View allAll Photos Tagged 4x32

The MK26 essentially, with a built in 4x32 advanced combat optic designed after the SUSAT scope, accompanied by a 2x magnification mini red dot for CQB, if the situation calls for it. with its compact bullpup design, the barrel is fit to be on a precision sniper rifle, but with the power of an assault rifle.

The T-82 ASW [advanced support weapon]

is designed to mow down tangos, and make sure that whatever it see's, is going down. chambered 7.62, this beast is not just destructive, but accurate with its B.E.A.S.T optic scope 4x32-5x50 magnification. also capable of NV and thermal.

The Marksman kit consist of a cold forged barrel made to match grade specs, a bi-pod, and a custom pistol grip.

 

Cost: 950$ USD.

 

The UCOG MK.1 is a sight that has 4x32 magnification, a red dot type reticule using a fiber optic rod, and integrated night vision features.

 

Cost: 550$ USD.

 

Ten round magazine

 

Cost: 25$ USD.

Here's the DMR version of this awesome series: she's the fourth of seven guns in total.

 

She is a 5.56x45, full fixed stock, semi auto (or full auto :3) sniper rifle, equipped with a 4x32 enhanced zoom scope

 

Again, 3 more to come :D

Wylee, thank you yet again for your grip =D

 

Feel free to note and comment.

Amy

Here are the available attachments for the "Lotus"

 

#1 The Type-3 Satori V.R.S.S

 

The "Satori" Variable Range Smart Scope is made to connect to Electronic eyepieces, Helmet Visor HUDs, or Smart AR goggles. The housing is made of forged aluminum alloy and the Targeting OS has 3.8 gigs of RAM and the battery can run for 2 days on low settings.

 

The sight magnification and objective sizes are 4x32

 

#2 Type-10 ''Akaten'' IR L.A.M

 

Run-of-the-Mill Laser Aiming module, battery last 2 days

 

#3 Type-33 "Whumper" 30mm Under-slung grenade Discharger

 

Simple single shot grenade launcher.

 

(Sold separately from main weapon.)

 

[Here is a tacticool version guys. ;3 ]

 

And we are Hiring, PM me or Deadpool for more info.

Saab JAS 39 Gripen (Griffin) - Multirole Fighter Aircraft

Zen Magnets - Neodymium Magnetic Balls (@1233)

 

This original design is based off of this brilliant reference aircraft.

www.militaryfactory.com/aircraft/detail.asp?aircraft_id=67

 

This is my entry into the Zen Magnets Contest #79: Unlimited Zen Aircraft (May 2020) ... contest.zenmagnets.com/79-unlimited-aircraft/

 

Build was constructed using @1233 Zen Magnets and consisted of a tapered cylindrical Fuselage, rear Delta Wings, Tail Fin + Engine, front Canard Wings, and pilot Cockpit.

 

The challenge was to achieve the distinctive Canard shape with the limitation of certain magnet angles and tricky mix of duo coupled/parallel magnetic alignments.

 

(@525) - Fuselage - (4x32 core)+(4x(1+29+1) sides)+(4x(7) spacers @2)+(2 nose tip)+(2x(1+23) side intake)+((5x(4+10))+4 rear engine)+(1+(2x30) top trim)+(2x25 wing/fuselage side trim)

 

(@474) - Rear Delta Wings - 2x((1+(2x15) inside) + (1+(2x13)+1) + (2x13) + (1+(2x10)+1) + (2x10) + (1+(2x7)+1) + (2x7) + (1+(2x4)+1 tip) + ((1+(2x9)+1)+(1+(2x4)+1) under wing mounts) + (2+(2x(2x8))+2)+4(riser) missile mount)

 

(@125) - Tail Fin - (1+(2x8)+1 base)+(2x8) + (1+(2x6)+1) + (1+(2x6)) + (1+(2x5)+1) + (1+(2x5)) + (1+(2x4)+1) + (1+(2x4)) + (1+(2x3)+1) + (1+(2x3)) + (1+(2x2)+1)+(1 bottom fuller)

 

(@078) - Front Canard Wings - 2x((1+(2x3)+1 base)+(1+(2x3)+1)+(1+(2x3))+(1+(2x2)+1)+(1+(2x2)+1 tip)+(2x2 riser))

 

(@031) - Cockpit - (1+(2x6)base) + (1+(2x2)+1) + (2x6 strands = side accents)

======

(@1233) Total

 

IMG_20200525_153123

Made this a month ago. Time to release it.

FDE version coming soon!

Code - BLK: pastebin.com/RPHb0Rji

Code - FDE: pastebin.com/VuzUryqG

 

Enjoy my work and please give proper credit.

 

Yeehaw - a.k.a. - Slippy Pasta

 

Its a SMK19-18,.22cal air rifle with a hawke sport HD 4x32 scope

Updated airsoft loadout.

Thanks to Christmas, here's what I've updated/added:

-Bates Durashock boots

-PASGT helmet with LWH chin strap and pad suspension system.

-Issue MARPAT helmet cover

-Coyote Brown mag pouches

 

As for upgrades to my gun:

-Metal receiver

-AIM "super upgraded" M130 gearbox

-G&P 1-piece metal hop-up chamber

 

Things still needed:

-MOSFET (for 3-round burst setting)

-B-2 4x32 ACOG (received)

-9.6v 3600mAh battery

-Possibly a G&P AN/PEQ2

-40" gun bag/case (received)

-CamelBak (ordered)

-Ajax Customs STS

-OD flight gloves

   

an AK47 with a quadstacked mag, grip-pod, recoil reducing stock, 4x32 sight, and a magpul MIAD grip with adaptor

Custom Case Mount made from a Hobby Lobby car case and fashioned metal plate bent at an angle to fit a larger build into a smaller case. Metal plate covered with black paper.

 

Saab JAS 39 Gripen (Griffin) - Multirole Fighter Aircraft

Zen Magnets - Neodymium Magnetic Balls (@1233)

 

This original design is based off of this brilliant reference aircraft.

www.militaryfactory.com/aircraft/detail.asp?aircraft_id=67

 

This is my entry into the Zen Magnets Contest #79: Unlimited Zen Aircraft (May 2020) ... contest.zenmagnets.com/79-unlimited-aircraft/

 

Build was constructed using @1233 Zen Magnets and consisted of a tapered cylindrical Fuselage, rear Delta Wings, Tail Fin + Engine, front Canard Wings, and pilot Cockpit.

 

The challenge was to achieve the distinctive Canard shape with the limitation of certain magnet angles and tricky mix of duo coupled/parallel magnetic alignments.

 

(@525) - Fuselage - (4x32 core)+(4x(1+29+1) sides)+(4x(7) spacers @2)+(2 nose tip)+(2x(1+23) side intake)+((5x(4+10))+4 rear engine)+(1+(2x30) top trim)+(2x25 wing/fuselage side trim)

 

(@474) - Rear Delta Wings - 2x((1+(2x15) inside) + (1+(2x13)+1) + (2x13) + (1+(2x10)+1) + (2x10) + (1+(2x7)+1) + (2x7) + (1+(2x4)+1 tip) + ((1+(2x9)+1)+(1+(2x4)+1) under wing mounts) + (2+(2x(2x8))+2)+4(riser) missile mount)

 

(@125) - Tail Fin - (1+(2x8)+1 base)+(2x8) + (1+(2x6)+1) + (1+(2x6)) + (1+(2x5)+1) + (1+(2x5)) + (1+(2x4)+1) + (1+(2x4)) + (1+(2x3)+1) + (1+(2x3)) + (1+(2x2)+1)+(1 bottom fuller)

 

(@078) - Front Canard Wings - 2x((1+(2x3)+1 base)+(1+(2x3)+1)+(1+(2x3))+(1+(2x2)+1)+(1+(2x2)+1 tip)+(2x2 riser))

 

(@031) - Cockpit - (1+(2x6)base) + (1+(2x2)+1) + (2x6 strands = side accents)

======

(@1233) Total

 

PXL_20201108_190914312.PORTRAIT-01.COVER

LAB4Tech Predator R-s DTRS

OLCON Variab TS 1x:4x32

with

B&S STHGT-2

B&S LAS 4x32

The Armat/Babalas Ordnance M41 A2 Pulse Rifle. Updated from the previous model to include an accessory rail for scopes, lazers, and other accessories. A suppressor can also now be mounted.

 

The basic model, with no scope attached. Traditional iron sights can be attached to the rail if required. Close range iron sights are attached as standard to the top of the M220 4X32 optical scope for close in fighting.

~2085

 

Produced by Tricorp Firearms, the .357 Spinaliser is a revolution in enforcement and policing firearms. Heavy by submachine-gun standards, and with a long barrel, the Spinaliser controls the fast-firing .357 kick easily. Designed for use by peacekeeping officers, the Spinaliser is sure to put down any bandit as efficiently as possible, as is the Tricorp way. This current setup utilises a 16" barrel, 36 round magazines, a low-profile fixed stock, bipod, and the latest Tricorp 1.5-4x32 telescopic gunsight. Rounds are ejected through the right side, in a forward fashion to improve ambidextrous performance. The gas piston firing system is fully adjustable to allow the cycling of various loads, and is positioned as far forward as possible to aid softer shooting.

 

-----------------------------

 

As always, praise and criticisms are welcome, I prefer comments telling me how to improve than favourites, but that's not saying I don't want them. Why not give both? :3

 

I also feel like doing a massive load of parts packs soon, is the scope on this gun good enough?

This specialty weapon was created, manufactured, and licensed by N.E.R Co.

 

Name: Night Ops - Desert Carbine

Caliber: 5.56 x 45mm NATO (specially made sub-sonic rounds)

Optic: Magpul MBUS front & rear folding / Trijicon ACOG 4x32 /w Night Mod

Stock: SOPMOD Crane Stock /w Fixed Mod

 

The most noticeable part of this firearm are the scope & rail system. The scope is your standard Trijicon ACOG 4x32, however the Night Mod on this particular model boasts a new 8-Way directional gun fire locator which is shown by dim-lit LED's on the outer rim of the inside of the scope. The rail system is made of an indefinitely lighter carbon polymer compound, and has a newer stylish "spine" look to it. A truly revolutionary change to the dangers of night-time warfare.

I bought this (My first!) .25 Supersport on saturday last, Also acquired the Edgar Brothers 20x42 scope and Simmons Master Series Prohunter 3-10x44 on the same day along with three high quality rifle slips!!

 

Saturday was good to me!! :)

 

Almost forgot, A Kassnar 4x32 came with the rifle!!

Tokyo Marui HK G3 with bipod, green laser & 4x32 scope

Hk G36 with folding stock noise suppressor

Credit to: EagleMalkavian // Pyrrhic Pteric for the ergo stock

Credit to : [OC]Dukeleto - mentor for the harris bipod

Credit to : URBANrecon - Valkyrie Rifleworks for the mbus sights

 

specs of the rifle:

external: G&P acog 4x32 with op reddot

ergo f93 stock ( in tan )

magpul moe pistol grip

magpul mbus sights

ergo rail covers

dboys harris style bipod

tokyo marui silencer ( deactivted tracer )

king arms bio hazard b metal body

madbull daniel defence omega 12inch rail

mag brand short vn style 130 round mags

 

Internall:

king arms full gearbox POM

classic army spring m90 ( gun shoots 355-359 fps )

tokyo marui eg1000 motor

madbull python 6.03mm thightbore inner barrel 363mm long

king arms 60degree hop up bucking and nub

king arms hop up unit

deans in the buffertube

 

guns shoots at 355-360 fps and it has a 25 rounds per second with a 7.4volt 1200mah 20c lipo battery

 

This is the Armalite AR-7 Explorer 22 Caliber rimfire with a Barska Plinker-22 4x32 scope. I modified it with a replacement barrel, 16 round flip magazine, cantilever scope mount, and pistol grip stock from AR7 Industries. I'm not particularly impressed with the rifling of the barrel. They more closely resemble scratches rather than rifling. The original barrel had similar rifling, so I am not expecting a whole lot of improvement in accuracy, but it does look a little more impressive. The barrel did require a little fitting in order to get the barrel to attach to the receiver. Seemed it was a really tight fit requiring removal of some metal with sandpaper in order for it to slide into the receiver properly.

This is just some simple custom parts I made when I was bored. Features a AK Buffer Tube Clamp, Custom Mag, M1LS Laser, and a 4x32 BPA Scope.

If used please credit me, have fun and enjoy.

pastebin.com/kwreXGbN

credit to

Kevintk - Father of Sweetwater asap plate

[OC]Dukeleto - mentor harris bipod

EagleMalkavian // Pyrrhic Pteric ergo stock

Shockwave • PMG Tournament Winner kac foregrip

  

well i got some new parts for it

 

specs of the rifle:

external: cm acog 4x32 with op reddot

ergo f93 stock ( in tan )

magpul moe pistol grip

rearsight of some sort

dboys front spr sight

dboys harris style bipod

g&p m16a2 frontset

king arms bio hazard b metal body

madbull daniel defence omega 12inch rail

mag brand short vn style 130 round mags

dboys kac foregrip

 

Internall:

king arms full gearbox POM

prometheus m100 ( gun shoots 355-359 fps )

tokyo marui eg1000 motor

tokyo marui 509mm innerbarrel 6.08

king arms 60degree hop up bucking and nub

king arms hop up unit

deans in the buffertube

 

shoots about 18rps now on a 7.4v lipo and 23 on a 11.1v but it has a lot better range about 60-70 meters

  

I apologise for the poor definition of the image, but I just wanted to update everyone (if anyone still looks at this feed...)

 

Next things to get would be a Guarder Recoil Pad (for the stock), a slightly different flash hider, a 4x32 TA01 ACOG, and possibly a G&P Storm [pistol] grip (though that's not 100% necessary - but would make it more kosher)

 

Let me know what you guys think. As far as mags go, I run 30rd G&G low-cap mags and 75rd Magpul PTS EMAGS. I've got a more versatile Magpul MS3 sling coming in the mail, so when that arrives, or I update this more significantly, I'll upload another picture.

 

That's it for now folks, hope everyone is well!

 

- Fred

Custom Case Mount made from a Hobby Lobby car case and fashioned metal plate bent at an angle to fit a larger build into a smaller case. Metal plate covered with black paper.

 

Saab JAS 39 Gripen (Griffin) - Multirole Fighter Aircraft

Zen Magnets - Neodymium Magnetic Balls (@1233)

 

This original design is based off of this brilliant reference aircraft.

www.militaryfactory.com/aircraft/detail.asp?aircraft_id=67

 

This is my entry into the Zen Magnets Contest #79: Unlimited Zen Aircraft (May 2020) ... contest.zenmagnets.com/79-unlimited-aircraft/

 

Build was constructed using @1233 Zen Magnets and consisted of a tapered cylindrical Fuselage, rear Delta Wings, Tail Fin + Engine, front Canard Wings, and pilot Cockpit.

 

The challenge was to achieve the distinctive Canard shape with the limitation of certain magnet angles and tricky mix of duo coupled/parallel magnetic alignments.

 

(@525) - Fuselage - (4x32 core)+(4x(1+29+1) sides)+(4x(7) spacers @2)+(2 nose tip)+(2x(1+23) side intake)+((5x(4+10))+4 rear engine)+(1+(2x30) top trim)+(2x25 wing/fuselage side trim)

 

(@474) - Rear Delta Wings - 2x((1+(2x15) inside) + (1+(2x13)+1) + (2x13) + (1+(2x10)+1) + (2x10) + (1+(2x7)+1) + (2x7) + (1+(2x4)+1 tip) + ((1+(2x9)+1)+(1+(2x4)+1) under wing mounts) + (2+(2x(2x8))+2)+4(riser) missile mount)

 

(@125) - Tail Fin - (1+(2x8)+1 base)+(2x8) + (1+(2x6)+1) + (1+(2x6)) + (1+(2x5)+1) + (1+(2x5)) + (1+(2x4)+1) + (1+(2x4)) + (1+(2x3)+1) + (1+(2x3)) + (1+(2x2)+1)+(1 bottom fuller)

 

(@078) - Front Canard Wings - 2x((1+(2x3)+1 base)+(1+(2x3)+1)+(1+(2x3))+(1+(2x2)+1)+(1+(2x2)+1 tip)+(2x2 riser))

 

(@031) - Cockpit - (1+(2x6)base) + (1+(2x2)+1) + (2x6 strands = side accents)

======

(@1233) Total

 

PXL_20201108_191341043.PORTRAIT-01.COVER

*My Precioussssss*

 

Market retail version of our latest weapons system, the Assault Rifle 54, called Blackbird. Builded with the newest Bullpup Recoil reducing Design, the AR-54 is the best Option for the success of your combat operations.

 

Content of this Solution:

- 1 Kyshira Arms AR-54

- 1 Kyshira Arms 4x32 Scope "Melter Series"

- 1 Pair of licensed SPW Iron Sights

- 1 Zombatt Tigris MFD-55 Flashider

- 1 licensed Magpul P-MAG magazin Cal. 6,8 SPC

- Zombatt Nightwatch 3 Direction Foregrip

 

Changes on the Stock, more Space for the Main Hand.

 

-Thanks:

SPW Woitek alias Amy - Iron Sights

Badenian - the Font of Fire Selection, Fonts

U.S. Marines in Afghanistan.

1st Battalion 2nd Marine Expeditionary Brigade.

 

-Gentex USMC Lightweight Helmet (LWH)

-USMC Reversible Marpat Helmet Cover

-NVG PVS-14 Night Vision Goggle Helmet Rhino Arm Mount

-ITT AN/PVS-14 NVG

-Oakley M Frame 2.0

-ESS Profile NVG Goggle

-USMC FROG Face Shield Balacavla

-Crye Precision USMC Desert Marpat Shirt

-Crye Precision USMC Desert Marpat Trousers

-5.11 Double Duty TDU Belt 1.5"

-Danner USMC RAT Temperate Military Boots

-Bijan Knee Pads CB

-Eagle Industries SPC CB

-Eagle Industries M4 Triple Mag Pouch MOLLE CB

-Eagle Industries Single Frag Grenade Pouch MOLLE CB

-USMC IFAk pouch CB

-Trijicon RCO 4x32 ACOG Pouch CB

-Speciality Defense USMC Magazine Dump Pouch MOLLE CB

-Source Tactical 3L

-North American Rescue USMC Combat Life Saving Kit CB

-Marconi Personal Role Military Radio and Headset

-Woodland Radio Pounch

-Safariland 6004 Self Locking System (SLS) Tactical Holster

-Mechanix TAA FastFit Gloves

-North American Rescue Combat Application Tourniquet (C-A-T)

-Light Stik

-Watch

-Carabiner

-USMC Bayonet & Scbbard

-M16A4 Rifle

-M1911 Pistol

-M67 Frag Grenade

-M18 Smoke Grenade

-Surefire M961XM07

-GPS02 Grip Pod

-M16 Magpul PMAG Magazine

-Pistol Magazine

-Trijicon 4x32 BAC ACOG/RMR

-Trijicon TA57 Tenebraex killFLASH

-Insight AN-PEQ16

-FGA Three Point Tactical Sling

 

© All rights reserved. Use without my permission is illegal.

Tokyo Marui HK G3 with bipod, green laser & 4x32 scope

Hk G36 with folding stock noise suppressor

Tokyo Marui HK G3 A3 with bi-pod, 4x32 scope and green laser.

CAR-15 M4 with adjustable stock, RIS system, red laser & green/red dor scope

MP5-PDW, foldable stock extended, red laser

G3 for open field game

M4 for field /CQB

MP5 for CQB

Sig Sauer pps as sidearm

Tokyo Marui HK G3 A3 with bi-pod, 4x32 scope and green laser.

CAR-15 M4 with adjustable stock, RIS system, red laser & green/red dor scope

MP5-PDW, foldable stock, red laser

G3 for open field game

M4 for field /CQB

MP5 for CQB

SIG Sauer Pistol

Type : SC01

Moteur : 4 temps 4 cylindres refroidi par air

Double arbre à cames en tête, 4 soupapes/cylindre

Cylindrée : 901 cm3

Alésage x course : 64.5 x 69 mm

Puissance : 95 ch DIN à 9000 tr/min - 69.8 kW DIN

Puissance administrative : 9 CV

Couple : 7.9 mkg à 8000 tr/min

Compression : 8.8:1

Lubrification : bloc moteur lubrifié sous pression, carter humide

Pont avant et boîte relai par barbotage séparé

Huile moteur : 4.5 litres SAE 10w40 ou 20w50

Poids du moteur : 92 Kg

Carburateurs : à dépression - 4x32 mm - Keihin VB51A

Échappement : 4 en 2

 

Démarreur : électrique, pas de kick

Batterie : 12 V / 14 Ah

Allumage : électronique type TCI, sans rupteur, avance centrifuge de 10° à 28.3°

Bougies : NGK DR8ES

Ordre d'allumage : 1-2-4-3

 

Cadre : double berceau tubulaire, berceau droit démontable

Direction : colonne sur roulements coniques

Angle de chasse/chasse : 61.5°/120 mm

Suspension avant : fourche avant ø 35 mm téléscopique à amortisseurs hydro-pneumatiques

Valve de gonflage sur chaque tube, débattement 160 mm

Suspension arrière : amortisseur FVQ hydraulique, réglable 30 positions, débattement 110 mm

Freinage AV : double disque 276x5 mm, étrier simple piston flottant : 38.15 mm

Freinage AR : simple disque 296x7 mm, étrier simple piston flottant : 38 mm

Roue AV/AR : Comstar 5 branches

Pneu AV/AR : tubless; av : 3.25V19, ar : 4.00V18

Empattement : 1515 mm

Longueur - hors tout : 2240 mm

Largeur au guidon : 795 mm

Hauteur aux instruments : 1125 mm

Hauteur de selle : 815 mm

Garde au sol : 150 mm

Poids à sec : 235 Kg

Poids total : 253 Kg

Capacité du réservoir : 15.5 L + 4.5 L de réserve

The CAMO Rocket .177 cal. Air Rifle is the latest model in the "Rocket" Series. Equipped with a 4x32 Air Rifle Scope that will ensure you precision accuracy and a power plant that will push a PBA Platinum pellet at 1250 fps! The Synthetic Stock has a Realtree Hardwoods Green HD® pattern for your ultimate camouflage.

Saab JAS 39 Gripen (Griffin) - Multirole Fighter Aircraft

Zen Magnets - Neodymium Magnetic Balls (@1233)

 

This original design is based off of this brilliant reference aircraft.

www.militaryfactory.com/aircraft/detail.asp?aircraft_id=67

 

This is my entry into the Zen Magnets Contest #79: Unlimited Zen Aircraft (May 2020) ... contest.zenmagnets.com/79-unlimited-aircraft/

 

Build was constructed using @1233 Zen Magnets and consisted of a tapered cylindrical Fuselage, rear Delta Wings, Tail Fin + Engine, front Canard Wings, and pilot Cockpit.

 

The challenge was to achieve the distinctive Canard shape with the limitation of certain magnet angles and tricky mix of duo coupled/parallel magnetic alignments.

 

(@525) - Fuselage - (4x32 core)+(4x(1+29+1) sides)+(4x(7) spacers @2)+(2 nose tip)+(2x(1+23) side intake)+((5x(4+10))+4 rear engine)+(1+(2x30) top trim)+(2x25 wing/fuselage side trim)

 

(@474) - Rear Delta Wings - 2x((1+(2x15) inside) + (1+(2x13)+1) + (2x13) + (1+(2x10)+1) + (2x10) + (1+(2x7)+1) + (2x7) + (1+(2x4)+1 tip) + ((1+(2x9)+1)+(1+(2x4)+1) under wing mounts) + (2+(2x(2x8))+2)+4(riser) missile mount)

 

(@125) - Tail Fin - (1+(2x8)+1 base)+(2x8) + (1+(2x6)+1) + (1+(2x6)) + (1+(2x5)+1) + (1+(2x5)) + (1+(2x4)+1) + (1+(2x4)) + (1+(2x3)+1) + (1+(2x3)) + (1+(2x2)+1)+(1 bottom fuller)

 

(@078) - Front Canard Wings - 2x((1+(2x3)+1 base)+(1+(2x3)+1)+(1+(2x3))+(1+(2x2)+1)+(1+(2x2)+1 tip)+(2x2 riser))

 

(@031) - Cockpit - (1+(2x6) base) + (1+(2x2)+1) + (2x6 strands = side accents)

======

(@1233) Total

 

IMG_20200525_152152

Name: MP5K Tactical

Type: Sub Machine Gun

Chamber: 9x19 Para Armored Piercing

Magazine: 15 round (3 included, hand load)

Attachments: MP5 Folding Stock, Tactical Flash light, Acog Red Chevron 4x32 scope, Suppressor, Rail Interface System (MP5)

Designer: Radar J. Prower & Heckler & Koch

Producer: Radar J. Prower's Custom Weapons

Fire system: Selective fire, Semi, Safety and Fully

Tokyo Marui HK G3 with bipod, green laser & 4x32 scope

Hk G36 with folding stock noise suppressor

My SVD with real wood and metal and a real-steel 4x32 POSP scope.

Tokyo Marui Aug Steyr & 4x32 scope and red laser, foldable froe grip

full stock & highly modified with M120 spring & high torque motor & steel gear box

Beretta Cx4 Storm Commando Eine attraktive Waffe in der Farbe Dark Earth Brown - mit Tactical ZF 4x32 TriTAC und Schiene zur Aufnahme von Zubehör, wie bei der Originalwaffe. Das Kettenmagazin verschießt 30 Diabolos so schnell, wie der Abzug betätigt wird. Eine 88 g CO2-Kapsel einschrauben, das Magazin laden, den Spannhebel betätigen und die Waffe ist schussbereit! Eine CO2-Füllung reicht für mehr als 200 Schuss. Achtung, neue Version mit geändertem Lauf (Mündungsbremse)! Es kann kein Schalldämpfer montiert werden.

The CAMO Rocket .177 cal. Air Rifle is the latest model in the "Rocket" Series. Equipped with a 4x32 Air Rifle Scope that will ensure you precision accuracy and a power plant that will push a PBA Platinum pellet at 1250 fps! The Synthetic Stock has a Realtree Hardwoods Green HD® pattern for your ultimate camouflage.

* AimPoint Red Dot Sight

 

*AGS 4x32 Mini Scope

 

Both sights zeroed at 25 yards

 

*Parker Hale MM2 Sound moderator (Silencer)

 

*Ruger 10/22 Stainless in Butler Creek folding stock. Stainless Weaver rail, Power Custom tuned trigger, titanium extended mag release. Picatinny accessories rail with vertical foregrip.

 

*4x 10 round Eagle mags

 

*1x 30 round Eagle mag

 

*3x genuine Ruger rotary mags

TM HK G3 with bipod, green laser, 4x32 scope

M4 with RIS, red dot scope, red laser, adjustable stock, fore grip

MP5-PDW wih folding stock, red scope, red laser & fore grip

.177 caliber Air Rifle with a 4X32 Scope. Includes 50rds. of PBA Platinum Ammunition.

 

The Rocket Air Rifle will ensure you hours of fun. Precision accuracy and a power plant that will push the PBA Platinum pellet 1250 fps!

 

Saab JAS 39 Gripen (Griffin) - Multirole Fighter Aircraft

Zen Magnets - Neodymium Magnetic Balls (@1233)

 

This original design is based off of this brilliant reference aircraft.

www.militaryfactory.com/aircraft/detail.asp?aircraft_id=67

 

This is my entry into the Zen Magnets Contest #79: Unlimited Zen Aircraft (May 2020) ... contest.zenmagnets.com/79-unlimited-aircraft/

 

Build was constructed using @1233 Zen Magnets and consisted of a tapered cylindrical Fuselage, rear Delta Wings, Tail Fin + Engine, front Canard Wings, and pilot Cockpit.

 

The challenge was to achieve the distinctive Canard shape with the limitation of certain magnet angles and tricky mix of duo coupled/parallel magnetic alignments.

 

(@525) - Fuselage - (4x32 core)+(4x(1+29+1) sides)+(4x(7) spacers @2)+(2 nose tip)+(2x(1+23) side intake)+((5x(4+10))+4 rear engine)+(1+(2x30) top trim)+(2x25 wing/fuselage side trim)

 

(@474) - Rear Delta Wings - 2x((1+(2x15) inside) + (1+(2x13)+1) + (2x13) + (1+(2x10)+1) + (2x10) + (1+(2x7)+1) + (2x7) + (1+(2x4)+1 tip) + ((1+(2x9)+1)+(1+(2x4)+1) under wing mounts) + (2+(2x(2x8))+2)+4(riser) missile mount)

 

(@125) - Tail Fin - (1+(2x8)+1 base)+(2x8) + (1+(2x6)+1) + (1+(2x6)) + (1+(2x5)+1) + (1+(2x5)) + (1+(2x4)+1) + (1+(2x4)) + (1+(2x3)+1) + (1+(2x3)) + (1+(2x2)+1)+(1 bottom fuller)

 

(@078) - Front Canard Wings - 2x((1+(2x3)+1 base)+(1+(2x3)+1)+(1+(2x3))+(1+(2x2)+1)+(1+(2x2)+1 tip)+(2x2 riser))

 

(@031) - Cockpit - (1+(2x6) base) + (1+(2x2)+1) + (2x6 strands = side accents)

======

(@1233) Total

 

IMG_20200525_152825

The Rocket .177 cal. Air Rifle is the first in the "Rocket" Series. Equipped with a 4x32 Air Rifle Scope that will ensure you pin-point accuracy and a power plant that will push a PBA Platinum pellet at 1250 fps! The unique OD Green Synthetic Stock is a durable and will last in any weather condition.

Tokyo Marui HK G3 A3 with bi-pod, 4x32 scope and green laser.

CAR-15 M4 with adjustable stock, RIS system, red laser & green/red dor scope

MP5-PDW, with the stock folded, red laser

SIG Sauer pps

L-R:

TM Steyr Aug - 415 fps, TM Steyr Aug w/laser - 285 fps

TM CAR M4A1 ver3 - 360 fps, CA CAR M4 RIS w/ Red Dot Sight and Laser - 275 fps, TM HK G3-SG1 w/ 4x32 sniper scope - 397 fps, bottom:

TM HK MP5-K urz - 230 fps, CA MP5-PDW w/Red & Green dot sight - 345 fps

1 3 4 5 6 7 8