View allAll Photos Tagged 175cc
SwedeTech Racing Engines pulls off another Pro Tour podium sweep at the SuperKarts! USA SpringNationals in Sonoma, CA. The California based engine builder has swept at least one podium at every Pro Tour round since the 2016 SpringNationals, continuing their streak this weekend. Two pole positions, five prefinal wins, three main event wins, and nine podium appearences were garnered by SwedeTech powered drivers at the second stop on the Pro Tour schedule. The team was once again on-site at the event delivering trackside support to all of their drivers, ensuring they had the support needed to produce strong results.
SwedeTech dominated the S1 Pro class on Saturday, sweeping the top-three spots in qualifying, the pre-final, and main event. Gary Carlton of Leading Edge Motorsports landed his SwedeTech-powered FK chassis in the pole position, followed by Nic LeDuc from Cambrian Karting on his SodiKart in second. Third-place went to Mathias Ramirez of Andersen Karting on his BirelArt, with Jake French from Dallas Karting on his SodiKart following close behind in fifth. The pre-final found Carlton and LeDuc on top once again, followed by French in third, Ramirez in fifth, and Hunter Pickett of Flavor Insights with an Aluminos chassis under him, in sixth. The main event led to a podium sweep for the SwedeTech team, with LeDuc taking the win in round three, followed by Carlton in second and French in third. Ramierez scored a fourth-place finish, and Brian Keck of Keck Racing on his CRG came in sixth with a great drive from his 13th place starting position. This was Nic LeDuc’s first Pro Tour win, and it was a popular achievement amongst his driver peers and the attendees.
Full story can be found on www.swedetechracing.com
SwedeTech Racing Engines pulls off another Pro Tour podium sweep at the SuperKarts! USA SpringNationals in Sonoma, CA. The California based engine builder has swept at least one podium at every Pro Tour round since the 2016 SpringNationals, continuing their streak this weekend. Two pole positions, five prefinal wins, three main event wins, and nine podium appearences were garnered by SwedeTech powered drivers at the second stop on the Pro Tour schedule. The team was once again on-site at the event delivering trackside support to all of their drivers, ensuring they had the support needed to produce strong results.
SwedeTech dominated the S1 Pro class on Saturday, sweeping the top-three spots in qualifying, the pre-final, and main event. Gary Carlton of Leading Edge Motorsports landed his SwedeTech-powered FK chassis in the pole position, followed by Nic LeDuc from Cambrian Karting on his SodiKart in second. Third-place went to Mathias Ramirez of Andersen Karting on his BirelArt, with Jake French from Dallas Karting on his SodiKart following close behind in fifth. The pre-final found Carlton and LeDuc on top once again, followed by French in third, Ramirez in fifth, and Hunter Pickett of Flavor Insights with an Aluminos chassis under him, in sixth. The main event led to a podium sweep for the SwedeTech team, with LeDuc taking the win in round three, followed by Carlton in second and French in third. Ramierez scored a fourth-place finish, and Brian Keck of Keck Racing on his CRG came in sixth with a great drive from his 13th place starting position. This was Nic LeDuc’s first Pro Tour win, and it was a popular achievement amongst his driver peers and the attendees.
Full story can be found on www.swedetechracing.com
1927. 175cc Zurcher engine and Staub gearbox.
Geco Herstal started life as a French manufacturer - J et H Gerkinet in the Seine Dept. The Belgium Company Gillet took them over and produced bikes under the Geco-Herstal brand.
SwedeTech Racing Engines pulls off another Pro Tour podium sweep at the SuperKarts! USA SpringNationals in Sonoma, CA. The California based engine builder has swept at least one podium at every Pro Tour round since the 2016 SpringNationals, continuing their streak this weekend. Two pole positions, five prefinal wins, three main event wins, and nine podium appearences were garnered by SwedeTech powered drivers at the second stop on the Pro Tour schedule. The team was once again on-site at the event delivering trackside support to all of their drivers, ensuring they had the support needed to produce strong results.
SwedeTech dominated the S1 Pro class on Saturday, sweeping the top-three spots in qualifying, the pre-final, and main event. Gary Carlton of Leading Edge Motorsports landed his SwedeTech-powered FK chassis in the pole position, followed by Nic LeDuc from Cambrian Karting on his SodiKart in second. Third-place went to Mathias Ramirez of Andersen Karting on his BirelArt, with Jake French from Dallas Karting on his SodiKart following close behind in fifth. The pre-final found Carlton and LeDuc on top once again, followed by French in third, Ramirez in fifth, and Hunter Pickett of Flavor Insights with an Aluminos chassis under him, in sixth. The main event led to a podium sweep for the SwedeTech team, with LeDuc taking the win in round three, followed by Carlton in second and French in third. Ramierez scored a fourth-place finish, and Brian Keck of Keck Racing on his CRG came in sixth with a great drive from his 13th place starting position. This was Nic LeDuc’s first Pro Tour win, and it was a popular achievement amongst his driver peers and the attendees.
Full story can be found on www.swedetechracing.com
Salt Shaker III, a 1972 Honda with twin 175cc motors owned by Bob Guynes of San Mateo, CA. It runs in 8 different classes depending on how the motor(s) are set up. Front motor detail.
SwedeTech Racing Engines pulls off another Pro Tour podium sweep at the SuperKarts! USA SpringNationals in Sonoma, CA. The California based engine builder has swept at least one podium at every Pro Tour round since the 2016 SpringNationals, continuing their streak this weekend. Two pole positions, five prefinal wins, three main event wins, and nine podium appearences were garnered by SwedeTech powered drivers at the second stop on the Pro Tour schedule. The team was once again on-site at the event delivering trackside support to all of their drivers, ensuring they had the support needed to produce strong results.
SwedeTech dominated the S1 Pro class on Saturday, sweeping the top-three spots in qualifying, the pre-final, and main event. Gary Carlton of Leading Edge Motorsports landed his SwedeTech-powered FK chassis in the pole position, followed by Nic LeDuc from Cambrian Karting on his SodiKart in second. Third-place went to Mathias Ramirez of Andersen Karting on his BirelArt, with Jake French from Dallas Karting on his SodiKart following close behind in fifth. The pre-final found Carlton and LeDuc on top once again, followed by French in third, Ramirez in fifth, and Hunter Pickett of Flavor Insights with an Aluminos chassis under him, in sixth. The main event led to a podium sweep for the SwedeTech team, with LeDuc taking the win in round three, followed by Carlton in second and French in third. Ramierez scored a fourth-place finish, and Brian Keck of Keck Racing on his CRG came in sixth with a great drive from his 13th place starting position. This was Nic LeDuc’s first Pro Tour win, and it was a popular achievement amongst his driver peers and the attendees.
Full story can be found on www.swedetechracing.com
SwedeTech Racing Engines pulls off another Pro Tour podium sweep at the SuperKarts! USA SpringNationals in Sonoma, CA. The California based engine builder has swept at least one podium at every Pro Tour round since the 2016 SpringNationals, continuing their streak this weekend. Two pole positions, five prefinal wins, three main event wins, and nine podium appearences were garnered by SwedeTech powered drivers at the second stop on the Pro Tour schedule. The team was once again on-site at the event delivering trackside support to all of their drivers, ensuring they had the support needed to produce strong results.
SwedeTech dominated the S1 Pro class on Saturday, sweeping the top-three spots in qualifying, the pre-final, and main event. Gary Carlton of Leading Edge Motorsports landed his SwedeTech-powered FK chassis in the pole position, followed by Nic LeDuc from Cambrian Karting on his SodiKart in second. Third-place went to Mathias Ramirez of Andersen Karting on his BirelArt, with Jake French from Dallas Karting on his SodiKart following close behind in fifth. The pre-final found Carlton and LeDuc on top once again, followed by French in third, Ramirez in fifth, and Hunter Pickett of Flavor Insights with an Aluminos chassis under him, in sixth. The main event led to a podium sweep for the SwedeTech team, with LeDuc taking the win in round three, followed by Carlton in second and French in third. Ramierez scored a fourth-place finish, and Brian Keck of Keck Racing on his CRG came in sixth with a great drive from his 13th place starting position. This was Nic LeDuc’s first Pro Tour win, and it was a popular achievement amongst his driver peers and the attendees.
Full story can be found on www.swedetechracing.com
1968 Bridgestone 175cc. Well done restoration. A fine piece of machine that has been a very popular display bike in the museum. Yes comes with a clear title, as do nearly every motorcycle in this collection. For those few motorcycles we do not have a title for, we will secure titles upon your purchase of this collection.
Registered new in Barrow-in-Furness in 05/1968. Seen looking smart on display at the Scorton Steam Show on 19/06/2016. © Peter Steel 2016.
BANDUNG - Sejumlah pebalap tergelincir saat putaran kedua Master Of Matic Race Champs 2012, di Jalan Diponegoro, Kota Bandung, Minggu (20/5/2012). Kompetisi yang diikuti sekitar 250 pebalap itu mempertandingkan 10 kelas, yakni Matic 115cc Standard Pemula, Matic 115cc Standard Open, Matic 130cc Standard Pemula, Matic 130cc Tune Up Open, Matic 150cc Bore Up Pemula, Matic 150cc Bore Up Open, Matic 175cc Tune Up Open, Matic FFA sampai dengan 350cc, Bebek 125cc Tune Up Pemula (MP3), dan Bebek 110cc Tune Up (MP4). [Aries Rachmandy]
SwedeTech Racing Engines pulls off another Pro Tour podium sweep at the SuperKarts! USA SpringNationals in Sonoma, CA. The California based engine builder has swept at least one podium at every Pro Tour round since the 2016 SpringNationals, continuing their streak this weekend. Two pole positions, five prefinal wins, three main event wins, and nine podium appearences were garnered by SwedeTech powered drivers at the second stop on the Pro Tour schedule. The team was once again on-site at the event delivering trackside support to all of their drivers, ensuring they had the support needed to produce strong results.
SwedeTech dominated the S1 Pro class on Saturday, sweeping the top-three spots in qualifying, the pre-final, and main event. Gary Carlton of Leading Edge Motorsports landed his SwedeTech-powered FK chassis in the pole position, followed by Nic LeDuc from Cambrian Karting on his SodiKart in second. Third-place went to Mathias Ramirez of Andersen Karting on his BirelArt, with Jake French from Dallas Karting on his SodiKart following close behind in fifth. The pre-final found Carlton and LeDuc on top once again, followed by French in third, Ramirez in fifth, and Hunter Pickett of Flavor Insights with an Aluminos chassis under him, in sixth. The main event led to a podium sweep for the SwedeTech team, with LeDuc taking the win in round three, followed by Carlton in second and French in third. Ramierez scored a fourth-place finish, and Brian Keck of Keck Racing on his CRG came in sixth with a great drive from his 13th place starting position. This was Nic LeDuc’s first Pro Tour win, and it was a popular achievement amongst his driver peers and the attendees.
Full story can be found on www.swedetechracing.com
Front of my almost completed 1963 Cezeta scooter from Czechoslovakia. 175cc, air cooled two-stroke motor with electric start.
SwedeTech Racing Engines pulls off another Pro Tour podium sweep at the SuperKarts! USA SpringNationals in Sonoma, CA. The California based engine builder has swept at least one podium at every Pro Tour round since the 2016 SpringNationals, continuing their streak this weekend. Two pole positions, five prefinal wins, three main event wins, and nine podium appearences were garnered by SwedeTech powered drivers at the second stop on the Pro Tour schedule. The team was once again on-site at the event delivering trackside support to all of their drivers, ensuring they had the support needed to produce strong results.
SwedeTech dominated the S1 Pro class on Saturday, sweeping the top-three spots in qualifying, the pre-final, and main event. Gary Carlton of Leading Edge Motorsports landed his SwedeTech-powered FK chassis in the pole position, followed by Nic LeDuc from Cambrian Karting on his SodiKart in second. Third-place went to Mathias Ramirez of Andersen Karting on his BirelArt, with Jake French from Dallas Karting on his SodiKart following close behind in fifth. The pre-final found Carlton and LeDuc on top once again, followed by French in third, Ramirez in fifth, and Hunter Pickett of Flavor Insights with an Aluminos chassis under him, in sixth. The main event led to a podium sweep for the SwedeTech team, with LeDuc taking the win in round three, followed by Carlton in second and French in third. Ramierez scored a fourth-place finish, and Brian Keck of Keck Racing on his CRG came in sixth with a great drive from his 13th place starting position. This was Nic LeDuc’s first Pro Tour win, and it was a popular achievement amongst his driver peers and the attendees.
Full story can be found on www.swedetechracing.com
Registered new in Barrow-in-Furness in 05/1968. Seen looking smart on display at the Scorton Steam Show on 19/06/2016. © Peter Steel 2016.
Rear of my almost completed 1963 Cezeta scooter from Czechoslovakia. 175cc, air cooled two-stroke motor with electric start.
Me posing Age 14 and my 175cc Francis Barnett with BSA front forks (Note trophy on bike,I Influenced the Wild Ones)
This British built Scooter was first registered in 04/1960 and sold by renowned Barrow-in-Furness based Eddie Crooks Motorcycles to a local customer. This 175cc powered scooter has been laid-up for over fifty years and is seen here on Cavendish Street, Barrow-in-Furness, on 17/07/2021, on display at the Barrow Festival of Transport, on behalf of the Ready Steady Go Scooter Club, Barrow-in-Furness. © Peter Steel 2021.
The bike: 1970 Yamaha CT1B Enduro. 175CC. Riding in the snow at the 39 mile campground near Lake Tahoe.
I guess my dad wanted to have a turn.
A rainy day visit to Tacla Taid Anglesey's Transport Museum. Nice and dry on the inside, wet when you had to go outside (although the rain wasn't too bad at this point).
Walk back in time and see over 100 classic vehicles dating from the 1920s onward. Set in a replica of a 1940s cobbled street, you can view an assortment of agricultural, military and civilian vehicles including cars, motorbikes, tractors, army trucks, armoured personnel carriers and more. Many of their vehicles have been seen on TV and in movies!
Motorcycles room - up the stairs from the big room with old classic cars. (above the main entrance and shop / ticket office).
BSA Bantam
175cc
1968
Born from Czechoslovakia, good Soviet Eastern block sheet metal. Has a power 175cc powerhouse, maybe 12bhp on a good day, semi automatic that semi works. The gas tank is that big thing in front
Courtesy of my cousin Andy who said "MBH 79L was a Honda CB175 which I had new in 1973. A twin 4-stroke 175cc. Taken in 1973."
SwedeTech Racing Engines pulls off another Pro Tour podium sweep at the SuperKarts! USA SpringNationals in Sonoma, CA. The California based engine builder has swept at least one podium at every Pro Tour round since the 2016 SpringNationals, continuing their streak this weekend. Two pole positions, five prefinal wins, three main event wins, and nine podium appearences were garnered by SwedeTech powered drivers at the second stop on the Pro Tour schedule. The team was once again on-site at the event delivering trackside support to all of their drivers, ensuring they had the support needed to produce strong results.
SwedeTech dominated the S1 Pro class on Saturday, sweeping the top-three spots in qualifying, the pre-final, and main event. Gary Carlton of Leading Edge Motorsports landed his SwedeTech-powered FK chassis in the pole position, followed by Nic LeDuc from Cambrian Karting on his SodiKart in second. Third-place went to Mathias Ramirez of Andersen Karting on his BirelArt, with Jake French from Dallas Karting on his SodiKart following close behind in fifth. The pre-final found Carlton and LeDuc on top once again, followed by French in third, Ramirez in fifth, and Hunter Pickett of Flavor Insights with an Aluminos chassis under him, in sixth. The main event led to a podium sweep for the SwedeTech team, with LeDuc taking the win in round three, followed by Carlton in second and French in third. Ramierez scored a fourth-place finish, and Brian Keck of Keck Racing on his CRG came in sixth with a great drive from his 13th place starting position. This was Nic LeDuc’s first Pro Tour win, and it was a popular achievement amongst his driver peers and the attendees.
Full story can be found on www.swedetechracing.com