center in Florida on July 28, 2022. On the surface of the Moon, mining robots like the IPEx will excavate the regolith and take the material to a processing plant where usable elements such as hydrogen, oxygen and water can be extracted for life support systems and make operations on the Moon sustainable. Photo credit: NASA/Frank Michaux
Boitiers :
Canon EOS 5D Mark IV
Canon EOS 6D
Optiques :
Canon MP-E 65 mm f/2,8 1:1 ~ 5:1
Canon EF 100mm f/2,8L Macro IS USM
Canon EF 24-70mm f/4L IS USM
Extenseur Canon EF2x II
Extension :
Tube EF25 II
Éclairage/Lumière :
Lightbox fait maison
Flash Canon MT-24EX Macro Twin Lite
Yongnuo YN-600 Air Pro
Yongnuo YN-300 Air
LEDs Manfrotto lumimuse 8
LEDs Manfrotto lumimuse 6
Mouvements de précision :
Contrôleur Cognisys Stackshot 3X (X3)
Rail macro motorisé Cognisys Extended 200 mm (X3)
Rail macro motorisé Cognisys 100 mm (X3)
Tables rotatives Cognisys (X2)
Support de fixations :
Breadboard ThorLabs 600 x 1200 x 12,7 mm sur Workstation : 600x1200mm
Tubes SmallRig diam 15mm (x12)
Fixations :
Adaptateur de serrage Cognisys Arca Stackshot (X4)
Clamp de désengagement rapide (X8)
Clamp équerre de désengagement rapide
Clamp double de désengagement rapide (X5)
Clamp double, rotatif, de désengagement rapide (X2)
Clamp plateau vertical de désengagement rapide pour plateau horizontal (X3)
Plateau de désengagement rapide 400mm (x2)
Plateau de désengagement rapide 220mm (x2)
Plateau de désengagement rapide 200mm (x2)
Plateau de désengagement rapide 150mm (x3)
Plateau de désengagement rapide 120mm
Plateau de désengagement rapide 100mm
Plateau de désengagement rapide 70mm
Plateau de désengagement rapide 60mm (x3)
Plateau vertical de désengagement rapide (x2)
Kit Pan/Tilt court Cognisys
Griffe porte flash SmallRig avec filetage 1/4” (x4)
Collier de fixation en équerre de tubes SmallRig (x2)
Connectique :
Câble de déclenchement N3 Cognisys pour Canon EOS D (x2)
Câbles moteurs 2 m (X8)
Câble micro USB d'interface contrôleur Cognisys/Mac (X3)
Câble USB 3 d'interface boîtier Canon EOS/Mac
Câble USB 2 d'interface boîtier Canon EOS/Mac
Câble mini HDMI/HDMI 1.4
Cordon/sabot déport de flash Canon OC-E3
Écran externe :
Lilliput Q7
Divers :
Kit de batterie Li-ion 5200 mAh Cognisys (X2)
Kit de transport Cognisys pour contrôleur (X3)
Adaptateur secteur pour EOS 5D Mark IV, AC-E6N
Breadboards are one of the most fundamental pieces when learning how to build circuits. So why do we call this electronic “circuit builder” a breadboard? Many years ago, when electronics were big and bulky, people would grab their mom’s breadboard, a few nails or thumbtacks, and start connecting wires onto the board to give themselves a platform on which to build their circuits. Since then, electronic components have gotten a lot smaller, and we’ve come up with better ways to connect circuits, making moms all over the world happy to have their breadboards back. However, we are stuck with the confusing name. Technically, these are still breadboards, but this discussion is going to be on modern, “solderless” breadboards. An electronics breadboard (as opposed to the type on which sandwiches are made) is actually referring to a solderless breadboard. These are great units for making temporary circuits and prototyping, and they require absolutely no soldering.