View allAll Photos Tagged KAILASA
A closer view of a richly carved panel in cave # 16 at Ellora, also called the Kailasa temple. This panel shows the battle of the Mahabharata= a Hindu epic. The Kailasa temple was carved out of a single rock, top down, and is considered the largest stone monolith structure in the world. Detailed notes about cave # 16 and the Ellora caves themselves appear elsewhere in this album. (see previous and subsequent pictures later in this album). (Ellora Caves, near Aurangabad, Maharashtra, Dec. 2022)
The Kailasa (Sanskrit: Kailāsanātha) temple is one of the largest rock-cut ancient Hindu temples located in Ellora, Maharashtra, India. It was built in the 8th century by the Rashtrakuta king Krishna I as attested in Kannada inscriptions. This is one of the 34 temples and monasteries known collectively as the Ellora Caves. These extend over more than 2 km, were dug side by side in the wall of a high basalt cliff in the complex located at Ellora. The Kailasa (cave 16) is a remarkable example of Dravidian architecture on account of its striking proportion, elaborate workmanship, architectural content, and sculptural ornamentation of rock-cut architecture. The temple was commissioned and completed between 757-783 CE, when Krishna I ruled the Rashtrakuta dynasty. It is designed to recall Mount Kailash, the home of Lord Shiva. It is a megalith carved out of one single rock.
METHOD OF CONSTRUCTION
The Kailasa Temple is notable for its vertical excavation - carvers started at the top of the original rock, and excavated downward. The traditional methods were rigidly followed by the master architect which could not have been achieved by excavating from the front. It is estimated that about 400,000 tons of rocks were scooped out over hundreds of years to construct this monolithic structure. From the chisel marks on walls of this temple, archeologists could conclude that three types of chisels were used to carve this temple.
ARCHITECTURE
All the carvings are at more than one level. A two-storeyed gateway opens to reveal a U-shaped courtyard. The courtyard is edged by a columned arcade three stories high. The arcades are punctuated by huge sculpted panels, and alcoves containing enormous sculptures of a variety of deities. Originally flying bridges of stone connected these galleries to central temple structures, but these have fallen.
Within the courtyard are two structures. As is traditional in Shiva temples, an image of the sacred bull Nandi fronts the central temple housing the lingam. In Cave 16, the Nandi Mandapa and main Shiva temple are each about 7 metres high, and built on two storeys. The lower stories of the Nandi Mandapa are both solid structures, decorated with elaborate illustrative carvings. The base of the temple has been carved to suggest that elephants are holding the structure aloft.
A rock bridge connects the Nandi Mandapa to the porch of the temple. The structure itself is a tall pyramidic South Indian temple. The shrine – complete with pillars, windows, inner and outer rooms, gathering halls, and an enormous stone lingam at its heart – is carved with niches, plasters, windows as well as images of deities, mithunas (erotic male and female figures) and other figures. Most of the deities at the left of the entrance are Shaivaite (followers of Lord Shiva) while on the right hand side the deities are Vaishnavaites (followers of Lord Vishnu).
There are two Dhwajasthambha (pillars with flagstaff) in the courtyard. The grand sculpture of Ravana attempting to lift Mount Kailasa, with his full might is a landmark in Indian art.
WIKIPEDIA
The Kailaśa temple: Cave 16, Ellora Caves
Kailasa temple features the use of multiple distinct architectural and sculptural styles. This, combined with its relatively large size, has led some scholars to believe that its construction spanned the reigns of multiple kings. Some of the temple reliefs feature the same style as the one used in the Dashavatara cave, which is located next to the temple. The Dashavatara cave contains an inscription of Krishna's predecessor and nephew Dantidurga (c. 735–756 CE). Based on this, art historian Hermann Goetz (1952) theorized that the construction of the Kailasa temple began during the reign of Dantidurga. Krishna consecrated its first complete version, which was much smaller than the present-day temple. According to Gotez, Dantidurga's role in the temple construction must have been deliberately suppressed, as Krishna sidelined Dantidurga's sons to claim the throne after his death. Based on analysis of the different styles, Goetz further hypothesized that the later Rashtrakuta rulers also extended the temple. These rulers include Dhruva Dharavarsha, Govinda III, Amoghavarsha I, and Krishna III. According to Goetz, the 11th century Paramara ruler Bhoja commissioned the elephant-lion frieze on the lower plinth during his invasion of Deccan, and added a new layer of paintings. Finally, Ahilyabai Holkar commissioned the last layer of paintings in the temple.
M. K. Dhavalikar (1982) analyzed the architecture of the temple, and concluded that the major part of the temple was completed during the reign of Krishna I, although he agreed with Goetz that some other parts of the temple complex can be dated to the later rulers. According to Dhavalikar, the following components were completed by Krishna: the main shrine, its gateway, the nandi-mandapa, the lower-storey, the elephant-lion frieze, the court elephants and the victory pillars. Dhavalikar admits that the most important sculpture of the temple, which depicts Ravana shaking the Kailasa mountain, appears to have been built after the main edifice. This sculpture is considered as one of the finest pieces of Indian art, and it is possible that the temple came to be known as Kailasa after it. Dhavalikar theorizes that this sculpture was carved around 3-4 decades after the completion of the main shrine, on the basis of its similarity to the tandava sculpture in the Lankeshvar cave. H. Goetz dated this relief to the reign of Krishna III. Like Goetz, Dhavalikar attributes some other structures in the temple complex to the later rulers. These include the Lankeshvar cave and the shrine of the river goddesses (possibly constructed during the reign of Govinda III). Dhavalikar further theorizes that the excavation of the Dashavatara cave, which began during the reign of Dantidurga, was completed during the reign of Krishna I. This explains the similarities between the sculptures in the two caves.
Dhavalikar pointed out that no major part of the monolithic temple appears to have been an afterthought: architectural evidence suggests that the entire temple was planned at the beginning. The main shrine is very similar to (although much larger than) the Virupaksha Temple at Pattadakal, which itself is a replica of the Kailasa temple at Kanchi. The Pattadakal Virupaksha Temple was commissioned by the Chalukyas of Badami to commemorate their victory over the Pallavas, who had constructed the Kailasa temple at Kanchi. According to the Virupaksha temple inscriptions, the Chalukyas brought the Pallava artists to Pattadakal after defeating the Pallavas. Dhavalikar theorizes that after defeating the Chalukyas, Krishna must have been impressed by the Virupaksha Temple located in their territory. As a result, he brought the sculptors and architects of the Virupaksha Temple (including some Pallava artists) to his own territory, and engaged them in the construction of the Kailasa temple at Ellora. If one assumes that the architects of the Virupaksha temple helped construct the Kailasa temple at Ellora, the construction of a massive temple during the reign of a single monarch does not seem impossible. The architects already had a blueprint and a prototype, which must have significantly reduced the effort involved in constructing a new temple. Moreover, quarrying a monolithic temple would have actually involved less effort than transporting large stones to build a new temple of similar size. Assuming that one person can cut around 4 cubic feet of rock every day, Dhavalikar estimated that 250 labourers would have managed to construct the Kailasa temple at Ellora within 5.5 years. The presence of non-Rashtrakuta styles in the temple can be attributed to the involvement of Chalukya and Pallava artists
NAIMISHARANYA
Naimisaranyam, also known as Neemsar, Nimsar or Nimkhar is a Hindu temple dedicated to Vishnu located in the north Indian state of Uttar Pradesh.[1] It is one of the Divya Desams, the 108 temples of Vishnu revered in Nalayira Divya Prabandham by the 12 poet saints, or Alwars. The temple is believed to be of significant antiquity with contributions at different times from the ruling kings. The temple is counted as one of the eight temples of Vishnu that self-manifested and is classified as Swayamvyaktha Kshetra. The temple is open till 6pm. The holy tank Chankra Kunda is associated with the temple and it is a pilgrimage centre where people take a holy dip during festive occasions
Sage Narada is believed to have searched for the best theertha (water body) in three worlds. He went to Kailasa, the abode of Shiva, then to Parkadal, the abode of Vishnu and finally landed in the water body in the Naimisha Forest. The central deity is also believed to be worshipped by sudharma and devas(celestical deities).[1][2]
Indra, the king of the devas, was once driven out of devaloka by an asuranamed Vritra. The asura was the recipient of a boon whereby he could not be killed by any weapon that was known till the date of his receiving the boon and additionally that no weapon made of wood or metal could harm him. Indra, who lost all hope of recovering his kingdom went to seek the aid of Vishnu. Vishnu revealed to Indra that only the weapon made from the bones of the sageDadhichi would defeat Vritra. Indra and the other devas therefore approached the sage, whom Indra had once beheaded, and asked him for his aid in defeating Vritra. Dadhichi acceded to the devas' request but said that he wished that he had time to go on a pilgrimage to all the holy rivers before he gave up his life for them. Indra then brought together all the waters of the holy rivers to Naimisaranya, thereby allowing the sage to have his wish fulfilled without a further loss of time. Dadhichi is then said to have given up his life by the art of yoga after which the devas fashioned the Vajrayudha from his spine. This weapon was then used to defeat the asura, allowing Indra to reclaim his place as the king of devaloka.[3]
As told in another legend, when sages were planning to perform penance, Brahma, the god of creation, brought out a ring from darba grass. He asked the sages to perform penance at the place where the ring fell, which is believed to be Naimisaranya. The sages performed penance and at the end of it, Vishnu appeared to the sages and accepted their offerings. It is believed that the forest still has Vishnu and all sages as trees
Naimisaranyam is located at the junction of the roads from Sitapur and Khairabad, 32 km from Sitapur and 42 km from the Sandila railway station, 45 miles north of Lucknow in Uttar Pradesh. Naimisaranya is also known as Nimsar or Nimkhar and is located on the left bank of the river Gomati.[5] The sacred well, namely Chakra Kunda is believed to have started from the weapon of Vishnu, Chakra. There are shrines dedicated to Chakranarayana, Ganesh, Rama, Lakshman
This place has also been visited by Sankaracharya[8] and the famous poet, Surdas resided here. Suthar, the author of 18 puranas is believed to have lived here and presented his sayings to the sages. The central deity is believed to have presided over the forest and hence the puja (rituals) are done to the forest.[2]
The temple is counted as one of the eight temples of Vishnu that self-manifested and is classified as Swayamvyaktha Kshetra.[9] (Seven other temples in the line are Srirangam Ranganathaswamy temple, Bhu Varaha Swamy temple, Tirumala Venkateswara Temple, and Vanamamalai Perumal Temple in South India and Saligrama, Pushkar and Badrinath Temple in North India).[10] Naimisaranya temple is revered in Nalayira Divya Prabandham, the 7th–9th century Vaishnava canon, by Thirumangai Azhwar in ten hymns. The temple is classified as a divyadesam, the 108 Vishnu temples that are revered in the Vaishnava canon.
Every new moon day, a large number of people purify themselves with a dip in the holy well. If the new moon falls on a Monday, it is believed that a holy bath in the well and offering to the presiding deity Lalitha will wash away all the sins committed in their lifetime
By Kailash Mansarovar Foundation Swami Bikash Giri www.sumeruparvat.com , www.naturalitem.com
The Kailasa (Sanskrit: Kailāsanātha) temple is one of the largest rock-cut ancient Hindu temples located in Ellora, Maharashtra, India. It was built in the 8th century by the Rashtrakuta king Krishna I as attested in Kannada inscriptions. This is one of the 34 temples and monasteries known collectively as the Ellora Caves. These extend over more than 2 km, were dug side by side in the wall of a high basalt cliff in the complex located at Ellora. The Kailasa (cave 16) is a remarkable example of Dravidian architecture on account of its striking proportion, elaborate workmanship, architectural content, and sculptural ornamentation of rock-cut architecture. The temple was commissioned and completed between 757-783 CE, when Krishna I ruled the Rashtrakuta dynasty. It is designed to recall Mount Kailash, the home of Lord Shiva. It is a megalith carved out of one single rock.
METHOD OF CONSTRUCTION
The Kailasa Temple is notable for its vertical excavation - carvers started at the top of the original rock, and excavated downward. The traditional methods were rigidly followed by the master architect which could not have been achieved by excavating from the front. It is estimated that about 400,000 tons of rocks were scooped out over hundreds of years to construct this monolithic structure. From the chisel marks on walls of this temple, archeologists could conclude that three types of chisels were used to carve this temple.
ARCHITECTURE
All the carvings are at more than one level. A two-storeyed gateway opens to reveal a U-shaped courtyard. The courtyard is edged by a columned arcade three stories high. The arcades are punctuated by huge sculpted panels, and alcoves containing enormous sculptures of a variety of deities. Originally flying bridges of stone connected these galleries to central temple structures, but these have fallen.
Within the courtyard are two structures. As is traditional in Shiva temples, an image of the sacred bull Nandi fronts the central temple housing the lingam. In Cave 16, the Nandi Mandapa and main Shiva temple are each about 7 metres high, and built on two storeys. The lower stories of the Nandi Mandapa are both solid structures, decorated with elaborate illustrative carvings. The base of the temple has been carved to suggest that elephants are holding the structure aloft.
A rock bridge connects the Nandi Mandapa to the porch of the temple. The structure itself is a tall pyramidic South Indian temple. The shrine – complete with pillars, windows, inner and outer rooms, gathering halls, and an enormous stone lingam at its heart – is carved with niches, plasters, windows as well as images of deities, mithunas (erotic male and female figures) and other figures. Most of the deities at the left of the entrance are Shaivaite (followers of Lord Shiva) while on the right hand side the deities are Vaishnavaites (followers of Lord Vishnu).
There are two Dhwajasthambha (pillars with flagstaff) in the courtyard. The grand sculpture of Ravana attempting to lift Mount Kailasa, with his full might is a landmark in Indian art.
WIKIPEDIA
The Kailasa (Sanskrit: Kailāsanātha) temple is one of the largest rock-cut ancient Hindu temples located in Ellora, Maharashtra, India. It was built in the 8th century by the Rashtrakuta king Krishna I as attested in Kannada inscriptions. This is one of the 34 temples and monasteries known collectively as the Ellora Caves. These extend over more than 2 km, were dug side by side in the wall of a high basalt cliff in the complex located at Ellora. The Kailasa (cave 16) is a remarkable example of Dravidian architecture on account of its striking proportion, elaborate workmanship, architectural content, and sculptural ornamentation of rock-cut architecture. The temple was commissioned and completed between 757-783 CE, when Krishna I ruled the Rashtrakuta dynasty. It is designed to recall Mount Kailash, the home of Lord Shiva. It is a megalith carved out of one single rock.
METHOD OF CONSTRUCTION
The Kailasa Temple is notable for its vertical excavation - carvers started at the top of the original rock, and excavated downward. The traditional methods were rigidly followed by the master architect which could not have been achieved by excavating from the front. It is estimated that about 400,000 tons of rocks were scooped out over hundreds of years to construct this monolithic structure. From the chisel marks on walls of this temple, archeologists could conclude that three types of chisels were used to carve this temple.
ARCHITECTURE
All the carvings are at more than one level. A two-storeyed gateway opens to reveal a U-shaped courtyard. The courtyard is edged by a columned arcade three stories high. The arcades are punctuated by huge sculpted panels, and alcoves containing enormous sculptures of a variety of deities. Originally flying bridges of stone connected these galleries to central temple structures, but these have fallen.
Within the courtyard are two structures. As is traditional in Shiva temples, an image of the sacred bull Nandi fronts the central temple housing the lingam. In Cave 16, the Nandi Mandapa and main Shiva temple are each about 7 metres high, and built on two storeys. The lower stories of the Nandi Mandapa are both solid structures, decorated with elaborate illustrative carvings. The base of the temple has been carved to suggest that elephants are holding the structure aloft.
A rock bridge connects the Nandi Mandapa to the porch of the temple. The structure itself is a tall pyramidic South Indian temple. The shrine – complete with pillars, windows, inner and outer rooms, gathering halls, and an enormous stone lingam at its heart – is carved with niches, plasters, windows as well as images of deities, mithunas (erotic male and female figures) and other figures. Most of the deities at the left of the entrance are Shaivaite (followers of Lord Shiva) while on the right hand side the deities are Vaishnavaites (followers of Lord Vishnu).
There are two Dhwajasthambha (pillars with flagstaff) in the courtyard. The grand sculpture of Ravana attempting to lift Mount Kailasa, with his full might is a landmark in Indian art.
WIKIPEDIA
The Kailasa (Sanskrit: Kailāsanātha) temple is one of the largest rock-cut ancient Hindu temples located in Ellora, Maharashtra, India. It was built in the 8th century by the Rashtrakuta king Krishna I as attested in Kannada inscriptions. This is one of the 34 temples and monasteries known collectively as the Ellora Caves. These extend over more than 2 km, were dug side by side in the wall of a high basalt cliff in the complex located at Ellora. The Kailasa (cave 16) is a remarkable example of Dravidian architecture on account of its striking proportion, elaborate workmanship, architectural content, and sculptural ornamentation of rock-cut architecture. The temple was commissioned and completed between 757-783 CE, when Krishna I ruled the Rashtrakuta dynasty. It is designed to recall Mount Kailash, the home of Lord Shiva. It is a megalith carved out of one single rock.
METHOD OF CONSTRUCTION
The Kailasa Temple is notable for its vertical excavation - carvers started at the top of the original rock, and excavated downward. The traditional methods were rigidly followed by the master architect which could not have been achieved by excavating from the front. It is estimated that about 400,000 tons of rocks were scooped out over hundreds of years to construct this monolithic structure. From the chisel marks on walls of this temple, archeologists could conclude that three types of chisels were used to carve this temple.
ARCHITECTURE
All the carvings are at more than one level. A two-storeyed gateway opens to reveal a U-shaped courtyard. The courtyard is edged by a columned arcade three stories high. The arcades are punctuated by huge sculpted panels, and alcoves containing enormous sculptures of a variety of deities. Originally flying bridges of stone connected these galleries to central temple structures, but these have fallen.
Within the courtyard are two structures. As is traditional in Shiva temples, an image of the sacred bull Nandi fronts the central temple housing the lingam. In Cave 16, the Nandi Mandapa and main Shiva temple are each about 7 metres high, and built on two storeys. The lower stories of the Nandi Mandapa are both solid structures, decorated with elaborate illustrative carvings. The base of the temple has been carved to suggest that elephants are holding the structure aloft.
A rock bridge connects the Nandi Mandapa to the porch of the temple. The structure itself is a tall pyramidic South Indian temple. The shrine – complete with pillars, windows, inner and outer rooms, gathering halls, and an enormous stone lingam at its heart – is carved with niches, plasters, windows as well as images of deities, mithunas (erotic male and female figures) and other figures. Most of the deities at the left of the entrance are Shaivaite (followers of Lord Shiva) while on the right hand side the deities are Vaishnavaites (followers of Lord Vishnu).
There are two Dhwajasthambha (pillars with flagstaff) in the courtyard. The grand sculpture of Ravana attempting to lift Mount Kailasa, with his full might is a landmark in Indian art.
WIKIPEDIA
The Kailasa (Sanskrit: Kailāsanātha) temple is one of the largest rock-cut ancient Hindu temples located in Ellora, Maharashtra, India. It was built in the 8th century by the Rashtrakuta king Krishna I as attested in Kannada inscriptions. This is one of the 34 temples and monasteries known collectively as the Ellora Caves. These extend over more than 2 km, were dug side by side in the wall of a high basalt cliff in the complex located at Ellora. The Kailasa (cave 16) is a remarkable example of Dravidian architecture on account of its striking proportion, elaborate workmanship, architectural content, and sculptural ornamentation of rock-cut architecture. The temple was commissioned and completed between 757-783 CE, when Krishna I ruled the Rashtrakuta dynasty. It is designed to recall Mount Kailash, the home of Lord Shiva. It is a megalith carved out of one single rock.
METHOD OF CONSTRUCTION
The Kailasa Temple is notable for its vertical excavation - carvers started at the top of the original rock, and excavated downward. The traditional methods were rigidly followed by the master architect which could not have been achieved by excavating from the front. It is estimated that about 400,000 tons of rocks were scooped out over hundreds of years to construct this monolithic structure. From the chisel marks on walls of this temple, archeologists could conclude that three types of chisels were used to carve this temple.
ARCHITECTURE
All the carvings are at more than one level. A two-storeyed gateway opens to reveal a U-shaped courtyard. The courtyard is edged by a columned arcade three stories high. The arcades are punctuated by huge sculpted panels, and alcoves containing enormous sculptures of a variety of deities. Originally flying bridges of stone connected these galleries to central temple structures, but these have fallen.
Within the courtyard are two structures. As is traditional in Shiva temples, an image of the sacred bull Nandi fronts the central temple housing the lingam. In Cave 16, the Nandi Mandapa and main Shiva temple are each about 7 metres high, and built on two storeys. The lower stories of the Nandi Mandapa are both solid structures, decorated with elaborate illustrative carvings. The base of the temple has been carved to suggest that elephants are holding the structure aloft.
A rock bridge connects the Nandi Mandapa to the porch of the temple. The structure itself is a tall pyramidic South Indian temple. The shrine – complete with pillars, windows, inner and outer rooms, gathering halls, and an enormous stone lingam at its heart – is carved with niches, plasters, windows as well as images of deities, mithunas (erotic male and female figures) and other figures. Most of the deities at the left of the entrance are Shaivaite (followers of Lord Shiva) while on the right hand side the deities are Vaishnavaites (followers of Lord Vishnu).
There are two Dhwajasthambha (pillars with flagstaff) in the courtyard. The grand sculpture of Ravana attempting to lift Mount Kailasa, with his full might is a landmark in Indian art.
WIKIPEDIA
The Kailasa (Sanskrit: Kailāsanātha) temple is one of the largest rock-cut ancient Hindu temples located in Ellora, Maharashtra, India. It was built in the 8th century by the Rashtrakuta king Krishna I as attested in Kannada inscriptions. This is one of the 34 temples and monasteries known collectively as the Ellora Caves. These extend over more than 2 km, were dug side by side in the wall of a high basalt cliff in the complex located at Ellora. The Kailasa (cave 16) is a remarkable example of Dravidian architecture on account of its striking proportion, elaborate workmanship, architectural content, and sculptural ornamentation of rock-cut architecture. The temple was commissioned and completed between 757-783 CE, when Krishna I ruled the Rashtrakuta dynasty. It is designed to recall Mount Kailash, the home of Lord Shiva. It is a megalith carved out of one single rock.
METHOD OF CONSTRUCTION
The Kailasa Temple is notable for its vertical excavation - carvers started at the top of the original rock, and excavated downward. The traditional methods were rigidly followed by the master architect which could not have been achieved by excavating from the front. It is estimated that about 400,000 tons of rocks were scooped out over hundreds of years to construct this monolithic structure. From the chisel marks on walls of this temple, archeologists could conclude that three types of chisels were used to carve this temple.
ARCHITECTURE
All the carvings are at more than one level. A two-storeyed gateway opens to reveal a U-shaped courtyard. The courtyard is edged by a columned arcade three stories high. The arcades are punctuated by huge sculpted panels, and alcoves containing enormous sculptures of a variety of deities. Originally flying bridges of stone connected these galleries to central temple structures, but these have fallen.
Within the courtyard are two structures. As is traditional in Shiva temples, an image of the sacred bull Nandi fronts the central temple housing the lingam. In Cave 16, the Nandi Mandapa and main Shiva temple are each about 7 metres high, and built on two storeys. The lower stories of the Nandi Mandapa are both solid structures, decorated with elaborate illustrative carvings. The base of the temple has been carved to suggest that elephants are holding the structure aloft.
A rock bridge connects the Nandi Mandapa to the porch of the temple. The structure itself is a tall pyramidic South Indian temple. The shrine – complete with pillars, windows, inner and outer rooms, gathering halls, and an enormous stone lingam at its heart – is carved with niches, plasters, windows as well as images of deities, mithunas (erotic male and female figures) and other figures. Most of the deities at the left of the entrance are Shaivaite (followers of Lord Shiva) while on the right hand side the deities are Vaishnavaites (followers of Lord Vishnu).
There are two Dhwajasthambha (pillars with flagstaff) in the courtyard. The grand sculpture of Ravana attempting to lift Mount Kailasa, with his full might is a landmark in Indian art.
WIKIPEDIA
Cave 16, also known as the Kailasa or the Kailasanatha, is the unrivaled centerpiece of Ellora. This is designed to recall Mount Kailash, the abode of Lord Shiva – looks like a freestanding, multi-storeyed temple complex, but it was carved out of one single rock, and covers an area double the size of Parthenon in Athens.All the carvings are done in more than one level. A two-storeyed gateway resembling a South Indian gopuram opens to reveal a U-shaped courtyard. The courtyard is edged by columned galleries three storeys high. The galleries are punctuated by huge sculpted panels, and alcoves containing enormous sculptures of a variety of deities. Originally flying bridges of stone connected these galleries to central temple structures, but these have fallen.
Plz see the others also.
The Kailasa (Sanskrit: Kailāsanātha) temple is one of the largest rock-cut ancient Hindu temples located in Ellora, Maharashtra, India. It was built in the 8th century by the Rashtrakuta king Krishna I as attested in Kannada inscriptions. This is one of the 34 temples and monasteries known collectively as the Ellora Caves. These extend over more than 2 km, were dug side by side in the wall of a high basalt cliff in the complex located at Ellora. The Kailasa (cave 16) is a remarkable example of Dravidian architecture on account of its striking proportion, elaborate workmanship, architectural content, and sculptural ornamentation of rock-cut architecture. The temple was commissioned and completed between 757-783 CE, when Krishna I ruled the Rashtrakuta dynasty. It is designed to recall Mount Kailash, the home of Lord Shiva. It is a megalith carved out of one single rock.
METHOD OF CONSTRUCTION
The Kailasa Temple is notable for its vertical excavation - carvers started at the top of the original rock, and excavated downward. The traditional methods were rigidly followed by the master architect which could not have been achieved by excavating from the front. It is estimated that about 400,000 tons of rocks were scooped out over hundreds of years to construct this monolithic structure. From the chisel marks on walls of this temple, archeologists could conclude that three types of chisels were used to carve this temple.
ARCHITECTURE
All the carvings are at more than one level. A two-storeyed gateway opens to reveal a U-shaped courtyard. The courtyard is edged by a columned arcade three stories high. The arcades are punctuated by huge sculpted panels, and alcoves containing enormous sculptures of a variety of deities. Originally flying bridges of stone connected these galleries to central temple structures, but these have fallen.
Within the courtyard are two structures. As is traditional in Shiva temples, an image of the sacred bull Nandi fronts the central temple housing the lingam. In Cave 16, the Nandi Mandapa and main Shiva temple are each about 7 metres high, and built on two storeys. The lower stories of the Nandi Mandapa are both solid structures, decorated with elaborate illustrative carvings. The base of the temple has been carved to suggest that elephants are holding the structure aloft.
A rock bridge connects the Nandi Mandapa to the porch of the temple. The structure itself is a tall pyramidic South Indian temple. The shrine – complete with pillars, windows, inner and outer rooms, gathering halls, and an enormous stone lingam at its heart – is carved with niches, plasters, windows as well as images of deities, mithunas (erotic male and female figures) and other figures. Most of the deities at the left of the entrance are Shaivaite (followers of Lord Shiva) while on the right hand side the deities are Vaishnavaites (followers of Lord Vishnu).
There are two Dhwajasthambha (pillars with flagstaff) in the courtyard. The grand sculpture of Ravana attempting to lift Mount Kailasa, with his full might is a landmark in Indian art.
WIKIPEDIA
The Kailasa (Sanskrit: Kailāsanātha) temple is one of the largest rock-cut ancient Hindu temples located in Ellora, Maharashtra, India. It was built in the 8th century by the Rashtrakuta king Krishna I as attested in Kannada inscriptions. This is one of the 34 temples and monasteries known collectively as the Ellora Caves. These extend over more than 2 km, were dug side by side in the wall of a high basalt cliff in the complex located at Ellora. The Kailasa (cave 16) is a remarkable example of Dravidian architecture on account of its striking proportion, elaborate workmanship, architectural content, and sculptural ornamentation of rock-cut architecture. The temple was commissioned and completed between 757-783 CE, when Krishna I ruled the Rashtrakuta dynasty. It is designed to recall Mount Kailash, the home of Lord Shiva. It is a megalith carved out of one single rock.
METHOD OF CONSTRUCTION
The Kailasa Temple is notable for its vertical excavation - carvers started at the top of the original rock, and excavated downward. The traditional methods were rigidly followed by the master architect which could not have been achieved by excavating from the front. It is estimated that about 400,000 tons of rocks were scooped out over hundreds of years to construct this monolithic structure. From the chisel marks on walls of this temple, archeologists could conclude that three types of chisels were used to carve this temple.
ARCHITECTURE
All the carvings are at more than one level. A two-storeyed gateway opens to reveal a U-shaped courtyard. The courtyard is edged by a columned arcade three stories high. The arcades are punctuated by huge sculpted panels, and alcoves containing enormous sculptures of a variety of deities. Originally flying bridges of stone connected these galleries to central temple structures, but these have fallen.
Within the courtyard are two structures. As is traditional in Shiva temples, an image of the sacred bull Nandi fronts the central temple housing the lingam. In Cave 16, the Nandi Mandapa and main Shiva temple are each about 7 metres high, and built on two storeys. The lower stories of the Nandi Mandapa are both solid structures, decorated with elaborate illustrative carvings. The base of the temple has been carved to suggest that elephants are holding the structure aloft.
A rock bridge connects the Nandi Mandapa to the porch of the temple. The structure itself is a tall pyramidic South Indian temple. The shrine – complete with pillars, windows, inner and outer rooms, gathering halls, and an enormous stone lingam at its heart – is carved with niches, plasters, windows as well as images of deities, mithunas (erotic male and female figures) and other figures. Most of the deities at the left of the entrance are Shaivaite (followers of Lord Shiva) while on the right hand side the deities are Vaishnavaites (followers of Lord Vishnu).
There are two Dhwajasthambha (pillars with flagstaff) in the courtyard. The grand sculpture of Ravana attempting to lift Mount Kailasa, with his full might is a landmark in Indian art.
WIKIPEDIA
The Kailasa (Sanskrit: Kailāsanātha) temple is one of the largest rock-cut ancient Hindu temples located in Ellora, Maharashtra, India. It was built in the 8th century by the Rashtrakuta king Krishna I as attested in Kannada inscriptions. This is one of the 34 temples and monasteries known collectively as the Ellora Caves. These extend over more than 2 km, were dug side by side in the wall of a high basalt cliff in the complex located at Ellora. The Kailasa (cave 16) is a remarkable example of Dravidian architecture on account of its striking proportion, elaborate workmanship, architectural content, and sculptural ornamentation of rock-cut architecture. The temple was commissioned and completed between 757-783 CE, when Krishna I ruled the Rashtrakuta dynasty. It is designed to recall Mount Kailash, the home of Lord Shiva. It is a megalith carved out of one single rock.
METHOD OF CONSTRUCTION
The Kailasa Temple is notable for its vertical excavation - carvers started at the top of the original rock, and excavated downward. The traditional methods were rigidly followed by the master architect which could not have been achieved by excavating from the front. It is estimated that about 400,000 tons of rocks were scooped out over hundreds of years to construct this monolithic structure. From the chisel marks on walls of this temple, archeologists could conclude that three types of chisels were used to carve this temple.
ARCHITECTURE
All the carvings are at more than one level. A two-storeyed gateway opens to reveal a U-shaped courtyard. The courtyard is edged by a columned arcade three stories high. The arcades are punctuated by huge sculpted panels, and alcoves containing enormous sculptures of a variety of deities. Originally flying bridges of stone connected these galleries to central temple structures, but these have fallen.
Within the courtyard are two structures. As is traditional in Shiva temples, an image of the sacred bull Nandi fronts the central temple housing the lingam. In Cave 16, the Nandi Mandapa and main Shiva temple are each about 7 metres high, and built on two storeys. The lower stories of the Nandi Mandapa are both solid structures, decorated with elaborate illustrative carvings. The base of the temple has been carved to suggest that elephants are holding the structure aloft.
A rock bridge connects the Nandi Mandapa to the porch of the temple. The structure itself is a tall pyramidic South Indian temple. The shrine – complete with pillars, windows, inner and outer rooms, gathering halls, and an enormous stone lingam at its heart – is carved with niches, plasters, windows as well as images of deities, mithunas (erotic male and female figures) and other figures. Most of the deities at the left of the entrance are Shaivaite (followers of Lord Shiva) while on the right hand side the deities are Vaishnavaites (followers of Lord Vishnu).
There are two Dhwajasthambha (pillars with flagstaff) in the courtyard. The grand sculpture of Ravana attempting to lift Mount Kailasa, with his full might is a landmark in Indian art.
WIKIPEDIA
The Kailasa (Sanskrit: Kailāsanātha) temple is one of the largest rock-cut ancient Hindu temples located in Ellora, Maharashtra, India. It was built in the 8th century by the Rashtrakuta king Krishna I as attested in Kannada inscriptions. This is one of the 34 temples and monasteries known collectively as the Ellora Caves. These extend over more than 2 km, were dug side by side in the wall of a high basalt cliff in the complex located at Ellora. The Kailasa (cave 16) is a remarkable example of Dravidian architecture on account of its striking proportion, elaborate workmanship, architectural content, and sculptural ornamentation of rock-cut architecture. The temple was commissioned and completed between 757-783 CE, when Krishna I ruled the Rashtrakuta dynasty. It is designed to recall Mount Kailash, the home of Lord Shiva. It is a megalith carved out of one single rock.
METHOD OF CONSTRUCTION
The Kailasa Temple is notable for its vertical excavation - carvers started at the top of the original rock, and excavated downward. The traditional methods were rigidly followed by the master architect which could not have been achieved by excavating from the front. It is estimated that about 400,000 tons of rocks were scooped out over hundreds of years to construct this monolithic structure. From the chisel marks on walls of this temple, archeologists could conclude that three types of chisels were used to carve this temple.
ARCHITECTURE
All the carvings are at more than one level. A two-storeyed gateway opens to reveal a U-shaped courtyard. The courtyard is edged by a columned arcade three stories high. The arcades are punctuated by huge sculpted panels, and alcoves containing enormous sculptures of a variety of deities. Originally flying bridges of stone connected these galleries to central temple structures, but these have fallen.
Within the courtyard are two structures. As is traditional in Shiva temples, an image of the sacred bull Nandi fronts the central temple housing the lingam. In Cave 16, the Nandi Mandapa and main Shiva temple are each about 7 metres high, and built on two storeys. The lower stories of the Nandi Mandapa are both solid structures, decorated with elaborate illustrative carvings. The base of the temple has been carved to suggest that elephants are holding the structure aloft.
A rock bridge connects the Nandi Mandapa to the porch of the temple. The structure itself is a tall pyramidic South Indian temple. The shrine – complete with pillars, windows, inner and outer rooms, gathering halls, and an enormous stone lingam at its heart – is carved with niches, plasters, windows as well as images of deities, mithunas (erotic male and female figures) and other figures. Most of the deities at the left of the entrance are Shaivaite (followers of Lord Shiva) while on the right hand side the deities are Vaishnavaites (followers of Lord Vishnu).
There are two Dhwajasthambha (pillars with flagstaff) in the courtyard. The grand sculpture of Ravana attempting to lift Mount Kailasa, with his full might is a landmark in Indian art.
WIKIPEDIA
The Kailasa (Sanskrit: Kailāsanātha) temple is one of the largest rock-cut ancient Hindu temples located in Ellora, Maharashtra, India. It was built in the 8th century by the Rashtrakuta king Krishna I as attested in Kannada inscriptions. This is one of the 34 temples and monasteries known collectively as the Ellora Caves. These extend over more than 2 km, were dug side by side in the wall of a high basalt cliff in the complex located at Ellora. The Kailasa (cave 16) is a remarkable example of Dravidian architecture on account of its striking proportion, elaborate workmanship, architectural content, and sculptural ornamentation of rock-cut architecture. The temple was commissioned and completed between 757-783 CE, when Krishna I ruled the Rashtrakuta dynasty. It is designed to recall Mount Kailash, the home of Lord Shiva. It is a megalith carved out of one single rock.
METHOD OF CONSTRUCTION
The Kailasa Temple is notable for its vertical excavation - carvers started at the top of the original rock, and excavated downward. The traditional methods were rigidly followed by the master architect which could not have been achieved by excavating from the front. It is estimated that about 400,000 tons of rocks were scooped out over hundreds of years to construct this monolithic structure. From the chisel marks on walls of this temple, archeologists could conclude that three types of chisels were used to carve this temple.
ARCHITECTURE
All the carvings are at more than one level. A two-storeyed gateway opens to reveal a U-shaped courtyard. The courtyard is edged by a columned arcade three stories high. The arcades are punctuated by huge sculpted panels, and alcoves containing enormous sculptures of a variety of deities. Originally flying bridges of stone connected these galleries to central temple structures, but these have fallen.
Within the courtyard are two structures. As is traditional in Shiva temples, an image of the sacred bull Nandi fronts the central temple housing the lingam. In Cave 16, the Nandi Mandapa and main Shiva temple are each about 7 metres high, and built on two storeys. The lower stories of the Nandi Mandapa are both solid structures, decorated with elaborate illustrative carvings. The base of the temple has been carved to suggest that elephants are holding the structure aloft.
A rock bridge connects the Nandi Mandapa to the porch of the temple. The structure itself is a tall pyramidic South Indian temple. The shrine – complete with pillars, windows, inner and outer rooms, gathering halls, and an enormous stone lingam at its heart – is carved with niches, plasters, windows as well as images of deities, mithunas (erotic male and female figures) and other figures. Most of the deities at the left of the entrance are Shaivaite (followers of Lord Shiva) while on the right hand side the deities are Vaishnavaites (followers of Lord Vishnu).
There are two Dhwajasthambha (pillars with flagstaff) in the courtyard. The grand sculpture of Ravana attempting to lift Mount Kailasa, with his full might is a landmark in Indian art.
WIKIPEDIA
The Kailasa (Sanskrit: Kailāsanātha) temple is one of the largest rock-cut ancient Hindu temples located in Ellora, Maharashtra, India. It was built in the 8th century by the Rashtrakuta king Krishna I as attested in Kannada inscriptions. This is one of the 34 temples and monasteries known collectively as the Ellora Caves. These extend over more than 2 km, were dug side by side in the wall of a high basalt cliff in the complex located at Ellora. The Kailasa (cave 16) is a remarkable example of Dravidian architecture on account of its striking proportion, elaborate workmanship, architectural content, and sculptural ornamentation of rock-cut architecture. The temple was commissioned and completed between 757-783 CE, when Krishna I ruled the Rashtrakuta dynasty. It is designed to recall Mount Kailash, the home of Lord Shiva. It is a megalith carved out of one single rock.
METHOD OF CONSTRUCTION
The Kailasa Temple is notable for its vertical excavation - carvers started at the top of the original rock, and excavated downward. The traditional methods were rigidly followed by the master architect which could not have been achieved by excavating from the front. It is estimated that about 400,000 tons of rocks were scooped out over hundreds of years to construct this monolithic structure. From the chisel marks on walls of this temple, archeologists could conclude that three types of chisels were used to carve this temple.
ARCHITECTURE
All the carvings are at more than one level. A two-storeyed gateway opens to reveal a U-shaped courtyard. The courtyard is edged by a columned arcade three stories high. The arcades are punctuated by huge sculpted panels, and alcoves containing enormous sculptures of a variety of deities. Originally flying bridges of stone connected these galleries to central temple structures, but these have fallen.
Within the courtyard are two structures. As is traditional in Shiva temples, an image of the sacred bull Nandi fronts the central temple housing the lingam. In Cave 16, the Nandi Mandapa and main Shiva temple are each about 7 metres high, and built on two storeys. The lower stories of the Nandi Mandapa are both solid structures, decorated with elaborate illustrative carvings. The base of the temple has been carved to suggest that elephants are holding the structure aloft.
A rock bridge connects the Nandi Mandapa to the porch of the temple. The structure itself is a tall pyramidic South Indian temple. The shrine – complete with pillars, windows, inner and outer rooms, gathering halls, and an enormous stone lingam at its heart – is carved with niches, plasters, windows as well as images of deities, mithunas (erotic male and female figures) and other figures. Most of the deities at the left of the entrance are Shaivaite (followers of Lord Shiva) while on the right hand side the deities are Vaishnavaites (followers of Lord Vishnu).
There are two Dhwajasthambha (pillars with flagstaff) in the courtyard. The grand sculpture of Ravana attempting to lift Mount Kailasa, with his full might is a landmark in Indian art.
WIKIPEDIA
The Kailasa (Sanskrit: Kailāsanātha) temple is one of the largest rock-cut ancient Hindu temples located in Ellora, Maharashtra, India. It was built in the 8th century by the Rashtrakuta king Krishna I as attested in Kannada inscriptions. This is one of the 34 temples and monasteries known collectively as the Ellora Caves. These extend over more than 2 km, were dug side by side in the wall of a high basalt cliff in the complex located at Ellora. The Kailasa (cave 16) is a remarkable example of Dravidian architecture on account of its striking proportion, elaborate workmanship, architectural content, and sculptural ornamentation of rock-cut architecture. The temple was commissioned and completed between 757-783 CE, when Krishna I ruled the Rashtrakuta dynasty. It is designed to recall Mount Kailash, the home of Lord Shiva. It is a megalith carved out of one single rock.
METHOD OF CONSTRUCTION
The Kailasa Temple is notable for its vertical excavation - carvers started at the top of the original rock, and excavated downward. The traditional methods were rigidly followed by the master architect which could not have been achieved by excavating from the front. It is estimated that about 400,000 tons of rocks were scooped out over hundreds of years to construct this monolithic structure. From the chisel marks on walls of this temple, archeologists could conclude that three types of chisels were used to carve this temple.
ARCHITECTURE
All the carvings are at more than one level. A two-storeyed gateway opens to reveal a U-shaped courtyard. The courtyard is edged by a columned arcade three stories high. The arcades are punctuated by huge sculpted panels, and alcoves containing enormous sculptures of a variety of deities. Originally flying bridges of stone connected these galleries to central temple structures, but these have fallen.
Within the courtyard are two structures. As is traditional in Shiva temples, an image of the sacred bull Nandi fronts the central temple housing the lingam. In Cave 16, the Nandi Mandapa and main Shiva temple are each about 7 metres high, and built on two storeys. The lower stories of the Nandi Mandapa are both solid structures, decorated with elaborate illustrative carvings. The base of the temple has been carved to suggest that elephants are holding the structure aloft.
A rock bridge connects the Nandi Mandapa to the porch of the temple. The structure itself is a tall pyramidic South Indian temple. The shrine – complete with pillars, windows, inner and outer rooms, gathering halls, and an enormous stone lingam at its heart – is carved with niches, plasters, windows as well as images of deities, mithunas (erotic male and female figures) and other figures. Most of the deities at the left of the entrance are Shaivaite (followers of Lord Shiva) while on the right hand side the deities are Vaishnavaites (followers of Lord Vishnu).
There are two Dhwajasthambha (pillars with flagstaff) in the courtyard. The grand sculpture of Ravana attempting to lift Mount Kailasa, with his full might is a landmark in Indian art.
WIKIPEDIA
The Kailasa (Sanskrit: Kailāsanātha) temple is one of the largest rock-cut ancient Hindu temples located in Ellora, Maharashtra, India. It was built in the 8th century by the Rashtrakuta king Krishna I as attested in Kannada inscriptions. This is one of the 34 temples and monasteries known collectively as the Ellora Caves. These extend over more than 2 km, were dug side by side in the wall of a high basalt cliff in the complex located at Ellora. The Kailasa (cave 16) is a remarkable example of Dravidian architecture on account of its striking proportion, elaborate workmanship, architectural content, and sculptural ornamentation of rock-cut architecture. The temple was commissioned and completed between 757-783 CE, when Krishna I ruled the Rashtrakuta dynasty. It is designed to recall Mount Kailash, the home of Lord Shiva. It is a megalith carved out of one single rock.
METHOD OF CONSTRUCTION
The Kailasa Temple is notable for its vertical excavation - carvers started at the top of the original rock, and excavated downward. The traditional methods were rigidly followed by the master architect which could not have been achieved by excavating from the front. It is estimated that about 400,000 tons of rocks were scooped out over hundreds of years to construct this monolithic structure. From the chisel marks on walls of this temple, archeologists could conclude that three types of chisels were used to carve this temple.
ARCHITECTURE
All the carvings are at more than one level. A two-storeyed gateway opens to reveal a U-shaped courtyard. The courtyard is edged by a columned arcade three stories high. The arcades are punctuated by huge sculpted panels, and alcoves containing enormous sculptures of a variety of deities. Originally flying bridges of stone connected these galleries to central temple structures, but these have fallen.
Within the courtyard are two structures. As is traditional in Shiva temples, an image of the sacred bull Nandi fronts the central temple housing the lingam. In Cave 16, the Nandi Mandapa and main Shiva temple are each about 7 metres high, and built on two storeys. The lower stories of the Nandi Mandapa are both solid structures, decorated with elaborate illustrative carvings. The base of the temple has been carved to suggest that elephants are holding the structure aloft.
A rock bridge connects the Nandi Mandapa to the porch of the temple. The structure itself is a tall pyramidic South Indian temple. The shrine – complete with pillars, windows, inner and outer rooms, gathering halls, and an enormous stone lingam at its heart – is carved with niches, plasters, windows as well as images of deities, mithunas (erotic male and female figures) and other figures. Most of the deities at the left of the entrance are Shaivaite (followers of Lord Shiva) while on the right hand side the deities are Vaishnavaites (followers of Lord Vishnu).
There are two Dhwajasthambha (pillars with flagstaff) in the courtyard. The grand sculpture of Ravana attempting to lift Mount Kailasa, with his full might is a landmark in Indian art.
WIKIPEDIA
The Kailasa (Sanskrit: Kailāsanātha) temple is one of the largest rock-cut ancient Hindu temples located in Ellora, Maharashtra, India. It was built in the 8th century by the Rashtrakuta king Krishna I as attested in Kannada inscriptions. This is one of the 34 temples and monasteries known collectively as the Ellora Caves. These extend over more than 2 km, were dug side by side in the wall of a high basalt cliff in the complex located at Ellora. The Kailasa (cave 16) is a remarkable example of Dravidian architecture on account of its striking proportion, elaborate workmanship, architectural content, and sculptural ornamentation of rock-cut architecture. The temple was commissioned and completed between 757-783 CE, when Krishna I ruled the Rashtrakuta dynasty. It is designed to recall Mount Kailash, the home of Lord Shiva. It is a megalith carved out of one single rock.
METHOD OF CONSTRUCTION
The Kailasa Temple is notable for its vertical excavation - carvers started at the top of the original rock, and excavated downward. The traditional methods were rigidly followed by the master architect which could not have been achieved by excavating from the front. It is estimated that about 400,000 tons of rocks were scooped out over hundreds of years to construct this monolithic structure. From the chisel marks on walls of this temple, archeologists could conclude that three types of chisels were used to carve this temple.
ARCHITECTURE
All the carvings are at more than one level. A two-storeyed gateway opens to reveal a U-shaped courtyard. The courtyard is edged by a columned arcade three stories high. The arcades are punctuated by huge sculpted panels, and alcoves containing enormous sculptures of a variety of deities. Originally flying bridges of stone connected these galleries to central temple structures, but these have fallen.
Within the courtyard are two structures. As is traditional in Shiva temples, an image of the sacred bull Nandi fronts the central temple housing the lingam. In Cave 16, the Nandi Mandapa and main Shiva temple are each about 7 metres high, and built on two storeys. The lower stories of the Nandi Mandapa are both solid structures, decorated with elaborate illustrative carvings. The base of the temple has been carved to suggest that elephants are holding the structure aloft.
A rock bridge connects the Nandi Mandapa to the porch of the temple. The structure itself is a tall pyramidic South Indian temple. The shrine – complete with pillars, windows, inner and outer rooms, gathering halls, and an enormous stone lingam at its heart – is carved with niches, plasters, windows as well as images of deities, mithunas (erotic male and female figures) and other figures. Most of the deities at the left of the entrance are Shaivaite (followers of Lord Shiva) while on the right hand side the deities are Vaishnavaites (followers of Lord Vishnu).
There are two Dhwajasthambha (pillars with flagstaff) in the courtyard. The grand sculpture of Ravana attempting to lift Mount Kailasa, with his full might is a landmark in Indian art.
WIKIPEDIA
The Kailasa (Sanskrit: Kailāsanātha) temple is one of the largest rock-cut ancient Hindu temples located in Ellora, Maharashtra, India. It was built in the 8th century by the Rashtrakuta king Krishna I as attested in Kannada inscriptions. This is one of the 34 temples and monasteries known collectively as the Ellora Caves. These extend over more than 2 km, were dug side by side in the wall of a high basalt cliff in the complex located at Ellora. The Kailasa (cave 16) is a remarkable example of Dravidian architecture on account of its striking proportion, elaborate workmanship, architectural content, and sculptural ornamentation of rock-cut architecture. The temple was commissioned and completed between 757-783 CE, when Krishna I ruled the Rashtrakuta dynasty. It is designed to recall Mount Kailash, the home of Lord Shiva. It is a megalith carved out of one single rock.
METHOD OF CONSTRUCTION
The Kailasa Temple is notable for its vertical excavation - carvers started at the top of the original rock, and excavated downward. The traditional methods were rigidly followed by the master architect which could not have been achieved by excavating from the front. It is estimated that about 400,000 tons of rocks were scooped out over hundreds of years to construct this monolithic structure. From the chisel marks on walls of this temple, archeologists could conclude that three types of chisels were used to carve this temple.
ARCHITECTURE
All the carvings are at more than one level. A two-storeyed gateway opens to reveal a U-shaped courtyard. The courtyard is edged by a columned arcade three stories high. The arcades are punctuated by huge sculpted panels, and alcoves containing enormous sculptures of a variety of deities. Originally flying bridges of stone connected these galleries to central temple structures, but these have fallen.
Within the courtyard are two structures. As is traditional in Shiva temples, an image of the sacred bull Nandi fronts the central temple housing the lingam. In Cave 16, the Nandi Mandapa and main Shiva temple are each about 7 metres high, and built on two storeys. The lower stories of the Nandi Mandapa are both solid structures, decorated with elaborate illustrative carvings. The base of the temple has been carved to suggest that elephants are holding the structure aloft.
A rock bridge connects the Nandi Mandapa to the porch of the temple. The structure itself is a tall pyramidic South Indian temple. The shrine – complete with pillars, windows, inner and outer rooms, gathering halls, and an enormous stone lingam at its heart – is carved with niches, plasters, windows as well as images of deities, mithunas (erotic male and female figures) and other figures. Most of the deities at the left of the entrance are Shaivaite (followers of Lord Shiva) while on the right hand side the deities are Vaishnavaites (followers of Lord Vishnu).
There are two Dhwajasthambha (pillars with flagstaff) in the courtyard. The grand sculpture of Ravana attempting to lift Mount Kailasa, with his full might is a landmark in Indian art.
WIKIPEDIA
kailasa_enpregnancy_care youtu.be/tCzEc1UPIcY
HAVING RELATIONSHIPS WITHOUT EXPECTATIONS
Bhagawan Nithyananda Parashivam is revealing a powerful sacred secret in this one verse;
a very powerful sacred secret
Understand this one truth, how you project joy on people,
you project joy on objects, you project joy on particular time,
you project joy on place, you project joy on everything
and try to squeeze them. It’s a very bad business
Understand you give 1 crore worth of joy,
you project on them, you dump on them
When you squeeze, you get only 20 paisa!
No really, that's why I am telling you,
keep all the 1 crore as investment inside you
Do not project your love, your joy on somebody, expecting you'll get it back
See if you give it without any expectation, (Please listen to the video to hear the rest) Less
[Looks best in BLACK] Ellora, an archaeological site, 30 kms from Aurangabad, a city in Maharashtra (India) has a total 34 cave temples dedicated to Buddhism, Jainism and Hinduism, built between 5th and 10th century.
Because of personal reasons we couldn't be here longer and therefore I could only properly tour Cave 16, also known as the Kailasa, dedicated to Lord Shiva.
I hope to go back soon next year and thoroughly study this beautiful rock-cut architecture.
The Kailasa (Sanskrit: Kailāsanātha) temple is one of the largest rock-cut ancient Hindu temples located in Ellora, Maharashtra, India. It was built in the 8th century by the Rashtrakuta king Krishna I as attested in Kannada inscriptions. This is one of the 34 temples and monasteries known collectively as the Ellora Caves. These extend over more than 2 km, were dug side by side in the wall of a high basalt cliff in the complex located at Ellora. The Kailasa (cave 16) is a remarkable example of Dravidian architecture on account of its striking proportion, elaborate workmanship, architectural content, and sculptural ornamentation of rock-cut architecture. The temple was commissioned and completed between 757-783 CE, when Krishna I ruled the Rashtrakuta dynasty. It is designed to recall Mount Kailash, the home of Lord Shiva. It is a megalith carved out of one single rock.
METHOD OF CONSTRUCTION
The Kailasa Temple is notable for its vertical excavation - carvers started at the top of the original rock, and excavated downward. The traditional methods were rigidly followed by the master architect which could not have been achieved by excavating from the front. It is estimated that about 400,000 tons of rocks were scooped out over hundreds of years to construct this monolithic structure. From the chisel marks on walls of this temple, archeologists could conclude that three types of chisels were used to carve this temple.
ARCHITECTURE
All the carvings are at more than one level. A two-storeyed gateway opens to reveal a U-shaped courtyard. The courtyard is edged by a columned arcade three stories high. The arcades are punctuated by huge sculpted panels, and alcoves containing enormous sculptures of a variety of deities. Originally flying bridges of stone connected these galleries to central temple structures, but these have fallen.
Within the courtyard are two structures. As is traditional in Shiva temples, an image of the sacred bull Nandi fronts the central temple housing the lingam. In Cave 16, the Nandi Mandapa and main Shiva temple are each about 7 metres high, and built on two storeys. The lower stories of the Nandi Mandapa are both solid structures, decorated with elaborate illustrative carvings. The base of the temple has been carved to suggest that elephants are holding the structure aloft.
A rock bridge connects the Nandi Mandapa to the porch of the temple. The structure itself is a tall pyramidic South Indian temple. The shrine – complete with pillars, windows, inner and outer rooms, gathering halls, and an enormous stone lingam at its heart – is carved with niches, plasters, windows as well as images of deities, mithunas (erotic male and female figures) and other figures. Most of the deities at the left of the entrance are Shaivaite (followers of Lord Shiva) while on the right hand side the deities are Vaishnavaites (followers of Lord Vishnu).
There are two Dhwajasthambha (pillars with flagstaff) in the courtyard. The grand sculpture of Ravana attempting to lift Mount Kailasa, with his full might is a landmark in Indian art.
WIKIPEDIA
The Kailasa (Sanskrit: Kailāsanātha) temple is one of the largest rock-cut ancient Hindu temples located in Ellora, Maharashtra, India. It was built in the 8th century by the Rashtrakuta king Krishna I as attested in Kannada inscriptions. This is one of the 34 temples and monasteries known collectively as the Ellora Caves. These extend over more than 2 km, were dug side by side in the wall of a high basalt cliff in the complex located at Ellora. The Kailasa (cave 16) is a remarkable example of Dravidian architecture on account of its striking proportion, elaborate workmanship, architectural content, and sculptural ornamentation of rock-cut architecture. The temple was commissioned and completed between 757-783 CE, when Krishna I ruled the Rashtrakuta dynasty. It is designed to recall Mount Kailash, the home of Lord Shiva. It is a megalith carved out of one single rock.
METHOD OF CONSTRUCTION
The Kailasa Temple is notable for its vertical excavation - carvers started at the top of the original rock, and excavated downward. The traditional methods were rigidly followed by the master architect which could not have been achieved by excavating from the front. It is estimated that about 400,000 tons of rocks were scooped out over hundreds of years to construct this monolithic structure. From the chisel marks on walls of this temple, archeologists could conclude that three types of chisels were used to carve this temple.
ARCHITECTURE
All the carvings are at more than one level. A two-storeyed gateway opens to reveal a U-shaped courtyard. The courtyard is edged by a columned arcade three stories high. The arcades are punctuated by huge sculpted panels, and alcoves containing enormous sculptures of a variety of deities. Originally flying bridges of stone connected these galleries to central temple structures, but these have fallen.
Within the courtyard are two structures. As is traditional in Shiva temples, an image of the sacred bull Nandi fronts the central temple housing the lingam. In Cave 16, the Nandi Mandapa and main Shiva temple are each about 7 metres high, and built on two storeys. The lower stories of the Nandi Mandapa are both solid structures, decorated with elaborate illustrative carvings. The base of the temple has been carved to suggest that elephants are holding the structure aloft.
A rock bridge connects the Nandi Mandapa to the porch of the temple. The structure itself is a tall pyramidic South Indian temple. The shrine – complete with pillars, windows, inner and outer rooms, gathering halls, and an enormous stone lingam at its heart – is carved with niches, plasters, windows as well as images of deities, mithunas (erotic male and female figures) and other figures. Most of the deities at the left of the entrance are Shaivaite (followers of Lord Shiva) while on the right hand side the deities are Vaishnavaites (followers of Lord Vishnu).
There are two Dhwajasthambha (pillars with flagstaff) in the courtyard. The grand sculpture of Ravana attempting to lift Mount Kailasa, with his full might is a landmark in Indian art.
WIKIPEDIA
The Kailasa (Sanskrit: Kailāsanātha) temple is one of the largest rock-cut ancient Hindu temples located in Ellora, Maharashtra, India. It was built in the 8th century by the Rashtrakuta king Krishna I as attested in Kannada inscriptions. This is one of the 34 temples and monasteries known collectively as the Ellora Caves. These extend over more than 2 km, were dug side by side in the wall of a high basalt cliff in the complex located at Ellora. The Kailasa (cave 16) is a remarkable example of Dravidian architecture on account of its striking proportion, elaborate workmanship, architectural content, and sculptural ornamentation of rock-cut architecture. The temple was commissioned and completed between 757-783 CE, when Krishna I ruled the Rashtrakuta dynasty. It is designed to recall Mount Kailash, the home of Lord Shiva. It is a megalith carved out of one single rock.
METHOD OF CONSTRUCTION
The Kailasa Temple is notable for its vertical excavation - carvers started at the top of the original rock, and excavated downward. The traditional methods were rigidly followed by the master architect which could not have been achieved by excavating from the front. It is estimated that about 400,000 tons of rocks were scooped out over hundreds of years to construct this monolithic structure. From the chisel marks on walls of this temple, archeologists could conclude that three types of chisels were used to carve this temple.
ARCHITECTURE
All the carvings are at more than one level. A two-storeyed gateway opens to reveal a U-shaped courtyard. The courtyard is edged by a columned arcade three stories high. The arcades are punctuated by huge sculpted panels, and alcoves containing enormous sculptures of a variety of deities. Originally flying bridges of stone connected these galleries to central temple structures, but these have fallen.
Within the courtyard are two structures. As is traditional in Shiva temples, an image of the sacred bull Nandi fronts the central temple housing the lingam. In Cave 16, the Nandi Mandapa and main Shiva temple are each about 7 metres high, and built on two storeys. The lower stories of the Nandi Mandapa are both solid structures, decorated with elaborate illustrative carvings. The base of the temple has been carved to suggest that elephants are holding the structure aloft.
A rock bridge connects the Nandi Mandapa to the porch of the temple. The structure itself is a tall pyramidic South Indian temple. The shrine – complete with pillars, windows, inner and outer rooms, gathering halls, and an enormous stone lingam at its heart – is carved with niches, plasters, windows as well as images of deities, mithunas (erotic male and female figures) and other figures. Most of the deities at the left of the entrance are Shaivaite (followers of Lord Shiva) while on the right hand side the deities are Vaishnavaites (followers of Lord Vishnu).
There are two Dhwajasthambha (pillars with flagstaff) in the courtyard. The grand sculpture of Ravana attempting to lift Mount Kailasa, with his full might is a landmark in Indian art.
WIKIPEDIA
NAIMISHARANYA
Naimisaranyam, also known as Neemsar, Nimsar or Nimkhar is a Hindu temple dedicated to Vishnu located in the north Indian state of Uttar Pradesh.[1] It is one of the Divya Desams, the 108 temples of Vishnu revered in Nalayira Divya Prabandham by the 12 poet saints, or Alwars. The temple is believed to be of significant antiquity with contributions at different times from the ruling kings. The temple is counted as one of the eight temples of Vishnu that self-manifested and is classified as Swayamvyaktha Kshetra. The temple is open till 6pm. The holy tank Chankra Kunda is associated with the temple and it is a pilgrimage centre where people take a holy dip during festive occasions
Sage Narada is believed to have searched for the best theertha (water body) in three worlds. He went to Kailasa, the abode of Shiva, then to Parkadal, the abode of Vishnu and finally landed in the water body in the Naimisha Forest. The central deity is also believed to be worshipped by sudharma and devas(celestical deities).[1][2]
Indra, the king of the devas, was once driven out of devaloka by an asuranamed Vritra. The asura was the recipient of a boon whereby he could not be killed by any weapon that was known till the date of his receiving the boon and additionally that no weapon made of wood or metal could harm him. Indra, who lost all hope of recovering his kingdom went to seek the aid of Vishnu. Vishnu revealed to Indra that only the weapon made from the bones of the sageDadhichi would defeat Vritra. Indra and the other devas therefore approached the sage, whom Indra had once beheaded, and asked him for his aid in defeating Vritra. Dadhichi acceded to the devas' request but said that he wished that he had time to go on a pilgrimage to all the holy rivers before he gave up his life for them. Indra then brought together all the waters of the holy rivers to Naimisaranya, thereby allowing the sage to have his wish fulfilled without a further loss of time. Dadhichi is then said to have given up his life by the art of yoga after which the devas fashioned the Vajrayudha from his spine. This weapon was then used to defeat the asura, allowing Indra to reclaim his place as the king of devaloka.[3]
As told in another legend, when sages were planning to perform penance, Brahma, the god of creation, brought out a ring from darba grass. He asked the sages to perform penance at the place where the ring fell, which is believed to be Naimisaranya. The sages performed penance and at the end of it, Vishnu appeared to the sages and accepted their offerings. It is believed that the forest still has Vishnu and all sages as trees
Naimisaranyam is located at the junction of the roads from Sitapur and Khairabad, 32 km from Sitapur and 42 km from the Sandila railway station, 45 miles north of Lucknow in Uttar Pradesh. Naimisaranya is also known as Nimsar or Nimkhar and is located on the left bank of the river Gomati.[5] The sacred well, namely Chakra Kunda is believed to have started from the weapon of Vishnu, Chakra. There are shrines dedicated to Chakranarayana, Ganesh, Rama, Lakshman
This place has also been visited by Sankaracharya[8] and the famous poet, Surdas resided here. Suthar, the author of 18 puranas is believed to have lived here and presented his sayings to the sages. The central deity is believed to have presided over the forest and hence the puja (rituals) are done to the forest.[2]
The temple is counted as one of the eight temples of Vishnu that self-manifested and is classified as Swayamvyaktha Kshetra.[9] (Seven other temples in the line are Srirangam Ranganathaswamy temple, Bhu Varaha Swamy temple, Tirumala Venkateswara Temple, and Vanamamalai Perumal Temple in South India and Saligrama, Pushkar and Badrinath Temple in North India).[10] Naimisaranya temple is revered in Nalayira Divya Prabandham, the 7th–9th century Vaishnava canon, by Thirumangai Azhwar in ten hymns. The temple is classified as a divyadesam, the 108 Vishnu temples that are revered in the Vaishnava canon.
Every new moon day, a large number of people purify themselves with a dip in the holy well. If the new moon falls on a Monday, it is believed that a holy bath in the well and offering to the presiding deity Lalitha will wash away all the sins committed in their lifetime
By Kailash Mansarovar Foundation Swami Bikash Giri www.sumeruparvat.com , www.naturalitem.com
The Kailasa (Sanskrit: Kailāsanātha) temple is one of the largest rock-cut ancient Hindu temples located in Ellora, Maharashtra, India. It was built in the 8th century by the Rashtrakuta king Krishna I as attested in Kannada inscriptions. This is one of the 34 temples and monasteries known collectively as the Ellora Caves. These extend over more than 2 km, were dug side by side in the wall of a high basalt cliff in the complex located at Ellora. The Kailasa (cave 16) is a remarkable example of Dravidian architecture on account of its striking proportion, elaborate workmanship, architectural content, and sculptural ornamentation of rock-cut architecture. The temple was commissioned and completed between 757-783 CE, when Krishna I ruled the Rashtrakuta dynasty. It is designed to recall Mount Kailash, the home of Lord Shiva. It is a megalith carved out of one single rock.
METHOD OF CONSTRUCTION
The Kailasa Temple is notable for its vertical excavation - carvers started at the top of the original rock, and excavated downward. The traditional methods were rigidly followed by the master architect which could not have been achieved by excavating from the front. It is estimated that about 400,000 tons of rocks were scooped out over hundreds of years to construct this monolithic structure. From the chisel marks on walls of this temple, archeologists could conclude that three types of chisels were used to carve this temple.
ARCHITECTURE
All the carvings are at more than one level. A two-storeyed gateway opens to reveal a U-shaped courtyard. The courtyard is edged by a columned arcade three stories high. The arcades are punctuated by huge sculpted panels, and alcoves containing enormous sculptures of a variety of deities. Originally flying bridges of stone connected these galleries to central temple structures, but these have fallen.
Within the courtyard are two structures. As is traditional in Shiva temples, an image of the sacred bull Nandi fronts the central temple housing the lingam. In Cave 16, the Nandi Mandapa and main Shiva temple are each about 7 metres high, and built on two storeys. The lower stories of the Nandi Mandapa are both solid structures, decorated with elaborate illustrative carvings. The base of the temple has been carved to suggest that elephants are holding the structure aloft.
A rock bridge connects the Nandi Mandapa to the porch of the temple. The structure itself is a tall pyramidic South Indian temple. The shrine – complete with pillars, windows, inner and outer rooms, gathering halls, and an enormous stone lingam at its heart – is carved with niches, plasters, windows as well as images of deities, mithunas (erotic male and female figures) and other figures. Most of the deities at the left of the entrance are Shaivaite (followers of Lord Shiva) while on the right hand side the deities are Vaishnavaites (followers of Lord Vishnu).
There are two Dhwajasthambha (pillars with flagstaff) in the courtyard. The grand sculpture of Ravana attempting to lift Mount Kailasa, with his full might is a landmark in Indian art.
WIKIPEDIA
The Kailasa (Sanskrit: Kailāsanātha) temple is one of the largest rock-cut ancient Hindu temples located in Ellora, Maharashtra, India. It was built in the 8th century by the Rashtrakuta king Krishna I as attested in Kannada inscriptions. This is one of the 34 temples and monasteries known collectively as the Ellora Caves. These extend over more than 2 km, were dug side by side in the wall of a high basalt cliff in the complex located at Ellora. The Kailasa (cave 16) is a remarkable example of Dravidian architecture on account of its striking proportion, elaborate workmanship, architectural content, and sculptural ornamentation of rock-cut architecture. The temple was commissioned and completed between 757-783 CE, when Krishna I ruled the Rashtrakuta dynasty. It is designed to recall Mount Kailash, the home of Lord Shiva. It is a megalith carved out of one single rock.
METHOD OF CONSTRUCTION
The Kailasa Temple is notable for its vertical excavation - carvers started at the top of the original rock, and excavated downward. The traditional methods were rigidly followed by the master architect which could not have been achieved by excavating from the front. It is estimated that about 400,000 tons of rocks were scooped out over hundreds of years to construct this monolithic structure. From the chisel marks on walls of this temple, archeologists could conclude that three types of chisels were used to carve this temple.
ARCHITECTURE
All the carvings are at more than one level. A two-storeyed gateway opens to reveal a U-shaped courtyard. The courtyard is edged by a columned arcade three stories high. The arcades are punctuated by huge sculpted panels, and alcoves containing enormous sculptures of a variety of deities. Originally flying bridges of stone connected these galleries to central temple structures, but these have fallen.
Within the courtyard are two structures. As is traditional in Shiva temples, an image of the sacred bull Nandi fronts the central temple housing the lingam. In Cave 16, the Nandi Mandapa and main Shiva temple are each about 7 metres high, and built on two storeys. The lower stories of the Nandi Mandapa are both solid structures, decorated with elaborate illustrative carvings. The base of the temple has been carved to suggest that elephants are holding the structure aloft.
A rock bridge connects the Nandi Mandapa to the porch of the temple. The structure itself is a tall pyramidic South Indian temple. The shrine – complete with pillars, windows, inner and outer rooms, gathering halls, and an enormous stone lingam at its heart – is carved with niches, plasters, windows as well as images of deities, mithunas (erotic male and female figures) and other figures. Most of the deities at the left of the entrance are Shaivaite (followers of Lord Shiva) while on the right hand side the deities are Vaishnavaites (followers of Lord Vishnu).
There are two Dhwajasthambha (pillars with flagstaff) in the courtyard. The grand sculpture of Ravana attempting to lift Mount Kailasa, with his full might is a landmark in Indian art.
WIKIPEDIA
The Kailasa (Sanskrit: Kailāsanātha) temple is one of the largest rock-cut ancient Hindu temples located in Ellora, Maharashtra, India. It was built in the 8th century by the Rashtrakuta king Krishna I as attested in Kannada inscriptions. This is one of the 34 temples and monasteries known collectively as the Ellora Caves. These extend over more than 2 km, were dug side by side in the wall of a high basalt cliff in the complex located at Ellora. The Kailasa (cave 16) is a remarkable example of Dravidian architecture on account of its striking proportion, elaborate workmanship, architectural content, and sculptural ornamentation of rock-cut architecture. The temple was commissioned and completed between 757-783 CE, when Krishna I ruled the Rashtrakuta dynasty. It is designed to recall Mount Kailash, the home of Lord Shiva. It is a megalith carved out of one single rock.
METHOD OF CONSTRUCTION
The Kailasa Temple is notable for its vertical excavation - carvers started at the top of the original rock, and excavated downward. The traditional methods were rigidly followed by the master architect which could not have been achieved by excavating from the front. It is estimated that about 400,000 tons of rocks were scooped out over hundreds of years to construct this monolithic structure. From the chisel marks on walls of this temple, archeologists could conclude that three types of chisels were used to carve this temple.
ARCHITECTURE
All the carvings are at more than one level. A two-storeyed gateway opens to reveal a U-shaped courtyard. The courtyard is edged by a columned arcade three stories high. The arcades are punctuated by huge sculpted panels, and alcoves containing enormous sculptures of a variety of deities. Originally flying bridges of stone connected these galleries to central temple structures, but these have fallen.
Within the courtyard are two structures. As is traditional in Shiva temples, an image of the sacred bull Nandi fronts the central temple housing the lingam. In Cave 16, the Nandi Mandapa and main Shiva temple are each about 7 metres high, and built on two storeys. The lower stories of the Nandi Mandapa are both solid structures, decorated with elaborate illustrative carvings. The base of the temple has been carved to suggest that elephants are holding the structure aloft.
A rock bridge connects the Nandi Mandapa to the porch of the temple. The structure itself is a tall pyramidic South Indian temple. The shrine – complete with pillars, windows, inner and outer rooms, gathering halls, and an enormous stone lingam at its heart – is carved with niches, plasters, windows as well as images of deities, mithunas (erotic male and female figures) and other figures. Most of the deities at the left of the entrance are Shaivaite (followers of Lord Shiva) while on the right hand side the deities are Vaishnavaites (followers of Lord Vishnu).
There are two Dhwajasthambha (pillars with flagstaff) in the courtyard. The grand sculpture of Ravana attempting to lift Mount Kailasa, with his full might is a landmark in Indian art.
WIKIPEDIA
The Kailasa (Sanskrit: Kailāsanātha) temple is one of the largest rock-cut ancient Hindu temples located in Ellora, Maharashtra, India. It was built in the 8th century by the Rashtrakuta king Krishna I as attested in Kannada inscriptions. This is one of the 34 temples and monasteries known collectively as the Ellora Caves. These extend over more than 2 km, were dug side by side in the wall of a high basalt cliff in the complex located at Ellora. The Kailasa (cave 16) is a remarkable example of Dravidian architecture on account of its striking proportion, elaborate workmanship, architectural content, and sculptural ornamentation of rock-cut architecture. The temple was commissioned and completed between 757-783 CE, when Krishna I ruled the Rashtrakuta dynasty. It is designed to recall Mount Kailash, the home of Lord Shiva. It is a megalith carved out of one single rock.
METHOD OF CONSTRUCTION
The Kailasa Temple is notable for its vertical excavation - carvers started at the top of the original rock, and excavated downward. The traditional methods were rigidly followed by the master architect which could not have been achieved by excavating from the front. It is estimated that about 400,000 tons of rocks were scooped out over hundreds of years to construct this monolithic structure. From the chisel marks on walls of this temple, archeologists could conclude that three types of chisels were used to carve this temple.
ARCHITECTURE
All the carvings are at more than one level. A two-storeyed gateway opens to reveal a U-shaped courtyard. The courtyard is edged by a columned arcade three stories high. The arcades are punctuated by huge sculpted panels, and alcoves containing enormous sculptures of a variety of deities. Originally flying bridges of stone connected these galleries to central temple structures, but these have fallen.
Within the courtyard are two structures. As is traditional in Shiva temples, an image of the sacred bull Nandi fronts the central temple housing the lingam. In Cave 16, the Nandi Mandapa and main Shiva temple are each about 7 metres high, and built on two storeys. The lower stories of the Nandi Mandapa are both solid structures, decorated with elaborate illustrative carvings. The base of the temple has been carved to suggest that elephants are holding the structure aloft.
A rock bridge connects the Nandi Mandapa to the porch of the temple. The structure itself is a tall pyramidic South Indian temple. The shrine – complete with pillars, windows, inner and outer rooms, gathering halls, and an enormous stone lingam at its heart – is carved with niches, plasters, windows as well as images of deities, mithunas (erotic male and female figures) and other figures. Most of the deities at the left of the entrance are Shaivaite (followers of Lord Shiva) while on the right hand side the deities are Vaishnavaites (followers of Lord Vishnu).
There are two Dhwajasthambha (pillars with flagstaff) in the courtyard. The grand sculpture of Ravana attempting to lift Mount Kailasa, with his full might is a landmark in Indian art.
WIKIPEDIA
The Kailasa temple is the unrivaled centerpiece of Ellora. It looks like a freestanding, multi-storeyed temple complex, but it was carved out of one single rock, and covers an area double the size of Parthenon in Athens.
The construction of this cave was a feat of human genius – it entailed the removal of 200,000 tonnes of rock, and took 100 years to complete.
_____________________________________________
Ellora (\e-ˈlȯr-ə\, Marathi: वेरूळ Vērūḷa), is an archaeological site, 29 km North-West of the city of Aurangabad in the Indian state of Maharashtra built by the Rashtrakuta dynasty. It is also known as Elapura (in the Rashtrakuta literature-Kannada). Well known for its monumental caves, Ellora is a World Heritage Site. Ellora represents the epitome of Indian rock-cut architecture. The 34 "caves" are actually structures excavated out of the vertical face of the Charanandri hills. Buddhist, Hindu and Jain rock-cut temples and viharas and mathas were built between the 5th century and 10th century. The 12 Buddhist (caves 1–12), 17 Hindu (caves 13–29) and 5 Jain (caves 30–34) caves, built in proximity, demonstrate the religious harmony prevalent during this period of Indian history. It is a protected monument under the Archaeological Survey of India.
ETYMOLOGY
Ellora, also called Verula or Elura, is the cave form of the Ancient name Elapura.
HISTORY
Ellora is known for Hindu, Buddhist and Jain cave temples built during (6th and 9th centuries) the rule of the Kalachuri, Chalukya and Rashtrakuta dynasties. The Jagannatha Sabha a group of five Jain cave temples of 9th century built by Rashtrakuta.
THE BUDDHIST CAVES
These caves were built during the 5th-7th century. It was initially thought that the Buddhist caves were one of the earliest structures, created between the fifth and eighth centuries, with caves 1-5 in the first phase (400-600) and 6-12 in the later phase (mid 7th-mid 8th), but now it is clear to the modern scholars that some of the Hindu caves (27,29,21,28,19,26,20,17 and 14) precede these caves.[citation needed] The earliest Buddhist cave is Cave 6, followed by 5,2,3,5 (right wing), 4,7,8,10 and 9. Caves 11 and 12 were the last. All the Buddhist caves were constructed between 630-700.
These structures consist mostly of viharas or monasteries: large, multi-storeyed buildings carved into the mountain face, including living quarters, sleeping quarters, kitchens, and other rooms. Some of these monastery caves have shrines including carvings of Gautama Buddha, bodhisattvas and saints. In many of these caves, sculptors have endeavoured to give the stone the look of wood.
Most famous of the Buddhist caves is cave 10, (refer map) a chaitya hall (chandrashala) or 'Vishvakarma cave', popularly known as the 'Carpenter's Cave'. Beyond its multi-storeyed entry is a cathedral-like stupa hall also known as chaitya, whose ceiling has been carved to give the impression of wooden beams. At the heart of this cave is a 15-foot statue of Buddha seated in a preaching pose. Amongst other Buddhist caves, all of the first nine (caves 1–9) are monasteries. The last two caves, Do Tal (cave 11) and Tin Tal (cave 12) have three stories.
CAVE 10
Cave 10 is a vihara with eight cells, four in the back wall and four in the right wall. It had a portico in the front with a cell. Possibly served as a granary for other viharas.
THE VISHWAKARMA
The Vishwakarma (Cave 10) is the only chaitya griha amongst the Buddhist group of caves. It is locally known as Vishwakarma or Sutar ka jhopda "carpenter's hut". It follows the pattern of construction of Caves 19 and 26 of Ajanta. On stylistic grounds, the date of construction of this cave is assigned to 700 A.D. The chaitya once had a high screen wall, which is ruined at present. At the front is a rock-cut court, which is entered through a flight of steps. On either side are pillared porticos with chambers in their back walls. These were probably intended to have subsidiary shrines but not completed. The pillared verandah of the chaitya has a small shrine at either end and a single cell in the far end of the back wall. The corridor columns have massive squarish shafts and ghata-pallava (vase and foliage) capitals. The main hall is apsidal on plan and is divided into a central nave and side aisles by 28 octagonal columns with plain bracket capitals. In the apsidal end of the chaitya hall is a stupa on the face of which a colossal 3.30 m high seated Buddha in vyakhyana mudra (teaching posture) is carved. A large Bodhi tree is carved at the back. The hall has a vaulted roof in which ribs have been carved in the rock imitating the wooden ones.
THE HINDU CAVES
The Hindu caves were constructed between the middle of sixth century to the end of the eighth century. The early caves (caves 17–29) were constructed during the Kalachuri period. The work first commenced in Caves 28, 27 and 19. These were followed by two most impressive caves constructed in the early phase - Caves 29 and 21. Along with these two, work was underway at Caves 20 and 26, and slightly later at Caves 17, 19 and 28. The caves 14, 15 and 16 were constructed during the Rashtrakuta period. The work began in Caves 14 and 15 and culminated in Cave 16. All these structures represent a different style of creative vision and execution skills. Some were of such complexity that they required several generations of planning and co-ordination to complete.
THE KAILASANATHA TEMPLE
Cave 16, also known as the Kailasa temple, is the unrivaled centerpiece of Ellora. This is designed to recall Mount Kailash, the abode of Lord Shiva – looks like a freestanding, multi-storeyed temple complex, but it was carved out of one single rock, and covers an area double the size of Parthenon in Athens. Initially the temple was covered with white plaster thus even more increasing the similarity to snow-covered Mount Kailash.
All the carvings are done in more than one level. A two-storeyed gateway resembling a South Indian Gopura opens to reveal a U-shaped courtyard. The courtyard is edged by columned galleries three storeys high. The galleries are punctuated by huge sculpted panels, and alcoves containing enormous sculptures of a variety of deities. Originally flying bridges of stone connected these galleries to central temple structures, but these have fallen.
Within the courtyard are three structures. As is traditional in Shiva temples, the first is a large image of the sacred bull Nandi in front of the central temple. The central temple - Nandi Mantapa or Mandapa - houses the Lingam. The Nandi Mandapa stands on 16 pillars and is 29.3 m high. The base of the Nandi Mandapa has been carved to suggest that life-sized elephants are holding the structure aloft. A living rock bridge connects the Nandi Mandapa to the Shiva temple behind it. The temple itself is a tall pyramidal structure reminiscent of a South Indian Dravidian temple. The shrine – complete with pillars, windows, inner and outer rooms, gathering halls, and an enormous lingam at its heart – carved from living stone, is carved with niches, pilasters, windows as well as images of deities, mithunas (erotic male and female figures) and other figures. Most of the deities at the left of the entrance are Shaivaite (followers of Shiva) while on the right hand side the deities are Vaishnavaites (followers of Vishnu). There are two Dhvajastambhas (pillars with the flagstaff) in the courtyard. The grand sculpture of Ravana attempting to lift Mount Kailasa, the abode of Lord Shiva, with his full might is a landmark in Indian art. The construction of this cave was a feat of human genius – it entailed the removal of 200,000 tonnes of rock, and took 100 years to complete.
The temple is a splendid achievement of Rashtrakuta Karnata architecture. This project was started by Krishna I (757–773) of the Rashtrakuta dynasty that ruled from Manyakheta in present day Karnataka state. His rule had also spread to southern India, hence this temple was excavated in the prevailing style. Its builders modelled it on the lines of the Virupaksha Temple in Pattadakal. Being a south Indian style temple, it does not have a shikhara common to north Indian temples. – The Guide to the Architecture of the Indian Subcontinent, 1996, Takeo Kamiya, Japan Architects Academy and archaeological Survey of India.
THE DASHAVATARA
The Dashavatara (Cave 15) was begun as a Buddhist monastery. It has an open court with a free-standing monolithic mandapa at the middle and a two-storeyed excavated temple at the rear. The layout of the temple is closely related to caves 11 and 12. Large sculptural panels between the wall columns on the upper floor illustrate a wide range of themes, which include the ten avatars of Vishnu. An inscription of grant of Dantidurga is found on the back wall of the front mandapa. According to Coomaraswamy, the finest relief of this cave is the one depicting the death of Hiranyakashipu, where Vishnu in man-lion (Narasimha) form, emerges from a pillar to lay a fatal hand upon the shoulder of Hiranyakashipu.
OTHER HINDU CAVES
CAVE 21
Other notable Hindu caves are the Rameshvara (Cave 21), which has figurines of river goddesses Ganga and Yamuna at the entrance and the Dhumar Lena (Cave 29) whose design is similar to the cave temple on Elephanta Island near Mumbai. Two other caves, the Ravan ki Khai (Cave 14) and the Nilkantha (Cave 22) also have several sculptures. The rest of the Hindu caves, which include the Kumbharvada (Cave 25) and the Gopilena (Cave 27) have no significant sculptures.
The five Jain caves at Ellora belong to the ninth and tenth centuries. They all belong to the Digambara sect. Jain caves reveal specific dimensions of Jain philosophy and tradition. They reflect a strict sense of asceticism – they are not relatively large as compared to others, but they present exceptionally detailed art works. The most remarkable Jain shrines are the Chhota Kailash (cave 30), the Indra Sabha (cave 32) and the Jagannath Sabha (cave 33). Cave 31 is an unfinished four-pillared hall and a shrine. Cave 34 is a small cave, which can be approached through an opening on the left side of Cave 33. Amongst other devotional carvings, a place called samvatsarana can be found in Elora caves. Samvatsarana is of special interest to Jains, as it is a hall where the tirthankara preaches after attaining omniscience.
THE INDRA SABHA
The Indra Sabha (Cave 32) is a two storeyed cave with one more monolithic shrine in its court. It has a very fine carving of the lotus flower on the ceiling. It got the appellation "Indra Sabha" probably it is significantly ornate and also because of the sculpture of the yaksha (dedicated attendant deity) Matanga on an elephant, which was wrongly identified as that of Indra. On the upper level of the double-storied shrine excavated at the rear of the court, an U image of Ambika, the yakshini of Neminath, is found seated on her lion under a mango tree, laden with fruits.
OTHER JAIN CAVES
All other Jain caves are also characterized by intricate detailing. Many of the structures had rich paintings in the ceilings - fragments of which are still visible.
GEOLOGY OF ELLORA
Ellora occupies a relatively flat region of the Western Ghats. Ancient volcanic activity in this area created many layered basalt formations, known as Deccan Traps. During the Cretaceous, one such volcanic hill formed on the southwest-facing side of Ellora. Its vertical face made access to many layers of rock formations easier, enabling architects to pick basalt with finer grains for more detailed sculpting.
INSCRIPTIONS AT ELLORA
Several inscriptions at Ellora range from 6th century to 15th century. The best known of them is an inscription of Rashtrakuta Dantidurga (c. 753-57 A.D.) on the back wall of the front mandapa of Cave 15, which gives an account of his conquests. Inscriptions on the Kailash temple itself range from 9th to 15th century. Jain cave Jagannatha Sabha has 3 inscriptions that give the names of monks and donors. A Parshvanth temple on the hill has a 11th-century inscription that gives the name of the donor from Vardhanapura.
The Great Kailasa (Cave 16) is attributed to Krishna I (c. 757-83 A.D.), the successor and uncle of Dantidurga. A copper plate grant by Karka II (c. 812-13 A.D.) narrates that a great edifice was built on a hill by Krishnaraja at Elapura (Ellora).
The Ellora caves, unlike Ajanta, were never lost. There have been several written records that indicate that these caves were visited regularly. The earliest is that of the Arab geographer Al-Mas‘udi of the 10th century A.D. In 1352 A.D. Sultan Hasan Gangu Bahmani, who camped at the site and visited the caves. The others are by Firishta, Thevenot (1633–67), Niccolao Manucci (1653-1708), Charles Warre Malet (1794), and Seely (1824)
WIKIPEDIA
The Sovereign of the Sovereign State of SHRIKAILASA, Bhagavan Sri Nithyananda Paramashivam for His global humanitarian contributions including to the City of Montclair, and thanks the SPH for keeping the congregation spiritually healthy.
KAILASA Los Angeles in Montclair, California has persistently contributed to the community in multifarious ways and especially during the COVID-19 pandemic through donations to local food banks, free health and wellness programs, classes on yoga and meditation, and empowering ancient Hindu celebrations and events.
The Supreme Pontiff of Hinduism and The Sovereign of the Sovereign State of SHRIKAILASA, Bhagavan Sri Nithyanandam Paramashivam, for the last 27 years, with His intense sacrifice and hard work, has been serving the humanity through KAILASA Los Angeles and various enlightenment ecosystems in the US and across the globe as well. The SPH with His untiring hard work, has been progressing the lives of millions through a range of global humanitarian services and powerful life transforming teachings. Through the SPH’s Minutes4peace program, 4.3 billion+ minutes in meditation for World Peace has been recorded since 2002, and 1 billion+ free meals have been served globally since last 27 years though His No Hungry Home project. See Less
. . . it took ten generations to cut this temple out of a single rock! To understand my pictures please read the explanation below:
______
The Kailasa (Sanskrit: Kailāsanātha) temple is one of the largest rock-cut ancient Hindu temples located in Ellora, Maharashtra, India. It was built in the 8th century by the Rashtrakuta king Krishna I as attested in Kannada inscriptions. This is one of the 34 temples and monasteries known collectively as the Ellora Caves. These extend over more than 2 km, were dug side by side in the wall of a high basalt cliff in the complex located at Ellora. The Kailasa (cave 16) is a remarkable example of Dravidian architecture on account of its striking proportion, elaborate workmanship, architectural content, and sculptural ornamentation of rock-cut architecture. The temple was commissioned and completed between 757-783 CE, when Krishna I ruled the Rashtrakuta dynasty. It is designed to recall Mount Kailash, the home of Lord Shiva. It is a megalith carved out of one single rock.
METHOD OF CONSTRUCTION
The Kailasa Temple is notable for its vertical excavation - carvers started at the top of the original rock, and excavated downward. The traditional methods were rigidly followed by the master architect which could not have been achieved by excavating from the front. It is estimated that about 400,000 tons of rocks were scooped out over hundreds of years to construct this monolithic structure. From the chisel marks on walls of this temple, archeologists could conclude that three types of chisels were used to carve this temple.
ARCHITECTURE
All the carvings are at more than one level. A two-storeyed gateway opens to reveal a U-shaped courtyard. The courtyard is edged by a columned arcade three stories high. The arcades are punctuated by huge sculpted panels, and alcoves containing enormous sculptures of a variety of deities. Originally flying bridges of stone connected these galleries to central temple structures, but these have fallen.
Within the courtyard are two structures. As is traditional in Shiva temples, an image of the sacred bull Nandi fronts the central temple housing the lingam. In Cave 16, the Nandi Mandapa and main Shiva temple are each about 7 metres high, and built on two storeys. The lower stories of the Nandi Mandapa are both solid structures, decorated with elaborate illustrative carvings. The base of the temple has been carved to suggest that elephants are holding the structure aloft.
A rock bridge connects the Nandi Mandapa to the porch of the temple. The structure itself is a tall pyramidic South Indian temple. The shrine – complete with pillars, windows, inner and outer rooms, gathering halls, and an enormous stone lingam at its heart – is carved with niches, plasters, windows as well as images of deities, mithunas (erotic male and female figures) and other figures. Most of the deities at the left of the entrance are Shaivaite (followers of Lord Shiva) while on the right hand side the deities are Vaishnavaites (followers of Lord Vishnu).
There are two Dhwajasthambha (pillars with flagstaff) in the courtyard. The grand sculpture of Ravana attempting to lift Mount Kailasa, with his full might is a landmark in Indian art.
WIKIPEDIA