View allAll Photos Tagged Remove
By removing the "pwrsel" jumper on MaxM and shorting all three "pwrsel" pins together with a scrap piece of wire, a MaxM can be made to power a FreeM. The MaxM must then be powered by an external power source via its 2.1mm barrel connector.
The FreeM then in turn controls the MaxM, making for an IR-remote controlled MaxM.
Progress in April 2017 to remove the level crossing at Corrigan Road in Noble Park including rebuilding of the railway station. The project part of a larger one to remove the remaining level crossings between Caulfield and Dandenong.
In this area a new two track viaduct is being built to elevate the line above Corrigan Road and nearby Heatherton Road which requires rebuilding of the station at the Noble Park end of the structure with Sandown Park station unchanged. The new lines are being built adjacent to the existing ones with the bridges formed using precast Super-T beams. This is part of the controversial 'Skyrail' treatment used to elevate the lines above the road with similar designs employed at Chandler Road and between Oakleigh and Caulfeild stations - the latter being more of an issue with properties backing onto the line.
My favorite picture. It was dam cold to wait in the dock for the right color in the sky. But it was all worth it !!
This photo meets the requirements of the assignment because the two tree stumps in the photo have been removed. They definitely distracted from the feel of this snowy day picture. I like the way the front steps lead you down into the picture.
I would use this picture to evoke a response in writing class. The prompt would be something like "What is happening inside the house on this snowy day?"
I learned many things attempting to eliminate the tree stumps. It is easier to cover up objects using a bigger brush. Choose the area carefully or it shows up as brighter or different from the selected area.
Plaza is a Spanish word related to "field" which describes an open urban public space, such as a city square. All through Spanish America, the plaza mayor of each center of administration held three closely related institutions: the cathedral, the cabildo or administrative center, which might be incorporated in a wing of a governor's palace, and the audiencia or law court. The plaza might be large enough to serve as a military parade ground. At times of crisis or fiesta, it was the space where a large crowd might gather. Like the Italian piazza, the plaza remains a center of community life that is only equalled by the market-place.
Most colonial cities in Spanish America were planned around a square plaza de armas, where troops could be mustered, as the name implies, surrounded by the governor's palace and the main church.
-Wikepidia
This is the Plaza Las Delicias in Ponce Puerto Rico. Most major cities on the Island have a plaza which indeed served as the center of community activity and gathering. The Cathedral lays behind me.
Most of the time people take pictures with some unwanted things, that ruin the beauty of that picture. People wish something according to their own desire, in these cases photoshop has different tools and tricks to have the images in preferred background.
Nikon D40
Focal Length: 300mm
Optimize Image: Custom
Color Mode: Mode IIIa (sRGB)
Long Exposure NR: Off
High ISO NR: Off
2008/04/03 14:48:07.4
Exposure Mode: Aperture Priority
White Balance: Auto
Tone Comp.: Auto
Compressed RAW (12-bit)
Metering Mode: Multi-Pattern
AF Mode: AF-S
Hue Adjustment: 0°
1/2000 sec - F/8
Flash Sync Mode: Not Attached
Saturation: Auto
Color
Exposure Comp.: -1.0 EV
Sharpening: Medium high
Lens: 100-300mm F/4D Sigma
Sensitivity: ISO 200
Image Comment: (c) Gerard Prins All rights reserved
Tel.: (56) 22758 7209
Jefferson's bookbinder alternately glued one or two 1 cm wide folded paper "stubs" onto the centerfold of each folio. The stubs added thickness to the spine side of the pages to compensate for the added thickness in the middle where Jefferson had glued the clippings. The stubs were causing damage to Jefferson's pages when the book was opened. Ninety-eight percent of Jefferson's pages had either torn or cracked where they came into contact with the stubs as the book was opened. The conservators removed the stubs by applying a water-based poultice to them, which softened the adhesive, and gently separating the stubs from the Jefferson pages using a micro-spatula. The stubs were labeled and placed in protective enclosures as part of the artifact's historical record. Watermarks on the stubs indicate that this paper was made by P.A. Mesier between the years 1817-1822.
We needed to keep his ear still so it would not bleed anymore. The ACE bandage was not really working, so Jen made a ear bra. The vet gave her the idea. She grabbed some fleece and made this hood for Jett to wear.
He does not like the ear bra, but it is better than the cone.
Now remove the screw. You will just have to turn 3½ times. And hold the entire cube firmly. Otherwise you may end up many parts falling out clumsily.
Slight change of subject here as having delved into one of my Dads odds and sods boxes I have come across some postcards. They are of an age were I am hoping I am not infringing anyone's copyright, but please let me know if I am and I will remove the image.
Another Sweetman and Son, this time 10333 Patriot 45521 on The Red Rose.
As the tide starts to come in you can see the change in habitat now that the tidegate is removed.
You are free to use this image with the following photo credit: Roy W. Lowe / USFWS
I then removed the two hinge covers which are just snapped in place, under them are two screws holding the keyboard cover in place.
REMOVE TRUMP / SWARM THE SENATE Rally at the Atrium in the Hart Office Building at 200 Independence Avenue, NE, Washington DC on Friday morning, 31 January 2020 by Elvert Barnes Photography
Follow REMOVE TRUMP at www.facebook.com/RemoveTrump45/
Elvert Barnes PROTEST PHOTOGRAPHY 2020 at elvertbarnes.com/protests2020.html
Those are just suggestions, but the theme is, you should spread out categories of use across multiple drives, and allocate drive speed to those tasks that need it most. Granted, we are on the brink of an all-SSD world, but they’re still expensive, and one versatile way to maximize their use is to put them into removable cartridges, for mobility and swapping projects. Seen here, the Vantec slot at the top of the enclosure’s face takes accepts a proprietary cartridge that not only connects straight into the motherboard’s native SATA3 6Gbit/s bus for maximum speed, but also has a reasonably fast USB 3.0 port for when you need to go mobile from a laptop. I am putting 1TB SSDs of camera footage into these cartridges, letting me swap between projects, and I take them with me to other workstations between studios, and on the road. It’s a clever solution that never quite caught on, but it’s still available, cheap, and highly recommended.
Lynda and Chad's crew started by removing the old porch. Most people would have to pull nails to get the floor boards up, but not this crew of superheroes.
You are not allowed to wear shoes in a mosque. And they give you little booties to wear over your socks.
It's back to being a regular brick. You can tell it's the one because of the caulk smear from the light brick.
“...Our readers will perceive the Advocate is embellished with an elegant emblematical design, representing a collier in one of the most laborious of his occupations -viz.: removing his tools. The rose of England, the thistle of Scotland, the shamrock of Ireland, and the Welsh leek will be seen tied together by a ribband, representing a National Union, bound together by friendship and mutual interest. Indeed the whole design is beautiful, and does much credit both to the draftsman and engraver....”
Edited by William Daniels, The Miners' Advocate was begun in December 1843 as a replacement for The Miners' Journal, newspaper of the Miners' Association of Great Britain and Ireland. Initially it was printed and published in Newcastle by bookseller Thomas Dodds, with distribution in Lancashire undertaken by the Manchester bookseller James Leach. By March 1844 sales in Lancashire accounted for just under half the print run of 8000 copies.
With its “eloquent editorial and worthy educational items” -a reflection of the Chartist predilections of its publisher and editor- the paper sometimes struggled to engage its target readership of pitmen. As an “unstamped” publication, however, The Miners' Advocate faced other difficulties. Stamp duty had first been imposed on newspapers in 1712 and was charged on each copy sold, adding significantly to the cover price. The Newspaper and Stamp Duties Act 1819 clarified that liability extended to any journal which either a) contained any "public news, intelligence or occurrences, or any remarks or observations thereon, or upon any matter in Church or State" or b) appeared more frequently than every 26 days. Moreover, each publisher was compelled to deposit £200 with the government as surety against the possibility of future conviction for seditious or blasphemous libel. Although the Association had voted at its conference in March 1844 to comply with these requirements, and did so again at another conference in July, the necessary steps were not taken in time to prevent the commencement of legal proceedings against Thomas Dodds as publisher. Publication was suspended after the 18th issue, and when The Miners' Advocate was relaunched in May 1845 it was as a monthly rather than a fortnightly journal.
On 20 February 1847 The Newcastle Guardian and Tyne Mercury reported that “The Miner's Advocate... , which was discontinued in May last, has again been recommenced by Mr. Wm. Daniells, in a new and improved form. It is now printed and published in the Isle of Man - a change which is questionable, but which, we hope, may prove advantageous.” Several radical papers had by this time relocated to the Isle of Man, where they enjoyed not only freedom from stamp duty, paper duty and advertisement tax but also free postage to the UK mainland. “The Miners' Advocate and Manx Intellingencer” -as the paper was now called- was published by Robert Fargher in Douglas. A prospectus, dated 5 December 1846, said that it would be “an organ of instruction and communication for the miners of Great Britain, Ireland, and the Isle of Man, and its principal object will be to improve their condition, mentally, morally, and physically. It will develop more fully the capabilities of the Island as to its mining operations and will contain papers on geology, etc.” William Daniels continued as editor, and the proprietor was named as MAGB&I secretary William Grocott. Although the title had changed, the numbering of the Manx editions picked up where the second series of The Miner's Advocate, begun in May 1845, had left off.
In his “Bibliographical Account of Works Relating to the Isle of Man” (Manx Museum and Ancient Monuments Trustees, 1933), William Cubbon notes a reference to The Miners' Advocate and Manx Intelligencer having been printed on 21 April 1849. Fairly soon thereafter, however, it seems that the ending of the free postage concession and the jailing of much of the MAGB&I leadership -including William Grocott and James Leach- conspired to bring about its demise.
The above facsimile of the first issue was included in the republication of J B Smethurst's “Lancashire and the Miners' Association of Great Britain and Ireland” (Eccles & District Historical Society, 1969). Despite the compliments paid to the draftsman and engraver of the masthead in the editorial, neither of them is named in the piece and I have been unable to discover their identities. The design was subsequently adapted for use by “The Lancashire Miner”, which enjoyed a brief run in the 1980s.
A pneumatic spreader is used to forcibly remove the door of a wrecked vehicle. Visible inside the vehicle is one of the cadets playing 'victim'.
All these photos are unaltered .jpgs straight out of the camera.
These photos were taken by and provided courtesy of Photographer Katya Sandino
On 9/27/14 - 142 volunteers removed enough trash to completely fill a 40 dumpster which included 290 trash bags of litter from Bread and Cheese Creek (from the Berkshire Community to North Point Boulevard) and North Point Road. These photos show them hard at work on this day! 10 tires, 6 shopping carts, 4 cans of paint, 3 rugs, 2 TV’s, a mattress and box spring, a reclining couch, a 55 gallon drum, and a toilet were all items that were removed from this historic stream. Additionally 1 ton of metal was pulled from the creek and will be recycled with the money going toward helping to pay for our next cleanup. All food left over will be donated to Rita’s Table a local food kitchen dedicated to helping feed the needy of Dundalk. Thank you Volunteers you are worth your weight in gold and more!!!
We are a group of volunteers who worked with the community in association with National Public Lands Day, the Ocean Conservancy, American Rivers, Trash Free Maryland, and Day to Serve on this cleanup.
We would like to Thank Entenmann’s Baker Outlet for donating donuts; Re/Max Realty for donating hotdogs and a hotdog cart for the day; Lafarge for donating pulled pork, potato chips and soda; and Gotugo for donating a portable restroom for the event!
We would also like to thank the following groups who showed up in large number to help for the day: The Boy Scouts, The Girl Scout Brownies, the U.S. Navy, Dundalk High School, Saint Timothy’s School for Girls, Towson University Students, Johns Hopkins University Students and the Forestry Association! Thank you all for helping to make this cleanup an incredible success!
You can learn more about Clean Bread and Cheese Creek form our Website: www.BreadandCheeseCreek.org, on Facebook, Twitter, Instagram, Pinterest, Tumblr, Google+ and Flickr!
Remove unwanted aspects from a scanned picture from 18 years ago of my beloved daughter, .
Tutorial available on YouTube