View allAll Photos Tagged RoofInsulation
Insulfoam for under-slab insulation
Project Profile: APS Nutrition and Food Warehouse, replaced specified XPS with R-Tech VI 40/psi over sub slab freezer floor, 2 lifts of 3" R-Tech instead of 3 lifts of 2" XPS. Saved concrete contractor approximately $20K in material costs.
Commercial Concrete Contractor: Cleo J. Powell, Inc.
Distribution partner: Zia Concrete Supply Company Inc.
More product information:
Insulfoam Facebook:
Insulfoam Twitter:
twitter.com/#!/Insulfoam
Refurbishment to the old Victorian shopping centre, also showing lead upstands and a slate roof. Just goes to demonstrate how well the RubberBond membrane blends in with traditional roofing materials.
Stage 1 of domestic flat roof with sky lights. Picture shows the first section of membrane cut and loose laid prior to being fully bonded to the decking and upstands. The first section is installed using the 1.5m wide roll of RubberBond roofing membrane giving no wastage and minimal cuts to the flat roof.
Tapered InsulFoam is cut from the same high-quality stock as our flat InsulFoam products, and meets or exceeds the requirements of ASTM C578, Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation. Tapered panels were used for increasing slope for additional drainage and offers a long-term, stable R-Value and has excellent dimensional stability, compressive strength and water resistant properties.
Project Location: Phoenix, AZ
Full taper package and crickets under Carlisle Syntec .060 mechanically attached TPO. Used: InsulFoam I tapered system.
Roofing Contractor: Gryphon Roofing
More product information:
Insulfoam Facebook:
Insulfoam Twitter:
twitter.com/#!/Insulfoam
Forks High School in the Quillayute Valley School District is updating and adding a new building to it's campus. Once the new school is completed, portions of the school that were built in 1963 will be demolished (the portion built in 1925 has already been demolished).
The new 39,500-square-foot building used Hunter Panels' 3.6 Cool Vent product for their roofing. Why Cool Vent? Cool Vent is a ventilated insulation roofing product that is comprised of a bottom layer of polyiso insulation, middle layer of wood spacers with a 1", 1.5" or 2" airspace and a top layer of OSB or plywood. Cool-Vent features cross directional airflow keeping roof temperatures constant, further eliminating hot and cold spots on the roof. Finish roofing system- can be topped off with shingles, shakes, metal or tile over the Hunter Cool-Vent Panels.
Want more on Hunter's Cool-Vent Product: www.hpanels.com/images/stories/pdfs/lit_prod_color/englis...
Roofing Contractor: Advanced Construction & Roofing
Insulfoam for under-slab insulation
Project Profile: APS Nutrition and Food Warehouse, replaced specified XPS with R-Tech VI 40/psi over sub slab freezer floor, 2 lifts of 3" R-Tech instead of 3 lifts of 2" XPS. Saved concrete contractor approximately $20K in material costs.
Commercial Concrete Contractor: Cleo J. Powell, Inc.
Distribution partner: Zia Concrete Supply Company Inc.
More product information:
Insulfoam Facebook:
Insulfoam Twitter:
twitter.com/#!/Insulfoam
Tapered InsulFoam is cut from the same high-quality stock as our flat InsulFoam products, and meets or exceeds the requirements of ASTM C578, Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation. Tapered panels were used for increasing slope for additional drainage and offers a long-term, stable R-Value and has excellent dimensional stability, compressive strength and water resistant properties.
Project Location: Phoenix, AZ
Full taper package and crickets under Carlisle Syntec .060 mechanically attached TPO. Used: InsulFoam I tapered system.
Roofing Contractor: Gryphon Roofing
More product information:
Insulfoam Facebook:
Insulfoam Twitter:
twitter.com/#!/Insulfoam
Tapered InsulFoam is cut from the same high-quality stock as our flat InsulFoam products, and meets or exceeds the requirements of ASTM C578, Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation. Tapered panels were used for increasing slope for additional drainage and offers a long-term, stable R-Value and has excellent dimensional stability, compressive strength and water resistant properties.
Project Location: Phoenix, AZ
Full taper package and crickets under Carlisle Syntec .060 mechanically attached TPO. Used: InsulFoam I tapered system.
Roofing Contractor: Gryphon Roofing
More product information:
Insulfoam Facebook:
Insulfoam Twitter:
twitter.com/#!/Insulfoam
Tapered InsulFoam is cut from the same high-quality stock as our flat InsulFoam products, and meets or exceeds the requirements of ASTM C578, Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation. Tapered panels were used for increasing slope for additional drainage and offers a long-term, stable R-Value and has excellent dimensional stability, compressive strength and water resistant properties.
Project Location: Phoenix, AZ
Full taper package and crickets under Carlisle Syntec .060 mechanically attached TPO. Used: InsulFoam I tapered system.
Roofing Contractor: Gryphon Roofing
More product information:
Insulfoam Facebook:
Insulfoam Twitter:
twitter.com/#!/Insulfoam
Forks High School in the Quillayute Valley School District is updating and adding a new building to it's campus. Once the new school is completed, portions of the school that were built in 1963 will be demolished (the portion built in 1925 has already been demolished).
The new 39,500-square-foot building used Hunter Panels' 3.6 Cool Vent product for their roofing. Why Cool Vent? Cool Vent is a ventilated insulation roofing product that is comprised of a bottom layer of polyiso insulation, middle layer of wood spacers with a 1", 1.5" or 2" airspace and a top layer of OSB or plywood. Cool-Vent features cross directional airflow keeping roof temperatures constant, further eliminating hot and cold spots on the roof. Finish roofing system- can be topped off with shingles, shakes, metal or tile over the Hunter Cool-Vent Panels.
Want more on Hunter's Cool-Vent Product: www.hpanels.com/images/stories/pdfs/lit_prod_color/englis...
Roofing Contractor: Advanced Construction & Roofing
T.iles Roofing LTD - We do all aspects of roofing including flat roofing, velux windows and loft conversions.
RubberBond flat roof project installed on a block of flats. Here the membrane has also been used to line the box gutters.
Forks High School in the Quillayute Valley School District is updating and adding a new building to it's campus. Once the new school is completed, portions of the school that were built in 1963 will be demolished (the portion built in 1925 has already been demolished).
The new 39,500-square-foot building used Hunter Panels' 3.6 Cool Vent product for their roofing. Why Cool Vent? Cool Vent is a ventilated insulation roofing product that is comprised of a bottom layer of polyiso insulation, middle layer of wood spacers with a 1", 1.5" or 2" airspace and a top layer of OSB or plywood. Cool-Vent features cross directional airflow keeping roof temperatures constant, further eliminating hot and cold spots on the roof. Finish roofing system- can be topped off with shingles, shakes, metal or tile over the Hunter Cool-Vent Panels.
Want more on Hunter's Cool-Vent Product: www.hpanels.com/images/stories/pdfs/lit_prod_color/englis...
Roofing Contractor: Advanced Construction & Roofing
Tapered InsulFoam is cut from the same high-quality stock as our flat InsulFoam products, and meets or exceeds the requirements of ASTM C578, Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation. Tapered panels were used for increasing slope for additional drainage and offers a long-term, stable R-Value and has excellent dimensional stability, compressive strength and water resistant properties.
Project Location: Phoenix, AZ
Full taper package and crickets under Carlisle Syntec .060 mechanically attached TPO. Used: InsulFoam I tapered system.
Roofing Contractor: Gryphon Roofing
More product information:
Insulfoam Facebook:
Insulfoam Twitter:
twitter.com/#!/Insulfoam
Forks High School in the Quillayute Valley School District is updating and adding a new building to it's campus. Once the new school is completed, portions of the school that were built in 1963 will be demolished (the portion built in 1925 has already been demolished).
The new 39,500-square-foot building used Hunter Panels' 3.6 Cool Vent product for their roofing. Why Cool Vent? Cool Vent is a ventilated insulation roofing product that is comprised of a bottom layer of polyiso insulation, middle layer of wood spacers with a 1", 1.5" or 2" airspace and a top layer of OSB or plywood. Cool-Vent features cross directional airflow keeping roof temperatures constant, further eliminating hot and cold spots on the roof. Finish roofing system- can be topped off with shingles, shakes, metal or tile over the Hunter Cool-Vent Panels.
Want more on Hunter's Cool-Vent Product: www.hpanels.com/images/stories/pdfs/lit_prod_color/englis...
Roofing Contractor: Advanced Construction & Roofing
Forks High School in the Quillayute Valley School District is updating and adding a new building to it's campus. Once the new school is completed, portions of the school that were built in 1963 will be demolished (the portion built in 1925 has already been demolished).
The new 39,500-square-foot building used Hunter Panels' 3.6 Cool Vent product for their roofing. Why Cool Vent? Cool Vent is a ventilated insulation roofing product that is comprised of a bottom layer of polyiso insulation, middle layer of wood spacers with a 1", 1.5" or 2" airspace and a top layer of OSB or plywood. Cool-Vent features cross directional airflow keeping roof temperatures constant, further eliminating hot and cold spots on the roof. Finish roofing system- can be topped off with shingles, shakes, metal or tile over the Hunter Cool-Vent Panels.
Want more on Hunter's Cool-Vent Product: www.hpanels.com/images/stories/pdfs/lit_prod_color/englis...
Roofing Contractor: Advanced Construction & Roofing
Forks High School in the Quillayute Valley School District is updating and adding a new building to it's campus. Once the new school is completed, portions of the school that were built in 1963 will be demolished (the portion built in 1925 has already been demolished).
The new 39,500-square-foot building used Hunter Panels' 3.6 Cool Vent product for their roofing. Why Cool Vent? Cool Vent is a ventilated insulation roofing product that is comprised of a bottom layer of polyiso insulation, middle layer of wood spacers with a 1", 1.5" or 2" airspace and a top layer of OSB or plywood. Cool-Vent features cross directional airflow keeping roof temperatures constant, further eliminating hot and cold spots on the roof. Finish roofing system- can be topped off with shingles, shakes, metal or tile over the Hunter Cool-Vent Panels.
Want more on Hunter's Cool-Vent Product: www.hpanels.com/images/stories/pdfs/lit_prod_color/englis...
Roofing Contractor: Advanced Construction & Roofing
EPDM flat roof on a small rear extension in Oxford. Whether it’s a small or large flat roof, a refurbishment or a new build your local contractor will be able to help you.
Visit us at www.rubberbond.co.uk/homeowner/ to learn more and get in contact.
We are here to help.
Tapered InsulFoam is cut from the same high-quality stock as our flat InsulFoam products, and meets or exceeds the requirements of ASTM C578, Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation. Tapered panels were used for increasing slope for additional drainage and offers a long-term, stable R-Value and has excellent dimensional stability, compressive strength and water resistant properties.
Project Location: Phoenix, AZ
Full taper package and crickets under Carlisle Syntec .060 mechanically attached TPO. Used: InsulFoam I tapered system.
Roofing Contractor: Gryphon Roofing
More product information:
Insulfoam Facebook:
Insulfoam Twitter:
twitter.com/#!/Insulfoam
Tapered InsulFoam is cut from the same high-quality stock as our flat InsulFoam products, and meets or exceeds the requirements of ASTM C578, Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation. Tapered panels were used for increasing slope for additional drainage and offers a long-term, stable R-Value and has excellent dimensional stability, compressive strength and water resistant properties.
Project Location: Phoenix, AZ
Full taper package and crickets under Carlisle Syntec .060 mechanically attached TPO. Used: InsulFoam I tapered system.
Roofing Contractor: Gryphon Roofing
More product information:
Insulfoam Facebook:
Insulfoam Twitter:
twitter.com/#!/Insulfoam
Forks High School in the Quillayute Valley School District is updating and adding a new building to it's campus. Once the new school is completed, portions of the school that were built in 1963 will be demolished (the portion built in 1925 has already been demolished).
The new 39,500-square-foot building used Hunter Panels' 3.6 Cool Vent product for their roofing. Why Cool Vent? Cool Vent is a ventilated insulation roofing product that is comprised of a bottom layer of polyiso insulation, middle layer of wood spacers with a 1", 1.5" or 2" airspace and a top layer of OSB or plywood. Cool-Vent features cross directional airflow keeping roof temperatures constant, further eliminating hot and cold spots on the roof. Finish roofing system- can be topped off with shingles, shakes, metal or tile over the Hunter Cool-Vent Panels.
Want more on Hunter's Cool-Vent Product: www.hpanels.com/images/stories/pdfs/lit_prod_color/englis...
Roofing Contractor: Advanced Construction & Roofing
Forks High School in the Quillayute Valley School District is updating and adding a new building to it's campus. Once the new school is completed, portions of the school that were built in 1963 will be demolished (the portion built in 1925 has already been demolished).
The new 39,500-square-foot building used Hunter Panels' 3.6 Cool Vent product for their roofing. Why Cool Vent? Cool Vent is a ventilated insulation roofing product that is comprised of a bottom layer of polyiso insulation, middle layer of wood spacers with a 1", 1.5" or 2" airspace and a top layer of OSB or plywood. Cool-Vent features cross directional airflow keeping roof temperatures constant, further eliminating hot and cold spots on the roof. Finish roofing system- can be topped off with shingles, shakes, metal or tile over the Hunter Cool-Vent Panels.
Want more on Hunter's Cool-Vent Product: www.hpanels.com/images/stories/pdfs/lit_prod_color/englis...
Roofing Contractor: Advanced Construction & Roofing
Second run of flat roof membrane installed by approved contractors.
Weatherability is the key reason why more EPDM roofs continue to perform in the existing inventory than any other single ply membrane. In addition to excellent weathering characteristics, EPDM is a low maintenance roofing system that offers superior wind, hail and fire resistance.
See more at www.rubberbond.co.uk/environmental/epdm_lasts/
The Vernon C. Russell Water Treatment Plant, the primary drinking water source for the towns of Danvers and Middleton, is currently halfway through a major, 24-month, $20 million rehabilitation and expansion project. Hunter Panels Polyiso has been installed as part of the facility's roof system.
Construction will enhance treatment effectiveness, improve water quality, and allow the facility to meet drinking water regulatory requirements over the next 20 years.
Roof System:
-Concrete Deck
-2 layers of 2.0 Hunter ISO
- 1/4" Slope Tapered System
-0.5" Dens-Deck
-Duro-Last membrane / Ballast
The Dens-Deck and ISO were mechanically fastened to the deck. The membrane was fully adhered to the Dens-Deck and the membrane was then covered with ballast.
More on Hunter Panels: hpanels.com/
General Contractor: Waterline Industries
Stage 2 First section of flat roof membrane bonded into place and second section loose laid whilst decking is being finished. The roofing membrane can be easily folded to expose the decking prior to bonding the membrane into place.
The Vernon C. Russell Water Treatment Plant, the primary drinking water source for the towns of Danvers and Middleton, is currently halfway through a major, 24-month, $20 million rehabilitation and expansion project. Hunter Panels Polyiso has been installed as part of the facility's roof system.
Construction will enhance treatment effectiveness, improve water quality, and allow the facility to meet drinking water regulatory requirements over the next 20 years.
Roof System:
-Concrete Deck
-2 layers of 2.0 Hunter ISO
- 1/4" Slope Tapered System
-0.5" Dens-Deck
-Duro-Last membrane / Ballast
The Dens-Deck and ISO were mechanically fastened to the deck. The membrane was fully adhered to the Dens-Deck and the membrane was then covered with ballast.
More on Hunter Panels: hpanels.com/
General Contractor: Waterline Industries
Insulation Home, Installers providing loft insulation, insulation installers, roof insulation, wall insulation, home insulation, thermal insulation.
Tapered InsulFoam is cut from the same high-quality stock as our flat InsulFoam products, and meets or exceeds the requirements of ASTM C578, Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation. Tapered panels were used for increasing slope for additional drainage and offers a long-term, stable R-Value and has excellent dimensional stability, compressive strength and water resistant properties.
Project Location: Phoenix, AZ
Full taper package and crickets under Carlisle Syntec .060 mechanically attached TPO. Used: InsulFoam I tapered system.
Roofing Contractor: Gryphon Roofing
More product information:
Insulfoam Facebook:
Insulfoam Twitter:
twitter.com/#!/Insulfoam
Tapered InsulFoam is cut from the same high-quality stock as our flat InsulFoam products, and meets or exceeds the requirements of ASTM C578, Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation. Tapered panels were used for increasing slope for additional drainage and offers a long-term, stable R-Value and has excellent dimensional stability, compressive strength and water resistant properties.
Project Location: Phoenix, AZ
Full taper package and crickets under Carlisle Syntec .060 mechanically attached TPO. Used: InsulFoam I tapered system.
Roofing Contractor: Gryphon Roofing
More product information:
Insulfoam Facebook:
Insulfoam Twitter:
twitter.com/#!/Insulfoam
May 22nd marked the day one year ago that the deadliest twister since 1947 largely destroyed the former St. John's Regional Medical Center in Joplin and leveled much of the town.
The new factory built Mercy hospital is 30% stronger than requirements for the old hospital. And the facility is the largest acute care hospital ever built with modular construction.
Insulfoam was used to help roof combat strength, water absorption, stability, stable R-value and excellent performance. Photos show 15" thick tapered Insulfoam product being loaded onto the roof.
More product information:
Insulfoam Facebook:
Insulfoam Twitter:
T.iles Roofing LTD - We do all aspects of roofing including flat roofing, velux windows and loft conversions.
The new Ajo Border Patrol Station is designed for economy of motion to increase overall efficiency. At 52,900 sq ft, the new station includes energy efficient polyiso cover board, solar panels and storm water polution prevention system.
Hunter's high density polyiso cover board has the following features in one durable roofing product:
-Impact resistance
-Mold Resistance
-Energy Savings
-Ease of Installation
Lightweight and easy to cut- savings from reduced transportation, labor & material costs during installation. Our H-Shield HD cover board has the highest thermal performance of any 1/2" insulation cover board at R-value of 2.5.
-1/2" with R-2.5, versus alternative cover boards at an R-0.5
-Weighs 11lbs per 4'x8' Board
-High Density > 100 psi
-Achieved FM severe hail rating
-90% lighter than gypsum alternatives
-Easier to cut & handle than gypsum alternatives
Sustainable Roofing: Division Seven Systems, www.divisionsevensystems.com/Pages/default.aspx
More info: www.hpanels.com/
Hunter Twitter:
Hunter Facebook:
New York Insulation
Henrietta, NY, 14467
(585) 250-6248
New York Insulation in Henrietta NY provides Residential and Commercial Insulation, not so much on Spray foam, continuous insulation (ci),Sound proofing attic insulation, batt insulation, blow-in insulation, rigid insulation. Call us now!
continuous insulation
Rush, NY
Insulation Contractor, Attic Insulation, Roof Insulation, Wall Insulation, Batt Insulation, Insulation Service
The new Ajo Border Patrol Station is designed for economy of motion to increase overall efficiency. At 52,900 sq ft, the new station includes energy efficient polyiso cover board composite, solar panels and storm water polution prevention system.
Hunter's high density polyiso cover board composite has the following features in one durable roofing product:
-Impact resistance
-Mold Resistance
-Energy Savings
-Ease of Installation
Lightweight and easy to cut- savings from reduced transportation, labor & material costs during installation. Our H-Shield HD cover board has the highest thermal performance of any 1/2" insulation cover board at R-value of 2.5.
-1/2" with R-2.5, versus alternative cover boards at an R-0.5
-Weighs 11lbs per 4'x8' Board
-High Density > 100 psi
-Achieved FM severe hail rating
-90% lighter than gypsum alternatives
-Easier to cut & handle than gypsum alternatives
Sustainable Roofing: Division Seven Systems, www.divisionsevensystems.com/Pages/default.aspx
More info: www.hpanels.com/
Hunter Twitter:
Hunter Facebook:
Here is the last section of the roof being laid, a small example of how the decking adhesive is applied to the roof area. See more about our adhesives at www.rubberbond.co.uk/products/adhesives/
The Vernon C. Russell Water Treatment Plant, the primary drinking water source for the towns of Danvers and Middleton, is currently halfway through a major, 24-month, $20 million rehabilitation and expansion project. Hunter Panels Polyiso has been installed as part of the facility's roof system.
Construction will enhance treatment effectiveness, improve water quality, and allow the facility to meet drinking water regulatory requirements over the next 20 years.
Roof System:
-Concrete Deck
-2 layers of 2.0 Hunter ISO
- 1/4" Slope Tapered System
-0.5" Dens-Deck
-Duro-Last membrane / Ballast
The Dens-Deck and ISO were mechanically fastened to the deck. The membrane was fully adhered to the Dens-Deck and the membrane was then covered with ballast.
More on Hunter Panels: hpanels.com/
General Contractor: Waterline Industries
The Vernon C. Russell Water Treatment Plant, the primary drinking water source for the towns of Danvers and Middleton, is currently halfway through a major, 24-month, $20 million rehabilitation and expansion project. Hunter Panels Polyiso has been installed as part of the facility's roof system.
Construction will enhance treatment effectiveness, improve water quality, and allow the facility to meet drinking water regulatory requirements over the next 20 years.
Roof System:
-Concrete Deck
-2 layers of 2.0 Hunter ISO
- 1/4" Slope Tapered System
-0.5" Dens-Deck
-Duro-Last membrane / Ballast
The Dens-Deck and ISO were mechanically fastened to the deck. The membrane was fully adhered to the Dens-Deck and the membrane was then covered with ballast.
More on Hunter Panels: hpanels.com/
General Contractor: Waterline Industries
The Vernon C. Russell Water Treatment Plant, the primary drinking water source for the towns of Danvers and Middleton, is currently halfway through a major, 24-month, $20 million rehabilitation and expansion project. Hunter Panels Polyiso has been installed as part of the facility's roof system.
Construction will enhance treatment effectiveness, improve water quality, and allow the facility to meet drinking water regulatory requirements over the next 20 years.
Roof System:
-Concrete Deck
-2 layers of 2.0 Hunter ISO
- 1/4" Slope Tapered System
-0.5" Dens-Deck
-Duro-Last membrane / Ballast
The Dens-Deck and ISO were mechanically fastened to the deck. The membrane was fully adhered to the Dens-Deck and the membrane was then covered with ballast.
More on Hunter Panels: hpanels.com/
General Contractor: Waterline Industries
The new Ajo Border Patrol Station is designed for economy of motion to increase overall efficiency. At 52,900 sq ft, the new station includes energy efficient polyiso cover board, solar panels and storm water polution prevention system.
Hunter's high density polyiso cover board has the following features in one durable roofing product:
-Impact resistance
-Mold Resistance
-Energy Savings
-Ease of Installation
Lightweight and easy to cut- savings from reduced transportation, labor & material costs during installation. Our H-Shield HD cover board has the highest thermal performance of any 1/2" insulation cover board at R-value of 2.5.
-1/2" with R-2.5, versus alternative cover boards at an R-0.5
-Weighs 11lbs per 4'x8' Board
-High Density > 100 psi
-Achieved FM severe hail rating
-90% lighter than gypsum alternatives
-Easier to cut & handle than gypsum alternatives
Sustainable Roofing: Division Seven Systems, www.divisionsevensystems.com/Pages/default.aspx
More info: www.hpanels.com/
Hunter Twitter:
Hunter Facebook:
Forks High School in the Quillayute Valley School District is updating and adding a new building to it's campus. Once the new school is completed, portions of the school that were built in 1963 will be demolished (the portion built in 1925 has already been demolished).
The new 39,500-square-foot building used Hunter Panels' 3.6 Cool Vent product for their roofing. Why Cool Vent? Cool Vent is a ventilated insulation roofing product that is comprised of a bottom layer of polyiso insulation, middle layer of wood spacers with a 1", 1.5" or 2" airspace and a top layer of OSB or plywood. Cool-Vent features cross directional airflow keeping roof temperatures constant, further eliminating hot and cold spots on the roof. Finish roofing system- can be topped off with shingles, shakes, metal or tile over the Hunter Cool-Vent Panels.
Want more on Hunter's Cool-Vent Product: www.hpanels.com/images/stories/pdfs/lit_prod_color/englis...
Roofing Contractor: Advanced Construction & Roofing
The Vernon C. Russell Water Treatment Plant, the primary drinking water source for the towns of Danvers and Middleton, is currently halfway through a major, 24-month, $20 million rehabilitation and expansion project. Hunter Panels Polyiso has been installed as part of the facility's roof system.
Construction will enhance treatment effectiveness, improve water quality, and allow the facility to meet drinking water regulatory requirements over the next 20 years.
Roof System:
-Concrete Deck
-2 layers of 2.0 Hunter ISO
- 1/4" Slope Tapered System
-0.5" Dens-Deck
-Duro-Last membrane / Ballast
The Dens-Deck and ISO were mechanically fastened to the deck. The membrane was fully adhered to the Dens-Deck and the membrane was then covered with ballast.
More on Hunter Panels: hpanels.com/
General Contractor: Waterline Industries
Let us simplify your next RubberBond EPDM roof installation by using Pressure-Sensitive Pipe Seals.
PS Pipe Seals are cured, pre-molded EPDM flashing for pipes up to 150mm in diameter. .
The new Ajo Border Patrol Station is designed for economy of motion to increase overall efficiency. At 52,900 sq ft, the new station includes energy efficient polyiso cover board, solar panels and storm water polution prevention system.
Hunter's high density polyiso cover board has the following features in one durable roofing product:
-Impact resistance
-Mold Resistance
-Energy Savings
-Ease of Installation
Lightweight and easy to cut- savings from reduced transportation, labor & material costs during installation. Our H-Shield HD cover board has the highest thermal performance of any 1/2" insulation cover board at R-value of 2.5.
-1/2" with R-2.5, versus alternative cover boards at an R-0.5
-Weighs 11lbs per 4'x8' Board
-High Density > 100 psi
-Achieved FM severe hail rating
-90% lighter than gypsum alternatives
-Easier to cut & handle than gypsum alternatives
Sustainable Roofing: Division Seven Systems, www.divisionsevensystems.com/Pages/default.aspx
More info: www.hpanels.com/
Hunter Twitter:
Hunter Facebook:
The new Ajo Border Patrol Station is designed for economy of motion to increase overall efficiency. At 52,900 sq ft, the new station includes energy efficient polyiso cover board, solar panels and storm water polution prevention system.
Hunter's high density polyiso cover board has the following features in one durable roofing product:
-Impact resistance
-Mold Resistance
-Energy Savings
-Ease of Installation
Lightweight and easy to cut- savings from reduced transportation, labor & material costs during installation. Our H-Shield HD cover board has the highest thermal performance of any 1/2" insulation cover board at R-value of 2.5.
-1/2" with R-2.5, versus alternative cover boards at an R-0.5
-Weighs 11lbs per 4'x8' Board
-High Density > 100 psi
-Achieved FM severe hail rating
-90% lighter than gypsum alternatives
-Easier to cut & handle than gypsum alternatives
Sustainable Roofing: Division Seven Systems, www.divisionsevensystems.com/Pages/default.aspx
More info: www.hpanels.com/
Hunter Twitter:
Hunter Facebook:
The new Ajo Border Patrol Station is designed for economy of motion to increase overall efficiency. At 52,900 sq ft, the new station includes energy efficient polyiso cover board, solar panels and storm water polution prevention system.
Hunter's high density polyiso cover board has the following features in one durable roofing product:
-Impact resistance
-Mold Resistance
-Energy Savings
-Ease of Installation
Lightweight and easy to cut- savings from reduced transportation, labor & material costs during installation. Our H-Shield HD cover board has the highest thermal performance of any 1/2" insulation cover board at R-value of 2.5.
-1/2" with R-2.5, versus alternative cover boards at an R-0.5
-Weighs 11lbs per 4'x8' Board
-High Density > 100 psi
-Achieved FM severe hail rating
-90% lighter than gypsum alternatives
-Easier to cut & handle than gypsum alternatives
Sustainable Roofing: Division Seven Systems, www.divisionsevensystems.com/Pages/default.aspx
More info: www.hpanels.com/
Hunter Twitter:
Hunter Facebook:
The Vernon C. Russell Water Treatment Plant, the primary drinking water source for the towns of Danvers and Middleton, is currently halfway through a major, 24-month, $20 million rehabilitation and expansion project. Hunter Panels Polyiso has been installed as part of the facility's roof system.
Construction will enhance treatment effectiveness, improve water quality, and allow the facility to meet drinking water regulatory requirements over the next 20 years.
Roof System:
-Concrete Deck
-2 layers of 2.0 Hunter ISO
- 1/4" Slope Tapered System
-0.5" Dens-Deck
-Duro-Last membrane / Ballast
The Dens-Deck and ISO were mechanically fastened to the deck. The membrane was fully adhered to the Dens-Deck and the membrane was then covered with ballast.
More on Hunter Panels: hpanels.com/
General Contractor: Waterline Industries
The Vernon C. Russell Water Treatment Plant, the primary drinking water source for the towns of Danvers and Middleton, is currently halfway through a major, 24-month, $20 million rehabilitation and expansion project. Hunter Panels Polyiso has been installed as part of the facility's roof system.
Construction will enhance treatment effectiveness, improve water quality, and allow the facility to meet drinking water regulatory requirements over the next 20 years.
Roof System:
-Concrete Deck
-2 layers of 2.0 Hunter ISO
- 1/4" Slope Tapered System
-0.5" Dens-Deck
-Duro-Last membrane / Ballast
The Dens-Deck and ISO were mechanically fastened to the deck. The membrane was fully adhered to the Dens-Deck and the membrane was then covered with ballast.
More on Hunter Panels: hpanels.com/
General Contractor: Waterline Industries