View allAll Photos Tagged AFOL
This shows the pilot in the mech lifting up some pallets.
It’s arms are able to lower to the ground to pick up crates/pallets, and lift them high above its head.
It’s manufactured by the yellow jacket corporation.
Lego gunship for my series "The Polaroid War". Gunship is detachable in four main components; quad engines, cockpit, and two ion laser cannons. Fits one pilot in the cockpit.
The Allied Space Force requires each ship to carry special small spacecrafts for repair. This is to allow them to quickly recover from the inevitable battle damage and carry out their mission.
Here's my Scorpion Tank build from the Halo series.
It's design is a mixture of the ones featured in Halo 3 and Halo: Reach.
Its features:
- A 360° rotatable main cannon that can be angled up to vertical.
- 4 independently movable track sections with suspension.
- A movable front mounted machine gun.
- Access to the inside driver position, via a hatch behind the machine gun.
www.flickr.com/photos/origin-of-the-brick/5105836667 was my inspiration for this build.
More Halo builds to come soon!
First Render of the Big E with her flight deck fully loaded for strike operation - from bow to stern: squadron of 10 Hellcats; squadron of 6 Avengers (note their noticably larger wingspan and size); squadron of 6 Dautlesses, and two more strike squadrons with their wings folded.
In terms of my progress, I'd like to think that the exterior is mostly finalized however more work is needed for the hanger deck(yes there is one :)) and internal frame.
Piece count at the moment is just under 10,000 (the planes added a lot of smaller pieces) but I am looking to hopefully reduce that by 5-10% once I get to optimize the interior.
Displacement: 19,800 t (as built); 21,000 t (1943 refit); 32,060 t (full load)
Length: 809.5 ft (as built); 830 ft (1943) - (160 studs)
Beam: 114 ft (flight deck widest) - (22 studs)
Crew: 2,200+
Armament (1943): 8 × 5 inch dual purpose naval guns; 40 × 40mm Bofors; 50 × 20 mm Oerlikon
Carrier Air Group (1943) - 94 Total: 38 x F6F-3 Hellcat Fighter; 18 x TBF-1 Avenger Torp Bomber; 38 x SBD-5 Dauntless Dive Bomber
Thank you all for the feedback recently on my Mistel head design. When I place in both design heads in the main body and both look awesome in their own way. Which one does attracted to you first?
Displacement: 6,800 t
Length: 541.5 ft (107 studs)
Beam: 53 ft (13 studs)
Crew: 673
Armament: 16 × 5 inch 38 cal dual purpose naval guns; 12 x 1.1 inch 75 cal AA guns; 8 × 20 mm Oerlikon; 8 x 21 inch torpedo tubes
Bricklink:
www.bricklink.com/v3/studio/design.page?idModel=163994
Hi all, hope everyone is staying safe and healthy.
This is an updated version of the 1:200 Atlanta moc I uploaded several months ago on bricklink (older version): www.bricklink.com/v3/studio/design.page?idModel=138030
I tried my best to improve the accuracy of my previous moc and added various details to the model. I made a breakdown of most of the changes which is detailed in pic 5 and 6
I also added enough internal structures to make the above-waterline hull easily separable from the below-waterline keel, so it can be displayed as a waterline model
I want to thank everyone who provided feedbacks on my previous model and would welcome any additional feedbacks!
The MPM60 Multi-Purpose-Manipulator was my entry into the Bricklink designer contest. I wanted to build something that looked visually intersting and had several play features but that also invoked a sense of nastalgia from several of the older Lego lines. In particular, the arm and the containers were the main features of a number of older space and underwater themes and I thought that they still worked with the new design.
I had also just started looking at Paul Pepera's designs and the "inflatable" and utilitarian look came from that. This was the first ship I made that actually fit with hard-scifi and from here I went on to make all of the other models. The Guppy (one image back ->) has the same base but I changed the tank under the engine and balanced the colors and added new attatchments.
Congradulations to all the winners. There are some great models there!
I've designed this build for the LEGO IDEAS Contest. If you want to support it and see more photos ➡️
ideas.lego.com/challenges/db24a4fd-26ed-48c2-9408-8cd885f...
Thanks for supporting my project 🙏😀
Architecture is expressed in many different ways around the world. For thousands of years, human kind has been inventing construction techniques to build and develop civilizations.
With my creation "Architecture Inspiration", I wanted to express ancient, contemporary or futuristic achievements from different cultures and eras. I also took care to vary the colours, region of world and types of architecture. These architectural achievements are built with LEGO bricks in a vintage photo format, as if we had taken a real photo of the building.
This creation could become a decorative puzzle for lovers of architecture, design and history
The adventurers fight their captors, and escape the abandoned house.
“The Golden Key” MOC series, full story and more pictures on www.instagram.com/bryckland
A breakdown of my latest MOC, the Jackknife Gunship. Because I cannot "stack" the photos into a single post on Flickr, I've uploaded the first here and put the rest on Instagram. You can find the full details here.
Here's my eleventh build in my Iron Builder round against Dicken Liu with the navy blue tool box as the seed part. This entry uses 9 of the seed part.
A spaceship was one of my first ideas, as I had built one similar to the lower spaceship a few years back with the classic space tool box . I made a new version of the old one at the very start of the competition, but it felt a little bit underdeveloped for Iron Builder. Well, I added a larger ship to go with it and tried to take/make the best picture I could (Credit to NASA for the space picture I adapted for the background), and it may not be my best entry, but I'm happy enough to post it.
This mushroom cottage is the home of Glurp the Gnome. There he lives in harmony with animals, plants and nature. Inside the cottage he has a sleeping loft, fireplace and a candle lit corner where he can sit in a comfy chair and read the newspaper.
First in a few Halloween builds hopefully, have a new smoke machine so trying to get some creepy pics, but not as easy as I had hoped. Happy Halloween :F
Let me introduce my new upgraded mecha AMS FS111 Führungsmaschine Mark III “JUNKER” from MKII "Mistel". Still in W.I.P though at 90%
Microscale version of Lego set 6372 ’Villa’ from 1982 (52 parts). Created for the most recent Tartan LUG building challenge.
This Steen Sig Andersen designed house was a childhood favourite and the striped canopy is such a nostalgic detail I taught myself to use PartDesigner especially. I think the sticker/decal really helps make this model instantly recognisable.
Copyright © Stewart Lamb Cromar 2021 CC BY-NC-SA
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
After two previous design of Scara Therium series I have redesign the latest version for "Stug” Scara Therium IAD ST111 MarkIII.
Arms with it's main long barrel gun, multiple rocket launcher, secondary weapon which is a gatling guns located below the cockpit pilot and attach with two multipurpose elongated hands.
Design for a closed quarter design in an urban area and Closed Combat Attack (CCA) against hostile targets that are in close proximity. The overhaul design is smaller cockpit in the upper body and shorter height to prevent easy target.
Attach with is a detachable skirting amour placing in the knee for frontal protection and also at the back as well against any HE and AP HE shell to minimize their effect.
#bmdhot
A lineup showing the changing standard combat uniforms of the Terrastralian/West Terrastralian Army. L-R: Pattern '51 (1951-1972); ODU (1972-1994); W/S-9 BDU (1994-Present); M12 BDU (2009-Present)
This is my attempt at creating an apple snail. These are large freshwater snails that can be found in many parts of the world. I used to have one of these in my home aquarium and they are endlessly fascinating. This guy will end up as a feature in a new model I hope to be building soon.
Showing off the shoulder gimmick - the entire shoulder is able to slide outwards to allow for more articulation.
Few days ago I saw PleaseYesPlease's fantastic VW T1 Single Cab and loved it. I always wanted to build one, but this last weekend got me really motivated when I saw this Volkswide by Robert Design.
I tried to capture the overall shape and with my limited teal parts I like how it turned out. Will definitely modify it more in future, once I got the right parts. Usually all my car build attempts fail, but this one I'll keep :)
Taketime Island is located in the sunny archipelago, where life is harmonic and relaxing. Here you find a bakery, café and diving club. You might also notice the old sailor staring longingly at the horizon or the beginning romance between the café worker and her customer (or the jealous man spying on them through the window...)
I posted this around one hour ago, but I had to change to colour of the shoulders. I put a red 1x2 slope instead of blue,
and it was annoying me, sorry.
Instructions: www.youtube.com/watch?v=M6fkir6214k