View allAll Photos Tagged Deflectors
Quoting Smithsonian National Air and Space Museum | Vought OS2U-3 Kingfisher:
The Kingfisher was the U.S. Navy's primary ship-based, scout and observation aircraft during World War II. Revolutionary spot welding techniques gave it a smooth, non-buckling fuselage structure. Deflector plate flaps that hung from the wing's trailing edge and spoiler-augmented ailerons functioned like extra flaps to allow slower landing speeds. Most OS2Us operated in the Pacific, where they rescued many downed airmen, including World War I ace Eddie Rickenbacker and the crew of his B-17 Flying Fortress.
In March 1942, this airplane was assigned to the battleship USS Indiana. It later underwent a six-month overhaul in California, returned to Pearl Harbor, and rejoined the Indiana in March 1944. Lt. j.g. Rollin M. Batten Jr. was awarded the Navy Cross for making a daring rescue in this airplane under heavy enemy fire on July 4, 1944.
Transferred from the United States Navy.
Manufacturer:
Vought-Sikorsky Aircraft Division
Date:
1937
Country of Origin:
United States of America
Dimensions:
Overall: 15ft 1 1/8in. x 33ft 9 1/2in., 4122.6lb., 36ft 1 1/16in. (460 x 1030cm, 1870kg, 1100cm)
Materials:
Wings covered with fabric aft of the main spar
Physical Description:
Two-seat monoplane, deflector plate flaps hung from the trailing edge of the wing, ailerons drooped at low airspeeds to function like extra flaps, spoilers.
• • • • •
Quoting Smithsonian National Air and Space Museum | Boeing B-29 Superfortress "Enola Gay":
Boeing's B-29 Superfortress was the most sophisticated propeller-driven bomber of World War II and the first bomber to house its crew in pressurized compartments. Although designed to fight in the European theater, the B-29 found its niche on the other side of the globe. In the Pacific, B-29s delivered a variety of aerial weapons: conventional bombs, incendiary bombs, mines, and two nuclear weapons.
On August 6, 1945, this Martin-built B-29-45-MO dropped the first atomic weapon used in combat on Hiroshima, Japan. Three days later, Bockscar (on display at the U.S. Air Force Museum near Dayton, Ohio) dropped a second atomic bomb on Nagasaki, Japan. Enola Gay flew as the advance weather reconnaissance aircraft that day. A third B-29, The Great Artiste, flew as an observation aircraft on both missions.
Transferred from the United States Air Force.
Manufacturer:
Date:
1945
Country of Origin:
United States of America
Dimensions:
Overall: 900 x 3020cm, 32580kg, 4300cm (29ft 6 5/16in. x 99ft 1in., 71825.9lb., 141ft 15/16in.)
Materials:
Polished overall aluminum finish
Physical Description:
Four-engine heavy bomber with semi-monoqoque fuselage and high-aspect ratio wings. Polished aluminum finish overall, standard late-World War II Army Air Forces insignia on wings and aft fuselage and serial number on vertical fin; 509th Composite Group markings painted in black; "Enola Gay" in black, block letters on lower left nose.
At Launch Pad 39B at NASA's Kennedy Space Center in Florida, cranes lower large segments of the support hardware for a new flame deflector into place in the flame trench. Construction workers weld the structures together. The new flame deflector will be positioned about six feet south of the shuttle-era flame deflector’s position. During liftoff of NASA’s Space Launch System, the rocket’s flame and energy will be diverted to the north side of the flame trench. The north side of the deflector will be protected by a NASA standard coating. The south side of the deflector will not be slanted and will have no lining. The new design will provide easier access for inspection, maintenance and repair. The Ground Systems Development and Operations (GSDO) Program at Kennedy is managing the installation of the flame deflector for Exploration Mission 1, deep space missions, and NASA's Journey to Mars. Photo credit: NASA/Kim Shiflett
@ The Dog & Pony Show ~ Sept. 29 - Oct. 23
A sort of armor for the scouting companion of a primal hunter. It may not be the most efficient at deflecting blows, but at the very least, it's emergency rations for caveman's best friend.
These bone pieces are for Teeglepet Dogs only! They are fitted to the following dogs:
• Mutt
• Labrador
• German Shepherd
• Wolf
Two colors are included per size: Aged bone and Black bone. The headpiece and backpieces are separate objects so you can add or remove them with ease.
To use, simply rez alongside your Teegle dog and link them together. This WILL raise the land impact for the animesh dog, doubling the land cost, so it is best to use these bones on a dog you intend to wear. Unless of course you have the land impact to spare!
Mod / Copy / No Trans
More from me ♥
Copyright © John G. Lidstone, all rights reserved.
You are warned: DO NOT STEAL or RE-POST THIS PHOTO.
It is an offence under law if you remove my copyright marking, or post this image anywhere else without my express written permission.
If you do, and I find out, you WILL be reported for copyright infringement action to the host platform and/or group applicable.
The same applies to all of my images.
My copyright is also embedded in the image metadata.
Winterthur, Switzerland, January 2011
Elinchrom Quadra RX. Quadra A head, camera left, with 70cm bare Deep Octa (just a deflector, no baffles). This was my first real outing with Quadras. Must admit I enjoy using them more and more.
• NIKON D700 • ¹⁄₂₅₀ sec at f/4.5 (0 EV) • ISO 200 • Pattern metering • Manual • no flash • 70-200 mm f/2.8 @ 200 mm •
• NIKON D700 // AF-S Nikkor 70-200mm f/2.8G ED VR II at 200 mm (VR Off) // Exposure - 1/250 @ f/4.5 (0EV), ISO 200 // Multi-segment metering, Manual exposure // White Balance - 5560K // AF - On, AF-C, Dynamic Area (9 points), Primary AF Point - C11, Used AF Point - C11 // Shooting Mode - Single-Frame // FOV - 10.1 deg (2.10 m), Focus Distance - 11.89 m, DOF - 0.94 m (11.43 - 12.37), Hyperfocal - 295.84 m // Nikon NEF Compressed, 14bit, Adobe RGB •
2011-01-16-0120-4130
Please do not use this image on websites, blogs or other media without my explicit permission.
Copyright © 2011 yOOrek
Bernice In B/W
Hans van Eijsden Photography, The Netherlands
Lens: Canon EF 85mm f/1.2L II USM on full frame.
Light: Simple setup with one Elinchrom ELB 400 + Action Head through a Deep Octa with silver deflector and inner diffuser from the front-side, light from the back is ambient light. I lowered the power with the Elinchrom Skyport HS trigger, so I could open the lens almost completely.
Postprocessing: Some local adjustment curves, BW conversion, grain.
Portfolio: www.hansvaneijsden.com
Facebook Page: www.facebook.com/hansvaneijsdenphotography
Fleet No.: F18
Reg. No.: BVT 417
Manufacturer: Daewoo Bus Corp.
Model: BH117H "Royal Cruistar"
Engine: Daewoo DE12Tis
*Specifications are subjected for verification and may be changed without prior notice.
Light Class All Purpose Starfighter.
Armament :
Twin Proton Cannons
Twin Laser Cannons
Deflector Shields
Hyperdrive Class 1.5
I think that Maisie measures how much she likes her clothes on some sort of spinning scale. This outfit was actually bought for the wedding that we attended a couple of weeks ago and she was wearing it for my Week 18 photograph. It must be a favourite though as she is wearing it to a friend's birthday party this afternoon. Happy Birthday Sofia.
It's been a while since I produced anything from the studio so it was nice to be able to get back in there for a play. I'm not sure who was enjoying it more!
Strobist:
Ranger A Head, B port at 5.0, 70cm white maxisoft with silver deflector and sock, above camera.
Ranger Quadra A Head, A port at 4.0, 135 Midi Octa with both diffusers, camera left.
Ranger Quadra A Head, B port at 2.8, 130x50 strip with both diffusers, rear camera left
Ranger Quadra A Head, B port at 2.8, 130x50 strip with both diffusers, rear camera right
RX600, 3.0, 21cm reflector and barn doors, rear camera left to light white background.
RX600, 3.0, 21cm reflector and barn doors, rear camera right to light white background.
Triggered by Skyport Speed.
An unidentified Saturn V S-IC stage undergoing static test firing in the B-1/B-2 test stand, Mississippi Test Facility (MTF), 1967.
Based on the year, and if the (online) content of “Saturn Illustrated Chronology” for that year
history.nasa.gov/MHR-5/part-8.htm
is comprehensive, then (if I’m reading it correctly) it’s either S-IC-T, S-IC-4 (Apollo 9) or S-IC-5 (Apollo 10).
Very interesting photographic history of the test stand:
crgis.ndc.nasa.gov/historic/B-1/B-2_Test_Stand
Excellent F-1 reading:
www.thespacereview.com/article/3724/1
Credit: The Space Review website
"Buzz has reached the bottom rung of the ladder and is about the jump down to the footpad. As he said at the moment Neil took this picture, "Okay. I'm going to leave that one foot up there and both hands down to about the fourth rung up." The thermal shroud protecting the U.S. flag that Neil and Buzz deploy during the EVA can be seen on the underside of the lefthand ladder rail. See, also, NASA photo S69-38755,
www.hq.nasa.gov/alsj/mccraw.gif
which shows the flag on a LM mockup in Houston."
www.hq.nasa.gov/alsj/a11/AS11-40-5868.jpg
All above credit the ALSJ.
Also:
"Astronaut Edwin E. Aldrin Jr., lunar module pilot, descends the steps of the Lunar Module (LM) ladder as he prepares to walk on the moon. He had just egressed the LM. This photograph was taken by astronaut Neil A. Armstrong, commander, with a 70mm lunar surface camera during the Apollo 11 extravehicular activity (EVA). While Armstrong and Aldrin descended in the LM "Eagle" to explore the moon, astronaut Michael Collins, command module pilot, remained with the Command and Service Modules (CSM) in lunar orbit."
Closeup with reflection on black acrylic
Strobist Info:
Single Canon 580EX II at 1/2 power in Westcott RapidBox Strip with a deflector plate and egg crate grid, camera right, overhead.
Yongnuo YN622C-TX trigger and Yongnuo YN622C receiver.
The M-Wing was a ship famous for its heavy armor and weaponry. However, when deflector shields came into use on small ships it was rendered obsolete. Yet now a shadowy mechanic has switched out the clunky armor for newer deflector shields, creating one of the most deadly ships in the galaxy.
After a day of hard work I took Sera Yosta, my most beautiful lens and my Elinchrom light outside to the streets of Amsterdam, just to see what light can do. The temperature was quite high here in The Netherlands, 14 degrees Celcius in mid-december! So, the perfect moment to make some simple clicks.
As light I used the ELB400 & Elinchrom Deep Octa with translucent deflector and inner diffuser.
Lens: Canon EF 85mm f/1.2L II USM on full frame.
Hans van Eijsden Photography, The Netherlands
Postprocessing: Some local adjustment curves.
Portfolio: www.hansvaneijsden.com
Facebook Page: www.facebook.com/hansvaneijsdenphotography
Hans van Eijsden Photography, The Netherlands
Model: Kristel de Sera
Lens: Canon EF 85mm f/1.2L II USM on full frame.
Light: An Elinchrom ELB 400 with one HS head as key light from the front into an Elinchrom Deep Octa with silver deflector and with inner diffusor, triggered via the Skyport Plus HS. Light from the back is ambient light.
Postprocessing: Some local adjustment curves, some local cloning, greyscale conversion, toning, added grain.
Portfolio: www.hansvaneijsden.com
Facebook Page: www.facebook.com/hansvaneijsdenphotography
Complete with accessory side window wind deflector and rear window wind deflector, but apparently not a fuel cap. Modern Regularity Mallala
Name: Trix-E
Species: Mechanoid
Homewrold: Gigathon 7
Height: 5'6"
Weight: 387lbs
Exposed studs on model: 13
823 Pieces
Version: Final
Trix-E is a mechanoid (living robot being) from the Gigathonian cluster of planets. She has a cheerful and mildly sporty personality and is able to make friends easily. She enjoys aerobic activity and shopping for stylish armor mods and enhancements. Her career is in the (not-so)glamorous world of retail selling a variety of goods that robotic citizens need for their every day lives. She has a sister named Mag-E who is a weapons fanatic that she shares an apartment with. They get along well for the most part but can come to a squabble over conflict of interests, fashion, or hobbies.
On her back are a pair of omni-direction twin jetpacks. They are her most expensive upgrade that she had been saving credits for years to buy. They allow her to fly and hover short distances, making her the envy of her peers and eligible for certain athletic groups such as high tier aero gymnastics and hyper lacross. The second modification she purchased were the twin plasma blasters she wears on her wrists. A valuable self defense weapon for young lady bots like her, but she mostly wears them for looks.
Beneath her armor lies the many advanced mechanisms and circuits that compose a citizen of the Gigathonian cluster. Some of the intricate moving parts are fragile, yet easily replaced if damaged. Her bodies construction would equate to Earth technology about a century or two from the present. Her anatomy vaguely resembles that of a human, with some organs mirroring our own albeit in a much more cybernetic way with the visible part of her core showing in the base of her neck. Her equivalent of a blood stream would be her oil and coolant systems. She uses liquid cooling throughout her body with passive radiators in key locations like the back of her head, upper arms, and inner thighs. The harder she’s working the more heat flows from these vents. Like other similar mechanoids, she must undergo regular maintenance in order to retain peak functionality, similar to hygiene in humans. Gigathonians are able to detach limbs and open body panels to a certain degree with only mild discomfort. This helps when doing repairs or upgrades.
Her lower arms have compartments that the hands can retract into from which she can deploy an assortment of items, almost comical in scale from simple tools to weapons. The repulsor nodes on her shoulders are useful for deflecting lifes many jostles and bumps and aide her in mobility. Her shoulders contain maintenance panels filled with useful information and widgets. Her feet also contain repulsor nodules on the bottoms and backs of the heels to assist in maneuverability.
Southern Strobist Club meet 18th April 2010 @ California Barn, Swanage, UK
Model - Emma Sutton
MUA's Racheal Platt ,Nicola Redman , Kristie Moles
Big thanks to Lotty for supplying all the wonderfull clothes.
Nikon D300 (manual, Srgb) iso 200 f/5.6 1/250th
Lens Nikon 24-70mm f/2.8 (DX=62mm (FX=93mm))
Elinchrom Quadra fitted with a 1m Rotalux softbox with diffuser
as main key light to right of model. power adjusted to achieve
an f/5.6 stop. Rotalux also fitted with Gold deflector
SB-800 set behind model within the barn and gridded to give a slight hair light
Lastolite Tri-Flip with sunfire reflector used to add some colour/tone to the models
Face...
All triggered via elinchrom skyport.
Sekonic Flash master L-358 used to take the light measurements....
Post Edit in Photoshop CS4
Many thanks to Howard from Southern strobists for setting the event up and the many models and MUA's for all the hard work & my two team mates Andy & Graham for making the day a buzz.......
Strobist Info:
Single 580EX II in a Westcott RapidBox Duo at 1/2 power, 24mm zoom, on camera axis, supported by a Manfrotto 420B boom. Deflector plate, inner baffle, outer diffuser and egg crate grid in place. Yongnuo YN622C-TX trigger.
Thunder Gray seamless background lit by a Single 580EX at full power, 24mm zoom with a 45 degree Rogue Grid and Steel Green gel, on the floor behind the subject.
After a day of hard work I took Sera Yosta, my most beautiful lens and my Elinchrom light outside to the streets of Amsterdam, just to see what light can do. The temperature was quite high here in The Netherlands, 14 degrees Celcius in mid-december! So, the perfect moment to make some simple clicks.
As light I used the ELB400 & Elinchrom Deep Octa with translucent deflector and inner diffuser.
Lens: Canon EF 85mm f/1.2L II USM on full frame.
Hans van Eijsden Photography, The Netherlands
Postprocessing: Some local adjustment curves.
Portfolio: www.hansvaneijsden.com
Facebook Page: www.facebook.com/hansvaneijsdenphotography
“A Short History of Nearly Everything” ―Bill Bryson, 2003
“Not one of your pertinent ancestors was squashed, devoured, drowned, starved, stranded, stuck fast, untimely wounded, or otherwise deflected from its life's quest of delivering a tiny charge of genetic material to the right partner at the right moment in order to perpetuate the only possible sequence of hereditary combinations that could result -- eventually, astoundingly, and all too briefly -- in you.”
A new project, I have designed the suits myself, as well as one of the features built into the suit.
Batsuit: The Batsuit is heavily plated with Kevlar both on the inside and the outside, the Batsuit is bulletproof and fire resistant, though not invincible.
The Batsuit also contained security devices to keep those not authorized away from trying to lift up the cowl, use a gadget, etc.
Cowl:
The cowl has proven to be bulletproof and fire resistant, though it is not invincible.
The eye area is covered with a white visor, not only to protect the identity but to also act as a tool for solving clues that aren't as visible to the human eye.
Gauntlets:
The slots on the back of Batman's gauntlets are used to store three batarangs on each gauntlet. The batarangs are proven to be useful to deflect sword attacks, knife attacks and many more. The gloves contained custom implemented brass knuckles, delivering a powerful blow to the enemy.
Cape: The cape is proven to be fire resistant and bulletproof. In order for the Batsuit to glide, pressing the symbol (Scanned via handprint) will utilize a memory cloth, causing the cape to become rigid, making it possible to glide.
Symbol: The symbol is the most heavily plated piece of the entire suit, proven to be bulletproof unless hit in the right spot. The symbol is attached to the cape, when the cape covers the entire suit, only the symbol would be visible.
Utility Belts: The utility belt is a vital piece for the detective, the main belt contains explosive gel, smoke grenades, freeze grenades, handcuffs, an EMP disruptor, and a sonar ray.
The utility belt on the upper right thigh contains a holster for a grappling gun, pouches for sleeping darts, gas pellets, a cryptographer sequencer and a line launcher.
Robin's suit: The suit is supported by Kevlar all around the suit due to its appearance, nothing of speciality is to be noted.
Escrima Sticks: On the back, hidden by the cape is a holster for two Escrima Sticks, the sticks are wired with tasers on the end of them.
Utility Belt: The Utility belt consists of a grapnel gun, snapflashes, and wing-dings.
Mask: There is nothing special about the mask, the eye area is covered by a white visor, protecting the identity and being able to spot things others can't.
+++ DISCLAIMER +++
Nothing you see here is real, even though the conversion or the presented background story might be based historical facts. BEWARE!
Some background:
The TIE/LN starfighter, or TIE/line starfighter, simply known as the TIE Fighter or T/F, was the standard Imperial starfighter seen in massive numbers throughout most of the Galactic Civil War and onward.
The TIE Fighter was manufactured by Sienar Fleet Systems and led to several upgraded TIE models such as TIE/sa bomber, TIE/IN interceptor, TIE/D Defender, TIE/D automated starfighter, and many more.
The original TIEs were designed to attack in large numbers, overwhelming the enemy craft. The Imperials used so many that they came to be considered symbols of the Empire and its might. They were also very cheap to produce, reflecting the Imperial philosophy of quantity over quality.
However, a disadvantage of the fighter was its lack of deflector shields. In combat, pilots had to rely on the TIE/LN's maneuverability to avoid damage. The cockpit did incorporate crash webbing, a repulsorlift antigravity field, and a high-g shock seat to help protect the pilot, however these did next to nothing to help protect against enemy blaster fire.
Due to the lack of life-support systems, each TIE pilot had a fully sealed flight suit superior to their Rebel counterparts. The absence of a hyperdrive also rendered the light fighter totally dependent on carrier ships when deployed in enemy systems. TIE/LNs also lacked landing gear, another mass-reducing measure. While the ships were structurally capable of "sitting" on their wings, they were not designed to land or disembark their pilots without special support. On Imperial ships, TIEs were launched from racks in the hangar bays.
The high success rate of more advanced Rebel starfighters against standard Imperial TIE Fighters resulted in a mounting cost of replacing destroyed fighters and their pilots. That, combined with the realization that the inclusion of a hyperdrive would allow the fleet to be more flexible, caused the Imperial Navy to rethink its doctrine of using swarms of cheap craft instead of fewer high-quality ones, leading to the introduction of the TIE Advanced x1 and its successor, the TIE Avenger. The following TIE/D Defender as well as the heavy TIE Escort Fighter (or TIE/E) were touted as the next "logical advance" of the TIE Series—representing a shift in starfighter design from previous, expendable TIE models towards fast, well armed and protected designs, capable of hyperspace travel and long-term crew teams which gained experience and capabilities over time.
The TIE/E Escort, was a high-performance TIE Series starfighter developed for the Imperial Navy by Sienar Fleet Systems and it was introduced into service shortly before the Battle of Endor. It was a much heavier counterpart to the agile and TIE/D fighter, and more of an attack ship or even a light bomber than a true dogfighter. Its role were independent long range operations, and in order to reduce the work load and boost morale a crew of two was introduced (a pilot and a dedicated weapon systems officer/WSO). The primary duty profile included attack and escort task, but also reconnoiter missions. The TIE/E shared the general layout with the contemporary TIE/D fighter, but the cockpit section as well as the central power unit were much bigger, and the ship was considerably heavier.
The crew enjoyed – compared with previous TIE fighter designs – a spacious and now fully pressurized cockpit, so that no pressurized suits had to be worn anymore. The crew members sat in tandem under a large, clear canopy. The pilot in front had a very good field of view, while the WSO sat behind him, in a higher, staggered position with only a limited field of view. Both work stations had separate entries, though, and places could not be switched in flight: the pilot mounted the cockpit through a hatch on port side, while the WSO entered the rear compartment through a roof hatch.
In a departure from the design of previous TIE models, instead of two parallel wings to either side of the pilot module, the TIE Escort had three quadanium steel solar array wings mounted symmetrically around an aft section, which contained an I-s4d solar ionization reactor to store and convert solar energy collected from the wing panels. The inclusion of a third wing provided additional solar power to increase the ship's range and the ship's energy management system was designed to allow weapons and shields to be charged with minimum loss of power to the propulsion system.
Although it was based on the standard twin ion engine design, the TIE/E’s propulsion system was upgraded to the entirely new, powerful P-sz9.8 triple ion engine. This allowed the TIE/E a maximum acceleration of 4,220 G or 21 MGLT/s and a top speed of 144 MGLT, or 1,680 km/h in an atmosphere — almost 40 percent faster than a former standard TIE Fighter. With tractor beam recharge power (see below) redirected to the engines, the top speed could be increased to 180 MGLT in a dash.
In addition to the main thrusters located in the aft section, the TIE Escort's triple wing design allowed for three arrays of maneuvering jets and it featured an advanced F-s5x flight avionics system to process the pilot's instructions. Production models received a class 2, ND9 hyperdrive motivator, modified from the version developed for the TIE Avenger. The TIE/E also carried a Sienar N-s6 Navcon navigation computer with a ten-jump memory.
Special equipment included a small tractor beam projector, originally developed for the TIE Avenger, which could be easily fitted to the voluminous TIE Escort. Models produced by Ysanne Isard's production facility regularly carried such tractor beams and the technology found other uses, such as towing other damaged starfighters until they could achieve the required velocity to enter hyperspace. The tractor beam had limited range and could only be used for a short time before stopping to recharge, but it added new tactics, too. For instance, the beam allowed the TIE/E crews to temporarily inhibit the mobility of enemy fighters, making it easier to target them with the ship's other weapon systems, or prevent enemies from clear shots.
The TIE Escort’s weapons systems were primarily designed to engage bigger ships and armored or shielded targets, like armed freighters frequently used by the Alliance. Thanks to its complex weapon and sensor suite, it could also engage multiple enemy fighters at once. The sensors also allowed an effective attack of ground targets, so that atmospheric bombing was a potential mission for the TIE/E, too.
.
The TIE Escort Fighter carried a formidable array of weaponry in two modular weapon bays that were mounted alongside the lower cabin. In standard configuration, the TIE/E had two L-s9.3 laser cannons and two NK-3 ion cannons. The laser and ion cannons could be set to fire separately or, if concentrated power was required, to fire-linked in either pairs or as a quartet.
The ship also featured two M-g-2 general-purpose warhead launchers, each of which could be equipped with a standard load of three proton torpedoes or four concussion missiles. Depending on the mission profile, the ship could be fitted with alternative warheads such as proton rockets, proton bombs, or magnetic pulse warheads.
Additionally, external stores could be carried under the fuselage, which included a conformal sensor pallet for reconnaissance missions or a cargo bay with a capacity for 500 kg (1.100 lb).
The ship's defenses were provided by a pair of forward and rear projecting Novaldex deflector shield generators—another advantage over former standard TIE models. The shields were designed to recharge more rapidly than in previous Imperial fighters and were nearly as powerful as those found on capital ships, so that the TIE/E could engage other ships head-on with a very high survivability. The fighters were not equipped with particle shields, though, relying on the reinforced titanium hull to absorb impacts from matter. Its hull and wings were among the strongest of any TIE series Starfighter yet.
The advanced starfighter attracted the attention of several other factions, and the Empire struggled to prevent the spread of the technology. The ship's high cost, together with political factors, kept it from achieving widespread use in the Empire, though, and units were assigned only to the most elite crews.
The TIE/E played a central role in the Empire's campaign against rogue Grand Admiral Demetrius Zaarin, and mixed Defender and Escort units participated in several other battles, including the Battle of Endor. The TIE Escort continued to see limited use by the Imperial Remnant up to at least 44 ABY, and was involved in numerous conflicts, including the Yuuzhan Vong War..
The kit and its assembly:
Another group build contribution, this time to the Science Fiction GB at whatifmodelers.com during summer 2017. Originally, this one started as an attempt to build a vintage MPC TIE Interceptor kit which I had bought and half-heartedly started to build probably 20 years ago. But I did not have the right mojo (probably, The Force was not strong enough…?), so the kit ended up in a dark corner and some parts were donated to other projects.
The sun collectors were still intact, though, and in the meantime I had the idea of reviving the kit’s remains, and convert it into (what I thought was) a fictional TIE Fighter variant with three solar panels. For this plan I got myself another TIE Interceptor kit, and stashed it away, too. Mojo was still missing, though.
Well, then came the SF GB and I took it as an occasion to finally tackle the build. But when I prepared for the build I found out that my intended design (over the years) more or less actually existed in the Star Wars universe: the TIE/D Defender! I could have built it with the parts and hand and some improvisation, but the design similarity bugged me. Well, instead of a poor copy of something that was more or less clearly defined, I rather decided to create something more individual, yet plausible, from the parts at hand.
The model was to stay a TIE design, though, in order to use as much donor material from the MPC kits as possible. Doing some legwork, I settled for a heavy fighter – bigger than the TIE Interceptor and the TIE/D fighter, a two-seater.
Working out the basic concept and layout took some time and evolved gradually. The creative spark for the TIE/E eventually came through a Revell “Obi Wan’s Jedi Starfighter” snap fit kit in my pile – actually a prize from a former GB participation at phoxim.de (Thanks a lot, Wolfgang!), and rather a toy than a true model kit.
The Jedi Fighter was in so far handy as it carries some TIE Fighter design traits, like the pilot capsule and the characteristic spider web windscreen. Anyway, it’s 1:32, much bigger than the TIE Interceptor’s roundabout 1:50 scale – but knowing that I’d never build the Jedi Starfighter OOB I used it as a donor bank, and from this starting point things started to evolve gradually.
Work started with the cockpit section, taken from the Jedi Starfighter kit. The two TIE Interceptor cockpit tubs were then mounted inside, staggered, and the gaps to the walls filled with putty. A pretty messy task, and once the shapes had been carved out some triangular tiles were added to the surfaces – a detail I found depicted in SW screenshots and some TIE Fighter models.
Another issue became the crew – even though I had two MPC TIE Interceptors and, theorectically, two pilot figures, only one of them could be found and the second crewman had to be improvised. I normally do not build 1:48 scale things, but I was lucky (and happy) to find an SF driver figure, left over from a small Dougram hoovercraft kit (from Takara, as a Revell “Robotech” reboxing). This driver is a tad bigger than the 1:50 TIE pilot, but I went with it because I did not want to invest money and time in alternatives. In order to justify the size difference I decided to paint the Dougram driver as a Chiss, based on the expanded SW universe (with blue skin and hair, and glowing red eyes). Not certain if this makes sense during the Battle of Endor timeframe, but it adds some color to the project – and the cockpit would not be visible in much detail since it would be finished fully closed.
Reason behind the closed canopy is basically the poor fit of the clear part. OOB, this is intended as an action toy – but also the canopy’s considerable size in 1:50 would prevent its original opening mechanism.
Additional braces on the rel. large window panels were created with self-adhesive tape and later painted over.
The rear fuselage section and the solar panel pylons were scratched. The reactor behind the cockpit section is actually a plastic adapter for water hoses, found in a local DIY market. It was slightly modified, attached to the cockpit “egg” and both parts blended with putty. The tail opening was closed with a hatch from the OOB TIE Interceptor – an incidental but perfect match in size and style.
The three pylons are also lucky finds: actually, these are SF wargaming/tabletop props and would normally be low walls or barriers, made from resin. For my build, they were more or less halved and trimmed. Tilted by 90°, they are attached to the hull with iron wire stabilizers, and later blended to the hull with putty, too.
Once the cockpit was done, things moved more swiftly. The surface of the hull was decorated with many small bits and pieces, including thin styrene sheet and profiles, steel and iron wire in various strengths, and there are even 1:72 tank tracks hidden somewhere, as well as protective caps from syringes (main guns and under the rear fuselage). It’s amazing how much stuff you can add to such a model – but IMHO it’s vital in order to create some structure and to emulate the (early) Star Wars look.
Painting and markings:
The less spectacular part of the project, even though still a lot of work because of the sheer size of the model’s surface. Since the whole thing is fictional, I tried to stay true to the Imperial designs from Episode IV-VI and gave the TIE/E a simple, all-light grey livery. All basic painting was done with rattle cans.
Work started with a basic coat of grey primer. On top of that, an initial coat of RAL 7036 Platingrau was added, esp. to the lower surfaces and recesses, for a rough shading effect. Then, the actual overall tone, RAL 7047, called “Telegrau 4”, one of Deutsche Telekom’s corporate tones, was added - mostly sprayed from abone and the sides onto the model. Fuselage and panels were painted separately, overall assembly was one of the final steps.
The solar panels were to stand out from the grey rest of the model, and I painted them with Revell Acrylic “Iron Metallic” (91) first, and later applied a rather rich wash with black ink , making sure the color settled well into the many small cells. The effect is pretty good, and the contrast was slightly enhanced through a dry-brushing treatment.
Only a few legible stencils were added all around the hull (most from the scrap box or from mecha sheets), the Galactic Empire Seal were inkjet-printed at home, as well as some tactical markings on the flanks, puzzled together from single digits in "Aurebash", one of the Imperial SW languages/fonts.
For some variety and color highlights, dozens of small, round and colorful markings were die-punched from silver, yellow, orange, red and blue decal sheet and were placed all over the hull - together with the large panels they blur into the the overall appearance, though. The hatches received thin red linings, also made from generic decals strips.
The cockpit interior was a bit challenging, though. Good TIE Fighter cockpit interior pictures are hard to find, but they suggest a dark grey tone. More confusingly, the MPC instructions call for a “Dark Green” cockpit? Well, I did not like the all-grey option, since the spaceship is already monochrome grey on the outside.
As a compromise I eventually used Tamiya XF-65 "Field Grey". The interior recieved a black ink in and dry-brushing treatment, and some instruments ansd screens were created with black decal material and glossy black paint; some neon paint was used for sci-fi-esque conmtraol lamps everywhere - I did not pay too much intention on the interior, since the cockpit would stay closed, and the thick clear material blurs everything inside.
Following this rationale, the crew was also painted in arather minimal fashion - both wear a dark grey uniform, only the Chiss pilot stands aout with his light blue skin and the flourescent red eyes.
After an overall black ink wash the model received a dry brusing treatment with FS 36492 and FS 36495, for a weathered and battle-worn look. After all, the "Vehement" would not survive the Ballte of Endor, but who knows what became of TIE/E "801"'s mixed crew...?
Finally, the kit was sealed with matt acrylic varnish, and some final cosmetic corrections made.
The display is a DIY creation, too, made from a 6x6" piece of wood, it's edges covered with edgebonder, a steel wire as holder, and finally the display was paited with semi-matt black acrylic paint from the rattle can.
A complex build, and the TIE/E more or less evolved along the way, with only the overall layout in mind. Work took a month, but I think it was worth the effort. This fantasy creation looks pretty plausible and blends well into the vast canonical TIE Fighter family - and I am happy that I finally could finish this mummy project, including the surplus Jedi Starfighter kit which now also find a very good use!
An epic one, and far outside my standard comfort zone. But a wothwhile build!
boston, massachusetts
1960s
teradyne automatic test equipment
teradyne applied systems
m466
optical beam deflector
(photograph by beach & barnes)
teradyne was founded in 1960 by alex d'arbeloff and nick dewolf. more information available here: en.wikipedia.org/wiki/Teradyne
part of an archival project, featuring the photographs of nick dewolf
© the Nick DeWolf Foundation
Image-use requests are welcome via flickrmail or nickdewolfphotoarchive [at] gmail [dot] com
I passed this MRAP with the deflector rails in good condition (parked outside the Church) and I thought you might want to see how it is supposed to be set up.
The asteroid deflector which opened at the sound of Kirk speaking into his communicator and triggered his loss of memory and marriage to a local on the planet inhabited by Native American type people in the TOS episode The Paradise Syndrome. OK, I know a lot of people did not like this one....but the obelisk is kind of cool, this is a clapper, and Nimoy is looking down finding his mark for filming the scene. The asteroid is coming....
+++ DISCLAIMER +++
Nothing you see here is real, even though the conversion or the presented background story might be based historical facts. BEWARE!
Some background:
The TIE/LN starfighter, or TIE/line starfighter, simply known as the TIE Fighter or T/F, was the standard Imperial starfighter seen in massive numbers throughout most of the Galactic Civil War and onward.
The TIE Fighter was manufactured by Sienar Fleet Systems and led to several upgraded TIE models such as TIE/sa bomber, TIE/IN interceptor, TIE/D Defender, TIE/D automated starfighter, and many more.
The original TIEs were designed to attack in large numbers, overwhelming the enemy craft. The Imperials used so many that they came to be considered symbols of the Empire and its might. They were also very cheap to produce, reflecting the Imperial philosophy of quantity over quality.
However, a disadvantage of the fighter was its lack of deflector shields. In combat, pilots had to rely on the TIE/LN's maneuverability to avoid damage. The cockpit did incorporate crash webbing, a repulsorlift antigravity field, and a high-g shock seat to help protect the pilot, however these did next to nothing to help protect against enemy blaster fire.
Due to the lack of life-support systems, each TIE pilot had a fully sealed flight suit superior to their Rebel counterparts. The absence of a hyperdrive also rendered the light fighter totally dependent on carrier ships when deployed in enemy systems. TIE/LNs also lacked landing gear, another mass-reducing measure. While the ships were structurally capable of "sitting" on their wings, they were not designed to land or disembark their pilots without special support. On Imperial ships, TIEs were launched from racks in the hangar bays.
The high success rate of more advanced Rebel starfighters against standard Imperial TIE Fighters resulted in a mounting cost of replacing destroyed fighters and their pilots. That, combined with the realization that the inclusion of a hyperdrive would allow the fleet to be more flexible, caused the Imperial Navy to rethink its doctrine of using swarms of cheap craft instead of fewer high-quality ones, leading to the introduction of the TIE Advanced x1 and its successor, the TIE Avenger. The following TIE/D Defender as well as the heavy TIE Escort Fighter (or TIE/E) were touted as the next "logical advance" of the TIE Series—representing a shift in starfighter design from previous, expendable TIE models towards fast, well armed and protected designs, capable of hyperspace travel and long-term crew teams which gained experience and capabilities over time.
The TIE/E Escort, was a high-performance TIE Series starfighter developed for the Imperial Navy by Sienar Fleet Systems and it was introduced into service shortly before the Battle of Endor. It was a much heavier counterpart to the agile and TIE/D fighter, and more of an attack ship or even a light bomber than a true dogfighter. Its role were independent long range operations, and in order to reduce the work load and boost morale a crew of two was introduced (a pilot and a dedicated weapon systems officer/WSO). The primary duty profile included attack and escort task, but also reconnoiter missions. The TIE/E shared the general layout with the contemporary TIE/D fighter, but the cockpit section as well as the central power unit were much bigger, and the ship was considerably heavier.
The crew enjoyed – compared with previous TIE fighter designs – a spacious and now fully pressurized cockpit, so that no pressurized suits had to be worn anymore. The crew members sat in tandem under a large, clear canopy. The pilot in front had a very good field of view, while the WSO sat behind him, in a higher, staggered position with only a limited field of view. Both work stations had separate entries, though, and places could not be switched in flight: the pilot mounted the cockpit through a hatch on port side, while the WSO entered the rear compartment through a roof hatch.
In a departure from the design of previous TIE models, instead of two parallel wings to either side of the pilot module, the TIE Escort had three quadanium steel solar array wings mounted symmetrically around an aft section, which contained an I-s4d solar ionization reactor to store and convert solar energy collected from the wing panels. The inclusion of a third wing provided additional solar power to increase the ship's range and the ship's energy management system was designed to allow weapons and shields to be charged with minimum loss of power to the propulsion system.
Although it was based on the standard twin ion engine design, the TIE/E’s propulsion system was upgraded to the entirely new, powerful P-sz9.8 triple ion engine. This allowed the TIE/E a maximum acceleration of 4,220 G or 21 MGLT/s and a top speed of 144 MGLT, or 1,680 km/h in an atmosphere — almost 40 percent faster than a former standard TIE Fighter. With tractor beam recharge power (see below) redirected to the engines, the top speed could be increased to 180 MGLT in a dash.
In addition to the main thrusters located in the aft section, the TIE Escort's triple wing design allowed for three arrays of maneuvering jets and it featured an advanced F-s5x flight avionics system to process the pilot's instructions. Production models received a class 2, ND9 hyperdrive motivator, modified from the version developed for the TIE Avenger. The TIE/E also carried a Sienar N-s6 Navcon navigation computer with a ten-jump memory.
Special equipment included a small tractor beam projector, originally developed for the TIE Avenger, which could be easily fitted to the voluminous TIE Escort. Models produced by Ysanne Isard's production facility regularly carried such tractor beams and the technology found other uses, such as towing other damaged starfighters until they could achieve the required velocity to enter hyperspace. The tractor beam had limited range and could only be used for a short time before stopping to recharge, but it added new tactics, too. For instance, the beam allowed the TIE/E crews to temporarily inhibit the mobility of enemy fighters, making it easier to target them with the ship's other weapon systems, or prevent enemies from clear shots.
The TIE Escort’s weapons systems were primarily designed to engage bigger ships and armored or shielded targets, like armed freighters frequently used by the Alliance. Thanks to its complex weapon and sensor suite, it could also engage multiple enemy fighters at once. The sensors also allowed an effective attack of ground targets, so that atmospheric bombing was a potential mission for the TIE/E, too.
.
The TIE Escort Fighter carried a formidable array of weaponry in two modular weapon bays that were mounted alongside the lower cabin. In standard configuration, the TIE/E had two L-s9.3 laser cannons and two NK-3 ion cannons. The laser and ion cannons could be set to fire separately or, if concentrated power was required, to fire-linked in either pairs or as a quartet.
The ship also featured two M-g-2 general-purpose warhead launchers, each of which could be equipped with a standard load of three proton torpedoes or four concussion missiles. Depending on the mission profile, the ship could be fitted with alternative warheads such as proton rockets, proton bombs, or magnetic pulse warheads.
Additionally, external stores could be carried under the fuselage, which included a conformal sensor pallet for reconnaissance missions or a cargo bay with a capacity for 500 kg (1.100 lb).
The ship's defenses were provided by a pair of forward and rear projecting Novaldex deflector shield generators—another advantage over former standard TIE models. The shields were designed to recharge more rapidly than in previous Imperial fighters and were nearly as powerful as those found on capital ships, so that the TIE/E could engage other ships head-on with a very high survivability. The fighters were not equipped with particle shields, though, relying on the reinforced titanium hull to absorb impacts from matter. Its hull and wings were among the strongest of any TIE series Starfighter yet.
The advanced starfighter attracted the attention of several other factions, and the Empire struggled to prevent the spread of the technology. The ship's high cost, together with political factors, kept it from achieving widespread use in the Empire, though, and units were assigned only to the most elite crews.
The TIE/E played a central role in the Empire's campaign against rogue Grand Admiral Demetrius Zaarin, and mixed Defender and Escort units participated in several other battles, including the Battle of Endor. The TIE Escort continued to see limited use by the Imperial Remnant up to at least 44 ABY, and was involved in numerous conflicts, including the Yuuzhan Vong War..
The kit and its assembly:
Another group build contribution, this time to the Science Fiction GB at whatifmodelers.com during summer 2017. Originally, this one started as an attempt to build a vintage MPC TIE Interceptor kit which I had bought and half-heartedly started to build probably 20 years ago. But I did not have the right mojo (probably, The Force was not strong enough…?), so the kit ended up in a dark corner and some parts were donated to other projects.
The sun collectors were still intact, though, and in the meantime I had the idea of reviving the kit’s remains, and convert it into (what I thought was) a fictional TIE Fighter variant with three solar panels. For this plan I got myself another TIE Interceptor kit, and stashed it away, too. Mojo was still missing, though.
Well, then came the SF GB and I took it as an occasion to finally tackle the build. But when I prepared for the build I found out that my intended design (over the years) more or less actually existed in the Star Wars universe: the TIE/D Defender! I could have built it with the parts and hand and some improvisation, but the design similarity bugged me. Well, instead of a poor copy of something that was more or less clearly defined, I rather decided to create something more individual, yet plausible, from the parts at hand.
The model was to stay a TIE design, though, in order to use as much donor material from the MPC kits as possible. Doing some legwork, I settled for a heavy fighter – bigger than the TIE Interceptor and the TIE/D fighter, a two-seater.
Working out the basic concept and layout took some time and evolved gradually. The creative spark for the TIE/E eventually came through a Revell “Obi Wan’s Jedi Starfighter” snap fit kit in my pile – actually a prize from a former GB participation at phoxim.de (Thanks a lot, Wolfgang!), and rather a toy than a true model kit.
The Jedi Fighter was in so far handy as it carries some TIE Fighter design traits, like the pilot capsule and the characteristic spider web windscreen. Anyway, it’s 1:32, much bigger than the TIE Interceptor’s roundabout 1:50 scale – but knowing that I’d never build the Jedi Starfighter OOB I used it as a donor bank, and from this starting point things started to evolve gradually.
Work started with the cockpit section, taken from the Jedi Starfighter kit. The two TIE Interceptor cockpit tubs were then mounted inside, staggered, and the gaps to the walls filled with putty. A pretty messy task, and once the shapes had been carved out some triangular tiles were added to the surfaces – a detail I found depicted in SW screenshots and some TIE Fighter models.
Another issue became the crew – even though I had two MPC TIE Interceptors and, theorectically, two pilot figures, only one of them could be found and the second crewman had to be improvised. I normally do not build 1:48 scale things, but I was lucky (and happy) to find an SF driver figure, left over from a small Dougram hoovercraft kit (from Takara, as a Revell “Robotech” reboxing). This driver is a tad bigger than the 1:50 TIE pilot, but I went with it because I did not want to invest money and time in alternatives. In order to justify the size difference I decided to paint the Dougram driver as a Chiss, based on the expanded SW universe (with blue skin and hair, and glowing red eyes). Not certain if this makes sense during the Battle of Endor timeframe, but it adds some color to the project – and the cockpit would not be visible in much detail since it would be finished fully closed.
Reason behind the closed canopy is basically the poor fit of the clear part. OOB, this is intended as an action toy – but also the canopy’s considerable size in 1:50 would prevent its original opening mechanism.
Additional braces on the rel. large window panels were created with self-adhesive tape and later painted over.
The rear fuselage section and the solar panel pylons were scratched. The reactor behind the cockpit section is actually a plastic adapter for water hoses, found in a local DIY market. It was slightly modified, attached to the cockpit “egg” and both parts blended with putty. The tail opening was closed with a hatch from the OOB TIE Interceptor – an incidental but perfect match in size and style.
The three pylons are also lucky finds: actually, these are SF wargaming/tabletop props and would normally be low walls or barriers, made from resin. For my build, they were more or less halved and trimmed. Tilted by 90°, they are attached to the hull with iron wire stabilizers, and later blended to the hull with putty, too.
Once the cockpit was done, things moved more swiftly. The surface of the hull was decorated with many small bits and pieces, including thin styrene sheet and profiles, steel and iron wire in various strengths, and there are even 1:72 tank tracks hidden somewhere, as well as protective caps from syringes (main guns and under the rear fuselage). It’s amazing how much stuff you can add to such a model – but IMHO it’s vital in order to create some structure and to emulate the (early) Star Wars look.
Painting and markings:
The less spectacular part of the project, even though still a lot of work because of the sheer size of the model’s surface. Since the whole thing is fictional, I tried to stay true to the Imperial designs from Episode IV-VI and gave the TIE/E a simple, all-light grey livery. All basic painting was done with rattle cans.
Work started with a basic coat of grey primer. On top of that, an initial coat of RAL 7036 Platingrau was added, esp. to the lower surfaces and recesses, for a rough shading effect. Then, the actual overall tone, RAL 7047, called “Telegrau 4”, one of Deutsche Telekom’s corporate tones, was added - mostly sprayed from abone and the sides onto the model. Fuselage and panels were painted separately, overall assembly was one of the final steps.
The solar panels were to stand out from the grey rest of the model, and I painted them with Revell Acrylic “Iron Metallic” (91) first, and later applied a rather rich wash with black ink , making sure the color settled well into the many small cells. The effect is pretty good, and the contrast was slightly enhanced through a dry-brushing treatment.
Only a few legible stencils were added all around the hull (most from the scrap box or from mecha sheets), the Galactic Empire Seal were inkjet-printed at home, as well as some tactical markings on the flanks, puzzled together from single digits in "Aurebash", one of the Imperial SW languages/fonts.
For some variety and color highlights, dozens of small, round and colorful markings were die-punched from silver, yellow, orange, red and blue decal sheet and were placed all over the hull - together with the large panels they blur into the the overall appearance, though. The hatches received thin red linings, also made from generic decals strips.
The cockpit interior was a bit challenging, though. Good TIE Fighter cockpit interior pictures are hard to find, but they suggest a dark grey tone. More confusingly, the MPC instructions call for a “Dark Green” cockpit? Well, I did not like the all-grey option, since the spaceship is already monochrome grey on the outside.
As a compromise I eventually used Tamiya XF-65 "Field Grey". The interior recieved a black ink in and dry-brushing treatment, and some instruments ansd screens were created with black decal material and glossy black paint; some neon paint was used for sci-fi-esque conmtraol lamps everywhere - I did not pay too much intention on the interior, since the cockpit would stay closed, and the thick clear material blurs everything inside.
Following this rationale, the crew was also painted in arather minimal fashion - both wear a dark grey uniform, only the Chiss pilot stands aout with his light blue skin and the flourescent red eyes.
After an overall black ink wash the model received a dry brusing treatment with FS 36492 and FS 36495, for a weathered and battle-worn look. After all, the "Vehement" would not survive the Ballte of Endor, but who knows what became of TIE/E "801"'s mixed crew...?
Finally, the kit was sealed with matt acrylic varnish, and some final cosmetic corrections made.
The display is a DIY creation, too, made from a 6x6" piece of wood, it's edges covered with edgebonder, a steel wire as holder, and finally the display was paited with semi-matt black acrylic paint from the rattle can.
A complex build, and the TIE/E more or less evolved along the way, with only the overall layout in mind. Work took a month, but I think it was worth the effort. This fantasy creation looks pretty plausible and blends well into the vast canonical TIE Fighter family - and I am happy that I finally could finish this mummy project, including the surplus Jedi Starfighter kit which now also find a very good use!
An epic one, and far outside my standard comfort zone. But a wothwhile build!
After a day of hard work I took Sera Yosta, my most beautiful lens and my Elinchrom light outside to the streets of Amsterdam, just to see what light can do. The temperature was quite high here in The Netherlands, 14 degrees Celcius in mid-december! So, the perfect moment to make some simple clicks.
As light I used the ELB400 & Elinchrom Deep Octa with translucent deflector and inner diffuser.
Lens: Canon EF 85mm f/1.2L II USM on full frame.
Hans van Eijsden Photography, The Netherlands
Postprocessing: Some local adjustment curves.
Portfolio: www.hansvaneijsden.com
Facebook Page: www.facebook.com/hansvaneijsdenphotography
+++ DISCLAIMER +++
Nothing you see here is real, even though the conversion or the presented background story might be based historical facts. BEWARE!
Some background:
The TIE/LN starfighter, or TIE/line starfighter, simply known as the TIE Fighter or T/F, was the standard Imperial starfighter seen in massive numbers throughout most of the Galactic Civil War and onward.
The TIE Fighter was manufactured by Sienar Fleet Systems and led to several upgraded TIE models such as TIE/sa bomber, TIE/IN interceptor, TIE/D Defender, TIE/D automated starfighter, and many more.
The original TIEs were designed to attack in large numbers, overwhelming the enemy craft. The Imperials used so many that they came to be considered symbols of the Empire and its might. They were also very cheap to produce, reflecting the Imperial philosophy of quantity over quality.
However, a disadvantage of the fighter was its lack of deflector shields. In combat, pilots had to rely on the TIE/LN's maneuverability to avoid damage. The cockpit did incorporate crash webbing, a repulsorlift antigravity field, and a high-g shock seat to help protect the pilot, however these did next to nothing to help protect against enemy blaster fire.
Due to the lack of life-support systems, each TIE pilot had a fully sealed flight suit superior to their Rebel counterparts. The absence of a hyperdrive also rendered the light fighter totally dependent on carrier ships when deployed in enemy systems. TIE/LNs also lacked landing gear, another mass-reducing measure. While the ships were structurally capable of "sitting" on their wings, they were not designed to land or disembark their pilots without special support. On Imperial ships, TIEs were launched from racks in the hangar bays.
The high success rate of more advanced Rebel starfighters against standard Imperial TIE Fighters resulted in a mounting cost of replacing destroyed fighters and their pilots. That, combined with the realization that the inclusion of a hyperdrive would allow the fleet to be more flexible, caused the Imperial Navy to rethink its doctrine of using swarms of cheap craft instead of fewer high-quality ones, leading to the introduction of the TIE Advanced x1 and its successor, the TIE Avenger. The following TIE/D Defender as well as the heavy TIE Escort Fighter (or TIE/E) were touted as the next "logical advance" of the TIE Series—representing a shift in starfighter design from previous, expendable TIE models towards fast, well armed and protected designs, capable of hyperspace travel and long-term crew teams which gained experience and capabilities over time.
The TIE/E Escort, was a high-performance TIE Series starfighter developed for the Imperial Navy by Sienar Fleet Systems and it was introduced into service shortly before the Battle of Endor. It was a much heavier counterpart to the agile and TIE/D fighter, and more of an attack ship or even a light bomber than a true dogfighter. Its role were independent long range operations, and in order to reduce the work load and boost morale a crew of two was introduced (a pilot and a dedicated weapon systems officer/WSO). The primary duty profile included attack and escort task, but also reconnoiter missions. The TIE/E shared the general layout with the contemporary TIE/D fighter, but the cockpit section as well as the central power unit were much bigger, and the ship was considerably heavier.
The crew enjoyed – compared with previous TIE fighter designs – a spacious and now fully pressurized cockpit, so that no pressurized suits had to be worn anymore. The crew members sat in tandem under a large, clear canopy. The pilot in front had a very good field of view, while the WSO sat behind him, in a higher, staggered position with only a limited field of view. Both work stations had separate entries, though, and places could not be switched in flight: the pilot mounted the cockpit through a hatch on port side, while the WSO entered the rear compartment through a roof hatch.
In a departure from the design of previous TIE models, instead of two parallel wings to either side of the pilot module, the TIE Escort had three quadanium steel solar array wings mounted symmetrically around an aft section, which contained an I-s4d solar ionization reactor to store and convert solar energy collected from the wing panels. The inclusion of a third wing provided additional solar power to increase the ship's range and the ship's energy management system was designed to allow weapons and shields to be charged with minimum loss of power to the propulsion system.
Although it was based on the standard twin ion engine design, the TIE/E’s propulsion system was upgraded to the entirely new, powerful P-sz9.8 triple ion engine. This allowed the TIE/E a maximum acceleration of 4,220 G or 21 MGLT/s and a top speed of 144 MGLT, or 1,680 km/h in an atmosphere — almost 40 percent faster than a former standard TIE Fighter. With tractor beam recharge power (see below) redirected to the engines, the top speed could be increased to 180 MGLT in a dash.
In addition to the main thrusters located in the aft section, the TIE Escort's triple wing design allowed for three arrays of maneuvering jets and it featured an advanced F-s5x flight avionics system to process the pilot's instructions. Production models received a class 2, ND9 hyperdrive motivator, modified from the version developed for the TIE Avenger. The TIE/E also carried a Sienar N-s6 Navcon navigation computer with a ten-jump memory.
Special equipment included a small tractor beam projector, originally developed for the TIE Avenger, which could be easily fitted to the voluminous TIE Escort. Models produced by Ysanne Isard's production facility regularly carried such tractor beams and the technology found other uses, such as towing other damaged starfighters until they could achieve the required velocity to enter hyperspace. The tractor beam had limited range and could only be used for a short time before stopping to recharge, but it added new tactics, too. For instance, the beam allowed the TIE/E crews to temporarily inhibit the mobility of enemy fighters, making it easier to target them with the ship's other weapon systems, or prevent enemies from clear shots.
The TIE Escort’s weapons systems were primarily designed to engage bigger ships and armored or shielded targets, like armed freighters frequently used by the Alliance. Thanks to its complex weapon and sensor suite, it could also engage multiple enemy fighters at once. The sensors also allowed an effective attack of ground targets, so that atmospheric bombing was a potential mission for the TIE/E, too.
.
The TIE Escort Fighter carried a formidable array of weaponry in two modular weapon bays that were mounted alongside the lower cabin. In standard configuration, the TIE/E had two L-s9.3 laser cannons and two NK-3 ion cannons. The laser and ion cannons could be set to fire separately or, if concentrated power was required, to fire-linked in either pairs or as a quartet.
The ship also featured two M-g-2 general-purpose warhead launchers, each of which could be equipped with a standard load of three proton torpedoes or four concussion missiles. Depending on the mission profile, the ship could be fitted with alternative warheads such as proton rockets, proton bombs, or magnetic pulse warheads.
Additionally, external stores could be carried under the fuselage, which included a conformal sensor pallet for reconnaissance missions or a cargo bay with a capacity for 500 kg (1.100 lb).
The ship's defenses were provided by a pair of forward and rear projecting Novaldex deflector shield generators—another advantage over former standard TIE models. The shields were designed to recharge more rapidly than in previous Imperial fighters and were nearly as powerful as those found on capital ships, so that the TIE/E could engage other ships head-on with a very high survivability. The fighters were not equipped with particle shields, though, relying on the reinforced titanium hull to absorb impacts from matter. Its hull and wings were among the strongest of any TIE series Starfighter yet.
The advanced starfighter attracted the attention of several other factions, and the Empire struggled to prevent the spread of the technology. The ship's high cost, together with political factors, kept it from achieving widespread use in the Empire, though, and units were assigned only to the most elite crews.
The TIE/E played a central role in the Empire's campaign against rogue Grand Admiral Demetrius Zaarin, and mixed Defender and Escort units participated in several other battles, including the Battle of Endor. The TIE Escort continued to see limited use by the Imperial Remnant up to at least 44 ABY, and was involved in numerous conflicts, including the Yuuzhan Vong War..
The kit and its assembly:
Another group build contribution, this time to the Science Fiction GB at whatifmodelers.com during summer 2017. Originally, this one started as an attempt to build a vintage MPC TIE Interceptor kit which I had bought and half-heartedly started to build probably 20 years ago. But I did not have the right mojo (probably, The Force was not strong enough…?), so the kit ended up in a dark corner and some parts were donated to other projects.
The sun collectors were still intact, though, and in the meantime I had the idea of reviving the kit’s remains, and convert it into (what I thought was) a fictional TIE Fighter variant with three solar panels. For this plan I got myself another TIE Interceptor kit, and stashed it away, too. Mojo was still missing, though.
Well, then came the SF GB and I took it as an occasion to finally tackle the build. But when I prepared for the build I found out that my intended design (over the years) more or less actually existed in the Star Wars universe: the TIE/D Defender! I could have built it with the parts and hand and some improvisation, but the design similarity bugged me. Well, instead of a poor copy of something that was more or less clearly defined, I rather decided to create something more individual, yet plausible, from the parts at hand.
The model was to stay a TIE design, though, in order to use as much donor material from the MPC kits as possible. Doing some legwork, I settled for a heavy fighter – bigger than the TIE Interceptor and the TIE/D fighter, a two-seater.
Working out the basic concept and layout took some time and evolved gradually. The creative spark for the TIE/E eventually came through a Revell “Obi Wan’s Jedi Starfighter” snap fit kit in my pile – actually a prize from a former GB participation at phoxim.de (Thanks a lot, Wolfgang!), and rather a toy than a true model kit.
The Jedi Fighter was in so far handy as it carries some TIE Fighter design traits, like the pilot capsule and the characteristic spider web windscreen. Anyway, it’s 1:32, much bigger than the TIE Interceptor’s roundabout 1:50 scale – but knowing that I’d never build the Jedi Starfighter OOB I used it as a donor bank, and from this starting point things started to evolve gradually.
Work started with the cockpit section, taken from the Jedi Starfighter kit. The two TIE Interceptor cockpit tubs were then mounted inside, staggered, and the gaps to the walls filled with putty. A pretty messy task, and once the shapes had been carved out some triangular tiles were added to the surfaces – a detail I found depicted in SW screenshots and some TIE Fighter models.
Another issue became the crew – even though I had two MPC TIE Interceptors and, theorectically, two pilot figures, only one of them could be found and the second crewman had to be improvised. I normally do not build 1:48 scale things, but I was lucky (and happy) to find an SF driver figure, left over from a small Dougram hoovercraft kit (from Takara, as a Revell “Robotech” reboxing). This driver is a tad bigger than the 1:50 TIE pilot, but I went with it because I did not want to invest money and time in alternatives. In order to justify the size difference I decided to paint the Dougram driver as a Chiss, based on the expanded SW universe (with blue skin and hair, and glowing red eyes). Not certain if this makes sense during the Battle of Endor timeframe, but it adds some color to the project – and the cockpit would not be visible in much detail since it would be finished fully closed.
Reason behind the closed canopy is basically the poor fit of the clear part. OOB, this is intended as an action toy – but also the canopy’s considerable size in 1:50 would prevent its original opening mechanism.
Additional braces on the rel. large window panels were created with self-adhesive tape and later painted over.
The rear fuselage section and the solar panel pylons were scratched. The reactor behind the cockpit section is actually a plastic adapter for water hoses, found in a local DIY market. It was slightly modified, attached to the cockpit “egg” and both parts blended with putty. The tail opening was closed with a hatch from the OOB TIE Interceptor – an incidental but perfect match in size and style.
The three pylons are also lucky finds: actually, these are SF wargaming/tabletop props and would normally be low walls or barriers, made from resin. For my build, they were more or less halved and trimmed. Tilted by 90°, they are attached to the hull with iron wire stabilizers, and later blended to the hull with putty, too.
Once the cockpit was done, things moved more swiftly. The surface of the hull was decorated with many small bits and pieces, including thin styrene sheet and profiles, steel and iron wire in various strengths, and there are even 1:72 tank tracks hidden somewhere, as well as protective caps from syringes (main guns and under the rear fuselage). It’s amazing how much stuff you can add to such a model – but IMHO it’s vital in order to create some structure and to emulate the (early) Star Wars look.
Painting and markings:
The less spectacular part of the project, even though still a lot of work because of the sheer size of the model’s surface. Since the whole thing is fictional, I tried to stay true to the Imperial designs from Episode IV-VI and gave the TIE/E a simple, all-light grey livery. All basic painting was done with rattle cans.
Work started with a basic coat of grey primer. On top of that, an initial coat of RAL 7036 Platingrau was added, esp. to the lower surfaces and recesses, for a rough shading effect. Then, the actual overall tone, RAL 7047, called “Telegrau 4”, one of Deutsche Telekom’s corporate tones, was added - mostly sprayed from abone and the sides onto the model. Fuselage and panels were painted separately, overall assembly was one of the final steps.
The solar panels were to stand out from the grey rest of the model, and I painted them with Revell Acrylic “Iron Metallic” (91) first, and later applied a rather rich wash with black ink , making sure the color settled well into the many small cells. The effect is pretty good, and the contrast was slightly enhanced through a dry-brushing treatment.
Only a few legible stencils were added all around the hull (most from the scrap box or from mecha sheets), the Galactic Empire Seal were inkjet-printed at home, as well as some tactical markings on the flanks, puzzled together from single digits in "Aurebash", one of the Imperial SW languages/fonts.
For some variety and color highlights, dozens of small, round and colorful markings were die-punched from silver, yellow, orange, red and blue decal sheet and were placed all over the hull - together with the large panels they blur into the the overall appearance, though. The hatches received thin red linings, also made from generic decals strips.
The cockpit interior was a bit challenging, though. Good TIE Fighter cockpit interior pictures are hard to find, but they suggest a dark grey tone. More confusingly, the MPC instructions call for a “Dark Green” cockpit? Well, I did not like the all-grey option, since the spaceship is already monochrome grey on the outside.
As a compromise I eventually used Tamiya XF-65 "Field Grey". The interior recieved a black ink in and dry-brushing treatment, and some instruments ansd screens were created with black decal material and glossy black paint; some neon paint was used for sci-fi-esque conmtraol lamps everywhere - I did not pay too much intention on the interior, since the cockpit would stay closed, and the thick clear material blurs everything inside.
Following this rationale, the crew was also painted in arather minimal fashion - both wear a dark grey uniform, only the Chiss pilot stands aout with his light blue skin and the flourescent red eyes.
After an overall black ink wash the model received a dry brusing treatment with FS 36492 and FS 36495, for a weathered and battle-worn look. After all, the "Vehement" would not survive the Ballte of Endor, but who knows what became of TIE/E "801"'s mixed crew...?
Finally, the kit was sealed with matt acrylic varnish, and some final cosmetic corrections made.
The display is a DIY creation, too, made from a 6x6" piece of wood, it's edges covered with edgebonder, a steel wire as holder, and finally the display was paited with semi-matt black acrylic paint from the rattle can.
A complex build, and the TIE/E more or less evolved along the way, with only the overall layout in mind. Work took a month, but I think it was worth the effort. This fantasy creation looks pretty plausible and blends well into the vast canonical TIE Fighter family - and I am happy that I finally could finish this mummy project, including the surplus Jedi Starfighter kit which now also find a very good use!
An epic one, and far outside my standard comfort zone. But a wothwhile build!
Added some battle damage, a couple of deflected rounds o the front of the hull. Primed....waiting on tracks to complete the road wheels.
Canon 5d mk III, Canon 70-200 usm is II.
Elinchrom Quadra with Maxi lite and silver deflector camera right and above.
Budapest Hungary 24/04/2005. Vasuttorteneti Park. (Formaly Budupest North loco'depot. ).4-8-0 ,424 009 in pre WW2 condition ,single chimney and no smoke deflectors.
Hans van Eijsden Photography, The Netherlands
MUA: Martina Kató
Lens: Canon EF 85mm f/1.2L II USM on full frame.
Light: Simple setup with one Elinchrom ELB 400 + HS Head through a Deep Octa with silver deflector and inner diffuser from the front-side, light from the back is ambient light. I shot in Hi-Sync Speed with the Elinchrom Skyport HS trigger, so I could open the lens almost completely.
Postprocessing: Some local adjustment curves, BW conversion, some local cloning, grain.
Portfolio: www.hansvaneijsden.com
Facebook Page: www.facebook.com/hansvaneijsdenphotography
Hans van Eijsden Photography, The Netherlands
Model: Tamara Terzic - MUAH: Ayse Aslan
Lens: Canon EF 85mm f/1.2L II USM on full frame.
Light: Large clamshell setup with the Elinchrom ELC 1000 through a Deep Octa with silver deflector from the front-top-side, which creates the ultra high metallic contrast in her face. Elinchrom ELC 500 with small strip box from the front-bottom-side, to lower the density of some shadows. Elinchrom ELC 500 through a dish from the back. I measured the light with the Sekonic L-758DR.
Postprocessing: Some local adjustment curves, some local cloning.
Portfolio: www.hansvaneijsden.com
Facebook Page: www.facebook.com/hansvaneijsdenphotography
Running without its smoke deflectors, K190 leads D3639 up the ladder track at Newport Workshops during Steamrails Open Day. K190 had only just received its new crimson colour over summer & this was its first public outing. 13/3/16
Phil Dalhausser (USA, #2) chasing down a ball deflected out of the court. Nick Lucena looks on. WSOBV Long Beach 2015 Semifinal.