View allAll Photos Tagged CreativeTools
The 3D printer: makerbot.creativetools.se
Original 3D model: www.thingiverse.com/thing:9456
Derived 3D model: www.thingiverse.com/thing:147050
Toy crossbow replacement sight for popular suction cup arrow toy crossbow.
This is a spare part for a popular toy crossbow where the front sight often get lost. The model is easily 3D-printable with built-in break-away support structures.
It should fit most variations of this toy weapon. The source CAD file is also provided so that changes can easily be made.
• Download the STL file
• 3D print it
• Remove the support structure with wire cutters or a sharp knife. (don't cut yourself!)
• Place it on the front of your crossbow
• Start shooting strait :)
Download the 3D file from: www.thingiverse.com/thing:71846
3D-printed on a makerbot.creativetools.se
Toy crossbow replacement sight for popular suction cup arrow toy crossbow.
This is a spare part for a popular toy crossbow where the front sight often get lost. The model is easily 3D-printable with built-in break-away support structures.
It should fit most variations of this toy weapon. The source CAD file is also provided so that changes can easily be made.
• Download the STL file
• 3D print it
• Remove the support structure with wire cutters or a sharp knife. (don't cut yourself!)
• Place it on the front of your crossbow
• Start shooting strait :)
Download the 3D file from: www.thingiverse.com/thing:71846
3D-printed on a makerbot.creativetools.se
The 3D model: www.thingiverse.com/thing:69491
The 3D printer: makerbot.creativetools.se
For more information creative-tools.com
English
Image of a box of microwave popcorn taken with a PackshotCreator photo studio by Creative Tools AB.
Swedish
Produktbild av en låda mikrovågspopcorn tagen med en PackshotCreator fotostudio av Creative Tools AB.
The MakerBot Digitizer 3D-scanned Laser Cat model was used in this test of different layer thicknesses. The cat was scaled down to 50 mm in height and then 3D printed at the following layer heights:
- 0.40 mm (400 microns)
- 0.30 mm (300 microns)
- 0.20 mm (200 microns)
- 0.10 mm (100 microns) - Average width of a strand of human hair
- 0.05 mm (50 microns)
- 0.02 mm (20 microns)
All six cats where 3D printed on a MakerBot Replicator 2 with TRUE BLUE PLA plastic at 230 degrees C.
All layers where 3D printed with MakerWare's standard values as follows:
(400 microns) - 15% infill - perimeters 2 - speed 90 mm/s
(300 microns) - 15% infill - perimeters 2 - speed 90 mm/s
(200 microns) - 15% infill - perimeters 2 - speed 90 mm/s
(100 microns) - 15% infill - perimeters 2 - speed 90 mm/s
(50 microns) - 15% infill - perimeters 2 - speed 60 mm/s
(20 microns) - 15% infill - perimeters 2 - speed 40 mm/s
---
The 3D scanner: bit.ly/1a7y8hG
The 3D printer: makerbot.creativetools.se
The 3D model: www.thingiverse.com/thing:146265
The Wanhao Duplicator 5S Desktop 3D Printer. A large format high quality FFF (Fused Filament Fabrication) type 3D printer.
This image shows a simple shape as a test for 3D printing support materials with a MakerBot 3D printer.
A 3D printed handle for securing a needle or thin wire while unclogging a jammed printhead nozzle.
The 3D printer: makerbot.creativetools.se
The 3D file: www.thingiverse.com/thing:99969
We designed this castle playset as a concept for demonstrating toy manufacturing at home using a 3D printer.
You can download all STL files free of charge and read more about the project at 3DCastlePlayset.creativetools.se.
VIDEO:
A 3D printable grip and lens cover for the ASUS XTION motion sensing hardware which is very affordable and popularly used as a hand-held 3D scanner.
- www.thingiverse.com/thing:126936
- www.instructables.com/id/EI6NW7FHPWBYIDB/
The 3D scanner: bit.ly/1bBmlMq
The 3D printer: makerbot.creativetools.se
The 3D model: www.thingiverse.com/thing:126936
This video shows the bee of the BEEVERYCREATIVE logotype 3D-printed as several individual parts in four different colours. These where then assembled together.
For the majority of commonly 3D printed items this has the following advantages compared to dual and triple-nozzle 3D printers.
- The results yield better quality
- No oozing and colour-smearing problems
- One can use unlimited number of colours (not only two or three)
- A single-nozzle 3D printer always uses the full range of the maximum build volume
- An interrupted 3D print only affects a small portion of the total print time
- No considerable extra 3D modelling overtime needed since multi-nozzle 3D prints also require individual STL files for each colour
For more information on this 3D print and the BEETHEFIRST 3D printer, visit beeverycreative.creativetools.se and youtu.be/vKgeOvcRBpc
The 3D model of this bee was made into several parts in Rhino 3D for Mac OS X. Each part was saved to an STL file and 3D printed a different colour. The where designed to snap-fit to each other.
The jolly music for this video borrowed from:
3D-printed on a MakerBot Replicator 2 FFF 3D printer (makerbot.creativetools.se) with PLA plastic filament.
Download the model from www.thingiverse.com/thing:68880
ENGLISH
These images show the unboxing and setup of the MakerBot Replicator 2 personal 3D printer.
SVENSKA
Dessa bilder visar uppackningen och igångsättning av MakerBot Replicator 3D-skrivare.
The MakerBot Digitizer 3D-scanned Laser Cat model was used in this test of different layer thicknesses. The cat was scaled down to 50 mm in height and then 3D printed at the following layer heights:
- 0.40 mm (400 microns)
- 0.30 mm (300 microns)
- 0.20 mm (200 microns)
- 0.10 mm (100 microns) - Average width of a strand of human hair
- 0.05 mm (50 microns)
- 0.02 mm (20 microns)
All six cats where 3D printed on a MakerBot Replicator 2 with TRUE BLUE PLA plastic at 230 degrees C.
All layers where 3D printed with MakerWare's standard values as follows:
(400 microns) - 15% infill - perimeters 2 - speed 90 mm/s
(300 microns) - 15% infill - perimeters 2 - speed 90 mm/s
(200 microns) - 15% infill - perimeters 2 - speed 90 mm/s
(100 microns) - 15% infill - perimeters 2 - speed 90 mm/s
(50 microns) - 15% infill - perimeters 2 - speed 60 mm/s
(20 microns) - 15% infill - perimeters 2 - speed 40 mm/s
---
The 3D scanner: bit.ly/1a7y8hG
The 3D printer: makerbot.creativetools.se
The 3D model: www.thingiverse.com/thing:146265
The Wanhao Duplicator 5S Desktop 3D Printer. A large format high quality FFF (Fused Filament Fabrication) type 3D printer.
3D-printed on a MakerBot Replicator 2 FFF 3D printer (makerbot.creativetools.se) with PLA plastic filament.
Download the model from www.thingiverse.com/thing:68880
English
3D model of an alien head modelled by Daniel Hastegård and 3D printed on a ZPrinter. Image is taken with a PackshotCreator photo studio by Creative Tools AB.
Swedish
3D-modell av ett alienhuvud skapat av Daniel Hastegård och 3D-utskriven på en ZPrinter. Bilden är fotograferad med en PackshotCreator fotostudio av Creative Tools AB.
A 3D printed handle for securing a needle or thin wire while unclogging a jammed printhead nozzle.
The 3D printer: makerbot.creativetools.se
The 3D file: www.thingiverse.com/thing:99969
The 3D printer DeeGreen from be3D. Fully enclosed build environment and filament storage provide a quiet and safe 3D printer. Easily removable magnetic build platform and touchscreen makes the DeeGreen a reliable quality 3D printer.
The treefrog 3D model in picture is by MorenaP, see
3D-printed on a MakerBot Replicator 2 FFF 3D printer (makerbot.creativetools.se) with PLA plastic filament.
Download the model from www.thingiverse.com/thing:68880
The 3D printer DeeGreen from be3D. Fully enclosed build environment and filament storage provide a quiet and safe 3D printer. Easily removable magnetic build platform and touchscreen makes the DeeGreen a reliable quality 3D printer.
A 3D printed handle for securing a needle or thin wire while unclogging a jammed printhead nozzle.
The 3D printer: makerbot.creativetools.se
The 3D file: www.thingiverse.com/thing:99969
The 3D printer: makerbot.creativetools.se
Original 3D model: www.thingiverse.com/thing:9456
Derived 3D model: www.thingiverse.com/thing:147050
Made on a makerbot.creativetools.se
www.thingiverse.com/thing:61909
Grey PLA plastic at 0,1 mm per layer
This is the splendid 3D-printable small toy car made by LeFabShop.
The 3D-model: www.thingiverse.com/thing:359008
The 3D-printer: makerbot.creativetools.se
The 3D printer DeeGreen from be3D. Fully enclosed build environment and filament storage provide a quiet and safe 3D printer. Easily removable magnetic build platform and touchscreen makes the DeeGreen a reliable quality 3D printer.
The treefrog 3D model in picture is by MorenaP, see