Here the bracket has been removed, by pulling the pins out and then pulling the bracket off

Bracket fungus

polera / mujer / talla M/ edición 4 disponibles

This may or may not be a bracket fungus, but I think it is.

Photo taken at Bicton Gardens

Bracket Fungus seen on a rotting log at Broomhead reservoir.

For old fogies like me, it was about 2" wide; for the rest of you anout 50mm.

Anyone got an ID on this one please?

Been shooting a bunch of black and whites for "flash of red"...not my forte

The log stacks at Abberton Reservoir are playing host to some fine fungi, like this Trametes sp. bracket!

An example image from my e-book guides

Decorative brackets on the Pink Line El structure above Roosevelt Road.

This variation of the bearing bracket widens the inner radius surrounding the bearing by 0.5mm. I also raised a 1mm ring around the top surface to strengthen the larger, upper tear-drop shaped bolt holes.

See www.thingiverse.com/thing:1064

Interesting colours and forms of rainforest fungi give the observant trekker something to look for at the leaf-litter level.

Went a bit of a fungus expedition near Pickering, came up with quite a collection. All on the Nikon D3 where the ISO versatility helps in the rather dark condityions and the trust5 manual 55mm f3.5 Ai Nikkor

COPENHAGEN, DENMARK - JULY 16: Marco "Melser" Amaro (L) and Vicente "Tacolilla" Compagnon of Leviatan react with excitement at the VALORANT Champions Tour: Stage 2 Masters Bracket Stage on July 16, 2022 in Copenhagen, Denmark. (Photo by Colin Young-Wolff/Riot Games)

Bracket fungus on a downed tree in Beaver Creek Conservation Area south of Saskatoon SK

Bottom bracket and chainset mounting at Veloform

Went a bit of a fungus expedition near Pickering, came up with quite a collection. All on the Nikon D3 where the ISO versatility helps in the rather dark condityions and the trust5 manual 55mm f3.5 Ai Nikkor

Bracket fungus. 21 October 2017. Perivale, Ealing, London, England, UK.

The fungus is 8cm across. I can't identify the species but I'll try and go back to identify the host tree which might help.

Please contact me to arrange the use of any of my images. They are copyright, all rights reserved.

Hundreds of tiny Bracket Fungus on a fallen log at a Daly Point trail in Bathurst, New Brunswick.

|| Photo info: Taken 2022-10-07 with Canon EOS 5D Mark IV, EF24-70mm f/2.8L II USM, 2.0 sec at f/5.0, focal length 44 mm, ISO ISO 400. Copyright 2022 .

Macro Monday - theme: DIY

I made brackets like these for each of my flash units. When a flash is on an umbrella adapter with an umbrella, with this bracket it's flat and very close to the stem of the umbrella, aimed along the center axis (instead of 5"-8" offset in typical position on an umbrella adapter). Also, the weight of the flash unit counter-balances the umbrella better.

See next image to get the visual details and perspective.

The Foundations Tour

March 25th, 2014

Soundcheck Studios

Richmond, VA

All cleaned up and installed it looks like it was made for this trailer at the factory.

Guava berries

Isn't that a pretty design? Why thank you, I think so, too!

Mahogany stair bracket on the right main staircase in Drayton Hall. The design features carved squash and lotus blooms.

A printable replacement for the top bearing brackets. Includes side holes for captive-nut locking bearing in place.

www.thingiverse.com/thing:1064

Amazing iPad Wall Brackets for Kiosks! iPad Kiosk Wall Bracket

Fungi (Ganodermataceae family) / August, Habersham Co., Georgia , USA / Copyright ©2010 by William Tanneberger - All Rights Reserved.

Lacquered Bracket (Ganoderma Lucidum)

Rural Habersham Co., GA (Homewoods)

Because I’m a sucker for good drama, believe that Cinderella Story may be the new black, and am beholden to the University System of Maryland for signing my paychecks, here’s my bracket: an all DC metro area final with the Terps shocking everyone. It could happen. Fireproof your couches.

To support the aluminium inlet elbow, RB uses a two-piece cad-plated bracket. The horizontal piece is drilled to fit the two stock mounting bolts, and also the two drilled holes in the elbow. The rearmost of the four bolts also slips through the vertical bracket, which in turn bolts into one of the holes used to support the stock airbox.

While I'm thinking of it: One of the things that made this installation a lot easier was something I learned years ago and do automatically: Never tighten the first nut all the way. On this, and also on the Z-bracket in the adjacent picture, I finger-tightened all the nuts & bolts to get the piece situated well. Once I knew everything was lined up and in the right orientation, THEN it was time to snug everything down.

Sparkey Wood, Wickham Bishops, Essex

Charleston, South Carolina

Double brackets under the window pending grout in the marble tile.

I decided to hang my guitar on the wall using this instructable:

www.instructables.com/id/ETJVVQQCJ1EP287HSI/?ALLSTEPS

I used some bracket I already had, and coverd them with acrylic yarn.

overall I'm slightly worried that this setup isn't stable enough as these brackets only have one screw hole aligned horizontally and not two like those in the instructable.

sheet metal brackets