View allAll Photos Tagged Refinement

Land Rover and renowned Magnum photographer Jonas Bendiksen have revealed the first in a series of unique works entitled ‘Ultimate Vistas’, extraordinary landscape photographs captured with help from the world’s ultimate SUV: the Range Rover.

+++ DISCLAIMER +++

Nothing you see here is real, even though the conversion or the presented background story might be based historical facts. BEWARE!

  

It took China long way to develop and produce a true supersonic fighter aircraft: in March, 1964, Shenyang Aircraft Factory began the first domestic production of the J-7 jet fighter. However, the mass production of the aircraft, which had been developed through Soviet help, license production and reverse-engineering, was severely hindered by an unexpected problem—the Cultural Revolution. This incident and its consequences resulted in poor initial quality and slow progress.

 

This, in turn, resulted in full scale production only coming about in the 1980s, by which time the J-7 design was showing its age. However, through the years the J-7 saw constant development and refinement in China.

 

One of the many directions of the prolific J-7 family was the J-7III series, later re-coded J-7C. This variant was in so far special, as it was not based on the 1st generation MiG-21F. It was rather a reverse-engineered MiG-21MF obtained from Egypt, but just like the Soviet ejection seat, the original Soviet radar failed to impress Chinese, so a domestic Chinese radar was developed for the aircraft called the "JL-7". JL-7 is a 2 cm wavelength mono pulse fire radar weighing 100 kg, with a maximum range of 28 km, and MTBF is 70 hours.

 

However, due to the limitation of Chinese avionics industry in the 1980s, the performance of the domestic Chinese fire control radars were not satisfactory, because due to their relatively large size, the nosecone had to be enlarged, resulting in decrease in aerodynamic performance of the series. As a result, only very limited numbers of this series were built.

 

The J-7III prototypes comprised a series of a total of 5 aircraft, equipped with domestically developed HTY-3 ejection seat and KL-11 auto pilot. These machines had to be powered by the domestic WP-7 engine (a copy of the MiG-21F's Tumansky R-11) because the intended WP-13F (a license build of the Tumansky R-13) failed to meet the original schedule. The J-7III was planned to enter service in 1985, but due to the delay of WP-13 development, it was not until 1987 when the design was finally certified.

 

Production of the true J-7C fighter started in 1989, when the WP-13 became available, but only a total of 17 were built until 1996. It was soon superseded by the J-7IIIA, the prototype of the more sophisticated J-7D. This upgraded all-weather fighter was equipped with KJ-11A auto pilot, JD-3II TACAN, ADS-1 air data computer, Type 563B INS, WL-7A radio compass, Type 256 radar altimeter, TKR-122 radio, 930-4 RWR, 941-4A decoy launcher, and an improved JL-7A radar.

The fighter was to be armed with PL-7 & PL-8 AAMs and carried a twin 23 mm gun (a copy of the MiG-21MF's ventral GSh-23-2 cannon). A HK-13A HUD replaced HK-03D optical sight in earlier models. The upgraded JL-7A fire control radar had look-down/shoot-down capability added.

 

The production J-7D received an uprated WP-13FI engine, and initial certification was received in November 1994, but it was not until more than a year later in December 1995 when the model was finally fully certified due to the need to certify the WP-13FI on the aircraft. But, again, the results were not satisfactory and only 32 were built until 1999.

 

Even though the J-7C and D had been developed from a much more modern basis than the earlier MiG-21F derivatives, the "new" type offered - except for the more capable radar and the all-weather capability - no considerable benefit, was even less manoueverable in dogfight situations, more complex and expensive, and also had a very limited range. What was needed was a revolutionary step forward.

 

Such a proposal came from Chengdu Aircraft Corporation's general designer Mr. Wang Zi-fang (王子方) in 1998, who had already worked on the J-7D. He proposed the addition of fuselage elements that would partly replace the inner wing sections and create lift, but also offer additional room for more and better avionics, allowing the carriage of state-of-the-art weaponry like the PL-11 AAM, together with more internal fuel. Furthermore, the adaptation of the WS-13 turbofan, a new engine for which project work had just started and which would improve both range and performance of the modified aircraft.

 

In 2000, while an alternative design, the J-7FS, had been under parallel development and cleared for service by then, CAC received green lights for a developmental technology demonstrator under the label J-7DS (S stands for Shi-yan, 试验, meaning "experimental" in Chinese).

 

While the general third generation MiG-21 outlines were retained, the blended wing/body sections - certainly inspired by US American types like the F-16 and the F-18 - and a new, taller fin changed overall proportions considerably. Esp. from above, the bigger wing planform with extended LERXes (reminiscent of the MiG Analog experimental delta wing aircraft that were used during the Tu-144 development in the Soviet union) created the impression of a much more massive and compact aircraft, even though the dimenions remained unchanged.

 

Thanks to the additional space in the BWB sections, new and better equipment could be installed, and the aerodynamics were changed, too. For instance, the J-7's air brakes under the forward fuselage were deleted and replaced by a new pair of splayed design, stabilizing the aircraft more effectively in a dive. The single air brake in front of the ventral fin was retained, though, as well as the blown flaps from the MiG-21MF.

 

The ventral gun pod with a domestic copy of the GSh-23-2 was also deleted; this space, together with the air brake compartment, was now used for a semi-recessed laser range finder, so that guided ammunition could be deployed. But a gun was retained: a new, more effective Type 30-I 30 mm (1.18 in) cannon (a copy of the Gryazev-Shipunov GSh-30-1) with 150 rounds was placed into the port LERX, under the cockpit.

Inside of the LERX on the other side, compartments for new avionics (esp. for the once more upgraded JL-7B fire control radar) were added. With this radar and weapons like the PL-11 missile, the aircraft finally achieved the long desired BVR interception capability.

 

Flanking the new, longer WS-13 engine, the BWBs held extra fuel tanks. For en even more extended range and loiter time, provisions were made for a fixed air-refuelling probe on the starboard side under the cockpit.

Under the inner wings, an additional pair of pylons was added (for a total of seven), and overall ordnance load could be raised to 3.000 kg (6.600 lb).

 

The first J-7DS first flew in summer 2005, still only powered by an WP-13I engine, for a 22-month test program. Three prototypes were built, but only the first two aircraft were to fly – the third machine was only used for static tests.

The driving force behind this program was actually the PLANAF, the People's Liberation Army, Naval Air Force (中國人民解放軍海軍航空兵). While the Chinese Air Force rather placed its bet on the more modern and sophisticated Chengdu J-10 fighter, the PLANAF was rather looking for a more simple and inexpensive multi-role combat aircraft that could carry out both air defence and strike missions, and replace the ageing (and rather ineffective) J-8 fighters and Q-5 attack aircraft, as well as early J-7II fighters with limited all-weather capability. Consequently, the type was only operated by the PLANAF from 2010 onwards and received the official designation J-7DH ("H" for 海军 [Haijun] = Navy).

 

Production was still continuing in small numbers in late 2016, but the number of built specimen is uncertain. About 150 J-7DH are supposed to be in active service, mostly with PLANAF Northern and East Fleet units. Unlike many former J-7 variants (including its ancestor, the PLAAF's more or less stillborn C and D variants), the J-7DH was not offered for export.

  

General characteristics:

Crew: 1

Length: 14.61 m (47 ft 10½ in)

15.69 m (51 ft 5 in) with pitot

Wingspan: 7,41 m (24 ft 3½ in)

Height: 4.78 m (15 ft 8½ in)

Wing area: 28.88 m² (309.8 ft²)

Aspect ratio: 2.8:1

Empty weight: 5,892 kg (12.977 lb)

Loaded weight: 8,240 kg (18.150 lb)

Max. take-off weight: 9,800 kg (21.585 lb)

 

Powerplant:

1× Guizhou WS-13 turbofan with a dry thrust of 51.2 kN (11,510 lbf)

and 84.6 kN (19,000 lbf) with afterburner

 

Performance

Maximum speed: Mach 2.0, 2,200 km/h (1.189 knots, 1.375 mph)

Stall speed: 210 km/h (114 knots, 131 mph) IAS

Combat radius: 1.050 km (568 nmi, 652 mi) (air superiority, two AAMs and three drop tanks)

Ferry range: 2,500 km (1.350 nmi, 1.550 mi)

Service ceiling: 17,500 m (57.420 ft)

Rate of climb: 195 m/s (38.386 ft/min)

 

Armament:

1× Type 30-I 30mm (1.18") cannon with 150 rounds in the port forward fuselage;

7× hardpoints (6× under-wing, 1× centerline under-fuselage) with a capacity of 3,000 kg maximum (up to 500 kg each); Ordnance primarily comprises air-to-air missiles, including PL-2, PL-5, PL-7, PL-8, PL-9 and PL-11 AAMs, but in a secondary CAS role various rocket pods an unguided bombs of up to 500kg caliber can be carried

  

The kit and its assembly:

Another Chinese whif, and again a MiG-21 derivative - a fruitful source of inspiration. The J-7DH is not based ona real world project, though, but was rather inspired by an article about a Chinese 2020 update for the MiG-21 from Japan, including some drawings and artwork.

The latter depicted a late MiG-21 with some minor mods, but also some characteristic F-16 parts like the chines and the BWB flanks grafted to it - and it looked good!

 

Since I recently butchered an Intech F-16 for my Academy T-50 conversion (primariliy donation the whole landing gear, including the wells), I had a donor kit at ahnd, and I also found a Mastercraft MiG-21MF in my stash without a true plan. So I combined both for "something Chinese"...

 

The build was pretty starightforward - except for the fact that the Intech F-16 is a rather clumsy affair (donating the fin and the fuselage flanks) and that no part from the Mastercraft MiG-21 matches with another one! Lots of improvisation and mods were necessary.

On the other side, the F-16 parts were just glued onto the MiG-21 fuselage and blended into one with putty (in several layers, though).

 

The fin was taken wholesale from the F-16, but clipped by about 5mm at the top. I originally wanted to use F-16 wings with wing tip launch rails and the stabilizers, too, but when I held them to the model it looked wacky - so I reverted to the Fishbed parts. The stabilizers were taken OOB, but the wing span was reduced at the roots, so that the original MiG-21 wing span was retained. Only the landing gear wells had to be adapted accordingly, but that was easier than expected and the result looks very organic.

 

With more wing area, I added a third pair of hardpoints under the wing roots, and I kept the gun under the cockpit in the LERX. That offered room inside of the fuselage, filled by a laser rangefinder in a canoe fairing where the original gun used to be.

 

On the tail, a new jet nozzle was mounted, on the fuselage some air scoops and antennae were added an an IR sensor on the nose. A new seat was used in the cockpit instead of the poor L-shaped OOB thing. The PL-2 & -11 ordnance consists of simple AIM-9Bs and slightly modified AIM-120, plus some launch rails from the scrap box.

  

Paintings and markings:

Modern Chinese military aircraft are hardly benchmarks for creative paint schemes - and the only "realistic" option in this case would have been a uniform grey livery. The original J-7C PLAAF night fighters carried a high contrast sand/dark green/light blue livery, similar to the MiG-21 export scheme (a.k.a. "Pumpkin"), but I found the latter not suitabel for a naval operator.

 

I eventually found a compromise, using one of the J-7C schemes as pattern but using grey tones instead - still not very colorful, but the "clover" patterns would help disrupt the aircraft's outlines and support the modern look and feel of this whif.

 

Basic colors are Humbrol 140 (Dark Gull Grey, FS 36231) and 165 (RAF Medium Sea Grey) from above, plus 122 (IAF Pale Blue, FS 35622) on the undersides. With the dark grey pattern placed with no direct connection to the Pale Blue undersides, there's even a blending effect between the tones - not spectacular, but IMHO effective.

 

The cockpit interior became pale teal (a mix of Soviet Cockpit Blue and white), while the landing gear wells were painted with a mix of Humbrol 56, 119 and 225 - for a yellow-ish, dull metallic brown. The wheel discs became bright green (Humbrol 131), and any di-electric panel and the radome became deep green (Humbrol 2).

 

The decals come from a Begemot MiG-21 sheet (roundels), while the tactical 5-digit code comes from an Airfix 1:72 B-17 sheet. The yellow code is a bit unusual, as well as its place on the fin, but both occur on Chinese fighters.

The code itself is based on the information published in the 2010 book “Chinese Air Power” by Yefim Gordon und Dmitriy Komissarov, where the Chinese code system is explained – I hope that it is more or less authentic.

 

The kit received a light black ink wash and some dry painting with lighter blue-grey shades, but no weathering, since modern Chinese aircraft tend to look pretty clean and pristine. Since the kits both did not feature much surface details, and a lot of the few OOB details got lost during the PSR process for the BWB wing sections, I painted some details and panel lines with a soft pencil - a compromise, though. Finally, the kit was sealed with matt acrylic varnish.

  

The result is a pretty subtle whif, and with the F-16 parts added the result even looks very conclusive! From above, the extra fuselage width makes the Fishbed look very massive, which is underlined by the extended stabilizer span. But I think that retailing the original MiG-21 delta wing was a good decision, because it helps retaining the Fishbed's "fast" look.

I am just not 100% happy with the finish - but for the crappy kits I used as basis it's O.K.

 

+++ DISCLAIMER +++

Nothing you see here is real, even though the conversion or the presented background story might be based historical facts. BEWARE!

  

It took China long way to develop and produce a true supersonic fighter aircraft: in March, 1964, Shenyang Aircraft Factory began the first domestic production of the J-7 jet fighter. However, the mass production of the aircraft, which had been developed through Soviet help, license production and reverse-engineering, was severely hindered by an unexpected problem—the Cultural Revolution. This incident and its consequences resulted in poor initial quality and slow progress.

 

This, in turn, resulted in full scale production only coming about in the 1980s, by which time the J-7 design was showing its age. However, through the years the J-7 saw constant development and refinement in China.

 

One of the many directions of the prolific J-7 family was the J-7III series, later re-coded J-7C. This variant was in so far special, as it was not based on the 1st generation MiG-21F. It was rather a reverse-engineered MiG-21MF obtained from Egypt, but just like the Soviet ejection seat, the original Soviet radar failed to impress Chinese, so a domestic Chinese radar was developed for the aircraft called the "JL-7". JL-7 is a 2 cm wavelength mono pulse fire radar weighing 100 kg, with a maximum range of 28 km, and MTBF is 70 hours.

 

However, due to the limitation of Chinese avionics industry in the 1980s, the performance of the domestic Chinese fire control radars were not satisfactory, because due to their relatively large size, the nosecone had to be enlarged, resulting in decrease in aerodynamic performance of the series. As a result, only very limited numbers of this series were built.

 

The J-7III prototypes comprised a series of a total of 5 aircraft, equipped with domestically developed HTY-3 ejection seat and KL-11 auto pilot. These machines had to be powered by the domestic WP-7 engine (a copy of the MiG-21F's Tumansky R-11) because the intended WP-13F (a license build of the Tumansky R-13) failed to meet the original schedule. The J-7III was planned to enter service in 1985, but due to the delay of WP-13 development, it was not until 1987 when the design was finally certified.

 

Production of the true J-7C fighter started in 1989, when the WP-13 became available, but only a total of 17 were built until 1996. It was soon superseded by the J-7IIIA, the prototype of the more sophisticated J-7D. This upgraded all-weather fighter was equipped with KJ-11A auto pilot, JD-3II TACAN, ADS-1 air data computer, Type 563B INS, WL-7A radio compass, Type 256 radar altimeter, TKR-122 radio, 930-4 RWR, 941-4A decoy launcher, and an improved JL-7A radar.

The fighter was to be armed with PL-7 & PL-8 AAMs and carried a twin 23 mm gun (a copy of the MiG-21MF's ventral GSh-23-2 cannon). A HK-13A HUD replaced HK-03D optical sight in earlier models. The upgraded JL-7A fire control radar had look-down/shoot-down capability added.

 

The production J-7D received an uprated WP-13FI engine, and initial certification was received in November 1994, but it was not until more than a year later in December 1995 when the model was finally fully certified due to the need to certify the WP-13FI on the aircraft. But, again, the results were not satisfactory and only 32 were built until 1999.

 

Even though the J-7C and D had been developed from a much more modern basis than the earlier MiG-21F derivatives, the "new" type offered - except for the more capable radar and the all-weather capability - no considerable benefit, was even less manoueverable in dogfight situations, more complex and expensive, and also had a very limited range. What was needed was a revolutionary step forward.

 

Such a proposal came from Chengdu Aircraft Corporation's general designer Mr. Wang Zi-fang (王子方) in 1998, who had already worked on the J-7D. He proposed the addition of fuselage elements that would partly replace the inner wing sections and create lift, but also offer additional room for more and better avionics, allowing the carriage of state-of-the-art weaponry like the PL-11 AAM, together with more internal fuel. Furthermore, the adaptation of the WS-13 turbofan, a new engine for which project work had just started and which would improve both range and performance of the modified aircraft.

 

In 2000, while an alternative design, the J-7FS, had been under parallel development and cleared for service by then, CAC received green lights for a developmental technology demonstrator under the label J-7DS (S stands for Shi-yan, 试验, meaning "experimental" in Chinese).

 

While the general third generation MiG-21 outlines were retained, the blended wing/body sections - certainly inspired by US American types like the F-16 and the F-18 - and a new, taller fin changed overall proportions considerably. Esp. from above, the bigger wing planform with extended LERXes (reminiscent of the MiG Analog experimental delta wing aircraft that were used during the Tu-144 development in the Soviet union) created the impression of a much more massive and compact aircraft, even though the dimenions remained unchanged.

 

Thanks to the additional space in the BWB sections, new and better equipment could be installed, and the aerodynamics were changed, too. For instance, the J-7's air brakes under the forward fuselage were deleted and replaced by a new pair of splayed design, stabilizing the aircraft more effectively in a dive. The single air brake in front of the ventral fin was retained, though, as well as the blown flaps from the MiG-21MF.

 

The ventral gun pod with a domestic copy of the GSh-23-2 was also deleted; this space, together with the air brake compartment, was now used for a semi-recessed laser range finder, so that guided ammunition could be deployed. But a gun was retained: a new, more effective Type 30-I 30 mm (1.18 in) cannon (a copy of the Gryazev-Shipunov GSh-30-1) with 150 rounds was placed into the port LERX, under the cockpit.

Inside of the LERX on the other side, compartments for new avionics (esp. for the once more upgraded JL-7B fire control radar) were added. With this radar and weapons like the PL-11 missile, the aircraft finally achieved the long desired BVR interception capability.

 

Flanking the new, longer WS-13 engine, the BWBs held extra fuel tanks. For en even more extended range and loiter time, provisions were made for a fixed air-refuelling probe on the starboard side under the cockpit.

Under the inner wings, an additional pair of pylons was added (for a total of seven), and overall ordnance load could be raised to 3.000 kg (6.600 lb).

 

The first J-7DS first flew in summer 2005, still only powered by an WP-13I engine, for a 22-month test program. Three prototypes were built, but only the first two aircraft were to fly – the third machine was only used for static tests.

The driving force behind this program was actually the PLANAF, the People's Liberation Army, Naval Air Force (中國人民解放軍海軍航空兵). While the Chinese Air Force rather placed its bet on the more modern and sophisticated Chengdu J-10 fighter, the PLANAF was rather looking for a more simple and inexpensive multi-role combat aircraft that could carry out both air defence and strike missions, and replace the ageing (and rather ineffective) J-8 fighters and Q-5 attack aircraft, as well as early J-7II fighters with limited all-weather capability. Consequently, the type was only operated by the PLANAF from 2010 onwards and received the official designation J-7DH ("H" for 海军 [Haijun] = Navy).

 

Production was still continuing in small numbers in late 2016, but the number of built specimen is uncertain. About 150 J-7DH are supposed to be in active service, mostly with PLANAF Northern and East Fleet units. Unlike many former J-7 variants (including its ancestor, the PLAAF's more or less stillborn C and D variants), the J-7DH was not offered for export.

  

General characteristics:

Crew: 1

Length: 14.61 m (47 ft 10½ in)

15.69 m (51 ft 5 in) with pitot

Wingspan: 7,41 m (24 ft 3½ in)

Height: 4.78 m (15 ft 8½ in)

Wing area: 28.88 m² (309.8 ft²)

Aspect ratio: 2.8:1

Empty weight: 5,892 kg (12.977 lb)

Loaded weight: 8,240 kg (18.150 lb)

Max. take-off weight: 9,800 kg (21.585 lb)

 

Powerplant:

1× Guizhou WS-13 turbofan with a dry thrust of 51.2 kN (11,510 lbf)

and 84.6 kN (19,000 lbf) with afterburner

 

Performance

Maximum speed: Mach 2.0, 2,200 km/h (1.189 knots, 1.375 mph)

Stall speed: 210 km/h (114 knots, 131 mph) IAS

Combat radius: 1.050 km (568 nmi, 652 mi) (air superiority, two AAMs and three drop tanks)

Ferry range: 2,500 km (1.350 nmi, 1.550 mi)

Service ceiling: 17,500 m (57.420 ft)

Rate of climb: 195 m/s (38.386 ft/min)

 

Armament:

1× Type 30-I 30mm (1.18") cannon with 150 rounds in the port forward fuselage;

7× hardpoints (6× under-wing, 1× centerline under-fuselage) with a capacity of 3,000 kg maximum (up to 500 kg each); Ordnance primarily comprises air-to-air missiles, including PL-2, PL-5, PL-7, PL-8, PL-9 and PL-11 AAMs, but in a secondary CAS role various rocket pods an unguided bombs of up to 500kg caliber can be carried

  

The kit and its assembly:

Another Chinese whif, and again a MiG-21 derivative - a fruitful source of inspiration. The J-7DH is not based ona real world project, though, but was rather inspired by an article about a Chinese 2020 update for the MiG-21 from Japan, including some drawings and artwork.

The latter depicted a late MiG-21 with some minor mods, but also some characteristic F-16 parts like the chines and the BWB flanks grafted to it - and it looked good!

 

Since I recently butchered an Intech F-16 for my Academy T-50 conversion (primariliy donation the whole landing gear, including the wells), I had a donor kit at ahnd, and I also found a Mastercraft MiG-21MF in my stash without a true plan. So I combined both for "something Chinese"...

 

The build was pretty starightforward - except for the fact that the Intech F-16 is a rather clumsy affair (donating the fin and the fuselage flanks) and that no part from the Mastercraft MiG-21 matches with another one! Lots of improvisation and mods were necessary.

On the other side, the F-16 parts were just glued onto the MiG-21 fuselage and blended into one with putty (in several layers, though).

 

The fin was taken wholesale from the F-16, but clipped by about 5mm at the top. I originally wanted to use F-16 wings with wing tip launch rails and the stabilizers, too, but when I held them to the model it looked wacky - so I reverted to the Fishbed parts. The stabilizers were taken OOB, but the wing span was reduced at the roots, so that the original MiG-21 wing span was retained. Only the landing gear wells had to be adapted accordingly, but that was easier than expected and the result looks very organic.

 

With more wing area, I added a third pair of hardpoints under the wing roots, and I kept the gun under the cockpit in the LERX. That offered room inside of the fuselage, filled by a laser rangefinder in a canoe fairing where the original gun used to be.

 

On the tail, a new jet nozzle was mounted, on the fuselage some air scoops and antennae were added an an IR sensor on the nose. A new seat was used in the cockpit instead of the poor L-shaped OOB thing. The PL-2 & -11 ordnance consists of simple AIM-9Bs and slightly modified AIM-120, plus some launch rails from the scrap box.

  

Paintings and markings:

Modern Chinese military aircraft are hardly benchmarks for creative paint schemes - and the only "realistic" option in this case would have been a uniform grey livery. The original J-7C PLAAF night fighters carried a high contrast sand/dark green/light blue livery, similar to the MiG-21 export scheme (a.k.a. "Pumpkin"), but I found the latter not suitabel for a naval operator.

 

I eventually found a compromise, using one of the J-7C schemes as pattern but using grey tones instead - still not very colorful, but the "clover" patterns would help disrupt the aircraft's outlines and support the modern look and feel of this whif.

 

Basic colors are Humbrol 140 (Dark Gull Grey, FS 36231) and 165 (RAF Medium Sea Grey) from above, plus 122 (IAF Pale Blue, FS 35622) on the undersides. With the dark grey pattern placed with no direct connection to the Pale Blue undersides, there's even a blending effect between the tones - not spectacular, but IMHO effective.

 

The cockpit interior became pale teal (a mix of Soviet Cockpit Blue and white), while the landing gear wells were painted with a mix of Humbrol 56, 119 and 225 - for a yellow-ish, dull metallic brown. The wheel discs became bright green (Humbrol 131), and any di-electric panel and the radome became deep green (Humbrol 2).

 

The decals come from a Begemot MiG-21 sheet (roundels), while the tactical 5-digit code comes from an Airfix 1:72 B-17 sheet. The yellow code is a bit unusual, as well as its place on the fin, but both occur on Chinese fighters.

The code itself is based on the information published in the 2010 book “Chinese Air Power” by Yefim Gordon und Dmitriy Komissarov, where the Chinese code system is explained – I hope that it is more or less authentic.

 

The kit received a light black ink wash and some dry painting with lighter blue-grey shades, but no weathering, since modern Chinese aircraft tend to look pretty clean and pristine. Since the kits both did not feature much surface details, and a lot of the few OOB details got lost during the PSR process for the BWB wing sections, I painted some details and panel lines with a soft pencil - a compromise, though. Finally, the kit was sealed with matt acrylic varnish.

  

The result is a pretty subtle whif, and with the F-16 parts added the result even looks very conclusive! From above, the extra fuselage width makes the Fishbed look very massive, which is underlined by the extended stabilizer span. But I think that retailing the original MiG-21 delta wing was a good decision, because it helps retaining the Fishbed's "fast" look.

I am just not 100% happy with the finish - but for the crappy kits I used as basis it's O.K.

 

Introduced in 1985, the Turbo R continued the modern 'Blower Bentley' theme that had commenced three years previously with the Mulsanne Turbo, but with the added refinement of suspension better suited to the car's increased performance. Outwardly, the R differed by virtue of its cast-alloy wheels shod with low-profile Pirelli tyres, while inside there was a revised fascia with tachometer included amongst the comprehensive instrumentation. In a break with tradition, power figures were made public, revealing that the engine produced a maximum of 320 bhp and a staggering 475 lb/ft of torque. Few cars were - or are - better suited to fast long-distance touring.

 

This particular Turbo R was delivered new to Achilli Motors SPA in Milan, Italy in March 1990. Circa 1992, the Bentley was exported to Japan, returning to the UK in 2007. It was serviced on arrival by Peter Jarvis at 67.000 km (December 2007) and again at 70.000 km (June 2015). Bentley Edinburgh serviced the car in June 2016 (at 70.801 km) since when it has only been driven some 4.000 kilometres. This collectible modern Bentley is offered with its service booklet, owner's handbook, sundry invoices for parts, UK V5C registration documents, and some expired MoT certificates.

 

Les Grandes Marques du Monde au Grand Palais

Bonhams

Sold for € 17.250

Estimated : € 20.000 - 30.000

 

Parijs - Paris

Frankrijk - France

February 2017

The Taj Mahal (/ˌtɑːdʒ məˈhɑːl/, more often /ˈtɑːʒ/; from Persian and Arabic, "crown of palaces", pronounced [ˈt̪aːdʒ mɛˈɦɛl]) is a white marble mausoleum located on the southern bank of Yamuna River in the Indian city of Agra. It was commissioned in 1632 by the Mughal emperor Shah Jahan (reigned 1628–1658) to house the tomb of his favorite wife of three, Mumtaz Mahal.

 

Construction of the mausoleum was essentially completed in 1643 but work continued on other phases of the project for an additional ten years. The Taj Mahal complex is believed to have been completed in its entirety in 1653 at a cost estimated at the time to be around 32 million Indian rupees, which in 2015 would be valued at around 52.8 billion Indian rupees ($827 million US). The construction project employed around 20,000 artisans under the guidance of a board of architects led by Ustad Ahmad Lahauri. The domed marble tomb is part of an integrated complex consisting of gardens and two red-sandstone buildings surrounded by a crenellated wall on three sides.

 

The Taj Mahal is regarded by many as the best example of Mughal architecture and is widely recognized as "the jewel of Muslim art in India". It is one of the world’s most celebrated structures and a symbol of India’s rich history. Designated a UNESCO World Heritage Site in 1983, the Taj Mahal attracts some 3 million visitors a year.

 

INSPIRATION

In 1631, Shah Jahan, emperor during the Mughal empire's period of greatest prosperity, was grief-stricken when his favorite of three wives and beloved companion, Mumtaz Mahal, a Persian princess, died during the birth of their 14th child, Gauhara Begum. Construction of the Taj Mahal began in 1632. The court chronicles of Shah Jahan's grief illustrate the love story traditionally held as an inspiration for Taj Mahal. The principal mausoleum was completed in 1643 and the surrounding buildings and garden were finished about five years later.

 

ARCHITECTURE AND DESIGN

The Taj Mahal incorporates and expands on design traditions of Persian and earlier Mughal architecture. Specific inspiration came from successful Timurid and Mughal buildings including; the Gur-e Amir (the tomb of Timur, progenitor of the Mughal dynasty, in Samarkand), Humayun's Tomb, Itmad-Ud-Daulah's Tomb (sometimes called the Baby Taj), and Shah Jahan's own Jama Masjid in Delhi. While earlier Mughal buildings were primarily constructed of red sandstone, Shah Jahan promoted the use of white marble inlaid with semi-precious stones. Buildings under his patronage reached new levels of refinement.

 

TOMB

The tomb is the central focus of the entire complex of the Taj Mahal. It is a large, white marble structure standing on a square plinth and consists of a symmetrical building with an iwan (an arch-shaped doorway) topped by a large dome and finial. Like most Mughal tombs, the basic elements are Persian in origin.

 

The base structure is a large multi-chambered cube with chamfered corners forming an unequal eight-sided structure that is approximately 55 metres on each of the four long sides. Each side of the iwan is framed with a huge pishtaq or vaulted archway with two similarly shaped arched balconies stacked on either side. This motif of stacked pishtaqs is replicated on the chamfered corner areas, making the design completely symmetrical on all sides of the building. Four minarets frame the tomb, one at each corner of the plinth facing the chamfered corners. The main chamber houses the false sarcophagi of Mumtaz Mahal and Shah Jahan; the actual graves are at a lower level.

 

The most spectacular feature is the marble dome that surmounts the tomb. The dome is nearly 35 metres high which is close in measurement to the length of the base, and accentuated by the cylindrical "drum" it sits on which is approximately 7 metres high. Because of its shape, the dome is often called an onion dome or amrud (guava dome). The top is decorated with a lotus design which also serves to accentuate its height. The shape of the dome is emphasized by four smaller domed chattris (kiosks) placed at its corners, which replicate the onion shape of the main dome. Their columned bases open through the roof of the tomb and provide light to the interior. Tall decorative spires (guldastas) extend from edges of base walls, and provide visual emphasis to the height of the dome. The lotus motif is repeated on both the chattris and guldastas. The dome and chattris are topped by a gilded finial which mixes traditional Persian and Hindustani decorative elements.

 

The main finial was originally made of gold but was replaced by a copy made of gilded bronze in the early 19th century. This feature provides a clear example of integration of traditional Persian and Hindu decorative elements. The finial is topped by a moon, a typical Islamic motif whose horns point heavenward.

 

The minarets, which are each more than 40 metres tall, display the designer's penchant for symmetry. They were designed as working minarets - a traditional element of mosques, used by the muezzin to call the Islamic faithful to prayer. Each minaret is effectively divided into three equal parts by two working balconies that ring the tower. At the top of the tower is a final balcony surmounted by a chattri that mirrors the design of those on the tomb. The chattris all share the same decorative elements of a lotus design topped by a gilded finial. The minarets were constructed slightly outside of the plinth so that in the event of collapse, a typical occurrence with many tall constructions of the period, the material from the towers would tend to fall away from the tomb.

 

EXTERIOR DECORATIONS

The exterior decorations of the Taj Mahal are among the finest in Mughal architecture. As the surface area changes, the decorations are refined proportionally. The decorative elements were created by applying paint, stucco, stone inlays or carvings. In line with the Islamic prohibition against the use of anthropomorphic forms, the decorative elements can be grouped into either calligraphy, abstract forms or vegetative motifs. Throughout the complex are passages from the Qur'an that comprise some of the decorative elements. Recent scholarship suggests that the passages were chosen by Amanat Khan.

 

The calligraphy on the Great Gate reads "O Soul, thou art at rest. Return to the Lord at peace with Him, and He at peace with you." The calligraphy was created in 1609 by a calligrapher named Abdul Haq. Shah Jahan conferred the title of "Amanat Khan" upon him as a reward for his "dazzling virtuosity". Near the lines from the Qur'an at the base of the interior dome is the inscription, "Written by the insignificant being, Amanat Khan Shirazi." Much of the calligraphy is composed of florid thuluth script made of jasper or black marble inlaid in white marble panels. Higher panels are written in slightly larger script to reduce the skewing effect when viewed from below. The calligraphy found on the marble cenotaphs in the tomb is particularly detailed and delicate.

 

Abstract forms are used throughout, especially in the plinth, minarets, gateway, mosque, jawab and, to a lesser extent, on the surfaces of the tomb. The domes and vaults of the sandstone buildings are worked with tracery of incised painting to create elaborate geometric forms. Herringbone inlays define the space between many of the adjoining elements. White inlays are used in sandstone buildings, and dark or black inlays on the white marbles. Mortared areas of the marble buildings have been stained or painted in a contrasting color which creates a complex array of geometric patterns. Floors and walkways use contrasting tiles or blocks in tessellation patterns.

 

On the lower walls of the tomb are white marble dados sculpted with realistic bas relief depictions of flowers and vines. The marble has been polished to emphasise the exquisite detailing of the carvings. The dado frames and archway spandrels have been decorated with pietra dura inlays of highly stylised, almost geometric vines, flowers and fruits. The inlay stones are of yellow marble, jasper and jade, polished and levelled to the surface of the walls.

 

INTERIOR DECORATION

The interior chamber of the Taj Mahal reaches far beyond traditional decorative elements. The inlay work is not pietra dura, but a lapidary of precious and semiprecious gemstones. The inner chamber is an octagon with the design allowing for entry from each face, although only the door facing the garden to the south is used. The interior walls are about 25 metres high and are topped by a "false" interior dome decorated with a sun motif. Eight pishtaq arches define the space at ground level and, as with the exterior, each lower pishtaq is crowned by a second pishtaq about midway up the wall. The four central upper arches form balconies or viewing areas, and each balcony's exterior window has an intricate screen or jali cut from marble. In addition to the light from the balcony screens, light enters through roof openings covered by chattris at the corners. The octagonal marble screen or jali bordering the cenotaphs is made from eight marble panels carved through with intricate pierce work. The remaining surfaces are inlaid in delicate detail with semi-precious stones forming twining vines, fruits and flowers. Each chamber wall is highly decorated with dado bas-relief, intricate lapidary inlay and refined calligraphy panels which reflect, in miniature detail, the design elements seen throughout the exterior of the complex.

 

Muslim tradition forbids elaborate decoration of graves. Hence, the bodies of Mumtaz and Shah Jahan were put in a relatively plain crypt beneath the inner chamber with their faces turned right, towards Mecca. Mumtaz Mahal's cenotaph is placed at the precise centre of the inner chamber on a rectangular marble base of 1.5 by 2.5 metres. Both the base and casket are elaborately inlaid with precious and semiprecious gems. Calligraphic inscriptions on the casket identify and praise Mumtaz. On the lid of the casket is a raised rectangular lozenge meant to suggest a writing tablet. Shah Jahan's cenotaph is beside Mumtaz's to the western side, and is the only visible asymmetric element in the entire complex. His cenotaph is bigger than his wife's, but reflects the same elements: a larger casket on a slightly taller base precisely decorated with lapidary and calligraphy that identifies him. On the lid of the casket is a traditional sculpture of a small pen box.

 

The pen box and writing tablet are traditional Mughal funerary icons decorating the caskets of men and women respectively. The Ninety Nine Names of God are calligraphic inscriptions on the sides of the actual tomb of Mumtaz Mahal. Other inscriptions inside the crypt include, "O Noble, O Magnificent, O Majestic, O Unique, O Eternal, O Glorious... ". The tomb of Shah Jahan bears a calligraphic inscription that reads; "He travelled from this world to the banquet-hall of Eternity on the night of the twenty-sixth of the month of Rajab, in the year 1076 Hijri."

 

GARDEN

The complex is set around a large 300-metre square charbagh or Mughal garden. The garden uses raised pathways that divide each of the four quarters of the garden into 16 sunken parterres or flowerbeds. Halfway between the tomb and gateway in the center of the garden is a raised marble water tank with a reflecting pool positioned on a north-south axis to reflect the image of the mausoleum. The raised marble water tank is called al Hawd al-Kawthar in reference to the "Tank of Abundance" promised to Muhammad.

 

Elsewhere, the garden is laid out with avenues of trees and fountains. The charbagh garden, a design inspired by Persian gardens, was introduced to India by Babur, the first Mughal emperor. It symbolises the four flowing rivers of Jannah (Paradise) and reflects the Paradise garden derived from the Persian paridaeza, meaning 'walled garden'. In mystic Islamic texts of the Mughal period, Paradise is described as an ideal garden of abundance with four rivers flowing from a central spring or mountain, separating the garden into north, west, south and east.

 

Most Mughal charbaghs are rectangular with a tomb or pavilion in the center. The Taj Mahal garden is unusual in that the main element, the tomb, is located at the end of the garden. With the discovery of Mahtab Bagh or "Moonlight Garden" on the other side of the Yamuna, the interpretation of the Archaeological Survey of India is that the Yamuna river itself was incorporated into the garden's design and was meant to be seen as one of the rivers of Paradise. Similarities in layout and architectural features with the Shalimar Gardens suggests both gardens may have been designed by the same architect, Ali Mardan. Early accounts of the garden describe its profusion of vegetation, including abundant roses, daffodils, and fruit trees. As the Mughal Empire declined, the Taj Mahal and its gardens also declined. By the end of the 19th century, the British Empire controlled more than three-fifths of India, and assumed management of the Taj Mahal. They changed the landscaping to their liking which more closely resembled the formal lawns of London.

 

OUTLYING BUILDINGS

The Taj Mahal complex is bordered on three sides by crenellated red sandstone walls; the side facing the river is open. Outside the walls are several additional mausoleums, including those of Shah Jahan's other wives, and a larger tomb for Mumtaz's favourite servant.

 

The main gateway (darwaza) is a monumental structure built primarily of marble, and reminiscent of the Mughal architecture of earlier emperors. Its archways mirror the shape of the tomb's archways, and its pishtaq arches incorporate the calligraphy that decorates the tomb. The vaulted ceilings and walls have elaborate geometric designs like those found in the other sandstone buildings in the complex.

 

At the far end of the complex are two grand red sandstone buildings that mirror each other, and face the sides of the tomb. The backs of the buildings parallel the western and eastern walls. The western building is a mosque and the other is the jawab (answer), thought to have been constructed for architectural balance although it may have been used as a guesthouse. Distinctions between the two buildings include the jawab's lack of a mihrab (a niche in a mosque's wall facing Mecca), and its floors of geometric design whereas the floor of the mosque is laid with outlines of 569 prayer rugs in black marble. The mosque's basic design of a long hall surmounted by three domes is similar to others built by Shah Jahan, particularly the Masjid-i Jahān-Numā, or Jama Masjid, Delhi. The Mughal mosques of this period divide the sanctuary hall into three areas comprising a main sanctuary and slightly smaller sanctuaries on either side. At the Taj Mahal, each sanctuary opens onto an expansive vaulting dome. The outlying buildings were completed in 1643.

 

CONSTRUCTION

The Taj Mahal is built on a parcel of land to the south of the walled city of Agra. Shah Jahan presented Maharajah Jai Singh with a large palace in the center of Agra in exchange for the land. An area of roughly three acres was excavated, filled with dirt to reduce seepage, and leveled at 50 metres above riverbank. In the tomb area, wells were dug and filled with stone and rubble to form the footings of the tomb. Instead of lashed bamboo, workmen constructed a colossal brick scaffold that mirrored the tomb. The scaffold was so enormous that foremen estimated it would take years to dismantle.

 

The Taj Mahal was constructed using materials from all over India and Asia. It is believed over 1,000 elephants were used to transport building materials. The translucent white marble was brought from Makrana, Rajasthan, the jasper from Punjab, jade and crystal from China. The turquoise was from Tibet and the Lapis lazuli from Afghanistan, while the sapphire came from Sri Lanka and the carnelian from Arabia. In all, twenty eight types of precious and semi-precious stones were inlaid into the white marble.

 

According to the legend, Shah Jahan decreed that anyone could keep the bricks taken from the scaffold, and thus it was dismantled by peasants overnight. A fifteen kilometer tamped-earth ramp was built to transport marble and materials to the construction site and teams of twenty or thirty oxen pulled the blocks on specially constructed wagons. An elaborate post-and-beam pulley system was used to raise the blocks into desired position. Water was drawn from the river by a series of purs, an animal-powered rope and bucket mechanism, into a large storage tank and raised to a large distribution tank. It was passed into three subsidiary tanks, from which it was piped to the complex.

 

The plinth and tomb took roughly 12 years to complete. The remaining parts of the complex took an additional 10 years and were completed in order of minarets, mosque and jawab, and gateway. Since the complex was built in stages, discrepancies exist in completion dates due to differing opinions on "completion". Construction of the mausoleum itself was essentially completed by 1643 while work continued on the outlying buildings. Estimates of the cost of construction vary due to difficulties in estimating costs across time. The total cost has been estimated to be about 32 million Indian rupees, which is around 52.8 billion Indian rupees ($827 million US) based on 2015 values.

 

LATER DAYS

Abdul Hamid Lahauri in his book Badshahnama refers to Taj Mahal as rauza-i munawwara, meaning the illumined or illustrious tomb. Soon after the Taj Mahal's completion, Shah Jahan was deposed by his son Aurangzeb and put under house arrest at nearby Agra Fort. Upon Shah Jahan's death, Aurangzeb buried him in the mausoleum next to his wife. In the 18th century, the Jat rulers of Bharatpur invaded Agra and attacked the Taj Mahal, the two chandeliers, one of agate and another of silver, which were hung over the main cenotaph, were taken away by them, along with the gold and silver screen. Kanbo, a Mughal historian, said the gold shield which covered the 15-foot high finial at the top of the main dome was also removed during the Jat despoliation.

 

By the late 19th century, parts of the buildings had fallen into disrepair. During the time of the Indian rebellion of 1857, the Taj Mahal was defaced by British soldiers and government officials, who chiselled out precious stones and lapis lazuli from its walls. At the end of the 19th century, British viceroy Lord Curzon ordered a sweeping restoration project, which was completed in 1908. He also commissioned the large lamp in the interior chamber, modelled after one in a Cairo mosque. During this time the garden was remodelled with British-style lawns that are still in place today.

 

THREATS

In 1942, the government erected a scaffolding to disguise the building in anticipation of air attacks by the Japanese Air Force. During the India-Pakistan wars of 1965 and 1971, scaffoldings were again erected to mislead bomber pilots.

 

More recent threats have come from environmental pollution on the banks of Yamuna River including acid rain due to the Mathura Oil Refinery, which was opposed by Supreme Court of India directives. The pollution has been turning the Taj Mahal yellow. To help control the pollution, the Indian government has set up the Taj Trapezium Zone (TTZ), a 10,400-square-kilometre area around the monument where strict emissions standards are in place.

 

Concerns for the tomb's structural integrity have recently been raised because of a decline in the groundwater level in the Yamuna river basin which is falling at a rate of around 5 feet a year. In 2010, cracks appeared in parts of the tomb, and the minarets which surround the monument were showing signs of tilting, as the wooden foundation of the tomb may be rotting due to lack of water. In 2011 it was reported that some predictions indicated that the tomb could collapse within 5 years.

 

TOURISM

The Taj Mahal attracts a large number of tourists. UNESCO documented more than 2 million visitors in 2001, which increased to about 3 million in 2015. A two tier pricing system is in place, with a significantly lower entrance fee for Indian citizens and a more expensive one for foreigners. Most tourists visit in the cooler months of October, November and February. Polluting traffic is not allowed near the complex and tourists must either walk from parking lots or catch an electric bus. The Khawasspuras (northern courtyards) are currently being restored for use as a new visitor center.

 

The small town to the south of the Taj, known as Taj Ganji or Mumtazabad, was originally constructed with caravanserais, bazaars and markets to serve the needs of visitors and workmen. Lists of recommended travel destinations often feature the Taj Mahal, which also appears in several listings of seven wonders of the modern world, including the recently announced New Seven Wonders of the World, a recent poll with 100 million votes.

 

The grounds are open from 06:00 to 19:00 weekdays, except for Friday when the complex is open for prayers at the mosque between 12:00 and 14:00. The complex is open for night viewing on the day of the full moon and two days before and after, excluding Fridays and the month of Ramadan. For security reasons only five items - water in transparent bottles, small video cameras, still cameras, mobile phones and small ladies' purses - are allowed inside the Taj Mahal.

 

MYTHS

Ever since its construction, the building has been the source of an admiration transcending culture and geography, and so personal and emotional responses have consistently eclipsed scholastic appraisals of the monument. A longstanding myth holds that Shah Jahan planned a mausoleum to be built in black marble as a Black Taj Mahal across the Yamuna river. The idea originates from fanciful writings of Jean-Baptiste Tavernier, a European traveller who visited Agra in 1665. It was suggested that Shah Jahan was overthrown by his son Aurangzeb before it could be built. Ruins of blackened marble across the river in Moonlight Garden, Mahtab Bagh, seemed to support this legend. However, excavations carried out in the 1990s found that they were discolored white stones that had turned black. A more credible theory for the origins of the black mausoleum was demonstrated in 2006 by archaeologists who reconstructed part of the pool in the Moonlight Garden. A dark reflection of the white mausoleum could clearly be seen, befitting Shah Jahan's obsession with symmetry and the positioning of the pool itself.

 

No evidence exists for claims that describe, often in horrific detail, the deaths, dismemberments and mutilations which Shah Jahan supposedly inflicted on various architects and craftsmen associated with the tomb. Some stories claim that those involved in construction signed contracts committing themselves to have no part in any similar design. Similar claims are made for many famous buildings. No evidence exists for claims that Lord William Bentinck, governor-general of India in the 1830s, supposedly planned to demolish the Taj Mahal and auction off the marble. Bentinck's biographer John Rosselli says that the story arose from Bentinck's fund-raising sale of discarded marble from Agra Fort.

 

Another myth suggests that beating the silhouette of the finial will cause water to come forth. To this day, officials find broken bangles surrounding the silhouette.

 

In 2000, India's Supreme Court dismissed P. N. Oak's petition to declare that a Hindu king built the Taj Mahal. In 2005 a similar petition was dismissed by the Allahabad High Court. This case was brought by Amar Nath Mishra, a social worker and preacher who says that the Taj Mahal was built by the Hindu King Parmar Dev in 1196.

 

WIKIPEDIA

AVC AI face refinement from video screen shot

Eastbourne Pier is a firm favourite on the south coast of England and has an air of refinement and charm about it that is almost unique in terms of the piers that are still remaining today.

 

Although it has undergone significant refurbishment over the years, this has always been very tastefully done and the end result is a construction that somehow is rather quintessentially English, in a somewhat understated way, less ostentatious perhaps.

 

Eastbourne pier was officially opened in 1870, but construction work was not completed until 1872. It was fairly rigorously constructed and has not been so adversely affected by storms or floods, as some of its counterparts. The only significant damage it has suffered was in 1877, when part of the pier at shore side was literally washed away, but since then there has been relatively little incidence of damage.

 

When it first opened, the pier was simply a promenade facility with little in the way of facilities. A total of 6 little kiosks were provided, but in effect that was about it. It was (and indeed still is) a good length at about 303 metres (1,000 ft). So it makes a nice walk and the Victorians and Edwardians soon took Eastbourne to their hearts, as they took their promenades on the pier.

  

As Eastbourne Pier became more popular, more services and facilities were provided, including a rather opulent pavilion, with a 400 seat capacity, but this was to be short-lived, since it was only constructed in 1888 but was then replaced with a much grander 1000 seat theatre as well as a bar and office accommodation. Two ‘saloon’ type facilities were introduced halfway down the pier as well, so there was plenty to do.

 

1912 saw a new entrance being created, which was truly Edwardian and perhaps a little more minimalist than certain Victorian ‘follies’ had been. This air of Edwardian simplicity is still very much retained in Eastbourne Pier today, even though the Edwardian entrance gates were replaced in the 1950’s. They are not, however, vulgar or ugly, but have been designed in accordance with Edwardian charm. So in some ways the fact that part of it was built in Victorian times and part in Edwardian times, makes it an almost unique blend of the best from these two eras, with the Edwardian entrance perhaps influencing it more than the Victorian internal, which has been substantially changed over the years.

 

Eastbourne PierOne of the classic features of Eastbourne Pier is the camera obscura, which was actually introduced as part of the 1888 refurbishment and is a wonderful attraction, having been very lovingly restored in 2003. This has a simply amazing 360° projection. Truly stunning and it is quite amazing to think that it is so old.

 

Eastbourne Pier also boasts a nightclub, which used to be the former theatre, but which is quite unique as piers go. Despite the fact that Eastbourne is viewed as being a retirement option, there is not just the nightclub on the pier, but also other things happening at night, such as the Bar Copa, which unlike the nightclub is free. Bar Copa is open every night till late, but the Atlantis nightclub is only open from Wednesday through to Saturday, but you can dance the night away until 2 am, all year round.

 

For those who are too young… or even too old to go clubbing there is still a lot to do. There are two games arcades, where you can play very space age games or just stick with the old traditional and well loved games, such as the good old slot machines.

 

Eastbourne also has a little bit of an edge on some of her contemporaries, through having a glass blower, where you can see the most intricate of ornaments being blown, literally before your eyes. The shops are also very good and are just that little bit different.

 

There are plenty of options for eating, from cheap and cheerful chips to a family type restaurant or deliciously traditional pub food. So you won’t be stuck for somewhere to eat, with all budgets and tastes catered for. From café stalls to nice dining, the choice is excellent.

 

The fact that Eastbourne is a relatively genteel resort, as English seaside resorts go, is reflected in the fact that it does not have the fairground rides that are so prevalent on other piers. So at Eastbourne, you will not be scared to death on some death defying ride. No, you can gently amble down the pier, taking a pause to look through the camera obscura whilst you are going down, pop into one of the little shops or just clean out your system with some good old fashioned fresh air as you stride (or stroll, depending on your preferences) down the pier.

 

Eastbourne PierFamilies and disabled people will find everything on one level. The amusement arcades are the main attractions for children, or the camera obscura, but there is no dedicated children’s play area.

 

At night, Eastbourne pier is lit up which shows off its proud entrance and beautiful shape perfectly. It is a wonderful spectacle and it lends Eastbourne Pier an air of elegance that is very apt and fitting. It shows her at her very best.

 

Eastbourne Pier is not as loud and cheap or cheerful as many of her sisters. She seems more refined and just slightly more cultured. Despite this it is a lovely pier for anyone to visit, regardless of age. Although if a seaside pier is simply about rides and the fairground then Eastbourne will probably not be your desired choice. But if you enjoy the sea air, a family environment, losing a few £’s in the amusement arcade and having some great views of the sea and indeed the waterfront at Eastbourne, then you will probably fall in love with Eastbourne Pier. She is somehow just a little bit classier than some of her sisters and in some ways Eastbourne Pier almost seems to know this!

+++ DISCLAIMER +++

Nothing you see here is real, even though the conversion or the presented background story might be based on historical facts. BEWARE!

  

Some background:

As the Egyptian border was threatened by an Italian and German invasion during the Second World War, the Royal Air Force established more airfields in Egypt. The Royal Egyptian Air Force was sometimes treated as a part of the Royal Air Force, at other times a strict policy of neutrality was followed as Egypt maintained its official neutrality until very late in the war. As a result, few additional aircraft were supplied by Britain, however the arm did receive its first modern fighters, Hawker Hurricanes and a small number of Curtiss P-40 Tomahawks. In the immediate post-war period, cheap war surplus aircraft, including a large number of Supermarine Spitfire Mk.IXs were acquired.

 

Following the British withdrawal from the British Protectorate of Palestine and the establishment of the State of Israel on 14 May 1948, Egyptian forces crossed into Palestine as part of a wider Arab League military coalition in support of the Palestinians against the Israelis. During 1948–1949, Egypt received 62 refurbished Macchi C.205V Veltro (Italian: Greyhound) fighters. The C.205 was an Italian World War II fighter aircraft built by the Aeronautica Macchi. Along with the Reggiane Re.2005 and Fiat G.55, the Macchi C.205 was one of the three "Serie 5" Italian fighters built around the powerful German Daimler-Benz DB 605 engine.

The C.205 Veltro was a refinement of the earlier C.202 Folgore. With a top speed of some 640 km/h (400 mph) and equipped with a pair of 20 mm cannon as well as two 12.7 mm Breda machine guns, the Macchi C.205 had been highly respected by Allied and Axis pilots alike. Widely regarded as one of the best Italian aircraft of World War II, it proved to be extremely effective, destroying a large number of Allied bombers, and it proved capable of meeting fighters such as the North American P-51D Mustang on equal terms.

 

For the Egyptian order, eight C.205 and 16 C.202 were upgraded to C.205 standard in May 1948. In February 1949, three brand new and 15 ex-C.202, and in May another ten C.205 and C.202 each were brought to the Egyptian C.205 standard. This last contract was not finalized, though: Israeli secret services reacted with a bombing in Italy, which at the time was supplying both Israel and the Arab states, which, among others, destroyed Macchi facilities and damaged Egyptian C.205s still on order.

 

Only 15 completed Macchis were delivered to Egypt before the end of the 1948 Arab-Israeli War, seeing brief combat against the Israeli Air Force. The new Veltros were fully equipped, while the Folgore conversions were armed with only two 12.7 mm Breda machine guns. They were the lightest series of the entire production, and consequently had the best performance, but were seriously under-armed. Some Veltros, equipped with underwing bomb racks were used in ground-attack sorties against Israeli targets.

 

This left the Egyptian air force with a lack of capable fighters, so that Egypt ordered nineteen additional Fiat G.55 fighters from Italian surplus stocks and searched for ways to remedy the situation, since the relations with Great Britain had severely suffered under the Arab-Israeli War. This led to the plan to build and develop aircraft independently and just based on national resources, and eventually to the Helwan HA-100, Egypt’s first indigenous combat aircraft – even though it was rather a thorough upgrade program than a complete new construction.

 

Opened in late 1950 to manufacture airplanes, the Helwan Aircraft Factory, located in the South of Cairo, took on the challenge to create a domestic, improved fighter from existing C.205 and C.202 airframes in Egyptian service and its Fiat engines still available from Italy. The resulting Helwan HA-100 retained most of the forward fuselage structure of the C.205 with the original engine mounts, as well as the wings, but measures were taken to improve aerodynamics and combat value. One of these was the introduction of a new (yet framed) bubble canopy, which afforded the pilot with a much better all-round field of view and also improved the forward view while taxiing. This modification necessitated a lowered spine section, and wind tunnel tests suggested a deteriorated longitudinal stability, so that the tail section was completely redesigned. The fin was considerably enlarged and now had a square outline, while the stabilizers were raised into an almost cruciform tail configuration and also enlarged to improve the aircraft’s responsiveness to directional changes. The wings were clipped to improve handling and roll characteristics at low to medium altitudes, where most dogfights in the Arab-Israeli War had taken place.

The HA-100 retained the license-built Daimler Bent DB 605 from Italy, but to adapt this Fiat Tifone engine to the typical desert climate in Egypt with higher ambient temperatures and constant sand dust in the air, the HA-100 received an indigenous dust filter, a more effective (and larger) ventral radiator and a bigger, single oil cooler that replaced the C.205’s small drum coolers under the engine, which were very vulnerable, esp. to ground fire from light caliber weapons. To gain space in the fuselage under the cockpit for new fuel tank, both radiator and oil cooler were re-located to positions under the inner wings, similar in layout to early Supermarine Spitfire Marks.

 

While the HA-100 left the drawing boards and an initial converted C.205 went through trials, relations with Britain had been restored and the official state of war with Israel ensured that arms purchases continued. This gave the REAF an unexpected technological push forward: In late 1949, Egypt already received its first jet fighter, the British Gloster Meteor F4, and shortly after some de Havilland Vampire FB5s, which rendered the HA-100 obsolete. Nevertheless, the project was kept alive to strengthen Egypt’s nascent aircraft industry, but the type was only met with lukewarm enthusiasm.

The first HA-100 re-builds were delivered to 2 Sqn Royal Egyptian Air Force at Edku (East of Alexandria) in mid-1951, painted in a camouflage scheme of Dark Earth and Middle Stone with Azure Blue undersides, using leftover RAF material from WWII. Later, REAF 1 Sqn at Almaza near Cairo received HA-100s, too. Eventually, around forty HA-100s were built for the REAF until 1952. The only export customer for the HA-100 was Syria: sixteen machines, rejected by the REAF, were delivered in early 1952, where they served alongside former RAF Spitfire F.Mk.22s.

 

The REAF HA-100s only had a short career, but they eventually faced frontline duties and fired in anger. This also marked their last deployments, which occurred during the early stages of the Suez Crisis in 1956.

Only about 15 HA-100s of REAF No. 2 Squadron were still in flying condition due to quickly worsening engine spares shortages, and the aircraft had, in the meantime, been hardwired to carry up to four “Sakr” unguided 122mm rockets on the underwing hardpoints. Due to their agility at low altitude, the HA-100s were primarily used for ground attacks and low-level reconnaissance duties. On their missions the aircraft still performed well, but at that time, all Egyptian aircraft had been stripped off of their camouflage and were operated in a bare metal finish – a poor decision, since the glinting airframes were highly visible both in the air and on the ground. Consequently, the vintage propeller aircraft became easy targets, resulting high losses, and the HA-100s were grounded. They were officially retired by April 1957, after the end of the Suez conflict, and scrapped.

  

General characteristics:

Crew: 1

Length: 9,10 m (29 ft 10 in)

Wingspan: 10.01 m (32 ft 9½ in)

Height: 3.52 m (11 ft 6¼ in)

Wing area: 16.8 m² (181 sq ft)

Airfoil: root: NACA 23018 (modified); tip: NACA 23009 (modified)

Empty weight: 2.695 kg (5,936 lb)

Gross weight: 3.621 kg (7,975 lb)

Max takeoff weight: 4.100 kg (9,030 lb)

 

Powerplant:

1× Fiat RA.1050 R.C.58 Tifone (license-built Daimler Bent DB 605) V-12 inverted liquid-cooled piston

engine with 1,100 kW (1,500 hp), driving a 3-bladed constant-speed propeller#

 

Performance:

Maximum speed: 642 km/h (399 mph, 347 kn) at 7,200 m (23,600 ft)

Cruise speed: 400 km/h (250 mph, 220 kn)

Range: 950 km (590 mi, 510 nmi)

Service ceiling: 11,500 m (37,700 ft)

Time to altitude: 3,000 m (9,800 ft) in 2 minutes 40 seconds

Wing loading: 202.9 kg/m2 (41.6 lb/sq ft)

 

Armament.

2× 12.7 mm (.5 in) Breda-SAFAT machine guns, 400 RPG, in the nose

2× 20 mm MG 151 cannon, 250 RPG, in the outer wings

2× underwing hardpoints for 160 kg (350 lb) each for bombs or four 122mm Sakr unguided rockets

  

The kit and its assembly:

This oddity was spawned from curiosity – when read about the lightweight Helwan HA-300 fighter from the early Sixties, I wondered when and how the Egyptian aircraft industry had started? I was even more curious because I had already attributed a what-if model, the purely fictional (and later) HA-410 fighter bomber, to Egyptian engineering. So, I researched Helwan’s origins, checked the time frame of its establishment and eventually came across the REAF’s post-WWII C.205 Veltros. What if there had been an indigenous update program…?

 

Consequently, this conversion’s basis is a C.205V kit from Delta 2. This kit is based upon a unique mold, quite similar to the later Italeri kit, but it is different and has some curious solutions. For instance, the landing gear struts are mounted into the wings with L-shaped attachment pegs – as if the landing gear is supposed to be retractable. Odd, but very stable. Another weird solution: the wing gun barrels are attached to the wings together with massive plastic wedges that fit into respective openings. Another quite rigid construction, even though it calls for trimming and PSR. Beyond these quirks, the kit is quite nice. It comes with a convincing mix of recessed panel lines and raised rivet heads. Some parts are a bit soft in shape, though, e. g. the cowling fairings, but overall I am positively surprised.

 

To change the aircraft’s look I did some conversions, though. The most obvious change is the new tail section, which was transplanted wholesale from a KP Yak-23 and had the C.205’s tail wheel attachment section transplanted from the Delta 2 kit. Originally, I wanted to move the whole cockpit forward, but then just replaced canopy and spine section with a clear part from a Hobby Boss MiG-15 and putty. Other, rather cosmetic changes include clipped wing tips to match the Yak-23’s square tail surfaces shape, and the C.205’s small elliptic stabilizers were replaced with tailored, slightly bigger parts from the scrap box. A bigger/deeper radiator and a different oil cooler replaced the original parts, and I placed them under the inner wings behind the landing gear wells. Both donors come from Spitfires, even though from different kits (IIRC, the oil cooler from an AZ Models Mk. V kit and the radiator from a FROG Mk. XIV). The flaps were lowered, too, because this detail was easy to realize with this kit.

  

Painting and markings:

The HA-100 received a contemporary camouflage, the RAF Tropical Paint Scheme consisting of Dark Earth and Middle Stone with Azure Blue undersides. The pattern was adapted from RAF Spitfires, and Modelmaster (2052 and 2054) and Humbrol (157) enamels were used, with a light overall black ink washing and some post panel shading. Being a former Italian aircraft, I painted the cockpit in a typical, Italian tone, a very light grayish green called “Verde Anticorrosione“, which was used during WWII on many interior surfaces – I used a mix of Revell 59 with some 45. The landing gear and the respective wells became aluminum (Humbrol 56), though.

 

One challenge became the characteristic black-and-white REAF ID bands on the wings. These were improvised with generic decal material from TL-Modellbau: on a 1 cm wide black band I simply added two white 2.5 mm stripes, for a very good result. Most other markings belong to an early REAF MiG-15, taken from a Microscale omnibus sheet for various MiG fighters. This provided the green-trimmed white fuselage band, the roundels and the fin flash, and a white spinner completed the REAF ID markings. Unfortunately the decals turned out to be brittle (ESCI-esque...) and disintegrated upon the first attempt to apply them, so I tried to save them with Microsol Decal Film, and this actually worked like a charm, even though the resurrected decals did not adhere well to the model's surface. The REAF 2 Squadron emblem comes from a vintage PrintScale Hawker Hurricane sheet, the white code letter on the fuselage came from an Xtradecal RAF codes sheet, and the black Arabic serials came from a Begemot sheet for MiG-29s.

 

The kit received some soot stains around the exhaust ports and the gun muzzles and was finally sealed with matt acrylic varnish (Italeri).

  

Even though it’s just a modded Macchi C.205, the result looks …different. From certain angles the aircraft reminds a lot of a P-51D Mustang, like one of the lightweight prototypes? The Egyptian markings add a confusing touch, though, and while the bodywork is not perfect, I am happy with the result. The Yak-23 tail fits perfectly, and with the narrow wings the HA-100 also reminds a bit of the two-engine Westland Whirlwind?

+++ DISCLAIMER +++

Nothing you see here is real, even though the conversion or the presented background story might be based historical facts. BEWARE!

  

It took China long way to develop and produce a true supersonic fighter aircraft: in March, 1964, Shenyang Aircraft Factory began the first domestic production of the J-7 jet fighter. However, the mass production of the aircraft, which had been developed through Soviet help, license production and reverse-engineering, was severely hindered by an unexpected problem—the Cultural Revolution. This incident and its consequences resulted in poor initial quality and slow progress.

 

This, in turn, resulted in full scale production only coming about in the 1980s, by which time the J-7 design was showing its age. However, through the years the J-7 saw constant development and refinement in China.

 

One of the many directions of the prolific J-7 family was the J-7III series, later re-coded J-7C. This variant was in so far special, as it was not based on the 1st generation MiG-21F. It was rather a reverse-engineered MiG-21MF obtained from Egypt, but just like the Soviet ejection seat, the original Soviet radar failed to impress Chinese, so a domestic Chinese radar was developed for the aircraft called the "JL-7". JL-7 is a 2 cm wavelength mono pulse fire radar weighing 100 kg, with a maximum range of 28 km, and MTBF is 70 hours.

 

However, due to the limitation of Chinese avionics industry in the 1980s, the performance of the domestic Chinese fire control radars were not satisfactory, because due to their relatively large size, the nosecone had to be enlarged, resulting in decrease in aerodynamic performance of the series. As a result, only very limited numbers of this series were built.

 

The J-7III prototypes comprised a series of a total of 5 aircraft, equipped with domestically developed HTY-3 ejection seat and KL-11 auto pilot. These machines had to be powered by the domestic WP-7 engine (a copy of the MiG-21F's Tumansky R-11) because the intended WP-13F (a license build of the Tumansky R-13) failed to meet the original schedule. The J-7III was planned to enter service in 1985, but due to the delay of WP-13 development, it was not until 1987 when the design was finally certified.

 

Production of the true J-7C fighter started in 1989, when the WP-13 became available, but only a total of 17 were built until 1996. It was soon superseded by the J-7IIIA, the prototype of the more sophisticated J-7D. This upgraded all-weather fighter was equipped with KJ-11A auto pilot, JD-3II TACAN, ADS-1 air data computer, Type 563B INS, WL-7A radio compass, Type 256 radar altimeter, TKR-122 radio, 930-4 RWR, 941-4A decoy launcher, and an improved JL-7A radar.

The fighter was to be armed with PL-7 & PL-8 AAMs and carried a twin 23 mm gun (a copy of the MiG-21MF's ventral GSh-23-2 cannon). A HK-13A HUD replaced HK-03D optical sight in earlier models. The upgraded JL-7A fire control radar had look-down/shoot-down capability added.

 

The production J-7D received an uprated WP-13FI engine, and initial certification was received in November 1994, but it was not until more than a year later in December 1995 when the model was finally fully certified due to the need to certify the WP-13FI on the aircraft. But, again, the results were not satisfactory and only 32 were built until 1999.

 

Even though the J-7C and D had been developed from a much more modern basis than the earlier MiG-21F derivatives, the "new" type offered - except for the more capable radar and the all-weather capability - no considerable benefit, was even less manoueverable in dogfight situations, more complex and expensive, and also had a very limited range. What was needed was a revolutionary step forward.

 

Such a proposal came from Chengdu Aircraft Corporation's general designer Mr. Wang Zi-fang (王子方) in 1998, who had already worked on the J-7D. He proposed the addition of fuselage elements that would partly replace the inner wing sections and create lift, but also offer additional room for more and better avionics, allowing the carriage of state-of-the-art weaponry like the PL-11 AAM, together with more internal fuel. Furthermore, the adaptation of the WS-13 turbofan, a new engine for which project work had just started and which would improve both range and performance of the modified aircraft.

 

In 2000, while an alternative design, the J-7FS, had been under parallel development and cleared for service by then, CAC received green lights for a developmental technology demonstrator under the label J-7DS (S stands for Shi-yan, 试验, meaning "experimental" in Chinese).

 

While the general third generation MiG-21 outlines were retained, the blended wing/body sections - certainly inspired by US American types like the F-16 and the F-18 - and a new, taller fin changed overall proportions considerably. Esp. from above, the bigger wing planform with extended LERXes (reminiscent of the MiG Analog experimental delta wing aircraft that were used during the Tu-144 development in the Soviet union) created the impression of a much more massive and compact aircraft, even though the dimenions remained unchanged.

 

Thanks to the additional space in the BWB sections, new and better equipment could be installed, and the aerodynamics were changed, too. For instance, the J-7's air brakes under the forward fuselage were deleted and replaced by a new pair of splayed design, stabilizing the aircraft more effectively in a dive. The single air brake in front of the ventral fin was retained, though, as well as the blown flaps from the MiG-21MF.

 

The ventral gun pod with a domestic copy of the GSh-23-2 was also deleted; this space, together with the air brake compartment, was now used for a semi-recessed laser range finder, so that guided ammunition could be deployed. But a gun was retained: a new, more effective Type 30-I 30 mm (1.18 in) cannon (a copy of the Gryazev-Shipunov GSh-30-1) with 150 rounds was placed into the port LERX, under the cockpit.

Inside of the LERX on the other side, compartments for new avionics (esp. for the once more upgraded JL-7B fire control radar) were added. With this radar and weapons like the PL-11 missile, the aircraft finally achieved the long desired BVR interception capability.

 

Flanking the new, longer WS-13 engine, the BWBs held extra fuel tanks. For en even more extended range and loiter time, provisions were made for a fixed air-refuelling probe on the starboard side under the cockpit.

Under the inner wings, an additional pair of pylons was added (for a total of seven), and overall ordnance load could be raised to 3.000 kg (6.600 lb).

 

The first J-7DS first flew in summer 2005, still only powered by an WP-13I engine, for a 22-month test program. Three prototypes were built, but only the first two aircraft were to fly – the third machine was only used for static tests.

The driving force behind this program was actually the PLANAF, the People's Liberation Army, Naval Air Force (中國人民解放軍海軍航空兵). While the Chinese Air Force rather placed its bet on the more modern and sophisticated Chengdu J-10 fighter, the PLANAF was rather looking for a more simple and inexpensive multi-role combat aircraft that could carry out both air defence and strike missions, and replace the ageing (and rather ineffective) J-8 fighters and Q-5 attack aircraft, as well as early J-7II fighters with limited all-weather capability. Consequently, the type was only operated by the PLANAF from 2010 onwards and received the official designation J-7DH ("H" for 海军 [Haijun] = Navy).

 

Production was still continuing in small numbers in late 2016, but the number of built specimen is uncertain. About 150 J-7DH are supposed to be in active service, mostly with PLANAF Northern and East Fleet units. Unlike many former J-7 variants (including its ancestor, the PLAAF's more or less stillborn C and D variants), the J-7DH was not offered for export.

  

General characteristics:

Crew: 1

Length: 14.61 m (47 ft 10½ in)

15.69 m (51 ft 5 in) with pitot

Wingspan: 7,41 m (24 ft 3½ in)

Height: 4.78 m (15 ft 8½ in)

Wing area: 28.88 m² (309.8 ft²)

Aspect ratio: 2.8:1

Empty weight: 5,892 kg (12.977 lb)

Loaded weight: 8,240 kg (18.150 lb)

Max. take-off weight: 9,800 kg (21.585 lb)

 

Powerplant:

1× Guizhou WS-13 turbofan with a dry thrust of 51.2 kN (11,510 lbf)

and 84.6 kN (19,000 lbf) with afterburner

 

Performance

Maximum speed: Mach 2.0, 2,200 km/h (1.189 knots, 1.375 mph)

Stall speed: 210 km/h (114 knots, 131 mph) IAS

Combat radius: 1.050 km (568 nmi, 652 mi) (air superiority, two AAMs and three drop tanks)

Ferry range: 2,500 km (1.350 nmi, 1.550 mi)

Service ceiling: 17,500 m (57.420 ft)

Rate of climb: 195 m/s (38.386 ft/min)

 

Armament:

1× Type 30-I 30mm (1.18") cannon with 150 rounds in the port forward fuselage;

7× hardpoints (6× under-wing, 1× centerline under-fuselage) with a capacity of 3,000 kg maximum (up to 500 kg each); Ordnance primarily comprises air-to-air missiles, including PL-2, PL-5, PL-7, PL-8, PL-9 and PL-11 AAMs, but in a secondary CAS role various rocket pods an unguided bombs of up to 500kg caliber can be carried

  

The kit and its assembly:

Another Chinese whif, and again a MiG-21 derivative - a fruitful source of inspiration. The J-7DH is not based ona real world project, though, but was rather inspired by an article about a Chinese 2020 update for the MiG-21 from Japan, including some drawings and artwork.

The latter depicted a late MiG-21 with some minor mods, but also some characteristic F-16 parts like the chines and the BWB flanks grafted to it - and it looked good!

 

Since I recently butchered an Intech F-16 for my Academy T-50 conversion (primariliy donation the whole landing gear, including the wells), I had a donor kit at ahnd, and I also found a Mastercraft MiG-21MF in my stash without a true plan. So I combined both for "something Chinese"...

 

The build was pretty starightforward - except for the fact that the Intech F-16 is a rather clumsy affair (donating the fin and the fuselage flanks) and that no part from the Mastercraft MiG-21 matches with another one! Lots of improvisation and mods were necessary.

On the other side, the F-16 parts were just glued onto the MiG-21 fuselage and blended into one with putty (in several layers, though).

 

The fin was taken wholesale from the F-16, but clipped by about 5mm at the top. I originally wanted to use F-16 wings with wing tip launch rails and the stabilizers, too, but when I held them to the model it looked wacky - so I reverted to the Fishbed parts. The stabilizers were taken OOB, but the wing span was reduced at the roots, so that the original MiG-21 wing span was retained. Only the landing gear wells had to be adapted accordingly, but that was easier than expected and the result looks very organic.

 

With more wing area, I added a third pair of hardpoints under the wing roots, and I kept the gun under the cockpit in the LERX. That offered room inside of the fuselage, filled by a laser rangefinder in a canoe fairing where the original gun used to be.

 

On the tail, a new jet nozzle was mounted, on the fuselage some air scoops and antennae were added an an IR sensor on the nose. A new seat was used in the cockpit instead of the poor L-shaped OOB thing. The PL-2 & -11 ordnance consists of simple AIM-9Bs and slightly modified AIM-120, plus some launch rails from the scrap box.

  

Paintings and markings:

Modern Chinese military aircraft are hardly benchmarks for creative paint schemes - and the only "realistic" option in this case would have been a uniform grey livery. The original J-7C PLAAF night fighters carried a high contrast sand/dark green/light blue livery, similar to the MiG-21 export scheme (a.k.a. "Pumpkin"), but I found the latter not suitabel for a naval operator.

 

I eventually found a compromise, using one of the J-7C schemes as pattern but using grey tones instead - still not very colorful, but the "clover" patterns would help disrupt the aircraft's outlines and support the modern look and feel of this whif.

 

Basic colors are Humbrol 140 (Dark Gull Grey, FS 36231) and 165 (RAF Medium Sea Grey) from above, plus 122 (IAF Pale Blue, FS 35622) on the undersides. With the dark grey pattern placed with no direct connection to the Pale Blue undersides, there's even a blending effect between the tones - not spectacular, but IMHO effective.

 

The cockpit interior became pale teal (a mix of Soviet Cockpit Blue and white), while the landing gear wells were painted with a mix of Humbrol 56, 119 and 225 - for a yellow-ish, dull metallic brown. The wheel discs became bright green (Humbrol 131), and any di-electric panel and the radome became deep green (Humbrol 2).

 

The decals come from a Begemot MiG-21 sheet (roundels), while the tactical 5-digit code comes from an Airfix 1:72 B-17 sheet. The yellow code is a bit unusual, as well as its place on the fin, but both occur on Chinese fighters.

The code itself is based on the information published in the 2010 book “Chinese Air Power” by Yefim Gordon und Dmitriy Komissarov, where the Chinese code system is explained – I hope that it is more or less authentic.

 

The kit received a light black ink wash and some dry painting with lighter blue-grey shades, but no weathering, since modern Chinese aircraft tend to look pretty clean and pristine. Since the kits both did not feature much surface details, and a lot of the few OOB details got lost during the PSR process for the BWB wing sections, I painted some details and panel lines with a soft pencil - a compromise, though. Finally, the kit was sealed with matt acrylic varnish.

  

The result is a pretty subtle whif, and with the F-16 parts added the result even looks very conclusive! From above, the extra fuselage width makes the Fishbed look very massive, which is underlined by the extended stabilizer span. But I think that retailing the original MiG-21 delta wing was a good decision, because it helps retaining the Fishbed's "fast" look.

I am just not 100% happy with the finish - but for the crappy kits I used as basis it's O.K.

 

The Taj Mahal (/ˌtɑːdʒ məˈhɑːl/, more often /ˈtɑːʒ/; from Persian and Arabic, "crown of palaces", pronounced [ˈt̪aːdʒ mɛˈɦɛl]) is a white marble mausoleum located on the southern bank of Yamuna River in the Indian city of Agra. It was commissioned in 1632 by the Mughal emperor Shah Jahan (reigned 1628–1658) to house the tomb of his favorite wife of three, Mumtaz Mahal.

 

Construction of the mausoleum was essentially completed in 1643 but work continued on other phases of the project for an additional ten years. The Taj Mahal complex is believed to have been completed in its entirety in 1653 at a cost estimated at the time to be around 32 million Indian rupees, which in 2015 would be valued at around 52.8 billion Indian rupees ($827 million US). The construction project employed around 20,000 artisans under the guidance of a board of architects led by Ustad Ahmad Lahauri. The domed marble tomb is part of an integrated complex consisting of gardens and two red-sandstone buildings surrounded by a crenellated wall on three sides.

 

The Taj Mahal is regarded by many as the best example of Mughal architecture and is widely recognized as "the jewel of Muslim art in India". It is one of the world’s most celebrated structures and a symbol of India’s rich history. Designated a UNESCO World Heritage Site in 1983, the Taj Mahal attracts some 3 million visitors a year.

 

INSPIRATION

In 1631, Shah Jahan, emperor during the Mughal empire's period of greatest prosperity, was grief-stricken when his favorite of three wives and beloved companion, Mumtaz Mahal, a Persian princess, died during the birth of their 14th child, Gauhara Begum. Construction of the Taj Mahal began in 1632. The court chronicles of Shah Jahan's grief illustrate the love story traditionally held as an inspiration for Taj Mahal. The principal mausoleum was completed in 1643 and the surrounding buildings and garden were finished about five years later.

 

ARCHITECTURE AND DESIGN

The Taj Mahal incorporates and expands on design traditions of Persian and earlier Mughal architecture. Specific inspiration came from successful Timurid and Mughal buildings including; the Gur-e Amir (the tomb of Timur, progenitor of the Mughal dynasty, in Samarkand), Humayun's Tomb, Itmad-Ud-Daulah's Tomb (sometimes called the Baby Taj), and Shah Jahan's own Jama Masjid in Delhi. While earlier Mughal buildings were primarily constructed of red sandstone, Shah Jahan promoted the use of white marble inlaid with semi-precious stones. Buildings under his patronage reached new levels of refinement.

 

TOMB

The tomb is the central focus of the entire complex of the Taj Mahal. It is a large, white marble structure standing on a square plinth and consists of a symmetrical building with an iwan (an arch-shaped doorway) topped by a large dome and finial. Like most Mughal tombs, the basic elements are Persian in origin.

 

The base structure is a large multi-chambered cube with chamfered corners forming an unequal eight-sided structure that is approximately 55 metres on each of the four long sides. Each side of the iwan is framed with a huge pishtaq or vaulted archway with two similarly shaped arched balconies stacked on either side. This motif of stacked pishtaqs is replicated on the chamfered corner areas, making the design completely symmetrical on all sides of the building. Four minarets frame the tomb, one at each corner of the plinth facing the chamfered corners. The main chamber houses the false sarcophagi of Mumtaz Mahal and Shah Jahan; the actual graves are at a lower level.

 

The most spectacular feature is the marble dome that surmounts the tomb. The dome is nearly 35 metres high which is close in measurement to the length of the base, and accentuated by the cylindrical "drum" it sits on which is approximately 7 metres high. Because of its shape, the dome is often called an onion dome or amrud (guava dome). The top is decorated with a lotus design which also serves to accentuate its height. The shape of the dome is emphasized by four smaller domed chattris (kiosks) placed at its corners, which replicate the onion shape of the main dome. Their columned bases open through the roof of the tomb and provide light to the interior. Tall decorative spires (guldastas) extend from edges of base walls, and provide visual emphasis to the height of the dome. The lotus motif is repeated on both the chattris and guldastas. The dome and chattris are topped by a gilded finial which mixes traditional Persian and Hindustani decorative elements.

 

The main finial was originally made of gold but was replaced by a copy made of gilded bronze in the early 19th century. This feature provides a clear example of integration of traditional Persian and Hindu decorative elements. The finial is topped by a moon, a typical Islamic motif whose horns point heavenward.

 

The minarets, which are each more than 40 metres tall, display the designer's penchant for symmetry. They were designed as working minarets - a traditional element of mosques, used by the muezzin to call the Islamic faithful to prayer. Each minaret is effectively divided into three equal parts by two working balconies that ring the tower. At the top of the tower is a final balcony surmounted by a chattri that mirrors the design of those on the tomb. The chattris all share the same decorative elements of a lotus design topped by a gilded finial. The minarets were constructed slightly outside of the plinth so that in the event of collapse, a typical occurrence with many tall constructions of the period, the material from the towers would tend to fall away from the tomb.

 

EXTERIOR DECORATIONS

The exterior decorations of the Taj Mahal are among the finest in Mughal architecture. As the surface area changes, the decorations are refined proportionally. The decorative elements were created by applying paint, stucco, stone inlays or carvings. In line with the Islamic prohibition against the use of anthropomorphic forms, the decorative elements can be grouped into either calligraphy, abstract forms or vegetative motifs. Throughout the complex are passages from the Qur'an that comprise some of the decorative elements. Recent scholarship suggests that the passages were chosen by Amanat Khan.

 

The calligraphy on the Great Gate reads "O Soul, thou art at rest. Return to the Lord at peace with Him, and He at peace with you." The calligraphy was created in 1609 by a calligrapher named Abdul Haq. Shah Jahan conferred the title of "Amanat Khan" upon him as a reward for his "dazzling virtuosity". Near the lines from the Qur'an at the base of the interior dome is the inscription, "Written by the insignificant being, Amanat Khan Shirazi." Much of the calligraphy is composed of florid thuluth script made of jasper or black marble inlaid in white marble panels. Higher panels are written in slightly larger script to reduce the skewing effect when viewed from below. The calligraphy found on the marble cenotaphs in the tomb is particularly detailed and delicate.

 

Abstract forms are used throughout, especially in the plinth, minarets, gateway, mosque, jawab and, to a lesser extent, on the surfaces of the tomb. The domes and vaults of the sandstone buildings are worked with tracery of incised painting to create elaborate geometric forms. Herringbone inlays define the space between many of the adjoining elements. White inlays are used in sandstone buildings, and dark or black inlays on the white marbles. Mortared areas of the marble buildings have been stained or painted in a contrasting color which creates a complex array of geometric patterns. Floors and walkways use contrasting tiles or blocks in tessellation patterns.

 

On the lower walls of the tomb are white marble dados sculpted with realistic bas relief depictions of flowers and vines. The marble has been polished to emphasise the exquisite detailing of the carvings. The dado frames and archway spandrels have been decorated with pietra dura inlays of highly stylised, almost geometric vines, flowers and fruits. The inlay stones are of yellow marble, jasper and jade, polished and levelled to the surface of the walls.

 

INTERIOR DECORATION

The interior chamber of the Taj Mahal reaches far beyond traditional decorative elements. The inlay work is not pietra dura, but a lapidary of precious and semiprecious gemstones. The inner chamber is an octagon with the design allowing for entry from each face, although only the door facing the garden to the south is used. The interior walls are about 25 metres high and are topped by a "false" interior dome decorated with a sun motif. Eight pishtaq arches define the space at ground level and, as with the exterior, each lower pishtaq is crowned by a second pishtaq about midway up the wall. The four central upper arches form balconies or viewing areas, and each balcony's exterior window has an intricate screen or jali cut from marble. In addition to the light from the balcony screens, light enters through roof openings covered by chattris at the corners. The octagonal marble screen or jali bordering the cenotaphs is made from eight marble panels carved through with intricate pierce work. The remaining surfaces are inlaid in delicate detail with semi-precious stones forming twining vines, fruits and flowers. Each chamber wall is highly decorated with dado bas-relief, intricate lapidary inlay and refined calligraphy panels which reflect, in miniature detail, the design elements seen throughout the exterior of the complex.

 

Muslim tradition forbids elaborate decoration of graves. Hence, the bodies of Mumtaz and Shah Jahan were put in a relatively plain crypt beneath the inner chamber with their faces turned right, towards Mecca. Mumtaz Mahal's cenotaph is placed at the precise centre of the inner chamber on a rectangular marble base of 1.5 by 2.5 metres. Both the base and casket are elaborately inlaid with precious and semiprecious gems. Calligraphic inscriptions on the casket identify and praise Mumtaz. On the lid of the casket is a raised rectangular lozenge meant to suggest a writing tablet. Shah Jahan's cenotaph is beside Mumtaz's to the western side, and is the only visible asymmetric element in the entire complex. His cenotaph is bigger than his wife's, but reflects the same elements: a larger casket on a slightly taller base precisely decorated with lapidary and calligraphy that identifies him. On the lid of the casket is a traditional sculpture of a small pen box.

 

The pen box and writing tablet are traditional Mughal funerary icons decorating the caskets of men and women respectively. The Ninety Nine Names of God are calligraphic inscriptions on the sides of the actual tomb of Mumtaz Mahal. Other inscriptions inside the crypt include, "O Noble, O Magnificent, O Majestic, O Unique, O Eternal, O Glorious... ". The tomb of Shah Jahan bears a calligraphic inscription that reads; "He travelled from this world to the banquet-hall of Eternity on the night of the twenty-sixth of the month of Rajab, in the year 1076 Hijri."

 

GARDEN

The complex is set around a large 300-metre square charbagh or Mughal garden. The garden uses raised pathways that divide each of the four quarters of the garden into 16 sunken parterres or flowerbeds. Halfway between the tomb and gateway in the center of the garden is a raised marble water tank with a reflecting pool positioned on a north-south axis to reflect the image of the mausoleum. The raised marble water tank is called al Hawd al-Kawthar in reference to the "Tank of Abundance" promised to Muhammad.

 

Elsewhere, the garden is laid out with avenues of trees and fountains. The charbagh garden, a design inspired by Persian gardens, was introduced to India by Babur, the first Mughal emperor. It symbolises the four flowing rivers of Jannah (Paradise) and reflects the Paradise garden derived from the Persian paridaeza, meaning 'walled garden'. In mystic Islamic texts of the Mughal period, Paradise is described as an ideal garden of abundance with four rivers flowing from a central spring or mountain, separating the garden into north, west, south and east.

 

Most Mughal charbaghs are rectangular with a tomb or pavilion in the center. The Taj Mahal garden is unusual in that the main element, the tomb, is located at the end of the garden. With the discovery of Mahtab Bagh or "Moonlight Garden" on the other side of the Yamuna, the interpretation of the Archaeological Survey of India is that the Yamuna river itself was incorporated into the garden's design and was meant to be seen as one of the rivers of Paradise. Similarities in layout and architectural features with the Shalimar Gardens suggests both gardens may have been designed by the same architect, Ali Mardan. Early accounts of the garden describe its profusion of vegetation, including abundant roses, daffodils, and fruit trees. As the Mughal Empire declined, the Taj Mahal and its gardens also declined. By the end of the 19th century, the British Empire controlled more than three-fifths of India, and assumed management of the Taj Mahal. They changed the landscaping to their liking which more closely resembled the formal lawns of London.

 

OUTLYING BUILDINGS

The Taj Mahal complex is bordered on three sides by crenellated red sandstone walls; the side facing the river is open. Outside the walls are several additional mausoleums, including those of Shah Jahan's other wives, and a larger tomb for Mumtaz's favourite servant.

 

The main gateway (darwaza) is a monumental structure built primarily of marble, and reminiscent of the Mughal architecture of earlier emperors. Its archways mirror the shape of the tomb's archways, and its pishtaq arches incorporate the calligraphy that decorates the tomb. The vaulted ceilings and walls have elaborate geometric designs like those found in the other sandstone buildings in the complex.

 

At the far end of the complex are two grand red sandstone buildings that mirror each other, and face the sides of the tomb. The backs of the buildings parallel the western and eastern walls. The western building is a mosque and the other is the jawab (answer), thought to have been constructed for architectural balance although it may have been used as a guesthouse. Distinctions between the two buildings include the jawab's lack of a mihrab (a niche in a mosque's wall facing Mecca), and its floors of geometric design whereas the floor of the mosque is laid with outlines of 569 prayer rugs in black marble. The mosque's basic design of a long hall surmounted by three domes is similar to others built by Shah Jahan, particularly the Masjid-i Jahān-Numā, or Jama Masjid, Delhi. The Mughal mosques of this period divide the sanctuary hall into three areas comprising a main sanctuary and slightly smaller sanctuaries on either side. At the Taj Mahal, each sanctuary opens onto an expansive vaulting dome. The outlying buildings were completed in 1643.

 

CONSTRUCTION

The Taj Mahal is built on a parcel of land to the south of the walled city of Agra. Shah Jahan presented Maharajah Jai Singh with a large palace in the center of Agra in exchange for the land. An area of roughly three acres was excavated, filled with dirt to reduce seepage, and leveled at 50 metres above riverbank. In the tomb area, wells were dug and filled with stone and rubble to form the footings of the tomb. Instead of lashed bamboo, workmen constructed a colossal brick scaffold that mirrored the tomb. The scaffold was so enormous that foremen estimated it would take years to dismantle.

 

The Taj Mahal was constructed using materials from all over India and Asia. It is believed over 1,000 elephants were used to transport building materials. The translucent white marble was brought from Makrana, Rajasthan, the jasper from Punjab, jade and crystal from China. The turquoise was from Tibet and the Lapis lazuli from Afghanistan, while the sapphire came from Sri Lanka and the carnelian from Arabia. In all, twenty eight types of precious and semi-precious stones were inlaid into the white marble.

 

According to the legend, Shah Jahan decreed that anyone could keep the bricks taken from the scaffold, and thus it was dismantled by peasants overnight. A fifteen kilometer tamped-earth ramp was built to transport marble and materials to the construction site and teams of twenty or thirty oxen pulled the blocks on specially constructed wagons. An elaborate post-and-beam pulley system was used to raise the blocks into desired position. Water was drawn from the river by a series of purs, an animal-powered rope and bucket mechanism, into a large storage tank and raised to a large distribution tank. It was passed into three subsidiary tanks, from which it was piped to the complex.

 

The plinth and tomb took roughly 12 years to complete. The remaining parts of the complex took an additional 10 years and were completed in order of minarets, mosque and jawab, and gateway. Since the complex was built in stages, discrepancies exist in completion dates due to differing opinions on "completion". Construction of the mausoleum itself was essentially completed by 1643 while work continued on the outlying buildings. Estimates of the cost of construction vary due to difficulties in estimating costs across time. The total cost has been estimated to be about 32 million Indian rupees, which is around 52.8 billion Indian rupees ($827 million US) based on 2015 values.

 

LATER DAYS

Abdul Hamid Lahauri in his book Badshahnama refers to Taj Mahal as rauza-i munawwara, meaning the illumined or illustrious tomb. Soon after the Taj Mahal's completion, Shah Jahan was deposed by his son Aurangzeb and put under house arrest at nearby Agra Fort. Upon Shah Jahan's death, Aurangzeb buried him in the mausoleum next to his wife. In the 18th century, the Jat rulers of Bharatpur invaded Agra and attacked the Taj Mahal, the two chandeliers, one of agate and another of silver, which were hung over the main cenotaph, were taken away by them, along with the gold and silver screen. Kanbo, a Mughal historian, said the gold shield which covered the 15-foot high finial at the top of the main dome was also removed during the Jat despoliation.

 

By the late 19th century, parts of the buildings had fallen into disrepair. During the time of the Indian rebellion of 1857, the Taj Mahal was defaced by British soldiers and government officials, who chiselled out precious stones and lapis lazuli from its walls. At the end of the 19th century, British viceroy Lord Curzon ordered a sweeping restoration project, which was completed in 1908. He also commissioned the large lamp in the interior chamber, modelled after one in a Cairo mosque. During this time the garden was remodelled with British-style lawns that are still in place today.

 

THREATS

In 1942, the government erected a scaffolding to disguise the building in anticipation of air attacks by the Japanese Air Force. During the India-Pakistan wars of 1965 and 1971, scaffoldings were again erected to mislead bomber pilots.

 

More recent threats have come from environmental pollution on the banks of Yamuna River including acid rain due to the Mathura Oil Refinery, which was opposed by Supreme Court of India directives. The pollution has been turning the Taj Mahal yellow. To help control the pollution, the Indian government has set up the Taj Trapezium Zone (TTZ), a 10,400-square-kilometre area around the monument where strict emissions standards are in place.

 

Concerns for the tomb's structural integrity have recently been raised because of a decline in the groundwater level in the Yamuna river basin which is falling at a rate of around 5 feet a year. In 2010, cracks appeared in parts of the tomb, and the minarets which surround the monument were showing signs of tilting, as the wooden foundation of the tomb may be rotting due to lack of water. In 2011 it was reported that some predictions indicated that the tomb could collapse within 5 years.

 

TOURISM

The Taj Mahal attracts a large number of tourists. UNESCO documented more than 2 million visitors in 2001, which increased to about 3 million in 2015. A two tier pricing system is in place, with a significantly lower entrance fee for Indian citizens and a more expensive one for foreigners. Most tourists visit in the cooler months of October, November and February. Polluting traffic is not allowed near the complex and tourists must either walk from parking lots or catch an electric bus. The Khawasspuras (northern courtyards) are currently being restored for use as a new visitor center.

 

The small town to the south of the Taj, known as Taj Ganji or Mumtazabad, was originally constructed with caravanserais, bazaars and markets to serve the needs of visitors and workmen. Lists of recommended travel destinations often feature the Taj Mahal, which also appears in several listings of seven wonders of the modern world, including the recently announced New Seven Wonders of the World, a recent poll with 100 million votes.

 

The grounds are open from 06:00 to 19:00 weekdays, except for Friday when the complex is open for prayers at the mosque between 12:00 and 14:00. The complex is open for night viewing on the day of the full moon and two days before and after, excluding Fridays and the month of Ramadan. For security reasons only five items - water in transparent bottles, small video cameras, still cameras, mobile phones and small ladies' purses - are allowed inside the Taj Mahal.

 

MYTHS

Ever since its construction, the building has been the source of an admiration transcending culture and geography, and so personal and emotional responses have consistently eclipsed scholastic appraisals of the monument. A longstanding myth holds that Shah Jahan planned a mausoleum to be built in black marble as a Black Taj Mahal across the Yamuna river. The idea originates from fanciful writings of Jean-Baptiste Tavernier, a European traveller who visited Agra in 1665. It was suggested that Shah Jahan was overthrown by his son Aurangzeb before it could be built. Ruins of blackened marble across the river in Moonlight Garden, Mahtab Bagh, seemed to support this legend. However, excavations carried out in the 1990s found that they were discolored white stones that had turned black. A more credible theory for the origins of the black mausoleum was demonstrated in 2006 by archaeologists who reconstructed part of the pool in the Moonlight Garden. A dark reflection of the white mausoleum could clearly be seen, befitting Shah Jahan's obsession with symmetry and the positioning of the pool itself.

 

No evidence exists for claims that describe, often in horrific detail, the deaths, dismemberments and mutilations which Shah Jahan supposedly inflicted on various architects and craftsmen associated with the tomb. Some stories claim that those involved in construction signed contracts committing themselves to have no part in any similar design. Similar claims are made for many famous buildings. No evidence exists for claims that Lord William Bentinck, governor-general of India in the 1830s, supposedly planned to demolish the Taj Mahal and auction off the marble. Bentinck's biographer John Rosselli says that the story arose from Bentinck's fund-raising sale of discarded marble from Agra Fort.

 

Another myth suggests that beating the silhouette of the finial will cause water to come forth. To this day, officials find broken bangles surrounding the silhouette.

 

In 2000, India's Supreme Court dismissed P. N. Oak's petition to declare that a Hindu king built the Taj Mahal. In 2005 a similar petition was dismissed by the Allahabad High Court. This case was brought by Amar Nath Mishra, a social worker and preacher who says that the Taj Mahal was built by the Hindu King Parmar Dev in 1196.

 

WIKIPEDIA

The Taj Mahal (/ˌtɑːdʒ məˈhɑːl/, more often /ˈtɑːʒ/; from Persian and Arabic, "crown of palaces", pronounced [ˈt̪aːdʒ mɛˈɦɛl]) is a white marble mausoleum located on the southern bank of Yamuna River in the Indian city of Agra. It was commissioned in 1632 by the Mughal emperor Shah Jahan (reigned 1628–1658) to house the tomb of his favorite wife of three, Mumtaz Mahal.

 

Construction of the mausoleum was essentially completed in 1643 but work continued on other phases of the project for an additional ten years. The Taj Mahal complex is believed to have been completed in its entirety in 1653 at a cost estimated at the time to be around 32 million Indian rupees, which in 2015 would be valued at around 52.8 billion Indian rupees ($827 million US). The construction project employed around 20,000 artisans under the guidance of a board of architects led by Ustad Ahmad Lahauri. The domed marble tomb is part of an integrated complex consisting of gardens and two red-sandstone buildings surrounded by a crenellated wall on three sides.

 

The Taj Mahal is regarded by many as the best example of Mughal architecture and is widely recognized as "the jewel of Muslim art in India". It is one of the world’s most celebrated structures and a symbol of India’s rich history. Designated a UNESCO World Heritage Site in 1983, the Taj Mahal attracts some 3 million visitors a year.

 

INSPIRATION

In 1631, Shah Jahan, emperor during the Mughal empire's period of greatest prosperity, was grief-stricken when his favorite of three wives and beloved companion, Mumtaz Mahal, a Persian princess, died during the birth of their 14th child, Gauhara Begum. Construction of the Taj Mahal began in 1632. The court chronicles of Shah Jahan's grief illustrate the love story traditionally held as an inspiration for Taj Mahal. The principal mausoleum was completed in 1643 and the surrounding buildings and garden were finished about five years later.

 

ARCHITECTURE AND DESIGN

The Taj Mahal incorporates and expands on design traditions of Persian and earlier Mughal architecture. Specific inspiration came from successful Timurid and Mughal buildings including; the Gur-e Amir (the tomb of Timur, progenitor of the Mughal dynasty, in Samarkand), Humayun's Tomb, Itmad-Ud-Daulah's Tomb (sometimes called the Baby Taj), and Shah Jahan's own Jama Masjid in Delhi. While earlier Mughal buildings were primarily constructed of red sandstone, Shah Jahan promoted the use of white marble inlaid with semi-precious stones. Buildings under his patronage reached new levels of refinement.

 

TOMB

The tomb is the central focus of the entire complex of the Taj Mahal. It is a large, white marble structure standing on a square plinth and consists of a symmetrical building with an iwan (an arch-shaped doorway) topped by a large dome and finial. Like most Mughal tombs, the basic elements are Persian in origin.

 

The base structure is a large multi-chambered cube with chamfered corners forming an unequal eight-sided structure that is approximately 55 metres on each of the four long sides. Each side of the iwan is framed with a huge pishtaq or vaulted archway with two similarly shaped arched balconies stacked on either side. This motif of stacked pishtaqs is replicated on the chamfered corner areas, making the design completely symmetrical on all sides of the building. Four minarets frame the tomb, one at each corner of the plinth facing the chamfered corners. The main chamber houses the false sarcophagi of Mumtaz Mahal and Shah Jahan; the actual graves are at a lower level.

 

The most spectacular feature is the marble dome that surmounts the tomb. The dome is nearly 35 metres high which is close in measurement to the length of the base, and accentuated by the cylindrical "drum" it sits on which is approximately 7 metres high. Because of its shape, the dome is often called an onion dome or amrud (guava dome). The top is decorated with a lotus design which also serves to accentuate its height. The shape of the dome is emphasized by four smaller domed chattris (kiosks) placed at its corners, which replicate the onion shape of the main dome. Their columned bases open through the roof of the tomb and provide light to the interior. Tall decorative spires (guldastas) extend from edges of base walls, and provide visual emphasis to the height of the dome. The lotus motif is repeated on both the chattris and guldastas. The dome and chattris are topped by a gilded finial which mixes traditional Persian and Hindustani decorative elements.

 

The main finial was originally made of gold but was replaced by a copy made of gilded bronze in the early 19th century. This feature provides a clear example of integration of traditional Persian and Hindu decorative elements. The finial is topped by a moon, a typical Islamic motif whose horns point heavenward.

 

The minarets, which are each more than 40 metres tall, display the designer's penchant for symmetry. They were designed as working minarets - a traditional element of mosques, used by the muezzin to call the Islamic faithful to prayer. Each minaret is effectively divided into three equal parts by two working balconies that ring the tower. At the top of the tower is a final balcony surmounted by a chattri that mirrors the design of those on the tomb. The chattris all share the same decorative elements of a lotus design topped by a gilded finial. The minarets were constructed slightly outside of the plinth so that in the event of collapse, a typical occurrence with many tall constructions of the period, the material from the towers would tend to fall away from the tomb.

 

EXTERIOR DECORATIONS

The exterior decorations of the Taj Mahal are among the finest in Mughal architecture. As the surface area changes, the decorations are refined proportionally. The decorative elements were created by applying paint, stucco, stone inlays or carvings. In line with the Islamic prohibition against the use of anthropomorphic forms, the decorative elements can be grouped into either calligraphy, abstract forms or vegetative motifs. Throughout the complex are passages from the Qur'an that comprise some of the decorative elements. Recent scholarship suggests that the passages were chosen by Amanat Khan.

 

The calligraphy on the Great Gate reads "O Soul, thou art at rest. Return to the Lord at peace with Him, and He at peace with you." The calligraphy was created in 1609 by a calligrapher named Abdul Haq. Shah Jahan conferred the title of "Amanat Khan" upon him as a reward for his "dazzling virtuosity". Near the lines from the Qur'an at the base of the interior dome is the inscription, "Written by the insignificant being, Amanat Khan Shirazi." Much of the calligraphy is composed of florid thuluth script made of jasper or black marble inlaid in white marble panels. Higher panels are written in slightly larger script to reduce the skewing effect when viewed from below. The calligraphy found on the marble cenotaphs in the tomb is particularly detailed and delicate.

 

Abstract forms are used throughout, especially in the plinth, minarets, gateway, mosque, jawab and, to a lesser extent, on the surfaces of the tomb. The domes and vaults of the sandstone buildings are worked with tracery of incised painting to create elaborate geometric forms. Herringbone inlays define the space between many of the adjoining elements. White inlays are used in sandstone buildings, and dark or black inlays on the white marbles. Mortared areas of the marble buildings have been stained or painted in a contrasting color which creates a complex array of geometric patterns. Floors and walkways use contrasting tiles or blocks in tessellation patterns.

 

On the lower walls of the tomb are white marble dados sculpted with realistic bas relief depictions of flowers and vines. The marble has been polished to emphasise the exquisite detailing of the carvings. The dado frames and archway spandrels have been decorated with pietra dura inlays of highly stylised, almost geometric vines, flowers and fruits. The inlay stones are of yellow marble, jasper and jade, polished and levelled to the surface of the walls.

 

INTERIOR DECORATION

The interior chamber of the Taj Mahal reaches far beyond traditional decorative elements. The inlay work is not pietra dura, but a lapidary of precious and semiprecious gemstones. The inner chamber is an octagon with the design allowing for entry from each face, although only the door facing the garden to the south is used. The interior walls are about 25 metres high and are topped by a "false" interior dome decorated with a sun motif. Eight pishtaq arches define the space at ground level and, as with the exterior, each lower pishtaq is crowned by a second pishtaq about midway up the wall. The four central upper arches form balconies or viewing areas, and each balcony's exterior window has an intricate screen or jali cut from marble. In addition to the light from the balcony screens, light enters through roof openings covered by chattris at the corners. The octagonal marble screen or jali bordering the cenotaphs is made from eight marble panels carved through with intricate pierce work. The remaining surfaces are inlaid in delicate detail with semi-precious stones forming twining vines, fruits and flowers. Each chamber wall is highly decorated with dado bas-relief, intricate lapidary inlay and refined calligraphy panels which reflect, in miniature detail, the design elements seen throughout the exterior of the complex.

 

Muslim tradition forbids elaborate decoration of graves. Hence, the bodies of Mumtaz and Shah Jahan were put in a relatively plain crypt beneath the inner chamber with their faces turned right, towards Mecca. Mumtaz Mahal's cenotaph is placed at the precise centre of the inner chamber on a rectangular marble base of 1.5 by 2.5 metres. Both the base and casket are elaborately inlaid with precious and semiprecious gems. Calligraphic inscriptions on the casket identify and praise Mumtaz. On the lid of the casket is a raised rectangular lozenge meant to suggest a writing tablet. Shah Jahan's cenotaph is beside Mumtaz's to the western side, and is the only visible asymmetric element in the entire complex. His cenotaph is bigger than his wife's, but reflects the same elements: a larger casket on a slightly taller base precisely decorated with lapidary and calligraphy that identifies him. On the lid of the casket is a traditional sculpture of a small pen box.

 

The pen box and writing tablet are traditional Mughal funerary icons decorating the caskets of men and women respectively. The Ninety Nine Names of God are calligraphic inscriptions on the sides of the actual tomb of Mumtaz Mahal. Other inscriptions inside the crypt include, "O Noble, O Magnificent, O Majestic, O Unique, O Eternal, O Glorious... ". The tomb of Shah Jahan bears a calligraphic inscription that reads; "He travelled from this world to the banquet-hall of Eternity on the night of the twenty-sixth of the month of Rajab, in the year 1076 Hijri."

 

GARDEN

The complex is set around a large 300-metre square charbagh or Mughal garden. The garden uses raised pathways that divide each of the four quarters of the garden into 16 sunken parterres or flowerbeds. Halfway between the tomb and gateway in the center of the garden is a raised marble water tank with a reflecting pool positioned on a north-south axis to reflect the image of the mausoleum. The raised marble water tank is called al Hawd al-Kawthar in reference to the "Tank of Abundance" promised to Muhammad.

 

Elsewhere, the garden is laid out with avenues of trees and fountains. The charbagh garden, a design inspired by Persian gardens, was introduced to India by Babur, the first Mughal emperor. It symbolises the four flowing rivers of Jannah (Paradise) and reflects the Paradise garden derived from the Persian paridaeza, meaning 'walled garden'. In mystic Islamic texts of the Mughal period, Paradise is described as an ideal garden of abundance with four rivers flowing from a central spring or mountain, separating the garden into north, west, south and east.

 

Most Mughal charbaghs are rectangular with a tomb or pavilion in the center. The Taj Mahal garden is unusual in that the main element, the tomb, is located at the end of the garden. With the discovery of Mahtab Bagh or "Moonlight Garden" on the other side of the Yamuna, the interpretation of the Archaeological Survey of India is that the Yamuna river itself was incorporated into the garden's design and was meant to be seen as one of the rivers of Paradise. Similarities in layout and architectural features with the Shalimar Gardens suggests both gardens may have been designed by the same architect, Ali Mardan. Early accounts of the garden describe its profusion of vegetation, including abundant roses, daffodils, and fruit trees. As the Mughal Empire declined, the Taj Mahal and its gardens also declined. By the end of the 19th century, the British Empire controlled more than three-fifths of India, and assumed management of the Taj Mahal. They changed the landscaping to their liking which more closely resembled the formal lawns of London.

 

OUTLYING BUILDINGS

The Taj Mahal complex is bordered on three sides by crenellated red sandstone walls; the side facing the river is open. Outside the walls are several additional mausoleums, including those of Shah Jahan's other wives, and a larger tomb for Mumtaz's favourite servant.

 

The main gateway (darwaza) is a monumental structure built primarily of marble, and reminiscent of the Mughal architecture of earlier emperors. Its archways mirror the shape of the tomb's archways, and its pishtaq arches incorporate the calligraphy that decorates the tomb. The vaulted ceilings and walls have elaborate geometric designs like those found in the other sandstone buildings in the complex.

 

At the far end of the complex are two grand red sandstone buildings that mirror each other, and face the sides of the tomb. The backs of the buildings parallel the western and eastern walls. The western building is a mosque and the other is the jawab (answer), thought to have been constructed for architectural balance although it may have been used as a guesthouse. Distinctions between the two buildings include the jawab's lack of a mihrab (a niche in a mosque's wall facing Mecca), and its floors of geometric design whereas the floor of the mosque is laid with outlines of 569 prayer rugs in black marble. The mosque's basic design of a long hall surmounted by three domes is similar to others built by Shah Jahan, particularly the Masjid-i Jahān-Numā, or Jama Masjid, Delhi. The Mughal mosques of this period divide the sanctuary hall into three areas comprising a main sanctuary and slightly smaller sanctuaries on either side. At the Taj Mahal, each sanctuary opens onto an expansive vaulting dome. The outlying buildings were completed in 1643.

 

CONSTRUCTION

The Taj Mahal is built on a parcel of land to the south of the walled city of Agra. Shah Jahan presented Maharajah Jai Singh with a large palace in the center of Agra in exchange for the land. An area of roughly three acres was excavated, filled with dirt to reduce seepage, and leveled at 50 metres above riverbank. In the tomb area, wells were dug and filled with stone and rubble to form the footings of the tomb. Instead of lashed bamboo, workmen constructed a colossal brick scaffold that mirrored the tomb. The scaffold was so enormous that foremen estimated it would take years to dismantle.

 

The Taj Mahal was constructed using materials from all over India and Asia. It is believed over 1,000 elephants were used to transport building materials. The translucent white marble was brought from Makrana, Rajasthan, the jasper from Punjab, jade and crystal from China. The turquoise was from Tibet and the Lapis lazuli from Afghanistan, while the sapphire came from Sri Lanka and the carnelian from Arabia. In all, twenty eight types of precious and semi-precious stones were inlaid into the white marble.

 

According to the legend, Shah Jahan decreed that anyone could keep the bricks taken from the scaffold, and thus it was dismantled by peasants overnight. A fifteen kilometer tamped-earth ramp was built to transport marble and materials to the construction site and teams of twenty or thirty oxen pulled the blocks on specially constructed wagons. An elaborate post-and-beam pulley system was used to raise the blocks into desired position. Water was drawn from the river by a series of purs, an animal-powered rope and bucket mechanism, into a large storage tank and raised to a large distribution tank. It was passed into three subsidiary tanks, from which it was piped to the complex.

 

The plinth and tomb took roughly 12 years to complete. The remaining parts of the complex took an additional 10 years and were completed in order of minarets, mosque and jawab, and gateway. Since the complex was built in stages, discrepancies exist in completion dates due to differing opinions on "completion". Construction of the mausoleum itself was essentially completed by 1643 while work continued on the outlying buildings. Estimates of the cost of construction vary due to difficulties in estimating costs across time. The total cost has been estimated to be about 32 million Indian rupees, which is around 52.8 billion Indian rupees ($827 million US) based on 2015 values.

 

LATER DAYS

Abdul Hamid Lahauri in his book Badshahnama refers to Taj Mahal as rauza-i munawwara, meaning the illumined or illustrious tomb. Soon after the Taj Mahal's completion, Shah Jahan was deposed by his son Aurangzeb and put under house arrest at nearby Agra Fort. Upon Shah Jahan's death, Aurangzeb buried him in the mausoleum next to his wife. In the 18th century, the Jat rulers of Bharatpur invaded Agra and attacked the Taj Mahal, the two chandeliers, one of agate and another of silver, which were hung over the main cenotaph, were taken away by them, along with the gold and silver screen. Kanbo, a Mughal historian, said the gold shield which covered the 15-foot high finial at the top of the main dome was also removed during the Jat despoliation.

 

By the late 19th century, parts of the buildings had fallen into disrepair. During the time of the Indian rebellion of 1857, the Taj Mahal was defaced by British soldiers and government officials, who chiselled out precious stones and lapis lazuli from its walls. At the end of the 19th century, British viceroy Lord Curzon ordered a sweeping restoration project, which was completed in 1908. He also commissioned the large lamp in the interior chamber, modelled after one in a Cairo mosque. During this time the garden was remodelled with British-style lawns that are still in place today.

 

THREATS

In 1942, the government erected a scaffolding to disguise the building in anticipation of air attacks by the Japanese Air Force. During the India-Pakistan wars of 1965 and 1971, scaffoldings were again erected to mislead bomber pilots.

 

More recent threats have come from environmental pollution on the banks of Yamuna River including acid rain due to the Mathura Oil Refinery, which was opposed by Supreme Court of India directives. The pollution has been turning the Taj Mahal yellow. To help control the pollution, the Indian government has set up the Taj Trapezium Zone (TTZ), a 10,400-square-kilometre area around the monument where strict emissions standards are in place.

 

Concerns for the tomb's structural integrity have recently been raised because of a decline in the groundwater level in the Yamuna river basin which is falling at a rate of around 5 feet a year. In 2010, cracks appeared in parts of the tomb, and the minarets which surround the monument were showing signs of tilting, as the wooden foundation of the tomb may be rotting due to lack of water. In 2011 it was reported that some predictions indicated that the tomb could collapse within 5 years.

 

TOURISM

The Taj Mahal attracts a large number of tourists. UNESCO documented more than 2 million visitors in 2001, which increased to about 3 million in 2015. A two tier pricing system is in place, with a significantly lower entrance fee for Indian citizens and a more expensive one for foreigners. Most tourists visit in the cooler months of October, November and February. Polluting traffic is not allowed near the complex and tourists must either walk from parking lots or catch an electric bus. The Khawasspuras (northern courtyards) are currently being restored for use as a new visitor center.

 

The small town to the south of the Taj, known as Taj Ganji or Mumtazabad, was originally constructed with caravanserais, bazaars and markets to serve the needs of visitors and workmen. Lists of recommended travel destinations often feature the Taj Mahal, which also appears in several listings of seven wonders of the modern world, including the recently announced New Seven Wonders of the World, a recent poll with 100 million votes.

 

The grounds are open from 06:00 to 19:00 weekdays, except for Friday when the complex is open for prayers at the mosque between 12:00 and 14:00. The complex is open for night viewing on the day of the full moon and two days before and after, excluding Fridays and the month of Ramadan. For security reasons only five items - water in transparent bottles, small video cameras, still cameras, mobile phones and small ladies' purses - are allowed inside the Taj Mahal.

 

MYTHS

Ever since its construction, the building has been the source of an admiration transcending culture and geography, and so personal and emotional responses have consistently eclipsed scholastic appraisals of the monument. A longstanding myth holds that Shah Jahan planned a mausoleum to be built in black marble as a Black Taj Mahal across the Yamuna river. The idea originates from fanciful writings of Jean-Baptiste Tavernier, a European traveller who visited Agra in 1665. It was suggested that Shah Jahan was overthrown by his son Aurangzeb before it could be built. Ruins of blackened marble across the river in Moonlight Garden, Mahtab Bagh, seemed to support this legend. However, excavations carried out in the 1990s found that they were discolored white stones that had turned black. A more credible theory for the origins of the black mausoleum was demonstrated in 2006 by archaeologists who reconstructed part of the pool in the Moonlight Garden. A dark reflection of the white mausoleum could clearly be seen, befitting Shah Jahan's obsession with symmetry and the positioning of the pool itself.

 

No evidence exists for claims that describe, often in horrific detail, the deaths, dismemberments and mutilations which Shah Jahan supposedly inflicted on various architects and craftsmen associated with the tomb. Some stories claim that those involved in construction signed contracts committing themselves to have no part in any similar design. Similar claims are made for many famous buildings. No evidence exists for claims that Lord William Bentinck, governor-general of India in the 1830s, supposedly planned to demolish the Taj Mahal and auction off the marble. Bentinck's biographer John Rosselli says that the story arose from Bentinck's fund-raising sale of discarded marble from Agra Fort.

 

Another myth suggests that beating the silhouette of the finial will cause water to come forth. To this day, officials find broken bangles surrounding the silhouette.

 

In 2000, India's Supreme Court dismissed P. N. Oak's petition to declare that a Hindu king built the Taj Mahal. In 2005 a similar petition was dismissed by the Allahabad High Court. This case was brought by Amar Nath Mishra, a social worker and preacher who says that the Taj Mahal was built by the Hindu King Parmar Dev in 1196.

 

WIKIPEDIA

For an upcoming SuperCar. The front steering hub has positive caster, Kingpin Inclination, though still a positive scrub radius, Ackerman geometry, and decreasing caster as the suspension travels. It needs a little more refinement, but the basics are there.

The Taj Mahal (/ˌtɑːdʒ məˈhɑːl/, more often /ˈtɑːʒ/; from Persian and Arabic, "crown of palaces", pronounced [ˈt̪aːdʒ mɛˈɦɛl]) is a white marble mausoleum located on the southern bank of Yamuna River in the Indian city of Agra. It was commissioned in 1632 by the Mughal emperor Shah Jahan (reigned 1628–1658) to house the tomb of his favorite wife of three, Mumtaz Mahal.

 

Construction of the mausoleum was essentially completed in 1643 but work continued on other phases of the project for an additional ten years. The Taj Mahal complex is believed to have been completed in its entirety in 1653 at a cost estimated at the time to be around 32 million Indian rupees, which in 2015 would be valued at around 52.8 billion Indian rupees ($827 million US). The construction project employed around 20,000 artisans under the guidance of a board of architects led by Ustad Ahmad Lahauri. The domed marble tomb is part of an integrated complex consisting of gardens and two red-sandstone buildings surrounded by a crenellated wall on three sides.

 

The Taj Mahal is regarded by many as the best example of Mughal architecture and is widely recognized as "the jewel of Muslim art in India". It is one of the world’s most celebrated structures and a symbol of India’s rich history. Designated a UNESCO World Heritage Site in 1983, the Taj Mahal attracts some 3 million visitors a year.

 

INSPIRATION

In 1631, Shah Jahan, emperor during the Mughal empire's period of greatest prosperity, was grief-stricken when his favorite of three wives and beloved companion, Mumtaz Mahal, a Persian princess, died during the birth of their 14th child, Gauhara Begum. Construction of the Taj Mahal began in 1632. The court chronicles of Shah Jahan's grief illustrate the love story traditionally held as an inspiration for Taj Mahal. The principal mausoleum was completed in 1643 and the surrounding buildings and garden were finished about five years later.

 

ARCHITECTURE AND DESIGN

The Taj Mahal incorporates and expands on design traditions of Persian and earlier Mughal architecture. Specific inspiration came from successful Timurid and Mughal buildings including; the Gur-e Amir (the tomb of Timur, progenitor of the Mughal dynasty, in Samarkand), Humayun's Tomb, Itmad-Ud-Daulah's Tomb (sometimes called the Baby Taj), and Shah Jahan's own Jama Masjid in Delhi. While earlier Mughal buildings were primarily constructed of red sandstone, Shah Jahan promoted the use of white marble inlaid with semi-precious stones. Buildings under his patronage reached new levels of refinement.

 

TOMB

The tomb is the central focus of the entire complex of the Taj Mahal. It is a large, white marble structure standing on a square plinth and consists of a symmetrical building with an iwan (an arch-shaped doorway) topped by a large dome and finial. Like most Mughal tombs, the basic elements are Persian in origin.

 

The base structure is a large multi-chambered cube with chamfered corners forming an unequal eight-sided structure that is approximately 55 metres on each of the four long sides. Each side of the iwan is framed with a huge pishtaq or vaulted archway with two similarly shaped arched balconies stacked on either side. This motif of stacked pishtaqs is replicated on the chamfered corner areas, making the design completely symmetrical on all sides of the building. Four minarets frame the tomb, one at each corner of the plinth facing the chamfered corners. The main chamber houses the false sarcophagi of Mumtaz Mahal and Shah Jahan; the actual graves are at a lower level.

 

The most spectacular feature is the marble dome that surmounts the tomb. The dome is nearly 35 metres high which is close in measurement to the length of the base, and accentuated by the cylindrical "drum" it sits on which is approximately 7 metres high. Because of its shape, the dome is often called an onion dome or amrud (guava dome). The top is decorated with a lotus design which also serves to accentuate its height. The shape of the dome is emphasized by four smaller domed chattris (kiosks) placed at its corners, which replicate the onion shape of the main dome. Their columned bases open through the roof of the tomb and provide light to the interior. Tall decorative spires (guldastas) extend from edges of base walls, and provide visual emphasis to the height of the dome. The lotus motif is repeated on both the chattris and guldastas. The dome and chattris are topped by a gilded finial which mixes traditional Persian and Hindustani decorative elements.

 

The main finial was originally made of gold but was replaced by a copy made of gilded bronze in the early 19th century. This feature provides a clear example of integration of traditional Persian and Hindu decorative elements. The finial is topped by a moon, a typical Islamic motif whose horns point heavenward.

 

The minarets, which are each more than 40 metres tall, display the designer's penchant for symmetry. They were designed as working minarets - a traditional element of mosques, used by the muezzin to call the Islamic faithful to prayer. Each minaret is effectively divided into three equal parts by two working balconies that ring the tower. At the top of the tower is a final balcony surmounted by a chattri that mirrors the design of those on the tomb. The chattris all share the same decorative elements of a lotus design topped by a gilded finial. The minarets were constructed slightly outside of the plinth so that in the event of collapse, a typical occurrence with many tall constructions of the period, the material from the towers would tend to fall away from the tomb.

 

EXTERIOR DECORATIONS

The exterior decorations of the Taj Mahal are among the finest in Mughal architecture. As the surface area changes, the decorations are refined proportionally. The decorative elements were created by applying paint, stucco, stone inlays or carvings. In line with the Islamic prohibition against the use of anthropomorphic forms, the decorative elements can be grouped into either calligraphy, abstract forms or vegetative motifs. Throughout the complex are passages from the Qur'an that comprise some of the decorative elements. Recent scholarship suggests that the passages were chosen by Amanat Khan.

 

The calligraphy on the Great Gate reads "O Soul, thou art at rest. Return to the Lord at peace with Him, and He at peace with you." The calligraphy was created in 1609 by a calligrapher named Abdul Haq. Shah Jahan conferred the title of "Amanat Khan" upon him as a reward for his "dazzling virtuosity". Near the lines from the Qur'an at the base of the interior dome is the inscription, "Written by the insignificant being, Amanat Khan Shirazi." Much of the calligraphy is composed of florid thuluth script made of jasper or black marble inlaid in white marble panels. Higher panels are written in slightly larger script to reduce the skewing effect when viewed from below. The calligraphy found on the marble cenotaphs in the tomb is particularly detailed and delicate.

 

Abstract forms are used throughout, especially in the plinth, minarets, gateway, mosque, jawab and, to a lesser extent, on the surfaces of the tomb. The domes and vaults of the sandstone buildings are worked with tracery of incised painting to create elaborate geometric forms. Herringbone inlays define the space between many of the adjoining elements. White inlays are used in sandstone buildings, and dark or black inlays on the white marbles. Mortared areas of the marble buildings have been stained or painted in a contrasting color which creates a complex array of geometric patterns. Floors and walkways use contrasting tiles or blocks in tessellation patterns.

 

On the lower walls of the tomb are white marble dados sculpted with realistic bas relief depictions of flowers and vines. The marble has been polished to emphasise the exquisite detailing of the carvings. The dado frames and archway spandrels have been decorated with pietra dura inlays of highly stylised, almost geometric vines, flowers and fruits. The inlay stones are of yellow marble, jasper and jade, polished and levelled to the surface of the walls.

 

INTERIOR DECORATION

The interior chamber of the Taj Mahal reaches far beyond traditional decorative elements. The inlay work is not pietra dura, but a lapidary of precious and semiprecious gemstones. The inner chamber is an octagon with the design allowing for entry from each face, although only the door facing the garden to the south is used. The interior walls are about 25 metres high and are topped by a "false" interior dome decorated with a sun motif. Eight pishtaq arches define the space at ground level and, as with the exterior, each lower pishtaq is crowned by a second pishtaq about midway up the wall. The four central upper arches form balconies or viewing areas, and each balcony's exterior window has an intricate screen or jali cut from marble. In addition to the light from the balcony screens, light enters through roof openings covered by chattris at the corners. The octagonal marble screen or jali bordering the cenotaphs is made from eight marble panels carved through with intricate pierce work. The remaining surfaces are inlaid in delicate detail with semi-precious stones forming twining vines, fruits and flowers. Each chamber wall is highly decorated with dado bas-relief, intricate lapidary inlay and refined calligraphy panels which reflect, in miniature detail, the design elements seen throughout the exterior of the complex.

 

Muslim tradition forbids elaborate decoration of graves. Hence, the bodies of Mumtaz and Shah Jahan were put in a relatively plain crypt beneath the inner chamber with their faces turned right, towards Mecca. Mumtaz Mahal's cenotaph is placed at the precise centre of the inner chamber on a rectangular marble base of 1.5 by 2.5 metres. Both the base and casket are elaborately inlaid with precious and semiprecious gems. Calligraphic inscriptions on the casket identify and praise Mumtaz. On the lid of the casket is a raised rectangular lozenge meant to suggest a writing tablet. Shah Jahan's cenotaph is beside Mumtaz's to the western side, and is the only visible asymmetric element in the entire complex. His cenotaph is bigger than his wife's, but reflects the same elements: a larger casket on a slightly taller base precisely decorated with lapidary and calligraphy that identifies him. On the lid of the casket is a traditional sculpture of a small pen box.

 

The pen box and writing tablet are traditional Mughal funerary icons decorating the caskets of men and women respectively. The Ninety Nine Names of God are calligraphic inscriptions on the sides of the actual tomb of Mumtaz Mahal. Other inscriptions inside the crypt include, "O Noble, O Magnificent, O Majestic, O Unique, O Eternal, O Glorious... ". The tomb of Shah Jahan bears a calligraphic inscription that reads; "He travelled from this world to the banquet-hall of Eternity on the night of the twenty-sixth of the month of Rajab, in the year 1076 Hijri."

 

GARDEN

The complex is set around a large 300-metre square charbagh or Mughal garden. The garden uses raised pathways that divide each of the four quarters of the garden into 16 sunken parterres or flowerbeds. Halfway between the tomb and gateway in the center of the garden is a raised marble water tank with a reflecting pool positioned on a north-south axis to reflect the image of the mausoleum. The raised marble water tank is called al Hawd al-Kawthar in reference to the "Tank of Abundance" promised to Muhammad.

 

Elsewhere, the garden is laid out with avenues of trees and fountains. The charbagh garden, a design inspired by Persian gardens, was introduced to India by Babur, the first Mughal emperor. It symbolises the four flowing rivers of Jannah (Paradise) and reflects the Paradise garden derived from the Persian paridaeza, meaning 'walled garden'. In mystic Islamic texts of the Mughal period, Paradise is described as an ideal garden of abundance with four rivers flowing from a central spring or mountain, separating the garden into north, west, south and east.

 

Most Mughal charbaghs are rectangular with a tomb or pavilion in the center. The Taj Mahal garden is unusual in that the main element, the tomb, is located at the end of the garden. With the discovery of Mahtab Bagh or "Moonlight Garden" on the other side of the Yamuna, the interpretation of the Archaeological Survey of India is that the Yamuna river itself was incorporated into the garden's design and was meant to be seen as one of the rivers of Paradise. Similarities in layout and architectural features with the Shalimar Gardens suggests both gardens may have been designed by the same architect, Ali Mardan. Early accounts of the garden describe its profusion of vegetation, including abundant roses, daffodils, and fruit trees. As the Mughal Empire declined, the Taj Mahal and its gardens also declined. By the end of the 19th century, the British Empire controlled more than three-fifths of India, and assumed management of the Taj Mahal. They changed the landscaping to their liking which more closely resembled the formal lawns of London.

 

OUTLYING BUILDINGS

The Taj Mahal complex is bordered on three sides by crenellated red sandstone walls; the side facing the river is open. Outside the walls are several additional mausoleums, including those of Shah Jahan's other wives, and a larger tomb for Mumtaz's favourite servant.

 

The main gateway (darwaza) is a monumental structure built primarily of marble, and reminiscent of the Mughal architecture of earlier emperors. Its archways mirror the shape of the tomb's archways, and its pishtaq arches incorporate the calligraphy that decorates the tomb. The vaulted ceilings and walls have elaborate geometric designs like those found in the other sandstone buildings in the complex.

 

At the far end of the complex are two grand red sandstone buildings that mirror each other, and face the sides of the tomb. The backs of the buildings parallel the western and eastern walls. The western building is a mosque and the other is the jawab (answer), thought to have been constructed for architectural balance although it may have been used as a guesthouse. Distinctions between the two buildings include the jawab's lack of a mihrab (a niche in a mosque's wall facing Mecca), and its floors of geometric design whereas the floor of the mosque is laid with outlines of 569 prayer rugs in black marble. The mosque's basic design of a long hall surmounted by three domes is similar to others built by Shah Jahan, particularly the Masjid-i Jahān-Numā, or Jama Masjid, Delhi. The Mughal mosques of this period divide the sanctuary hall into three areas comprising a main sanctuary and slightly smaller sanctuaries on either side. At the Taj Mahal, each sanctuary opens onto an expansive vaulting dome. The outlying buildings were completed in 1643.

 

CONSTRUCTION

The Taj Mahal is built on a parcel of land to the south of the walled city of Agra. Shah Jahan presented Maharajah Jai Singh with a large palace in the center of Agra in exchange for the land. An area of roughly three acres was excavated, filled with dirt to reduce seepage, and leveled at 50 metres above riverbank. In the tomb area, wells were dug and filled with stone and rubble to form the footings of the tomb. Instead of lashed bamboo, workmen constructed a colossal brick scaffold that mirrored the tomb. The scaffold was so enormous that foremen estimated it would take years to dismantle.

 

The Taj Mahal was constructed using materials from all over India and Asia. It is believed over 1,000 elephants were used to transport building materials. The translucent white marble was brought from Makrana, Rajasthan, the jasper from Punjab, jade and crystal from China. The turquoise was from Tibet and the Lapis lazuli from Afghanistan, while the sapphire came from Sri Lanka and the carnelian from Arabia. In all, twenty eight types of precious and semi-precious stones were inlaid into the white marble.

 

According to the legend, Shah Jahan decreed that anyone could keep the bricks taken from the scaffold, and thus it was dismantled by peasants overnight. A fifteen kilometer tamped-earth ramp was built to transport marble and materials to the construction site and teams of twenty or thirty oxen pulled the blocks on specially constructed wagons. An elaborate post-and-beam pulley system was used to raise the blocks into desired position. Water was drawn from the river by a series of purs, an animal-powered rope and bucket mechanism, into a large storage tank and raised to a large distribution tank. It was passed into three subsidiary tanks, from which it was piped to the complex.

 

The plinth and tomb took roughly 12 years to complete. The remaining parts of the complex took an additional 10 years and were completed in order of minarets, mosque and jawab, and gateway. Since the complex was built in stages, discrepancies exist in completion dates due to differing opinions on "completion". Construction of the mausoleum itself was essentially completed by 1643 while work continued on the outlying buildings. Estimates of the cost of construction vary due to difficulties in estimating costs across time. The total cost has been estimated to be about 32 million Indian rupees, which is around 52.8 billion Indian rupees ($827 million US) based on 2015 values.

 

LATER DAYS

Abdul Hamid Lahauri in his book Badshahnama refers to Taj Mahal as rauza-i munawwara, meaning the illumined or illustrious tomb. Soon after the Taj Mahal's completion, Shah Jahan was deposed by his son Aurangzeb and put under house arrest at nearby Agra Fort. Upon Shah Jahan's death, Aurangzeb buried him in the mausoleum next to his wife. In the 18th century, the Jat rulers of Bharatpur invaded Agra and attacked the Taj Mahal, the two chandeliers, one of agate and another of silver, which were hung over the main cenotaph, were taken away by them, along with the gold and silver screen. Kanbo, a Mughal historian, said the gold shield which covered the 15-foot high finial at the top of the main dome was also removed during the Jat despoliation.

 

By the late 19th century, parts of the buildings had fallen into disrepair. During the time of the Indian rebellion of 1857, the Taj Mahal was defaced by British soldiers and government officials, who chiselled out precious stones and lapis lazuli from its walls. At the end of the 19th century, British viceroy Lord Curzon ordered a sweeping restoration project, which was completed in 1908. He also commissioned the large lamp in the interior chamber, modelled after one in a Cairo mosque. During this time the garden was remodelled with British-style lawns that are still in place today.

 

THREATS

In 1942, the government erected a scaffolding to disguise the building in anticipation of air attacks by the Japanese Air Force. During the India-Pakistan wars of 1965 and 1971, scaffoldings were again erected to mislead bomber pilots.

 

More recent threats have come from environmental pollution on the banks of Yamuna River including acid rain due to the Mathura Oil Refinery, which was opposed by Supreme Court of India directives. The pollution has been turning the Taj Mahal yellow. To help control the pollution, the Indian government has set up the Taj Trapezium Zone (TTZ), a 10,400-square-kilometre area around the monument where strict emissions standards are in place.

 

Concerns for the tomb's structural integrity have recently been raised because of a decline in the groundwater level in the Yamuna river basin which is falling at a rate of around 5 feet a year. In 2010, cracks appeared in parts of the tomb, and the minarets which surround the monument were showing signs of tilting, as the wooden foundation of the tomb may be rotting due to lack of water. In 2011 it was reported that some predictions indicated that the tomb could collapse within 5 years.

 

TOURISM

The Taj Mahal attracts a large number of tourists. UNESCO documented more than 2 million visitors in 2001, which increased to about 3 million in 2015. A two tier pricing system is in place, with a significantly lower entrance fee for Indian citizens and a more expensive one for foreigners. Most tourists visit in the cooler months of October, November and February. Polluting traffic is not allowed near the complex and tourists must either walk from parking lots or catch an electric bus. The Khawasspuras (northern courtyards) are currently being restored for use as a new visitor center.

 

The small town to the south of the Taj, known as Taj Ganji or Mumtazabad, was originally constructed with caravanserais, bazaars and markets to serve the needs of visitors and workmen. Lists of recommended travel destinations often feature the Taj Mahal, which also appears in several listings of seven wonders of the modern world, including the recently announced New Seven Wonders of the World, a recent poll with 100 million votes.

 

The grounds are open from 06:00 to 19:00 weekdays, except for Friday when the complex is open for prayers at the mosque between 12:00 and 14:00. The complex is open for night viewing on the day of the full moon and two days before and after, excluding Fridays and the month of Ramadan. For security reasons only five items - water in transparent bottles, small video cameras, still cameras, mobile phones and small ladies' purses - are allowed inside the Taj Mahal.

 

MYTHS

Ever since its construction, the building has been the source of an admiration transcending culture and geography, and so personal and emotional responses have consistently eclipsed scholastic appraisals of the monument. A longstanding myth holds that Shah Jahan planned a mausoleum to be built in black marble as a Black Taj Mahal across the Yamuna river. The idea originates from fanciful writings of Jean-Baptiste Tavernier, a European traveller who visited Agra in 1665. It was suggested that Shah Jahan was overthrown by his son Aurangzeb before it could be built. Ruins of blackened marble across the river in Moonlight Garden, Mahtab Bagh, seemed to support this legend. However, excavations carried out in the 1990s found that they were discolored white stones that had turned black. A more credible theory for the origins of the black mausoleum was demonstrated in 2006 by archaeologists who reconstructed part of the pool in the Moonlight Garden. A dark reflection of the white mausoleum could clearly be seen, befitting Shah Jahan's obsession with symmetry and the positioning of the pool itself.

 

No evidence exists for claims that describe, often in horrific detail, the deaths, dismemberments and mutilations which Shah Jahan supposedly inflicted on various architects and craftsmen associated with the tomb. Some stories claim that those involved in construction signed contracts committing themselves to have no part in any similar design. Similar claims are made for many famous buildings. No evidence exists for claims that Lord William Bentinck, governor-general of India in the 1830s, supposedly planned to demolish the Taj Mahal and auction off the marble. Bentinck's biographer John Rosselli says that the story arose from Bentinck's fund-raising sale of discarded marble from Agra Fort.

 

Another myth suggests that beating the silhouette of the finial will cause water to come forth. To this day, officials find broken bangles surrounding the silhouette.

 

In 2000, India's Supreme Court dismissed P. N. Oak's petition to declare that a Hindu king built the Taj Mahal. In 2005 a similar petition was dismissed by the Allahabad High Court. This case was brought by Amar Nath Mishra, a social worker and preacher who says that the Taj Mahal was built by the Hindu King Parmar Dev in 1196.

 

WIKIPEDIA

The Porsche 928 is a 2+2 Gran Turismo sold from 1978 to 1995.

Originally intended to replace the company's iconic 911, the 928 attempted to combine the power, poise, and handling of a sports car with the refinement, comfort, and equipment of a luxury sedan to create what some Porsche executives thought would be a vehicle with wider appeal than the compact, quirky and sometimes difficult 911.

 

The body, styled by Wolfgang Möbius under guidance of Anatole Lapine, was mainly galvanized steel, but the doors, front fenders, hood, and roof were aluminum in order to make the car more lightweight. It had a substantial luggage area accessed via a large hatchback. The new polyurethane elastic bumpers were integrated into the nose and tail and covered in body-coloured plastic; an unusual feature for the time that aided the car visually and reduced its drag.

 

The car has the distinction of being the company's first coupe powered by a front-mounted V8 engine, and the company's first mass-produced V8 powered model. European versions of the Porsche 928S debuted for 1980 model year with 300 PS (221 kW), and were upgraded to 310 PS (228 kW) for 1984 model year.

 

Porsche utilized a transaxle in the 928 to help achieve 50/50 front/rear weight distribution, aiding the car's balance. The 928 came with either a five-speed dog leg manual transmission, or a Mercedes-Benz-derived automatic transmission. More than half of production have the automatic transmission.During 1983 the 928S was the fastest car sold in North America, with a top speed of 146 mph (235 km/h). Incidentally, its appearance in the 1983 film Risky Business (Joel’s Party) with Tom Cruise attempted to capitalize on this fact.Porsche's design and development efforts paid off during the 1978 European Car of the Year competition, the only sports car so far to have won this competition. This is regarded as proof of how advanced the 928 was compared to its contemporaries.

( (c) de.wikipedia.org/wiki/Porsche_928#Literatur)

 

This collector's item was spotted as voiture d'occasion at the Meilenwerk in Berlin www.meilenwerk.de/Meilenwerk_Berlin_Wen_Sie_finden.php.

+++ DISCLAIMER +++

Nothing you see here is real, even though the conversion or the presented background story might be based historical facts. BEWARE!

  

Some background:

The Gloster Glaive was basically a modernized and re-engined variant of the successful, British-built Gloster Gladiator (or Gloster SS.37), the RAF’s final biplane fighter to enter service. The Gladiator was not only widely used by the RAF at the dawn of WWII and in almost every theatre of operations, but also by many other nations. Operators included Norway, Belgium, Sweden, Greece, Latvia, Lithuania or Nationalist China, and while the RAF already opted for more modern monoplanes, Gloster saw the opportunity to sell an updated Gladiator to countries which were not as progressive.

Originally designated Gladiator Mk. IV, the machine received many aerodynamic refinements and the motor was changed from a draggy radial to a liquid-cooled inline engine. The latter was the new Rolls Royce Peregrine, a development of the Kestrel. It was, in its original form, a 21-litre (1,300 cu in) liquid-cooled V-12 aero engine ), delivering 885-horsepower (660 kW). The engine was housed under a streamlined cowling, driving a three blade metal propeller, and was coupled with a ventral radiator bath, reminiscent of the Hawker Fury biplane’s arrangement.

 

Structural improvements included an all-metal monocoque fuselage and stabilizers, as well as new wings and streamlined struts with reduced bracing. The upper wing was enlarged and of all-metal construction, too, while the lower wings were reduced in span and area, almost resulting in a sesquiplane layout. The total wing area was only marginally reduced, though.

The fixed landing gear was retained, but the main wheels were now covered with spats. The pilot still sat in a fully enclosed cockpit, the armament consisted of four machine guns, similar to the Gladiator. But for the Glaive, all Browning machine guns were synchronized and mounted in the fuselage: one pair was placed on top of the cowling, in front of the cockpit. Another pair, much like the Gladiator’s arrangement was placed in the fuselage flanks, below the exhaust outlets.

 

Compared with the Gladiator, the design changes were so fundamental that Gloster eventually decided to allocate a separate designation – also with a view to the type’s foreign marketing, since a new aircraft appeared more attractive than another mark of a pre-war design. For the type’s virgin flight in late 1938 the name “Glaive” was unveiled to the public, and several smaller European air forces immediately showed interest, including Greece, Croatia, Turkey, Portugal and Egypt.

 

Greece was one of the initial customers, and the first of a total of 24 aircraft for the Hellenic Air Force was delivered in early 1939, with 24 more on order (which were never delivered, though). The initial batch arrived just in time, since tension had been building between Greece and Italy since 7 April 1939, when Italian troops occupied Albania. On 28 October 1940, Italy issued an ultimatum to Greece, which was promptly rejected. A few hours later, Italian troops launched an invasion of Greece, initiating the Greco-Italian War.

 

The Hellenic Gloster Glaives were split among three Mirae Dioxeos (Fighter Squadrons): the 21st at Trikala, 22nd at Thessaloniki and 23rd at Larissa. When Italy attacked in October 1940, the British fighter was, together with the PZL 24, the Greeks' only modern type in adequate numbers. However, by late 1940, the Gloster Glaive was already no longer a front-runner despite a powerful powerplant and satisfactory armament. It had no speed advantage over the Fiat Cr.42 nor could it outfly the nimble Italian biplane, and it was much slower than the Macchi MC.200 and the Fiat G.50 it was pitted against. Its agility was the only real advantage against the Italian fighters, whose reliance on the slow firing Breda-SAFAT 12.7mm machine guns proved detrimental.

 

Anyway, on 5 April 1941, German forces invaded Greece and quickly established air superiority. As the Allied troops retreated, British and Hellenic forces covered them, before flying to Crete during the last week of April. There, the refugee aircraft recorded a few claims over twin-engine aircraft before being evacuated to Egypt during the Battle of Crete.

 

Overall, the Glaives performed gallantly during the early period of the conflict, holding their own against impossible numerical odds and despite the fact that their main target were enemy bombers which forced them to fight at a disadvantage against enemy fighters. Italian claims of easy superiority over the Albanian front were vastly over-rated and their kill claims even exceeded the total number of operational fighters on the Greek side. Total Greek fighter losses in combat came to 24 a/c with the Greek fighter pilots claiming 64 confirmed kills and 24 probables (about two third bombers).

 

By April 1941, however, lack of spares and attrition had forced the Hellenic Air Force to merge the surviving seven Glaives with five leftover PZL.24s into one understrength squadron supported by five Gloster Gladiators Mk I & II and the two surviving MB.151s. These fought hopelessly against the Luftwaffe onslaught, and most aircraft were eventually lost on the ground. None of the Hellenic Gloster Glaives survived the conflict.

  

General characteristics:

Crew: two

Length: 8.92m (29 ft 3 in)

Wingspan: 34 ft 0 in (10.36 m)

Height: 11 ft 9 in (3.58 m)

Wing area: 317 ft² (29.4 m²)

Empty weight: 1,295 kg (2,855 lb)

Max takeoff weight: 1,700 kg (3,748 lb)

 

Powerplant:

1× Rolls Royce Peregrine II liquid-cooled V12 inline engine, rated at 940 hp (700 kw)

 

Performance:

Maximum speed: 405 km/h (252 mph; 219 kn) at 4,400 m (14,436 ft)

Cruise speed: 345 km/h (214 mph; 186 kn)

Stall speed: 60 mph (52 knots, 96 km/h)

Range: 373 mi (600 km; 324 nmi)

Endurance: 2 hours

Service ceiling: 10,600 m (34,800 ft)

Rate of climb: 2,982 ft/min (15.15 m/s)

Time to altitude: 10.000 ft (3.050 m) in 3 minutes 20 seconds

 

Armament:

4× 0.303 calibre (7.7 mm) M1919 Browning machine guns in the fuselage

Provisions for 6× 10 kg (22 lb) or 4x 20 kg (44 lb) bombs under the lower wings

  

The kit and its assembly:

The fictional Gloster Glaive started quite simple with the idea of replacing the Gladiator’s radial with an inline engine. But this soon did not appear enough for an update – the Peregrine hardly delivered much more power than the former Mercury, so I considered some structural updates, too. Most of them comprised the replacement of former fabric-covered structures, and this led conceptually to a kitbash with only some Gladiator fuselage and tail parts left.

 

The basis is (once more) the very nice Matchbox Gloster Gladiator, but it was heavily modified. As an initial step, fuselage, fin and stabilizers (all OOB parts) lost their rib-and-fabric structure, simply sanded away. A minor detail, but it changes the overall look of the aircraft a lot, making it appear much more modern.

The fuselage was left without the OOB radial, and instead a leftover Merlin front end from an Airfix Hurricane (ca. 1cm long, left over from one of my first whif builds ever, a Hurricane with a radial engine!) was added. The lines match pretty well: the side profile looks sleek, if not elegant, but the Gladiator fuselage turned out to be wider than expected. Some major body work/PSR was necessary to integrate the new nose, but the result looks very good.

 

The liquid-cooled engine necessitated a radiator somewhere on the airframe…! Since I wanted the nose to remain slim and streamlined I eventually placed the radiator bath under the fuselage, much like the arrangement of the Hawker Fury biplane. The radiator itself comes from a late Spitfire (FROG kit).

The exhaust was taken from the Hurricane kit, too, and matching slits dug into the putty nose to take them. The three blade propeller is a mash-up, too: the spinner belongs, IIRC, to an early Spitfire (left over from an AZ Models kit) while the blades came from a damaged Matchbox Brewster Buffalo.

 

The Gladiator’s fuselage flank machine guns were kept and their “bullet channels” extrapolated along the new cowling, running under the new exhaust pipes. Another pair of machine guns were placed on top of the engine – for these, openings were carved into the upper hull and small fairings (similar to the Browning guns in the flanks) added. This arrangement appeared plausible to me, since the Gladiator’s oil cooler was not necessary anymore and the new lower wings (see below) were not big enough anymore to take the Gladiator’s underwing guns. Four MGs in the fuselage appears massive – but there were other types with such an arrangement, e.g. the Avia B-534 with four guns in the flanks and an inline engine.

 

The wings are complete replacements: the upper wing comes from a Heller Curtiss SBC4, while the lower wings as well as the spats (on shortened OOB Gladiator struts) come from an ICM Polikarpov I-153. All struts were scratched. Once the lower wings were in place and the relative position of the upper wing clear, the outer struts were carved from 1mm styrene sheet, using the I-153 design as benchmark. These were glued to the lower wing first, and, once totally dry after 24h, the upper wing was simply glued onto the top and the wing position adjusted. This was left to dry another 24h, and as a final step the four struts above the cowling (using the OOB struts, but as single parts and trimmed for proper fit) were placed. This way, a stable connection is guaranteed – and the result is surprisingly sturdy.

 

Rigging was done with heated sprue material – my personal favorite for this delicate task, and executed before painting the kit started so that the glue could cure and bond well.

  

Painting and markings:

The reason why this aircraft ended in Greek service is a color photograph of a crashed Hellenic Bloch M.B. 152 (coded ‘D 177’, to be specific). I guess that the picture was post-colored, though, because the aircraft of French origin sports rather weird colors: the picture shows a two-tone scheme in a deep, rather reddish chestnut brown and a light green that almost looks like teal. Unique, to say the least... Underside colors couldn’t be identified with certainty in the picture, but appeared like a pale but not too light blue grey.

 

Anyway, I assume that these colors are pure fiction and exaggerated Photoshop work, since the few M.B. 152s delivered to Greece carried AFAIK standard French camouflage (in French Khaki, Chestnut Brown and Blue-Grey on the upper surfaces, and a very light blue-grey from below). I’d assume that the contrast between the grey and green tones was not very obvious in the original photograph, so that the artist, not familiar with WWII paint schemes, replaced both colors with the strange teal tone and massively overmodulated the brown.

 

As weird as it looked, I liked this design and used it as an inspirational benchmark for my Hellenic Glaive build. After all, it’s a fictional aircraft… Upper basic colors are Humbrol 31 (RAF Slate Grey) and 160 (German Camouflage Red Brown), while the undersides became French Dark Blue Grey (ModelMaster Authentics 2105). The result looks rather odd…

Representing a combat-worn aircraft, I applied a thorough black ink wash and did heavier panel shading and dry-brushing on the leading edges, along with some visible touches of aluminum.

 

The Hellenic roundels come from a TL Modellbau aftermarket sheet. The tactical code was puzzled together from single letters, and the Greek “D” was created from single decal strips. For better contrast I used white decals – most Hellenic aircraft of the time had black codes, but the contrast is much better, and I found evidence that some machines actually carried white codes. The small fin flash is another free interpretation. Not every Hellenic aircraft carried these markings, and instead of painting the whole rudder in Greek colors I just applied a small fin flash. This was created with white and blue decal strips, closely matching the roundels’ colors.

 

Finally, after some soot stains around the guns and the exhausts, the kit was sealed with matt acrylic varnish.

  

Modified beyond recognition, perhaps…? The fictional Gloster Glaive looks IMHO good and very modern, just like one of those final biplane designs that were about to be outrun by monoplanes at the brink of WWII.

 

The Taj Mahal (/ˌtɑːdʒ məˈhɑːl/, more often /ˈtɑːʒ/; from Persian and Arabic, "crown of palaces", pronounced [ˈt̪aːdʒ mɛˈɦɛl]) is a white marble mausoleum located on the southern bank of Yamuna River in the Indian city of Agra. It was commissioned in 1632 by the Mughal emperor Shah Jahan (reigned 1628–1658) to house the tomb of his favorite wife of three, Mumtaz Mahal.

 

Construction of the mausoleum was essentially completed in 1643 but work continued on other phases of the project for an additional ten years. The Taj Mahal complex is believed to have been completed in its entirety in 1653 at a cost estimated at the time to be around 32 million Indian rupees, which in 2015 would be valued at around 52.8 billion Indian rupees ($827 million US). The construction project employed around 20,000 artisans under the guidance of a board of architects led by Ustad Ahmad Lahauri. The domed marble tomb is part of an integrated complex consisting of gardens and two red-sandstone buildings surrounded by a crenellated wall on three sides.

 

The Taj Mahal is regarded by many as the best example of Mughal architecture and is widely recognized as "the jewel of Muslim art in India". It is one of the world’s most celebrated structures and a symbol of India’s rich history. Designated a UNESCO World Heritage Site in 1983, the Taj Mahal attracts some 3 million visitors a year.

 

INSPIRATION

In 1631, Shah Jahan, emperor during the Mughal empire's period of greatest prosperity, was grief-stricken when his favorite of three wives and beloved companion, Mumtaz Mahal, a Persian princess, died during the birth of their 14th child, Gauhara Begum. Construction of the Taj Mahal began in 1632. The court chronicles of Shah Jahan's grief illustrate the love story traditionally held as an inspiration for Taj Mahal. The principal mausoleum was completed in 1643 and the surrounding buildings and garden were finished about five years later.

 

ARCHITECTURE AND DESIGN

The Taj Mahal incorporates and expands on design traditions of Persian and earlier Mughal architecture. Specific inspiration came from successful Timurid and Mughal buildings including; the Gur-e Amir (the tomb of Timur, progenitor of the Mughal dynasty, in Samarkand), Humayun's Tomb, Itmad-Ud-Daulah's Tomb (sometimes called the Baby Taj), and Shah Jahan's own Jama Masjid in Delhi. While earlier Mughal buildings were primarily constructed of red sandstone, Shah Jahan promoted the use of white marble inlaid with semi-precious stones. Buildings under his patronage reached new levels of refinement.

 

TOMB

The tomb is the central focus of the entire complex of the Taj Mahal. It is a large, white marble structure standing on a square plinth and consists of a symmetrical building with an iwan (an arch-shaped doorway) topped by a large dome and finial. Like most Mughal tombs, the basic elements are Persian in origin.

 

The base structure is a large multi-chambered cube with chamfered corners forming an unequal eight-sided structure that is approximately 55 metres on each of the four long sides. Each side of the iwan is framed with a huge pishtaq or vaulted archway with two similarly shaped arched balconies stacked on either side. This motif of stacked pishtaqs is replicated on the chamfered corner areas, making the design completely symmetrical on all sides of the building. Four minarets frame the tomb, one at each corner of the plinth facing the chamfered corners. The main chamber houses the false sarcophagi of Mumtaz Mahal and Shah Jahan; the actual graves are at a lower level.

 

The most spectacular feature is the marble dome that surmounts the tomb. The dome is nearly 35 metres high which is close in measurement to the length of the base, and accentuated by the cylindrical "drum" it sits on which is approximately 7 metres high. Because of its shape, the dome is often called an onion dome or amrud (guava dome). The top is decorated with a lotus design which also serves to accentuate its height. The shape of the dome is emphasized by four smaller domed chattris (kiosks) placed at its corners, which replicate the onion shape of the main dome. Their columned bases open through the roof of the tomb and provide light to the interior. Tall decorative spires (guldastas) extend from edges of base walls, and provide visual emphasis to the height of the dome. The lotus motif is repeated on both the chattris and guldastas. The dome and chattris are topped by a gilded finial which mixes traditional Persian and Hindustani decorative elements.

 

The main finial was originally made of gold but was replaced by a copy made of gilded bronze in the early 19th century. This feature provides a clear example of integration of traditional Persian and Hindu decorative elements. The finial is topped by a moon, a typical Islamic motif whose horns point heavenward.

 

The minarets, which are each more than 40 metres tall, display the designer's penchant for symmetry. They were designed as working minarets - a traditional element of mosques, used by the muezzin to call the Islamic faithful to prayer. Each minaret is effectively divided into three equal parts by two working balconies that ring the tower. At the top of the tower is a final balcony surmounted by a chattri that mirrors the design of those on the tomb. The chattris all share the same decorative elements of a lotus design topped by a gilded finial. The minarets were constructed slightly outside of the plinth so that in the event of collapse, a typical occurrence with many tall constructions of the period, the material from the towers would tend to fall away from the tomb.

 

EXTERIOR DECORATIONS

The exterior decorations of the Taj Mahal are among the finest in Mughal architecture. As the surface area changes, the decorations are refined proportionally. The decorative elements were created by applying paint, stucco, stone inlays or carvings. In line with the Islamic prohibition against the use of anthropomorphic forms, the decorative elements can be grouped into either calligraphy, abstract forms or vegetative motifs. Throughout the complex are passages from the Qur'an that comprise some of the decorative elements. Recent scholarship suggests that the passages were chosen by Amanat Khan.

 

The calligraphy on the Great Gate reads "O Soul, thou art at rest. Return to the Lord at peace with Him, and He at peace with you." The calligraphy was created in 1609 by a calligrapher named Abdul Haq. Shah Jahan conferred the title of "Amanat Khan" upon him as a reward for his "dazzling virtuosity". Near the lines from the Qur'an at the base of the interior dome is the inscription, "Written by the insignificant being, Amanat Khan Shirazi." Much of the calligraphy is composed of florid thuluth script made of jasper or black marble inlaid in white marble panels. Higher panels are written in slightly larger script to reduce the skewing effect when viewed from below. The calligraphy found on the marble cenotaphs in the tomb is particularly detailed and delicate.

 

Abstract forms are used throughout, especially in the plinth, minarets, gateway, mosque, jawab and, to a lesser extent, on the surfaces of the tomb. The domes and vaults of the sandstone buildings are worked with tracery of incised painting to create elaborate geometric forms. Herringbone inlays define the space between many of the adjoining elements. White inlays are used in sandstone buildings, and dark or black inlays on the white marbles. Mortared areas of the marble buildings have been stained or painted in a contrasting color which creates a complex array of geometric patterns. Floors and walkways use contrasting tiles or blocks in tessellation patterns.

 

On the lower walls of the tomb are white marble dados sculpted with realistic bas relief depictions of flowers and vines. The marble has been polished to emphasise the exquisite detailing of the carvings. The dado frames and archway spandrels have been decorated with pietra dura inlays of highly stylised, almost geometric vines, flowers and fruits. The inlay stones are of yellow marble, jasper and jade, polished and levelled to the surface of the walls.

 

INTERIOR DECORATION

The interior chamber of the Taj Mahal reaches far beyond traditional decorative elements. The inlay work is not pietra dura, but a lapidary of precious and semiprecious gemstones. The inner chamber is an octagon with the design allowing for entry from each face, although only the door facing the garden to the south is used. The interior walls are about 25 metres high and are topped by a "false" interior dome decorated with a sun motif. Eight pishtaq arches define the space at ground level and, as with the exterior, each lower pishtaq is crowned by a second pishtaq about midway up the wall. The four central upper arches form balconies or viewing areas, and each balcony's exterior window has an intricate screen or jali cut from marble. In addition to the light from the balcony screens, light enters through roof openings covered by chattris at the corners. The octagonal marble screen or jali bordering the cenotaphs is made from eight marble panels carved through with intricate pierce work. The remaining surfaces are inlaid in delicate detail with semi-precious stones forming twining vines, fruits and flowers. Each chamber wall is highly decorated with dado bas-relief, intricate lapidary inlay and refined calligraphy panels which reflect, in miniature detail, the design elements seen throughout the exterior of the complex.

 

Muslim tradition forbids elaborate decoration of graves. Hence, the bodies of Mumtaz and Shah Jahan were put in a relatively plain crypt beneath the inner chamber with their faces turned right, towards Mecca. Mumtaz Mahal's cenotaph is placed at the precise centre of the inner chamber on a rectangular marble base of 1.5 by 2.5 metres. Both the base and casket are elaborately inlaid with precious and semiprecious gems. Calligraphic inscriptions on the casket identify and praise Mumtaz. On the lid of the casket is a raised rectangular lozenge meant to suggest a writing tablet. Shah Jahan's cenotaph is beside Mumtaz's to the western side, and is the only visible asymmetric element in the entire complex. His cenotaph is bigger than his wife's, but reflects the same elements: a larger casket on a slightly taller base precisely decorated with lapidary and calligraphy that identifies him. On the lid of the casket is a traditional sculpture of a small pen box.

 

The pen box and writing tablet are traditional Mughal funerary icons decorating the caskets of men and women respectively. The Ninety Nine Names of God are calligraphic inscriptions on the sides of the actual tomb of Mumtaz Mahal. Other inscriptions inside the crypt include, "O Noble, O Magnificent, O Majestic, O Unique, O Eternal, O Glorious... ". The tomb of Shah Jahan bears a calligraphic inscription that reads; "He travelled from this world to the banquet-hall of Eternity on the night of the twenty-sixth of the month of Rajab, in the year 1076 Hijri."

 

GARDEN

The complex is set around a large 300-metre square charbagh or Mughal garden. The garden uses raised pathways that divide each of the four quarters of the garden into 16 sunken parterres or flowerbeds. Halfway between the tomb and gateway in the center of the garden is a raised marble water tank with a reflecting pool positioned on a north-south axis to reflect the image of the mausoleum. The raised marble water tank is called al Hawd al-Kawthar in reference to the "Tank of Abundance" promised to Muhammad.

 

Elsewhere, the garden is laid out with avenues of trees and fountains. The charbagh garden, a design inspired by Persian gardens, was introduced to India by Babur, the first Mughal emperor. It symbolises the four flowing rivers of Jannah (Paradise) and reflects the Paradise garden derived from the Persian paridaeza, meaning 'walled garden'. In mystic Islamic texts of the Mughal period, Paradise is described as an ideal garden of abundance with four rivers flowing from a central spring or mountain, separating the garden into north, west, south and east.

 

Most Mughal charbaghs are rectangular with a tomb or pavilion in the center. The Taj Mahal garden is unusual in that the main element, the tomb, is located at the end of the garden. With the discovery of Mahtab Bagh or "Moonlight Garden" on the other side of the Yamuna, the interpretation of the Archaeological Survey of India is that the Yamuna river itself was incorporated into the garden's design and was meant to be seen as one of the rivers of Paradise. Similarities in layout and architectural features with the Shalimar Gardens suggests both gardens may have been designed by the same architect, Ali Mardan. Early accounts of the garden describe its profusion of vegetation, including abundant roses, daffodils, and fruit trees. As the Mughal Empire declined, the Taj Mahal and its gardens also declined. By the end of the 19th century, the British Empire controlled more than three-fifths of India, and assumed management of the Taj Mahal. They changed the landscaping to their liking which more closely resembled the formal lawns of London.

 

OUTLYING BUILDINGS

The Taj Mahal complex is bordered on three sides by crenellated red sandstone walls; the side facing the river is open. Outside the walls are several additional mausoleums, including those of Shah Jahan's other wives, and a larger tomb for Mumtaz's favourite servant.

 

The main gateway (darwaza) is a monumental structure built primarily of marble, and reminiscent of the Mughal architecture of earlier emperors. Its archways mirror the shape of the tomb's archways, and its pishtaq arches incorporate the calligraphy that decorates the tomb. The vaulted ceilings and walls have elaborate geometric designs like those found in the other sandstone buildings in the complex.

 

At the far end of the complex are two grand red sandstone buildings that mirror each other, and face the sides of the tomb. The backs of the buildings parallel the western and eastern walls. The western building is a mosque and the other is the jawab (answer), thought to have been constructed for architectural balance although it may have been used as a guesthouse. Distinctions between the two buildings include the jawab's lack of a mihrab (a niche in a mosque's wall facing Mecca), and its floors of geometric design whereas the floor of the mosque is laid with outlines of 569 prayer rugs in black marble. The mosque's basic design of a long hall surmounted by three domes is similar to others built by Shah Jahan, particularly the Masjid-i Jahān-Numā, or Jama Masjid, Delhi. The Mughal mosques of this period divide the sanctuary hall into three areas comprising a main sanctuary and slightly smaller sanctuaries on either side. At the Taj Mahal, each sanctuary opens onto an expansive vaulting dome. The outlying buildings were completed in 1643.

 

CONSTRUCTION

The Taj Mahal is built on a parcel of land to the south of the walled city of Agra. Shah Jahan presented Maharajah Jai Singh with a large palace in the center of Agra in exchange for the land. An area of roughly three acres was excavated, filled with dirt to reduce seepage, and leveled at 50 metres above riverbank. In the tomb area, wells were dug and filled with stone and rubble to form the footings of the tomb. Instead of lashed bamboo, workmen constructed a colossal brick scaffold that mirrored the tomb. The scaffold was so enormous that foremen estimated it would take years to dismantle.

 

The Taj Mahal was constructed using materials from all over India and Asia. It is believed over 1,000 elephants were used to transport building materials. The translucent white marble was brought from Makrana, Rajasthan, the jasper from Punjab, jade and crystal from China. The turquoise was from Tibet and the Lapis lazuli from Afghanistan, while the sapphire came from Sri Lanka and the carnelian from Arabia. In all, twenty eight types of precious and semi-precious stones were inlaid into the white marble.

 

According to the legend, Shah Jahan decreed that anyone could keep the bricks taken from the scaffold, and thus it was dismantled by peasants overnight. A fifteen kilometer tamped-earth ramp was built to transport marble and materials to the construction site and teams of twenty or thirty oxen pulled the blocks on specially constructed wagons. An elaborate post-and-beam pulley system was used to raise the blocks into desired position. Water was drawn from the river by a series of purs, an animal-powered rope and bucket mechanism, into a large storage tank and raised to a large distribution tank. It was passed into three subsidiary tanks, from which it was piped to the complex.

 

The plinth and tomb took roughly 12 years to complete. The remaining parts of the complex took an additional 10 years and were completed in order of minarets, mosque and jawab, and gateway. Since the complex was built in stages, discrepancies exist in completion dates due to differing opinions on "completion". Construction of the mausoleum itself was essentially completed by 1643 while work continued on the outlying buildings. Estimates of the cost of construction vary due to difficulties in estimating costs across time. The total cost has been estimated to be about 32 million Indian rupees, which is around 52.8 billion Indian rupees ($827 million US) based on 2015 values.

 

LATER DAYS

Abdul Hamid Lahauri in his book Badshahnama refers to Taj Mahal as rauza-i munawwara, meaning the illumined or illustrious tomb. Soon after the Taj Mahal's completion, Shah Jahan was deposed by his son Aurangzeb and put under house arrest at nearby Agra Fort. Upon Shah Jahan's death, Aurangzeb buried him in the mausoleum next to his wife. In the 18th century, the Jat rulers of Bharatpur invaded Agra and attacked the Taj Mahal, the two chandeliers, one of agate and another of silver, which were hung over the main cenotaph, were taken away by them, along with the gold and silver screen. Kanbo, a Mughal historian, said the gold shield which covered the 15-foot high finial at the top of the main dome was also removed during the Jat despoliation.

 

By the late 19th century, parts of the buildings had fallen into disrepair. During the time of the Indian rebellion of 1857, the Taj Mahal was defaced by British soldiers and government officials, who chiselled out precious stones and lapis lazuli from its walls. At the end of the 19th century, British viceroy Lord Curzon ordered a sweeping restoration project, which was completed in 1908. He also commissioned the large lamp in the interior chamber, modelled after one in a Cairo mosque. During this time the garden was remodelled with British-style lawns that are still in place today.

 

THREATS

In 1942, the government erected a scaffolding to disguise the building in anticipation of air attacks by the Japanese Air Force. During the India-Pakistan wars of 1965 and 1971, scaffoldings were again erected to mislead bomber pilots.

 

More recent threats have come from environmental pollution on the banks of Yamuna River including acid rain due to the Mathura Oil Refinery, which was opposed by Supreme Court of India directives. The pollution has been turning the Taj Mahal yellow. To help control the pollution, the Indian government has set up the Taj Trapezium Zone (TTZ), a 10,400-square-kilometre area around the monument where strict emissions standards are in place.

 

Concerns for the tomb's structural integrity have recently been raised because of a decline in the groundwater level in the Yamuna river basin which is falling at a rate of around 5 feet a year. In 2010, cracks appeared in parts of the tomb, and the minarets which surround the monument were showing signs of tilting, as the wooden foundation of the tomb may be rotting due to lack of water. In 2011 it was reported that some predictions indicated that the tomb could collapse within 5 years.

 

TOURISM

The Taj Mahal attracts a large number of tourists. UNESCO documented more than 2 million visitors in 2001, which increased to about 3 million in 2015. A two tier pricing system is in place, with a significantly lower entrance fee for Indian citizens and a more expensive one for foreigners. Most tourists visit in the cooler months of October, November and February. Polluting traffic is not allowed near the complex and tourists must either walk from parking lots or catch an electric bus. The Khawasspuras (northern courtyards) are currently being restored for use as a new visitor center.

 

The small town to the south of the Taj, known as Taj Ganji or Mumtazabad, was originally constructed with caravanserais, bazaars and markets to serve the needs of visitors and workmen. Lists of recommended travel destinations often feature the Taj Mahal, which also appears in several listings of seven wonders of the modern world, including the recently announced New Seven Wonders of the World, a recent poll with 100 million votes.

 

The grounds are open from 06:00 to 19:00 weekdays, except for Friday when the complex is open for prayers at the mosque between 12:00 and 14:00. The complex is open for night viewing on the day of the full moon and two days before and after, excluding Fridays and the month of Ramadan. For security reasons only five items - water in transparent bottles, small video cameras, still cameras, mobile phones and small ladies' purses - are allowed inside the Taj Mahal.

 

MYTHS

Ever since its construction, the building has been the source of an admiration transcending culture and geography, and so personal and emotional responses have consistently eclipsed scholastic appraisals of the monument. A longstanding myth holds that Shah Jahan planned a mausoleum to be built in black marble as a Black Taj Mahal across the Yamuna river. The idea originates from fanciful writings of Jean-Baptiste Tavernier, a European traveller who visited Agra in 1665. It was suggested that Shah Jahan was overthrown by his son Aurangzeb before it could be built. Ruins of blackened marble across the river in Moonlight Garden, Mahtab Bagh, seemed to support this legend. However, excavations carried out in the 1990s found that they were discolored white stones that had turned black. A more credible theory for the origins of the black mausoleum was demonstrated in 2006 by archaeologists who reconstructed part of the pool in the Moonlight Garden. A dark reflection of the white mausoleum could clearly be seen, befitting Shah Jahan's obsession with symmetry and the positioning of the pool itself.

 

No evidence exists for claims that describe, often in horrific detail, the deaths, dismemberments and mutilations which Shah Jahan supposedly inflicted on various architects and craftsmen associated with the tomb. Some stories claim that those involved in construction signed contracts committing themselves to have no part in any similar design. Similar claims are made for many famous buildings. No evidence exists for claims that Lord William Bentinck, governor-general of India in the 1830s, supposedly planned to demolish the Taj Mahal and auction off the marble. Bentinck's biographer John Rosselli says that the story arose from Bentinck's fund-raising sale of discarded marble from Agra Fort.

 

Another myth suggests that beating the silhouette of the finial will cause water to come forth. To this day, officials find broken bangles surrounding the silhouette.

 

In 2000, India's Supreme Court dismissed P. N. Oak's petition to declare that a Hindu king built the Taj Mahal. In 2005 a similar petition was dismissed by the Allahabad High Court. This case was brought by Amar Nath Mishra, a social worker and preacher who says that the Taj Mahal was built by the Hindu King Parmar Dev in 1196.

 

WIKIPEDIA

The all-new Jaguar XF brings an unrivalled blend of design, luxury, technology and efficiency to lead the business car segment, underpinned by class-leading driving dynamics and refinement.

  

+++ DISCLAIMER +++

Nothing you see here is real, even though the conversion or the presented background story might be based historical facts. BEWARE!

  

Some background:

The Gloster Glaive was basically a modernized and re-engined variant of the successful, British-built Gloster Gladiator (or Gloster SS.37), the RAF’s final biplane fighter to enter service. The Gladiator was not only widely used by the RAF at the dawn of WWII and in almost every theatre of operations, but also by many other nations. Operators included Norway, Belgium, Sweden, Greece, Latvia, Lithuania or Nationalist China, and while the RAF already opted for more modern monoplanes, Gloster saw the opportunity to sell an updated Gladiator to countries which were not as progressive.

Originally designated Gladiator Mk. IV, the machine received many aerodynamic refinements and the motor was changed from a draggy radial to a liquid-cooled inline engine. The latter was the new Rolls Royce Peregrine, a development of the Kestrel. It was, in its original form, a 21-litre (1,300 cu in) liquid-cooled V-12 aero engine ), delivering 885-horsepower (660 kW). The engine was housed under a streamlined cowling, driving a three blade metal propeller, and was coupled with a ventral radiator bath, reminiscent of the Hawker Fury biplane’s arrangement.

 

Structural improvements included an all-metal monocoque fuselage and stabilizers, as well as new wings and streamlined struts with reduced bracing. The upper wing was enlarged and of all-metal construction, too, while the lower wings were reduced in span and area, almost resulting in a sesquiplane layout. The total wing area was only marginally reduced, though.

The fixed landing gear was retained, but the main wheels were now covered with spats. The pilot still sat in a fully enclosed cockpit, the armament consisted of four machine guns, similar to the Gladiator. But for the Glaive, all Browning machine guns were synchronized and mounted in the fuselage: one pair was placed on top of the cowling, in front of the cockpit. Another pair, much like the Gladiator’s arrangement was placed in the fuselage flanks, below the exhaust outlets.

 

Compared with the Gladiator, the design changes were so fundamental that Gloster eventually decided to allocate a separate designation – also with a view to the type’s foreign marketing, since a new aircraft appeared more attractive than another mark of a pre-war design. For the type’s virgin flight in late 1938 the name “Glaive” was unveiled to the public, and several smaller European air forces immediately showed interest, including Greece, Croatia, Turkey, Portugal and Egypt.

 

Greece was one of the initial customers, and the first of a total of 24 aircraft for the Hellenic Air Force was delivered in early 1939, with 24 more on order (which were never delivered, though). The initial batch arrived just in time, since tension had been building between Greece and Italy since 7 April 1939, when Italian troops occupied Albania. On 28 October 1940, Italy issued an ultimatum to Greece, which was promptly rejected. A few hours later, Italian troops launched an invasion of Greece, initiating the Greco-Italian War.

 

The Hellenic Gloster Glaives were split among three Mirae Dioxeos (Fighter Squadrons): the 21st at Trikala, 22nd at Thessaloniki and 23rd at Larissa. When Italy attacked in October 1940, the British fighter was, together with the PZL 24, the Greeks' only modern type in adequate numbers. However, by late 1940, the Gloster Glaive was already no longer a front-runner despite a powerful powerplant and satisfactory armament. It had no speed advantage over the Fiat Cr.42 nor could it outfly the nimble Italian biplane, and it was much slower than the Macchi MC.200 and the Fiat G.50 it was pitted against. Its agility was the only real advantage against the Italian fighters, whose reliance on the slow firing Breda-SAFAT 12.7mm machine guns proved detrimental.

 

Anyway, on 5 April 1941, German forces invaded Greece and quickly established air superiority. As the Allied troops retreated, British and Hellenic forces covered them, before flying to Crete during the last week of April. There, the refugee aircraft recorded a few claims over twin-engine aircraft before being evacuated to Egypt during the Battle of Crete.

 

Overall, the Glaives performed gallantly during the early period of the conflict, holding their own against impossible numerical odds and despite the fact that their main target were enemy bombers which forced them to fight at a disadvantage against enemy fighters. Italian claims of easy superiority over the Albanian front were vastly over-rated and their kill claims even exceeded the total number of operational fighters on the Greek side. Total Greek fighter losses in combat came to 24 a/c with the Greek fighter pilots claiming 64 confirmed kills and 24 probables (about two third bombers).

 

By April 1941, however, lack of spares and attrition had forced the Hellenic Air Force to merge the surviving seven Glaives with five leftover PZL.24s into one understrength squadron supported by five Gloster Gladiators Mk I & II and the two surviving MB.151s. These fought hopelessly against the Luftwaffe onslaught, and most aircraft were eventually lost on the ground. None of the Hellenic Gloster Glaives survived the conflict.

  

General characteristics:

Crew: two

Length: 8.92m (29 ft 3 in)

Wingspan: 34 ft 0 in (10.36 m)

Height: 11 ft 9 in (3.58 m)

Wing area: 317 ft² (29.4 m²)

Empty weight: 1,295 kg (2,855 lb)

Max takeoff weight: 1,700 kg (3,748 lb)

 

Powerplant:

1× Rolls Royce Peregrine II liquid-cooled V12 inline engine, rated at 940 hp (700 kw)

 

Performance:

Maximum speed: 405 km/h (252 mph; 219 kn) at 4,400 m (14,436 ft)

Cruise speed: 345 km/h (214 mph; 186 kn)

Stall speed: 60 mph (52 knots, 96 km/h)

Range: 373 mi (600 km; 324 nmi)

Endurance: 2 hours

Service ceiling: 10,600 m (34,800 ft)

Rate of climb: 2,982 ft/min (15.15 m/s)

Time to altitude: 10.000 ft (3.050 m) in 3 minutes 20 seconds

 

Armament:

4× 0.303 calibre (7.7 mm) M1919 Browning machine guns in the fuselage

Provisions for 6× 10 kg (22 lb) or 4x 20 kg (44 lb) bombs under the lower wings

  

The kit and its assembly:

The fictional Gloster Glaive started quite simple with the idea of replacing the Gladiator’s radial with an inline engine. But this soon did not appear enough for an update – the Peregrine hardly delivered much more power than the former Mercury, so I considered some structural updates, too. Most of them comprised the replacement of former fabric-covered structures, and this led conceptually to a kitbash with only some Gladiator fuselage and tail parts left.

 

The basis is (once more) the very nice Matchbox Gloster Gladiator, but it was heavily modified. As an initial step, fuselage, fin and stabilizers (all OOB parts) lost their rib-and-fabric structure, simply sanded away. A minor detail, but it changes the overall look of the aircraft a lot, making it appear much more modern.

The fuselage was left without the OOB radial, and instead a leftover Merlin front end from an Airfix Hurricane (ca. 1cm long, left over from one of my first whif builds ever, a Hurricane with a radial engine!) was added. The lines match pretty well: the side profile looks sleek, if not elegant, but the Gladiator fuselage turned out to be wider than expected. Some major body work/PSR was necessary to integrate the new nose, but the result looks very good.

 

The liquid-cooled engine necessitated a radiator somewhere on the airframe…! Since I wanted the nose to remain slim and streamlined I eventually placed the radiator bath under the fuselage, much like the arrangement of the Hawker Fury biplane. The radiator itself comes from a late Spitfire (FROG kit).

The exhaust was taken from the Hurricane kit, too, and matching slits dug into the putty nose to take them. The three blade propeller is a mash-up, too: the spinner belongs, IIRC, to an early Spitfire (left over from an AZ Models kit) while the blades came from a damaged Matchbox Brewster Buffalo.

 

The Gladiator’s fuselage flank machine guns were kept and their “bullet channels” extrapolated along the new cowling, running under the new exhaust pipes. Another pair of machine guns were placed on top of the engine – for these, openings were carved into the upper hull and small fairings (similar to the Browning guns in the flanks) added. This arrangement appeared plausible to me, since the Gladiator’s oil cooler was not necessary anymore and the new lower wings (see below) were not big enough anymore to take the Gladiator’s underwing guns. Four MGs in the fuselage appears massive – but there were other types with such an arrangement, e.g. the Avia B-534 with four guns in the flanks and an inline engine.

 

The wings are complete replacements: the upper wing comes from a Heller Curtiss SBC4, while the lower wings as well as the spats (on shortened OOB Gladiator struts) come from an ICM Polikarpov I-153. All struts were scratched. Once the lower wings were in place and the relative position of the upper wing clear, the outer struts were carved from 1mm styrene sheet, using the I-153 design as benchmark. These were glued to the lower wing first, and, once totally dry after 24h, the upper wing was simply glued onto the top and the wing position adjusted. This was left to dry another 24h, and as a final step the four struts above the cowling (using the OOB struts, but as single parts and trimmed for proper fit) were placed. This way, a stable connection is guaranteed – and the result is surprisingly sturdy.

 

Rigging was done with heated sprue material – my personal favorite for this delicate task, and executed before painting the kit started so that the glue could cure and bond well.

  

Painting and markings:

The reason why this aircraft ended in Greek service is a color photograph of a crashed Hellenic Bloch M.B. 152 (coded ‘D 177’, to be specific). I guess that the picture was post-colored, though, because the aircraft of French origin sports rather weird colors: the picture shows a two-tone scheme in a deep, rather reddish chestnut brown and a light green that almost looks like teal. Unique, to say the least... Underside colors couldn’t be identified with certainty in the picture, but appeared like a pale but not too light blue grey.

 

Anyway, I assume that these colors are pure fiction and exaggerated Photoshop work, since the few M.B. 152s delivered to Greece carried AFAIK standard French camouflage (in French Khaki, Chestnut Brown and Blue-Grey on the upper surfaces, and a very light blue-grey from below). I’d assume that the contrast between the grey and green tones was not very obvious in the original photograph, so that the artist, not familiar with WWII paint schemes, replaced both colors with the strange teal tone and massively overmodulated the brown.

 

As weird as it looked, I liked this design and used it as an inspirational benchmark for my Hellenic Glaive build. After all, it’s a fictional aircraft… Upper basic colors are Humbrol 31 (RAF Slate Grey) and 160 (German Camouflage Red Brown), while the undersides became French Dark Blue Grey (ModelMaster Authentics 2105). The result looks rather odd…

Representing a combat-worn aircraft, I applied a thorough black ink wash and did heavier panel shading and dry-brushing on the leading edges, along with some visible touches of aluminum.

 

The Hellenic roundels come from a TL Modellbau aftermarket sheet. The tactical code was puzzled together from single letters, and the Greek “D” was created from single decal strips. For better contrast I used white decals – most Hellenic aircraft of the time had black codes, but the contrast is much better, and I found evidence that some machines actually carried white codes. The small fin flash is another free interpretation. Not every Hellenic aircraft carried these markings, and instead of painting the whole rudder in Greek colors I just applied a small fin flash. This was created with white and blue decal strips, closely matching the roundels’ colors.

 

Finally, after some soot stains around the guns and the exhausts, the kit was sealed with matt acrylic varnish.

  

Modified beyond recognition, perhaps…? The fictional Gloster Glaive looks IMHO good and very modern, just like one of those final biplane designs that were about to be outrun by monoplanes at the brink of WWII.

 

The Taj Mahal (/ˌtɑːdʒ məˈhɑːl/, more often /ˈtɑːʒ/; from Persian and Arabic, "crown of palaces", pronounced [ˈt̪aːdʒ mɛˈɦɛl]) is a white marble mausoleum located on the southern bank of Yamuna River in the Indian city of Agra. It was commissioned in 1632 by the Mughal emperor Shah Jahan (reigned 1628–1658) to house the tomb of his favorite wife of three, Mumtaz Mahal.

 

Construction of the mausoleum was essentially completed in 1643 but work continued on other phases of the project for an additional ten years. The Taj Mahal complex is believed to have been completed in its entirety in 1653 at a cost estimated at the time to be around 32 million Indian rupees, which in 2015 would be valued at around 52.8 billion Indian rupees ($827 million US). The construction project employed around 20,000 artisans under the guidance of a board of architects led by Ustad Ahmad Lahauri. The domed marble tomb is part of an integrated complex consisting of gardens and two red-sandstone buildings surrounded by a crenellated wall on three sides.

 

The Taj Mahal is regarded by many as the best example of Mughal architecture and is widely recognized as "the jewel of Muslim art in India". It is one of the world’s most celebrated structures and a symbol of India’s rich history. Designated a UNESCO World Heritage Site in 1983, the Taj Mahal attracts some 3 million visitors a year.

 

INSPIRATION

In 1631, Shah Jahan, emperor during the Mughal empire's period of greatest prosperity, was grief-stricken when his favorite of three wives and beloved companion, Mumtaz Mahal, a Persian princess, died during the birth of their 14th child, Gauhara Begum. Construction of the Taj Mahal began in 1632. The court chronicles of Shah Jahan's grief illustrate the love story traditionally held as an inspiration for Taj Mahal. The principal mausoleum was completed in 1643 and the surrounding buildings and garden were finished about five years later.

 

ARCHITECTURE AND DESIGN

The Taj Mahal incorporates and expands on design traditions of Persian and earlier Mughal architecture. Specific inspiration came from successful Timurid and Mughal buildings including; the Gur-e Amir (the tomb of Timur, progenitor of the Mughal dynasty, in Samarkand), Humayun's Tomb, Itmad-Ud-Daulah's Tomb (sometimes called the Baby Taj), and Shah Jahan's own Jama Masjid in Delhi. While earlier Mughal buildings were primarily constructed of red sandstone, Shah Jahan promoted the use of white marble inlaid with semi-precious stones. Buildings under his patronage reached new levels of refinement.

 

TOMB

The tomb is the central focus of the entire complex of the Taj Mahal. It is a large, white marble structure standing on a square plinth and consists of a symmetrical building with an iwan (an arch-shaped doorway) topped by a large dome and finial. Like most Mughal tombs, the basic elements are Persian in origin.

 

The base structure is a large multi-chambered cube with chamfered corners forming an unequal eight-sided structure that is approximately 55 metres on each of the four long sides. Each side of the iwan is framed with a huge pishtaq or vaulted archway with two similarly shaped arched balconies stacked on either side. This motif of stacked pishtaqs is replicated on the chamfered corner areas, making the design completely symmetrical on all sides of the building. Four minarets frame the tomb, one at each corner of the plinth facing the chamfered corners. The main chamber houses the false sarcophagi of Mumtaz Mahal and Shah Jahan; the actual graves are at a lower level.

 

The most spectacular feature is the marble dome that surmounts the tomb. The dome is nearly 35 metres high which is close in measurement to the length of the base, and accentuated by the cylindrical "drum" it sits on which is approximately 7 metres high. Because of its shape, the dome is often called an onion dome or amrud (guava dome). The top is decorated with a lotus design which also serves to accentuate its height. The shape of the dome is emphasized by four smaller domed chattris (kiosks) placed at its corners, which replicate the onion shape of the main dome. Their columned bases open through the roof of the tomb and provide light to the interior. Tall decorative spires (guldastas) extend from edges of base walls, and provide visual emphasis to the height of the dome. The lotus motif is repeated on both the chattris and guldastas. The dome and chattris are topped by a gilded finial which mixes traditional Persian and Hindustani decorative elements.

 

The main finial was originally made of gold but was replaced by a copy made of gilded bronze in the early 19th century. This feature provides a clear example of integration of traditional Persian and Hindu decorative elements. The finial is topped by a moon, a typical Islamic motif whose horns point heavenward.

 

The minarets, which are each more than 40 metres tall, display the designer's penchant for symmetry. They were designed as working minarets - a traditional element of mosques, used by the muezzin to call the Islamic faithful to prayer. Each minaret is effectively divided into three equal parts by two working balconies that ring the tower. At the top of the tower is a final balcony surmounted by a chattri that mirrors the design of those on the tomb. The chattris all share the same decorative elements of a lotus design topped by a gilded finial. The minarets were constructed slightly outside of the plinth so that in the event of collapse, a typical occurrence with many tall constructions of the period, the material from the towers would tend to fall away from the tomb.

 

EXTERIOR DECORATIONS

The exterior decorations of the Taj Mahal are among the finest in Mughal architecture. As the surface area changes, the decorations are refined proportionally. The decorative elements were created by applying paint, stucco, stone inlays or carvings. In line with the Islamic prohibition against the use of anthropomorphic forms, the decorative elements can be grouped into either calligraphy, abstract forms or vegetative motifs. Throughout the complex are passages from the Qur'an that comprise some of the decorative elements. Recent scholarship suggests that the passages were chosen by Amanat Khan.

 

The calligraphy on the Great Gate reads "O Soul, thou art at rest. Return to the Lord at peace with Him, and He at peace with you." The calligraphy was created in 1609 by a calligrapher named Abdul Haq. Shah Jahan conferred the title of "Amanat Khan" upon him as a reward for his "dazzling virtuosity". Near the lines from the Qur'an at the base of the interior dome is the inscription, "Written by the insignificant being, Amanat Khan Shirazi." Much of the calligraphy is composed of florid thuluth script made of jasper or black marble inlaid in white marble panels. Higher panels are written in slightly larger script to reduce the skewing effect when viewed from below. The calligraphy found on the marble cenotaphs in the tomb is particularly detailed and delicate.

 

Abstract forms are used throughout, especially in the plinth, minarets, gateway, mosque, jawab and, to a lesser extent, on the surfaces of the tomb. The domes and vaults of the sandstone buildings are worked with tracery of incised painting to create elaborate geometric forms. Herringbone inlays define the space between many of the adjoining elements. White inlays are used in sandstone buildings, and dark or black inlays on the white marbles. Mortared areas of the marble buildings have been stained or painted in a contrasting color which creates a complex array of geometric patterns. Floors and walkways use contrasting tiles or blocks in tessellation patterns.

 

On the lower walls of the tomb are white marble dados sculpted with realistic bas relief depictions of flowers and vines. The marble has been polished to emphasise the exquisite detailing of the carvings. The dado frames and archway spandrels have been decorated with pietra dura inlays of highly stylised, almost geometric vines, flowers and fruits. The inlay stones are of yellow marble, jasper and jade, polished and levelled to the surface of the walls.

 

INTERIOR DECORATION

The interior chamber of the Taj Mahal reaches far beyond traditional decorative elements. The inlay work is not pietra dura, but a lapidary of precious and semiprecious gemstones. The inner chamber is an octagon with the design allowing for entry from each face, although only the door facing the garden to the south is used. The interior walls are about 25 metres high and are topped by a "false" interior dome decorated with a sun motif. Eight pishtaq arches define the space at ground level and, as with the exterior, each lower pishtaq is crowned by a second pishtaq about midway up the wall. The four central upper arches form balconies or viewing areas, and each balcony's exterior window has an intricate screen or jali cut from marble. In addition to the light from the balcony screens, light enters through roof openings covered by chattris at the corners. The octagonal marble screen or jali bordering the cenotaphs is made from eight marble panels carved through with intricate pierce work. The remaining surfaces are inlaid in delicate detail with semi-precious stones forming twining vines, fruits and flowers. Each chamber wall is highly decorated with dado bas-relief, intricate lapidary inlay and refined calligraphy panels which reflect, in miniature detail, the design elements seen throughout the exterior of the complex.

 

Muslim tradition forbids elaborate decoration of graves. Hence, the bodies of Mumtaz and Shah Jahan were put in a relatively plain crypt beneath the inner chamber with their faces turned right, towards Mecca. Mumtaz Mahal's cenotaph is placed at the precise centre of the inner chamber on a rectangular marble base of 1.5 by 2.5 metres. Both the base and casket are elaborately inlaid with precious and semiprecious gems. Calligraphic inscriptions on the casket identify and praise Mumtaz. On the lid of the casket is a raised rectangular lozenge meant to suggest a writing tablet. Shah Jahan's cenotaph is beside Mumtaz's to the western side, and is the only visible asymmetric element in the entire complex. His cenotaph is bigger than his wife's, but reflects the same elements: a larger casket on a slightly taller base precisely decorated with lapidary and calligraphy that identifies him. On the lid of the casket is a traditional sculpture of a small pen box.

 

The pen box and writing tablet are traditional Mughal funerary icons decorating the caskets of men and women respectively. The Ninety Nine Names of God are calligraphic inscriptions on the sides of the actual tomb of Mumtaz Mahal. Other inscriptions inside the crypt include, "O Noble, O Magnificent, O Majestic, O Unique, O Eternal, O Glorious... ". The tomb of Shah Jahan bears a calligraphic inscription that reads; "He travelled from this world to the banquet-hall of Eternity on the night of the twenty-sixth of the month of Rajab, in the year 1076 Hijri."

 

GARDEN

The complex is set around a large 300-metre square charbagh or Mughal garden. The garden uses raised pathways that divide each of the four quarters of the garden into 16 sunken parterres or flowerbeds. Halfway between the tomb and gateway in the center of the garden is a raised marble water tank with a reflecting pool positioned on a north-south axis to reflect the image of the mausoleum. The raised marble water tank is called al Hawd al-Kawthar in reference to the "Tank of Abundance" promised to Muhammad.

 

Elsewhere, the garden is laid out with avenues of trees and fountains. The charbagh garden, a design inspired by Persian gardens, was introduced to India by Babur, the first Mughal emperor. It symbolises the four flowing rivers of Jannah (Paradise) and reflects the Paradise garden derived from the Persian paridaeza, meaning 'walled garden'. In mystic Islamic texts of the Mughal period, Paradise is described as an ideal garden of abundance with four rivers flowing from a central spring or mountain, separating the garden into north, west, south and east.

 

Most Mughal charbaghs are rectangular with a tomb or pavilion in the center. The Taj Mahal garden is unusual in that the main element, the tomb, is located at the end of the garden. With the discovery of Mahtab Bagh or "Moonlight Garden" on the other side of the Yamuna, the interpretation of the Archaeological Survey of India is that the Yamuna river itself was incorporated into the garden's design and was meant to be seen as one of the rivers of Paradise. Similarities in layout and architectural features with the Shalimar Gardens suggests both gardens may have been designed by the same architect, Ali Mardan. Early accounts of the garden describe its profusion of vegetation, including abundant roses, daffodils, and fruit trees. As the Mughal Empire declined, the Taj Mahal and its gardens also declined. By the end of the 19th century, the British Empire controlled more than three-fifths of India, and assumed management of the Taj Mahal. They changed the landscaping to their liking which more closely resembled the formal lawns of London.

 

OUTLYING BUILDINGS

The Taj Mahal complex is bordered on three sides by crenellated red sandstone walls; the side facing the river is open. Outside the walls are several additional mausoleums, including those of Shah Jahan's other wives, and a larger tomb for Mumtaz's favourite servant.

 

The main gateway (darwaza) is a monumental structure built primarily of marble, and reminiscent of the Mughal architecture of earlier emperors. Its archways mirror the shape of the tomb's archways, and its pishtaq arches incorporate the calligraphy that decorates the tomb. The vaulted ceilings and walls have elaborate geometric designs like those found in the other sandstone buildings in the complex.

 

At the far end of the complex are two grand red sandstone buildings that mirror each other, and face the sides of the tomb. The backs of the buildings parallel the western and eastern walls. The western building is a mosque and the other is the jawab (answer), thought to have been constructed for architectural balance although it may have been used as a guesthouse. Distinctions between the two buildings include the jawab's lack of a mihrab (a niche in a mosque's wall facing Mecca), and its floors of geometric design whereas the floor of the mosque is laid with outlines of 569 prayer rugs in black marble. The mosque's basic design of a long hall surmounted by three domes is similar to others built by Shah Jahan, particularly the Masjid-i Jahān-Numā, or Jama Masjid, Delhi. The Mughal mosques of this period divide the sanctuary hall into three areas comprising a main sanctuary and slightly smaller sanctuaries on either side. At the Taj Mahal, each sanctuary opens onto an expansive vaulting dome. The outlying buildings were completed in 1643.

 

CONSTRUCTION

The Taj Mahal is built on a parcel of land to the south of the walled city of Agra. Shah Jahan presented Maharajah Jai Singh with a large palace in the center of Agra in exchange for the land. An area of roughly three acres was excavated, filled with dirt to reduce seepage, and leveled at 50 metres above riverbank. In the tomb area, wells were dug and filled with stone and rubble to form the footings of the tomb. Instead of lashed bamboo, workmen constructed a colossal brick scaffold that mirrored the tomb. The scaffold was so enormous that foremen estimated it would take years to dismantle.

 

The Taj Mahal was constructed using materials from all over India and Asia. It is believed over 1,000 elephants were used to transport building materials. The translucent white marble was brought from Makrana, Rajasthan, the jasper from Punjab, jade and crystal from China. The turquoise was from Tibet and the Lapis lazuli from Afghanistan, while the sapphire came from Sri Lanka and the carnelian from Arabia. In all, twenty eight types of precious and semi-precious stones were inlaid into the white marble.

 

According to the legend, Shah Jahan decreed that anyone could keep the bricks taken from the scaffold, and thus it was dismantled by peasants overnight. A fifteen kilometer tamped-earth ramp was built to transport marble and materials to the construction site and teams of twenty or thirty oxen pulled the blocks on specially constructed wagons. An elaborate post-and-beam pulley system was used to raise the blocks into desired position. Water was drawn from the river by a series of purs, an animal-powered rope and bucket mechanism, into a large storage tank and raised to a large distribution tank. It was passed into three subsidiary tanks, from which it was piped to the complex.

 

The plinth and tomb took roughly 12 years to complete. The remaining parts of the complex took an additional 10 years and were completed in order of minarets, mosque and jawab, and gateway. Since the complex was built in stages, discrepancies exist in completion dates due to differing opinions on "completion". Construction of the mausoleum itself was essentially completed by 1643 while work continued on the outlying buildings. Estimates of the cost of construction vary due to difficulties in estimating costs across time. The total cost has been estimated to be about 32 million Indian rupees, which is around 52.8 billion Indian rupees ($827 million US) based on 2015 values.

 

LATER DAYS

Abdul Hamid Lahauri in his book Badshahnama refers to Taj Mahal as rauza-i munawwara, meaning the illumined or illustrious tomb. Soon after the Taj Mahal's completion, Shah Jahan was deposed by his son Aurangzeb and put under house arrest at nearby Agra Fort. Upon Shah Jahan's death, Aurangzeb buried him in the mausoleum next to his wife. In the 18th century, the Jat rulers of Bharatpur invaded Agra and attacked the Taj Mahal, the two chandeliers, one of agate and another of silver, which were hung over the main cenotaph, were taken away by them, along with the gold and silver screen. Kanbo, a Mughal historian, said the gold shield which covered the 15-foot high finial at the top of the main dome was also removed during the Jat despoliation.

 

By the late 19th century, parts of the buildings had fallen into disrepair. During the time of the Indian rebellion of 1857, the Taj Mahal was defaced by British soldiers and government officials, who chiselled out precious stones and lapis lazuli from its walls. At the end of the 19th century, British viceroy Lord Curzon ordered a sweeping restoration project, which was completed in 1908. He also commissioned the large lamp in the interior chamber, modelled after one in a Cairo mosque. During this time the garden was remodelled with British-style lawns that are still in place today.

 

THREATS

In 1942, the government erected a scaffolding to disguise the building in anticipation of air attacks by the Japanese Air Force. During the India-Pakistan wars of 1965 and 1971, scaffoldings were again erected to mislead bomber pilots.

 

More recent threats have come from environmental pollution on the banks of Yamuna River including acid rain due to the Mathura Oil Refinery, which was opposed by Supreme Court of India directives. The pollution has been turning the Taj Mahal yellow. To help control the pollution, the Indian government has set up the Taj Trapezium Zone (TTZ), a 10,400-square-kilometre area around the monument where strict emissions standards are in place.

 

Concerns for the tomb's structural integrity have recently been raised because of a decline in the groundwater level in the Yamuna river basin which is falling at a rate of around 5 feet a year. In 2010, cracks appeared in parts of the tomb, and the minarets which surround the monument were showing signs of tilting, as the wooden foundation of the tomb may be rotting due to lack of water. In 2011 it was reported that some predictions indicated that the tomb could collapse within 5 years.

 

TOURISM

The Taj Mahal attracts a large number of tourists. UNESCO documented more than 2 million visitors in 2001, which increased to about 3 million in 2015. A two tier pricing system is in place, with a significantly lower entrance fee for Indian citizens and a more expensive one for foreigners. Most tourists visit in the cooler months of October, November and February. Polluting traffic is not allowed near the complex and tourists must either walk from parking lots or catch an electric bus. The Khawasspuras (northern courtyards) are currently being restored for use as a new visitor center.

 

The small town to the south of the Taj, known as Taj Ganji or Mumtazabad, was originally constructed with caravanserais, bazaars and markets to serve the needs of visitors and workmen. Lists of recommended travel destinations often feature the Taj Mahal, which also appears in several listings of seven wonders of the modern world, including the recently announced New Seven Wonders of the World, a recent poll with 100 million votes.

 

The grounds are open from 06:00 to 19:00 weekdays, except for Friday when the complex is open for prayers at the mosque between 12:00 and 14:00. The complex is open for night viewing on the day of the full moon and two days before and after, excluding Fridays and the month of Ramadan. For security reasons only five items - water in transparent bottles, small video cameras, still cameras, mobile phones and small ladies' purses - are allowed inside the Taj Mahal.

 

MYTHS

Ever since its construction, the building has been the source of an admiration transcending culture and geography, and so personal and emotional responses have consistently eclipsed scholastic appraisals of the monument. A longstanding myth holds that Shah Jahan planned a mausoleum to be built in black marble as a Black Taj Mahal across the Yamuna river. The idea originates from fanciful writings of Jean-Baptiste Tavernier, a European traveller who visited Agra in 1665. It was suggested that Shah Jahan was overthrown by his son Aurangzeb before it could be built. Ruins of blackened marble across the river in Moonlight Garden, Mahtab Bagh, seemed to support this legend. However, excavations carried out in the 1990s found that they were discolored white stones that had turned black. A more credible theory for the origins of the black mausoleum was demonstrated in 2006 by archaeologists who reconstructed part of the pool in the Moonlight Garden. A dark reflection of the white mausoleum could clearly be seen, befitting Shah Jahan's obsession with symmetry and the positioning of the pool itself.

 

No evidence exists for claims that describe, often in horrific detail, the deaths, dismemberments and mutilations which Shah Jahan supposedly inflicted on various architects and craftsmen associated with the tomb. Some stories claim that those involved in construction signed contracts committing themselves to have no part in any similar design. Similar claims are made for many famous buildings. No evidence exists for claims that Lord William Bentinck, governor-general of India in the 1830s, supposedly planned to demolish the Taj Mahal and auction off the marble. Bentinck's biographer John Rosselli says that the story arose from Bentinck's fund-raising sale of discarded marble from Agra Fort.

 

Another myth suggests that beating the silhouette of the finial will cause water to come forth. To this day, officials find broken bangles surrounding the silhouette.

 

In 2000, India's Supreme Court dismissed P. N. Oak's petition to declare that a Hindu king built the Taj Mahal. In 2005 a similar petition was dismissed by the Allahabad High Court. This case was brought by Amar Nath Mishra, a social worker and preacher who says that the Taj Mahal was built by the Hindu King Parmar Dev in 1196.

 

WIKIPEDIA

The Taj Mahal (/ˌtɑːdʒ məˈhɑːl/, more often /ˈtɑːʒ/; from Persian and Arabic, "crown of palaces", pronounced [ˈt̪aːdʒ mɛˈɦɛl]) is a white marble mausoleum located on the southern bank of Yamuna River in the Indian city of Agra. It was commissioned in 1632 by the Mughal emperor Shah Jahan (reigned 1628–1658) to house the tomb of his favorite wife of three, Mumtaz Mahal.

 

Construction of the mausoleum was essentially completed in 1643 but work continued on other phases of the project for an additional ten years. The Taj Mahal complex is believed to have been completed in its entirety in 1653 at a cost estimated at the time to be around 32 million Indian rupees, which in 2015 would be valued at around 52.8 billion Indian rupees ($827 million US). The construction project employed around 20,000 artisans under the guidance of a board of architects led by Ustad Ahmad Lahauri. The domed marble tomb is part of an integrated complex consisting of gardens and two red-sandstone buildings surrounded by a crenellated wall on three sides.

 

The Taj Mahal is regarded by many as the best example of Mughal architecture and is widely recognized as "the jewel of Muslim art in India". It is one of the world’s most celebrated structures and a symbol of India’s rich history. Designated a UNESCO World Heritage Site in 1983, the Taj Mahal attracts some 3 million visitors a year.

 

INSPIRATION

In 1631, Shah Jahan, emperor during the Mughal empire's period of greatest prosperity, was grief-stricken when his favorite of three wives and beloved companion, Mumtaz Mahal, a Persian princess, died during the birth of their 14th child, Gauhara Begum. Construction of the Taj Mahal began in 1632. The court chronicles of Shah Jahan's grief illustrate the love story traditionally held as an inspiration for Taj Mahal. The principal mausoleum was completed in 1643 and the surrounding buildings and garden were finished about five years later.

 

ARCHITECTURE AND DESIGN

The Taj Mahal incorporates and expands on design traditions of Persian and earlier Mughal architecture. Specific inspiration came from successful Timurid and Mughal buildings including; the Gur-e Amir (the tomb of Timur, progenitor of the Mughal dynasty, in Samarkand), Humayun's Tomb, Itmad-Ud-Daulah's Tomb (sometimes called the Baby Taj), and Shah Jahan's own Jama Masjid in Delhi. While earlier Mughal buildings were primarily constructed of red sandstone, Shah Jahan promoted the use of white marble inlaid with semi-precious stones. Buildings under his patronage reached new levels of refinement.

 

TOMB

The tomb is the central focus of the entire complex of the Taj Mahal. It is a large, white marble structure standing on a square plinth and consists of a symmetrical building with an iwan (an arch-shaped doorway) topped by a large dome and finial. Like most Mughal tombs, the basic elements are Persian in origin.

 

The base structure is a large multi-chambered cube with chamfered corners forming an unequal eight-sided structure that is approximately 55 metres on each of the four long sides. Each side of the iwan is framed with a huge pishtaq or vaulted archway with two similarly shaped arched balconies stacked on either side. This motif of stacked pishtaqs is replicated on the chamfered corner areas, making the design completely symmetrical on all sides of the building. Four minarets frame the tomb, one at each corner of the plinth facing the chamfered corners. The main chamber houses the false sarcophagi of Mumtaz Mahal and Shah Jahan; the actual graves are at a lower level.

 

The most spectacular feature is the marble dome that surmounts the tomb. The dome is nearly 35 metres high which is close in measurement to the length of the base, and accentuated by the cylindrical "drum" it sits on which is approximately 7 metres high. Because of its shape, the dome is often called an onion dome or amrud (guava dome). The top is decorated with a lotus design which also serves to accentuate its height. The shape of the dome is emphasized by four smaller domed chattris (kiosks) placed at its corners, which replicate the onion shape of the main dome. Their columned bases open through the roof of the tomb and provide light to the interior. Tall decorative spires (guldastas) extend from edges of base walls, and provide visual emphasis to the height of the dome. The lotus motif is repeated on both the chattris and guldastas. The dome and chattris are topped by a gilded finial which mixes traditional Persian and Hindustani decorative elements.

 

The main finial was originally made of gold but was replaced by a copy made of gilded bronze in the early 19th century. This feature provides a clear example of integration of traditional Persian and Hindu decorative elements. The finial is topped by a moon, a typical Islamic motif whose horns point heavenward.

 

The minarets, which are each more than 40 metres tall, display the designer's penchant for symmetry. They were designed as working minarets - a traditional element of mosques, used by the muezzin to call the Islamic faithful to prayer. Each minaret is effectively divided into three equal parts by two working balconies that ring the tower. At the top of the tower is a final balcony surmounted by a chattri that mirrors the design of those on the tomb. The chattris all share the same decorative elements of a lotus design topped by a gilded finial. The minarets were constructed slightly outside of the plinth so that in the event of collapse, a typical occurrence with many tall constructions of the period, the material from the towers would tend to fall away from the tomb.

 

EXTERIOR DECORATIONS

The exterior decorations of the Taj Mahal are among the finest in Mughal architecture. As the surface area changes, the decorations are refined proportionally. The decorative elements were created by applying paint, stucco, stone inlays or carvings. In line with the Islamic prohibition against the use of anthropomorphic forms, the decorative elements can be grouped into either calligraphy, abstract forms or vegetative motifs. Throughout the complex are passages from the Qur'an that comprise some of the decorative elements. Recent scholarship suggests that the passages were chosen by Amanat Khan.

 

The calligraphy on the Great Gate reads "O Soul, thou art at rest. Return to the Lord at peace with Him, and He at peace with you." The calligraphy was created in 1609 by a calligrapher named Abdul Haq. Shah Jahan conferred the title of "Amanat Khan" upon him as a reward for his "dazzling virtuosity". Near the lines from the Qur'an at the base of the interior dome is the inscription, "Written by the insignificant being, Amanat Khan Shirazi." Much of the calligraphy is composed of florid thuluth script made of jasper or black marble inlaid in white marble panels. Higher panels are written in slightly larger script to reduce the skewing effect when viewed from below. The calligraphy found on the marble cenotaphs in the tomb is particularly detailed and delicate.

 

Abstract forms are used throughout, especially in the plinth, minarets, gateway, mosque, jawab and, to a lesser extent, on the surfaces of the tomb. The domes and vaults of the sandstone buildings are worked with tracery of incised painting to create elaborate geometric forms. Herringbone inlays define the space between many of the adjoining elements. White inlays are used in sandstone buildings, and dark or black inlays on the white marbles. Mortared areas of the marble buildings have been stained or painted in a contrasting color which creates a complex array of geometric patterns. Floors and walkways use contrasting tiles or blocks in tessellation patterns.

 

On the lower walls of the tomb are white marble dados sculpted with realistic bas relief depictions of flowers and vines. The marble has been polished to emphasise the exquisite detailing of the carvings. The dado frames and archway spandrels have been decorated with pietra dura inlays of highly stylised, almost geometric vines, flowers and fruits. The inlay stones are of yellow marble, jasper and jade, polished and levelled to the surface of the walls.

 

INTERIOR DECORATION

The interior chamber of the Taj Mahal reaches far beyond traditional decorative elements. The inlay work is not pietra dura, but a lapidary of precious and semiprecious gemstones. The inner chamber is an octagon with the design allowing for entry from each face, although only the door facing the garden to the south is used. The interior walls are about 25 metres high and are topped by a "false" interior dome decorated with a sun motif. Eight pishtaq arches define the space at ground level and, as with the exterior, each lower pishtaq is crowned by a second pishtaq about midway up the wall. The four central upper arches form balconies or viewing areas, and each balcony's exterior window has an intricate screen or jali cut from marble. In addition to the light from the balcony screens, light enters through roof openings covered by chattris at the corners. The octagonal marble screen or jali bordering the cenotaphs is made from eight marble panels carved through with intricate pierce work. The remaining surfaces are inlaid in delicate detail with semi-precious stones forming twining vines, fruits and flowers. Each chamber wall is highly decorated with dado bas-relief, intricate lapidary inlay and refined calligraphy panels which reflect, in miniature detail, the design elements seen throughout the exterior of the complex.

 

Muslim tradition forbids elaborate decoration of graves. Hence, the bodies of Mumtaz and Shah Jahan were put in a relatively plain crypt beneath the inner chamber with their faces turned right, towards Mecca. Mumtaz Mahal's cenotaph is placed at the precise centre of the inner chamber on a rectangular marble base of 1.5 by 2.5 metres. Both the base and casket are elaborately inlaid with precious and semiprecious gems. Calligraphic inscriptions on the casket identify and praise Mumtaz. On the lid of the casket is a raised rectangular lozenge meant to suggest a writing tablet. Shah Jahan's cenotaph is beside Mumtaz's to the western side, and is the only visible asymmetric element in the entire complex. His cenotaph is bigger than his wife's, but reflects the same elements: a larger casket on a slightly taller base precisely decorated with lapidary and calligraphy that identifies him. On the lid of the casket is a traditional sculpture of a small pen box.

 

The pen box and writing tablet are traditional Mughal funerary icons decorating the caskets of men and women respectively. The Ninety Nine Names of God are calligraphic inscriptions on the sides of the actual tomb of Mumtaz Mahal. Other inscriptions inside the crypt include, "O Noble, O Magnificent, O Majestic, O Unique, O Eternal, O Glorious... ". The tomb of Shah Jahan bears a calligraphic inscription that reads; "He travelled from this world to the banquet-hall of Eternity on the night of the twenty-sixth of the month of Rajab, in the year 1076 Hijri."

 

GARDEN

The complex is set around a large 300-metre square charbagh or Mughal garden. The garden uses raised pathways that divide each of the four quarters of the garden into 16 sunken parterres or flowerbeds. Halfway between the tomb and gateway in the center of the garden is a raised marble water tank with a reflecting pool positioned on a north-south axis to reflect the image of the mausoleum. The raised marble water tank is called al Hawd al-Kawthar in reference to the "Tank of Abundance" promised to Muhammad.

 

Elsewhere, the garden is laid out with avenues of trees and fountains. The charbagh garden, a design inspired by Persian gardens, was introduced to India by Babur, the first Mughal emperor. It symbolises the four flowing rivers of Jannah (Paradise) and reflects the Paradise garden derived from the Persian paridaeza, meaning 'walled garden'. In mystic Islamic texts of the Mughal period, Paradise is described as an ideal garden of abundance with four rivers flowing from a central spring or mountain, separating the garden into north, west, south and east.

 

Most Mughal charbaghs are rectangular with a tomb or pavilion in the center. The Taj Mahal garden is unusual in that the main element, the tomb, is located at the end of the garden. With the discovery of Mahtab Bagh or "Moonlight Garden" on the other side of the Yamuna, the interpretation of the Archaeological Survey of India is that the Yamuna river itself was incorporated into the garden's design and was meant to be seen as one of the rivers of Paradise. Similarities in layout and architectural features with the Shalimar Gardens suggests both gardens may have been designed by the same architect, Ali Mardan. Early accounts of the garden describe its profusion of vegetation, including abundant roses, daffodils, and fruit trees. As the Mughal Empire declined, the Taj Mahal and its gardens also declined. By the end of the 19th century, the British Empire controlled more than three-fifths of India, and assumed management of the Taj Mahal. They changed the landscaping to their liking which more closely resembled the formal lawns of London.

 

OUTLYING BUILDINGS

The Taj Mahal complex is bordered on three sides by crenellated red sandstone walls; the side facing the river is open. Outside the walls are several additional mausoleums, including those of Shah Jahan's other wives, and a larger tomb for Mumtaz's favourite servant.

 

The main gateway (darwaza) is a monumental structure built primarily of marble, and reminiscent of the Mughal architecture of earlier emperors. Its archways mirror the shape of the tomb's archways, and its pishtaq arches incorporate the calligraphy that decorates the tomb. The vaulted ceilings and walls have elaborate geometric designs like those found in the other sandstone buildings in the complex.

 

At the far end of the complex are two grand red sandstone buildings that mirror each other, and face the sides of the tomb. The backs of the buildings parallel the western and eastern walls. The western building is a mosque and the other is the jawab (answer), thought to have been constructed for architectural balance although it may have been used as a guesthouse. Distinctions between the two buildings include the jawab's lack of a mihrab (a niche in a mosque's wall facing Mecca), and its floors of geometric design whereas the floor of the mosque is laid with outlines of 569 prayer rugs in black marble. The mosque's basic design of a long hall surmounted by three domes is similar to others built by Shah Jahan, particularly the Masjid-i Jahān-Numā, or Jama Masjid, Delhi. The Mughal mosques of this period divide the sanctuary hall into three areas comprising a main sanctuary and slightly smaller sanctuaries on either side. At the Taj Mahal, each sanctuary opens onto an expansive vaulting dome. The outlying buildings were completed in 1643.

 

CONSTRUCTION

The Taj Mahal is built on a parcel of land to the south of the walled city of Agra. Shah Jahan presented Maharajah Jai Singh with a large palace in the center of Agra in exchange for the land. An area of roughly three acres was excavated, filled with dirt to reduce seepage, and leveled at 50 metres above riverbank. In the tomb area, wells were dug and filled with stone and rubble to form the footings of the tomb. Instead of lashed bamboo, workmen constructed a colossal brick scaffold that mirrored the tomb. The scaffold was so enormous that foremen estimated it would take years to dismantle.

 

The Taj Mahal was constructed using materials from all over India and Asia. It is believed over 1,000 elephants were used to transport building materials. The translucent white marble was brought from Makrana, Rajasthan, the jasper from Punjab, jade and crystal from China. The turquoise was from Tibet and the Lapis lazuli from Afghanistan, while the sapphire came from Sri Lanka and the carnelian from Arabia. In all, twenty eight types of precious and semi-precious stones were inlaid into the white marble.

 

According to the legend, Shah Jahan decreed that anyone could keep the bricks taken from the scaffold, and thus it was dismantled by peasants overnight. A fifteen kilometer tamped-earth ramp was built to transport marble and materials to the construction site and teams of twenty or thirty oxen pulled the blocks on specially constructed wagons. An elaborate post-and-beam pulley system was used to raise the blocks into desired position. Water was drawn from the river by a series of purs, an animal-powered rope and bucket mechanism, into a large storage tank and raised to a large distribution tank. It was passed into three subsidiary tanks, from which it was piped to the complex.

 

The plinth and tomb took roughly 12 years to complete. The remaining parts of the complex took an additional 10 years and were completed in order of minarets, mosque and jawab, and gateway. Since the complex was built in stages, discrepancies exist in completion dates due to differing opinions on "completion". Construction of the mausoleum itself was essentially completed by 1643 while work continued on the outlying buildings. Estimates of the cost of construction vary due to difficulties in estimating costs across time. The total cost has been estimated to be about 32 million Indian rupees, which is around 52.8 billion Indian rupees ($827 million US) based on 2015 values.

 

LATER DAYS

Abdul Hamid Lahauri in his book Badshahnama refers to Taj Mahal as rauza-i munawwara, meaning the illumined or illustrious tomb. Soon after the Taj Mahal's completion, Shah Jahan was deposed by his son Aurangzeb and put under house arrest at nearby Agra Fort. Upon Shah Jahan's death, Aurangzeb buried him in the mausoleum next to his wife. In the 18th century, the Jat rulers of Bharatpur invaded Agra and attacked the Taj Mahal, the two chandeliers, one of agate and another of silver, which were hung over the main cenotaph, were taken away by them, along with the gold and silver screen. Kanbo, a Mughal historian, said the gold shield which covered the 15-foot high finial at the top of the main dome was also removed during the Jat despoliation.

 

By the late 19th century, parts of the buildings had fallen into disrepair. During the time of the Indian rebellion of 1857, the Taj Mahal was defaced by British soldiers and government officials, who chiselled out precious stones and lapis lazuli from its walls. At the end of the 19th century, British viceroy Lord Curzon ordered a sweeping restoration project, which was completed in 1908. He also commissioned the large lamp in the interior chamber, modelled after one in a Cairo mosque. During this time the garden was remodelled with British-style lawns that are still in place today.

 

THREATS

In 1942, the government erected a scaffolding to disguise the building in anticipation of air attacks by the Japanese Air Force. During the India-Pakistan wars of 1965 and 1971, scaffoldings were again erected to mislead bomber pilots.

 

More recent threats have come from environmental pollution on the banks of Yamuna River including acid rain due to the Mathura Oil Refinery, which was opposed by Supreme Court of India directives. The pollution has been turning the Taj Mahal yellow. To help control the pollution, the Indian government has set up the Taj Trapezium Zone (TTZ), a 10,400-square-kilometre area around the monument where strict emissions standards are in place.

 

Concerns for the tomb's structural integrity have recently been raised because of a decline in the groundwater level in the Yamuna river basin which is falling at a rate of around 5 feet a year. In 2010, cracks appeared in parts of the tomb, and the minarets which surround the monument were showing signs of tilting, as the wooden foundation of the tomb may be rotting due to lack of water. In 2011 it was reported that some predictions indicated that the tomb could collapse within 5 years.

 

TOURISM

The Taj Mahal attracts a large number of tourists. UNESCO documented more than 2 million visitors in 2001, which increased to about 3 million in 2015. A two tier pricing system is in place, with a significantly lower entrance fee for Indian citizens and a more expensive one for foreigners. Most tourists visit in the cooler months of October, November and February. Polluting traffic is not allowed near the complex and tourists must either walk from parking lots or catch an electric bus. The Khawasspuras (northern courtyards) are currently being restored for use as a new visitor center.

 

The small town to the south of the Taj, known as Taj Ganji or Mumtazabad, was originally constructed with caravanserais, bazaars and markets to serve the needs of visitors and workmen. Lists of recommended travel destinations often feature the Taj Mahal, which also appears in several listings of seven wonders of the modern world, including the recently announced New Seven Wonders of the World, a recent poll with 100 million votes.

 

The grounds are open from 06:00 to 19:00 weekdays, except for Friday when the complex is open for prayers at the mosque between 12:00 and 14:00. The complex is open for night viewing on the day of the full moon and two days before and after, excluding Fridays and the month of Ramadan. For security reasons only five items - water in transparent bottles, small video cameras, still cameras, mobile phones and small ladies' purses - are allowed inside the Taj Mahal.

 

MYTHS

Ever since its construction, the building has been the source of an admiration transcending culture and geography, and so personal and emotional responses have consistently eclipsed scholastic appraisals of the monument. A longstanding myth holds that Shah Jahan planned a mausoleum to be built in black marble as a Black Taj Mahal across the Yamuna river. The idea originates from fanciful writings of Jean-Baptiste Tavernier, a European traveller who visited Agra in 1665. It was suggested that Shah Jahan was overthrown by his son Aurangzeb before it could be built. Ruins of blackened marble across the river in Moonlight Garden, Mahtab Bagh, seemed to support this legend. However, excavations carried out in the 1990s found that they were discolored white stones that had turned black. A more credible theory for the origins of the black mausoleum was demonstrated in 2006 by archaeologists who reconstructed part of the pool in the Moonlight Garden. A dark reflection of the white mausoleum could clearly be seen, befitting Shah Jahan's obsession with symmetry and the positioning of the pool itself.

 

No evidence exists for claims that describe, often in horrific detail, the deaths, dismemberments and mutilations which Shah Jahan supposedly inflicted on various architects and craftsmen associated with the tomb. Some stories claim that those involved in construction signed contracts committing themselves to have no part in any similar design. Similar claims are made for many famous buildings. No evidence exists for claims that Lord William Bentinck, governor-general of India in the 1830s, supposedly planned to demolish the Taj Mahal and auction off the marble. Bentinck's biographer John Rosselli says that the story arose from Bentinck's fund-raising sale of discarded marble from Agra Fort.

 

Another myth suggests that beating the silhouette of the finial will cause water to come forth. To this day, officials find broken bangles surrounding the silhouette.

 

In 2000, India's Supreme Court dismissed P. N. Oak's petition to declare that a Hindu king built the Taj Mahal. In 2005 a similar petition was dismissed by the Allahabad High Court. This case was brought by Amar Nath Mishra, a social worker and preacher who says that the Taj Mahal was built by the Hindu King Parmar Dev in 1196.

 

WIKIPEDIA

The Taj Mahal (/ˌtɑːdʒ məˈhɑːl/, more often /ˈtɑːʒ/; from Persian and Arabic, "crown of palaces", pronounced [ˈt̪aːdʒ mɛˈɦɛl]) is a white marble mausoleum located on the southern bank of Yamuna River in the Indian city of Agra. It was commissioned in 1632 by the Mughal emperor Shah Jahan (reigned 1628–1658) to house the tomb of his favorite wife of three, Mumtaz Mahal.

 

Construction of the mausoleum was essentially completed in 1643 but work continued on other phases of the project for an additional ten years. The Taj Mahal complex is believed to have been completed in its entirety in 1653 at a cost estimated at the time to be around 32 million Indian rupees, which in 2015 would be valued at around 52.8 billion Indian rupees ($827 million US). The construction project employed around 20,000 artisans under the guidance of a board of architects led by Ustad Ahmad Lahauri. The domed marble tomb is part of an integrated complex consisting of gardens and two red-sandstone buildings surrounded by a crenellated wall on three sides.

 

The Taj Mahal is regarded by many as the best example of Mughal architecture and is widely recognized as "the jewel of Muslim art in India". It is one of the world’s most celebrated structures and a symbol of India’s rich history. Designated a UNESCO World Heritage Site in 1983, the Taj Mahal attracts some 3 million visitors a year.

 

INSPIRATION

In 1631, Shah Jahan, emperor during the Mughal empire's period of greatest prosperity, was grief-stricken when his favorite of three wives and beloved companion, Mumtaz Mahal, a Persian princess, died during the birth of their 14th child, Gauhara Begum. Construction of the Taj Mahal began in 1632. The court chronicles of Shah Jahan's grief illustrate the love story traditionally held as an inspiration for Taj Mahal. The principal mausoleum was completed in 1643 and the surrounding buildings and garden were finished about five years later.

 

ARCHITECTURE AND DESIGN

The Taj Mahal incorporates and expands on design traditions of Persian and earlier Mughal architecture. Specific inspiration came from successful Timurid and Mughal buildings including; the Gur-e Amir (the tomb of Timur, progenitor of the Mughal dynasty, in Samarkand), Humayun's Tomb, Itmad-Ud-Daulah's Tomb (sometimes called the Baby Taj), and Shah Jahan's own Jama Masjid in Delhi. While earlier Mughal buildings were primarily constructed of red sandstone, Shah Jahan promoted the use of white marble inlaid with semi-precious stones. Buildings under his patronage reached new levels of refinement.

 

TOMB

The tomb is the central focus of the entire complex of the Taj Mahal. It is a large, white marble structure standing on a square plinth and consists of a symmetrical building with an iwan (an arch-shaped doorway) topped by a large dome and finial. Like most Mughal tombs, the basic elements are Persian in origin.

 

The base structure is a large multi-chambered cube with chamfered corners forming an unequal eight-sided structure that is approximately 55 metres on each of the four long sides. Each side of the iwan is framed with a huge pishtaq or vaulted archway with two similarly shaped arched balconies stacked on either side. This motif of stacked pishtaqs is replicated on the chamfered corner areas, making the design completely symmetrical on all sides of the building. Four minarets frame the tomb, one at each corner of the plinth facing the chamfered corners. The main chamber houses the false sarcophagi of Mumtaz Mahal and Shah Jahan; the actual graves are at a lower level.

 

The most spectacular feature is the marble dome that surmounts the tomb. The dome is nearly 35 metres high which is close in measurement to the length of the base, and accentuated by the cylindrical "drum" it sits on which is approximately 7 metres high. Because of its shape, the dome is often called an onion dome or amrud (guava dome). The top is decorated with a lotus design which also serves to accentuate its height. The shape of the dome is emphasized by four smaller domed chattris (kiosks) placed at its corners, which replicate the onion shape of the main dome. Their columned bases open through the roof of the tomb and provide light to the interior. Tall decorative spires (guldastas) extend from edges of base walls, and provide visual emphasis to the height of the dome. The lotus motif is repeated on both the chattris and guldastas. The dome and chattris are topped by a gilded finial which mixes traditional Persian and Hindustani decorative elements.

 

The main finial was originally made of gold but was replaced by a copy made of gilded bronze in the early 19th century. This feature provides a clear example of integration of traditional Persian and Hindu decorative elements. The finial is topped by a moon, a typical Islamic motif whose horns point heavenward.

 

The minarets, which are each more than 40 metres tall, display the designer's penchant for symmetry. They were designed as working minarets - a traditional element of mosques, used by the muezzin to call the Islamic faithful to prayer. Each minaret is effectively divided into three equal parts by two working balconies that ring the tower. At the top of the tower is a final balcony surmounted by a chattri that mirrors the design of those on the tomb. The chattris all share the same decorative elements of a lotus design topped by a gilded finial. The minarets were constructed slightly outside of the plinth so that in the event of collapse, a typical occurrence with many tall constructions of the period, the material from the towers would tend to fall away from the tomb.

 

EXTERIOR DECORATIONS

The exterior decorations of the Taj Mahal are among the finest in Mughal architecture. As the surface area changes, the decorations are refined proportionally. The decorative elements were created by applying paint, stucco, stone inlays or carvings. In line with the Islamic prohibition against the use of anthropomorphic forms, the decorative elements can be grouped into either calligraphy, abstract forms or vegetative motifs. Throughout the complex are passages from the Qur'an that comprise some of the decorative elements. Recent scholarship suggests that the passages were chosen by Amanat Khan.

 

The calligraphy on the Great Gate reads "O Soul, thou art at rest. Return to the Lord at peace with Him, and He at peace with you." The calligraphy was created in 1609 by a calligrapher named Abdul Haq. Shah Jahan conferred the title of "Amanat Khan" upon him as a reward for his "dazzling virtuosity". Near the lines from the Qur'an at the base of the interior dome is the inscription, "Written by the insignificant being, Amanat Khan Shirazi." Much of the calligraphy is composed of florid thuluth script made of jasper or black marble inlaid in white marble panels. Higher panels are written in slightly larger script to reduce the skewing effect when viewed from below. The calligraphy found on the marble cenotaphs in the tomb is particularly detailed and delicate.

 

Abstract forms are used throughout, especially in the plinth, minarets, gateway, mosque, jawab and, to a lesser extent, on the surfaces of the tomb. The domes and vaults of the sandstone buildings are worked with tracery of incised painting to create elaborate geometric forms. Herringbone inlays define the space between many of the adjoining elements. White inlays are used in sandstone buildings, and dark or black inlays on the white marbles. Mortared areas of the marble buildings have been stained or painted in a contrasting color which creates a complex array of geometric patterns. Floors and walkways use contrasting tiles or blocks in tessellation patterns.

 

On the lower walls of the tomb are white marble dados sculpted with realistic bas relief depictions of flowers and vines. The marble has been polished to emphasise the exquisite detailing of the carvings. The dado frames and archway spandrels have been decorated with pietra dura inlays of highly stylised, almost geometric vines, flowers and fruits. The inlay stones are of yellow marble, jasper and jade, polished and levelled to the surface of the walls.

 

INTERIOR DECORATION

The interior chamber of the Taj Mahal reaches far beyond traditional decorative elements. The inlay work is not pietra dura, but a lapidary of precious and semiprecious gemstones. The inner chamber is an octagon with the design allowing for entry from each face, although only the door facing the garden to the south is used. The interior walls are about 25 metres high and are topped by a "false" interior dome decorated with a sun motif. Eight pishtaq arches define the space at ground level and, as with the exterior, each lower pishtaq is crowned by a second pishtaq about midway up the wall. The four central upper arches form balconies or viewing areas, and each balcony's exterior window has an intricate screen or jali cut from marble. In addition to the light from the balcony screens, light enters through roof openings covered by chattris at the corners. The octagonal marble screen or jali bordering the cenotaphs is made from eight marble panels carved through with intricate pierce work. The remaining surfaces are inlaid in delicate detail with semi-precious stones forming twining vines, fruits and flowers. Each chamber wall is highly decorated with dado bas-relief, intricate lapidary inlay and refined calligraphy panels which reflect, in miniature detail, the design elements seen throughout the exterior of the complex.

 

Muslim tradition forbids elaborate decoration of graves. Hence, the bodies of Mumtaz and Shah Jahan were put in a relatively plain crypt beneath the inner chamber with their faces turned right, towards Mecca. Mumtaz Mahal's cenotaph is placed at the precise centre of the inner chamber on a rectangular marble base of 1.5 by 2.5 metres. Both the base and casket are elaborately inlaid with precious and semiprecious gems. Calligraphic inscriptions on the casket identify and praise Mumtaz. On the lid of the casket is a raised rectangular lozenge meant to suggest a writing tablet. Shah Jahan's cenotaph is beside Mumtaz's to the western side, and is the only visible asymmetric element in the entire complex. His cenotaph is bigger than his wife's, but reflects the same elements: a larger casket on a slightly taller base precisely decorated with lapidary and calligraphy that identifies him. On the lid of the casket is a traditional sculpture of a small pen box.

 

The pen box and writing tablet are traditional Mughal funerary icons decorating the caskets of men and women respectively. The Ninety Nine Names of God are calligraphic inscriptions on the sides of the actual tomb of Mumtaz Mahal. Other inscriptions inside the crypt include, "O Noble, O Magnificent, O Majestic, O Unique, O Eternal, O Glorious... ". The tomb of Shah Jahan bears a calligraphic inscription that reads; "He travelled from this world to the banquet-hall of Eternity on the night of the twenty-sixth of the month of Rajab, in the year 1076 Hijri."

 

GARDEN

The complex is set around a large 300-metre square charbagh or Mughal garden. The garden uses raised pathways that divide each of the four quarters of the garden into 16 sunken parterres or flowerbeds. Halfway between the tomb and gateway in the center of the garden is a raised marble water tank with a reflecting pool positioned on a north-south axis to reflect the image of the mausoleum. The raised marble water tank is called al Hawd al-Kawthar in reference to the "Tank of Abundance" promised to Muhammad.

 

Elsewhere, the garden is laid out with avenues of trees and fountains. The charbagh garden, a design inspired by Persian gardens, was introduced to India by Babur, the first Mughal emperor. It symbolises the four flowing rivers of Jannah (Paradise) and reflects the Paradise garden derived from the Persian paridaeza, meaning 'walled garden'. In mystic Islamic texts of the Mughal period, Paradise is described as an ideal garden of abundance with four rivers flowing from a central spring or mountain, separating the garden into north, west, south and east.

 

Most Mughal charbaghs are rectangular with a tomb or pavilion in the center. The Taj Mahal garden is unusual in that the main element, the tomb, is located at the end of the garden. With the discovery of Mahtab Bagh or "Moonlight Garden" on the other side of the Yamuna, the interpretation of the Archaeological Survey of India is that the Yamuna river itself was incorporated into the garden's design and was meant to be seen as one of the rivers of Paradise. Similarities in layout and architectural features with the Shalimar Gardens suggests both gardens may have been designed by the same architect, Ali Mardan. Early accounts of the garden describe its profusion of vegetation, including abundant roses, daffodils, and fruit trees. As the Mughal Empire declined, the Taj Mahal and its gardens also declined. By the end of the 19th century, the British Empire controlled more than three-fifths of India, and assumed management of the Taj Mahal. They changed the landscaping to their liking which more closely resembled the formal lawns of London.

 

OUTLYING BUILDINGS

The Taj Mahal complex is bordered on three sides by crenellated red sandstone walls; the side facing the river is open. Outside the walls are several additional mausoleums, including those of Shah Jahan's other wives, and a larger tomb for Mumtaz's favourite servant.

 

The main gateway (darwaza) is a monumental structure built primarily of marble, and reminiscent of the Mughal architecture of earlier emperors. Its archways mirror the shape of the tomb's archways, and its pishtaq arches incorporate the calligraphy that decorates the tomb. The vaulted ceilings and walls have elaborate geometric designs like those found in the other sandstone buildings in the complex.

 

At the far end of the complex are two grand red sandstone buildings that mirror each other, and face the sides of the tomb. The backs of the buildings parallel the western and eastern walls. The western building is a mosque and the other is the jawab (answer), thought to have been constructed for architectural balance although it may have been used as a guesthouse. Distinctions between the two buildings include the jawab's lack of a mihrab (a niche in a mosque's wall facing Mecca), and its floors of geometric design whereas the floor of the mosque is laid with outlines of 569 prayer rugs in black marble. The mosque's basic design of a long hall surmounted by three domes is similar to others built by Shah Jahan, particularly the Masjid-i Jahān-Numā, or Jama Masjid, Delhi. The Mughal mosques of this period divide the sanctuary hall into three areas comprising a main sanctuary and slightly smaller sanctuaries on either side. At the Taj Mahal, each sanctuary opens onto an expansive vaulting dome. The outlying buildings were completed in 1643.

 

CONSTRUCTION

The Taj Mahal is built on a parcel of land to the south of the walled city of Agra. Shah Jahan presented Maharajah Jai Singh with a large palace in the center of Agra in exchange for the land. An area of roughly three acres was excavated, filled with dirt to reduce seepage, and leveled at 50 metres above riverbank. In the tomb area, wells were dug and filled with stone and rubble to form the footings of the tomb. Instead of lashed bamboo, workmen constructed a colossal brick scaffold that mirrored the tomb. The scaffold was so enormous that foremen estimated it would take years to dismantle.

 

The Taj Mahal was constructed using materials from all over India and Asia. It is believed over 1,000 elephants were used to transport building materials. The translucent white marble was brought from Makrana, Rajasthan, the jasper from Punjab, jade and crystal from China. The turquoise was from Tibet and the Lapis lazuli from Afghanistan, while the sapphire came from Sri Lanka and the carnelian from Arabia. In all, twenty eight types of precious and semi-precious stones were inlaid into the white marble.

 

According to the legend, Shah Jahan decreed that anyone could keep the bricks taken from the scaffold, and thus it was dismantled by peasants overnight. A fifteen kilometer tamped-earth ramp was built to transport marble and materials to the construction site and teams of twenty or thirty oxen pulled the blocks on specially constructed wagons. An elaborate post-and-beam pulley system was used to raise the blocks into desired position. Water was drawn from the river by a series of purs, an animal-powered rope and bucket mechanism, into a large storage tank and raised to a large distribution tank. It was passed into three subsidiary tanks, from which it was piped to the complex.

 

The plinth and tomb took roughly 12 years to complete. The remaining parts of the complex took an additional 10 years and were completed in order of minarets, mosque and jawab, and gateway. Since the complex was built in stages, discrepancies exist in completion dates due to differing opinions on "completion". Construction of the mausoleum itself was essentially completed by 1643 while work continued on the outlying buildings. Estimates of the cost of construction vary due to difficulties in estimating costs across time. The total cost has been estimated to be about 32 million Indian rupees, which is around 52.8 billion Indian rupees ($827 million US) based on 2015 values.

 

LATER DAYS

Abdul Hamid Lahauri in his book Badshahnama refers to Taj Mahal as rauza-i munawwara, meaning the illumined or illustrious tomb. Soon after the Taj Mahal's completion, Shah Jahan was deposed by his son Aurangzeb and put under house arrest at nearby Agra Fort. Upon Shah Jahan's death, Aurangzeb buried him in the mausoleum next to his wife. In the 18th century, the Jat rulers of Bharatpur invaded Agra and attacked the Taj Mahal, the two chandeliers, one of agate and another of silver, which were hung over the main cenotaph, were taken away by them, along with the gold and silver screen. Kanbo, a Mughal historian, said the gold shield which covered the 15-foot high finial at the top of the main dome was also removed during the Jat despoliation.

 

By the late 19th century, parts of the buildings had fallen into disrepair. During the time of the Indian rebellion of 1857, the Taj Mahal was defaced by British soldiers and government officials, who chiselled out precious stones and lapis lazuli from its walls. At the end of the 19th century, British viceroy Lord Curzon ordered a sweeping restoration project, which was completed in 1908. He also commissioned the large lamp in the interior chamber, modelled after one in a Cairo mosque. During this time the garden was remodelled with British-style lawns that are still in place today.

 

THREATS

In 1942, the government erected a scaffolding to disguise the building in anticipation of air attacks by the Japanese Air Force. During the India-Pakistan wars of 1965 and 1971, scaffoldings were again erected to mislead bomber pilots.

 

More recent threats have come from environmental pollution on the banks of Yamuna River including acid rain due to the Mathura Oil Refinery, which was opposed by Supreme Court of India directives. The pollution has been turning the Taj Mahal yellow. To help control the pollution, the Indian government has set up the Taj Trapezium Zone (TTZ), a 10,400-square-kilometre area around the monument where strict emissions standards are in place.

 

Concerns for the tomb's structural integrity have recently been raised because of a decline in the groundwater level in the Yamuna river basin which is falling at a rate of around 5 feet a year. In 2010, cracks appeared in parts of the tomb, and the minarets which surround the monument were showing signs of tilting, as the wooden foundation of the tomb may be rotting due to lack of water. In 2011 it was reported that some predictions indicated that the tomb could collapse within 5 years.

 

TOURISM

The Taj Mahal attracts a large number of tourists. UNESCO documented more than 2 million visitors in 2001, which increased to about 3 million in 2015. A two tier pricing system is in place, with a significantly lower entrance fee for Indian citizens and a more expensive one for foreigners. Most tourists visit in the cooler months of October, November and February. Polluting traffic is not allowed near the complex and tourists must either walk from parking lots or catch an electric bus. The Khawasspuras (northern courtyards) are currently being restored for use as a new visitor center.

 

The small town to the south of the Taj, known as Taj Ganji or Mumtazabad, was originally constructed with caravanserais, bazaars and markets to serve the needs of visitors and workmen. Lists of recommended travel destinations often feature the Taj Mahal, which also appears in several listings of seven wonders of the modern world, including the recently announced New Seven Wonders of the World, a recent poll with 100 million votes.

 

The grounds are open from 06:00 to 19:00 weekdays, except for Friday when the complex is open for prayers at the mosque between 12:00 and 14:00. The complex is open for night viewing on the day of the full moon and two days before and after, excluding Fridays and the month of Ramadan. For security reasons only five items - water in transparent bottles, small video cameras, still cameras, mobile phones and small ladies' purses - are allowed inside the Taj Mahal.

 

MYTHS

Ever since its construction, the building has been the source of an admiration transcending culture and geography, and so personal and emotional responses have consistently eclipsed scholastic appraisals of the monument. A longstanding myth holds that Shah Jahan planned a mausoleum to be built in black marble as a Black Taj Mahal across the Yamuna river. The idea originates from fanciful writings of Jean-Baptiste Tavernier, a European traveller who visited Agra in 1665. It was suggested that Shah Jahan was overthrown by his son Aurangzeb before it could be built. Ruins of blackened marble across the river in Moonlight Garden, Mahtab Bagh, seemed to support this legend. However, excavations carried out in the 1990s found that they were discolored white stones that had turned black. A more credible theory for the origins of the black mausoleum was demonstrated in 2006 by archaeologists who reconstructed part of the pool in the Moonlight Garden. A dark reflection of the white mausoleum could clearly be seen, befitting Shah Jahan's obsession with symmetry and the positioning of the pool itself.

 

No evidence exists for claims that describe, often in horrific detail, the deaths, dismemberments and mutilations which Shah Jahan supposedly inflicted on various architects and craftsmen associated with the tomb. Some stories claim that those involved in construction signed contracts committing themselves to have no part in any similar design. Similar claims are made for many famous buildings. No evidence exists for claims that Lord William Bentinck, governor-general of India in the 1830s, supposedly planned to demolish the Taj Mahal and auction off the marble. Bentinck's biographer John Rosselli says that the story arose from Bentinck's fund-raising sale of discarded marble from Agra Fort.

 

Another myth suggests that beating the silhouette of the finial will cause water to come forth. To this day, officials find broken bangles surrounding the silhouette.

 

In 2000, India's Supreme Court dismissed P. N. Oak's petition to declare that a Hindu king built the Taj Mahal. In 2005 a similar petition was dismissed by the Allahabad High Court. This case was brought by Amar Nath Mishra, a social worker and preacher who says that the Taj Mahal was built by the Hindu King Parmar Dev in 1196.

 

WIKIPEDIA

"With a woman of sophistication, class and modesty and refinement, I become a totally tongue-tied buffoon. I can't even look her straight in the face."

--Iain Glen, born 1961, Scottish actor--

 

--------------------------------------------------------

 

Way better on black (much better quality than the "L" option)

 

then you can hit "F" if you like it and "C" if you wish to comment.

 

Copyright 2013 © All rights reserved.

If you would like to use any of my images, please ask for permission first!

Larger size available on demand

 

Nimble, power, and refinement.

When one thinks of the Audi RS3, these words are likely to come in mind.

We figure styling should also be up on that list too, unfortunately, the factory wheels leaves much to be desired for the 400HP rocket. Thankfully, our V801’s are here to save the day.

 

A full face mesh design with a modern twist, the V801’s thinly milled spokes and diamond windows creates a delicate and sophisticated look that’s brimming with detail. Finished in Hyper Silver, the V801’s not only compliment the color of the RS3’s ground effects kit, but its angular lines as well.

 

But, don’t be fooled by the svelte appearance of the V801’s either; thanks to its flow form construction, the V801’s remain lightweight, yet incredibly strong. Engineered and tested to exceed VIA, JWL, and TUV standards, our V801’s are more than capable of handling whatever abuse the RS3 will put them through.

  

For sales and more information, be sure to contact us at sales@velocitymotoring.com

 

+++ DISCLAIMER +++

Nothing you see here is real, even though the conversion or the presented background story might be based historical facts. BEWARE!

  

Some background:

The Gloster Glaive was basically a modernized and re-engined variant of the successful, British-built Gloster Gladiator (or Gloster SS.37), the RAF’s final biplane fighter to enter service. The Gladiator was not only widely used by the RAF at the dawn of WWII and in almost every theatre of operations, but also by many other nations. Operators included Norway, Belgium, Sweden, Greece, Latvia, Lithuania or Nationalist China, and while the RAF already opted for more modern monoplanes, Gloster saw the opportunity to sell an updated Gladiator to countries which were not as progressive.

Originally designated Gladiator Mk. IV, the machine received many aerodynamic refinements and the motor was changed from a draggy radial to a liquid-cooled inline engine. The latter was the new Rolls Royce Peregrine, a development of the Kestrel. It was, in its original form, a 21-litre (1,300 cu in) liquid-cooled V-12 aero engine ), delivering 885-horsepower (660 kW). The engine was housed under a streamlined cowling, driving a three blade metal propeller, and was coupled with a ventral radiator bath, reminiscent of the Hawker Fury biplane’s arrangement.

 

Structural improvements included an all-metal monocoque fuselage and stabilizers, as well as new wings and streamlined struts with reduced bracing. The upper wing was enlarged and of all-metal construction, too, while the lower wings were reduced in span and area, almost resulting in a sesquiplane layout. The total wing area was only marginally reduced, though.

The fixed landing gear was retained, but the main wheels were now covered with spats. The pilot still sat in a fully enclosed cockpit, the armament consisted of four machine guns, similar to the Gladiator. But for the Glaive, all Browning machine guns were synchronized and mounted in the fuselage: one pair was placed on top of the cowling, in front of the cockpit. Another pair, much like the Gladiator’s arrangement was placed in the fuselage flanks, below the exhaust outlets.

 

Compared with the Gladiator, the design changes were so fundamental that Gloster eventually decided to allocate a separate designation – also with a view to the type’s foreign marketing, since a new aircraft appeared more attractive than another mark of a pre-war design. For the type’s virgin flight in late 1938 the name “Glaive” was unveiled to the public, and several smaller European air forces immediately showed interest, including Greece, Croatia, Turkey, Portugal and Egypt.

 

Greece was one of the initial customers, and the first of a total of 24 aircraft for the Hellenic Air Force was delivered in early 1939, with 24 more on order (which were never delivered, though). The initial batch arrived just in time, since tension had been building between Greece and Italy since 7 April 1939, when Italian troops occupied Albania. On 28 October 1940, Italy issued an ultimatum to Greece, which was promptly rejected. A few hours later, Italian troops launched an invasion of Greece, initiating the Greco-Italian War.

 

The Hellenic Gloster Glaives were split among three Mirae Dioxeos (Fighter Squadrons): the 21st at Trikala, 22nd at Thessaloniki and 23rd at Larissa. When Italy attacked in October 1940, the British fighter was, together with the PZL 24, the Greeks' only modern type in adequate numbers. However, by late 1940, the Gloster Glaive was already no longer a front-runner despite a powerful powerplant and satisfactory armament. It had no speed advantage over the Fiat Cr.42 nor could it outfly the nimble Italian biplane, and it was much slower than the Macchi MC.200 and the Fiat G.50 it was pitted against. Its agility was the only real advantage against the Italian fighters, whose reliance on the slow firing Breda-SAFAT 12.7mm machine guns proved detrimental.

 

Anyway, on 5 April 1941, German forces invaded Greece and quickly established air superiority. As the Allied troops retreated, British and Hellenic forces covered them, before flying to Crete during the last week of April. There, the refugee aircraft recorded a few claims over twin-engine aircraft before being evacuated to Egypt during the Battle of Crete.

 

Overall, the Glaives performed gallantly during the early period of the conflict, holding their own against impossible numerical odds and despite the fact that their main target were enemy bombers which forced them to fight at a disadvantage against enemy fighters. Italian claims of easy superiority over the Albanian front were vastly over-rated and their kill claims even exceeded the total number of operational fighters on the Greek side. Total Greek fighter losses in combat came to 24 a/c with the Greek fighter pilots claiming 64 confirmed kills and 24 probables (about two third bombers).

 

By April 1941, however, lack of spares and attrition had forced the Hellenic Air Force to merge the surviving seven Glaives with five leftover PZL.24s into one understrength squadron supported by five Gloster Gladiators Mk I & II and the two surviving MB.151s. These fought hopelessly against the Luftwaffe onslaught, and most aircraft were eventually lost on the ground. None of the Hellenic Gloster Glaives survived the conflict.

  

General characteristics:

Crew: two

Length: 8.92m (29 ft 3 in)

Wingspan: 34 ft 0 in (10.36 m)

Height: 11 ft 9 in (3.58 m)

Wing area: 317 ft² (29.4 m²)

Empty weight: 1,295 kg (2,855 lb)

Max takeoff weight: 1,700 kg (3,748 lb)

 

Powerplant:

1× Rolls Royce Peregrine II liquid-cooled V12 inline engine, rated at 940 hp (700 kw)

 

Performance:

Maximum speed: 405 km/h (252 mph; 219 kn) at 4,400 m (14,436 ft)

Cruise speed: 345 km/h (214 mph; 186 kn)

Stall speed: 60 mph (52 knots, 96 km/h)

Range: 373 mi (600 km; 324 nmi)

Endurance: 2 hours

Service ceiling: 10,600 m (34,800 ft)

Rate of climb: 2,982 ft/min (15.15 m/s)

Time to altitude: 10.000 ft (3.050 m) in 3 minutes 20 seconds

 

Armament:

4× 0.303 calibre (7.7 mm) M1919 Browning machine guns in the fuselage

Provisions for 6× 10 kg (22 lb) or 4x 20 kg (44 lb) bombs under the lower wings

  

The kit and its assembly:

The fictional Gloster Glaive started quite simple with the idea of replacing the Gladiator’s radial with an inline engine. But this soon did not appear enough for an update – the Peregrine hardly delivered much more power than the former Mercury, so I considered some structural updates, too. Most of them comprised the replacement of former fabric-covered structures, and this led conceptually to a kitbash with only some Gladiator fuselage and tail parts left.

 

The basis is (once more) the very nice Matchbox Gloster Gladiator, but it was heavily modified. As an initial step, fuselage, fin and stabilizers (all OOB parts) lost their rib-and-fabric structure, simply sanded away. A minor detail, but it changes the overall look of the aircraft a lot, making it appear much more modern.

The fuselage was left without the OOB radial, and instead a leftover Merlin front end from an Airfix Hurricane (ca. 1cm long, left over from one of my first whif builds ever, a Hurricane with a radial engine!) was added. The lines match pretty well: the side profile looks sleek, if not elegant, but the Gladiator fuselage turned out to be wider than expected. Some major body work/PSR was necessary to integrate the new nose, but the result looks very good.

 

The liquid-cooled engine necessitated a radiator somewhere on the airframe…! Since I wanted the nose to remain slim and streamlined I eventually placed the radiator bath under the fuselage, much like the arrangement of the Hawker Fury biplane. The radiator itself comes from a late Spitfire (FROG kit).

The exhaust was taken from the Hurricane kit, too, and matching slits dug into the putty nose to take them. The three blade propeller is a mash-up, too: the spinner belongs, IIRC, to an early Spitfire (left over from an AZ Models kit) while the blades came from a damaged Matchbox Brewster Buffalo.

 

The Gladiator’s fuselage flank machine guns were kept and their “bullet channels” extrapolated along the new cowling, running under the new exhaust pipes. Another pair of machine guns were placed on top of the engine – for these, openings were carved into the upper hull and small fairings (similar to the Browning guns in the flanks) added. This arrangement appeared plausible to me, since the Gladiator’s oil cooler was not necessary anymore and the new lower wings (see below) were not big enough anymore to take the Gladiator’s underwing guns. Four MGs in the fuselage appears massive – but there were other types with such an arrangement, e.g. the Avia B-534 with four guns in the flanks and an inline engine.

 

The wings are complete replacements: the upper wing comes from a Heller Curtiss SBC4, while the lower wings as well as the spats (on shortened OOB Gladiator struts) come from an ICM Polikarpov I-153. All struts were scratched. Once the lower wings were in place and the relative position of the upper wing clear, the outer struts were carved from 1mm styrene sheet, using the I-153 design as benchmark. These were glued to the lower wing first, and, once totally dry after 24h, the upper wing was simply glued onto the top and the wing position adjusted. This was left to dry another 24h, and as a final step the four struts above the cowling (using the OOB struts, but as single parts and trimmed for proper fit) were placed. This way, a stable connection is guaranteed – and the result is surprisingly sturdy.

 

Rigging was done with heated sprue material – my personal favorite for this delicate task, and executed before painting the kit started so that the glue could cure and bond well.

  

Painting and markings:

The reason why this aircraft ended in Greek service is a color photograph of a crashed Hellenic Bloch M.B. 152 (coded ‘D 177’, to be specific). I guess that the picture was post-colored, though, because the aircraft of French origin sports rather weird colors: the picture shows a two-tone scheme in a deep, rather reddish chestnut brown and a light green that almost looks like teal. Unique, to say the least... Underside colors couldn’t be identified with certainty in the picture, but appeared like a pale but not too light blue grey.

 

Anyway, I assume that these colors are pure fiction and exaggerated Photoshop work, since the few M.B. 152s delivered to Greece carried AFAIK standard French camouflage (in French Khaki, Chestnut Brown and Blue-Grey on the upper surfaces, and a very light blue-grey from below). I’d assume that the contrast between the grey and green tones was not very obvious in the original photograph, so that the artist, not familiar with WWII paint schemes, replaced both colors with the strange teal tone and massively overmodulated the brown.

 

As weird as it looked, I liked this design and used it as an inspirational benchmark for my Hellenic Glaive build. After all, it’s a fictional aircraft… Upper basic colors are Humbrol 31 (RAF Slate Grey) and 160 (German Camouflage Red Brown), while the undersides became French Dark Blue Grey (ModelMaster Authentics 2105). The result looks rather odd…

Representing a combat-worn aircraft, I applied a thorough black ink wash and did heavier panel shading and dry-brushing on the leading edges, along with some visible touches of aluminum.

 

The Hellenic roundels come from a TL Modellbau aftermarket sheet. The tactical code was puzzled together from single letters, and the Greek “D” was created from single decal strips. For better contrast I used white decals – most Hellenic aircraft of the time had black codes, but the contrast is much better, and I found evidence that some machines actually carried white codes. The small fin flash is another free interpretation. Not every Hellenic aircraft carried these markings, and instead of painting the whole rudder in Greek colors I just applied a small fin flash. This was created with white and blue decal strips, closely matching the roundels’ colors.

 

Finally, after some soot stains around the guns and the exhausts, the kit was sealed with matt acrylic varnish.

  

Modified beyond recognition, perhaps…? The fictional Gloster Glaive looks IMHO good and very modern, just like one of those final biplane designs that were about to be outrun by monoplanes at the brink of WWII.

 

much the same as the previous one, but with some more refinement...

Test for a colour change on my bird. Needs some refinement, but it looks ok.

Designed and folded by me from a 35 cm square of biotope paper, coloured with acrylic.

The Birmingham Small Arms Company Ltd (BSA) was established in 1861 by a group of fourteen gunsmith members of the Birmingham Small Arms Trade Association to produce guns using machinery and modern techniques. In 1880, BSA branched out into manufacturing bicycles and together with refinements in the small internal combustion engine, the next step was the production of motorcycles and later, cars. Their first model was a 498cc 3.5 HP motorcycle that went on sale in 1910 and was an immediate success. By this time, BSA had scaled back bicycle production in favour of motorcycles. The golden decades for BSA motorcycles were the 1950’s and 1960’s.

 

By the late 1960’s, BSA were in decline due to unfavourable financial circumstances and overseas competition, especially from Japanese motorcycle manufacturers. By 1973, BSA’s motorcycle production had come to an end and BSA’s remaining interests were subsumed into the Norton-Villiers-Triumph motorcycle company. Its remaining non-motorcycle businesses were taken over by Manganese Bronze Holdings and who are now a Chinese-owned subsidiary of Geely Holdings.

 

The BSA name in motorcycles was revived in 1997 when BSA Regal Ltd started production of hand-built motorcycles with their 400cc Gold SR and later the more powerful 500cc Gold SR. They also produce a comprehensive range of spare components for older BSA models.

 

If anyone can give me a more precise dating for the issue of these badges, I’d be grateful to hear from you.

 

.

References:

 

www.classic-british-motorcycles.com/bsa-motorcycles.html (Short history of BSA motorcycles).

 

www.theworldofmotorcycles.com/vintage_motorcycle_bsa.html (Main models for BSA motorcycles with photos).

 

en.wikipedia.org/wiki/Birmingham_Small_Arms_Company (The BSA conglomerate of companies. Many non-motorcycles companies were controlled by BSA.)

 

.

Enamels (both badges): 5 (blue, black, red, yellow & white).

Finish: Chrome or tin plated.

Material: Brass.

Fixer: Pin.

Size: 1" diameter (26mm).

Process: Die stamped.

Imprint: No maker’s name or mark.

 

+++ DISCLAIMER +++

Nothing you see here is real, even though the conversion or the presented background story might be based historical facts. BEWARE!

  

Some background:

The Gloster Glaive was basically a modernized and re-engined variant of the successful, British-built Gloster Gladiator (or Gloster SS.37), the RAF’s final biplane fighter to enter service. The Gladiator was not only widely used by the RAF at the dawn of WWII and in almost every theatre of operations, but also by many other nations. Operators included Norway, Belgium, Sweden, Greece, Latvia, Lithuania or Nationalist China, and while the RAF already opted for more modern monoplanes, Gloster saw the opportunity to sell an updated Gladiator to countries which were not as progressive.

Originally designated Gladiator Mk. IV, the machine received many aerodynamic refinements and the motor was changed from a draggy radial to a liquid-cooled inline engine. The latter was the new Rolls Royce Peregrine, a development of the Kestrel. It was, in its original form, a 21-litre (1,300 cu in) liquid-cooled V-12 aero engine ), delivering 885-horsepower (660 kW). The engine was housed under a streamlined cowling, driving a three blade metal propeller, and was coupled with a ventral radiator bath, reminiscent of the Hawker Fury biplane’s arrangement.

 

Structural improvements included an all-metal monocoque fuselage and stabilizers, as well as new wings and streamlined struts with reduced bracing. The upper wing was enlarged and of all-metal construction, too, while the lower wings were reduced in span and area, almost resulting in a sesquiplane layout. The total wing area was only marginally reduced, though.

The fixed landing gear was retained, but the main wheels were now covered with spats. The pilot still sat in a fully enclosed cockpit, the armament consisted of four machine guns, similar to the Gladiator. But for the Glaive, all Browning machine guns were synchronized and mounted in the fuselage: one pair was placed on top of the cowling, in front of the cockpit. Another pair, much like the Gladiator’s arrangement was placed in the fuselage flanks, below the exhaust outlets.

 

Compared with the Gladiator, the design changes were so fundamental that Gloster eventually decided to allocate a separate designation – also with a view to the type’s foreign marketing, since a new aircraft appeared more attractive than another mark of a pre-war design. For the type’s virgin flight in late 1938 the name “Glaive” was unveiled to the public, and several smaller European air forces immediately showed interest, including Greece, Croatia, Turkey, Portugal and Egypt.

 

Greece was one of the initial customers, and the first of a total of 24 aircraft for the Hellenic Air Force was delivered in early 1939, with 24 more on order (which were never delivered, though). The initial batch arrived just in time, since tension had been building between Greece and Italy since 7 April 1939, when Italian troops occupied Albania. On 28 October 1940, Italy issued an ultimatum to Greece, which was promptly rejected. A few hours later, Italian troops launched an invasion of Greece, initiating the Greco-Italian War.

 

The Hellenic Gloster Glaives were split among three Mirae Dioxeos (Fighter Squadrons): the 21st at Trikala, 22nd at Thessaloniki and 23rd at Larissa. When Italy attacked in October 1940, the British fighter was, together with the PZL 24, the Greeks' only modern type in adequate numbers. However, by late 1940, the Gloster Glaive was already no longer a front-runner despite a powerful powerplant and satisfactory armament. It had no speed advantage over the Fiat Cr.42 nor could it outfly the nimble Italian biplane, and it was much slower than the Macchi MC.200 and the Fiat G.50 it was pitted against. Its agility was the only real advantage against the Italian fighters, whose reliance on the slow firing Breda-SAFAT 12.7mm machine guns proved detrimental.

 

Anyway, on 5 April 1941, German forces invaded Greece and quickly established air superiority. As the Allied troops retreated, British and Hellenic forces covered them, before flying to Crete during the last week of April. There, the refugee aircraft recorded a few claims over twin-engine aircraft before being evacuated to Egypt during the Battle of Crete.

 

Overall, the Glaives performed gallantly during the early period of the conflict, holding their own against impossible numerical odds and despite the fact that their main target were enemy bombers which forced them to fight at a disadvantage against enemy fighters. Italian claims of easy superiority over the Albanian front were vastly over-rated and their kill claims even exceeded the total number of operational fighters on the Greek side. Total Greek fighter losses in combat came to 24 a/c with the Greek fighter pilots claiming 64 confirmed kills and 24 probables (about two third bombers).

 

By April 1941, however, lack of spares and attrition had forced the Hellenic Air Force to merge the surviving seven Glaives with five leftover PZL.24s into one understrength squadron supported by five Gloster Gladiators Mk I & II and the two surviving MB.151s. These fought hopelessly against the Luftwaffe onslaught, and most aircraft were eventually lost on the ground. None of the Hellenic Gloster Glaives survived the conflict.

  

General characteristics:

Crew: two

Length: 8.92m (29 ft 3 in)

Wingspan: 34 ft 0 in (10.36 m)

Height: 11 ft 9 in (3.58 m)

Wing area: 317 ft² (29.4 m²)

Empty weight: 1,295 kg (2,855 lb)

Max takeoff weight: 1,700 kg (3,748 lb)

 

Powerplant:

1× Rolls Royce Peregrine II liquid-cooled V12 inline engine, rated at 940 hp (700 kw)

 

Performance:

Maximum speed: 405 km/h (252 mph; 219 kn) at 4,400 m (14,436 ft)

Cruise speed: 345 km/h (214 mph; 186 kn)

Stall speed: 60 mph (52 knots, 96 km/h)

Range: 373 mi (600 km; 324 nmi)

Endurance: 2 hours

Service ceiling: 10,600 m (34,800 ft)

Rate of climb: 2,982 ft/min (15.15 m/s)

Time to altitude: 10.000 ft (3.050 m) in 3 minutes 20 seconds

 

Armament:

4× 0.303 calibre (7.7 mm) M1919 Browning machine guns in the fuselage

Provisions for 6× 10 kg (22 lb) or 4x 20 kg (44 lb) bombs under the lower wings

  

The kit and its assembly:

The fictional Gloster Glaive started quite simple with the idea of replacing the Gladiator’s radial with an inline engine. But this soon did not appear enough for an update – the Peregrine hardly delivered much more power than the former Mercury, so I considered some structural updates, too. Most of them comprised the replacement of former fabric-covered structures, and this led conceptually to a kitbash with only some Gladiator fuselage and tail parts left.

 

The basis is (once more) the very nice Matchbox Gloster Gladiator, but it was heavily modified. As an initial step, fuselage, fin and stabilizers (all OOB parts) lost their rib-and-fabric structure, simply sanded away. A minor detail, but it changes the overall look of the aircraft a lot, making it appear much more modern.

The fuselage was left without the OOB radial, and instead a leftover Merlin front end from an Airfix Hurricane (ca. 1cm long, left over from one of my first whif builds ever, a Hurricane with a radial engine!) was added. The lines match pretty well: the side profile looks sleek, if not elegant, but the Gladiator fuselage turned out to be wider than expected. Some major body work/PSR was necessary to integrate the new nose, but the result looks very good.

 

The liquid-cooled engine necessitated a radiator somewhere on the airframe…! Since I wanted the nose to remain slim and streamlined I eventually placed the radiator bath under the fuselage, much like the arrangement of the Hawker Fury biplane. The radiator itself comes from a late Spitfire (FROG kit).

The exhaust was taken from the Hurricane kit, too, and matching slits dug into the putty nose to take them. The three blade propeller is a mash-up, too: the spinner belongs, IIRC, to an early Spitfire (left over from an AZ Models kit) while the blades came from a damaged Matchbox Brewster Buffalo.

 

The Gladiator’s fuselage flank machine guns were kept and their “bullet channels” extrapolated along the new cowling, running under the new exhaust pipes. Another pair of machine guns were placed on top of the engine – for these, openings were carved into the upper hull and small fairings (similar to the Browning guns in the flanks) added. This arrangement appeared plausible to me, since the Gladiator’s oil cooler was not necessary anymore and the new lower wings (see below) were not big enough anymore to take the Gladiator’s underwing guns. Four MGs in the fuselage appears massive – but there were other types with such an arrangement, e.g. the Avia B-534 with four guns in the flanks and an inline engine.

 

The wings are complete replacements: the upper wing comes from a Heller Curtiss SBC4, while the lower wings as well as the spats (on shortened OOB Gladiator struts) come from an ICM Polikarpov I-153. All struts were scratched. Once the lower wings were in place and the relative position of the upper wing clear, the outer struts were carved from 1mm styrene sheet, using the I-153 design as benchmark. These were glued to the lower wing first, and, once totally dry after 24h, the upper wing was simply glued onto the top and the wing position adjusted. This was left to dry another 24h, and as a final step the four struts above the cowling (using the OOB struts, but as single parts and trimmed for proper fit) were placed. This way, a stable connection is guaranteed – and the result is surprisingly sturdy.

 

Rigging was done with heated sprue material – my personal favorite for this delicate task, and executed before painting the kit started so that the glue could cure and bond well.

  

Painting and markings:

The reason why this aircraft ended in Greek service is a color photograph of a crashed Hellenic Bloch M.B. 152 (coded ‘D 177’, to be specific). I guess that the picture was post-colored, though, because the aircraft of French origin sports rather weird colors: the picture shows a two-tone scheme in a deep, rather reddish chestnut brown and a light green that almost looks like teal. Unique, to say the least... Underside colors couldn’t be identified with certainty in the picture, but appeared like a pale but not too light blue grey.

 

Anyway, I assume that these colors are pure fiction and exaggerated Photoshop work, since the few M.B. 152s delivered to Greece carried AFAIK standard French camouflage (in French Khaki, Chestnut Brown and Blue-Grey on the upper surfaces, and a very light blue-grey from below). I’d assume that the contrast between the grey and green tones was not very obvious in the original photograph, so that the artist, not familiar with WWII paint schemes, replaced both colors with the strange teal tone and massively overmodulated the brown.

 

As weird as it looked, I liked this design and used it as an inspirational benchmark for my Hellenic Glaive build. After all, it’s a fictional aircraft… Upper basic colors are Humbrol 31 (RAF Slate Grey) and 160 (German Camouflage Red Brown), while the undersides became French Dark Blue Grey (ModelMaster Authentics 2105). The result looks rather odd…

Representing a combat-worn aircraft, I applied a thorough black ink wash and did heavier panel shading and dry-brushing on the leading edges, along with some visible touches of aluminum.

 

The Hellenic roundels come from a TL Modellbau aftermarket sheet. The tactical code was puzzled together from single letters, and the Greek “D” was created from single decal strips. For better contrast I used white decals – most Hellenic aircraft of the time had black codes, but the contrast is much better, and I found evidence that some machines actually carried white codes. The small fin flash is another free interpretation. Not every Hellenic aircraft carried these markings, and instead of painting the whole rudder in Greek colors I just applied a small fin flash. This was created with white and blue decal strips, closely matching the roundels’ colors.

 

Finally, after some soot stains around the guns and the exhausts, the kit was sealed with matt acrylic varnish.

  

Modified beyond recognition, perhaps…? The fictional Gloster Glaive looks IMHO good and very modern, just like one of those final biplane designs that were about to be outrun by monoplanes at the brink of WWII.

 

The Taj Mahal (/ˌtɑːdʒ məˈhɑːl/, more often /ˈtɑːʒ/; from Persian and Arabic, "crown of palaces", pronounced [ˈt̪aːdʒ mɛˈɦɛl]) is a white marble mausoleum located on the southern bank of Yamuna River in the Indian city of Agra. It was commissioned in 1632 by the Mughal emperor Shah Jahan (reigned 1628–1658) to house the tomb of his favorite wife of three, Mumtaz Mahal.

 

Construction of the mausoleum was essentially completed in 1643 but work continued on other phases of the project for an additional ten years. The Taj Mahal complex is believed to have been completed in its entirety in 1653 at a cost estimated at the time to be around 32 million Indian rupees, which in 2015 would be valued at around 52.8 billion Indian rupees ($827 million US). The construction project employed around 20,000 artisans under the guidance of a board of architects led by Ustad Ahmad Lahauri. The domed marble tomb is part of an integrated complex consisting of gardens and two red-sandstone buildings surrounded by a crenellated wall on three sides.

 

The Taj Mahal is regarded by many as the best example of Mughal architecture and is widely recognized as "the jewel of Muslim art in India". It is one of the world’s most celebrated structures and a symbol of India’s rich history. Designated a UNESCO World Heritage Site in 1983, the Taj Mahal attracts some 3 million visitors a year.

 

INSPIRATION

In 1631, Shah Jahan, emperor during the Mughal empire's period of greatest prosperity, was grief-stricken when his favorite of three wives and beloved companion, Mumtaz Mahal, a Persian princess, died during the birth of their 14th child, Gauhara Begum. Construction of the Taj Mahal began in 1632. The court chronicles of Shah Jahan's grief illustrate the love story traditionally held as an inspiration for Taj Mahal. The principal mausoleum was completed in 1643 and the surrounding buildings and garden were finished about five years later.

 

ARCHITECTURE AND DESIGN

The Taj Mahal incorporates and expands on design traditions of Persian and earlier Mughal architecture. Specific inspiration came from successful Timurid and Mughal buildings including; the Gur-e Amir (the tomb of Timur, progenitor of the Mughal dynasty, in Samarkand), Humayun's Tomb, Itmad-Ud-Daulah's Tomb (sometimes called the Baby Taj), and Shah Jahan's own Jama Masjid in Delhi. While earlier Mughal buildings were primarily constructed of red sandstone, Shah Jahan promoted the use of white marble inlaid with semi-precious stones. Buildings under his patronage reached new levels of refinement.

 

TOMB

The tomb is the central focus of the entire complex of the Taj Mahal. It is a large, white marble structure standing on a square plinth and consists of a symmetrical building with an iwan (an arch-shaped doorway) topped by a large dome and finial. Like most Mughal tombs, the basic elements are Persian in origin.

 

The base structure is a large multi-chambered cube with chamfered corners forming an unequal eight-sided structure that is approximately 55 metres on each of the four long sides. Each side of the iwan is framed with a huge pishtaq or vaulted archway with two similarly shaped arched balconies stacked on either side. This motif of stacked pishtaqs is replicated on the chamfered corner areas, making the design completely symmetrical on all sides of the building. Four minarets frame the tomb, one at each corner of the plinth facing the chamfered corners. The main chamber houses the false sarcophagi of Mumtaz Mahal and Shah Jahan; the actual graves are at a lower level.

 

The most spectacular feature is the marble dome that surmounts the tomb. The dome is nearly 35 metres high which is close in measurement to the length of the base, and accentuated by the cylindrical "drum" it sits on which is approximately 7 metres high. Because of its shape, the dome is often called an onion dome or amrud (guava dome). The top is decorated with a lotus design which also serves to accentuate its height. The shape of the dome is emphasized by four smaller domed chattris (kiosks) placed at its corners, which replicate the onion shape of the main dome. Their columned bases open through the roof of the tomb and provide light to the interior. Tall decorative spires (guldastas) extend from edges of base walls, and provide visual emphasis to the height of the dome. The lotus motif is repeated on both the chattris and guldastas. The dome and chattris are topped by a gilded finial which mixes traditional Persian and Hindustani decorative elements.

 

The main finial was originally made of gold but was replaced by a copy made of gilded bronze in the early 19th century. This feature provides a clear example of integration of traditional Persian and Hindu decorative elements. The finial is topped by a moon, a typical Islamic motif whose horns point heavenward.

 

The minarets, which are each more than 40 metres tall, display the designer's penchant for symmetry. They were designed as working minarets - a traditional element of mosques, used by the muezzin to call the Islamic faithful to prayer. Each minaret is effectively divided into three equal parts by two working balconies that ring the tower. At the top of the tower is a final balcony surmounted by a chattri that mirrors the design of those on the tomb. The chattris all share the same decorative elements of a lotus design topped by a gilded finial. The minarets were constructed slightly outside of the plinth so that in the event of collapse, a typical occurrence with many tall constructions of the period, the material from the towers would tend to fall away from the tomb.

 

EXTERIOR DECORATIONS

The exterior decorations of the Taj Mahal are among the finest in Mughal architecture. As the surface area changes, the decorations are refined proportionally. The decorative elements were created by applying paint, stucco, stone inlays or carvings. In line with the Islamic prohibition against the use of anthropomorphic forms, the decorative elements can be grouped into either calligraphy, abstract forms or vegetative motifs. Throughout the complex are passages from the Qur'an that comprise some of the decorative elements. Recent scholarship suggests that the passages were chosen by Amanat Khan.

 

The calligraphy on the Great Gate reads "O Soul, thou art at rest. Return to the Lord at peace with Him, and He at peace with you." The calligraphy was created in 1609 by a calligrapher named Abdul Haq. Shah Jahan conferred the title of "Amanat Khan" upon him as a reward for his "dazzling virtuosity". Near the lines from the Qur'an at the base of the interior dome is the inscription, "Written by the insignificant being, Amanat Khan Shirazi." Much of the calligraphy is composed of florid thuluth script made of jasper or black marble inlaid in white marble panels. Higher panels are written in slightly larger script to reduce the skewing effect when viewed from below. The calligraphy found on the marble cenotaphs in the tomb is particularly detailed and delicate.

 

Abstract forms are used throughout, especially in the plinth, minarets, gateway, mosque, jawab and, to a lesser extent, on the surfaces of the tomb. The domes and vaults of the sandstone buildings are worked with tracery of incised painting to create elaborate geometric forms. Herringbone inlays define the space between many of the adjoining elements. White inlays are used in sandstone buildings, and dark or black inlays on the white marbles. Mortared areas of the marble buildings have been stained or painted in a contrasting color which creates a complex array of geometric patterns. Floors and walkways use contrasting tiles or blocks in tessellation patterns.

 

On the lower walls of the tomb are white marble dados sculpted with realistic bas relief depictions of flowers and vines. The marble has been polished to emphasise the exquisite detailing of the carvings. The dado frames and archway spandrels have been decorated with pietra dura inlays of highly stylised, almost geometric vines, flowers and fruits. The inlay stones are of yellow marble, jasper and jade, polished and levelled to the surface of the walls.

 

INTERIOR DECORATION

The interior chamber of the Taj Mahal reaches far beyond traditional decorative elements. The inlay work is not pietra dura, but a lapidary of precious and semiprecious gemstones. The inner chamber is an octagon with the design allowing for entry from each face, although only the door facing the garden to the south is used. The interior walls are about 25 metres high and are topped by a "false" interior dome decorated with a sun motif. Eight pishtaq arches define the space at ground level and, as with the exterior, each lower pishtaq is crowned by a second pishtaq about midway up the wall. The four central upper arches form balconies or viewing areas, and each balcony's exterior window has an intricate screen or jali cut from marble. In addition to the light from the balcony screens, light enters through roof openings covered by chattris at the corners. The octagonal marble screen or jali bordering the cenotaphs is made from eight marble panels carved through with intricate pierce work. The remaining surfaces are inlaid in delicate detail with semi-precious stones forming twining vines, fruits and flowers. Each chamber wall is highly decorated with dado bas-relief, intricate lapidary inlay and refined calligraphy panels which reflect, in miniature detail, the design elements seen throughout the exterior of the complex.

 

Muslim tradition forbids elaborate decoration of graves. Hence, the bodies of Mumtaz and Shah Jahan were put in a relatively plain crypt beneath the inner chamber with their faces turned right, towards Mecca. Mumtaz Mahal's cenotaph is placed at the precise centre of the inner chamber on a rectangular marble base of 1.5 by 2.5 metres. Both the base and casket are elaborately inlaid with precious and semiprecious gems. Calligraphic inscriptions on the casket identify and praise Mumtaz. On the lid of the casket is a raised rectangular lozenge meant to suggest a writing tablet. Shah Jahan's cenotaph is beside Mumtaz's to the western side, and is the only visible asymmetric element in the entire complex. His cenotaph is bigger than his wife's, but reflects the same elements: a larger casket on a slightly taller base precisely decorated with lapidary and calligraphy that identifies him. On the lid of the casket is a traditional sculpture of a small pen box.

 

The pen box and writing tablet are traditional Mughal funerary icons decorating the caskets of men and women respectively. The Ninety Nine Names of God are calligraphic inscriptions on the sides of the actual tomb of Mumtaz Mahal. Other inscriptions inside the crypt include, "O Noble, O Magnificent, O Majestic, O Unique, O Eternal, O Glorious... ". The tomb of Shah Jahan bears a calligraphic inscription that reads; "He travelled from this world to the banquet-hall of Eternity on the night of the twenty-sixth of the month of Rajab, in the year 1076 Hijri."

 

GARDEN

The complex is set around a large 300-metre square charbagh or Mughal garden. The garden uses raised pathways that divide each of the four quarters of the garden into 16 sunken parterres or flowerbeds. Halfway between the tomb and gateway in the center of the garden is a raised marble water tank with a reflecting pool positioned on a north-south axis to reflect the image of the mausoleum. The raised marble water tank is called al Hawd al-Kawthar in reference to the "Tank of Abundance" promised to Muhammad.

 

Elsewhere, the garden is laid out with avenues of trees and fountains. The charbagh garden, a design inspired by Persian gardens, was introduced to India by Babur, the first Mughal emperor. It symbolises the four flowing rivers of Jannah (Paradise) and reflects the Paradise garden derived from the Persian paridaeza, meaning 'walled garden'. In mystic Islamic texts of the Mughal period, Paradise is described as an ideal garden of abundance with four rivers flowing from a central spring or mountain, separating the garden into north, west, south and east.

 

Most Mughal charbaghs are rectangular with a tomb or pavilion in the center. The Taj Mahal garden is unusual in that the main element, the tomb, is located at the end of the garden. With the discovery of Mahtab Bagh or "Moonlight Garden" on the other side of the Yamuna, the interpretation of the Archaeological Survey of India is that the Yamuna river itself was incorporated into the garden's design and was meant to be seen as one of the rivers of Paradise. Similarities in layout and architectural features with the Shalimar Gardens suggests both gardens may have been designed by the same architect, Ali Mardan. Early accounts of the garden describe its profusion of vegetation, including abundant roses, daffodils, and fruit trees. As the Mughal Empire declined, the Taj Mahal and its gardens also declined. By the end of the 19th century, the British Empire controlled more than three-fifths of India, and assumed management of the Taj Mahal. They changed the landscaping to their liking which more closely resembled the formal lawns of London.

 

OUTLYING BUILDINGS

The Taj Mahal complex is bordered on three sides by crenellated red sandstone walls; the side facing the river is open. Outside the walls are several additional mausoleums, including those of Shah Jahan's other wives, and a larger tomb for Mumtaz's favourite servant.

 

The main gateway (darwaza) is a monumental structure built primarily of marble, and reminiscent of the Mughal architecture of earlier emperors. Its archways mirror the shape of the tomb's archways, and its pishtaq arches incorporate the calligraphy that decorates the tomb. The vaulted ceilings and walls have elaborate geometric designs like those found in the other sandstone buildings in the complex.

 

At the far end of the complex are two grand red sandstone buildings that mirror each other, and face the sides of the tomb. The backs of the buildings parallel the western and eastern walls. The western building is a mosque and the other is the jawab (answer), thought to have been constructed for architectural balance although it may have been used as a guesthouse. Distinctions between the two buildings include the jawab's lack of a mihrab (a niche in a mosque's wall facing Mecca), and its floors of geometric design whereas the floor of the mosque is laid with outlines of 569 prayer rugs in black marble. The mosque's basic design of a long hall surmounted by three domes is similar to others built by Shah Jahan, particularly the Masjid-i Jahān-Numā, or Jama Masjid, Delhi. The Mughal mosques of this period divide the sanctuary hall into three areas comprising a main sanctuary and slightly smaller sanctuaries on either side. At the Taj Mahal, each sanctuary opens onto an expansive vaulting dome. The outlying buildings were completed in 1643.

 

CONSTRUCTION

The Taj Mahal is built on a parcel of land to the south of the walled city of Agra. Shah Jahan presented Maharajah Jai Singh with a large palace in the center of Agra in exchange for the land. An area of roughly three acres was excavated, filled with dirt to reduce seepage, and leveled at 50 metres above riverbank. In the tomb area, wells were dug and filled with stone and rubble to form the footings of the tomb. Instead of lashed bamboo, workmen constructed a colossal brick scaffold that mirrored the tomb. The scaffold was so enormous that foremen estimated it would take years to dismantle.

 

The Taj Mahal was constructed using materials from all over India and Asia. It is believed over 1,000 elephants were used to transport building materials. The translucent white marble was brought from Makrana, Rajasthan, the jasper from Punjab, jade and crystal from China. The turquoise was from Tibet and the Lapis lazuli from Afghanistan, while the sapphire came from Sri Lanka and the carnelian from Arabia. In all, twenty eight types of precious and semi-precious stones were inlaid into the white marble.

 

According to the legend, Shah Jahan decreed that anyone could keep the bricks taken from the scaffold, and thus it was dismantled by peasants overnight. A fifteen kilometer tamped-earth ramp was built to transport marble and materials to the construction site and teams of twenty or thirty oxen pulled the blocks on specially constructed wagons. An elaborate post-and-beam pulley system was used to raise the blocks into desired position. Water was drawn from the river by a series of purs, an animal-powered rope and bucket mechanism, into a large storage tank and raised to a large distribution tank. It was passed into three subsidiary tanks, from which it was piped to the complex.

 

The plinth and tomb took roughly 12 years to complete. The remaining parts of the complex took an additional 10 years and were completed in order of minarets, mosque and jawab, and gateway. Since the complex was built in stages, discrepancies exist in completion dates due to differing opinions on "completion". Construction of the mausoleum itself was essentially completed by 1643 while work continued on the outlying buildings. Estimates of the cost of construction vary due to difficulties in estimating costs across time. The total cost has been estimated to be about 32 million Indian rupees, which is around 52.8 billion Indian rupees ($827 million US) based on 2015 values.

 

LATER DAYS

Abdul Hamid Lahauri in his book Badshahnama refers to Taj Mahal as rauza-i munawwara, meaning the illumined or illustrious tomb. Soon after the Taj Mahal's completion, Shah Jahan was deposed by his son Aurangzeb and put under house arrest at nearby Agra Fort. Upon Shah Jahan's death, Aurangzeb buried him in the mausoleum next to his wife. In the 18th century, the Jat rulers of Bharatpur invaded Agra and attacked the Taj Mahal, the two chandeliers, one of agate and another of silver, which were hung over the main cenotaph, were taken away by them, along with the gold and silver screen. Kanbo, a Mughal historian, said the gold shield which covered the 15-foot high finial at the top of the main dome was also removed during the Jat despoliation.

 

By the late 19th century, parts of the buildings had fallen into disrepair. During the time of the Indian rebellion of 1857, the Taj Mahal was defaced by British soldiers and government officials, who chiselled out precious stones and lapis lazuli from its walls. At the end of the 19th century, British viceroy Lord Curzon ordered a sweeping restoration project, which was completed in 1908. He also commissioned the large lamp in the interior chamber, modelled after one in a Cairo mosque. During this time the garden was remodelled with British-style lawns that are still in place today.

 

THREATS

In 1942, the government erected a scaffolding to disguise the building in anticipation of air attacks by the Japanese Air Force. During the India-Pakistan wars of 1965 and 1971, scaffoldings were again erected to mislead bomber pilots.

 

More recent threats have come from environmental pollution on the banks of Yamuna River including acid rain due to the Mathura Oil Refinery, which was opposed by Supreme Court of India directives. The pollution has been turning the Taj Mahal yellow. To help control the pollution, the Indian government has set up the Taj Trapezium Zone (TTZ), a 10,400-square-kilometre area around the monument where strict emissions standards are in place.

 

Concerns for the tomb's structural integrity have recently been raised because of a decline in the groundwater level in the Yamuna river basin which is falling at a rate of around 5 feet a year. In 2010, cracks appeared in parts of the tomb, and the minarets which surround the monument were showing signs of tilting, as the wooden foundation of the tomb may be rotting due to lack of water. In 2011 it was reported that some predictions indicated that the tomb could collapse within 5 years.

 

TOURISM

The Taj Mahal attracts a large number of tourists. UNESCO documented more than 2 million visitors in 2001, which increased to about 3 million in 2015. A two tier pricing system is in place, with a significantly lower entrance fee for Indian citizens and a more expensive one for foreigners. Most tourists visit in the cooler months of October, November and February. Polluting traffic is not allowed near the complex and tourists must either walk from parking lots or catch an electric bus. The Khawasspuras (northern courtyards) are currently being restored for use as a new visitor center.

 

The small town to the south of the Taj, known as Taj Ganji or Mumtazabad, was originally constructed with caravanserais, bazaars and markets to serve the needs of visitors and workmen. Lists of recommended travel destinations often feature the Taj Mahal, which also appears in several listings of seven wonders of the modern world, including the recently announced New Seven Wonders of the World, a recent poll with 100 million votes.

 

The grounds are open from 06:00 to 19:00 weekdays, except for Friday when the complex is open for prayers at the mosque between 12:00 and 14:00. The complex is open for night viewing on the day of the full moon and two days before and after, excluding Fridays and the month of Ramadan. For security reasons only five items - water in transparent bottles, small video cameras, still cameras, mobile phones and small ladies' purses - are allowed inside the Taj Mahal.

 

MYTHS

Ever since its construction, the building has been the source of an admiration transcending culture and geography, and so personal and emotional responses have consistently eclipsed scholastic appraisals of the monument. A longstanding myth holds that Shah Jahan planned a mausoleum to be built in black marble as a Black Taj Mahal across the Yamuna river. The idea originates from fanciful writings of Jean-Baptiste Tavernier, a European traveller who visited Agra in 1665. It was suggested that Shah Jahan was overthrown by his son Aurangzeb before it could be built. Ruins of blackened marble across the river in Moonlight Garden, Mahtab Bagh, seemed to support this legend. However, excavations carried out in the 1990s found that they were discolored white stones that had turned black. A more credible theory for the origins of the black mausoleum was demonstrated in 2006 by archaeologists who reconstructed part of the pool in the Moonlight Garden. A dark reflection of the white mausoleum could clearly be seen, befitting Shah Jahan's obsession with symmetry and the positioning of the pool itself.

 

No evidence exists for claims that describe, often in horrific detail, the deaths, dismemberments and mutilations which Shah Jahan supposedly inflicted on various architects and craftsmen associated with the tomb. Some stories claim that those involved in construction signed contracts committing themselves to have no part in any similar design. Similar claims are made for many famous buildings. No evidence exists for claims that Lord William Bentinck, governor-general of India in the 1830s, supposedly planned to demolish the Taj Mahal and auction off the marble. Bentinck's biographer John Rosselli says that the story arose from Bentinck's fund-raising sale of discarded marble from Agra Fort.

 

Another myth suggests that beating the silhouette of the finial will cause water to come forth. To this day, officials find broken bangles surrounding the silhouette.

 

In 2000, India's Supreme Court dismissed P. N. Oak's petition to declare that a Hindu king built the Taj Mahal. In 2005 a similar petition was dismissed by the Allahabad High Court. This case was brought by Amar Nath Mishra, a social worker and preacher who says that the Taj Mahal was built by the Hindu King Parmar Dev in 1196.

 

WIKIPEDIA

Hill Aerospace Museum

 

The AIRS (Advanced Inertial Reference Sphere) is the most accurate inertial navigation (INS) system ever developed, and perhaps marks the end of a long process of continuous refinement of INS technology. The AIRS was designed for use in the LGM-118A Peacekeeper ICBM.

 

The most novel aspect of the AIRS is that it has no gimbals. Gimbals are pivots that are provided for each of three spatial axes so that the guidance platform can move freely in all directions (and thus maintain its absolute alignment with the outside world). The AIRS consists of a beryllium sphere that floats in a fluorocarbon fluid within an outer shell and can thus rotate in any direction. The importance of this innovation is that it eliminates the possibility of gimbal lock (where the axes of two gimbals line up and destroy the three-dimensional freedom of motion), and is free from arbitrary limits to range of motion found in some gimbal designs.

 

The temperature of the fluid is controlled with extreme accuracy by transfer of heat from the fluid through "Power shells" to freon-cooled heat exchangers. The alignment of the sphere is controlled by three hydraulic thrust valves directed by the inertial sensors in the sphere.

 

Like other INS systems, the sphere houses three accelerometers and three gyroscopes. The accelerometer design is called a SFIR (specific force integrating reciever). This is essentially the same approach as the pendulous integrating gyro accelerometer (of PIGA) used in the Minuteman II. The SFIR/PIGA works by measuring the rate of precession (and thus force applied) to a gyroscope at right angles to its axis of rotation. The gyroscope is a floated gas bearing gyroscope design.

Turkey 2012, Istanbul. Walking through St. Sophia: the greatness of Rome together with the refinement Byzantine and Eastern have been able to create one of the finest examples of art

+++ DISCLAIMER +++

Nothing you see here is real, even though the conversion or the presented background story might be based historical facts. BEWARE!

  

Some background:

The Gloster Glaive was basically a modernized and re-engined variant of the successful, British-built Gloster Gladiator (or Gloster SS.37), the RAF’s final biplane fighter to enter service. The Gladiator was not only widely used by the RAF at the dawn of WWII and in almost every theatre of operations, but also by many other nations. Operators included Norway, Belgium, Sweden, Greece, Latvia, Lithuania or Nationalist China, and while the RAF already opted for more modern monoplanes, Gloster saw the opportunity to sell an updated Gladiator to countries which were not as progressive.

Originally designated Gladiator Mk. IV, the machine received many aerodynamic refinements and the motor was changed from a draggy radial to a liquid-cooled inline engine. The latter was the new Rolls Royce Peregrine, a development of the Kestrel. It was, in its original form, a 21-litre (1,300 cu in) liquid-cooled V-12 aero engine ), delivering 885-horsepower (660 kW). The engine was housed under a streamlined cowling, driving a three blade metal propeller, and was coupled with a ventral radiator bath, reminiscent of the Hawker Fury biplane’s arrangement.

 

Structural improvements included an all-metal monocoque fuselage and stabilizers, as well as new wings and streamlined struts with reduced bracing. The upper wing was enlarged and of all-metal construction, too, while the lower wings were reduced in span and area, almost resulting in a sesquiplane layout. The total wing area was only marginally reduced, though.

The fixed landing gear was retained, but the main wheels were now covered with spats. The pilot still sat in a fully enclosed cockpit, the armament consisted of four machine guns, similar to the Gladiator. But for the Glaive, all Browning machine guns were synchronized and mounted in the fuselage: one pair was placed on top of the cowling, in front of the cockpit. Another pair, much like the Gladiator’s arrangement was placed in the fuselage flanks, below the exhaust outlets.

 

Compared with the Gladiator, the design changes were so fundamental that Gloster eventually decided to allocate a separate designation – also with a view to the type’s foreign marketing, since a new aircraft appeared more attractive than another mark of a pre-war design. For the type’s virgin flight in late 1938 the name “Glaive” was unveiled to the public, and several smaller European air forces immediately showed interest, including Greece, Croatia, Turkey, Portugal and Egypt.

 

Greece was one of the initial customers, and the first of a total of 24 aircraft for the Hellenic Air Force was delivered in early 1939, with 24 more on order (which were never delivered, though). The initial batch arrived just in time, since tension had been building between Greece and Italy since 7 April 1939, when Italian troops occupied Albania. On 28 October 1940, Italy issued an ultimatum to Greece, which was promptly rejected. A few hours later, Italian troops launched an invasion of Greece, initiating the Greco-Italian War.

 

The Hellenic Gloster Glaives were split among three Mirae Dioxeos (Fighter Squadrons): the 21st at Trikala, 22nd at Thessaloniki and 23rd at Larissa. When Italy attacked in October 1940, the British fighter was, together with the PZL 24, the Greeks' only modern type in adequate numbers. However, by late 1940, the Gloster Glaive was already no longer a front-runner despite a powerful powerplant and satisfactory armament. It had no speed advantage over the Fiat Cr.42 nor could it outfly the nimble Italian biplane, and it was much slower than the Macchi MC.200 and the Fiat G.50 it was pitted against. Its agility was the only real advantage against the Italian fighters, whose reliance on the slow firing Breda-SAFAT 12.7mm machine guns proved detrimental.

 

Anyway, on 5 April 1941, German forces invaded Greece and quickly established air superiority. As the Allied troops retreated, British and Hellenic forces covered them, before flying to Crete during the last week of April. There, the refugee aircraft recorded a few claims over twin-engine aircraft before being evacuated to Egypt during the Battle of Crete.

 

Overall, the Glaives performed gallantly during the early period of the conflict, holding their own against impossible numerical odds and despite the fact that their main target were enemy bombers which forced them to fight at a disadvantage against enemy fighters. Italian claims of easy superiority over the Albanian front were vastly over-rated and their kill claims even exceeded the total number of operational fighters on the Greek side. Total Greek fighter losses in combat came to 24 a/c with the Greek fighter pilots claiming 64 confirmed kills and 24 probables (about two third bombers).

 

By April 1941, however, lack of spares and attrition had forced the Hellenic Air Force to merge the surviving seven Glaives with five leftover PZL.24s into one understrength squadron supported by five Gloster Gladiators Mk I & II and the two surviving MB.151s. These fought hopelessly against the Luftwaffe onslaught, and most aircraft were eventually lost on the ground. None of the Hellenic Gloster Glaives survived the conflict.

  

General characteristics:

Crew: two

Length: 8.92m (29 ft 3 in)

Wingspan: 34 ft 0 in (10.36 m)

Height: 11 ft 9 in (3.58 m)

Wing area: 317 ft² (29.4 m²)

Empty weight: 1,295 kg (2,855 lb)

Max takeoff weight: 1,700 kg (3,748 lb)

 

Powerplant:

1× Rolls Royce Peregrine II liquid-cooled V12 inline engine, rated at 940 hp (700 kw)

 

Performance:

Maximum speed: 405 km/h (252 mph; 219 kn) at 4,400 m (14,436 ft)

Cruise speed: 345 km/h (214 mph; 186 kn)

Stall speed: 60 mph (52 knots, 96 km/h)

Range: 373 mi (600 km; 324 nmi)

Endurance: 2 hours

Service ceiling: 10,600 m (34,800 ft)

Rate of climb: 2,982 ft/min (15.15 m/s)

Time to altitude: 10.000 ft (3.050 m) in 3 minutes 20 seconds

 

Armament:

4× 0.303 calibre (7.7 mm) M1919 Browning machine guns in the fuselage

Provisions for 6× 10 kg (22 lb) or 4x 20 kg (44 lb) bombs under the lower wings

  

The kit and its assembly:

The fictional Gloster Glaive started quite simple with the idea of replacing the Gladiator’s radial with an inline engine. But this soon did not appear enough for an update – the Peregrine hardly delivered much more power than the former Mercury, so I considered some structural updates, too. Most of them comprised the replacement of former fabric-covered structures, and this led conceptually to a kitbash with only some Gladiator fuselage and tail parts left.

 

The basis is (once more) the very nice Matchbox Gloster Gladiator, but it was heavily modified. As an initial step, fuselage, fin and stabilizers (all OOB parts) lost their rib-and-fabric structure, simply sanded away. A minor detail, but it changes the overall look of the aircraft a lot, making it appear much more modern.

The fuselage was left without the OOB radial, and instead a leftover Merlin front end from an Airfix Hurricane (ca. 1cm long, left over from one of my first whif builds ever, a Hurricane with a radial engine!) was added. The lines match pretty well: the side profile looks sleek, if not elegant, but the Gladiator fuselage turned out to be wider than expected. Some major body work/PSR was necessary to integrate the new nose, but the result looks very good.

 

The liquid-cooled engine necessitated a radiator somewhere on the airframe…! Since I wanted the nose to remain slim and streamlined I eventually placed the radiator bath under the fuselage, much like the arrangement of the Hawker Fury biplane. The radiator itself comes from a late Spitfire (FROG kit).

The exhaust was taken from the Hurricane kit, too, and matching slits dug into the putty nose to take them. The three blade propeller is a mash-up, too: the spinner belongs, IIRC, to an early Spitfire (left over from an AZ Models kit) while the blades came from a damaged Matchbox Brewster Buffalo.

 

The Gladiator’s fuselage flank machine guns were kept and their “bullet channels” extrapolated along the new cowling, running under the new exhaust pipes. Another pair of machine guns were placed on top of the engine – for these, openings were carved into the upper hull and small fairings (similar to the Browning guns in the flanks) added. This arrangement appeared plausible to me, since the Gladiator’s oil cooler was not necessary anymore and the new lower wings (see below) were not big enough anymore to take the Gladiator’s underwing guns. Four MGs in the fuselage appears massive – but there were other types with such an arrangement, e.g. the Avia B-534 with four guns in the flanks and an inline engine.

 

The wings are complete replacements: the upper wing comes from a Heller Curtiss SBC4, while the lower wings as well as the spats (on shortened OOB Gladiator struts) come from an ICM Polikarpov I-153. All struts were scratched. Once the lower wings were in place and the relative position of the upper wing clear, the outer struts were carved from 1mm styrene sheet, using the I-153 design as benchmark. These were glued to the lower wing first, and, once totally dry after 24h, the upper wing was simply glued onto the top and the wing position adjusted. This was left to dry another 24h, and as a final step the four struts above the cowling (using the OOB struts, but as single parts and trimmed for proper fit) were placed. This way, a stable connection is guaranteed – and the result is surprisingly sturdy.

 

Rigging was done with heated sprue material – my personal favorite for this delicate task, and executed before painting the kit started so that the glue could cure and bond well.

  

Painting and markings:

The reason why this aircraft ended in Greek service is a color photograph of a crashed Hellenic Bloch M.B. 152 (coded ‘D 177’, to be specific). I guess that the picture was post-colored, though, because the aircraft of French origin sports rather weird colors: the picture shows a two-tone scheme in a deep, rather reddish chestnut brown and a light green that almost looks like teal. Unique, to say the least... Underside colors couldn’t be identified with certainty in the picture, but appeared like a pale but not too light blue grey.

 

Anyway, I assume that these colors are pure fiction and exaggerated Photoshop work, since the few M.B. 152s delivered to Greece carried AFAIK standard French camouflage (in French Khaki, Chestnut Brown and Blue-Grey on the upper surfaces, and a very light blue-grey from below). I’d assume that the contrast between the grey and green tones was not very obvious in the original photograph, so that the artist, not familiar with WWII paint schemes, replaced both colors with the strange teal tone and massively overmodulated the brown.

 

As weird as it looked, I liked this design and used it as an inspirational benchmark for my Hellenic Glaive build. After all, it’s a fictional aircraft… Upper basic colors are Humbrol 31 (RAF Slate Grey) and 160 (German Camouflage Red Brown), while the undersides became French Dark Blue Grey (ModelMaster Authentics 2105). The result looks rather odd…

Representing a combat-worn aircraft, I applied a thorough black ink wash and did heavier panel shading and dry-brushing on the leading edges, along with some visible touches of aluminum.

 

The Hellenic roundels come from a TL Modellbau aftermarket sheet. The tactical code was puzzled together from single letters, and the Greek “D” was created from single decal strips. For better contrast I used white decals – most Hellenic aircraft of the time had black codes, but the contrast is much better, and I found evidence that some machines actually carried white codes. The small fin flash is another free interpretation. Not every Hellenic aircraft carried these markings, and instead of painting the whole rudder in Greek colors I just applied a small fin flash. This was created with white and blue decal strips, closely matching the roundels’ colors.

 

Finally, after some soot stains around the guns and the exhausts, the kit was sealed with matt acrylic varnish.

  

Modified beyond recognition, perhaps…? The fictional Gloster Glaive looks IMHO good and very modern, just like one of those final biplane designs that were about to be outrun by monoplanes at the brink of WWII.

 

A ViTrains class 47, with a few refinements.

 

It was a fiddly job, as the handrails, wipers, NRN aerial etc arent fitted and you have to fit them yourself, from frets supplied in the detail bag.

 

As usual, Ive used a mixture of Heljan, Bachmann and Hornby pipes and fittings on the bufferbeams.

 

The Shawplan nameplates and plaques that I had were fitted too. These make all the difference.

 

I had taken the bogie frames off, removed the wheels and had sprayed these individually, ensuring no half weathered wheels!

 

Next up - weathering.

Luxury automotive manufacturer Jaguar Land Rover today revealed a sneak preview of the next generation of its technologically advanced vehicles at the Dubai International Motor Show.

Visitors to the five day motor show are among the first in the world to get up close and personal with Land Rover’s exclusive Range Rover Autobiography Black Edition – the pinnacle of desirability that brings even higher levels of refinement to the world’s finest and most capable luxury SUV.

Land Rover and renowned Magnum photographer Jonas Bendiksen have revealed the first in a series of unique works entitled ‘Ultimate Vistas’, extraordinary landscape photographs captured with help from the world’s ultimate SUV: the Range Rover.

+++ DISCLAIMER +++

Nothing you see here is real, even though the conversion or the presented background story might be based historical facts. BEWARE!

  

Some background:

The Gloster Glaive was basically a modernized and re-engined variant of the successful, British-built Gloster Gladiator (or Gloster SS.37), the RAF’s final biplane fighter to enter service. The Gladiator was not only widely used by the RAF at the dawn of WWII and in almost every theatre of operations, but also by many other nations. Operators included Norway, Belgium, Sweden, Greece, Latvia, Lithuania or Nationalist China, and while the RAF already opted for more modern monoplanes, Gloster saw the opportunity to sell an updated Gladiator to countries which were not as progressive.

Originally designated Gladiator Mk. IV, the machine received many aerodynamic refinements and the motor was changed from a draggy radial to a liquid-cooled inline engine. The latter was the new Rolls Royce Peregrine, a development of the Kestrel. It was, in its original form, a 21-litre (1,300 cu in) liquid-cooled V-12 aero engine ), delivering 885-horsepower (660 kW). The engine was housed under a streamlined cowling, driving a three blade metal propeller, and was coupled with a ventral radiator bath, reminiscent of the Hawker Fury biplane’s arrangement.

 

Structural improvements included an all-metal monocoque fuselage and stabilizers, as well as new wings and streamlined struts with reduced bracing. The upper wing was enlarged and of all-metal construction, too, while the lower wings were reduced in span and area, almost resulting in a sesquiplane layout. The total wing area was only marginally reduced, though.

The fixed landing gear was retained, but the main wheels were now covered with spats. The pilot still sat in a fully enclosed cockpit, the armament consisted of four machine guns, similar to the Gladiator. But for the Glaive, all Browning machine guns were synchronized and mounted in the fuselage: one pair was placed on top of the cowling, in front of the cockpit. Another pair, much like the Gladiator’s arrangement was placed in the fuselage flanks, below the exhaust outlets.

 

Compared with the Gladiator, the design changes were so fundamental that Gloster eventually decided to allocate a separate designation – also with a view to the type’s foreign marketing, since a new aircraft appeared more attractive than another mark of a pre-war design. For the type’s virgin flight in late 1938 the name “Glaive” was unveiled to the public, and several smaller European air forces immediately showed interest, including Greece, Croatia, Turkey, Portugal and Egypt.

 

Greece was one of the initial customers, and the first of a total of 24 aircraft for the Hellenic Air Force was delivered in early 1939, with 24 more on order (which were never delivered, though). The initial batch arrived just in time, since tension had been building between Greece and Italy since 7 April 1939, when Italian troops occupied Albania. On 28 October 1940, Italy issued an ultimatum to Greece, which was promptly rejected. A few hours later, Italian troops launched an invasion of Greece, initiating the Greco-Italian War.

 

The Hellenic Gloster Glaives were split among three Mirae Dioxeos (Fighter Squadrons): the 21st at Trikala, 22nd at Thessaloniki and 23rd at Larissa. When Italy attacked in October 1940, the British fighter was, together with the PZL 24, the Greeks' only modern type in adequate numbers. However, by late 1940, the Gloster Glaive was already no longer a front-runner despite a powerful powerplant and satisfactory armament. It had no speed advantage over the Fiat Cr.42 nor could it outfly the nimble Italian biplane, and it was much slower than the Macchi MC.200 and the Fiat G.50 it was pitted against. Its agility was the only real advantage against the Italian fighters, whose reliance on the slow firing Breda-SAFAT 12.7mm machine guns proved detrimental.

 

Anyway, on 5 April 1941, German forces invaded Greece and quickly established air superiority. As the Allied troops retreated, British and Hellenic forces covered them, before flying to Crete during the last week of April. There, the refugee aircraft recorded a few claims over twin-engine aircraft before being evacuated to Egypt during the Battle of Crete.

 

Overall, the Glaives performed gallantly during the early period of the conflict, holding their own against impossible numerical odds and despite the fact that their main target were enemy bombers which forced them to fight at a disadvantage against enemy fighters. Italian claims of easy superiority over the Albanian front were vastly over-rated and their kill claims even exceeded the total number of operational fighters on the Greek side. Total Greek fighter losses in combat came to 24 a/c with the Greek fighter pilots claiming 64 confirmed kills and 24 probables (about two third bombers).

 

By April 1941, however, lack of spares and attrition had forced the Hellenic Air Force to merge the surviving seven Glaives with five leftover PZL.24s into one understrength squadron supported by five Gloster Gladiators Mk I & II and the two surviving MB.151s. These fought hopelessly against the Luftwaffe onslaught, and most aircraft were eventually lost on the ground. None of the Hellenic Gloster Glaives survived the conflict.

  

General characteristics:

Crew: two

Length: 8.92m (29 ft 3 in)

Wingspan: 34 ft 0 in (10.36 m)

Height: 11 ft 9 in (3.58 m)

Wing area: 317 ft² (29.4 m²)

Empty weight: 1,295 kg (2,855 lb)

Max takeoff weight: 1,700 kg (3,748 lb)

 

Powerplant:

1× Rolls Royce Peregrine II liquid-cooled V12 inline engine, rated at 940 hp (700 kw)

 

Performance:

Maximum speed: 405 km/h (252 mph; 219 kn) at 4,400 m (14,436 ft)

Cruise speed: 345 km/h (214 mph; 186 kn)

Stall speed: 60 mph (52 knots, 96 km/h)

Range: 373 mi (600 km; 324 nmi)

Endurance: 2 hours

Service ceiling: 10,600 m (34,800 ft)

Rate of climb: 2,982 ft/min (15.15 m/s)

Time to altitude: 10.000 ft (3.050 m) in 3 minutes 20 seconds

 

Armament:

4× 0.303 calibre (7.7 mm) M1919 Browning machine guns in the fuselage

Provisions for 6× 10 kg (22 lb) or 4x 20 kg (44 lb) bombs under the lower wings

  

The kit and its assembly:

The fictional Gloster Glaive started quite simple with the idea of replacing the Gladiator’s radial with an inline engine. But this soon did not appear enough for an update – the Peregrine hardly delivered much more power than the former Mercury, so I considered some structural updates, too. Most of them comprised the replacement of former fabric-covered structures, and this led conceptually to a kitbash with only some Gladiator fuselage and tail parts left.

 

The basis is (once more) the very nice Matchbox Gloster Gladiator, but it was heavily modified. As an initial step, fuselage, fin and stabilizers (all OOB parts) lost their rib-and-fabric structure, simply sanded away. A minor detail, but it changes the overall look of the aircraft a lot, making it appear much more modern.

The fuselage was left without the OOB radial, and instead a leftover Merlin front end from an Airfix Hurricane (ca. 1cm long, left over from one of my first whif builds ever, a Hurricane with a radial engine!) was added. The lines match pretty well: the side profile looks sleek, if not elegant, but the Gladiator fuselage turned out to be wider than expected. Some major body work/PSR was necessary to integrate the new nose, but the result looks very good.

 

The liquid-cooled engine necessitated a radiator somewhere on the airframe…! Since I wanted the nose to remain slim and streamlined I eventually placed the radiator bath under the fuselage, much like the arrangement of the Hawker Fury biplane. The radiator itself comes from a late Spitfire (FROG kit).

The exhaust was taken from the Hurricane kit, too, and matching slits dug into the putty nose to take them. The three blade propeller is a mash-up, too: the spinner belongs, IIRC, to an early Spitfire (left over from an AZ Models kit) while the blades came from a damaged Matchbox Brewster Buffalo.

 

The Gladiator’s fuselage flank machine guns were kept and their “bullet channels” extrapolated along the new cowling, running under the new exhaust pipes. Another pair of machine guns were placed on top of the engine – for these, openings were carved into the upper hull and small fairings (similar to the Browning guns in the flanks) added. This arrangement appeared plausible to me, since the Gladiator’s oil cooler was not necessary anymore and the new lower wings (see below) were not big enough anymore to take the Gladiator’s underwing guns. Four MGs in the fuselage appears massive – but there were other types with such an arrangement, e.g. the Avia B-534 with four guns in the flanks and an inline engine.

 

The wings are complete replacements: the upper wing comes from a Heller Curtiss SBC4, while the lower wings as well as the spats (on shortened OOB Gladiator struts) come from an ICM Polikarpov I-153. All struts were scratched. Once the lower wings were in place and the relative position of the upper wing clear, the outer struts were carved from 1mm styrene sheet, using the I-153 design as benchmark. These were glued to the lower wing first, and, once totally dry after 24h, the upper wing was simply glued onto the top and the wing position adjusted. This was left to dry another 24h, and as a final step the four struts above the cowling (using the OOB struts, but as single parts and trimmed for proper fit) were placed. This way, a stable connection is guaranteed – and the result is surprisingly sturdy.

 

Rigging was done with heated sprue material – my personal favorite for this delicate task, and executed before painting the kit started so that the glue could cure and bond well.

  

Painting and markings:

The reason why this aircraft ended in Greek service is a color photograph of a crashed Hellenic Bloch M.B. 152 (coded ‘D 177’, to be specific). I guess that the picture was post-colored, though, because the aircraft of French origin sports rather weird colors: the picture shows a two-tone scheme in a deep, rather reddish chestnut brown and a light green that almost looks like teal. Unique, to say the least... Underside colors couldn’t be identified with certainty in the picture, but appeared like a pale but not too light blue grey.

 

Anyway, I assume that these colors are pure fiction and exaggerated Photoshop work, since the few M.B. 152s delivered to Greece carried AFAIK standard French camouflage (in French Khaki, Chestnut Brown and Blue-Grey on the upper surfaces, and a very light blue-grey from below). I’d assume that the contrast between the grey and green tones was not very obvious in the original photograph, so that the artist, not familiar with WWII paint schemes, replaced both colors with the strange teal tone and massively overmodulated the brown.

 

As weird as it looked, I liked this design and used it as an inspirational benchmark for my Hellenic Glaive build. After all, it’s a fictional aircraft… Upper basic colors are Humbrol 31 (RAF Slate Grey) and 160 (German Camouflage Red Brown), while the undersides became French Dark Blue Grey (ModelMaster Authentics 2105). The result looks rather odd…

Representing a combat-worn aircraft, I applied a thorough black ink wash and did heavier panel shading and dry-brushing on the leading edges, along with some visible touches of aluminum.

 

The Hellenic roundels come from a TL Modellbau aftermarket sheet. The tactical code was puzzled together from single letters, and the Greek “D” was created from single decal strips. For better contrast I used white decals – most Hellenic aircraft of the time had black codes, but the contrast is much better, and I found evidence that some machines actually carried white codes. The small fin flash is another free interpretation. Not every Hellenic aircraft carried these markings, and instead of painting the whole rudder in Greek colors I just applied a small fin flash. This was created with white and blue decal strips, closely matching the roundels’ colors.

 

Finally, after some soot stains around the guns and the exhausts, the kit was sealed with matt acrylic varnish.

  

Modified beyond recognition, perhaps…? The fictional Gloster Glaive looks IMHO good and very modern, just like one of those final biplane designs that were about to be outrun by monoplanes at the brink of WWII.

 

See more photos of this, and the Wikipedia article.

 

Details, quoting from Smithsonian National Air and Space Museum | Lockheed SR-71 Blackbird:

 

No reconnaissance aircraft in history has operated globally in more hostile airspace or with such complete impunity than the SR-71, the world's fastest jet-propelled aircraft. The Blackbird's performance and operational achievements placed it at the pinnacle of aviation technology developments during the Cold War.

 

This Blackbird accrued about 2,800 hours of flight time during 24 years of active service with the U.S. Air Force. On its last flight, March 6, 1990, Lt. Col. Ed Yielding and Lt. Col. Joseph Vida set a speed record by flying from Los Angeles to Washington, D.C., in 1 hour, 4 minutes, and 20 seconds, averaging 3,418 kilometers (2,124 miles) per hour. At the flight's conclusion, they landed at Washington-Dulles International Airport and turned the airplane over to the Smithsonian.

 

Transferred from the United States Air Force.

 

Manufacturer:

Lockheed Aircraft Corporation

 

Designer:

Clarence L. "Kelly" Johnson

 

Date:

1964

 

Country of Origin:

United States of America

 

Dimensions:

Overall: 18ft 5 15/16in. x 55ft 7in. x 107ft 5in., 169998.5lb. (5.638m x 16.942m x 32.741m, 77110.8kg)

Other: 18ft 5 15/16in. x 107ft 5in. x 55ft 7in. (5.638m x 32.741m x 16.942m)

 

Materials:

Titanium

 

Physical Description:

Twin-engine, two-seat, supersonic strategic reconnaissance aircraft; airframe constructed largley of titanium and its alloys; vertical tail fins are constructed of a composite (laminated plastic-type material) to reduce radar cross-section; Pratt and Whitney J58 (JT11D-20B) turbojet engines feature large inlet shock cones.

 

Long Description:

No reconnaissance aircraft in history has operated in more hostile airspace or with such complete impunity than the SR-71 Blackbird. It is the fastest aircraft propelled by air-breathing engines. The Blackbird's performance and operational achievements placed it at the pinnacle of aviation technology developments during the Cold War. The airplane was conceived when tensions with communist Eastern Europe reached levels approaching a full-blown crisis in the mid-1950s. U.S. military commanders desperately needed accurate assessments of Soviet worldwide military deployments, particularly near the Iron Curtain. Lockheed Aircraft Corporation's subsonic U-2 (see NASM collection) reconnaissance aircraft was an able platform but the U. S. Air Force recognized that this relatively slow aircraft was already vulnerable to Soviet interceptors. They also understood that the rapid development of surface-to-air missile systems could put U-2 pilots at grave risk. The danger proved reality when a U-2 was shot down by a surface to air missile over the Soviet Union in 1960.

 

Lockheed's first proposal for a new high speed, high altitude, reconnaissance aircraft, to be capable of avoiding interceptors and missiles, centered on a design propelled by liquid hydrogen. This proved to be impracticable because of considerable fuel consumption. Lockheed then reconfigured the design for conventional fuels. This was feasible and the Central Intelligence Agency (CIA), already flying the Lockheed U-2, issued a production contract for an aircraft designated the A-12. Lockheed's clandestine 'Skunk Works' division (headed by the gifted design engineer Clarence L. "Kelly" Johnson) designed the A-12 to cruise at Mach 3.2 and fly well above 18,288 m (60,000 feet). To meet these challenging requirements, Lockheed engineers overcame many daunting technical challenges. Flying more than three times the speed of sound generates 316° C (600° F) temperatures on external aircraft surfaces, which are enough to melt conventional aluminum airframes. The design team chose to make the jet's external skin of titanium alloy to which shielded the internal aluminum airframe. Two conventional, but very powerful, afterburning turbine engines propelled this remarkable aircraft. These power plants had to operate across a huge speed envelope in flight, from a takeoff speed of 334 kph (207 mph) to more than 3,540 kph (2,200 mph). To prevent supersonic shock waves from moving inside the engine intake causing flameouts, Johnson's team had to design a complex air intake and bypass system for the engines.

 

Skunk Works engineers also optimized the A-12 cross-section design to exhibit a low radar profile. Lockheed hoped to achieve this by carefully shaping the airframe to reflect as little transmitted radar energy (radio waves) as possible, and by application of special paint designed to absorb, rather than reflect, those waves. This treatment became one of the first applications of stealth technology, but it never completely met the design goals.

 

Test pilot Lou Schalk flew the single-seat A-12 on April 24, 1962, after he became airborne accidentally during high-speed taxi trials. The airplane showed great promise but it needed considerable technical refinement before the CIA could fly the first operational sortie on May 31, 1967 - a surveillance flight over North Vietnam. A-12s, flown by CIA pilots, operated as part of the Air Force's 1129th Special Activities Squadron under the "Oxcart" program. While Lockheed continued to refine the A-12, the U. S. Air Force ordered an interceptor version of the aircraft designated the YF-12A. The Skunk Works, however, proposed a "specific mission" version configured to conduct post-nuclear strike reconnaissance. This system evolved into the USAF's familiar SR-71.

 

Lockheed built fifteen A-12s, including a special two-seat trainer version. Two A-12s were modified to carry a special reconnaissance drone, designated D-21. The modified A-12s were redesignated M-21s. These were designed to take off with the D-21 drone, powered by a Marquart ramjet engine mounted on a pylon between the rudders. The M-21 then hauled the drone aloft and launched it at speeds high enough to ignite the drone's ramjet motor. Lockheed also built three YF-12As but this type never went into production. Two of the YF-12As crashed during testing. Only one survives and is on display at the USAF Museum in Dayton, Ohio. The aft section of one of the "written off" YF-12As which was later used along with an SR-71A static test airframe to manufacture the sole SR-71C trainer. One SR-71 was lent to NASA and designated YF-12C. Including the SR-71C and two SR-71B pilot trainers, Lockheed constructed thirty-two Blackbirds. The first SR-71 flew on December 22, 1964. Because of extreme operational costs, military strategists decided that the more capable USAF SR-71s should replace the CIA's A-12s. These were retired in 1968 after only one year of operational missions, mostly over southeast Asia. The Air Force's 1st Strategic Reconnaissance Squadron (part of the 9th Strategic Reconnaissance Wing) took over the missions, flying the SR-71 beginning in the spring of 1968.

 

After the Air Force began to operate the SR-71, it acquired the official name Blackbird-- for the special black paint that covered the airplane. This paint was formulated to absorb radar signals, to radiate some of the tremendous airframe heat generated by air friction, and to camouflage the aircraft against the dark sky at high altitudes.

 

Experience gained from the A-12 program convinced the Air Force that flying the SR-71 safely required two crew members, a pilot and a Reconnaissance Systems Officer (RSO). The RSO operated with the wide array of monitoring and defensive systems installed on the airplane. This equipment included a sophisticated Electronic Counter Measures (ECM) system that could jam most acquisition and targeting radar. In addition to an array of advanced, high-resolution cameras, the aircraft could also carry equipment designed to record the strength, frequency, and wavelength of signals emitted by communications and sensor devices such as radar. The SR-71 was designed to fly deep into hostile territory, avoiding interception with its tremendous speed and high altitude. It could operate safely at a maximum speed of Mach 3.3 at an altitude more than sixteen miles, or 25,908 m (85,000 ft), above the earth. The crew had to wear pressure suits similar to those worn by astronauts. These suits were required to protect the crew in the event of sudden cabin pressure loss while at operating altitudes.

 

To climb and cruise at supersonic speeds, the Blackbird's Pratt & Whitney J-58 engines were designed to operate continuously in afterburner. While this would appear to dictate high fuel flows, the Blackbird actually achieved its best "gas mileage," in terms of air nautical miles per pound of fuel burned, during the Mach 3+ cruise. A typical Blackbird reconnaissance flight might require several aerial refueling operations from an airborne tanker. Each time the SR-71 refueled, the crew had to descend to the tanker's altitude, usually about 6,000 m to 9,000 m (20,000 to 30,000 ft), and slow the airplane to subsonic speeds. As velocity decreased, so did frictional heat. This cooling effect caused the aircraft's skin panels to shrink considerably, and those covering the fuel tanks contracted so much that fuel leaked, forming a distinctive vapor trail as the tanker topped off the Blackbird. As soon as the tanks were filled, the jet's crew disconnected from the tanker, relit the afterburners, and again climbed to high altitude.

 

Air Force pilots flew the SR-71 from Kadena AB, Japan, throughout its operational career but other bases hosted Blackbird operations, too. The 9th SRW occasionally deployed from Beale AFB, California, to other locations to carryout operational missions. Cuban missions were flown directly from Beale. The SR-71 did not begin to operate in Europe until 1974, and then only temporarily. In 1982, when the U.S. Air Force based two aircraft at Royal Air Force Base Mildenhall to fly monitoring mission in Eastern Europe.

 

When the SR-71 became operational, orbiting reconnaissance satellites had already replaced manned aircraft to gather intelligence from sites deep within Soviet territory. Satellites could not cover every geopolitical hotspot so the Blackbird remained a vital tool for global intelligence gathering. On many occasions, pilots and RSOs flying the SR-71 provided information that proved vital in formulating successful U. S. foreign policy. Blackbird crews provided important intelligence about the 1973 Yom Kippur War, the Israeli invasion of Lebanon and its aftermath, and pre- and post-strike imagery of the 1986 raid conducted by American air forces on Libya. In 1987, Kadena-based SR-71 crews flew a number of missions over the Persian Gulf, revealing Iranian Silkworm missile batteries that threatened commercial shipping and American escort vessels.

 

As the performance of space-based surveillance systems grew, along with the effectiveness of ground-based air defense networks, the Air Force started to lose enthusiasm for the expensive program and the 9th SRW ceased SR-71 operations in January 1990. Despite protests by military leaders, Congress revived the program in 1995. Continued wrangling over operating budgets, however, soon led to final termination. The National Aeronautics and Space Administration retained two SR-71As and the one SR-71B for high-speed research projects and flew these airplanes until 1999.

 

On March 6, 1990, the service career of one Lockheed SR-71A Blackbird ended with a record-setting flight. This special airplane bore Air Force serial number 64-17972. Lt. Col. Ed Yeilding and his RSO, Lieutenant Colonel Joseph Vida, flew this aircraft from Los Angeles to Washington D.C. in 1 hour, 4 minutes, and 20 seconds, averaging a speed of 3,418 kph (2,124 mph). At the conclusion of the flight, '972 landed at Dulles International Airport and taxied into the custody of the Smithsonian's National Air and Space Museum. At that time, Lt. Col. Vida had logged 1,392.7 hours of flight time in Blackbirds, more than that of any other crewman.

 

This particular SR-71 was also flown by Tom Alison, a former National Air and Space Museum's Chief of Collections Management. Flying with Detachment 1 at Kadena Air Force Base, Okinawa, Alison logged more than a dozen '972 operational sorties. The aircraft spent twenty-four years in active Air Force service and accrued a total of 2,801.1 hours of flight time.

 

Wingspan: 55'7"

Length: 107'5"

Height: 18'6"

Weight: 170,000 Lbs

 

Reference and Further Reading:

 

Crickmore, Paul F. Lockheed SR-71: The Secret Missions Exposed. Oxford: Osprey Publishing, 1996.

 

Francillon, Rene J. Lockheed Aircraft Since 1913. Annapolis, Md.: Naval Institute Press, 1987.

 

Johnson, Clarence L. Kelly: More Than My Share of It All. Washington D.C.: Smithsonian Institution Press, 1985.

 

Miller, Jay. Lockheed Martin's Skunk Works. Leicester, U.K.: Midland Counties Publishing Ltd., 1995.

 

Lockheed SR-71 Blackbird curatorial file, Aeronautics Division, National Air and Space Museum.

 

DAD, 11-11-01

+++ DISCLAIMER +++

Nothing you see here is real, even though the conversion or the presented background story might be based historical facts. BEWARE!

 

Some background:

The Lavochkin La-7 (Russian: Лавочкин Ла-7) was a piston-engine Soviet fighter developed during World War II by the Lavochkin Design Bureau (OKB). It was a development and refinement of the Lavochkin La-5, and the last in a family of aircraft that had begun with the LaGG-1 in 1938.

 

By 1943, the La-5 had become a mainstay of the Soviet Air Forces, yet both its head designer, Semyon Lavochkin, as well as the engineers at the Central Aerohydrodynamics Institute (Russian: TsAGI), felt that it could be improved upon. TsAGI refined earlier studies of aerodynamic improvements to the La-5 airframe in mid-1943 and modified La-5FN to evaluate the changes between December 1943 and February 1944 and proved to have exceptional performance.

 

Using the same engine as the standard La-5FN the modified aircraft had a top speed of 684 kilometers per hour (425 mph) at a height of 6,150 meters (20,180 ft), some 64 kilometers per hour (40 mph) faster than the production La-5FN. It took 5.2 minutes to climb to 5,000 meters (16,404 ft). Main change was the use of more lighter but stronger metal wing spars to save weight.

 

The La-5, as well as its predecessors, had been built mostly of wood to conserve strategic materials such as aircraft alloys. With Soviet strategists now confident that supplies of these alloys were unlikely to become a problem, Lavochkin was now able to replace some wooden parts with alloy components.

Combat trials began in mid-September 1944 and were generally very positive.

 

However four aircraft were lost to engine failures and the engines suffered from numerous lesser problems, despite its satisfactory service in the La-5FN. One cause was the lower position of the engine air intakes in the wing roots of the La-7 which caused the engine to ingest sand and dust. One batch of flawed wings was built and caused six accidents, four of them fatal, in October which caused the fighter to be grounded until the cause was determined to be a defect in the wing spar.

 

Production of the first aircraft fitted with three B-20 cannon began in January 1945 when 74 were delivered. More than 2000 La-7 aircraft were delivered before the war's end, and a total of 5753 aircraft until production ceded in 1946.

 

Still, the basic concept had more development potential, and as soon as March 1945 work on further improvements for the La-7 started, while in parallel a new type was under development - the La-9, which would enter prototype stage in 1946. An interim type was needed - and this became the La-7bis. It was based on the proven La-7, but already incorporated crucial elements of the future La-9, e. g. its laminar flow wing shape as well as an increased share of light alloy in the construction.

 

Overall, the La-7bis was tailored to higher operation altitudes than the standard La-7 and was intended to intercept high flying bombers and reconnaissance aircraft like the Ju 388. Therefore the interim type incorporated many small refinements and changes, most notably a bigger wing and fin area, a four-bladed propeller and a pair of new 23 mm Nudelman-Suranov NS-23 cannons which considerably improved firepower and weapon range.

 

The La-7bis was built in parallel to the standard La-7, but only at Zavod Nr. 99 in Ulan-Ude, where 433 aircraft were built until 1946. Only a few La-7bis reached the front units during WWII in time, and in Soviet service the type was quickly superseded by the La-9. Many aircraft were used in flying schools and training regiments, though, or quickly handed over to allies like China and Korea.

 

With these operators the La-7bis actively took part in the Korean War and remained in service until the mid-Sixties, when piston fighters were finally replaced by the highly successful MiG-15.

 

Even though a sub version of the La-7, the type received the separate Air Standardization Coordinating Committee (ASCC) code "Flake" as it was initially mistaken as a new Lavochkin type.

 

General characteristics

Crew: 1

Length: 8.89 m (29 ft 1 1/2 in)

Wingspan: 10,16 m (33 ft 3 in)

Height: 2.41 m (7 ft 11 in)

Wing area: 19.59 m2 (210.2 sq ft)

Gross weight: 3,315 kg (7,308 lb)

 

Powerplant:

1× Shvetsov ASh-82FN air-cooled 14 cylinder radial engine with a two-stage supercharger and

fuel injection, 1.380 kW (1.850 hp), driving a 4-bladed VISh-110V propeller

 

Performance:

Maximum speed: 680 km/h (422 mph; 367 kn) at 6.000 meters (19.685 ft)

Range: 665 km (413 mi; 359 nmi)

Service ceiling: 11.500 m (37.667 ft)

Rate of climb: 17.25 m/s (3.410 ft/min)

Time to altitude: 4.8 minutes to 5.000 meters (16.404 ft)

 

Armament:

2 × 23 mm Nudelman-Suranov NS-23 cannons, 150 RPG, plus 200 kg (440 lb) of bombs

  

The kit and its assembly:

This whif was a bit of a spontaneous use of a Hobby Boss La-7 kit, part of a kit lot, for which I lacked any good idea. Anyway, I always had an eye on kits for the more streamlined La-9/11s – and then the idea was born to convert the leftover La-7 into something that would come close to the later types.

 

Biggest surgery concerned the aerodynamic surface; everything was modified:

• Outer wings from a Matchbox P-51D

• Stabilizers from a Heller P-51D

• Fin tip from an Academy Fw 190A

 

Wings were cut just outboard of the landing gear wells, while the Mustang wings were cut at the 2nd machine gun. Depth fits surprisingly well, only the La-7’s trailing edge had to be adapted, but that only a small effort.

 

Another mod is the new, for-bladed propeller, scratched from the spares box, and I added some cockpit details and a pilot torso (the canopy was to remain closed). I also removed the original tunnel oil cooler and moved this device into the wings’ leading edges, for a cleaner fuselage.

 

For the same clean look I left away any ordnance. Actually, when all major parts were in place, I even considered to make a race aircraft (Reno Unlimited?) from the kit, since the Lavochkin looks really fast, but then I reverted to the military use option. A North Korean whif was still missing!

  

Painting and markings:

When I started building there was no clear idea which country should use the La-7bis – I did not want Soviet markings, though. After some search in the decal stack I found spare North Korean markings, and from there things unfolded naturally.

 

The odd paint scheme was derived from real Korean La-11 fighters – a kind of tiger stripe pattern, dull green over a grey background with pale blue undersides. I used Humbrol 64 (light Sea Grey) and FS 34096 from Modelmaster, and FS 35414 from Modelmaster, too, for the undersides. Later, these colors were shaded with lighter tones. A yellow fin tip is the only color marking.

 

North Korean roundels come from a Print Scale MiG-15 decal sheet, the tactical code comes from the scrap box; the fine silver trim around the cowling and the black stripe under the yellow fin tip are decals, too, from generic TL Modellbau sheets.

 

All interior surfaces were painted with Humbrol 240 (RLM 02, plus a black ink wash), and to add some Soviet style the wheel discs were painted in dark green. The panels on the fuselage flanks were painted in a Metallizer Mix of Steel and Titanium.

 

The kit received a light black ink wash, plus some soot stains around the cannons and the exhaust shields. Finally, all was sealed with Revell’s acrylic matt varnish.

  

In the end, the La-7bis looks like less work than it actually was - one can argue if the effort has been worth it? The major transplantations are hard to discern and you have to look at least twice to recognize the differences between a La-7 and the later La-9 and -11. But that was intended – subtle and unspectacular.

 

See more photos of this, and the Wikipedia article.

 

Details, quoting from Smithsonian National Air and Space Museum | Lockheed SR-71 Blackbird:

 

No reconnaissance aircraft in history has operated globally in more hostile airspace or with such complete impunity than the SR-71, the world's fastest jet-propelled aircraft. The Blackbird's performance and operational achievements placed it at the pinnacle of aviation technology developments during the Cold War.

 

This Blackbird accrued about 2,800 hours of flight time during 24 years of active service with the U.S. Air Force. On its last flight, March 6, 1990, Lt. Col. Ed Yielding and Lt. Col. Joseph Vida set a speed record by flying from Los Angeles to Washington, D.C., in 1 hour, 4 minutes, and 20 seconds, averaging 3,418 kilometers (2,124 miles) per hour. At the flight's conclusion, they landed at Washington-Dulles International Airport and turned the airplane over to the Smithsonian.

 

Transferred from the United States Air Force.

 

Manufacturer:

Lockheed Aircraft Corporation

 

Designer:

Clarence L. "Kelly" Johnson

 

Date:

1964

 

Country of Origin:

United States of America

 

Dimensions:

Overall: 18ft 5 15/16in. x 55ft 7in. x 107ft 5in., 169998.5lb. (5.638m x 16.942m x 32.741m, 77110.8kg)

Other: 18ft 5 15/16in. x 107ft 5in. x 55ft 7in. (5.638m x 32.741m x 16.942m)

 

Materials:

Titanium

 

Physical Description:

Twin-engine, two-seat, supersonic strategic reconnaissance aircraft; airframe constructed largley of titanium and its alloys; vertical tail fins are constructed of a composite (laminated plastic-type material) to reduce radar cross-section; Pratt and Whitney J58 (JT11D-20B) turbojet engines feature large inlet shock cones.

 

Long Description:

No reconnaissance aircraft in history has operated in more hostile airspace or with such complete impunity than the SR-71 Blackbird. It is the fastest aircraft propelled by air-breathing engines. The Blackbird's performance and operational achievements placed it at the pinnacle of aviation technology developments during the Cold War. The airplane was conceived when tensions with communist Eastern Europe reached levels approaching a full-blown crisis in the mid-1950s. U.S. military commanders desperately needed accurate assessments of Soviet worldwide military deployments, particularly near the Iron Curtain. Lockheed Aircraft Corporation's subsonic U-2 (see NASM collection) reconnaissance aircraft was an able platform but the U. S. Air Force recognized that this relatively slow aircraft was already vulnerable to Soviet interceptors. They also understood that the rapid development of surface-to-air missile systems could put U-2 pilots at grave risk. The danger proved reality when a U-2 was shot down by a surface to air missile over the Soviet Union in 1960.

 

Lockheed's first proposal for a new high speed, high altitude, reconnaissance aircraft, to be capable of avoiding interceptors and missiles, centered on a design propelled by liquid hydrogen. This proved to be impracticable because of considerable fuel consumption. Lockheed then reconfigured the design for conventional fuels. This was feasible and the Central Intelligence Agency (CIA), already flying the Lockheed U-2, issued a production contract for an aircraft designated the A-12. Lockheed's clandestine 'Skunk Works' division (headed by the gifted design engineer Clarence L. "Kelly" Johnson) designed the A-12 to cruise at Mach 3.2 and fly well above 18,288 m (60,000 feet). To meet these challenging requirements, Lockheed engineers overcame many daunting technical challenges. Flying more than three times the speed of sound generates 316° C (600° F) temperatures on external aircraft surfaces, which are enough to melt conventional aluminum airframes. The design team chose to make the jet's external skin of titanium alloy to which shielded the internal aluminum airframe. Two conventional, but very powerful, afterburning turbine engines propelled this remarkable aircraft. These power plants had to operate across a huge speed envelope in flight, from a takeoff speed of 334 kph (207 mph) to more than 3,540 kph (2,200 mph). To prevent supersonic shock waves from moving inside the engine intake causing flameouts, Johnson's team had to design a complex air intake and bypass system for the engines.

 

Skunk Works engineers also optimized the A-12 cross-section design to exhibit a low radar profile. Lockheed hoped to achieve this by carefully shaping the airframe to reflect as little transmitted radar energy (radio waves) as possible, and by application of special paint designed to absorb, rather than reflect, those waves. This treatment became one of the first applications of stealth technology, but it never completely met the design goals.

 

Test pilot Lou Schalk flew the single-seat A-12 on April 24, 1962, after he became airborne accidentally during high-speed taxi trials. The airplane showed great promise but it needed considerable technical refinement before the CIA could fly the first operational sortie on May 31, 1967 - a surveillance flight over North Vietnam. A-12s, flown by CIA pilots, operated as part of the Air Force's 1129th Special Activities Squadron under the "Oxcart" program. While Lockheed continued to refine the A-12, the U. S. Air Force ordered an interceptor version of the aircraft designated the YF-12A. The Skunk Works, however, proposed a "specific mission" version configured to conduct post-nuclear strike reconnaissance. This system evolved into the USAF's familiar SR-71.

 

Lockheed built fifteen A-12s, including a special two-seat trainer version. Two A-12s were modified to carry a special reconnaissance drone, designated D-21. The modified A-12s were redesignated M-21s. These were designed to take off with the D-21 drone, powered by a Marquart ramjet engine mounted on a pylon between the rudders. The M-21 then hauled the drone aloft and launched it at speeds high enough to ignite the drone's ramjet motor. Lockheed also built three YF-12As but this type never went into production. Two of the YF-12As crashed during testing. Only one survives and is on display at the USAF Museum in Dayton, Ohio. The aft section of one of the "written off" YF-12As which was later used along with an SR-71A static test airframe to manufacture the sole SR-71C trainer. One SR-71 was lent to NASA and designated YF-12C. Including the SR-71C and two SR-71B pilot trainers, Lockheed constructed thirty-two Blackbirds. The first SR-71 flew on December 22, 1964. Because of extreme operational costs, military strategists decided that the more capable USAF SR-71s should replace the CIA's A-12s. These were retired in 1968 after only one year of operational missions, mostly over southeast Asia. The Air Force's 1st Strategic Reconnaissance Squadron (part of the 9th Strategic Reconnaissance Wing) took over the missions, flying the SR-71 beginning in the spring of 1968.

 

After the Air Force began to operate the SR-71, it acquired the official name Blackbird-- for the special black paint that covered the airplane. This paint was formulated to absorb radar signals, to radiate some of the tremendous airframe heat generated by air friction, and to camouflage the aircraft against the dark sky at high altitudes.

 

Experience gained from the A-12 program convinced the Air Force that flying the SR-71 safely required two crew members, a pilot and a Reconnaissance Systems Officer (RSO). The RSO operated with the wide array of monitoring and defensive systems installed on the airplane. This equipment included a sophisticated Electronic Counter Measures (ECM) system that could jam most acquisition and targeting radar. In addition to an array of advanced, high-resolution cameras, the aircraft could also carry equipment designed to record the strength, frequency, and wavelength of signals emitted by communications and sensor devices such as radar. The SR-71 was designed to fly deep into hostile territory, avoiding interception with its tremendous speed and high altitude. It could operate safely at a maximum speed of Mach 3.3 at an altitude more than sixteen miles, or 25,908 m (85,000 ft), above the earth. The crew had to wear pressure suits similar to those worn by astronauts. These suits were required to protect the crew in the event of sudden cabin pressure loss while at operating altitudes.

 

To climb and cruise at supersonic speeds, the Blackbird's Pratt & Whitney J-58 engines were designed to operate continuously in afterburner. While this would appear to dictate high fuel flows, the Blackbird actually achieved its best "gas mileage," in terms of air nautical miles per pound of fuel burned, during the Mach 3+ cruise. A typical Blackbird reconnaissance flight might require several aerial refueling operations from an airborne tanker. Each time the SR-71 refueled, the crew had to descend to the tanker's altitude, usually about 6,000 m to 9,000 m (20,000 to 30,000 ft), and slow the airplane to subsonic speeds. As velocity decreased, so did frictional heat. This cooling effect caused the aircraft's skin panels to shrink considerably, and those covering the fuel tanks contracted so much that fuel leaked, forming a distinctive vapor trail as the tanker topped off the Blackbird. As soon as the tanks were filled, the jet's crew disconnected from the tanker, relit the afterburners, and again climbed to high altitude.

 

Air Force pilots flew the SR-71 from Kadena AB, Japan, throughout its operational career but other bases hosted Blackbird operations, too. The 9th SRW occasionally deployed from Beale AFB, California, to other locations to carryout operational missions. Cuban missions were flown directly from Beale. The SR-71 did not begin to operate in Europe until 1974, and then only temporarily. In 1982, when the U.S. Air Force based two aircraft at Royal Air Force Base Mildenhall to fly monitoring mission in Eastern Europe.

 

When the SR-71 became operational, orbiting reconnaissance satellites had already replaced manned aircraft to gather intelligence from sites deep within Soviet territory. Satellites could not cover every geopolitical hotspot so the Blackbird remained a vital tool for global intelligence gathering. On many occasions, pilots and RSOs flying the SR-71 provided information that proved vital in formulating successful U. S. foreign policy. Blackbird crews provided important intelligence about the 1973 Yom Kippur War, the Israeli invasion of Lebanon and its aftermath, and pre- and post-strike imagery of the 1986 raid conducted by American air forces on Libya. In 1987, Kadena-based SR-71 crews flew a number of missions over the Persian Gulf, revealing Iranian Silkworm missile batteries that threatened commercial shipping and American escort vessels.

 

As the performance of space-based surveillance systems grew, along with the effectiveness of ground-based air defense networks, the Air Force started to lose enthusiasm for the expensive program and the 9th SRW ceased SR-71 operations in January 1990. Despite protests by military leaders, Congress revived the program in 1995. Continued wrangling over operating budgets, however, soon led to final termination. The National Aeronautics and Space Administration retained two SR-71As and the one SR-71B for high-speed research projects and flew these airplanes until 1999.

 

On March 6, 1990, the service career of one Lockheed SR-71A Blackbird ended with a record-setting flight. This special airplane bore Air Force serial number 64-17972. Lt. Col. Ed Yeilding and his RSO, Lieutenant Colonel Joseph Vida, flew this aircraft from Los Angeles to Washington D.C. in 1 hour, 4 minutes, and 20 seconds, averaging a speed of 3,418 kph (2,124 mph). At the conclusion of the flight, '972 landed at Dulles International Airport and taxied into the custody of the Smithsonian's National Air and Space Museum. At that time, Lt. Col. Vida had logged 1,392.7 hours of flight time in Blackbirds, more than that of any other crewman.

 

This particular SR-71 was also flown by Tom Alison, a former National Air and Space Museum's Chief of Collections Management. Flying with Detachment 1 at Kadena Air Force Base, Okinawa, Alison logged more than a dozen '972 operational sorties. The aircraft spent twenty-four years in active Air Force service and accrued a total of 2,801.1 hours of flight time.

 

Wingspan: 55'7"

Length: 107'5"

Height: 18'6"

Weight: 170,000 Lbs

 

Reference and Further Reading:

 

Crickmore, Paul F. Lockheed SR-71: The Secret Missions Exposed. Oxford: Osprey Publishing, 1996.

 

Francillon, Rene J. Lockheed Aircraft Since 1913. Annapolis, Md.: Naval Institute Press, 1987.

 

Johnson, Clarence L. Kelly: More Than My Share of It All. Washington D.C.: Smithsonian Institution Press, 1985.

 

Miller, Jay. Lockheed Martin's Skunk Works. Leicester, U.K.: Midland Counties Publishing Ltd., 1995.

 

Lockheed SR-71 Blackbird curatorial file, Aeronautics Division, National Air and Space Museum.

 

DAD, 11-11-01

A daring and sculptural creation, Citroën DS5 perfectly expresses the DS spirit, with bold choices on styling, architecture, sensations and refinement.

 

www.ds5.citroen.com/

Land Rover and renowned Magnum photographer Jonas Bendiksen have revealed the first in a series of unique works entitled ‘Ultimate Vistas’, extraordinary landscape photographs captured with help from the world’s ultimate SUV: the Range Rover.

Asian Canadian Festival

 

Don't use this image on websites, blogs or other media without explicit permission.

© All rights reserved

Yesterday I had the opportunity to drop in on a press conference held by the a great new company, Refinement Records. I’ve always been a fan of music photography, and love the local music scene. Utah has been showing there is real, awesome talent growing here, evidenced by some bands and individuals that have gained national recognition. Refinement recognizes this movement and wants to help artists get the tools and direction they need to succeed.

    

I was invited by Sam Schultz, of Sammy’s founding fame and now VP in charge of A&R at Refinement, to join the press conference held to announce a short tour with artists recently featured on NBC’s The Voice, Ryan Innes, Amy Whitcomb, and Ryan Hayes and John Peter Lewis of Midas Whale. It was very cool to see their new office and studio facilities, meet these artists and snap a few frames. If you are a new or struggling artist, I’d recommend you hit these guys up for a consult.

    

Read more about it and see many more photos on the blog.

greatproj.com/2013/05/refinement-records-press-conference/

The Taj Mahal (/ˌtɑːdʒ məˈhɑːl/, more often /ˈtɑːʒ/; from Persian and Arabic, "crown of palaces", pronounced [ˈt̪aːdʒ mɛˈɦɛl]) is a white marble mausoleum located on the southern bank of Yamuna River in the Indian city of Agra. It was commissioned in 1632 by the Mughal emperor Shah Jahan (reigned 1628–1658) to house the tomb of his favorite wife of three, Mumtaz Mahal.

 

Construction of the mausoleum was essentially completed in 1643 but work continued on other phases of the project for an additional ten years. The Taj Mahal complex is believed to have been completed in its entirety in 1653 at a cost estimated at the time to be around 32 million Indian rupees, which in 2015 would be valued at around 52.8 billion Indian rupees ($827 million US). The construction project employed around 20,000 artisans under the guidance of a board of architects led by Ustad Ahmad Lahauri. The domed marble tomb is part of an integrated complex consisting of gardens and two red-sandstone buildings surrounded by a crenellated wall on three sides.

 

The Taj Mahal is regarded by many as the best example of Mughal architecture and is widely recognized as "the jewel of Muslim art in India". It is one of the world’s most celebrated structures and a symbol of India’s rich history. Designated a UNESCO World Heritage Site in 1983, the Taj Mahal attracts some 3 million visitors a year.

 

INSPIRATION

In 1631, Shah Jahan, emperor during the Mughal empire's period of greatest prosperity, was grief-stricken when his favorite of three wives and beloved companion, Mumtaz Mahal, a Persian princess, died during the birth of their 14th child, Gauhara Begum. Construction of the Taj Mahal began in 1632. The court chronicles of Shah Jahan's grief illustrate the love story traditionally held as an inspiration for Taj Mahal. The principal mausoleum was completed in 1643 and the surrounding buildings and garden were finished about five years later.

 

ARCHITECTURE AND DESIGN

The Taj Mahal incorporates and expands on design traditions of Persian and earlier Mughal architecture. Specific inspiration came from successful Timurid and Mughal buildings including; the Gur-e Amir (the tomb of Timur, progenitor of the Mughal dynasty, in Samarkand), Humayun's Tomb, Itmad-Ud-Daulah's Tomb (sometimes called the Baby Taj), and Shah Jahan's own Jama Masjid in Delhi. While earlier Mughal buildings were primarily constructed of red sandstone, Shah Jahan promoted the use of white marble inlaid with semi-precious stones. Buildings under his patronage reached new levels of refinement.

 

TOMB

The tomb is the central focus of the entire complex of the Taj Mahal. It is a large, white marble structure standing on a square plinth and consists of a symmetrical building with an iwan (an arch-shaped doorway) topped by a large dome and finial. Like most Mughal tombs, the basic elements are Persian in origin.

 

The base structure is a large multi-chambered cube with chamfered corners forming an unequal eight-sided structure that is approximately 55 metres on each of the four long sides. Each side of the iwan is framed with a huge pishtaq or vaulted archway with two similarly shaped arched balconies stacked on either side. This motif of stacked pishtaqs is replicated on the chamfered corner areas, making the design completely symmetrical on all sides of the building. Four minarets frame the tomb, one at each corner of the plinth facing the chamfered corners. The main chamber houses the false sarcophagi of Mumtaz Mahal and Shah Jahan; the actual graves are at a lower level.

 

The most spectacular feature is the marble dome that surmounts the tomb. The dome is nearly 35 metres high which is close in measurement to the length of the base, and accentuated by the cylindrical "drum" it sits on which is approximately 7 metres high. Because of its shape, the dome is often called an onion dome or amrud (guava dome). The top is decorated with a lotus design which also serves to accentuate its height. The shape of the dome is emphasized by four smaller domed chattris (kiosks) placed at its corners, which replicate the onion shape of the main dome. Their columned bases open through the roof of the tomb and provide light to the interior. Tall decorative spires (guldastas) extend from edges of base walls, and provide visual emphasis to the height of the dome. The lotus motif is repeated on both the chattris and guldastas. The dome and chattris are topped by a gilded finial which mixes traditional Persian and Hindustani decorative elements.

 

The main finial was originally made of gold but was replaced by a copy made of gilded bronze in the early 19th century. This feature provides a clear example of integration of traditional Persian and Hindu decorative elements. The finial is topped by a moon, a typical Islamic motif whose horns point heavenward.

 

The minarets, which are each more than 40 metres tall, display the designer's penchant for symmetry. They were designed as working minarets - a traditional element of mosques, used by the muezzin to call the Islamic faithful to prayer. Each minaret is effectively divided into three equal parts by two working balconies that ring the tower. At the top of the tower is a final balcony surmounted by a chattri that mirrors the design of those on the tomb. The chattris all share the same decorative elements of a lotus design topped by a gilded finial. The minarets were constructed slightly outside of the plinth so that in the event of collapse, a typical occurrence with many tall constructions of the period, the material from the towers would tend to fall away from the tomb.

 

EXTERIOR DECORATIONS

The exterior decorations of the Taj Mahal are among the finest in Mughal architecture. As the surface area changes, the decorations are refined proportionally. The decorative elements were created by applying paint, stucco, stone inlays or carvings. In line with the Islamic prohibition against the use of anthropomorphic forms, the decorative elements can be grouped into either calligraphy, abstract forms or vegetative motifs. Throughout the complex are passages from the Qur'an that comprise some of the decorative elements. Recent scholarship suggests that the passages were chosen by Amanat Khan.

 

The calligraphy on the Great Gate reads "O Soul, thou art at rest. Return to the Lord at peace with Him, and He at peace with you." The calligraphy was created in 1609 by a calligrapher named Abdul Haq. Shah Jahan conferred the title of "Amanat Khan" upon him as a reward for his "dazzling virtuosity". Near the lines from the Qur'an at the base of the interior dome is the inscription, "Written by the insignificant being, Amanat Khan Shirazi." Much of the calligraphy is composed of florid thuluth script made of jasper or black marble inlaid in white marble panels. Higher panels are written in slightly larger script to reduce the skewing effect when viewed from below. The calligraphy found on the marble cenotaphs in the tomb is particularly detailed and delicate.

 

Abstract forms are used throughout, especially in the plinth, minarets, gateway, mosque, jawab and, to a lesser extent, on the surfaces of the tomb. The domes and vaults of the sandstone buildings are worked with tracery of incised painting to create elaborate geometric forms. Herringbone inlays define the space between many of the adjoining elements. White inlays are used in sandstone buildings, and dark or black inlays on the white marbles. Mortared areas of the marble buildings have been stained or painted in a contrasting color which creates a complex array of geometric patterns. Floors and walkways use contrasting tiles or blocks in tessellation patterns.

 

On the lower walls of the tomb are white marble dados sculpted with realistic bas relief depictions of flowers and vines. The marble has been polished to emphasise the exquisite detailing of the carvings. The dado frames and archway spandrels have been decorated with pietra dura inlays of highly stylised, almost geometric vines, flowers and fruits. The inlay stones are of yellow marble, jasper and jade, polished and levelled to the surface of the walls.

 

INTERIOR DECORATION

The interior chamber of the Taj Mahal reaches far beyond traditional decorative elements. The inlay work is not pietra dura, but a lapidary of precious and semiprecious gemstones. The inner chamber is an octagon with the design allowing for entry from each face, although only the door facing the garden to the south is used. The interior walls are about 25 metres high and are topped by a "false" interior dome decorated with a sun motif. Eight pishtaq arches define the space at ground level and, as with the exterior, each lower pishtaq is crowned by a second pishtaq about midway up the wall. The four central upper arches form balconies or viewing areas, and each balcony's exterior window has an intricate screen or jali cut from marble. In addition to the light from the balcony screens, light enters through roof openings covered by chattris at the corners. The octagonal marble screen or jali bordering the cenotaphs is made from eight marble panels carved through with intricate pierce work. The remaining surfaces are inlaid in delicate detail with semi-precious stones forming twining vines, fruits and flowers. Each chamber wall is highly decorated with dado bas-relief, intricate lapidary inlay and refined calligraphy panels which reflect, in miniature detail, the design elements seen throughout the exterior of the complex.

 

Muslim tradition forbids elaborate decoration of graves. Hence, the bodies of Mumtaz and Shah Jahan were put in a relatively plain crypt beneath the inner chamber with their faces turned right, towards Mecca. Mumtaz Mahal's cenotaph is placed at the precise centre of the inner chamber on a rectangular marble base of 1.5 by 2.5 metres. Both the base and casket are elaborately inlaid with precious and semiprecious gems. Calligraphic inscriptions on the casket identify and praise Mumtaz. On the lid of the casket is a raised rectangular lozenge meant to suggest a writing tablet. Shah Jahan's cenotaph is beside Mumtaz's to the western side, and is the only visible asymmetric element in the entire complex. His cenotaph is bigger than his wife's, but reflects the same elements: a larger casket on a slightly taller base precisely decorated with lapidary and calligraphy that identifies him. On the lid of the casket is a traditional sculpture of a small pen box.

 

The pen box and writing tablet are traditional Mughal funerary icons decorating the caskets of men and women respectively. The Ninety Nine Names of God are calligraphic inscriptions on the sides of the actual tomb of Mumtaz Mahal. Other inscriptions inside the crypt include, "O Noble, O Magnificent, O Majestic, O Unique, O Eternal, O Glorious... ". The tomb of Shah Jahan bears a calligraphic inscription that reads; "He travelled from this world to the banquet-hall of Eternity on the night of the twenty-sixth of the month of Rajab, in the year 1076 Hijri."

 

GARDEN

The complex is set around a large 300-metre square charbagh or Mughal garden. The garden uses raised pathways that divide each of the four quarters of the garden into 16 sunken parterres or flowerbeds. Halfway between the tomb and gateway in the center of the garden is a raised marble water tank with a reflecting pool positioned on a north-south axis to reflect the image of the mausoleum. The raised marble water tank is called al Hawd al-Kawthar in reference to the "Tank of Abundance" promised to Muhammad.

 

Elsewhere, the garden is laid out with avenues of trees and fountains. The charbagh garden, a design inspired by Persian gardens, was introduced to India by Babur, the first Mughal emperor. It symbolises the four flowing rivers of Jannah (Paradise) and reflects the Paradise garden derived from the Persian paridaeza, meaning 'walled garden'. In mystic Islamic texts of the Mughal period, Paradise is described as an ideal garden of abundance with four rivers flowing from a central spring or mountain, separating the garden into north, west, south and east.

 

Most Mughal charbaghs are rectangular with a tomb or pavilion in the center. The Taj Mahal garden is unusual in that the main element, the tomb, is located at the end of the garden. With the discovery of Mahtab Bagh or "Moonlight Garden" on the other side of the Yamuna, the interpretation of the Archaeological Survey of India is that the Yamuna river itself was incorporated into the garden's design and was meant to be seen as one of the rivers of Paradise. Similarities in layout and architectural features with the Shalimar Gardens suggests both gardens may have been designed by the same architect, Ali Mardan. Early accounts of the garden describe its profusion of vegetation, including abundant roses, daffodils, and fruit trees. As the Mughal Empire declined, the Taj Mahal and its gardens also declined. By the end of the 19th century, the British Empire controlled more than three-fifths of India, and assumed management of the Taj Mahal. They changed the landscaping to their liking which more closely resembled the formal lawns of London.

 

OUTLYING BUILDINGS

The Taj Mahal complex is bordered on three sides by crenellated red sandstone walls; the side facing the river is open. Outside the walls are several additional mausoleums, including those of Shah Jahan's other wives, and a larger tomb for Mumtaz's favourite servant.

 

The main gateway (darwaza) is a monumental structure built primarily of marble, and reminiscent of the Mughal architecture of earlier emperors. Its archways mirror the shape of the tomb's archways, and its pishtaq arches incorporate the calligraphy that decorates the tomb. The vaulted ceilings and walls have elaborate geometric designs like those found in the other sandstone buildings in the complex.

 

At the far end of the complex are two grand red sandstone buildings that mirror each other, and face the sides of the tomb. The backs of the buildings parallel the western and eastern walls. The western building is a mosque and the other is the jawab (answer), thought to have been constructed for architectural balance although it may have been used as a guesthouse. Distinctions between the two buildings include the jawab's lack of a mihrab (a niche in a mosque's wall facing Mecca), and its floors of geometric design whereas the floor of the mosque is laid with outlines of 569 prayer rugs in black marble. The mosque's basic design of a long hall surmounted by three domes is similar to others built by Shah Jahan, particularly the Masjid-i Jahān-Numā, or Jama Masjid, Delhi. The Mughal mosques of this period divide the sanctuary hall into three areas comprising a main sanctuary and slightly smaller sanctuaries on either side. At the Taj Mahal, each sanctuary opens onto an expansive vaulting dome. The outlying buildings were completed in 1643.

 

CONSTRUCTION

The Taj Mahal is built on a parcel of land to the south of the walled city of Agra. Shah Jahan presented Maharajah Jai Singh with a large palace in the center of Agra in exchange for the land. An area of roughly three acres was excavated, filled with dirt to reduce seepage, and leveled at 50 metres above riverbank. In the tomb area, wells were dug and filled with stone and rubble to form the footings of the tomb. Instead of lashed bamboo, workmen constructed a colossal brick scaffold that mirrored the tomb. The scaffold was so enormous that foremen estimated it would take years to dismantle.

 

The Taj Mahal was constructed using materials from all over India and Asia. It is believed over 1,000 elephants were used to transport building materials. The translucent white marble was brought from Makrana, Rajasthan, the jasper from Punjab, jade and crystal from China. The turquoise was from Tibet and the Lapis lazuli from Afghanistan, while the sapphire came from Sri Lanka and the carnelian from Arabia. In all, twenty eight types of precious and semi-precious stones were inlaid into the white marble.

 

According to the legend, Shah Jahan decreed that anyone could keep the bricks taken from the scaffold, and thus it was dismantled by peasants overnight. A fifteen kilometer tamped-earth ramp was built to transport marble and materials to the construction site and teams of twenty or thirty oxen pulled the blocks on specially constructed wagons. An elaborate post-and-beam pulley system was used to raise the blocks into desired position. Water was drawn from the river by a series of purs, an animal-powered rope and bucket mechanism, into a large storage tank and raised to a large distribution tank. It was passed into three subsidiary tanks, from which it was piped to the complex.

 

The plinth and tomb took roughly 12 years to complete. The remaining parts of the complex took an additional 10 years and were completed in order of minarets, mosque and jawab, and gateway. Since the complex was built in stages, discrepancies exist in completion dates due to differing opinions on "completion". Construction of the mausoleum itself was essentially completed by 1643 while work continued on the outlying buildings. Estimates of the cost of construction vary due to difficulties in estimating costs across time. The total cost has been estimated to be about 32 million Indian rupees, which is around 52.8 billion Indian rupees ($827 million US) based on 2015 values.

 

LATER DAYS

Abdul Hamid Lahauri in his book Badshahnama refers to Taj Mahal as rauza-i munawwara, meaning the illumined or illustrious tomb. Soon after the Taj Mahal's completion, Shah Jahan was deposed by his son Aurangzeb and put under house arrest at nearby Agra Fort. Upon Shah Jahan's death, Aurangzeb buried him in the mausoleum next to his wife. In the 18th century, the Jat rulers of Bharatpur invaded Agra and attacked the Taj Mahal, the two chandeliers, one of agate and another of silver, which were hung over the main cenotaph, were taken away by them, along with the gold and silver screen. Kanbo, a Mughal historian, said the gold shield which covered the 15-foot high finial at the top of the main dome was also removed during the Jat despoliation.

 

By the late 19th century, parts of the buildings had fallen into disrepair. During the time of the Indian rebellion of 1857, the Taj Mahal was defaced by British soldiers and government officials, who chiselled out precious stones and lapis lazuli from its walls. At the end of the 19th century, British viceroy Lord Curzon ordered a sweeping restoration project, which was completed in 1908. He also commissioned the large lamp in the interior chamber, modelled after one in a Cairo mosque. During this time the garden was remodelled with British-style lawns that are still in place today.

 

THREATS

In 1942, the government erected a scaffolding to disguise the building in anticipation of air attacks by the Japanese Air Force. During the India-Pakistan wars of 1965 and 1971, scaffoldings were again erected to mislead bomber pilots.

 

More recent threats have come from environmental pollution on the banks of Yamuna River including acid rain due to the Mathura Oil Refinery, which was opposed by Supreme Court of India directives. The pollution has been turning the Taj Mahal yellow. To help control the pollution, the Indian government has set up the Taj Trapezium Zone (TTZ), a 10,400-square-kilometre area around the monument where strict emissions standards are in place.

 

Concerns for the tomb's structural integrity have recently been raised because of a decline in the groundwater level in the Yamuna river basin which is falling at a rate of around 5 feet a year. In 2010, cracks appeared in parts of the tomb, and the minarets which surround the monument were showing signs of tilting, as the wooden foundation of the tomb may be rotting due to lack of water. In 2011 it was reported that some predictions indicated that the tomb could collapse within 5 years.

 

TOURISM

The Taj Mahal attracts a large number of tourists. UNESCO documented more than 2 million visitors in 2001, which increased to about 3 million in 2015. A two tier pricing system is in place, with a significantly lower entrance fee for Indian citizens and a more expensive one for foreigners. Most tourists visit in the cooler months of October, November and February. Polluting traffic is not allowed near the complex and tourists must either walk from parking lots or catch an electric bus. The Khawasspuras (northern courtyards) are currently being restored for use as a new visitor center.

 

The small town to the south of the Taj, known as Taj Ganji or Mumtazabad, was originally constructed with caravanserais, bazaars and markets to serve the needs of visitors and workmen. Lists of recommended travel destinations often feature the Taj Mahal, which also appears in several listings of seven wonders of the modern world, including the recently announced New Seven Wonders of the World, a recent poll with 100 million votes.

 

The grounds are open from 06:00 to 19:00 weekdays, except for Friday when the complex is open for prayers at the mosque between 12:00 and 14:00. The complex is open for night viewing on the day of the full moon and two days before and after, excluding Fridays and the month of Ramadan. For security reasons only five items - water in transparent bottles, small video cameras, still cameras, mobile phones and small ladies' purses - are allowed inside the Taj Mahal.

 

MYTHS

Ever since its construction, the building has been the source of an admiration transcending culture and geography, and so personal and emotional responses have consistently eclipsed scholastic appraisals of the monument. A longstanding myth holds that Shah Jahan planned a mausoleum to be built in black marble as a Black Taj Mahal across the Yamuna river. The idea originates from fanciful writings of Jean-Baptiste Tavernier, a European traveller who visited Agra in 1665. It was suggested that Shah Jahan was overthrown by his son Aurangzeb before it could be built. Ruins of blackened marble across the river in Moonlight Garden, Mahtab Bagh, seemed to support this legend. However, excavations carried out in the 1990s found that they were discolored white stones that had turned black. A more credible theory for the origins of the black mausoleum was demonstrated in 2006 by archaeologists who reconstructed part of the pool in the Moonlight Garden. A dark reflection of the white mausoleum could clearly be seen, befitting Shah Jahan's obsession with symmetry and the positioning of the pool itself.

 

No evidence exists for claims that describe, often in horrific detail, the deaths, dismemberments and mutilations which Shah Jahan supposedly inflicted on various architects and craftsmen associated with the tomb. Some stories claim that those involved in construction signed contracts committing themselves to have no part in any similar design. Similar claims are made for many famous buildings. No evidence exists for claims that Lord William Bentinck, governor-general of India in the 1830s, supposedly planned to demolish the Taj Mahal and auction off the marble. Bentinck's biographer John Rosselli says that the story arose from Bentinck's fund-raising sale of discarded marble from Agra Fort.

 

Another myth suggests that beating the silhouette of the finial will cause water to come forth. To this day, officials find broken bangles surrounding the silhouette.

 

In 2000, India's Supreme Court dismissed P. N. Oak's petition to declare that a Hindu king built the Taj Mahal. In 2005 a similar petition was dismissed by the Allahabad High Court. This case was brought by Amar Nath Mishra, a social worker and preacher who says that the Taj Mahal was built by the Hindu King Parmar Dev in 1196.

 

WIKIPEDIA

success at last.

i also acknowledge some refinements are in order ..

( yes that is my speedlight flash reflecting on the right and i have a shadow on the left )

DOF was a bit shallow too.

But feeling rather "chuffed" with this capture !

 

settings .

 

ƒ/8.0

50.0 mm

1/13s

400 ISO

iOS 8 concept on a supposed iPhone with large screen.

 

Contact:

gschasiepen@me.com

The Taj Mahal (/ˌtɑːdʒ məˈhɑːl/, more often /ˈtɑːʒ/; from Persian and Arabic, "crown of palaces", pronounced [ˈt̪aːdʒ mɛˈɦɛl]) is a white marble mausoleum located on the southern bank of Yamuna River in the Indian city of Agra. It was commissioned in 1632 by the Mughal emperor Shah Jahan (reigned 1628–1658) to house the tomb of his favorite wife of three, Mumtaz Mahal.

 

Construction of the mausoleum was essentially completed in 1643 but work continued on other phases of the project for an additional ten years. The Taj Mahal complex is believed to have been completed in its entirety in 1653 at a cost estimated at the time to be around 32 million Indian rupees, which in 2015 would be valued at around 52.8 billion Indian rupees ($827 million US). The construction project employed around 20,000 artisans under the guidance of a board of architects led by Ustad Ahmad Lahauri. The domed marble tomb is part of an integrated complex consisting of gardens and two red-sandstone buildings surrounded by a crenellated wall on three sides.

 

The Taj Mahal is regarded by many as the best example of Mughal architecture and is widely recognized as "the jewel of Muslim art in India". It is one of the world’s most celebrated structures and a symbol of India’s rich history. Designated a UNESCO World Heritage Site in 1983, the Taj Mahal attracts some 3 million visitors a year.

 

INSPIRATION

In 1631, Shah Jahan, emperor during the Mughal empire's period of greatest prosperity, was grief-stricken when his favorite of three wives and beloved companion, Mumtaz Mahal, a Persian princess, died during the birth of their 14th child, Gauhara Begum. Construction of the Taj Mahal began in 1632. The court chronicles of Shah Jahan's grief illustrate the love story traditionally held as an inspiration for Taj Mahal. The principal mausoleum was completed in 1643 and the surrounding buildings and garden were finished about five years later.

 

ARCHITECTURE AND DESIGN

The Taj Mahal incorporates and expands on design traditions of Persian and earlier Mughal architecture. Specific inspiration came from successful Timurid and Mughal buildings including; the Gur-e Amir (the tomb of Timur, progenitor of the Mughal dynasty, in Samarkand), Humayun's Tomb, Itmad-Ud-Daulah's Tomb (sometimes called the Baby Taj), and Shah Jahan's own Jama Masjid in Delhi. While earlier Mughal buildings were primarily constructed of red sandstone, Shah Jahan promoted the use of white marble inlaid with semi-precious stones. Buildings under his patronage reached new levels of refinement.

 

TOMB

The tomb is the central focus of the entire complex of the Taj Mahal. It is a large, white marble structure standing on a square plinth and consists of a symmetrical building with an iwan (an arch-shaped doorway) topped by a large dome and finial. Like most Mughal tombs, the basic elements are Persian in origin.

 

The base structure is a large multi-chambered cube with chamfered corners forming an unequal eight-sided structure that is approximately 55 metres on each of the four long sides. Each side of the iwan is framed with a huge pishtaq or vaulted archway with two similarly shaped arched balconies stacked on either side. This motif of stacked pishtaqs is replicated on the chamfered corner areas, making the design completely symmetrical on all sides of the building. Four minarets frame the tomb, one at each corner of the plinth facing the chamfered corners. The main chamber houses the false sarcophagi of Mumtaz Mahal and Shah Jahan; the actual graves are at a lower level.

 

The most spectacular feature is the marble dome that surmounts the tomb. The dome is nearly 35 metres high which is close in measurement to the length of the base, and accentuated by the cylindrical "drum" it sits on which is approximately 7 metres high. Because of its shape, the dome is often called an onion dome or amrud (guava dome). The top is decorated with a lotus design which also serves to accentuate its height. The shape of the dome is emphasized by four smaller domed chattris (kiosks) placed at its corners, which replicate the onion shape of the main dome. Their columned bases open through the roof of the tomb and provide light to the interior. Tall decorative spires (guldastas) extend from edges of base walls, and provide visual emphasis to the height of the dome. The lotus motif is repeated on both the chattris and guldastas. The dome and chattris are topped by a gilded finial which mixes traditional Persian and Hindustani decorative elements.

 

The main finial was originally made of gold but was replaced by a copy made of gilded bronze in the early 19th century. This feature provides a clear example of integration of traditional Persian and Hindu decorative elements. The finial is topped by a moon, a typical Islamic motif whose horns point heavenward.

 

The minarets, which are each more than 40 metres tall, display the designer's penchant for symmetry. They were designed as working minarets - a traditional element of mosques, used by the muezzin to call the Islamic faithful to prayer. Each minaret is effectively divided into three equal parts by two working balconies that ring the tower. At the top of the tower is a final balcony surmounted by a chattri that mirrors the design of those on the tomb. The chattris all share the same decorative elements of a lotus design topped by a gilded finial. The minarets were constructed slightly outside of the plinth so that in the event of collapse, a typical occurrence with many tall constructions of the period, the material from the towers would tend to fall away from the tomb.

 

EXTERIOR DECORATIONS

The exterior decorations of the Taj Mahal are among the finest in Mughal architecture. As the surface area changes, the decorations are refined proportionally. The decorative elements were created by applying paint, stucco, stone inlays or carvings. In line with the Islamic prohibition against the use of anthropomorphic forms, the decorative elements can be grouped into either calligraphy, abstract forms or vegetative motifs. Throughout the complex are passages from the Qur'an that comprise some of the decorative elements. Recent scholarship suggests that the passages were chosen by Amanat Khan.

 

The calligraphy on the Great Gate reads "O Soul, thou art at rest. Return to the Lord at peace with Him, and He at peace with you." The calligraphy was created in 1609 by a calligrapher named Abdul Haq. Shah Jahan conferred the title of "Amanat Khan" upon him as a reward for his "dazzling virtuosity". Near the lines from the Qur'an at the base of the interior dome is the inscription, "Written by the insignificant being, Amanat Khan Shirazi." Much of the calligraphy is composed of florid thuluth script made of jasper or black marble inlaid in white marble panels. Higher panels are written in slightly larger script to reduce the skewing effect when viewed from below. The calligraphy found on the marble cenotaphs in the tomb is particularly detailed and delicate.

 

Abstract forms are used throughout, especially in the plinth, minarets, gateway, mosque, jawab and, to a lesser extent, on the surfaces of the tomb. The domes and vaults of the sandstone buildings are worked with tracery of incised painting to create elaborate geometric forms. Herringbone inlays define the space between many of the adjoining elements. White inlays are used in sandstone buildings, and dark or black inlays on the white marbles. Mortared areas of the marble buildings have been stained or painted in a contrasting color which creates a complex array of geometric patterns. Floors and walkways use contrasting tiles or blocks in tessellation patterns.

 

On the lower walls of the tomb are white marble dados sculpted with realistic bas relief depictions of flowers and vines. The marble has been polished to emphasise the exquisite detailing of the carvings. The dado frames and archway spandrels have been decorated with pietra dura inlays of highly stylised, almost geometric vines, flowers and fruits. The inlay stones are of yellow marble, jasper and jade, polished and levelled to the surface of the walls.

 

INTERIOR DECORATION

The interior chamber of the Taj Mahal reaches far beyond traditional decorative elements. The inlay work is not pietra dura, but a lapidary of precious and semiprecious gemstones. The inner chamber is an octagon with the design allowing for entry from each face, although only the door facing the garden to the south is used. The interior walls are about 25 metres high and are topped by a "false" interior dome decorated with a sun motif. Eight pishtaq arches define the space at ground level and, as with the exterior, each lower pishtaq is crowned by a second pishtaq about midway up the wall. The four central upper arches form balconies or viewing areas, and each balcony's exterior window has an intricate screen or jali cut from marble. In addition to the light from the balcony screens, light enters through roof openings covered by chattris at the corners. The octagonal marble screen or jali bordering the cenotaphs is made from eight marble panels carved through with intricate pierce work. The remaining surfaces are inlaid in delicate detail with semi-precious stones forming twining vines, fruits and flowers. Each chamber wall is highly decorated with dado bas-relief, intricate lapidary inlay and refined calligraphy panels which reflect, in miniature detail, the design elements seen throughout the exterior of the complex.

 

Muslim tradition forbids elaborate decoration of graves. Hence, the bodies of Mumtaz and Shah Jahan were put in a relatively plain crypt beneath the inner chamber with their faces turned right, towards Mecca. Mumtaz Mahal's cenotaph is placed at the precise centre of the inner chamber on a rectangular marble base of 1.5 by 2.5 metres. Both the base and casket are elaborately inlaid with precious and semiprecious gems. Calligraphic inscriptions on the casket identify and praise Mumtaz. On the lid of the casket is a raised rectangular lozenge meant to suggest a writing tablet. Shah Jahan's cenotaph is beside Mumtaz's to the western side, and is the only visible asymmetric element in the entire complex. His cenotaph is bigger than his wife's, but reflects the same elements: a larger casket on a slightly taller base precisely decorated with lapidary and calligraphy that identifies him. On the lid of the casket is a traditional sculpture of a small pen box.

 

The pen box and writing tablet are traditional Mughal funerary icons decorating the caskets of men and women respectively. The Ninety Nine Names of God are calligraphic inscriptions on the sides of the actual tomb of Mumtaz Mahal. Other inscriptions inside the crypt include, "O Noble, O Magnificent, O Majestic, O Unique, O Eternal, O Glorious... ". The tomb of Shah Jahan bears a calligraphic inscription that reads; "He travelled from this world to the banquet-hall of Eternity on the night of the twenty-sixth of the month of Rajab, in the year 1076 Hijri."

 

GARDEN

The complex is set around a large 300-metre square charbagh or Mughal garden. The garden uses raised pathways that divide each of the four quarters of the garden into 16 sunken parterres or flowerbeds. Halfway between the tomb and gateway in the center of the garden is a raised marble water tank with a reflecting pool positioned on a north-south axis to reflect the image of the mausoleum. The raised marble water tank is called al Hawd al-Kawthar in reference to the "Tank of Abundance" promised to Muhammad.

 

Elsewhere, the garden is laid out with avenues of trees and fountains. The charbagh garden, a design inspired by Persian gardens, was introduced to India by Babur, the first Mughal emperor. It symbolises the four flowing rivers of Jannah (Paradise) and reflects the Paradise garden derived from the Persian paridaeza, meaning 'walled garden'. In mystic Islamic texts of the Mughal period, Paradise is described as an ideal garden of abundance with four rivers flowing from a central spring or mountain, separating the garden into north, west, south and east.

 

Most Mughal charbaghs are rectangular with a tomb or pavilion in the center. The Taj Mahal garden is unusual in that the main element, the tomb, is located at the end of the garden. With the discovery of Mahtab Bagh or "Moonlight Garden" on the other side of the Yamuna, the interpretation of the Archaeological Survey of India is that the Yamuna river itself was incorporated into the garden's design and was meant to be seen as one of the rivers of Paradise. Similarities in layout and architectural features with the Shalimar Gardens suggests both gardens may have been designed by the same architect, Ali Mardan. Early accounts of the garden describe its profusion of vegetation, including abundant roses, daffodils, and fruit trees. As the Mughal Empire declined, the Taj Mahal and its gardens also declined. By the end of the 19th century, the British Empire controlled more than three-fifths of India, and assumed management of the Taj Mahal. They changed the landscaping to their liking which more closely resembled the formal lawns of London.

 

OUTLYING BUILDINGS

The Taj Mahal complex is bordered on three sides by crenellated red sandstone walls; the side facing the river is open. Outside the walls are several additional mausoleums, including those of Shah Jahan's other wives, and a larger tomb for Mumtaz's favourite servant.

 

The main gateway (darwaza) is a monumental structure built primarily of marble, and reminiscent of the Mughal architecture of earlier emperors. Its archways mirror the shape of the tomb's archways, and its pishtaq arches incorporate the calligraphy that decorates the tomb. The vaulted ceilings and walls have elaborate geometric designs like those found in the other sandstone buildings in the complex.

 

At the far end of the complex are two grand red sandstone buildings that mirror each other, and face the sides of the tomb. The backs of the buildings parallel the western and eastern walls. The western building is a mosque and the other is the jawab (answer), thought to have been constructed for architectural balance although it may have been used as a guesthouse. Distinctions between the two buildings include the jawab's lack of a mihrab (a niche in a mosque's wall facing Mecca), and its floors of geometric design whereas the floor of the mosque is laid with outlines of 569 prayer rugs in black marble. The mosque's basic design of a long hall surmounted by three domes is similar to others built by Shah Jahan, particularly the Masjid-i Jahān-Numā, or Jama Masjid, Delhi. The Mughal mosques of this period divide the sanctuary hall into three areas comprising a main sanctuary and slightly smaller sanctuaries on either side. At the Taj Mahal, each sanctuary opens onto an expansive vaulting dome. The outlying buildings were completed in 1643.

 

CONSTRUCTION

The Taj Mahal is built on a parcel of land to the south of the walled city of Agra. Shah Jahan presented Maharajah Jai Singh with a large palace in the center of Agra in exchange for the land. An area of roughly three acres was excavated, filled with dirt to reduce seepage, and leveled at 50 metres above riverbank. In the tomb area, wells were dug and filled with stone and rubble to form the footings of the tomb. Instead of lashed bamboo, workmen constructed a colossal brick scaffold that mirrored the tomb. The scaffold was so enormous that foremen estimated it would take years to dismantle.

 

The Taj Mahal was constructed using materials from all over India and Asia. It is believed over 1,000 elephants were used to transport building materials. The translucent white marble was brought from Makrana, Rajasthan, the jasper from Punjab, jade and crystal from China. The turquoise was from Tibet and the Lapis lazuli from Afghanistan, while the sapphire came from Sri Lanka and the carnelian from Arabia. In all, twenty eight types of precious and semi-precious stones were inlaid into the white marble.

 

According to the legend, Shah Jahan decreed that anyone could keep the bricks taken from the scaffold, and thus it was dismantled by peasants overnight. A fifteen kilometer tamped-earth ramp was built to transport marble and materials to the construction site and teams of twenty or thirty oxen pulled the blocks on specially constructed wagons. An elaborate post-and-beam pulley system was used to raise the blocks into desired position. Water was drawn from the river by a series of purs, an animal-powered rope and bucket mechanism, into a large storage tank and raised to a large distribution tank. It was passed into three subsidiary tanks, from which it was piped to the complex.

 

The plinth and tomb took roughly 12 years to complete. The remaining parts of the complex took an additional 10 years and were completed in order of minarets, mosque and jawab, and gateway. Since the complex was built in stages, discrepancies exist in completion dates due to differing opinions on "completion". Construction of the mausoleum itself was essentially completed by 1643 while work continued on the outlying buildings. Estimates of the cost of construction vary due to difficulties in estimating costs across time. The total cost has been estimated to be about 32 million Indian rupees, which is around 52.8 billion Indian rupees ($827 million US) based on 2015 values.

 

LATER DAYS

Abdul Hamid Lahauri in his book Badshahnama refers to Taj Mahal as rauza-i munawwara, meaning the illumined or illustrious tomb. Soon after the Taj Mahal's completion, Shah Jahan was deposed by his son Aurangzeb and put under house arrest at nearby Agra Fort. Upon Shah Jahan's death, Aurangzeb buried him in the mausoleum next to his wife. In the 18th century, the Jat rulers of Bharatpur invaded Agra and attacked the Taj Mahal, the two chandeliers, one of agate and another of silver, which were hung over the main cenotaph, were taken away by them, along with the gold and silver screen. Kanbo, a Mughal historian, said the gold shield which covered the 15-foot high finial at the top of the main dome was also removed during the Jat despoliation.

 

By the late 19th century, parts of the buildings had fallen into disrepair. During the time of the Indian rebellion of 1857, the Taj Mahal was defaced by British soldiers and government officials, who chiselled out precious stones and lapis lazuli from its walls. At the end of the 19th century, British viceroy Lord Curzon ordered a sweeping restoration project, which was completed in 1908. He also commissioned the large lamp in the interior chamber, modelled after one in a Cairo mosque. During this time the garden was remodelled with British-style lawns that are still in place today.

 

THREATS

In 1942, the government erected a scaffolding to disguise the building in anticipation of air attacks by the Japanese Air Force. During the India-Pakistan wars of 1965 and 1971, scaffoldings were again erected to mislead bomber pilots.

 

More recent threats have come from environmental pollution on the banks of Yamuna River including acid rain due to the Mathura Oil Refinery, which was opposed by Supreme Court of India directives. The pollution has been turning the Taj Mahal yellow. To help control the pollution, the Indian government has set up the Taj Trapezium Zone (TTZ), a 10,400-square-kilometre area around the monument where strict emissions standards are in place.

 

Concerns for the tomb's structural integrity have recently been raised because of a decline in the groundwater level in the Yamuna river basin which is falling at a rate of around 5 feet a year. In 2010, cracks appeared in parts of the tomb, and the minarets which surround the monument were showing signs of tilting, as the wooden foundation of the tomb may be rotting due to lack of water. In 2011 it was reported that some predictions indicated that the tomb could collapse within 5 years.

 

TOURISM

The Taj Mahal attracts a large number of tourists. UNESCO documented more than 2 million visitors in 2001, which increased to about 3 million in 2015. A two tier pricing system is in place, with a significantly lower entrance fee for Indian citizens and a more expensive one for foreigners. Most tourists visit in the cooler months of October, November and February. Polluting traffic is not allowed near the complex and tourists must either walk from parking lots or catch an electric bus. The Khawasspuras (northern courtyards) are currently being restored for use as a new visitor center.

 

The small town to the south of the Taj, known as Taj Ganji or Mumtazabad, was originally constructed with caravanserais, bazaars and markets to serve the needs of visitors and workmen. Lists of recommended travel destinations often feature the Taj Mahal, which also appears in several listings of seven wonders of the modern world, including the recently announced New Seven Wonders of the World, a recent poll with 100 million votes.

 

The grounds are open from 06:00 to 19:00 weekdays, except for Friday when the complex is open for prayers at the mosque between 12:00 and 14:00. The complex is open for night viewing on the day of the full moon and two days before and after, excluding Fridays and the month of Ramadan. For security reasons only five items - water in transparent bottles, small video cameras, still cameras, mobile phones and small ladies' purses - are allowed inside the Taj Mahal.

 

MYTHS

Ever since its construction, the building has been the source of an admiration transcending culture and geography, and so personal and emotional responses have consistently eclipsed scholastic appraisals of the monument. A longstanding myth holds that Shah Jahan planned a mausoleum to be built in black marble as a Black Taj Mahal across the Yamuna river. The idea originates from fanciful writings of Jean-Baptiste Tavernier, a European traveller who visited Agra in 1665. It was suggested that Shah Jahan was overthrown by his son Aurangzeb before it could be built. Ruins of blackened marble across the river in Moonlight Garden, Mahtab Bagh, seemed to support this legend. However, excavations carried out in the 1990s found that they were discolored white stones that had turned black. A more credible theory for the origins of the black mausoleum was demonstrated in 2006 by archaeologists who reconstructed part of the pool in the Moonlight Garden. A dark reflection of the white mausoleum could clearly be seen, befitting Shah Jahan's obsession with symmetry and the positioning of the pool itself.

 

No evidence exists for claims that describe, often in horrific detail, the deaths, dismemberments and mutilations which Shah Jahan supposedly inflicted on various architects and craftsmen associated with the tomb. Some stories claim that those involved in construction signed contracts committing themselves to have no part in any similar design. Similar claims are made for many famous buildings. No evidence exists for claims that Lord William Bentinck, governor-general of India in the 1830s, supposedly planned to demolish the Taj Mahal and auction off the marble. Bentinck's biographer John Rosselli says that the story arose from Bentinck's fund-raising sale of discarded marble from Agra Fort.

 

Another myth suggests that beating the silhouette of the finial will cause water to come forth. To this day, officials find broken bangles surrounding the silhouette.

 

In 2000, India's Supreme Court dismissed P. N. Oak's petition to declare that a Hindu king built the Taj Mahal. In 2005 a similar petition was dismissed by the Allahabad High Court. This case was brought by Amar Nath Mishra, a social worker and preacher who says that the Taj Mahal was built by the Hindu King Parmar Dev in 1196.

 

WIKIPEDIA

1 2 ••• 39 40 42 44 45 ••• 79 80