View allAll Photos Tagged Latest_Technology
Latest Technology News is available at New Techno World website, by which give the all types of latest news.
HYPERFORGED HF-C7
Disk finish：Brushed side Polish
Rim outer finish：HighPolish
Rim inner finish：Anodized Black
F： 9.0J×20 SemiConcave
R：13.0J×21 DeepConcave
Pirelli P Zero
F：255/30/20 R：355/25/21
Lamborghini Aventador LP700-4
Auto Plaza Dank
Perfomance rest assured HYPERFORGED is utilizing the latest technology
and made entirely in the JAPAN． HYPER FORGED www.hyperforgedwheels.com
+++ DISCLAIMER +++
Nothing you see here is real, even though the conversion or the presented background story might be based historical facts. BEWARE!
Some background
A review by the Australian Government's Defense Committee held after World War II recommended that the post-war forces of the RAN be structured around a Task Force incorporating multiple aircraft carriers. Initial plans were for three carriers, with two active and a third in reserve. A Fleet Air Arm was established on 3 July 1947 by the Commonwealth Defense Council to operate aircraft from these. The first, HMAS Sydney, entered service in 1948.
Sydney was the only non-US, non-UK aircraft carrier to be involved in the Korean War. Sydney's maiden voyage saw the delivery of the first two squadrons operated by the Fleet Air Arm: 805 Squadron with Hawker Sea Furies, and 816 Squadron with Fairey Fireflies. The RAN's second aircraft carrier, HMAS Melbourne, had encountered delays while upgrading to the latest technology, and the British aircraft carrier HMS Vengeance was loaned to the RAN from 1952 until 1955, when Melbourne was commissioned.
At this stage it was clear that the RAN needed some more aerial punch for its new carriers beyond its fast Sea Furies and outdated Fireflies. Hence, search began for a complementary fighter bomber. The Douglas A-1 Skyraider was an initial candidate, but it finally was rejected because it appeared to be too slow and limited to the CAS role. The Westland Wyvern was another candidate, but considered to be too complex and large. Despite the advent of the jet age, a rather simple and robust aircraft with a piston engine was demanded as a ground-attack version for low altitudes. In early 1949, a proven candidate was found: Vought's F4U-5 Corsair, even though in a much modified version.
The Corsair was quickly adopted, since time was pressing. But despite the urgency through the Commonwealth Defense Council, the RAN Corsair would considerably differ from its American counterparts: The RAN decided to replace the original Pratt & Whitney R-2800 radial engine with a Rolls Royce Griffon engine. A major change, but the Griffon offered better fuel efficiency and saved overall weight, despite the prominent water radiator bath under the propeller.
The longer nose section earned the Australian Corsairs the nickname ‘Longneck’, inspired by typical 750ml bottles of beer in South Australia. These aircraft could also be easily identified through a massive, four-bladed contraprop with a long, pointed spinner. Major benefit of the contraprop was a much improved low speed handling through reduced torque effects and enhanced throttle response - a vital feature on the relatively small Australian carriers' flight decks. This new arrangement changed the Corsair's silhouette completely, but also improved aerodynamics, so that, despite a nominal decrease in power, almost all performance features could be kept.
Other obvious external modifications were an enlarged fin with a square shape for better directional stability at low speeds and the introduction of an almost frameless perspex bubble canopy - reminiscent of Goodyear's F2G "Super Corsair" from late WWII and improving both aerodynamics as well as the rearward field of view. Less visible were many British standard equipment pieces, like the Hispano Mk. V cannons, the radio or the electric system. Effectively, almost no part of the Australian Corsairs would be interchangeable with its US cousins!
The aircraft were to be assembled in Australia at the Port Melbourne plant of CAC. Raw airframe kits were imported from the USA via ship, as well as the Australian Corsairs' engines, which came directly from Great Britain. A total of 34 ‘Longnecks’ were built from these imported kits. The new aircraft were ready for service in October 1950 and received the official designation ‘Corsair S.1’, All machines were exclusively allocated to 806 Squadron, which was initially based on HMAS Sydney.
RAN Corsairs quickly saw hot action, when HMAS Sydney was deployed to Korean waters in late 1951, with a wartime CAG of 805, 806, 808, and 817 Squadrons embarked. The CAG conducted its first raids on 5 October 1951 with 32 sorties mounted in the 'Wales' area in the south-west of North Korea. Six days later, Sydney's CAG flew a light fleet carrier record to date of 89 sorties in one day conducting attacking raids and targeting sorties for USS New Jersey. The Fleet Air Arm operated in a strike, ground support, and escort role during the deployment, which saw three RAN pilots killed and a fourth seriously wounded, while a total of fifteen aircraft were lost, including two Corsair S.1.
After just three years of service, starting in 1953 towards the end of the Korea crisis, all RAN Corsairs saw a major equipment update, including an AN/APS-4 radar which was added in a housing under the starboard wing. This simple radar could be used for radar navigation, radar beacon homing and radar bombing, as well as airborne target search, so that the Corsairs could even be employed as night fighters. The modified machines were re-designated SAW.1 ("Strike - All Weather").
All RAN Corsairs served exclusively with 806 Squadron alongside Hawker Sea Furies and later De Havilland See Venom all-weather fighters. After the Korean War the squadron was quickly relocated to HMAS Melbourne when HMAS Sydney was to be decommissioned in the late 50ies. The robust machines were withdrawn from carrier use in 1965 but remained in land-based service at Nowra Air Station until 1968, when the squadron was disbanded and the last machines retired. They were effectively replaced by A-4 Skyhawks.
General characteristics
• Crew: 1 pilot
• Length: 37 ft (11.09 m)
• Wingspan: 41 ft 0 in (12.5 m)
• Height: 17 ft 1 1/2 in (5.11 m)
• Empty weight: 9,205 lb (4,174 kg)
• Loaded weight: 14,670 lb (6,653 kg)
Powerplant:
• 1 × water-cooled V12 Rolls Royce Griffon RG.25.SM engine with 2.625 hp (1.955 kW)
Performance
• Maximum speed: 426 mph (350 kn, 688 km/h)
• Range: 900 mi (783 nmi, 1,450 km)
• Service ceiling: 41.500ft (12.649 m)
• Rate of climb: 3,870ft/min (19.7 m/s)
Armament:
4 × 20 mm (.79 in) Hispano Mk V cannons
4.000 pounds (1.800 kg) of external ordnance, including drop tanks, iron bombs of up to 1.000 lbs. calibre or up to 16× 3" (76.2 mm) rockets
The kit and its assembly:
Another whiffy 'science fiction' model. I found the idea of an après-WWII-Corsair in Commonwealth use interesting, since the type had a very long and successful career, and the 2012 “Aussierama” group build at whatifmodelers.com fuelled this project further.
Neither a RAN Corsair ever existed, nor a V12 engine variant, though. My initial idea was a Corsair with a Centaurus engine and a five-bladed propeller. But this is a rather common whif conversion, you find a lot of these – easy to do and it looks great, too. But I wanted "something more".
An early concept element was the bubble canopy with the lowered rear fuselage, but the Griffon entered the scene relatively late, just when I found a resin conversion set from Red Roo Models of Australia with RAAF Avro Lincoln engine nacelles. That engine would make the difference I had been looking for – and it was furthermore a nice ‘excuse’ for fitting a massive contraprop… ;)
The basis kit for this conversion is a French F4U-7 from Italeri. It is a very good kit which is still around in several permutations and re-boxings, e .g. from Revell o. G.. Wings, horizontal stabilizers and landing gear were taken OOB, but the fuselage saw heavy modification:
a) The resin Griffon from Red Roo was implanted just in front of the wing's leading edge. The fuselage was simply cut off and the former exhaust niches filled with putty. Easier than expected, even though tedious and time-consuming!
The Red Roo engines come without any props, so that the propeller is a donation part: it comes from a vintage Plasticart Tu-20/95 bomber in 1:100 scale. The blade tips were clipped for a modern look, matching the diameter of the original F4U propeller. Ground clearance would not be a problem, since the propeller sits higher on the fuselage than with the original radial engine.
b) The original round fin was completely replaced by a new horizontal stabilizer. This piece is the outer section of a vintage 1:100 scale An-12(!), also from Plasticart. As a side note: this donation part is probably 35 years old, but here it finally found a new and good use! It is a simple but very effective change – with the new fin the converted Corsair now looks a little like a Blackburn Firebrand or later Firecrest?
c) The complete upper fuselage was replaced by a lower, scratch-built/hand-welded polystyrene piece. It received a new cockpit opening and a scratch-built fairing for the new bubble canopy. The latter comes from a Hasegawa Vought XF5U-1 (the 'Flying Pancake') and makes the Corsair look pretty fast and streamlined. A pilot (Italeri?) was added to the cockpit, which was otherwise kept OOB since it is nicely detailed, just like the rest of the OOB kit.
I guess that only 50% of the original fuselage survived this major surgery! A wonder that the thing still holds together...
Further minor mods include the radar housing (leftover from another Italeri F4U kit), new guns in the wings and the unguided 3" missiles with launch rails instead of USN HVARs. They add IMHO much to the British look of the aircraft. The RPs come from a Matchbox Bristol Beaufighter, the racks, too, but the original, massive four-missile-pallets were separated into single launch rails, for a more delicate look.
The drop tank comes from the original kit, even though its centerline position is individual. The bomb hardpoints under the wing roots were retained, but left empty. You can IMHO easily ‘kill’ a whif plane with too much and/or too exotic ordnance, and there's already enough extra about this model to discover.
Painting and markings:
To make the plane a bit exotic (and for the aforementioned group build) I decided to build it in Australian Navy colors, with Kangaroo Roundels. Initially I wanted to place the RAN Corsair into the Korean War era, but at that time the Kangaroo roundels had not been in use yet (they were introduced in July 1956, after the war). On the downside of that time window, quick ID "invasion stripes" from the Korean War era would not be plausible anymore - and they'd only go together with RAF-style roundels, which I did not want to use since I wanted a clear identification of the Corsair's (fictional) user. Therefore, the model was placed in the late 50ies.
I kept the Corsair in typical RAN colors of that era, though. Sea Furies and Gannets were benchmarks, not only for the paint scheme but also for the markings/decals. Basic colors are Extra Dark Sea Grey (Humbrol 123) from above and Sky Type S (Testors 2049) from below, with a high waterline and with EDSG wrapped around the leading edges – a detail I copied from RAN Gannets.
As a little design twist I tried to make some areas look as if Korean War ID stripes on wings and fuselage had recently been painted over - and approprtaiet detail for 1957, and just after the RAAF/RAN introduced the Kangaroo Roundels. Therefore, upper sides of wings and fuselage were painted with Testors 2079 (RLM 66) and Humbrol 90 (Beige Green, actually Sky Type S, too, but with a kore yellow-ish hue than the Testors paint). I think it worked well, and makes the simple two-tone livery a bit more attractive?
Cockpit interior was painted in RAF Cockpit Green (Humbrol 78), the landing gear as well as its wells were left in aluminum (Humbrol 56).
The kit was only slightly weathered, with a very thin black ink wash, some dry painting with lighter shades of the basic tones in order to emphasize panel lines, and even less dry painting with silver on leading edges.
Additionally, some light exhaust and gun soot stains were added, simple dry painting with matt black and some dark grey.
The decals were puzzled together from several Xtracedal aftermarket sheets (for Fairey Gannets and Hawker Sea Furys) and the scrap box. In order to add a colorful contrast I decided to add some bold squadron colors on fin and spinner, since I have seen similar markings on RAN Gannets of that time. I went for black and yellow, as complementary colors to the red/white/blue roundels. The checkered rudder was cut from an aftermarket sheet for small-scale tabletop vehicles. The spinner was painted by hand.
Finally, everything was sealed under stain varnish (Tamiya), and a slightly sprayed some matt varnish onto the upper front areas, so that the paint looks a bit dull and worn without sacrificing the sheen look.
All in all, a major conversion with little problems – waiting for the resin parts from Australia to arrive was the biggest challenge. I think that the aircraft looks pretty plausible? A subtle whif. ^^
Technology is on the peek of advancement in everything today. Portability combined with performance is the driving force of the gadget market. Brands all around the world, are launching new devices with innovative designs, many android tablet under 5000 are also launched,latest technologies and best in class features to create a unique product for their consumers. One such comparison can be viewed here.
Today the Sheep Meadow is a 15-acre, lush, green meadow for relaxing and admiring one of New York City's greatest skyline views. But it began less placidly — at least in concept. One of the conditions for entries in the 1858 Central Park design competition was the inclusion of a parade ground for military drills. Olmsted and Vaux included the parade ground in their design only reluctantly. The Park Commissioners were soon won over to their point of view, however, agreeing that military use conflicted with the vision of a quiet and serene atmosphere.
The sheep and a shepherd were housed in a fanciful Victorian building — part of what is now the Tavern on the Green restaurant — on the western perimeter of the Park. The flock of pedigree Southdown (and later Dorset) sheep inhabited the meadow from 1864 until 1934, when the sheep were transferred to Prospect Park in Brooklyn and the sheepfold became a restaurant.
In the 1960s and the 1970s thousands of people were attracted to Sheep Meadow for large-scale concerts. The first landing on the moon was televised to a large crowd in the meadow on July 20, 1969. These events, and the lack of maintenance, severely eroded the lawn. Sheep Meadow was the first area in Central Park to be restored. It reopened in 1981 as a swath of green dedicated to sunbathers, picnickers, and kite flyers. In November 2000, the Conservancy began the installation of a new irrigation system whose design incorporated the latest technology. Quick-coupler valves for hand watering are located at strategic points; 3,000 feet of irrigation main and 15,000 feet of lateral pipe were also put in to support 300 sprinkler heads. The project was completed in 5 months, and Sheep Meadow reopened in April 2001.
On the northern edge of Sheep Meadow, just outside its fence, is Lilac Walk. Along the walk are 23 varieties of lilacs from around the world. The Center Drive, slightly further on, offers volleyball and the "skate circle" — the setting for serious roller-skating and disco skating.
Central Park was designated a scenic landmark by the New York City Landmarks Preservation Commission in 1974.
Central Park National Register #66000538
As part of Transdev's 2.3m investment of the Yorkshire Coastliner fleet at Malton. 10 new buses were ordered from Wrightbus in the shape of Wright Gemini 3's on a Volvo B5TL twin Turbo chassis.
These have been fitted with the latest technology simular to the 36;. As so they come with Free 4G WiFi, high spec seating and tables as standard. They also feature USB, mains and Wireless charging facilities as well as next stop information and Mobitecs & Countdown displays to show how long before departure time.
The last of the batch to enter Service, 3638 (BT66 MVX) Leaves Leeds Bus Station on its first day in service. Fellow Harrogate sister 3620 (BL65 YYT) following behind on a 36.
+++ DISCLAIMER +++
Nothing you see here is real, even though the conversion or the presented background story might be based historical facts. BEWARE!
Some background
A review by the Australian Government's Defense Committee held after World War II recommended that the post-war forces of the RAN be structured around a Task Force incorporating multiple aircraft carriers. Initial plans were for three carriers, with two active and a third in reserve. A Fleet Air Arm was established on 3 July 1947 by the Commonwealth Defense Council to operate aircraft from these. The first, HMAS Sydney, entered service in 1948.
Sydney was the only non-US, non-UK aircraft carrier to be involved in the Korean War. Sydney's maiden voyage saw the delivery of the first two squadrons operated by the Fleet Air Arm: 805 Squadron with Hawker Sea Furies, and 816 Squadron with Fairey Fireflies. The RAN's second aircraft carrier, HMAS Melbourne, had encountered delays while upgrading to the latest technology, and the British aircraft carrier HMS Vengeance was loaned to the RAN from 1952 until 1955, when Melbourne was commissioned.
At this stage it was clear that the RAN needed some more aerial punch for its new carriers beyond its fast Sea Furies and outdated Fireflies. Hence, search began for a complementary fighter bomber. The Douglas A-1 Skyraider was an initial candidate, but it finally was rejected because it appeared to be too slow and limited to the CAS role. The Westland Wyvern was another candidate, but considered to be too complex and large. Despite the advent of the jet age, a rather simple and robust aircraft with a piston engine was demanded as a ground-attack version for low altitudes. In early 1949, a proven candidate was found: Vought's F4U-5 Corsair, even though in a much modified version.
The Corsair was quickly adopted, since time was pressing. But despite the urgency through the Commonwealth Defense Council, the RAN Corsair would considerably differ from its American counterparts: The RAN decided to replace the original Pratt & Whitney R-2800 radial engine with a Rolls Royce Griffon engine. A major change, but the Griffon offered better fuel efficiency and saved overall weight, despite the prominent water radiator bath under the propeller.
The longer nose section earned the Australian Corsairs the nickname ‘Longneck’, inspired by typical 750ml bottles of beer in South Australia. These aircraft could also be easily identified through a massive, four-bladed contraprop with a long, pointed spinner. Major benefit of the contraprop was a much improved low speed handling through reduced torque effects and enhanced throttle response - a vital feature on the relatively small Australian carriers' flight decks. This new arrangement changed the Corsair's silhouette completely, but also improved aerodynamics, so that, despite a nominal decrease in power, almost all performance features could be kept.
Other obvious external modifications were an enlarged fin with a square shape for better directional stability at low speeds and the introduction of an almost frameless perspex bubble canopy - reminiscent of Goodyear's F2G "Super Corsair" from late WWII and improving both aerodynamics as well as the rearward field of view. Less visible were many British standard equipment pieces, like the Hispano Mk. V cannons, the radio or the electric system. Effectively, almost no part of the Australian Corsairs would be interchangeable with its US cousins!
The aircraft were to be assembled in Australia at the Port Melbourne plant of CAC. Raw airframe kits were imported from the USA via ship, as well as the Australian Corsairs' engines, which came directly from Great Britain. A total of 34 ‘Longnecks’ were built from these imported kits. The new aircraft were ready for service in October 1950 and received the official designation ‘Corsair S.1’, All machines were exclusively allocated to 806 Squadron, which was initially based on HMAS Sydney.
RAN Corsairs quickly saw hot action, when HMAS Sydney was deployed to Korean waters in late 1951, with a wartime CAG of 805, 806, 808, and 817 Squadrons embarked. The CAG conducted its first raids on 5 October 1951 with 32 sorties mounted in the 'Wales' area in the south-west of North Korea. Six days later, Sydney's CAG flew a light fleet carrier record to date of 89 sorties in one day conducting attacking raids and targeting sorties for USS New Jersey. The Fleet Air Arm operated in a strike, ground support, and escort role during the deployment, which saw three RAN pilots killed and a fourth seriously wounded, while a total of fifteen aircraft were lost, including two Corsair S.1.
After just three years of service, starting in 1953 towards the end of the Korea crisis, all RAN Corsairs saw a major equipment update, including an AN/APS-4 radar which was added in a housing under the starboard wing. This simple radar could be used for radar navigation, radar beacon homing and radar bombing, as well as airborne target search, so that the Corsairs could even be employed as night fighters. The modified machines were re-designated SAW.1 ("Strike - All Weather").
All RAN Corsairs served exclusively with 806 Squadron alongside Hawker Sea Furies and later De Havilland See Venom all-weather fighters. After the Korean War the squadron was quickly relocated to HMAS Melbourne when HMAS Sydney was to be decommissioned in the late 50ies. The robust machines were withdrawn from carrier use in 1965 but remained in land-based service at Nowra Air Station until 1968, when the squadron was disbanded and the last machines retired. They were effectively replaced by A-4 Skyhawks.
General characteristics
• Crew: 1 pilot
• Length: 37 ft (11.09 m)
• Wingspan: 41 ft 0 in (12.5 m)
• Height: 17 ft 1 1/2 in (5.11 m)
• Empty weight: 9,205 lb (4,174 kg)
• Loaded weight: 14,670 lb (6,653 kg)
Powerplant:
• 1 × water-cooled V12 Rolls Royce Griffon RG.25.SM engine with 2.625 hp (1.955 kW)
Performance
• Maximum speed: 426 mph (350 kn, 688 km/h)
• Range: 900 mi (783 nmi, 1,450 km)
• Service ceiling: 41.500ft (12.649 m)
• Rate of climb: 3,870ft/min (19.7 m/s)
Armament:
4 × 20 mm (.79 in) Hispano Mk V cannons
4.000 pounds (1.800 kg) of external ordnance, including drop tanks, iron bombs of up to 1.000 lbs. calibre or up to 16× 3" (76.2 mm) rockets
The kit and its assembly:
Another whiffy 'science fiction' model. I found the idea of an après-WWII-Corsair in Commonwealth use interesting, since the type had a very long and successful career, and the 2012 “Aussierama” group build at whatifmodelers.com fuelled this project further.
Neither a RAN Corsair ever existed, nor a V12 engine variant, though. My initial idea was a Corsair with a Centaurus engine and a five-bladed propeller. But this is a rather common whif conversion, you find a lot of these – easy to do and it looks great, too. But I wanted "something more".
An early concept element was the bubble canopy with the lowered rear fuselage, but the Griffon entered the scene relatively late, just when I found a resin conversion set from Red Roo Models of Australia with RAAF Avro Lincoln engine nacelles. That engine would make the difference I had been looking for – and it was furthermore a nice ‘excuse’ for fitting a massive contraprop… ;)
The basis kit for this conversion is a French F4U-7 from Italeri. It is a very good kit which is still around in several permutations and re-boxings, e .g. from Revell o. G.. Wings, horizontal stabilizers and landing gear were taken OOB, but the fuselage saw heavy modification:
a) The resin Griffon from Red Roo was implanted just in front of the wing's leading edge. The fuselage was simply cut off and the former exhaust niches filled with putty. Easier than expected, even though tedious and time-consuming!
The Red Roo engines come without any props, so that the propeller is a donation part: it comes from a vintage Plasticart Tu-20/95 bomber in 1:100 scale. The blade tips were clipped for a modern look, matching the diameter of the original F4U propeller. Ground clearance would not be a problem, since the propeller sits higher on the fuselage than with the original radial engine.
b) The original round fin was completely replaced by a new horizontal stabilizer. This piece is the outer section of a vintage 1:100 scale An-12(!), also from Plasticart. As a side note: this donation part is probably 35 years old, but here it finally found a new and good use! It is a simple but very effective change – with the new fin the converted Corsair now looks a little like a Blackburn Firebrand or later Firecrest?
c) The complete upper fuselage was replaced by a lower, scratch-built/hand-welded polystyrene piece. It received a new cockpit opening and a scratch-built fairing for the new bubble canopy. The latter comes from a Hasegawa Vought XF5U-1 (the 'Flying Pancake') and makes the Corsair look pretty fast and streamlined. A pilot (Italeri?) was added to the cockpit, which was otherwise kept OOB since it is nicely detailed, just like the rest of the OOB kit.
I guess that only 50% of the original fuselage survived this major surgery! A wonder that the thing still holds together...
Further minor mods include the radar housing (leftover from another Italeri F4U kit), new guns in the wings and the unguided 3" missiles with launch rails instead of USN HVARs. They add IMHO much to the British look of the aircraft. The RPs come from a Matchbox Bristol Beaufighter, the racks, too, but the original, massive four-missile-pallets were separated into single launch rails, for a more delicate look.
The drop tank comes from the original kit, even though its centerline position is individual. The bomb hardpoints under the wing roots were retained, but left empty. You can IMHO easily ‘kill’ a whif plane with too much and/or too exotic ordnance, and there's already enough extra about this model to discover.
Painting and markings:
To make the plane a bit exotic (and for the aforementioned group build) I decided to build it in Australian Navy colors, with Kangaroo Roundels. Initially I wanted to place the RAN Corsair into the Korean War era, but at that time the Kangaroo roundels had not been in use yet (they were introduced in July 1956, after the war). On the downside of that time window, quick ID "invasion stripes" from the Korean War era would not be plausible anymore - and they'd only go together with RAF-style roundels, which I did not want to use since I wanted a clear identification of the Corsair's (fictional) user. Therefore, the model was placed in the late 50ies.
I kept the Corsair in typical RAN colors of that era, though. Sea Furies and Gannets were benchmarks, not only for the paint scheme but also for the markings/decals. Basic colors are Extra Dark Sea Grey (Humbrol 123) from above and Sky Type S (Testors 2049) from below, with a high waterline and with EDSG wrapped around the leading edges – a detail I copied from RAN Gannets.
As a little design twist I tried to make some areas look as if Korean War ID stripes on wings and fuselage had recently been painted over - and approprtaiet detail for 1957, and just after the RAAF/RAN introduced the Kangaroo Roundels. Therefore, upper sides of wings and fuselage were painted with Testors 2079 (RLM 66) and Humbrol 90 (Beige Green, actually Sky Type S, too, but with a kore yellow-ish hue than the Testors paint). I think it worked well, and makes the simple two-tone livery a bit more attractive?
Cockpit interior was painted in RAF Cockpit Green (Humbrol 78), the landing gear as well as its wells were left in aluminum (Humbrol 56).
The kit was only slightly weathered, with a very thin black ink wash, some dry painting with lighter shades of the basic tones in order to emphasize panel lines, and even less dry painting with silver on leading edges.
Additionally, some light exhaust and gun soot stains were added, simple dry painting with matt black and some dark grey.
The decals were puzzled together from several Xtracedal aftermarket sheets (for Fairey Gannets and Hawker Sea Furys) and the scrap box. In order to add a colorful contrast I decided to add some bold squadron colors on fin and spinner, since I have seen similar markings on RAN Gannets of that time. I went for black and yellow, as complementary colors to the red/white/blue roundels. The checkered rudder was cut from an aftermarket sheet for small-scale tabletop vehicles. The spinner was painted by hand.
Finally, everything was sealed under stain varnish (Tamiya), and a slightly sprayed some matt varnish onto the upper front areas, so that the paint looks a bit dull and worn without sacrificing the sheen look.
All in all, a major conversion with little problems – waiting for the resin parts from Australia to arrive was the biggest challenge. I think that the aircraft looks pretty plausible? A subtle whif. ^^
Ducati, the most prominent name in the adventurous bike world, has once again planned to shake the Indian bike market with its most awaited, Ducati Diavel. The bike's first discloser took place at Milan, the international bike show. The company is to provide its new bike with elegant and sophisticated looks being equipped with latest technologies. The new cruiser bike from the company is to possess monstrous looks with aerodynamic graphics. The name of the new cruiser originates from the word “devil” of which the pronunciation is kept as “Dee-ah-vel”, that means “Evil, like the Devil”.
Biblioteca Nationala a Romaniei, inaugurata in 2012, are peste 11 milioane de carti, este dotata cu tehnologie de ultima ora, iar conform cifrelor este si in top 10 cele mai mari biblioteci ale lumii.
,,National Library of Romania, inaugurated in 2012, has over 11 million books, is equipped with the latest technology and according to the figures is the top 10 largest libraries in the world.,,
LAKELAND, Fla. – Florida Polytechnic University’s iconic Innovation, Science and Technology (IST) Building in Lakeland now ranks as one of the 16 “most breathtaking” buildings in the world, according to a survey of architects, placing it alongside iconic structures such as the Parthenon in Greece, the Empire State Building and Frank Lloyd Wright’s “Fallingwater” residence.
Business Insider’s “Tech Insider” magazine surveyed 16 prominent architects, asking each to pick just one structure they fondly think of as “breathtaking.” Architect Marica McKeel of Studio MM worked on the IST Building design and said, “Not only do I love the design of the Innovation, Science and Technology Building, but I feel a real connection to this project and to the Lakeland community as my father grew up in Lakeland and I still frequently visit family there.”
Designed by internationally-renowned architect Dr. Santiago Calatrava, the IST Building is the cornerstone of Florida Poly’s campus and the University’s main classroom and laboratory building. The 162,000-square-foot, white-domed building is a moveable and functional work of art, with a louvered roof system that adjusts with the sun’s angle, surrounded by a ring of curved metal pergolas that shade its outer terrace and walkways.
Calatrava repeatedly breaks new ground in architecture, with soaring designs for a new transit station at the rebuilt World Trade Center, a spiraling “Turning Torso” skyscraper in Sweden and the Peace Bridge in Calgary. Among the numerous awards associated with the IST Building is the distinguished Engineering News Record’s (ENR) Global Project of the Year award.
“The IST Building was created to provide an inspiring, modern atmosphere for learning, collaboration and innovation,” said Florida Poly President Dr. Randy K. Avent. “It’s invigorating to walk into this building each day and work alongside faculty, students and staff in one of the world’s most advanced structures.”
The IST Building houses 26 classrooms, the Aula Magna auditorium, faculty and administrative offices, an 11,000-square-foot Commons area and 11 innovation labs – including a 3D printing lab, cyber security lab and heath informatics lab – where students are able to get hands-on experience with the latest technology. Skanska USA was the lead contractor.
Other top accolades earned by the IST Building include:
2014 Engineering News Record Global Best Project by Engineering News Record
Best Projects: 2014 Project of the Year – Southeast Region, Best Higher Education/Research by Engineering News Record
2014 Metal Construction News Design Award in Metal Building Systems
2014 Best Innovative Structural Steel Project of the Year by the American Institute of Steel Construction
2015 Innovative Design in Engineering and Architecture with Structural Steel (IDEAS2) Award
2015 International Architecture Award by The Chicago Athenaeum: Museum of Architecture and Design and The European Centre for Architecture
Data above originated from the following website:
floridapolytechnic.org/news-item/florida-polys-ist-buildi...
HYPERFORGED HF-C7
Disk finish：Brushed side Polish
Rim outer finish：HighPolish
Rim inner finish：Anodized Black
F： 9.0J×20 SemiConcave
R：13.0J×21 DeepConcave
Pirelli P Zero
F：255/30/20 R：355/25/21
Lamborghini Aventador LP700-4
Auto Plaza Dank
Perfomance rest assured HYPERFORGED is utilizing the latest technology
and made entirely in the JAPAN． HYPER FORGED www.hyperforgedwheels.com
© 2009. Todos los Derechos Reservados
Vídeo en vivo
Serie - Foto
“ Santa Tecla 2009 “ Fiestas populares de Tarragona.
última tecnologia desde Japón...
Serie - Photo
“ Santa Tecla 2009 “ Festival of Tarragona – Spain.
Latest technology from Japan ...
HYPERFORGED HF-C7
Disk finish：Brushed side Polish
Rim outer finish：HighPolish
Rim inner finish：Anodized Black
F： 9.0J×20 SemiConcave
R：13.0J×21 DeepConcave
Pirelli P Zero
F：255/30/20 R：355/25/21
Lamborghini Aventador LP700-4
Auto Plaza Dank
Perfomance rest assured HYPERFORGED is utilizing the latest technology
and made entirely in the JAPAN． HYPER FORGED www.hyperforgedwheels.com
Wednesday's 6C46 Sellafield - Kingmoor passes beneath the chalets on the approach to Nethertown station behind the latest technology, to wit; 88006 & 88005.
HYPERFORGED HF-C7
Disk finish：Brushed side Polish
Rim outer finish：HighPolish
Rim inner finish：Anodized Black
F： 9.0J×20 SemiConcave
R：13.0J×21 DeepConcave
Pirelli P Zero
F：255/30/20 R：355/25/21
Lamborghini Aventador LP700-4
Auto Plaza Dank
Perfomance rest assured HYPERFORGED is utilizing the latest technology
and made entirely in the JAPAN． HYPER FORGED www.hyperforgedwheels.com
Meet one of Manchester's of newest recruits. Andrew Halliwel, who was formerly a GMP apprentice,and becomes a PC next month.
The first recruits to join GMP in five years are finishing their training by visiting their new patches.
In a few weeks’ time 100 new officers will be attested at a ceremony in Salford before becoming fully operational officers within neighbourhood policing teams across Greater Manchester.
The new recruits are being officially introduced to the areas that they will be policing, getting to know the local area, meeting community groups and attending briefings to learn from officers who already work there.
The 100 are all former GMP employees having previously been either Police Community Support Officers (PCSO), Special Constables, apprentices or police staff.
Deputy Chief Constable Ian Pilling, said: “The introduction of these 100 new officers is part of our commitment to neighbourhood policing across Greater Manchester.
“Many of these recruits will be building upon their experience as former PCSOs or Special Constables and will therefore already have established the skills necessary to succeed in neighbourhood policing.
“The recruits join GMP as we make full use of the latest technology, including smartphones and tablets, which will allow frontline officers to spend more time out policing in the community.
“Through the ongoing recruitment we continue with our commitment to make sure that Greater Manchester Police is representative of the people and communities in which we serve.”
Greater Manchester Mayor and Police and Crime Commissioner Tony Lloyd said: “For the first time in five years we will see a significant number of new police officers patrolling our streets, which is good news for the communities of Greater Manchester.
“Local people have told me that they want a strong and sustainable police service keeping them and their homes safe. Despite ongoing government cuts to policing, I am determined to deliver that, working with the Chief Constable to drive forward new recruitment to bolster local policing.“
500 new officers will join the Force this year but the total number of overall officers will be maintained at current levels.
To find out more about Greater Manchester Police www.gmp.police.uk
You should call 101, the national non-emergency number, to report crime and other concerns that do not require an emergency response.
Always call 999 in an emergency, such as when a crime is in progress, violence is being used or threatened or where there is danger to life.
You can also call anonymously with information about crime to Crimestoppers on 0800 555 111. Crimestoppers is an independent charity who will not want your name, just your information. Your call will not be traced or recorded and you do not have to go to court or give a statement.
IAA 2015
66. Internationale Automobilausstellung in Frankfurt
66. International Motor Show in Frankfurt
Founded about the year 900, stands the church of St Alkmund which celebrated its 1100th anniversary in 2012.
St Alkmund’s Church stands at the highest point in the town of Shrewsbury. It is known that there was a Saxon market called the King’s Market at the heart of Shrewsbury all round the church of St Alkmund. Nothing visible remains of the church that Aethelfleda founded. What we see today is part mediaeval and part Georgian. The tower and spire (56 metres high) was built about 1475 in the Perpendicular style. It forms one of the five notable buildings that make the skyline of Shrewsbury so unforgettably interesting. The poet A.E.Housman immortalised this view in his words: “High the vanes of Shrewsbury gleam islanded in Severn stream”.
Following the collapse of a neighbouring church (old St Chad’s) in 1788 the congregation of St Alkmund’s became concerned that their church might also collapse. Whether this was truly the case or not, the decision was taken to demolish the old mediaeval church except for the tower and spire, and a local architect, John Carline, was commissioned to build a new church in the Gothic Revival style.
Had his work remained intact, St Alkmund’s would have been one of the best examples of this style in England. Carline built a wonderfully light church with twelve identical windows made with the latest technology of the period. They had frames made of cast iron at Coalbrookdale – about fifteen miles from Shrewsbury. Superbly crafted in sections, and filled with clear glass, three of these magnificent windows have survived and have recently been completely repaired. They are contemporary (1795) with the great house at Fonthill that William Beckford was building for himself in the same style, and would held their own in that famous creation. Fonthill collapsed with thirty years, but St Alkmund’s still stands, although nine of the twelve windows were altered in the late 19th century, when ideas about what was correct architecture for a church differed from those of the Georgian period.
The east window is the great treasure of St Alkmund’s. It is indeed a notable survival of the work of Francis Eginton, famed in his time as an enamel painter on glass. Living in Handsworth, Birmingham, where he had for a time been a partner of Matthew Boulton, Eginton received a commission to paint a window for the new church of St Alkmund in 1794. He was allowed £150 for the work, and immediately stated that he could not do anything remarkable for that sum, but that the budget could be increased to £200 he could do something notable. The churchwardens agreed. £200 was a considerable sum of money in those days.
Eginton happened to have acquired an engraving of a painting of the Assumption of the Virgin by Guido Reni (1642), then in a collection in Mannheim in Germany. It is now in the Alte Pinakothek in Munich. He copied the figure of the Virgin, changing the colopurs, and brilliantly changed to surroundings of the figure to create an image of Christian pilgrimage. The cost came out at 210 guineas – that is, £20.10.0 over budget! That was more than a maid in domestic service would have been paid in a year. However, the churchwardens were so pleased with what Eginton had produced that they paid up on the nail and caused a letter of thanks to be sent to him. The window was installed in October 1795 and has survived, although much of Eginton’s work suffered from changes in taste in the 19th century and was removed or lost.
+++ DISCLAIMER +++
Nothing you see here is real, even though the conversion or the presented background story might be based on historical facts. BEWARE!
Some background:
The CAC Sabre, sometimes known as the Avon Sabre or CA-27, was an Australian variant of the North American Aviation F-86F Sabre fighter aircraft. In 1951, Commonwealth Aircraft Corporation obtained a license agreement to build the F-86F Sabre. In a major departure from the North American blueprint, it was decided that the CA-27 would be powered by a license-built version of the Rolls-Royce Avon R.A.7, rather than the General Electric J47. In theory, the Avon was capable of more than double the maximum thrust and double the thrust-to-weight ratio of the US engine. This necessitated a re-design of the fuselage, as the Avon was shorter, wider and lighter than the J47.
To accommodate the Avon, over 60 percent of the fuselage was altered and there was a 25 percent increase in the size of the air intake. Another major revision was in replacing the F-86F's six machine guns with two 30mm ADEN cannon, while other changes were also made to the cockpit and to provide an increased fuel capacity.
The prototype aircraft first flew on 3 August 1953. The production aircrafts' first deliveries to the Royal Australian Air Force began in 1954. The first batch of aircraft were powered by the Avon 20 engine and were designated the Sabre Mk 30. Between 1957 and 1958 this batch had the wing slats removed and were re-designated Sabre Mk 31. These Sabres were supplemented by 20 new-built aircraft. The last batch of aircraft were designated Sabre Mk 32 and used the Avon 26 engine, of which 69 were built up to 1961.
Beyond these land-based versions, an indigenous version for carrier operations had been developed and built in small numbers, too, the Sea Sabre Mk 40 and 41. The roots of this aircraft, which was rather a prestigious idea than a sensible project, could be traced back to the immediate post WWII era. A review by the Australian Government's Defence Committee recommended that the post-war forces of the RAN be structured around a Task Force incorporating multiple aircraft carriers. Initial plans were for three carriers, with two active and a third in reserve, although funding cuts led to the purchase of only two carriers in June 1947: Majestic and sister ship HMS Terrible, for the combined cost of AU£2.75 million, plus stores, fuel, and ammunition. As Terrible was the closer of the two ships to completion, she was finished without modification, and was commissioned into the RAN on 16 December 1948 as HMAS Sydney. Work progressed on Majestic at a slower rate, as she was upgraded with the latest technology and equipment. To cover Majestic's absence, the Colossus-class carrier HMS Vengeance was loaned to the RAN from 13 November 1952 until 12 August 1955.
Labour difficulties, late delivery of equipment, additional requirements for Australian operations, and the prioritization of merchant ships over naval construction delayed the completion of Majestic. Incorporation of new systems and enhancements caused the cost of the RAN carrier acquisition program to increase to AU£8.3 million. Construction and fitting out did not finish until October 1955. As the carrier neared completion, a commissioning crew was formed in Australia and first used to return Vengeance to the United Kingdom.
The completed carrier was commissioned into the RAN as HMAS Majestic on 26 October 1955, but only two days later, the ship was renamed Melbourne and recommissioned.
In the meantime, the rather political decision had been made to equip Melbourne with an indigenous jet-powered aircraft, replacing the piston-driven Hawker Fury that had been successfully operated from HMAS Sydney and HMAS Vengeance, so that the "new jet age" was even more recognizable. The choice fell on the CAC Sabre, certainly inspired by North American's successful contemporary development of the navalized FJ-2 Fury from the land-based F-86 Sabre. The CAC 27 was already a proven design, and with its more powerful Avon engine it even offered a better suitability for carrier operations than the FJ-2 with its rather weak J47 engine.
Work on this project, which was initially simply designated Sabre Mk 40, started in 1954, just when the first CAC 27's were delivered to operative RAAF units. While the navalized Avon Sabre differed outwardly only little from its land-based brethren, many details were changed and locally developed. Therefore, there was also, beyond the general outlines, little in common with the North American FJ-2 an -3 Fury.
Externally, a completely new wing with a folding mechanism was fitted. It was based on the F-86's so-called "6-3" wing, with a leading edge that was extended 6 inches at the root and 3 inches at the tip. This modification enhanced maneuverability at the expense of a small increase in landing speed due to deletion of the leading edge slats, a detail that was later introduced on the Sabre Mk 31, too. As a side benefit, the new wing leading edges without the slat mechanisms held extra fuel. However, the Mk 40's wing was different as camber was applied to the underside of the leading edge to improve low-speed handling for carrier operations. The wings were provided with four stations outboard of the landing gear wells for up to 1000 lb external loads on the inboard stations and 500 lb on the outboard stations.
Slightly larger stabilizers were fitted and the landing gear was strengthened, including a longer front wheel strut. The latter necessitated an enlarged front wheel well, so that the front leg’s attachment point had to be moved forward. A ventral launch cable hook was added under the wing roots and an external massive arrester hook under the rear fuselage.
Internally, systems were protected against salt and humidity and a Rolls-Royce Avon 211 turbojet was fitted, a downrated variant of the already navalized Avon 208 from the British DH Sea Vixen, but adapted to the different CAC 27 airframe and delivering 8.000 lbf (35.5 kN) thrust – slightly more than the engines of the land-based CAC Sabres, but also without an afterburner.
A single Mk 40 prototype was built from a new CAC 27 airframe taken directly from the production line in early 1955 and made its maiden flight on August 20th of the same year. In order to reflect its naval nature and its ancestry, this new CAC 27 variant was officially christened “Sea Sabre”.
Even though the modified machine handled well, and the new, cambered wing proved to be effective, many minor technical flaws were discovered and delayed the aircraft's development until 1957. These included the wing folding mechanism and the respective fuel plumbing connections, the landing gear, which had to be beefed up even more for hard carrier landings and the airframe’s structural strength for catapult launches, esp. around the ventral launch hook.
In the meantime, work on the land-based CAC 27 progressed in parallel, too, and innovations that led to the Mk 31 and 32 were also incorporated into the naval Mk 40, leading to the Sea Sabre Mk 41, which became the effective production aircraft. These updates included, among others, a detachable (but fixed) refueling probe under the starboard wing, two more pylons for light loads located under the wing roots and the capability to carry and deploy IR-guided AIM-9 Sidewinder air-to-air missiles, what significantly increased the Mk 41's efficiency as day fighter. With all these constant changes it took until April 1958 that the Sabre Mk 41, after a second prototype had been directly built to the new standard, was finally approved and cleared for production. Upon delivery, the RAN Sea Sabres carried a standard NATO paint scheme with Extra Dark Sea Grey upper surfaces and Sky undersides.
In the meantime, the political enthusiasm concerning the Australian carrier fleet had waned, so that only twenty-two aircraft were ordered. The reason behind this decision was that Australia’s carrier fleet and its capacity had become severely reduced: Following the first decommissioning of HMAS Sydney in 1958, Melbourne became the only aircraft carrier in Australian service, and she was unavailable to provide air cover for the RAN for up to four months in every year; this time was required for refits, refueling, personnel leave, and non-carrier duties, such as the transportation of troops or aircraft. Although one of the largest ships to serve in the RAN, Melbourne was one of the smallest carriers to operate in the post-World War II period, so that its contribution to military actions was rather limited. To make matters worse, a decision was made in 1959 to restrict Melbourne's role to helicopter operations only, rendering any carrier-based aircraft in Australian service obsolete. However, this decision was reversed shortly before its planned 1963 implementation, but Australia’s fleet of carrier-borne fixed-wing aircraft would not grow to proportions envisioned 10 years ago.
Nevertheless, on 10 November 1964, an AU£212 million increase in defense spending included the purchase of new aircraft for Melbourne. The RAN planned to acquire 14 Grumman S-2E Tracker anti-submarine aircraft and to modernize Melbourne to operate these. The acquisition of 18 new fighter-bombers was suggested (either Sea Sabre Mk 41s or the American Douglas A-4 Skyhawk), too, but these were dropped from the initial plan. A separate proposal to order 10 A-4G Skyhawks, a variant of the Skyhawk designed specifically for the RAN and optimized for air defense, was approved in 1965, but the new aircraft did not fly from Melbourne until the conclusion of her refit in 1969. This move, however, precluded the production of any new and further Sea Sabre.
At that time, the RAN Sea Sabres received a new livery in US Navy style, with upper surfaces in Light Gull Gray with white undersides. The CAC Sea Sabres remained the main day fighter and attack aircraft for the RAN, after the vintage Sea Furies had been retired in 1962. The other contemporary RAN fighter type in service, the Sea Venom FAW.53 all-weather fighter that had replaced the Furies, already showed its obsolescence.
In 1969, the RAN purchased another ten A-4G Skyhawks, primarily in order to replace the Sea Venoms on the carriers, instead of the proposed seventh and eighth Oberon-class submarines. These were operated together with the Sea Sabres in mixed units on board of Melbourne and from land bases, e.g. from NAS Nowra in New South Wales, where a number of Sea Sabres were also allocated to 724 Squadron for operational training.
Around 1970, Melbourne operated a standard air group of four jet aircraft, six Trackers, and ten Wessex helicopters until 1972, when the Wessexes were replaced with ten Westland Sea King anti-submarine warfare helicopters and the number of jet fighters doubled. Even though the A-4G’s more and more took over the operational duties on board of Melbourne, the Sea Sabres were still frequently deployed on the carrier, too, until the early Eighties, when both the Skyhawks and the Sea Sabres received once more a new camouflage, this time a wraparound scheme in two shades of grey, reflecting their primary airspace defense mission.
The CAC 27 Mk 41s’ last carrier operations took place in 1981 in the course of Melbourne’s involvements in two major exercises, Sea Hawk and Kangaroo 81, the ship’s final missions at sea. After Melbourne was decommissioned in 1984, the Fleet Air Arm ceased fixed-wing combat aircraft operation. This was the operational end of the Sabre Mk 41, which had reached the end of their airframe lifetime, and the Sea Sabre fleet had, during its career, severely suffered from accidents and losses: upon retirement, only eight of the original twenty-two aircraft still existed in flightworthy condition, so that the aircraft were all scrapped. The younger RAN A-4Gs were eventually sold to New Zealand, where they were kept in service until 2002.
General characteristics:
Crew: 1
Length: 37 ft 6 in (11.43 m)
Wingspan: 37 ft 1 in (11.3 m)
Height: 14 ft 5 in (4.39 m)
Wing area: 302.3 sq ft (28.1 m²)
Empty weight: 12,000 lb (5,443 kg)
Loaded weight: 16,000 lb (7,256 kg)
Max. takeoff weight: 21,210 lb (9,621 kg)
Powerplant:
1× Rolls-Royce Avon 208A turbojet engine with 8,200 lbf (36.44 kN)
Performance:
Maximum speed: 700 mph (1,100 km/h) (605 knots)
Range: 1,153 mi, (1,000 NM, 1,850 km)
Service ceiling: 52,000 ft (15,850 m)
Rate of climb: 12,000 ft/min at sea level (61 m/s)
Armament:
2× 30 mm ADEN cannons with 150 rounds per gun
5,300 lb (2,400 kg) of payload on six external hardpoints;
Bombs were usually mounted on outer two pylons as the mid pair were wet-plumbed pylons for
2× 200 gallons drop tanks, while the inner pair was usually occupied by a pair of AIM-9 Sidewinder
AAMs
A wide variety of bombs could be carried with maximum standard loadout being 2x 1,000 lb bombs
or 2x Matra pods with unguided SURA missiles plus 2 drop tanks for ground attacks, or 2x AIM-9 plus
two drop tanks as day fighter
The kit and its assembly:
This project was initially inspired by a set of decals from an ESCI A-4G which I had bought in a lot – I wondered if I could use it for a submission to the “In the navy” group build at whatifmodelers.com in early 2020. I considered an FJ-3M in Australian colors on this basis and had stashed away a Sword kit of that aircraft for this purpose. However, I had already built an FJ variant for the GB (a kitbashed mix of an F-86D and an FJ-4B in USMC colors), and was reluctant to add another Fury.
This spontaneously changed after (thanks to Corona virus quarantine…) I cleaned up one of my kit hoards and found a conversion set for a 1:72 CAC 27 from JAYS Model Kits which I had bought eons ago without a concrete plan. That was the eventual trigger to spin the RAN Fury idea further – why not a navalized version of the Avon Sabre for HMAS Melbourne?
The result is either another kitbash or a highly modified FJ-3M from Sword. The JAYS Model Kits set comes with a THICK sprue that carries two fuselage halves and an air intake, and it also offers a vacu canopy as a thin fallback option because the set is actually intended to be used together with a Hobby Craft F-86F.
While the parts, molded in a somewhat waxy and brittle styrene, look crude on the massive sprue, the fuselage halves come with very fine recessed engravings. And once you have cleaned the parts (NOTHING for people faint at heart, a mini drill with a saw blade is highly recommended), their fit is surprisingly good. The air intake was so exact that no putty was needed to blend it with the rest of the fuselage.
The rest came from the Sword kit and integrating the parts into the CAC 27 fuselage went more smoothly than expected. For instance, the FJ-3M comes with a nice cockpit tub that also holds a full air intake duct. Thanks to the slightly wider fuselage of the CAC 27, it could be mounted into the new fuselage halves without problems and the intake duct almost perfectly matches the intake frame from the conversion set. The tailpipe could be easily integrated without any mods, too. The fins had to be glued directly to the fuselage – but this is the way how the Sword kit is actually constructed! Even the FJ-3M’s wings match the different fuselage perfectly. The only modifications I had to make is a slight enlargement of the ventral wing opening at the front and at the read in order to take the deeper wing element from the Sword kit, but that was an easy task. Once in place, the parts blend almost perfectly into each other, just minor PSR was necessary to hide the seams!
Other mods include an extended front wheel well for the longer leg from the FJ-3M and a scratched arrester hook installation, made from wire, which is on purpose different from the Y-shaped hook of the Furies.
For the canopy I relied on the vacu piece that came with the JAYS set. Fitting it was not easy, though, it took some PSR to blend the windscreen into the rest of the fuselage. Not perfect, but O.K. for such a solution from a conversion set.
The underwing pylons were taken from the Sword kit, including the early Sidewinders. I just replaced the drop tanks – the OOB tanks are very wide, and even though they might be authentic for the FJ-3, I was skeptical if they fit at all under the wings with the landing gear extended? In order to avoid trouble and for a more modern look, I replaced them outright with more slender tanks, which were to mimic A-4 tanks (USN FJ-4s frequently carried Skyhawk tanks). They actually come from a Revell F-16 kit, with modified fins. The refueling probe comes from the Sword kit.
A last word about the Sword kit: much light, but also much shadow. While I appreciate the fine surface engravings, the recognizably cambered wings, a detailed cockpit with a two-piece resin seat and a pretty landing gear as well as the long air intake, I wonder why the creators totally failed to provide ANY detail of the arrester hook (there is literally nothing, as if this was a land-based Sabre variant!?) or went for doubtful solutions like a front landing gear that consists of five(!) single, tiny parts? Sadism? The resin seat was also broken (despite being packed in a seperate bag), and it did not fit into the cockpit tub at all. Meh!
Painting and markings:
From the start I planned to give the model the late RAN A-4Gs’ unique air superiority paint scheme, which was AFAIK introduced in the late Seventies: a two-tone wraparound scheme consisting of “Light Admiralty Grey” (BS381C 697) and “Aircraft Grey” (BS 381C 693). Quite simple, but finding suitable paints was not an easy task, and I based my choice on pictures of the real aircraft (esp. from "buzz" number 880 at the Fleet Air Arm Museum, you find pics of it with very good light condition) rather than rely on (pretty doubtful if not contradictive) recommendations in various painting instructions from models or decal sets.
I wanted to keep things simple and settled upon Dark Gull Grey (FS 36231) and Light Blue (FS 35414), both enamel colors from Modelmaster, since both are rather dull interpretations of these tones. Esp. the Light Blue comes quite close to Light Admiralty Grey, even though it should be lighter for more contrast to the darker grey tone. But it has that subtle greenish touch of the original BS tone, and I did not want to mix the colors.
The pattern was adapted from the late A-4Gs’ scheme, and the colors were dulled down even more through a light black ink wash. Some post-shading with lighter tones emphasized the contrast between the two colors again. And while it is not an exact representation of the unique RAN air superiority scheme, I think that the overall impression is there.
The cockpit interior was painted in very dark grey, while the landing gear, its wells and the inside of the air intake became white. A red rim was painted around the front opening, and the landing gear covers received a red outline, too. The white drop tanks are a detail I took from real world RAN A-4Gs - in the early days of the air superiority scheme, the tanks were frequently still finished in the old USN style livery, hence the white body but fins and tail section already in the updated colors.
The decals became a fight, though. As mentioned above, the came from an ESCI kit – and, as expected, the were brittle. All decals with a clear carrier film disintegrated while soaking in water, only those with a fully printed carrier film were more or less usable. One roundel broke and had to be repaired, and the checkered fin flash was a very delicate affair that broke several times, even though I tried to save and repair it with paint. But you can unfortunately see the damage.
Most stencils and some replacements (e. g. the “Navy” tag) come from the Sword FJ-3. While these decals are crisply printed, their carrier film is utterly thin, so thin that applying esp. the larger decals turned out to be hazardous and complicated. Another point that did not really convince me about the Sword kit.
Finally, the kit was sealed with matt acrylic varnish (Italeri) and some soot stains were added around the exhaust and the gun ports with graphite.
In the end, this build looks, despite the troubles and the rather exotic ingredients like a relatively simple Sabre with Australian markings, just with a different Navy livery. You neither immediately recognize the FJ-3 behind it, nor the Avon Sabre’s bigger fuselage, unless you take a close and probably educated look. Very subtle, though.
The RAN air superiority scheme from the late Skyhawks suits the Sabre/Fury-thing well – I like the fact that it is a modern fighter scheme, but, thanks to the tones and the colorful other markings, not as dull and boring like many others, e. g. the contemporary USN "Ghost" scheme. Made me wonder about an early RAAF F-18 in this livery - should look very pretty, too?
Meet two of Wigan’s newest recruits. James Booth and Stacey Whitehouse will become PCs next month.
The first recruits to join GMP in five years are finishing their training by visiting their new patches.
In a few weeks’ time 100 new officers will be attested at a ceremony in Salford before becoming fully operational officers within neighbourhood policing teams across Greater Manchester.
The new recruits are being officially introduced to the areas that they will be policing, getting to know the local area, meeting community groups and attending briefings to learn from officers who already work there.
The 100 are all former GMP employees having previously been either Police Community Support Officers (PCSO), Special Constables, apprentices or police staff.
Deputy Chief Constable Ian Pilling, said: “The introduction of these 100 new officers is part of our commitment to neighbourhood policing across Greater Manchester.
“Many of these recruits will be building upon their experience as former PCSOs or Special Constables and will therefore already have established the skills necessary to succeed in neighbourhood policing.
“The recruits join GMP as we make full use of the latest technology, including smartphones and tablets, which will allow frontline officers to spend more time out policing in the community.
“Through the ongoing recruitment we continue with our commitment to make sure that Greater Manchester Police is representative of the people and communities in which we serve.”
Greater Manchester Mayor and Police and Crime Commissioner Tony Lloyd said: “For the first time in five years we will see a significant number of new police officers patrolling our streets, which is good news for the communities of Greater Manchester.
“Local people have told me that they want a strong and sustainable police service keeping them and their homes safe. Despite ongoing government cuts to policing, I am determined to deliver that, working with the Chief Constable to drive forward new recruitment to bolster local policing.“
500 new officers will join the Force this year but the total number of overall officers will be maintained at current levels.
To find out more about Greater Manchester Police www.gmp.police.uk
You should call 101, the national non-emergency number, to report crime and other concerns that do not require an emergency response.
Always call 999 in an emergency, such as when a crime is in progress, violence is being used or threatened or where there is danger to life.
You can also call anonymously with information about crime to Crimestoppers on 0800 555 111. Crimestoppers is an independent charity who will not want your name, just your information. Your call will not be traced or recorded and you do not have to go to court or give a statement.
+++ DISCLAIMER +++
Nothing you see here is real, even though the conversion or the presented background story might be based on historical facts. BEWARE!
Some background:
The CAC Sabre, sometimes known as the Avon Sabre or CA-27, was an Australian variant of the North American Aviation F-86F Sabre fighter aircraft. In 1951, Commonwealth Aircraft Corporation obtained a license agreement to build the F-86F Sabre. In a major departure from the North American blueprint, it was decided that the CA-27 would be powered by a license-built version of the Rolls-Royce Avon R.A.7, rather than the General Electric J47. In theory, the Avon was capable of more than double the maximum thrust and double the thrust-to-weight ratio of the US engine. This necessitated a re-design of the fuselage, as the Avon was shorter, wider and lighter than the J47.
To accommodate the Avon, over 60 percent of the fuselage was altered and there was a 25 percent increase in the size of the air intake. Another major revision was in replacing the F-86F's six machine guns with two 30mm ADEN cannon, while other changes were also made to the cockpit and to provide an increased fuel capacity.
The prototype aircraft first flew on 3 August 1953. The production aircrafts' first deliveries to the Royal Australian Air Force began in 1954. The first batch of aircraft were powered by the Avon 20 engine and were designated the Sabre Mk 30. Between 1957 and 1958 this batch had the wing slats removed and were re-designated Sabre Mk 31. These Sabres were supplemented by 20 new-built aircraft. The last batch of aircraft were designated Sabre Mk 32 and used the Avon 26 engine, of which 69 were built up to 1961.
Beyond these land-based versions, an indigenous version for carrier operations had been developed and built in small numbers, too, the Sea Sabre Mk 40 and 41. The roots of this aircraft, which was rather a prestigious idea than a sensible project, could be traced back to the immediate post WWII era. A review by the Australian Government's Defence Committee recommended that the post-war forces of the RAN be structured around a Task Force incorporating multiple aircraft carriers. Initial plans were for three carriers, with two active and a third in reserve, although funding cuts led to the purchase of only two carriers in June 1947: Majestic and sister ship HMS Terrible, for the combined cost of AU£2.75 million, plus stores, fuel, and ammunition. As Terrible was the closer of the two ships to completion, she was finished without modification, and was commissioned into the RAN on 16 December 1948 as HMAS Sydney. Work progressed on Majestic at a slower rate, as she was upgraded with the latest technology and equipment. To cover Majestic's absence, the Colossus-class carrier HMS Vengeance was loaned to the RAN from 13 November 1952 until 12 August 1955.
Labour difficulties, late delivery of equipment, additional requirements for Australian operations, and the prioritization of merchant ships over naval construction delayed the completion of Majestic. Incorporation of new systems and enhancements caused the cost of the RAN carrier acquisition program to increase to AU£8.3 million. Construction and fitting out did not finish until October 1955. As the carrier neared completion, a commissioning crew was formed in Australia and first used to return Vengeance to the United Kingdom.
The completed carrier was commissioned into the RAN as HMAS Majestic on 26 October 1955, but only two days later, the ship was renamed Melbourne and recommissioned.
In the meantime, the rather political decision had been made to equip Melbourne with an indigenous jet-powered aircraft, replacing the piston-driven Hawker Fury that had been successfully operated from HMAS Sydney and HMAS Vengeance, so that the "new jet age" was even more recognizable. The choice fell on the CAC Sabre, certainly inspired by North American's successful contemporary development of the navalized FJ-2 Fury from the land-based F-86 Sabre. The CAC 27 was already a proven design, and with its more powerful Avon engine it even offered a better suitability for carrier operations than the FJ-2 with its rather weak J47 engine.
Work on this project, which was initially simply designated Sabre Mk 40, started in 1954, just when the first CAC 27's were delivered to operative RAAF units. While the navalized Avon Sabre differed outwardly only little from its land-based brethren, many details were changed and locally developed. Therefore, there was also, beyond the general outlines, little in common with the North American FJ-2 an -3 Fury.
Externally, a completely new wing with a folding mechanism was fitted. It was based on the F-86's so-called "6-3" wing, with a leading edge that was extended 6 inches at the root and 3 inches at the tip. This modification enhanced maneuverability at the expense of a small increase in landing speed due to deletion of the leading edge slats, a detail that was later introduced on the Sabre Mk 31, too. As a side benefit, the new wing leading edges without the slat mechanisms held extra fuel. However, the Mk 40's wing was different as camber was applied to the underside of the leading edge to improve low-speed handling for carrier operations. The wings were provided with four stations outboard of the landing gear wells for up to 1000 lb external loads on the inboard stations and 500 lb on the outboard stations.
Slightly larger stabilizers were fitted and the landing gear was strengthened, including a longer front wheel strut. The latter necessitated an enlarged front wheel well, so that the front leg’s attachment point had to be moved forward. A ventral launch cable hook was added under the wing roots and an external massive arrester hook under the rear fuselage.
Internally, systems were protected against salt and humidity and a Rolls-Royce Avon 211 turbojet was fitted, a downrated variant of the already navalized Avon 208 from the British DH Sea Vixen, but adapted to the different CAC 27 airframe and delivering 8.000 lbf (35.5 kN) thrust – slightly more than the engines of the land-based CAC Sabres, but also without an afterburner.
A single Mk 40 prototype was built from a new CAC 27 airframe taken directly from the production line in early 1955 and made its maiden flight on August 20th of the same year. In order to reflect its naval nature and its ancestry, this new CAC 27 variant was officially christened “Sea Sabre”.
Even though the modified machine handled well, and the new, cambered wing proved to be effective, many minor technical flaws were discovered and delayed the aircraft's development until 1957. These included the wing folding mechanism and the respective fuel plumbing connections, the landing gear, which had to be beefed up even more for hard carrier landings and the airframe’s structural strength for catapult launches, esp. around the ventral launch hook.
In the meantime, work on the land-based CAC 27 progressed in parallel, too, and innovations that led to the Mk 31 and 32 were also incorporated into the naval Mk 40, leading to the Sea Sabre Mk 41, which became the effective production aircraft. These updates included, among others, a detachable (but fixed) refueling probe under the starboard wing, two more pylons for light loads located under the wing roots and the capability to carry and deploy IR-guided AIM-9 Sidewinder air-to-air missiles, what significantly increased the Mk 41's efficiency as day fighter. With all these constant changes it took until April 1958 that the Sabre Mk 41, after a second prototype had been directly built to the new standard, was finally approved and cleared for production. Upon delivery, the RAN Sea Sabres carried a standard NATO paint scheme with Extra Dark Sea Grey upper surfaces and Sky undersides.
In the meantime, the political enthusiasm concerning the Australian carrier fleet had waned, so that only twenty-two aircraft were ordered. The reason behind this decision was that Australia’s carrier fleet and its capacity had become severely reduced: Following the first decommissioning of HMAS Sydney in 1958, Melbourne became the only aircraft carrier in Australian service, and she was unavailable to provide air cover for the RAN for up to four months in every year; this time was required for refits, refueling, personnel leave, and non-carrier duties, such as the transportation of troops or aircraft. Although one of the largest ships to serve in the RAN, Melbourne was one of the smallest carriers to operate in the post-World War II period, so that its contribution to military actions was rather limited. To make matters worse, a decision was made in 1959 to restrict Melbourne's role to helicopter operations only, rendering any carrier-based aircraft in Australian service obsolete. However, this decision was reversed shortly before its planned 1963 implementation, but Australia’s fleet of carrier-borne fixed-wing aircraft would not grow to proportions envisioned 10 years ago.
Nevertheless, on 10 November 1964, an AU£212 million increase in defense spending included the purchase of new aircraft for Melbourne. The RAN planned to acquire 14 Grumman S-2E Tracker anti-submarine aircraft and to modernize Melbourne to operate these. The acquisition of 18 new fighter-bombers was suggested (either Sea Sabre Mk 41s or the American Douglas A-4 Skyhawk), too, but these were dropped from the initial plan. A separate proposal to order 10 A-4G Skyhawks, a variant of the Skyhawk designed specifically for the RAN and optimized for air defense, was approved in 1965, but the new aircraft did not fly from Melbourne until the conclusion of her refit in 1969. This move, however, precluded the production of any new and further Sea Sabre.
At that time, the RAN Sea Sabres received a new livery in US Navy style, with upper surfaces in Light Gull Gray with white undersides. The CAC Sea Sabres remained the main day fighter and attack aircraft for the RAN, after the vintage Sea Furies had been retired in 1962. The other contemporary RAN fighter type in service, the Sea Venom FAW.53 all-weather fighter that had replaced the Furies, already showed its obsolescence.
In 1969, the RAN purchased another ten A-4G Skyhawks, primarily in order to replace the Sea Venoms on the carriers, instead of the proposed seventh and eighth Oberon-class submarines. These were operated together with the Sea Sabres in mixed units on board of Melbourne and from land bases, e.g. from NAS Nowra in New South Wales, where a number of Sea Sabres were also allocated to 724 Squadron for operational training.
Around 1970, Melbourne operated a standard air group of four jet aircraft, six Trackers, and ten Wessex helicopters until 1972, when the Wessexes were replaced with ten Westland Sea King anti-submarine warfare helicopters and the number of jet fighters doubled. Even though the A-4G’s more and more took over the operational duties on board of Melbourne, the Sea Sabres were still frequently deployed on the carrier, too, until the early Eighties, when both the Skyhawks and the Sea Sabres received once more a new camouflage, this time a wraparound scheme in two shades of grey, reflecting their primary airspace defense mission.
The CAC 27 Mk 41s’ last carrier operations took place in 1981 in the course of Melbourne’s involvements in two major exercises, Sea Hawk and Kangaroo 81, the ship’s final missions at sea. After Melbourne was decommissioned in 1984, the Fleet Air Arm ceased fixed-wing combat aircraft operation. This was the operational end of the Sabre Mk 41, which had reached the end of their airframe lifetime, and the Sea Sabre fleet had, during its career, severely suffered from accidents and losses: upon retirement, only eight of the original twenty-two aircraft still existed in flightworthy condition, so that the aircraft were all scrapped. The younger RAN A-4Gs were eventually sold to New Zealand, where they were kept in service until 2002.
General characteristics:
Crew: 1
Length: 37 ft 6 in (11.43 m)
Wingspan: 37 ft 1 in (11.3 m)
Height: 14 ft 5 in (4.39 m)
Wing area: 302.3 sq ft (28.1 m²)
Empty weight: 12,000 lb (5,443 kg)
Loaded weight: 16,000 lb (7,256 kg)
Max. takeoff weight: 21,210 lb (9,621 kg)
Powerplant:
1× Rolls-Royce Avon 208A turbojet engine with 8,200 lbf (36.44 kN)
Performance:
Maximum speed: 700 mph (1,100 km/h) (605 knots)
Range: 1,153 mi, (1,000 NM, 1,850 km)
Service ceiling: 52,000 ft (15,850 m)
Rate of climb: 12,000 ft/min at sea level (61 m/s)
Armament:
2× 30 mm ADEN cannons with 150 rounds per gun
5,300 lb (2,400 kg) of payload on six external hardpoints;
Bombs were usually mounted on outer two pylons as the mid pair were wet-plumbed pylons for
2× 200 gallons drop tanks, while the inner pair was usually occupied by a pair of AIM-9 Sidewinder
AAMs
A wide variety of bombs could be carried with maximum standard loadout being 2x 1,000 lb bombs
or 2x Matra pods with unguided SURA missiles plus 2 drop tanks for ground attacks, or 2x AIM-9 plus
two drop tanks as day fighter
The kit and its assembly:
This project was initially inspired by a set of decals from an ESCI A-4G which I had bought in a lot – I wondered if I could use it for a submission to the “In the navy” group build at whatifmodelers.com in early 2020. I considered an FJ-3M in Australian colors on this basis and had stashed away a Sword kit of that aircraft for this purpose. However, I had already built an FJ variant for the GB (a kitbashed mix of an F-86D and an FJ-4B in USMC colors), and was reluctant to add another Fury.
This spontaneously changed after (thanks to Corona virus quarantine…) I cleaned up one of my kit hoards and found a conversion set for a 1:72 CAC 27 from JAYS Model Kits which I had bought eons ago without a concrete plan. That was the eventual trigger to spin the RAN Fury idea further – why not a navalized version of the Avon Sabre for HMAS Melbourne?
The result is either another kitbash or a highly modified FJ-3M from Sword. The JAYS Model Kits set comes with a THICK sprue that carries two fuselage halves and an air intake, and it also offers a vacu canopy as a thin fallback option because the set is actually intended to be used together with a Hobby Craft F-86F.
While the parts, molded in a somewhat waxy and brittle styrene, look crude on the massive sprue, the fuselage halves come with very fine recessed engravings. And once you have cleaned the parts (NOTHING for people faint at heart, a mini drill with a saw blade is highly recommended), their fit is surprisingly good. The air intake was so exact that no putty was needed to blend it with the rest of the fuselage.
The rest came from the Sword kit and integrating the parts into the CAC 27 fuselage went more smoothly than expected. For instance, the FJ-3M comes with a nice cockpit tub that also holds a full air intake duct. Thanks to the slightly wider fuselage of the CAC 27, it could be mounted into the new fuselage halves without problems and the intake duct almost perfectly matches the intake frame from the conversion set. The tailpipe could be easily integrated without any mods, too. The fins had to be glued directly to the fuselage – but this is the way how the Sword kit is actually constructed! Even the FJ-3M’s wings match the different fuselage perfectly. The only modifications I had to make is a slight enlargement of the ventral wing opening at the front and at the read in order to take the deeper wing element from the Sword kit, but that was an easy task. Once in place, the parts blend almost perfectly into each other, just minor PSR was necessary to hide the seams!
Other mods include an extended front wheel well for the longer leg from the FJ-3M and a scratched arrester hook installation, made from wire, which is on purpose different from the Y-shaped hook of the Furies.
For the canopy I relied on the vacu piece that came with the JAYS set. Fitting it was not easy, though, it took some PSR to blend the windscreen into the rest of the fuselage. Not perfect, but O.K. for such a solution from a conversion set.
The underwing pylons were taken from the Sword kit, including the early Sidewinders. I just replaced the drop tanks – the OOB tanks are very wide, and even though they might be authentic for the FJ-3, I was skeptical if they fit at all under the wings with the landing gear extended? In order to avoid trouble and for a more modern look, I replaced them outright with more slender tanks, which were to mimic A-4 tanks (USN FJ-4s frequently carried Skyhawk tanks). They actually come from a Revell F-16 kit, with modified fins. The refueling probe comes from the Sword kit.
A last word about the Sword kit: much light, but also much shadow. While I appreciate the fine surface engravings, the recognizably cambered wings, a detailed cockpit with a two-piece resin seat and a pretty landing gear as well as the long air intake, I wonder why the creators totally failed to provide ANY detail of the arrester hook (there is literally nothing, as if this was a land-based Sabre variant!?) or went for doubtful solutions like a front landing gear that consists of five(!) single, tiny parts? Sadism? The resin seat was also broken (despite being packed in a seperate bag), and it did not fit into the cockpit tub at all. Meh!
Painting and markings:
From the start I planned to give the model the late RAN A-4Gs’ unique air superiority paint scheme, which was AFAIK introduced in the late Seventies: a two-tone wraparound scheme consisting of “Light Admiralty Grey” (BS381C 697) and “Aircraft Grey” (BS 381C 693). Quite simple, but finding suitable paints was not an easy task, and I based my choice on pictures of the real aircraft (esp. from "buzz" number 880 at the Fleet Air Arm Museum, you find pics of it with very good light condition) rather than rely on (pretty doubtful if not contradictive) recommendations in various painting instructions from models or decal sets.
I wanted to keep things simple and settled upon Dark Gull Grey (FS 36231) and Light Blue (FS 35414), both enamel colors from Modelmaster, since both are rather dull interpretations of these tones. Esp. the Light Blue comes quite close to Light Admiralty Grey, even though it should be lighter for more contrast to the darker grey tone. But it has that subtle greenish touch of the original BS tone, and I did not want to mix the colors.
The pattern was adapted from the late A-4Gs’ scheme, and the colors were dulled down even more through a light black ink wash. Some post-shading with lighter tones emphasized the contrast between the two colors again. And while it is not an exact representation of the unique RAN air superiority scheme, I think that the overall impression is there.
The cockpit interior was painted in very dark grey, while the landing gear, its wells and the inside of the air intake became white. A red rim was painted around the front opening, and the landing gear covers received a red outline, too. The white drop tanks are a detail I took from real world RAN A-4Gs - in the early days of the air superiority scheme, the tanks were frequently still finished in the old USN style livery, hence the white body but fins and tail section already in the updated colors.
The decals became a fight, though. As mentioned above, the came from an ESCI kit – and, as expected, the were brittle. All decals with a clear carrier film disintegrated while soaking in water, only those with a fully printed carrier film were more or less usable. One roundel broke and had to be repaired, and the checkered fin flash was a very delicate affair that broke several times, even though I tried to save and repair it with paint. But you can unfortunately see the damage.
Most stencils and some replacements (e. g. the “Navy” tag) come from the Sword FJ-3. While these decals are crisply printed, their carrier film is utterly thin, so thin that applying esp. the larger decals turned out to be hazardous and complicated. Another point that did not really convince me about the Sword kit.
Finally, the kit was sealed with matt acrylic varnish (Italeri) and some soot stains were added around the exhaust and the gun ports with graphite.
In the end, this build looks, despite the troubles and the rather exotic ingredients like a relatively simple Sabre with Australian markings, just with a different Navy livery. You neither immediately recognize the FJ-3 behind it, nor the Avon Sabre’s bigger fuselage, unless you take a close and probably educated look. Very subtle, though.
The RAN air superiority scheme from the late Skyhawks suits the Sabre/Fury-thing well – I like the fact that it is a modern fighter scheme, but, thanks to the tones and the colorful other markings, not as dull and boring like many others, e. g. the contemporary USN "Ghost" scheme. Made me wonder about an early RAAF F-18 in this livery - should look very pretty, too?
Joseph's Church (St. Pölten )
Catholic Parish Church of St. Josef
Object ID : 26022 Kranzbichlerstraße 24a
The wide three-aisled pillar basilica under a gable roof with a transept was built 1924-1929 in Romanesque style according to the plans of the architect Matthäus Schlager.
The Parish Church of St. Joseph is a Roman Catholic church in the city of St. Pölten.
On the north side there are three portals, the middle portal is funnel-shaped, the facades have rounded arch windows and a historicized Traufgesims (eaves cornice). The retracted choir has a round apse. To the west of the church, to Mariazellerstraße is situated a freestanding metal casting statue Christ by sculptor Karl Schwerzek. The high church tower under a pitched roof is to the west at transept and choir juxtaposed. The square in front of the entrance facade was named with Father Paul's Place and on Paul Wörndl as the first pastor of the church a memorial plaque at the church installed.
Inside is the church as well as the organ loft on the north side continuously kreuzgratgewölbt (groined vaulted) and baroquising monumentally designed. The interior of the church, such as altar, Stipes (thick post - substructur of the altar) with stepped retabel wall, tabernacles with reliefs, like a statue of Saint Josef, were created based on designs by the sculptor Heinrich Zita 1933. The wall paintings in the vaults and in the shallow round arched niches in the apse and the side altars are by the painter Sepp Zöchling from 1958.
de.wikipedia.org/wiki/Liste_der_denkmalgesch%C3%BCtzten_O...(Stadtteil)
de.wikipedia.org/wiki/Josefskirche_(St._P%C3%B6lten)
(further information is available by clicking on the link at the end of page!)
History of the City St. Pölten
In order to present concise history of the Lower Austrian capital is in the shop of the city museum a richly illustrated full version on CD-ROM.
Tip
On the occasion of the commemoration of the pogroms of November 1938, the Institute for Jewish History of Austria its virtual Memorbuch (Memory book) for the destroyed St. Pölten Jewish community since 10th November 2012 is putting online.
Prehistory
The time from which there is no written record is named after the main materials used for tools and weapons: Stone Age, Bronze Age, Iron Age. Using the latest technologies, archaeologists from archaeological finds and aerial photographs can trace a fairly detailed picture of life at that time. Especially for the time from the settling down of the People (New Stone Age), now practicing agriculture and animal husbandry, in the territory of St. Pölten lively settlement activity can be proved. In particular, cemeteries are important for the research, because the dead were laid in the grave everyday objects and jewelry, the forms of burial changing over time - which in turn gives the archeology valuable clues for the temporal determination. At the same time, prehistory of Sankt Pölten would not be half as good documented without the construction of the expressway S33 and other large buildings, where millions of cubic meters of earth were moved - under the watchful eyes of the Federal Monuments Office!
A final primeval chapter characterized the Celts, who settled about 450 BC our area and in addition to a new culture and religion also brought with them the potter's wheel. The kingdom of Noricum influenced till the penetration of the Romans the development in our area.
Roman period, migrations
The Romans conquered in 15 BC the Celtic Empire and established hereinafter the Roman province of Noricum. Borders were protected by military camp (forts), in the hinterland emerged civilian cities, almost all systematically laid out according to the same plan. The civil and commercial city Aelium Cetium, as St. Pölten was called (city law 121/122), consisted in the 4th Century already of heated stone houses, trade and craft originated thriving urban life, before the Romans in the first third of the 5th Century retreated to Italy.
The subsequent period went down as the Migration Period in official historiography, for which the settlement of the Sankt Pöltner downtown can not be proved. Cemeteries witness the residence of the Lombards in our area, later it was the Avars, extending their empire to the Enns.
The recent archaeological excavations on the Cathedral Square 2010/2011, in fact, the previous knowledge of St.Pölten colonization not have turned upside down but enriched by many details, whose full analysis and publication are expected in the near future.
Middle Ages
With the submission of the Avars by Charlemagne around 800 AD Christianity was gaining a foothold, the Bavarian Benedictine monastery of Tegernsee establishing a daughter house here - as founder are mentioned the brothers Adalbert and Ottokar - equipped with the relics of St. Hippolytus. The name St. Ypolit over the centuries should turn into Sankt Pölten. After the Hungarian wars and the resettlement of the monastery as Canons Regular of St. Augustine under the influence of Passau St. Pölten received mid-11th Century market rights.
In the second half of the 20th century historians stated that records in which the rights of citizens were held were to be qualified as Town Charters. Vienna is indeed already in 1137 as a city ("civitas") mentioned in a document, but the oldest Viennese city charter dates only from the year 1221, while the Bishop of Passau, Konrad, already in 1159 the St. Pöltnern secured:
A St. Pöltner citizen who has to answer to the court, has the right to make use of an "advocate".
He must not be forced to rid himself of the accusation by a judgment of God.
A St. Pöltner citizen may be convicted only by statements of fellow citizens, not by strangers.
From the 13th Century exercised a city judge appointed by the lord of the city the high and low jurisdiction as chairman of the council meetings and the Municipal Court, Inner and Outer Council supported him during the finding of justice. Venue for the public verdict was the in the 13th Century created new marketplace, the "Broad Market", now the town hall square. Originally square-shaped, it was only later to a rectangle reduced. Around it arose the market district, which together with the monastery district, the wood district and the Ledererviertel (quarter of the leather goods manufacturer) was protected by a double city wall.
The dependence of St. Pölten of the bishop of Passau is shown in the municipal coat of arms and the city seal. Based on the emblem of the heraldic animal of the Lord of the city, so the Bishop of Passau, it shows an upright standing wolf holding a crosier in its paw.
Modern Times
In the course of the armed conflict between the Emperor Frederick III . and King Matthias of Hungary pledged the Bishop of Passau the town on the Hungarian king. From 1485 stood Lower Austria as a whole under Hungarian rule. The most important document of this period is the awarding of the city coat of arms by King Matthias Corvinus in the year 1487. After the death of the opponents 1490 and 1493 could Frederick's son Maximilian reconquer Lower Austria. He considered St. Pölten as spoils of war and had no intention of returning it to the diocese of Passau. The city government has often been leased subsequently, for instance, to the family Wellenstein, and later to the families Trautson and Auersperg.
That St. Pölten now was a princely city, found its expression in the coat of arms letter of the King Ferdinand I. from 1538: From now on, the wolf had no crosier anymore, and the from the viewer's point of view left half showed the reverse Austrian shield, so silver-red-silver.
To the 16th Century also goes back the construction of St. Pöltner City Hall. The 1503 by judge and council acquired house was subsequently expanded, rebuilt, extended and provided with a tower.
A for the urban history research important picture, painted in 1623, has captured scenes of the peasant uprising of 1597, but also allows a view to the city and lets the viewer read some of the details of the then state of construction. The economic inconveniences of that time were only exacerbated by the Thirty Years War, at the end of which a fifth of the houses were uninhabited and the citizenry was impoverished.
Baroque
After the successful defense against the Turks in 1683, the economy started to recover and a significant building boom began. Lower Austria turned into the land of the baroque abbeys and monasteries, as it is familiar to us today.
In St. Pölten, the change of the cityscape is closely connected to the Baroque architect Jakob Prandtauer. In addition to the Baroquisation of the interior of the cathedral, a number of buildings in St. Pölten go to his account, so the reconstruction of the castle Ochsenburg, the erection of the Schwaighof and of the core building of the Institute of the Blessed Virgin Mary (Englische Fräuleins - English Maidens) - from 1706 the seat of the first school order of St.Pölten - as well as of several bourgeois houses.
Joseph Munggenast, nephew and co-worker of Prandtauer, completed the Baroquisation of the cathedral, he baroquised the facade of the town hall (1727) and numerous bourgeois houses and designed a bridge over the Traisen which existed until 1907. In the decoration of the church buildings were throughout Tyroleans collaborating, which Jakob Prandtauer had brought along from his homeland (Tyrol) to St. Pölten, for example, Paul Troger and Peter Widerin.
Maria Theresa and her son Joseph II: Their reforms in the city of the 18th Century also left a significant mark. School foundings as a result of compulsory education, the dissolution of the monasteries and hereinafter - from 1785 - the new role of St. Pölten as a bishop's seat are consequences of their policies.
1785 was also the year of a fundamental alteration of the old Council Constitution: The city judge was replaced by one magistrate consisting of five persons, at the head was a mayor. For the first mayor the painter Josef Hackl was chosen.
The 19th century
Despite the Napoleonic Wars - St. Pölten in 1805 and 1809 was occupied by the French - and despite the state bankruptcy of 1811, increased the number of businesses constantly, although the economic importance of the city for the time being did not go beyond the near vicinity.
Against the background of monitoring by the state secret police, which prevented any political commitment between the Congress of Vienna and the 1848 revolution, the citizens withdrew into private life. Sense of family, fostering of domestic music, prominent salon societies in which even a Franz Schubert socialized, or the construction of the city theater were visible signs of this attitude.
The economic upswing of the city did not begin until after the revolution of the year 1848. A prerequisite for this was the construction of the Empress Elisabeth Western Railway, moving Vienna, Linz, soon Salzburg, too, in a reachable distance. The city walls were pulled down, St. Pölten could unfold. The convenient traffic situation favored factory start-ups, and so arose a lace factory, a revolver factory, a soap factory or, for example, as a precursor of a future large-scale enterprise, the braid, ribbon and Strickgarnerzeugung (knitting yarn production) of Matthias Salcher in Harland.
In other areas, too, the Gründerzeit (years of rapid industrial expansion in Germany - and Austria) in Sankt Pölten was honouring its name: The city got schools, a hospital, gas lanterns, canalization, hot springs and summer bath.
The 20th century
At the beginning of the 20th Century the city experienced another burst of development, initiated by the construction of the power station in 1903, because electricity was the prerequisite for the settlement of large companies. In particular, the companies Voith and Glanzstoff and the main workshop of the Federal Railways attracted many workers. New Traisen bridge, tram, Mariazell Railway and other infrastructure buildings were erected; St. Pölten obtained a synagogue. The Art Nouveau made it repeatedly into the urban architecture - just think of the Olbrich House - and inspired also the painting, as exponents worth to be mentioned are Ernst Stöhr or Ferdinand Andri.
What the outbreak of the First World War in broad outlines meant for the monarchy, on a smaller scale also St. Pölten has felt. The city was heavily impacted by the deployment of army units, a POW camp, a military hospital and a sick bay. Industrial enterprises were partly converted into war production, partly closed. Unemployment, housing emergency and food shortages long after the war still were felt painfully.
The 1919 to mayor elected Social Democrat Hubert Schnofl after the war tried to raise the standard of living of the people by improving the social welfare and health care. The founding of a housing cooperative (Wohnungsgenossenschaft), the construction of the water line and the establishment of new factories were further attempts to stimulate the stiffening economy whose descent could not be stopped until 1932.
After the National Socialist regime had stirred false hopes and plunged the world into war, St. Pölten was no longer the city as it has been before. Not only the ten devastating bombings of the last year of the war had left its marks, also the restrictive persecution of Jews and political dissidents had torn holes in the structure of the population. Ten years of Russian occupation subsequently did the rest to traumatize the population, but at this time arose from the ruins a more modern St. Pölten, with the new Traisen bridge, district heating, schools.
This trend continued, an era of recovery and modernization made the economic miracle palpable. Already in 1972 was - even if largely as a result of incorporations - exceeded the 50.000-inhabitant-limit.
Elevation to capital status (capital of Lower Austria), 10 July 1986: No other event in this dimension could have become the booster detonation of an up to now ongoing development thrust. Since then in a big way new residential and commercial areas were opened up, built infrastructure constructions, schools and universities brought into being to enrich the educational landscape. East of the Old Town arose the governmental and cultural district, and the list of architects wears sonorous names such as Ernst Hoffmann (NÖ (Lower Austria) Landhaus; Klangturm), Klaus Kada (Festspielhaus), Hans Hollein (Shedhalle and Lower Austrian Provincial Museum), Karin Bily, Paul Katzberger and Michael Loudon ( NÖ State Library and NÖ State Archive).
European Diploma, European flag, badge of honor, Europe Price: Between 1996 and 2001, received St. Pölten numerous appreciations of its EU commitment - as a sort of recognition of the Council of Europe for the dissemination of the EU-idea through international town twinnings, a major Europe exhibition or, for example, the establishment and chair of the "Network of European medium-sized cities".
On the way into the 21st century
Just now happened and already history: What the St. Pöltnern as just experienced sticks in their minds, travelers and newcomers within a short time should be told. The theater and the hospital handing over to the province of Lower Austria, a new mayor always on the go, who was able to earn since 2004 already numerous laurels (Tags: polytechnic, downtown enhancement, building lease scheme, bus concept) - all the recent changes are just now condensed into spoken and written language in order to make, from now on, the history of the young provincial capital in the 3rd millennium nachlesbar (checkable).
www.st-poelten.gv.at/Content.Node/freizeit-kultur/kultur/...
A view of the west side of Gropius House in Lincoln, Massachusetts. The upper deck was built for Gropius' 12-year old daughter who wanted to be able to sleep under the stars. It is directly accessible from her bedroom and includes a spiral stairway as her own private entrance, a feature she had also requested.
Walter Gropius founded the Bauhaus school of design in Weimar Germany following World War I and built this house as his family home in 1938 after moving to the United States to accept a teaching position at Harvard University. The design of the house reflects the Bauhaus principles of simplicity, efficiency, and aesthetics combined with the use of basic materials and the latest technology. The home also features many other traditional Bauhaus elements, including its furniture, art, and landscaping. Due to Gropius' enormous influence on 20th century architecture, his house was designated a National Historic Landmark on May 16, 2000.
For additional information on the house, Walter Gropius, and the Bauhaus, see these links:
www.historicnewengland.org/historic-properties/homes/Grop...
en.wikipedia.org/wiki/Gropius_House
Joseph's Church (St. Pölten )
Catholic Parish Church of St. Josef
Object ID : 26022 Kranzbichlerstraße 24a
The wide three-aisled pillar basilica under a gable roof with a transept was built 1924-1929 in Romanesque style according to the plans of the architect Matthäus Schlager.
The Parish Church of St. Joseph is a Roman Catholic church in the city of St. Pölten.
On the north side there are three portals, the middle portal is funnel-shaped, the facades have rounded arch windows and a historicized Traufgesims (eaves cornice). The retracted choir has a round apse. To the west of the church, to Mariazellerstraße is situated a freestanding metal casting statue Christ by sculptor Karl Schwerzek. The high church tower under a pitched roof is to the west at transept and choir juxtaposed. The square in front of the entrance facade was named with Father Paul's Place and on Paul Wörndl as the first pastor of the church a memorial plaque at the church installed.
Inside is the church as well as the organ loft on the north side continuously kreuzgratgewölbt (groined vaulted) and baroquising monumentally designed. The interior of the church, such as altar, Stipes (thick post - substructur of the altar) with stepped retabel wall, tabernacles with reliefs, like a statue of Saint Josef, were created based on designs by the sculptor Heinrich Zita 1933. The wall paintings in the vaults and in the shallow round arched niches in the apse and the side altars are by the painter Sepp Zöchling from 1958.
de.wikipedia.org/wiki/Liste_der_denkmalgesch%C3%BCtzten_O...(Stadtteil)
de.wikipedia.org/wiki/Josefskirche_(St._P%C3%B6lten)
(further information is available by clicking on the link at the end of page!)
History of the City St. Pölten
In order to present concise history of the Lower Austrian capital is in the shop of the city museum a richly illustrated full version on CD-ROM.
Tip
On the occasion of the commemoration of the pogroms of November 1938, the Institute for Jewish History of Austria its virtual Memorbuch (Memory book) for the destroyed St. Pölten Jewish community since 10th November 2012 is putting online.
Prehistory
The time from which there is no written record is named after the main materials used for tools and weapons: Stone Age, Bronze Age, Iron Age. Using the latest technologies, archaeologists from archaeological finds and aerial photographs can trace a fairly detailed picture of life at that time. Especially for the time from the settling down of the People (New Stone Age), now practicing agriculture and animal husbandry, in the territory of St. Pölten lively settlement activity can be proved. In particular, cemeteries are important for the research, because the dead were laid in the grave everyday objects and jewelry, the forms of burial changing over time - which in turn gives the archeology valuable clues for the temporal determination. At the same time, prehistory of Sankt Pölten would not be half as good documented without the construction of the expressway S33 and other large buildings, where millions of cubic meters of earth were moved - under the watchful eyes of the Federal Monuments Office!
A final primeval chapter characterized the Celts, who settled about 450 BC our area and in addition to a new culture and religion also brought with them the potter's wheel. The kingdom of Noricum influenced till the penetration of the Romans the development in our area.
Roman period, migrations
The Romans conquered in 15 BC the Celtic Empire and established hereinafter the Roman province of Noricum. Borders were protected by military camp (forts), in the hinterland emerged civilian cities, almost all systematically laid out according to the same plan. The civil and commercial city Aelium Cetium, as St. Pölten was called (city law 121/122), consisted in the 4th Century already of heated stone houses, trade and craft originated thriving urban life, before the Romans in the first third of the 5th Century retreated to Italy.
The subsequent period went down as the Migration Period in official historiography, for which the settlement of the Sankt Pöltner downtown can not be proved. Cemeteries witness the residence of the Lombards in our area, later it was the Avars, extending their empire to the Enns.
The recent archaeological excavations on the Cathedral Square 2010/2011, in fact, the previous knowledge of St.Pölten colonization not have turned upside down but enriched by many details, whose full analysis and publication are expected in the near future.
Middle Ages
With the submission of the Avars by Charlemagne around 800 AD Christianity was gaining a foothold, the Bavarian Benedictine monastery of Tegernsee establishing a daughter house here - as founder are mentioned the brothers Adalbert and Ottokar - equipped with the relics of St. Hippolytus. The name St. Ypolit over the centuries should turn into Sankt Pölten. After the Hungarian wars and the resettlement of the monastery as Canons Regular of St. Augustine under the influence of Passau St. Pölten received mid-11th Century market rights.
In the second half of the 20th century historians stated that records in which the rights of citizens were held were to be qualified as Town Charters. Vienna is indeed already in 1137 as a city ("civitas") mentioned in a document, but the oldest Viennese city charter dates only from the year 1221, while the Bishop of Passau, Konrad, already in 1159 the St. Pöltnern secured:
A St. Pöltner citizen who has to answer to the court, has the right to make use of an "advocate".
He must not be forced to rid himself of the accusation by a judgment of God.
A St. Pöltner citizen may be convicted only by statements of fellow citizens, not by strangers.
From the 13th Century exercised a city judge appointed by the lord of the city the high and low jurisdiction as chairman of the council meetings and the Municipal Court, Inner and Outer Council supported him during the finding of justice. Venue for the public verdict was the in the 13th Century created new marketplace, the "Broad Market", now the town hall square. Originally square-shaped, it was only later to a rectangle reduced. Around it arose the market district, which together with the monastery district, the wood district and the Ledererviertel (quarter of the leather goods manufacturer) was protected by a double city wall.
The dependence of St. Pölten of the bishop of Passau is shown in the municipal coat of arms and the city seal. Based on the emblem of the heraldic animal of the Lord of the city, so the Bishop of Passau, it shows an upright standing wolf holding a crosier in its paw.
Modern Times
In the course of the armed conflict between the Emperor Frederick III . and King Matthias of Hungary pledged the Bishop of Passau the town on the Hungarian king. From 1485 stood Lower Austria as a whole under Hungarian rule. The most important document of this period is the awarding of the city coat of arms by King Matthias Corvinus in the year 1487. After the death of the opponents 1490 and 1493 could Frederick's son Maximilian reconquer Lower Austria. He considered St. Pölten as spoils of war and had no intention of returning it to the diocese of Passau. The city government has often been leased subsequently, for instance, to the family Wellenstein, and later to the families Trautson and Auersperg.
That St. Pölten now was a princely city, found its expression in the coat of arms letter of the King Ferdinand I. from 1538: From now on, the wolf had no crosier anymore, and the from the viewer's point of view left half showed the reverse Austrian shield, so silver-red-silver.
To the 16th Century also goes back the construction of St. Pöltner City Hall. The 1503 by judge and council acquired house was subsequently expanded, rebuilt, extended and provided with a tower.
A for the urban history research important picture, painted in 1623, has captured scenes of the peasant uprising of 1597, but also allows a view to the city and lets the viewer read some of the details of the then state of construction. The economic inconveniences of that time were only exacerbated by the Thirty Years War, at the end of which a fifth of the houses were uninhabited and the citizenry was impoverished.
Baroque
After the successful defense against the Turks in 1683, the economy started to recover and a significant building boom began. Lower Austria turned into the land of the baroque abbeys and monasteries, as it is familiar to us today.
In St. Pölten, the change of the cityscape is closely connected to the Baroque architect Jakob Prandtauer. In addition to the Baroquisation of the interior of the cathedral, a number of buildings in St. Pölten go to his account, so the reconstruction of the castle Ochsenburg, the erection of the Schwaighof and of the core building of the Institute of the Blessed Virgin Mary (Englische Fräuleins - English Maidens) - from 1706 the seat of the first school order of St.Pölten - as well as of several bourgeois houses.
Joseph Munggenast, nephew and co-worker of Prandtauer, completed the Baroquisation of the cathedral, he baroquised the facade of the town hall (1727) and numerous bourgeois houses and designed a bridge over the Traisen which existed until 1907. In the decoration of the church buildings were throughout Tyroleans collaborating, which Jakob Prandtauer had brought along from his homeland (Tyrol) to St. Pölten, for example, Paul Troger and Peter Widerin.
Maria Theresa and her son Joseph II: Their reforms in the city of the 18th Century also left a significant mark. School foundings as a result of compulsory education, the dissolution of the monasteries and hereinafter - from 1785 - the new role of St. Pölten as a bishop's seat are consequences of their policies.
1785 was also the year of a fundamental alteration of the old Council Constitution: The city judge was replaced by one magistrate consisting of five persons, at the head was a mayor. For the first mayor the painter Josef Hackl was chosen.
The 19th century
Despite the Napoleonic Wars - St. Pölten in 1805 and 1809 was occupied by the French - and despite the state bankruptcy of 1811, increased the number of businesses constantly, although the economic importance of the city for the time being did not go beyond the near vicinity.
Against the background of monitoring by the state secret police, which prevented any political commitment between the Congress of Vienna and the 1848 revolution, the citizens withdrew into private life. Sense of family, fostering of domestic music, prominent salon societies in which even a Franz Schubert socialized, or the construction of the city theater were visible signs of this attitude.
The economic upswing of the city did not begin until after the revolution of the year 1848. A prerequisite for this was the construction of the Empress Elisabeth Western Railway, moving Vienna, Linz, soon Salzburg, too, in a reachable distance. The city walls were pulled down, St. Pölten could unfold. The convenient traffic situation favored factory start-ups, and so arose a lace factory, a revolver factory, a soap factory or, for example, as a precursor of a future large-scale enterprise, the braid, ribbon and Strickgarnerzeugung (knitting yarn production) of Matthias Salcher in Harland.
In other areas, too, the Gründerzeit (years of rapid industrial expansion in Germany - and Austria) in Sankt Pölten was honouring its name: The city got schools, a hospital, gas lanterns, canalization, hot springs and summer bath.
The 20th century
At the beginning of the 20th Century the city experienced another burst of development, initiated by the construction of the power station in 1903, because electricity was the prerequisite for the settlement of large companies. In particular, the companies Voith and Glanzstoff and the main workshop of the Federal Railways attracted many workers. New Traisen bridge, tram, Mariazell Railway and other infrastructure buildings were erected; St. Pölten obtained a synagogue. The Art Nouveau made it repeatedly into the urban architecture - just think of the Olbrich House - and inspired also the painting, as exponents worth to be mentioned are Ernst Stöhr or Ferdinand Andri.
What the outbreak of the First World War in broad outlines meant for the monarchy, on a smaller scale also St. Pölten has felt. The city was heavily impacted by the deployment of army units, a POW camp, a military hospital and a sick bay. Industrial enterprises were partly converted into war production, partly closed. Unemployment, housing emergency and food shortages long after the war still were felt painfully.
The 1919 to mayor elected Social Democrat Hubert Schnofl after the war tried to raise the standard of living of the people by improving the social welfare and health care. The founding of a housing cooperative (Wohnungsgenossenschaft), the construction of the water line and the establishment of new factories were further attempts to stimulate the stiffening economy whose descent could not be stopped until 1932.
After the National Socialist regime had stirred false hopes and plunged the world into war, St. Pölten was no longer the city as it has been before. Not only the ten devastating bombings of the last year of the war had left its marks, also the restrictive persecution of Jews and political dissidents had torn holes in the structure of the population. Ten years of Russian occupation subsequently did the rest to traumatize the population, but at this time arose from the ruins a more modern St. Pölten, with the new Traisen bridge, district heating, schools.
This trend continued, an era of recovery and modernization made the economic miracle palpable. Already in 1972 was - even if largely as a result of incorporations - exceeded the 50.000-inhabitant-limit.
Elevation to capital status (capital of Lower Austria), 10 July 1986: No other event in this dimension could have become the booster detonation of an up to now ongoing development thrust. Since then in a big way new residential and commercial areas were opened up, built infrastructure constructions, schools and universities brought into being to enrich the educational landscape. East of the Old Town arose the governmental and cultural district, and the list of architects wears sonorous names such as Ernst Hoffmann (NÖ (Lower Austria) Landhaus; Klangturm), Klaus Kada (Festspielhaus), Hans Hollein (Shedhalle and Lower Austrian Provincial Museum), Karin Bily, Paul Katzberger and Michael Loudon ( NÖ State Library and NÖ State Archive).
European Diploma, European flag, badge of honor, Europe Price: Between 1996 and 2001, received St. Pölten numerous appreciations of its EU commitment - as a sort of recognition of the Council of Europe for the dissemination of the EU-idea through international town twinnings, a major Europe exhibition or, for example, the establishment and chair of the "Network of European medium-sized cities".
On the way into the 21st century
Just now happened and already history: What the St. Pöltnern as just experienced sticks in their minds, travelers and newcomers within a short time should be told. The theater and the hospital handing over to the province of Lower Austria, a new mayor always on the go, who was able to earn since 2004 already numerous laurels (Tags: polytechnic, downtown enhancement, building lease scheme, bus concept) - all the recent changes are just now condensed into spoken and written language in order to make, from now on, the history of the young provincial capital in the 3rd millennium nachlesbar (checkable).
www.st-poelten.gv.at/Content.Node/freizeit-kultur/kultur/...
HYPERFORGED HF-C7
Disk finish：Brushed side Polish
Rim outer finish：HighPolish
Rim inner finish：Anodized Black
F： 9.0J×20 SemiConcave
R：13.0J×21 DeepConcave
Pirelli P Zero
F：255/30/20 R：355/25/21
Lamborghini Aventador LP700-4
Auto Plaza Dank
Perfomance rest assured HYPERFORGED is utilizing the latest technology
and made entirely in the JAPAN． HYPER FORGED www.hyperforgedwheels.com
Una chiesa protestante di Confessione Helvetica, iglesia de las confesiones helvéticas, eglise des Confessions helvétiques, Church of Helvetic Confessions (Evangelische Kirche nach Helvetischem Bekenntnis H.B.) - Julius-Raab-Promenade/Hessstraße/Schießstattring
Evangelical Church
Object ID: 26025 Heßstraße 18
The construction in the neogothic style with east-facing tower facade to Julius Raab Promenade 8 and longitudinal facade to Heßstraße 18 was built in the years 1891-1892 according to the plans of the architect Ludwig Schöne. The tower has a pyramidal roof, the church tower facade has a pointed arch portal, a tympanum with relief Agnus Dei and a rose window. The facade with Ritzquaderung (joint ashlar masonry)*) has getreppte (stepped) buttresses, pointed arch windows and an eave with round-arched frieze.
Ritzquaderung*)
Building stone bond, in which the joints between the not absolutely smooth ashlar stones or boulders are tightened to produce a more perfect impression.
baurath.de/HTML_Forum/Thema-1072.html?Suchfeld=Quader&...
de.wikipedia.org/wiki/Liste_der_denkmalgesch%C3%BCtzten_O...(Stadtteil)
(further information is available by clicking on the link at the end of page!)
History of the City St. Pölten
In order to present concise history of the Lower Austrian capital is in the shop of the city museum a richly illustrated full version on CD-ROM.
Tip
On the occasion of the commemoration of the pogroms of November 1938, the Institute for Jewish History of Austria its virtual Memorbuch (Memory book) for the destroyed St. Pölten Jewish community since 10th November 2012 is putting online.
Prehistory
The time from which there is no written record is named after the main materials used for tools and weapons: Stone Age, Bronze Age, Iron Age. Using the latest technologies, archaeologists from archaeological finds and aerial photographs can trace a fairly detailed picture of life at that time. Especially for the time from the settling down of the People (New Stone Age), now practicing agriculture and animal husbandry, in the territory of St. Pölten lively settlement activity can be proved. In particular, cemeteries are important for the research, because the dead were laid in the grave everyday objects and jewelry, the forms of burial changing over time - which in turn gives the archeology valuable clues for the temporal determination. At the same time, prehistory of Sankt Pölten would not be half as good documented without the construction of the expressway S33 and other large buildings, where millions of cubic meters of earth were moved - under the watchful eyes of the Federal Monuments Office!
A final primeval chapter characterized the Celts, who settled about 450 BC our area and in addition to a new culture and religion also brought with them the potter's wheel. The kingdom of Noricum influenced till the penetration of the Romans the development in our area.
Roman period, migrations
The Romans conquered in 15 BC the Celtic Empire and established hereinafter the Roman province of Noricum. Borders were protected by military camp (forts), in the hinterland emerged civilian cities, almost all systematically laid out according to the same plan. The civil and commercial city Aelium Cetium, as St. Pölten was called (city law 121/122), consisted in the 4th Century already of heated stone houses, trade and craft originated thriving urban life, before the Romans in the first third of the 5th Century retreated to Italy.
The subsequent period went down as the Migration Period in official historiography, for which the settlement of the Sankt Pöltner downtown can not be proved. Cemeteries witness the residence of the Lombards in our area, later it was the Avars, extending their empire to the Enns.
The recent archaeological excavations on the Cathedral Square 2010/2011, in fact, the previous knowledge of St.Pölten colonization not have turned upside down but enriched by many details, whose full analysis and publication are expected in the near future.
Middle Ages
With the submission of the Avars by Charlemagne around 800 AD Christianity was gaining a foothold, the Bavarian Benedictine monastery of Tegernsee establishing a daughter house here - as founder are mentioned the brothers Adalbert and Ottokar - equipped with the relics of St. Hippolytus. The name St. Ypolit over the centuries should turn into Sankt Pölten. After the Hungarian wars and the resettlement of the monastery as Canons Regular of St. Augustine under the influence of Passau St. Pölten received mid-11th Century market rights.
In the second half of the 20th century historians stated that records in which the rights of citizens were held were to be qualified as Town Charters. Vienna is indeed already in 1137 as a city ("civitas") mentioned in a document, but the oldest Viennese city charter dates only from the year 1221, while the Bishop of Passau, Konrad, already in 1159 the St. Pöltnern secured:
A St. Pöltner citizen who has to answer to the court, has the right to make use of an "advocate".
He must not be forced to rid himself of the accusation by a judgment of God.
A St. Pöltner citizen may be convicted only by statements of fellow citizens, not by strangers.
From the 13th Century exercised a city judge appointed by the lord of the city the high and low jurisdiction as chairman of the council meetings and the Municipal Court, Inner and Outer Council supported him during the finding of justice. Venue for the public verdict was the in the 13th Century created new marketplace, the "Broad Market", now the town hall square. Originally square-shaped, it was only later to a rectangle reduced. Around it arose the market district, which together with the monastery district, the wood district and the Ledererviertel (quarter of the leather goods manufacturer) was protected by a double city wall.
The dependence of St. Pölten of the bishop of Passau is shown in the municipal coat of arms and the city seal. Based on the emblem of the heraldic animal of the Lord of the city, so the Bishop of Passau, it shows an upright standing wolf holding a crosier in its paw.
Modern Times
In the course of the armed conflict between the Emperor Frederick III . and King Matthias of Hungary pledged the Bishop of Passau the town on the Hungarian king. From 1485 stood Lower Austria as a whole under Hungarian rule. The most important document of this period is the awarding of the city coat of arms by King Matthias Corvinus in the year 1487. After the death of the opponents 1490 and 1493 could Frederick's son Maximilian reconquer Lower Austria. He considered St. Pölten as spoils of war and had no intention of returning it to the diocese of Passau. The city government has often been leased subsequently, for instance, to the family Wellenstein, and later to the families Trautson and Auersperg.
That St. Pölten now was a princely city, found its expression in the coat of arms letter of the King Ferdinand I. from 1538: From now on, the wolf had no crosier anymore, and the from the viewer's point of view left half showed the reverse Austrian shield, so silver-red-silver.
To the 16th Century also goes back the construction of St. Pöltner City Hall. The 1503 by judge and council acquired house was subsequently expanded, rebuilt, extended and provided with a tower.
A for the urban history research important picture, painted in 1623, has captured scenes of the peasant uprising of 1597, but also allows a view to the city and lets the viewer read some of the details of the then state of construction. The economic inconveniences of that time were only exacerbated by the Thirty Years War, at the end of which a fifth of the houses were uninhabited and the citizenry was impoverished.
Baroque
After the successful defense against the Turks in 1683, the economy started to recover and a significant building boom began. Lower Austria turned into the land of the baroque abbeys and monasteries, as it is familiar to us today.
In St. Pölten, the change of the cityscape is closely connected to the Baroque architect Jakob Prandtauer. In addition to the Baroquisation of the interior of the cathedral, a number of buildings in St. Pölten go to his account, so the reconstruction of the castle Ochsenburg, the erection of the Schwaighof and of the core building of the Institute of the Blessed Virgin Mary (Englische Fräuleins - English Maidens) - from 1706 the seat of the first school order of St.Pölten - as well as of several bourgeois houses.
Joseph Munggenast, nephew and co-worker of Prandtauer, completed the Baroquisation of the cathedral, he baroquised the facade of the town hall (1727) and numerous bourgeois houses and designed a bridge over the Traisen which existed until 1907. In the decoration of the church buildings were throughout Tyroleans collaborating, which Jakob Prandtauer had brought along from his homeland (Tyrol) to St. Pölten, for example, Paul Troger and Peter Widerin.
Maria Theresa and her son Joseph II: Their reforms in the city of the 18th Century also left a significant mark. School foundings as a result of compulsory education, the dissolution of the monasteries and hereinafter - from 1785 - the new role of St. Pölten as a bishop's seat are consequences of their policies.
1785 was also the year of a fundamental alteration of the old Council Constitution: The city judge was replaced by one magistrate consisting of five persons, at the head was a mayor. For the first mayor the painter Josef Hackl was chosen.
The 19th century
Despite the Napoleonic Wars - St. Pölten in 1805 and 1809 was occupied by the French - and despite the state bankruptcy of 1811, increased the number of businesses constantly, although the economic importance of the city for the time being did not go beyond the near vicinity.
Against the background of monitoring by the state secret police, which prevented any political commitment between the Congress of Vienna and the 1848 revolution, the citizens withdrew into private life. Sense of family, fostering of domestic music, prominent salon societies in which even a Franz Schubert socialized, or the construction of the city theater were visible signs of this attitude.
The economic upswing of the city did not begin until after the revolution of the year 1848. A prerequisite for this was the construction of the Empress Elisabeth Western Railway, moving Vienna, Linz, soon Salzburg, too, in a reachable distance. The city walls were pulled down, St. Pölten could unfold. The convenient traffic situation favored factory start-ups, and so arose a lace factory, a revolver factory, a soap factory or, for example, as a precursor of a future large-scale enterprise, the braid, ribbon and Strickgarnerzeugung (knitting yarn production) of Matthias Salcher in Harland.
In other areas, too, the Gründerzeit (years of rapid industrial expansion in Germany - and Austria) in Sankt Pölten was honouring its name: The city got schools, a hospital, gas lanterns, canalization, hot springs and summer bath.
The 20th century
At the beginning of the 20th Century the city experienced another burst of development, initiated by the construction of the power station in 1903, because electricity was the prerequisite for the settlement of large companies. In particular, the companies Voith and Glanzstoff and the main workshop of the Federal Railways attracted many workers. New Traisen bridge, tram, Mariazell Railway and other infrastructure buildings were erected; St. Pölten obtained a synagogue. The Art Nouveau made it repeatedly into the urban architecture - just think of the Olbrich House - and inspired also the painting, as exponents worth to be mentioned are Ernst Stöhr or Ferdinand Andri.
What the outbreak of the First World War in broad outlines meant for the monarchy, on a smaller scale also St. Pölten has felt. The city was heavily impacted by the deployment of army units, a POW camp, a military hospital and a sick bay. Industrial enterprises were partly converted into war production, partly closed. Unemployment, housing emergency and food shortages long after the war still were felt painfully.
The 1919 to mayor elected Social Democrat Hubert Schnofl after the war tried to raise the standard of living of the people by improving the social welfare and health care. The founding of a housing cooperative (Wohnungsgenossenschaft), the construction of the water line and the establishment of new factories were further attempts to stimulate the stiffening economy whose descent could not be stopped until 1932.
After the National Socialist regime had stirred false hopes and plunged the world into war, St. Pölten was no longer the city as it has been before. Not only the ten devastating bombings of the last year of the war had left its marks, also the restrictive persecution of Jews and political dissidents had torn holes in the structure of the population. Ten years of Russian occupation subsequently did the rest to traumatize the population, but at this time arose from the ruins a more modern St. Pölten, with the new Traisen bridge, district heating, schools.
This trend continued, an era of recovery and modernization made the economic miracle palpable. Already in 1972 was - even if largely as a result of incorporations - exceeded the 50.000-inhabitant-limit.
Elevation to capital status (capital of Lower Austria), 10 July 1986: No other event in this dimension could have become the booster detonation of an up to now ongoing development thrust. Since then in a big way new residential and commercial areas were opened up, built infrastructure constructions, schools and universities brought into being to enrich the educational landscape. East of the Old Town arose the governmental and cultural district, and the list of architects wears sonorous names such as Ernst Hoffmann (NÖ (Lower Austria) Landhaus; Klangturm), Klaus Kada (Festspielhaus), Hans Hollein (Shedhalle and Lower Austrian Provincial Museum), Karin Bily, Paul Katzberger and Michael Loudon ( NÖ State Library and NÖ State Archive).
European Diploma, European flag, badge of honor, Europe Price: Between 1996 and 2001, received St. Pölten numerous appreciations of its EU commitment - as a sort of recognition of the Council of Europe for the dissemination of the EU-idea through international town twinnings, a major Europe exhibition or, for example, the establishment and chair of the "Network of European medium-sized cities".
On the way into the 21st century
Just now happened and already history: What the St. Pöltnern as just experienced sticks in their minds, travelers and newcomers within a short time should be told. The theater and the hospital handing over to the province of Lower Austria, a new mayor always on the go, who was able to earn since 2004 already numerous laurels (Tags: polytechnic, downtown enhancement, building lease scheme, bus concept) - all the recent changes are just now condensed into spoken and written language in order to make, from now on, the history of the young provincial capital in the 3rd millennium nachlesbar (checkable).
www.st-poelten.gv.at/Content.Node/freizeit-kultur/kultur/...
Feeding the Fish at the Gadget Show Live 2010
These guys were amazing with their light show they performed at the Gadget Show Live 2010 at the NEC in Birmingham. I could not resist in taking some shots.
Here is their website www.feedingthefish.com/
Information
The Gadget Show is a British television series focusing on technology and is broadcast on Five. Originally a thirty minute show, it was extended to forty-five minutes, then later to one hour. The theme tune used is "In The Machine" by Barrie Gledden. Repeats have also aired on the digital channel Fiver and the satellite channel Bravo as well as Five's Internet on-demand service Demand Five. In Australia, it is aired on The Lifestyle Channel.
Each week, the show previews and reviews the latest gadgets, and broadcasts the latest technology news. The show is aimed at giving the mass consumer an insight into the gadget world and in addition, it aims to give enough information for the more "geeky" or knowledgable audience, but still making it accessible to the more casual viewer. The show has featured Blu-ray Discs, video cameras, MP3 players and other technologies. A segment showing viewers how to get the most out of their technology is also often included along with a competition to win anything from £5,000 to £28,000 worth of new gadgets. Each series usually contains a special episode focusing on a particular technology conference or expo. Past conferences include CeBIT and The Next Fest.
Series 5 saw a slight tweak in the format, with the three presenters hosting from a studio base, although a lot of the show still takes place outside of the studio. The studio sections are filmed at The Custard Factory on Gibb Street in Birmingham, UK. A recurring theme in the updated format is a regular challenge between Jason and Suzi (and occasionally Jon and / or Ortis), typically set around particular gadget(s) and their testing or use based around it. Another addition is that now the week's main featured gadget(s), typically reviewed by Jon, is given a 'G rating' from one to five. The seventh series, which started on 29 October 2007, saw the running increased to one hour. From series 8, there is also a new "Top 5" feature which consists of the Top 5 gadgets in a certain category. At the start of the eleventh series, a new item was introduced, called the "Wall of Fame" where Ortis or Suzi and Jason pick their favourite gadget from a particular category that they think changed the face of modern gadgetry, and then Jon picks the one to win and go up on the wall. There are also several other recurring features (such as 'Top 5' - looking at the best products from various categories; and 'The Focus Group' - testing products with various groups of people, who vote for their best one) which are featured in episodes on a semi-regular basis.
The show also offers a competiton, (answering a multiple choice question, by phone, SMS or postal entry) that gives the winner on some occasions up to 180 prizes.
For 2010, the programme received a rebrand centred on the typeface "Museo". This included refreshed titles and break bumpers.
Also in 2010, the show will be seeing the release of a supporting magazine called 'The Gadget Show Magazine'.
Using the latest technology of the time, the ensemble continues to thread its way through the old station yard at Porthmadog.
Wood Island Light, is an active lighthouse on the eastern edge of Wood Island in Saco Bay, Maine. The light is just outside the entrance to Biddeford Pool and the end of the Saco River. The lighthouse is a 47-foot (14 m) tall conical white tower constructed of granite rubble. The light itself sits 71 feet (22 m) above mean high water. It currently is automated and has an alternating green and white beacon every 10 seconds.
Wood Island Light is Maine's second oldest lighthouse (after Portland Head Light) and the nation's eleventh oldest. It was added to the National Register of Historic Places as Wood Island Light Station on January 21, 1988, reference number 87002274
Wood Island Light was constructed in 1808 under the orders of President Thomas Jefferson. The original tower was an octagonal wooden structure that had rotted out by the 1830s. In 1839 a granite tower was erected replacing the original wood structure. The current tower was constructed in 1858 as a renovation of the 1839 tower to allow for the installation of a 4th order Fresnel lens. Also built in 1858 were the current keepers dwellings which are still standing.
In 1960s the original lantern room was removed and an aerobeacon was installed instead. This however was deemed unsightly by locals and when the lighthouse was automated in 1986 a new lantern room was fabricated and installed on the lighthouse along with what was then the latest technology, a VRB-25 beacon. The VRB-25 was replaced by a VLB-44, an LED beacon with a service life of ten years, in 2013. The United States Coast Guard maintains the active beacon of the lighthouse, while The Friends of Wood Island Light, a non-profit organization, has assisted the Coast Guard by maintaining and restoring parts of the lighthouse and keepers en.wikipedia.org/wiki/Wood_Island_Lighthttps://en.wikiped... which they now own
++ ++ ++ ++ ++
image by Photo George
copyrighted: ©2015 GCheatle
all rights reserved
locator: GAC_4446 B&W
Pangaea-X is a test campaign that brings together geology, high-tech survey equipment and space exploration. Astronauts, scientists, operations experts and instrumentation engineers work side-by-side to advance European know-how of integrated human and robotics mission operations.
An extension of ESA’s Pangaea geology training, the training involves working with the latest technologies in instrumentation, navigation, remote sensing, 3D imaging and geoscience equipment.
The Pangaea-X crew explores the barren and dry landscape of Lanzarote in the Canary Islands, Spain, to prepare for the day when we set foot on other worlds. Known as the island of a thousand volcanoes, Lanzarote was chosen because of its geological similarity with Mars, such as a volcanic origin, mild sedimentary processes owing to a dry climate, hardly any vegetation and a well-preserved landscape.
Credits: ESA–A. Romeo
Gorgeous couple Reveka & Shay wedding portrait - beautifully captured by MaxMedia Photo & Video Studios / Valery Shpak
September 8, 2022
Captured with Phase One XF, IQ250, Schneider LS 80mm Blue Ring (remember, something blue for good luck 😉 )
@valeryshpakphotography
Link to high resolution in comments, enjoy remarkable quality of the latest technology in modern photography.
Crystal Skull Podracer, for the FBTB 2011 Podracer Challenge Building Contest
The non-Star Wars official licensed theme is Indiana Jones and the Kingdom of Crystal Skull.
The latest technology developed by the Soviet Union,
Colonel Doctor Irina Spalko managed to use extra-terrestrial power from two of the Crystal Skulls of Akator to create the first podracer on Earth in 1957
The Skull engines had psychic properties that can divert all racers in front of them.
Original prototype was to use LEGO Indiana Jones 7626 Jungle Cutter to build a military podracer. But imagine what Irina will develop in her psychic warfare research. So I changed the military green into the psychic blue, but remain the 7626 stickers and keep the 1950s engine appearance.
“Health Stories Book Two” of the Curriculum Foundation Series; Scott, Foresman and Co. 1934. Authors Anna B. Towse, Florence E. Matthews and William S. Gray. Illustrated by the following artists: Hildegard Blumenstiel, Studley Burroughs, Donn P. Crane, L. Kate Deal, Gordon Ertz, Keith Ward, Harold K. Welch, and Milo Winter.
Harley Davidson Dyna is the most stylish and comfortable motorcycle. In India the bike model is launched in two variants. The first one is Harley Davidson Dyna FXDB Street Bob and the second one is Harley Davidson FXDC Super Glide. The Harley Davidson Dyna has got the same traditional looks as it was in World War II, however, with latest technology. At the World War II time, the Harley Davidson DYNA was having military items like radios, ammunition boxes and rifle mounts.
Pond Inlet a small, predominantly Inuit, community situated on the shores of north Baffin Island overlooking the waters of Eclipse Sound across to the towering mountains and glaciers of Bylot Island and Sirmilik National park. Pond Inlet, or Mittimatalik as it is known by local residents, is a place of beauty and charm where the old traditions of Inuit Culture meet and blend with that of the latest technology. It was named in 1818 by explorer John Ross for John Pond an English astronomer.
As a tourist destination, Pond Inlet is considered one of Canada's "jewels of the North". It is one of the most picturesque communities with mountainous ranges viewable from all directions. Icebergs are most often accessible from the community within walking distance or a short snowmobile ride in winter.
This photo was taken in 1994 - scanned slide.
EXPLORED, March 16, 2010, #465
Disk finish：Brushed side Polish
Rim outer finish：HighPolish
Rim inner finish：Anodized Black
F： 9.0J×20 SemiConcave
R：13.0J×21 DeepConcave
Pirelli P Zero
F：255/30/20 R：355/25/21
Lamborghini Aventador LP700-4
Auto Plaza Dank
Perfomance rest assured HYPERFORGED is utilizing the latest technology
and made entirely in the JAPAN． HYPER FORGED www.hyperforgedwheels.com
HYPERFORGED HF-C7
Disk finish：Brushed side Polish
Rim outer finish：HighPolish
Rim inner finish：Anodized Black
F： 9.0J×20 SemiConcave
R：13.0J×21 DeepConcave
Pirelli P Zero
F：255/30/20 R：355/25/21
Lamborghini Aventador LP700-4
Auto Plaza Dank
Perfomance rest assured HYPERFORGED is utilizing the latest technology
and made entirely in the JAPAN． HYPER FORGED www.hyperforgedwheels.com
using the very latest technology
a combination of solar and wind power
chris madden
The Fabulous Fifties
ROBOGYM employs the latest technologies in weight burning and fat loss, guaranteeing results every time.
"Peg has one leg but can jump pretty fast. He is a war bot and is equipped with the latest technology. Flash, on the other hand, is a slow robot that packs a powerful punch with his laser arm."
Parish Church to the Holy Trinity and Franciscan Monastery
Object ID: 20593 Town Square 12
The late Baroque building, taking up the whole north side of the town square, is dominated by the Rococo façade. 1707 the Carmelite order at the request of the benefactor, Maria Antonia Montecuculi, settled down in St. Pölten, at the north side of the square the men convent should find its place. Although architect's plan and financial resources were available, was the start of construction not until 1757, there was missing the planning permission of Empress Maria Theresa. The church then was built to 1768 according to plans by Johann Pauli, the monastery was completed in 1773. Yet 10 years later, the monastery by Emperor Joseph II was repealed. Because of its strategic location, the church in 1785 became parish church, the pastoral care took over the by the dissolutions not affected Franciscan Order.
de.wikipedia.org/wiki/Liste_der_denkmalgesch%C3%BCtzten_O...(Stadtteil)
(further information is available by clicking on the link at the end of page!)
History of the City St. Pölten
In order to present concise history of the Lower Austrian capital is in the shop of the city museum a richly illustrated full version on CD-ROM.
Tip
On the occasion of the commemoration of the pogroms of November 1938, the Institute for Jewish History of Austria its virtual Memorbuch (Memory book) for the destroyed St. Pölten Jewish community since 10th November 2012 is putting online.
Prehistory
The time from which there is no written record is named after the main materials used for tools and weapons: Stone Age, Bronze Age, Iron Age. Using the latest technologies, archaeologists from archaeological finds and aerial photographs can trace a fairly detailed picture of life at that time. Especially for the time from the settling down of the People (New Stone Age), now practicing agriculture and animal husbandry, in the territory of St. Pölten lively settlement activity can be proved. In particular, cemeteries are important for the research, because the dead were laid in the grave everyday objects and jewelry, the forms of burial changing over time - which in turn gives the archeology valuable clues for the temporal determination. At the same time, prehistory of Sankt Pölten would not be half as good documented without the construction of the expressway S33 and other large buildings, where millions of cubic meters of earth were moved - under the watchful eyes of the Federal Monuments Office!
A final primeval chapter characterized the Celts, who settled about 450 BC our area and in addition to a new culture and religion also brought with them the potter's wheel. The kingdom of Noricum influenced till the penetration of the Romans the development in our area.
Roman period, migrations
The Romans conquered in 15 BC the Celtic Empire and established hereinafter the Roman province of Noricum. Borders were protected by military camp (forts), in the hinterland emerged civilian cities, almost all systematically laid out according to the same plan. The civil and commercial city Aelium Cetium, as St. Pölten was called (city law 121/122), consisted in the 4th Century already of heated stone houses, trade and craft originated thriving urban life, before the Romans in the first third of the 5th Century retreated to Italy.
The subsequent period went down as the Migration Period in official historiography, for which the settlement of the Sankt Pöltner downtown can not be proved. Cemeteries witness the residence of the Lombards in our area, later it was the Avars, extending their empire to the Enns.
The recent archaeological excavations on the Cathedral Square 2010/2011, in fact, the previous knowledge of St.Pölten colonization not have turned upside down but enriched by many details, whose full analysis and publication are expected in the near future.
Middle Ages
With the submission of the Avars by Charlemagne around 800 AD Christianity was gaining a foothold, the Bavarian Benedictine monastery of Tegernsee establishing a daughter house here - as founder are mentioned the brothers Adalbert and Ottokar - equipped with the relics of St. Hippolytus. The name St. Ypolit over the centuries should turn into Sankt Pölten. After the Hungarian wars and the resettlement of the monastery as Canons Regular of St. Augustine under the influence of Passau St. Pölten received mid-11th Century market rights.
In the second half of the 20th century historians stated that records in which the rights of citizens were held were to be qualified as Town Charters. Vienna is indeed already in 1137 as a city ("civitas") mentioned in a document, but the oldest Viennese city charter dates only from the year 1221, while the Bishop of Passau, Konrad, already in 1159 the St. Pöltnern secured:
A St. Pöltner citizen who has to answer to the court, has the right to make use of an "advocate".
He must not be forced to rid himself of the accusation by a judgment of God.
A St. Pöltner citizen may be convicted only by statements of fellow citizens, not by strangers.
From the 13th Century exercised a city judge appointed by the lord of the city the high and low jurisdiction as chairman of the council meetings and the Municipal Court, Inner and Outer Council supported him during the finding of justice. Venue for the public verdict was the in the 13th Century created new marketplace, the "Broad Market", now the town hall square. Originally square-shaped, it was only later to a rectangle reduced. Around it arose the market district, which together with the monastery district, the wood district and the Ledererviertel (quarter of the leather goods manufacturer) was protected by a double city wall.
The dependence of St. Pölten of the bishop of Passau is shown in the municipal coat of arms and the city seal. Based on the emblem of the heraldic animal of the Lord of the city, so the Bishop of Passau, it shows an upright standing wolf holding a crosier in its paw.
Modern Times
In the course of the armed conflict between the Emperor Frederick III . and King Matthias of Hungary pledged the Bishop of Passau the town on the Hungarian king. From 1485 stood Lower Austria as a whole under Hungarian rule. The most important document of this period is the awarding of the city coat of arms by King Matthias Corvinus in the year 1487. After the death of the opponents 1490 and 1493 could Frederick's son Maximilian reconquer Lower Austria. He considered St. Pölten as spoils of war and had no intention of returning it to the diocese of Passau. The city government has often been leased subsequently, for instance, to the family Wellenstein, and later to the families Trautson and Auersperg.
That St. Pölten now was a princely city, found its expression in the coat of arms letter of the King Ferdinand I. from 1538: From now on, the wolf had no crosier anymore, and the from the viewer's point of view left half showed the reverse Austrian shield, so silver-red-silver.
To the 16th Century also goes back the construction of St. Pöltner City Hall. The 1503 by judge and council acquired house was subsequently expanded, rebuilt, extended and provided with a tower.
A for the urban history research important picture, painted in 1623, has captured scenes of the peasant uprising of 1597, but also allows a view to the city and lets the viewer read some of the details of the then state of construction. The economic inconveniences of that time were only exacerbated by the Thirty Years War, at the end of which a fifth of the houses were uninhabited and the citizenry was impoverished.
Baroque
After the successful defense against the Turks in 1683, the economy started to recover and a significant building boom began. Lower Austria turned into the land of the baroque abbeys and monasteries, as it is familiar to us today.
In St. Pölten, the change of the cityscape is closely connected to the Baroque architect Jakob Prandtauer. In addition to the Baroquisation of the interior of the cathedral, a number of buildings in St. Pölten go to his account, so the reconstruction of the castle Ochsenburg, the erection of the Schwaighof and of the core building of the Institute of the Blessed Virgin Mary (Englische Fräuleins - English Maidens) - from 1706 the seat of the first school order of St.Pölten - as well as of several bourgeois houses.
Joseph Munggenast, nephew and co-worker of Prandtauer, completed the Baroquisation of the cathedral, he baroquised the facade of the town hall (1727) and numerous bourgeois houses and designed a bridge over the Traisen which existed until 1907. In the decoration of the church buildings were throughout Tyroleans collaborating, which Jakob Prandtauer had brought along from his homeland (Tyrol) to St. Pölten, for example, Paul Troger and Peter Widerin.
Maria Theresa and her son Joseph II: Their reforms in the city of the 18th Century also left a significant mark. School foundings as a result of compulsory education, the dissolution of the monasteries and hereinafter - from 1785 - the new role of St. Pölten as a bishop's seat are consequences of their policies.
1785 was also the year of a fundamental alteration of the old Council Constitution: The city judge was replaced by one magistrate consisting of five persons, at the head was a mayor. For the first mayor the painter Josef Hackl was chosen.
The 19th century
Despite the Napoleonic Wars - St. Pölten in 1805 and 1809 was occupied by the French - and despite the state bankruptcy of 1811, increased the number of businesses constantly, although the economic importance of the city for the time being did not go beyond the near vicinity.
Against the background of monitoring by the state secret police, which prevented any political commitment between the Congress of Vienna and the 1848 revolution, the citizens withdrew into private life. Sense of family, fostering of domestic music, prominent salon societies in which even a Franz Schubert socialized, or the construction of the city theater were visible signs of this attitude.
The economic upswing of the city did not begin until after the revolution of the year 1848. A prerequisite for this was the construction of the Empress Elisabeth Western Railway, moving Vienna, Linz, soon Salzburg, too, in a reachable distance. The city walls were pulled down, St. Pölten could unfold. The convenient traffic situation favored factory start-ups, and so arose a lace factory, a revolver factory, a soap factory or, for example, as a precursor of a future large-scale enterprise, the braid, ribbon and Strickgarnerzeugung (knitting yarn production) of Matthias Salcher in Harland.
In other areas, too, the Gründerzeit (years of rapid industrial expansion in Germany - and Austria) in Sankt Pölten was honouring its name: The city got schools, a hospital, gas lanterns, canalization, hot springs and summer bath.
The 20th century
At the beginning of the 20th Century the city experienced another burst of development, initiated by the construction of the power station in 1903, because electricity was the prerequisite for the settlement of large companies. In particular, the companies Voith and Glanzstoff and the main workshop of the Federal Railways attracted many workers. New Traisen bridge, tram, Mariazell Railway and other infrastructure buildings were erected; St. Pölten obtained a synagogue. The Art Nouveau made it repeatedly into the urban architecture - just think of the Olbrich House - and inspired also the painting, as exponents worth to be mentioned are Ernst Stöhr or Ferdinand Andri.
What the outbreak of the First World War in broad outlines meant for the monarchy, on a smaller scale also St. Pölten has felt. The city was heavily impacted by the deployment of army units, a POW camp, a military hospital and a sick bay. Industrial enterprises were partly converted into war production, partly closed. Unemployment, housing emergency and food shortages long after the war still were felt painfully.
The 1919 to mayor elected Social Democrat Hubert Schnofl after the war tried to raise the standard of living of the people by improving the social welfare and health care. The founding of a housing cooperative (Wohnungsgenossenschaft), the construction of the water line and the establishment of new factories were further attempts to stimulate the stiffening economy whose descent could not be stopped until 1932.
After the National Socialist regime had stirred false hopes and plunged the world into war, St. Pölten was no longer the city as it has been before. Not only the ten devastating bombings of the last year of the war had left its marks, also the restrictive persecution of Jews and political dissidents had torn holes in the structure of the population. Ten years of Russian occupation subsequently did the rest to traumatize the population, but at this time arose from the ruins a more modern St. Pölten, with the new Traisen bridge, district heating, schools.
This trend continued, an era of recovery and modernization made the economic miracle palpable. Already in 1972 was - even if largely as a result of incorporations - exceeded the 50.000-inhabitant-limit.
Elevation to capital status (capital of Lower Austria), 10 July 1986: No other event in this dimension could have become the booster detonation of an up to now ongoing development thrust. Since then in a big way new residential and commercial areas were opened up, built infrastructure constructions, schools and universities brought into being to enrich the educational landscape. East of the Old Town arose the governmental and cultural district, and the list of architects wears sonorous names such as Ernst Hoffmann (NÖ (Lower Austria) Landhaus; Klangturm), Klaus Kada (Festspielhaus), Hans Hollein (Shedhalle and Lower Austrian Provincial Museum), Karin Bily, Paul Katzberger and Michael Loudon ( NÖ State Library and NÖ State Archive).
European Diploma, European flag, badge of honor, Europe Price: Between 1996 and 2001, received St. Pölten numerous appreciations of its EU commitment - as a sort of recognition of the Council of Europe for the dissemination of the EU-idea through international town twinnings, a major Europe exhibition or, for example, the establishment and chair of the "Network of European medium-sized cities".
On the way into the 21st century
Just now happened and already history: What the St. Pöltnern as just experienced sticks in their minds, travelers and newcomers within a short time should be told. The theater and the hospital handing over to the province of Lower Austria, a new mayor always on the go, who was able to earn since 2004 already numerous laurels (Tags: polytechnic, downtown enhancement, building lease scheme, bus concept) - all the recent changes are just now condensed into spoken and written language in order to make, from now on, the history of the young provincial capital in the 3rd millennium nachlesbar (checkable).
www.st-poelten.gv.at/Content.Node/freizeit-kultur/kultur/...
I've splashed out on a new mobile mainly because the old one was getting very tired. Whilst this is not the latest technology the Samsung S6 does seem to be stable and proven technology including being able to take DNG photos, a phone doing raw! I'm impressed. However all these are taken using the camera's jpeg engine and have been sharpened slightly after resizing but little else done to them. This, of course, is St Mary's in Chesterfield.
Designed by Lewis Vulliamy and completed in 1870, it was reputed to be one of the most expensive houses constructed in the Victorian era.
Belonging to the Holford family, Westonbirt House replaced their Georgian mansion, which itself replaced an Elizabethan manor house. They also diverted the main road and relocated the village of Westonbirt a quarter of a mile away
The exterior is in an Elizabethan style, with a symmetrical main block and asymmetric wings, one of them containing a conservatory. The house was fitted with the latest technology such as gas lighting, central heating, fireproof construction and iron roofs. It is now a Grade I listed building, and used as a girls boarding school.
2 weeks on the motorbike across Europe, a day sight seeing and some strong beer. No wonder I look like I have lost the plot.
Dreher Breweries Ltd. is one of the three leading players in the Hungarian beer market. The brewery still operates in Kőbánya, where the beers are brewing with the latest technology methods in the buildings, which were restored to their original splendour.
Dreher Bak (a double bock), well it certainly hit the spot that day.
Taken from : www.flickr.com/photos/7-2-7
KCNA:
The working class, scientists and technicians in the railway transport field of the DPRK developed a six-axle alternating-current electric locomotive based on the latest technology.
They manufactured such core parts as traction converter, auxiliary converter and asynchronous traction motor by their own efforts and technology and completed the programs for smoothly controlling the traction power and speed of the locomotive and ensuring the safety and reliability of its running.
Through successful trial run in different railway sections like steep gradient and curve, its technological specifications were scientifically confirmed.
The development of Korean-style six-axle alternating-current electric locomotive makes it possible to further increase the country's railway transport capacity, and it is another progress in consolidating the foundation for self-supporting railway transport in keeping with the country's specific conditions.
Pyongyang Times:
A six-axle alternating-current electric locomotive with high capacity and improved traction force, speed and controllability has been developed in the DPRK.
The workers of the Kim Jong Thae Electric Locomotive Complex and scientists and technicians of Pyongyang University of Transport and the railway research institute and railway design institute of the Ministry of Railways completed thousands of designs and put forward dozens of technical innovation plans.
Such core parts as traction converter, auxiliary converter and asynchronous traction motor were made, making a breakthrough in the development of the locomotive.
Programs were also developed for smoothly controlling its traction power and speed and ensuring its safe and reliable running.
The test run of the locomotive in different railway sections with steep slopes and sharp curves scientifically confirmed its technical specifications.
HYPERFORGED HF-C7
Disk finish：Brushed side Polish
Rim outer finish：HighPolish
Rim inner finish：Anodized Black
F： 9.0J×20 SemiConcave
R：13.0J×21 DeepConcave
Pirelli P Zero
F：255/30/20 R：355/25/21
Lamborghini Aventador LP700-4
Auto Plaza Dank
Perfomance rest assured HYPERFORGED is utilizing the latest technology
and made entirely in the JAPAN． HYPER FORGED www.hyperforgedwheels.com
HYPERFORGED HF-C10
Disk finish：Brushed AnodizedBronze
Rim finish：AnodizeBronze
F： 9.5J×20 SemiConcave
R：12.5J×21 DeepConcave
Pirelli P Zero
F：265/30/20 R：355/25/21
Lamborghini Aventador LP700-4
Perfomance rest assured HYPERFORGED is utilizing the latest technology
and made entirely in the JAPAN． HYPER FORGED www.hyperforgedwheels.com
Police officers are logging on to fight crime as the latest technology is proving to be a winner in keeping Greater Manchester safe.
The roll out of smartphones, tablets and body worn video cameras to frontline officers started three months ago and is helping to keep officers out of police stations and in communities. The technology provides access to vital information at the touch of a button.
It has already helped officers to identify victims and offenders, and make decisions about the best action to take without having to return to the police station. Officers using the technology have said it is the best piece of equipment they have been given to help deliver policing effectively.
Chief Constable Ian Hopkins recently visited Rochdale where officers are now using both smartphones and tablets, and body worn video cameras in their efforts to tackle criminals and keep communities safe.
He said: “It was great to see the technology being used and already we can see the impact it has had. Officers are able to access the right information at the right time, and it means they can spend more time out in communities.
“This is a significant investment in policing in Greater Manchester and the feedback has been positive particularly as officers can take statements from people immediately. We are already seeing future opportunities as a result of using the technology.
“Both smartphones and body worn video cameras can also help to improve officer safety by allowing officers to make informed decisions about the action to take and capturing the behaviour of suspects.”
The development of technology within GMP is part of a programme of changes that are taking place to provide the best possible police service in the coming years.
To find out more about Greater Manchester Police please visit www.gmp.police.uk
You should call 101, the national non-emergency number, to report crime and other concerns that do not require an emergency response.
Always call 999 in an emergency, such as when a crime is in progress, violence is being used or threatened or where there is danger to life.
You can also call anonymously with information about crime to Crimestoppers on 0800 555 111. Crimestoppers is an independent charity who will not want your name, just your information. Your call will not be traced or recorded and you do not have to go to court or give a statement.
HYPERFORGED HF-C10
Disk finish：Brushed AnodizedBronze
Rim finish：AnodizeBronze
F： 9.5J×20 SemiConcave
R：12.5J×21 DeepConcave
Pirelli P Zero
F：265/30/20 R：355/25/21
Lamborghini Aventador LP700-4
Perfomance rest assured HYPERFORGED is utilizing the latest technology
and made entirely in the JAPAN． HYPER FORGED www.hyperforgedwheels.com