View allAll Photos Tagged bfgoodrich
1989 Miller Beer/BFGoodrich Porsche 962. Winner 24 Hours of Daytona Bob Wollek, Derek Bell, John Andretti. It recently sold for $2.2 million.
Pima Air and Space Museum
SR-71 MAIN LANDING GEAR TIRE
The Blackbird's tires are made of rubber that has been impregnated with aluminum in order resist the high temperatures that build up as the aircraft flies at over Mach 3. The tires were manufactured by B. F. Goodrich and are inflated with nitrogen to about 415 pounds of pressure. Each tire cost over $2000US and was good for about 15 landings.
More Info: www.axialracing.com/t/vehicles/rr10
The RR10 Bomber build-it-yourself kit is loaded with features allowing you to customize it and add your own electronics for the ultimate rock racer! Building on the current, successful ready-to-run model, this kit version includes a wide variety of desirable option parts that deliver next level performance and durability. Hard anodized aluminum suspension links, hard anodized aluminum steering links, long travel rear sway bar, hardened steel universal axles allowing up to 50 degrees of steering, aluminum lower link plates, and King adjustable machined aluminum shocks, all riding on sticky BFGoodrich® Baja T/A® KR2 tires wrapped around 2.2 Walker Evans Racing beadlock wheels.
FEATURES:
HARD ANODIZED MACHINED ALUMINUM THREADED LINKS:
The upper and lower suspension links as well as the steering tie rod and drag link are machined from aluminum to reduce flex and provide precise control over the roughest terrain. The tubes are threaded at both ends for easy assembly and they use larger and stronger M4 hardware.
HARD ANODIZED MACHINED ALUMINUM STEERING LINKS:
Our machined aluminum steering links give you more precise steering feel and response to help keep your rig pointed in the right direction. They’re hard anodized and use larger and stronger M4 hardware for durability.
LONG TRAVEL REAR SWAY BAR:
The pursuit of horsepower and the ability to put the power to the ground is one of the main aspects of offroad racing. This unique torsion bar design with long pivot arms used in conjunction with the long travel suspension is designed to help control the torque twist associated with massive power. This system also helps reduce body roll and adds stability at high speeds.
UNIVERSAL AXLES:
Our universal joint axles increase steering angle to 50 degrees, that's 60% over the stock dogbone/drive cup setup. Our universals provide smoother action for a higher performing, efficient drivetrain. The universal is oversized; a design you'd see on 1/8 scale vehicles and it's made of hardened steel so it's capable of handling extreme power.
• AR60 OCP universal axle set
• Up to 50 degrees of steering
• Smooth action for an efficient drivetrain
• Oversized design for durability
• Hardened steel construction
KING ADJUSTABLE MACHINED ALUMINUM SHOCKS:
The included aluminum King Shocks feature precision machined pistons which offer smooth performance throughout the range of travel. Made to tight tolerances, these aluminum shocks feature clear coated polished aluminum bodies, machined aluminum caps and aluminum preload spacers for precision shock adjustments. The rear shocks are mounted on the links rather than at the axle, allowing for more suspension travel which is better for high speed handling.
ALUMINUM LOWER LINK PLATES:
Includes hard anodized 2mm aluminum lower link plates for added durability and stiffness of the rear 4 link suspension.
2.2 WALKER EVANS RACING BEADLOCK WHEELS:
Officially licensed Walker Evans Racing beadlock wheels dressed in an aggressive all black style and they work with most 2.2 tires. Our IFD™ (Interchangeable Face Design) wheel system makes it easy to dress it up with a new look. The wheel design allows you to vary the amount of air passing through the breather holes. You can select between having one, two or three open holes (two, four or six total) by rotating the inner (beadlock) ring. The position is locked with reassembly.
• Three piece beadlock design
• Utilizes new 2x11mm pins for added strength
• Updated plastic hub adapter to eliminate slop and capture the new 2x11mm pin
• Adjustable breather holes for fine tuning tire performance
• Compatible with most 2.2 tires
• Easy six screw disassembly
BFGOODRICH® BAJA T/A® KR2 TIRES - R35 COMPOUND:
In the full-size world of off-road racing, BFGoodrich® tires have proven to be the ‘go-to’ tire for numerous racing victories, including Randy Slawson piloting them to victory at the 2013 and 2015 King of the Hammers. Axial’s version of this tire captures the same aggressive look and provides remarkable performance on a wide variety of surfaces. This is the perfect tire for this style of vehicle due to its high level of performance and diversity.
AR60 OCP-AXLE™:
The AR60 OCP-Axle™ is constructed from high strength composite material which has a low flex rate but is not as brittle as standard glass filled nylon. The combination of our axles and a true 4-link suspension gives you optimal performance for any terrain with the look of a real 1:1 vehicle.
• Off-center pumpkin design
• Axle tubes are reinforced with a boxed-in axle truss
• High strength composite material
• Updated steering knuckles for dual shear, also eliminates secondary bolt on plate
• Updated differential cover and servo mount for a new look
WB8 HD WILDBOAR™ DRIVESHAFTS, FRONT AND REAR:
The WB8 HD driveshafts feature an updated design with a larger diameter cross pin (2x11mm) along with an M4 Screw Shaft (2mm hex drive) for added strength. A center splined slider floats between each end and features added material which reduces flex and fatigue.
• 3-piece driveshaft with strengthened slider-floater tube.
• Increased surface at the connection between the ball joints and output shaft tubes.
• 2x11mm cross pin adds 25% more surface area providing more strength for the ball joint.
• Captured cross pin design eliminates older set screw design for more durability and easy maintenance.
MULTIPLE SHOCK/LINK POINTS AND DUAL SHEAR SHOCK MOUNTS:
We've included a variety of shock mounting points for running dual shock setups and for additional suspension tuning options. On the skid plate you'll find two front upper link mount positions and three rear upper link mount positions. All shock-mounting locations are dual shear with optional secondary shock mounts allowing for dual shock setups.
REALISTIC SCALE DETAILS:
Realistic scale details include molded driver figures, three pairs of helmets, molded shock reservoirs, a fuel cell, Bomber Fabrication body panels, two full color decal sheets with enough graphics for two completely unique looks, and a fully licensed scale tube chassis.
BFGoodrich® Tires and Baja T/A® KR2 Trademarks are used under License from Michelin
Odyssey Battery trademark(s) is/are the property of EnerSys and affiliates
NOTE: Prototype shown. Some imagery may differ from the actual product. Electronics shown are not included.
Another new 2022 Case B 2016 Toyota Tacoma found recently at Tesco. Best get in early to beat the expected hype of a casting many had thought had been permanently retired after its first release. A distinct lack of front detailing and lots of grey plastic has had me reaching for my Sharpie and Molotow pens on this example. Mint and boxed.
More Info: www.axialracing.com/t/vehicles/rr10
The RR10 Bomber build-it-yourself kit is loaded with features allowing you to customize it and add your own electronics for the ultimate rock racer! Building on the current, successful ready-to-run model, this kit version includes a wide variety of desirable option parts that deliver next level performance and durability. Hard anodized aluminum suspension links, hard anodized aluminum steering links, long travel rear sway bar, hardened steel universal axles allowing up to 50 degrees of steering, aluminum lower link plates, and King adjustable machined aluminum shocks, all riding on sticky BFGoodrich® Baja T/A® KR2 tires wrapped around 2.2 Walker Evans Racing beadlock wheels.
FEATURES:
HARD ANODIZED MACHINED ALUMINUM THREADED LINKS:
The upper and lower suspension links as well as the steering tie rod and drag link are machined from aluminum to reduce flex and provide precise control over the roughest terrain. The tubes are threaded at both ends for easy assembly and they use larger and stronger M4 hardware.
HARD ANODIZED MACHINED ALUMINUM STEERING LINKS:
Our machined aluminum steering links give you more precise steering feel and response to help keep your rig pointed in the right direction. They’re hard anodized and use larger and stronger M4 hardware for durability.
LONG TRAVEL REAR SWAY BAR:
The pursuit of horsepower and the ability to put the power to the ground is one of the main aspects of offroad racing. This unique torsion bar design with long pivot arms used in conjunction with the long travel suspension is designed to help control the torque twist associated with massive power. This system also helps reduce body roll and adds stability at high speeds.
UNIVERSAL AXLES:
Our universal joint axles increase steering angle to 50 degrees, that's 60% over the stock dogbone/drive cup setup. Our universals provide smoother action for a higher performing, efficient drivetrain. The universal is oversized; a design you'd see on 1/8 scale vehicles and it's made of hardened steel so it's capable of handling extreme power.
• AR60 OCP universal axle set
• Up to 50 degrees of steering
• Smooth action for an efficient drivetrain
• Oversized design for durability
• Hardened steel construction
KING ADJUSTABLE MACHINED ALUMINUM SHOCKS:
The included aluminum King Shocks feature precision machined pistons which offer smooth performance throughout the range of travel. Made to tight tolerances, these aluminum shocks feature clear coated polished aluminum bodies, machined aluminum caps and aluminum preload spacers for precision shock adjustments. The rear shocks are mounted on the links rather than at the axle, allowing for more suspension travel which is better for high speed handling.
ALUMINUM LOWER LINK PLATES:
Includes hard anodized 2mm aluminum lower link plates for added durability and stiffness of the rear 4 link suspension.
2.2 WALKER EVANS RACING BEADLOCK WHEELS:
Officially licensed Walker Evans Racing beadlock wheels dressed in an aggressive all black style and they work with most 2.2 tires. Our IFD™ (Interchangeable Face Design) wheel system makes it easy to dress it up with a new look. The wheel design allows you to vary the amount of air passing through the breather holes. You can select between having one, two or three open holes (two, four or six total) by rotating the inner (beadlock) ring. The position is locked with reassembly.
• Three piece beadlock design
• Utilizes new 2x11mm pins for added strength
• Updated plastic hub adapter to eliminate slop and capture the new 2x11mm pin
• Adjustable breather holes for fine tuning tire performance
• Compatible with most 2.2 tires
• Easy six screw disassembly
BFGOODRICH® BAJA T/A® KR2 TIRES - R35 COMPOUND:
In the full-size world of off-road racing, BFGoodrich® tires have proven to be the ‘go-to’ tire for numerous racing victories, including Randy Slawson piloting them to victory at the 2013 and 2015 King of the Hammers. Axial’s version of this tire captures the same aggressive look and provides remarkable performance on a wide variety of surfaces. This is the perfect tire for this style of vehicle due to its high level of performance and diversity.
AR60 OCP-AXLE™:
The AR60 OCP-Axle™ is constructed from high strength composite material which has a low flex rate but is not as brittle as standard glass filled nylon. The combination of our axles and a true 4-link suspension gives you optimal performance for any terrain with the look of a real 1:1 vehicle.
• Off-center pumpkin design
• Axle tubes are reinforced with a boxed-in axle truss
• High strength composite material
• Updated steering knuckles for dual shear, also eliminates secondary bolt on plate
• Updated differential cover and servo mount for a new look
WB8 HD WILDBOAR™ DRIVESHAFTS, FRONT AND REAR:
The WB8 HD driveshafts feature an updated design with a larger diameter cross pin (2x11mm) along with an M4 Screw Shaft (2mm hex drive) for added strength. A center splined slider floats between each end and features added material which reduces flex and fatigue.
• 3-piece driveshaft with strengthened slider-floater tube.
• Increased surface at the connection between the ball joints and output shaft tubes.
• 2x11mm cross pin adds 25% more surface area providing more strength for the ball joint.
• Captured cross pin design eliminates older set screw design for more durability and easy maintenance.
MULTIPLE SHOCK/LINK POINTS AND DUAL SHEAR SHOCK MOUNTS:
We've included a variety of shock mounting points for running dual shock setups and for additional suspension tuning options. On the skid plate you'll find two front upper link mount positions and three rear upper link mount positions. All shock-mounting locations are dual shear with optional secondary shock mounts allowing for dual shock setups.
REALISTIC SCALE DETAILS:
Realistic scale details include molded driver figures, three pairs of helmets, molded shock reservoirs, a fuel cell, Bomber Fabrication body panels, two full color decal sheets with enough graphics for two completely unique looks, and a fully licensed scale tube chassis.
BFGoodrich® Tires and Baja T/A® KR2 Trademarks are used under License from Michelin
Odyssey Battery trademark(s) is/are the property of EnerSys and affiliates
NOTE: Prototype shown. Some imagery may differ from the actual product. Electronics shown are not included.
It's sad when you see cool old stuff, just rotting away.
No one lives here, but all the stuff they had still does.
The old & true saying comes to mind... "you can't take it with you".
So give it to someone who will enjoy it for a while.... an so on!
Happy weekend! =)
The all-new, 3rd-gen F-150 Raptor features specially designed 35” or 37” BFGoodrich All-Terrain KO2 tires and the twin-turbo 3.5-liter EcoBoost V6 with upgraded turbos and a high-pressure exhaust gas recirculation system. Paired with the Ford-built 10-speed automatic transmission, the powertrain delivers better low-end torque, enables greater towing (8,200 pounds) and increased payload (1,400 pounds), a 500-mile-plus range, and an active valve dual exhaust system with throatier rumbles. Sorry, performance and power numbers have not been released, but the Raptor R will have a V8.
Full details = www.AutomotiveRhythms.com
More Info: www.axialracing.com/t/vehicles/rr10
The RR10 Bomber build-it-yourself kit is loaded with features allowing you to customize it and add your own electronics for the ultimate rock racer! Building on the current, successful ready-to-run model, this kit version includes a wide variety of desirable option parts that deliver next level performance and durability. Hard anodized aluminum suspension links, hard anodized aluminum steering links, long travel rear sway bar, hardened steel universal axles allowing up to 50 degrees of steering, aluminum lower link plates, and King adjustable machined aluminum shocks, all riding on sticky BFGoodrich® Baja T/A® KR2 tires wrapped around 2.2 Walker Evans Racing beadlock wheels.
FEATURES:
HARD ANODIZED MACHINED ALUMINUM THREADED LINKS:
The upper and lower suspension links as well as the steering tie rod and drag link are machined from aluminum to reduce flex and provide precise control over the roughest terrain. The tubes are threaded at both ends for easy assembly and they use larger and stronger M4 hardware.
HARD ANODIZED MACHINED ALUMINUM STEERING LINKS:
Our machined aluminum steering links give you more precise steering feel and response to help keep your rig pointed in the right direction. They’re hard anodized and use larger and stronger M4 hardware for durability.
LONG TRAVEL REAR SWAY BAR:
The pursuit of horsepower and the ability to put the power to the ground is one of the main aspects of offroad racing. This unique torsion bar design with long pivot arms used in conjunction with the long travel suspension is designed to help control the torque twist associated with massive power. This system also helps reduce body roll and adds stability at high speeds.
UNIVERSAL AXLES:
Our universal joint axles increase steering angle to 50 degrees, that's 60% over the stock dogbone/drive cup setup. Our universals provide smoother action for a higher performing, efficient drivetrain. The universal is oversized; a design you'd see on 1/8 scale vehicles and it's made of hardened steel so it's capable of handling extreme power.
• AR60 OCP universal axle set
• Up to 50 degrees of steering
• Smooth action for an efficient drivetrain
• Oversized design for durability
• Hardened steel construction
KING ADJUSTABLE MACHINED ALUMINUM SHOCKS:
The included aluminum King Shocks feature precision machined pistons which offer smooth performance throughout the range of travel. Made to tight tolerances, these aluminum shocks feature clear coated polished aluminum bodies, machined aluminum caps and aluminum preload spacers for precision shock adjustments. The rear shocks are mounted on the links rather than at the axle, allowing for more suspension travel which is better for high speed handling.
ALUMINUM LOWER LINK PLATES:
Includes hard anodized 2mm aluminum lower link plates for added durability and stiffness of the rear 4 link suspension.
2.2 WALKER EVANS RACING BEADLOCK WHEELS:
Officially licensed Walker Evans Racing beadlock wheels dressed in an aggressive all black style and they work with most 2.2 tires. Our IFD™ (Interchangeable Face Design) wheel system makes it easy to dress it up with a new look. The wheel design allows you to vary the amount of air passing through the breather holes. You can select between having one, two or three open holes (two, four or six total) by rotating the inner (beadlock) ring. The position is locked with reassembly.
• Three piece beadlock design
• Utilizes new 2x11mm pins for added strength
• Updated plastic hub adapter to eliminate slop and capture the new 2x11mm pin
• Adjustable breather holes for fine tuning tire performance
• Compatible with most 2.2 tires
• Easy six screw disassembly
BFGOODRICH® BAJA T/A® KR2 TIRES - R35 COMPOUND:
In the full-size world of off-road racing, BFGoodrich® tires have proven to be the ‘go-to’ tire for numerous racing victories, including Randy Slawson piloting them to victory at the 2013 and 2015 King of the Hammers. Axial’s version of this tire captures the same aggressive look and provides remarkable performance on a wide variety of surfaces. This is the perfect tire for this style of vehicle due to its high level of performance and diversity.
AR60 OCP-AXLE™:
The AR60 OCP-Axle™ is constructed from high strength composite material which has a low flex rate but is not as brittle as standard glass filled nylon. The combination of our axles and a true 4-link suspension gives you optimal performance for any terrain with the look of a real 1:1 vehicle.
• Off-center pumpkin design
• Axle tubes are reinforced with a boxed-in axle truss
• High strength composite material
• Updated steering knuckles for dual shear, also eliminates secondary bolt on plate
• Updated differential cover and servo mount for a new look
WB8 HD WILDBOAR™ DRIVESHAFTS, FRONT AND REAR:
The WB8 HD driveshafts feature an updated design with a larger diameter cross pin (2x11mm) along with an M4 Screw Shaft (2mm hex drive) for added strength. A center splined slider floats between each end and features added material which reduces flex and fatigue.
• 3-piece driveshaft with strengthened slider-floater tube.
• Increased surface at the connection between the ball joints and output shaft tubes.
• 2x11mm cross pin adds 25% more surface area providing more strength for the ball joint.
• Captured cross pin design eliminates older set screw design for more durability and easy maintenance.
MULTIPLE SHOCK/LINK POINTS AND DUAL SHEAR SHOCK MOUNTS:
We've included a variety of shock mounting points for running dual shock setups and for additional suspension tuning options. On the skid plate you'll find two front upper link mount positions and three rear upper link mount positions. All shock-mounting locations are dual shear with optional secondary shock mounts allowing for dual shock setups.
REALISTIC SCALE DETAILS:
Realistic scale details include molded driver figures, three pairs of helmets, molded shock reservoirs, a fuel cell, Bomber Fabrication body panels, two full color decal sheets with enough graphics for two completely unique looks, and a fully licensed scale tube chassis.
BFGoodrich® Tires and Baja T/A® KR2 Trademarks are used under License from Michelin
Odyssey Battery trademark(s) is/are the property of EnerSys and affiliates
NOTE: Prototype shown. Some imagery may differ from the actual product. Electronics shown are not included.
One of a set of cards from my personal collection. These were a promotional item by Rohm and Hass, the manufacturer of Plexiglas, to show how versatile and attractive Plexi can be for signage. This set came out in 1964 and was sheathed in a cardboard box with ancient heiroglyphic patterns.
An unassuming casting when placed next to the white hot fashionable JDM and Euro stuff Hot Wheels have been putting out recently but I still have plenty of time for good old U.S. Muscle Cars like this 1969 Dodge Charger 500. Its last BFGoodrich recolour took ages to find but this latest one can be found pretty much EVERYWHERE at the moment due to a lack of anything genuinely new at the moment.
A decent well proportioned casting with its stout angular styling and a beautifully finished paint job.
Bought from ASDA back in April. Mint and boxed.
The all-new, 3rd-gen F-150 Raptor features specially designed 35” or 37” BFGoodrich All-Terrain KO2 tires and the twin-turbo 3.5-liter EcoBoost V6 with upgraded turbos and a high-pressure exhaust gas recirculation system. Paired with the Ford-built 10-speed automatic transmission, the powertrain delivers better low-end torque, enables greater towing (8,200 pounds) and increased payload (1,400 pounds), a 500-mile-plus range, and an active valve dual exhaust system with throatier rumbles. Sorry, performance and power numbers have not been released, but the Raptor R will have a V8.
Full details = www.AutomotiveRhythms.com
Photos from SCORE & BitD (Best in the Desert) racing series including the 2007 Tecate/SCORE Baja 1000 and BitD Vegas to Reno.
Team drivers:
Roger Norman
Rhys Millen
Todd Clement
and others
www.myspace.com/normanmotorsports
www.youtube.com/normanmotorsports
Video by Lux Visuals:
Music by BLUSIRKUT:
Race Truck Sponsors:
Monster Energy Drink
BFGoodrich
Ion Earth
Vehicle Dynamix
and others
_______________________
SPECS:
Trophy Truck (3) (For Sale)
Chasis Builder - Nye Frank
Make - Ford
Body - F 150
Front Wheel Travel - 17 inches
Rear Wheel Travel - 30 inches
Engine Builder - Leon Patton
Engine Model - Ford aluminum block and heads
Fuel Injection - Motec
Displacement - 442 cubic inches
Horsepower - 750 @ 6,000 rpm
Lubrication - Drysump
Transmission - 3 speed with torque converter (Turbo 400)
Usable Fuel - 104 gallons
Tires - BF Goodrich Project TA's 37"
Wheels - KMC
Seat - Mastercraft
Lights - Hella HID's
Shocks - King
I first spotted this back in May 2011. Its now back and has been fitted with BFGoodrich Mud Terrain tyres... and mighty fine they look to.
Not your usual van, the rear diff, high ride height indicates it is a 4x4 variant. The missing high level rear lights indicated this had a previous life in some form of public duty.
A bit of Googling revealed that M317 NVU was owned by Greater Manchester Fire Service and was based in Eccles.
Ignore the VW badge on the grill, this really is a Talbot!
Insert photo courtesy of Norman Price, a larger photo can be seen on his website here:
www.fireflash-delta64.co.uk/ecclesarch.html
Another view can be seen here:
www.fire-engine-photos.com/picture/number2552.asp
Date of Liability: 01 07 2011
Date of First Registration: 19 09 1994
Year of Manufacture: 1994
Cylinder Capacity (cc) 2500CC
More Info: www.axialracing.com/t/vehicles/rr10
The RR10 Bomber build-it-yourself kit is loaded with features allowing you to customize it and add your own electronics for the ultimate rock racer! Building on the current, successful ready-to-run model, this kit version includes a wide variety of desirable option parts that deliver next level performance and durability. Hard anodized aluminum suspension links, hard anodized aluminum steering links, long travel rear sway bar, hardened steel universal axles allowing up to 50 degrees of steering, aluminum lower link plates, and King adjustable machined aluminum shocks, all riding on sticky BFGoodrich® Baja T/A® KR2 tires wrapped around 2.2 Walker Evans Racing beadlock wheels.
FEATURES:
HARD ANODIZED MACHINED ALUMINUM THREADED LINKS:
The upper and lower suspension links as well as the steering tie rod and drag link are machined from aluminum to reduce flex and provide precise control over the roughest terrain. The tubes are threaded at both ends for easy assembly and they use larger and stronger M4 hardware.
HARD ANODIZED MACHINED ALUMINUM STEERING LINKS:
Our machined aluminum steering links give you more precise steering feel and response to help keep your rig pointed in the right direction. They’re hard anodized and use larger and stronger M4 hardware for durability.
LONG TRAVEL REAR SWAY BAR:
The pursuit of horsepower and the ability to put the power to the ground is one of the main aspects of offroad racing. This unique torsion bar design with long pivot arms used in conjunction with the long travel suspension is designed to help control the torque twist associated with massive power. This system also helps reduce body roll and adds stability at high speeds.
UNIVERSAL AXLES:
Our universal joint axles increase steering angle to 50 degrees, that's 60% over the stock dogbone/drive cup setup. Our universals provide smoother action for a higher performing, efficient drivetrain. The universal is oversized; a design you'd see on 1/8 scale vehicles and it's made of hardened steel so it's capable of handling extreme power.
• AR60 OCP universal axle set
• Up to 50 degrees of steering
• Smooth action for an efficient drivetrain
• Oversized design for durability
• Hardened steel construction
KING ADJUSTABLE MACHINED ALUMINUM SHOCKS:
The included aluminum King Shocks feature precision machined pistons which offer smooth performance throughout the range of travel. Made to tight tolerances, these aluminum shocks feature clear coated polished aluminum bodies, machined aluminum caps and aluminum preload spacers for precision shock adjustments. The rear shocks are mounted on the links rather than at the axle, allowing for more suspension travel which is better for high speed handling.
ALUMINUM LOWER LINK PLATES:
Includes hard anodized 2mm aluminum lower link plates for added durability and stiffness of the rear 4 link suspension.
2.2 WALKER EVANS RACING BEADLOCK WHEELS:
Officially licensed Walker Evans Racing beadlock wheels dressed in an aggressive all black style and they work with most 2.2 tires. Our IFD™ (Interchangeable Face Design) wheel system makes it easy to dress it up with a new look. The wheel design allows you to vary the amount of air passing through the breather holes. You can select between having one, two or three open holes (two, four or six total) by rotating the inner (beadlock) ring. The position is locked with reassembly.
• Three piece beadlock design
• Utilizes new 2x11mm pins for added strength
• Updated plastic hub adapter to eliminate slop and capture the new 2x11mm pin
• Adjustable breather holes for fine tuning tire performance
• Compatible with most 2.2 tires
• Easy six screw disassembly
BFGOODRICH® BAJA T/A® KR2 TIRES - R35 COMPOUND:
In the full-size world of off-road racing, BFGoodrich® tires have proven to be the ‘go-to’ tire for numerous racing victories, including Randy Slawson piloting them to victory at the 2013 and 2015 King of the Hammers. Axial’s version of this tire captures the same aggressive look and provides remarkable performance on a wide variety of surfaces. This is the perfect tire for this style of vehicle due to its high level of performance and diversity.
AR60 OCP-AXLE™:
The AR60 OCP-Axle™ is constructed from high strength composite material which has a low flex rate but is not as brittle as standard glass filled nylon. The combination of our axles and a true 4-link suspension gives you optimal performance for any terrain with the look of a real 1:1 vehicle.
• Off-center pumpkin design
• Axle tubes are reinforced with a boxed-in axle truss
• High strength composite material
• Updated steering knuckles for dual shear, also eliminates secondary bolt on plate
• Updated differential cover and servo mount for a new look
WB8 HD WILDBOAR™ DRIVESHAFTS, FRONT AND REAR:
The WB8 HD driveshafts feature an updated design with a larger diameter cross pin (2x11mm) along with an M4 Screw Shaft (2mm hex drive) for added strength. A center splined slider floats between each end and features added material which reduces flex and fatigue.
• 3-piece driveshaft with strengthened slider-floater tube.
• Increased surface at the connection between the ball joints and output shaft tubes.
• 2x11mm cross pin adds 25% more surface area providing more strength for the ball joint.
• Captured cross pin design eliminates older set screw design for more durability and easy maintenance.
MULTIPLE SHOCK/LINK POINTS AND DUAL SHEAR SHOCK MOUNTS:
We've included a variety of shock mounting points for running dual shock setups and for additional suspension tuning options. On the skid plate you'll find two front upper link mount positions and three rear upper link mount positions. All shock-mounting locations are dual shear with optional secondary shock mounts allowing for dual shock setups.
REALISTIC SCALE DETAILS:
Realistic scale details include molded driver figures, three pairs of helmets, molded shock reservoirs, a fuel cell, Bomber Fabrication body panels, two full color decal sheets with enough graphics for two completely unique looks, and a fully licensed scale tube chassis.
BFGoodrich® Tires and Baja T/A® KR2 Trademarks are used under License from Michelin
Odyssey Battery trademark(s) is/are the property of EnerSys and affiliates
NOTE: Prototype shown. Some imagery may differ from the actual product. Electronics shown are not included.
Bob Wollek / Derek Bell / John Andretti Miller BF Goodrich Busby Racing Porsche 962C IMSA.
All of photographs published here are copyright © Anthony Fosh All Rights Reserved. They may not be reproduced and/or used in any form of publication, print or the Internet without my written permission
BFG keeps the action going with the Nation of GO Tour.
If you have a passion for all things automotive, you belong at the Nation of GO. Join our new community to drive, share and connect online like never before.
The all-new, 3rd-gen F-150 Raptor features specially designed 35” or 37” BFGoodrich All-Terrain KO2 tires and the twin-turbo 3.5-liter EcoBoost V6 with upgraded turbos and a high-pressure exhaust gas recirculation system. Paired with the Ford-built 10-speed automatic transmission, the powertrain delivers better low-end torque, enables greater towing (8,200 pounds) and increased payload (1,400 pounds), a 500-mile-plus range, and an active valve dual exhaust system with throatier rumbles. Sorry, performance and power numbers have not been released, but the Raptor R will have a V8.
Full details = www.AutomotiveRhythms.com
ANRKY Wheels
Brabus Widestar
MercedesBenz G63
AN35 SeriesTHREE
20x11
Satin Black Center
Gloss Black Lip/Inner
Shop: Tag Motorsports
Front
18x8.5" et35 FL-5 wheels in anthracite
BFG G-Force R1 245/35/18
Rear
18x9.5" et35 FL-5 wheels in anthracite
BFG G-Force R1 275/40/18
Owner:
The all-new, 3rd-gen F-150 Raptor features specially designed 35” or 37” BFGoodrich All-Terrain KO2 tires and the twin-turbo 3.5-liter EcoBoost V6 with upgraded turbos and a high-pressure exhaust gas recirculation system. Paired with the Ford-built 10-speed automatic transmission, the powertrain delivers better low-end torque, enables greater towing (8,200 pounds) and increased payload (1,400 pounds), a 500-mile-plus range, and an active valve dual exhaust system with throatier rumbles. Sorry, performance and power numbers have not been released, but the Raptor R will have a V8.
Full details = www.AutomotiveRhythms.com
1989 Miller Beer/BFGoodrich Porsche 962. Winner 24 Hours of Daytona Bob Wollek, Derek Bell, John Andretti. It recently sold for $2.2 million.
BFG keeps the action going with the Nation of GO Tour.
If you have a passion for all things automotive, you belong at the Nation of GO. Join our new community to drive, share and connect online like never before.
More Info: www.axialracing.com/t/vehicles/rr10
The RR10 Bomber build-it-yourself kit is loaded with features allowing you to customize it and add your own electronics for the ultimate rock racer! Building on the current, successful ready-to-run model, this kit version includes a wide variety of desirable option parts that deliver next level performance and durability. Hard anodized aluminum suspension links, hard anodized aluminum steering links, long travel rear sway bar, hardened steel universal axles allowing up to 50 degrees of steering, aluminum lower link plates, and King adjustable machined aluminum shocks, all riding on sticky BFGoodrich® Baja T/A® KR2 tires wrapped around 2.2 Walker Evans Racing beadlock wheels.
FEATURES:
HARD ANODIZED MACHINED ALUMINUM THREADED LINKS:
The upper and lower suspension links as well as the steering tie rod and drag link are machined from aluminum to reduce flex and provide precise control over the roughest terrain. The tubes are threaded at both ends for easy assembly and they use larger and stronger M4 hardware.
HARD ANODIZED MACHINED ALUMINUM STEERING LINKS:
Our machined aluminum steering links give you more precise steering feel and response to help keep your rig pointed in the right direction. They’re hard anodized and use larger and stronger M4 hardware for durability.
LONG TRAVEL REAR SWAY BAR:
The pursuit of horsepower and the ability to put the power to the ground is one of the main aspects of offroad racing. This unique torsion bar design with long pivot arms used in conjunction with the long travel suspension is designed to help control the torque twist associated with massive power. This system also helps reduce body roll and adds stability at high speeds.
UNIVERSAL AXLES:
Our universal joint axles increase steering angle to 50 degrees, that's 60% over the stock dogbone/drive cup setup. Our universals provide smoother action for a higher performing, efficient drivetrain. The universal is oversized; a design you'd see on 1/8 scale vehicles and it's made of hardened steel so it's capable of handling extreme power.
• AR60 OCP universal axle set
• Up to 50 degrees of steering
• Smooth action for an efficient drivetrain
• Oversized design for durability
• Hardened steel construction
KING ADJUSTABLE MACHINED ALUMINUM SHOCKS:
The included aluminum King Shocks feature precision machined pistons which offer smooth performance throughout the range of travel. Made to tight tolerances, these aluminum shocks feature clear coated polished aluminum bodies, machined aluminum caps and aluminum preload spacers for precision shock adjustments. The rear shocks are mounted on the links rather than at the axle, allowing for more suspension travel which is better for high speed handling.
ALUMINUM LOWER LINK PLATES:
Includes hard anodized 2mm aluminum lower link plates for added durability and stiffness of the rear 4 link suspension.
2.2 WALKER EVANS RACING BEADLOCK WHEELS:
Officially licensed Walker Evans Racing beadlock wheels dressed in an aggressive all black style and they work with most 2.2 tires. Our IFD™ (Interchangeable Face Design) wheel system makes it easy to dress it up with a new look. The wheel design allows you to vary the amount of air passing through the breather holes. You can select between having one, two or three open holes (two, four or six total) by rotating the inner (beadlock) ring. The position is locked with reassembly.
• Three piece beadlock design
• Utilizes new 2x11mm pins for added strength
• Updated plastic hub adapter to eliminate slop and capture the new 2x11mm pin
• Adjustable breather holes for fine tuning tire performance
• Compatible with most 2.2 tires
• Easy six screw disassembly
BFGOODRICH® BAJA T/A® KR2 TIRES - R35 COMPOUND:
In the full-size world of off-road racing, BFGoodrich® tires have proven to be the ‘go-to’ tire for numerous racing victories, including Randy Slawson piloting them to victory at the 2013 and 2015 King of the Hammers. Axial’s version of this tire captures the same aggressive look and provides remarkable performance on a wide variety of surfaces. This is the perfect tire for this style of vehicle due to its high level of performance and diversity.
AR60 OCP-AXLE™:
The AR60 OCP-Axle™ is constructed from high strength composite material which has a low flex rate but is not as brittle as standard glass filled nylon. The combination of our axles and a true 4-link suspension gives you optimal performance for any terrain with the look of a real 1:1 vehicle.
• Off-center pumpkin design
• Axle tubes are reinforced with a boxed-in axle truss
• High strength composite material
• Updated steering knuckles for dual shear, also eliminates secondary bolt on plate
• Updated differential cover and servo mount for a new look
WB8 HD WILDBOAR™ DRIVESHAFTS, FRONT AND REAR:
The WB8 HD driveshafts feature an updated design with a larger diameter cross pin (2x11mm) along with an M4 Screw Shaft (2mm hex drive) for added strength. A center splined slider floats between each end and features added material which reduces flex and fatigue.
• 3-piece driveshaft with strengthened slider-floater tube.
• Increased surface at the connection between the ball joints and output shaft tubes.
• 2x11mm cross pin adds 25% more surface area providing more strength for the ball joint.
• Captured cross pin design eliminates older set screw design for more durability and easy maintenance.
MULTIPLE SHOCK/LINK POINTS AND DUAL SHEAR SHOCK MOUNTS:
We've included a variety of shock mounting points for running dual shock setups and for additional suspension tuning options. On the skid plate you'll find two front upper link mount positions and three rear upper link mount positions. All shock-mounting locations are dual shear with optional secondary shock mounts allowing for dual shock setups.
REALISTIC SCALE DETAILS:
Realistic scale details include molded driver figures, three pairs of helmets, molded shock reservoirs, a fuel cell, Bomber Fabrication body panels, two full color decal sheets with enough graphics for two completely unique looks, and a fully licensed scale tube chassis.
BFGoodrich® Tires and Baja T/A® KR2 Trademarks are used under License from Michelin
Odyssey Battery trademark(s) is/are the property of EnerSys and affiliates
NOTE: Prototype shown. Some imagery may differ from the actual product. Electronics shown are not included.