View allAll Photos Tagged FileMaker
added the metadata controller and metadata replica and a new filemaker server.
Making plans to remove the other servers and set up another RAID and create another SAN.... with a XtraByte 16G LTO over fibre.
The Black Country Living Museum (formerly The Black Country Museum) is an open-air museum of rebuilt historic buildings in Dudley in the West Midlands of England. It is located in the centre of the Black Country, 10 miles west of Birmingham. The museum occupies 105,000 square metres (26 acres) of former industrial land partly reclaimed from a former railway goods yard, disused lime kilns, canal arm and former coal pits.
The museum opened to the public in 1978, and has since added over 50 shops, houses and other industrial buildings from around the Metropolitan Boroughs of Dudley, Sandwell and Walsall and the City of Wolverhampton (collectively known as the Black Country); mainly in a specially built village. Most buildings were relocated from their original sites to form a base from where demonstrators portray life spanning 300 years of history, with a focus on 1850-1950.
The museum is constantly improving as new exhibits, especially buildings, are being added.
The museum is close to the site where Dud Dudley first mastered the technique of smelting iron with coal instead of wood charcoal and making iron enough for industrial use. Having a claim to be "the birthplace of the Industrial Revolution", the Black Country is famous for its wide range of midsteel-based products from nails to the anchor and anchor chain for the Titanic.
The site's coal mining heritage is shown by an underground drift and colliery surface buildings. The museum has a working replica of a Newcomen atmospheric engine which was first successfully put to use in Tipton in 1712. The museum's reconstruction was based on a print engraved by Thomas Barney, filemaker of Wolverhampton, in 1719.
Electric trams and trolleybuses transport visitors from the entrance to the village where thirty domestic and industrial buildings have been relocated close to the canal basin. The museum is one of three in the UK with working trolleybuses. The route to the village passes the Cast Iron Houses and a 1930s fairground. A narrowboat operated by Dudley Canal Trust makes trips on the Dudley Canal and into the Dudley Tunnel
On 16 February 2012, the museum's collection was awarded designated status by Arts Council England (ACE), a mark of distinction celebrating its unique national and international importance.
The museum is run by the Black Country Living Museum Trust, a registered charity under English law.
Black Country living Museum Dudley
The Black Country Living Museum (formerly the Black Country Museum) is an open-air museum of rebuilt historic buildings in Dudley, West Midlands, England.[1] It is located in the centre of the Black Country, 10 miles west of Birmingham. The museum occupies 105,000 square metres (26 acres) of former industrial land partly reclaimed from a former railway goods yard, disused lime kilns, canal arm and former coal pits.
The museum opened to the public in 1978, and has since added over 50 shops, houses and other industrial buildings from around the Metropolitan Boroughs of Dudley, Sandwell and Walsall and the City of Wolverhampton (collectively known as the Black Country); mainly in a specially built village. Most buildings were relocated from their original sites to form a base from where demonstrators portray life spanning 300 years of history, with a focus on 1850–1950.
The museum continues to evolve, as further buildings and other exhibits are added.
Background
View towards the back-to-back (Brook Street) houses at the museum
The museum is close to the site where Dud Dudley first mastered the technique of smelting iron with coal instead of wood charcoal and making iron in large enough quantities for industrial use. Having a claim to be "the birthplace of the Industrial Revolution", the Black Country is famous for its wide range of midsteel-based products from nails to the anchor and anchor chain for the Titanic.
The site's coal mining heritage is shown by an underground drift and colliery surface buildings. The museum has a working replica of a Newcomen atmospheric engine. Thomas Newcomen's invention was first successfully put to use in Tipton in 1712.[2] The museum's reconstruction was based on a print engraved by Thomas Barney, filemaker of Wolverhampton, in 1719.[3]
Electric trams and trolleybuses transport visitors from the entrance to the village where thirty domestic and industrial buildings have been relocated close to the canal basin. The museum is one of three in the UK with working trolleybuses. The route to the village passes the Cast Iron Houses and a 1930s fairground. A narrowboat operated by Dudley Canal Trust makes trips on the Dudley Canal and into the Dudley Tunnel.
On 16 February 2012, the museum's collection was awarded designated status by Arts Council England (ACE),[4] a mark of distinction celebrating its unique national and international importance.[5]
The museum is run by the Black Country Living Museum Trust, a registered charity under English law.[6]
E
The Black Country Living Museum (formerly The Black Country Museum) is an open-air museum of rebuilt historic buildings in Dudley in the West Midlands of England. It is located in the centre of the Black Country, 10 miles west of Birmingham. The museum occupies 105,000 square metres (26 acres) of former industrial land partly reclaimed from a former railway goods yard, disused lime kilns, canal arm and former coal pits.
The museum opened to the public in 1978, and has since added over 50 shops, houses and other industrial buildings from around the Metropolitan Boroughs of Dudley, Sandwell and Walsall and the City of Wolverhampton (collectively known as the Black Country); mainly in a specially built village. Most buildings were relocated from their original sites to form a base from where demonstrators portray life spanning 300 years of history, with a focus on 1850-1950.
The museum is constantly improving as new exhibits, especially buildings, are being added.
The museum is close to the site where Dud Dudley first mastered the technique of smelting iron with coal instead of wood charcoal and making iron enough for industrial use. Having a claim to be "the birthplace of the Industrial Revolution", the Black Country is famous for its wide range of midsteel-based products from nails to the anchor and anchor chain for the Titanic.
The site's coal mining heritage is shown by an underground drift and colliery surface buildings. The museum has a working replica of a Newcomen atmospheric engine which was first successfully put to use in Tipton in 1712. The museum's reconstruction was based on a print engraved by Thomas Barney, filemaker of Wolverhampton, in 1719.
Electric trams and trolleybuses transport visitors from the entrance to the village where thirty domestic and industrial buildings have been relocated close to the canal basin. The museum is one of three in the UK with working trolleybuses. The route to the village passes the Cast Iron Houses and a 1930s fairground. A narrowboat operated by Dudley Canal Trust makes trips on the Dudley Canal and into the Dudley Tunnel
On 16 February 2012, the museum's collection was awarded designated status by Arts Council England (ACE), a mark of distinction celebrating its unique national and international importance.
The museum is run by the Black Country Living Museum Trust, a registered charity under English law.
The Black Country Living Museum (formerly The Black Country Museum) is an open-air museum of rebuilt historic buildings in Dudley in the West Midlands of England. It is located in the centre of the Black Country, 10 miles west of Birmingham. The museum occupies 105,000 square metres (26 acres) of former industrial land partly reclaimed from a former railway goods yard, disused lime kilns, canal arm and former coal pits.
The museum opened to the public in 1978, and has since added over 50 shops, houses and other industrial buildings from around the Metropolitan Boroughs of Dudley, Sandwell and Walsall and the City of Wolverhampton (collectively known as the Black Country); mainly in a specially built village. Most buildings were relocated from their original sites to form a base from where demonstrators portray life spanning 300 years of history, with a focus on 1850-1950.
The museum is constantly improving as new exhibits, especially buildings, are being added.
The museum is close to the site where Dud Dudley first mastered the technique of smelting iron with coal instead of wood charcoal and making iron enough for industrial use. Having a claim to be "the birthplace of the Industrial Revolution", the Black Country is famous for its wide range of midsteel-based products from nails to the anchor and anchor chain for the Titanic.
The site's coal mining heritage is shown by an underground drift and colliery surface buildings. The museum has a working replica of a Newcomen atmospheric engine which was first successfully put to use in Tipton in 1712. The museum's reconstruction was based on a print engraved by Thomas Barney, filemaker of Wolverhampton, in 1719.
Electric trams and trolleybuses transport visitors from the entrance to the village where thirty domestic and industrial buildings have been relocated close to the canal basin. The museum is one of three in the UK with working trolleybuses. The route to the village passes the Cast Iron Houses and a 1930s fairground. A narrowboat operated by Dudley Canal Trust makes trips on the Dudley Canal and into the Dudley Tunnel
On 16 February 2012, the museum's collection was awarded designated status by Arts Council England (ACE), a mark of distinction celebrating its unique national and international importance.
The museum is run by the Black Country Living Museum Trust, a registered charity under English law.
The Black Country Living Museum (formerly The Black Country Museum) is an open-air museum of rebuilt historic buildings in Dudley in the West Midlands of England. It is located in the centre of the Black Country, 10 miles west of Birmingham. The museum occupies 105,000 square metres (26 acres) of former industrial land partly reclaimed from a former railway goods yard, disused lime kilns, canal arm and former coal pits.
The museum opened to the public in 1978, and has since added over 50 shops, houses and other industrial buildings from around the Metropolitan Boroughs of Dudley, Sandwell and Walsall and the City of Wolverhampton (collectively known as the Black Country); mainly in a specially built village. Most buildings were relocated from their original sites to form a base from where demonstrators portray life spanning 300 years of history, with a focus on 1850-1950.
The museum is constantly improving as new exhibits, especially buildings, are being added.
The museum is close to the site where Dud Dudley first mastered the technique of smelting iron with coal instead of wood charcoal and making iron enough for industrial use. Having a claim to be "the birthplace of the Industrial Revolution", the Black Country is famous for its wide range of midsteel-based products from nails to the anchor and anchor chain for the Titanic.
The site's coal mining heritage is shown by an underground drift and colliery surface buildings. The museum has a working replica of a Newcomen atmospheric engine which was first successfully put to use in Tipton in 1712. The museum's reconstruction was based on a print engraved by Thomas Barney, filemaker of Wolverhampton, in 1719.
Electric trams and trolleybuses transport visitors from the entrance to the village where thirty domestic and industrial buildings have been relocated close to the canal basin. The museum is one of three in the UK with working trolleybuses. The route to the village passes the Cast Iron Houses and a 1930s fairground. A narrowboat operated by Dudley Canal Trust makes trips on the Dudley Canal and into the Dudley Tunnel
On 16 February 2012, the museum's collection was awarded designated status by Arts Council England (ACE), a mark of distinction celebrating its unique national and international importance.
The museum is run by the Black Country Living Museum Trust, a registered charity under English law.
The Black Country Living Museum (formerly The Black Country Museum) is an open-air museum of rebuilt historic buildings in Dudley in the West Midlands of England. It is located in the centre of the Black Country, 10 miles west of Birmingham. The museum occupies 105,000 square metres (26 acres) of former industrial land partly reclaimed from a former railway goods yard, disused lime kilns, canal arm and former coal pits.
The museum opened to the public in 1978, and has since added over 50 shops, houses and other industrial buildings from around the Metropolitan Boroughs of Dudley, Sandwell and Walsall and the City of Wolverhampton (collectively known as the Black Country); mainly in a specially built village. Most buildings were relocated from their original sites to form a base from where demonstrators portray life spanning 300 years of history, with a focus on 1850-1950.
The museum is constantly improving as new exhibits, especially buildings, are being added.
The museum is close to the site where Dud Dudley first mastered the technique of smelting iron with coal instead of wood charcoal and making iron enough for industrial use. Having a claim to be "the birthplace of the Industrial Revolution", the Black Country is famous for its wide range of midsteel-based products from nails to the anchor and anchor chain for the Titanic.
The site's coal mining heritage is shown by an underground drift and colliery surface buildings. The museum has a working replica of a Newcomen atmospheric engine which was first successfully put to use in Tipton in 1712. The museum's reconstruction was based on a print engraved by Thomas Barney, filemaker of Wolverhampton, in 1719.
Electric trams and trolleybuses transport visitors from the entrance to the village where thirty domestic and industrial buildings have been relocated close to the canal basin. The museum is one of three in the UK with working trolleybuses. The route to the village passes the Cast Iron Houses and a 1930s fairground. A narrowboat operated by Dudley Canal Trust makes trips on the Dudley Canal and into the Dudley Tunnel
On 16 February 2012, the museum's collection was awarded designated status by Arts Council England (ACE), a mark of distinction celebrating its unique national and international importance.
The museum is run by the Black Country Living Museum Trust, a registered charity under English law.
The Black Country Living Museum (formerly The Black Country Museum) is an open-air museum of rebuilt historic buildings in Dudley in the West Midlands of England. It is located in the centre of the Black Country, 10 miles west of Birmingham. The museum occupies 105,000 square metres (26 acres) of former industrial land partly reclaimed from a former railway goods yard, disused lime kilns, canal arm and former coal pits.
The museum opened to the public in 1978, and has since added over 50 shops, houses and other industrial buildings from around the Metropolitan Boroughs of Dudley, Sandwell and Walsall and the City of Wolverhampton (collectively known as the Black Country); mainly in a specially built village. Most buildings were relocated from their original sites to form a base from where demonstrators portray life spanning 300 years of history, with a focus on 1850-1950.
The museum is constantly improving as new exhibits, especially buildings, are being added.
The museum is close to the site where Dud Dudley first mastered the technique of smelting iron with coal instead of wood charcoal and making iron enough for industrial use. Having a claim to be "the birthplace of the Industrial Revolution", the Black Country is famous for its wide range of midsteel-based products from nails to the anchor and anchor chain for the Titanic.
The site's coal mining heritage is shown by an underground drift and colliery surface buildings. The museum has a working replica of a Newcomen atmospheric engine which was first successfully put to use in Tipton in 1712. The museum's reconstruction was based on a print engraved by Thomas Barney, filemaker of Wolverhampton, in 1719.
Electric trams and trolleybuses transport visitors from the entrance to the village where thirty domestic and industrial buildings have been relocated close to the canal basin. The museum is one of three in the UK with working trolleybuses. The route to the village passes the Cast Iron Houses and a 1930s fairground. A narrowboat operated by Dudley Canal Trust makes trips on the Dudley Canal and into the Dudley Tunnel
On 16 February 2012, the museum's collection was awarded designated status by Arts Council England (ACE), a mark of distinction celebrating its unique national and international importance.
The museum is run by the Black Country Living Museum Trust, a registered charity under English law.
The Black Country Living Museum (formerly The Black Country Museum) is an open-air museum of rebuilt historic buildings in Dudley in the West Midlands of England. It is located in the centre of the Black Country, 10 miles west of Birmingham. The museum occupies 105,000 square metres (26 acres) of former industrial land partly reclaimed from a former railway goods yard, disused lime kilns, canal arm and former coal pits.
The museum opened to the public in 1978, and has since added over 50 shops, houses and other industrial buildings from around the Metropolitan Boroughs of Dudley, Sandwell and Walsall and the City of Wolverhampton (collectively known as the Black Country); mainly in a specially built village. Most buildings were relocated from their original sites to form a base from where demonstrators portray life spanning 300 years of history, with a focus on 1850-1950.
The museum is constantly improving as new exhibits, especially buildings, are being added.
The museum is close to the site where Dud Dudley first mastered the technique of smelting iron with coal instead of wood charcoal and making iron enough for industrial use. Having a claim to be "the birthplace of the Industrial Revolution", the Black Country is famous for its wide range of midsteel-based products from nails to the anchor and anchor chain for the Titanic.
The site's coal mining heritage is shown by an underground drift and colliery surface buildings. The museum has a working replica of a Newcomen atmospheric engine which was first successfully put to use in Tipton in 1712. The museum's reconstruction was based on a print engraved by Thomas Barney, filemaker of Wolverhampton, in 1719.
Electric trams and trolleybuses transport visitors from the entrance to the village where thirty domestic and industrial buildings have been relocated close to the canal basin. The museum is one of three in the UK with working trolleybuses. The route to the village passes the Cast Iron Houses and a 1930s fairground. A narrowboat operated by Dudley Canal Trust makes trips on the Dudley Canal and into the Dudley Tunnel
On 16 February 2012, the museum's collection was awarded designated status by Arts Council England (ACE), a mark of distinction celebrating its unique national and international importance.
The museum is run by the Black Country Living Museum Trust, a registered charity under English law.
The Black Country Living Museum (formerly The Black Country Museum) is an open-air museum of rebuilt historic buildings in Dudley in the West Midlands of England. It is located in the centre of the Black Country, 10 miles west of Birmingham. The museum occupies 105,000 square metres (26 acres) of former industrial land partly reclaimed from a former railway goods yard, disused lime kilns, canal arm and former coal pits.
The museum opened to the public in 1978, and has since added over 50 shops, houses and other industrial buildings from around the Metropolitan Boroughs of Dudley, Sandwell and Walsall and the City of Wolverhampton (collectively known as the Black Country); mainly in a specially built village. Most buildings were relocated from their original sites to form a base from where demonstrators portray life spanning 300 years of history, with a focus on 1850-1950.
The museum is constantly improving as new exhibits, especially buildings, are being added.
The museum is close to the site where Dud Dudley first mastered the technique of smelting iron with coal instead of wood charcoal and making iron enough for industrial use. Having a claim to be "the birthplace of the Industrial Revolution", the Black Country is famous for its wide range of midsteel-based products from nails to the anchor and anchor chain for the Titanic.
The site's coal mining heritage is shown by an underground drift and colliery surface buildings. The museum has a working replica of a Newcomen atmospheric engine which was first successfully put to use in Tipton in 1712. The museum's reconstruction was based on a print engraved by Thomas Barney, filemaker of Wolverhampton, in 1719.
Electric trams and trolleybuses transport visitors from the entrance to the village where thirty domestic and industrial buildings have been relocated close to the canal basin. The museum is one of three in the UK with working trolleybuses. The route to the village passes the Cast Iron Houses and a 1930s fairground. A narrowboat operated by Dudley Canal Trust makes trips on the Dudley Canal and into the Dudley Tunnel
On 16 February 2012, the museum's collection was awarded designated status by Arts Council England (ACE), a mark of distinction celebrating its unique national and international importance.
The museum is run by the Black Country Living Museum Trust, a registered charity under English law.
The Black Country Living Museum (formerly The Black Country Museum) is an open-air museum of rebuilt historic buildings in Dudley in the West Midlands of England. It is located in the centre of the Black Country, 10 miles west of Birmingham. The museum occupies 105,000 square metres (26 acres) of former industrial land partly reclaimed from a former railway goods yard, disused lime kilns, canal arm and former coal pits.
The museum opened to the public in 1978, and has since added over 50 shops, houses and other industrial buildings from around the Metropolitan Boroughs of Dudley, Sandwell and Walsall and the City of Wolverhampton (collectively known as the Black Country); mainly in a specially built village. Most buildings were relocated from their original sites to form a base from where demonstrators portray life spanning 300 years of history, with a focus on 1850-1950.
The museum is constantly improving as new exhibits, especially buildings, are being added.
The museum is close to the site where Dud Dudley first mastered the technique of smelting iron with coal instead of wood charcoal and making iron enough for industrial use. Having a claim to be "the birthplace of the Industrial Revolution", the Black Country is famous for its wide range of midsteel-based products from nails to the anchor and anchor chain for the Titanic.
The site's coal mining heritage is shown by an underground drift and colliery surface buildings. The museum has a working replica of a Newcomen atmospheric engine which was first successfully put to use in Tipton in 1712. The museum's reconstruction was based on a print engraved by Thomas Barney, filemaker of Wolverhampton, in 1719.
Electric trams and trolleybuses transport visitors from the entrance to the village where thirty domestic and industrial buildings have been relocated close to the canal basin. The museum is one of three in the UK with working trolleybuses. The route to the village passes the Cast Iron Houses and a 1930s fairground. A narrowboat operated by Dudley Canal Trust makes trips on the Dudley Canal and into the Dudley Tunnel
On 16 February 2012, the museum's collection was awarded designated status by Arts Council England (ACE), a mark of distinction celebrating its unique national and international importance.
The museum is run by the Black Country Living Museum Trust, a registered charity under English law.
The Black Country Living Museum (formerly The Black Country Museum) is an open-air museum of rebuilt historic buildings in Dudley in the West Midlands of England. It is located in the centre of the Black Country, 10 miles west of Birmingham. The museum occupies 105,000 square metres (26 acres) of former industrial land partly reclaimed from a former railway goods yard, disused lime kilns, canal arm and former coal pits.
The museum opened to the public in 1978, and has since added over 50 shops, houses and other industrial buildings from around the Metropolitan Boroughs of Dudley, Sandwell and Walsall and the City of Wolverhampton (collectively known as the Black Country); mainly in a specially built village. Most buildings were relocated from their original sites to form a base from where demonstrators portray life spanning 300 years of history, with a focus on 1850-1950.
The museum is constantly improving as new exhibits, especially buildings, are being added.
The museum is close to the site where Dud Dudley first mastered the technique of smelting iron with coal instead of wood charcoal and making iron enough for industrial use.
Having a claim to be "the birthplace of the Industrial Revolution", the Black Country is famous for its wide range of midsteel-based products from nails to the anchor and anchor chain for the Titanic.
The site's coal mining heritage is shown by an underground drift and colliery surface buildings. The museum has a working replica of a Newcomen atmospheric engine which was first successfully put to use in Tipton in 1712. The museum's reconstruction was based on a print engraved by Thomas Barney, filemaker of Wolverhampton, in 1719.
Electric trams and trolleybuses transport visitors from the entrance to the village where thirty domestic and industrial buildings have been relocated close to the canal basin. The museum is one of three in the UK with working trolleybuses.
The route to the village passes the Cast Iron Houses and a 1930s fairground. A narrowboat operated by Dudley Canal Trust makes trips on the Dudley Canal and into the Dudley Tunnel
On 16 February 2012, the museum's collection was awarded designated status by Arts Council England (ACE), a mark of distinction celebrating its unique national and international importance.
The museum is run by the Black Country Living Museum Trust, a registered charity under English law.
The Black Country Living Museum (formerly The Black Country Museum) is an open-air museum of rebuilt historic buildings in Dudley in the West Midlands of England. It is located in the centre of the Black Country, 10 miles west of Birmingham. The museum occupies 105,000 square metres (26 acres) of former industrial land partly reclaimed from a former railway goods yard, disused lime kilns, canal arm and former coal pits.
The museum opened to the public in 1978, and has since added over 50 shops, houses and other industrial buildings from around the Metropolitan Boroughs of Dudley, Sandwell and Walsall and the City of Wolverhampton (collectively known as the Black Country); mainly in a specially built village. Most buildings were relocated from their original sites to form a base from where demonstrators portray life spanning 300 years of history, with a focus on 1850-1950.
The museum is constantly improving as new exhibits, especially buildings, are being added.
The museum is close to the site where Dud Dudley first mastered the technique of smelting iron with coal instead of wood charcoal and making iron enough for industrial use. Having a claim to be "the birthplace of the Industrial Revolution", the Black Country is famous for its wide range of midsteel-based products from nails to the anchor and anchor chain for the Titanic.
The site's coal mining heritage is shown by an underground drift and colliery surface buildings. The museum has a working replica of a Newcomen atmospheric engine which was first successfully put to use in Tipton in 1712. The museum's reconstruction was based on a print engraved by Thomas Barney, filemaker of Wolverhampton, in 1719.
Electric trams and trolleybuses transport visitors from the entrance to the village where thirty domestic and industrial buildings have been relocated close to the canal basin. The museum is one of three in the UK with working trolleybuses. The route to the village passes the Cast Iron Houses and a 1930s fairground. A narrowboat operated by Dudley Canal Trust makes trips on the Dudley Canal and into the Dudley Tunnel
On 16 February 2012, the museum's collection was awarded designated status by Arts Council England (ACE), a mark of distinction celebrating its unique national and international importance.
The museum is run by the Black Country Living Museum Trust, a registered charity under English law.
The Black Country Living Museum (formerly The Black Country Museum) is an open-air museum of rebuilt historic buildings in Dudley in the West Midlands of England. It is located in the centre of the Black Country, 10 miles west of Birmingham. The museum occupies 105,000 square metres (26 acres) of former industrial land partly reclaimed from a former railway goods yard, disused lime kilns, canal arm and former coal pits.
The museum opened to the public in 1978, and has since added over 50 shops, houses and other industrial buildings from around the Metropolitan Boroughs of Dudley, Sandwell and Walsall and the City of Wolverhampton (collectively known as the Black Country); mainly in a specially built village. Most buildings were relocated from their original sites to form a base from where demonstrators portray life spanning 300 years of history, with a focus on 1850-1950.
The museum is constantly improving as new exhibits, especially buildings, are being added.
The museum is close to the site where Dud Dudley first mastered the technique of smelting iron with coal instead of wood charcoal and making iron enough for industrial use. Having a claim to be "the birthplace of the Industrial Revolution", the Black Country is famous for its wide range of midsteel-based products from nails to the anchor and anchor chain for the Titanic.
The site's coal mining heritage is shown by an underground drift and colliery surface buildings. The museum has a working replica of a Newcomen atmospheric engine which was first successfully put to use in Tipton in 1712. The museum's reconstruction was based on a print engraved by Thomas Barney, filemaker of Wolverhampton, in 1719.
Electric trams and trolleybuses transport visitors from the entrance to the village where thirty domestic and industrial buildings have been relocated close to the canal basin. The museum is one of three in the UK with working trolleybuses. The route to the village passes the Cast Iron Houses and a 1930s fairground. A narrowboat operated by Dudley Canal Trust makes trips on the Dudley Canal and into the Dudley Tunnel
On 16 February 2012, the museum's collection was awarded designated status by Arts Council England (ACE), a mark of distinction celebrating its unique national and international importance.
The museum is run by the Black Country Living Museum Trust, a registered charity under English law.
The Black Country Living Museum (formerly The Black Country Museum) is an open-air museum of rebuilt historic buildings in Dudley in the West Midlands of England. It is located in the centre of the Black Country, 10 miles west of Birmingham. The museum occupies 105,000 square metres (26 acres) of former industrial land partly reclaimed from a former railway goods yard, disused lime kilns, canal arm and former coal pits.
The museum opened to the public in 1978, and has since added over 50 shops, houses and other industrial buildings from around the Metropolitan Boroughs of Dudley, Sandwell and Walsall and the City of Wolverhampton (collectively known as the Black Country); mainly in a specially built village. Most buildings were relocated from their original sites to form a base from where demonstrators portray life spanning 300 years of history, with a focus on 1850-1950.
The museum is constantly improving as new exhibits, especially buildings, are being added.
The museum is close to the site where Dud Dudley first mastered the technique of smelting iron with coal instead of wood charcoal and making iron enough for industrial use. Having a claim to be "the birthplace of the Industrial Revolution", the Black Country is famous for its wide range of midsteel-based products from nails to the anchor and anchor chain for the Titanic.
The site's coal mining heritage is shown by an underground drift and colliery surface buildings. The museum has a working replica of a Newcomen atmospheric engine which was first successfully put to use in Tipton in 1712. The museum's reconstruction was based on a print engraved by Thomas Barney, filemaker of Wolverhampton, in 1719.
Electric trams and trolleybuses transport visitors from the entrance to the village where thirty domestic and industrial buildings have been relocated close to the canal basin. The museum is one of three in the UK with working trolleybuses. The route to the village passes the Cast Iron Houses and a 1930s fairground. A narrowboat operated by Dudley Canal Trust makes trips on the Dudley Canal and into the Dudley Tunnel
On 16 February 2012, the museum's collection was awarded designated status by Arts Council England (ACE), a mark of distinction celebrating its unique national and international importance.
The museum is run by the Black Country Living Museum Trust, a registered charity under English law.
The Black Country Living Museum (formerly The Black Country Museum) is an open-air museum of rebuilt historic buildings in Dudley in the West Midlands of England. It is located in the centre of the Black Country, 10 miles west of Birmingham. The museum occupies 105,000 square metres (26 acres) of former industrial land partly reclaimed from a former railway goods yard, disused lime kilns, canal arm and former coal pits.
The museum opened to the public in 1978, and has since added over 50 shops, houses and other industrial buildings from around the Metropolitan Boroughs of Dudley, Sandwell and Walsall and the City of Wolverhampton (collectively known as the Black Country); mainly in a specially built village. Most buildings were relocated from their original sites to form a base from where demonstrators portray life spanning 300 years of history, with a focus on 1850-1950.
The museum is constantly improving as new exhibits, especially buildings, are being added.
The museum is close to the site where Dud Dudley first mastered the technique of smelting iron with coal instead of wood charcoal and making iron enough for industrial use. Having a claim to be "the birthplace of the Industrial Revolution", the Black Country is famous for its wide range of midsteel-based products from nails to the anchor and anchor chain for the Titanic.
The site's coal mining heritage is shown by an underground drift and colliery surface buildings. The museum has a working replica of a Newcomen atmospheric engine which was first successfully put to use in Tipton in 1712. The museum's reconstruction was based on a print engraved by Thomas Barney, filemaker of Wolverhampton, in 1719.
Electric trams and trolleybuses transport visitors from the entrance to the village where thirty domestic and industrial buildings have been relocated close to the canal basin. The museum is one of three in the UK with working trolleybuses. The route to the village passes the Cast Iron Houses and a 1930s fairground. A narrowboat operated by Dudley Canal Trust makes trips on the Dudley Canal and into the Dudley Tunnel
On 16 February 2012, the museum's collection was awarded designated status by Arts Council England (ACE), a mark of distinction celebrating its unique national and international importance.
The museum is run by the Black Country Living Museum Trust, a registered charity under English law.
The Black Country Living Museum (formerly The Black Country Museum) is an open-air museum of rebuilt historic buildings in Dudley in the West Midlands of England. It is located in the centre of the Black Country, 10 miles west of Birmingham. The museum occupies 105,000 square metres (26 acres) of former industrial land partly reclaimed from a former railway goods yard, disused lime kilns, canal arm and former coal pits.
The museum opened to the public in 1978, and has since added over 50 shops, houses and other industrial buildings from around the Metropolitan Boroughs of Dudley, Sandwell and Walsall and the City of Wolverhampton (collectively known as the Black Country); mainly in a specially built village. Most buildings were relocated from their original sites to form a base from where demonstrators portray life spanning 300 years of history, with a focus on 1850-1950.
The museum is constantly improving as new exhibits, especially buildings, are being added.
The museum is close to the site where Dud Dudley first mastered the technique of smelting iron with coal instead of wood charcoal and making iron enough for industrial use. Having a claim to be "the birthplace of the Industrial Revolution", the Black Country is famous for its wide range of midsteel-based products from nails to the anchor and anchor chain for the Titanic.
The site's coal mining heritage is shown by an underground drift and colliery surface buildings. The museum has a working replica of a Newcomen atmospheric engine which was first successfully put to use in Tipton in 1712. The museum's reconstruction was based on a print engraved by Thomas Barney, filemaker of Wolverhampton, in 1719.
Electric trams and trolleybuses transport visitors from the entrance to the village where thirty domestic and industrial buildings have been relocated close to the canal basin. The museum is one of three in the UK with working trolleybuses. The route to the village passes the Cast Iron Houses and a 1930s fairground. A narrowboat operated by Dudley Canal Trust makes trips on the Dudley Canal and into the Dudley Tunnel
On 16 February 2012, the museum's collection was awarded designated status by Arts Council England (ACE), a mark of distinction celebrating its unique national and international importance.
The museum is run by the Black Country Living Museum Trust, a registered charity under English law.
The Black Country Living Museum (formerly The Black Country Museum) is an open-air museum of rebuilt historic buildings in Dudley in the West Midlands of England. It is located in the centre of the Black Country, 10 miles west of Birmingham. The museum occupies 105,000 square metres (26 acres) of former industrial land partly reclaimed from a former railway goods yard, disused lime kilns, canal arm and former coal pits.
The museum opened to the public in 1978, and has since added over 50 shops, houses and other industrial buildings from around the Metropolitan Boroughs of Dudley, Sandwell and Walsall and the City of Wolverhampton (collectively known as the Black Country); mainly in a specially built village. Most buildings were relocated from their original sites to form a base from where demonstrators portray life spanning 300 years of history, with a focus on 1850-1950.
The museum is constantly improving as new exhibits, especially buildings, are being added.
The museum is close to the site where Dud Dudley first mastered the technique of smelting iron with coal instead of wood charcoal and making iron enough for industrial use. Having a claim to be "the birthplace of the Industrial Revolution", the Black Country is famous for its wide range of midsteel-based products from nails to the anchor and anchor chain for the Titanic.
The site's coal mining heritage is shown by an underground drift and colliery surface buildings. The museum has a working replica of a Newcomen atmospheric engine which was first successfully put to use in Tipton in 1712. The museum's reconstruction was based on a print engraved by Thomas Barney, filemaker of Wolverhampton, in 1719.
Electric trams and trolleybuses transport visitors from the entrance to the village where thirty domestic and industrial buildings have been relocated close to the canal basin. The museum is one of three in the UK with working trolleybuses. The route to the village passes the Cast Iron Houses and a 1930s fairground. A narrowboat operated by Dudley Canal Trust makes trips on the Dudley Canal and into the Dudley Tunnel
On 16 February 2012, the museum's collection was awarded designated status by Arts Council England (ACE), a mark of distinction celebrating its unique national and international importance.
The museum is run by the Black Country Living Museum Trust, a registered charity under English law.
Dear Flickr friends - I wish you a Merry Christmas!
And all the best for the New Year!
(Hold your mouse over the little pics to display some comments about the shown events of my personal year 2013)
The Black Country Living Museum (formerly The Black Country Museum) is an open-air museum of rebuilt historic buildings in Dudley in the West Midlands of England. It is located in the centre of the Black Country, 10 miles west of Birmingham. The museum occupies 105,000 square metres (26 acres) of former industrial land partly reclaimed from a former railway goods yard, disused lime kilns, canal arm and former coal pits.
The museum opened to the public in 1978, and has since added over 50 shops, houses and other industrial buildings from around the Metropolitan Boroughs of Dudley, Sandwell and Walsall and the City of Wolverhampton (collectively known as the Black Country); mainly in a specially built village. Most buildings were relocated from their original sites to form a base from where demonstrators portray life spanning 300 years of history, with a focus on 1850-1950.
The museum is constantly improving as new exhibits, especially buildings, are being added.
The museum is close to the site where Dud Dudley first mastered the technique of smelting iron with coal instead of wood charcoal and making iron enough for industrial use. Having a claim to be "the birthplace of the Industrial Revolution", the Black Country is famous for its wide range of midsteel-based products from nails to the anchor and anchor chain for the Titanic.
The site's coal mining heritage is shown by an underground drift and colliery surface buildings. The museum has a working replica of a Newcomen atmospheric engine which was first successfully put to use in Tipton in 1712. The museum's reconstruction was based on a print engraved by Thomas Barney, filemaker of Wolverhampton, in 1719.
Electric trams and trolleybuses transport visitors from the entrance to the village where thirty domestic and industrial buildings have been relocated close to the canal basin. The museum is one of three in the UK with working trolleybuses. The route to the village passes the Cast Iron Houses and a 1930s fairground. A narrowboat operated by Dudley Canal Trust makes trips on the Dudley Canal and into the Dudley Tunnel
On 16 February 2012, the museum's collection was awarded designated status by Arts Council England (ACE), a mark of distinction celebrating its unique national and international importance.
The museum is run by the Black Country Living Museum Trust, a registered charity under English law.
The Black Country Living Museum (formerly The Black Country Museum) is an open-air museum of rebuilt historic buildings in Dudley in the West Midlands of England. It is located in the centre of the Black Country, 10 miles west of Birmingham. The museum occupies 105,000 square metres (26 acres) of former industrial land partly reclaimed from a former railway goods yard, disused lime kilns, canal arm and former coal pits.
The museum opened to the public in 1978, and has since added over 50 shops, houses and other industrial buildings from around the Metropolitan Boroughs of Dudley, Sandwell and Walsall and the City of Wolverhampton (collectively known as the Black Country); mainly in a specially built village. Most buildings were relocated from their original sites to form a base from where demonstrators portray life spanning 300 years of history, with a focus on 1850-1950.
The museum is constantly improving as new exhibits, especially buildings, are being added.
The museum is close to the site where Dud Dudley first mastered the technique of smelting iron with coal instead of wood charcoal and making iron enough for industrial use.
Having a claim to be "the birthplace of the Industrial Revolution", the Black Country is famous for its wide range of midsteel-based products from nails to the anchor and anchor chain for the Titanic.
The site's coal mining heritage is shown by an underground drift and colliery surface buildings. The museum has a working replica of a Newcomen atmospheric engine which was first successfully put to use in Tipton in 1712. The museum's reconstruction was based on a print engraved by Thomas Barney, filemaker of Wolverhampton, in 1719.
Electric trams and trolleybuses transport visitors from the entrance to the village where thirty domestic and industrial buildings have been relocated close to the canal basin. The museum is one of three in the UK with working trolleybuses.
The route to the village passes the Cast Iron Houses and a 1930s fairground. A narrowboat operated by Dudley Canal Trust makes trips on the Dudley Canal and into the Dudley Tunnel
On 16 February 2012, the museum's collection was awarded designated status by Arts Council England (ACE), a mark of distinction celebrating its unique national and international importance.
The museum is run by the Black Country Living Museum Trust, a registered charity under English law.
Latest FileMaker News | FileMaker Pro 15 | FileMaker 15 Video Training youtu.be/iKcpzdvFRv8 Richard Carlton shares the latest news and updates in the FileMaker community. Get up to speed with the FileMaker Pro 15 Video Training Course! Top Rated Course by FileMaker Expert, Richard Carlton. learningfilemaker.com/fmpro15.php Experience Richard's dynamic and exciting teaching format, while learning both basic, intermediate, and advanced FileMaker development skills. With 26 years of FileMaker experience and a long time speaker at FileMaker's Developer Conference,Richard will teach you all the ins and outs of building FileMaker Solutions. The course is 40 hours of video content! Richard has been involved with the FileMaker platform since 1990 and has grown RCC into one of the largest top tier FileMaker consultancies worldwide. Richard works closely with RCC's staff: a team of 28 FileMaker developers and supporting web designers. He has offices in California, Nevada, and Texas. Richard has been a frequent speaker at the FileMaker Developers Conference on a variety of topics involving FileMaker for Startups and Entrepreneurs, and client server integration. Richard is the Product Manager for FM Starting Point, the popular and most downloaded free FileMaker CRM Starter Solution. Richard won 2015 Excellence Award from FileMaker Inc (Apple Inc) for outstanding video and product creation, leading to business development. RCC and LearningFileMaker.com are headquartered in Santa Clara, CA. www.rcconsulting.com/ Please feel free to contact us at support@rcconsulting.com If you want to explore building I.O.S apps for I Phone or I Pad and deploying those out to the Apple App Store. Here is a video introduction to our iOS App Training www.youtube.com/watch?v=cVxQe_yAshw Looking for FM Starting Point free software download: www.fmstartingpoint.com For More Free FileMaker Videos Check out www.filemakerfree.com Visit www.learningfilemaker.com for all facets of FileMaker Award Winning Video Training. Please Visit Our Channel: www.youtube.com/user/FileMakerVideos Please Subscribe While There. Please Comment, Like & Share All of Our Videos. Feel Free to Embed any of Our Videos on Your Blog or Website. Follow Us on Your Favorite Social Media www.facebook.com/FileMakerVideos twitter.com/filemakervideos plus.google.com/+FileMakerVideos/videos Filemaker Pro 15 Training Videos FileMaker 15 Videos Filemaker Pro 15 Video Course #WhatisFilemaker15 #FilemakerPro15Training #Filemaker15VideoTutorial #FilemakerPro15Videos ~
Sharing a FileMaker 15 Solution with other Devices and Users | FileMaker 15 News youtu.be/-gaKZzCQ748 Get up to speed with the FileMaker Pro 15 Video Training Course! Top Rated Course by FileMaker Expert, Richard Carlton. learningfilemaker.com/fmpro15.php Experience Richard's dynamic and exciting teaching format, while learning both basic, intermediate, and advanced FileMaker development skills. With 26 years of FileMaker experience and a long time speaker at FileMaker's Developer Conference,Richard will teach you all the ins and outs of building FileMaker Solutions. The course is 40 hours of video content! Richard has been involved with the FileMaker platform since 1990 and has grown RCC into one of the largest top tier FileMaker consultancies worldwide. Richard works closely with RCC's staff: a team of 28 FileMaker developers and supporting web designers. He has offices in California, Nevada, and Texas. Richard has been a frequent speaker at the FileMaker Developers Conference on a variety of topics involving FileMaker for Startups and Entrepreneurs, and client server integration. Richard is the Product Manager for FM Starting Point, the popular and most downloaded free FileMaker CRM Starter Solution. Richard won 2015 Excellence Award from FileMaker Inc (Apple Inc) for outstanding video and product creation, leading to business development. RCC and LearningFileMaker.com are headquartered in Santa Clara, CA. www.rcconsulting.com/ Please feel free to contact us at support@rcconsulting.com If you want to explore building I.O.S apps for I Phone or I Pad and deploying those out to the Apple App Store. Here is a video introduction to our iOS App Training www.youtube.com/watch?v=cVxQe_yAshw Looking for FM Starting Point free software download: www.fmstartingpoint.com For More Free FileMaker Videos Check out www.filemakerfree.com Visit www.learningfilemaker.com for all facets of FileMaker Award Winning Video Training. Please Visit Our Channel: www.youtube.com/user/FileMakerVideos Please Subscribe While There. Please Comment, Like & Share All of Our Videos. Feel Free to Embed any of Our Videos on Your Blog or Website. Follow Us on Your Favorite Social Media www.facebook.com/FileMakerVideos twitter.com/filemakervideos plus.google.com/+FileMakerVideos/videos Filemaker Pro 15 Training Videos FileMaker 15 Videos Filemaker Pro 15 Video Course #WhatisFilemaker15 #FilemakerPro15Training #Filemaker15VideoTutorial #FilemakerPro15Videos
The Black Country Living Museum (formerly The Black Country Museum) is an open-air museum of rebuilt historic buildings in Dudley in the West Midlands of England. It is located in the centre of the Black Country, 10 miles west of Birmingham. The museum occupies 105,000 square metres (26 acres) of former industrial land partly reclaimed from a former railway goods yard, disused lime kilns, canal arm and former coal pits.
The museum opened to the public in 1978, and has since added over 50 shops, houses and other industrial buildings from around the Metropolitan Boroughs of Dudley, Sandwell and Walsall and the City of Wolverhampton (collectively known as the Black Country); mainly in a specially built village. Most buildings were relocated from their original sites to form a base from where demonstrators portray life spanning 300 years of history, with a focus on 1850-1950.
The museum is constantly improving as new exhibits, especially buildings, are being added.
The museum is close to the site where Dud Dudley first mastered the technique of smelting iron with coal instead of wood charcoal and making iron enough for industrial use.
Having a claim to be "the birthplace of the Industrial Revolution", the Black Country is famous for its wide range of midsteel-based products from nails to the anchor and anchor chain for the Titanic.
The site's coal mining heritage is shown by an underground drift and colliery surface buildings. The museum has a working replica of a Newcomen atmospheric engine which was first successfully put to use in Tipton in 1712. The museum's reconstruction was based on a print engraved by Thomas Barney, filemaker of Wolverhampton, in 1719.
Electric trams and trolleybuses transport visitors from the entrance to the village where thirty domestic and industrial buildings have been relocated close to the canal basin. The museum is one of three in the UK with working trolleybuses.
The route to the village passes the Cast Iron Houses and a 1930s fairground. A narrowboat operated by Dudley Canal Trust makes trips on the Dudley Canal and into the Dudley Tunnel
On 16 February 2012, the museum's collection was awarded designated status by Arts Council England (ACE), a mark of distinction celebrating its unique national and international importance.
The museum is run by the Black Country Living Museum Trust, a registered charity under English law.
The Black Country Living Museum (formerly The Black Country Museum) is an open-air museum of rebuilt historic buildings in Dudley in the West Midlands of England. It is located in the centre of the Black Country, 10 miles west of Birmingham. The museum occupies 105,000 square metres (26 acres) of former industrial land partly reclaimed from a former railway goods yard, disused lime kilns, canal arm and former coal pits.
The museum opened to the public in 1978, and has since added over 50 shops, houses and other industrial buildings from around the Metropolitan Boroughs of Dudley, Sandwell and Walsall and the City of Wolverhampton (collectively known as the Black Country); mainly in a specially built village. Most buildings were relocated from their original sites to form a base from where demonstrators portray life spanning 300 years of history, with a focus on 1850-1950.
The museum is constantly improving as new exhibits, especially buildings, are being added.
The museum is close to the site where Dud Dudley first mastered the technique of smelting iron with coal instead of wood charcoal and making iron enough for industrial use.
Having a claim to be "the birthplace of the Industrial Revolution", the Black Country is famous for its wide range of midsteel-based products from nails to the anchor and anchor chain for the Titanic.
The site's coal mining heritage is shown by an underground drift and colliery surface buildings. The museum has a working replica of a Newcomen atmospheric engine which was first successfully put to use in Tipton in 1712. The museum's reconstruction was based on a print engraved by Thomas Barney, filemaker of Wolverhampton, in 1719.
Electric trams and trolleybuses transport visitors from the entrance to the village where thirty domestic and industrial buildings have been relocated close to the canal basin. The museum is one of three in the UK with working trolleybuses.
The route to the village passes the Cast Iron Houses and a 1930s fairground. A narrowboat operated by Dudley Canal Trust makes trips on the Dudley Canal and into the Dudley Tunnel
On 16 February 2012, the museum's collection was awarded designated status by Arts Council England (ACE), a mark of distinction celebrating its unique national and international importance.
The museum is run by the Black Country Living Museum Trust, a registered charity under English law.
The Black Country Living Museum (formerly The Black Country Museum) is an open-air museum of rebuilt historic buildings in Dudley in the West Midlands of England. It is located in the centre of the Black Country, 10 miles west of Birmingham. The museum occupies 105,000 square metres (26 acres) of former industrial land partly reclaimed from a former railway goods yard, disused lime kilns, canal arm and former coal pits.
The museum opened to the public in 1978, and has since added over 50 shops, houses and other industrial buildings from around the Metropolitan Boroughs of Dudley, Sandwell and Walsall and the City of Wolverhampton (collectively known as the Black Country); mainly in a specially built village. Most buildings were relocated from their original sites to form a base from where demonstrators portray life spanning 300 years of history, with a focus on 1850-1950.
The museum is constantly improving as new exhibits, especially buildings, are being added.
The museum is close to the site where Dud Dudley first mastered the technique of smelting iron with coal instead of wood charcoal and making iron enough for industrial use. Having a claim to be "the birthplace of the Industrial Revolution", the Black Country is famous for its wide range of midsteel-based products from nails to the anchor and anchor chain for the Titanic.
The site's coal mining heritage is shown by an underground drift and colliery surface buildings. The museum has a working replica of a Newcomen atmospheric engine which was first successfully put to use in Tipton in 1712. The museum's reconstruction was based on a print engraved by Thomas Barney, filemaker of Wolverhampton, in 1719.
Electric trams and trolleybuses transport visitors from the entrance to the village where thirty domestic and industrial buildings have been relocated close to the canal basin. The museum is one of three in the UK with working trolleybuses. The route to the village passes the Cast Iron Houses and a 1930s fairground. A narrowboat operated by Dudley Canal Trust makes trips on the Dudley Canal and into the Dudley Tunnel
On 16 February 2012, the museum's collection was awarded designated status by Arts Council England (ACE), a mark of distinction celebrating its unique national and international importance.
The museum is run by the Black Country Living Museum Trust, a registered charity under English law.
The Black Country Living Museum (formerly The Black Country Museum) is an open-air museum of rebuilt historic buildings in Dudley in the West Midlands of England. It is located in the centre of the Black Country, 10 miles west of Birmingham. The museum occupies 105,000 square metres (26 acres) of former industrial land partly reclaimed from a former railway goods yard, disused lime kilns, canal arm and former coal pits.
The museum opened to the public in 1978, and has since added over 50 shops, houses and other industrial buildings from around the Metropolitan Boroughs of Dudley, Sandwell and Walsall and the City of Wolverhampton (collectively known as the Black Country); mainly in a specially built village. Most buildings were relocated from their original sites to form a base from where demonstrators portray life spanning 300 years of history, with a focus on 1850-1950.
The museum is constantly improving as new exhibits, especially buildings, are being added.
The museum is close to the site where Dud Dudley first mastered the technique of smelting iron with coal instead of wood charcoal and making iron enough for industrial use. Having a claim to be "the birthplace of the Industrial Revolution", the Black Country is famous for its wide range of midsteel-based products from nails to the anchor and anchor chain for the Titanic.
The site's coal mining heritage is shown by an underground drift and colliery surface buildings. The museum has a working replica of a Newcomen atmospheric engine which was first successfully put to use in Tipton in 1712. The museum's reconstruction was based on a print engraved by Thomas Barney, filemaker of Wolverhampton, in 1719.
Electric trams and trolleybuses transport visitors from the entrance to the village where thirty domestic and industrial buildings have been relocated close to the canal basin. The museum is one of three in the UK with working trolleybuses. The route to the village passes the Cast Iron Houses and a 1930s fairground. A narrowboat operated by Dudley Canal Trust makes trips on the Dudley Canal and into the Dudley Tunnel
On 16 February 2012, the museum's collection was awarded designated status by Arts Council England (ACE), a mark of distinction celebrating its unique national and international importance.
The museum is run by the Black Country Living Museum Trust, a registered charity under English law.
How to Duplicate Modules in FileMaker or FM Starting Point FMSP | FileMaker Pro 15 Videos youtu.be/MsrX2Uyup6w Get up to speed with the FileMaker Pro 15 Video Training Course! Top Rated Course by FileMaker Expert, Richard Carlton. learningfilemaker.com/fmpro15.php Experience Richard's dynamic and exciting teaching format, while learning both basic, intermediate, and advanced FileMaker development skills. With 26 years of FileMaker experience and a long time speaker at FileMaker's Developer Conference,Richard will teach you all the ins and outs of building FileMaker Solutions. The course is 40 hours of video content! Richard has been involved with the FileMaker platform since 1990 and has grown RCC into one of the largest top tier FileMaker consultancies worldwide. Richard works closely with RCC's staff: a team of 28 FileMaker developers and supporting web designers. He has offices in California, Nevada, and Texas. Richard has been a frequent speaker at the FileMaker Developers Conference on a variety of topics involving FileMaker for Startups and Entrepreneurs, and client server integration. Richard is the Product Manager for FM Starting Point, the popular and most downloaded free FileMaker CRM Starter Solution. Richard won 2015 Excellence Award from FileMaker Inc (Apple Inc) for outstanding video and product creation, leading to business development. RCC and LearningFileMaker.com are headquartered in Santa Clara, CA. www.rcconsulting.com/ Please feel free to contact us at support@rcconsulting.com If you want to explore building I.O.S apps for I Phone or I Pad and deploying those out to the Apple App Store. Here is a video introduction to our iOS App Training www.youtube.com/watch?v=cVxQe_yAshw Looking for FM Starting Point free software download: www.fmstartingpoint.com For More Free FileMaker Videos Check out www.filemakerfree.com Visit www.learningfilemaker.com for all facets of FileMaker Award Winning Video Training. Please Visit Our Channel: www.youtube.com/user/FileMakerVideos Please Subscribe While There. Please Comment, Like & Share All of Our Videos. Feel Free to Embed any of Our Videos on Your Blog or Website. Follow Us on Your Favorite Social Media www.facebook.com/FileMakerVideos twitter.com/filemakervideos plus.google.com/+FileMakerVideos/videos Filemaker Pro 15 Training Videos FileMaker 15 Videos Filemaker Pro 15 Video Course #WhatisFilemaker15 #FilemakerPro15Training #Filemaker15VideoTutorial #FilemakerPro15Videos
The Black Country Living Museum (formerly The Black Country Museum) is an open-air museum of rebuilt historic buildings in Dudley in the West Midlands of England. It is located in the centre of the Black Country, 10 miles west of Birmingham. The museum occupies 105,000 square metres (26 acres) of former industrial land partly reclaimed from a former railway goods yard, disused lime kilns, canal arm and former coal pits.
The museum opened to the public in 1978, and has since added over 50 shops, houses and other industrial buildings from around the Metropolitan Boroughs of Dudley, Sandwell and Walsall and the City of Wolverhampton (collectively known as the Black Country); mainly in a specially built village. Most buildings were relocated from their original sites to form a base from where demonstrators portray life spanning 300 years of history, with a focus on 1850-1950.
The museum is constantly improving as new exhibits, especially buildings, are being added.
The museum is close to the site where Dud Dudley first mastered the technique of smelting iron with coal instead of wood charcoal and making iron enough for industrial use. Having a claim to be "the birthplace of the Industrial Revolution", the Black Country is famous for its wide range of midsteel-based products from nails to the anchor and anchor chain for the Titanic.
The site's coal mining heritage is shown by an underground drift and colliery surface buildings. The museum has a working replica of a Newcomen atmospheric engine which was first successfully put to use in Tipton in 1712. The museum's reconstruction was based on a print engraved by Thomas Barney, filemaker of Wolverhampton, in 1719.
Electric trams and trolleybuses transport visitors from the entrance to the village where thirty domestic and industrial buildings have been relocated close to the canal basin. The museum is one of three in the UK with working trolleybuses. The route to the village passes the Cast Iron Houses and a 1930s fairground. A narrowboat operated by Dudley Canal Trust makes trips on the Dudley Canal and into the Dudley Tunnel
On 16 February 2012, the museum's collection was awarded designated status by Arts Council England (ACE), a mark of distinction celebrating its unique national and international importance.
The museum is run by the Black Country Living Museum Trust, a registered charity under English law.
Been an Apple user since the Apple III and then migrated to the Macintosh SE in '87. Stuck with Apple through thick and thin (the days after they fired Steve Jobs, the Pepsi guy, and later when they brought him back, and sadly when he died). I've owned more of their products over the years than I care to admit. I was generally happy with each, but I was really pissed when my 27" iMac was rendered effectively useless when it could no longer be updated to the latest system software, which in turn, killed the upgrade path for several software products I use for work (MS Excel, FileMaker Pro) and for play (Adobe Lr and Photoshop). Eventually I was forced (at the last minute for tax reasons) to replace the 27-incher for a dinky-sized 24" iMac. And buddy, I was aggravated by that wimpy, downsized monitor every damn time I sat down in front of it! The only escape was to dump the convenience of the iMac's one-piece design and go back to an external CPU (something I swore I would never do). Dumping the claustrophobic iMac 24 would mean shelling out for both the Apple 27" Studio Display I did want, and then choosing between the external CPUs I didn't want. The external options came in two flavors: too small and too expensive. In an effort to keep the price of the total package reasonable, I went with a Mac mini. To get over the "too small" issue, my brother and I cracked it open, yanked out its paltry 256GB SSD guts, and replaced it/them with a more reasonably sized 2TB SSD (the operation was a success). And you know what? Turns out that Mini ain't half-bad after all. And the 27" Apple Studio Display? Well that was the whole point wasn't' it? It's a great monitor--too expensive for sure, but I'm back in the land of 5k resolution with plenty of screen space, so I'm not complaining about it! However, as is par for the course, I understand Apple will be introducing a new 32 inch, 6K monitor in the near future. I very well might be complaining then!
IMG_4613
* Apple
* Store
* Mac
* iPod + iTunes
* iPhone
* Downloads
* Support
Search
*
You are invited to take part in a short survey to help us improve your
Apple Support online experience. Please click Yes if you would like to participate.
Yes No
Power Mac G4 (Mirrored Drive Doors) - Technical Specifications
Configurations
Order no. M8787LL/A M8689LL/A M8573LL/A
Processor Dual 867MHz PowerPC G4 Dual 1GHz PowerPC G4 Dual 1.25GHz PowerPC G4
L3 cache 1MB DDR SRAM per processor 1MB DDR SRAM per processor 2MB DDR SRAM per processor
System bus 133MHz 167MHz 167MHz
Main memory (2GB maximum3) 256MB PC2100 (266MHz) DDR SDRAM 256MB PC2700 (333MHz) DDR SDRAM 512MB PC2700 (333MHz) DDR SDRAM
Hard drive4 60GB Ultra ATA/100; 7200 rpm 80GB Ultra ATA/100; 7200 rpm 120GB Ultra ATA/100; 7200 rpm
Optical drive Combo (DVD-ROM/CD-RW) SuperDrive (DVD-R/CD-RW) SuperDrive (DVD-R/CD-RW)
Graphics support NVIDIA GeForce4 MX with
32MB of DDR SDRAM ATI Radeon 9000 Pro with
64MB of DDR SDRAM ATI Radeon 9000 Pro with
64MB of DDR SDRAM
Expansion slots and bays Four open 64-bit, 33MHz PCI slots; AGP 4X slot with graphics card installed; four internal hard drive bays (one occupied); two optical drive bays (one occupied)
Ports Two FireWire, four USB, front headphone minijack and speaker, rear Apple speaker minijack, audio line in, audio line out, ADC and DVI connectors for dual display support
Networking Built-in 10/100/1000BASE-T Ethernet and 56K modem6; AirPort ready5
Software Mac OS X, Mac OS 9, QuickTime, iChat, iMovie, iPhoto, iTunes, iDVD (requires SuperDrive), DVD Player, Mac OS X Mail, Microsoft Internet Explorer, EarthLink (includes 30 days of free service), Acrobat Reader, Art Director’s Toolkit, FAXstf, FileMaker Pro Trial, Graphic Converter, OmniGraffle, OmniOutliner, PixelNhance, Snapz Pro, Developer Tools
Service and support 90 days of free telephone support and one-year limited warranty
Included Apple Pro Keyboard, Apple Pro Mouse, DVI to VGA adapter, modem cable
Internet access requires a compatible Internet service provider; fees may apply. Product contains electronic documentation. Backup copy of software is provided on CD-ROM.
Options
Processor Dual 867MHz, dual 1GHz, dual 1.25GHz
Memory (PC2100 or PC2700 DDR SDRAM): 256MB, 512MB, 1GB, 1.5GB, 2GB
Hard drives 60GB Ultra ATA/100 (7200 rpm), 80GB Ultra ATA/100 (7200 rpm), 120GB Ultra ATA/100 (7200 rpm), 36GB Ultra160 SCSI (10,000 rpm), 72GB Ultra160 SCSI (10,000 rpm)4
Optical drives SuperDrive (DVD-R/CD-RW), Combo drive (DVD-ROM/CD-RW)
Graphics NVIDIA GeForce4 MX with 32MB DDR SDRAM, ATI Radeon 9000 Pro with 64MB DDR SDRAM, NVIDIA GeForce4 Ti with 128MB DDR SDRAM
Audio Apple Pro Speakers, Apple iPod, Harman Kardon iSub, Harman Kardon SoundSticks
Other AirPort Card, AirPort Base Station, Ultra SCSI PCI card, Ultra160 SCSI PCI card, Bluetooth adapter, DVD-R Media Kit
Technical Specifications
Processing and memory
* Dual 867MHz, 1GHz, or 1.25GHz PowerPC G4 processors
* Velocity Engine vector processing unit
* Full 128-bit internal memory data paths
* Powerful floating-point unit supporting single-cycle, double-precision calculations
* Data stream prefetching operations supporting four simultaneous 32-bit data streams
* 256K on-chip L2 cache running at processor speed
* Up to 2MB DDR SRAM L3 cache per processor with up to 4-GBps throughput
* Up to 167MHz system bus supporting over 1.3-GBps data throughput
* 256MB or 512MB of PC2100 or PC2700 DDR SDRAM main memory supporting up to 2.7-GBps throughput
* Four DIMM slots supporting up to 2GB of DDR SDRAM using one of the following3:
—256MB DIMMs (64-bit-wide, 128-Mbit)
—512MB DIMMs (64-bit-wide, 256-Mbit)
Graphics and display support
* One of the following graphics cards installed in a dedicated AGP 4X graphics slot:
—NVIDIA GeForce4 MX graphics card with 32MB of DDR SDRAM
—ATI Radeon 9000 Pro graphics card with 64MB of DDR SDRAM
—NVIDIA GeForce4 Ti graphics card with 128MB of DDR SDRAM (build-to-order option)
* Support for digital resolutions up to 1920 by 1200 pixels and analog resolutions up to 1600 by 1200 pixels
* ADC and DVI connectors; DVI to VGA adapter included
* Dual display support for extended desktop and video mirroring modes
* Support for up to two Apple displays
Storage and expansion
* Four 3.5-inch hard drive expansion bays
—One 7200-rpm Ultra ATA/100 drive preinstalled in standard configurations: 60GB, 80GB, or 120GB4
—Support for up to four internal ATA drives (two Ultra ATA/100 and two Ultra ATA/66)
—Support for up to four internal SCSI drives (requires PCI SCSI card, sold separately)
—Support for a combination of internal ATA and SCSI drives (total of four)
* One of the following optical drives:
—SuperDrive (DVD-R/CD-RW); writes DVD-R discs at 2x speed, reads DVDs at 6x speed, writes CD-R discs at 8x speed, writes CD-RW discs at 4x speed, reads CDs at 24x speed
—Combo drive (DVD-ROM/CD-RW); reads DVDs at 8x speed, writes CD-R discs at 16x speed, writes CD-RW discs at 10x speed, reads CDs at 32x speed
—Optional Combo drive in second optical drive bay
* Four open full-length 64-bit, 33MHz PCI slots
* One AGP 4X slot with graphics card installed
Communications
* 10/100/1000BASE-T Ethernet connector (RJ-45)
* Built-in antennas and card slot for optional 11-Mbps AirPort Card; IEEE 802.11b compliant5
* Built-in 56K V.92 modem6
Peripherals and audio
* Two 400-Mbps FireWire ports7 (15W total power)
* Four USB ports (two on system, two on keyboard)
* Front headphone jack
* Built-in speaker
* Stereo audio line in and line out minijacks
* Apple speaker minijack for connection to optional Apple Pro Speakers
Electrical and environmental requirements
* Meets ENERGY STAR requirements
* Line voltage: 100–125V AC or 200–240V AC
* Frequency: 50Hz to 60Hz, single phase
* Maximum current: 6.5A (low-voltage range) or 7.5A (high-voltage range)
* Operating temperature: 50&def; to 95&def; F (10&def; to 35&def; C)
* Storage temperature: –40&def; to 116&def; F (–40&def; to 47&def; C)
* Relative humidity: 5% to 95% noncondensing
* Maximum altitude: 10,000 feet
Size and weight
* Height: 17.0 inches (43.2 cm)
* Width: 8.9 inches (22.7 cm)
* Depth: 18.4 inches (46.8 cm)
* Weight: 42 pounds (19.1 kg)8
1. Second Apple flat-panel display requires the Apple DVI to ADC Adapter, sold separately.
2. Selected models.
3. 999MB maximum per application in Mac OS 9.
4. 1GB = 1 billion bytes; actual formatted capacity less.
5. Wireless Internet access requires AirPort Card, AirPort Base Station, and Internet access (fees may apply). Some ISPs are not currently compatible with AirPort. Range may vary with site conditions.
6. Appropriate ISP and telephone services required. Your ISP may not support all V.92 features. Modem will function according to V.90 standards if V.92 services are not available. Actual modem speeds lower; speed depends on connection rate and other factors.
7. Actual rates will vary.
8. Weight varies by configuration and manufacturing process.
Home > Support > Specifications > Power Mac G4 (Mirrored Drive Doors)
Home > Support
Visit the Apple Store online (1-800-MY-APPLE), visit a retail location, or find a reseller.
Site Map | Hot News | RSS Feeds | Contact Us
Copyright © 2007 Apple Inc. All rights reserved. Terms of Use | Privacy Policy
The Black Country Living Museum (formerly The Black Country Museum) is an open-air museum of rebuilt historic buildings in Dudley in the West Midlands of England. It is located in the centre of the Black Country, 10 miles west of Birmingham. The museum occupies 105,000 square metres (26 acres) of former industrial land partly reclaimed from a former railway goods yard, disused lime kilns, canal arm and former coal pits.
The museum opened to the public in 1978, and has since added over 50 shops, houses and other industrial buildings from around the Metropolitan Boroughs of Dudley, Sandwell and Walsall and the City of Wolverhampton (collectively known as the Black Country); mainly in a specially built village. Most buildings were relocated from their original sites to form a base from where demonstrators portray life spanning 300 years of history, with a focus on 1850-1950.
The museum is constantly improving as new exhibits, especially buildings, are being added.
The museum is close to the site where Dud Dudley first mastered the technique of smelting iron with coal instead of wood charcoal and making iron enough for industrial use. Having a claim to be "the birthplace of the Industrial Revolution", the Black Country is famous for its wide range of midsteel-based products from nails to the anchor and anchor chain for the Titanic.
The site's coal mining heritage is shown by an underground drift and colliery surface buildings. The museum has a working replica of a Newcomen atmospheric engine which was first successfully put to use in Tipton in 1712. The museum's reconstruction was based on a print engraved by Thomas Barney, filemaker of Wolverhampton, in 1719.
Electric trams and trolleybuses transport visitors from the entrance to the village where thirty domestic and industrial buildings have been relocated close to the canal basin. The museum is one of three in the UK with working trolleybuses. The route to the village passes the Cast Iron Houses and a 1930s fairground. A narrowboat operated by Dudley Canal Trust makes trips on the Dudley Canal and into the Dudley Tunnel
On 16 February 2012, the museum's collection was awarded designated status by Arts Council England (ACE), a mark of distinction celebrating its unique national and international importance.
The museum is run by the Black Country Living Museum Trust, a registered charity under English law.
The Black Country Living Museum (formerly The Black Country Museum) is an open-air museum of rebuilt historic buildings in Dudley in the West Midlands of England. It is located in the centre of the Black Country, 10 miles west of Birmingham. The museum occupies 105,000 square metres (26 acres) of former industrial land partly reclaimed from a former railway goods yard, disused lime kilns, canal arm and former coal pits.
The museum opened to the public in 1978, and has since added over 50 shops, houses and other industrial buildings from around the Metropolitan Boroughs of Dudley, Sandwell and Walsall and the City of Wolverhampton (collectively known as the Black Country); mainly in a specially built village. Most buildings were relocated from their original sites to form a base from where demonstrators portray life spanning 300 years of history, with a focus on 1850-1950.
The museum is constantly improving as new exhibits, especially buildings, are being added.
The museum is close to the site where Dud Dudley first mastered the technique of smelting iron with coal instead of wood charcoal and making iron enough for industrial use. Having a claim to be "the birthplace of the Industrial Revolution", the Black Country is famous for its wide range of midsteel-based products from nails to the anchor and anchor chain for the Titanic.
The site's coal mining heritage is shown by an underground drift and colliery surface buildings. The museum has a working replica of a Newcomen atmospheric engine which was first successfully put to use in Tipton in 1712. The museum's reconstruction was based on a print engraved by Thomas Barney, filemaker of Wolverhampton, in 1719.
Electric trams and trolleybuses transport visitors from the entrance to the village where thirty domestic and industrial buildings have been relocated close to the canal basin. The museum is one of three in the UK with working trolleybuses. The route to the village passes the Cast Iron Houses and a 1930s fairground. A narrowboat operated by Dudley Canal Trust makes trips on the Dudley Canal and into the Dudley Tunnel
On 16 February 2012, the museum's collection was awarded designated status by Arts Council England (ACE), a mark of distinction celebrating its unique national and international importance.
The museum is run by the Black Country Living Museum Trust, a registered charity under English law.
The Black Country Living Museum (formerly The Black Country Museum) is an open-air museum of rebuilt historic buildings in Dudley in the West Midlands of England. It is located in the centre of the Black Country, 10 miles west of Birmingham. The museum occupies 105,000 square metres (26 acres) of former industrial land partly reclaimed from a former railway goods yard, disused lime kilns, canal arm and former coal pits.
The museum opened to the public in 1978, and has since added over 50 shops, houses and other industrial buildings from around the Metropolitan Boroughs of Dudley, Sandwell and Walsall and the City of Wolverhampton (collectively known as the Black Country); mainly in a specially built village. Most buildings were relocated from their original sites to form a base from where demonstrators portray life spanning 300 years of history, with a focus on 1850-1950.
The museum is constantly improving as new exhibits, especially buildings, are being added.
The museum is close to the site where Dud Dudley first mastered the technique of smelting iron with coal instead of wood charcoal and making iron enough for industrial use. Having a claim to be "the birthplace of the Industrial Revolution", the Black Country is famous for its wide range of midsteel-based products from nails to the anchor and anchor chain for the Titanic.
The site's coal mining heritage is shown by an underground drift and colliery surface buildings. The museum has a working replica of a Newcomen atmospheric engine which was first successfully put to use in Tipton in 1712. The museum's reconstruction was based on a print engraved by Thomas Barney, filemaker of Wolverhampton, in 1719.
Electric trams and trolleybuses transport visitors from the entrance to the village where thirty domestic and industrial buildings have been relocated close to the canal basin. The museum is one of three in the UK with working trolleybuses. The route to the village passes the Cast Iron Houses and a 1930s fairground. A narrowboat operated by Dudley Canal Trust makes trips on the Dudley Canal and into the Dudley Tunnel
On 16 February 2012, the museum's collection was awarded designated status by Arts Council England (ACE), a mark of distinction celebrating its unique national and international importance.
The museum is run by the Black Country Living Museum Trust, a registered charity under English law.
The Black Country Living Museum (formerly The Black Country Museum) is an open-air museum of rebuilt historic buildings in Dudley in the West Midlands of England. It is located in the centre of the Black Country, 10 miles west of Birmingham. The museum occupies 105,000 square metres (26 acres) of former industrial land partly reclaimed from a former railway goods yard, disused lime kilns, canal arm and former coal pits.
The museum opened to the public in 1978, and has since added over 50 shops, houses and other industrial buildings from around the Metropolitan Boroughs of Dudley, Sandwell and Walsall and the City of Wolverhampton (collectively known as the Black Country); mainly in a specially built village. Most buildings were relocated from their original sites to form a base from where demonstrators portray life spanning 300 years of history, with a focus on 1850-1950.
The museum is constantly improving as new exhibits, especially buildings, are being added.
The museum is close to the site where Dud Dudley first mastered the technique of smelting iron with coal instead of wood charcoal and making iron enough for industrial use. Having a claim to be "the birthplace of the Industrial Revolution", the Black Country is famous for its wide range of midsteel-based products from nails to the anchor and anchor chain for the Titanic.
The site's coal mining heritage is shown by an underground drift and colliery surface buildings. The museum has a working replica of a Newcomen atmospheric engine which was first successfully put to use in Tipton in 1712. The museum's reconstruction was based on a print engraved by Thomas Barney, filemaker of Wolverhampton, in 1719.
Electric trams and trolleybuses transport visitors from the entrance to the village where thirty domestic and industrial buildings have been relocated close to the canal basin. The museum is one of three in the UK with working trolleybuses. The route to the village passes the Cast Iron Houses and a 1930s fairground. A narrowboat operated by Dudley Canal Trust makes trips on the Dudley Canal and into the Dudley Tunnel
On 16 February 2012, the museum's collection was awarded designated status by Arts Council England (ACE), a mark of distinction celebrating its unique national and international importance.
The museum is run by the Black Country Living Museum Trust, a registered charity under English law.
The Black Country Living Museum (formerly The Black Country Museum) is an open-air museum of rebuilt historic buildings in Dudley in the West Midlands of England. It is located in the centre of the Black Country, 10 miles west of Birmingham. The museum occupies 105,000 square metres (26 acres) of former industrial land partly reclaimed from a former railway goods yard, disused lime kilns, canal arm and former coal pits.
The museum opened to the public in 1978, and has since added over 50 shops, houses and other industrial buildings from around the Metropolitan Boroughs of Dudley, Sandwell and Walsall and the City of Wolverhampton (collectively known as the Black Country); mainly in a specially built village. Most buildings were relocated from their original sites to form a base from where demonstrators portray life spanning 300 years of history, with a focus on 1850-1950.
The museum is constantly improving as new exhibits, especially buildings, are being added.
The museum is close to the site where Dud Dudley first mastered the technique of smelting iron with coal instead of wood charcoal and making iron enough for industrial use. Having a claim to be "the birthplace of the Industrial Revolution", the Black Country is famous for its wide range of midsteel-based products from nails to the anchor and anchor chain for the Titanic.
The site's coal mining heritage is shown by an underground drift and colliery surface buildings. The museum has a working replica of a Newcomen atmospheric engine which was first successfully put to use in Tipton in 1712. The museum's reconstruction was based on a print engraved by Thomas Barney, filemaker of Wolverhampton, in 1719.
Electric trams and trolleybuses transport visitors from the entrance to the village where thirty domestic and industrial buildings have been relocated close to the canal basin. The museum is one of three in the UK with working trolleybuses. The route to the village passes the Cast Iron Houses and a 1930s fairground. A narrowboat operated by Dudley Canal Trust makes trips on the Dudley Canal and into the Dudley Tunnel
On 16 February 2012, the museum's collection was awarded designated status by Arts Council England (ACE), a mark of distinction celebrating its unique national and international importance.
The museum is run by the Black Country Living Museum Trust, a registered charity under English law.
The Black Country Living Museum (formerly The Black Country Museum) is an open-air museum of rebuilt historic buildings in Dudley in the West Midlands of England. It is located in the centre of the Black Country, 10 miles west of Birmingham. The museum occupies 105,000 square metres (26 acres) of former industrial land partly reclaimed from a former railway goods yard, disused lime kilns, canal arm and former coal pits.
The museum opened to the public in 1978, and has since added over 50 shops, houses and other industrial buildings from around the Metropolitan Boroughs of Dudley, Sandwell and Walsall and the City of Wolverhampton (collectively known as the Black Country); mainly in a specially built village. Most buildings were relocated from their original sites to form a base from where demonstrators portray life spanning 300 years of history, with a focus on 1850-1950.
The museum is constantly improving as new exhibits, especially buildings, are being added.
The museum is close to the site where Dud Dudley first mastered the technique of smelting iron with coal instead of wood charcoal and making iron enough for industrial use.
Having a claim to be "the birthplace of the Industrial Revolution", the Black Country is famous for its wide range of midsteel-based products from nails to the anchor and anchor chain for the Titanic.
The site's coal mining heritage is shown by an underground drift and colliery surface buildings. The museum has a working replica of a Newcomen atmospheric engine which was first successfully put to use in Tipton in 1712. The museum's reconstruction was based on a print engraved by Thomas Barney, filemaker of Wolverhampton, in 1719.
Electric trams and trolleybuses transport visitors from the entrance to the village where thirty domestic and industrial buildings have been relocated close to the canal basin. The museum is one of three in the UK with working trolleybuses.
The route to the village passes the Cast Iron Houses and a 1930s fairground. A narrowboat operated by Dudley Canal Trust makes trips on the Dudley Canal and into the Dudley Tunnel
On 16 February 2012, the museum's collection was awarded designated status by Arts Council England (ACE), a mark of distinction celebrating its unique national and international importance.
The museum is run by the Black Country Living Museum Trust, a registered charity under English law.
The Black Country Living Museum (formerly The Black Country Museum) is an open-air museum of rebuilt historic buildings in Dudley in the West Midlands of England. It is located in the centre of the Black Country, 10 miles west of Birmingham. The museum occupies 105,000 square metres (26 acres) of former industrial land partly reclaimed from a former railway goods yard, disused lime kilns, canal arm and former coal pits.
The museum opened to the public in 1978, and has since added over 50 shops, houses and other industrial buildings from around the Metropolitan Boroughs of Dudley, Sandwell and Walsall and the City of Wolverhampton (collectively known as the Black Country); mainly in a specially built village. Most buildings were relocated from their original sites to form a base from where demonstrators portray life spanning 300 years of history, with a focus on 1850-1950.
The museum is constantly improving as new exhibits, especially buildings, are being added.
The museum is close to the site where Dud Dudley first mastered the technique of smelting iron with coal instead of wood charcoal and making iron enough for industrial use. Having a claim to be "the birthplace of the Industrial Revolution", the Black Country is famous for its wide range of midsteel-based products from nails to the anchor and anchor chain for the Titanic.
The site's coal mining heritage is shown by an underground drift and colliery surface buildings. The museum has a working replica of a Newcomen atmospheric engine which was first successfully put to use in Tipton in 1712. The museum's reconstruction was based on a print engraved by Thomas Barney, filemaker of Wolverhampton, in 1719.
Electric trams and trolleybuses transport visitors from the entrance to the village where thirty domestic and industrial buildings have been relocated close to the canal basin. The museum is one of three in the UK with working trolleybuses. The route to the village passes the Cast Iron Houses and a 1930s fairground. A narrowboat operated by Dudley Canal Trust makes trips on the Dudley Canal and into the Dudley Tunnel
On 16 February 2012, the museum's collection was awarded designated status by Arts Council England (ACE), a mark of distinction celebrating its unique national and international importance.
The museum is run by the Black Country Living Museum Trust, a registered charity under English law.
The Black Country Living Museum (formerly The Black Country Museum) is an open-air museum of rebuilt historic buildings in Dudley in the West Midlands of England. It is located in the centre of the Black Country, 10 miles west of Birmingham. The museum occupies 105,000 square metres (26 acres) of former industrial land partly reclaimed from a former railway goods yard, disused lime kilns, canal arm and former coal pits.
The museum opened to the public in 1978, and has since added over 50 shops, houses and other industrial buildings from around the Metropolitan Boroughs of Dudley, Sandwell and Walsall and the City of Wolverhampton (collectively known as the Black Country); mainly in a specially built village. Most buildings were relocated from their original sites to form a base from where demonstrators portray life spanning 300 years of history, with a focus on 1850-1950.
The museum is constantly improving as new exhibits, especially buildings, are being added.
The museum is close to the site where Dud Dudley first mastered the technique of smelting iron with coal instead of wood charcoal and making iron enough for industrial use. Having a claim to be "the birthplace of the Industrial Revolution", the Black Country is famous for its wide range of midsteel-based products from nails to the anchor and anchor chain for the Titanic.
The site's coal mining heritage is shown by an underground drift and colliery surface buildings. The museum has a working replica of a Newcomen atmospheric engine which was first successfully put to use in Tipton in 1712. The museum's reconstruction was based on a print engraved by Thomas Barney, filemaker of Wolverhampton, in 1719.
Electric trams and trolleybuses transport visitors from the entrance to the village where thirty domestic and industrial buildings have been relocated close to the canal basin. The museum is one of three in the UK with working trolleybuses. The route to the village passes the Cast Iron Houses and a 1930s fairground. A narrowboat operated by Dudley Canal Trust makes trips on the Dudley Canal and into the Dudley Tunnel
On 16 February 2012, the museum's collection was awarded designated status by Arts Council England (ACE), a mark of distinction celebrating its unique national and international importance.
The museum is run by the Black Country Living Museum Trust, a registered charity under English law.
The Black Country Living Museum (formerly The Black Country Museum) is an open-air museum of rebuilt historic buildings in Dudley in the West Midlands of England. It is located in the centre of the Black Country, 10 miles west of Birmingham. The museum occupies 105,000 square metres (26 acres) of former industrial land partly reclaimed from a former railway goods yard, disused lime kilns, canal arm and former coal pits.
The museum opened to the public in 1978, and has since added over 50 shops, houses and other industrial buildings from around the Metropolitan Boroughs of Dudley, Sandwell and Walsall and the City of Wolverhampton (collectively known as the Black Country); mainly in a specially built village. Most buildings were relocated from their original sites to form a base from where demonstrators portray life spanning 300 years of history, with a focus on 1850-1950.
The museum is constantly improving as new exhibits, especially buildings, are being added.
The museum is close to the site where Dud Dudley first mastered the technique of smelting iron with coal instead of wood charcoal and making iron enough for industrial use. Having a claim to be "the birthplace of the Industrial Revolution", the Black Country is famous for its wide range of midsteel-based products from nails to the anchor and anchor chain for the Titanic.
The site's coal mining heritage is shown by an underground drift and colliery surface buildings. The museum has a working replica of a Newcomen atmospheric engine which was first successfully put to use in Tipton in 1712. The museum's reconstruction was based on a print engraved by Thomas Barney, filemaker of Wolverhampton, in 1719.
Electric trams and trolleybuses transport visitors from the entrance to the village where thirty domestic and industrial buildings have been relocated close to the canal basin. The museum is one of three in the UK with working trolleybuses. The route to the village passes the Cast Iron Houses and a 1930s fairground. A narrowboat operated by Dudley Canal Trust makes trips on the Dudley Canal and into the Dudley Tunnel
On 16 February 2012, the museum's collection was awarded designated status by Arts Council England (ACE), a mark of distinction celebrating its unique national and international importance.
The museum is run by the Black Country Living Museum Trust, a registered charity under English law.
The Black Country Living Museum (formerly The Black Country Museum) is an open-air museum of rebuilt historic buildings in Dudley in the West Midlands of England. It is located in the centre of the Black Country, 10 miles west of Birmingham. The museum occupies 105,000 square metres (26 acres) of former industrial land partly reclaimed from a former railway goods yard, disused lime kilns, canal arm and former coal pits.
The museum opened to the public in 1978, and has since added over 50 shops, houses and other industrial buildings from around the Metropolitan Boroughs of Dudley, Sandwell and Walsall and the City of Wolverhampton (collectively known as the Black Country); mainly in a specially built village. Most buildings were relocated from their original sites to form a base from where demonstrators portray life spanning 300 years of history, with a focus on 1850-1950.
The museum is constantly improving as new exhibits, especially buildings, are being added.
The museum is close to the site where Dud Dudley first mastered the technique of smelting iron with coal instead of wood charcoal and making iron enough for industrial use. Having a claim to be "the birthplace of the Industrial Revolution", the Black Country is famous for its wide range of midsteel-based products from nails to the anchor and anchor chain for the Titanic.
The site's coal mining heritage is shown by an underground drift and colliery surface buildings. The museum has a working replica of a Newcomen atmospheric engine which was first successfully put to use in Tipton in 1712. The museum's reconstruction was based on a print engraved by Thomas Barney, filemaker of Wolverhampton, in 1719.
Electric trams and trolleybuses transport visitors from the entrance to the village where thirty domestic and industrial buildings have been relocated close to the canal basin. The museum is one of three in the UK with working trolleybuses. The route to the village passes the Cast Iron Houses and a 1930s fairground. A narrowboat operated by Dudley Canal Trust makes trips on the Dudley Canal and into the Dudley Tunnel
On 16 February 2012, the museum's collection was awarded designated status by Arts Council England (ACE), a mark of distinction celebrating its unique national and international importance.
The museum is run by the Black Country Living Museum Trust, a registered charity under English law.
How to Duplicate Modules or Layouts in FileMaker or FM Starting Point FMSP | FileMaker Pro 15 News | FileMaker Pro 15 Videos | FileMaker 15 Training Get up to speed with the FileMaker Pro 15 Video Training Course! Top Rated Course by FileMaker Expert, Richard Carlton. learningfilemaker.com/fmpro15.php Experience Richard's dynamic and exciting teaching format, while learning both basic, intermediate, and advanced FileMaker development skills. With 26 years of FileMaker experience and a long time speaker at FileMaker's Developer Conference,Richard will teach you all the ins and outs of building FileMaker Solutions. The course is 40 hours of video content! Richard has been involved with the FileMaker platform since 1990 and has grown RCC into one of the largest top tier FileMaker consultancies worldwide. Richard works closely with RCC's staff: a team of 28 FileMaker developers and supporting web designers. He has offices in California, Nevada, and Texas. Richard has been a frequent speaker at the FileMaker Developers Conference on a variety of topics involving FileMaker for Startups and Entrepreneurs, and client server integration. Richard is the Product Manager for FM Starting Point, the popular and most downloaded free FileMaker CRM Starter Solution. Richard won 2015 Excellence Award from FileMaker Inc (Apple Inc) for outstanding video and product creation, leading to business development. RCC and LearningFileMaker.com are headquartered in Santa Clara, CA. www.rcconsulting.com/ Please feel free to contact us at support@rcconsulting.com If you want to explore building I.O.S apps for I Phone or I Pad and deploying those out to the Apple App Store. Here is a video introduction to our iOS App Training www.youtube.com/watch?v=cVxQe_yAshw Looking for FM Starting Point free software download: www.fmstartingpoint.com For More Free FileMaker Videos Check out www.filemakerfree.com Visit www.learningfilemaker.com for all facets of FileMaker Award Winning Video Training. Please Visit Our Channel: www.youtube.com/user/FileMakerVideos Please Subscribe While There. Please Comment, Like & Share All of Our Videos. Feel Free to Embed any of Our Videos on Your Blog or Website. Follow Us on Your Favorite Social Media www.facebook.com/FileMakerVideos twitter.com/filemakervideos plus.google.com/+FileMakerVideos/videos Filemaker Pro 15 Training Videos FileMaker 15 Videos Filemaker Pro 15 Video Course #WhatisFilemaker15 #FilemakerPro15Training #Filemaker15VideoTutorial #FilemakerPro15Videos
The Black Country Living Museum (formerly The Black Country Museum) is an open-air museum of rebuilt historic buildings in Dudley in the West Midlands of England. It is located in the centre of the Black Country, 10 miles west of Birmingham. The museum occupies 105,000 square metres (26 acres) of former industrial land partly reclaimed from a former railway goods yard, disused lime kilns, canal arm and former coal pits.
The museum opened to the public in 1978, and has since added over 50 shops, houses and other industrial buildings from around the Metropolitan Boroughs of Dudley, Sandwell and Walsall and the City of Wolverhampton (collectively known as the Black Country); mainly in a specially built village. Most buildings were relocated from their original sites to form a base from where demonstrators portray life spanning 300 years of history, with a focus on 1850-1950.
The museum is constantly improving as new exhibits, especially buildings, are being added.
The museum is close to the site where Dud Dudley first mastered the technique of smelting iron with coal instead of wood charcoal and making iron enough for industrial use.
Having a claim to be "the birthplace of the Industrial Revolution", the Black Country is famous for its wide range of midsteel-based products from nails to the anchor and anchor chain for the Titanic.
The site's coal mining heritage is shown by an underground drift and colliery surface buildings. The museum has a working replica of a Newcomen atmospheric engine which was first successfully put to use in Tipton in 1712. The museum's reconstruction was based on a print engraved by Thomas Barney, filemaker of Wolverhampton, in 1719.
Electric trams and trolleybuses transport visitors from the entrance to the village where thirty domestic and industrial buildings have been relocated close to the canal basin. The museum is one of three in the UK with working trolleybuses.
The route to the village passes the Cast Iron Houses and a 1930s fairground. A narrowboat operated by Dudley Canal Trust makes trips on the Dudley Canal and into the Dudley Tunnel
On 16 February 2012, the museum's collection was awarded designated status by Arts Council England (ACE), a mark of distinction celebrating its unique national and international importance.
The museum is run by the Black Country Living Museum Trust, a registered charity under English law.
The Black Country Living Museum (formerly The Black Country Museum) is an open-air museum of rebuilt historic buildings in Dudley in the West Midlands of England. It is located in the centre of the Black Country, 10 miles west of Birmingham. The museum occupies 105,000 square metres (26 acres) of former industrial land partly reclaimed from a former railway goods yard, disused lime kilns, canal arm and former coal pits.
The museum opened to the public in 1978, and has since added over 50 shops, houses and other industrial buildings from around the Metropolitan Boroughs of Dudley, Sandwell and Walsall and the City of Wolverhampton (collectively known as the Black Country); mainly in a specially built village. Most buildings were relocated from their original sites to form a base from where demonstrators portray life spanning 300 years of history, with a focus on 1850-1950.
The museum is constantly improving as new exhibits, especially buildings, are being added.
The museum is close to the site where Dud Dudley first mastered the technique of smelting iron with coal instead of wood charcoal and making iron enough for industrial use. Having a claim to be "the birthplace of the Industrial Revolution", the Black Country is famous for its wide range of midsteel-based products from nails to the anchor and anchor chain for the Titanic.
The site's coal mining heritage is shown by an underground drift and colliery surface buildings. The museum has a working replica of a Newcomen atmospheric engine which was first successfully put to use in Tipton in 1712. The museum's reconstruction was based on a print engraved by Thomas Barney, filemaker of Wolverhampton, in 1719.
Electric trams and trolleybuses transport visitors from the entrance to the village where thirty domestic and industrial buildings have been relocated close to the canal basin. The museum is one of three in the UK with working trolleybuses. The route to the village passes the Cast Iron Houses and a 1930s fairground. A narrowboat operated by Dudley Canal Trust makes trips on the Dudley Canal and into the Dudley Tunnel
On 16 February 2012, the museum's collection was awarded designated status by Arts Council England (ACE), a mark of distinction celebrating its unique national and international importance.
The museum is run by the Black Country Living Museum Trust, a registered charity under English law.
How to Duplicate Modules or Layouts in FileMaker or FM Starting Point FMSP | FileMaker Pro 15 News | FileMaker Pro 15 Videos | FileMaker 15 Training Get up to speed with the FileMaker Pro 15 Video Training Course! Top Rated Course by FileMaker Expert, Richard Carlton. learningfilemaker.com/fmpro15.php Experience Richard's dynamic and exciting teaching format, while learning both basic, intermediate, and advanced FileMaker development skills. With 26 years of FileMaker experience and a long time speaker at FileMaker's Developer Conference,Richard will teach you all the ins and outs of building FileMaker Solutions. The course is 40 hours of video content! Richard has been involved with the FileMaker platform since 1990 and has grown RCC into one of the largest top tier FileMaker consultancies worldwide. Richard works closely with RCC's staff: a team of 28 FileMaker developers and supporting web designers. He has offices in California, Nevada, and Texas. Richard has been a frequent speaker at the FileMaker Developers Conference on a variety of topics involving FileMaker for Startups and Entrepreneurs, and client server integration. Richard is the Product Manager for FM Starting Point, the popular and most downloaded free FileMaker CRM Starter Solution. Richard won 2015 Excellence Award from FileMaker Inc (Apple Inc) for outstanding video and product creation, leading to business development. RCC and LearningFileMaker.com are headquartered in Santa Clara, CA. www.rcconsulting.com/ Please feel free to contact us at support@rcconsulting.com If you want to explore building I.O.S apps for I Phone or I Pad and deploying those out to the Apple App Store. Here is a video introduction to our iOS App Training www.youtube.com/watch?v=cVxQe_yAshw Looking for FM Starting Point free software download: www.fmstartingpoint.com For More Free FileMaker Videos Check out www.filemakerfree.com Visit www.learningfilemaker.com for all facets of FileMaker Award Winning Video Training. Please Visit Our Channel: www.youtube.com/user/FileMakerVideos Please Subscribe While There. Please Comment, Like & Share All of Our Videos. Feel Free to Embed any of Our Videos on Your Blog or Website. Follow Us on Your Favorite Social Media www.facebook.com/FileMakerVideos twitter.com/filemakervideos plus.google.com/+FileMakerVideos/videos Filemaker Pro 15 Training Videos FileMaker 15 Videos Filemaker Pro 15 Video Course #WhatisFilemaker15 #FilemakerPro15Training #Filemaker15VideoTutorial #FilemakerPro15Videos