View allAll Photos Tagged UnitOrigami
Волны-волны.
Посмотрев тут на одну модельку с одним лепестком посреди шипов, я решила
тряхнуть стариной и показать, что тут можно и два лепестка оставить. И пока я раскачалась, появилось вот это (и вы еще будете
говорить, что пространства мыслей не существует?)
Это делается без клея по-честному(крючок) и с двумя лепестками. Но я бы не стала
называть это "просто" или "быстро". Каждому свое. По мне это долго и совсем
не так просто и совсем небыстро (в сравнении с другими моделями). Это мое
личное оценочное суждение ;-) Меня, как видите, хватило только на 12
модулей.
пс. там еще есть несколько вариантов крепилок разной степени крепости.
Можно соорудить крепилку а-ля Рафаелита(я так и не доделала этого монстра - не хватило меня), можно соорудить крепилку а-ля ММ,
вогнув вершины (на любителя и только додекаэдром. Вот тут есть пример kusudama.me/#/Birdy/Ultraviolet-N)
забавный факт 1: это одна из немногих кусудам, которая висит у меня в интерьере. Вот эта(kusudama.me/#/Passiflora_caerulea/Passiflora_caerulea__) уже года три висит у родителей на кухне (она гигантская и на полку не влезла)
Забавный факт 2: я до последнего времени подозревала, что это так или иначе вариация вот этого - stranamasterov.ru/node/520007?tid=850%2C451
Designer: Ekaterina Lukasheva
Created: 2009-2013
Folder: Ekaterina Lukasheva
Parts: 12
Paper's size : 7.5 x 15 cm
Joined with : nothing
Final height: 12 cm
other views - kusudama.me/#/Passiflora_caerulea/Caerulea
older versions - kusudama.me/#/Passiflora_caerulea
Farandola florida
Designer: Lukasheva Ekaterina (Russia)
Created 2011
Folder: Lukasheva Ekaterina
Parts: 30
Paper's size : 5x5
Joined with : nothing
Final height: 8 cm
Diagram: in the book Kusudama Origami
This is a derivative unit, can you guess the "mother" unit?
Super-simple modular origami stars with "neo-sonobe"(kusudama.me/#/Neo-Sonobe) connection. The right one has the same connectors as Phoenix unit.
Designer: Lukasheva Ekaterina
Created: 2012
Folder: Lukasheva Ekaterina
Parts: 5, 6
Paper's size : 5 cm
Joined with : nothing
Final height: 8 cm
Diagram: in the book Modern kusudama origami
Designer: Masha Athanasiadi
Units: 30
Paper: 7х7
no glue
Два вида лепестков :)
Вариация вот этого
www.flickr.com/photos/73033379@N07/28034325335/in/datepos...
Designer: Masha Athanasiadi
Units: 30
Paper: 7х7
no glue
Лепесточек по другому отогнут
www.flickr.com/photos/73033379@N07/28001010886/in/datepos...
Passiflora star
Designer: Lukasheva Ekaterina
Created: 2012
Folder: Lukasheva Ekaterina
Parts: 5
Paper's size: 15x15 cm
Joined with : nothing
Final height: 8 cm
Made of modified Passiflora unit. The back side is the same (The star has 10 petals!)
Designer: Ekaterina Lukasheva
Created: 2013
Folder: Ekaterina Lukasheva
Parts: 30
Paper's size : 7.5 cm
Paper: harmony
Joined with : nothing
Final height: 12 cm
Rotated unit of Flora flic.kr/p/iT1XyB
Marquise
Designer: Lukasheva Ekaterina (Russia)
Created 2010
Folder: Lukasheva Ekaterina
Parts: 24
Paper's size : 7.5x7.5 cm
Joined with : nothing
Final height:~11cm
Diagram: wasn't published
A tetrahedron assembled from three of Kunihiko Kasahara's pinwheel cube modules. Instructions can be found on page 138 of Tomoko Fuse's book "Unit Origami".
The model shown here is folded from 2"×2" duo-toned paper.
From "Modular Origami Polyhedra" by Simon, Arnstein, and Gurkewitz. Technically not a stellation of the octahedron, which would be a stella octangula: an octahedron with a regular tetrahedron added to each face. Nor is it a triakis octahedron, which has an obtuse triangular pyramid on each face. I'm not sure what a correct name for it is.
Proof that Chinese unit origami can be used for animals as well as inanimate objects. I made a chipmunk. I may stick on some facial features, but at the moment I like it how it is.
I made it in December, but it was burried with many other files for update. I hope I finally make an update soon.
But the more I look on it the more I think "Isnt't it a reinvented wheel?" (the answers are highly appreciated!)
Designer: Lukasheva Ekaterina (Russia) - ?
Created 2011
Folder: Lukasheva Ekaterina
Parts: 30
Paper's size : 5 x 5
Joined with : nothing
Final height: 11 cm
Diagram: wasn't published
Esperanza
Designer: Ekaterina Lukasheva
Created: 2013
Folder: Ekaterina Lukasheva
Parts: 12, 12 (same unit - various assemblies)
Paper's size : 7.5 x 7.3 cm
Joined with : nothing
Final height: 7-8 cm
Strange, but beautiful unit. Smth in between Jade and Neo-sonobe (in
principle)
It took a bit to make. It is not that is hard to make. The pieces just make slowly.
The pieces have an interesting curve to them.
30x square units
Copy paper
Doesn't require glue, but it makes life easier
Found on
s.prworigami.com/2024/05/01/wedge-sakura/
And
youtube.com/watch?v=6tX7mvRnrwk&pp=0gcJCR4Bo7VqN5tD
This is the truchet tile used to make the preceding image. Decorating the faces of a triangle mesh with this pattern reveals how it would look held-together with Philip Chapman-Bell's ying-yang closures.
There is always a bit of yin in yang and a bit of yang in yin 😃
For this model, I cut up printed copy paper into squares/half squares and I didn't have enough of one colour so I decided to mix it up with one of the same pattern but different colour. While there is an aesthetic of having a kusudama with one uniform pattern throughout, I think there is a beauty in having it a bit "infected" .❤️ 紙は一つの色が足りなかったから、少し変わりました。こういうふうにも悪くないと思います。⭐
_______
Greenery Kusudama | みどりくす玉
Model and tutorial by @prworigami2018 | prw origami さんの折り紙作品
Folded by me from 30 ½ squares, no glue used | 紙は 30枚 {1:2} です
_______
#spiky #kusudama #papiroflexia #papiro #modularorigami #unitorigami #折り紙アート #折り紙 #종이접기 #Орігамі #折紙 #handmade #decoration #origami #star #origamikusudama #papercraft #paperart #paperfolding #arteenpapel #おりがみ #paperstar #くす玉 #artistoninstagram #paperlove #paperaddict #paperfold #strictlypaperart #paperflexn #foldingpaper
The closed variant of Gloriosa. Has other connection method, closed back
(the back is solid) but the same base as Gloriosa flowers.
6-7 squares
no glue
I really like this one.
I have seen it in 1 side and 2 paper. I think it looks a lot better with dual sided paper it is really easy to get consistent results. I doubt it is overly durable. But i dont think it is going to explode sitting on the shelf.
I used 15 sheets of square Origami paper split into 1:2 rectangles for 30 pieces
I think it could be done with no glue, but after several hours og trying and failing
I used glue
Regenbogen designed by Maria Vakhrusheva.
tutorial in German here, at 1petiteSociere’s youtube. m.youtube.com/watch?v=XDqSTRQtewU&pp=0gcJCTMBo7VqN5tD
Stellated Icosahedron made from 30 Sonobe unit variants. I am sure someone must have made Sonobes like this before, but I have yet to find one on the web. I will put some clearer pictures of the units on my blog in the next few days. In my mind I am calling them "Side Pocket Sonobes".
Designer: Masha Athanasiadi
Units: 30
Paper: 1:2,9
no glue
www.flickr.com/photos/73033379@N07/32434641892/in/datepos...
С открытыми лепестками
Designer: Ekaterina Lukasheva
Created: 2011-2012
Folder: Lukasheva Ekaterina
Parts: 5
Paper's size : 7.5 cm
Joined with : nothing
Final height: 7 cm
I really like this one.
I have seen it in 1 side and 2 paper. I think it looks a lot better with dual sided paper it is really easy to get consistent results. I doubt it is overly durable. But i dont think it is going to explode sitting on the shelf.
I used 15 sheets of square Origami paper split into 1:2 rectangles for 30 pieces
I think it could be done with no glue, but after several hours og trying and failing
I used glue
Regenbogen designed by Maria Vakhrusheva.
tutorial in German here, at 1petiteSociere’s youtube. m.youtube.com/watch?v=XDqSTRQtewU&pp=0gcJCTMBo7VqN5tD
Twister-n
Designer: Lukasheva Ekaterina (Russia)
Created 2011
Folder: Lukasheva Ekaterina
Parts: 30
Paper's size :10x20 cm
Joined with : nothing
Final height: 20 cm
Diagram: wasn't published
Close to this model
Мелодию можно угадать с "первых нот".
Немного не в моем стиле получилась кусудама... вернее совсем не в моем...
ну что уж делать))
Designer: Ekaterina Lukasheva
Created: 2011
Folder: Ekaterina Lukasheva
Parts: 30
Paper's size : 7.5 cm
Paper: KOMA
Joined with : nothing
Final height: 11 cm
Many-many stars...
It's too much!
The stars don't need much space to store, but it seems that I can't present a little star to someone...It's a problem ;-) I allways present kusudamas to my friends...
Designer: Ekaterina Lukasheva (Russia)
Created: 2011-2012
Folder: Lukasheva Ekaterina
Joined with : nothing
Final height: 7-10 cm
Paper size: from 5x5 to 7.5x7.5 cm
Units: from 4 to 9
Some close views:
An adaptive mesh decorated with the preceding truchet tile. The underlying triangle mesh (the bridge of Neptune's nose) is courtesy INRIA via the Aim@Shape Shape Repository.
These jewelry is made out of paper. This product has been given waterproof coating. Therefore, it is water resistant.
Diameter:
Height: 5.0 cm approx (with hook)
Width : 3.0 cm approx
My Shop:
www.craftsvilla.com/fahcreations
For more such creations please visit my bog:
30 units copy paper
a4 size rectangles
tutorials can be found in book "david brill brilliant origami"
the units allow a lot of different things to be built. I know you can build a ball with x24 or x60 units. and once they are put together, they don't come apart easily.
Once again some free seconds... I wish I had some time to answer all mail...
Very simple design based on sonobe connectors, but these flowers in the middle fascinate me :)
Designer: Lukasheva Ekaterina
Created: 2012
Folder: Lukasheva Ekaterina
Parts: 30
Paper's size : 7.5 cm
Joined with : nothing
Final height: 13 cm