View allAll Photos Tagged Multiwii
My (semi)finished quad.
It flies, and it flies well. Adding camera, transmitter and other sensors next.
Turnigy Talon Tricopter V1
Tiger 2216-11 900 KV motors
HK F30A SimonK ESC
FreeFlight 1.2 running Baseflight (MultiWii)
Graupner 10x5 props
GoPro Hero 2 1280x720 50p
eirikso.com
Turnigy Talon Tricopter V1
Tiger 2216-11 900 KV motors
HK F30A SimonK ESC
FreeFlight 1.2 running Baseflight (MultiWii)
Graupner 10x5 props
GoPro Hero 2 1280x720 50p
eirikso.com
Turnigy Talon Tricopter V1
Tiger 2216-11 900 KV motors
HK F30A SimonK ESC
FreeFlight 1.2 running Baseflight (MultiWii)
Graupner 10x5 props
GoPro Hero 2 1280x720 50p
eirikso.com
DJI inovations F330 quad frame
Crius multiwii All in one , baro, 3 axis mag, 3 axis accel, 3 axis gyro
Hobbywing Quattro 20a 4 in 1 esc.
this little quadcopter has the ability to use GPS and bluetooth connections
to a laptop. small enough to fly indoors or outside.
Turnigy Talon Tricopter V1
Tiger 2216-11 900 KV motors
HK F30A SimonK ESC
FreeFlight 1.2 running Baseflight (MultiWii)
Graupner 10x5 props
GoPro Hero 2 1280x720 50p
eirikso.com
Turnigy Talon Tricopter V1
Tiger 2216-11 900 KV motors
HK F30A SimonK ESC
FreeFlight 1.2 running Baseflight (MultiWii)
Graupner 10x5 props
GoPro Hero 2 1280x720 50p
eirikso.com
Turnigy Talon Tricopter V1
Tiger 2216-11 900 KV motors
HK F30A SimonK ESC
FreeFlight 1.2 running Baseflight (MultiWii)
Graupner 10x5 props
GoPro Hero 2 1280x720 50p
eirikso.com
Turnigy Talon Tricopter V1
Tiger 2216-11 900 KV motors
HK F30A SimonK ESC
FreeFlight 1.2 running Baseflight (MultiWii)
Graupner 10x5 props
GoPro Hero 2 1280x720 50p
eirikso.com
Turnigy Talon Tricopter V1
Tiger 2216-11 900 KV motors
HK F30A SimonK ESC
FreeFlight 1.2 running Baseflight (MultiWii)
Graupner 10x5 props
GoPro Hero 2 1280x720 50p
eirikso.com
Turnigy Talon Tricopter V1
Tiger 2216-11 900 KV motors
HK F30A SimonK ESC
FreeFlight 1.2 running Baseflight (MultiWii)
Graupner 10x5 props
GoPro Hero 2 1280x720 50p
eirikso.com
Turnigy Talon Tricopter V1
Tiger 2216-11 900 KV motors
HK F30A SimonK ESC
FreeFlight 1.2 running Baseflight (MultiWii)
Graupner 10x5 props
GoPro Hero 2 1280x720 50p
eirikso.com
Turnigy Talon Tricopter V1
Tiger 2216-11 900 KV motors
HK F30A SimonK ESC
FreeFlight 1.2 running Baseflight (MultiWii)
Graupner 10x5 props
GoPro Hero 2 1280x720 50p
eirikso.com
Sunny Sky 2210 980kv brushless motors
DJI F330 quadcopter frame kit
Orangerx 6ch receiver
nanotech 2200mah 3s lipo cell
Crius SE multiwii AIO 10 DOF controller
control system is a spektrum DX6I 6 channel radio system, here copter is shown without its main props fitted for safety reasons
I finished the rebuild of my quadrocopter this weekend.
It's now flying with 9x4.7 props, a higher landing gear and the MicroWii flight controller, all from flyduino.net/. Stability using the stock MultiWii 2.1 PID settings was excellent!
You can find a video of the maiden flight here: youtu.be/q5j4HReEUaY
I finished the rebuild of my quadrocopter this weekend.
It's now flying with 9x4.7 props, a higher landing gear and the MicroWii flight controller, all from flyduino.net/. Stability using the stock MultiWii 2.1 PID settings was excellent!
You can find a video of the maiden flight here: youtu.be/q5j4HReEUaY
On continue les réglages de PID, en mode level cette fois. La confiance progresse, avec les premières accélérations. Une petit pointe à 31km/h. Toujours aussi fun...Prochaines étapes: vidéo ou réglages GPS?
Trop bon. #Drone #Multiwii #Blackout #MiniH #FPV #Quad #FPV_Racing #Speed
I finished the rebuild of my quadrocopter this weekend.
It's now flying with 9x4.7 props, a higher landing gear and the MicroWii flight controller, all from flyduino.net/. Stability using the stock MultiWii 2.1 PID settings was excellent!
You can find a video of the maiden flight here: youtu.be/q5j4HReEUaY
I finished the rebuild of my quadrocopter this weekend.
It's now flying with 9x4.7 props, a higher landing gear and the MicroWii flight controller, all from flyduino.net/. Stability using the stock MultiWii 2.1 PID settings was excellent!
You can find a video of the maiden flight here: youtu.be/q5j4HReEUaY
Rebuilt SK!TR with some new motors, new frame and a different flight board. More info: www.hovership.com
I finished the rebuild of my quadrocopter this weekend.
It's now flying with 9x4.7 props, a higher landing gear and the MicroWii flight controller, all from flyduino.net/. Stability using the stock MultiWii 2.1 PID settings was excellent!
You can find a video of the maiden flight here: youtu.be/q5j4HReEUaY
I finished the rebuild of my quadrocopter this weekend.
It's now flying with 9x4.7 props, a higher landing gear and the MicroWii flight controller, all from flyduino.net/. Stability using the stock MultiWii 2.1 PID settings was excellent!
You can find a video of the maiden flight here: youtu.be/q5j4HReEUaY
I finished the rebuild of my quadrocopter this weekend.
It's now flying with 9x4.7 props, a higher landing gear and the MicroWii flight controller, all from flyduino.net/. Stability using the stock MultiWii 2.1 PID settings was excellent!
You can find a video of the maiden flight here: youtu.be/q5j4HReEUaY
Mogo 250 Mini H quad, ready for FPV
KK2.0 / Multiwii
1804 Motors
10a Simonk ESCs
ORX Spektrum 6ch RX
LEDs for orientation
*Ready for FPV equipment
More Photos www.flickr.com/search/?tags=mogo&sort=date-posted-des...
I finished the rebuild of my quadrocopter this weekend.
It's now flying with 9x4.7 props, a higher landing gear and the MicroWii flight controller, all from flyduino.net/. Stability using the stock MultiWii 2.1 PID settings was excellent!
You can find a video of the maiden flight here: youtu.be/q5j4HReEUaY
I ordered this display from Wide and it was delivered within 10 days. This display will help to configure the MultiWii quadrocopter in the field.A description is available from the MultiWii forum.
This sensor board dubbed "allinone" sports a nice selection of sensors for a very good price:
HMC5883 Triple Axis Magnetometer
BMA180 Triple Axis Accelerometer
BMP085 Barometric Pressure Sensor
TG3200 Triple-Axis Digital-Output Gyro
I will use this board together with the Seeduino Mega controller I purchased a while ago already. The firmware will likely be MultiWii, as it already supports this IMU. This will replace my current setup (ArduIMU+ v2 flat with a home-grown firmware).
I finished the rebuild of my quadrocopter this weekend.
It's now flying with 9x4.7 props, a higher landing gear and the MicroWii flight controller, all from flyduino.net/. Stability using the stock MultiWii 2.1 PID settings was excellent!
You can find a video of the maiden flight here: youtu.be/q5j4HReEUaY
I ordered this display from Wide and it was delivered within 10 days. This display will help to configure the MultiWii quadrocopter in the field.A description is available from the MultiWii forum.