View allAll Photos Tagged UtilityVehicle

 

Redesigned in 2018 from the ground up, one of the latest Jeep Wranglers for 2021 is a plug-in electric variant dubbed the 4xe to bring the American icon up-to-speed with green energy expectations. As the proud owner of three prior Wranglers, and my current 2016 Unlimited, I enjoy the “spirit of adventure” Wranglers offer and the unequivocal go-anywhere and self-assurance they present. And now, I can partake in Jeep group activities with more planetary consciousness.

 

Photographed at The Vintage Times Street Rod Club 38th Annual Rod Run in Springfield, Illinois on September 1, 2012.

 

Please visit my collection of Motor Vehicles on Flickr where you will find more than 10,000 photographs thoughtfully organized into albums, and presented by model year, manufacturer, vehicle type, and more. This project, which began in 2008, continues to expand with new material added daily.

"You know, if one goes out, the whole thing won't work."

 

Now someone has to personally check each one, and they're running out of time.

 

Baynard County ConServ

Driftwood Road

Mystic Beach

 

Olympus OM-D E-M5 Mark II

Olympus M.14-42mm F3.5-5.6 II R

 

For more info about the dioramas, check out the FAQ: 1stPix FAQ

Motorcar Tv 210-M 3045 (Type: Ty 210 - Gold Eagle). A utility vehicle. (

Photographed at Press Preview Day at the Illinois State Fair in Springfield on August 4, 2011.

 

Please visit my collection of Motor Vehicles on Flickr where you will find more than 10,000 photographs thoughtfully organized into albums, and presented by model year, manufacturer, vehicle type, and more. This project, which began in 2008, continues to expand with new material added daily.

 

Redesigned in 2018 from the ground up, one of the latest Jeep Wranglers for 2021 is a plug-in electric variant dubbed the 4xe to bring the American icon up-to-speed with green energy expectations. As the proud owner of three prior Wranglers, and my current 2016 Unlimited, I enjoy the “spirit of adventure” Wranglers offer and the unequivocal go-anywhere and self-assurance they present. And now, I can partake in Jeep group activities with more planetary consciousness.

 

 

Redesigned in 2018 from the ground up, one of the latest Jeep Wranglers for 2021 is a plug-in electric variant dubbed the 4xe to bring the American icon up-to-speed with green energy expectations. As the proud owner of three prior Wranglers, and my current 2016 Unlimited, I enjoy the “spirit of adventure” Wranglers offer and the unequivocal go-anywhere and self-assurance they present. And now, I can partake in Jeep group activities with more planetary consciousness.

 

 

Redesigned in 2018 from the ground up, one of the latest Jeep Wranglers for 2021 is a plug-in electric variant dubbed the 4xe to bring the American icon up-to-speed with green energy expectations. As the proud owner of three prior Wranglers, and my current 2016 Unlimited, I enjoy the “spirit of adventure” Wranglers offer and the unequivocal go-anywhere and self-assurance they present. And now, I can partake in Jeep group activities with more planetary consciousness.

 

 

Redesigned in 2018 from the ground up, one of the latest Jeep Wranglers for 2021 is a plug-in electric variant dubbed the 4xe to bring the American icon up-to-speed with green energy expectations. As the proud owner of three prior Wranglers, and my current 2016 Unlimited, I enjoy the “spirit of adventure” Wranglers offer and the unequivocal go-anywhere and self-assurance they present. And now, I can partake in Jeep group activities with more planetary consciousness.

 

Photographed at the First Annual New Salem Shrine Club Car Show in Petersburg, Illinois on September 15, 2012.

 

Please visit my collection of Motor Vehicles on Flickr where you will find more than 10,000 photographs thoughtfully organized into albums, and presented by model year, manufacturer, vehicle type, and more. This project, which began in 2008, continues to expand with new material added daily.

 

Redesigned in 2018 from the ground up, one of the latest Jeep Wranglers for 2021 is a plug-in electric variant dubbed the 4xe to bring the American icon up-to-speed with green energy expectations. As the proud owner of three prior Wranglers, and my current 2016 Unlimited, I enjoy the “spirit of adventure” Wranglers offer and the unequivocal go-anywhere and self-assurance they present. And now, I can partake in Jeep group activities with more planetary consciousness.

 

This Push Broom Attachment is on a 3450 UTV sweeping the parking lot.

 

(1941-1945) WILLYS MB

 

One of the first mass-produced military vehicles in the United States, the Willys MB (and Ford GPW) U.S Army Jeep is the culmination of war-time ingenuity, standardization and strategic personalization for transport of personnel and cargo. Soon to become the ubiquitous, ''world-famous'' Jeep, the Willys MB and Ford GPW models were very effective on the ground, with many standardized features such as 6.00x16 tyres, 60 honest horsepower at 4,000rpm, a gasoline can bracket on the left rear, provisions for trailer lights, spark interference suppression, a blackout light system, twin top bows and sealed spring shackles.

 

Prior to the production of the MB/GPW, other attempts were made to satisfy the Army's need for a Light Utility Vehicle including the first prototype presented by the American Bantam Car Company. Nicknamed the ''Blitz Buggy'' this vehicle concept which was the first bid accepted by the Army, as it satisfied the Army’s Ordnance Technical Committee specifications that the vehicle has:

▪︎Four-wheel drive.

▪︎Crew of three.

▪︎A wheelbase of no more than 75in and tracks no more than 47in.

▪︎A fold-down windshield.

▪︎A 660lb payload.

▪︎An engine capable of 85 ft lb of torque.

▪︎With an empty weight of no more than 1,300lbs. (590 kg).

 

While the ''Blitz Buggy'' did satisfy these requirements, Bantam was not able to deliver with the fiscal strength or production capability needed to win the contract with the War Department. As as result, Ford and Willys were asked to product their own pilot models for testing, the results of which would determine the contract. The original pilot models were submitted and named accordingly. The Willys Quad by Willys Overland, the Ford Pygmy by Ford and the BRC 60 by Bantam were accepted and orders were given for 1,500 units per company, with a revised weight limit of 2,160Ib. During these pre-production runs, each vehicle was re-named. The Willys Quad became the “MA”, the Ford Pygmy became the “GP”, and the “BRC 60” became the “BRC 40”. By July of 1941, the War Department, needing standardization, selected Willys-Overland to fulfill its contract, on account of the MA’s powerful engine, silhouette, low bid ($748.74/unit), and because of the company’s ability to fulfill production needs, ordering another 16,000 vehicles.

 

Absorbing some of the design features of the Bantam and Ford entries, the Willys “MA” was then renamed the Willys “MB”, and featured the powerful “Go Devil” engine and a welded flat iron “slat” radiator grille (which was later replaced by a stamped grille in March of 1942). By October 1941, due to an increased demand for production, Ford was contracted to assist Willys-Overland and changed their model’s name from “GP to “GPW”, with the "W" referring to the "Willys" licensed design. During World War Two, Ford produced some 280,000 of these vehicles.

 

The MA and early MB's had the “Willys” name stamped into the left rear panel; however, in the spring of 1942, the War Dept. decided not to feature the logo and removed them. Early MB's had a wiper for each side of the windshield, which were hand operated in contrast to later configurations. The windshields also varied slightly. The first 3,500 produced used an MA-type frame, which had a shorter distance between the cowl and the glass frames (4in) The later models had a 6in measurement, and were noticeably taller. In the earlier model MB's, the gas tank still had rectangular lower corners, as opposed to later versions.

 

While earlier black-out lamps for the MB were used as aids to see other vehicles in the convoy, later MB's feature a large blackout headlamp mounted on the left front fender that was used to help the driver see where he was going. The headlamps on all World War Two Willys MB and Ford GPW Jeeps hinged up so they could illuminate the engine compartment in dark times. In 1942 the MB Jeeps got combat wheels, replacing the original stamped and welded version. Combat wheels were heavier and bolted together to facilitate field repair, and also had the ability to transport the vehicle for a distance with deflated tires. All jeeps had brackets for their pioneer tools mounted on the left side below the entryway.

 

Rounded rear corners were found on the bodies of all the production Jeeps, both Willys MB and Ford GPW models. All models also featured larger bumperettes, exterior handles for manual extrication from sticky terrain, and two top bows to raise the height of the canvas and keep it from pounding the heads of the front seat occupants. The instrument panels began to look more militarized on the MB and GPW. Instruments were separate (oil pressure, fuel level, ammeter, water temperature, speedometer) had black faces, and were externally illuminated. The in-out lever for the front differential, and the transfer case lever, were on the right side of the transmission lever, as those components had migrated from the left side on the Bantams to the right side on the production models.

 

Sourced from www.kaiserwillys.com/about_willys_jeep_mb_history_specs

 

Redesigned in 2018 from the ground up, one of the latest Jeep Wranglers for 2021 is a plug-in electric variant dubbed the 4xe to bring the American icon up-to-speed with green energy expectations. As the proud owner of three prior Wranglers, and my current 2016 Unlimited, I enjoy the “spirit of adventure” Wranglers offer and the unequivocal go-anywhere and self-assurance they present. And now, I can partake in Jeep group activities with more planetary consciousness.

 

The Ural-375 is a General Purpose 4.5 ton 6x6 Truck, which has been produced at the Ural Automotive Plant in the Russian SFSR since 1961. The Ural-375 replaced the ZIL-157 as the standard Soviet Army truck in 1979. It was itself replaced by the Ural-4320. The Ural-375 was used, for example, as a platform for the BM-21 Grad Rocket Launcher, Troop Carrier, and as a Supply Carrier. The Ural-375 comes in a variety of models, the list is very exhaustive:

 

▪︎Ural-375 - Base model, it has a canvas roof, and no steel cabin.

▪︎Ural-375A - The same but has a slightly longer chassis.

▪︎Ural-375D - The most produced 375, which has a proper all-steel cabin.

▪︎Ural-375E KET-L - Recovery Vehicle equipped with a front-mounted and a rear-mounted winch along with a jib crane.

▪︎Ural-375S - 6x6 Tractor Unit.

▪︎Ural-377 - A 6x4 civilian truck.

▪︎Ural-377S - 6x4 Tractor Unit

▪︎Ural-375DM - Modernized version of the Ural-375D, built at least until 1991.

 

General characteristics:

 

▪︎Manufacturer: Ural Automobile Plant, Miass

▪︎Production: 1961 to 1964 (Ural-375) / 1964 to 1983 (Ural-375D) / 1982 to -1991 (Ural-375DM)

▪︎Production End: 1993

▪︎Powerplant: ZIL-375Ya 7.0 litre V8 petrol (carburetor) pushrod engine, 174hp

▪︎Transmission: 5-speed manual + 2-speed transfer case

▪︎Length: 24ft 1in) / Width: 9ft 8.5in / Height: 9ft 9in (with tarpaulin)

▪︎Curb Weight: 8.3 tons

▪︎Predecessor: Ural-355M

▪︎Successor: Ural-4320

▪︎Crew: 3 or more

▪︎Payload: 4.7 tons

▪︎Maximum Permissible Mass: 13 tons

▪︎Suspension: Live beam axles, leaf springs

▪︎Gearbox: 5x2 speed gearbox

▪︎Maximum Speed: 47 mph

▪︎Brakes: Pneumatic drum brakes

▪︎Fording depth: 4ft 11in

▪︎Ground Clearance: 1ft 3in

▪︎Fuel Capacity: tank: 65 gallons + 13 gallons

▪︎Fuel Economy: 4.7 to 5.2 mpg.

  

Tropospheric Scatter, also known as ''Troposcatter'' is a method of communicating with microwave radio signals over considerable distances, 310 miles and further depending on frequency of operation, equipment type, terrain, and climate factors. This method of propagation uses the tropospheric scatter phenomenon, where radio waves at UHF and SHF frequencies are randomly scattered as they pass through the upper layers of the troposphere. Radio signals are transmitted in a narrow beam aimed just above the horizon in the direction of the receiver station. As the signals pass through the troposphere, some of the energy is scattered back toward the Earth, allowing the receiver station to pick up the signal.

 

Normally, signals in the microwave frequency range travel in straight lines, and so are limited to line-of-sight applications, in which the receiver can be 'seen' by the transmitter. Communication distances are limited by the visual horizon to around 30 to 40 miles. Troposcatter allows microwave communication beyond the horizon. It was developed in the 1950's and used for military communications until communications satellites largely replaced it in the 1970's. Because the troposphere is turbulent and has a high proportion of moisture, the tropospheric scatter radio signals are refracted and consequently only a tiny proportion of the transmitted radio energy is collected by the receiving antennas. Frequencies of transmission around 2 GHz are best suited for tropospheric scatter systems as at this frequency the wavelength of the signal interacts well with the moist, turbulent areas of the troposphere, improving signal-to-noise ratios.

  

Sourced from:

 

en.m.wikipedia.org/wiki/Tropospheric_scatter

 

Sourced from en.m.wikipedia.org/wiki/Ural-375

Trailers are a handy way to lighten your load, this 3400 Utility Vehicle shows the versatility.

 

Land Rover 110 Defender 4x4 Utility Vehicle

 

The British Land Rover, one of the most influential and much-loved British vehicles of all time, was launched in 1948 and remained in production with much the same basic specification until 1983 when the Series III 109 inch was replaced by a new One-Ten model (110 inch wheelbase). The traditional Land Rover body shape remained but coil springs, introduced in the new Range Rover, replaced the long-lived leaf spring suspension, and the four cylinder engines were fitted with an all-synchromesh five speed gearbox. In 1984 the coil spring Ninety (with a wheelbase just short of 93 inches) fitted with a four cylinder engine was introduced. A V8-powered version appeared the following year and in 1986 a new 85bhp, 2495cc turbo-diesel engine became available, then in 1990 the Ninety and One-Ten range was renamed Defender 90, 110 and 130. Not surprisingly the new Land Rovers proved popular for Military use and UK Ministry of Defence.

 

Land Rover has a range of specialised Defence Vehicles including the Defender FFR (Fitted for Radio) model, a platform to provide modern Defence Forces with a flexible and highly-mobile range of Command, Control, Communications, Computers and Intelligence (C4i) roles. The vehicle combines an upgraded dual-voltage power supply and full electrical suppression with the acclaimed all-terrain performance of the Land Rover Defender. It is capable of transporting sensitive electronic equipment safely through challenging conditions in support of C4i operations, and is also effective as a carrier of electronic surveillance and electronic counter-measures technology.

 

To support the power demands of the latest electronic equipment, the new Defender FFR features a new electrical architecture with a dual 12v / 24v power supply, replacing the 24v system of the previous model. The total output is raised from 100 amps to 280 amps, enabling a significant increase in the amount of C4i equipment that can be operated. Two high-output 12v glass mat, air-transportable military specification batteries are fitted, giving improved engine cranking at lower temperatures. The batteries are now stowed under the rear floor, releasing extra space in rear body for equipment. All of the Defender FFR’s electrical systems are fully suppressed in accordance with the most stringent test standards (including Def Stan 59-411 Class A and Mil Std 461F) enabling C4i equipment to be installed without further suppression work.

 

The operational performance of the Defender FFR is further enhanced by the standardisation of a heavy duty 3500kg chassis, providing improved payload capability, and the fitment of a new 90kW 2.4-litre diesel engine which offers over 35% more torque than the previous model.

Additional improvements include a more spacious and efficient driving environment with a new ergonomic dashboard design, and a foldable forward-facing radio operator’s seat with integral headrest and 3-point safety belt for improved comfort and safety.

  

Sources from :

  

www.classicdriver.com/en/car/land-rover/defender/1987/691401

 

www.army-technology.com/contractors/vehicles/land-rover/p...

The Willys MD, formally the M38A1 Truck, Utility: 1/4 ton, 4x4, or the G‑758 by its U.S Army Standard Nomenclature supply catalog designation, was a four-wheel drive, military light utility vehicle, made by Willys and Willys Motors / Kaiser Jeep from 1952 to 1971. It was widely procured by the U.S Military from 1952 until 1957, after which U.S purchases were reduced to the U.S Marine Corps, the Marine version had minor differences from the units used by other branches.

 

The MD was the first Willys Jeep with a significantly restyled body, immediately recognizable by its rounded hood and fenders. It formed the basis for the civilian and commercial Jeep CJ‑5, built for three decades (1954 to 1983) and subsequent models, and called the first 'round-fendered' Jeep. Although hard doors were still not available, the soft-top could be complemented with soft side panels and little hinged doors, that consisted of a thin steel frame with cloth and plastic window. For the U.S Army, the MD was replaced by the Ford M151 Jeep, from 1960. Low volume production of M38A1's for export to friendly foreign governments continued through 1971. Production totalled 101,488 units (80,290 domestic / 21,198 foreign sales) M38A1 Jeeps saw extensive service during the Korean War, Vietnam War and several other conflicts.

 

The M38A1 / MD was the second post-war evolution of the World War Two Willys MB Jeep (after the M38 or MC, F engine Prototypes) and the first Willys Jeep to feature the new rounded fenders and hood body design that would become the distinguishing body style of the 1955 CJ‑5, and which was carried through for decades on the CJ‑6, CJ‑7 and CJ‑8 Jeeps. The M38A1's wheelbase grew by a single inch, and overall length by some 6 inch. The M38A1 was the first Army Jeep to use the Willys Hurricane F-Head 134 inline-four engine. This engine was taller than the ''Go-Devil'' engine that powered the World War Two era Jeeps and the M38, and was the reason for restyling the body over the higher power plant. Otherwise, the MD had a T-90 3-speed transmission, Dana 18 transfer case, either the Dana 25 or the Dana 27 front axle, and Dana 44 rear axle.

 

General characteristics:

 

▪︎Manufacturer: Willys 1952–1953 / Willys Motors - Kaiser Jeep 1953–1971 / NEKAF 1955–1962 / Sherkat-Sahami (Iran) / Kia (South Korea) / Keohwa, Ltd. (now SsangYong Motor, South Korea) 1974–1984

▪︎Also Called: Willys MD

▪︎Production: 1952 to 1971

▪︎Body Style: 2-door SUV

▪︎Layout: Front-engine, four-wheel-drive

▪︎Related to: Jeep CJ-5 / Jeep DJ-5

▪︎Engine: 2.20 litre Hurricane I4 (gasoline)

▪︎Transmission: 3-speed Borg-Warner T-90 manual

▪︎Wheelbase: 6 ft 9 in

▪︎Length: 11 ft 6 in

▪︎Width: 5 ft 0.5 in (body)

▪︎Height: 6ft 1 in (with top up, reducible to 56 1⁄4 in

▪︎Curb Weight: 2,660 lb

▪︎Predecessor: Willys M38

▪︎Successor: Ford M151.

 

Information sourced from:

en.m.wikipedia.org/wiki/Willys_M38A1

This off-road vehicle was primarily produced to meet the British Army's requirement for a Gun Tractor, and was designed to tow a Field Gun (L118 Light Gun) with a ton of Ammunition and other equipment in the rear load space, giving it the alternative name of the Land Rover ''One Tonne'' the vehicle was designed to be easily transported by air, the positioning of the 3.5 litre Rover V8 engine beneath and to the rear of the cab eliminates the bonnet at the front, making the vehicle more or less cuboid thus reducing unused space in Transport Aircraft. Of concern was the payload and limited stability, particularly when crossing an incline.

 

The official name of ''101 Forward Control'' is derived from the vehicle's 101 inch wheelbase, and the position of the driver, above and slightly in front of the front wheels which used a fairly large 9.00 x 16in tyre. To cope with the extra height above the ground, the wheels feature an unusual feature for a Land Rover (but used for many years on the much older and similar Mercedes Unimog S404) a flange around the centre of the wheel has an embossed tread pattern forming a step for the crew when entering the cab, named a 'wheel-step'.

Development of the 101 Forward Control started in 1967, with a design team led by Norman Busby (14th October 1931 to 30th June 2005). Production took place between 1972 and 1978, in common practice of the Armed Forces, many vehicles were not used for some years and it is not unheard of for Military Vehicle enthusiasts to pick up these vehicles after only a few thousand miles service. All the vehicles produced at the Land Rover factory at Lode Lane, Solihull were soft top ('rag top') General Service Gun Tractors, although later on many were rebuilt with hard-top Ambulance bodies and as Radio Communication Trucks. A rare variant is the Electronic Warfare Vampire body, it is thought that only 21 of these were produced and less than half of these survive today.

 

The 101 Forward Control also served with the RAF Regiment, two 101's were allocated to each Rapier Missile set up, the British RAF Rapier System used three Land Rovers in deployment, a 24V winch fitted 101 Firing Unit Tractor (FUT) to tow the Launch Trailer, loaded with four Rapier Missiles, Guidance Equipment and radio, a 12V winch fitted 101 Tracking Radar Tractor (TRT) to tow the Blindfire Radar Trailer, also loaded with four Rapier Missiles and Guidance Equipment, and a 109 Land Rover to tow a Reload Trailer with 9 Rapier Missiles and loaded with the unit's other supplies and kit.

 

The 101 Forward Control also served in the Ambulance role, the Ambulance bodywork was built by Marshall of Cambridge, and was manufactured in both left and right hand drive with either 12 or 24 volt electrical systems. Some 101 Forward Control's were produced with a PTO powered Nokken capstan winch mounted on the chassis at the centre of the vehicle, allowing winching from either the front or rear. Another variation on a small number of pre-production vehicles was the addition of a trailer with an axle driven from the PTO, creating a 6x6 vehicle, this adaptation was abandoned before full production when it was discovered that the trailer had a propensity to push the vehicle onto its side when driven over rough terrain.

 

By the late 1990's, the 101 Forward Control's were decommissioned by the MoD and were replaced with Defenders and Pinzgauer Vehicles. Many 101's have entered into private ownership and there is a thriving 'Owners Club' supporting these sourcing spares and providing technical support the club also keeps a register of known surviving vehicles throughout the world. A prototype 101 was built based on a Recovery Vehicle, but only one of these is known to be in existence, at the Heritage Motor Centre in Gaydon, Warwickshire.

  

VEHICLE DETAILS -

 

GENERAL -

 

▪︎Nationality - British

▪︎Manufacture - Land Rover

▪︎Year of manufacture - 1976

▪︎Model- Forward Control

▪︎Use- Ambulance.

 

TECHNICAL -

 

▪︎Engine make - Rover 3.5 litre

▪︎Number of cylinders - 8

▪︎Fuel - Petrol / LPG

▪︎Cooling - Water cooled

▪︎Gearbox - 4 manual with selectable high / low

▪︎Wheel drive - Permanent 4WD

▪︎Tyre size - 900 x 16 in.

 

HISTORY -

 

Served with the British Army in the first Gulf War. (information from RPI Engineering)

  

Sourced from Wikipedia en.m.wikipedia.org/wiki/Land_Rover_101_Forward_Control

(1941-1945) WILLYS MB

 

One of the first mass-produced military vehicles in the United States, the Willys MB (and Ford GPW) U.S Army Jeep is the culmination of war-time ingenuity, standardization and strategic personalization for transport of personnel and cargo. Soon to become the ubiquitous, ''world-famous'' Jeep, the Willys MB and Ford GPW models were very effective on the ground, with many standardized features such as 6.00x16 tyres, 60 honest horsepower at 4,000rpm, a gasoline can bracket on the left rear, provisions for trailer lights, spark interference suppression, a blackout light system, twin top bows and sealed spring shackles.

 

Prior to the production of the MB/GPW, other attempts were made to satisfy the Army's need for a Light Utility Vehicle including the first prototype presented by the American Bantam Car Company. Nicknamed the ''Blitz Buggy'' this vehicle concept which was the first bid accepted by the Army, as it satisfied the Army’s Ordnance Technical Committee specifications that the vehicle has:

▪︎Four-wheel drive.

▪︎Crew of three.

▪︎A wheelbase of no more than 75in and tracks no more than 47in.

▪︎A fold-down windshield.

▪︎A 660lb payload.

▪︎An engine capable of 85 ft lb of torque.

▪︎With an empty weight of no more than 1,300lbs. (590 kg).

 

While the ''Blitz Buggy'' did satisfy these requirements, Bantam was not able to deliver with the fiscal strength or production capability needed to win the contract with the War Department. As as result, Ford and Willys were asked to product their own pilot models for testing, the results of which would determine the contract. The original pilot models were submitted and named accordingly. The Willys Quad by Willys Overland, the Ford Pygmy by Ford and the BRC 60 by Bantam were accepted and orders were given for 1,500 units per company, with a revised weight limit of 2,160Ib. During these pre-production runs, each vehicle was re-named. The Willys Quad became the “MA”, the Ford Pygmy became the “GP”, and the “BRC 60” became the “BRC 40”. By July of 1941, the War Department, needing standardization, selected Willys-Overland to fulfill its contract, on account of the MA’s powerful engine, silhouette, low bid ($748.74/unit), and because of the company’s ability to fulfill production needs, ordering another 16,000 vehicles.

 

Absorbing some of the design features of the Bantam and Ford entries, the Willys “MA” was then renamed the Willys “MB”, and featured the powerful “Go Devil” engine and a welded flat iron “slat” radiator grille (which was later replaced by a stamped grille in March of 1942). By October 1941, due to an increased demand for production, Ford was contracted to assist Willys-Overland and changed their model’s name from “GP to “GPW”, with the "W" referring to the "Willys" licensed design. During World War Two, Ford produced some 280,000 of these vehicles.

 

The MA and early MB's had the “Willys” name stamped into the left rear panel; however, in the spring of 1942, the War Dept. decided not to feature the logo and removed them. Early MB's had a wiper for each side of the windshield, which were hand operated in contrast to later configurations. The windshields also varied slightly. The first 3,500 produced used an MA-type frame, which had a shorter distance between the cowl and the glass frames (4in) The later models had a 6in measurement, and were noticeably taller. In the earlier model MB's, the gas tank still had rectangular lower corners, as opposed to later versions.

 

While earlier black-out lamps for the MB were used as aids to see other vehicles in the convoy, later MB's feature a large blackout headlamp mounted on the left front fender that was used to help the driver see where he was going. The headlamps on all World War Two Willys MB and Ford GPW Jeeps hinged up so they could illuminate the engine compartment in dark times. In 1942 the MB Jeeps got combat wheels, replacing the original stamped and welded version. Combat wheels were heavier and bolted together to facilitate field repair, and also had the ability to transport the vehicle for a distance with deflated tires. All jeeps had brackets for their pioneer tools mounted on the left side below the entryway.

 

Rounded rear corners were found on the bodies of all the production Jeeps, both Willys MB and Ford GPW models. All models also featured larger bumperettes, exterior handles for manual extrication from sticky terrain, and two top bows to raise the height of the canvas and keep it from pounding the heads of the front seat occupants. The instrument panels began to look more militarized on the MB and GPW. Instruments were separate (oil pressure, fuel level, ammeter, water temperature, speedometer) had black faces, and were externally illuminated. The in-out lever for the front differential, and the transfer case lever, were on the right side of the transmission lever, as those components had migrated from the left side on the Bantams to the right side on the production models.

 

Sourced from www.kaiserwillys.com/about_willys_jeep_mb_history_specs

The AEC Militant (aka ''Milly'') was a post-war development by AEC of the AEC Matador Artillery Tractor used during World War Two. Externally the most noticeable development was the cab, which was considerably enlarged. Unlike the Matador only six-wheel versions were produced. Four-wheel versions are extant, but they are probably conversions and one is a Matador with a Mk.I Militant cab. Other changes included the fitting of a larger, 11.3-litre 6-cylinder, diesel engine and the use of a steel frame for the cab, rather than the ash (fraxinus) wood frame of the Matador. The Militant Mk.I was produced in 6x4 and 6x6 form. Although primarily intended as a replacement for the Matador Artillery Tractor, other variants included an Articulated Lorry Tractor Unit, a General Service or Cargo Lorry with a longer wheelbase and as a chassis for mounting various Cranes, usually supplied by Coles.

 

The Militant served with the British Army and some other Armies in most parts of the world, it was intended as an improved Artillery Tractor, but after World War Two, the development of large Artillery Pieces was gradually dropped in favour of more effective Rockets and Missiles, making this role largely redundant during the Militant's service life. Crews had mixed views of the Militant, because it had no power steering, it took considerable effort to turn the steering wheel at slow speeds and in difficult conditions. However, it was credited with a good cross-country performance and was often used to recover the six-wheel drive Alvis Stalwart Amphibious Lorries that bogged in difficult conditions. (The Mk.III did have a power assist Steering Ram). Most variants were fitted with a chassis-mounted winch that was driven through the gearbox, this was intended for manoeuvering of the Towed Field Gun and for self-recovery of the vehicle, proved extremely strong and reliable. The Militant gained the nickname ''Knocker'' from its Military Crews which may have been due to the rhythmic sound of the slow-revving engines.

 

The ''Knocker'' was the nickname of the Mk.I and the one Mk.I CALM was still in service with each RCT Transport Squadron until the AEC fleet was replaced by the Bedford 14 Tonne 6x6 in the early 1990's. AEC Mk.III Recovery Trucks were replaced by Foden GS Recovery 6x6. Many Militants were sold off by the Army in the 1970's and were purchased as Heavy Recovery Vehicles or for forestry use by civilian operators. They were not as popular for forestry operations as their predecessor the Matador because the extra length and an extra axle made them less manoeuvrable in confined spaces. However, some users simply shortened the chassis and removed one axle, effectively creating a more powerful version of the Matador. AEC MK.I Militant's were still in service as late as 1985, the MK.III's were still in service as late as 1990.

  

▪︎Type: Medium / Heavy Artillery Tractor / Multi-Purpose Support Vehicle / 10-ton Cargo Truck

▪︎Place of Origin: United Kingdom

▪︎Designer & Manufacturer: AEC (Associated Equipment Company)

▪︎Produced: 1952 to 1964

▪︎Number Built: 3,200

▪︎Variants: O859 (6x4) / O860 (6x6)

▪︎Mass: Unladen 10.3 to 10.5 tons / Length: 24ft 1in / Width: 8ft / Height: 9ft 8in

▪︎Powerplant: AEC A223 straight-six diesel engine, 150bhp

▪︎Drive: 6x4 or part time 6x6

▪︎Transmission: 5F1Rx2

▪︎Suspension: Live axles on semi-elliptical multi-leaf springs inverted at the rear

▪︎Maximum Speed: 25mph.

 

Information sourced from en.wikipedia.org/wiki/AEC_Militant#:~:text=The%20AEC%20Mi...(or%20%22Milly,six%2Dwheel%20versions%20were%20produced.

1979 Chevrolet El Camino

At the Black Diamond Invitational Car Show.

provideniya, chukchi peninsula

far east siberia, u.s.s.r.

1989

 

on the tarmac

preparing for departure

 

part of an archival project, featuring the photographs of nick dewolf

 

© the Nick DeWolf Foundation

Image-use requests are welcome via flickrmail or nickdewolfphotoarchive [at] gmail [dot] com

This 3400 UTV enjoys a smooth ride with excellent suspension, even on the toughest terrains.

 

STALWART H.M.L.C. FV620 -

 

The Stalwart H.M.L.C. (High Mobility Load Carrier) FV620 first entered service in 1960 and was manufactured by Alvis in the UK.

 

ENGINE - The Stalwart is fitted with a Rolls Royce B81 8 cylinder 6.2 litre water cooled petrol engine producing 210bhp at 3,750rpm coupled to a five speed manual gearbox, giving the vehicle a top speed of 45mph on the road.

 

Although at some time in its history the mechanism has been disabled, the Stalwart was designed to be fully amphibious, being fitted with a Dowty water jet propulsion system. This vehicle is, at the moment, in the early stages of restoration.

 

ROLE - The Stalwart high mobility 6x6 truck was designed to deliver up to 5 tonnes of supplies throughout the battlefield, in particular ammunition or fuel for the Main Battle Tanks, thus allowing the frontline troops to be resupplied, whatever the conditions.

 

SPECIFICATIONS -

 

▪︎Weight: 9 tons

▪︎Maximum payload: 5 tons

▪︎Width: 8 ft 4 in

▪︎Height: 7 ft 5 in

▪︎Length: 20 ft 8 in

▪︎Crew: Driver / Commander + One.

 

Information sourced from - norfolktankmuseum.co.uk/stalwart-h-m-l-c-fv630/

 

Redesigned in 2018 from the ground up, one of the latest Jeep Wranglers for 2021 is a plug-in electric variant dubbed the 4xe to bring the American icon up-to-speed with green energy expectations. As the proud owner of three prior Wranglers, and my current 2016 Unlimited, I enjoy the “spirit of adventure” Wranglers offer and the unequivocal go-anywhere and self-assurance they present. And now, I can partake in Jeep group activities with more planetary consciousness.

 

Redesigned in 2018 from the ground up, one of the latest Jeep Wranglers for 2021 is a plug-in electric variant dubbed the 4xe to bring the American icon up-to-speed with green energy expectations. As the proud owner of three prior Wranglers, and my current 2016 Unlimited, I enjoy the “spirit of adventure” Wranglers offer and the unequivocal go-anywhere and self-assurance they present. And now, I can partake in Jeep group activities with more planetary consciousness.

Redesigned in 2018 from the ground up, one of the latest Jeep Wranglers for 2021 is a plug-in electric variant dubbed the 4xe to bring the American icon up-to-speed with green energy expectations. As the proud owner of three prior Wranglers, and my current 2016 Unlimited, I enjoy the “spirit of adventure” Wranglers offer and the unequivocal go-anywhere and self-assurance they present. And now, I can partake in Jeep group activities with more planetary consciousness.

The Land Rover 130 Defender Wolf RHD Ambulance, is fitted with four stretcher racks, rear step, Marshalls insulated body with heater system and lights.

The Military Land Rover is used as a Light Utility Vehicle and has been adopted in a number of guises and body styles including fire engines, communication vehicle, ambulance, a lightweight model for air transport, snowplough. The Land Rover is in use by the UK military as well as a number of related commonwealth Forces.

The Land Rover is regarding as a reliable workhorse for the British Army. The UK forces vehicles are based on the Series and Defender models and commonly use the 2.5 litre four-cylinder 300TDi engine, which is simple to service and is not electronically controlled.

 

Specifications :-

• Manufacturer :- Land Rover

• Engine :- 300Tdi 111hp

• Gearbox:- R380 5 Speed Manual

• Brakes :- Front and Rear disc brakes

• Steering :- RHD - PAS

• Tyres :- G90 7.50-16

• Electrics :- 24 volts

• Length :- 17ft

• Height :- 8ft 2in

• Width :- 6ft 10in.

On my vistit here I was talking to the motel owner about there used to be a ''Duck'' (DUKW) at Searles of Hunstanton, and this turned out to be the one ! She's just a £35,000 refurbishment and will be making trips to the beaches of Normandy. Photos from Searles www.flickr.com/photos/139375961@N08/shares/142J4T572k

 

— Anglia Motel Veterans champion Harold Payne’s final 80th D-Day voyage pays respects to the fallen —

 

The organiser of a voyage to France to mark the 80th anniversary of D-Day is on his final pilgrimage to pay tribute to the bravery of our armed forces. Harold Payne has taken a final coach party to Normandy to pay respects to allied forces killed in World War II. Sadly, any remaining veterans who would have accompanied him for Thursday’s anniversary have since died. The veterans' champion, who owns the Anglia Motel in Fleet Hargate, said: ''Over the past 30 years I have had the honour to take local veterans back to Normandy to pay respect to their fallen comrades''.

 

''Now for the 80th anniversary of D-Day, for the first and final time I will be returning without any veterans as they have now all passed away. For this, my final tribute to the bravery of all those who died for our freedom, I shall return taking with me my amphibious landing craft to the beaches where all those years ago so many lost their lives.”

 

To break the Nazis’ stranglehold on Europe, Allied forces launched ''Operation Overlord'' on June 6th, 1944, when thousands of British, American and Canadian troops landed on the beaches of Normandy to fight their way up – while being battered by enemy fire. The sea was reported to run red and nearly 4,000 deaths and 11,000 allied casualties were recorded by the end of that first fateful day.

 

The pilgrimages from Lincolnshire were launched after a former soldier had stopped at Harold’s Anglian Motel in Fleet Hargate and shared how he didn’t have the means to return to see the friends he had left behind in Arnhem and Normandy. Mr Payne plans to go into the sea in the early hours of today to lay red rose petals and poppies.

 

He said: ''They may be washed ashore as a reminder of the loss of so many lives''. The charity campaigner has raised funds in aid of veterans to make a pilgrimage to Normandy and visit cemeteries to lay flowers on the graves of friends. To help fund such trips there have been sponsors such as Fleet Parish Council, J Z Flowers and Turnbulls in Sleaford. He said: ''I am fortunate and immensely grateful to have received many sponsors. Many friends and colleagues have also helped to make this memorial tribute possible and I wish to truly thank them on behalf of myself and the past veterans''.

 

Information sourced from and for further details, please follow the link – www.lincsonline.co.uk/holbeach/the-80th-anniversary-d-day...

  

Food trailers with Big Rock Amusements being positioned for the fair. I was at the fairgrounds setting up a booth for work. Since my wife was at work that evening, I chose to walk the midway to see the rides being set up.

1 2 ••• 25 26 28 30 31 ••• 44 45