View allAll Photos Tagged 3dPrinter
Sie sehen das 3D-Modell einer 150MN Strangpressmaschine der fa. SMS-Meer.
Ein Modell aus dem 3D-Printer von fabtory.
Anycubic Mono 4K - 1st Print - Cones of Calibration - 1st Fail - 17-07-2022
Printer: Anycubic Mono 4K
1st Print EVER!
File Name: Cones of Calibration
1st Fail
Print Date: 17-07-2022
Resin: Anycubic Water Washable (Stinky! offensive to be in room)
Power: 50%
Slice: 0.08
Setting Default as per Photon Workshop
Normal Exposure: 2.00s
Off Time: 6.50s
Bottom exposure Time: 40.0s
Bottom Layers: 6
Anti-alias: 1
Surface Abrazine: off (frosty effect I think)
The UV Power was turned down as everyone says to do this to prolong screen life. Screens cost more then the printer did no inclined to do this.
Temp: 21°C Humidity 78%
Result: a blasted failure where about 0.5mm printed and the print itself just failed as the raft was well stuck to FEP.
Had to drain the tank and filter the resin which was messy but I had the lab stand and filters which helped. Really need a longer stand pole to clamp a vat holder to.
I managed to get the print fail from the FEP by wiggling with finger underneath and careful lifting with plastic spatula. FEP possible scratched by paper tower used to wipe resin.
It was attached to the Build plate before separation and binding to FEP as can be seen from the lines on the Resin print itself.
Students working on a summer project to take a desktop 3D printer, and move it into a portable briefcase.
Images from the Summit for Transformative Learning conference at Mary Institute and Saint Louis Country Day School (MICDS) in St. Louis, Missouri from June 7-9, 2015. Pictures are of some of the workshops personally attended, and school spaces visited.
Sie sehen das 3D-Modell einer 150MN Strangpressmaschine der fa. SMS-Meer.
Ein Modell aus dem 3D-Printer von fabtory.
HE3D released upgraded their K280-large delta 3D printer kit has massive print size of 280x600 mm with Auto leveling feature and Multi material supported. Prints all types of material such as ABS,PLA,Nylon,HIPS,Wood,Flex etc.
Das Modell im Maßstab 1:50 wurde von 3D-fabtory mit einem Zprinter 650, dem weltschnellsten 3D-Farbdrucker von ZCorporation, erstellt.
Mit freundlcher Genehmigung von SMS-Meer, Möchengladbach
It's working again! This is after a major overhaul on the lower portion involving replacing the frame vertexes (hard to get to) and installing a new MXL belt and manufactured pulley on the Y axis. This makes it actually move properly.
Laptop is running Pronterface + Skeinforge SFACT, printing out a frame vertex, which will hopefully replace the last two non-printed parts on the printer, the upper two frame vertexes (light green)
It printed near perfect until about 90% mark and then came unstuck from the ABP and extruder knocked it loose. Still works fine, just didn't print the lip so I'm using it on top instead of the rear back location but I think this works better anyways for feeding the filament in.
Yes, it kinda looks like a Super Mario pipe...