View allAll Photos Tagged KAILASA
The Kailasa (Sanskrit: Kailāsanātha) temple is one of the largest rock-cut ancient Hindu temples located in Ellora, Maharashtra, India. It was built in the 8th century by the Rashtrakuta king Krishna I as attested in Kannada inscriptions. This is one of the 34 temples and monasteries known collectively as the Ellora Caves. These extend over more than 2 km, were dug side by side in the wall of a high basalt cliff in the complex located at Ellora. The Kailasa (cave 16) is a remarkable example of Dravidian architecture on account of its striking proportion, elaborate workmanship, architectural content, and sculptural ornamentation of rock-cut architecture. The temple was commissioned and completed between 757-783 CE, when Krishna I ruled the Rashtrakuta dynasty. It is designed to recall Mount Kailash, the home of Lord Shiva. It is a megalith carved out of one single rock.
METHOD OF CONSTRUCTION
The Kailasa Temple is notable for its vertical excavation - carvers started at the top of the original rock, and excavated downward. The traditional methods were rigidly followed by the master architect which could not have been achieved by excavating from the front. It is estimated that about 400,000 tons of rocks were scooped out over hundreds of years to construct this monolithic structure. From the chisel marks on walls of this temple, archeologists could conclude that three types of chisels were used to carve this temple.
ARCHITECTURE
All the carvings are at more than one level. A two-storeyed gateway opens to reveal a U-shaped courtyard. The courtyard is edged by a columned arcade three stories high. The arcades are punctuated by huge sculpted panels, and alcoves containing enormous sculptures of a variety of deities. Originally flying bridges of stone connected these galleries to central temple structures, but these have fallen.
Within the courtyard are two structures. As is traditional in Shiva temples, an image of the sacred bull Nandi fronts the central temple housing the lingam. In Cave 16, the Nandi Mandapa and main Shiva temple are each about 7 metres high, and built on two storeys. The lower stories of the Nandi Mandapa are both solid structures, decorated with elaborate illustrative carvings. The base of the temple has been carved to suggest that elephants are holding the structure aloft.
A rock bridge connects the Nandi Mandapa to the porch of the temple. The structure itself is a tall pyramidic South Indian temple. The shrine – complete with pillars, windows, inner and outer rooms, gathering halls, and an enormous stone lingam at its heart – is carved with niches, plasters, windows as well as images of deities, mithunas (erotic male and female figures) and other figures. Most of the deities at the left of the entrance are Shaivaite (followers of Lord Shiva) while on the right hand side the deities are Vaishnavaites (followers of Lord Vishnu).
There are two Dhwajasthambha (pillars with flagstaff) in the courtyard. The grand sculpture of Ravana attempting to lift Mount Kailasa, with his full might is a landmark in Indian art.
WIKIPEDIA
The Kailasa (Sanskrit: Kailāsanātha) temple is one of the largest rock-cut ancient Hindu temples located in Ellora, Maharashtra, India. It was built in the 8th century by the Rashtrakuta king Krishna I as attested in Kannada inscriptions. This is one of the 34 temples and monasteries known collectively as the Ellora Caves. These extend over more than 2 km, were dug side by side in the wall of a high basalt cliff in the complex located at Ellora. The Kailasa (cave 16) is a remarkable example of Dravidian architecture on account of its striking proportion, elaborate workmanship, architectural content, and sculptural ornamentation of rock-cut architecture. The temple was commissioned and completed between 757-783 CE, when Krishna I ruled the Rashtrakuta dynasty. It is designed to recall Mount Kailash, the home of Lord Shiva. It is a megalith carved out of one single rock.
METHOD OF CONSTRUCTION
The Kailasa Temple is notable for its vertical excavation - carvers started at the top of the original rock, and excavated downward. The traditional methods were rigidly followed by the master architect which could not have been achieved by excavating from the front. It is estimated that about 400,000 tons of rocks were scooped out over hundreds of years to construct this monolithic structure. From the chisel marks on walls of this temple, archeologists could conclude that three types of chisels were used to carve this temple.
ARCHITECTURE
All the carvings are at more than one level. A two-storeyed gateway opens to reveal a U-shaped courtyard. The courtyard is edged by a columned arcade three stories high. The arcades are punctuated by huge sculpted panels, and alcoves containing enormous sculptures of a variety of deities. Originally flying bridges of stone connected these galleries to central temple structures, but these have fallen.
Within the courtyard are two structures. As is traditional in Shiva temples, an image of the sacred bull Nandi fronts the central temple housing the lingam. In Cave 16, the Nandi Mandapa and main Shiva temple are each about 7 metres high, and built on two storeys. The lower stories of the Nandi Mandapa are both solid structures, decorated with elaborate illustrative carvings. The base of the temple has been carved to suggest that elephants are holding the structure aloft.
A rock bridge connects the Nandi Mandapa to the porch of the temple. The structure itself is a tall pyramidic South Indian temple. The shrine – complete with pillars, windows, inner and outer rooms, gathering halls, and an enormous stone lingam at its heart – is carved with niches, plasters, windows as well as images of deities, mithunas (erotic male and female figures) and other figures. Most of the deities at the left of the entrance are Shaivaite (followers of Lord Shiva) while on the right hand side the deities are Vaishnavaites (followers of Lord Vishnu).
There are two Dhwajasthambha (pillars with flagstaff) in the courtyard. The grand sculpture of Ravana attempting to lift Mount Kailasa, with his full might is a landmark in Indian art.
WIKIPEDIA
The Kailasa (Sanskrit: Kailāsanātha) temple is one of the largest rock-cut ancient Hindu temples located in Ellora, Maharashtra, India. It was built in the 8th century by the Rashtrakuta king Krishna I as attested in Kannada inscriptions. This is one of the 34 temples and monasteries known collectively as the Ellora Caves. These extend over more than 2 km, were dug side by side in the wall of a high basalt cliff in the complex located at Ellora. The Kailasa (cave 16) is a remarkable example of Dravidian architecture on account of its striking proportion, elaborate workmanship, architectural content, and sculptural ornamentation of rock-cut architecture. The temple was commissioned and completed between 757-783 CE, when Krishna I ruled the Rashtrakuta dynasty. It is designed to recall Mount Kailash, the home of Lord Shiva. It is a megalith carved out of one single rock.
METHOD OF CONSTRUCTION
The Kailasa Temple is notable for its vertical excavation - carvers started at the top of the original rock, and excavated downward. The traditional methods were rigidly followed by the master architect which could not have been achieved by excavating from the front. It is estimated that about 400,000 tons of rocks were scooped out over hundreds of years to construct this monolithic structure. From the chisel marks on walls of this temple, archeologists could conclude that three types of chisels were used to carve this temple.
ARCHITECTURE
All the carvings are at more than one level. A two-storeyed gateway opens to reveal a U-shaped courtyard. The courtyard is edged by a columned arcade three stories high. The arcades are punctuated by huge sculpted panels, and alcoves containing enormous sculptures of a variety of deities. Originally flying bridges of stone connected these galleries to central temple structures, but these have fallen.
Within the courtyard are two structures. As is traditional in Shiva temples, an image of the sacred bull Nandi fronts the central temple housing the lingam. In Cave 16, the Nandi Mandapa and main Shiva temple are each about 7 metres high, and built on two storeys. The lower stories of the Nandi Mandapa are both solid structures, decorated with elaborate illustrative carvings. The base of the temple has been carved to suggest that elephants are holding the structure aloft.
A rock bridge connects the Nandi Mandapa to the porch of the temple. The structure itself is a tall pyramidic South Indian temple. The shrine – complete with pillars, windows, inner and outer rooms, gathering halls, and an enormous stone lingam at its heart – is carved with niches, plasters, windows as well as images of deities, mithunas (erotic male and female figures) and other figures. Most of the deities at the left of the entrance are Shaivaite (followers of Lord Shiva) while on the right hand side the deities are Vaishnavaites (followers of Lord Vishnu).
There are two Dhwajasthambha (pillars with flagstaff) in the courtyard. The grand sculpture of Ravana attempting to lift Mount Kailasa, with his full might is a landmark in Indian art.
WIKIPEDIA
The Kailasa (Sanskrit: Kailāsanātha) temple is one of the largest rock-cut ancient Hindu temples located in Ellora, Maharashtra, India. It was built in the 8th century by the Rashtrakuta king Krishna I as attested in Kannada inscriptions. This is one of the 34 temples and monasteries known collectively as the Ellora Caves. These extend over more than 2 km, were dug side by side in the wall of a high basalt cliff in the complex located at Ellora. The Kailasa (cave 16) is a remarkable example of Dravidian architecture on account of its striking proportion, elaborate workmanship, architectural content, and sculptural ornamentation of rock-cut architecture. The temple was commissioned and completed between 757-783 CE, when Krishna I ruled the Rashtrakuta dynasty. It is designed to recall Mount Kailash, the home of Lord Shiva. It is a megalith carved out of one single rock.
METHOD OF CONSTRUCTION
The Kailasa Temple is notable for its vertical excavation - carvers started at the top of the original rock, and excavated downward. The traditional methods were rigidly followed by the master architect which could not have been achieved by excavating from the front. It is estimated that about 400,000 tons of rocks were scooped out over hundreds of years to construct this monolithic structure. From the chisel marks on walls of this temple, archeologists could conclude that three types of chisels were used to carve this temple.
ARCHITECTURE
All the carvings are at more than one level. A two-storeyed gateway opens to reveal a U-shaped courtyard. The courtyard is edged by a columned arcade three stories high. The arcades are punctuated by huge sculpted panels, and alcoves containing enormous sculptures of a variety of deities. Originally flying bridges of stone connected these galleries to central temple structures, but these have fallen.
Within the courtyard are two structures. As is traditional in Shiva temples, an image of the sacred bull Nandi fronts the central temple housing the lingam. In Cave 16, the Nandi Mandapa and main Shiva temple are each about 7 metres high, and built on two storeys. The lower stories of the Nandi Mandapa are both solid structures, decorated with elaborate illustrative carvings. The base of the temple has been carved to suggest that elephants are holding the structure aloft.
A rock bridge connects the Nandi Mandapa to the porch of the temple. The structure itself is a tall pyramidic South Indian temple. The shrine – complete with pillars, windows, inner and outer rooms, gathering halls, and an enormous stone lingam at its heart – is carved with niches, plasters, windows as well as images of deities, mithunas (erotic male and female figures) and other figures. Most of the deities at the left of the entrance are Shaivaite (followers of Lord Shiva) while on the right hand side the deities are Vaishnavaites (followers of Lord Vishnu).
There are two Dhwajasthambha (pillars with flagstaff) in the courtyard. The grand sculpture of Ravana attempting to lift Mount Kailasa, with his full might is a landmark in Indian art.
WIKIPEDIA
The Kailasa (Sanskrit: Kailāsanātha) temple is one of the largest rock-cut ancient Hindu temples located in Ellora, Maharashtra, India. It was built in the 8th century by the Rashtrakuta king Krishna I as attested in Kannada inscriptions. This is one of the 34 temples and monasteries known collectively as the Ellora Caves. These extend over more than 2 km, were dug side by side in the wall of a high basalt cliff in the complex located at Ellora. The Kailasa (cave 16) is a remarkable example of Dravidian architecture on account of its striking proportion, elaborate workmanship, architectural content, and sculptural ornamentation of rock-cut architecture. The temple was commissioned and completed between 757-783 CE, when Krishna I ruled the Rashtrakuta dynasty. It is designed to recall Mount Kailash, the home of Lord Shiva. It is a megalith carved out of one single rock.
METHOD OF CONSTRUCTION
The Kailasa Temple is notable for its vertical excavation - carvers started at the top of the original rock, and excavated downward. The traditional methods were rigidly followed by the master architect which could not have been achieved by excavating from the front. It is estimated that about 400,000 tons of rocks were scooped out over hundreds of years to construct this monolithic structure. From the chisel marks on walls of this temple, archeologists could conclude that three types of chisels were used to carve this temple.
ARCHITECTURE
All the carvings are at more than one level. A two-storeyed gateway opens to reveal a U-shaped courtyard. The courtyard is edged by a columned arcade three stories high. The arcades are punctuated by huge sculpted panels, and alcoves containing enormous sculptures of a variety of deities. Originally flying bridges of stone connected these galleries to central temple structures, but these have fallen.
Within the courtyard are two structures. As is traditional in Shiva temples, an image of the sacred bull Nandi fronts the central temple housing the lingam. In Cave 16, the Nandi Mandapa and main Shiva temple are each about 7 metres high, and built on two storeys. The lower stories of the Nandi Mandapa are both solid structures, decorated with elaborate illustrative carvings. The base of the temple has been carved to suggest that elephants are holding the structure aloft.
A rock bridge connects the Nandi Mandapa to the porch of the temple. The structure itself is a tall pyramidic South Indian temple. The shrine – complete with pillars, windows, inner and outer rooms, gathering halls, and an enormous stone lingam at its heart – is carved with niches, plasters, windows as well as images of deities, mithunas (erotic male and female figures) and other figures. Most of the deities at the left of the entrance are Shaivaite (followers of Lord Shiva) while on the right hand side the deities are Vaishnavaites (followers of Lord Vishnu).
There are two Dhwajasthambha (pillars with flagstaff) in the courtyard. The grand sculpture of Ravana attempting to lift Mount Kailasa, with his full might is a landmark in Indian art.
WIKIPEDIA
. . . it took ten generations to cut this temple out of a single rock! To understand my pictures please read the explanation below:
______
The Kailasa (Sanskrit: Kailāsanātha) temple is one of the largest rock-cut ancient Hindu temples located in Ellora, Maharashtra, India. It was built in the 8th century by the Rashtrakuta king Krishna I as attested in Kannada inscriptions. This is one of the 34 temples and monasteries known collectively as the Ellora Caves. These extend over more than 2 km, were dug side by side in the wall of a high basalt cliff in the complex located at Ellora. The Kailasa (cave 16) is a remarkable example of Dravidian architecture on account of its striking proportion, elaborate workmanship, architectural content, and sculptural ornamentation of rock-cut architecture. The temple was commissioned and completed between 757-783 CE, when Krishna I ruled the Rashtrakuta dynasty. It is designed to recall Mount Kailash, the home of Lord Shiva. It is a megalith carved out of one single rock.
METHOD OF CONSTRUCTION
The Kailasa Temple is notable for its vertical excavation - carvers started at the top of the original rock, and excavated downward. The traditional methods were rigidly followed by the master architect which could not have been achieved by excavating from the front. It is estimated that about 400,000 tons of rocks were scooped out over hundreds of years to construct this monolithic structure. From the chisel marks on walls of this temple, archeologists could conclude that three types of chisels were used to carve this temple.
ARCHITECTURE
All the carvings are at more than one level. A two-storeyed gateway opens to reveal a U-shaped courtyard. The courtyard is edged by a columned arcade three stories high. The arcades are punctuated by huge sculpted panels, and alcoves containing enormous sculptures of a variety of deities. Originally flying bridges of stone connected these galleries to central temple structures, but these have fallen.
Within the courtyard are two structures. As is traditional in Shiva temples, an image of the sacred bull Nandi fronts the central temple housing the lingam. In Cave 16, the Nandi Mandapa and main Shiva temple are each about 7 metres high, and built on two storeys. The lower stories of the Nandi Mandapa are both solid structures, decorated with elaborate illustrative carvings. The base of the temple has been carved to suggest that elephants are holding the structure aloft.
A rock bridge connects the Nandi Mandapa to the porch of the temple. The structure itself is a tall pyramidic South Indian temple. The shrine – complete with pillars, windows, inner and outer rooms, gathering halls, and an enormous stone lingam at its heart – is carved with niches, plasters, windows as well as images of deities, mithunas (erotic male and female figures) and other figures. Most of the deities at the left of the entrance are Shaivaite (followers of Lord Shiva) while on the right hand side the deities are Vaishnavaites (followers of Lord Vishnu).
There are two Dhwajasthambha (pillars with flagstaff) in the courtyard. The grand sculpture of Ravana attempting to lift Mount Kailasa, with his full might is a landmark in Indian art.
WIKIPEDIA
. . . it took ten generations to cut this temple out of a single rock! To understand my pictures please read the explanation below:
______
The Kailasa (Sanskrit: Kailāsanātha) temple is one of the largest rock-cut ancient Hindu temples located in Ellora, Maharashtra, India. It was built in the 8th century by the Rashtrakuta king Krishna I as attested in Kannada inscriptions. This is one of the 34 temples and monasteries known collectively as the Ellora Caves. These extend over more than 2 km, were dug side by side in the wall of a high basalt cliff in the complex located at Ellora. The Kailasa (cave 16) is a remarkable example of Dravidian architecture on account of its striking proportion, elaborate workmanship, architectural content, and sculptural ornamentation of rock-cut architecture. The temple was commissioned and completed between 757-783 CE, when Krishna I ruled the Rashtrakuta dynasty. It is designed to recall Mount Kailash, the home of Lord Shiva. It is a megalith carved out of one single rock.
METHOD OF CONSTRUCTION
The Kailasa Temple is notable for its vertical excavation - carvers started at the top of the original rock, and excavated downward. The traditional methods were rigidly followed by the master architect which could not have been achieved by excavating from the front. It is estimated that about 400,000 tons of rocks were scooped out over hundreds of years to construct this monolithic structure. From the chisel marks on walls of this temple, archeologists could conclude that three types of chisels were used to carve this temple.
ARCHITECTURE
All the carvings are at more than one level. A two-storeyed gateway opens to reveal a U-shaped courtyard. The courtyard is edged by a columned arcade three stories high. The arcades are punctuated by huge sculpted panels, and alcoves containing enormous sculptures of a variety of deities. Originally flying bridges of stone connected these galleries to central temple structures, but these have fallen.
Within the courtyard are two structures. As is traditional in Shiva temples, an image of the sacred bull Nandi fronts the central temple housing the lingam. In Cave 16, the Nandi Mandapa and main Shiva temple are each about 7 metres high, and built on two storeys. The lower stories of the Nandi Mandapa are both solid structures, decorated with elaborate illustrative carvings. The base of the temple has been carved to suggest that elephants are holding the structure aloft.
A rock bridge connects the Nandi Mandapa to the porch of the temple. The structure itself is a tall pyramidic South Indian temple. The shrine – complete with pillars, windows, inner and outer rooms, gathering halls, and an enormous stone lingam at its heart – is carved with niches, plasters, windows as well as images of deities, mithunas (erotic male and female figures) and other figures. Most of the deities at the left of the entrance are Shaivaite (followers of Lord Shiva) while on the right hand side the deities are Vaishnavaites (followers of Lord Vishnu).
There are two Dhwajasthambha (pillars with flagstaff) in the courtyard. The grand sculpture of Ravana attempting to lift Mount Kailasa, with his full might is a landmark in Indian art.
WIKIPEDIA
. . . it took ten generations to cut this temple out of a single rock! To understand my pictures please read the explanation below:
______
The Kailasa (Sanskrit: Kailāsanātha) temple is one of the largest rock-cut ancient Hindu temples located in Ellora, Maharashtra, India. It was built in the 8th century by the Rashtrakuta king Krishna I as attested in Kannada inscriptions. This is one of the 34 temples and monasteries known collectively as the Ellora Caves. These extend over more than 2 km, were dug side by side in the wall of a high basalt cliff in the complex located at Ellora. The Kailasa (cave 16) is a remarkable example of Dravidian architecture on account of its striking proportion, elaborate workmanship, architectural content, and sculptural ornamentation of rock-cut architecture. The temple was commissioned and completed between 757-783 CE, when Krishna I ruled the Rashtrakuta dynasty. It is designed to recall Mount Kailash, the home of Lord Shiva. It is a megalith carved out of one single rock.
METHOD OF CONSTRUCTION
The Kailasa Temple is notable for its vertical excavation - carvers started at the top of the original rock, and excavated downward. The traditional methods were rigidly followed by the master architect which could not have been achieved by excavating from the front. It is estimated that about 400,000 tons of rocks were scooped out over hundreds of years to construct this monolithic structure. From the chisel marks on walls of this temple, archeologists could conclude that three types of chisels were used to carve this temple.
ARCHITECTURE
All the carvings are at more than one level. A two-storeyed gateway opens to reveal a U-shaped courtyard. The courtyard is edged by a columned arcade three stories high. The arcades are punctuated by huge sculpted panels, and alcoves containing enormous sculptures of a variety of deities. Originally flying bridges of stone connected these galleries to central temple structures, but these have fallen.
Within the courtyard are two structures. As is traditional in Shiva temples, an image of the sacred bull Nandi fronts the central temple housing the lingam. In Cave 16, the Nandi Mandapa and main Shiva temple are each about 7 metres high, and built on two storeys. The lower stories of the Nandi Mandapa are both solid structures, decorated with elaborate illustrative carvings. The base of the temple has been carved to suggest that elephants are holding the structure aloft.
A rock bridge connects the Nandi Mandapa to the porch of the temple. The structure itself is a tall pyramidic South Indian temple. The shrine – complete with pillars, windows, inner and outer rooms, gathering halls, and an enormous stone lingam at its heart – is carved with niches, plasters, windows as well as images of deities, mithunas (erotic male and female figures) and other figures. Most of the deities at the left of the entrance are Shaivaite (followers of Lord Shiva) while on the right hand side the deities are Vaishnavaites (followers of Lord Vishnu).
There are two Dhwajasthambha (pillars with flagstaff) in the courtyard. The grand sculpture of Ravana attempting to lift Mount Kailasa, with his full might is a landmark in Indian art.
WIKIPEDIA
The Kailasa (Sanskrit: Kailāsanātha) temple is one of the largest rock-cut ancient Hindu temples located in Ellora, Maharashtra, India. It was built in the 8th century by the Rashtrakuta king Krishna I as attested in Kannada inscriptions. This is one of the 34 temples and monasteries known collectively as the Ellora Caves. These extend over more than 2 km, were dug side by side in the wall of a high basalt cliff in the complex located at Ellora. The Kailasa (cave 16) is a remarkable example of Dravidian architecture on account of its striking proportion, elaborate workmanship, architectural content, and sculptural ornamentation of rock-cut architecture. The temple was commissioned and completed between 757-783 CE, when Krishna I ruled the Rashtrakuta dynasty. It is designed to recall Mount Kailash, the home of Lord Shiva. It is a megalith carved out of one single rock.
METHOD OF CONSTRUCTION
The Kailasa Temple is notable for its vertical excavation - carvers started at the top of the original rock, and excavated downward. The traditional methods were rigidly followed by the master architect which could not have been achieved by excavating from the front. It is estimated that about 400,000 tons of rocks were scooped out over hundreds of years to construct this monolithic structure. From the chisel marks on walls of this temple, archeologists could conclude that three types of chisels were used to carve this temple.
ARCHITECTURE
All the carvings are at more than one level. A two-storeyed gateway opens to reveal a U-shaped courtyard. The courtyard is edged by a columned arcade three stories high. The arcades are punctuated by huge sculpted panels, and alcoves containing enormous sculptures of a variety of deities. Originally flying bridges of stone connected these galleries to central temple structures, but these have fallen.
Within the courtyard are two structures. As is traditional in Shiva temples, an image of the sacred bull Nandi fronts the central temple housing the lingam. In Cave 16, the Nandi Mandapa and main Shiva temple are each about 7 metres high, and built on two storeys. The lower stories of the Nandi Mandapa are both solid structures, decorated with elaborate illustrative carvings. The base of the temple has been carved to suggest that elephants are holding the structure aloft.
A rock bridge connects the Nandi Mandapa to the porch of the temple. The structure itself is a tall pyramidic South Indian temple. The shrine – complete with pillars, windows, inner and outer rooms, gathering halls, and an enormous stone lingam at its heart – is carved with niches, plasters, windows as well as images of deities, mithunas (erotic male and female figures) and other figures. Most of the deities at the left of the entrance are Shaivaite (followers of Lord Shiva) while on the right hand side the deities are Vaishnavaites (followers of Lord Vishnu).
There are two Dhwajasthambha (pillars with flagstaff) in the courtyard. The grand sculpture of Ravana attempting to lift Mount Kailasa, with his full might is a landmark in Indian art.
WIKIPEDIA
The Kailasa temple is the unrivaled centerpiece of Ellora. It looks like a freestanding, multi-storeyed temple complex, but it was carved out of one single rock, and covers an area double the size of Parthenon in Athens.
The construction of this cave was a feat of human genius – it entailed the removal of 200,000 tonnes of rock, and took 100 years to complete.
_____________________________________________
Ellora (\e-ˈlȯr-ə\, Marathi: वेरूळ Vērūḷa), is an archaeological site, 29 km North-West of the city of Aurangabad in the Indian state of Maharashtra built by the Rashtrakuta dynasty. It is also known as Elapura (in the Rashtrakuta literature-Kannada). Well known for its monumental caves, Ellora is a World Heritage Site. Ellora represents the epitome of Indian rock-cut architecture. The 34 "caves" are actually structures excavated out of the vertical face of the Charanandri hills. Buddhist, Hindu and Jain rock-cut temples and viharas and mathas were built between the 5th century and 10th century. The 12 Buddhist (caves 1–12), 17 Hindu (caves 13–29) and 5 Jain (caves 30–34) caves, built in proximity, demonstrate the religious harmony prevalent during this period of Indian history. It is a protected monument under the Archaeological Survey of India.
ETYMOLOGY
Ellora, also called Verula or Elura, is the cave form of the Ancient name Elapura.
HISTORY
Ellora is known for Hindu, Buddhist and Jain cave temples built during (6th and 9th centuries) the rule of the Kalachuri, Chalukya and Rashtrakuta dynasties. The Jagannatha Sabha a group of five Jain cave temples of 9th century built by Rashtrakuta.
THE BUDDHIST CAVES
These caves were built during the 5th-7th century. It was initially thought that the Buddhist caves were one of the earliest structures, created between the fifth and eighth centuries, with caves 1-5 in the first phase (400-600) and 6-12 in the later phase (mid 7th-mid 8th), but now it is clear to the modern scholars that some of the Hindu caves (27,29,21,28,19,26,20,17 and 14) precede these caves.[citation needed] The earliest Buddhist cave is Cave 6, followed by 5,2,3,5 (right wing), 4,7,8,10 and 9. Caves 11 and 12 were the last. All the Buddhist caves were constructed between 630-700.
These structures consist mostly of viharas or monasteries: large, multi-storeyed buildings carved into the mountain face, including living quarters, sleeping quarters, kitchens, and other rooms. Some of these monastery caves have shrines including carvings of Gautama Buddha, bodhisattvas and saints. In many of these caves, sculptors have endeavoured to give the stone the look of wood.
Most famous of the Buddhist caves is cave 10, (refer map) a chaitya hall (chandrashala) or 'Vishvakarma cave', popularly known as the 'Carpenter's Cave'. Beyond its multi-storeyed entry is a cathedral-like stupa hall also known as chaitya, whose ceiling has been carved to give the impression of wooden beams. At the heart of this cave is a 15-foot statue of Buddha seated in a preaching pose. Amongst other Buddhist caves, all of the first nine (caves 1–9) are monasteries. The last two caves, Do Tal (cave 11) and Tin Tal (cave 12) have three stories.
CAVE 10
Cave 10 is a vihara with eight cells, four in the back wall and four in the right wall. It had a portico in the front with a cell. Possibly served as a granary for other viharas.
THE VISHWAKARMA
The Vishwakarma (Cave 10) is the only chaitya griha amongst the Buddhist group of caves. It is locally known as Vishwakarma or Sutar ka jhopda "carpenter's hut". It follows the pattern of construction of Caves 19 and 26 of Ajanta. On stylistic grounds, the date of construction of this cave is assigned to 700 A.D. The chaitya once had a high screen wall, which is ruined at present. At the front is a rock-cut court, which is entered through a flight of steps. On either side are pillared porticos with chambers in their back walls. These were probably intended to have subsidiary shrines but not completed. The pillared verandah of the chaitya has a small shrine at either end and a single cell in the far end of the back wall. The corridor columns have massive squarish shafts and ghata-pallava (vase and foliage) capitals. The main hall is apsidal on plan and is divided into a central nave and side aisles by 28 octagonal columns with plain bracket capitals. In the apsidal end of the chaitya hall is a stupa on the face of which a colossal 3.30 m high seated Buddha in vyakhyana mudra (teaching posture) is carved. A large Bodhi tree is carved at the back. The hall has a vaulted roof in which ribs have been carved in the rock imitating the wooden ones.
THE HINDU CAVES
The Hindu caves were constructed between the middle of sixth century to the end of the eighth century. The early caves (caves 17–29) were constructed during the Kalachuri period. The work first commenced in Caves 28, 27 and 19. These were followed by two most impressive caves constructed in the early phase - Caves 29 and 21. Along with these two, work was underway at Caves 20 and 26, and slightly later at Caves 17, 19 and 28. The caves 14, 15 and 16 were constructed during the Rashtrakuta period. The work began in Caves 14 and 15 and culminated in Cave 16. All these structures represent a different style of creative vision and execution skills. Some were of such complexity that they required several generations of planning and co-ordination to complete.
THE KAILASANATHA TEMPLE
Cave 16, also known as the Kailasa temple, is the unrivaled centerpiece of Ellora. This is designed to recall Mount Kailash, the abode of Lord Shiva – looks like a freestanding, multi-storeyed temple complex, but it was carved out of one single rock, and covers an area double the size of Parthenon in Athens. Initially the temple was covered with white plaster thus even more increasing the similarity to snow-covered Mount Kailash.
All the carvings are done in more than one level. A two-storeyed gateway resembling a South Indian Gopura opens to reveal a U-shaped courtyard. The courtyard is edged by columned galleries three storeys high. The galleries are punctuated by huge sculpted panels, and alcoves containing enormous sculptures of a variety of deities. Originally flying bridges of stone connected these galleries to central temple structures, but these have fallen.
Within the courtyard are three structures. As is traditional in Shiva temples, the first is a large image of the sacred bull Nandi in front of the central temple. The central temple - Nandi Mantapa or Mandapa - houses the Lingam. The Nandi Mandapa stands on 16 pillars and is 29.3 m high. The base of the Nandi Mandapa has been carved to suggest that life-sized elephants are holding the structure aloft. A living rock bridge connects the Nandi Mandapa to the Shiva temple behind it. The temple itself is a tall pyramidal structure reminiscent of a South Indian Dravidian temple. The shrine – complete with pillars, windows, inner and outer rooms, gathering halls, and an enormous lingam at its heart – carved from living stone, is carved with niches, pilasters, windows as well as images of deities, mithunas (erotic male and female figures) and other figures. Most of the deities at the left of the entrance are Shaivaite (followers of Shiva) while on the right hand side the deities are Vaishnavaites (followers of Vishnu). There are two Dhvajastambhas (pillars with the flagstaff) in the courtyard. The grand sculpture of Ravana attempting to lift Mount Kailasa, the abode of Lord Shiva, with his full might is a landmark in Indian art. The construction of this cave was a feat of human genius – it entailed the removal of 200,000 tonnes of rock, and took 100 years to complete.
The temple is a splendid achievement of Rashtrakuta Karnata architecture. This project was started by Krishna I (757–773) of the Rashtrakuta dynasty that ruled from Manyakheta in present day Karnataka state. His rule had also spread to southern India, hence this temple was excavated in the prevailing style. Its builders modelled it on the lines of the Virupaksha Temple in Pattadakal. Being a south Indian style temple, it does not have a shikhara common to north Indian temples. – The Guide to the Architecture of the Indian Subcontinent, 1996, Takeo Kamiya, Japan Architects Academy and archaeological Survey of India.
THE DASHAVATARA
The Dashavatara (Cave 15) was begun as a Buddhist monastery. It has an open court with a free-standing monolithic mandapa at the middle and a two-storeyed excavated temple at the rear. The layout of the temple is closely related to caves 11 and 12. Large sculptural panels between the wall columns on the upper floor illustrate a wide range of themes, which include the ten avatars of Vishnu. An inscription of grant of Dantidurga is found on the back wall of the front mandapa. According to Coomaraswamy, the finest relief of this cave is the one depicting the death of Hiranyakashipu, where Vishnu in man-lion (Narasimha) form, emerges from a pillar to lay a fatal hand upon the shoulder of Hiranyakashipu.
OTHER HINDU CAVES
CAVE 21
Other notable Hindu caves are the Rameshvara (Cave 21), which has figurines of river goddesses Ganga and Yamuna at the entrance and the Dhumar Lena (Cave 29) whose design is similar to the cave temple on Elephanta Island near Mumbai. Two other caves, the Ravan ki Khai (Cave 14) and the Nilkantha (Cave 22) also have several sculptures. The rest of the Hindu caves, which include the Kumbharvada (Cave 25) and the Gopilena (Cave 27) have no significant sculptures.
The five Jain caves at Ellora belong to the ninth and tenth centuries. They all belong to the Digambara sect. Jain caves reveal specific dimensions of Jain philosophy and tradition. They reflect a strict sense of asceticism – they are not relatively large as compared to others, but they present exceptionally detailed art works. The most remarkable Jain shrines are the Chhota Kailash (cave 30), the Indra Sabha (cave 32) and the Jagannath Sabha (cave 33). Cave 31 is an unfinished four-pillared hall and a shrine. Cave 34 is a small cave, which can be approached through an opening on the left side of Cave 33. Amongst other devotional carvings, a place called samvatsarana can be found in Elora caves. Samvatsarana is of special interest to Jains, as it is a hall where the tirthankara preaches after attaining omniscience.
THE INDRA SABHA
The Indra Sabha (Cave 32) is a two storeyed cave with one more monolithic shrine in its court. It has a very fine carving of the lotus flower on the ceiling. It got the appellation "Indra Sabha" probably it is significantly ornate and also because of the sculpture of the yaksha (dedicated attendant deity) Matanga on an elephant, which was wrongly identified as that of Indra. On the upper level of the double-storied shrine excavated at the rear of the court, an U image of Ambika, the yakshini of Neminath, is found seated on her lion under a mango tree, laden with fruits.
OTHER JAIN CAVES
All other Jain caves are also characterized by intricate detailing. Many of the structures had rich paintings in the ceilings - fragments of which are still visible.
GEOLOGY OF ELLORA
Ellora occupies a relatively flat region of the Western Ghats. Ancient volcanic activity in this area created many layered basalt formations, known as Deccan Traps. During the Cretaceous, one such volcanic hill formed on the southwest-facing side of Ellora. Its vertical face made access to many layers of rock formations easier, enabling architects to pick basalt with finer grains for more detailed sculpting.
INSCRIPTIONS AT ELLORA
Several inscriptions at Ellora range from 6th century to 15th century. The best known of them is an inscription of Rashtrakuta Dantidurga (c. 753-57 A.D.) on the back wall of the front mandapa of Cave 15, which gives an account of his conquests. Inscriptions on the Kailash temple itself range from 9th to 15th century. Jain cave Jagannatha Sabha has 3 inscriptions that give the names of monks and donors. A Parshvanth temple on the hill has a 11th-century inscription that gives the name of the donor from Vardhanapura.
The Great Kailasa (Cave 16) is attributed to Krishna I (c. 757-83 A.D.), the successor and uncle of Dantidurga. A copper plate grant by Karka II (c. 812-13 A.D.) narrates that a great edifice was built on a hill by Krishnaraja at Elapura (Ellora).
The Ellora caves, unlike Ajanta, were never lost. There have been several written records that indicate that these caves were visited regularly. The earliest is that of the Arab geographer Al-Mas‘udi of the 10th century A.D. In 1352 A.D. Sultan Hasan Gangu Bahmani, who camped at the site and visited the caves. The others are by Firishta, Thevenot (1633–67), Niccolao Manucci (1653-1708), Charles Warre Malet (1794), and Seely (1824)
WIKIPEDIA
Beginning with the 2nd century B.C., and continuing into the 6th century A.D., the paintings and sculptures in the caves of Ajanta and Ellora, inspired by Buddhism and its compassionate ethos, unleashed a surge of artistic excellence unmatched in human history. These Buddhist and Jain caves are ornately carved, yet seem quiet and meditative and exude a divine energy and power.
About 107 km from the city of Aurangabad in Maharashtra, are the rock-out caves of Ajanta nestled in a panoramic gorge, in the form of a gigantic horseshoe. A set of 29 caves, Ajanta is among the finest examples of some of the earliest Buddhist architecture, cave paintings and sculptures. These caves comprise Chaitya halls or shrines, dedicated to Lord Buddha and Viharas or monasteries, used by Buddhist monks for meditation and the study of Buddhist teachings. The paintings that adorn the walls and ceilings of the caves depict incidents from the life of lord Buddha and various Buddhist divinities. Among the most interesting paintings are the Jataka tales, illustrating diverse stories relating to the previous incarnations of the Buddha as Bodhisattava, a saintly being who is destined to become the Buddha. These elaborate sculptures and paintings stand in impressive grandeur in spite of withstanding the ravages of time. Amid the beautiful images and paintings are sculptures of Buddha, calm and serene in contemplation.
The cave temples and monasteries at Ellora, excavated out of the vertical face of an escarpment, are 26 km north of Aurangabad. Sculptors, inspired by Buddhism, Jainism and Hinduism, created elaborate rock carvings. Extending in a linear arrangement, the 34 caves contain Buddhist Chaityas or halls of worship, Viharas or monasteries and Hindu and Jain temples. Spanning a period of about 600 years between the 5th and 11th century A.D., the earliest excavation here is of the Dhumar Lena (Cave 29). The most imposing excavation is, without doubt, that of the magnificent Kailasa Temple (Cave 16) which is the largest monolithic structure in the world. Known as Verul in ancient times, it has continuously attracted pilgrims through the centuries to the present day.
Declared as World Heritage Sites by UNESCO since 1983, the paintings and sculptures of Ajanta and Ellora, considered masterpieces of Buddhist religious art, have had a great influence in the development of art in India. The creative use of colour and freedom of expression used in depicting human and animal forms makes the cave paintings at Ajanta one of the high watermarks of artistic creativity. The Ellora preserved as an artistic legacy that will continue to inspire and enrich the lives of generations to come. Not only is this cave complex a unique artistic creation and an excellent example of technological exploit but also, with its sanctuaries devoted to Buddhism, Hinduism and Jainism, it illustrates the spirit of tolerance that was characteristic of ancient India.
The Kailasa (Sanskrit: Kailāsanātha) temple is one of the largest rock-cut ancient Hindu temples located in Ellora, Maharashtra, India. It was built in the 8th century by the Rashtrakuta king Krishna I as attested in Kannada inscriptions. This is one of the 34 temples and monasteries known collectively as the Ellora Caves. These extend over more than 2 km, were dug side by side in the wall of a high basalt cliff in the complex located at Ellora. The Kailasa (cave 16) is a remarkable example of Dravidian architecture on account of its striking proportion, elaborate workmanship, architectural content, and sculptural ornamentation of rock-cut architecture. The temple was commissioned and completed between 757-783 CE, when Krishna I ruled the Rashtrakuta dynasty. It is designed to recall Mount Kailash, the home of Lord Shiva. It is a megalith carved out of one single rock.
METHOD OF CONSTRUCTION
The Kailasa Temple is notable for its vertical excavation - carvers started at the top of the original rock, and excavated downward. The traditional methods were rigidly followed by the master architect which could not have been achieved by excavating from the front. It is estimated that about 400,000 tons of rocks were scooped out over hundreds of years to construct this monolithic structure. From the chisel marks on walls of this temple, archeologists could conclude that three types of chisels were used to carve this temple.
ARCHITECTURE
All the carvings are at more than one level. A two-storeyed gateway opens to reveal a U-shaped courtyard. The courtyard is edged by a columned arcade three stories high. The arcades are punctuated by huge sculpted panels, and alcoves containing enormous sculptures of a variety of deities. Originally flying bridges of stone connected these galleries to central temple structures, but these have fallen.
Within the courtyard are two structures. As is traditional in Shiva temples, an image of the sacred bull Nandi fronts the central temple housing the lingam. In Cave 16, the Nandi Mandapa and main Shiva temple are each about 7 metres high, and built on two storeys. The lower stories of the Nandi Mandapa are both solid structures, decorated with elaborate illustrative carvings. The base of the temple has been carved to suggest that elephants are holding the structure aloft.
A rock bridge connects the Nandi Mandapa to the porch of the temple. The structure itself is a tall pyramidic South Indian temple. The shrine – complete with pillars, windows, inner and outer rooms, gathering halls, and an enormous stone lingam at its heart – is carved with niches, plasters, windows as well as images of deities, mithunas (erotic male and female figures) and other figures. Most of the deities at the left of the entrance are Shaivaite (followers of Lord Shiva) while on the right hand side the deities are Vaishnavaites (followers of Lord Vishnu).
There are two Dhwajasthambha (pillars with flagstaff) in the courtyard. The grand sculpture of Ravana attempting to lift Mount Kailasa, with his full might is a landmark in Indian art.
WIKIPEDIA
The Kailasa (Sanskrit: Kailāsanātha) temple is one of the largest rock-cut ancient Hindu temples located in Ellora, Maharashtra, India. It was built in the 8th century by the Rashtrakuta king Krishna I as attested in Kannada inscriptions. This is one of the 34 temples and monasteries known collectively as the Ellora Caves. These extend over more than 2 km, were dug side by side in the wall of a high basalt cliff in the complex located at Ellora. The Kailasa (cave 16) is a remarkable example of Dravidian architecture on account of its striking proportion, elaborate workmanship, architectural content, and sculptural ornamentation of rock-cut architecture. The temple was commissioned and completed between 757-783 CE, when Krishna I ruled the Rashtrakuta dynasty. It is designed to recall Mount Kailash, the home of Lord Shiva. It is a megalith carved out of one single rock.
METHOD OF CONSTRUCTION
The Kailasa Temple is notable for its vertical excavation - carvers started at the top of the original rock, and excavated downward. The traditional methods were rigidly followed by the master architect which could not have been achieved by excavating from the front. It is estimated that about 400,000 tons of rocks were scooped out over hundreds of years to construct this monolithic structure. From the chisel marks on walls of this temple, archeologists could conclude that three types of chisels were used to carve this temple.
ARCHITECTURE
All the carvings are at more than one level. A two-storeyed gateway opens to reveal a U-shaped courtyard. The courtyard is edged by a columned arcade three stories high. The arcades are punctuated by huge sculpted panels, and alcoves containing enormous sculptures of a variety of deities. Originally flying bridges of stone connected these galleries to central temple structures, but these have fallen.
Within the courtyard are two structures. As is traditional in Shiva temples, an image of the sacred bull Nandi fronts the central temple housing the lingam. In Cave 16, the Nandi Mandapa and main Shiva temple are each about 7 metres high, and built on two storeys. The lower stories of the Nandi Mandapa are both solid structures, decorated with elaborate illustrative carvings. The base of the temple has been carved to suggest that elephants are holding the structure aloft.
A rock bridge connects the Nandi Mandapa to the porch of the temple. The structure itself is a tall pyramidic South Indian temple. The shrine – complete with pillars, windows, inner and outer rooms, gathering halls, and an enormous stone lingam at its heart – is carved with niches, plasters, windows as well as images of deities, mithunas (erotic male and female figures) and other figures. Most of the deities at the left of the entrance are Shaivaite (followers of Lord Shiva) while on the right hand side the deities are Vaishnavaites (followers of Lord Vishnu).
There are two Dhwajasthambha (pillars with flagstaff) in the courtyard. The grand sculpture of Ravana attempting to lift Mount Kailasa, with his full might is a landmark in Indian art.
WIKIPEDIA
Beginning with the 2nd century B.C., and continuing into the 6th century A.D., the paintings and sculptures in the caves of Ajanta and Ellora, inspired by Buddhism and its compassionate ethos, unleashed a surge of artistic excellence unmatched in human history. These Buddhist and Jain caves are ornately carved, yet seem quiet and meditative and exude a divine energy and power.
About 107 km from the city of Aurangabad in Maharashtra, are the rock-out caves of Ajanta nestled in a panoramic gorge, in the form of a gigantic horseshoe. A set of 29 caves, Ajanta is among the finest examples of some of the earliest Buddhist architecture, cave paintings and sculptures. These caves comprise Chaitya halls or shrines, dedicated to Lord Buddha and Viharas or monasteries, used by Buddhist monks for meditation and the study of Buddhist teachings. The paintings that adorn the walls and ceilings of the caves depict incidents from the life of lord Buddha and various Buddhist divinities. Among the most interesting paintings are the Jataka tales, illustrating diverse stories relating to the previous incarnations of the Buddha as Bodhisattava, a saintly being who is destined to become the Buddha. These elaborate sculptures and paintings stand in impressive grandeur in spite of withstanding the ravages of time. Amid the beautiful images and paintings are sculptures of Buddha, calm and serene in contemplation.
The cave temples and monasteries at Ellora, excavated out of the vertical face of an escarpment, are 26 km north of Aurangabad. Sculptors, inspired by Buddhism, Jainism and Hinduism, created elaborate rock carvings. Extending in a linear arrangement, the 34 caves contain Buddhist Chaityas or halls of worship, Viharas or monasteries and Hindu and Jain temples. Spanning a period of about 600 years between the 5th and 11th century A.D., the earliest excavation here is of the Dhumar Lena (Cave 29). The most imposing excavation is, without doubt, that of the magnificent Kailasa Temple (Cave 16) which is the largest monolithic structure in the world. Known as Verul in ancient times, it has continuously attracted pilgrims through the centuries to the present day.
Declared as World Heritage Sites by UNESCO since 1983, the paintings and sculptures of Ajanta and Ellora, considered masterpieces of Buddhist religious art, have had a great influence in the development of art in India. The creative use of colour and freedom of expression used in depicting human and animal forms makes the cave paintings at Ajanta one of the high watermarks of artistic creativity. The Ellora preserved as an artistic legacy that will continue to inspire and enrich the lives of generations to come. Not only is this cave complex a unique artistic creation and an excellent example of technological exploit but also, with its sanctuaries devoted to Buddhism, Hinduism and Jainism, it illustrates the spirit of tolerance that was characteristic of ancient India.
The Kailasa (Sanskrit: Kailāsanātha) temple is one of the largest rock-cut ancient Hindu temples located in Ellora, Maharashtra, India. It was built in the 8th century by the Rashtrakuta king Krishna I as attested in Kannada inscriptions. This is one of the 34 temples and monasteries known collectively as the Ellora Caves. These extend over more than 2 km, were dug side by side in the wall of a high basalt cliff in the complex located at Ellora. The Kailasa (cave 16) is a remarkable example of Dravidian architecture on account of its striking proportion, elaborate workmanship, architectural content, and sculptural ornamentation of rock-cut architecture. The temple was commissioned and completed between 757-783 CE, when Krishna I ruled the Rashtrakuta dynasty. It is designed to recall Mount Kailash, the home of Lord Shiva. It is a megalith carved out of one single rock.
METHOD OF CONSTRUCTION
The Kailasa Temple is notable for its vertical excavation - carvers started at the top of the original rock, and excavated downward. The traditional methods were rigidly followed by the master architect which could not have been achieved by excavating from the front. It is estimated that about 400,000 tons of rocks were scooped out over hundreds of years to construct this monolithic structure. From the chisel marks on walls of this temple, archeologists could conclude that three types of chisels were used to carve this temple.
ARCHITECTURE
All the carvings are at more than one level. A two-storeyed gateway opens to reveal a U-shaped courtyard. The courtyard is edged by a columned arcade three stories high. The arcades are punctuated by huge sculpted panels, and alcoves containing enormous sculptures of a variety of deities. Originally flying bridges of stone connected these galleries to central temple structures, but these have fallen.
Within the courtyard are two structures. As is traditional in Shiva temples, an image of the sacred bull Nandi fronts the central temple housing the lingam. In Cave 16, the Nandi Mandapa and main Shiva temple are each about 7 metres high, and built on two storeys. The lower stories of the Nandi Mandapa are both solid structures, decorated with elaborate illustrative carvings. The base of the temple has been carved to suggest that elephants are holding the structure aloft.
A rock bridge connects the Nandi Mandapa to the porch of the temple. The structure itself is a tall pyramidic South Indian temple. The shrine – complete with pillars, windows, inner and outer rooms, gathering halls, and an enormous stone lingam at its heart – is carved with niches, plasters, windows as well as images of deities, mithunas (erotic male and female figures) and other figures. Most of the deities at the left of the entrance are Shaivaite (followers of Lord Shiva) while on the right hand side the deities are Vaishnavaites (followers of Lord Vishnu).
There are two Dhwajasthambha (pillars with flagstaff) in the courtyard. The grand sculpture of Ravana attempting to lift Mount Kailasa, with his full might is a landmark in Indian art.
WIKIPEDIA
The Kailasa (Sanskrit: Kailāsanātha) temple is one of the largest rock-cut ancient Hindu temples located in Ellora, Maharashtra, India. It was built in the 8th century by the Rashtrakuta king Krishna I as attested in Kannada inscriptions. This is one of the 34 temples and monasteries known collectively as the Ellora Caves. These extend over more than 2 km, were dug side by side in the wall of a high basalt cliff in the complex located at Ellora. The Kailasa (cave 16) is a remarkable example of Dravidian architecture on account of its striking proportion, elaborate workmanship, architectural content, and sculptural ornamentation of rock-cut architecture. The temple was commissioned and completed between 757-783 CE, when Krishna I ruled the Rashtrakuta dynasty. It is designed to recall Mount Kailash, the home of Lord Shiva. It is a megalith carved out of one single rock.
METHOD OF CONSTRUCTION
The Kailasa Temple is notable for its vertical excavation - carvers started at the top of the original rock, and excavated downward. The traditional methods were rigidly followed by the master architect which could not have been achieved by excavating from the front. It is estimated that about 400,000 tons of rocks were scooped out over hundreds of years to construct this monolithic structure. From the chisel marks on walls of this temple, archeologists could conclude that three types of chisels were used to carve this temple.
ARCHITECTURE
All the carvings are at more than one level. A two-storeyed gateway opens to reveal a U-shaped courtyard. The courtyard is edged by a columned arcade three stories high. The arcades are punctuated by huge sculpted panels, and alcoves containing enormous sculptures of a variety of deities. Originally flying bridges of stone connected these galleries to central temple structures, but these have fallen.
Within the courtyard are two structures. As is traditional in Shiva temples, an image of the sacred bull Nandi fronts the central temple housing the lingam. In Cave 16, the Nandi Mandapa and main Shiva temple are each about 7 metres high, and built on two storeys. The lower stories of the Nandi Mandapa are both solid structures, decorated with elaborate illustrative carvings. The base of the temple has been carved to suggest that elephants are holding the structure aloft.
A rock bridge connects the Nandi Mandapa to the porch of the temple. The structure itself is a tall pyramidic South Indian temple. The shrine – complete with pillars, windows, inner and outer rooms, gathering halls, and an enormous stone lingam at its heart – is carved with niches, plasters, windows as well as images of deities, mithunas (erotic male and female figures) and other figures. Most of the deities at the left of the entrance are Shaivaite (followers of Lord Shiva) while on the right hand side the deities are Vaishnavaites (followers of Lord Vishnu).
There are two Dhwajasthambha (pillars with flagstaff) in the courtyard. The grand sculpture of Ravana attempting to lift Mount Kailasa, with his full might is a landmark in Indian art.
WIKIPEDIA
The Kailasa (Sanskrit: Kailāsanātha) temple is one of the largest rock-cut ancient Hindu temples located in Ellora, Maharashtra, India. It was built in the 8th century by the Rashtrakuta king Krishna I as attested in Kannada inscriptions. This is one of the 34 temples and monasteries known collectively as the Ellora Caves. These extend over more than 2 km, were dug side by side in the wall of a high basalt cliff in the complex located at Ellora. The Kailasa (cave 16) is a remarkable example of Dravidian architecture on account of its striking proportion, elaborate workmanship, architectural content, and sculptural ornamentation of rock-cut architecture. The temple was commissioned and completed between 757-783 CE, when Krishna I ruled the Rashtrakuta dynasty. It is designed to recall Mount Kailash, the home of Lord Shiva. It is a megalith carved out of one single rock.
METHOD OF CONSTRUCTION
The Kailasa Temple is notable for its vertical excavation - carvers started at the top of the original rock, and excavated downward. The traditional methods were rigidly followed by the master architect which could not have been achieved by excavating from the front. It is estimated that about 400,000 tons of rocks were scooped out over hundreds of years to construct this monolithic structure. From the chisel marks on walls of this temple, archeologists could conclude that three types of chisels were used to carve this temple.
ARCHITECTURE
All the carvings are at more than one level. A two-storeyed gateway opens to reveal a U-shaped courtyard. The courtyard is edged by a columned arcade three stories high. The arcades are punctuated by huge sculpted panels, and alcoves containing enormous sculptures of a variety of deities. Originally flying bridges of stone connected these galleries to central temple structures, but these have fallen.
Within the courtyard are two structures. As is traditional in Shiva temples, an image of the sacred bull Nandi fronts the central temple housing the lingam. In Cave 16, the Nandi Mandapa and main Shiva temple are each about 7 metres high, and built on two storeys. The lower stories of the Nandi Mandapa are both solid structures, decorated with elaborate illustrative carvings. The base of the temple has been carved to suggest that elephants are holding the structure aloft.
A rock bridge connects the Nandi Mandapa to the porch of the temple. The structure itself is a tall pyramidic South Indian temple. The shrine – complete with pillars, windows, inner and outer rooms, gathering halls, and an enormous stone lingam at its heart – is carved with niches, plasters, windows as well as images of deities, mithunas (erotic male and female figures) and other figures. Most of the deities at the left of the entrance are Shaivaite (followers of Lord Shiva) while on the right hand side the deities are Vaishnavaites (followers of Lord Vishnu).
There are two Dhwajasthambha (pillars with flagstaff) in the courtyard. The grand sculpture of Ravana attempting to lift Mount Kailasa, with his full might is a landmark in Indian art.
WIKIPEDIA
NAIMISHARANYA
Naimisaranyam, also known as Neemsar, Nimsar or Nimkhar is a Hindu temple dedicated to Vishnu located in the north Indian state of Uttar Pradesh.[1] It is one of the Divya Desams, the 108 temples of Vishnu revered in Nalayira Divya Prabandham by the 12 poet saints, or Alwars. The temple is believed to be of significant antiquity with contributions at different times from the ruling kings. The temple is counted as one of the eight temples of Vishnu that self-manifested and is classified as Swayamvyaktha Kshetra. The temple is open till 6pm. The holy tank Chankra Kunda is associated with the temple and it is a pilgrimage centre where people take a holy dip during festive occasions
Sage Narada is believed to have searched for the best theertha (water body) in three worlds. He went to Kailasa, the abode of Shiva, then to Parkadal, the abode of Vishnu and finally landed in the water body in the Naimisha Forest. The central deity is also believed to be worshipped by sudharma and devas(celestical deities).[1][2]
Indra, the king of the devas, was once driven out of devaloka by an asuranamed Vritra. The asura was the recipient of a boon whereby he could not be killed by any weapon that was known till the date of his receiving the boon and additionally that no weapon made of wood or metal could harm him. Indra, who lost all hope of recovering his kingdom went to seek the aid of Vishnu. Vishnu revealed to Indra that only the weapon made from the bones of the sageDadhichi would defeat Vritra. Indra and the other devas therefore approached the sage, whom Indra had once beheaded, and asked him for his aid in defeating Vritra. Dadhichi acceded to the devas' request but said that he wished that he had time to go on a pilgrimage to all the holy rivers before he gave up his life for them. Indra then brought together all the waters of the holy rivers to Naimisaranya, thereby allowing the sage to have his wish fulfilled without a further loss of time. Dadhichi is then said to have given up his life by the art of yoga after which the devas fashioned the Vajrayudha from his spine. This weapon was then used to defeat the asura, allowing Indra to reclaim his place as the king of devaloka.[3]
As told in another legend, when sages were planning to perform penance, Brahma, the god of creation, brought out a ring from darba grass. He asked the sages to perform penance at the place where the ring fell, which is believed to be Naimisaranya. The sages performed penance and at the end of it, Vishnu appeared to the sages and accepted their offerings. It is believed that the forest still has Vishnu and all sages as trees
Naimisaranyam is located at the junction of the roads from Sitapur and Khairabad, 32 km from Sitapur and 42 km from the Sandila railway station, 45 miles north of Lucknow in Uttar Pradesh. Naimisaranya is also known as Nimsar or Nimkhar and is located on the left bank of the river Gomati.[5] The sacred well, namely Chakra Kunda is believed to have started from the weapon of Vishnu, Chakra. There are shrines dedicated to Chakranarayana, Ganesh, Rama, Lakshman
This place has also been visited by Sankaracharya[8] and the famous poet, Surdas resided here. Suthar, the author of 18 puranas is believed to have lived here and presented his sayings to the sages. The central deity is believed to have presided over the forest and hence the puja (rituals) are done to the forest.[2]
The temple is counted as one of the eight temples of Vishnu that self-manifested and is classified as Swayamvyaktha Kshetra.[9] (Seven other temples in the line are Srirangam Ranganathaswamy temple, Bhu Varaha Swamy temple, Tirumala Venkateswara Temple, and Vanamamalai Perumal Temple in South India and Saligrama, Pushkar and Badrinath Temple in North India).[10] Naimisaranya temple is revered in Nalayira Divya Prabandham, the 7th–9th century Vaishnava canon, by Thirumangai Azhwar in ten hymns. The temple is classified as a divyadesam, the 108 Vishnu temples that are revered in the Vaishnava canon.
Every new moon day, a large number of people purify themselves with a dip in the holy well. If the new moon falls on a Monday, it is believed that a holy bath in the well and offering to the presiding deity Lalitha will wash away all the sins committed in their lifetime
By Kailash Mansarovar Foundation Swami Bikash Giri www.sumeruparvat.com , www.naturalitem.com
The Kailasa (Sanskrit: Kailāsanātha) temple is one of the largest rock-cut ancient Hindu temples located in Ellora, Maharashtra, India. It was built in the 8th century by the Rashtrakuta king Krishna I as attested in Kannada inscriptions. This is one of the 34 temples and monasteries known collectively as the Ellora Caves. These extend over more than 2 km, were dug side by side in the wall of a high basalt cliff in the complex located at Ellora. The Kailasa (cave 16) is a remarkable example of Dravidian architecture on account of its striking proportion, elaborate workmanship, architectural content, and sculptural ornamentation of rock-cut architecture. The temple was commissioned and completed between 757-783 CE, when Krishna I ruled the Rashtrakuta dynasty. It is designed to recall Mount Kailash, the home of Lord Shiva. It is a megalith carved out of one single rock.
METHOD OF CONSTRUCTION
The Kailasa Temple is notable for its vertical excavation - carvers started at the top of the original rock, and excavated downward. The traditional methods were rigidly followed by the master architect which could not have been achieved by excavating from the front. It is estimated that about 400,000 tons of rocks were scooped out over hundreds of years to construct this monolithic structure. From the chisel marks on walls of this temple, archeologists could conclude that three types of chisels were used to carve this temple.
ARCHITECTURE
All the carvings are at more than one level. A two-storeyed gateway opens to reveal a U-shaped courtyard. The courtyard is edged by a columned arcade three stories high. The arcades are punctuated by huge sculpted panels, and alcoves containing enormous sculptures of a variety of deities. Originally flying bridges of stone connected these galleries to central temple structures, but these have fallen.
Within the courtyard are two structures. As is traditional in Shiva temples, an image of the sacred bull Nandi fronts the central temple housing the lingam. In Cave 16, the Nandi Mandapa and main Shiva temple are each about 7 metres high, and built on two storeys. The lower stories of the Nandi Mandapa are both solid structures, decorated with elaborate illustrative carvings. The base of the temple has been carved to suggest that elephants are holding the structure aloft.
A rock bridge connects the Nandi Mandapa to the porch of the temple. The structure itself is a tall pyramidic South Indian temple. The shrine – complete with pillars, windows, inner and outer rooms, gathering halls, and an enormous stone lingam at its heart – is carved with niches, plasters, windows as well as images of deities, mithunas (erotic male and female figures) and other figures. Most of the deities at the left of the entrance are Shaivaite (followers of Lord Shiva) while on the right hand side the deities are Vaishnavaites (followers of Lord Vishnu).
There are two Dhwajasthambha (pillars with flagstaff) in the courtyard. The grand sculpture of Ravana attempting to lift Mount Kailasa, with his full might is a landmark in Indian art.
WIKIPEDIA
The Kailasa (Sanskrit: Kailāsanātha) temple is one of the largest rock-cut ancient Hindu temples located in Ellora, Maharashtra, India. It was built in the 8th century by the Rashtrakuta king Krishna I as attested in Kannada inscriptions. This is one of the 34 temples and monasteries known collectively as the Ellora Caves. These extend over more than 2 km, were dug side by side in the wall of a high basalt cliff in the complex located at Ellora. The Kailasa (cave 16) is a remarkable example of Dravidian architecture on account of its striking proportion, elaborate workmanship, architectural content, and sculptural ornamentation of rock-cut architecture. The temple was commissioned and completed between 757-783 CE, when Krishna I ruled the Rashtrakuta dynasty. It is designed to recall Mount Kailash, the home of Lord Shiva. It is a megalith carved out of one single rock.
METHOD OF CONSTRUCTION
The Kailasa Temple is notable for its vertical excavation - carvers started at the top of the original rock, and excavated downward. The traditional methods were rigidly followed by the master architect which could not have been achieved by excavating from the front. It is estimated that about 400,000 tons of rocks were scooped out over hundreds of years to construct this monolithic structure. From the chisel marks on walls of this temple, archeologists could conclude that three types of chisels were used to carve this temple.
ARCHITECTURE
All the carvings are at more than one level. A two-storeyed gateway opens to reveal a U-shaped courtyard. The courtyard is edged by a columned arcade three stories high. The arcades are punctuated by huge sculpted panels, and alcoves containing enormous sculptures of a variety of deities. Originally flying bridges of stone connected these galleries to central temple structures, but these have fallen.
Within the courtyard are two structures. As is traditional in Shiva temples, an image of the sacred bull Nandi fronts the central temple housing the lingam. In Cave 16, the Nandi Mandapa and main Shiva temple are each about 7 metres high, and built on two storeys. The lower stories of the Nandi Mandapa are both solid structures, decorated with elaborate illustrative carvings. The base of the temple has been carved to suggest that elephants are holding the structure aloft.
A rock bridge connects the Nandi Mandapa to the porch of the temple. The structure itself is a tall pyramidic South Indian temple. The shrine – complete with pillars, windows, inner and outer rooms, gathering halls, and an enormous stone lingam at its heart – is carved with niches, plasters, windows as well as images of deities, mithunas (erotic male and female figures) and other figures. Most of the deities at the left of the entrance are Shaivaite (followers of Lord Shiva) while on the right hand side the deities are Vaishnavaites (followers of Lord Vishnu).
There are two Dhwajasthambha (pillars with flagstaff) in the courtyard. The grand sculpture of Ravana attempting to lift Mount Kailasa, with his full might is a landmark in Indian art.
WIKIPEDIA
The Kailasa (Sanskrit: Kailāsanātha) temple is one of the largest rock-cut ancient Hindu temples located in Ellora, Maharashtra, India. It was built in the 8th century by the Rashtrakuta king Krishna I as attested in Kannada inscriptions. This is one of the 34 temples and monasteries known collectively as the Ellora Caves. These extend over more than 2 km, were dug side by side in the wall of a high basalt cliff in the complex located at Ellora. The Kailasa (cave 16) is a remarkable example of Dravidian architecture on account of its striking proportion, elaborate workmanship, architectural content, and sculptural ornamentation of rock-cut architecture. The temple was commissioned and completed between 757-783 CE, when Krishna I ruled the Rashtrakuta dynasty. It is designed to recall Mount Kailash, the home of Lord Shiva. It is a megalith carved out of one single rock.
METHOD OF CONSTRUCTION
The Kailasa Temple is notable for its vertical excavation - carvers started at the top of the original rock, and excavated downward. The traditional methods were rigidly followed by the master architect which could not have been achieved by excavating from the front. It is estimated that about 400,000 tons of rocks were scooped out over hundreds of years to construct this monolithic structure. From the chisel marks on walls of this temple, archeologists could conclude that three types of chisels were used to carve this temple.
ARCHITECTURE
All the carvings are at more than one level. A two-storeyed gateway opens to reveal a U-shaped courtyard. The courtyard is edged by a columned arcade three stories high. The arcades are punctuated by huge sculpted panels, and alcoves containing enormous sculptures of a variety of deities. Originally flying bridges of stone connected these galleries to central temple structures, but these have fallen.
Within the courtyard are two structures. As is traditional in Shiva temples, an image of the sacred bull Nandi fronts the central temple housing the lingam. In Cave 16, the Nandi Mandapa and main Shiva temple are each about 7 metres high, and built on two storeys. The lower stories of the Nandi Mandapa are both solid structures, decorated with elaborate illustrative carvings. The base of the temple has been carved to suggest that elephants are holding the structure aloft.
A rock bridge connects the Nandi Mandapa to the porch of the temple. The structure itself is a tall pyramidic South Indian temple. The shrine – complete with pillars, windows, inner and outer rooms, gathering halls, and an enormous stone lingam at its heart – is carved with niches, plasters, windows as well as images of deities, mithunas (erotic male and female figures) and other figures. Most of the deities at the left of the entrance are Shaivaite (followers of Lord Shiva) while on the right hand side the deities are Vaishnavaites (followers of Lord Vishnu).
There are two Dhwajasthambha (pillars with flagstaff) in the courtyard. The grand sculpture of Ravana attempting to lift Mount Kailasa, with his full might is a landmark in Indian art.
WIKIPEDIA
Right beneath the massive Shiva idol is a cave carved with murals narrating the origin of Murudeshwar.
Ravana is lifting Mount Kailasa for his Mother.
Read the entire story here : en.wikipedia.org/wiki/Murudeshwara
Also see : Ravana's Penance 1/6
NAIMISHARANYA
Naimisaranyam, also known as Neemsar, Nimsar or Nimkhar is a Hindu temple dedicated to Vishnu located in the north Indian state of Uttar Pradesh.[1] It is one of the Divya Desams, the 108 temples of Vishnu revered in Nalayira Divya Prabandham by the 12 poet saints, or Alwars. The temple is believed to be of significant antiquity with contributions at different times from the ruling kings. The temple is counted as one of the eight temples of Vishnu that self-manifested and is classified as Swayamvyaktha Kshetra. The temple is open till 6pm. The holy tank Chankra Kunda is associated with the temple and it is a pilgrimage centre where people take a holy dip during festive occasions
Sage Narada is believed to have searched for the best theertha (water body) in three worlds. He went to Kailasa, the abode of Shiva, then to Parkadal, the abode of Vishnu and finally landed in the water body in the Naimisha Forest. The central deity is also believed to be worshipped by sudharma and devas(celestical deities).[1][2]
Indra, the king of the devas, was once driven out of devaloka by an asuranamed Vritra. The asura was the recipient of a boon whereby he could not be killed by any weapon that was known till the date of his receiving the boon and additionally that no weapon made of wood or metal could harm him. Indra, who lost all hope of recovering his kingdom went to seek the aid of Vishnu. Vishnu revealed to Indra that only the weapon made from the bones of the sageDadhichi would defeat Vritra. Indra and the other devas therefore approached the sage, whom Indra had once beheaded, and asked him for his aid in defeating Vritra. Dadhichi acceded to the devas' request but said that he wished that he had time to go on a pilgrimage to all the holy rivers before he gave up his life for them. Indra then brought together all the waters of the holy rivers to Naimisaranya, thereby allowing the sage to have his wish fulfilled without a further loss of time. Dadhichi is then said to have given up his life by the art of yoga after which the devas fashioned the Vajrayudha from his spine. This weapon was then used to defeat the asura, allowing Indra to reclaim his place as the king of devaloka.[3]
As told in another legend, when sages were planning to perform penance, Brahma, the god of creation, brought out a ring from darba grass. He asked the sages to perform penance at the place where the ring fell, which is believed to be Naimisaranya. The sages performed penance and at the end of it, Vishnu appeared to the sages and accepted their offerings. It is believed that the forest still has Vishnu and all sages as trees
Naimisaranyam is located at the junction of the roads from Sitapur and Khairabad, 32 km from Sitapur and 42 km from the Sandila railway station, 45 miles north of Lucknow in Uttar Pradesh. Naimisaranya is also known as Nimsar or Nimkhar and is located on the left bank of the river Gomati.[5] The sacred well, namely Chakra Kunda is believed to have started from the weapon of Vishnu, Chakra. There are shrines dedicated to Chakranarayana, Ganesh, Rama, Lakshman
This place has also been visited by Sankaracharya[8] and the famous poet, Surdas resided here. Suthar, the author of 18 puranas is believed to have lived here and presented his sayings to the sages. The central deity is believed to have presided over the forest and hence the puja (rituals) are done to the forest.[2]
The temple is counted as one of the eight temples of Vishnu that self-manifested and is classified as Swayamvyaktha Kshetra.[9] (Seven other temples in the line are Srirangam Ranganathaswamy temple, Bhu Varaha Swamy temple, Tirumala Venkateswara Temple, and Vanamamalai Perumal Temple in South India and Saligrama, Pushkar and Badrinath Temple in North India).[10] Naimisaranya temple is revered in Nalayira Divya Prabandham, the 7th–9th century Vaishnava canon, by Thirumangai Azhwar in ten hymns. The temple is classified as a divyadesam, the 108 Vishnu temples that are revered in the Vaishnava canon.
Every new moon day, a large number of people purify themselves with a dip in the holy well. If the new moon falls on a Monday, it is believed that a holy bath in the well and offering to the presiding deity Lalitha will wash away all the sins committed in their lifetime
By Kailash Mansarovar Foundation Swami Bikash Giri www.sumeruparvat.com , www.naturalitem.com
. . . it took ten generations to cut this temple out of a single rock! To understand my pictures please read the explanation below:
______
The Kailasa (Sanskrit: Kailāsanātha) temple is one of the largest rock-cut ancient Hindu temples located in Ellora, Maharashtra, India. It was built in the 8th century by the Rashtrakuta king Krishna I as attested in Kannada inscriptions. This is one of the 34 temples and monasteries known collectively as the Ellora Caves. These extend over more than 2 km, were dug side by side in the wall of a high basalt cliff in the complex located at Ellora. The Kailasa (cave 16) is a remarkable example of Dravidian architecture on account of its striking proportion, elaborate workmanship, architectural content, and sculptural ornamentation of rock-cut architecture. The temple was commissioned and completed between 757-783 CE, when Krishna I ruled the Rashtrakuta dynasty. It is designed to recall Mount Kailash, the home of Lord Shiva. It is a megalith carved out of one single rock.
METHOD OF CONSTRUCTION
The Kailasa Temple is notable for its vertical excavation - carvers started at the top of the original rock, and excavated downward. The traditional methods were rigidly followed by the master architect which could not have been achieved by excavating from the front. It is estimated that about 400,000 tons of rocks were scooped out over hundreds of years to construct this monolithic structure. From the chisel marks on walls of this temple, archeologists could conclude that three types of chisels were used to carve this temple.
ARCHITECTURE
All the carvings are at more than one level. A two-storeyed gateway opens to reveal a U-shaped courtyard. The courtyard is edged by a columned arcade three stories high. The arcades are punctuated by huge sculpted panels, and alcoves containing enormous sculptures of a variety of deities. Originally flying bridges of stone connected these galleries to central temple structures, but these have fallen.
Within the courtyard are two structures. As is traditional in Shiva temples, an image of the sacred bull Nandi fronts the central temple housing the lingam. In Cave 16, the Nandi Mandapa and main Shiva temple are each about 7 metres high, and built on two storeys. The lower stories of the Nandi Mandapa are both solid structures, decorated with elaborate illustrative carvings. The base of the temple has been carved to suggest that elephants are holding the structure aloft.
A rock bridge connects the Nandi Mandapa to the porch of the temple. The structure itself is a tall pyramidic South Indian temple. The shrine – complete with pillars, windows, inner and outer rooms, gathering halls, and an enormous stone lingam at its heart – is carved with niches, plasters, windows as well as images of deities, mithunas (erotic male and female figures) and other figures. Most of the deities at the left of the entrance are Shaivaite (followers of Lord Shiva) while on the right hand side the deities are Vaishnavaites (followers of Lord Vishnu).
There are two Dhwajasthambha (pillars with flagstaff) in the courtyard. The grand sculpture of Ravana attempting to lift Mount Kailasa, with his full might is a landmark in Indian art.
WIKIPEDIA
The Kailasa (Sanskrit: Kailāsanātha) temple is one of the largest rock-cut ancient Hindu temples located in Ellora, Maharashtra, India. It was built in the 8th century by the Rashtrakuta king Krishna I as attested in Kannada inscriptions. This is one of the 34 temples and monasteries known collectively as the Ellora Caves. These extend over more than 2 km, were dug side by side in the wall of a high basalt cliff in the complex located at Ellora. The Kailasa (cave 16) is a remarkable example of Dravidian architecture on account of its striking proportion, elaborate workmanship, architectural content, and sculptural ornamentation of rock-cut architecture. The temple was commissioned and completed between 757-783 CE, when Krishna I ruled the Rashtrakuta dynasty. It is designed to recall Mount Kailash, the home of Lord Shiva. It is a megalith carved out of one single rock.
METHOD OF CONSTRUCTION
The Kailasa Temple is notable for its vertical excavation - carvers started at the top of the original rock, and excavated downward. The traditional methods were rigidly followed by the master architect which could not have been achieved by excavating from the front. It is estimated that about 400,000 tons of rocks were scooped out over hundreds of years to construct this monolithic structure. From the chisel marks on walls of this temple, archeologists could conclude that three types of chisels were used to carve this temple.
ARCHITECTURE
All the carvings are at more than one level. A two-storeyed gateway opens to reveal a U-shaped courtyard. The courtyard is edged by a columned arcade three stories high. The arcades are punctuated by huge sculpted panels, and alcoves containing enormous sculptures of a variety of deities. Originally flying bridges of stone connected these galleries to central temple structures, but these have fallen.
Within the courtyard are two structures. As is traditional in Shiva temples, an image of the sacred bull Nandi fronts the central temple housing the lingam. In Cave 16, the Nandi Mandapa and main Shiva temple are each about 7 metres high, and built on two storeys. The lower stories of the Nandi Mandapa are both solid structures, decorated with elaborate illustrative carvings. The base of the temple has been carved to suggest that elephants are holding the structure aloft.
A rock bridge connects the Nandi Mandapa to the porch of the temple. The structure itself is a tall pyramidic South Indian temple. The shrine – complete with pillars, windows, inner and outer rooms, gathering halls, and an enormous stone lingam at its heart – is carved with niches, plasters, windows as well as images of deities, mithunas (erotic male and female figures) and other figures. Most of the deities at the left of the entrance are Shaivaite (followers of Lord Shiva) while on the right hand side the deities are Vaishnavaites (followers of Lord Vishnu).
There are two Dhwajasthambha (pillars with flagstaff) in the courtyard. The grand sculpture of Ravana attempting to lift Mount Kailasa, with his full might is a landmark in Indian art.
WIKIPEDIA
The Kailasa (Sanskrit: Kailāsanātha) temple is one of the largest rock-cut ancient Hindu temples located in Ellora, Maharashtra, India. It was built in the 8th century by the Rashtrakuta king Krishna I as attested in Kannada inscriptions. This is one of the 34 temples and monasteries known collectively as the Ellora Caves. These extend over more than 2 km, were dug side by side in the wall of a high basalt cliff in the complex located at Ellora. The Kailasa (cave 16) is a remarkable example of Dravidian architecture on account of its striking proportion, elaborate workmanship, architectural content, and sculptural ornamentation of rock-cut architecture. The temple was commissioned and completed between 757-783 CE, when Krishna I ruled the Rashtrakuta dynasty. It is designed to recall Mount Kailash, the home of Lord Shiva. It is a megalith carved out of one single rock.
METHOD OF CONSTRUCTION
The Kailasa Temple is notable for its vertical excavation - carvers started at the top of the original rock, and excavated downward. The traditional methods were rigidly followed by the master architect which could not have been achieved by excavating from the front. It is estimated that about 400,000 tons of rocks were scooped out over hundreds of years to construct this monolithic structure. From the chisel marks on walls of this temple, archeologists could conclude that three types of chisels were used to carve this temple.
ARCHITECTURE
All the carvings are at more than one level. A two-storeyed gateway opens to reveal a U-shaped courtyard. The courtyard is edged by a columned arcade three stories high. The arcades are punctuated by huge sculpted panels, and alcoves containing enormous sculptures of a variety of deities. Originally flying bridges of stone connected these galleries to central temple structures, but these have fallen.
Within the courtyard are two structures. As is traditional in Shiva temples, an image of the sacred bull Nandi fronts the central temple housing the lingam. In Cave 16, the Nandi Mandapa and main Shiva temple are each about 7 metres high, and built on two storeys. The lower stories of the Nandi Mandapa are both solid structures, decorated with elaborate illustrative carvings. The base of the temple has been carved to suggest that elephants are holding the structure aloft.
A rock bridge connects the Nandi Mandapa to the porch of the temple. The structure itself is a tall pyramidic South Indian temple. The shrine – complete with pillars, windows, inner and outer rooms, gathering halls, and an enormous stone lingam at its heart – is carved with niches, plasters, windows as well as images of deities, mithunas (erotic male and female figures) and other figures. Most of the deities at the left of the entrance are Shaivaite (followers of Lord Shiva) while on the right hand side the deities are Vaishnavaites (followers of Lord Vishnu).
There are two Dhwajasthambha (pillars with flagstaff) in the courtyard. The grand sculpture of Ravana attempting to lift Mount Kailasa, with his full might is a landmark in Indian art.
WIKIPEDIA
The Kailasa (Sanskrit: Kailāsanātha) temple is one of the largest rock-cut ancient Hindu temples located in Ellora, Maharashtra, India. It was built in the 8th century by the Rashtrakuta king Krishna I as attested in Kannada inscriptions. This is one of the 34 temples and monasteries known collectively as the Ellora Caves. These extend over more than 2 km, were dug side by side in the wall of a high basalt cliff in the complex located at Ellora. The Kailasa (cave 16) is a remarkable example of Dravidian architecture on account of its striking proportion, elaborate workmanship, architectural content, and sculptural ornamentation of rock-cut architecture. The temple was commissioned and completed between 757-783 CE, when Krishna I ruled the Rashtrakuta dynasty. It is designed to recall Mount Kailash, the home of Lord Shiva. It is a megalith carved out of one single rock.
METHOD OF CONSTRUCTION
The Kailasa Temple is notable for its vertical excavation - carvers started at the top of the original rock, and excavated downward. The traditional methods were rigidly followed by the master architect which could not have been achieved by excavating from the front. It is estimated that about 400,000 tons of rocks were scooped out over hundreds of years to construct this monolithic structure. From the chisel marks on walls of this temple, archeologists could conclude that three types of chisels were used to carve this temple.
ARCHITECTURE
All the carvings are at more than one level. A two-storeyed gateway opens to reveal a U-shaped courtyard. The courtyard is edged by a columned arcade three stories high. The arcades are punctuated by huge sculpted panels, and alcoves containing enormous sculptures of a variety of deities. Originally flying bridges of stone connected these galleries to central temple structures, but these have fallen.
Within the courtyard are two structures. As is traditional in Shiva temples, an image of the sacred bull Nandi fronts the central temple housing the lingam. In Cave 16, the Nandi Mandapa and main Shiva temple are each about 7 metres high, and built on two storeys. The lower stories of the Nandi Mandapa are both solid structures, decorated with elaborate illustrative carvings. The base of the temple has been carved to suggest that elephants are holding the structure aloft.
A rock bridge connects the Nandi Mandapa to the porch of the temple. The structure itself is a tall pyramidic South Indian temple. The shrine – complete with pillars, windows, inner and outer rooms, gathering halls, and an enormous stone lingam at its heart – is carved with niches, plasters, windows as well as images of deities, mithunas (erotic male and female figures) and other figures. Most of the deities at the left of the entrance are Shaivaite (followers of Lord Shiva) while on the right hand side the deities are Vaishnavaites (followers of Lord Vishnu).
There are two Dhwajasthambha (pillars with flagstaff) in the courtyard. The grand sculpture of Ravana attempting to lift Mount Kailasa, with his full might is a landmark in Indian art.
WIKIPEDIA
The Kailasa (Sanskrit: Kailāsanātha) temple is one of the largest rock-cut ancient Hindu temples located in Ellora, Maharashtra, India. It was built in the 8th century by the Rashtrakuta king Krishna I as attested in Kannada inscriptions. This is one of the 34 temples and monasteries known collectively as the Ellora Caves. These extend over more than 2 km, were dug side by side in the wall of a high basalt cliff in the complex located at Ellora. The Kailasa (cave 16) is a remarkable example of Dravidian architecture on account of its striking proportion, elaborate workmanship, architectural content, and sculptural ornamentation of rock-cut architecture. The temple was commissioned and completed between 757-783 CE, when Krishna I ruled the Rashtrakuta dynasty. It is designed to recall Mount Kailash, the home of Lord Shiva. It is a megalith carved out of one single rock.
METHOD OF CONSTRUCTION
The Kailasa Temple is notable for its vertical excavation - carvers started at the top of the original rock, and excavated downward. The traditional methods were rigidly followed by the master architect which could not have been achieved by excavating from the front. It is estimated that about 400,000 tons of rocks were scooped out over hundreds of years to construct this monolithic structure. From the chisel marks on walls of this temple, archeologists could conclude that three types of chisels were used to carve this temple.
ARCHITECTURE
All the carvings are at more than one level. A two-storeyed gateway opens to reveal a U-shaped courtyard. The courtyard is edged by a columned arcade three stories high. The arcades are punctuated by huge sculpted panels, and alcoves containing enormous sculptures of a variety of deities. Originally flying bridges of stone connected these galleries to central temple structures, but these have fallen.
Within the courtyard are two structures. As is traditional in Shiva temples, an image of the sacred bull Nandi fronts the central temple housing the lingam. In Cave 16, the Nandi Mandapa and main Shiva temple are each about 7 metres high, and built on two storeys. The lower stories of the Nandi Mandapa are both solid structures, decorated with elaborate illustrative carvings. The base of the temple has been carved to suggest that elephants are holding the structure aloft.
A rock bridge connects the Nandi Mandapa to the porch of the temple. The structure itself is a tall pyramidic South Indian temple. The shrine – complete with pillars, windows, inner and outer rooms, gathering halls, and an enormous stone lingam at its heart – is carved with niches, plasters, windows as well as images of deities, mithunas (erotic male and female figures) and other figures. Most of the deities at the left of the entrance are Shaivaite (followers of Lord Shiva) while on the right hand side the deities are Vaishnavaites (followers of Lord Vishnu).
There are two Dhwajasthambha (pillars with flagstaff) in the courtyard. The grand sculpture of Ravana attempting to lift Mount Kailasa, with his full might is a landmark in Indian art.
WIKIPEDIA
The Kailasa (Sanskrit: Kailāsanātha) temple is one of the largest rock-cut ancient Hindu temples located in Ellora, Maharashtra, India. It was built in the 8th century by the Rashtrakuta king Krishna I as attested in Kannada inscriptions. This is one of the 34 temples and monasteries known collectively as the Ellora Caves. These extend over more than 2 km, were dug side by side in the wall of a high basalt cliff in the complex located at Ellora. The Kailasa (cave 16) is a remarkable example of Dravidian architecture on account of its striking proportion, elaborate workmanship, architectural content, and sculptural ornamentation of rock-cut architecture. The temple was commissioned and completed between 757-783 CE, when Krishna I ruled the Rashtrakuta dynasty. It is designed to recall Mount Kailash, the home of Lord Shiva. It is a megalith carved out of one single rock.
METHOD OF CONSTRUCTION
The Kailasa Temple is notable for its vertical excavation - carvers started at the top of the original rock, and excavated downward. The traditional methods were rigidly followed by the master architect which could not have been achieved by excavating from the front. It is estimated that about 400,000 tons of rocks were scooped out over hundreds of years to construct this monolithic structure. From the chisel marks on walls of this temple, archeologists could conclude that three types of chisels were used to carve this temple.
ARCHITECTURE
All the carvings are at more than one level. A two-storeyed gateway opens to reveal a U-shaped courtyard. The courtyard is edged by a columned arcade three stories high. The arcades are punctuated by huge sculpted panels, and alcoves containing enormous sculptures of a variety of deities. Originally flying bridges of stone connected these galleries to central temple structures, but these have fallen.
Within the courtyard are two structures. As is traditional in Shiva temples, an image of the sacred bull Nandi fronts the central temple housing the lingam. In Cave 16, the Nandi Mandapa and main Shiva temple are each about 7 metres high, and built on two storeys. The lower stories of the Nandi Mandapa are both solid structures, decorated with elaborate illustrative carvings. The base of the temple has been carved to suggest that elephants are holding the structure aloft.
A rock bridge connects the Nandi Mandapa to the porch of the temple. The structure itself is a tall pyramidic South Indian temple. The shrine – complete with pillars, windows, inner and outer rooms, gathering halls, and an enormous stone lingam at its heart – is carved with niches, plasters, windows as well as images of deities, mithunas (erotic male and female figures) and other figures. Most of the deities at the left of the entrance are Shaivaite (followers of Lord Shiva) while on the right hand side the deities are Vaishnavaites (followers of Lord Vishnu).
There are two Dhwajasthambha (pillars with flagstaff) in the courtyard. The grand sculpture of Ravana attempting to lift Mount Kailasa, with his full might is a landmark in Indian art.
WIKIPEDIA
Kailasa Temple at Ellora Caves - A UNESCO Site. Two Indian women walk within the giant temple of Cave 16.
The Kailaśa temple: Cave 16, Ellora Caves
The Kailash (Kailāśa) or Kailasanatha temple (Kailāsanātha) is one of the largest rock-cut ancient Hindu temples located in Ellora, Maharashtra, India. A megalith carved out of one single rock, it is considered one of the most remarkable cave temples in India because of its size, architecture and sculptural treatment.
The Kailasanatha temple (Cave 16) is one of the 32 cave temples and monasteries known collectively as the Ellora Caves. Its construction is generally attributed to the 8th century Rashtrakuta king Krishna I in 756-773 CE. The temple architecture shows traces of Pallava and Chalukya styles.
The Kailasa temple lacks a dedicatory inscription, but there is no doubt that it was commissioned by a Rashtrakuta ruler. Its construction is generally attributed to the Rashtrakuta king Krishna I (r. 756-773 CE), based on two epigraphs that link the temple to "Krishnaraja"
The Baroda copper-plate inscription (c. 812-813 CE) of Karkaraja II (a ruler of a Rashtrakuta branch of Gujarat) records the grant of a village in present-day Gujarat. It mentions Krishnaraja as the patron of Kailasanatha, and also mentions a Shiva temple at Elapura (Ellora). It states that the king constructed a temple so wonderous that even the gods and the architect were astonished. Most scholars believe that this is a reference to the Kailasa Shiva temple at Elora.
The Kadamba grant of Govinda Prabhutavarsha similarly appears to credit Krishnaraja with the construction of the temple.
Cave 16, also known as the Kailasa temple, is considered one of the most remarkable cave temples in India because of its size, architecture and having being entirely carved out of a single living rock.
The Kailasha temple is dedicated to Shiva, in a structure reminiscent of mount Kailash. It is modeled like other Hindu temples, with a gateway, an assembly hall, a multi-storey main temple surrounded by a galaxy of shrines all of which are set using the square principle, integrated space for circumambulation, a garbha-grihya (sanctum sanctorum) wherein is the linga-yoni and a spire shaped like mount Kailash – all of which have been carved out a single rock. Detached shrines in this excavation from the same rock are to Ganga, Yamuna, Saraswati, each of the ten avatars of Vishnu, the Vedic gods and goddesses such as Indra, Agni, Vayu, Surya and Usha, as well as non-Vedic deities such as Ganesha, Ardhanarishvara (half Shiva, half Parvati), Harihara (half Shiva, half Vishnu), Annapurna, Durga and others. The basement level of the temple reverentially features a range of artwork of Shaivism, Vaishnavism and Shaktism, such as twelve episodes from the childhood of Krishna, an important theme in Vaishnavism.
The structure is a freestanding, multi-storeyed temple complex, covers an area double the size of Parthenon in Athens. It is estimated that the artists carefully removed three million cubic feet of stone to create and shape the Kailasha temple, or about 200,000 tonnes of basaltic rock.
The construction of the temple is often attributed to the Rashtrakuta king Krishna I (r. 756-773 CE), based on certain epigraphs. The temple shows traces of Pallava style. The dimensions of the courtyard are 82 meters x 46 meters at the base, and 30 meters high (280 x 160 x 106 feet). The entrance features a low gopuram. The central shrine housing the lingam features a flat-roofed mandapa supported by 16 pillars, and a Dravidian shikhara. An image of Shiva's mount Nandi (the sacred bull) stands on a porch in front of the temple. The panels on two walls of the main temple consist of rows of carvings, which top to bottom like a text book, present a pictorial summary of the Mahabharata (north side) and the Ramayana (south side).
The Kailasha temple is encyclopedic in its expression and reach, dynamic and among the most admired temple from 1st millennium Indian history. Among the rock-cut carved artworks, states Carmel Berkson, the Kailasha temple is one of the wonders of the world.
Question of the day: Was this carved in 17 years? How was 200,000 tonnes of rock removed in 17 years and where did the debris go?
However, the attribution of the temple to Krishna I is not completely certain because these epigraphs are not physically connected to the caves, and do not date Krishnaraja's reign. Moreover, the land grants issued by Krishna's successors do not contain any references to the Kailsa temple.
Kailasa temple features the use of multiple distinct architectural and sculptural styles. This, combined with its relatively large size, has led some scholars to believe that its construction spanned the reigns of multiple kings. Some of the temple reliefs feature the same style as the one used in the Dashavatara cave, which is located next to the temple. The Dashavatara cave contains an inscription of Krishna's predecessor and nephew Dantidurga (c. 735–756 CE). Based on this, art historian Hermann Goetz (1952) theorized that the construction of the Kailasa temple began during the reign of Dantidurga. Krishna consecrated its first complete version, which was much smaller than the present-day temple. According to Gotez, Dantidurga's role in the temple construction must have been deliberately suppressed, as Krishna sidelined Dantidurga's sons to claim the throne after his death. Based on analysis of the different styles, Goetz further hypothesized that the later Rashtrakuta rulers also extended the temple. These rulers include Dhruva Dharavarsha, Govinda III, Amoghavarsha I, and Krishna III. According to Goetz, the 11th century Paramara ruler Bhoja commissioned the elephant-lion frieze on the lower plinth during his invasion of Deccan, and added a new layer of paintings. Finally, Ahilyabai Holkar commissioned the last layer of paintings in the temple.
M. K. Dhavalikar (1982) analyzed the architecture of the temple, and concluded that the major part of the temple was completed during the reign of Krishna I, although he agreed with Goetz that some other parts of the temple complex can be dated to the later rulers. According to Dhavalikar, the following components were completed by Krishna: the main shrine, its gateway, the nandi-mandapa, the lower-storey, the elephant-lion frieze, the court elephants and the victory pillars. Dhavalikar admits that the most important sculpture of the temple, which depicts Ravana shaking the Kailasa mountain, appears to have been built after the main edifice. This sculpture is considered as one of the finest pieces of Indian art, and it is possible that the temple came to be known as Kailasa after it. Dhavalikar theorizes that this sculpture was carved around 3-4 decades after the completion of the main shrine, on the basis of its similarity to the tandava sculpture in the Lankeshvar cave. H. Goetz dated this relief to the reign of Krishna III. Like Goetz, Dhavalikar attributes some other structures in the temple complex to the later rulers. These include the Lankeshvar cave and the shrine of the river goddesses (possibly constructed during the reign of Govinda III). Dhavalikar further theorizes that the excavation of the Dashavatara cave, which began during the reign of Dantidurga, was completed during the reign of Krishna I. This explains the similarities between the sculptures in the two caves.
The Kailasa Temple is notable for its vertical excavation—carvers started at the top of the original rock and excavated downward. The traditional methods were rigidly followed by the master architect which could not have been achieved by excavating from the front.
A medieval Marathi legend appears to refer to the construction of the Kailasa temple. The earliest extant text to mention this legend is Katha-Kalpataru by Krishna Yajnavalki (c. 1470-1535 CE). According to this legend, the local king suffered from a severe disease. His queen prayed to the god Ghrishneshwar (Shiva) at Elapura to cure her husband. She vowed to construct a temple if her wish was granted, and promised to observe a fast until she could see the shikhara (top) of this temple. After the king was cured, she requested him to build a temple immediately, but multiple architects declared that it would take months to build a temple complete with a shikhara. One architect named Kokasa assured the king that the queen would be able to see the shikhara of a temple within a week's time. He started building the temple from the top, by carving a rock. He was able to finish the shikhara within a week's time, enabling the queen to give up her fast. The temple was named Manikeshwar after the queen. M. K. Dhavalikar theorises that Kokasa was indeed the chief architect of the Kailasa temple, which may have been originally known as Manikeshwar. Multiple 11th-13th century inscriptions from central India mention architects born in the illustrious family of Kokasa.
The Kailasa temple architecture is different from the earlier style prevalent in the Deccan region. As stated above, it appears to be based on the Virupaksha Temple at Pattadakal and the Kailasa temple at Kanchi, but it is not an exact imitation of these two temples. The southern influence on the temple architecture can be attributed to the involvement of Chalukya and Pallava artists in its construction. The indigenous Deccan artisans appear to have played a subordinate role in the temple's construction.
The entrance to the temple courtyard features a low gopuram. Most of the deities at the left of the entrance are Shaivaite (followers of Lord Shiva) while on the right hand side the deities are Vaishnavaites (followers of Lord Vishnu). A two-storeyed gateway opens to reveal a U-shaped courtyard. The dimensions of the courtyard are 82 m x 46 m at the base. The courtyard is edged by a columned arcade three stories high. The arcades are punctuated by huge sculpted panels, and alcoves containing enormous sculptures of a variety of deities. Originally flying bridges of stone connected these galleries to central temple structures, but these have fallen.
Within the courtyard, there is a central shrine dedicated to Shiva, and an image of his mount Nandi (the sacred bull). The central shrine housing the lingam features a flat-roofed mandapa supported by 16 pillars, and a Dravidian shikhara. The shrine – complete with pillars, windows, inner and outer rooms, gathering halls, and an enormous stone lingam at its heart – is carved with niches, plasters, windows as well as images of deities, mithunas (erotic male and female figures) and other figures. As is traditional in Shiva temples, Nandi sits on a porch in front of the central temple. The Nandi mandapa and main Shiva temple are each about 7 metres high, and built on two storeys. The lower stories of the Nandi Mandapa are both solid structures, decorated with elaborate illustrative carvings. The base of the temple has been carved to suggest that elephants are holding the structure aloft. A rock bridge connects the Nandi Mandapa to the porch of the temple. The base of the temple hall features scenes from Mahabharata and Ramayana.
The Kailasa (Sanskrit: Kailāsanātha) temple is one of the largest rock-cut ancient Hindu temples located in Ellora, Maharashtra, India. It was built in the 8th century by the Rashtrakuta king Krishna I as attested in Kannada inscriptions. This is one of the 34 temples and monasteries known collectively as the Ellora Caves. These extend over more than 2 km, were dug side by side in the wall of a high basalt cliff in the complex located at Ellora. The Kailasa (cave 16) is a remarkable example of Dravidian architecture on account of its striking proportion, elaborate workmanship, architectural content, and sculptural ornamentation of rock-cut architecture. The temple was commissioned and completed between 757-783 CE, when Krishna I ruled the Rashtrakuta dynasty. It is designed to recall Mount Kailash, the home of Lord Shiva. It is a megalith carved out of one single rock.
METHOD OF CONSTRUCTION
The Kailasa Temple is notable for its vertical excavation - carvers started at the top of the original rock, and excavated downward. The traditional methods were rigidly followed by the master architect which could not have been achieved by excavating from the front. It is estimated that about 400,000 tons of rocks were scooped out over hundreds of years to construct this monolithic structure. From the chisel marks on walls of this temple, archeologists could conclude that three types of chisels were used to carve this temple.
ARCHITECTURE
All the carvings are at more than one level. A two-storeyed gateway opens to reveal a U-shaped courtyard. The courtyard is edged by a columned arcade three stories high. The arcades are punctuated by huge sculpted panels, and alcoves containing enormous sculptures of a variety of deities. Originally flying bridges of stone connected these galleries to central temple structures, but these have fallen.
Within the courtyard are two structures. As is traditional in Shiva temples, an image of the sacred bull Nandi fronts the central temple housing the lingam. In Cave 16, the Nandi Mandapa and main Shiva temple are each about 7 metres high, and built on two storeys. The lower stories of the Nandi Mandapa are both solid structures, decorated with elaborate illustrative carvings. The base of the temple has been carved to suggest that elephants are holding the structure aloft.
A rock bridge connects the Nandi Mandapa to the porch of the temple. The structure itself is a tall pyramidic South Indian temple. The shrine – complete with pillars, windows, inner and outer rooms, gathering halls, and an enormous stone lingam at its heart – is carved with niches, plasters, windows as well as images of deities, mithunas (erotic male and female figures) and other figures. Most of the deities at the left of the entrance are Shaivaite (followers of Lord Shiva) while on the right hand side the deities are Vaishnavaites (followers of Lord Vishnu).
There are two Dhwajasthambha (pillars with flagstaff) in the courtyard. The grand sculpture of Ravana attempting to lift Mount Kailasa, with his full might is a landmark in Indian art.
WIKIPEDIA
The Kailasa (Sanskrit: Kailāsanātha) temple is one of the largest rock-cut ancient Hindu temples located in Ellora, Maharashtra, India. It was built in the 8th century by the Rashtrakuta king Krishna I as attested in Kannada inscriptions. This is one of the 34 temples and monasteries known collectively as the Ellora Caves. These extend over more than 2 km, were dug side by side in the wall of a high basalt cliff in the complex located at Ellora. The Kailasa (cave 16) is a remarkable example of Dravidian architecture on account of its striking proportion, elaborate workmanship, architectural content, and sculptural ornamentation of rock-cut architecture. The temple was commissioned and completed between 757-783 CE, when Krishna I ruled the Rashtrakuta dynasty. It is designed to recall Mount Kailash, the home of Lord Shiva. It is a megalith carved out of one single rock.
METHOD OF CONSTRUCTION
The Kailasa Temple is notable for its vertical excavation - carvers started at the top of the original rock, and excavated downward. The traditional methods were rigidly followed by the master architect which could not have been achieved by excavating from the front. It is estimated that about 400,000 tons of rocks were scooped out over hundreds of years to construct this monolithic structure. From the chisel marks on walls of this temple, archeologists could conclude that three types of chisels were used to carve this temple.
ARCHITECTURE
All the carvings are at more than one level. A two-storeyed gateway opens to reveal a U-shaped courtyard. The courtyard is edged by a columned arcade three stories high. The arcades are punctuated by huge sculpted panels, and alcoves containing enormous sculptures of a variety of deities. Originally flying bridges of stone connected these galleries to central temple structures, but these have fallen.
Within the courtyard are two structures. As is traditional in Shiva temples, an image of the sacred bull Nandi fronts the central temple housing the lingam. In Cave 16, the Nandi Mandapa and main Shiva temple are each about 7 metres high, and built on two storeys. The lower stories of the Nandi Mandapa are both solid structures, decorated with elaborate illustrative carvings. The base of the temple has been carved to suggest that elephants are holding the structure aloft.
A rock bridge connects the Nandi Mandapa to the porch of the temple. The structure itself is a tall pyramidic South Indian temple. The shrine – complete with pillars, windows, inner and outer rooms, gathering halls, and an enormous stone lingam at its heart – is carved with niches, plasters, windows as well as images of deities, mithunas (erotic male and female figures) and other figures. Most of the deities at the left of the entrance are Shaivaite (followers of Lord Shiva) while on the right hand side the deities are Vaishnavaites (followers of Lord Vishnu).
There are two Dhwajasthambha (pillars with flagstaff) in the courtyard. The grand sculpture of Ravana attempting to lift Mount Kailasa, with his full might is a landmark in Indian art.
WIKIPEDIA
The Kailasa (Sanskrit: Kailāsanātha) temple is one of the largest rock-cut ancient Hindu temples located in Ellora, Maharashtra, India. It was built in the 8th century by the Rashtrakuta king Krishna I as attested in Kannada inscriptions. This is one of the 34 temples and monasteries known collectively as the Ellora Caves. These extend over more than 2 km, were dug side by side in the wall of a high basalt cliff in the complex located at Ellora. The Kailasa (cave 16) is a remarkable example of Dravidian architecture on account of its striking proportion, elaborate workmanship, architectural content, and sculptural ornamentation of rock-cut architecture. The temple was commissioned and completed between 757-783 CE, when Krishna I ruled the Rashtrakuta dynasty. It is designed to recall Mount Kailash, the home of Lord Shiva. It is a megalith carved out of one single rock.
METHOD OF CONSTRUCTION
The Kailasa Temple is notable for its vertical excavation - carvers started at the top of the original rock, and excavated downward. The traditional methods were rigidly followed by the master architect which could not have been achieved by excavating from the front. It is estimated that about 400,000 tons of rocks were scooped out over hundreds of years to construct this monolithic structure. From the chisel marks on walls of this temple, archeologists could conclude that three types of chisels were used to carve this temple.
ARCHITECTURE
All the carvings are at more than one level. A two-storeyed gateway opens to reveal a U-shaped courtyard. The courtyard is edged by a columned arcade three stories high. The arcades are punctuated by huge sculpted panels, and alcoves containing enormous sculptures of a variety of deities. Originally flying bridges of stone connected these galleries to central temple structures, but these have fallen.
Within the courtyard are two structures. As is traditional in Shiva temples, an image of the sacred bull Nandi fronts the central temple housing the lingam. In Cave 16, the Nandi Mandapa and main Shiva temple are each about 7 metres high, and built on two storeys. The lower stories of the Nandi Mandapa are both solid structures, decorated with elaborate illustrative carvings. The base of the temple has been carved to suggest that elephants are holding the structure aloft.
A rock bridge connects the Nandi Mandapa to the porch of the temple. The structure itself is a tall pyramidic South Indian temple. The shrine – complete with pillars, windows, inner and outer rooms, gathering halls, and an enormous stone lingam at its heart – is carved with niches, plasters, windows as well as images of deities, mithunas (erotic male and female figures) and other figures. Most of the deities at the left of the entrance are Shaivaite (followers of Lord Shiva) while on the right hand side the deities are Vaishnavaites (followers of Lord Vishnu).
There are two Dhwajasthambha (pillars with flagstaff) in the courtyard. The grand sculpture of Ravana attempting to lift Mount Kailasa, with his full might is a landmark in Indian art.
WIKIPEDIA
The Kailasa (Sanskrit: Kailāsanātha) temple is one of the largest rock-cut ancient Hindu temples located in Ellora, Maharashtra, India. It was built in the 8th century by the Rashtrakuta king Krishna I as attested in Kannada inscriptions. This is one of the 34 temples and monasteries known collectively as the Ellora Caves. These extend over more than 2 km, were dug side by side in the wall of a high basalt cliff in the complex located at Ellora. The Kailasa (cave 16) is a remarkable example of Dravidian architecture on account of its striking proportion, elaborate workmanship, architectural content, and sculptural ornamentation of rock-cut architecture. The temple was commissioned and completed between 757-783 CE, when Krishna I ruled the Rashtrakuta dynasty. It is designed to recall Mount Kailash, the home of Lord Shiva. It is a megalith carved out of one single rock.
METHOD OF CONSTRUCTION
The Kailasa Temple is notable for its vertical excavation - carvers started at the top of the original rock, and excavated downward. The traditional methods were rigidly followed by the master architect which could not have been achieved by excavating from the front. It is estimated that about 400,000 tons of rocks were scooped out over hundreds of years to construct this monolithic structure. From the chisel marks on walls of this temple, archeologists could conclude that three types of chisels were used to carve this temple.
ARCHITECTURE
All the carvings are at more than one level. A two-storeyed gateway opens to reveal a U-shaped courtyard. The courtyard is edged by a columned arcade three stories high. The arcades are punctuated by huge sculpted panels, and alcoves containing enormous sculptures of a variety of deities. Originally flying bridges of stone connected these galleries to central temple structures, but these have fallen.
Within the courtyard are two structures. As is traditional in Shiva temples, an image of the sacred bull Nandi fronts the central temple housing the lingam. In Cave 16, the Nandi Mandapa and main Shiva temple are each about 7 metres high, and built on two storeys. The lower stories of the Nandi Mandapa are both solid structures, decorated with elaborate illustrative carvings. The base of the temple has been carved to suggest that elephants are holding the structure aloft.
A rock bridge connects the Nandi Mandapa to the porch of the temple. The structure itself is a tall pyramidic South Indian temple. The shrine – complete with pillars, windows, inner and outer rooms, gathering halls, and an enormous stone lingam at its heart – is carved with niches, plasters, windows as well as images of deities, mithunas (erotic male and female figures) and other figures. Most of the deities at the left of the entrance are Shaivaite (followers of Lord Shiva) while on the right hand side the deities are Vaishnavaites (followers of Lord Vishnu).
There are two Dhwajasthambha (pillars with flagstaff) in the courtyard. The grand sculpture of Ravana attempting to lift Mount Kailasa, with his full might is a landmark in Indian art.
WIKIPEDIA
. . . it took ten generations to cut this temple out of a single rock! To understand my pictures please read the explanation below:
______
The Kailasa (Sanskrit: Kailāsanātha) temple is one of the largest rock-cut ancient Hindu temples located in Ellora, Maharashtra, India. It was built in the 8th century by the Rashtrakuta king Krishna I as attested in Kannada inscriptions. This is one of the 34 temples and monasteries known collectively as the Ellora Caves. These extend over more than 2 km, were dug side by side in the wall of a high basalt cliff in the complex located at Ellora. The Kailasa (cave 16) is a remarkable example of Dravidian architecture on account of its striking proportion, elaborate workmanship, architectural content, and sculptural ornamentation of rock-cut architecture. The temple was commissioned and completed between 757-783 CE, when Krishna I ruled the Rashtrakuta dynasty. It is designed to recall Mount Kailash, the home of Lord Shiva. It is a megalith carved out of one single rock.
METHOD OF CONSTRUCTION
The Kailasa Temple is notable for its vertical excavation - carvers started at the top of the original rock, and excavated downward. The traditional methods were rigidly followed by the master architect which could not have been achieved by excavating from the front. It is estimated that about 400,000 tons of rocks were scooped out over hundreds of years to construct this monolithic structure. From the chisel marks on walls of this temple, archeologists could conclude that three types of chisels were used to carve this temple.
ARCHITECTURE
All the carvings are at more than one level. A two-storeyed gateway opens to reveal a U-shaped courtyard. The courtyard is edged by a columned arcade three stories high. The arcades are punctuated by huge sculpted panels, and alcoves containing enormous sculptures of a variety of deities. Originally flying bridges of stone connected these galleries to central temple structures, but these have fallen.
Within the courtyard are two structures. As is traditional in Shiva temples, an image of the sacred bull Nandi fronts the central temple housing the lingam. In Cave 16, the Nandi Mandapa and main Shiva temple are each about 7 metres high, and built on two storeys. The lower stories of the Nandi Mandapa are both solid structures, decorated with elaborate illustrative carvings. The base of the temple has been carved to suggest that elephants are holding the structure aloft.
A rock bridge connects the Nandi Mandapa to the porch of the temple. The structure itself is a tall pyramidic South Indian temple. The shrine – complete with pillars, windows, inner and outer rooms, gathering halls, and an enormous stone lingam at its heart – is carved with niches, plasters, windows as well as images of deities, mithunas (erotic male and female figures) and other figures. Most of the deities at the left of the entrance are Shaivaite (followers of Lord Shiva) while on the right hand side the deities are Vaishnavaites (followers of Lord Vishnu).
There are two Dhwajasthambha (pillars with flagstaff) in the courtyard. The grand sculpture of Ravana attempting to lift Mount Kailasa, with his full might is a landmark in Indian art.
WIKIPEDIA
INNER PARIKRAMA 2010 Photo Made By Kailash Mansarovar Foundation , Swami Bikash Giri , www.sumeruparvat.com , www.naturalitem.com
Mount Kailash (also Mount kailas; Tibetan: གངས་རིན་པོ་ཆེKangrinboqê or Gang Rinpoche; simplified Chinese: 冈仁波齐峰,Gāngrénbōqí fēng, Sanskrit: कैलास Kailāsa) is a peak in the Kailas Range (Gangdisê Mountains), which forms part of the Transhimalaya in Tibet. It lies near the source of some of the longest rivers in Asia: the Indus River, the Sutlej River (a major tributary of the Indus River), the Brahmaputra River, and the Karnali River (a tributary of the River Ganga). It is considered a sacred place in four religions: Bön, Buddhism, Hinduism andJainism. The mountain lies near Lake Manasarovar and Lake Rakshastalin Tibet.
According to Hinduism, Lord Shiva, the destroyer of ignorance and illusion, resides at the summit of a legendary mountain named Kailās, where he sits in a state of perpetual meditation along with his wife Pārvatī.
According to Charles Allen, one description in the Vishnu Purana of the mountain states that its four faces are made of crystal, ruby, gold, and lapis lazuli.[7] It is a pillar of the world and is located at the heart of six mountain ranges symbolizing a lotus.[7]
Every year, thousands make a pilgrimage to Kailash, following a tradition going back thousands of years. Pilgrims of several religions believe that circumambulating Mount Kailash on foot is a holy ritual that will bring good fortune. The peregrination is made in a clockwise direction by Hindus and Buddhists. Followers of the Jain andBönpo religions circumambulate the mountain in a counterclockwise direction. The path around Mount Kailash is 52 km (32 mi) long.
Some pilgrims believe that the entire walk around Kailash should be made in a single day, which is not considered an easy task. A person in good shape walking fast would take perhaps 15 hours to complete the 52 km trek. Some of the devout do accomplish this feat, little daunted by the uneven terrain, altitude sickness and harsh conditions faced in the process. Indeed, other pilgrims venture a much more demanding regimen, performing body-lengthprostrations over the entire length of the circumambulation: The pilgrim bends down, kneels, prostrates full-length, makes a mark with his fingers, rises to his knees, prays, and then crawls forward on hands and knees to the mark made by his/her fingers before repeating the process. It requires at least four weeks of physical endurance to perform the circumambulation while following this regimen. The mountain is located in a particularly remote and inhospitable area of the Tibetan Himalayas. A few modern amenities, such as benches, resting places and refreshment kiosks, exist to aid the pilgrims in their devotions. According to all religions that revere the mountain, setting foot on its slopes is a dire sin. It is claimed that many people who ventured to defy the taboo have died in the process[citation needed]. It is a popular belief that the stairways on Mount Kailash lead to heaven.
Following the political and border disturbances across the Chinese-Indian boundary, pilgrimage to the legendary abode of Lord Shiva was stopped from 1954 to 1978. Thereafter, a limited number of Indian pilgrims have been allowed to visit the place, under the supervision of the Chinese and Indian governments either by a lengthy and hazardous trek over the Himalayan terrain, travel by land from Kathmandu or from Lhasa where flights from Kathmandu are available to Lhasa and thereafter travel over the great Tibetan plateau by car. The journey takes four night stops, finally arriving at Darchen at elevation of 4,600 m (15,100 ft), small outpost that swells with pilgrims at certain times of year. Despite its minimal infrastructure, modest guest houses are available for foreign pilgrims, whereas Tibetan pilgrims generally sleep in their own tents. A small regional medical center serving far-western Tibet and funded by the Swiss Ngari Korsum Foundation was built here in 1997.
Walking around the holy mountain—a part of its official park—has to be done on foot, pony or yak, taking some three days of trekking starting from a height of around 15,000 ft (4,600 m) past the Tarboche (flagpole) to cross the Drölma pass 18,200 ft (5,500 m), and encamping for two nights en route. First, near the meadow of Dirapuk gompa, some 2 to 3 km (1.2 to 1.9 mi) before the pass and second, after crossing the pass and going downhill as far as possible (viewing Gauri Kund in the distance).
NAIMISHARANYA
Naimisaranyam, also known as Neemsar, Nimsar or Nimkhar is a Hindu temple dedicated to Vishnu located in the north Indian state of Uttar Pradesh.[1] It is one of the Divya Desams, the 108 temples of Vishnu revered in Nalayira Divya Prabandham by the 12 poet saints, or Alwars. The temple is believed to be of significant antiquity with contributions at different times from the ruling kings. The temple is counted as one of the eight temples of Vishnu that self-manifested and is classified as Swayamvyaktha Kshetra. The temple is open till 6pm. The holy tank Chankra Kunda is associated with the temple and it is a pilgrimage centre where people take a holy dip during festive occasions
Sage Narada is believed to have searched for the best theertha (water body) in three worlds. He went to Kailasa, the abode of Shiva, then to Parkadal, the abode of Vishnu and finally landed in the water body in the Naimisha Forest. The central deity is also believed to be worshipped by sudharma and devas(celestical deities).[1][2]
Indra, the king of the devas, was once driven out of devaloka by an asuranamed Vritra. The asura was the recipient of a boon whereby he could not be killed by any weapon that was known till the date of his receiving the boon and additionally that no weapon made of wood or metal could harm him. Indra, who lost all hope of recovering his kingdom went to seek the aid of Vishnu. Vishnu revealed to Indra that only the weapon made from the bones of the sageDadhichi would defeat Vritra. Indra and the other devas therefore approached the sage, whom Indra had once beheaded, and asked him for his aid in defeating Vritra. Dadhichi acceded to the devas' request but said that he wished that he had time to go on a pilgrimage to all the holy rivers before he gave up his life for them. Indra then brought together all the waters of the holy rivers to Naimisaranya, thereby allowing the sage to have his wish fulfilled without a further loss of time. Dadhichi is then said to have given up his life by the art of yoga after which the devas fashioned the Vajrayudha from his spine. This weapon was then used to defeat the asura, allowing Indra to reclaim his place as the king of devaloka.[3]
As told in another legend, when sages were planning to perform penance, Brahma, the god of creation, brought out a ring from darba grass. He asked the sages to perform penance at the place where the ring fell, which is believed to be Naimisaranya. The sages performed penance and at the end of it, Vishnu appeared to the sages and accepted their offerings. It is believed that the forest still has Vishnu and all sages as trees
Naimisaranyam is located at the junction of the roads from Sitapur and Khairabad, 32 km from Sitapur and 42 km from the Sandila railway station, 45 miles north of Lucknow in Uttar Pradesh. Naimisaranya is also known as Nimsar or Nimkhar and is located on the left bank of the river Gomati.[5] The sacred well, namely Chakra Kunda is believed to have started from the weapon of Vishnu, Chakra. There are shrines dedicated to Chakranarayana, Ganesh, Rama, Lakshman
This place has also been visited by Sankaracharya[8] and the famous poet, Surdas resided here. Suthar, the author of 18 puranas is believed to have lived here and presented his sayings to the sages. The central deity is believed to have presided over the forest and hence the puja (rituals) are done to the forest.[2]
The temple is counted as one of the eight temples of Vishnu that self-manifested and is classified as Swayamvyaktha Kshetra.[9] (Seven other temples in the line are Srirangam Ranganathaswamy temple, Bhu Varaha Swamy temple, Tirumala Venkateswara Temple, and Vanamamalai Perumal Temple in South India and Saligrama, Pushkar and Badrinath Temple in North India).[10] Naimisaranya temple is revered in Nalayira Divya Prabandham, the 7th–9th century Vaishnava canon, by Thirumangai Azhwar in ten hymns. The temple is classified as a divyadesam, the 108 Vishnu temples that are revered in the Vaishnava canon.
Every new moon day, a large number of people purify themselves with a dip in the holy well. If the new moon falls on a Monday, it is believed that a holy bath in the well and offering to the presiding deity Lalitha will wash away all the sins committed in their lifetime
By Kailash Mansarovar Foundation Swami Bikash Giri www.sumeruparvat.com , www.naturalitem.com
Vue du temple dit du Kailasa d'Ellora
Inde, Maharashtra
Oeuvre de Yoshida Hiroshi (1876-1950)
Cette oeuvre vient compléter la collection des oeuvres de cet artiste japonais voyageur, conservées par le musée Guimet (MNAAG) et qu'on peut voir sur le site de l'agence photo de la RMN, cette estampe n'y figure pas encore.
1931
Japon
Estampe polychrome
Don de la SAMG en 2022
Musée national des arts asiatiques - Guimet, Paris
www.photo.rmn.fr/CS.aspx?VP3=SearchResult&VBID=2CMFCI...
Oeuvre donnée au musée par la SAMG et présentée dans l'exposition "Les Amis de Guimet : un siècle pour le musée", musée national des arts asiatiques - Guimet, Paris
La Société des Amis du musée Guimet (SAMG), fondée en 1923, célèbre ses 100 ans. Deux événements inédits célèbrent ce centenaire : la publication d’un ouvrage retraçant pour la première fois son histoire, ainsi qu’une exposition-anniversaire centrée sur les acquisitions très diverses venues enrichir les collections nationales grâce à l’aide financière et aux dons généreux de la SAMG.... Extrait du site de l'exposition :
"Les Amis de Guimet : un siècle pour le musée", musée national des arts asiatiques - Guimet, Paris
www.guimet.fr/event/les-amis-de-guimet-un-siecle-pour-le-...
The Kailasa (Sanskrit: Kailāsanātha) temple is one of the largest rock-cut ancient Hindu temples located in Ellora, Maharashtra, India. It was built in the 8th century by the Rashtrakuta king Krishna I as attested in Kannada inscriptions. This is one of the 34 temples and monasteries known collectively as the Ellora Caves. These extend over more than 2 km, were dug side by side in the wall of a high basalt cliff in the complex located at Ellora. The Kailasa (cave 16) is a remarkable example of Dravidian architecture on account of its striking proportion, elaborate workmanship, architectural content, and sculptural ornamentation of rock-cut architecture. The temple was commissioned and completed between 757-783 CE, when Krishna I ruled the Rashtrakuta dynasty. It is designed to recall Mount Kailash, the home of Lord Shiva. It is a megalith carved out of one single rock.
METHOD OF CONSTRUCTION
The Kailasa Temple is notable for its vertical excavation - carvers started at the top of the original rock, and excavated downward. The traditional methods were rigidly followed by the master architect which could not have been achieved by excavating from the front. It is estimated that about 400,000 tons of rocks were scooped out over hundreds of years to construct this monolithic structure. From the chisel marks on walls of this temple, archeologists could conclude that three types of chisels were used to carve this temple.
ARCHITECTURE
All the carvings are at more than one level. A two-storeyed gateway opens to reveal a U-shaped courtyard. The courtyard is edged by a columned arcade three stories high. The arcades are punctuated by huge sculpted panels, and alcoves containing enormous sculptures of a variety of deities. Originally flying bridges of stone connected these galleries to central temple structures, but these have fallen.
Within the courtyard are two structures. As is traditional in Shiva temples, an image of the sacred bull Nandi fronts the central temple housing the lingam. In Cave 16, the Nandi Mandapa and main Shiva temple are each about 7 metres high, and built on two storeys. The lower stories of the Nandi Mandapa are both solid structures, decorated with elaborate illustrative carvings. The base of the temple has been carved to suggest that elephants are holding the structure aloft.
A rock bridge connects the Nandi Mandapa to the porch of the temple. The structure itself is a tall pyramidic South Indian temple. The shrine – complete with pillars, windows, inner and outer rooms, gathering halls, and an enormous stone lingam at its heart – is carved with niches, plasters, windows as well as images of deities, mithunas (erotic male and female figures) and other figures. Most of the deities at the left of the entrance are Shaivaite (followers of Lord Shiva) while on the right hand side the deities are Vaishnavaites (followers of Lord Vishnu).
There are two Dhwajasthambha (pillars with flagstaff) in the courtyard. The grand sculpture of Ravana attempting to lift Mount Kailasa, with his full might is a landmark in Indian art.
WIKIPEDIA
The Kailasa (Sanskrit: Kailāsanātha) temple is one of the largest rock-cut ancient Hindu temples located in Ellora, Maharashtra, India. It was built in the 8th century by the Rashtrakuta king Krishna I as attested in Kannada inscriptions. This is one of the 34 temples and monasteries known collectively as the Ellora Caves. These extend over more than 2 km, were dug side by side in the wall of a high basalt cliff in the complex located at Ellora. The Kailasa (cave 16) is a remarkable example of Dravidian architecture on account of its striking proportion, elaborate workmanship, architectural content, and sculptural ornamentation of rock-cut architecture. The temple was commissioned and completed between 757-783 CE, when Krishna I ruled the Rashtrakuta dynasty. It is designed to recall Mount Kailash, the home of Lord Shiva. It is a megalith carved out of one single rock.
METHOD OF CONSTRUCTION
The Kailasa Temple is notable for its vertical excavation - carvers started at the top of the original rock, and excavated downward. The traditional methods were rigidly followed by the master architect which could not have been achieved by excavating from the front. It is estimated that about 400,000 tons of rocks were scooped out over hundreds of years to construct this monolithic structure. From the chisel marks on walls of this temple, archeologists could conclude that three types of chisels were used to carve this temple.
ARCHITECTURE
All the carvings are at more than one level. A two-storeyed gateway opens to reveal a U-shaped courtyard. The courtyard is edged by a columned arcade three stories high. The arcades are punctuated by huge sculpted panels, and alcoves containing enormous sculptures of a variety of deities. Originally flying bridges of stone connected these galleries to central temple structures, but these have fallen.
Within the courtyard are two structures. As is traditional in Shiva temples, an image of the sacred bull Nandi fronts the central temple housing the lingam. In Cave 16, the Nandi Mandapa and main Shiva temple are each about 7 metres high, and built on two storeys. The lower stories of the Nandi Mandapa are both solid structures, decorated with elaborate illustrative carvings. The base of the temple has been carved to suggest that elephants are holding the structure aloft.
A rock bridge connects the Nandi Mandapa to the porch of the temple. The structure itself is a tall pyramidic South Indian temple. The shrine – complete with pillars, windows, inner and outer rooms, gathering halls, and an enormous stone lingam at its heart – is carved with niches, plasters, windows as well as images of deities, mithunas (erotic male and female figures) and other figures. Most of the deities at the left of the entrance are Shaivaite (followers of Lord Shiva) while on the right hand side the deities are Vaishnavaites (followers of Lord Vishnu).
There are two Dhwajasthambha (pillars with flagstaff) in the courtyard. The grand sculpture of Ravana attempting to lift Mount Kailasa, with his full might is a landmark in Indian art.
WIKIPEDIA