Sponsored images from 
View allAll Photos Tagged SpaceLaunchSystem
From across the Atlantic Ocean and through the Gulf of Mexico, two ships converged, delivering key spacecraft and rocket components of NASA’s Artemis campaign to the agency’s Kennedy Space Center in Florida.
On Sept. 3, ESA (European Space Agency) marked a milestone in the Artemis III mission as its European-built service module for NASA’s Orion spacecraft completed a transatlantic journey from Bremen, Germany, to Port Canaveral, Florida, where technicians moved it to nearby NASA Kennedy. Transported aboard the Canopée cargo ship, the European Service Module—assembled by Airbus with components from 10 European countries and the U.S.—provides propulsion, thermal control, electrical power, and water and oxygen for its crews.
NASA’s Pegasus barge, the agency’s waterway workhorse for transporting large hardware by sea, ferried multi-mission hardware for the agency’s SLS (Space Launch System) rocket, the Artemis II launch vehicle stage adapter, the “boat-tail” of the core stage for Artemis III, the core stage engine section for Artemis IV, along with ground support equipment needed to move and assemble the large components. The barge pulled into NASA Kennedy’s Launch Complex 39B Turn Basin Thursday.
NASA’s Pegasus barge, carrying several pieces of hardware for Artemis II, III, and IV arrives at NASA Kennedy’s Launch Complex 39 turn basin wharf on Thursday, Sept. 5, 2024.
Credits: NASA
#Artemis #NASAMarshall #Space #NASASLS #NASA #NASAMichoud #NASAKennedy #PegasusBarge #LVSA #Artemis #ArtemisII #ArtemisIII #ArtemisIV
The rocket that will launch NASA’s Orion spacecraft to the Moon with the European Service Module on its way to the launchpad in Florida, USA, for its first full test before the Artemis I launch later this year.
The Space Launch Systems rocket (SLS) left the Vehicle Assembly Building at NASA’s Kennedy Space Center at around 23:00 CET (22:00 GMT) on 17 March on the start of its 6.5 km trip to Launchpad LC39B.
In the preceding months the Orion spacecraft with European Service Module had been placed on top of the rocket. The first Artemis mission will send Orion to the Moon and back, farther than any human-rated spacecraft has travelled before. ESA’s European Service Module is the powerhouse that fuels and propels Orion, and provides everything needed to keep astronauts alive with water, oxygen, power and temperature control.
Credits: ESA–A. Conigli
Technicians at NASA's Marshall Space Flight Center recently moved the completed launch vehicle stage adapter for NASA's Space Launch System for Artemis III to a new facility on center where it will remain until it is time to ship the hardware to NASA's Kennedy Space Center.
The cone-shaped hardware connects the SLS (Space Launch System) rocket to the upper stage, the interim cryogenic propulsion stage, and protects the rocket’s flight computers, avionics, and electrical devices during launch and ascent during the Artemis missions.
SLS Booster Work Continues after Major Test
Orbital ATK technicians detach the center forward segment from the forward segment of NASA's five-segment booster that fired up for testing March 11 at Orbital ATK's test facility in Promontory, Utah. The two-minute static test was the first of two ground tests to support qualification of the boosters that will help launch the first flight of NASA's new rocket--the Space Launch System (SLS). The most powerful launch vehicle ever built, SLS will take humans and cargo on deep space missions, including an asteroid and ultimately to Mars. Disassembly and inspection of the booster is ongoing, but preliminary analysis of the test data shows all test objectives were successfully completed during the hot fire. The second qualification test is planned for early 2016. Once qualified, flight booster hardware will undergo final manufacturing and preparation for shipment to NASA’s Kennedy Space Center in Florida for the rocket's first unmanned flight.
Image credit: Orbital ATK
Liftoff! NASA’s Space Launch System carrying the Orion spacecraft lifts off the pad at Launch Complex 39B at the agency’s Kennedy Space Center in Florida at 1:47 a.m. EST on Nov. 16, 2022. The first in a series of increasingly complex missions, Artemis I will provide a foundation for human deep space exploration and demonstrate our commitment and capability to extend human presence to the Moon and beyond. The primary goal of Artemis I is to thoroughly test the integrated systems before crewed missions by operating the spacecraft in a deep space environment, testing Orion’s heat shield, and recovering the crew module after reentry, descent, and splashdown. Photo credit: Chris Coleman and Kevin Davis
Editor's note: wow....talk about #nextgiantleap. :)
This artist concept shows NASA’s Space Launch System, or SLS, rolling to a launchpad at Kennedy Space Center at night. SLS will be the most powerful rocket in history, and the flexible, evolvable design of this advanced, heavy-lift launch vehicle will meet a variety of crew and cargo mission needs.
In addition to carrying the Orion Multi-Purpose Crew Vehicle, SLS will transfer important cargo, equipment and science experiments to deep space, providing the nation with a safe, affordable and sustainable means to expand our reach in the solar system. It will allow astronauts aboard the Orion spacecraft to explore multiple deep-space destinations including an asteroid and ultimately Mars.
Original image:
www.nasa.gov/sls/multimedia/gallery/sls-launchpad-night.html
Image credit: NASA/MSFC
More about SLS:
www.nasa.gov/exploration/systems/sls/index.html
More SLS Photos:
www.nasa.gov/exploration/systems/sls/multimedia/gallery/S...
Space Launch System Flickr album
www.flickr.com/photos/28634332@N05/sets/72157627559536895/
_____________________________________________
These official NASA photographs are being made available for publication by news organizations and/or for personal use printing by the subject(s) of the photographs. The photographs may not be used in materials, advertisements, products, or promotions that in any way suggest approval or endorsement by NASA. All Images used must be credited. For information on usage rights please visit: www.nasa.gov/audience/formedia/features/MP_Photo_Guidelin...
The rocket that will launch NASA’s Orion spacecraft to the Moon with the European Service Module on its way to the launchpad in Florida, USA, for its first full test before the Artemis I launch later this year.
The Space Launch Systems rocket (SLS) left the Vehicle Assembly Building at NASA’s Kennedy Space Center at around 23:00 CET (22:00 GMT) on 17 March on the start of its 6.5 km trip to Launchpad LC39B.
In the preceding months the Orion spacecraft with European Service Module had been placed on top of the rocket. The first Artemis mission will send Orion to the Moon and back, farther than any human-rated spacecraft has travelled before. ESA’s European Service Module is the powerhouse that fuels and propels Orion, and provides everything needed to keep astronauts alive with water, oxygen, power and temperature control.
Credits: ESA–A. Conigli
NASA’s Space Launch System and Orion spacecraft atop the mobile launcher are in view in High Bay 3 of the Vehicle Assembly Building (VAB) at the agency’s Kennedy Space Center in Florida on Tuesday, Aug. 16, 2022. All of the work platforms have been retracted in preparation for rollout to Launch Complex 39B ahead of launch of Artemis I. The crawler-transporter, driven by engineers, is under the Artemis I stack atop the mobile launcher and will carry it 4.2 miles via the crawlerway that connects the VAB to the launch pad. The agency’s Artemis I flight test is scheduled to liftoff on Monday, Aug. 29. The first in a series of increasingly complex missions, Artemis I will provide a foundation for human deep space exploration and demonstrate our commitment and capability to extend human presence to the Moon and beyond. The primary goal of Artemis I is to thoroughly test the integrated systems before crewed missions by launching Orion atop the SLS rocket, operating the spacecraft in a deep space environment, testing Orion’s heat shield, and recovering the crew module after reentry, descent, and splashdown. Photo credit: NASA/Kim Shiflett
Technicians at NASA's Michoud Assembly Facility in New Orleans moved the engine section for NASA's Space Launch System (SLS) rocket to another part of the facility on Sept. 3 to prepare it for joining to the rest of the rocket's core stage. The engine section, which comprises the lowest portion of the 212-foot-tall stage, is the last major component to be horizontally integrated to the core stage. The flight hardware will be used for Artemis I, the first lunar mission of SLS and NASA's Orion spacecraft. Crews completed assembly on the engine section on Aug. 29. NASA and Boeing engineers removed the scaffolding surrounding the hardware to use a special tool to properly position the engine section for its attachment to the rest of the stage. The core stage's two liquid propellant tanks and four RS-25 engines will produce more than 2 million pounds of thrust to send the SLS rocket and Orion on the Artemis lunar missions. The engine section houses the four RS-25 engines and includes vital systems for mounting, controlling and delivering fuel from the propellant tanks to the rocket's engines.
NASA is working to land the first woman and the next man on the Moon by 2024. SLS and NASA's Orion spacecraft, along with the Gateway in orbit around the Moon, are the backbone for deep space exploration. SLS is the only rocket that can send Orion, astronauts and supplies to the Moon in a single mission.
Image Credit: NASA/Steven Seipel
In this view looking up inside the Vehicle Assembly Building at NASA’s Kennedy Space Center in Florida on March 10, 2022, the work platforms are being retracted from around the Artemis I Space Launch System rocket and Orion spacecraft in preparation to roll out to launch pad 39B. The Kennedy ground systems team is working to remove equipment and scaffolding away from the rocket and will continue retracting the platforms until the entire rocket is revealed ahead of the wet dress rehearsal test, which is scheduled to occur approximately two weeks after it arrives at the pad.
This engine section structural test article for NASA's Space Launch System is being prepared to be shipped on the barge Pegasus from NASA's Michoud Assembly Facility to the Marshall Space Flight Center in Huntsville, Alabama. Once it arrives at the Marshall Center, it will undergo structural testing.
The engine section will house four RS-25 engines and power the core stage of the Space Launch System, the world’s most powerful rocket.
Image credit: NASA/MAF
#NASAMichoud, #NASAMarshall, #NASASLS
Four RS-25 engines, like the one pictured undergoing a hot-fire test, will power the core stage of NASA's Space Launch System (SLS) -- NASA's new heavy-lift launch vehicle. Formerly known as the space shuttle main engine, the RS-25 will be tested beginning in 2014 at NASA's Stennis Space Center.
Image credit: NASA/MSFC
Original image:
www.nasa.gov/exploration/systems/sls/multimedia/gallery/r...
More about SLS:
www.nasa.gov/exploration/systems/sls/index.html
More SLS Photos:
www.nasa.gov/exploration/systems/sls/multimedia/gallery/S...
Space Launch System Flickr photoset:
www.flickr.com/photos/28634332@N05/sets/72157627559536895/
_____________________________________________
These official NASA photographs are being made available for publication by news organizations and/or for personal use printing by the subject(s) of the photographs. The photographs may not be used in materials, advertisements, products, or promotions that in any way suggest approval or endorsement by NASA. All Images used must be credited. For information on usage rights please visit: www.nasa.gov/audience/formedia/features/MP_Photo_Guidelin...
Liftoff! NASA’s Space Launch System carrying the Orion spacecraft lifts off the pad at Launch Complex 39B at the agency’s Kennedy Space Center in Florida at 1:47 a.m. EST on Nov. 16, 2022. The first in a series of increasingly complex missions, Artemis I will provide a foundation for human deep space exploration and demonstrate our commitment and capability to extend human presence to the Moon and beyond. The primary goal of Artemis I is to thoroughly test the integrated systems before crewed missions by operating the spacecraft in a deep space environment, testing Orion’s heat shield, and recovering the crew module after reentry, descent, and splashdown. Photo credit: NASA/Isaac Watson
If you want learn more about NASA's Rocket Booster, the largest component of our new rocket - Space Launch System - here's the place!
This infographic takes us back to school and sums up everything you need to know about the Space Launch System Solid Rocket Booster or SRB. The booster will use a 5-segment solid propellant motor, and the motor is the largest component of the Space Launch System booster. Watch the booster test live on NASA TV March 11, 2015 as it is broadcast from Orbtial ATK in Promontory, Utah.
Image credit: NASA/MSFC
A liquid oxygen tank confidence article for NASA's new rocket, the Space Launch System, completes final welding on the Vertical Assembly Center at Michoud Assembly Facility in New Orleans.
A liquid oxygen tank confidence article for NASA's new rocket, the Space Launch System, completes final welding on the Vertical Assembly Center at Michoud Assembly Facility in New Orleans.
_______________________________
These official NASA photographs are being made available for publication by news organizations and/or for personal use printing by the subject(s) of the photographs. The photographs may not be used in materials, advertisements, products, or promotions that in any way suggest approval or endorsement by NASA. All Images used must be credited. For information on usage rights please visit: www.nasa.gov/audience/formedia/features/MP_Photo_Guidelin...
A Boeing weld technician inspects a recent weld on the Gore Weld Tool at NASA's Michoud Assembly Facility in New Orleans. The Gore Weld Tool is used to perform vertical conventional friction-stir welds in the production of gore assemblies for NASA's Space Launch System core stage hydrogen fuel tank -- currently under construction at Michoud. All of the hardware necessary for building the tank that will be used on the first flight of SLS has been delivered to the facility and is awaiting assembly. SLS will be the most powerful rocket ever built for deep space missions, including to an asteroid and ultimately to Mars. The core stage, towering more than 200 feet, will store cryogenic liquid hydrogen and liquid oxygen that will feed the vehicle’s RS-25 engines. Boeing is the prime contractor for the SLS core stage, including avionics.
Image Credit: Boeing
More about SLS:
More SLS graphics and concepts:
www.nasa.gov/exploration/systems/sls/multimedia/gallery/S...
Space Launch System Flickr album
www.flickr.com/photos/28634332@N05/sets/72157627559536895/
________________________________
These official NASA photographs are being made available for publication by news organizations and/or for personal use printing by the subject(s) of the photographs. The photographs may not be used in materials, advertisements, products, or promotions that in any way suggest approval or endorsement by NASA. All Images used must be credited. For information on usage rights please visit: www.nasa.gov/audience/formedia/features/MP_Photo_Guidelin...
Technicians from NASA’s Exploration Ground Systems use massive cranes inside the agency’s Vehicle Assembly Building (VAB) to lift the fully assembled SLS (Space Launch System) core stage vertically 225 feet above the ground from High Bay 2 to a horizontal position in the facility’s transfer aisle at NASA’s Kennedy Space Center in Florida on Friday, March 14, 2025. The 212-foot core stage will undergo final checkouts before being lifted into the VAB’s High Bay 3 for integration alongside the completed stack of twin solid rocket booster segments.
Next year, the Artemis II mission will carry four astronauts – NASA astronauts Reid Wiseman, Victor Glover, and Christina Koch, and CSA (Canadian Space Agency) astronaut Jeremy Hansen – around the Moon. The mission is the first crewed flight under NASA’s Artemis campaign and is another step toward missions on the lunar surface and helping the agency prepare for future human missions to Mars.
Credit: NASA/Kim Shiflett
#NASA #space #moon #NASAMarshall #msfc #sls #spacelaunchsystem #nasasls #rockets #exploration #artemis #ArtemisII
NASA rolled out the SLS (Space Launch System) rocket’s core stage for the Artemis II test flight from its manufacturing facility in New Orleans on Tuesday for shipment to the agency’s spaceport in Florida. The rollout is key progress on the path to NASA’s first crewed mission to the Moon under the Artemis campaign.
Using highly specialized transporters, engineers maneuvered the giant core stage from inside NASA’s Michoud Assembly Facility in New Orleans to the agency’s Pegasus barge. The barge will ferry the stage more than 900 miles to NASA’s Kennedy Space Center in Florida, where engineers will prepare it in the Vehicle Assembly Building for attachment to other rocket and Orion spacecraft elements.
In this image, NASA astronaut Reid Wiseman and CSA (Canadian Space Agency) astronaut Jeremy Hansen watch move teams on July 16 transport the core stage of NASA’s SLS (Space Launch System) rocket for delivery to the Space Coast. The core stage will help power their Artemis II mission to the Moon.
Credit: NASA/Sam Lott
#Artemis #NASAMarshall #Space #NASASLS #NASA #NASAMichoud #NASAKennedy #astronaut
A structural test version of the intertank for NASA's new heavy-lift rocket, the Space Launch System, is loaded onto the barge Pegasus Feb. 22, at NASA's Michoud Assembly Facility in New Orleans. The intertank is the second piece of structural hardware for the rocket's massive core stage scheduled for delivery to NASA's Marshall Space Flight Center in Huntsville, Alabama, for testing. Engineers at Marshall will push, pull and bend the intertank with millions of pounds of force to ensure the hardware can withstand the forces of launch and ascent. The flight version of the intertank will connect the core stage's two colossal fuel tanks, serve as the upper-connection point for the two solid rocket boosters and house the avionics and electronics that will serve as the "brains" of the rocket. Pegasus, originally used during the Space Shuttle Program, has been redesigned and extended to accommodate the SLS rocket's massive, 212-foot-long core stage -- the backbone of the rocket. The 310-foot-long barge will ferry the flight core stage from Michoud to other NASA centers for tests and launch.
Image credit: NASA/Michoud/Steven Seipel
For more images of the Intertank move
For more Space Launch System images
For more Michoud Assembly Facility images
The Artemis I Space Launch System with the Orion spacecraft atop are in view inside High Bay 3 of the Vehicle Assembly Building at NASA’s Kennedy Space Center in Florida on June 3, 2022. The crawler-transporter, driven by engineers, is positioned underneath the Artemis I stack atop the mobile launcher. The crawler will carry the stack to Launch Complex 39B for a wet dress rehearsal test ahead of the Artemis I launch. Artemis I will be the first integrated test of the SLS and Orion spacecraft. In later missions, NASA will land the first woman and the first person of color on the surface of the Moon, paving the way for a long-term lunar presence and serving as a steppingstone on the way to Mars. Photo credit: NASA/Frank Michaux
Engineers and technicians inside the Vehicle Assembly Building (VAB) at NASA’s Kennedy Space Center in Florida stacked the first segment of the Artemis II SLS (Space Launch System) rocket boosters onto mobile launcher 1.
Comprising 10 segments total – five segments for each booster – the SLS solid rocket boosters arrived via train to NASA Kennedy in September 2023 from Northrop Grumman’s manufacturing facility in Utah. The booster segments underwent processing in the spaceport’s Rotation, Processing and Surge Facility before being transferred to the NASA’s iconic VAB for stacking operations.
Credits: NASA/Glenn Benson
#Artemis #NASAMarshall #Space #NASASLS #NASA #NASAMichoud #NASAKennedy #Artemis #ArtemisII
In this view looking up in High Bay 3 of the Vehicle Assembly Building at NASA's Kennedy Space Center in Florida on April 26, 2021, the twin solid rocket boosters for the Artemis I mission are stacked on the mobile launcher for the Space Launch System (SLS). Workers with Exploration Ground Systems and contractor Jacobs teams will stack the twin five-segment boosters on the mobile launcher over several weeks. When the core stage arrives, it will join the boosters on the mobile launcher, followed by the interim cryogenic propulsion stage and Orion spacecraft. Manufactured by Northrop Grumman in Utah, the twin boosters provide more than 75 percent of the total SLS thrust at launch. The SLS is managed by Marshall Space Flight Center in Huntsville, Alabama. Under the Artemis program, NASA will land the first woman and person of color on the Moon. The first in a series of increasingly complex missions, Artemis I will test the Orion spacecraft and SLS as an integrated system ahead of crewed flights to the Moon. Photo credit: NASA/Frank Michaux
In a view from above, NASA’s Space Launch System (SLS) rocket and Orion spacecraft for Artemis I are in High Bay 3 inside the Vehicle Assembly Building at the agency’s Kennedy Space Center in Florida on Aug. 3, 2022. Work platforms surround the SLS and Orion stack. Artemis I will be the first integrated test of the SLS and Orion spacecraft. In later missions, NASA will land the first woman and the first person of color on the surface of the Moon, paving the way for a long-term lunar presence and serving as a steppingstone on the way to Mars. Photo credit: NASA/Frank Michaux
The next milestone for NASA's SLS (Space Launch System) rocket is right around the corner as the cone-shaped launch vehicle stage adapter for NASA's Artemis II mission prepares to make its way from the agency's Marshall Space Flight Center in Huntsville, Alabama, to NASA's Kennedy Space Center. Standing 27.5 feet tall, the adapter plays a critical role by partially enclosing the rocket's interim cryogenic propulsion stage, connecting it to the core stage below and the Orion stage adapter above. Technicians with NASA and Teledyne Brown Engineering, LVSA lead contractor, work diligently to prepare the hardware before loading it onto NASA's Pegasus barge for its delivery to the Space Coast. Stacking of the rocket will soon begin at NASA's Kennedy Space Center, marking a pivotal step towards the agency sending a crew of four astronauts around the Moon during Artemis II. For more information about SLS, visit www.nasa.gov/sls
Credit: NASA
#NASAMarshall #Artemis #NASA #SLS #SpaceLaunchSystem #NASASLS #Astronauts #Moon #RocketScience #LVSA #rocket
An engine section structural qualification test article for NASA's new rocket, the Space Launch System, is loaded onto the barge Pegasus at the agency's Michoud Assembly Facility in New Orleans. The test article now will make its way from Michoud to NASA's Marshall Space Flight Center in Huntsville, Alabama, for structural loads testing. For the test series, hydraulic cylinders will be electronically controlled to push, pull, twist and bend the test article with millions of pounds of force to ensure the hardware can withstand the extreme forces of launch and ascent. The engine section, located at the bottom of the rocket's core stage, will house the four RS-25 engines and be an attachment point for the two solid rocket boosters. The engine section test article is the first of four core stage test articles manufactured at Michoud and is designed to the same specifications as the engine section that will fly on the first SLS mission with the Orion spacecraft.
Image credit: NASA/MSFC/Michoud
#NASAMichoud, #NASAMarshall
For more Space Launch System images
For more Michoud Assembly Facility images
NASA’s Space Launch System (SLS) will be the most powerful rocket in history for deep space missions, including to an asteroid and ultimately to Mars. The first flight test of the SLS will feature a configuration for a 70-metric-ton (77-ton) lift capacity and carry an uncrewed Orion spacecraft beyond low-Earth orbit to test the performance of the integrated system. As the SLS evolves, it will provide an unprecedented lift capability of 130 metric tons (143 tons) to enable missions even farther into our solar system.
Image credit: NASA
Original image:
www.nasa.gov/sls/multimedia/gallery/sls-top-view.html
More about SLS:
More SLS graphics and concepts:
www.nasa.gov/exploration/systems/sls/multimedia/gallery/S...
Space Launch System Flickr album
www.flickr.com/photos/28634332@N05/sets/72157627559536895/
_____________________________________________
These official NASA photographs are being made available for publication by news organizations and/or for personal use printing by the subject(s) of the photographs. The photographs may not be used in materials, advertisements, products, or promotions that in any way suggest approval or endorsement by NASA. All Images used must be credited. For information on usage rights please visit: www.nasa.gov/audience/formedia/features/MP_Photo_Guidelin...
NASA’s Pegasus barge, carrying the agency’s massive SLS (Space Launch System) core stage, arrives at NASA’s Kennedy Space Center Complex 39 turn basin wharf in Florida on Tuesday, July 23, 2024, after journeying from the agency’s Michoud Assembly Facility in New Orleans. The core stage is the next piece of Artemis hardware to arrive at the spaceport and will be offloaded and moved to NASA Kennedy’s Vehicle Assembly Building, where it will be prepared for integration ahead of the Artemis II launch.
Credit: NASA/Kim Shiflett
#Artemis #NASAMarshall #Space #NASASLS #NASA #NASAMichoud #NASAKennedy
NASA Space Launch System (SLS) rocket and Orion spacecraft for Artemis I are in view inside High Bay 3 of the Vehicle Assembly Building at the agency’s NASA’s Kennedy Space Center in Florida on Aug. 3, 2022. Artemis I will be the first integrated test of the SLS and Orion spacecraft. In later missions, NASA will land the first woman and the first person of color on the surface of the Moon, paving the way for a long-term lunar presence and serving as a steppingstone on the way to Mars. Photo credit: NASA/Frank Michaux
The Spacecraft Adapter Cone for NASA’s Orion Exploration Mission-1 (EM-1) is shown during assembly inside the manufacturing facility. This conical structure connects the Orion crew module and service module to the Space Launch System (SLS) rocket, housing critical components such as separation hardware, wiring harnesses, and payload deployment systems. Its reinforced aluminum construction includes visible thermal protection areas, structural attachment brackets, and integrated circuitry for communication and control. EM-1, later renamed Artemis I, was designed as an uncrewed test flight to evaluate Orion’s deep-space capabilities for future crewed lunar missions.
This artist concept shows boosters separating from NASA’s Space Launch System. The first flight test of NASA's new rocket is scheduled for 2017. (Note: artist concept updated Sept. 13, 2013)
The Space Launch System, or SLS, will be designed to carry the Orion Multi-Purpose Crew Vehicle, as well as important cargo, equipment and science experiments to Earth's orbit and destinations beyond.
America’s new heavy-lift rocket will be the largest launch vehicle ever built and more powerful than the Saturn V rocket that carried Apollo astronauts to the moon. The 70-metric-ton configuration (77 tons) will lift more than 154,000 pounds and will provide 10 percent more thrust than the Saturn V rocket. The 130-metric-ton-configuration (143 tons) will lift more than 286,000 pounds and provide 20 percent more thrust than the Saturn V.
The first SLS mission — Exploration Mission 1 — in 2017 will launch an uncrewed Orion spacecraft to demonstrate the integrated system performance of the SLS rocket and spacecraft prior to a crewed flight.
Image credit: NASA/MSFC
Original image:
www.nasa.gov/exploration/systems/sls/multimedia/gallery/s...
More about SLS:
www.nasa.gov/exploration/systems/sls/index.html
More SLS Photos:
www.nasa.gov/exploration/systems/sls/multimedia/gallery/S...
Space Launch System Flickr photoset:
www.flickr.com/photos/28634332@N05/sets/72157627559536895/
_____________________________________________
These official NASA photographs are being made available for publication by news organizations and/or for personal use printing by the subject(s) of the photographs. The photographs may not be used in materials, advertisements, products, or promotions that in any way suggest approval or endorsement by NASA. All Images used must be credited. For information on usage rights please visit: www.nasa.gov/audience/formedia/features/MP_Photo_Guidelin...
Liftoff! NASA’s Space Launch System carrying the Orion spacecraft lifts off the pad at Launch Complex 39B at the agency’s Kennedy Space Center in Florida at 1:47 a.m. EST on Nov. 16, 2022. The first in a series of increasingly complex missions, Artemis I will provide a foundation for human deep space exploration and demonstrate our commitment and capability to extend human presence to the Moon and beyond. The primary goal of Artemis I is to thoroughly test the integrated systems before crewed missions by operating the spacecraft in a deep space environment, testing Orion’s heat shield, and recovering the crew module after reentry, descent, and splashdown. Photo credit: NASA/Kevin Davis and Chris Coleman
With the assembly of the first core stage for NASA's Space Launch System rocket complete and delivered to the agency's Stennis Space Center near Bay St. Louis, Mississippi, for Green Run testing, NASA is focusing its efforts on building the core stages for the first and second Artemis lunar missions. For this episode of Rocket Science in 60 Seconds, Boeing production superintendent Eric Sturgeon takes you inside NASA's Michoud Assembly Facility in New Orleans where the SLS rocket core stages are manufactured. In this episode, he'll explain how NASA and Boeing evaluate each rocket's construction and what they've learned from building the first rocket stage.
Image credit: NASA/SSC
The Space Launch System (SLS) core stage is seen atop the mobile launcher inside High Bay 3 of the Vehicle Assembly Building at NASA’s Kennedy Space Center in Florida on June 12, 2021. Teams with NASA’s Exploration Ground Systems and contractor Jacobs lifted and lowered the core stage – the largest part of the rocket – onto the mobile launcher, placing it in between the twin solid rocket boosters. The 188,000-pound core stage, with its four RS-25 engines, will provide more than 2 million pounds of thrust during launch and ascent, and coupled with the boosters, will provide more than 8.8 million pounds of thrust to send the Artemis I mission to space. Under the Artemis program, NASA will land the first woman and first person of color on the Moon, as well as establish a sustainable presence on the lunar surface in preparation for human missions to Mars. Photo credit: NASA/Cory Huston
NASA’s Space Launch System carrying the Orion spacecraft creates a streak of white light as it soars upward after liftoff from the pad at Launch Complex 39B at the agency’s Kennedy Space Center in Florida on Nov. 16, 2022. Liftoff occurred at 1:47 a.m. EST. The first in a series of increasingly complex missions, Artemis I will provide a foundation for human deep space exploration and demonstrate our commitment and capability to extend human presence to the Moon and beyond. The primary goal of Artemis I is to thoroughly test the integrated systems before crewed missions by operating the spacecraft in a deep space environment, testing Orion’s heat shield, and recovering the crew module after reentry, descent, and splashdown. Photo credit: NASA/Kevin Davis
Artist's concept of NASA's Space Launch System initial crew vehicle launching from the Kennedy Space Center.
The Journey to Mars became more real this week. For the first time in almost 40 years, a NASA human-rated rocket has completed all steps needed to clear a critical design review (CDR). The agency’s Space Launch System (SLS) is the first vehicle designed to meet the challenges of the journey to Mars and the first exploration class rocket since the Saturn V. The CDR provided a final look at the design and development of the integrated launch vehicle before full-scale fabrication begins.
Also as part of the CDR, the program concluded the core stage of the rocket and Launch Vehicle Stage Adapter will remain orange, the natural color of the insulation that will cover those elements, instead of painted white.
Image Credit: NASA/MSFC
(Artist concept updated Oct. 20, 2015)
In view are Artemis I Space Launch System main engines in High Bay 3 of the Vehicle Assembly Building at NASA’s Kennedy Space Center in Florida on Jan. 10, 2022. The engines will be gimbled, or moved in unison in different directions, during processing and checkout. Artemis I will be the first integrated test of NASA’s deep space exploration systems: the Orion spacecraft, Space Launch System (SLS) rocket and the ground systems at Kennedy. In later missions, NASA will land the first woman and the first person of color on the surface of the Moon, paving the way for a long-term lunar presence and serving as a steppingstone on the way to Mars. Photo credit: NASA/Corey Houston
This close up of the crew access arm shows all work platforms retracted from around NASA’s Artemis II SLS (Space Launch System) rocket and Orion spacecraft, secured to the mobile launcher, inside the Vehicle Assembly Building on Saturday, Jan. 17, 2026, in preparation for rollout to Launch Complex 39B at NASA’s Kennedy Space Center in Florida. NASA’s Artemis II flight test will take Commander Reid Wiseman, Pilot Victor Glover, and Mission Specialist Christina Koch from NASA, and Mission Specialist Jeremy Hansen from the CSA (Canadian Space Agency), around the Moon and back to Earth no later than no later than April 2026. Photo credit: NASA/Frank Michaux
NASA image use policy.
Liftoff! NASA’s Space Launch System carrying the Orion spacecraft lifts off the pad at Launch Complex 39B at the agency’s Kennedy Space Center in Florida at 1:47 a.m. EST on Nov. 16, 2022. The first in a series of increasingly complex missions, Artemis I will provide a foundation for human deep space exploration and demonstrate our commitment and capability to extend human presence to the Moon and beyond. The primary goal of Artemis I is to thoroughly test the integrated systems before crewed missions by operating the spacecraft in a deep space environment, testing Orion’s heat shield, and recovering the crew module after reentry, descent, and splashdown. Photo credit: NASA/Kevin Davis and Chris Coleman
Engineers at NASA’s Marshall Space Flight Center in Huntsville, Alabama, have successfully completed base heating testing on 2-percent scale models of the Space Launch System (SLS) propulsion system. SLS will be the most powerful rocket ever built for deep space missions, including to an asteroid placed in lunar orbit and ultimately to Mars. The SLS propulsion system uses two five-segment solid rocket boosters and four core stage RS-25 engines that burn liquid hydrogen and liquid oxygen. Sixty-five hot-fire tests using the mini models provided data on the convective heating environments that the base of the rocket will experience during ascent. Engineers have many months ahead analyzing that data, which will be used to verify flight hardware design environments and set specifications for the design of the rocket's base thermal protection system. The thermal protection system at the base of the vehicle keeps major hardware, wiring and the crew safe from the extreme heat the boosters and engines create while burning on ascent. The models were designed, built and tested by Marshall engineers, in close collaboration with CUBRC Inc. of Buffalo, New York. Watch one of the tests. (NASA/MSFC)
Inside High Bay 3 of the Vehicle Assembly Building at NASA’s Kennedy Space Center in Florida, the work platforms have been retracted from around the Artemis I Space Launch System atop the mobile launcher on Sept. 20, 2021. All 10 levels of platforms were extended and retracted as part of an umbilical test. During the test, several umbilical arms on the mobile launcher were extended to connect to the SLS rocket. They swung away from the launch vehicle, just as they will on launch day. NASA and Jacobs teams will continue conducting tests inside the VAB before transporting the Orion spacecraft to the assembly building and stacking it atop the SLS, completing assembly of the rocket for the Artemis I mission. Artemis I will be the first integrated test of the SLS and Orion spacecraft. In later missions, NASA will land the first woman and the first person of color on the surface of the Moon, paving the way for a long-term lunar presence and serving as a steppingstone on the way to Mars. Photo credit: NASA/Frank Michaux
Engineers and technicians at NASA’s Michoud Assembly Facility in New Orleans have attached all four RS-25 engines to the core stage for NASA’s Space Launch System (SLS) rocket that will help power the first Artemis mission to the Moon. To complete assembly of the rocket stage, crews are now integrating the propulsion and electrical systems within the structure. The completed core stage with all four RS-25 engines attached is the largest rocket stage NASA has built since the Saturn V stages for the Apollo Program that first sent Americans to the Moon. Engineers and technicians at Michoud attached the fourth RS-25 engine to the rocket stage Nov. 6 just one day after structurally mating the third engine. The first two RS-25 engines were structurally mated to the stage in October. Integration of the RS-25 engines to the recently attached engine section is a collaborative, multistep process for NASA and its partners Boeing, the core stage lead contractor, and Aerojet Rocketdyne, the RS-25 engines lead contractor. The four RS-25 engines, which are each roughly the size of a compact car, will together provide the SLS rocket 2 million of its 8.8 million pounds of maximum thrust. For more information about SLS, visit https://www.nasa.gov/sls.
Image credit: NASA
Liftoff! NASA's Space Launch System carrying the Orion spacecraft lifts off the pad at Launch Complex 39B at the agency's Kennedy Space Center in Florida at 1:47 a.m. EST on Nov. 16, 2022. The first in a series of increasingly complex missions, Artemis I will provide a foundation for human deep space exploration and demonstrate our commitment and capability to extend human presence to the Moon and beyond. The primary goal of Artemis I is to thoroughly test the integrated systems before crewed missions by operating the spacecraft in a deep space environment, testing Orion's heat shield, and recovering the crew module after reentry, descent, and splashdown. Photo credit: NASA/Kevin Davis and Chris Coleman
NASA conducted a full-duration RS-25 engine hot fire March 6, continuing a final round of certification testing for production of new engines to help power the SLS (Space Launch System) rocket on future Artemis missions to the Moon and beyond. The full-duration test on the Fred Haise Test Stand at NASA’s Stennis Space Center near Bay St. Louis, Mississippi, marked the ninth in a scheduled 12-test series. Engineers are collecting test data to certify an updated engine production process, using innovative manufacturing techniques, for lead engines contractor Aerojet Rocketdyne, an L3Harris Technologies company. During the March 6 test, Operators fired the certification engine for 10 minutes (600 seconds), longer than the amount of time needed to help launch the SLS rocket and send astronauts aboard the Orion spacecraft into orbit. The test team also fired the engine at power levels between 80% and 113% to test performance in multiple scenarios. Four RS-25 engines, along with a pair of solid rocket boosters, launch NASA’s powerful SLS rocket, producing more than 8.8 million pounds of thrust at liftoff for Artemis missions. Through Artemis, NASA will establish the foundation for long-term scientific exploration at the Moon, land the first woman, first person of color, and first international partner astronaut on the lunar surface, and prepare for human expeditions to Mars for the benefit of all. RS-25 tests at NASA Stennis are conducted by a diverse team of operators from NASA, Aerojet Rocketdyne, and Syncom Space Services, prime contractor for site facilities and operations.
Image credit: NASA/Danny Nowlin
#NASA #NASAMarshall #sls #spacelaunchsystem #nasasls #exploration #rocket #artemis #ssc #NASAStennis
Liftoff!!
At 1:48am (ET) Wednesday the #Artemis1 mission took flight, as the Space Launch System aka #SLS carried the Orion spacecraft to space.
#WeAreGoing? We just went…to the Moon!
Just amazing, and LOUD!
Liftoff! NASA’s Space Launch System carrying the Orion spacecraft lifts off the pad at Launch Complex 39B at the agency’s Kennedy Space Center in Florida at 1:47 a.m. EST on Nov. 16, 2022. The first in a series of increasingly complex missions, Artemis I will provide a foundation for human deep space exploration and demonstrate our commitment and capability to extend human presence to the Moon and beyond. The primary goal of Artemis I is to thoroughly test the integrated systems before crewed missions by operating the spacecraft in a deep space environment, testing Orion’s heat shield, and recovering the crew module after reentry, descent, and splashdown. Photo credit: NASA/Kevin Davis and Chris Coleman
NASA Administrator Bill Nelson (second from right) meets with members of the "red crew" after the launch of Artemis I at NASA's Kennedy Space Center in Florida on Nov. 16, 2022. Members of the red crew include Jacobs/TOSC ERC employees Billy Cairns, cryogenic engineering technician (left); Chad Garrett (second from left), safety engineer; and Trent Annis (right), cryogenic engineering technician. The team of technicians are part of the personnel specially trained to conduct operations at the launch pad during cryogenic loading operations at the launch pad. Prior to the launch of Artemis I, the red crew entered the zero deck, or base, of the mobile launcher and tightened several bolts to troubleshoot a valve used to replenish the core stage with liquid hydrogen which showed a leak with readings above limits. NASA has historically sent teams to the pad to conduct inspections during active launch operations as needed. Artemis I launch successfully at 1:47 a.m. EST on Nov. 16, from Kennedy's Launch Pad 39B. Photo credit: NASA/Sam Lott
NASA conducted the first hot fire of a new RS-25 test series Oct. 17, beginning the final round of certification testing ahead of production of an updated set of the engines for the SLS (Space Launch System) rocket. The engines will help power future Artemis missions to the Moon and beyond.
Operators fired the RS-25 engine for more than nine minutes (550 seconds), longer than the 500 seconds engines must fire during an actual mission, on the Fred Haise Test Stand at NASA’s Stennis Space Center, near Bay St. Louis, Mississippi. Operators also fired the engine up to the 111% power level needed during an SLS launch. The hot fire marked the first in a series of 12 tests scheduled to stretch into 2024. The tests are a key step for lead SLS engines contractor Aerojet Rocketdyne, an L3Harris Technologies company, to produce engines that will help power the SLS rocket, beginning with Artemis V.
Image credit: NASA
#NASA #NASAMarshall #sls #spacelaunchsystem #nasasls #exploration #rocket #artemis #ssc #StennisSpaceCenter #Stennis
NASA astronauts and astronaut candidates view NASA’s Artemis I Space Launch System and Orion spacecraft atop the mobile launcher on the pad at Launch Complex 39B at the agency’s Kennedy Space Center in Florida on Sept. 2, 2022. The astronauts are, from left to right: Zena Cardman (partially obscured), NASA astronaut; Deniz Burnham and Anil Menon, NASA astronaut candidates; Anne McClain, NASA astronaut; Marcos Berrios, NASA astronaut candidate; and Victor Glover, NASA astronaut. The first in a series of increasingly complex missions, Artemis I will provide a foundation for human deep space exploration and demonstrate our commitment and capability to extend human presence to the Moon and beyond. The primary goal of Artemis I is to thoroughly test the integrated systems before crewed missions by operating the spacecraft in a deep space environment, testing Orion’s heat shield, and recovering the crew module after reentry, descent, and splashdown. In later missions, NASA will land the first woman and the first person of color on the surface of the Moon, paving the way for a long-term lunar presence and serving as a steppingstone on the way to Mars. Credit: NASA/Steven Seipel