Early preview (Iteration 3) of an entirely new type of aircraft, no info is on the net yet and won't be for a while. RANGER - 2 Passenger VTOL Hypersonic Plane

www.ioaircraft.com

Drew Blair

www.linkedin.com/in/drew-b-25485312/

Vertical take off and landing - High Supersonic into Hypersonic Realm. Economy cruise above Mach 4, and can accelerate to beyond Mach 8. Non VTOL, could reach LEO. With a range of 5,000+ nm (8,000-10,000nm non vtol). Fuel H2, reducing fuel weight 95%.

Length, 35ft (10.67m), span 18ft (6m).

Propulsion, 2 Unified Turbine Based Combined Cycle. 2 Unified thrust producing gas turbine generators that provide the power for the central lifting fan (electric, not shaft driven) and the rear VTOL.

Estimated market price, $25-$30 million in production. New York to Dubai in an hour.

All based on my own technology advances in Hypersonics which make Lockheed and Boeing look ancient.

-------------

io aircraft, phantom express, phantom works, boeing phantom works, lockheed skunk works, hypersonic weapon, hypersonic missile, scramjet missile, scramjet engineering, scramjet physics, boost glide, tactical glide vehicle, Boeing XS-1, htv, Air-Launched Rapid Response Weapon, (ARRW), hypersonic tactical vehicle, hypersonic plane, hypersonic aircraft, space plane, scramjet, turbine based combined cycle, ramjet, dual mode ramjet, darpa, onr, navair, afrl, air force research lab, defense science, missile defense agency, aerospike,

Advanced Additive Manufacturing for Hypersonic Aircraft

Utilizing new methods of fabrication and construction, make it possible to use additive manufacturing, dramatically reducing the time and costs of producing hypersonic platforms from missiles, aircraft, and space capable craft. Instead of aircraft being produced in piece, then bolted together; small platforms can be produced as a single unit and large platforms can be produces in large section and mated without bolting. These techniques include using exotic materials and advanced assembly processes, with an end result of streamlining the production costs and time for hypersonic aircraft; reducing months of assembly to weeks. Overall, this process greatly reduced the cost for producing hypersonic platforms. Even to such an extent that a Hellfire missile costs apx $100,000 but by utilizing our technologies, replacing it with a Mach 8-10 hypersonic missile of our physics/engineering and that missile would cost roughly $75,000 each delivered.

Materials used for these manufacturing processes are not disclosed, but overall, provides a foundation for extremely high stresses and thermodynamics, ideal for hypersonic platforms. This specific methodology and materials applications is many decades ahead of all known programs. Even to the extend of normalized space flight and re-entry, without concern of thermodynamic failure.

*Note, most entities that are experimenting with additive manufacturing for hypersonic aircraft, this makes it mainstream and standardized processes, which also applies for mass production.

What would normally be measured in years and perhaps a decade to go from drawing board to test flights, is reduced to singular months and ready for production within a year maximum.

Unified Turbine Based Combined Cycle (U-TBCC)

To date, the closest that NASA and industry have achieved for turbine based aircraft to fly at hypersonic velocities is by mounting a turbine into an aircraft and sharing the inlet with a scramjet or rocket based motor. Reaction Engines Sabre is not able to achieve hypersonic velocities and can only transition into a non air breathing rocket for beyond Mach 4.5

However, utilizing Unified Turbine Based Combine Cycle also known as U-TBCC, the two separate platforms are able to share a common inlet and the dual mode ramjet/scramjet is contained within the engine itself, which allows for a much smaller airframe footprint, thus engingeers are able to then design much higher performance aerial platforms for hypersonic flight, including the ability for constructing true single stage to orbit aircraft by utilizing a modification/version that allows for transition to outside atmosphere propulsion without any other propulsion platforms within the aircraft. By transitioning and developing aircraft to use Unified Turbine Based Combined Cycle, this propulsion system opens up new options to replace that airframe deficit for increased fuel capacity and/or payload.

Enhanced Dynamic Cavitation

Dramatically Increasing the efficiency of fuel air mixture for combustion processes at hypersonic velocities within scramjet propulsion platforms. The aspects of these processes are non disclosable.

Dynamic Scramjet Ignition Processes

For optimal scramjet ignition, a process known as Self Start is sought after, but in many cases if the platform becomes out of attitude, the scramjet will ignite. We have already solved this problem which as a result, a scramjet propulsion system can ignite at lower velocities, high velocities, at optimal attitude or not optimal attitude. It doesn't matter, it will ignite anyways at the proper point for maximum thrust capabilities at hypersonic velocities.

Hydrogen vs Kerosene Fuel Sources

Kerosene is an easy fuel to work with, and most western nations developing scramjet platforms use Kerosene for that fact. However, while kerosene has better thermal properties then Hydrogen, Hydrogen is a far superior fuel source in scramjet propulsion flight, do it having a much higher efficiency capability. Because of this aspect, in conjunction with our developments, it allows for a MUCH increased fuel to air mixture, combustion, thrust; and ability for higher speeds; instead of very low hypersonic velocities in the Mach 5-6 range. Instead, Mach 8-10 range, while we have begun developing hypersonic capabilities to exceed 15 in atmosphere within less then 5 years.

Conforming High Pressure Tank Technology for CNG and H2.

As most know in hypersonics, Hydrogen is a superior fuel source, but due to the storage abilities, can only be stored in cylinders thus much less fuel supply. Not anymore, we developed conforming high pressure storage technology for use in aerospace, automotive sectors, maritime, etc; which means any overall shape required for 8,000+ PSI CNG or Hydrogen. For hypersonic platforms, this means the ability to store a much larger volume of hydrogen vs cylinders.

As an example, X-43 flown by Nasa which flew at Mach 9.97. The fuel source was Hydrogen, which is extremely more volatile and combustible then kerosene (JP-7), via a cylinder in the main body. If it had used our technology, that entire section of the airframe would had been an 8,000 PSI H2 tank, which would had yielded 5-6 times the capacity. While the X-43 flew 11 seconds under power at Mach 9.97, at 6 times the fuel capacity would had yielded apx 66 seconds of fuel under power at Mach 9.97. If it had flew slower, around Mach 6, same principles applied would had yielded apx 500 seconds of fuel supply under power (slower speeds required less energy to maintain).

Enhanced Fuel Mixture During Shock Train Interaction

Normally, fuel injection is conducted at the correct insertion point within the shock train for maximum burn/combustion. Our methodologies differ, since almost half the fuel injection is conducted PRE shock train within the isolator, so at the point of isolator injection the fuel enhances the combustion process, which then requires less fuel injection to reach the same level of thrust capabilities.

Improved Bow Shock Interaction

Smoother interaction at hypersonic velocities and mitigating heat/stresses for beyond Mach 6 thermodynamics, which extraordinarily improves Type 3, 4, and 5 shock interaction.

6,000+ Fahrenheit Thermal Resistance

To date, the maximum thermal resistance was tested at AFRL in the spring of 2018, which resulted in a 3,200F thermal resistance for a short duration. This technology, allows for normalized hypersonic thermal resistance of 3,000-3,500F sustained, and up to 6,500F resistance for short endurance, ie 90 seconds or less. 10-20 minute resistance estimate approximately 4,500F +/- 200F.

*** This technology advancement also applies to Aerospike rocket engines, in which it is common for Aerospike's to exceed 4,500-5,000F temperatures, which results in the melting of the reversed bell housing. That melting no longer ocurrs, providing for stable combustion to ocurr for the entire flight envelope

Scramjet Propulsion Side Wall Cooling

With old technologies, side wall cooling is required for hypersonic flight and scramjet propulsion systems, otherwise the isolator and combustion regions of a scramjet would melt, even using advanced ablatives and ceramics, due to their inability to cope with very high temperatures. Using technology we have developed for very high thermodynamics and high stresses, side wall cooling is no longer required, thus removing that variable from the design process and focusing on improved ignition processes and increasing net thrust values.

Lower Threshold for Hypersonic Ignition

Active and adaptive flight dynamics, resulting in the ability for scramjet ignition at a much lower velocity, ie within ramjet envelope, between Mach 2-4, and seamless transition from supersonic to hypersonic flight, ie supersonic ramjet (scramjet). This active and dynamic aspect, has a wide variety of parameters for many flight dynamics, velocities, and altitudes; which means platforms no longer need to be engineered for specific altitude ranges or preset velocities, but those parameters can then be selected during launch configuration and are able to adapt actively in flight.

Dramatically Improved Maneuvering Capabilities at Hypersonic Velocities

Hypersonic vehicles, like their less technologically advanced brethren, use large actuator and the developers hope those controls surfaces do not disintegrate in flight. In reality, it is like rolling the dice, they may or may not survive, hence another reason why the attempt to keep velocities to Mach 6 or below. We have shrunken down control actuators while almost doubling torque and response capabilities specifically for hypersonic dynamics and extreme stresses involved, which makes it possible for maximum input authority for Mach 10 and beyond.

Paradigm Shift in Control Surface Methodologies, Increasing Control Authority (Internal Mechanical Applications)

To date, most control surfaces for hypersonic missile platforms still use fins, similar to lower speed conventional missiles, and some using ducted fins. This is mostly due to lack of comprehension of hypersonic velocities in their own favor. Instead, the body itself incorporates those control surfaces, greatly enhancing the airframe strength, opening up more space for hardware and fuel capacity; while simultaneously enhancing the platforms maneuvering capabilities.

A scramjet missile can then fly like conventional missile platforms, and not straight and level at high altitudes, losing velocity on it's decent trajectory to target. Another added benefit to this aspect, is the ability to extend range greatly, so if anyone elses hypersonic missile platform were developed for 400 mile range, falling out of the sky due to lack of glide capabilities; our platforms can easily reach 600+ miles, with minimal glide deceleration.

The Horrockses Cotton Fairies take you on a tour of the cotton manufacturing processes at three of their Preston Mills - Yard Works, Centenary / New Preston and Fishwick.

This was Horrockses - Crewdson's contribution to the 1920 trade publication Concerning Cotton - A brief account of the aims and achievements of the Amalgamated Cotton Mills Trust Limited and it's component companies.

TO ENLARGE - either:

1. Right-click the image then choose Original or...

2. Select View all sizes from the Actions tab then choose Original

It is chilly and rainy in Arizona for Super Bowl 48 but BMW turned up the heat with their all-electric i3 and hybrid i8 sports car. To add additional flavor to the recipe New England Patriots’ starting corner Kyle Arrington and wife VaShonda Arrington joined the experience for the energetic weekend festivities.

Kyle spent a few days in both vehicles during his activities, which included stops at the Nike Football Super Bowl Hospitality Gifting Suite at the immaculate Scottsdale Resort & Conference Center, the NFL Experience, family outings and dinner with his spouse. Vashonda’s centerpiece moment was raising funds for the Off the Field Player’s Wives Association’s “14th Annual Super Bowl Fashion Show” held at the upscale Scottsdale Fashion Mall. The wives, kids and a handful of former NFL players walked the runway with grace and style. Guests included Holly Robinson Peete, Antonio Cromardie, Steve Young, Kevin Hart and many more. She enjoyed the earthly interior of the i3 and spoke passionately about the need regarding increased sustainability in the world.

The mind is driven by thoughts and fueled by inventive answers. The i3 is 100% pure electric and the i8 is a plug-in hybrid sports car, which means its power is sourced from both gasoline and electricity. The i8 is comprised of a Life module and a Drive module. The 3-liter gasoline motor is placed in the rear and the smaller electric engine is housed up front. In addition, the i8 is essentially an AWD vehicle channeling traction from both axles simultaneously but doesn’t utilize the company’s hallmark xDrive system. A few common i8 performance specs include:

•0 to 60 mph = 4.2 seconds

•Top speed = 155 mph (electronically limited)

•Electric only top speed = 75 mph

•Pure electric range = 22 miles

Born electric, the i3 is engineered with BMW’s LifeDrive architecture, which is also structured into two categories, the Life Module and the Drive Module. Comprised of high-strength carbon, the Life Module protects and provides comfort for the driver and passengers. The second platform, the Drive Module, encompasses the electric drive system, the suspension and the HVAC. Since the car is lighter, the liquid-cooled lithium-ion battery (developed in-house by BMW) is smaller and only needs three hours for a full stage-2 (240-volt) charge. Additionally, BMW attempts to use as much renewable energy as possible for the manufacturing process of the carbon fiber i3.

The journey continues towards educating the world on the benefits of going green. BMW is both an innovator and leader in this technology category and has already spearheaded a positive movement. Expect more BMW i products down the line since they have only just begun.

Escultura Splash Expo Zaragoza 2008

La escultura Splash es una escultura de 21 m de altura diseñada por Program Collective y desarrollada mediante fluidos y dinámicas por Pere Gifre para la Exposición Internacional de Zaragoza de 2008; a partir del concepto de diseñadores Program Collective formado por: Mona Kim, Todd Palmer, Olga Subirós y Simon Taylor, para la exposición diseñada por Program Collective “Agua para la vida” en el Edificio Torre del Agua.

El cálculo de las estructuras a cargo del ingeniero José Maria Velasco de AMATRIA y la construcción por PQC bajo la dirección de PROGRAM COLLECTIVE.

Características Técnicas

La escultura estaba formada por 135 piezas distintas que se sujetaban mediante cables a la parte superior del edificio Torre del Agua. Estas piezas fueron diseñadas íntegramente por ordenador por Pere Gifre representado una gota de agua impactando en una superficie.

Proceso de Desarrollo

Mediante la utilización de efectos visuales (efectos especiales) Pere Gifre generó un fluido y mediante procesos de Diseño asistido por computador se adaptaron para su fabricación.

El proceso de fabricación realizado por PQC en sus instalaciones en MADRID combina la Fabricación asistida por computadora con procesos artesanales para generar los volúmenes finales que posteriormente fueron transportados e instalados en la Torre del Agua dentro de la Exposición Internacional de Zaragoza de 2008 SPAIN.

Splash Sculpture Expo Zaragoza 2008

The Splash sculpture is a sculpture of 21 m in height and designed by Collective Program developed by fluid and dynamic by Pere Gifre for Expo Zaragoza 2008; from Program Collective designers concept formed by Mona Kim, Todd Palmer, Simon Taylor and Olga Subirós for the exhibition designed by Program Collective "Water for Life" in the Water Tower Building.

The calculation of the structures in charge of the engineer José Maria Velasco of Amatria and construction under the direction of PQC PROGRAM COLLECTIVE.

Technical Characteristics

The sculpture was made up of 135 different pieces that were attached by wires to the top of the Water Tower building. These pieces were designed entirely by computer by Pere Gifre represented a drop of water hitting a surface.

Development process

Using visual effects (special effects) Pere Gifre fluid generated by processes of computer aided design adapted for manufacturing.

The manufacturing process performed by PQC at facilities in MADRID combines computer aided manufacturing with traditional processes to generate the final volumes were subsequently transported and installed at the Water Tower in the International Expo Zaragoza 2008 SPAIN.

Lisa Glover Chipboard dinosaur

Mouth shut, lest one drools. See also manufacturing process of Jilipi

Calcutta, India 6.5.2007 / 20:14

BlueEdge - Mach 8-10 Hypersonic Commercial Aircraft, 210 Passenger Hypersonic Plane - Iteration 2

Seating: 210 | Crew 2+4

Length: 195ft | Span: 93ft

Engines: 4 U-TBCC (Unified Turbine Based Combined Cycle) +1 Aerospike for sustained 2G acceleration to Mach 10.

Fuel: H2 (Compressed Hydrogen)

Cruising Altitude: 100,000-125,000ft

Airframe: 75% Proprietary Composites

Operating Costs, Similar to a 737. $7,000-$15,000hr, including averaged maintenence costs

Iteration 2

IO Aircraft www.ioaircraft.com

Drew Blair www.linkedin.com/in/drew-b-25485312/

-----------------------------

hypersonic plane, hypersonic aircraft, hypersonic commercial plane, hypersonic commercial aircraft, hypersonic airline, tbcc, glide breaker, fighter plane, hyperonic fighter, boeing phantom express, phantom works, boeing phantom works, lockheed skunk works, hypersonic weapon, hypersonic missile, scramjet missile, scramjet engineering, scramjet physics, boost glide, tactical glide vehicle, Boeing XS-1, htv, Air Launched Rapid Response Weapon, (ARRW), hypersonic tactical vehicle, space plane, scramjet, turbine based combined cycle, ramjet, dual mode ramjet, darpa, onr, navair, afrl, air force research lab, office of naval research, defense advanced research project agency, defense science, missile defense agency, aerospike, hydrogen, hydrogen storage, hydrogen fueled, hydrogen aircraft

-----------------------------

Unified Turbine Based Combined Cycle. Current technologies and what Lockheed is trying to force on the Dept of Defense, for that low speed Mach 5 plane DOD gave them $1 billion to build and would disintegrate above Mach 5, is TBCC. 2 separate propulsion systems in the same airframe, which requires TWICE the airframe space to use.

Unified Turbine Based Combined Cycle is 1 propulsion system cutting that airframe deficit in half, and also able to operate above Mach 10 up to Mach 15 in atmosphere, and a simple nozzle modification allows for outside atmosphere rocket mode, ie orbital capable.

Additionally, Reaction Engines maximum air breather mode is Mach 4.5, above that it will explode in flight from internal pressures are too high to operate. Thus, must switch to non air breather rocket mode to operate in atmosphere in hypersonic velocities. Which as a result, makes it not feasible for anything practical. It also takes an immense amount of fuel to function.

-------------

Advanced Additive Manufacturing for Hypersonic Aircraft

Utilizing new methods of fabrication and construction, make it possible to use additive manufacturing, dramatically reducing the time and costs of producing hypersonic platforms from missiles, aircraft, and space capable craft. Instead of aircraft being produced in piece, then bolted together; small platforms can be produced as a single unit and large platforms can be produces in large section and mated without bolting. These techniques include using exotic materials and advanced assembly processes, with an end result of streamlining the production costs and time for hypersonic aircraft; reducing months of assembly to weeks. Overall, this process greatly reduced the cost for producing hypersonic platforms. Even to such an extent that a Hellfire missile costs apx $100,000 but by utilizing our technologies, replacing it with a Mach 8-10 hypersonic missile of our physics/engineering and that missile would cost roughly $75,000 each delivered.

Materials used for these manufacturing processes are not disclosed, but overall, provides a foundation for extremely high stresses and thermodynamics, ideal for hypersonic platforms. This specific methodology and materials applications is many decades ahead of all known programs. Even to the extend of normalized space flight and re-entry, without concern of thermodynamic failure.

*Note, most entities that are experimenting with additive manufacturing for hypersonic aircraft, this makes it mainstream and standardized processes, which also applies for mass production.

What would normally be measured in years and perhaps a decade to go from drawing board to test flights, is reduced to singular months and ready for production within a year maximum.

Unified Turbine Based Combined Cycle (U-TBCC)

To date, the closest that NASA and industry have achieved for turbine based aircraft to fly at hypersonic velocities is by mounting a turbine into an aircraft and sharing the inlet with a scramjet or rocket based motor. Reaction Engines Sabre is not able to achieve hypersonic velocities and can only transition into a non air breathing rocket for beyond Mach 4.5

However, utilizing Unified Turbine Based Combine Cycle also known as U-TBCC, the two separate platforms are able to share a common inlet and the dual mode ramjet/scramjet is contained within the engine itself, which allows for a much smaller airframe footprint, thus engingeers are able to then design much higher performance aerial platforms for hypersonic flight, including the ability for constructing true single stage to orbit aircraft by utilizing a modification/version that allows for transition to outside atmosphere propulsion without any other propulsion platforms within the aircraft. By transitioning and developing aircraft to use Unified Turbine Based Combined Cycle, this propulsion system opens up new options to replace that airframe deficit for increased fuel capacity and/or payload.

Enhanced Dynamic Cavitation

Dramatically Increasing the efficiency of fuel air mixture for combustion processes at hypersonic velocities within scramjet propulsion platforms. The aspects of these processes are non disclosable.

Dynamic Scramjet Ignition Processes

For optimal scramjet ignition, a process known as Self Start is sought after, but in many cases if the platform becomes out of attitude, the scramjet will ignite. We have already solved this problem which as a result, a scramjet propulsion system can ignite at lower velocities, high velocities, at optimal attitude or not optimal attitude. It doesn't matter, it will ignite anyways at the proper point for maximum thrust capabilities at hypersonic velocities.

Hydrogen vs Kerosene Fuel Sources

Kerosene is an easy fuel to work with, and most western nations developing scramjet platforms use Kerosene for that fact. However, while kerosene has better thermal properties then Hydrogen, Hydrogen is a far superior fuel source in scramjet propulsion flight, do it having a much higher efficiency capability. Because of this aspect, in conjunction with our developments, it allows for a MUCH increased fuel to air mixture, combustion, thrust; and ability for higher speeds; instead of very low hypersonic velocities in the Mach 5-6 range. Instead, Mach 8-10 range, while we have begun developing hypersonic capabilities to exceed 15 in atmosphere within less then 5 years.

Conforming High Pressure Tank Technology for CNG and H2.

As most know in hypersonics, Hydrogen is a superior fuel source, but due to the storage abilities, can only be stored in cylinders thus much less fuel supply. Not anymore, we developed conforming high pressure storage technology for use in aerospace, automotive sectors, maritime, etc; which means any overall shape required for 8,000+ PSI CNG or Hydrogen. For hypersonic platforms, this means the ability to store a much larger volume of hydrogen vs cylinders.

As an example, X-43 flown by Nasa which flew at Mach 9.97. The fuel source was Hydrogen, which is extremely more volatile and combustible then kerosene (JP-7), via a cylinder in the main body. If it had used our technology, that entire section of the airframe would had been an 8,000 PSI H2 tank, which would had yielded 5-6 times the capacity. While the X-43 flew 11 seconds under power at Mach 9.97, at 6 times the fuel capacity would had yielded apx 66 seconds of fuel under power at Mach 9.97. If it had flew slower, around Mach 6, same principles applied would had yielded apx 500 seconds of fuel supply under power (slower speeds required less energy to maintain).

Enhanced Fuel Mixture During Shock Train Interaction

Normally, fuel injection is conducted at the correct insertion point within the shock train for maximum burn/combustion. Our methodologies differ, since almost half the fuel injection is conducted PRE shock train within the isolator, so at the point of isolator injection the fuel enhances the combustion process, which then requires less fuel injection to reach the same level of thrust capabilities.

Improved Bow Shock Interaction

Smoother interaction at hypersonic velocities and mitigating heat/stresses for beyond Mach 6 thermodynamics, which extraordinarily improves Type 3, 4, and 5 shock interaction.

6,000+ Fahrenheit Thermal Resistance

To date, the maximum thermal resistance was tested at AFRL in the spring of 2018, which resulted in a 3,200F thermal resistance for a short duration. This technology, allows for normalized hypersonic thermal resistance of 3,000-3,500F sustained, and up to 6,500F resistance for short endurance, ie 90 seconds or less. 10-20 minute resistance estimate approximately 4,500F +/- 200F.

*** This technology advancement also applies to Aerospike rocket engines, in which it is common for Aerospike's to exceed 4,500-5,000F temperatures, which results in the melting of the reversed bell housing. That melting no longer ocurrs, providing for stable combustion to ocurr for the entire flight envelope

Scramjet Propulsion Side Wall Cooling

With old technologies, side wall cooling is required for hypersonic flight and scramjet propulsion systems, otherwise the isolator and combustion regions of a scramjet would melt, even using advanced ablatives and ceramics, due to their inability to cope with very high temperatures. Using technology we have developed for very high thermodynamics and high stresses, side wall cooling is no longer required, thus removing that variable from the design process and focusing on improved ignition processes and increasing net thrust values.

Lower Threshold for Hypersonic Ignition

Active and adaptive flight dynamics, resulting in the ability for scramjet ignition at a much lower velocity, ie within ramjet envelope, between Mach 2-4, and seamless transition from supersonic to hypersonic flight, ie supersonic ramjet (scramjet). This active and dynamic aspect, has a wide variety of parameters for many flight dynamics, velocities, and altitudes; which means platforms no longer need to be engineered for specific altitude ranges or preset velocities, but those parameters can then be selected during launch configuration and are able to adapt actively in flight.

Dramatically Improved Maneuvering Capabilities at Hypersonic Velocities

Hypersonic vehicles, like their less technologically advanced brethren, use large actuator and the developers hope those controls surfaces do not disintegrate in flight. In reality, it is like rolling the dice, they may or may not survive, hence another reason why the attempt to keep velocities to Mach 6 or below. We have shrunken down control actuators while almost doubling torque and response capabilities specifically for hypersonic dynamics and extreme stresses involved, which makes it possible for maximum input authority for Mach 10 and beyond.

Paradigm Shift in Control Surface Methodologies, Increasing Control Authority (Internal Mechanical Applications)

To date, most control surfaces for hypersonic missile platforms still use fins, similar to lower speed conventional missiles, and some using ducted fins. This is mostly due to lack of comprehension of hypersonic velocities in their own favor. Instead, the body itself incorporates those control surfaces, greatly enhancing the airframe strength, opening up more space for hardware and fuel capacity; while simultaneously enhancing the platforms maneuvering capabilities.

A scramjet missile can then fly like conventional missile platforms, and not straight and level at high altitudes, losing velocity on it's decent trajectory to target. Another added benefit to this aspect, is the ability to extend range greatly, so if anyone elses hypersonic missile platform were developed for 400 mile range, falling out of the sky due to lack of glide capabilities; our platforms can easily reach 600+ miles, with minimal glide deceleration.

Hyperion, Hypersonic Mach 15 Scramjet Missile - IO Aircraft - ARRW, HAWC, Air Launched Rapid Response Weapon

Length: 120" / Span 25"

www.ioaircraft.com

Scramjet, Hypersonic, ARRW, HAWC, Air Launched Rapid Response Weapon, Scramjet Physics, Scramjet Engineering, Hypersonic Missile, hypersonic weapon, hypersonic fighter, hypersonic fighter plane, tgv, tactical glide vehicle, hypersonic commercial aircraft, hypersonic commercial plane, hypersonic aircraft, hypersonic plane, hypersonic airline, tbcc, glide breaker, fighter plane, hypersonic fighter, boeing phantom express, phantom works, boeing phantom works, lockheed skunk works, boost glide, tactical glide vehicle, space plane, scramjet, turbine based combined cycle, ramjet, dual mode ramjet, defense science, missile defense agency, aerospike, hydrogen aircraft, airlines, military, physics, airline, aerion supersonic, aerion, spike aerospace, boom supersonic, , darpa, onr, navair, afrl, air force research lab, office of naval research, defense advanced research project agency, afosr, socom, arl, army future command, mda, missile defense agenci, dia, defense intelligence agency, Air Force Office of Scientific Research,

Iteration V8, Hyperion Mach 15 #hypersonic #scramjet (50% faster then the X-43 #nasa), 300% faster than #Lockheed, #NorthropGrumman, #Raytheon, and Boeing. Much is sanitized as the technology advances are dramatic and not public.

DOD's funding of #AGM-183A / Air Launched Rapid Response Weapon, the poeple developing it barely comprehend student level capabilities and 50/50 it will disintegrate even at Mach 5. China and Russia, already much faster and higher tech making it obsolete already, India's recent test, apx 700 mph faster.

Summarized details are accurate

#hypersonic #hypersonics #scramjet #hypersonicplane #hypersonicaircraft #skunkworks #spaceplane #boeing #lockheed #raytheon #bae #bombardier #airbus #northopgrumman #generaldynamics #utc #ge #afrl #onr #afosr #ReactionEngines #spacex #virginorbit #usaf #darpa #mda #rollsroyce #nasa #tesla #safran #embraer #AirLaunchedRapidResponseWeapon #additivemanufacturing #military #physics #3dprinting #supersonic #ramjet #tbcc #collinsaerospace #rockwell #phantomworks #hypersonicmissile #alrrw #boeingphantomworks #generalatomics #cessna #dassault #arl #unitedlaunchalliance #spaceshipcompany #navair #diu #dia #usaf #unitedtechnologies #defenseadvancedresearchprojectagency #graphene #additivemanufacturing

-----------------------------

Unified Turbine Based Combined Cycle. Current technologies and what Lockheed is trying to force on the Dept of Defense, for that low speed Mach 5 plane DOD gave them $1 billion to build and would disintegrate above Mach 5, is TBCC. 2 separate propulsion systems in the same airframe, which requires TWICE the airframe space to use.

Unified Turbine Based Combined Cycle is 1 propulsion system cutting that airframe deficit in half, and also able to operate above Mach 10 up to Mach 15 in atmosphere, and a simple nozzle modification allows for outside atmosphere rocket mode, ie orbital capable.

Additionally, Reaction Engines maximum air breather mode is Mach 4.5, above that it will explode in flight from internal pressures are too high to operate. Thus, must switch to non air breather rocket mode to operate in atmosphere in hypersonic velocities. Which as a result, makes it not feasible for anything practical. It also takes an immense amount of fuel to function.

-------------

Advanced Additive Manufacturing for Hypersonic Aircraft

Utilizing new methods of fabrication and construction, make it possible to use additive manufacturing, dramatically reducing the time and costs of producing hypersonic platforms from missiles, aircraft, and space capable craft. Instead of aircraft being produced in piece, then bolted together; small platforms can be produced as a single unit and large platforms can be produces in large section and mated without bolting. These techniques include using exotic materials and advanced assembly processes, with an end result of streamlining the production costs and time for hypersonic aircraft; reducing months of assembly to weeks. Overall, this process greatly reduced the cost for producing hypersonic platforms. Even to such an extent that a Hellfire missile costs apx $100,000 but by utilizing our technologies, replacing it with a Mach 8-10 hypersonic missile of our physics/engineering and that missile would cost roughly $75,000 each delivered.

Materials used for these manufacturing processes are not disclosed, but overall, provides a foundation for extremely high stresses and thermodynamics, ideal for hypersonic platforms. This specific methodology and materials applications is many decades ahead of all known programs. Even to the extend of normalized space flight and re-entry, without concern of thermodynamic failure.

*Note, most entities that are experimenting with additive manufacturing for hypersonic aircraft, this makes it mainstream and standardized processes, which also applies for mass production.

What would normally be measured in years and perhaps a decade to go from drawing board to test flights, is reduced to singular months and ready for production within a year maximum.

Unified Turbine Based Combined Cycle (U-TBCC)

To date, the closest that NASA and industry have achieved for turbine based aircraft to fly at hypersonic velocities is by mounting a turbine into an aircraft and sharing the inlet with a scramjet or rocket based motor. Reaction Engines Sabre is not able to achieve hypersonic velocities and can only transition into a non air breathing rocket for beyond Mach 4.5

However, utilizing Unified Turbine Based Combine Cycle also known as U-TBCC, the two separate platforms are able to share a common inlet and the dual mode ramjet/scramjet is contained within the engine itself, which allows for a much smaller airframe footprint, thus engingeers are able to then design much higher performance aerial platforms for hypersonic flight, including the ability for constructing true single stage to orbit aircraft by utilizing a modification/version that allows for transition to outside atmosphere propulsion without any other propulsion platforms within the aircraft. By transitioning and developing aircraft to use Unified Turbine Based Combined Cycle, this propulsion system opens up new options to replace that airframe deficit for increased fuel capacity and/or payload.

Enhanced Dynamic Cavitation

Dramatically Increasing the efficiency of fuel air mixture for combustion processes at hypersonic velocities within scramjet propulsion platforms. The aspects of these processes are non disclosable.

Dynamic Scramjet Ignition Processes

For optimal scramjet ignition, a process known as Self Start is sought after, but in many cases if the platform becomes out of attitude, the scramjet will ignite. We have already solved this problem which as a result, a scramjet propulsion system can ignite at lower velocities, high velocities, at optimal attitude or not optimal attitude. It doesn't matter, it will ignite anyways at the proper point for maximum thrust capabilities at hypersonic velocities.

Hydrogen vs Kerosene Fuel Sources

Kerosene is an easy fuel to work with, and most western nations developing scramjet platforms use Kerosene for that fact. However, while kerosene has better thermal properties then Hydrogen, Hydrogen is a far superior fuel source in scramjet propulsion flight, do it having a much higher efficiency capability. Because of this aspect, in conjunction with our developments, it allows for a MUCH increased fuel to air mixture, combustion, thrust; and ability for higher speeds; instead of very low hypersonic velocities in the Mach 5-6 range. Instead, Mach 8-10 range, while we have begun developing hypersonic capabilities to exceed 15 in atmosphere within less then 5 years.

Conforming High Pressure Tank Technology for CNG and H2.

As most know in hypersonics, Hydrogen is a superior fuel source, but due to the storage abilities, can only be stored in cylinders thus much less fuel supply. Not anymore, we developed conforming high pressure storage technology for use in aerospace, automotive sectors, maritime, etc; which means any overall shape required for 8,000+ PSI CNG or Hydrogen. For hypersonic platforms, this means the ability to store a much larger volume of hydrogen vs cylinders.

As an example, X-43 flown by Nasa which flew at Mach 9.97. The fuel source was Hydrogen, which is extremely more volatile and combustible then kerosene (JP-7), via a cylinder in the main body. If it had used our technology, that entire section of the airframe would had been an 8,000 PSI H2 tank, which would had yielded 5-6 times the capacity. While the X-43 flew 11 seconds under power at Mach 9.97, at 6 times the fuel capacity would had yielded apx 66 seconds of fuel under power at Mach 9.97. If it had flew slower, around Mach 6, same principles applied would had yielded apx 500 seconds of fuel supply under power (slower speeds required less energy to maintain).

Enhanced Fuel Mixture During Shock Train Interaction

Normally, fuel injection is conducted at the correct insertion point within the shock train for maximum burn/combustion. Our methodologies differ, since almost half the fuel injection is conducted PRE shock train within the isolator, so at the point of isolator injection the fuel enhances the combustion process, which then requires less fuel injection to reach the same level of thrust capabilities.

Improved Bow Shock Interaction

Smoother interaction at hypersonic velocities and mitigating heat/stresses for beyond Mach 6 thermodynamics, which extraordinarily improves Type 3, 4, and 5 shock interaction.

6,000+ Fahrenheit Thermal Resistance

To date, the maximum thermal resistance was tested at AFRL in the spring of 2018, which resulted in a 3,200F thermal resistance for a short duration. This technology, allows for normalized hypersonic thermal resistance of 3,000-3,500F sustained, and up to 6,500F resistance for short endurance, ie 90 seconds or less. 10-20 minute resistance estimate approximately 4,500F +/- 200F.

*** This technology advancement also applies to Aerospike rocket engines, in which it is common for Aerospike's to exceed 4,500-5,000F temperatures, which results in the melting of the reversed bell housing. That melting no longer ocurrs, providing for stable combustion to ocurr for the entire flight envelope

Scramjet Propulsion Side Wall Cooling

With old technologies, side wall cooling is required for hypersonic flight and scramjet propulsion systems, otherwise the isolator and combustion regions of a scramjet would melt, even using advanced ablatives and ceramics, due to their inability to cope with very high temperatures. Using technology we have developed for very high thermodynamics and high stresses, side wall cooling is no longer required, thus removing that variable from the design process and focusing on improved ignition processes and increasing net thrust values.

Lower Threshold for Hypersonic Ignition

Active and adaptive flight dynamics, resulting in the ability for scramjet ignition at a much lower velocity, ie within ramjet envelope, between Mach 2-4, and seamless transition from supersonic to hypersonic flight, ie supersonic ramjet (scramjet). This active and dynamic aspect, has a wide variety of parameters for many flight dynamics, velocities, and altitudes; which means platforms no longer need to be engineered for specific altitude ranges or preset velocities, but those parameters can then be selected during launch configuration and are able to adapt actively in flight.

Dramatically Improved Maneuvering Capabilities at Hypersonic Velocities

Hypersonic vehicles, like their less technologically advanced brethren, use large actuator and the developers hope those controls surfaces do not disintegrate in flight. In reality, it is like rolling the dice, they may or may not survive, hence another reason why the attempt to keep velocities to Mach 6 or below. We have shrunken down control actuators while almost doubling torque and response capabilities specifically for hypersonic dynamics and extreme stresses involved, which makes it possible for maximum input authority for Mach 10 and beyond.

Paradigm Shift in Control Surface Methodologies, Increasing Control Authority (Internal Mechanical Applications)

To date, most control surfaces for hypersonic missile platforms still use fins, similar to lower speed conventional missiles, and some using ducted fins. This is mostly due to lack of comprehension of hypersonic velocities in their own favor. Instead, the body itself incorporates those control surfaces, greatly enhancing the airframe strength, opening up more space for hardware and fuel capacity; while simultaneously enhancing the platforms maneuvering capabilities.

A scramjet missile can then fly like conventional missile platforms, and not straight and level at high altitudes, losing velocity on it's decent trajectory to target. Another added benefit to this aspect, is the ability to extend range greatly, so if anyone elses hypersonic missile platform were developed for 400 mile range, falling out of the sky due to lack of glide capabilities; our platforms can easily reach 600+ miles, with minimal glide deceleration.

The Horrockses Cotton Fairies take you on a tour of the cotton manufacturing processes at three of their Preston Mills - Yard Works, Centenary / New Preston and Fishwick.

This was Horrockses - Crewdson's contribution to the 1920 trade publication Concerning Cotton - A brief account of the aims and achievements of the Amalgamated Cotton Mills Trust Limited and it's component companies.

TO ENLARGE - either:

1. Right-click the image then choose Original or...

2. Select View all sizes from the Actions tab then choose Original

The Horrockses Cotton Fairies take you on a tour of the cotton manufacturing processes at three of their Preston Mills - Yard Works, Centenary / New Preston and Fishwick.

This was Horrockses - Crewdson's contribution to the 1920 trade publication Concerning Cotton - A brief account of the aims and achievements of the Amalgamated Cotton Mills Trust Limited and it's component companies.

TO ENLARGE - either:

1. Right-click the image then choose Original or...

2. Select View all sizes from the Actions tab then choose Original

The Horrockses Cotton Fairies take you on a tour of the cotton manufacturing processes at three of their Preston Mills - Yard Works, Centenary / New Preston and Fishwick.

This was Horrockses - Crewdson's contribution to the 1920 trade publication Concerning Cotton - A brief account of the aims and achievements of the Amalgamated Cotton Mills Trust Limited and it's component companies.

TO ENLARGE - either:

1. Right-click the image then choose Original or...

2. Select View all sizes from the Actions tab then choose Original

The Horrockses Cotton Fairies take you on a tour of the cotton manufacturing processes at three of their Preston Mills - Yard Works, Centenary / New Preston and Fishwick.

This was Horrockses - Crewdson's contribution to the 1920 trade publication Concerning Cotton - A brief account of the aims and achievements of the Amalgamated Cotton Mills Trust Limited and it's component companies.

TO ENLARGE - either:

1. Right-click the image then choose Original or...

2. Select View all sizes from the Actions tab then choose Original

The research space at Sector 7 of the Advanced Photon Source at Argonne National Laboratory is the only X-ray beamline in the world dedicated to fuel injection studies. The auto and aerospace industries and military use the system to study ways to make engines more fuel efficient and stable as well as to test new types of alternative fuels.

The injection system also aids in studies of spray systems, such as those used in manufacturing processes and industrial paint and coating equipment. The black foam at the center of the picture covers a rocket injector-system for the NASA rocket Morpheus that will be tested. November 2014.

Photograph Courtesy of Argonne National Laboratory

www.majesticfuton.com/

Vancouver Majestic Sit and Sleep | Latex Mattresses Vancouver 604-731-8226

Since 1985 Majestic has been helping you sleep well and save space at affordable prices. Twenty five years later and our product lines have grown to include Vancouver's largest selection of Green Living Mattresses, dining sets, solid hardwood bedroom suites and

of course, space saving futons.

Vancouver Family owned and operated since 1985, Majestic Sit & Sleep is committed to our customers and our environment. At Majestic Sit & Sleep we strive to be your leaders in alternative sleep.

Our new line of green living mattresses help to lower the CO2 levels in the air all while getting you the rest you deserve in a healthy, clean sleeping environment.

Small Space? We have the solution! We carry a large selection of futons and sofa beds whether it's for you, the last minute guest or the usual suspects we have something that fits!

Futons: Design it your Way

Step 1 - Choose your favorite design from our wide selection of pine, hardwood or metal frames.

Step 2 - Choose your level of comfort from our luxurious pillowtop futons to our more economical mattresses. Firm or soft, we are your futon specialist!

Step 3 - Finally it's time for that added touch just for you. Choose from a wide variety of fabrics that fit in your home...it's like having a custom made sofa without the BIG price tag.

Quality Assured we offer warranties on all our products and most all of our furniture is manufactured to our specifications!

Nature's Embrace Organic Baby

100% Organic Latex crib mattress

Baby's are precious and require proper nutrion and love to grow up strong and healthy. Generic mattresses use harmful chemicals and cheap materials in the manufacturing process. Nature's Embrace Organic Baby uses only the finest organic materials for your baby to sleep on, to assure your baby is sleeping in the healthiest sleep environment possible.

Made from:

100% Certified Organic Cotton, 100% Certified Organic Natural Dunlop latex.

More Natural Options coming soon!

www.majesticfuton.com/

Vancouver Majestic Sit and Sleep

Located: 1828 West 4th Avenue,

Vancouver BC Canada

Phone: 604-731-8226

email: majesticfuton@telus.net

Vancouver's largest futon and mattress store!

We look forward to seeing you soon!

"Vancouver Majestic Sit and Sleep" "Latex Mattresses Vancouver" "Futons Vancouver" "Green Living Mattresses"

Hyperion, Hypersonic Mach 15 Scramjet Missile - IO Aircraft - ARRW, HAWC, Air Launched Rapid Response Weapon

Length: 120" / Span 25"

www.ioaircraft.com

Scramjet, Hypersonic, ARRW, HAWC, Air Launched Rapid Response Weapon, Scramjet Physics, Scramjet Engineering, Hypersonic Missile, hypersonic weapon, hypersonic fighter, hypersonic fighter plane, tgv, tactical glide vehicle, hypersonic commercial aircraft, hypersonic commercial plane, hypersonic aircraft, hypersonic plane, hypersonic airline, tbcc, glide breaker, fighter plane, hypersonic fighter, boeing phantom express, phantom works, boeing phantom works, lockheed skunk works, boost glide, tactical glide vehicle, space plane, scramjet, turbine based combined cycle, ramjet, dual mode ramjet, defense science, missile defense agency, aerospike, hydrogen aircraft, airlines, military, physics, airline, aerion supersonic, aerion, spike aerospace, boom supersonic, , darpa, onr, navair, afrl, air force research lab, office of naval research, defense advanced research project agency, afosr, socom, arl, army future command, mda, missile defense agenci, dia, defense intelligence agency, Air Force Office of Scientific Research,

Iteration V8, Hyperion Mach 15 #hypersonic #scramjet (50% faster then the X-43 #nasa), 300% faster than #Lockheed, #NorthropGrumman, #Raytheon, and Boeing. Much is sanitized as the technology advances are dramatic and not public.

DOD's funding of #AGM-183A / Air Launched Rapid Response Weapon, the poeple developing it barely comprehend student level capabilities and 50/50 it will disintegrate even at Mach 5. China and Russia, already much faster and higher tech making it obsolete already, India's recent test, apx 700 mph faster.

Summarized details are accurate

#hypersonic #hypersonics #scramjet #hypersonicplane #hypersonicaircraft #skunkworks #spaceplane #boeing #lockheed #raytheon #bae #bombardier #airbus #northopgrumman #generaldynamics #utc #ge #afrl #onr #afosr #ReactionEngines #spacex #virginorbit #usaf #darpa #mda #rollsroyce #nasa #tesla #safran #embraer #AirLaunchedRapidResponseWeapon #additivemanufacturing #military #physics #3dprinting #supersonic #ramjet #tbcc #collinsaerospace #rockwell #phantomworks #hypersonicmissile #alrrw #boeingphantomworks #generalatomics #cessna #dassault #arl #unitedlaunchalliance #spaceshipcompany #navair #diu #dia #usaf #unitedtechnologies #defenseadvancedresearchprojectagency #graphene #additivemanufacturing

-----------------------------

Unified Turbine Based Combined Cycle. Current technologies and what Lockheed is trying to force on the Dept of Defense, for that low speed Mach 5 plane DOD gave them $1 billion to build and would disintegrate above Mach 5, is TBCC. 2 separate propulsion systems in the same airframe, which requires TWICE the airframe space to use.

Unified Turbine Based Combined Cycle is 1 propulsion system cutting that airframe deficit in half, and also able to operate above Mach 10 up to Mach 15 in atmosphere, and a simple nozzle modification allows for outside atmosphere rocket mode, ie orbital capable.

Additionally, Reaction Engines maximum air breather mode is Mach 4.5, above that it will explode in flight from internal pressures are too high to operate. Thus, must switch to non air breather rocket mode to operate in atmosphere in hypersonic velocities. Which as a result, makes it not feasible for anything practical. It also takes an immense amount of fuel to function.

-------------

Advanced Additive Manufacturing for Hypersonic Aircraft

Utilizing new methods of fabrication and construction, make it possible to use additive manufacturing, dramatically reducing the time and costs of producing hypersonic platforms from missiles, aircraft, and space capable craft. Instead of aircraft being produced in piece, then bolted together; small platforms can be produced as a single unit and large platforms can be produces in large section and mated without bolting. These techniques include using exotic materials and advanced assembly processes, with an end result of streamlining the production costs and time for hypersonic aircraft; reducing months of assembly to weeks. Overall, this process greatly reduced the cost for producing hypersonic platforms. Even to such an extent that a Hellfire missile costs apx $100,000 but by utilizing our technologies, replacing it with a Mach 8-10 hypersonic missile of our physics/engineering and that missile would cost roughly $75,000 each delivered.

Materials used for these manufacturing processes are not disclosed, but overall, provides a foundation for extremely high stresses and thermodynamics, ideal for hypersonic platforms. This specific methodology and materials applications is many decades ahead of all known programs. Even to the extend of normalized space flight and re-entry, without concern of thermodynamic failure.

*Note, most entities that are experimenting with additive manufacturing for hypersonic aircraft, this makes it mainstream and standardized processes, which also applies for mass production.

What would normally be measured in years and perhaps a decade to go from drawing board to test flights, is reduced to singular months and ready for production within a year maximum.

Unified Turbine Based Combined Cycle (U-TBCC)

To date, the closest that NASA and industry have achieved for turbine based aircraft to fly at hypersonic velocities is by mounting a turbine into an aircraft and sharing the inlet with a scramjet or rocket based motor. Reaction Engines Sabre is not able to achieve hypersonic velocities and can only transition into a non air breathing rocket for beyond Mach 4.5

However, utilizing Unified Turbine Based Combine Cycle also known as U-TBCC, the two separate platforms are able to share a common inlet and the dual mode ramjet/scramjet is contained within the engine itself, which allows for a much smaller airframe footprint, thus engingeers are able to then design much higher performance aerial platforms for hypersonic flight, including the ability for constructing true single stage to orbit aircraft by utilizing a modification/version that allows for transition to outside atmosphere propulsion without any other propulsion platforms within the aircraft. By transitioning and developing aircraft to use Unified Turbine Based Combined Cycle, this propulsion system opens up new options to replace that airframe deficit for increased fuel capacity and/or payload.

Enhanced Dynamic Cavitation

Dramatically Increasing the efficiency of fuel air mixture for combustion processes at hypersonic velocities within scramjet propulsion platforms. The aspects of these processes are non disclosable.

Dynamic Scramjet Ignition Processes

For optimal scramjet ignition, a process known as Self Start is sought after, but in many cases if the platform becomes out of attitude, the scramjet will ignite. We have already solved this problem which as a result, a scramjet propulsion system can ignite at lower velocities, high velocities, at optimal attitude or not optimal attitude. It doesn't matter, it will ignite anyways at the proper point for maximum thrust capabilities at hypersonic velocities.

Hydrogen vs Kerosene Fuel Sources

Kerosene is an easy fuel to work with, and most western nations developing scramjet platforms use Kerosene for that fact. However, while kerosene has better thermal properties then Hydrogen, Hydrogen is a far superior fuel source in scramjet propulsion flight, do it having a much higher efficiency capability. Because of this aspect, in conjunction with our developments, it allows for a MUCH increased fuel to air mixture, combustion, thrust; and ability for higher speeds; instead of very low hypersonic velocities in the Mach 5-6 range. Instead, Mach 8-10 range, while we have begun developing hypersonic capabilities to exceed 15 in atmosphere within less then 5 years.

Conforming High Pressure Tank Technology for CNG and H2.

As most know in hypersonics, Hydrogen is a superior fuel source, but due to the storage abilities, can only be stored in cylinders thus much less fuel supply. Not anymore, we developed conforming high pressure storage technology for use in aerospace, automotive sectors, maritime, etc; which means any overall shape required for 8,000+ PSI CNG or Hydrogen. For hypersonic platforms, this means the ability to store a much larger volume of hydrogen vs cylinders.

As an example, X-43 flown by Nasa which flew at Mach 9.97. The fuel source was Hydrogen, which is extremely more volatile and combustible then kerosene (JP-7), via a cylinder in the main body. If it had used our technology, that entire section of the airframe would had been an 8,000 PSI H2 tank, which would had yielded 5-6 times the capacity. While the X-43 flew 11 seconds under power at Mach 9.97, at 6 times the fuel capacity would had yielded apx 66 seconds of fuel under power at Mach 9.97. If it had flew slower, around Mach 6, same principles applied would had yielded apx 500 seconds of fuel supply under power (slower speeds required less energy to maintain).

Enhanced Fuel Mixture During Shock Train Interaction

Normally, fuel injection is conducted at the correct insertion point within the shock train for maximum burn/combustion. Our methodologies differ, since almost half the fuel injection is conducted PRE shock train within the isolator, so at the point of isolator injection the fuel enhances the combustion process, which then requires less fuel injection to reach the same level of thrust capabilities.

Improved Bow Shock Interaction

Smoother interaction at hypersonic velocities and mitigating heat/stresses for beyond Mach 6 thermodynamics, which extraordinarily improves Type 3, 4, and 5 shock interaction.

6,000+ Fahrenheit Thermal Resistance

To date, the maximum thermal resistance was tested at AFRL in the spring of 2018, which resulted in a 3,200F thermal resistance for a short duration. This technology, allows for normalized hypersonic thermal resistance of 3,000-3,500F sustained, and up to 6,500F resistance for short endurance, ie 90 seconds or less. 10-20 minute resistance estimate approximately 4,500F +/- 200F.

*** This technology advancement also applies to Aerospike rocket engines, in which it is common for Aerospike's to exceed 4,500-5,000F temperatures, which results in the melting of the reversed bell housing. That melting no longer ocurrs, providing for stable combustion to ocurr for the entire flight envelope

Scramjet Propulsion Side Wall Cooling

With old technologies, side wall cooling is required for hypersonic flight and scramjet propulsion systems, otherwise the isolator and combustion regions of a scramjet would melt, even using advanced ablatives and ceramics, due to their inability to cope with very high temperatures. Using technology we have developed for very high thermodynamics and high stresses, side wall cooling is no longer required, thus removing that variable from the design process and focusing on improved ignition processes and increasing net thrust values.

Lower Threshold for Hypersonic Ignition

Active and adaptive flight dynamics, resulting in the ability for scramjet ignition at a much lower velocity, ie within ramjet envelope, between Mach 2-4, and seamless transition from supersonic to hypersonic flight, ie supersonic ramjet (scramjet). This active and dynamic aspect, has a wide variety of parameters for many flight dynamics, velocities, and altitudes; which means platforms no longer need to be engineered for specific altitude ranges or preset velocities, but those parameters can then be selected during launch configuration and are able to adapt actively in flight.

Dramatically Improved Maneuvering Capabilities at Hypersonic Velocities

Hypersonic vehicles, like their less technologically advanced brethren, use large actuator and the developers hope those controls surfaces do not disintegrate in flight. In reality, it is like rolling the dice, they may or may not survive, hence another reason why the attempt to keep velocities to Mach 6 or below. We have shrunken down control actuators while almost doubling torque and response capabilities specifically for hypersonic dynamics and extreme stresses involved, which makes it possible for maximum input authority for Mach 10 and beyond.

Paradigm Shift in Control Surface Methodologies, Increasing Control Authority (Internal Mechanical Applications)

To date, most control surfaces for hypersonic missile platforms still use fins, similar to lower speed conventional missiles, and some using ducted fins. This is mostly due to lack of comprehension of hypersonic velocities in their own favor. Instead, the body itself incorporates those control surfaces, greatly enhancing the airframe strength, opening up more space for hardware and fuel capacity; while simultaneously enhancing the platforms maneuvering capabilities.

A scramjet missile can then fly like conventional missile platforms, and not straight and level at high altitudes, losing velocity on it's decent trajectory to target. Another added benefit to this aspect, is the ability to extend range greatly, so if anyone elses hypersonic missile platform were developed for 400 mile range, falling out of the sky due to lack of glide capabilities; our platforms can easily reach 600+ miles, with minimal glide deceleration.

The Horrockses Cotton Fairies take you on a tour of the cotton manufacturing processes at three of their Preston Mills - Yard Works, Centenary / New Preston and Fishwick.

This was Horrockses - Crewdson's contribution to the 1920 trade publication Concerning Cotton - A brief account of the aims and achievements of the Amalgamated Cotton Mills Trust Limited and it's component companies.

TO ENLARGE - either:

1. Right-click the image then choose Original or...

2. Select View all sizes from the Actions tab then choose Original

www.pharmapackagingcn.com/products/infusion-rubber-stopper/

Infusion Stoppers are designed for infusion bottles and provide optimal protection and drug delivery. Our range of pharmaceutical rubber Infusion Stoppers is specifically designed to meet multi-piercing needs and facilitate manufacturing processes.

Details of Infusion Rubber Stopper

Product SpecificationDrawing NoCrown FeaturesCrown Diameter mmCrown Thickness mmPlug Diameter mmTotal Height mm

22-B21501Pit radiation22.33.814.27.8

28-C1512Pit single hole single circle273.81811.8

32-A111603Four hole three segment arc radiation30.9423.612.2

32-A31614Four hole three segment arc radiation30.8524.216

(En) Founded in 1906, the Coking Plant of Anderlues was specialized in the production of coke for industrial use.

Coke was obtained by distillation of coal in furnaces and, thanks to its superior fuel coal properties, it was used afterwards to feed the blast furnaces in the steel manufacturing process.

Closed and abandoned since 2002, the site has since undergone many losses and damages, not including an important pollution. While some buildings have now been demolished, there are however still some important parts of the former coking plant.

Among them, the former coal tower, next to the imposing "battery" of 38 furnaces, where the coke was produced. Besides them, we still can see the administrative buildings, the power station with its cooling tower, and buildings for the by-products, which were obtained by recovering the tar and coal gas. There are also a gasometer north side, the coal tip east side and a settling basin south side.

-----------

(Fr) Fondées en 1906, les Cokeries d'Anderlues étaient spécialisées dans la fabrication de coke à usage industriel.

Le coke était obtenu par distillation de la houille dans des fours et, grâce à ses propriétés combustibles supérieures au charbon, il servait par après à alimenter les hauts-fourneaux dans le processus de fabrication de l'acier.

Fermé et laissé à l'abandon depuis 2002, le site a depuis lors subi de nombreuses pertes et dégradations, sans compter la pollution qui y règne. Si certains bâtiments (comme l'ancien lavoir à charbon) ont aujourd'hui été démolis, on retrouve encore toutefois certaines parties importantes de cette ancienne cokerie.

Parmi celles-ci, l'ancienne tour à charbon suivie de près par l'imposante "batterie" de 38 fours, où était produit le coke. A côté d'eux, on découvre également les bâtiments administratifs, la centrale électrique avec sa tour de refroidissement, ainsi que les bâtiments des sous-produits, lesquels étaient obtenus par récupération du goudron et du gaz de houille. Et en périphérie, on retrouve un gazomètre côté nord, le terril à l'est et un bassin de décantation côté sud.

Hyperion, Hypersonic Mach 15 Scramjet Missile - IO Aircraft - ARRW, HAWC, Air Launched Rapid Response Weapon

Length: 120" / Span 25"

www.ioaircraft.com

Scramjet, Hypersonic, ARRW, HAWC, Air Launched Rapid Response Weapon, Scramjet Physics, Scramjet Engineering, Hypersonic Missile, hypersonic weapon, hypersonic fighter, hypersonic fighter plane, tgv, tactical glide vehicle, hypersonic commercial aircraft, hypersonic commercial plane, hypersonic aircraft, hypersonic plane, hypersonic airline, tbcc, glide breaker, fighter plane, hypersonic fighter, boeing phantom express, phantom works, boeing phantom works, lockheed skunk works, boost glide, tactical glide vehicle, space plane, scramjet, turbine based combined cycle, ramjet, dual mode ramjet, defense science, missile defense agency, aerospike, hydrogen aircraft, airlines, military, physics, airline, aerion supersonic, aerion, spike aerospace, boom supersonic, , darpa, onr, navair, afrl, air force research lab, office of naval research, defense advanced research project agency, afosr, socom, arl, army future command, mda, missile defense agenci, dia, defense intelligence agency, Air Force Office of Scientific Research,

Iteration V8, Hyperion Mach 15 #hypersonic #scramjet (50% faster then the X-43 #nasa), 300% faster than #Lockheed, #NorthropGrumman, #Raytheon, and Boeing. Much is sanitized as the technology advances are dramatic and not public.

DOD's funding of #AGM-183A / Air Launched Rapid Response Weapon, the poeple developing it barely comprehend student level capabilities and 50/50 it will disintegrate even at Mach 5. China and Russia, already much faster and higher tech making it obsolete already, India's recent test, apx 700 mph faster.

Summarized details are accurate

#hypersonic #hypersonics #scramjet #hypersonicplane #hypersonicaircraft #skunkworks #spaceplane #boeing #lockheed #raytheon #bae #bombardier #airbus #northopgrumman #generaldynamics #utc #ge #afrl #onr #afosr #ReactionEngines #spacex #virginorbit #usaf #darpa #mda #rollsroyce #nasa #tesla #safran #embraer #AirLaunchedRapidResponseWeapon #additivemanufacturing #military #physics #3dprinting #supersonic #ramjet #tbcc #collinsaerospace #rockwell #phantomworks #hypersonicmissile #alrrw #boeingphantomworks #generalatomics #cessna #dassault #arl #unitedlaunchalliance #spaceshipcompany #navair #diu #dia #usaf #unitedtechnologies #defenseadvancedresearchprojectagency #graphene #additivemanufacturing

-----------------------------

Unified Turbine Based Combined Cycle. Current technologies and what Lockheed is trying to force on the Dept of Defense, for that low speed Mach 5 plane DOD gave them $1 billion to build and would disintegrate above Mach 5, is TBCC. 2 separate propulsion systems in the same airframe, which requires TWICE the airframe space to use.

Unified Turbine Based Combined Cycle is 1 propulsion system cutting that airframe deficit in half, and also able to operate above Mach 10 up to Mach 15 in atmosphere, and a simple nozzle modification allows for outside atmosphere rocket mode, ie orbital capable.

Additionally, Reaction Engines maximum air breather mode is Mach 4.5, above that it will explode in flight from internal pressures are too high to operate. Thus, must switch to non air breather rocket mode to operate in atmosphere in hypersonic velocities. Which as a result, makes it not feasible for anything practical. It also takes an immense amount of fuel to function.

-------------

Advanced Additive Manufacturing for Hypersonic Aircraft

Utilizing new methods of fabrication and construction, make it possible to use additive manufacturing, dramatically reducing the time and costs of producing hypersonic platforms from missiles, aircraft, and space capable craft. Instead of aircraft being produced in piece, then bolted together; small platforms can be produced as a single unit and large platforms can be produces in large section and mated without bolting. These techniques include using exotic materials and advanced assembly processes, with an end result of streamlining the production costs and time for hypersonic aircraft; reducing months of assembly to weeks. Overall, this process greatly reduced the cost for producing hypersonic platforms. Even to such an extent that a Hellfire missile costs apx $100,000 but by utilizing our technologies, replacing it with a Mach 8-10 hypersonic missile of our physics/engineering and that missile would cost roughly $75,000 each delivered.

Materials used for these manufacturing processes are not disclosed, but overall, provides a foundation for extremely high stresses and thermodynamics, ideal for hypersonic platforms. This specific methodology and materials applications is many decades ahead of all known programs. Even to the extend of normalized space flight and re-entry, without concern of thermodynamic failure.

*Note, most entities that are experimenting with additive manufacturing for hypersonic aircraft, this makes it mainstream and standardized processes, which also applies for mass production.

What would normally be measured in years and perhaps a decade to go from drawing board to test flights, is reduced to singular months and ready for production within a year maximum.

Unified Turbine Based Combined Cycle (U-TBCC)

To date, the closest that NASA and industry have achieved for turbine based aircraft to fly at hypersonic velocities is by mounting a turbine into an aircraft and sharing the inlet with a scramjet or rocket based motor. Reaction Engines Sabre is not able to achieve hypersonic velocities and can only transition into a non air breathing rocket for beyond Mach 4.5

However, utilizing Unified Turbine Based Combine Cycle also known as U-TBCC, the two separate platforms are able to share a common inlet and the dual mode ramjet/scramjet is contained within the engine itself, which allows for a much smaller airframe footprint, thus engingeers are able to then design much higher performance aerial platforms for hypersonic flight, including the ability for constructing true single stage to orbit aircraft by utilizing a modification/version that allows for transition to outside atmosphere propulsion without any other propulsion platforms within the aircraft. By transitioning and developing aircraft to use Unified Turbine Based Combined Cycle, this propulsion system opens up new options to replace that airframe deficit for increased fuel capacity and/or payload.

Enhanced Dynamic Cavitation

Dramatically Increasing the efficiency of fuel air mixture for combustion processes at hypersonic velocities within scramjet propulsion platforms. The aspects of these processes are non disclosable.

Dynamic Scramjet Ignition Processes

For optimal scramjet ignition, a process known as Self Start is sought after, but in many cases if the platform becomes out of attitude, the scramjet will ignite. We have already solved this problem which as a result, a scramjet propulsion system can ignite at lower velocities, high velocities, at optimal attitude or not optimal attitude. It doesn't matter, it will ignite anyways at the proper point for maximum thrust capabilities at hypersonic velocities.

Hydrogen vs Kerosene Fuel Sources

Kerosene is an easy fuel to work with, and most western nations developing scramjet platforms use Kerosene for that fact. However, while kerosene has better thermal properties then Hydrogen, Hydrogen is a far superior fuel source in scramjet propulsion flight, do it having a much higher efficiency capability. Because of this aspect, in conjunction with our developments, it allows for a MUCH increased fuel to air mixture, combustion, thrust; and ability for higher speeds; instead of very low hypersonic velocities in the Mach 5-6 range. Instead, Mach 8-10 range, while we have begun developing hypersonic capabilities to exceed 15 in atmosphere within less then 5 years.

Conforming High Pressure Tank Technology for CNG and H2.

As most know in hypersonics, Hydrogen is a superior fuel source, but due to the storage abilities, can only be stored in cylinders thus much less fuel supply. Not anymore, we developed conforming high pressure storage technology for use in aerospace, automotive sectors, maritime, etc; which means any overall shape required for 8,000+ PSI CNG or Hydrogen. For hypersonic platforms, this means the ability to store a much larger volume of hydrogen vs cylinders.

As an example, X-43 flown by Nasa which flew at Mach 9.97. The fuel source was Hydrogen, which is extremely more volatile and combustible then kerosene (JP-7), via a cylinder in the main body. If it had used our technology, that entire section of the airframe would had been an 8,000 PSI H2 tank, which would had yielded 5-6 times the capacity. While the X-43 flew 11 seconds under power at Mach 9.97, at 6 times the fuel capacity would had yielded apx 66 seconds of fuel under power at Mach 9.97. If it had flew slower, around Mach 6, same principles applied would had yielded apx 500 seconds of fuel supply under power (slower speeds required less energy to maintain).

Enhanced Fuel Mixture During Shock Train Interaction

Normally, fuel injection is conducted at the correct insertion point within the shock train for maximum burn/combustion. Our methodologies differ, since almost half the fuel injection is conducted PRE shock train within the isolator, so at the point of isolator injection the fuel enhances the combustion process, which then requires less fuel injection to reach the same level of thrust capabilities.

Improved Bow Shock Interaction

Smoother interaction at hypersonic velocities and mitigating heat/stresses for beyond Mach 6 thermodynamics, which extraordinarily improves Type 3, 4, and 5 shock interaction.

6,000+ Fahrenheit Thermal Resistance

To date, the maximum thermal resistance was tested at AFRL in the spring of 2018, which resulted in a 3,200F thermal resistance for a short duration. This technology, allows for normalized hypersonic thermal resistance of 3,000-3,500F sustained, and up to 6,500F resistance for short endurance, ie 90 seconds or less. 10-20 minute resistance estimate approximately 4,500F +/- 200F.

*** This technology advancement also applies to Aerospike rocket engines, in which it is common for Aerospike's to exceed 4,500-5,000F temperatures, which results in the melting of the reversed bell housing. That melting no longer ocurrs, providing for stable combustion to ocurr for the entire flight envelope

Scramjet Propulsion Side Wall Cooling

With old technologies, side wall cooling is required for hypersonic flight and scramjet propulsion systems, otherwise the isolator and combustion regions of a scramjet would melt, even using advanced ablatives and ceramics, due to their inability to cope with very high temperatures. Using technology we have developed for very high thermodynamics and high stresses, side wall cooling is no longer required, thus removing that variable from the design process and focusing on improved ignition processes and increasing net thrust values.

Lower Threshold for Hypersonic Ignition

Active and adaptive flight dynamics, resulting in the ability for scramjet ignition at a much lower velocity, ie within ramjet envelope, between Mach 2-4, and seamless transition from supersonic to hypersonic flight, ie supersonic ramjet (scramjet). This active and dynamic aspect, has a wide variety of parameters for many flight dynamics, velocities, and altitudes; which means platforms no longer need to be engineered for specific altitude ranges or preset velocities, but those parameters can then be selected during launch configuration and are able to adapt actively in flight.

Dramatically Improved Maneuvering Capabilities at Hypersonic Velocities

Hypersonic vehicles, like their less technologically advanced brethren, use large actuator and the developers hope those controls surfaces do not disintegrate in flight. In reality, it is like rolling the dice, they may or may not survive, hence another reason why the attempt to keep velocities to Mach 6 or below. We have shrunken down control actuators while almost doubling torque and response capabilities specifically for hypersonic dynamics and extreme stresses involved, which makes it possible for maximum input authority for Mach 10 and beyond.

Paradigm Shift in Control Surface Methodologies, Increasing Control Authority (Internal Mechanical Applications)

To date, most control surfaces for hypersonic missile platforms still use fins, similar to lower speed conventional missiles, and some using ducted fins. This is mostly due to lack of comprehension of hypersonic velocities in their own favor. Instead, the body itself incorporates those control surfaces, greatly enhancing the airframe strength, opening up more space for hardware and fuel capacity; while simultaneously enhancing the platforms maneuvering capabilities.

A scramjet missile can then fly like conventional missile platforms, and not straight and level at high altitudes, losing velocity on it's decent trajectory to target. Another added benefit to this aspect, is the ability to extend range greatly, so if anyone elses hypersonic missile platform were developed for 400 mile range, falling out of the sky due to lack of glide capabilities; our platforms can easily reach 600+ miles, with minimal glide deceleration.

BlueEdge - Mach 8-10 Hypersonic Commercial Aircraft, 220 Passenger Hypersonic Commercial Plane - Imaginactive Media Release ICAO

Courtesy of Imaginactive, ICAO, Charles Bombardier, and Martin Rico. Media Release of High Quality Renderings for mainstream media.

IO Aircraft: www.ioaircraft.com/hypersonic/blueedge.php

Imaginactive: imaginactive.org/2019/02/blue-edge/

Martin Rico, Industrial Graphics Designed: www.linkedin.com/in/mjrico/

Seating: 220 | Crew 2+4

Length: 195ft | Span: 93ft

Engines: 4 U-TBCC (Unified Turbine Based Combined Cycle) +1 Aerospike for sustained 2G acceleration to Mach 10.

Fuel: H2 (Compressed Hydrogen)

Cruising Altitude: 100,000-125,000ft

Airframe: 75% Proprietary Composites

Operating Costs, Similar to a 737. $7,000-$15,000hr, including averaged maintenence costs

Iteration 3 (Full release of IT3, Monday January 14, 2019)

IO Aircraft www.ioaircraft.com

Drew Blair www.linkedin.com/in/drew-b-25485312/

-----------------------------

hypersonic plane, hypersonic aircraft, Imaginactive, ICAO, International Civil Aviation Orginization, Charles Bombardier, Martin Rico, hypersonic commercial plane, hypersonic commercial aircraft, hypersonic airline, tbcc, glide breaker, fighter plane, hyperonic fighter, boeing phantom express, phantom works, boeing phantom works, lockheed skunk works, hypersonic weapon, hypersonic missile, scramjet missile, scramjet engineering, scramjet physics, boost glide, tactical glide vehicle, Boeing XS-1, htv, Air Launched Rapid Response Weapon, (ARRW), hypersonic tactical vehicle, space plane, scramjet, turbine based combined cycle, ramjet, dual mode ramjet, darpa, onr, navair, afrl, air force research lab, office of naval research, defense advanced research project agency, defense science, missile defense agency, aerospike, hydrogen, hydrogen storage, hydrogen fueled, hydrogen aircraft, virgin airlines, united airlines, sas, finnair ,emirates airlines, ANA, JAL, airlines, military, physics, airline, british airways, air france

-----------------------------

Unified Turbine Based Combined Cycle. Current technologies and what Lockheed is trying to force on the Dept of Defense, for that low speed Mach 5 plane DOD gave them $1 billion to build and would disintegrate above Mach 5, is TBCC. 2 separate propulsion systems in the same airframe, which requires TWICE the airframe space to use.

Unified Turbine Based Combined Cycle is 1 propulsion system cutting that airframe deficit in half, and also able to operate above Mach 10 up to Mach 15 in atmosphere, and a simple nozzle modification allows for outside atmosphere rocket mode, ie orbital capable.

Additionally, Reaction Engines maximum air breather mode is Mach 4.5, above that it will explode in flight from internal pressures are too high to operate. Thus, must switch to non air breather rocket mode to operate in atmosphere in hypersonic velocities. Which as a result, makes it not feasible for anything practical. It also takes an immense amount of fuel to function.

-------------

Advanced Additive Manufacturing for Hypersonic Aircraft

Utilizing new methods of fabrication and construction, make it possible to use additive manufacturing, dramatically reducing the time and costs of producing hypersonic platforms from missiles, aircraft, and space capable craft. Instead of aircraft being produced in piece, then bolted together; small platforms can be produced as a single unit and large platforms can be produces in large section and mated without bolting. These techniques include using exotic materials and advanced assembly processes, with an end result of streamlining the production costs and time for hypersonic aircraft; reducing months of assembly to weeks. Overall, this process greatly reduced the cost for producing hypersonic platforms. Even to such an extent that a Hellfire missile costs apx $100,000 but by utilizing our technologies, replacing it with a Mach 8-10 hypersonic missile of our physics/engineering and that missile would cost roughly $75,000 each delivered.

Materials used for these manufacturing processes are not disclosed, but overall, provides a foundation for extremely high stresses and thermodynamics, ideal for hypersonic platforms. This specific methodology and materials applications is many decades ahead of all known programs. Even to the extend of normalized space flight and re-entry, without concern of thermodynamic failure.

*Note, most entities that are experimenting with additive manufacturing for hypersonic aircraft, this makes it mainstream and standardized processes, which also applies for mass production.

What would normally be measured in years and perhaps a decade to go from drawing board to test flights, is reduced to singular months and ready for production within a year maximum.

Unified Turbine Based Combined Cycle (U-TBCC)

To date, the closest that NASA and industry have achieved for turbine based aircraft to fly at hypersonic velocities is by mounting a turbine into an aircraft and sharing the inlet with a scramjet or rocket based motor. Reaction Engines Sabre is not able to achieve hypersonic velocities and can only transition into a non air breathing rocket for beyond Mach 4.5

However, utilizing Unified Turbine Based Combine Cycle also known as U-TBCC, the two separate platforms are able to share a common inlet and the dual mode ramjet/scramjet is contained within the engine itself, which allows for a much smaller airframe footprint, thus engingeers are able to then design much higher performance aerial platforms for hypersonic flight, including the ability for constructing true single stage to orbit aircraft by utilizing a modification/version that allows for transition to outside atmosphere propulsion without any other propulsion platforms within the aircraft. By transitioning and developing aircraft to use Unified Turbine Based Combined Cycle, this propulsion system opens up new options to replace that airframe deficit for increased fuel capacity and/or payload.

Enhanced Dynamic Cavitation

Dramatically Increasing the efficiency of fuel air mixture for combustion processes at hypersonic velocities within scramjet propulsion platforms. The aspects of these processes are non disclosable.

Dynamic Scramjet Ignition Processes

For optimal scramjet ignition, a process known as Self Start is sought after, but in many cases if the platform becomes out of attitude, the scramjet will ignite. We have already solved this problem which as a result, a scramjet propulsion system can ignite at lower velocities, high velocities, at optimal attitude or not optimal attitude. It doesn't matter, it will ignite anyways at the proper point for maximum thrust capabilities at hypersonic velocities.

Hydrogen vs Kerosene Fuel Sources

Kerosene is an easy fuel to work with, and most western nations developing scramjet platforms use Kerosene for that fact. However, while kerosene has better thermal properties then Hydrogen, Hydrogen is a far superior fuel source in scramjet propulsion flight, do it having a much higher efficiency capability. Because of this aspect, in conjunction with our developments, it allows for a MUCH increased fuel to air mixture, combustion, thrust; and ability for higher speeds; instead of very low hypersonic velocities in the Mach 5-6 range. Instead, Mach 8-10 range, while we have begun developing hypersonic capabilities to exceed 15 in atmosphere within less then 5 years.

Conforming High Pressure Tank Technology for CNG and H2.

As most know in hypersonics, Hydrogen is a superior fuel source, but due to the storage abilities, can only be stored in cylinders thus much less fuel supply. Not anymore, we developed conforming high pressure storage technology for use in aerospace, automotive sectors, maritime, etc; which means any overall shape required for 8,000+ PSI CNG or Hydrogen. For hypersonic platforms, this means the ability to store a much larger volume of hydrogen vs cylinders.

As an example, X-43 flown by Nasa which flew at Mach 9.97. The fuel source was Hydrogen, which is extremely more volatile and combustible then kerosene (JP-7), via a cylinder in the main body. If it had used our technology, that entire section of the airframe would had been an 8,000 PSI H2 tank, which would had yielded 5-6 times the capacity. While the X-43 flew 11 seconds under power at Mach 9.97, at 6 times the fuel capacity would had yielded apx 66 seconds of fuel under power at Mach 9.97. If it had flew slower, around Mach 6, same principles applied would had yielded apx 500 seconds of fuel supply under power (slower speeds required less energy to maintain).

Enhanced Fuel Mixture During Shock Train Interaction

Normally, fuel injection is conducted at the correct insertion point within the shock train for maximum burn/combustion. Our methodologies differ, since almost half the fuel injection is conducted PRE shock train within the isolator, so at the point of isolator injection the fuel enhances the combustion process, which then requires less fuel injection to reach the same level of thrust capabilities.

Improved Bow Shock Interaction

Smoother interaction at hypersonic velocities and mitigating heat/stresses for beyond Mach 6 thermodynamics, which extraordinarily improves Type 3, 4, and 5 shock interaction.

6,000+ Fahrenheit Thermal Resistance

To date, the maximum thermal resistance was tested at AFRL in the spring of 2018, which resulted in a 3,200F thermal resistance for a short duration. This technology, allows for normalized hypersonic thermal resistance of 3,000-3,500F sustained, and up to 6,500F resistance for short endurance, ie 90 seconds or less. 10-20 minute resistance estimate approximately 4,500F +/- 200F.

*** This technology advancement also applies to Aerospike rocket engines, in which it is common for Aerospike's to exceed 4,500-5,000F temperatures, which results in the melting of the reversed bell housing. That melting no longer ocurrs, providing for stable combustion to ocurr for the entire flight envelope

Scramjet Propulsion Side Wall Cooling

With old technologies, side wall cooling is required for hypersonic flight and scramjet propulsion systems, otherwise the isolator and combustion regions of a scramjet would melt, even using advanced ablatives and ceramics, due to their inability to cope with very high temperatures. Using technology we have developed for very high thermodynamics and high stresses, side wall cooling is no longer required, thus removing that variable from the design process and focusing on improved ignition processes and increasing net thrust values.

Lower Threshold for Hypersonic Ignition

Active and adaptive flight dynamics, resulting in the ability for scramjet ignition at a much lower velocity, ie within ramjet envelope, between Mach 2-4, and seamless transition from supersonic to hypersonic flight, ie supersonic ramjet (scramjet). This active and dynamic aspect, has a wide variety of parameters for many flight dynamics, velocities, and altitudes; which means platforms no longer need to be engineered for specific altitude ranges or preset velocities, but those parameters can then be selected during launch configuration and are able to adapt actively in flight.

Dramatically Improved Maneuvering Capabilities at Hypersonic Velocities

Hypersonic vehicles, like their less technologically advanced brethren, use large actuator and the developers hope those controls surfaces do not disintegrate in flight. In reality, it is like rolling the dice, they may or may not survive, hence another reason why the attempt to keep velocities to Mach 6 or below. We have shrunken down control actuators while almost doubling torque and response capabilities specifically for hypersonic dynamics and extreme stresses involved, which makes it possible for maximum input authority for Mach 10 and beyond.

Paradigm Shift in Control Surface Methodologies, Increasing Control Authority (Internal Mechanical Applications)

To date, most control surfaces for hypersonic missile platforms still use fins, similar to lower speed conventional missiles, and some using ducted fins. This is mostly due to lack of comprehension of hypersonic velocities in their own favor. Instead, the body itself incorporates those control surfaces, greatly enhancing the airframe strength, opening up more space for hardware and fuel capacity; while simultaneously enhancing the platforms maneuvering capabilities.

A scramjet missile can then fly like conventional missile platforms, and not straight and level at high altitudes, losing velocity on it's decent trajectory to target. Another added benefit to this aspect, is the ability to extend range greatly, so if anyone elses hypersonic missile platform were developed for 400 mile range, falling out of the sky due to lack of glide capabilities; our platforms can easily reach 600+ miles, with minimal glide deceleration.

This is the cover of a 36-page insert in the December 1964 Mexican edition of Reader’s Digest. The booklet was a formal announcement of Ford new manufacturing plant at Cuautitlan, just north of Mexico City. The booklet opens with a message from Mexican President Adolfo Lopez Mateos, and describes the manufacturing process and is full of ads from Ford suppliers.

The Chancellor Rishi Sunak visits Pall Corporation, a biotech business in Ilfracombe north Devon, where he met staff and toured the manufacturing process

Used Haix boots get sent to the factory for repairs

From Barfoot's series of coloured lithographs of 1840 depicting the cotton manufacturing process.

Original text written to accompany Lithograph No.2:

"When the COTTON is gathered, it generally happens that the seeds, and parts of the husk, cling very fast to it. It would take a very long time, and be very tedious, to pick it by the hand. Machines have, therefore, been made, which do this work very quickly. The Machine used for this purpose is called a Gin, and the operation is called Ginning the Cotton. After this, it is packed closely in bags, and presses are used to reduce it to as small compass as possible, that it may be removed with less trouble and expense. It is sometimes conveyed thousands of miles from the place where it grew; and, after being made into cloth, it is taken back, and work in the same land that produced it. The Cotton-Mill or Factory is a very large, well-lighted building, with a great quantity of Machinery in it, which is very clean, and kept in motion by a powerful Steam-Engine. The first thing done to the Cotton, when taken out of the bags, is to put it into the Willowing-Frame or Blowing Machine, the outside of which you see in this picture. The man on the right, first puts the Cotton on what is called the Feeder, which turns it inside the machine, where there is a large Drum, called a Cylinder, full of spikes or iron teeth, to tear and loosen the Cotton, and to cleanse it from dust and motes. The dust ascends through a large pipe, as seen in the drawing, and the motes fall through below. The clean Cotton is turned out at the other end of the frame by the Discharger, which is kept in slow motion for that purpose; but the motion of the Cylinder is very rapid indeed. Some of these Cylinders turn round two hundred times in a minute."

'The Progress of Cotton', J. R. Barfoot, Manchester, 1840

Photo showing the Project "Urban Green: Bamboo Bicycle" by Angelina Djukic, Lukas Gabesam, Japleen Khurana, Alina Schweighofer (Euregio) HTBLVA Ferlach at the JKU at the Ars Electronica Festival 2021.

In the project “Urban Green: Bamboo Bicycle”, an environmentally friendly manufacturing process of bamboo bicycles was developed. The four artists did not want to accept that the conventional construction of bamboo frames uses non-environmentally friendly fasteners and toxic paints. Therefore, they developed an innovative production process that uses only biodegradable materials such as lignin and bio-resin. The fasteners are designed using CAD programs such as Fusion 360 and produced via 3D printing. Environmentally friendly injection molding technology is used to connect the fasteners to the frame. In addition, the artists* have given the bamboo bicycle of the future an innovative design that can be adapted to individual wishes.

Urban Green: Bamboo Bicycle won the Young Professionals Award of Distinction in the u19-create your world category at the Prix Ars Electronica 2021.

Credit: tom mesic

In 1880 having been taught the use of simple lathes and machinery by his uncle,

and encouraged by William Morris, William Arthur Smith Benson began metalwork production

in Fulham, London. As his business grew Benson closely followed developments in technology, mastering all the processes of casting, turning, folding and riveting many variations of interchangeable components. He opened a showroom in Bond Street in 1887 displaying

light fittings, fireplace accessories, plant stands and hollow-ware, in silver, copper, brass,

iron and polished steel, patenting many of his popular designs to protect them from the

array of sub-standard copies that flooded the market.

WAS Benson was at the forefront of electric installation in homes all over Britain, advising on suitable lighting schemes and installation. In 1893 he electrified Philip Webb’s latest architectural commission, Standen, near East Grinstead, Sussex, now owned by the National Trust.

His metalwork and lighting designs reached iconic status, sold in galleries throughout Europe,

and in 1896 when William Morris died it was Benson with a colleague who bought Morris & Co and ran it alongside his own company until he resigned in 1917.

Benson attracted much acclaim for his metalwork designs and manufacturing processes.

The Studio Magazine of Decorative Arts, The Magazine of Art, and Herman Muthesius in

Das Englische Haus, were among the many who applauded his innovations.

www.artsandcraftsdesign.com/lighting/WASBensonLighting.html

Percival Spencer hoped to do for aviation what Henry Ford had done for automobiles: produce a cheap, rugged aircraft for civilian users. In March 1941, he flew his first product, the Spencer S-12 Air Car. He used an egg-shaped cabin, with a small pusher motor, and as simple a manufacturing process as possible, with as few parts as possible. By making the Air Car amphibious, it could land anywhere there was a body of water.

Development of the Air Car was put on hiatus when the United States entered World War II, and Spencer went to work for Republic Aviation. Republic became interested in the Air Car for after the war, when it was anticipated that the tens of thousands of pilots would want to continue flying. Republic purchased the rights from Spencer and developed it as the RC-3 Seabee, for its shape. It flew shortly before the end of the war, and drew a significant military contract as the OA-15. In the end, the OA-15 was cancelled with the end of World War II, but Republic began production in any case.

Though there was nothing wrong with the RC-3, the anticipated civilian market never materialized. Though many wartime pilots did want to keep flying, they would buy Cessnas and Pipers instead. Republic would produce a respectable number of Seabees--a little over a thousand--and due to their rugged construction, most remained flying for quite awhile. Sales were still disappointing, and the RC-3 turned out to be the last civilian aircraft Republic would produce, making their money instead on military contracts. Nonetheless, it remained a popular if niche aircraft, and over 200 are still flying today.

This Seabee was a surprise arrival at the Wings Over the Falls airshow in July 2022. Registered as N64PN, it was originally built in 1947, and began its career with Harrington Air Service of Ohio that year. Since then, it has been through a few owners, before being acquired in 2007 by a warbird collector in Nevada. The aircraft was rebuilt--including a newer engine and propeller--and was awarded Grand Champion at Oshkosh 2011 for its superb restoration.

Though N64PN wears modern US Navy training colors, the Navy never flew RC-3s; the Republic of (South) Vietnam Air Force did fly a few in the early years of the Vietnam War, which the small South Vietnamese flag on the rudder might refer to. Accurate or not, N64PN is indeed a beautiful aircraft--I can see why it has won awards.

Oban Distillery is one of the oldest distilleries in Scotland, dating back to around 1800. It underwent refurbishment in the 1890's and there has been little change to the present buildings since then.

Oban distillery takes it name from the town where the Highlands meet the Islands and nestles below the steep cliff that overlooks Oban.

Having booked ourselves for the one hour distillery tour (£ 7.50 each) I was extremely disappointed to be told long after we had paid and about to walk onto the distillery tour it was forbidden to take photographs (for Health & Safety reasons. All you flickr fiends better stop taking photos now if you want to live much longer). Since this was pretty well the only reason why I wanted to go in I debated demanding my money back but hesitated in doing so. I must admit I was going to take a photo of a machine that crushed the malted barley, and raised my camera to do so when the wizened tour guide behind me said, "That's the last photo you'll take" in a way that made me think she would take each of my limbs and put them across her knees and snap them in half before tearing my head from my torso with her bared teeth and throwing the remains over the cliff behind the distillery. There was no warehouse where the men of Oban tossed and turned the malted barley to let it germinate and infuse with the aroma of peat. They import the grain ready malted. There was no warehouse visible where we could see hundreds of wooden casks sitting silently in a cool warehouse for a minimum of 14 years. There was a sample of 53% proof 10 year old malt, but when you are given what seemed like around 2.5ml, not much more than a few teardrops, you felt they were a bit mean, although you did get a modest tot and a glass of their signature whisky afterwards before being led into the distillery shop where you could buy more. The tour was 'efficient' but for me lacked the very 'spirit' of whisky I had come to see, the malt being turned, the peat smoke, the rows of barrels sitting in the warehouse. Sadly, it didn't feel as special to me as it should have done. The Health & Safety lecture reminded me it had just become a modern manufacturing process.

»You & Me« from the Scrappies series - cast in 925 Sterling silver.

The body parts of the Scrappies are inspired by everything that can be found in a scrapyard: Old bolts and nuts, rusty coils, pipes, parts of ball bearings, tin cans, and more.

The figurines are cast in minute detail, including "rust holes" and traces of an alleged "welding". The scrap metal look gives the characters their own special, irresistible charm.

Each of the pendants is individually and uniquely created in a complex, novel manufacturing process:

It all begins with a digital 3D design which is then used to build a wax model. The wax model is created layer by layer on a special 3D wax printer. The wax model is used to produce a negative, heat-resistant shell around the wax.

Heat is applied to the outer shell such that the wax melts out and leaves room for liquid silver to be poured in. Finally, the shell has to be destroyed to take the finished object out.

More at www.indiegogo.com/you-n-me

Lancia Hyena:

Overview:

ManufacturerZagato on Lancia mechanicals

Also calledLancia Delta Zagato Hyena

Production1992–1996

24 made

AssemblyRho, Milan

DesignerMarco Pedracini at Zagato

Body and chassis

ClassSports car

Body style2-door coupé

LayoutTransverse front-engine, four-wheel drive

RelatedLancia Delta Integrale "Evoluzione"

Powertrain

Engine2.0 L I4 (turbocharged petrol)

Transmission5-speed manual

The Lancia Hyena was a 2-door coupé made in small numbers by Italian coachbuilder Zagato on the basis of the Delta HF Integrale "Evoluzione".

History:

The Hyena was born thanks to the initiative of Dutch classic car restorer and collector Paul V.J. Koot, who desired a coupé version of the multiple World Rally Champion HF Integrale. He turned to Zagato, where Hyena was designed in 1990 by Marco Pedracini. A first prototype was introduced at the Brussels Motor Show in January 1992.

Decision was taken to put the Hyena into limited production. Fiat refused to participate in the project supplying bare HF Integrale chassis, which complicated the manufacturing process: the Hyena had to be produced from fully finished HF Integrales, privately purchased at Lancia dealers. Koot's Lusso Service took care of procuring and stripping the donor cars in the Netherlands; they were then sent to Zagato in Milan to have the new body built and for final assembly. All of this made the Hyena very expensive to build and they were sold for around 140,000 Swiss francs or $75,000 (£49,430).

A production run of 75 examples was initially planned, but only 25 Hyenas were completed between 1992 and 1993.

Specifications:

The Zagato bodywork made use of aluminium alloys and composite materials; the interior featured new dashboard, console and door cards made entirely from carbon fibre. Thanks to these weight saving measures the Hyena was some 150 kilograms (330 lb) lighter than the original HF Integrale, about 15% of its overall weight. The two-litre turbo engine was upgraded from 205 to 250 PS (184 kW), and the car could accelerate from 0–100 km in 5.4 seconds.

[Text from Wikipedia]

en.wikipedia.org/wiki/Lancia_Delta#Lancia_Hyena

This miniland-scale Lego Lancia Hyena (1992 - Zagato) has been created for Flickr LUGNuts' 92nd Build Challenge, - "Stuck in the 90's", - all about vehicles from the decade of the 1990s.

* High Modulus Custom Carbon Racing Bicycle Frame

* Italian Bottom Bracket or BB30

* Tapered head tube/fork

* Best Road Bike Available in Formigli Collection

* 20% lighter 27% more rigid than Asiel

MSRP- $5999.99

The Asiel RF is our top of the line, flagship carbon racing frame. It is the result of 20 years of technological advancement, offering superior materials, manufacturing processes, and design. The Asiel RF is hand made with a tapered head tube/fork, BB30 bottom bracket (or Italian thread), and an integrated seat post. This makes for a no-compromises race frame that is unmatched in performance and is 20% lighter and 27% stiffer than the Asiel. A new paint scheme has also been developed to give this high caliber frame a unique and stunning look.

* FRAME Carbon with Carbon drop outs

* FORK Full Carbon Fork 1 1/2 to 1/ 1/8

* HEADSET Integrated *Dedda, Cane Creek or FSA headset included with frame purchase

* BOTTOM BRACKET Italian Thread OR BB30

* SEATPOST Integrated

Availble in one color scheme as shown.

The composite used to build the RF is an IM600 carbon fiber with a tensile strength equal to 48,000 lbs. Utilizing a special nanotechnology, Formigli optimizes the pre-impregnation of epoxy resin into the IM600 carbon fabric resulting in a final product that is 20% lighter and 27% more rigid and responsive than the Asiel.

Geometric Design

The Asiel RF was conceived with the vision to obtain a frame with maximum tensional stiffness. This was achieved through our research in tube design that optimizes the stresses of torque.

Looking at the rear of the frame, you can notice a significant drop in the seat-stays. This solution gave the frame more rigidity in the rear, thus obtaining a greater responsiveness in wheel traction. This drop can be felt especially in the hills and in sprints. It is most noticeable in low gears. Looking at the center of the frame, the bottom of the seat tube near the bottom bracket, the tube has a larger cross-section supporting the weight of the cyclist on a broader base. This gives the frame greater resistance and higher performance under stress.

We decided to build the Asiel RF with an internally integrated seat post with a slight rise of the seat post support and compensating the eventual rise with internal carbon plugs, shaped like the tube. The fork was designed with a tapered steering tube which provides a greater circumference to support the frame, improving the stability of the bike, as well as reducing the vibrations that are formed especially on high speed descents.

Fabric Composition

Layers: 6 layers + 3k cross weave (the upper, visible layer)

Laminate: Layered unidirectional and bidirectional oriented 12k

Resin: Epoxy

Fiber: Polyacrylonitrile (PAN)

Fabric: Preimpregnated fabric yarn (long fiber) molded with a vacuum sealing technique and chemically bonded 120°c.

Mechanical Properties

Tensile Strength: R. 220 Kgmmg

Modulus Elasticity: 38,000 Kgmmg

Fatigue: 100 million cycles/ 1400 MPa maxiumum load

Physical weight of carbon at 18°c is 1.86 kg/ dm3 (30% resin)

----------

Available at KGS Bikes kgsbikes.com with the added value of our BalancePoint™ positioning system to design your perfect custom bicycle.

In the heart of Old Town, historic factory is among the oldest in Grasse ... Indeed the current premises sheltered from their beginning in 1782, a perfume factory. In 1926, after the famous painter Jean Honoré Fragonard, it takes the name of Parfumerie Fragonard. Since then, every day, we produce are our perfumes, cosmetics and soaps in a respectful environment of tradition. We would be happy to welcome you and offer you a guided tour during which you will discover the different manufacturing processes and packaging our products. At the end of your visit, you can admire 3000 years of history of perfume through our private museum.

Dedicated to the perfume and aromatic plants, Flower Factory is surrounded by a beautiful garden scented plants ... the gates of Grasse, this contemporary factory opened in 1986 is equipped with very modern machinery for the manufacture and packaging of our products.

WORKSHOP ODOR "Perfumer's Apprentice"

Available on the French Riviera and Paris, in factories, workshops Perfumers Apprentice can discover the expertise of Perfumer: the history of perfume, raw materials and different extraction methods.

Experience unforgettable sense centered on the composition of a toilet water (100 ml) in aromatic notes of citrus and orange blossom, by assembling the different species made available. A fun and exciting experience in the world of perfumery, which proposes the course led by the teacher, the bottle and its bag, apron "apprentice" printed Fragonard, the diploma signed by the teacher and the summary of the composition .

One of our guides will accompany you as a result of the workshop for a visit "Prestige" from our factory.

Located in one of the oldest houses in the historic center of the city, this perfume offers original creations of Didier Gaglewski.

Didier Gaglewski, "nose" in Grasse, began offering its achievements in the framework Living in Provence and in Paris, Germany and Switzerland. Both "artisan", "artist", he decided to offer his achievements directly driven by the idea that the quality, originality and respect perfume composition will dress with fun, humor and quality its customers.

Requiring each of its perfumes, made ​​in the privacy of his laboratory, took several months of research. In partnership with Michelle Cavalier and the "garden of La Bastide," Didier Gaglewski also remains closer to the flowers and working the land. Try to trace extraction techniques inherited from the past and plants specific to the region perfumes seduce and make a very personal and authentic. This atypical creator is distinguished by its compositions made ​​in Grasse basin, its choice to favor natural raw materials and the search for sobriety.

Front satisfaction and customer demands wishing to regain the proposed perfumes, shop in Grasse, 12 rue of the Oratory, just steps from the International Perfume Museum to discover the scents and recent creations.

The country house of Aromas

Based in Saint Cézaire on Siagne in the Pays de Grasse, the Bastide aromas manufactures and packages fragrances since 1995.

Saint Cézaire on Siagne is a typical Provencal village a few kilometers from Grasse, the world capital of perfumery.

The homemade studio human scale can meet all your demands. The 100% handmade is carried out in the workshop without intermediary, under the control of a chemist.

La Bastide des Aromas, respects the traditions of the Grasse region and offers the exclusive fragrances custom made in the workshop on-site, high quality, with particular stress on the fragrance concentration, her outfit and originality.

Raven - Model B Mach 8-10 - Supersonic / Hypersonic Business Jet - Iteration 6

Seating: 22 | Crew 2+1

Length: 100ft | Span: 45ft 8in

Engines: 2 U-TBCC (Unified Turbine Based Combined Cycle)

Fuel: H2 (Compressed Hydrogen)

Cruising Altitude: 100,000-125,000 ft @ Mach 8-10

Air frame: 75% Proprietary Composites

Operating Costs, Similar to the hourly operating costs of a Gulfstream G650 or Bombardier Global Express 7000 Series

IO Aircraft www.ioaircraft.com

Drew Blair www.linkedin.com/in/drew-b-25485312/

-----------------------------

supersonic business jet, hypersonic business jet, hypersonic plane, hypersonic aircraft, hypersonic commercial plane, hypersonic commercial aircraft, hypersonic airline, Aerion, Aerion Supersonic, tbcc, glide breaker, fighter plane, hyperonic fighter, boeing phantom express, phantom works, boeing phantom works, lockheed skunk works, hypersonic weapon, hypersonic missile, scramjet missile, scramjet engineering, scramjet physics, boost glide, tactical glide vehicle, Boeing XS-1, htv, Air Launched Rapid Response Weapon, (ARRW), hypersonic tactical vehicle, space plane, scramjet, turbine based combined cycle, ramjet, dual mode ramjet, darpa, onr, navair, afrl, air force research lab, office of naval research, defense advanced research project agency, defense science, missile defense agency, aerospike, hydrogen, hydrogen storage, hydrogen fueled, hydrogen aircraft, virgin airlines, united airlines, sas, finnair ,emirates airlines, ANA, JAL, airlines, military, physics, airline, british airways, air france

-----------------------------

Unified Turbine Based Combined Cycle. Current technologies and what Lockheed is trying to force on the Dept of Defense, for that low speed Mach 5 plane DOD gave them $1 billion to build and would disintegrate above Mach 5, is TBCC. 2 separate propulsion systems in the same airframe, which requires TWICE the airframe space to use.

Unified Turbine Based Combined Cycle is 1 propulsion system cutting that airframe deficit in half, and also able to operate above Mach 10 up to Mach 15 in atmosphere, and a simple nozzle modification allows for outside atmosphere rocket mode, ie orbital capable.

Additionally, Reaction Engines maximum air breather mode is Mach 4.5, above that it will explode in flight from internal pressures are too high to operate. Thus, must switch to non air breather rocket mode to operate in atmosphere in hypersonic velocities. Which as a result, makes it not feasible for anything practical. It also takes an immense amount of fuel to function.

-------------

Advanced Additive Manufacturing for Hypersonic Aircraft

Utilizing new methods of fabrication and construction, make it possible to use additive manufacturing, dramatically reducing the time and costs of producing hypersonic platforms from missiles, aircraft, and space capable craft. Instead of aircraft being produced in piece, then bolted together; small platforms can be produced as a single unit and large platforms can be produces in large section and mated without bolting. These techniques include using exotic materials and advanced assembly processes, with an end result of streamlining the production costs and time for hypersonic aircraft; reducing months of assembly to weeks. Overall, this process greatly reduced the cost for producing hypersonic platforms. Even to such an extent that a Hellfire missile costs apx $100,000 but by utilizing our technologies, replacing it with a Mach 8-10 hypersonic missile of our physics/engineering and that missile would cost roughly $75,000 each delivered.

Materials used for these manufacturing processes are not disclosed, but overall, provides a foundation for extremely high stresses and thermodynamics, ideal for hypersonic platforms. This specific methodology and materials applications is many decades ahead of all known programs. Even to the extend of normalized space flight and re-entry, without concern of thermodynamic failure.

*Note, most entities that are experimenting with additive manufacturing for hypersonic aircraft, this makes it mainstream and standardized processes, which also applies for mass production.

What would normally be measured in years and perhaps a decade to go from drawing board to test flights, is reduced to singular months and ready for production within a year maximum.

Unified Turbine Based Combined Cycle (U-TBCC)

To date, the closest that NASA and industry have achieved for turbine based aircraft to fly at hypersonic velocities is by mounting a turbine into an aircraft and sharing the inlet with a scramjet or rocket based motor. Reaction Engines Sabre is not able to achieve hypersonic velocities and can only transition into a non air breathing rocket for beyond Mach 4.5

However, utilizing Unified Turbine Based Combine Cycle also known as U-TBCC, the two separate platforms are able to share a common inlet and the dual mode ramjet/scramjet is contained within the engine itself, which allows for a much smaller airframe footprint, thus engingeers are able to then design much higher performance aerial platforms for hypersonic flight, including the ability for constructing true single stage to orbit aircraft by utilizing a modification/version that allows for transition to outside atmosphere propulsion without any other propulsion platforms within the aircraft. By transitioning and developing aircraft to use Unified Turbine Based Combined Cycle, this propulsion system opens up new options to replace that airframe deficit for increased fuel capacity and/or payload.

Enhanced Dynamic Cavitation

Dramatically Increasing the efficiency of fuel air mixture for combustion processes at hypersonic velocities within scramjet propulsion platforms. The aspects of these processes are non disclosable.

Dynamic Scramjet Ignition Processes

For optimal scramjet ignition, a process known as Self Start is sought after, but in many cases if the platform becomes out of attitude, the scramjet will ignite. We have already solved this problem which as a result, a scramjet propulsion system can ignite at lower velocities, high velocities, at optimal attitude or not optimal attitude. It doesn't matter, it will ignite anyways at the proper point for maximum thrust capabilities at hypersonic velocities.

Hydrogen vs Kerosene Fuel Sources

Kerosene is an easy fuel to work with, and most western nations developing scramjet platforms use Kerosene for that fact. However, while kerosene has better thermal properties then Hydrogen, Hydrogen is a far superior fuel source in scramjet propulsion flight, do it having a much higher efficiency capability. Because of this aspect, in conjunction with our developments, it allows for a MUCH increased fuel to air mixture, combustion, thrust; and ability for higher speeds; instead of very low hypersonic velocities in the Mach 5-6 range. Instead, Mach 8-10 range, while we have begun developing hypersonic capabilities to exceed 15 in atmosphere within less then 5 years.

Conforming High Pressure Tank Technology for CNG and H2.

As most know in hypersonics, Hydrogen is a superior fuel source, but due to the storage abilities, can only be stored in cylinders thus much less fuel supply. Not anymore, we developed conforming high pressure storage technology for use in aerospace, automotive sectors, maritime, etc; which means any overall shape required for 8,000+ PSI CNG or Hydrogen. For hypersonic platforms, this means the ability to store a much larger volume of hydrogen vs cylinders.

As an example, X-43 flown by Nasa which flew at Mach 9.97. The fuel source was Hydrogen, which is extremely more volatile and combustible then kerosene (JP-7), via a cylinder in the main body. If it had used our technology, that entire section of the airframe would had been an 8,000 PSI H2 tank, which would had yielded 5-6 times the capacity. While the X-43 flew 11 seconds under power at Mach 9.97, at 6 times the fuel capacity would had yielded apx 66 seconds of fuel under power at Mach 9.97. If it had flew slower, around Mach 6, same principles applied would had yielded apx 500 seconds of fuel supply under power (slower speeds required less energy to maintain).

Enhanced Fuel Mixture During Shock Train Interaction

Normally, fuel injection is conducted at the correct insertion point within the shock train for maximum burn/combustion. Our methodologies differ, since almost half the fuel injection is conducted PRE shock train within the isolator, so at the point of isolator injection the fuel enhances the combustion process, which then requires less fuel injection to reach the same level of thrust capabilities.

Improved Bow Shock Interaction

Smoother interaction at hypersonic velocities and mitigating heat/stresses for beyond Mach 6 thermodynamics, which extraordinarily improves Type 3, 4, and 5 shock interaction.

6,000+ Fahrenheit Thermal Resistance

To date, the maximum thermal resistance was tested at AFRL in the spring of 2018, which resulted in a 3,200F thermal resistance for a short duration. This technology, allows for normalized hypersonic thermal resistance of 3,000-3,500F sustained, and up to 6,500F resistance for short endurance, ie 90 seconds or less. 10-20 minute resistance estimate approximately 4,500F +/- 200F.

*** This technology advancement also applies to Aerospike rocket engines, in which it is common for Aerospike's to exceed 4,500-5,000F temperatures, which results in the melting of the reversed bell housing. That melting no longer ocurrs, providing for stable combustion to ocurr for the entire flight envelope

Scramjet Propulsion Side Wall Cooling

With old technologies, side wall cooling is required for hypersonic flight and scramjet propulsion systems, otherwise the isolator and combustion regions of a scramjet would melt, even using advanced ablatives and ceramics, due to their inability to cope with very high temperatures. Using technology we have developed for very high thermodynamics and high stresses, side wall cooling is no longer required, thus removing that variable from the design process and focusing on improved ignition processes and increasing net thrust values.

Lower Threshold for Hypersonic Ignition

Active and adaptive flight dynamics, resulting in the ability for scramjet ignition at a much lower velocity, ie within ramjet envelope, between Mach 2-4, and seamless transition from supersonic to hypersonic flight, ie supersonic ramjet (scramjet). This active and dynamic aspect, has a wide variety of parameters for many flight dynamics, velocities, and altitudes; which means platforms no longer need to be engineered for specific altitude ranges or preset velocities, but those parameters can then be selected during launch configuration and are able to adapt actively in flight.

Dramatically Improved Maneuvering Capabilities at Hypersonic Velocities

Hypersonic vehicles, like their less technologically advanced brethren, use large actuator and the developers hope those controls surfaces do not disintegrate in flight. In reality, it is like rolling the dice, they may or may not survive, hence another reason why the attempt to keep velocities to Mach 6 or below. We have shrunken down control actuators while almost doubling torque and response capabilities specifically for hypersonic dynamics and extreme stresses involved, which makes it possible for maximum input authority for Mach 10 and beyond.

Paradigm Shift in Control Surface Methodologies, Increasing Control Authority (Internal Mechanical Applications)

To date, most control surfaces for hypersonic missile platforms still use fins, similar to lower speed conventional missiles, and some using ducted fins. This is mostly due to lack of comprehension of hypersonic velocities in their own favor. Instead, the body itself incorporates those control surfaces, greatly enhancing the airframe strength, opening up more space for hardware and fuel capacity; while simultaneously enhancing the platforms maneuvering capabilities.

A scramjet missile can then fly like conventional missile platforms, and not straight and level at high altitudes, losing velocity on it's decent trajectory to target. Another added benefit to this aspect, is the ability to extend range greatly, so if anyone elses hypersonic missile platform were developed for 400 mile range, falling out of the sky due to lack of glide capabilities; our platforms can easily reach 600+ miles, with minimal glide deceleration.

Enterprise Minister Arlene Foster has announced a £2.2million expansion by Greiner Packaging Ltd. at Dungannon that plans to create 10 new jobs.

The Minister announced the investment in state-of-the-art In-Mould Labelling (IML) technology during a visit to the Austrian owned company.

Arlene Foster said: “This investment of £2.2 million is a testament to the vision of the company in continually introducing new technology and manufacturing processes that is enabling it to meet market demand for his packaging expertise especially from major customers in food processing.

“Invest Northern Ireland has offered over £200,000 towards the project which will also create 10 new jobs for Dungannon in addition to the 210 already employed by this progressive international company. The scale of the investment by the Greiner Group is evidence of the quality and calibre of the Northern Ireland operation and speaks volumes on its ability to deliver in challenging economic times.

“The company is also an important player within the local food industry especially the dairy sector and is positioned to make an even greater contribution as the industry continues to grow from the expansion projected by companies in the recently published agri-food strategy ‘Going for Growth – Investing in Success’.”

Jarek Zasadzinski, CEO Greiner Packaging UK, said: “This is a significant strategic investment for the company and indeed the group. The IML equipment has already enabled us to expand our packaging portfolio and to secure significant new business from international customers.

“In 2012 Greiner Packaging Ltd saw a growth of over 17% and was the fastest growing site from Greiner Packaging International. Thanks to this new technology the growth in 2013 will be even on a larger scale.

“While we have a strong customer base particularly in rigid packaging for the dairy industry, the new moulding hall is enabling us to develop expertise and products for a much wider marketplace including high profile clients especially in the global confectionery industry. We are very strong player in this market in Europe and we are intending to grow also in the UK and Ireland.

“This strengthens the position of the operation here in Dungannon substantially and provides scope for further and faster growth in both short and long terms.”

Pictured at Greiner Packaging Ltd are (l to r) Lord Morrow; Darryl McShane, Operations Manager, Greiner Packaging Ltd; Enterprise Minister Arlene Foster and Jarek Zasadzinski, CEO, Greiner Packaging UK

photo credit Brian Morrison

The Horrockses Cotton Fairies take you on a tour of the cotton manufacturing processes at three of their Preston Mills - Yard Works, Centenary / New Preston and Fishwick.

This was Horrockses - Crewdson's contribution to the 1920 trade publication Concerning Cotton - A brief account of the aims and achievements of the Amalgamated Cotton Mills Trust Limited and it's component companies.

TO ENLARGE - either:

1. Right-click the image then choose Original or...

2. Select View all sizes from the Actions tab then choose Original

At the Cup Noodles Museum, you can learn the secret of cup noodle and even have the opportunity to make one-of-a-kind ramen yourself.

Japanese food company Nissin operates this unique museum for Ramen.

The museum shows the 40 year product history as well as the founder, Mr. Ando Momofuku's creativity, by exhibiting 3,000 kinds of cup noodle packages.

They also recreate Mr. Ando Momofuku's humble research facility.

At "My Cup Noodle Factory," you can make your own cup noodle out of 5,460 soup base / topping combinations.

There is also "Cup Noodles Park", a playground for kids where they can experience the manufacturing process of Cup Noodle.

There is a "Chicken Ramen Factory" where you can make Chicken Ramen by hand, starting with kneading, spreading, and steaming the wheat flour and then drying it with the hot oil drying method. After experiencing the process that led to the invention of the world's first instant ramen, you can take your freshly made ramen with you and enjoy its delicious taste at home.

And of course you can enjoy global varieties of noodles in the contemporarily designed museum restaurant!

Lancia Hyena:

Overview:

ManufacturerZagato on Lancia mechanicals

Also calledLancia Delta Zagato Hyena

Production1992–1996

24 made

AssemblyRho, Milan

DesignerMarco Pedracini at Zagato

Body and chassis

ClassSports car

Body style2-door coupé

LayoutTransverse front-engine, four-wheel drive

RelatedLancia Delta Integrale "Evoluzione"

Powertrain

Engine2.0 L I4 (turbocharged petrol)

Transmission5-speed manual

The Lancia Hyena was a 2-door coupé made in small numbers by Italian coachbuilder Zagato on the basis of the Delta HF Integrale "Evoluzione".

History:

The Hyena was born thanks to the initiative of Dutch classic car restorer and collector Paul V.J. Koot, who desired a coupé version of the multiple World Rally Champion HF Integrale. He turned to Zagato, where Hyena was designed in 1990 by Marco Pedracini. A first prototype was introduced at the Brussels Motor Show in January 1992.

Decision was taken to put the Hyena into limited production. Fiat refused to participate in the project supplying bare HF Integrale chassis, which complicated the manufacturing process: the Hyena had to be produced from fully finished HF Integrales, privately purchased at Lancia dealers. Koot's Lusso Service took care of procuring and stripping the donor cars in the Netherlands; they were then sent to Zagato in Milan to have the new body built and for final assembly. All of this made the Hyena very expensive to build and they were sold for around 140,000 Swiss francs or $75,000 (£49,430).

A production run of 75 examples was initially planned, but only 25 Hyenas were completed between 1992 and 1993.

Specifications:

The Zagato bodywork made use of aluminium alloys and composite materials; the interior featured new dashboard, console and door cards made entirely from carbon fibre. Thanks to these weight saving measures the Hyena was some 150 kilograms (330 lb) lighter than the original HF Integrale, about 15% of its overall weight. The two-litre turbo engine was upgraded from 205 to 250 PS (184 kW), and the car could accelerate from 0–100 km in 5.4 seconds.

[Text from Wikipedia]

en.wikipedia.org/wiki/Lancia_Delta#Lancia_Hyena

This miniland-scale Lego Lancia Hyena (1992 - Zagato) has been created for Flickr LUGNuts' 92nd Build Challenge, - "Stuck in the 90's", - all about vehicles from the decade of the 1990s.

Raven Model B Mach 8-10 - Supersonic / Hypersonic Business Jet - Iteration 6

Seating: 22 | Crew 2+1

Length: 100ft | Span: 45ft 8in

Engines: 2 U-TBCC (Unified Turbine Based Combined Cycle)

Fuel: H2 (Compressed Hydrogen)

Cruising Altitude: 100,000-125,000 ft @ Mach 8-10

Air frame: 75% Proprietary Composites

Operating Costs, Similar to the hourly operating costs of a Gulfstream G650 or Bombardier Global Express 7000 Series

IO Aircraft www.ioaircraft.com

Drew Blair www.linkedin.com/in/drew-b-25485312/

-----------------------------

supersonic business jet, hypersonic business jet, hypersonic plane, hypersonic aircraft, hypersonic commercial plane, hypersonic commercial aircraft, hypersonic airline, Aerion, Aerion Supersonic, tbcc, glide breaker, fighter plane, hyperonic fighter, boeing phantom express, phantom works, boeing phantom works, lockheed skunk works, hypersonic weapon, hypersonic missile, scramjet missile, scramjet engineering, scramjet physics, boost glide, tactical glide vehicle, Boeing XS-1, htv, Air Launched Rapid Response Weapon, (ARRW), hypersonic tactical vehicle, space plane, scramjet, turbine based combined cycle, ramjet, dual mode ramjet, darpa, onr, navair, afrl, air force research lab, office of naval research, defense advanced research project agency, defense science, missile defense agency, aerospike, hydrogen, hydrogen storage, hydrogen fueled, hydrogen aircraft, virgin airlines, united airlines, sas, finnair ,emirates airlines, ANA, JAL, airlines, military, physics, airline, british airways, air france

-----------------------------

Unified Turbine Based Combined Cycle. Current technologies and what Lockheed is trying to force on the Dept of Defense, for that low speed Mach 5 plane DOD gave them $1 billion to build and would disintegrate above Mach 5, is TBCC. 2 separate propulsion systems in the same airframe, which requires TWICE the airframe space to use.

Unified Turbine Based Combined Cycle is 1 propulsion system cutting that airframe deficit in half, and also able to operate above Mach 10 up to Mach 15 in atmosphere, and a simple nozzle modification allows for outside atmosphere rocket mode, ie orbital capable.

Additionally, Reaction Engines maximum air breather mode is Mach 4.5, above that it will explode in flight from internal pressures are too high to operate. Thus, must switch to non air breather rocket mode to operate in atmosphere in hypersonic velocities. Which as a result, makes it not feasible for anything practical. It also takes an immense amount of fuel to function.

-------------

Advanced Additive Manufacturing for Hypersonic Aircraft

Utilizing new methods of fabrication and construction, make it possible to use additive manufacturing, dramatically reducing the time and costs of producing hypersonic platforms from missiles, aircraft, and space capable craft. Instead of aircraft being produced in piece, then bolted together; small platforms can be produced as a single unit and large platforms can be produces in large section and mated without bolting. These techniques include using exotic materials and advanced assembly processes, with an end result of streamlining the production costs and time for hypersonic aircraft; reducing months of assembly to weeks. Overall, this process greatly reduced the cost for producing hypersonic platforms. Even to such an extent that a Hellfire missile costs apx $100,000 but by utilizing our technologies, replacing it with a Mach 8-10 hypersonic missile of our physics/engineering and that missile would cost roughly $75,000 each delivered.

Materials used for these manufacturing processes are not disclosed, but overall, provides a foundation for extremely high stresses and thermodynamics, ideal for hypersonic platforms. This specific methodology and materials applications is many decades ahead of all known programs. Even to the extend of normalized space flight and re-entry, without concern of thermodynamic failure.

*Note, most entities that are experimenting with additive manufacturing for hypersonic aircraft, this makes it mainstream and standardized processes, which also applies for mass production.

What would normally be measured in years and perhaps a decade to go from drawing board to test flights, is reduced to singular months and ready for production within a year maximum.

Unified Turbine Based Combined Cycle (U-TBCC)

To date, the closest that NASA and industry have achieved for turbine based aircraft to fly at hypersonic velocities is by mounting a turbine into an aircraft and sharing the inlet with a scramjet or rocket based motor. Reaction Engines Sabre is not able to achieve hypersonic velocities and can only transition into a non air breathing rocket for beyond Mach 4.5

However, utilizing Unified Turbine Based Combine Cycle also known as U-TBCC, the two separate platforms are able to share a common inlet and the dual mode ramjet/scramjet is contained within the engine itself, which allows for a much smaller airframe footprint, thus engingeers are able to then design much higher performance aerial platforms for hypersonic flight, including the ability for constructing true single stage to orbit aircraft by utilizing a modification/version that allows for transition to outside atmosphere propulsion without any other propulsion platforms within the aircraft. By transitioning and developing aircraft to use Unified Turbine Based Combined Cycle, this propulsion system opens up new options to replace that airframe deficit for increased fuel capacity and/or payload.

Enhanced Dynamic Cavitation

Dramatically Increasing the efficiency of fuel air mixture for combustion processes at hypersonic velocities within scramjet propulsion platforms. The aspects of these processes are non disclosable.

Dynamic Scramjet Ignition Processes

For optimal scramjet ignition, a process known as Self Start is sought after, but in many cases if the platform becomes out of attitude, the scramjet will ignite. We have already solved this problem which as a result, a scramjet propulsion system can ignite at lower velocities, high velocities, at optimal attitude or not optimal attitude. It doesn't matter, it will ignite anyways at the proper point for maximum thrust capabilities at hypersonic velocities.

Hydrogen vs Kerosene Fuel Sources

Kerosene is an easy fuel to work with, and most western nations developing scramjet platforms use Kerosene for that fact. However, while kerosene has better thermal properties then Hydrogen, Hydrogen is a far superior fuel source in scramjet propulsion flight, do it having a much higher efficiency capability. Because of this aspect, in conjunction with our developments, it allows for a MUCH increased fuel to air mixture, combustion, thrust; and ability for higher speeds; instead of very low hypersonic velocities in the Mach 5-6 range. Instead, Mach 8-10 range, while we have begun developing hypersonic capabilities to exceed 15 in atmosphere within less then 5 years.

Conforming High Pressure Tank Technology for CNG and H2.

As most know in hypersonics, Hydrogen is a superior fuel source, but due to the storage abilities, can only be stored in cylinders thus much less fuel supply. Not anymore, we developed conforming high pressure storage technology for use in aerospace, automotive sectors, maritime, etc; which means any overall shape required for 8,000+ PSI CNG or Hydrogen. For hypersonic platforms, this means the ability to store a much larger volume of hydrogen vs cylinders.

As an example, X-43 flown by Nasa which flew at Mach 9.97. The fuel source was Hydrogen, which is extremely more volatile and combustible then kerosene (JP-7), via a cylinder in the main body. If it had used our technology, that entire section of the airframe would had been an 8,000 PSI H2 tank, which would had yielded 5-6 times the capacity. While the X-43 flew 11 seconds under power at Mach 9.97, at 6 times the fuel capacity would had yielded apx 66 seconds of fuel under power at Mach 9.97. If it had flew slower, around Mach 6, same principles applied would had yielded apx 500 seconds of fuel supply under power (slower speeds required less energy to maintain).

Enhanced Fuel Mixture During Shock Train Interaction

Normally, fuel injection is conducted at the correct insertion point within the shock train for maximum burn/combustion. Our methodologies differ, since almost half the fuel injection is conducted PRE shock train within the isolator, so at the point of isolator injection the fuel enhances the combustion process, which then requires less fuel injection to reach the same level of thrust capabilities.

Improved Bow Shock Interaction

Smoother interaction at hypersonic velocities and mitigating heat/stresses for beyond Mach 6 thermodynamics, which extraordinarily improves Type 3, 4, and 5 shock interaction.

6,000+ Fahrenheit Thermal Resistance

To date, the maximum thermal resistance was tested at AFRL in the spring of 2018, which resulted in a 3,200F thermal resistance for a short duration. This technology, allows for normalized hypersonic thermal resistance of 3,000-3,500F sustained, and up to 6,500F resistance for short endurance, ie 90 seconds or less. 10-20 minute resistance estimate approximately 4,500F +/- 200F.

*** This technology advancement also applies to Aerospike rocket engines, in which it is common for Aerospike's to exceed 4,500-5,000F temperatures, which results in the melting of the reversed bell housing. That melting no longer ocurrs, providing for stable combustion to ocurr for the entire flight envelope

Scramjet Propulsion Side Wall Cooling

With old technologies, side wall cooling is required for hypersonic flight and scramjet propulsion systems, otherwise the isolator and combustion regions of a scramjet would melt, even using advanced ablatives and ceramics, due to their inability to cope with very high temperatures. Using technology we have developed for very high thermodynamics and high stresses, side wall cooling is no longer required, thus removing that variable from the design process and focusing on improved ignition processes and increasing net thrust values.

Lower Threshold for Hypersonic Ignition

Active and adaptive flight dynamics, resulting in the ability for scramjet ignition at a much lower velocity, ie within ramjet envelope, between Mach 2-4, and seamless transition from supersonic to hypersonic flight, ie supersonic ramjet (scramjet). This active and dynamic aspect, has a wide variety of parameters for many flight dynamics, velocities, and altitudes; which means platforms no longer need to be engineered for specific altitude ranges or preset velocities, but those parameters can then be selected during launch configuration and are able to adapt actively in flight.

Dramatically Improved Maneuvering Capabilities at Hypersonic Velocities

Hypersonic vehicles, like their less technologically advanced brethren, use large actuator and the developers hope those controls surfaces do not disintegrate in flight. In reality, it is like rolling the dice, they may or may not survive, hence another reason why the attempt to keep velocities to Mach 6 or below. We have shrunken down control actuators while almost doubling torque and response capabilities specifically for hypersonic dynamics and extreme stresses involved, which makes it possible for maximum input authority for Mach 10 and beyond.

Paradigm Shift in Control Surface Methodologies, Increasing Control Authority (Internal Mechanical Applications)

To date, most control surfaces for hypersonic missile platforms still use fins, similar to lower speed conventional missiles, and some using ducted fins. This is mostly due to lack of comprehension of hypersonic velocities in their own favor. Instead, the body itself incorporates those control surfaces, greatly enhancing the airframe strength, opening up more space for hardware and fuel capacity; while simultaneously enhancing the platforms maneuvering capabilities.

A scramjet missile can then fly like conventional missile platforms, and not straight and level at high altitudes, losing velocity on it's decent trajectory to target. Another added benefit to this aspect, is the ability to extend range greatly, so if anyone elses hypersonic missile platform were developed for 400 mile range, falling out of the sky due to lack of glide capabilities; our platforms can easily reach 600+ miles, with minimal glide deceleration.

BlueEdge - Mach 8-10 Hypersonic Commercial Aircraft, 220 Passenger Hypersonic Commercial Plane - Imaginactive Media Release ICAO

Courtesy of Imaginactive, ICAO, Charles Bombardier, and Martin Rico. Media Release of High Quality Renderings for mainstream media.

IO Aircraft: www.ioaircraft.com/hypersonic/blueedge.php

Imaginactive: imaginactive.org/2019/02/blue-edge/

Martin Rico, Industrial Graphics Designed: www.linkedin.com/in/mjrico/

Seating: 220 | Crew 2+4

Length: 195ft | Span: 93ft

Engines: 4 U-TBCC (Unified Turbine Based Combined Cycle) +1 Aerospike for sustained 2G acceleration to Mach 10.

Fuel: H2 (Compressed Hydrogen)

Cruising Altitude: 100,000-125,000ft

Airframe: 75% Proprietary Composites

Operating Costs, Similar to a 737. $7,000-$15,000hr, including averaged maintenence costs

Iteration 3 (Full release of IT3, Monday January 14, 2019)

IO Aircraft www.ioaircraft.com

Drew Blair www.linkedin.com/in/drew-b-25485312/

-----------------------------

hypersonic plane, hypersonic aircraft, Imaginactive, ICAO, International Civil Aviation Orginization, Charles Bombardier, Martin Rico, hypersonic commercial plane, hypersonic commercial aircraft, hypersonic airline, tbcc, glide breaker, fighter plane, hyperonic fighter, boeing phantom express, phantom works, boeing phantom works, lockheed skunk works, hypersonic weapon, hypersonic missile, scramjet missile, scramjet engineering, scramjet physics, boost glide, tactical glide vehicle, Boeing XS-1, htv, Air Launched Rapid Response Weapon, (ARRW), hypersonic tactical vehicle, space plane, scramjet, turbine based combined cycle, ramjet, dual mode ramjet, darpa, onr, navair, afrl, air force research lab, office of naval research, defense advanced research project agency, defense science, missile defense agency, aerospike, hydrogen, hydrogen storage, hydrogen fueled, hydrogen aircraft, virgin airlines, united airlines, sas, finnair ,emirates airlines, ANA, JAL, airlines, military, physics, airline, british airways, air france

-----------------------------

Unified Turbine Based Combined Cycle. Current technologies and what Lockheed is trying to force on the Dept of Defense, for that low speed Mach 5 plane DOD gave them $1 billion to build and would disintegrate above Mach 5, is TBCC. 2 separate propulsion systems in the same airframe, which requires TWICE the airframe space to use.

Unified Turbine Based Combined Cycle is 1 propulsion system cutting that airframe deficit in half, and also able to operate above Mach 10 up to Mach 15 in atmosphere, and a simple nozzle modification allows for outside atmosphere rocket mode, ie orbital capable.

Additionally, Reaction Engines maximum air breather mode is Mach 4.5, above that it will explode in flight from internal pressures are too high to operate. Thus, must switch to non air breather rocket mode to operate in atmosphere in hypersonic velocities. Which as a result, makes it not feasible for anything practical. It also takes an immense amount of fuel to function.

-------------

Advanced Additive Manufacturing for Hypersonic Aircraft

Utilizing new methods of fabrication and construction, make it possible to use additive manufacturing, dramatically reducing the time and costs of producing hypersonic platforms from missiles, aircraft, and space capable craft. Instead of aircraft being produced in piece, then bolted together; small platforms can be produced as a single unit and large platforms can be produces in large section and mated without bolting. These techniques include using exotic materials and advanced assembly processes, with an end result of streamlining the production costs and time for hypersonic aircraft; reducing months of assembly to weeks. Overall, this process greatly reduced the cost for producing hypersonic platforms. Even to such an extent that a Hellfire missile costs apx $100,000 but by utilizing our technologies, replacing it with a Mach 8-10 hypersonic missile of our physics/engineering and that missile would cost roughly $75,000 each delivered.

Materials used for these manufacturing processes are not disclosed, but overall, provides a foundation for extremely high stresses and thermodynamics, ideal for hypersonic platforms. This specific methodology and materials applications is many decades ahead of all known programs. Even to the extend of normalized space flight and re-entry, without concern of thermodynamic failure.

*Note, most entities that are experimenting with additive manufacturing for hypersonic aircraft, this makes it mainstream and standardized processes, which also applies for mass production.

What would normally be measured in years and perhaps a decade to go from drawing board to test flights, is reduced to singular months and ready for production within a year maximum.

Unified Turbine Based Combined Cycle (U-TBCC)

To date, the closest that NASA and industry have achieved for turbine based aircraft to fly at hypersonic velocities is by mounting a turbine into an aircraft and sharing the inlet with a scramjet or rocket based motor. Reaction Engines Sabre is not able to achieve hypersonic velocities and can only transition into a non air breathing rocket for beyond Mach 4.5

However, utilizing Unified Turbine Based Combine Cycle also known as U-TBCC, the two separate platforms are able to share a common inlet and the dual mode ramjet/scramjet is contained within the engine itself, which allows for a much smaller airframe footprint, thus engingeers are able to then design much higher performance aerial platforms for hypersonic flight, including the ability for constructing true single stage to orbit aircraft by utilizing a modification/version that allows for transition to outside atmosphere propulsion without any other propulsion platforms within the aircraft. By transitioning and developing aircraft to use Unified Turbine Based Combined Cycle, this propulsion system opens up new options to replace that airframe deficit for increased fuel capacity and/or payload.

Enhanced Dynamic Cavitation

Dramatically Increasing the efficiency of fuel air mixture for combustion processes at hypersonic velocities within scramjet propulsion platforms. The aspects of these processes are non disclosable.

Dynamic Scramjet Ignition Processes

For optimal scramjet ignition, a process known as Self Start is sought after, but in many cases if the platform becomes out of attitude, the scramjet will ignite. We have already solved this problem which as a result, a scramjet propulsion system can ignite at lower velocities, high velocities, at optimal attitude or not optimal attitude. It doesn't matter, it will ignite anyways at the proper point for maximum thrust capabilities at hypersonic velocities.

Hydrogen vs Kerosene Fuel Sources

Kerosene is an easy fuel to work with, and most western nations developing scramjet platforms use Kerosene for that fact. However, while kerosene has better thermal properties then Hydrogen, Hydrogen is a far superior fuel source in scramjet propulsion flight, do it having a much higher efficiency capability. Because of this aspect, in conjunction with our developments, it allows for a MUCH increased fuel to air mixture, combustion, thrust; and ability for higher speeds; instead of very low hypersonic velocities in the Mach 5-6 range. Instead, Mach 8-10 range, while we have begun developing hypersonic capabilities to exceed 15 in atmosphere within less then 5 years.

Conforming High Pressure Tank Technology for CNG and H2.

As most know in hypersonics, Hydrogen is a superior fuel source, but due to the storage abilities, can only be stored in cylinders thus much less fuel supply. Not anymore, we developed conforming high pressure storage technology for use in aerospace, automotive sectors, maritime, etc; which means any overall shape required for 8,000+ PSI CNG or Hydrogen. For hypersonic platforms, this means the ability to store a much larger volume of hydrogen vs cylinders.

As an example, X-43 flown by Nasa which flew at Mach 9.97. The fuel source was Hydrogen, which is extremely more volatile and combustible then kerosene (JP-7), via a cylinder in the main body. If it had used our technology, that entire section of the airframe would had been an 8,000 PSI H2 tank, which would had yielded 5-6 times the capacity. While the X-43 flew 11 seconds under power at Mach 9.97, at 6 times the fuel capacity would had yielded apx 66 seconds of fuel under power at Mach 9.97. If it had flew slower, around Mach 6, same principles applied would had yielded apx 500 seconds of fuel supply under power (slower speeds required less energy to maintain).

Enhanced Fuel Mixture During Shock Train Interaction

Normally, fuel injection is conducted at the correct insertion point within the shock train for maximum burn/combustion. Our methodologies differ, since almost half the fuel injection is conducted PRE shock train within the isolator, so at the point of isolator injection the fuel enhances the combustion process, which then requires less fuel injection to reach the same level of thrust capabilities.

Improved Bow Shock Interaction

Smoother interaction at hypersonic velocities and mitigating heat/stresses for beyond Mach 6 thermodynamics, which extraordinarily improves Type 3, 4, and 5 shock interaction.

6,000+ Fahrenheit Thermal Resistance

To date, the maximum thermal resistance was tested at AFRL in the spring of 2018, which resulted in a 3,200F thermal resistance for a short duration. This technology, allows for normalized hypersonic thermal resistance of 3,000-3,500F sustained, and up to 6,500F resistance for short endurance, ie 90 seconds or less. 10-20 minute resistance estimate approximately 4,500F +/- 200F.

*** This technology advancement also applies to Aerospike rocket engines, in which it is common for Aerospike's to exceed 4,500-5,000F temperatures, which results in the melting of the reversed bell housing. That melting no longer ocurrs, providing for stable combustion to ocurr for the entire flight envelope

Scramjet Propulsion Side Wall Cooling

With old technologies, side wall cooling is required for hypersonic flight and scramjet propulsion systems, otherwise the isolator and combustion regions of a scramjet would melt, even using advanced ablatives and ceramics, due to their inability to cope with very high temperatures. Using technology we have developed for very high thermodynamics and high stresses, side wall cooling is no longer required, thus removing that variable from the design process and focusing on improved ignition processes and increasing net thrust values.

Lower Threshold for Hypersonic Ignition

Active and adaptive flight dynamics, resulting in the ability for scramjet ignition at a much lower velocity, ie within ramjet envelope, between Mach 2-4, and seamless transition from supersonic to hypersonic flight, ie supersonic ramjet (scramjet). This active and dynamic aspect, has a wide variety of parameters for many flight dynamics, velocities, and altitudes; which means platforms no longer need to be engineered for specific altitude ranges or preset velocities, but those parameters can then be selected during launch configuration and are able to adapt actively in flight.

Dramatically Improved Maneuvering Capabilities at Hypersonic Velocities

Hypersonic vehicles, like their less technologically advanced brethren, use large actuator and the developers hope those controls surfaces do not disintegrate in flight. In reality, it is like rolling the dice, they may or may not survive, hence another reason why the attempt to keep velocities to Mach 6 or below. We have shrunken down control actuators while almost doubling torque and response capabilities specifically for hypersonic dynamics and extreme stresses involved, which makes it possible for maximum input authority for Mach 10 and beyond.

Paradigm Shift in Control Surface Methodologies, Increasing Control Authority (Internal Mechanical Applications)

To date, most control surfaces for hypersonic missile platforms still use fins, similar to lower speed conventional missiles, and some using ducted fins. This is mostly due to lack of comprehension of hypersonic velocities in their own favor. Instead, the body itself incorporates those control surfaces, greatly enhancing the airframe strength, opening up more space for hardware and fuel capacity; while simultaneously enhancing the platforms maneuvering capabilities.

A scramjet missile can then fly like conventional missile platforms, and not straight and level at high altitudes, losing velocity on it's decent trajectory to target. Another added benefit to this aspect, is the ability to extend range greatly, so if anyone elses hypersonic missile platform were developed for 400 mile range, falling out of the sky due to lack of glide capabilities; our platforms can easily reach 600+ miles, with minimal glide deceleration.

Blue Edge -Mach 8-10 Hypersonic Commercial Aircraft, It-1, 202 Passenger

Seating: 202 | Crew 2+4 (250 if denser seating)

Length: 195ft | Span: 93ft

Engines: 4 U-TBCC (Unified Turbine Based Combined Cycle)

+1 Aerospike for sustained 2G acceleration to Mach 10.

Fuel: H2 (Compressed Hydrogen)

Cruising Altitude: 100,000-125,000ft

Airframe: 75% Proprietary Composites

Operating Costs, Similar to a 737. $7,000-$15,000hr, including averaged maintenence costs

Iteration 1

IO Aircraft www.ioaircraft.com

Drew Blair www.linkedin.com/in/drew-b-25485312/

-----------------------------

hypersonic plane, hypersonic aircraft, hypersonic commercial plane, hypersonic commercial aircraft, hypersonic airline, tbcc, glide breaker, fighter plane, hyperonic fighter, boeing phantom express, phantom works, boeing phantom works, lockheed skunk works, hypersonic weapon, hypersonic missile, scramjet missile, scramjet engineering, scramjet physics, boost glide, tactical glide vehicle, Boeing XS-1, htv, Air Launched Rapid Response Weapon, (ARRW), hypersonic tactical vehicle, space plane, scramjet, turbine based combined cycle, ramjet, dual mode ramjet, darpa, onr, navair, afrl, air force research lab, office of naval research, defense advanced research project agency, defense science, missile defense agency, aerospike, hydrogen, hydrogen storage, hydrogen fueled, hydrogen aircraft

-----------------------------

Unified Turbine Based Combined Cycle. Current technologies and what Lockheed is trying to force on the Dept of Defense, for that low speed Mach 5 plane DOD gave them $1 billion to build and would disintegrate above Mach 5, is TBCC. 2 separate propulsion systems in the same airframe, which requires TWICE the airframe space to use.

Unified Turbine Based Combined Cycle is 1 propulsion system cutting that airframe deficit in half, and also able to operate above Mach 10 up to Mach 15 in atmosphere, and a simple nozzle modification allows for outside atmosphere rocket mode, ie orbital capable.

Additionally, Reaction Engines maximum air breather mode is Mach 4.5, above that it will explode in flight from internal pressures are too high to operate. Thus, must switch to non air breather rocket mode to operate in atmosphere in hypersonic velocities. Which as a result, makes it not feasible for anything practical. It also takes an immense amount of fuel to function.

-------------

Advanced Additive Manufacturing for Hypersonic Aircraft

Utilizing new methods of fabrication and construction, make it possible to use additive manufacturing, dramatically reducing the time and costs of producing hypersonic platforms from missiles, aircraft, and space capable craft. Instead of aircraft being produced in piece, then bolted together; small platforms can be produced as a single unit and large platforms can be produces in large section and mated without bolting. These techniques include using exotic materials and advanced assembly processes, with an end result of streamlining the production costs and time for hypersonic aircraft; reducing months of assembly to weeks. Overall, this process greatly reduced the cost for producing hypersonic platforms. Even to such an extent that a Hellfire missile costs apx $100,000 but by utilizing our technologies, replacing it with a Mach 8-10 hypersonic missile of our physics/engineering and that missile would cost roughly $75,000 each delivered.

Materials used for these manufacturing processes are not disclosed, but overall, provides a foundation for extremely high stresses and thermodynamics, ideal for hypersonic platforms. This specific methodology and materials applications is many decades ahead of all known programs. Even to the extend of normalized space flight and re-entry, without concern of thermodynamic failure.

*Note, most entities that are experimenting with additive manufacturing for hypersonic aircraft, this makes it mainstream and standardized processes, which also applies for mass production.

What would normally be measured in years and perhaps a decade to go from drawing board to test flights, is reduced to singular months and ready for production within a year maximum.

Unified Turbine Based Combined Cycle (U-TBCC)

To date, the closest that NASA and industry have achieved for turbine based aircraft to fly at hypersonic velocities is by mounting a turbine into an aircraft and sharing the inlet with a scramjet or rocket based motor. Reaction Engines Sabre is not able to achieve hypersonic velocities and can only transition into a non air breathing rocket for beyond Mach 4.5

However, utilizing Unified Turbine Based Combine Cycle also known as U-TBCC, the two separate platforms are able to share a common inlet and the dual mode ramjet/scramjet is contained within the engine itself, which allows for a much smaller airframe footprint, thus engingeers are able to then design much higher performance aerial platforms for hypersonic flight, including the ability for constructing true single stage to orbit aircraft by utilizing a modification/version that allows for transition to outside atmosphere propulsion without any other propulsion platforms within the aircraft. By transitioning and developing aircraft to use Unified Turbine Based Combined Cycle, this propulsion system opens up new options to replace that airframe deficit for increased fuel capacity and/or payload.

Enhanced Dynamic Cavitation

Dramatically Increasing the efficiency of fuel air mixture for combustion processes at hypersonic velocities within scramjet propulsion platforms. The aspects of these processes are non disclosable.

Dynamic Scramjet Ignition Processes

For optimal scramjet ignition, a process known as Self Start is sought after, but in many cases if the platform becomes out of attitude, the scramjet will ignite. We have already solved this problem which as a result, a scramjet propulsion system can ignite at lower velocities, high velocities, at optimal attitude or not optimal attitude. It doesn't matter, it will ignite anyways at the proper point for maximum thrust capabilities at hypersonic velocities.

Hydrogen vs Kerosene Fuel Sources

Kerosene is an easy fuel to work with, and most western nations developing scramjet platforms use Kerosene for that fact. However, while kerosene has better thermal properties then Hydrogen, Hydrogen is a far superior fuel source in scramjet propulsion flight, do it having a much higher efficiency capability. Because of this aspect, in conjunction with our developments, it allows for a MUCH increased fuel to air mixture, combustion, thrust; and ability for higher speeds; instead of very low hypersonic velocities in the Mach 5-6 range. Instead, Mach 8-10 range, while we have begun developing hypersonic capabilities to exceed 15 in atmosphere within less then 5 years.

Conforming High Pressure Tank Technology for CNG and H2.

As most know in hypersonics, Hydrogen is a superior fuel source, but due to the storage abilities, can only be stored in cylinders thus much less fuel supply. Not anymore, we developed conforming high pressure storage technology for use in aerospace, automotive sectors, maritime, etc; which means any overall shape required for 8,000+ PSI CNG or Hydrogen. For hypersonic platforms, this means the ability to store a much larger volume of hydrogen vs cylinders.

As an example, X-43 flown by Nasa which flew at Mach 9.97. The fuel source was Hydrogen, which is extremely more volatile and combustible then kerosene (JP-7), via a cylinder in the main body. If it had used our technology, that entire section of the airframe would had been an 8,000 PSI H2 tank, which would had yielded 5-6 times the capacity. While the X-43 flew 11 seconds under power at Mach 9.97, at 6 times the fuel capacity would had yielded apx 66 seconds of fuel under power at Mach 9.97. If it had flew slower, around Mach 6, same principles applied would had yielded apx 500 seconds of fuel supply under power (slower speeds required less energy to maintain).

Enhanced Fuel Mixture During Shock Train Interaction

Normally, fuel injection is conducted at the correct insertion point within the shock train for maximum burn/combustion. Our methodologies differ, since almost half the fuel injection is conducted PRE shock train within the isolator, so at the point of isolator injection the fuel enhances the combustion process, which then requires less fuel injection to reach the same level of thrust capabilities.

Improved Bow Shock Interaction

Smoother interaction at hypersonic velocities and mitigating heat/stresses for beyond Mach 6 thermodynamics, which extraordinarily improves Type 3, 4, and 5 shock interaction.

6,000+ Fahrenheit Thermal Resistance

To date, the maximum thermal resistance was tested at AFRL in the spring of 2018, which resulted in a 3,200F thermal resistance for a short duration. This technology, allows for normalized hypersonic thermal resistance of 3,000-3,500F sustained, and up to 6,500F resistance for short endurance, ie 90 seconds or less. 10-20 minute resistance estimate approximately 4,500F +/- 200F.

*** This technology advancement also applies to Aerospike rocket engines, in which it is common for Aerospike's to exceed 4,500-5,000F temperatures, which results in the melting of the reversed bell housing. That melting no longer ocurrs, providing for stable combustion to ocurr for the entire flight envelope

Scramjet Propulsion Side Wall Cooling

With old technologies, side wall cooling is required for hypersonic flight and scramjet propulsion systems, otherwise the isolator and combustion regions of a scramjet would melt, even using advanced ablatives and ceramics, due to their inability to cope with very high temperatures. Using technology we have developed for very high thermodynamics and high stresses, side wall cooling is no longer required, thus removing that variable from the design process and focusing on improved ignition processes and increasing net thrust values.

Lower Threshold for Hypersonic Ignition

Active and adaptive flight dynamics, resulting in the ability for scramjet ignition at a much lower velocity, ie within ramjet envelope, between Mach 2-4, and seamless transition from supersonic to hypersonic flight, ie supersonic ramjet (scramjet). This active and dynamic aspect, has a wide variety of parameters for many flight dynamics, velocities, and altitudes; which means platforms no longer need to be engineered for specific altitude ranges or preset velocities, but those parameters can then be selected during launch configuration and are able to adapt actively in flight.

Dramatically Improved Maneuvering Capabilities at Hypersonic Velocities

Hypersonic vehicles, like their less technologically advanced brethren, use large actuator and the developers hope those controls surfaces do not disintegrate in flight. In reality, it is like rolling the dice, they may or may not survive, hence another reason why the attempt to keep velocities to Mach 6 or below. We have shrunken down control actuators while almost doubling torque and response capabilities specifically for hypersonic dynamics and extreme stresses involved, which makes it possible for maximum input authority for Mach 10 and beyond.

Paradigm Shift in Control Surface Methodologies, Increasing Control Authority (Internal Mechanical Applications)

To date, most control surfaces for hypersonic missile platforms still use fins, similar to lower speed conventional missiles, and some using ducted fins. This is mostly due to lack of comprehension of hypersonic velocities in their own favor. Instead, the body itself incorporates those control surfaces, greatly enhancing the airframe strength, opening up more space for hardware and fuel capacity; while simultaneously enhancing the platforms maneuvering capabilities.

A scramjet missile can then fly like conventional missile platforms, and not straight and level at high altitudes, losing velocity on it's decent trajectory to target. Another added benefit to this aspect, is the ability to extend range greatly, so if anyone elses hypersonic missile platform were developed for 400 mile range, falling out of the sky due to lack of glide capabilities; our platforms can easily reach 600+ miles, with minimal glide deceleration.

The Horrockses Cotton Fairies take you on a tour of the cotton manufacturing processes at three of their Preston Mills - Yard Works, Centenary / New Preston and Fishwick.

This was Horrockses - Crewdson's contribution to the 1920 trade publication Concerning Cotton - A brief account of the aims and achievements of the Amalgamated Cotton Mills Trust Limited and it's component companies.

TO ENLARGE - either:

1. Right-click the image then choose Original or...

2. Select View all sizes from the Actions tab then choose Original

Io Aircraft - www.ioaircraft.com

Drew Blair

www.linkedin.com/in/drew-b-25485312/

io aircraft, phantom express, phantom works, boeing phantom works, lockheed skunk works, hypersonic weapon, hypersonic missile, scramjet missile, scramjet engineering, scramjet physics, boost glide, tactical glide vehicle, Boeing XS-1, htv, Air-Launched Rapid Response Weapon, (ARRW), hypersonic tactical vehicle, hypersonic plane, hypersonic aircraft, space plane, scramjet, turbine based combined cycle, ramjet, dual mode ramjet, darpa, onr, navair, afrl, air force research lab, defense science, missile defense agency, aerospike,

Advanced Additive Manufacturing for Hypersonic Aircraft

Utilizing new methods of fabrication and construction, make it possible to use additive manufacturing, dramatically reducing the time and costs of producing hypersonic platforms from missiles, aircraft, and space capable craft. Instead of aircraft being produced in piece, then bolted together; small platforms can be produced as a single unit and large platforms can be produces in large section and mated without bolting. These techniques include using exotic materials and advanced assembly processes, with an end result of streamlining the production costs and time for hypersonic aircraft; reducing months of assembly to weeks. Overall, this process greatly reduced the cost for producing hypersonic platforms. Even to such an extent that a Hellfire missile costs apx $100,000 but by utilizing our technologies, replacing it with a Mach 8-10 hypersonic missile of our physics/engineering and that missile would cost roughly $75,000 each delivered.

Materials used for these manufacturing processes are not disclosed, but overall, provides a foundation for extremely high stresses and thermodynamics, ideal for hypersonic platforms. This specific methodology and materials applications is many decades ahead of all known programs. Even to the extend of normalized space flight and re-entry, without concern of thermodynamic failure.

*Note, most entities that are experimenting with additive manufacturing for hypersonic aircraft, this makes it mainstream and standardized processes, which also applies for mass production.

What would normally be measured in years and perhaps a decade to go from drawing board to test flights, is reduced to singular months and ready for production within a year maximum.

Unified Turbine Based Combined Cycle (U-TBCC)

To date, the closest that NASA and industry have achieved for turbine based aircraft to fly at hypersonic velocities is by mounting a turbine into an aircraft and sharing the inlet with a scramjet or rocket based motor. Reaction Engines Sabre is not able to achieve hypersonic velocities and can only transition into a non air breathing rocket for beyond Mach 4.5

However, utilizing Unified Turbine Based Combine Cycle also known as U-TBCC, the two separate platforms are able to share a common inlet and the dual mode ramjet/scramjet is contained within the engine itself, which allows for a much smaller airframe footprint, thus engingeers are able to then design much higher performance aerial platforms for hypersonic flight, including the ability for constructing true single stage to orbit aircraft by utilizing a modification/version that allows for transition to outside atmosphere propulsion without any other propulsion platforms within the aircraft. By transitioning and developing aircraft to use Unified Turbine Based Combined Cycle, this propulsion system opens up new options to replace that airframe deficit for increased fuel capacity and/or payload.

Enhanced Dynamic Cavitation

Dramatically Increasing the efficiency of fuel air mixture for combustion processes at hypersonic velocities within scramjet propulsion platforms. The aspects of these processes are non disclosable.

Dynamic Scramjet Ignition Processes

For optimal scramjet ignition, a process known as Self Start is sought after, but in many cases if the platform becomes out of attitude, the scramjet will ignite. We have already solved this problem which as a result, a scramjet propulsion system can ignite at lower velocities, high velocities, at optimal attitude or not optimal attitude. It doesn't matter, it will ignite anyways at the proper point for maximum thrust capabilities at hypersonic velocities.

Hydrogen vs Kerosene Fuel Sources

Kerosene is an easy fuel to work with, and most western nations developing scramjet platforms use Kerosene for that fact. However, while kerosene has better thermal properties then Hydrogen, Hydrogen is a far superior fuel source in scramjet propulsion flight, do it having a much higher efficiency capability. Because of this aspect, in conjunction with our developments, it allows for a MUCH increased fuel to air mixture, combustion, thrust; and ability for higher speeds; instead of very low hypersonic velocities in the Mach 5-6 range. Instead, Mach 8-10 range, while we have begun developing hypersonic capabilities to exceed 15 in atmosphere within less then 5 years.

Conforming High Pressure Tank Technology for CNG and H2.

As most know in hypersonics, Hydrogen is a superior fuel source, but due to the storage abilities, can only be stored in cylinders thus much less fuel supply. Not anymore, we developed conforming high pressure storage technology for use in aerospace, automotive sectors, maritime, etc; which means any overall shape required for 8,000+ PSI CNG or Hydrogen. For hypersonic platforms, this means the ability to store a much larger volume of hydrogen vs cylinders.

As an example, X-43 flown by Nasa which flew at Mach 9.97. The fuel source was Hydrogen, which is extremely more volatile and combustible then kerosene (JP-7), via a cylinder in the main body. If it had used our technology, that entire section of the airframe would had been an 8,000 PSI H2 tank, which would had yielded 5-6 times the capacity. While the X-43 flew 11 seconds under power at Mach 9.97, at 6 times the fuel capacity would had yielded apx 66 seconds of fuel under power at Mach 9.97. If it had flew slower, around Mach 6, same principles applied would had yielded apx 500 seconds of fuel supply under power (slower speeds required less energy to maintain).

Enhanced Fuel Mixture During Shock Train Interaction

Normally, fuel injection is conducted at the correct insertion point within the shock train for maximum burn/combustion. Our methodologies differ, since almost half the fuel injection is conducted PRE shock train within the isolator, so at the point of isolator injection the fuel enhances the combustion process, which then requires less fuel injection to reach the same level of thrust capabilities.

Improved Bow Shock Interaction

Smoother interaction at hypersonic velocities and mitigating heat/stresses for beyond Mach 6 thermodynamics, which extraordinarily improves Type 3, 4, and 5 shock interaction.

6,000+ Fahrenheit Thermal Resistance

To date, the maximum thermal resistance was tested at AFRL in the spring of 2018, which resulted in a 3,200F thermal resistance for a short duration. This technology, allows for normalized hypersonic thermal resistance of 3,000-3,500F sustained, and up to 6,500F resistance for short endurance, ie 90 seconds or less. 10-20 minute resistance estimate approximately 4,500F +/- 200F.

*** This technology advancement also applies to Aerospike rocket engines, in which it is common for Aerospike's to exceed 4,500-5,000F temperatures, which results in the melting of the reversed bell housing. That melting no longer ocurrs, providing for stable combustion to ocurr for the entire flight envelope

Scramjet Propulsion Side Wall Cooling

With old technologies, side wall cooling is required for hypersonic flight and scramjet propulsion systems, otherwise the isolator and combustion regions of a scramjet would melt, even using advanced ablatives and ceramics, due to their inability to cope with very high temperatures. Using technology we have developed for very high thermodynamics and high stresses, side wall cooling is no longer required, thus removing that variable from the design process and focusing on improved ignition processes and increasing net thrust values.

Lower Threshold for Hypersonic Ignition

Active and adaptive flight dynamics, resulting in the ability for scramjet ignition at a much lower velocity, ie within ramjet envelope, between Mach 2-4, and seamless transition from supersonic to hypersonic flight, ie supersonic ramjet (scramjet). This active and dynamic aspect, has a wide variety of parameters for many flight dynamics, velocities, and altitudes; which means platforms no longer need to be engineered for specific altitude ranges or preset velocities, but those parameters can then be selected during launch configuration and are able to adapt actively in flight.

Dramatically Improved Maneuvering Capabilities at Hypersonic Velocities

Hypersonic vehicles, like their less technologically advanced brethren, use large actuator and the developers hope those controls surfaces do not disintegrate in flight. In reality, it is like rolling the dice, they may or may not survive, hence another reason why the attempt to keep velocities to Mach 6 or below. We have shrunken down control actuators while almost doubling torque and response capabilities specifically for hypersonic dynamics and extreme stresses involved, which makes it possible for maximum input authority for Mach 10 and beyond.

Paradigm Shift in Control Surface Methodologies, Increasing Control Authority (Internal Mechanical Applications)

To date, most control surfaces for hypersonic missile platforms still use fins, similar to lower speed conventional missiles, and some using ducted fins. This is mostly due to lack of comprehension of hypersonic velocities in their own favor. Instead, the body itself incorporates those control surfaces, greatly enhancing the airframe strength, opening up more space for hardware and fuel capacity; while simultaneously enhancing the platforms maneuvering capabilities.

A scramjet missile can then fly like conventional missile platforms, and not straight and level at high altitudes, losing velocity on it's decent trajectory to target. Another added benefit to this aspect, is the ability to extend range greatly, so if anyone elses hypersonic missile platform were developed for 400 mile range, falling out of the sky due to lack of glide capabilities; our platforms can easily reach 600+ miles, with minimal glide deceleration.

BlueEdge - Mach 8-10 Hypersonic Commercial Aircraft, 220 Passenger Hypersonic Commercial Plane - Iteration 3

Seating: 220 | Crew 2+4

Length: 195ft | Span: 93ft

Engines: 4 U-TBCC (Unified Turbine Based Combined Cycle) +1 Aerospike for sustained 2G acceleration to Mach 10.

Fuel: H2 (Compressed Hydrogen)

Cruising Altitude: 100,000-125,000ft

Airframe: 75% Proprietary Composites

Operating Costs, Similar to a 737. $7,000-$15,000hr, including averaged maintenence costs

Iteration 3 (Full release of IT3, Monday January 14, 2019)

IO Aircraft www.ioaircraft.com

Drew Blair www.linkedin.com/in/drew-b-25485312/

-----------------------------

hypersonic plane, hypersonic aircraft, hypersonic commercial plane, hypersonic commercial aircraft, hypersonic airline, tbcc, glide breaker, fighter plane, hyperonic fighter, boeing phantom express, phantom works, boeing phantom works, lockheed skunk works, hypersonic weapon, hypersonic missile, scramjet missile, scramjet engineering, scramjet physics, boost glide, tactical glide vehicle, Boeing XS-1, htv, Air Launched Rapid Response Weapon, (ARRW), hypersonic tactical vehicle, space plane, scramjet, turbine based combined cycle, ramjet, dual mode ramjet, darpa, onr, navair, afrl, air force research lab, office of naval research, defense advanced research project agency, defense science, missile defense agency, aerospike, hydrogen, hydrogen storage, hydrogen fueled, hydrogen aircraft, virgin airlines, united airlines, sas, finnair ,emirates airlines, ANA, JAL, airlines, military, physics, airline, british airways, air france

-----------------------------

Unified Turbine Based Combined Cycle. Current technologies and what Lockheed is trying to force on the Dept of Defense, for that low speed Mach 5 plane DOD gave them $1 billion to build and would disintegrate above Mach 5, is TBCC. 2 separate propulsion systems in the same airframe, which requires TWICE the airframe space to use.

Unified Turbine Based Combined Cycle is 1 propulsion system cutting that airframe deficit in half, and also able to operate above Mach 10 up to Mach 15 in atmosphere, and a simple nozzle modification allows for outside atmosphere rocket mode, ie orbital capable.

Additionally, Reaction Engines maximum air breather mode is Mach 4.5, above that it will explode in flight from internal pressures are too high to operate. Thus, must switch to non air breather rocket mode to operate in atmosphere in hypersonic velocities. Which as a result, makes it not feasible for anything practical. It also takes an immense amount of fuel to function.

-------------

Advanced Additive Manufacturing for Hypersonic Aircraft

Utilizing new methods of fabrication and construction, make it possible to use additive manufacturing, dramatically reducing the time and costs of producing hypersonic platforms from missiles, aircraft, and space capable craft. Instead of aircraft being produced in piece, then bolted together; small platforms can be produced as a single unit and large platforms can be produces in large section and mated without bolting. These techniques include using exotic materials and advanced assembly processes, with an end result of streamlining the production costs and time for hypersonic aircraft; reducing months of assembly to weeks. Overall, this process greatly reduced the cost for producing hypersonic platforms. Even to such an extent that a Hellfire missile costs apx $100,000 but by utilizing our technologies, replacing it with a Mach 8-10 hypersonic missile of our physics/engineering and that missile would cost roughly $75,000 each delivered.

Materials used for these manufacturing processes are not disclosed, but overall, provides a foundation for extremely high stresses and thermodynamics, ideal for hypersonic platforms. This specific methodology and materials applications is many decades ahead of all known programs. Even to the extend of normalized space flight and re-entry, without concern of thermodynamic failure.

*Note, most entities that are experimenting with additive manufacturing for hypersonic aircraft, this makes it mainstream and standardized processes, which also applies for mass production.

What would normally be measured in years and perhaps a decade to go from drawing board to test flights, is reduced to singular months and ready for production within a year maximum.

Unified Turbine Based Combined Cycle (U-TBCC)

To date, the closest that NASA and industry have achieved for turbine based aircraft to fly at hypersonic velocities is by mounting a turbine into an aircraft and sharing the inlet with a scramjet or rocket based motor. Reaction Engines Sabre is not able to achieve hypersonic velocities and can only transition into a non air breathing rocket for beyond Mach 4.5

However, utilizing Unified Turbine Based Combine Cycle also known as U-TBCC, the two separate platforms are able to share a common inlet and the dual mode ramjet/scramjet is contained within the engine itself, which allows for a much smaller airframe footprint, thus engingeers are able to then design much higher performance aerial platforms for hypersonic flight, including the ability for constructing true single stage to orbit aircraft by utilizing a modification/version that allows for transition to outside atmosphere propulsion without any other propulsion platforms within the aircraft. By transitioning and developing aircraft to use Unified Turbine Based Combined Cycle, this propulsion system opens up new options to replace that airframe deficit for increased fuel capacity and/or payload.

Enhanced Dynamic Cavitation

Dramatically Increasing the efficiency of fuel air mixture for combustion processes at hypersonic velocities within scramjet propulsion platforms. The aspects of these processes are non disclosable.

Dynamic Scramjet Ignition Processes

For optimal scramjet ignition, a process known as Self Start is sought after, but in many cases if the platform becomes out of attitude, the scramjet will ignite. We have already solved this problem which as a result, a scramjet propulsion system can ignite at lower velocities, high velocities, at optimal attitude or not optimal attitude. It doesn't matter, it will ignite anyways at the proper point for maximum thrust capabilities at hypersonic velocities.

Hydrogen vs Kerosene Fuel Sources

Kerosene is an easy fuel to work with, and most western nations developing scramjet platforms use Kerosene for that fact. However, while kerosene has better thermal properties then Hydrogen, Hydrogen is a far superior fuel source in scramjet propulsion flight, do it having a much higher efficiency capability. Because of this aspect, in conjunction with our developments, it allows for a MUCH increased fuel to air mixture, combustion, thrust; and ability for higher speeds; instead of very low hypersonic velocities in the Mach 5-6 range. Instead, Mach 8-10 range, while we have begun developing hypersonic capabilities to exceed 15 in atmosphere within less then 5 years.

Conforming High Pressure Tank Technology for CNG and H2.

As most know in hypersonics, Hydrogen is a superior fuel source, but due to the storage abilities, can only be stored in cylinders thus much less fuel supply. Not anymore, we developed conforming high pressure storage technology for use in aerospace, automotive sectors, maritime, etc; which means any overall shape required for 8,000+ PSI CNG or Hydrogen. For hypersonic platforms, this means the ability to store a much larger volume of hydrogen vs cylinders.

As an example, X-43 flown by Nasa which flew at Mach 9.97. The fuel source was Hydrogen, which is extremely more volatile and combustible then kerosene (JP-7), via a cylinder in the main body. If it had used our technology, that entire section of the airframe would had been an 8,000 PSI H2 tank, which would had yielded 5-6 times the capacity. While the X-43 flew 11 seconds under power at Mach 9.97, at 6 times the fuel capacity would had yielded apx 66 seconds of fuel under power at Mach 9.97. If it had flew slower, around Mach 6, same principles applied would had yielded apx 500 seconds of fuel supply under power (slower speeds required less energy to maintain).

Enhanced Fuel Mixture During Shock Train Interaction

Normally, fuel injection is conducted at the correct insertion point within the shock train for maximum burn/combustion. Our methodologies differ, since almost half the fuel injection is conducted PRE shock train within the isolator, so at the point of isolator injection the fuel enhances the combustion process, which then requires less fuel injection to reach the same level of thrust capabilities.

Improved Bow Shock Interaction

Smoother interaction at hypersonic velocities and mitigating heat/stresses for beyond Mach 6 thermodynamics, which extraordinarily improves Type 3, 4, and 5 shock interaction.

6,000+ Fahrenheit Thermal Resistance

To date, the maximum thermal resistance was tested at AFRL in the spring of 2018, which resulted in a 3,200F thermal resistance for a short duration. This technology, allows for normalized hypersonic thermal resistance of 3,000-3,500F sustained, and up to 6,500F resistance for short endurance, ie 90 seconds or less. 10-20 minute resistance estimate approximately 4,500F +/- 200F.

*** This technology advancement also applies to Aerospike rocket engines, in which it is common for Aerospike's to exceed 4,500-5,000F temperatures, which results in the melting of the reversed bell housing. That melting no longer ocurrs, providing for stable combustion to ocurr for the entire flight envelope

Scramjet Propulsion Side Wall Cooling

With old technologies, side wall cooling is required for hypersonic flight and scramjet propulsion systems, otherwise the isolator and combustion regions of a scramjet would melt, even using advanced ablatives and ceramics, due to their inability to cope with very high temperatures. Using technology we have developed for very high thermodynamics and high stresses, side wall cooling is no longer required, thus removing that variable from the design process and focusing on improved ignition processes and increasing net thrust values.

Lower Threshold for Hypersonic Ignition

Active and adaptive flight dynamics, resulting in the ability for scramjet ignition at a much lower velocity, ie within ramjet envelope, between Mach 2-4, and seamless transition from supersonic to hypersonic flight, ie supersonic ramjet (scramjet). This active and dynamic aspect, has a wide variety of parameters for many flight dynamics, velocities, and altitudes; which means platforms no longer need to be engineered for specific altitude ranges or preset velocities, but those parameters can then be selected during launch configuration and are able to adapt actively in flight.

Dramatically Improved Maneuvering Capabilities at Hypersonic Velocities

Hypersonic vehicles, like their less technologically advanced brethren, use large actuator and the developers hope those controls surfaces do not disintegrate in flight. In reality, it is like rolling the dice, they may or may not survive, hence another reason why the attempt to keep velocities to Mach 6 or below. We have shrunken down control actuators while almost doubling torque and response capabilities specifically for hypersonic dynamics and extreme stresses involved, which makes it possible for maximum input authority for Mach 10 and beyond.

Paradigm Shift in Control Surface Methodologies, Increasing Control Authority (Internal Mechanical Applications)

To date, most control surfaces for hypersonic missile platforms still use fins, similar to lower speed conventional missiles, and some using ducted fins. This is mostly due to lack of comprehension of hypersonic velocities in their own favor. Instead, the body itself incorporates those control surfaces, greatly enhancing the airframe strength, opening up more space for hardware and fuel capacity; while simultaneously enhancing the platforms maneuvering capabilities.

A scramjet missile can then fly like conventional missile platforms, and not straight and level at high altitudes, losing velocity on it's decent trajectory to target. Another added benefit to this aspect, is the ability to extend range greatly, so if anyone elses hypersonic missile platform were developed for 400 mile range, falling out of the sky due to lack of glide capabilities; our platforms can easily reach 600+ miles, with minimal glide deceleration.

Hyperion, Hypersonic Mach 15 Scramjet Missile - IO Aircraft - ARRW, HAWC, Air Launched Rapid Response Weapon

Length: 120" / Span 25"

www.ioaircraft.com

Scramjet, Hypersonic, ARRW, HAWC, Air Launched Rapid Response Weapon, Scramjet Physics, Scramjet Engineering, Hypersonic Missile, hypersonic weapon, hypersonic fighter, hypersonic fighter plane, tgv, tactical glide vehicle, hypersonic commercial aircraft, hypersonic commercial plane, hypersonic aircraft, hypersonic plane, hypersonic airline, tbcc, glide breaker, fighter plane, hypersonic fighter, boeing phantom express, phantom works, boeing phantom works, lockheed skunk works, boost glide, tactical glide vehicle, space plane, scramjet, turbine based combined cycle, ramjet, dual mode ramjet, defense science, missile defense agency, aerospike, hydrogen aircraft, airlines, military, physics, airline, aerion supersonic, aerion, spike aerospace, boom supersonic, , darpa, onr, navair, afrl, air force research lab, office of naval research, defense advanced research project agency, afosr, socom, arl, army future command, mda, missile defense agenci, dia, defense intelligence agency, Air Force Office of Scientific Research,

Iteration V8, Hyperion Mach 15 #hypersonic #scramjet (50% faster then the X-43 #nasa), 300% faster than #Lockheed, #NorthropGrumman, #Raytheon, and Boeing. Much is sanitized as the technology advances are dramatic and not public.

DOD's funding of #AGM-183A / Air Launched Rapid Response Weapon, the poeple developing it barely comprehend student level capabilities and 50/50 it will disintegrate even at Mach 5. China and Russia, already much faster and higher tech making it obsolete already, India's recent test, apx 700 mph faster.

Summarized details are accurate

#hypersonic #hypersonics #scramjet #hypersonicplane #hypersonicaircraft #skunkworks #spaceplane #boeing #lockheed #raytheon #bae #bombardier #airbus #northopgrumman #generaldynamics #utc #ge #afrl #onr #afosr #ReactionEngines #spacex #virginorbit #usaf #darpa #mda #rollsroyce #nasa #tesla #safran #embraer #AirLaunchedRapidResponseWeapon #additivemanufacturing #military #physics #3dprinting #supersonic #ramjet #tbcc #collinsaerospace #rockwell #phantomworks #hypersonicmissile #alrrw #boeingphantomworks #generalatomics #cessna #dassault #arl #unitedlaunchalliance #spaceshipcompany #navair #diu #dia #usaf #unitedtechnologies #defenseadvancedresearchprojectagency #graphene #additivemanufacturing

-----------------------------

Unified Turbine Based Combined Cycle. Current technologies and what Lockheed is trying to force on the Dept of Defense, for that low speed Mach 5 plane DOD gave them $1 billion to build and would disintegrate above Mach 5, is TBCC. 2 separate propulsion systems in the same airframe, which requires TWICE the airframe space to use.

Unified Turbine Based Combined Cycle is 1 propulsion system cutting that airframe deficit in half, and also able to operate above Mach 10 up to Mach 15 in atmosphere, and a simple nozzle modification allows for outside atmosphere rocket mode, ie orbital capable.

Additionally, Reaction Engines maximum air breather mode is Mach 4.5, above that it will explode in flight from internal pressures are too high to operate. Thus, must switch to non air breather rocket mode to operate in atmosphere in hypersonic velocities. Which as a result, makes it not feasible for anything practical. It also takes an immense amount of fuel to function.

-------------

Advanced Additive Manufacturing for Hypersonic Aircraft

Utilizing new methods of fabrication and construction, make it possible to use additive manufacturing, dramatically reducing the time and costs of producing hypersonic platforms from missiles, aircraft, and space capable craft. Instead of aircraft being produced in piece, then bolted together; small platforms can be produced as a single unit and large platforms can be produces in large section and mated without bolting. These techniques include using exotic materials and advanced assembly processes, with an end result of streamlining the production costs and time for hypersonic aircraft; reducing months of assembly to weeks. Overall, this process greatly reduced the cost for producing hypersonic platforms. Even to such an extent that a Hellfire missile costs apx $100,000 but by utilizing our technologies, replacing it with a Mach 8-10 hypersonic missile of our physics/engineering and that missile would cost roughly $75,000 each delivered.

Materials used for these manufacturing processes are not disclosed, but overall, provides a foundation for extremely high stresses and thermodynamics, ideal for hypersonic platforms. This specific methodology and materials applications is many decades ahead of all known programs. Even to the extend of normalized space flight and re-entry, without concern of thermodynamic failure.

*Note, most entities that are experimenting with additive manufacturing for hypersonic aircraft, this makes it mainstream and standardized processes, which also applies for mass production.

What would normally be measured in years and perhaps a decade to go from drawing board to test flights, is reduced to singular months and ready for production within a year maximum.

Unified Turbine Based Combined Cycle (U-TBCC)

To date, the closest that NASA and industry have achieved for turbine based aircraft to fly at hypersonic velocities is by mounting a turbine into an aircraft and sharing the inlet with a scramjet or rocket based motor. Reaction Engines Sabre is not able to achieve hypersonic velocities and can only transition into a non air breathing rocket for beyond Mach 4.5

However, utilizing Unified Turbine Based Combine Cycle also known as U-TBCC, the two separate platforms are able to share a common inlet and the dual mode ramjet/scramjet is contained within the engine itself, which allows for a much smaller airframe footprint, thus engingeers are able to then design much higher performance aerial platforms for hypersonic flight, including the ability for constructing true single stage to orbit aircraft by utilizing a modification/version that allows for transition to outside atmosphere propulsion without any other propulsion platforms within the aircraft. By transitioning and developing aircraft to use Unified Turbine Based Combined Cycle, this propulsion system opens up new options to replace that airframe deficit for increased fuel capacity and/or payload.

Enhanced Dynamic Cavitation

Dramatically Increasing the efficiency of fuel air mixture for combustion processes at hypersonic velocities within scramjet propulsion platforms. The aspects of these processes are non disclosable.

Dynamic Scramjet Ignition Processes

For optimal scramjet ignition, a process known as Self Start is sought after, but in many cases if the platform becomes out of attitude, the scramjet will ignite. We have already solved this problem which as a result, a scramjet propulsion system can ignite at lower velocities, high velocities, at optimal attitude or not optimal attitude. It doesn't matter, it will ignite anyways at the proper point for maximum thrust capabilities at hypersonic velocities.

Hydrogen vs Kerosene Fuel Sources

Kerosene is an easy fuel to work with, and most western nations developing scramjet platforms use Kerosene for that fact. However, while kerosene has better thermal properties then Hydrogen, Hydrogen is a far superior fuel source in scramjet propulsion flight, do it having a much higher efficiency capability. Because of this aspect, in conjunction with our developments, it allows for a MUCH increased fuel to air mixture, combustion, thrust; and ability for higher speeds; instead of very low hypersonic velocities in the Mach 5-6 range. Instead, Mach 8-10 range, while we have begun developing hypersonic capabilities to exceed 15 in atmosphere within less then 5 years.

Conforming High Pressure Tank Technology for CNG and H2.

As most know in hypersonics, Hydrogen is a superior fuel source, but due to the storage abilities, can only be stored in cylinders thus much less fuel supply. Not anymore, we developed conforming high pressure storage technology for use in aerospace, automotive sectors, maritime, etc; which means any overall shape required for 8,000+ PSI CNG or Hydrogen. For hypersonic platforms, this means the ability to store a much larger volume of hydrogen vs cylinders.

As an example, X-43 flown by Nasa which flew at Mach 9.97. The fuel source was Hydrogen, which is extremely more volatile and combustible then kerosene (JP-7), via a cylinder in the main body. If it had used our technology, that entire section of the airframe would had been an 8,000 PSI H2 tank, which would had yielded 5-6 times the capacity. While the X-43 flew 11 seconds under power at Mach 9.97, at 6 times the fuel capacity would had yielded apx 66 seconds of fuel under power at Mach 9.97. If it had flew slower, around Mach 6, same principles applied would had yielded apx 500 seconds of fuel supply under power (slower speeds required less energy to maintain).

Enhanced Fuel Mixture During Shock Train Interaction

Normally, fuel injection is conducted at the correct insertion point within the shock train for maximum burn/combustion. Our methodologies differ, since almost half the fuel injection is conducted PRE shock train within the isolator, so at the point of isolator injection the fuel enhances the combustion process, which then requires less fuel injection to reach the same level of thrust capabilities.

Improved Bow Shock Interaction

Smoother interaction at hypersonic velocities and mitigating heat/stresses for beyond Mach 6 thermodynamics, which extraordinarily improves Type 3, 4, and 5 shock interaction.

6,000+ Fahrenheit Thermal Resistance

To date, the maximum thermal resistance was tested at AFRL in the spring of 2018, which resulted in a 3,200F thermal resistance for a short duration. This technology, allows for normalized hypersonic thermal resistance of 3,000-3,500F sustained, and up to 6,500F resistance for short endurance, ie 90 seconds or less. 10-20 minute resistance estimate approximately 4,500F +/- 200F.

*** This technology advancement also applies to Aerospike rocket engines, in which it is common for Aerospike's to exceed 4,500-5,000F temperatures, which results in the melting of the reversed bell housing. That melting no longer ocurrs, providing for stable combustion to ocurr for the entire flight envelope

Scramjet Propulsion Side Wall Cooling

With old technologies, side wall cooling is required for hypersonic flight and scramjet propulsion systems, otherwise the isolator and combustion regions of a scramjet would melt, even using advanced ablatives and ceramics, due to their inability to cope with very high temperatures. Using technology we have developed for very high thermodynamics and high stresses, side wall cooling is no longer required, thus removing that variable from the design process and focusing on improved ignition processes and increasing net thrust values.

Lower Threshold for Hypersonic Ignition

Active and adaptive flight dynamics, resulting in the ability for scramjet ignition at a much lower velocity, ie within ramjet envelope, between Mach 2-4, and seamless transition from supersonic to hypersonic flight, ie supersonic ramjet (scramjet). This active and dynamic aspect, has a wide variety of parameters for many flight dynamics, velocities, and altitudes; which means platforms no longer need to be engineered for specific altitude ranges or preset velocities, but those parameters can then be selected during launch configuration and are able to adapt actively in flight.

Dramatically Improved Maneuvering Capabilities at Hypersonic Velocities

Hypersonic vehicles, like their less technologically advanced brethren, use large actuator and the developers hope those controls surfaces do not disintegrate in flight. In reality, it is like rolling the dice, they may or may not survive, hence another reason why the attempt to keep velocities to Mach 6 or below. We have shrunken down control actuators while almost doubling torque and response capabilities specifically for hypersonic dynamics and extreme stresses involved, which makes it possible for maximum input authority for Mach 10 and beyond.

Paradigm Shift in Control Surface Methodologies, Increasing Control Authority (Internal Mechanical Applications)

To date, most control surfaces for hypersonic missile platforms still use fins, similar to lower speed conventional missiles, and some using ducted fins. This is mostly due to lack of comprehension of hypersonic velocities in their own favor. Instead, the body itself incorporates those control surfaces, greatly enhancing the airframe strength, opening up more space for hardware and fuel capacity; while simultaneously enhancing the platforms maneuvering capabilities.

A scramjet missile can then fly like conventional missile platforms, and not straight and level at high altitudes, losing velocity on it's decent trajectory to target. Another added benefit to this aspect, is the ability to extend range greatly, so if anyone elses hypersonic missile platform were developed for 400 mile range, falling out of the sky due to lack of glide capabilities; our platforms can easily reach 600+ miles, with minimal glide deceleration.

The Horrockses Cotton Fairies take you on a tour of the cotton manufacturing processes at three of their Preston Mills - Yard Works, Centenary / New Preston and Fishwick.

This was Horrockses - Crewdson's contribution to the 1920 trade publication Concerning Cotton - A brief account of the aims and achievements of the Amalgamated Cotton Mills Trust Limited and it's component companies.

TO ENLARGE - either:

1. Right-click the image then choose Original or...

2. Select View all sizes from the Actions tab then choose Original

"This site was the location of the Henry Wood's Sons paint factory from 1848 through 1928.

After emigrating from England, Henry Wood established a pigment grinding shop in Boston. He later moved to Wellesley Lower Falls, the center of the town's industry in the late 19th century, and in 1848 opened the factory on this site, which was then called Natick Brook. The factory produced tinted Portland cement used in building construction, artists' oil paint in tubes, and the pigment component of paint. At the height of the business' success (1897-1910), the factory was one of the larger regional producers of pigments, producing six tons per day, including its own formula, "Marseilles green." On this site were factory buildings, living quarters for the owner and employees, a 60,000 gallon water tank, and a railroad spur crossing Waban Brook on a two-arched stone bridge. Around the turn of the 20th century, changes in technology and marketing in the paint industry caused the business to suffer financial difficulties and finally close in 1928.

In 1932 Wellesley College purchased the property to preclude further industrial use of the site. The remaining stone and wooden buildings were demolished, leaving only foundations and the remains of the stone railroad bridge. These remains were left untouched until the 1980s when metal contaminants left by the pigment manufacturing process were discovered in the soil. Wellesley College then undertook the excavation of the soils, cleanup of the site, and restoration of the wetlands."

Photograph from a May 24, 2010 site visit to the Morses Pond Culvert site in Wellesley, Massachusetts.

MassDEP RTN: 3-0011653

Site summary information with link to available documents: public.dep.state.ma.us/SearchableSites/Site_Info.asp?textfield_...

BlueEdge - Mach 8-10 Hypersonic Commercial Aircraft, 220 Passenger Hypersonic Commercial Plane - Imaginactive Media Release ICAO

Courtesy of Imaginactive, ICAO, Charles Bombardier, and Martin Rico. Media Release of High Quality Renderings for mainstream media.

IO Aircraft: www.ioaircraft.com/hypersonic/blueedge.php

Imaginactive: imaginactive.org/2019/02/blue-edge/

Martin Rico, Industrial Graphics Designed: www.linkedin.com/in/mjrico/

Seating: 220 | Crew 2+4

Length: 195ft | Span: 93ft

Engines: 4 U-TBCC (Unified Turbine Based Combined Cycle) +1 Aerospike for sustained 2G acceleration to Mach 10.

Fuel: H2 (Compressed Hydrogen)

Cruising Altitude: 100,000-125,000ft

Airframe: 75% Proprietary Composites

Operating Costs, Similar to a 737. $7,000-$15,000hr, including averaged maintenence costs

Iteration 3 (Full release of IT3, Monday January 14, 2019)

IO Aircraft www.ioaircraft.com

Drew Blair www.linkedin.com/in/drew-b-25485312/

-----------------------------

hypersonic plane, hypersonic aircraft, Imaginactive, ICAO, International Civil Aviation Orginization, Charles Bombardier, Martin Rico, hypersonic commercial plane, hypersonic commercial aircraft, hypersonic airline, tbcc, glide breaker, fighter plane, hyperonic fighter, boeing phantom express, phantom works, boeing phantom works, lockheed skunk works, hypersonic weapon, hypersonic missile, scramjet missile, scramjet engineering, scramjet physics, boost glide, tactical glide vehicle, Boeing XS-1, htv, Air Launched Rapid Response Weapon, (ARRW), hypersonic tactical vehicle, space plane, scramjet, turbine based combined cycle, ramjet, dual mode ramjet, darpa, onr, navair, afrl, air force research lab, office of naval research, defense advanced research project agency, defense science, missile defense agency, aerospike, hydrogen, hydrogen storage, hydrogen fueled, hydrogen aircraft, virgin airlines, united airlines, sas, finnair ,emirates airlines, ANA, JAL, airlines, military, physics, airline, british airways, air france

-----------------------------

Unified Turbine Based Combined Cycle. Current technologies and what Lockheed is trying to force on the Dept of Defense, for that low speed Mach 5 plane DOD gave them $1 billion to build and would disintegrate above Mach 5, is TBCC. 2 separate propulsion systems in the same airframe, which requires TWICE the airframe space to use.

Unified Turbine Based Combined Cycle is 1 propulsion system cutting that airframe deficit in half, and also able to operate above Mach 10 up to Mach 15 in atmosphere, and a simple nozzle modification allows for outside atmosphere rocket mode, ie orbital capable.

Additionally, Reaction Engines maximum air breather mode is Mach 4.5, above that it will explode in flight from internal pressures are too high to operate. Thus, must switch to non air breather rocket mode to operate in atmosphere in hypersonic velocities. Which as a result, makes it not feasible for anything practical. It also takes an immense amount of fuel to function.

-------------

Advanced Additive Manufacturing for Hypersonic Aircraft

Utilizing new methods of fabrication and construction, make it possible to use additive manufacturing, dramatically reducing the time and costs of producing hypersonic platforms from missiles, aircraft, and space capable craft. Instead of aircraft being produced in piece, then bolted together; small platforms can be produced as a single unit and large platforms can be produces in large section and mated without bolting. These techniques include using exotic materials and advanced assembly processes, with an end result of streamlining the production costs and time for hypersonic aircraft; reducing months of assembly to weeks. Overall, this process greatly reduced the cost for producing hypersonic platforms. Even to such an extent that a Hellfire missile costs apx $100,000 but by utilizing our technologies, replacing it with a Mach 8-10 hypersonic missile of our physics/engineering and that missile would cost roughly $75,000 each delivered.

Materials used for these manufacturing processes are not disclosed, but overall, provides a foundation for extremely high stresses and thermodynamics, ideal for hypersonic platforms. This specific methodology and materials applications is many decades ahead of all known programs. Even to the extend of normalized space flight and re-entry, without concern of thermodynamic failure.

*Note, most entities that are experimenting with additive manufacturing for hypersonic aircraft, this makes it mainstream and standardized processes, which also applies for mass production.

What would normally be measured in years and perhaps a decade to go from drawing board to test flights, is reduced to singular months and ready for production within a year maximum.

Unified Turbine Based Combined Cycle (U-TBCC)

To date, the closest that NASA and industry have achieved for turbine based aircraft to fly at hypersonic velocities is by mounting a turbine into an aircraft and sharing the inlet with a scramjet or rocket based motor. Reaction Engines Sabre is not able to achieve hypersonic velocities and can only transition into a non air breathing rocket for beyond Mach 4.5

However, utilizing Unified Turbine Based Combine Cycle also known as U-TBCC, the two separate platforms are able to share a common inlet and the dual mode ramjet/scramjet is contained within the engine itself, which allows for a much smaller airframe footprint, thus engingeers are able to then design much higher performance aerial platforms for hypersonic flight, including the ability for constructing true single stage to orbit aircraft by utilizing a modification/version that allows for transition to outside atmosphere propulsion without any other propulsion platforms within the aircraft. By transitioning and developing aircraft to use Unified Turbine Based Combined Cycle, this propulsion system opens up new options to replace that airframe deficit for increased fuel capacity and/or payload.

Enhanced Dynamic Cavitation

Dramatically Increasing the efficiency of fuel air mixture for combustion processes at hypersonic velocities within scramjet propulsion platforms. The aspects of these processes are non disclosable.

Dynamic Scramjet Ignition Processes

For optimal scramjet ignition, a process known as Self Start is sought after, but in many cases if the platform becomes out of attitude, the scramjet will ignite. We have already solved this problem which as a result, a scramjet propulsion system can ignite at lower velocities, high velocities, at optimal attitude or not optimal attitude. It doesn't matter, it will ignite anyways at the proper point for maximum thrust capabilities at hypersonic velocities.

Hydrogen vs Kerosene Fuel Sources

Kerosene is an easy fuel to work with, and most western nations developing scramjet platforms use Kerosene for that fact. However, while kerosene has better thermal properties then Hydrogen, Hydrogen is a far superior fuel source in scramjet propulsion flight, do it having a much higher efficiency capability. Because of this aspect, in conjunction with our developments, it allows for a MUCH increased fuel to air mixture, combustion, thrust; and ability for higher speeds; instead of very low hypersonic velocities in the Mach 5-6 range. Instead, Mach 8-10 range, while we have begun developing hypersonic capabilities to exceed 15 in atmosphere within less then 5 years.

Conforming High Pressure Tank Technology for CNG and H2.

As most know in hypersonics, Hydrogen is a superior fuel source, but due to the storage abilities, can only be stored in cylinders thus much less fuel supply. Not anymore, we developed conforming high pressure storage technology for use in aerospace, automotive sectors, maritime, etc; which means any overall shape required for 8,000+ PSI CNG or Hydrogen. For hypersonic platforms, this means the ability to store a much larger volume of hydrogen vs cylinders.

As an example, X-43 flown by Nasa which flew at Mach 9.97. The fuel source was Hydrogen, which is extremely more volatile and combustible then kerosene (JP-7), via a cylinder in the main body. If it had used our technology, that entire section of the airframe would had been an 8,000 PSI H2 tank, which would had yielded 5-6 times the capacity. While the X-43 flew 11 seconds under power at Mach 9.97, at 6 times the fuel capacity would had yielded apx 66 seconds of fuel under power at Mach 9.97. If it had flew slower, around Mach 6, same principles applied would had yielded apx 500 seconds of fuel supply under power (slower speeds required less energy to maintain).

Enhanced Fuel Mixture During Shock Train Interaction

Normally, fuel injection is conducted at the correct insertion point within the shock train for maximum burn/combustion. Our methodologies differ, since almost half the fuel injection is conducted PRE shock train within the isolator, so at the point of isolator injection the fuel enhances the combustion process, which then requires less fuel injection to reach the same level of thrust capabilities.

Improved Bow Shock Interaction

Smoother interaction at hypersonic velocities and mitigating heat/stresses for beyond Mach 6 thermodynamics, which extraordinarily improves Type 3, 4, and 5 shock interaction.

6,000+ Fahrenheit Thermal Resistance

To date, the maximum thermal resistance was tested at AFRL in the spring of 2018, which resulted in a 3,200F thermal resistance for a short duration. This technology, allows for normalized hypersonic thermal resistance of 3,000-3,500F sustained, and up to 6,500F resistance for short endurance, ie 90 seconds or less. 10-20 minute resistance estimate approximately 4,500F +/- 200F.

*** This technology advancement also applies to Aerospike rocket engines, in which it is common for Aerospike's to exceed 4,500-5,000F temperatures, which results in the melting of the reversed bell housing. That melting no longer ocurrs, providing for stable combustion to ocurr for the entire flight envelope

Scramjet Propulsion Side Wall Cooling

With old technologies, side wall cooling is required for hypersonic flight and scramjet propulsion systems, otherwise the isolator and combustion regions of a scramjet would melt, even using advanced ablatives and ceramics, due to their inability to cope with very high temperatures. Using technology we have developed for very high thermodynamics and high stresses, side wall cooling is no longer required, thus removing that variable from the design process and focusing on improved ignition processes and increasing net thrust values.

Lower Threshold for Hypersonic Ignition

Active and adaptive flight dynamics, resulting in the ability for scramjet ignition at a much lower velocity, ie within ramjet envelope, between Mach 2-4, and seamless transition from supersonic to hypersonic flight, ie supersonic ramjet (scramjet). This active and dynamic aspect, has a wide variety of parameters for many flight dynamics, velocities, and altitudes; which means platforms no longer need to be engineered for specific altitude ranges or preset velocities, but those parameters can then be selected during launch configuration and are able to adapt actively in flight.

Dramatically Improved Maneuvering Capabilities at Hypersonic Velocities

Hypersonic vehicles, like their less technologically advanced brethren, use large actuator and the developers hope those controls surfaces do not disintegrate in flight. In reality, it is like rolling the dice, they may or may not survive, hence another reason why the attempt to keep velocities to Mach 6 or below. We have shrunken down control actuators while almost doubling torque and response capabilities specifically for hypersonic dynamics and extreme stresses involved, which makes it possible for maximum input authority for Mach 10 and beyond.

Paradigm Shift in Control Surface Methodologies, Increasing Control Authority (Internal Mechanical Applications)

To date, most control surfaces for hypersonic missile platforms still use fins, similar to lower speed conventional missiles, and some using ducted fins. This is mostly due to lack of comprehension of hypersonic velocities in their own favor. Instead, the body itself incorporates those control surfaces, greatly enhancing the airframe strength, opening up more space for hardware and fuel capacity; while simultaneously enhancing the platforms maneuvering capabilities.

A scramjet missile can then fly like conventional missile platforms, and not straight and level at high altitudes, losing velocity on it's decent trajectory to target. Another added benefit to this aspect, is the ability to extend range greatly, so if anyone elses hypersonic missile platform were developed for 400 mile range, falling out of the sky due to lack of glide capabilities; our platforms can easily reach 600+ miles, with minimal glide deceleration.

As part of the required course knowledge pupils need to be able to outline the process involved in taking a square wooden blank and preparing it for turning between centres. These pictures depict that process chronologically.

Stage 1 * Preparation of wooden blank. Cut to size. Sand square. Mark across diagonals. Centre punch the centre point. Use spring dividers to mark circumference. Repeat on other end.

Stage 2 * Plane off corners down to circumference line. This takes cross section from square to octagon. This reduces force on cutting toll in initial prep of blank. Mount between fork [driven] centre and dead [or live ] centre at tailstock end. Apply grease a dead centre end. apply force from tailstock end to force fork into material at driven end. Adjust toolstock height to suit. Check for clearance.

Stage 3 * Roughout using scraper to diameter. Use combination of gouges and skew chisels to add beads and other decorative detailing as required. Ensure spindle speed is appropriate for material and cross section under consideration. Obey all safety instructions.

Delivering sugar stone for use in the manufacturing process at the sugar beet factory in Bury St. Edmunds.

Scanned from a Fuji 100 transparency.

The Horrockses Cotton Fairies take you on a tour of the cotton manufacturing processes at three of their Preston Mills - Yard Works, Centenary / New Preston and Fishwick.

This was Horrockses - Crewdson's contribution to the 1920 trade publication Concerning Cotton - A brief account of the aims and achievements of the Amalgamated Cotton Mills Trust Limited and it's component companies.

TO ENLARGE - either:

1. Right-click the image then choose Original or...

2. Select View all sizes from the Actions tab then choose Original