View allAll Photos Tagged 175cc
SwedeTech Racing Engines pulls off another Pro Tour podium sweep at the SuperKarts! USA SpringNationals in Sonoma, CA. The California based engine builder has swept at least one podium at every Pro Tour round since the 2016 SpringNationals, continuing their streak this weekend. Two pole positions, five prefinal wins, three main event wins, and nine podium appearences were garnered by SwedeTech powered drivers at the second stop on the Pro Tour schedule. The team was once again on-site at the event delivering trackside support to all of their drivers, ensuring they had the support needed to produce strong results.
SwedeTech dominated the S1 Pro class on Saturday, sweeping the top-three spots in qualifying, the pre-final, and main event. Gary Carlton of Leading Edge Motorsports landed his SwedeTech-powered FK chassis in the pole position, followed by Nic LeDuc from Cambrian Karting on his SodiKart in second. Third-place went to Mathias Ramirez of Andersen Karting on his BirelArt, with Jake French from Dallas Karting on his SodiKart following close behind in fifth. The pre-final found Carlton and LeDuc on top once again, followed by French in third, Ramirez in fifth, and Hunter Pickett of Flavor Insights with an Aluminos chassis under him, in sixth. The main event led to a podium sweep for the SwedeTech team, with LeDuc taking the win in round three, followed by Carlton in second and French in third. Ramierez scored a fourth-place finish, and Brian Keck of Keck Racing on his CRG came in sixth with a great drive from his 13th place starting position. This was Nic LeDuc’s first Pro Tour win, and it was a popular achievement amongst his driver peers and the attendees.
Full story can be found on www.swedetechracing.com
item number: HY175ZH-2B
engine type: ZHONGSHEN
engine: single cylinder,4-stroke,air cooled
bore×stroke: 62×58
working volume: 175.1cc
Nominal displace: 175cc
Compression Ratio: 9.0/1
starter system: electric/kick
Ignition Model: C.D.I.
advance angle of ignition: BTDC11(≤1400)35±3≥4000
way valve: underneath type camshaft
lubricating system: pressure splash
engine net weight: 32kg
engine dimension: 354×324×438mm
maximum powerkw/rpm): 9.1/8500
maximum torqueN.m/rpm): 11.5/7000
fuel consumption: ≤354
Low idling speed: 1400
exhaust pollution: CO≤3.8%,HC≤800ppm
starting ability: ≤15s
clutch type: Wet Multi-Plate
derailleur type: Regular meshing gear type
transmission ratio,junior: 4.055
Output sprocket teeth: 15
The capacity of lubricating oil: 1.1L
carburetor: PZ27
spark plug: D8RTC
lubricating oil pump: Internal and external rotor
Magnetor type: Permanent magnet AC
Tricycle Data:
Dimension: 3200×1250×1500mm
Net weight: 400kg
Max.Load capacity: 500kg
Max.Speed: 60km/h
transmission Type: Shaft
Front wheel 4.5-12 Rear wheel 4.5-12
40'HQ Qty.(unit): 45(ckd)
35(skd)
SwedeTech Racing Engines pulls off another Pro Tour podium sweep at the SuperKarts! USA SpringNationals in Sonoma, CA. The California based engine builder has swept at least one podium at every Pro Tour round since the 2016 SpringNationals, continuing their streak this weekend. Two pole positions, five prefinal wins, three main event wins, and nine podium appearences were garnered by SwedeTech powered drivers at the second stop on the Pro Tour schedule. The team was once again on-site at the event delivering trackside support to all of their drivers, ensuring they had the support needed to produce strong results.
SwedeTech dominated the S1 Pro class on Saturday, sweeping the top-three spots in qualifying, the pre-final, and main event. Gary Carlton of Leading Edge Motorsports landed his SwedeTech-powered FK chassis in the pole position, followed by Nic LeDuc from Cambrian Karting on his SodiKart in second. Third-place went to Mathias Ramirez of Andersen Karting on his BirelArt, with Jake French from Dallas Karting on his SodiKart following close behind in fifth. The pre-final found Carlton and LeDuc on top once again, followed by French in third, Ramirez in fifth, and Hunter Pickett of Flavor Insights with an Aluminos chassis under him, in sixth. The main event led to a podium sweep for the SwedeTech team, with LeDuc taking the win in round three, followed by Carlton in second and French in third. Ramierez scored a fourth-place finish, and Brian Keck of Keck Racing on his CRG came in sixth with a great drive from his 13th place starting position. This was Nic LeDuc’s first Pro Tour win, and it was a popular achievement amongst his driver peers and the attendees.
Full story can be found on www.swedetechracing.com
SwedeTech Racing Engines pulls off another Pro Tour podium sweep at the SuperKarts! USA SpringNationals in Sonoma, CA. The California based engine builder has swept at least one podium at every Pro Tour round since the 2016 SpringNationals, continuing their streak this weekend. Two pole positions, five prefinal wins, three main event wins, and nine podium appearences were garnered by SwedeTech powered drivers at the second stop on the Pro Tour schedule. The team was once again on-site at the event delivering trackside support to all of their drivers, ensuring they had the support needed to produce strong results.
SwedeTech dominated the S1 Pro class on Saturday, sweeping the top-three spots in qualifying, the pre-final, and main event. Gary Carlton of Leading Edge Motorsports landed his SwedeTech-powered FK chassis in the pole position, followed by Nic LeDuc from Cambrian Karting on his SodiKart in second. Third-place went to Mathias Ramirez of Andersen Karting on his BirelArt, with Jake French from Dallas Karting on his SodiKart following close behind in fifth. The pre-final found Carlton and LeDuc on top once again, followed by French in third, Ramirez in fifth, and Hunter Pickett of Flavor Insights with an Aluminos chassis under him, in sixth. The main event led to a podium sweep for the SwedeTech team, with LeDuc taking the win in round three, followed by Carlton in second and French in third. Ramierez scored a fourth-place finish, and Brian Keck of Keck Racing on his CRG came in sixth with a great drive from his 13th place starting position. This was Nic LeDuc’s first Pro Tour win, and it was a popular achievement amongst his driver peers and the attendees.
Full story can be found on www.swedetechracing.com
These photos were taken for Motor Revue magazine, if you like to read about these rare bikes visit:
All photos are taken by and property of Nick Kuijpers:
SwedeTech Racing Engines pulls off another Pro Tour podium sweep at the SuperKarts! USA SpringNationals in Sonoma, CA. The California based engine builder has swept at least one podium at every Pro Tour round since the 2016 SpringNationals, continuing their streak this weekend. Two pole positions, five prefinal wins, three main event wins, and nine podium appearences were garnered by SwedeTech powered drivers at the second stop on the Pro Tour schedule. The team was once again on-site at the event delivering trackside support to all of their drivers, ensuring they had the support needed to produce strong results.
SwedeTech dominated the S1 Pro class on Saturday, sweeping the top-three spots in qualifying, the pre-final, and main event. Gary Carlton of Leading Edge Motorsports landed his SwedeTech-powered FK chassis in the pole position, followed by Nic LeDuc from Cambrian Karting on his SodiKart in second. Third-place went to Mathias Ramirez of Andersen Karting on his BirelArt, with Jake French from Dallas Karting on his SodiKart following close behind in fifth. The pre-final found Carlton and LeDuc on top once again, followed by French in third, Ramirez in fifth, and Hunter Pickett of Flavor Insights with an Aluminos chassis under him, in sixth. The main event led to a podium sweep for the SwedeTech team, with LeDuc taking the win in round three, followed by Carlton in second and French in third. Ramierez scored a fourth-place finish, and Brian Keck of Keck Racing on his CRG came in sixth with a great drive from his 13th place starting position. This was Nic LeDuc’s first Pro Tour win, and it was a popular achievement amongst his driver peers and the attendees.
Full story can be found on www.swedetechracing.com
SwedeTech Racing Engines pulls off another Pro Tour podium sweep at the SuperKarts! USA SpringNationals in Sonoma, CA. The California based engine builder has swept at least one podium at every Pro Tour round since the 2016 SpringNationals, continuing their streak this weekend. Two pole positions, five prefinal wins, three main event wins, and nine podium appearences were garnered by SwedeTech powered drivers at the second stop on the Pro Tour schedule. The team was once again on-site at the event delivering trackside support to all of their drivers, ensuring they had the support needed to produce strong results.
SwedeTech dominated the S1 Pro class on Saturday, sweeping the top-three spots in qualifying, the pre-final, and main event. Gary Carlton of Leading Edge Motorsports landed his SwedeTech-powered FK chassis in the pole position, followed by Nic LeDuc from Cambrian Karting on his SodiKart in second. Third-place went to Mathias Ramirez of Andersen Karting on his BirelArt, with Jake French from Dallas Karting on his SodiKart following close behind in fifth. The pre-final found Carlton and LeDuc on top once again, followed by French in third, Ramirez in fifth, and Hunter Pickett of Flavor Insights with an Aluminos chassis under him, in sixth. The main event led to a podium sweep for the SwedeTech team, with LeDuc taking the win in round three, followed by Carlton in second and French in third. Ramierez scored a fourth-place finish, and Brian Keck of Keck Racing on his CRG came in sixth with a great drive from his 13th place starting position. This was Nic LeDuc’s first Pro Tour win, and it was a popular achievement amongst his driver peers and the attendees.
Full story can be found on www.swedetechracing.com
These photos were taken for Motor Revue magazine, if you like to read about these rare bikes visit:
All photos are taken by and property of Nick Kuijpers:
SwedeTech Racing Engines pulls off another Pro Tour podium sweep at the SuperKarts! USA SpringNationals in Sonoma, CA. The California based engine builder has swept at least one podium at every Pro Tour round since the 2016 SpringNationals, continuing their streak this weekend. Two pole positions, five prefinal wins, three main event wins, and nine podium appearences were garnered by SwedeTech powered drivers at the second stop on the Pro Tour schedule. The team was once again on-site at the event delivering trackside support to all of their drivers, ensuring they had the support needed to produce strong results.
SwedeTech dominated the S1 Pro class on Saturday, sweeping the top-three spots in qualifying, the pre-final, and main event. Gary Carlton of Leading Edge Motorsports landed his SwedeTech-powered FK chassis in the pole position, followed by Nic LeDuc from Cambrian Karting on his SodiKart in second. Third-place went to Mathias Ramirez of Andersen Karting on his BirelArt, with Jake French from Dallas Karting on his SodiKart following close behind in fifth. The pre-final found Carlton and LeDuc on top once again, followed by French in third, Ramirez in fifth, and Hunter Pickett of Flavor Insights with an Aluminos chassis under him, in sixth. The main event led to a podium sweep for the SwedeTech team, with LeDuc taking the win in round three, followed by Carlton in second and French in third. Ramierez scored a fourth-place finish, and Brian Keck of Keck Racing on his CRG came in sixth with a great drive from his 13th place starting position. This was Nic LeDuc’s first Pro Tour win, and it was a popular achievement amongst his driver peers and the attendees.
Full story can be found on www.swedetechracing.com
SwedeTech Racing Engines pulls off another Pro Tour podium sweep at the SuperKarts! USA SpringNationals in Sonoma, CA. The California based engine builder has swept at least one podium at every Pro Tour round since the 2016 SpringNationals, continuing their streak this weekend. Two pole positions, five prefinal wins, three main event wins, and nine podium appearences were garnered by SwedeTech powered drivers at the second stop on the Pro Tour schedule. The team was once again on-site at the event delivering trackside support to all of their drivers, ensuring they had the support needed to produce strong results.
SwedeTech dominated the S1 Pro class on Saturday, sweeping the top-three spots in qualifying, the pre-final, and main event. Gary Carlton of Leading Edge Motorsports landed his SwedeTech-powered FK chassis in the pole position, followed by Nic LeDuc from Cambrian Karting on his SodiKart in second. Third-place went to Mathias Ramirez of Andersen Karting on his BirelArt, with Jake French from Dallas Karting on his SodiKart following close behind in fifth. The pre-final found Carlton and LeDuc on top once again, followed by French in third, Ramirez in fifth, and Hunter Pickett of Flavor Insights with an Aluminos chassis under him, in sixth. The main event led to a podium sweep for the SwedeTech team, with LeDuc taking the win in round three, followed by Carlton in second and French in third. Ramierez scored a fourth-place finish, and Brian Keck of Keck Racing on his CRG came in sixth with a great drive from his 13th place starting position. This was Nic LeDuc’s first Pro Tour win, and it was a popular achievement amongst his driver peers and the attendees.
Full story can be found on www.swedetechracing.com
SwedeTech Racing Engines pulls off another Pro Tour podium sweep at the SuperKarts! USA SpringNationals in Sonoma, CA. The California based engine builder has swept at least one podium at every Pro Tour round since the 2016 SpringNationals, continuing their streak this weekend. Two pole positions, five prefinal wins, three main event wins, and nine podium appearences were garnered by SwedeTech powered drivers at the second stop on the Pro Tour schedule. The team was once again on-site at the event delivering trackside support to all of their drivers, ensuring they had the support needed to produce strong results.
SwedeTech dominated the S1 Pro class on Saturday, sweeping the top-three spots in qualifying, the pre-final, and main event. Gary Carlton of Leading Edge Motorsports landed his SwedeTech-powered FK chassis in the pole position, followed by Nic LeDuc from Cambrian Karting on his SodiKart in second. Third-place went to Mathias Ramirez of Andersen Karting on his BirelArt, with Jake French from Dallas Karting on his SodiKart following close behind in fifth. The pre-final found Carlton and LeDuc on top once again, followed by French in third, Ramirez in fifth, and Hunter Pickett of Flavor Insights with an Aluminos chassis under him, in sixth. The main event led to a podium sweep for the SwedeTech team, with LeDuc taking the win in round three, followed by Carlton in second and French in third. Ramierez scored a fourth-place finish, and Brian Keck of Keck Racing on his CRG came in sixth with a great drive from his 13th place starting position. This was Nic LeDuc’s first Pro Tour win, and it was a popular achievement amongst his driver peers and the attendees.
Full story can be found on www.swedetechracing.com
c1956 Engine No 44
Bikes of the Italian firm of Mondial were manufactured under license in Spain by Construcciones Mecánicas Españolas, SA (COMESA) from 1956 to 1962.
SwedeTech Racing Engines pulls off another Pro Tour podium sweep at the SuperKarts! USA SpringNationals in Sonoma, CA. The California based engine builder has swept at least one podium at every Pro Tour round since the 2016 SpringNationals, continuing their streak this weekend. Two pole positions, five prefinal wins, three main event wins, and nine podium appearences were garnered by SwedeTech powered drivers at the second stop on the Pro Tour schedule. The team was once again on-site at the event delivering trackside support to all of their drivers, ensuring they had the support needed to produce strong results.
SwedeTech dominated the S1 Pro class on Saturday, sweeping the top-three spots in qualifying, the pre-final, and main event. Gary Carlton of Leading Edge Motorsports landed his SwedeTech-powered FK chassis in the pole position, followed by Nic LeDuc from Cambrian Karting on his SodiKart in second. Third-place went to Mathias Ramirez of Andersen Karting on his BirelArt, with Jake French from Dallas Karting on his SodiKart following close behind in fifth. The pre-final found Carlton and LeDuc on top once again, followed by French in third, Ramirez in fifth, and Hunter Pickett of Flavor Insights with an Aluminos chassis under him, in sixth. The main event led to a podium sweep for the SwedeTech team, with LeDuc taking the win in round three, followed by Carlton in second and French in third. Ramierez scored a fourth-place finish, and Brian Keck of Keck Racing on his CRG came in sixth with a great drive from his 13th place starting position. This was Nic LeDuc’s first Pro Tour win, and it was a popular achievement amongst his driver peers and the attendees.
Full story can be found on www.swedetechracing.com
SwedeTech Racing Engines pulls off another Pro Tour podium sweep at the SuperKarts! USA SpringNationals in Sonoma, CA. The California based engine builder has swept at least one podium at every Pro Tour round since the 2016 SpringNationals, continuing their streak this weekend. Two pole positions, five prefinal wins, three main event wins, and nine podium appearences were garnered by SwedeTech powered drivers at the second stop on the Pro Tour schedule. The team was once again on-site at the event delivering trackside support to all of their drivers, ensuring they had the support needed to produce strong results.
SwedeTech dominated the S1 Pro class on Saturday, sweeping the top-three spots in qualifying, the pre-final, and main event. Gary Carlton of Leading Edge Motorsports landed his SwedeTech-powered FK chassis in the pole position, followed by Nic LeDuc from Cambrian Karting on his SodiKart in second. Third-place went to Mathias Ramirez of Andersen Karting on his BirelArt, with Jake French from Dallas Karting on his SodiKart following close behind in fifth. The pre-final found Carlton and LeDuc on top once again, followed by French in third, Ramirez in fifth, and Hunter Pickett of Flavor Insights with an Aluminos chassis under him, in sixth. The main event led to a podium sweep for the SwedeTech team, with LeDuc taking the win in round three, followed by Carlton in second and French in third. Ramierez scored a fourth-place finish, and Brian Keck of Keck Racing on his CRG came in sixth with a great drive from his 13th place starting position. This was Nic LeDuc’s first Pro Tour win, and it was a popular achievement amongst his driver peers and the attendees.
Full story can be found on www.swedetechracing.com
SwedeTech Racing Engines pulls off another Pro Tour podium sweep at the SuperKarts! USA SpringNationals in Sonoma, CA. The California based engine builder has swept at least one podium at every Pro Tour round since the 2016 SpringNationals, continuing their streak this weekend. Two pole positions, five prefinal wins, three main event wins, and nine podium appearences were garnered by SwedeTech powered drivers at the second stop on the Pro Tour schedule. The team was once again on-site at the event delivering trackside support to all of their drivers, ensuring they had the support needed to produce strong results.
SwedeTech dominated the S1 Pro class on Saturday, sweeping the top-three spots in qualifying, the pre-final, and main event. Gary Carlton of Leading Edge Motorsports landed his SwedeTech-powered FK chassis in the pole position, followed by Nic LeDuc from Cambrian Karting on his SodiKart in second. Third-place went to Mathias Ramirez of Andersen Karting on his BirelArt, with Jake French from Dallas Karting on his SodiKart following close behind in fifth. The pre-final found Carlton and LeDuc on top once again, followed by French in third, Ramirez in fifth, and Hunter Pickett of Flavor Insights with an Aluminos chassis under him, in sixth. The main event led to a podium sweep for the SwedeTech team, with LeDuc taking the win in round three, followed by Carlton in second and French in third. Ramierez scored a fourth-place finish, and Brian Keck of Keck Racing on his CRG came in sixth with a great drive from his 13th place starting position. This was Nic LeDuc’s first Pro Tour win, and it was a popular achievement amongst his driver peers and the attendees.
Full story can be found on www.swedetechracing.com
SwedeTech Racing Engines pulls off another Pro Tour podium sweep at the SuperKarts! USA SpringNationals in Sonoma, CA. The California based engine builder has swept at least one podium at every Pro Tour round since the 2016 SpringNationals, continuing their streak this weekend. Two pole positions, five prefinal wins, three main event wins, and nine podium appearences were garnered by SwedeTech powered drivers at the second stop on the Pro Tour schedule. The team was once again on-site at the event delivering trackside support to all of their drivers, ensuring they had the support needed to produce strong results.
SwedeTech dominated the S1 Pro class on Saturday, sweeping the top-three spots in qualifying, the pre-final, and main event. Gary Carlton of Leading Edge Motorsports landed his SwedeTech-powered FK chassis in the pole position, followed by Nic LeDuc from Cambrian Karting on his SodiKart in second. Third-place went to Mathias Ramirez of Andersen Karting on his BirelArt, with Jake French from Dallas Karting on his SodiKart following close behind in fifth. The pre-final found Carlton and LeDuc on top once again, followed by French in third, Ramirez in fifth, and Hunter Pickett of Flavor Insights with an Aluminos chassis under him, in sixth. The main event led to a podium sweep for the SwedeTech team, with LeDuc taking the win in round three, followed by Carlton in second and French in third. Ramierez scored a fourth-place finish, and Brian Keck of Keck Racing on his CRG came in sixth with a great drive from his 13th place starting position. This was Nic LeDuc’s first Pro Tour win, and it was a popular achievement amongst his driver peers and the attendees.
Full story can be found on www.swedetechracing.com
SwedeTech Racing Engines pulls off another Pro Tour podium sweep at the SuperKarts! USA SpringNationals in Sonoma, CA. The California based engine builder has swept at least one podium at every Pro Tour round since the 2016 SpringNationals, continuing their streak this weekend. Two pole positions, five prefinal wins, three main event wins, and nine podium appearences were garnered by SwedeTech powered drivers at the second stop on the Pro Tour schedule. The team was once again on-site at the event delivering trackside support to all of their drivers, ensuring they had the support needed to produce strong results.
SwedeTech dominated the S1 Pro class on Saturday, sweeping the top-three spots in qualifying, the pre-final, and main event. Gary Carlton of Leading Edge Motorsports landed his SwedeTech-powered FK chassis in the pole position, followed by Nic LeDuc from Cambrian Karting on his SodiKart in second. Third-place went to Mathias Ramirez of Andersen Karting on his BirelArt, with Jake French from Dallas Karting on his SodiKart following close behind in fifth. The pre-final found Carlton and LeDuc on top once again, followed by French in third, Ramirez in fifth, and Hunter Pickett of Flavor Insights with an Aluminos chassis under him, in sixth. The main event led to a podium sweep for the SwedeTech team, with LeDuc taking the win in round three, followed by Carlton in second and French in third. Ramierez scored a fourth-place finish, and Brian Keck of Keck Racing on his CRG came in sixth with a great drive from his 13th place starting position. This was Nic LeDuc’s first Pro Tour win, and it was a popular achievement amongst his driver peers and the attendees.
Full story can be found on www.swedetechracing.com