View allAll Photos Tagged CreativeTools
This 3D-file is the result of a project in which a 1000-year-old Viking belt buckle was laser scanned and 3D printed to achieve a copy of the unique archaeological artifact.
You can read the full article about this project via the URL below.
www.creativetools.se/3d-utskrifter-3d-skrivare/11182-3d-s...
Feel free to share this 3D object and the contents of the article under the Creative Commons Attribution-Share Alike 3.0 Unported license.
This 3D-file is the result of a project in which a 1000-year-old Viking belt buckle was laser scanned and 3D printed to achieve a copy of the unique archaeological artifact.
You can read the full article about this project via the URL below.
www.creativetools.se/3d-utskrifter-3d-skrivare/11182-3d-s...
Feel free to share this 3D object and the contents of the article under the Creative Commons Attribution-Share Alike 3.0 Unported license.
The Wanhao Duplicator 5S Desktop 3D Printer. A large format high quality FFF (Fused Filament Fabrication) type 3D printer.
This 3D-file is the result of a project in which a 1000-year-old Viking belt buckle was laser scanned and 3D printed to achieve a copy of the unique archaeological artifact.
You can read the full article about this project via the URL below.
www.creativetools.se/3d-utskrifter-3d-skrivare/11182-3d-s...
Feel free to share this 3D object and the contents of the article under the Creative Commons Attribution-Share Alike 3.0 Unported license.
3D-printed on a MakerBot Replicator 2 FFF 3D printer (makerbot.creativetools.se) with PLA plastic filament.
Download the model from www.thingiverse.com/thing:68880
A 3D printed handle for securing a needle or thin wire while unclogging a jammed printhead nozzle.
The 3D printer: makerbot.creativetools.se
The 3D file: www.thingiverse.com/thing:99969
A 3D printable grip and lens cover for the ASUS XTION motion sensing hardware which is very affordable and popularly used as a hand-held 3D scanner.
- www.thingiverse.com/thing:126936
- www.instructables.com/id/EI6NW7FHPWBYIDB/
The 3D scanner: bit.ly/1bBmlMq
The 3D printer: makerbot.creativetools.se
The 3D model: www.thingiverse.com/thing:126936
Toy crossbow replacement sight for popular suction cup arrow toy crossbow.
This is a spare part for a popular toy crossbow where the front sight often get lost. The model is easily 3D-printable with built-in break-away support structures.
It should fit most variations of this toy weapon. The source CAD file is also provided so that changes can easily be made.
• Download the STL file
• 3D print it
• Remove the support structure with wire cutters or a sharp knife. (don't cut yourself!)
• Place it on the front of your crossbow
• Start shooting strait :)
Download the 3D file from: www.thingiverse.com/thing:71846
3D-printed on a makerbot.creativetools.se
This 3D-file is the result of a project in which a 1000-year-old Viking belt buckle was laser scanned and 3D printed to achieve a copy of the unique archaeological artifact.
You can read the full article about this project via the URL below.
www.creativetools.se/3d-utskrifter-3d-skrivare/11182-3d-s...
Feel free to share this 3D object and the contents of the article under the Creative Commons Attribution-Share Alike 3.0 Unported license.
This 3D-file is the result of a project in which a 1000-year-old Viking belt buckle was laser scanned and 3D printed to achieve a copy of the unique archaeological artifact.
You can read the full article about this project via the URL below.
www.creativetools.se/3d-utskrifter-3d-skrivare/11182-3d-s...
Feel free to share this 3D object and the contents of the article under the Creative Commons Attribution-Share Alike 3.0 Unported license.
This is a slight remix of Fabricatis clever design of an egg cup with chick feet. All credits here to Fabricatis, we just made a smoother version.
The original version can be found here www.thingiverse.com/thing:26674
Made on a makerbot.creativetools.se
English
Image of an antique wooden toy horsse taken with a PackshotCreator photo studio by Creative Tools AB.
Swedish
Produktbild av en antik trähästleksak tagen med en PackshotCreator fotostudio av Creative Tools AB.
English
Image of a round tin can of cookies taken with a PackshotCreator photo studio by Creative Tools AB.
Swedish
Produktbild av rund plåtburk för kakor tagen med en PackshotCreator fotostudio av Creative Tools AB.
A 3D printed handle for securing a needle or thin wire while unclogging a jammed printhead nozzle.
The 3D printer: makerbot.creativetools.se
The 3D file: www.thingiverse.com/thing:99969
This 3D-file is the result of a project in which a 1000-year-old Viking belt buckle was laser scanned and 3D printed to achieve a copy of the unique archaeological artifact.
You can read the full article about this project via the URL below.
www.creativetools.se/3d-utskrifter-3d-skrivare/11182-3d-s...
Feel free to share this 3D object and the contents of the article under the Creative Commons Attribution-Share Alike 3.0 Unported license.
3D-model of Daniel Norée 3D-printed at Printrbot's full Z-height (150 mm).
The 3D-printer: printrbot.creativetools.se
form2.creativetools.se
The Formlabs Form 2 stereolithography 3D printer for super fine professional 3D prints right on your desktop.
The 3D model: www.thingiverse.com/thing:69491
The 3D printer: makerbot.creativetools.se
For more information creative-tools.com
This is a slight remix of Fabricatis clever design of an egg cup with chick feet. All credits here to Fabricatis, we just made a smoother version.
The original version can be found here www.thingiverse.com/thing:26674
Made on a makerbot.creativetools.se
This is a slight remix of Fabricatis clever design of an egg cup with chick feet. All credits here to Fabricatis, we just made a smoother version.
The original version can be found here www.thingiverse.com/thing:26674
Made on a makerbot.creativetools.se
Toy crossbow replacement sight for popular suction cup arrow toy crossbow.
This is a spare part for a popular toy crossbow where the front sight often get lost. The model is easily 3D-printable with built-in break-away support structures.
It should fit most variations of this toy weapon. The source CAD file is also provided so that changes can easily be made.
• Download the STL file
• 3D print it
• Remove the support structure with wire cutters or a sharp knife. (don't cut yourself!)
• Place it on the front of your crossbow
• Start shooting strait :)
Download the 3D file from: www.thingiverse.com/thing:71846
3D-printed on a makerbot.creativetools.se
Toy crossbow replacement sight for popular suction cup arrow toy crossbow.
This is a spare part for a popular toy crossbow where the front sight often get lost. The model is easily 3D-printable with built-in break-away support structures.
It should fit most variations of this toy weapon. The source CAD file is also provided so that changes can easily be made.
• Download the STL file
• 3D print it
• Remove the support structure with wire cutters or a sharp knife. (don't cut yourself!)
• Place it on the front of your crossbow
• Start shooting strait :)
Download the 3D file from: www.thingiverse.com/thing:71846
3D-printed on a makerbot.creativetools.se
This 3D-file is the result of a project in which a 1000-year-old Viking belt buckle was laser scanned and 3D printed to achieve a copy of the unique archaeological artifact.
You can read the full article about this project via the URL below.
www.creativetools.se/3d-utskrifter-3d-skrivare/11182-3d-s...
Feel free to share this 3D object and the contents of the article under the Creative Commons Attribution-Share Alike 3.0 Unported license.
This 3D-file is the result of a project in which a 1000-year-old Viking belt buckle was laser scanned and 3D printed to achieve a copy of the unique archaeological artifact.
You can read the full article about this project via the URL below.
www.creativetools.se/3d-utskrifter-3d-skrivare/11182-3d-s...
Feel free to share this 3D object and the contents of the article under the Creative Commons Attribution-Share Alike 3.0 Unported license.
This 3D-file is the result of a project in which a 1000-year-old Viking belt buckle was laser scanned and 3D printed to achieve a copy of the unique archaeological artifact.
You can read the full article about this project via the URL below.
www.creativetools.se/3d-utskrifter-3d-skrivare/11182-3d-s...
Feel free to share this 3D object and the contents of the article under the Creative Commons Attribution-Share Alike 3.0 Unported license.
This 3D-file is the result of a project in which a 1000-year-old Viking belt buckle was laser scanned and 3D printed to achieve a copy of the unique archaeological artifact.
You can read the full article about this project via the URL below.
www.creativetools.se/3d-utskrifter-3d-skrivare/11182-3d-s...
Feel free to share this 3D object and the contents of the article under the Creative Commons Attribution-Share Alike 3.0 Unported license.
The sturdy Flashforge Dreamer FFF type 3D printer with dual print heads.
For more information please visit flashforge.creativetools.se
A fully 3D-printable rotating stand for filament spools, designed to be easily made without the need for fasteners such as screws, nuts, shafts, glue, etc. Every single component in this spool holder comes right from your 3D printer's filament.
The spool holder's spindle is shaped to fit the vast majority of commonly used filament spools with shaft holes ranging from 16 mm to 62 mm in diameter. It is also compatible with spool-less filament coils.
The spindle which holds the spool's weight rotates on its own roller wheels, which makes it turn effortlessly.
The spool holder included an arm for filament guide tubes of both common sizes 1.75 mm and 3.0 mm. The arm also contains a pocket for inserting a piece of sponge which acts a a filament filter - thus keeping the filament clean and lubricated.
FEATURES
- Easy to 3D print
- Needs no glue or fasteners
- All parts can be 3D-printed
- Fits almost any filament spool size
- Has built-in filament filter!
- Can also hold spool-less filament coils
Next time you need a new filament spool holder, just 3D-print one! :)
INSTRUCTIONS
Please see video youtu.be/X6ArZeWYSZE
"Creative Tools
This small accessory can protect your FFF 3D printer filament from two common issues - cleaning and lubrication.
A sponge wipes the filament clean from any dust particles and prevents them clogging the extruder.
By dropping a few drops of common mineral oil on the sponge the filament passing through gets lubricated thus relieving the extruder motor from strain.
Lubrication is specially useful if the filament needs to travel through long tubes before it enters the extruder.
INSTRUCTIONS
Download the STL-file from www.thingiverse.com/thing:492067
3D-print the provided STL file and insert a small piece sponge into the filament filter.
Poke a hole into the sponge and make sure the filament passes through and comes out at the other end.
Soak the sponge with a few drops of mineral oil (as for sewing machines, door hinges or bicycle chains).
Place the filament filter somewhere in between the spool and the extruder. If you have a plastic tube which guides the filament to extruder (such as a bowden solution) make sure you place the filter before the filament enters the tube.
See video for more information
By Creative Tools
The Wanhao Duplicator 5S Desktop 3D Printer. A large format high quality FFF (Fused Filament Fabrication) type 3D printer.
English
3D model of a missile ramp 3D printed on a ZPrinter. Image is taken with a PackshotCreator photo studio by Creative Tools AB.
Swedish
3D-modell av en missilramp 3D-utskriven på en ZPrinter. Bilden är fotograferad med en PackshotCreator fotostudio av Creative Tools AB.
3D-printed on a MakerBot Replicator 2 FFF 3D printer (makerbot.creativetools.se) with PLA plastic filament.
Download the model from www.thingiverse.com/thing:68880
The 3D printer: makerbot.creativetools.se
The 3D file: www.thingiverse.com/thing:139268
This adjustable wrench is 3D-printed in one single go and the support parts are easy to break away and remove.
This model of Yoda in Voronoi structure was 3D printed on a Replicator 2 3D printer with pink PLA plastic filament.
The 3D printer: makerbot.creativetools.se
The 3D model: www.thingiverse.com/thing:44505