The Northern mockingbird frequently gives a "wing flash" display, where it half or fully opens its wings in jerky intermediate steps, showing off the big white patches. No one knows why it does this behavior, but some have suggested that it startles insects into revealing themselves. However, it does not appear to flush insects, and other mockingbird species that do not have white wing patches use the display, casting doubt on this idea. It is also seen in young birds when they are exposed to a situation new to them. Sources: www.birds.cornell.edu/AllAboutBirds/BirdGuide/Northern_Mo...

and

www.tsha.utexas.edu/handbook/online/articles/NN/tbn1.html

 

Wading birds often hold their wings outstretched, as if they were drying them, which is called canopy feeding, and draws in fish seeking shade for cover, and sometimes wading birds spread their wings as they herd fish into shallow water.

 

This mockingbird is at the new platform feeder in front of my office window, from which I have removed the screen. Sometimes I shoot through a bent rung of my horizontal shades (which I call my blind blind). In this case, the blinds were up and the bird, back towards me, didn't see me right away, and I was able to take this single shot before it flew off.

 

----------------------------------

 

I still must apologize for not being able to visit much because of my workload. On the one hand, it's good for the bank account, but I sure miss seeing your shots every day. I'll try to reciprocate as often as I can. Thanks for understanding.

 

© All rights reserved. No usage allowed in any form without the written consent of Mim Eisenberg.

+++ DISCLAIMER +++

Nothing you see here is real, even though the model, the conversion or the presented background story might be based on historical facts. BEWARE!

  

Some background:

The AH-1 Cobra was developed in the mid-1960s as an interim gunship for the U.S. Army for use during the Vietnam War. The Cobra shared the proven transmission, rotor system, and the T53 turboshaft engine of the UH-1 "Huey". By June 1967, the first AH-1G HueyCobras had been delivered. Bell built 1,116 AH-1Gs for the U.S. Army between 1967 and 1973, and the Cobras chalked up over a million operational hours in Vietnam.

The U.S. Marine Corps was very interested in the AH-1G Cobra, too, but it preferred a twin-engine version for improved safety in over-water operations, and also wanted a more potent turret-mounted weapon. At first, the Department of Defense had balked at providing the Marines with a twin-engine version of the Cobra, in the belief that commonality with Army AH-1Gs outweighed the advantages of a different engine fit. However, the Marines won out and awarded Bell a contract for 49 twin-engine AH-1J SeaCobras in May 1968. As an interim measure the U.S. Army passed on thirty-eight AH-1Gs to the Marines in 1969. The AH-1J also received a more powerful gun turret with a three-barrel 20 mm XM197 cannon based on the six-barrel M61 Vulcan cannon.

 

During the 1990s, the US forces gradually phased out its Cobra fleet. The withdrawn AH-1s were typically offered to other potential operators, usually NATO allies. Some were also given to the USDA's Forest Service for fire surveillance, and a handful AH-1s went into private hands, including the NASA. Among these airframes were some USMC AH-1Js, which had in part been mothballed in the Mojave Desert since their replacement through more powerful and modern AH-1 variants and the AH-64.

About twenty airframes were, after having been de-militarized, bought by the Kaman Corporation in 2003, in a bold move to quickly respond to more than 20 inquiries for the company’s K-1200 ‘K-Max’ crane synchropter since the type’s end of production in 2001 from firefighting, logging and industry transport requirements. While not such a dedicated medium lift helicopter as the K-1200, which had from the outset been optimized for external cargo load operations, the twin-engine AH-1J promised to be a very effective alternative and a powerful basis for a conversion into a crane helicopter.

 

The result of this conversion program was the Kaman K-1300, also known as the “K-Cobra” or “Crane Cobra”. While the basic airframe of the AH-1J was retained, extensive detail modifications were made. To reduce weight and compensate for the extensive hardware changes, the SeaCobra lost its armor, the chin turret, and the stub wings. Beyond that, many invisible changes were made; the internal structure between the engine mounts was beefed up with an additional cage structure and a cargo hook was installed under the fuselage in the helicopter’s center of lift.

 

To further optimize the K-Cobra’s performance, the dynamic components were modified and improved, too. While the engine remained the same, its oil cooler was enlarged and the original output limit to 1.500 shp was removed and the gearbox was strengthened to fully exploit the twin-engine’s available power of 1,800 shp (1,342 kW). The rotor system was also modified and optimized for the transport of underslung loads: the original UH-1 dual-blade rotors were replaced with new four-blade rotors. The new main rotor with rugged heavy-duty blades offered more lift at less rotor speed, and the blades’ lift sections were moved away from the hub so that downwash and turbulences directly under the helicopter’s CoG and man hook were reduced to keep the cargo load more stable. Due to the main rotor’s slightly bigger diameter the tail rotor was changed into a slightly smaller four-blade rotor, too. This new arrangement made the K-1300 more stable while hovering or during slow speed maneuvers and more responsive to steering input.

 

The Cobra’s crew of two was retained, but the cockpit was re-arranged and split into two compartments: the pilot retained the original rear position in the tandem cockpit under the original glazing, but the gunner’s station in front of him, together with the secondary dashboard, was omitted and replaced by a new, fully glazed cabin under the former gunner position. This cabin occupied the former gun station and its ammunition supply and contained a rearward-facing workstation for a second pilot with full controls. It was accessible via a separate door or a ladder from above, through a trap door in the former gunner’s station floor, where a simple foldable bench was available for a third person. This arrangement was chosen due to almost complete lack of oversight of the slung load from the normal cockpit position, despite a CCTV (closed circuit television) system with two cameras intended for observation of slung loads. The second pilot would control the helicopter during delicate load-handling maneuvers, while the primary pilot “above” would fly the helicopter during transfer flights, both sharing the workload.

 

To accommodate the cabin under the fuselage and improve ground handling, the AH-1J’s skids were replaced by a stalky, fixed four-wheel landing gear that considerably increased ground clearance (almost 7 feet), making the attachment of loads on the ground to the main ventral hook easier, as the K-1300 could be “rolled over” the cargo on the ground and did not have to hover above it to connect. However, an external ladder had to be added so that the pilot could reach his/her workstation almost 10 feet above the ground.

 

The bulky ventral cabin, the draggy landing gear and the new lift-optimized rotor system reduced the CraneCobra’s top speed by a third to just 124 mph (200 km/h), but the helicopter’s load-carrying capacity became 35% higher and the Cobra’s performance under “hot & high” conditions was markedly improved, too.

For transfer flights, a pair of external auxiliary tanks could be mounted to the lower fuselage flanks, which could also be replaced with cargo boxes of similar size and shape.

 

K-1300 buyers primarily came from the United States and Canada, but there were foreign operators, too. A major operator in Europe became Heliswiss, the oldest helicopter company in Switzerland. The company was founded as „Heliswiss Schweizerische Helikopter AG“, with headquarters in Berne-Belp on April 17, 1953, what also marked the beginning of commercial helicopter flying in Switzerland. During the following years Heliswiss expanded in Switzerland and formed a network with bases in Belp BE, Samedan GR, Domat Ems GR, Locarno TI, Erstfeld UR, Gampel VS, Gstaad BE and Gruyères FR. During the build-up of the rescue-company Schweizerische Rettungsflugwacht (REGA) as an independent network, Heliswiss carried out rescue missions on their behalf.

 

Heliswiss carried out operations all over the world, e. g. in Greenland, Suriname, North Africa and South America. The first helicopter was a Bell 47 G-1, registered as HB-XAG on September 23, 1953. From 1963 Heliswiss started to expand and began to operate with medium helicopters like the Agusta Bell 204B with a turbine power of 1050 HP and an external load of up to 1500 kg. From 1979 Heliswiss operated a Bell 214 (external load up to 2.8 t).

Since 1991 Heliswiss operated a Russian Kamov 32A12 (a civil crane version of the Ka-27 “Helix”), which was joined by two K-1300s in 2004. They were frequently used for construction of transmission towers for overhead power lines and pylons for railway catenary lines, for selective logging and also as fire bombers with underslung water bags, the latter managed by the German Helog company, operating out of Ainring and Küssnacht in Germany and Switzerland until 2008, when Helog changed its business focus into a helicopter flight training academy in Liberia with the support of Germany's Federal Ministry of Education and Research.

A second Kamov 32A12 joined the fleet in 2015, which replaced one of the K-1300s, and Heliswiss’ last K-1300 was retired in early 2022.

  

General characteristics:

Crew: 2, plus space for a passenger

Length: 54 ft 3 in (16,56 m) including rotors

44 ft 5 in (13.5 m) fuselage only

Main rotor diameter: 46 ft 2¾ in (14,11 m)

Main rotor area: 1,677.64 sq ft (156,37 m2)

Width (over landing gear): 12 ft 6 in (3.85 m)

Height: 17 ft 8¼ in (5,40 m)

Empty weight: 5,810 lb (2,635 kg)

Max. takeoff weight: 9,500 lb (4,309 kg) without slung load

13,515 lb (6,145 kg) with slung load

 

Powerplant:

1× P&W Canada T400-CP-400 (PT6T-3 Twin-Pac) turboshaft engine, 1,800 shp (1,342 kW)

 

Performance:

Maximum speed: 124 mph (200 km/h, 110 kn)

Cruise speed: 105 mph (169 km/h, 91 kn)

Range: 270 mi (430 km, 230 nmi) with internal fuel only,

360 mi (570 km 310 nmi) with external auxiliary tanks

Service ceiling: 15,000 ft (4,600 m)

Hovering ceiling out of ground effect: 3,000 m (9,840 ft)

Rate of climb: 2,500 ft/min (13 m/s) at Sea Level with flat-rated torque

 

External load capacity (at ISA +15 °C (59.0 °F):

6,000 lb (2,722 kg) at sea level

5,663 lb (2,569 kg) at 5,000 ft (1,524 m)

5,163 lb (2,342 kg) at 10,000 ft (3,048 m)

5,013 lb (2,274 kg) at 12,100 ft (3,688 m)

4,313 lb (1,956 kg) at 15,000 ft (4,600 m)

  

The kit and its assembly:

This is/was the second contribution to the late 2022 “Logistics” Group Build at whatifmodellers.com, a welcome occasion and motivation to tackle a what-if project that had been on my list for a long while. This crane helicopter conversion of a HueyCobra was inspired by the Mil Mi-10K helicopter – I had built a 1:100 VEB Plasticart kit MANY years ago and still remembered the helicopter’s unique ventral cabin under the nose with a rearward-facing second pilot. I always thought that the AH-1 might be a good crane helicopter, too, esp. the USMC’s twin-engine variant. And why not combine everything in a fictional model?

 

With this plan the basis became a Fujimi 1:72 AH-1J and lots of donor parts to modify the basic hull into “something else”. Things started with the removal of the chin turret and part of the lower front hull to make space for the ventral glass cabin. The openings for the stub wings were faired over and a different stabilizer (taken from a Revell EC 135, including the end plates) was implanted. The attachment points for the skids were filled and a styrene tube was inserted into the rotor mast opening to later hold the new four-blade rotor. Another styrene tube with bigger diameter was inserted into the lower fuselage as a display holder adapter for later flight scene pictures. Lead beads filled the nose section to make sure the CraneCobra would stand well on its new legs, with the nose down. The cockpit was basically taken OOB, just the front seat and the respective gunner dashboard was omitted.

 

One of the big challenges of this build followed next: the ventral cabin. Over the course of several months, I was not able to find a suitable donor, so I was forced to scratch the cabin from acrylic and styrene sheet. Size benchmark became the gunner’s seat from the Cobra kit, with one of the OOB pilots seated. Cabin width was less dictated through the fuselage, the rest of the cabin’s design became a rather simple, boxy thing – not pretty, but I think a real-life retrofitted cabin would not look much different? Some PSR was done to hide the edges of the rather thick all-clear walls and create a 3D frame - a delicate task. Attaching the completed thing with the second pilot and a dashboard under the roof to the Cobra’s lower hull and making it look more or less natural without major accidents was also a tricky and lengthy affair, because I ignored the Cobra’s narrowing nose above the former chin turret.

 

With the cabin defining the ground helicopter’s clearance, it was time for the next donors: the landing gear from an Airfix 1:72 Kamow Ka-25, which had to be modified further to achieve a proper stance. The long main struts were fixed to the hull, their supporting struts had to be scratched, in this case from steel wire. The front wheels were directly attached to the ventral cabin (which might contain in real life a rigid steel cage that not only protects the second crew member but could also take the front wheels’ loads?). Looks pretty stalky!

Under the hull, a massive hook and a fairing for the oil cooler were added. A PE brass ladder was mounted on the right side of the hull under the pilot’s cockpit, while a rear-view mirror was mounted for the ventral pilot on the left side.

 

The rotor system was created in parallel, I wanted “something different” from the UH-1 dual-blade rotors. The main rotor hub was taken from a Mistercraft 1:72 Westland Lynx (AFAIK a re-boxed ZTS Plastyk kit), which included the arms up to the blades. The hub was put onto a metal axis, with a spacer to make it sit well in the new styrene tube adapter inside of the hull, and some donor parts from the Revell EC 135. Deeper, tailored blades were glued to the Lynx hub, actually leftover parts from the aforementioned wrecked VEB Plasticart 1:100 Mi-10, even though their length had to be halved (what makes you aware how large a Mi-6/10 is compared with an AH-1!). The tail rotor was taken wholesale from the Lynx and stuck to the Cobra’s tail with a steel pin.

  

Painting and markings:

Another pushing factor for this build was the fact that I had a 1:72 Begemot aftermarket decal sheet for the Kamow Ka-27/32 in The Stash™, which features, among many military helicopters, (the) two civil Heliswiss machines – a perfect match!

Using the Swiss Helix’ as design benchmark I adapted their red-over-white paint scheme to the slender AH-1 and eventually ended up with a simple livery with a white belly (acrylic white from the rattle can, after extensive masking of the clear parts with Maskol/latex milk) and a red (Humbrol 19) upper section, with decorative counter-colored cheatlines along the medium waterline. A black anti-glare panel was added in front of the windscreen. The auxiliary tanks were painted white, too, but they were processed separately and mounted just before the final coat of varnish was applied. The PE ladder as well as the rotors were handled similarly.

 

The cockpit and rotor opening interior were painted in a very dark grey (tar black, Revell 06), while the interior of the air intakes was painted bright white (Revell 301). The rotor blades became light grey (Revell 75) with darker leading edges (Humbrol 140), dark grey (Humbrol 164) hubs and yellow tips.

 

For the “HELOG/Heliswiss” tagline the lower white section had to be raised to a medium position on the fuselage, so that they could be placed on the lower flanks under the cockpit. The white civil registration code could not be placed on the tail and ended up on the engine cowling, on red, but this does not look bad or wrong at all.

The cheatlines are also decals from the Ka-32 Begemot sheet, even though they had to be trimmed considerably to fit onto the Cobra’s fuselage – and unfortunately the turned out to be poorly printed and rather brittle, so that I had to improvise and correct the flaws with generic red and white decal lines from TL Modellbau. The white cross on the tail and most stencils came from the Begemot sheet, too. Black, engine soot-hiding areas on the Cobra’s tail were created with generic decal sheet material, too.

 

The rotor blades and the wheels received a black ink treatment to emphasize their details, but this was not done on the hull to avoid a dirty or worn look. After some final details like position lights the model was sealed with semi-matt acrylic varnish, while the rotors became matt.

  

A weird-looking what-if model, but somehow a crane-copter variant of the AH-1 looks quite natural – even more so in its attractive red-and-white civil livery. The stalky landing gear is odd, though, necessitated by the ventral cabin for the second pilot. I was skeptical, but scratching the latter was more successful than expected, and the cabin blend quite well into the AH-1 hull, despite its boxy shape.

 

Sir William Gray, born the son of a draper, in Blyth, Northumberland, was educated in Newcastle and moved to Hartlepool at the age of twenty. Having established a drapers shop at Victoria Street he, like other tradesmen in the town, began to ‘dabble’ in shipping.

 

West Hartlepool honoured their most illustrious shipbuilder by creating him the first Mayor and an Alderman of the first Town Council. He was twice Mayor of Hartlepool. Gray was knighted in 1890 and appointed High Sheriff of the County Durham two years later. .

 

Dressed in mayoral robes and wearing his chain of office he is represented seated in the Chief Magistrate’s chair, with one leg resting on a footstool. He faces towards West Hartlepool’s Municipal Buildings, the plans of which he bears in his right hand.

 

It has been said that although Ralph Ward Jackson founded the town of West Hartlepool, it was William Gray who made it.

 

William Gray started life as a shop keeper – owning a chain of drapers (fabric and clothing outlets) before becoming one of Hartlepool’s most famous and successful business men.

 

His shops were renowned for being very ‘trendy’ and selling the latest most fashionable clothes. William used to make regular journeys to London to pick supplies and stock and this ensured that people would flock from nearby towns to buy clothing from his stores. William owned two stores – one in Hartlepool (now known as old Hartlepool), the other in West Hartlepool.

 

During his shop keeping time William was elected Mayor of Hartlepool, mainly due to his services to the community (his family regularly donated money to local churches and later provided land for the public library). Shortly after this election he sold his chain of shops to a number of men who used to work in them, staying with them for a number of months to help them in their new position.

 

In his time as Mayor and whilst on the shipbuilding committee William’s interest in ship building grew – his interest probably also grew from his father who owned several small wooden ships. He met many contacts in ship building and he formed a partnership with one of them a Mr John Punshon Denton. They both knew that the ship building industry was moving forward and steel was becoming the material of choice for ship builders.

 

In their first year as business partners and under the name of ‘Denton, Gray & Co’ the two launched their first iron built ship the Dalhousie (later renamed the Sepia). Their business flourished over the coming years and the ships build quality and excellent designs gained the company world wide recognition until the unfortunate death of his business partner Mr J.P. Denton some 9 years later. After his partners death William renamed the company to William Gray & Co at the same time taking on his oldest son as partner.

 

Under his management the newly-named William Gray & Co. became West Hartlepool’s largest producer of clipper barques, sailing ships and steamers. Orders flooded in from home and abroad and the company’s vessels worked the oceans of the world. A new shipyard and engineering works were opened, and the firm, employer to some 2,000 men in the 1880s, won the Blue Riband for the maximum output of any British yard in 1878, 82, 88, 95, 98, and 1900. In 1891 Gray became the President of the Chamber of Shipping for the United Kingdom.

 

13 years on William Gray became the first Mayor of West Hartlepool – the only person ever to have been Mayor of both towns. Two years later In 1890 Queen Victoria knighted him for his services he gave and the generous donations he offered to both Hartlepool and West Hartlepool and also the village Greatham where he was now living.

 

William Gray continued his ship building empire and continued to give generously to local people until his death on the 12th September 1898. One the day of his funeral thousands lined the streets as a parade of 1000’s of workers from his ship yard marched along with his coffin to his grave to give their respect – almost all of the towns shops, banks and other businesses closed for the day.

 

His youngest son took over William Gray & Co and the ship yard went on to provide 100’s of jobs for local people for over 100 years. Funded by public subscription the statue was erected during the lifetime of Sir William Gray. Although he requested that there be no public ceremony, a large crowd gathered in Church Square for the unveiling at 12 noon on 26th March 1898. Alderman Clarkson, the Chairman of the subscription committee, was due to uncover the drapery but was denied the honour. As the clock struck 12 and ‘Alderman Clarkson was about to step from the door of the Municipal building to perform the duty the wind which was blowing a terrific gale, got under the covering, and most unceremoniously…completely unveiled the statue.’ Sir William died on 13th September later that year.

 

William Day Keyworth the Elder was the son of a marble mason from the town of Hull, who when Keyworth was a child, moved to London and worked for Chantrey. Keyworth studied under Henry Weekes (himself a pupil of Chantrey) in London, and then went back to his home town OF hULL in 1834 to set up as a sculptor in his own right. By 1892 he is listed in a Hull gazetteer as at 54 Savile Street and 244 Spring Bank, as ‘William Day Keyworth and Son, monumental masons and sculptors’. His sculptor son (b. 1843, see below) means that with his mason father, we have something of a Hull dynasty of sculptors.

 

Keyworth produced several works which remained in Hull, including church monuments and busts (after his death some of his unsold works were left to that city, unfortunately being destroyed when Hull Central Museum was bombed in World War II). He exhibited at the Royal Academy in the late 1830s and early 1840s, and later worked as an architect, and made casts of medieval architecture for the 1851 Exhibition.

 

Keyworth Sr’s remaining works are not particularly prolific, and I have not seen what survives by him in Hull. What does survive consists mainly of busts and slighter church monuments in Yorkshire and Lancashire.

 

William Day Keyworth junior (1843-1902) studied sculpture in London, and was responsible for a variety of works in Hull, including statues of Michael de la Pole (Hull’s first mayor), Wilberforce for Wilberforce House, and Andrew Marvell. In Leeds may be found his stone lions in front of Leeds Town Hall (picture above), and a reclining effigy of Dr Hook is in the Leeds Parish Church. He has a good seated figure of William Gray in Hartlepool. In London he sculpted the memorial bust to Rowland Hill, in Westminster Abbey. He suffered financial problems in later life, and committed suicide in 1902.

 

Hartlepool is a seaside and port town in County Durham, England. It is governed by a unitary authority borough named after the town. The borough is part of the devolved Tees Valley area. With an estimated population of 87,995, it is the second-largest settlement (after Darlington) in County Durham.

 

The old town was founded in the 7th century, around the monastery of Hartlepool Abbey on a headland. As the village grew into a town in the Middle Ages, its harbour served as the County Palatine of Durham's official port. The new town of West Hartlepool was created in 1835 after a new port was built and railway links from the South Durham coal fields (to the west) and from Stockton-on-Tees (to the south) were created. A parliamentary constituency covering both the old town and West Hartlepool was created in 1867 called The Hartlepools. The two towns were formally merged into a single borough called Hartlepool in 1967. Following the merger, the name of the constituency was changed from The Hartlepools to just Hartlepool in 1974. The modern town centre and main railway station are both at what was West Hartlepool; the old town is now generally known as the Headland.

 

Industrialisation in northern England and the start of a shipbuilding industry in the later part of the 19th century meant it was a target for the Imperial German Navy at the beginning of the First World War. A bombardment of 1,150 shells on 16 December 1914 resulted in the death of 117 people in the town. A severe decline in heavy industries and shipbuilding following the Second World War caused periods of high unemployment until the 1990s when major investment projects and the redevelopment of the docks area into a marina saw a rise in the town's prospects. The town also has a seaside resort called Seaton Carew.

 

History

The place name derives from Old English heort ("hart"), referring to stags seen, and pōl (pool), a pool of drinking water which they were known to use. Records of the place-name from early sources confirm this:

 

649: Heretu, or Hereteu.

1017: Herterpol, or Hertelpolle.

1182: Hierdepol.

 

Town on the heugh

A Northumbrian settlement developed in the 7th century around an abbey founded in 640 by Saint Aidan (an Irish and Christian priest) upon a headland overlooking a natural harbour and the North Sea. The monastery became powerful under St Hilda, who served as its abbess from 649 to 657. The 8th-century Northumbrian chronicler Bede referred to the spot on which today's town is sited as "the place where deer come to drink", and in this period the Headland was named by the Angles as Heruteu (Stag Island). Archaeological evidence has been found below the current high tide mark that indicates that an ancient post-glacial forest by the sea existed in the area at the time.

 

The Abbey fell into decline in the early 8th century, and it was probably destroyed during a sea raid by Vikings on the settlement in the 9th century. In March 2000, the archaeological investigation television programme Time Team located the foundations of the lost monastery in the grounds of St Hilda's Church. In the early 11th century, the name had evolved into Herterpol.

 

Hartness

Normans and for centuries known as the Jewel of Herterpol.

During the Norman Conquest, the De Brus family gained over-lordship of the land surrounding Hartlepool. William the Conqueror subsequently ordered the construction of Durham Castle, and the villages under their rule were mentioned in records in 1153 when Robert de Brus, 1st Lord of Annandale became Lord of Hartness. The town's first charter was received before 1185, for which it gained its first mayor, an annual two-week fair and a weekly market. The Norman Conquest affected the settlement's name to form the Middle English Hart-le-pool ("The Pool of the Stags").

 

By the Middle Ages, Hartlepool was growing into an important (though still small) market town. One of the reasons for its escalating wealth was that its harbour was serving as the official port of the County Palatine of Durham. The main industry of the town at this time was fishing, and Hartlepool in this period established itself as one of the primary ports upon England's Eastern coast.

 

In 1306, Robert the Bruce was crowned King of Scotland, and became the last Lord of Hartness. Angered, King Edward I confiscated the title to Hartlepool, and began to improve the town's military defences in expectation of war. In 1315, before they were completed, a Scottish army under Sir James Douglas attacked, captured and looted the town.

 

In the late 15th century, a pier was constructed to assist in the harbour's workload.

 

Garrison

Hartlepool was once again militarily occupied by a Scottish incursion, this time in alliance with the Parliamentary Army during the English Civil War, which after 18 months was relieved by an English Parliamentarian garrison.

 

In 1795, Hartlepool artillery emplacements and defences were constructed in the town as a defensive measure against the threat of French attack from seaborne Napoleonic forces. During the Crimean War, two coastal batteries were constructed close together in the town to guard against the threat of seaborne attacks from the Imperial Russian Navy. They were entitled the Lighthouse Battery (1855) and the Heugh Battery (1859).

 

Hartlepool in the 18th century became known as a town with medicinal springs, particularly the Chalybeate Spa near the Westgate. The poet Thomas Gray visited the town in July 1765 to "take the waters", and wrote to his friend William Mason:

 

I have been for two days to taste the water, and do assure you that nothing could be salter and bitterer and nastier and better for you... I am delighted with the place; there are the finest walks and rocks and caverns.

 

A few weeks later, he wrote in greater detail to James Brown:

 

The rocks, the sea and the weather there more than made up to me the want of bread and the want of water, two capital defects, but of which I learned from the inhabitants not to be sensible. They live on the refuse of their own fish-market, with a few potatoes, and a reasonable quantity of Geneva [gin] six days in the week, and I have nowhere seen a taller, more robust or healthy race: every house full of ruddy broad-faced children. Nobody dies but of drowning or old-age: nobody poor but from drunkenness or mere laziness.

 

Town by the strand

By the early nineteenth century, Hartlepool was still a small town of around 900 people, with a declining port. In 1823, the council and Board of Trade decided that the town needed new industry, so the decision was made to propose a new railway to make Hartlepool a coal port, shipping out minerals from the Durham coalfield. It was in this endeavour that Isambard Kingdom Brunel visited the town in December 1831, and wrote: "A curiously isolated old fishing town – a remarkably fine race of men. Went to the top of the church tower for a view."

 

But the plan faced local competition from new docks. 25 kilometres (16 mi) to the north, the Marquis of Londonderry had approved the creation of the new Seaham Harbour (opened 31 July 1831), while to the south the Clarence Railway connected Stockton-on-Tees and Billingham to a new port at Port Clarence (opened 1833). Further south again, in 1831 the Stockton and Darlington Railway had extended into the new port of Middlesbrough.

 

The council agreed the formation of the Hartlepool Dock and Railway Company (HD&RCo) to extend the existing port by developing new docks, and link to both local collieries and the developing railway network in the south. In 1833, it was agreed that Christopher Tennant of Yarm establish the HD&RCo, having previously opened the Clarence Railway (CR). Tennant's plan was that the HD&RCo would fund the creation of a new railway, the Stockton and Hartlepool Railway, which would take over the loss-making CR and extended it north to the new dock, thereby linking to the Durham coalfield.

 

After Tennant died, in 1839, the running of the HD&RCo was taken over by Stockton-on-Tees solicitor, Ralph Ward Jackson. But Jackson became frustrated at the planning restrictions placed on the old Hartlepool dock and surrounding area for access, so bought land which was mainly sand dunes to the south-west, and established West Hartlepool. Because Jackson was so successful at shipping coal from West Hartlepool through his West Hartlepool Dock and Railway Company and, as technology developed, ships grew in size and scale, the new town would eventually dwarf the old town.

 

The 8-acre (3.2-hectare) West Hartlepool Harbour and Dock opened on 1 June 1847. On 1 June 1852, the 14-acre (5.7-hectare) Jackson Dock opened on the same day that a railway opened connecting West Hartlepool to Leeds, Manchester and Liverpool. This allowed the shipping of coal and wool products eastwards, and the shipping of fresh fish and raw fleeces westwards, enabling another growth spurt in the town. This in turn resulted in the opening of the Swainson Dock on 3 June 1856, named after Ward Jackson's father-in-law. In 1878, the William Gray & Co shipyard in West Hartlepool achieved the distinction of launching the largest tonnage of any shipyard in the world, a feat to be repeated on a number of occasions. By 1881, old Hartlepool's population had grown from 993 to 12,361, but West Hartlepool had a population of 28,000.

 

Ward Jackson Park

Ward Jackson helped to plan the layout of West Hartlepool and was responsible for the first public buildings. He was also involved in the education and the welfare of the inhabitants. In the end, he was a victim of his own ambition to promote the town: accusations of shady financial dealings, and years of legal battles, left him in near-poverty. He spent the last few years of his life in London, far away from the town he had created.

 

World Wars

In Hartlepool near Heugh Battery, a plaque in Redheugh Gardens War Memorial "marks the place where the first ...(German shell) struck... (and) the first soldier was killed on British soil by enemy action in the Great War 1914–1918."

The area became heavily industrialised with an ironworks (established in 1838) and shipyards in the docks (established in the 1870s). By 1913, no fewer than 43 ship-owning companies were located in the town, with the responsibility for 236 ships. This made it a key target for Germany in the First World War. One of the first German offensives against Britain was a raid and bombardment by the Imperial German Navy on the morning of 16 December 1914,

 

Hartlepool was hit with a total of 1150 shells, killing 117 people. Two coastal defence batteries at Hartlepool returned fire, launching 143 shells, and damaging three German ships: SMS Seydlitz, SMS Moltke and SMS Blücher. The Hartlepool engagement lasted roughly 50 minutes, and the coastal artillery defence was supported by the Royal Navy in the form of four destroyers, two light cruisers and a submarine, none of which had any significant impact on the German attackers.

 

Private Theophilus Jones of the 18th Battalion Durham Light Infantry, who fell as a result of this bombardment, is sometimes described as the first military casualty on British soil by enemy fire. This event (the death of the first soldiers on British soil) is commemorated by the 1921 Redheugh Gardens War Memorial together with a plaque unveiled on the same day (seven years and one day after the East Coast Raid) at the spot on the Headland (the memorial by Philip Bennison illustrates four soldiers on one of four cartouches and the plaque, donated by a member of the public, refers to the 'first soldier' but gives no name). A living history group, the Hartlepool Military Heritage Memorial Society, portray men of that unit for educational and memorial purposes.

 

Hartlepudlians voluntarily subscribed more money per head to the war effort than any other town in Britain.

 

On 4 January 1922, a fire starting in a timber yard left 80 people homeless and caused over £1,000,000 of damage. Hartlepool suffered badly in the Great Depression of the 1930s and endured high unemployment.

 

Unemployment decreased during the Second World War, with shipbuilding and steel-making industries enjoying a renaissance. Most of its output for the war effort were "Empire Ships". German bombers raided the town 43 times, though, compared to the previous war, civilian losses were lighter with 26 deaths recorded by Hartlepool Municipal Borough[19] and 49 by West Hartlepool Borough. During the Second World War, RAF Greatham (also known as RAF West Hartlepool) was located on the South British Steel Corporation Works.

 

The merge

In 1891, the two towns had a combined population of 64,000. By 1900, the two Hartlepools were, together, one of the three busiest ports in England.

 

The modern town represents a joining of "Old Hartlepool", locally known as the "Headland", and West Hartlepool. As already mentioned, what was West Hartlepool became the larger town and both were formally unified in 1967. Today the term "West Hartlepool" is rarely heard outside the context of sport, but one of the town's Rugby Union teams still retains the name.

 

The name of the town's professional football club reflected both boroughs; when it was formed in 1908, following the success of West Hartlepool in winning the FA Amateur Cup in 1905, it was called "Hartlepools United" in the hope of attracting support from both towns. When the boroughs combined in 1967, the club renamed itself "Hartlepool" before re-renaming itself Hartlepool United in the 1970s. Many fans of the club still refer to the team as "Pools"

 

Fall out

After the war, industry went into a severe decline. Blanchland, the last ship to be constructed in Hartlepool, left the slips in 1961. In 1967, Betty James wrote how "if I had the luck to live anywhere in the North East [of England]...I would live near Hartlepool. If I had the luck". There was a boost to the retail sector in 1970 when Middleton Grange Shopping Centre was opened by Princess Anne, with over 130 new shops including Marks & Spencer and Woolworths.

 

Before the shopping centre was opened, the old town centre was located around Lynn Street, but most of the shops and the market had moved to a new shopping centre by 1974. Most of Lynn Street had by then been demolished to make way for a new housing estate. Only the north end of the street remains, now called Lynn Street North. This is where the Hartlepool Borough Council depot was based (alongside the Focus DIY store) until it moved to the marina in August 2006.

 

In 1977, the British Steel Corporation announced the closure of its Hartlepool steelworks with the loss of 1500 jobs. In the 1980s, the area was afflicted with extremely high levels of unemployment, at its peak consisting of 30 per cent of the town's working-age population, the highest in the United Kingdom. 630 jobs at British Steel were lost in 1983, and a total of 10,000 jobs were lost from the town in the economic de-industrialization of England's former Northern manufacturing heartlands. Between 1983 and 1999, the town lacked a cinema and areas of it became afflicted with the societal hallmarks of endemic economic poverty: urban decay, high crime levels, drug and alcohol dependency being prevalent.

 

Rise and the future

Docks near the centre were redeveloped and reopened by Queen Elizabeth II in 1993 as a marina with the accompanying National Museum of the Royal Navy opened in 1994, then known as the Hartlepool Historic Quay.

 

A development corporation is under consultation until August 2022 to organise projects, with the town's fund given to the town and other funds. Plans would be (if the corporation is formed) focused on the railway station, waterfront (including the Royal Navy Museum and a new leisure centre) and Church Street. Northern School of Art also has funds for a TV and film studios.

 

Governance

There is one main tier of local government covering Hartlepool, at unitary authority level: Hartlepool Borough Council. There is a civil parish covering Headland, which forms an additional tier of local government for that area; most of the rest of the urban area is an unparished area. The borough council is a constituent member of the Tees Valley Combined Authority, led by the directly elected Tees Valley Mayor. The borough council is based at the Civic Centre on Victoria Road.

 

Hartlepool was historically a township in the ancient parish of Hart. Hartlepool was also an ancient borough, having been granted a charter by King John in 1200. The borough was reformed to become a municipal borough in 1850. The council built Hartlepool Borough Hall to serve as its headquarters, being completed in 1866.

 

West Hartlepool was laid out on land outside Hartlepool's historic borough boundaries, in the neighbouring parish of Stranton. A body of improvement commissioners was established to administer the new town in 1854. The commissioners were superseded in 1887, when West Hartlepool was also incorporated as a municipal borough. The new borough council built itself a headquarters at the Municipal Buildings on Church Square, which was completed in 1889. An events venue and public hall on Raby Road called West Hartlepool Town Hall was subsequently completed in 1897. In 1902 West Hartlepool was elevated to become a county borough, making it independent from Durham County Council. The old Hartlepool Borough Council amalgamated with West Hartlepool Borough Council in 1967 to form a county borough called Hartlepool.

 

In 1974 the borough was enlarged to take in eight neighbouring parishes, and was transferred to the new county of Cleveland. Cleveland was abolished in 1996 following the Banham Review, which gave unitary authority status to its four districts, including Hartlepool. The borough was restored to County Durham for ceremonial purposes under the Lieutenancies Act 1997, but as a unitary authority it is independent from Durham County Council.

 

Emergency services

Hartlepool falls within the jurisdiction of Cleveland Fire Brigade and Cleveland Police. Before 1974, it was under the jurisdiction of the Durham Constabulary and Durham Fire Brigade. Hartlepool has two fire stations: a full-time station at Stranton and a retained station on the Headland.

 

Economy

Hartlepool's economy has historically been linked with the maritime industry, something which is still at the heart of local business. Hartlepool Dock is owned and run by PD Ports. Engineering related jobs employ around 1700 people. Tata Steel Europe employ around 350 people in the manufacture of steel tubes, predominantly for the oil industry. South of the town on the banks of the Tees, Able UK operates the Teesside Environmental Reclamation and Recycling Centre (TERRC), a large scale marine recycling facility and dry dock. Adjacent to the east of TERRC is the Hartlepool nuclear power station, an advanced gas-cooled reactor (AGR) type nuclear power plant opened in the 1980s. It is the single largest employer in the town, employing 1 per cent of the town's working age people.

 

The chemicals industry is important to the local economy. Companies include Huntsman Corporation, who produce titanium dioxide for use in paints, Omya, Baker Hughes and Frutarom.

 

Tourism was worth £48 million to the town in 2009; this figure excludes the impact of the Tall Ships 2010. Hartlepool's historic links to the maritime industry are centred on the Maritime Experience, and the supporting exhibits PS Wingfield Castle and HMS Trincomalee.

 

Camerons Brewery was founded in 1852 and currently employs around 145 people. It is one of the largest breweries in the UK. Following a series of take-overs, it came under the control of the Castle Eden Brewery in 2001 who merged the two breweries, closing down the Castle Eden plant. It brews a range of cask and bottled beers, including Strongarm, a 4% abv bitter. The brewery is heavily engaged in contract brewing such beers as Kronenbourg 1664, John Smith's and Foster's.

 

Orchid Drinks of Hartlepool were formed in 1992 after a management buy out of the soft drinks arm of Camerons. They manufactured Purdey's and Amé. Following a £67 million takeover by Britvic, the site was closed down in 2009.

 

Middleton Grange Shopping Centre is the main shopping location. 2800 people are employed in retail. The ten major retail companies in the town are Tesco, Morrisons, Asda, Next, Argos, Marks & Spencer, Aldi, Boots and Matalan. Aside from the local sports clubs, other local entertainment venues include a VUE Cinema and Mecca Bingo.

 

Companies that have moved operations to the town for the offshore wind farm include Siemens and Van Oord.

 

Culture and community

Festivals and Fairs

Since November 2014 the Headland has hosted the annual Wintertide Festival, which is a weekend long event that starts with a community parade on the Friday and culminating in a finale performance and fireworks display on the Sunday.

 

Tall Ships' Races

On 28 June 2006 Hartlepool celebrated after winning its bid to host The Tall Ships' Races. The town welcomed up to 125 tall ships in 2010, after being chosen by race organiser Sail Training International to be the finishing point for the race. Hartlepool greeted the ships, which sailed from Kristiansand in Norway on the second and final leg of the race. Hartlepool also hosted the race in July 2023.

 

Museums, art galleries and libraries

Hartlepool Art Gallery is located in Church Square within Christ Church, a restored Victorian church, built in 1854 and designed by the architect Edward Buckton Lamb (1806–1869). The gallery's temporary exhibitions change frequently and feature works from local artists and the permanent Fine Art Collection, which was established by Sir William Gray. The gallery also houses the Hartlepool tourist information centre.

 

The Heugh Battery Museum is located on the Headland. It was one of three batteries erected to protect Hartlepool's port in 1860. The battery was closed in 1956 and is now in the care of the Heugh Gun Battery Trust and home to an artillery collection.

 

Hartlepool is home to a National Museum of the Royal Navy (more specifically the NMRN Hartlepool). Previously known simply as The Historic Quay and Hartlepool's Maritime Experience, the museum is a re-creation of an 18th-century seaport with the exhibition centre-piece being a sailing frigate, HMS Trincomalee. The complex also includes the Museum of Hartlepool.

 

Willows was the Hartlepool mansion of the influential Sir William Gray of William Gray & Company and he gifted it to the town in 1920, after which it was converted to be the town's first museum and art gallery. Fondly known locally as "The Gray" it was closed as a museum in 1994 and now houses the local authority's culture department.

 

There are six libraries in Hartlepool, the primary one being the Community Hub Central Library. Others are Throston Grange Library, Community Hub North Library, Seaton Carew Library, Owton Manor Library and Headland Branch Library.

 

Sea

Hartlepool has been a major seaport virtually since it was founded, and has a long fishing heritage. During the industrial revolution massive new docks were created on the southern side of the channel running below the Headland, which gave rise to the town of West Hartlepool.

 

Now owned by PD Ports, the docks are still in use today and still capable of handling large vessels. However, a large portion of the former dockland was converted into a marina capable of berthing 500 vessels. Hartlepool Marina is home to a wide variety of pleasure and working craft, with passage to and from the sea through a lock.

 

Hartlepool also has a permanent RNLI lifeboat station.

 

Education

Secondary

Hartlepool has five secondary schools:

 

Dyke House Academy

English Martyrs School and Sixth Form College

High Tunstall College of Science

Manor Community Academy

St Hild's Church of England School

The town had planned to receive funding from central government to improve school buildings and facilities as a part of the Building Schools for the Future programme, but this was cancelled because of government spending cuts.

 

College

Hartlepool College of Further Education is an educational establishment located in the centre of the town, and existed in various forms for over a century. Its former 1960s campus was replaced by a £52million custom-designed building, it was approved in principle in July 2008, opened in September 2011.

 

Hartlepool also has Hartlepool Sixth Form College. It was a former grammar and comprehensive school, the college provides a number of AS and A2 Level student courses. The English Martyrs School and Sixth Form College also offers AS, A2 and other BTEC qualification to 16- to 18-year-olds from Hartlepool and beyond.

 

A campus of The Northern School of Art is a specialist art and design college and higher education, located adjacent to the art gallery on Church Square. The college has a further site in Middlesbrough that facilitates further education.

 

Territorial Army

Situated in the New Armoury Centre, Easington Road are the following units.

 

Royal Marines Reserve

90 (North Riding) Signal Squadron

 

Religion

They are multiple Church of England and Roman Catholic Churches in the town. St Hilda's Church is a notable church of the town, it was built on Hartlepool Abbey and sits upon a high point of the Headland. The churches of the Church of England's St Paul and Roman Catholic's St Joseph are next to each other on St Paul's Road. Nasir Mosque on Brougham Terrace is the sole purpose-built mosque in the town.

 

Sport

Football

Hartlepool United is the town's professional football club and they play at Victoria Park. The club's most notable moment was in 2005 when, with 8 minutes left in the 2005 Football League One play-off final, the team conceded a penalty, allowing Sheffield Wednesday to equalise and eventually beat Hartlepool to a place in the Championship. The club currently play in the National League.

 

Supporters of the club bear the nickname of Monkey Hangers. This is based upon a legend that during the Napoleonic wars a monkey, which had been a ship's mascot, was taken for a French spy and hanged. Hartlepool has also produced football presenter Jeff Stelling, who has a renowned partnership with Chris Kamara who was born in nearby Middlesbrough. Jeff Stelling is a keen supporter of Hartlepool and often refers to them when presenting Sky Sports News. It is also the birthplace and childhood home of Pete Donaldson, one of the co-hosts of the Football Ramble podcast as well as co-host of the Abroad in Japan podcast, and a prominent radio DJ.

 

The town also has a semi-professional football club called FC Hartlepool who play in Northern League Division Two.

 

Rugby union

Hartlepool is something of an anomaly in England having historically maintained a disproportionate number of clubs in a town of only c.90,000 inhabitants. These include(d) West Hartlepool, Hartlepool Rovers, Hartlepool Athletic RFC, Hartlepool Boys Brigade Old Boys RFC (BBOB), Seaton Carew RUFC (formerly Hartlepool Grammar School Old Boys), West Hartlepool Technical Day School Old Boys RUFC (TDSOB or Tech) and Hartlepool Old Boys' RFC (Hartlepool). Starting in 1904 clubs within eight miles (thirteen kilometres) of the headland were eligible to compete for the Pyman Cup which has been contested regularly since and that the Hartlepool & District Union continue to organise.

 

Perhaps the best known club outside the town is West Hartlepool R.F.C. who in 1992 achieved promotion to what is now the Premiership competing in 1992–93, 1994–95, 1995–96 and 1996–97 seasons. This success came at a price as soon after West was then hit by bankruptcy and controversially sold their Brierton Lane stadium and pitch to former sponsor Yuills Homes. There then followed a succession of relegations before the club stabilised in the Durham/Northumberland leagues. West and Rovers continue to play one another in a popular Boxing Day fixture which traditionally draws a large crowd.

 

Hartlepool Rovers, formed in 1879, who played at the Old Friarage in the Headland area of Hartlepool before moving to West View Road. In the 1890s Rovers supplied numerous county, divisional and international players. The club itself hosted many high-profile matches including the inaugural Barbarians F.C. match in 1890, the New Zealand Maoris in 1888 and the legendary All Blacks who played against a combined Hartlepool Club team in 1905. In the 1911–12 season, Hartlepool Rovers broke the world record for the number of points scored in a season racking up 860 points including 122 tries, 87 conversions, five penalties and eleven drop goals.

 

Although they ceased competing in the RFU leagues in 2008–09, West Hartlepool TDSOB (Tech) continues to support town and County rugby with several of the town's other clubs having played at Grayfields when their own pitches were unavailable. Grayfields has also hosted a number of Durham County cup finals as well as County Under 16, Under 18 and Under 20 age group games.

 

Olympics

Boxing

At the 2012 Summer Olympics, 21-year-old Savannah Marshall, who attended English Martyrs School and Sixth Form College in the town of Hartlepool, competed in the Women's boxing tournament of the 2012 Olympic Games. She was defeated 12–6 by Marina Volnova of Kazakhstan in her opening, quarter-final bout. Savannah Marshall is now a professional boxer, currently unbeaten as a pro and on 31 October 2020 in her 9th professional fight Marshall became the WBO female middleweight champion with a TKO victory over opponent Hannah Rankin at Wembley Arena.

 

Swimming

In August 2012 Jemma Lowe, a British record holder who attended High Tunstall College of Science in the town of Hartlepool, competed in the 2012 Olympic Games. She finished sixth in the 200-metre butterfly final with a time of 58.06 seconds. She was also a member of the eighth-place British team in the 400m Medley relay.

 

Monkeys

Hartlepool is known for allegedly executing a monkey during the Napoleonic Wars. According to legend, fishermen from Hartlepool watched a French warship founder off the coast, and the only survivor was a monkey, which was dressed in French military uniform, presumably to amuse the officers on the ship. The fishermen assumed that this must be what Frenchmen looked like and, after a brief trial, summarily executed the monkey.

 

Historians have pointed to the prior existence of a Scottish folk song called "And the Boddamers hung the Monkey-O". It describes how a monkey survived a shipwreck off the village of Boddam near Peterhead in Aberdeenshire. Because the villagers could only claim salvage rights if there were no survivors from the wreck, they allegedly hanged the monkey. There is also an English folk song detailing the later event called, appropriately enough, "The Hartlepool Monkey". In the English version the monkey is hanged as a French spy.

 

"Monkey hanger" and Chimp Choker are common terms of (semi-friendly) abuse aimed at "Poolies", often from footballing rivals Darlington. The mascot of Hartlepool United F.C. is H'Angus the monkey. The man in the monkey costume, Stuart Drummond, stood for the post of mayor in 2002 as H'angus the monkey, and campaigned on a platform which included free bananas for schoolchildren. To widespread surprise, he won, becoming the first directly elected mayor of Hartlepool, winning 7,400 votes with a 52% share of the vote and a turnout of 30%. He was re-elected by a landslide in 2005, winning 16,912 on a turnout of 51% – 10,000 votes more than his nearest rival, the Labour Party candidate.

 

The monkey legend is also linked with two of the town's sports clubs, Hartlepool Rovers RFC, which uses the hanging monkey as the club logo. Hartlepool (Old Boys) RFC use a hanging monkey kicking a rugby ball as their tie crest.

 

Notable residents

Michael Brown, former Premier League footballer

Edward Clarke, artist

Brian Clough, football manager who lived in the Fens estate in town while manager of Hartlepools United

John Darwin, convicted fraudster who faked his own death

Pete Donaldson, London radio DJ and podcast host

Janick Gers, guitarist from British heavy metal band Iron Maiden

Courtney Hadwin, singer

Jack Howe, former England international footballer

Liam Howe, music producer and songwriter for several artists and member of the band Sneaker Pimps

Saxon Huxley, WWE NXT UK wrestler

Andy Linighan, former Arsenal footballer who scored the winning goal in the 1993 FA Cup Final

Savannah Marshall, professional boxer

Stephanie Aird, comedian and television personality

Jim Parker, composer

Guy Pearce, film actor who lived in the town when he was younger as his mother was from the town

Narbi Price, artist

Jack Rowell, coached the England international rugby team and led them to the semi-final of the 1995 Rugby World Cup

Wayne Sleep, dancer and actor who spent his childhood in the town.

Reg Smythe, cartoonist who created Andy Capp

Jeremy Spencer, guitarist who was in the original Fleetwood Mac line-up

Jeff Stelling, TV presenter, famous for hosting Gillette Soccer Saturday

David Eagle, Folk singer and stand-up comedian,

Local media

Hartlepool Life - local free newspaper

Hartlepool Mail – local newspaper

BBC Radio Tees – BBC local radio station

Radio Hartlepool – Community radio station serving the town

Hartlepool Post – on-line publication

Local television news programmes are BBC Look North and ITV News Tyne Tees.

 

Town twinning

Hartlepool is twinned with:

France Sète, France

Germany Hückelhoven, Germany (since 1973)

United States Muskegon, Michigan

Malta Sliema, Malta

 

County Durham, officially simply Durham is a ceremonial county in North East England. The county borders Northumberland and Tyne and Wear to the north, the North Sea to the east, North Yorkshire to the south, and Cumbria to the west. The largest settlement is Darlington, and the county town is the city of Durham.

 

The county has an area of 2,721 km2 (1,051 sq mi) and a population of 866,846. The latter is concentrated in the east; the south-east is part of the Teesside built-up area, which extends into North Yorkshire. After Darlington (92,363), the largest settlements are Hartlepool (88,855), Stockton-on-Tees (82,729), and Durham (48,069). For local government purposes the county comprises three unitary authority areas—County Durham, Darlington, and Hartlepool—and part of a fourth, Stockton-on-Tees. The county historically included the part of Tyne and Wear south of the River Tyne, and excluded the part of County Durham south of the River Tees.

 

The west of the county contains part of the North Pennines uplands, a national landscape. The hills are the source of the rivers Tees and Wear, which flow east and form the valleys of Teesdale and Weardale respectively. The east of the county is flatter, and contains by rolling hills through which the two rivers meander; the Tees forms the boundary with North Yorkshire in its lower reaches, and the Wear exits the county near Chester-le-Street in the north-east. The county's coast is a site of special scientific interest characterised by tall limestone and dolomite cliffs.

 

What is now County Durham was on the border of Roman Britain, and contains survivals of this era at sites such as Binchester Roman Fort. In the Anglo-Saxon period the region was part of the Kingdom of Northumbria. In 995 the city of Durham was founded by monks seeking a place safe from Viking raids to house the relics of St Cuthbert. Durham Cathedral was rebuilt after the Norman Conquest, and together with Durham Castle is now a World Heritage Site. By the late Middle Ages the county was governed semi-independently by the bishops of Durham and was also a buffer zone between England and Scotland. County Durham became heavily industrialised in the nineteenth century, when many collieries opened on the Durham coalfield. The Stockton and Darlington Railway, the world's first public railway to use steam locomotives, opened in 1825. Most collieries closed during the last quarter of the twentieth century, but the county's coal mining heritage is remembered in the annual Durham Miners' Gala.

 

Remains of Prehistoric Durham include a number of Neolithic earthworks.

 

The Crawley Edge Cairns and Heathery Burn Cave are Bronze Age sites. Maiden Castle, Durham is an Iron Age site.

 

Brigantia, the land of the Brigantes, is said to have included what is now County Durham.

 

There are archaeological remains of Roman Durham. Dere Street and Cade's Road run through what is now County Durham. There were Roman forts at Concangis (Chester-le-Street), Lavatrae (Bowes), Longovicium (Lanchester), Piercebridge (Morbium), Vindomora (Ebchester) and Vinovium (Binchester). (The Roman fort at Arbeia (South Shields) is within the former boundaries of County Durham.) A Romanised farmstead has been excavated at Old Durham.

 

Remains of the Anglo-Saxon period include a number of sculpted stones and sundials, the Legs Cross, the Rey Cross and St Cuthbert's coffin.

 

Around AD 547, an Angle named Ida founded the kingdom of Bernicia after spotting the defensive potential of a large rock at Bamburgh, upon which many a fortification was thenceforth built. Ida was able to forge, hold and consolidate the kingdom; although the native British tried to take back their land, the Angles triumphed and the kingdom endured.

 

In AD 604, Ida's grandson Æthelfrith forcibly merged Bernicia (ruled from Bamburgh) and Deira (ruled from York, which was known as Eforwic at the time) to create the Kingdom of Northumbria. In time, the realm was expanded, primarily through warfare and conquest; at its height, the kingdom stretched from the River Humber (from which the kingdom drew its name) to the Forth. Eventually, factional fighting and the rejuvenated strength of neighbouring kingdoms, most notably Mercia, led to Northumbria's decline. The arrival of the Vikings hastened this decline, and the Scandinavian raiders eventually claimed the Deiran part of the kingdom in AD 867 (which became Jórvík). The land that would become County Durham now sat on the border with the Great Heathen Army, a border which today still (albeit with some adjustments over the years) forms the boundaries between Yorkshire and County Durham.

 

Despite their success south of the river Tees, the Vikings never fully conquered the Bernician part of Northumbria, despite the many raids they had carried out on the kingdom. However, Viking control over the Danelaw, the central belt of Anglo-Saxon territory, resulted in Northumbria becoming isolated from the rest of Anglo-Saxon Britain. Scots invasions in the north pushed the kingdom's northern boundary back to the River Tweed, and the kingdom found itself reduced to a dependent earldom, its boundaries very close to those of modern-day Northumberland and County Durham. The kingdom was annexed into England in AD 954.

 

In AD 995, St Cuthbert's community, who had been transporting Cuthbert's remains around, partly in an attempt to avoid them falling into the hands of Viking raiders, settled at Dunholm (Durham) on a site that was defensively favourable due to the horseshoe-like path of the River Wear. St Cuthbert's remains were placed in a shrine in the White Church, which was originally a wooden structure but was eventually fortified into a stone building.

 

Once the City of Durham had been founded, the Bishops of Durham gradually acquired the lands that would become County Durham. Bishop Aldhun began this process by procuring land in the Tees and Wear valleys, including Norton, Stockton, Escomb and Aucklandshire in 1018. In 1031, King Canute gave Staindrop to the Bishops. This territory continued to expand, and was eventually given the status of a liberty. Under the control of the Bishops of Durham, the land had various names: the "Liberty of Durham", "Liberty of St Cuthbert's Land" "the lands of St Cuthbert between Tyne and Tees" or "the Liberty of Haliwerfolc" (holy Wear folk).

 

The bishops' special jurisdiction rested on claims that King Ecgfrith of Northumbria had granted a substantial territory to St Cuthbert on his election to the see of Lindisfarne in 684. In about 883 a cathedral housing the saint's remains was established at Chester-le-Street and Guthfrith, King of York granted the community of St Cuthbert the area between the Tyne and the Wear, before the community reached its final destination in 995, in Durham.

 

Following the Norman invasion, the administrative machinery of government extended only slowly into northern England. Northumberland's first recorded Sheriff was Gilebert from 1076 until 1080 and a 12th-century record records Durham regarded as within the shire. However the bishops disputed the authority of the sheriff of Northumberland and his officials, despite the second sheriff for example being the reputed slayer of Malcolm Canmore, King of Scots. The crown regarded Durham as falling within Northumberland until the late thirteenth century.

 

Following the Battle of Hastings, William the Conqueror appointed Copsig as Earl of Northumbria, thereby bringing what would become County Durham under Copsig's control. Copsig was, just a few weeks later, killed in Newburn. Having already being previously offended by the appointment of a non-Northumbrian as Bishop of Durham in 1042, the people of the region became increasingly rebellious. In response, in January 1069, William despatched a large Norman army, under the command of Robert de Comines, to Durham City. The army, believed to consist of 700 cavalry (about one-third of the number of Norman knights who had participated in the Battle of Hastings), entered the city, whereupon they were attacked, and defeated, by a Northumbrian assault force. The Northumbrians wiped out the entire Norman army, including Comines, all except for one survivor, who was allowed to take the news of this defeat back.

 

Following the Norman slaughter at the hands of the Northumbrians, resistance to Norman rule spread throughout Northern England, including a similar uprising in York. William The Conqueror subsequently (and successfully) attempted to halt the northern rebellions by unleashing the notorious Harrying of the North (1069–1070). Because William's main focus during the harrying was on Yorkshire, County Durham was largely spared the Harrying.

 

Anglo-Norman Durham refers to the Anglo-Norman period, during which Durham Cathedral was built.

 

Matters regarding the bishopric of Durham came to a head in 1293 when the bishop and his steward failed to attend proceedings of quo warranto held by the justices of Northumberland. The bishop's case went before parliament, where he stated that Durham lay outside the bounds of any English shire and that "from time immemorial it had been widely known that the sheriff of Northumberland was not sheriff of Durham nor entered within that liberty as sheriff. . . nor made there proclamations or attachments". The arguments appear to have prevailed, as by the fourteenth century Durham was accepted as a liberty which received royal mandates direct. In effect it was a private shire, with the bishop appointing his own sheriff. The area eventually became known as the "County Palatine of Durham".

 

Sadberge was a liberty, sometimes referred to as a county, within Northumberland. In 1189 it was purchased for the see but continued with a separate sheriff, coroner and court of pleas. In the 14th century Sadberge was included in Stockton ward and was itself divided into two wards. The division into the four wards of Chester-le-Street, Darlington, Easington and Stockton existed in the 13th century, each ward having its own coroner and a three-weekly court corresponding to the hundred court. The diocese was divided into the archdeaconries of Durham and Northumberland. The former is mentioned in 1072, and in 1291 included the deaneries of Chester-le-Street, Auckland, Lanchester and Darlington.

 

The term palatinus is applied to the bishop in 1293, and from the 13th century onwards the bishops frequently claimed the same rights in their lands as the king enjoyed in his kingdom.

 

The historic boundaries of County Durham included a main body covering the catchment of the Pennines in the west, the River Tees in the south, the North Sea in the east and the Rivers Tyne and Derwent in the north. The county palatinate also had a number of liberties: the Bedlingtonshire, Islandshire and Norhamshire exclaves within Northumberland, and the Craikshire exclave within the North Riding of Yorkshire. In 1831 the county covered an area of 679,530 acres (2,750.0 km2) and had a population of 253,910. These exclaves were included as part of the county for parliamentary electoral purposes until 1832, and for judicial and local-government purposes until the coming into force of the Counties (Detached Parts) Act 1844, which merged most remaining exclaves with their surrounding county. The boundaries of the county proper remained in use for administrative and ceremonial purposes until the Local Government Act 1972.

 

Boldon Book (1183 or 1184) is a polyptichum for the Bishopric of Durham.

 

Until the 15th century, the most important administrative officer in the Palatinate was the steward. Other officers included the sheriff, the coroners, the Chamberlain and the chancellor. The palatine exchequer originated in the 12th century. The palatine assembly represented the whole county, and dealt chiefly with fiscal questions. The bishop's council, consisting of the clergy, the sheriff and the barons, regulated judicial affairs, and later produced the Chancery and the courts of Admiralty and Marshalsea.

 

The prior of Durham ranked first among the bishop's barons. He had his own court, and almost exclusive jurisdiction over his men. A UNESCO site describes the role of the Prince-Bishops in Durham, the "buffer state between England and Scotland":

 

From 1075, the Bishop of Durham became a Prince-Bishop, with the right to raise an army, mint his own coins, and levy taxes. As long as he remained loyal to the king of England, he could govern as a virtually autonomous ruler, reaping the revenue from his territory, but also remaining mindful of his role of protecting England’s northern frontier.

 

A report states that the Bishops also had the authority to appoint judges and barons and to offer pardons.

 

There were ten palatinate barons in the 12th century, most importantly the Hyltons of Hylton Castle, the Bulmers of Brancepeth, the Conyers of Sockburne, the Hansards of Evenwood, and the Lumleys of Lumley Castle. The Nevilles owned large estates in the county. John Neville, 3rd Baron Neville de Raby rebuilt Raby Castle, their principal seat, in 1377.

 

Edward I's quo warranto proceedings of 1293 showed twelve lords enjoying more or less extensive franchises under the bishop. The repeated efforts of the Crown to check the powers of the palatinate bishops culminated in 1536 in the Act of Resumption, which deprived the bishop of the power to pardon offences against the law or to appoint judicial officers. Moreover, indictments and legal processes were in future to run in the name of the king, and offences to be described as against the peace of the king, rather than that of the bishop. In 1596 restrictions were imposed on the powers of the chancery, and in 1646 the palatinate was formally abolished. It was revived, however, after the Restoration, and continued with much the same power until 5 July 1836, when the Durham (County Palatine) Act 1836 provided that the palatine jurisdiction should in future be vested in the Crown.

 

During the 15th-century Wars of the Roses, Henry VI passed through Durham. On the outbreak of the Great Rebellion in 1642 Durham inclined to support the cause of Parliament, and in 1640 the high sheriff of the palatinate guaranteed to supply the Scottish army with provisions during their stay in the county. In 1642 the Earl of Newcastle formed the western counties into an association for the King's service, but in 1644 the palatinate was again overrun by a Scottish army, and after the Battle of Marston Moor (2 July 1644) fell entirely into the hands of Parliament.

 

In 1614, a Bill was introduced in Parliament for securing representation to the county and city of Durham and the borough of Barnard Castle. The bishop strongly opposed the proposal as an infringement of his palatinate rights, and the county was first summoned to return members to Parliament in 1654. After the Restoration of 1660 the county and city returned two members each. In the wake of the Reform Act of 1832 the county returned two members for two divisions, and the boroughs of Gateshead, South Shields and Sunderland acquired representation. The bishops lost their secular powers in 1836. The boroughs of Darlington, Stockton and Hartlepool returned one member each from 1868 until the Redistribution of Seats Act 1885.

 

The Municipal Corporations Act 1835 reformed the municipal boroughs of Durham, Stockton on Tees and Sunderland. In 1875, Jarrow was incorporated as a municipal borough, as was West Hartlepool in 1887. At a county level, the Local Government Act 1888 reorganised local government throughout England and Wales. Most of the county came under control of the newly formed Durham County Council in an area known as an administrative county. Not included were the county boroughs of Gateshead, South Shields and Sunderland. However, for purposes other than local government, the administrative county of Durham and the county boroughs continued to form a single county to which the Crown appointed a Lord Lieutenant of Durham.

 

Over its existence, the administrative county lost territory, both to the existing county boroughs, and because two municipal boroughs became county boroughs: West Hartlepool in 1902 and Darlington in 1915. The county boundary with the North Riding of Yorkshire was adjusted in 1967: that part of the town of Barnard Castle historically in Yorkshire was added to County Durham, while the administrative county ceded the portion of the Borough of Stockton-on-Tees in Durham to the North Riding. In 1968, following the recommendation of the Local Government Commission, Billingham was transferred to the County Borough of Teesside, in the North Riding. In 1971, the population of the county—including all associated county boroughs (an area of 2,570 km2 (990 sq mi))—was 1,409,633, with a population outside the county boroughs of 814,396.

 

In 1974, the Local Government Act 1972 abolished the administrative county and the county boroughs, reconstituting County Durham as a non-metropolitan county. The reconstituted County Durham lost territory to the north-east (around Gateshead, South Shields and Sunderland) to Tyne and Wear and to the south-east (around Hartlepool) to Cleveland. At the same time it gained the former area of Startforth Rural District from the North Riding of Yorkshire. The area of the Lord Lieutenancy of Durham was also adjusted by the Act to coincide with the non-metropolitan county (which occupied 3,019 km2 (1,166 sq mi) in 1981).

 

In 1996, as part of 1990s UK local government reform by Lieutenancies Act 1997, Cleveland was abolished. Its districts were reconstituted as unitary authorities. Hartlepool and Stockton-on-Tees (north Tees) were returned to the county for the purposes of Lord Lieutenancy. Darlington also became a third unitary authority of the county. The Royal Mail abandoned the use of postal counties altogether, permitted but not mandatory being at a writer wishes.

 

As part of the 2009 structural changes to local government in England initiated by the Department for Communities and Local Government, the seven district councils within the County Council area were abolished. The County Council assumed their functions and became the fourth unitary authority. Changes came into effect on 1 April 2009.

 

On 15 April 2014, North East Combined Authority was established under the Local Democracy, Economic Development and Construction Act 2009 with powers over economic development and regeneration. In November 2018, Newcastle City Council, North Tyneside Borough Council, and Northumberland County Council left the authority. These later formed the North of Tyne Combined Authority.

 

In May 2021, four parish councils of the villages of Elwick, Hart, Dalton Piercy and Greatham all issued individual votes of no confidence in Hartlepool Borough Council, and expressed their desire to join the County Durham district.

 

In October 2021, County Durham was shortlisted for the UK City of Culture 2025. In May 2022, it lost to Bradford.

 

Eighteenth century Durham saw the appearance of dissent in the county and the Durham Ox. The county did not assist the Jacobite Rebellion of 1715. The Statue of Neptune in the City of Durham was erected in 1729.

 

A number of disasters happened in Nineteenth century Durham. The Felling mine disasters happened in 1812, 1813, 1821 and 1847. The Philadelphia train accident happened in 1815. In 1854, there was a great fire in Gateshead. One of the West Stanley Pit disasters happened in 1882. The Victoria Hall disaster happened in 1883.

 

One of the West Stanley Pit disasters happened in 1909. The Darlington rail crash happened in 1928. The Battle of Stockton happened in 1933. The Browney rail crash happened in 1946.

 

The First Treaty of Durham was made at Durham in 1136. The Second Treaty of Durham was made at Durham in 1139.

 

The county regiment was the Durham Light Infantry, which replaced, in particular, the 68th (Durham) Regiment of Foot (Light Infantry) and the Militia and Volunteers of County Durham.

 

RAF Greatham, RAF Middleton St George and RAF Usworth were located in County Durham.

 

David I, the King of Scotland, invaded the county in 1136, and ravaged much of the county 1138. In 17 October 1346, the Battle of Neville's Cross was fought at Neville's Cross, near the city of Durham. On 16 December 1914, during the First World War, there was a raid on Hartlepool by the Imperial German Navy.

 

Chroniclers connected with Durham include the Bede, Symeon of Durham, Geoffrey of Coldingham and Robert de Graystanes.

 

County Durham has long been associated with coal mining, from medieval times up to the late 20th century. The Durham Coalfield covered a large area of the county, from Bishop Auckland, to Consett, to the River Tyne and below the North Sea, thereby providing a significant expanse of territory from which this rich mineral resource could be extracted.

 

King Stephen possessed a mine in Durham, which he granted to Bishop Pudsey, and in the same century colliers are mentioned at Coundon, Bishopwearmouth and Sedgefield. Cockfield Fell was one of the earliest Landsale collieries in Durham. Edward III issued an order allowing coal dug at Newcastle to be taken across the Tyne, and Richard II granted to the inhabitants of Durham licence to export the produce of the mines, without paying dues to the corporation of Newcastle. The majority was transported from the Port of Sunderland complex, which was constructed in the 1850s.

 

Among other early industries, lead-mining was carried on in the western part of the county, and mustard was extensively cultivated. Gateshead had a considerable tanning trade and shipbuilding was undertaken at Jarrow, and at Sunderland, which became the largest shipbuilding town in the world – constructing a third of Britain's tonnage.[citation needed]

 

The county's modern-era economic history was facilitated significantly by the growth of the mining industry during the nineteenth century. At the industry's height, in the early 20th century, over 170,000 coal miners were employed, and they mined 58,700,000 tons of coal in 1913 alone. As a result, a large number of colliery villages were built throughout the county as the industrial revolution gathered pace.

 

The railway industry was also a major employer during the industrial revolution, with railways being built throughout the county, such as The Tanfield Railway, The Clarence Railway and The Stockton and Darlington Railway. The growth of this industry occurred alongside the coal industry, as the railways provided a fast, efficient means to move coal from the mines to the ports and provided the fuel for the locomotives. The great railway pioneers Timothy Hackworth, Edward Pease, George Stephenson and Robert Stephenson were all actively involved with developing the railways in tandem with County Durham's coal mining industry. Shildon and Darlington became thriving 'railway towns' and experienced significant growths in population and prosperity; before the railways, just over 100 people lived in Shildon but, by the 1890s, the town was home to around 8,000 people, with Shildon Shops employing almost 3000 people at its height.

 

However, by the 1930s, the coal mining industry began to diminish and, by the mid-twentieth century, the pits were closing at an increasing rate. In 1951, the Durham County Development Plan highlighted a number of colliery villages, such as Blackhouse, as 'Category D' settlements, in which future development would be prohibited, property would be acquired and demolished, and the population moved to new housing, such as that being built in Newton Aycliffe. Likewise, the railway industry also began to decline, and was significantly brought to a fraction of its former self by the Beeching cuts in the 1960s. Darlington Works closed in 1966 and Shildon Shops followed suit in 1984. The county's last deep mines, at Easington, Vane Tempest, Wearmouth and Westoe, closed in 1993.

 

Postal Rates from 1801 were charged depending on the distance from London. Durham was allocated the code 263 the approximate mileage from London. From about 1811, a datestamp appeared on letters showing the date the letter was posted. In 1844 a new system was introduced and Durham was allocated the code 267. This system was replaced in 1840 when the first postage stamps were introduced.

 

According to the Encyclopædia Britannica Eleventh Edition (1911): "To the Anglo-Saxon period are to be referred portions of the churches of Monk Wearmouth (Sunderland), Jarrow, Escomb near Bishop Auckland, and numerous sculptured crosses, two of which are in situ at Aycliffe. . . . The Decorated and Perpendicular periods are very scantily represented, on account, as is supposed, of the incessant wars between England and Scotland in the 14th and 15th centuries. The principal monastic remains, besides those surrounding Durham cathedral,

The single GP9 on the wayfreight at Caledonia has taken lunch during the middle of the workload. It was handy to have the Conductor putting things together in the nearby caboose.

The junction of the Hagersville and Dunnville Subdivision's can be seen east of the highway 6 crossing.

J. Bryce Lee photo/ JB Ross collection

unedited-Not part of my personal collection

  

From Wikipedia, the free encyclopedia

 

The Dassault Mirage IV was a French supersonic strategic bomber and deep-reconnaissance aircraft. Developed by Dassault Aviation, the aircraft entered service with the French Air Force in October 1964. For many years it was a vital part of the nuclear triad of the Force de Frappe, France's nuclear deterrent striking force. The Mirage IV was retired from the nuclear strike role in 1996, and the type was entirely retired from operational service in 2005.

 

During the 1960s, there were plans of export sales for the Mirage IV; in one proposal, Dassault would have entered a partnership with the British Aircraft Corporation to jointly produce a Mirage IV variant for the Royal Air Force and potentially for other export customers, but this project did not come to fruition. The Mirage IV was ultimately not adopted by any other operators.

  

Development

 

Origins

 

During the 1950s, France embarked on an extensive military program to produce nuclear weapons; however, it was acknowledged that existing French aircraft were unsuitable for the task of delivering the weapons. Thus, the development of a supersonic bomber designed to carry out the delivery mission started in 1956 as a part of the wider development of France's independent nuclear deterrent. In May 1956, the Guy Mollet government drew up a specification for an aerially-refuelable supersonic bomber capable of carrying a 3-metric-ton, 5.2-metre-long nuclear bomb 2,000 km (without aerial refuelling). According to aviation authors Bill Gunston and Peter Gilchrist, the specification's inclusion of supersonic speed was "surprising" to many at the time.

 

The final specifications, jointly defined by government authorities and Dassault staff, were approved on 20 March 1957. Sud Aviation and Nord Aviation both submitted competing proposals, both based on existing aircraft; Sud Aviation proposed the Super Vautour, a stretched Sud Aviation Vautour with 47 kilonewtons (10,500 lbf) thrust Atar engines and a combat radius of 2,700 kilometres (1,700 mi) at Mach 0.9. Dassault's proposal for what became the Mirage IV was chosen on the basis of lower cost and anticipated simpler development, being based upon a proposed early 1956 twin-engined night-fighter derived from the Dassault Mirage III fighter and the unbuilt Mirage II interceptor. In April 1957, Dassault were informed that they had won the design competition.

 

Dassault's resulting prototype, dubbed Mirage IV 01, looked a lot like the Mirage IIIA, even though it had double the wing surface, two engines instead of one, and twice the unladen weight. The Mirage IV also carried three times more internal fuel than the Mirage III. The aircraft's aerodynamic features were very similar to the III's but required an entirely new structure and layout. This prototype was 20 metres (67 ft) long, had a 11 metres (37 ft) wingspan, 62 square metres (670 sq ft) of wing area, and weighed approximately 25,000 kilograms (55,000 lb). It was considerably more advanced than the Mirage III, incorporating new features such as machined and chem-milled planks, tapered sheets, a small amount of titanium, and integral fuel tanks in many locations including the leading portion of the tailfin.

 

The 01 was an experimental prototype built to explore and solve the problems stemming from prolonged supersonic flight. The sizable technological and operational uncertainties (no plane had yet been found able to cruise at over Mach 1.8 for long periods of time) were only one part of the problem. The weapon-related issues were the other. It took 18 months to build the 01 in Dassault's Saint-Cloud plant near Paris. In late 1958, the aircraft was transferred to the Melun-Villaroche flight testing area for finishing touches and ground tests. On 17 June 1959, French General Roland Glavany, on a five-year leave from the French Air Force since 1954, took the 01 for its maiden flight.

 

For its third flight, on 20 June 1959, the 01 was authorised to fly over the Paris Air Show at Le Bourget airport in front of France's President Charles de Gaulle.[citation needed] On 19 September 1960, René Bigand (replacing Glavany as test pilot) increased the world record for speed on a 1000-kilometre closed circuit to 1,822 km/h (1,132 mph) around Paris and the Melun base. Flight 138, on 23 September, corroborated the initial performance and pushed the record on a 500 km closed circuit to an average of 1,972 km/h (1,225 mph), flying between Mach 2.08 and Mach 2.14. The Mirage IV 01 prototype underwent minor modifications during testing in the autumn of 1959, most noticeably, the tail was enlarged (slight reduction in height, large increase in chord).

 

Production

In order to increase range, studies were made of a significantly larger Mirage IVB design, powered by two Snecma license-built Pratt & Whitney J75 engines and having a wing area of 120 m² (1,290 sq ft) compared to 70 m² (750 sq ft) of the prototype IV, as well as a speed of Mach 2.4 and a gross weight of 64,000 kilograms (140,000 lb). The Mirage IVB proposal had been instigated as a response to interest by de Gaulle in ensuring that two-way (including the aircraft's return to France) strike missions could be flown. However, development of the aircraft was ultimately cancelled in July 1959 due to the greater cost involved, a decision having been taken to rely upon aerial refueling instead also being a factor.

 

With the Mirage IVB considered to be too expensive, the medium-sized Mirage IVA, slightly larger than the first prototype, was chosen for three more prototypes to be produced. This aircraft had a wing area of 77.9 square metres (839 sq ft) and weighed about 32,000 kilograms (70,000 lb)[12] On 4 April 1960, a formal order for 50 production Mirage IVA aircraft was issued. The three prototype aircraft were built between 1961 and 1963, with first flights on 12 October 1961, 1 June 1962, and 23 January 1963. By 1962, the second prototype had conducted simulated nuclear bombing runs in the trials range at Colomb-Bechar in southern Algeria. The third prototype was equipped with the navigation/bombing systems and flight refuelling probe. The fourth prototype Mirage IVA-04 was essentially representative of the production aircraft that would follow.

 

For production, various portions of the aircraft were subcontracted to Sud Aviation (wings and rear fuselage) and Breguet Aviation (tailfin), which was still a separate company from Dassault until 1967; Dassault manufactured the front fuselage and flight-control system internally. Manufacture of both the prototypes and subsequent production aircraft was often hindered by an explicit requirement that there would be no reliance upon foreign suppliers to maintain France's nuclear capabilities; due to this, the Mirage IV initially lacked an inertial navigation system as French industry could not yet produce this device.

 

On 7 December 1963, the first production Mirage IVA performed its maiden flight. A series of 62 aircraft was built, and they entered service between 1964 and 1968. Although Dassault had designed the Mirage IV for the low-level flight role right from the start, the final batch of 12 aircraft ordered in November 1964 differed from the earlier aircraft in several areas, including the flight controls, avionics, and structural details, for the purpose of providing improved low-level performance. It had been planned for this batch to be powered by the newer Pratt & Whitney/SNECMA TF106 turbofan engine. The improvements featured upon the last 12 Mirage IVs were later retroactively applied to the whole fleet.

 

In December 1963 Dassault proposed a Mirage IV-106 variant with 2 Snecma TF106 (license-built Pratt and Whitney) engines, an enlarged 105,000 gross-weight fuselage, terrain-avoidance radar, and armed with a proposed French version of the American Douglas GAM-87 Skybolt air-launched ballistic missile. This version would have been very costly, and ultimately was not ordered.

 

Proposed export variants

In 1963, the Australian government sought a replacement for the Royal Australian Air Force fleet of English Electric Canberra bombers, largely in response to the Indonesian Air Force's purchase of missile-armed Tupolev Tu-16 bombers. Dassault proposed a version of the Mirage IVA with Rolls-Royce Avon engines. Australian Air Marshall Frederick Scherger seriously considered purchase of the IVA in 1961 because it was considered to be proven hardware already in service (in contrast to the BAC TSR-2 which was still in development), before settling on the General Dynamics F-111C. The IVA was one of five aircraft types that were short listed for the role, but the F-111C was eventually selected.

 

In April 1965, the British Government cancelled the TSR-2 reconnaissance-strike aircraft. In response, Dassault and British Aircraft Corporation (BAC) proposed a modified Mirage IV variant as a replacement in July 1965. The aircraft, known as the Mirage IV* or Mirage IVS (S for Spey) would be re-engined with more powerful Rolls-Royce Spey turbofan engines with a total of 185 kilonewtons (41,700 lbf), larger (fuselage depth increased by 7.6 centimetres (3 in), had an approximately 0.61 metres (2 ft) forward fuselage extension, and was to weigh 36,000 kilograms (80,000 lb)), and use avionics planned for the TSR-2, although BAC preferred the French Antilope radar. Although designed by Dassault, the production was to be carried out jointly between Dassault and its subcontractors (wing, mid-fuselage, and tail) and BAC (front and rear fuselage). The final assembly location was not determined before this proposal was rejected. The Mirage IV* was to carry a bombload of up to 9,100 kilograms (20,000 lb). While the IV* was claimed to meet most of the Royal Air Force (RAF)'s requirements, and to be £1 million cheaper than the American-made F-111K was preferred (only to be cancelled in turn) and the Spey-engined Mirage abandoned.

 

The Mirage IV* met nearly every RAF requirement except for field length, and some claim it exceeded the F-111 slightly in speed and had at least equal range. The estimated cost was 2.321 million pounds per aircraft (for 50) or 2.067 million (for 110), less than the price of the F-111K. BAC claimed that the British government evaluation into the Mirage IV* was "relatively superficial". However, some British government officials, including Parliament members Julian Risdale and Roy Jenkins, questioned the Mirage IV*'s capacity to operate from unprepared airstrips or to operate at low level, or claimed that the F-111 was a superior aircraft "in a class of its own". However, Bill Gunston notes that low-level Mirage IV missions had been planned since 1963 and Mirage IVs operated regularly at low level since 1965, and argues that the ability of a strategic bomber to operate from unprepared airstrips is historically unimportant. RAF pilots who test-flew the Mirage IV were "favourably impressed" with its low altitude performance.

 

BAC and Dassault had also hoped to sell the Mirage IV* to France and to export the Mirage IV* to various nations, such as India, possibly Israel, and others; the lack of a British sale put an end to such possibilities. Some aviation journalists claim that the rejection of the Mirage IV* may have dampened French interest in joint Anglo-French cooperation.

 

Design

 

The Mirage IV shares design features and a visual resemblance to the Mirage III fighter, featuring a tailless delta wing and a single square-topped vertical fin. However, the wing is significantly thinner to allow better high-speed performance and has a thickness/chord ratio of only 3.8% at the root and 3.2% at the tip; this wing was the thinnest built in Europe at that time and one of the thinnest in the world. While being significantly smaller than an expensive medium bomber proposal for the role, the Mirage IV was roughly three times the weight of the preceding Mirage III.

 

The Mirage IV is powered by two Snecma Atar turbojets, fed by two air intakes on either side of the fuselage that had intake half-cone shock diffusers, known as souris ("mice"), which were moved forward as speed increased to trim the inlet for the shock wave angle. It can reach high supersonic speeds: the aircraft is redlined at Mach 2.2 at altitude because of airframe temperature restrictions, although it is capable of higher speeds. While broadly similar to the model used on the Mirage III, the Atar engine had a greater airflow and an elevated overspeed limit from 8,400 rpm to 8,700 rpm for greater thrust during high altitude supersonic flight. While the first Mirage IV prototype was fitted with double-eyelid engine nozzles, production aircraft featured a complicated variable geometry nozzle that automatically varied in response to the descent rate and airspeed.

 

The aircraft has 14,000 litres (3,700 gal (US)) of internal fuel, and its engines are quite thirsty, especially when the afterburner is active. Fuel was contained within integral tanks within the wings, as well as a double-skinned section of the fuselage between and outboard of the inlet ducts, underneath the ducts and engines, and forward of the main spar of the tail fin; this provided a total internal capacity of 6,400 kilograms (14,000 lb). A refueling probe is built into the nose; aerial refuelling was often necessary in operations as the Mirage IV only had the fuel capacity, even with external drop tanks, to reach the Soviet Union's borders, thus refuelling was required to allow for a 'round trip'. In the event of nuclear war between the major powers, it was thought that there would be little point in having the fuel to return as the host air bases would have been destroyed; instead, surviving Mirage IVs would have diverted to land at bases in nearby neutral countries following the delivery of their ordnance.

 

The two-man crew, pilot and navigator, were seated in tandem cockpits, each housed under separate clamshell canopies. A bombing/navigation radar is housed within an oblique-facing radome underneath the fuselage between the intakes and aft of the cockpit; much of the Mirage IV's onboard avionics systems, such as the radar communications, navigational instrumentation, and bombing equipment, were produced by Thomson-CSF. Other avionics elements were provided by Dassault itself and SFENA; one of the only major subsystems not of French origin onboard was the Marconi-built AD.2300 doppler radar. Free-falling munitions could also be aimed using a ventral blister-mounted periscope from the navigator's position.

 

The Mirage IV has two pylons under each wing, with the inboard pylons being normally used for large drop tanks of 2,500-litre (660 gal (US)) capacity. The outer pylons typically carried ECM and chaff/flare dispenser pods to supplement the internal jamming and countermeasures systems. On later aircraft, this equipment typically included a Barax NG jammer pod under the port wing and a Boz expendables dispenser under the starboard wing. No cannon armament was ever fitted aboard the type. The early Mirage IVA had a fuselage recess under the engines which could hold a single AN-11 or AN-22 nuclear weapon of 60 kt yield. The Mirage IV can carry 12 solid-fuel rockets diagonally down below the wing flaps, for rocket-assisted take off (RATO).

 

From 1972 onward, 12 aircraft were also equipped to carry the CT52 reconnaissance pod in the bomb recess. These aircraft were designated Mirage IVR for reconnaissance. The CT52 was available in either BA (Basse Altitude, low-level) or HA (Haute Altitude, high-altitude) versions with three or four long-range cameras; a third configuration used an infrared line scanner. The CT52 had no digital systems, relying on older wet-film cameras. The first operational use of the system took place during missions in Chad in September 1974.

 

During the 1980s, a total of 18 Mirage IVs were retrofitted with a centreline pylon and associated equipment to carry and launch the nuclear ASMP stand-off missile. The Mirage IVA could theoretically carry up to six large conventional bombs at the cost of drop tanks and ECM pods, such armament was rarely fitted in practice.

  

Operational history

 

Introduction and early operations

 

"We don't have fighter aircraft, we have fear-inducing aircraft"

French President Charles de Gaulle, speaking of the Mirage IV in 1963.

In February 1964 deliveries of the Mirage IV to the French Air Force started, with the first French Mirage IV squadron being declared operational on 1 October that year. The Mirage IV bomber force soon consisted of nine squadrons of four aircraft (2 pairs – one aircraft carrying the nuclear bomb, one a buddy-refuelling tanker) each. When fully built up, the force consisted of three wings. These wings were each divided into three bomber squadrons, each equipped with a total of four Mirage IVs, with each deployed at a different base to minimise the potential for an enemy strike to knock out the entire bomber force.

 

After establishment of its own deterrent force, the Force de Dissuassion, more commonly known as the Force de frappe, France withdrew from the military command structure of NATO in 1966. De Gaulle viewed the operational establishment of the Mirage IV fleet, a critical component of the independent Force de frappe, as highly influential to his decision to withdraw France from NATO, and that an independent French nuclear deterrent was necessary to ensure independence as a nation. From 1964 to 1971, the Mirage IV was France's sole means of delivering nuclear ordnance. At this point they were each armed with a single 60 kiloton nuclear bomb.

 

Alert status consisted of an active inventory of 36 Mirage IVs. At any one time 12 aircraft would be in the air, with a further 12 on the ground kept at four minutes' readiness and the final 12 at 45 minutes' readiness, each equipped with an onboard functional nuclear weapon. These 36 active aircraft would be rotated with 26 reserve aircraft; the latter were kept in an airworthy condition or were otherwise subject to maintenance activities. Within the first decade of the type entering service, in excess of 200,000 hours were flown and 40,000 aerial refuelling operations were performed by the Mirage IV fleet alone; at one point, Mirage IV operations were consuming up to 44 per cent of the French Air Force's total spare parts budget.

 

The primary objectives of the Mirage IVA force were major Soviet cities and bases. With aerial refueling], the plane was able to attack Moscow, Murmansk or various Ukrainian cities when sortieing from French bases. A justification of the Mirage IV given by Armée de l'air Brigadier General Pierre Marie Gallois, an architect of the French nuclear deterrent, was that: "France is not a prize worthy of ten Russian cities".

 

In order to refuel the Mirage IVA fleet, France purchased 14 (12 plus 2 spares) U.S. Boeing C-135F tankers. Mirage IVAs also often operated in pairs, with one aircraft carrying a weapon and the other carrying fuel tanks and a buddy refueling pack, allowing it to refuel its partner en route to the target. Even so, some sources state that some of the mission profiles envisioned were actually one-way, with the crew having no chance of returning after bombing a Soviet city. The inability for the Mirage IV to return after missions had been a point of controversy during the aircraft's early development.

 

Both flight and grounds crews received training principally by Strategic Air Forces Command 328, stationed at Bordeaux. Several Nord Noratlas were specially modified, having received the Mirage IV's radar, control consoles, and additional electrical generators, for the purpose of training navigators; these were later replaced by a pair of customised Dassault Falcon 20 outfitted with much of the Mirage IVP's avionics.

 

Transition and upgrades

Initially, the basic attack flight profile was "high-high-high" at a speed of Mach 1.85, engaging targets up to a maximum radius of 3,500 km (2,175 mi). In the late 1960s, when the threat of surface-to-air missile defences made high-altitude flight too hazardous, the Mirage IVA was modified for low-altitude penetration. Flying low, the maximum attack speed was reduced to 1,100 km/h (680 mph) and the combat radius was also decreased. By 1963, the majority of missions involving the Mirage IV were being planned as low-level flights. By 1964, Mirage IVAs were conducting training penetration runs at an altitude of 200 ft, without the assistance of terrain-following radar, which subjected pilots to considerable workload and those on board to high levels of turbulence.

 

To improve survivability, the French Air Force began dispersing Mirage IVs to pre-prepared rough strips during the 1960s; while the use of hardened bunkers had been assessed, it was found to be financially impractical. By the 1970s, it had become clear that vulnerability of the Mirage IV to air defences, even while flying at low altitudes, had made the delivery of gravity bombs such as the AN-11 or AN-22 impractical. Thus, it was decided to pass a greater share of the deterrent role onto land-based missiless and submarine-launched ballistic missiles alternatives; as a result, a single wing of Mirage IVs was stood down in 1976, partially due to fleet-wide attrition losses.

 

In 1973, it was reported that a force of 40 Mirage IVs would continue to perform as a part of France's nuclear deterrent until the 1980s, and that steady improvements were to be undertaken. In 1975, all Mirage IVs were progressively painted in a new green/grey camouflage scheme. In 1979, in response to the decreasing effectiveness of free-fall bombs used by both its strategic and tactical nuclear forces, development of the ASMP stand-off missile was initiated; the ASMP would possess a range of up to 400 km (250 mi) and was alternative armed with either a single 150 or 300 kiloton nuclear warhead. Various test launches of dummy and later live ASMPs were performed using the Mirage IV as the launch platform between 1981 and 1983.

 

In July 1984, a contract was formally issued for the upgrade of a total of 18 Mirage IVAs to carry the ASMP missile in the place of traditional bombs; these aircraft were redesignated Mirage IVP (Penetration). The conversion of Mirage IVAs to IVPs involved a large number of modifications and re-workings of the aircraft. A deep centerline pylon was added, which could accommodate either a single ASMP missile or a CT52 reconnaissance pod. The main radar and electronics suite were removed and replaced by newer counterparts; other modified systems included the navigation system, flight control system, and various elements of the cockpit. On 12 October 1982, the first modernised Mirage IVP performed its first flight; it re-entered active service on 1 May 1986.

 

In August 1985, a French proposal that would have seen Mirage IVPs stationed at air bases inside neighbouring West Germany was made public; this deployment would have marked a significant philosophical departure from traditional French nuclear defence policy. Aviation authors Bill Gunston and Peter Gilchrist allege that French officials had historically discounted the option of recovering Mirage IVs in friendly territory as unduly optimistic, as those nations might become unfriendly or hostile in the aftermath of a French nuclear attack.

 

Phase-Out

 

On 31 July 1996, the Mirage IVP was formally retired in its bomber capacity, the nuclear mission having been transferred from the Mirage IV to the newer Dassault Mirage 2000N. EB 2/91 was disbanded and EB 1/91 was redesignated Escadron de Reconnaissance Stratégique (Strategic Reconnaissance Squadron),[citation needed] using five remaining Mirage IVPs based at Mont-de-Marsan; the remaining aircraft were stored at Chateaudun. In the reconnaissance role, the Mirage IVP has seen service over Bosnia, Iraq, Kosovo and Afghanistan.

 

ES 1/91 Gascogne's surviving Mirage IVPs were retired in 2005 and are conserved and stored at the Centre d'Instruction Forces Aériennes Stratégiques (CIFAS) at Bordeaux Mérignac. The retirement of all reconnaissance-configured Mirage IVPs in 2005 meant that the French Air Force's Mirage F1CRs were for some time the only aircraft capable of carrying out aerial reconnaissance missions. The long term replacement for the Mirage IVP was Mirage 2000N aircraft outfitted with a modern PRNG Pod de Reconnaissance Nouvelle Génération (New Generation Reconnaissance Pod), equipped with digital camera equipment.

 

The Mirage IV had been popular with its crews, who found it enjoyable to fly. In addition, it required surprisingly little maintenance considering its age and complexity.

   

The outset of World War II saw a progression of American aircraft carrier design leading to larger and more heavily armored battle carriers. CVB-41, the lead ship of the Midway class, was ordered on August 7, 1942. She was the first fleet carrier to have the distinction of being named after a WWII battle. The carrier battle of Midway Island in June 1942 turned the tide of World War II and proved conclusively the potential of naval aviation. CVB-41 was the third American ship and the second aircraft carrier to bear the name of Midway. The name of the first USS Midway, a fleet auxiliary, was changed to the USS Panay in April, 1943. The second ship bearing the name was a jeep carrier USS Midway, CVE-63, which was changed to the USS Saint Lo in September 1944.

 

The product of the Newport News Shipbuilding and Dry Dock Company, she was the lead ship of three 45,000-ton Midway class CVBs, followed by USS Franklin D. Roosevelt, CVB-42 and USS Coral Sea, CVB-43. Two additional ships were canceled. Midway's keel was laid on October 27, 1943. The Midway class hull arrangement was modeled on the canceled Montana class battleships and was a new, much larger design intended to correct certain problems in the Essex class design. They had armored flight decks, requiring a much larger hull and lower freeboard, to reduce top weight. They also carried a very heavy AA battery of 5/54 weapons. The armor requirement was originally meant to counter 8" cruiser gunfire, but by the time the ships were laid down the focus had shifted to defending against aircraft attack.

 

Launched on March 20, 1945, she was sponsored by Mrs. Bradford William Ripley, Jr. Commissioned on September 10, 1945, with Captain Joseph F. Bolger in command, Midway was the largest warship in the world for the first decade of her service. Every aspect of her construction included the most modern design innovations possible. Twelve Babcock and Wilcox boilers powered four Westinghouse geared turbines which developed 212,000 horsepower for a maximum speed of 33 knots. Midway was designed with two catapults, fourteen arresting cables, and six barriers. Her design aircraft compliment was 137. In their early years, the Midway class carriers were the only ships capable of operating nuclear strike aircraft.

 

Midway was first underway on October 12, 1945 and performed her first arrested landing of an F4U-4 Corsair. Her Caribbean shakedown cruise lived up to all expectations, the only negative being a pronounced proclivity to drench the flight deck and the bow 40mm quad mount with green water in moderately heavy seas. Seriously overweight, Midway tended to plunge through, rather than ride over, heavy seas. The result of wartime demands that had continually added more tonnage, Midway quickly earned a reputation as a "wet" ship with her forward flight deck, gun galleries and hangar spaces frequently awash. In her final years, crewmembers described this plunging as "Rock & Roll."

  

In late February 1946 Midway became flagship for Carrier Division 1, operating in the Atlantic where she commenced flight training exercises in earnest. A few months late she embarked on her first major operational assignment, which included Operation FROSTBITE, conducted from March 1 to 28, 1946. Operating in the Labrador Sea and Davis Strait, MIDWAY, three destroyers and a fleet oiler conducted a cold weather evaluation of aircraft, personnel and ships. Embarked onboard Midway was a Coast Guard helicopter and crew, which signified the first use of a helicopter for plane guard duty. Helicopter air-sea rescue techniques were refined and the infamous "poopy suit" was evaluated. Midway conducted flight and refueling operations during these tests despite heavy weather damage to elevator hangar doors and having two to four inches of snow on the flight deck at various times.

 

Early in 1947, operating off the East Coast with her recently redesignated battle group, CVBG-1, Midway operated F4U-4B Corsairs and SB2-C-5 Helldivers. She conducted three training cruises in the Caribbean before sailing from her homeport at Norfolk, Virginia, on another experimental mission. On that landmark cruise, she was accompanied by scientific observers as her crew fired a captured German V-2 rocket from the flight deck on September 6, 1947. The purpose of Operation SANDY was to see if a large rocket could be launched from the deck of an aircraft carrier with little to no modifications. The actual ship launch test was only conducted once. There were prior tests carried out at White Sands on a simulated aircraft carrier deck to see what effects the rocket would have if it were to explode on the deck. This test marked the first time such a weapon was fired from a ship at sea or a moving platform. It decisively demonstrated the potential of large rocket fire from surface ships.

 

On October 29, 1947, Midway departed on her first deployment to the Mediterranean. Her air wing group was CVBG-1, made up of two fighter squadrons, which flew F4U-B Corsairs and AD-1 Skyraiders. Port calls during this cruise included Gibraltar, Algeria (Bone), Malta (Marsaxlokk Harbor), Italy (Genoa, Naples, and Taranto), Sicily (Augusta), and France (Gulf D'Hyeres). On February 18, 1948, a Midway launch capsized off Hyeres, France, killing eight. The deployment concluded in Norfolk, Virginia in March of 1948. A return trip to the Mediterranean was made from January to March 1949. This time, two Marine fighter squadrons were aboard. This cruise was hallmarked when a P2V-3 Neptune launched from Midway off the coast of Norfolk, flew to the Panama Canal, then over Corpus Christi, Texas and on to San Diego, California. This 4,800 mile non-stop flight was completed in 25 hours and 40 minutes. This operation was part of the Navy's determination to develop a carrier-based nuclear strike capability. The Navy modified twelve Lockheed P2V Neptunes to carry the 9000-lb Mk VIII atomic bomb. All three Midway carriers participated in extensive tests that saw this 70,000-lb long-range patrol bomber clear the deck with JATO-assisted rolling takeoffs. Unable to be launched by the ship's hydraulic catapults because of the aircraft's weight, the P2V's wingspan barely cleared the ship's island during its takeoff run. A "make do" aircraft modification too heavy to land on the carriers, the P2Vs turned in impressive performances flying mock "A-bomb" runs. Soon replaced by the more suitable folding-wing AJ-1 Savage, the Navy nevertheless proved that its carriers had nuclear delivery capability.

 

Midway departed Norfolk in October 1949 once again bound for cold weather operations. She operated in the Arctic Circle, gaining membership in "The Royal Order of the Blue Nose," and returned to Norfolk on December 22, 1949.

 

Midway deployed to the Mediterranean for a third time in January 1950 with Air Group Four. Port calls included Istanbul, Cyprus, Malta, Cannes, Oran and Lisbon. She returned to Norfolk in May of that year. On June 26, a Naval airship piloted by Lt. John Fahey, landed and then took off from the Midway during a demonstration for the Chief of Naval Operations and the Commander in Chief, U.S. Atlantic Fleet who were aboard Midway. With less than two months to turn around, Midway redeployed in July, exchanging Air Group Four for Air Group Seven. She arrived in Gibraltar with an upgraded fighter capability consisting of F9F-2 Panthers and F8F-1B Bearcats. On October 17th LTJG H. Urban, a pilot from VC-4 became Midway's first Centurion. He made his 100th Midway trap (his 207th career carrier landing) while flying an AD-3N. On this cruise, Midway served as the flagship of COMCARDIV Six and returned to Norfolk in November.

 

The first two years of Midway class carrier operations revealed several shortcomings which were progressively addressed with refits and modifications to maintain the ships' first-line assault carrier status. Their flight decks were reinforced to accept the landing weight of the new 45,000-lb twin-engined, jet-augmented AJ-1 Savage. At this time the process of reducing wartime armament began when four of their eighteen five-inch/54 DP guns were removed. Also begun was the gradual replacement of 40mm Bofors with twenty new three-inch/50 fast-firing semi-automatic AA guns. The test of rigorous steaming soon revealed several other deficiencies which could not be ignored. Skippers complained that the Midway's bridge area was too cramped. This was corrected during construction by extending the island structure on the Coral Sea, and retrofitting enlarged areas to the Midway and Franklin D. Roosevelt during overhaul. These changes also afforded better placement of the gun directors. Later, the three ships would be fitted with "hurricane" bows that enclosed the forward flight deck and hull.

  

From November 1950 until April 1951, Midway was in the Norfolk Naval Shipyard for reinforcement of the flight deck to accommodate heavier aircraft. After conducting brief carrier qualifications off the Carolina coast, she steamed south for Guantanamo Bay, Cuba. After completing refresher training Midway returned to Norfolk in July.

 

In January 1952, Midway made her fifth Mediterranean cruise with Air Group Six embarked. During this cruise, Midway participated in Operation GRAND SLAM, a multi-national English, French, Italian and U.S. exercise. Upon completion of this exercise, she operated in the eastern Mediterranean before returning to Norfolk in May 1952. From 26 to 29 May 1952, the feasibility of the angled deck concept was demonstrated in tests conducted on a simulated angled deck aboard Midway by Naval Air Test Center pilots and Atlantic Fleet pilots in both jet and prop aircraft. In August 1952, Midway departed Norfolk for NATO exercises in the North Sea. This was a combined exercise with USS Franklin D. Roosevelt, USS Wasp, and USS Wisconsin. On October 1, upon her return to Norfolk, Midway was redesignated as attack carrier CVA-41.

 

Again with less than two months preparation, Midway departed on her sixth Mediterranean cruise in December of 1952. The basic composition of the air group remained unchanged. Participating in NATO Operation RENDEZVOUS from March 15 - 24, Midway was the flag ship of Carrier Division Four and made port calls at Gibraltar, France (Golfe Juan and Marseilles), Italy (Taranto, Naples, Genoa, and LaSpezia), Algeria (Algiers and Oran), Sicily (Augusta), Greece (Rhodes and Salonika), Golfe Juan, and Spain (Barcelona & Palma). Returning to Norfolk in May 1953, Midway entered a five-month regular overhaul.

 

In January 1954, Midway deployed to the Mediterranean for the seventh time. Just before entering port in Athens for a state visit, Midway collided with a replenishment ship, USS Great Sitkin, AE-17. Occurring in the Aegean Sea about 1700 on a Sunday, the ships were conducting side-by-side transfer of materials in rough seas. Swells were reported to be about 15 feet between the ships. Upon casting off the last securing lines, the Great Sitkin began a sharp starboard turn. This caused her port stern area to sideswipe the Midway's aft starboard side, just above the waterline, crushing one of the starboard weather deck 5" gun mounts. There was no fire and damage control made temporary repairs while underway. Also during this cruise, a major fire on the flight deck occurred when an F2H bounced over the barrier and went into the pack. Casualties were four pilots and approximately four crew. This cruise was extended an additional month due to their relief, USS Bennington having a catastrophic port catapult machinery explosion, which killed about 100 of the crew. The Bennington had to return to CONUS for repairs before finally departing for the Mediterranean. Midway returned to Norfolk in August of 1954.

   

In December 1954, with Air Group One aboard, Midway departed Norfolk on a world cruise, which culminated in her transfer to the Pacific Fleet. Joining the Seventh Fleet off Taiwan in February 1955, she became the flagship of COMCARDIV Three, operating off the Philippine Islands and Japan. Shortly after her arrival in the area, Midway participated in the evacuation of 24,000 military and civilian personnel of the Republic of China from the Tachen Islands, off the China coast. She remained in the area patrolling the Taiwan Straits and the South China Sea until June. For this operation, Midway was awarded the China Service Medal. Midway left Yokosuka, Japan and returned to NAS Alameda, California in July 1955. She entered Puget Sound Naval Shipyard, Washington and was decommissioned for the first time in October 1955.

 

While the gradual removal of armament helped to curtail the burden of excessive weight, the advent of the angled carrier deck not only added additional tons of displacement, but became a serious factor in stability. Built as axial, or straight-deck carriers, the problem of cycling and spotting aircraft for either launching or recovery operations remained a detriment to combat efficiency since only one function could be performed at a time. The angled flight deck, pioneered by the British, changed all that.

   

After being decommissioned, Midway underwent a modernization project to give her the capability to operate high performance jet aircraft. She was fitted with two steam catapults on the bow and a shorter steam catapult in the new angle deck. The purpose of the third catapult was to allow ready deck launches while keeping the landing area clear for recoveries in an "alert" situation. Additional improvements included the installation of a hurricane (enclosed) bow, moving elevator number three to the starboard deck edge aft of the island, enlarging the number one elevator to accommodate longer aircraft, new arresting gear, jet blast deflectors, and the largest aviation crane ever installed on an aircraft carrier. On recommissioning in September 1957, Midway's load displacement had grown from 55,000 to 62,000 tons.

 

Midway was soon underway in December heading south for shakedown and refresher training. In August 1958, she was underway on her first deployment as an angle deck carrier. With Midway's increased combat capabilities, CVG-2 was composed of two supersonic fighter squadrons and three attack squadrons. On 8 December 1958, the first firing of a Sparrow III air-to-air missile by a squadron deployed outside the U.S. was conducted by VF-64, based aboard Midway. During this cruise, she operated off Taiwan in support of the Quemoy-Matsu crisis as the flagship of COMCARDIV Five. She returned to Alameda in March of 1959.

 

In August 1959, after a one-month turn around period, Midway redeployed to the Far East. During this cruise, she recorded 8,000 landings, including her 80,000th arrested landing. On November 09, 1959, during a port visit to Subic Bay in the Philippines, a fire broke out in the pump room aboard the carrier. While the reason was never clear, official sources named arson. Her eleventh deployment ended with arrival at Alameda in March 1960.

 

Following a five-month overhaul, Midway underwent refresher training, operating from Long Beach, California. During this training, the McDonnell F4H-1 Phantom II and the North American A3J-1 Vigilante were aboard for their carrier qualifications prior to entering actual service. Upon completion of her refresher training, Midway was underway in February 1961. With Air Group Two aboard, she operated off the coast of Vietnam during the Laotian crisis, eventually returning to Alameda in September 1961.

   

In April 1962, Midway departed for another Far East tour. During this deployment, her aircraft tested the air defense systems of Japan, Korea, Okinawa, the Philippines, and Taiwan. The 100,000th arrested landing was made during this cruise which ended upon arrival at Alameda in October 1962.

 

After a regular overhaul extending until April 1963, Midway continued its role as a research and development platform. On 13 June 1963, Lt. Cmdr. Randall K. Billins and Lt. Cmdr. Robert S. Chew Jr., of Naval Air Test Center Patuxent River, piloting an F-4A Phantom II and an F-8D Crusader respectively, made the first fully automatic carrier landings with production equipment on board Midway off the California coast. The landings, made "hands off" with both flight controls and throttles operated automatically by signals from the ship, highlighted almost 16 years of research and development.

 

Midway made her fourteenth and sixth straight WESTPAC deployment in November 1963. Her most significant improvement was increased jet fighter capacity with the addition of Mach 2.2 F-4B Phantom IIs. She returned to Alameda in May 1964 to replace the number three elevator which had been destroyed and lost during extremely heavy seas. This incident happened while Midway was taking on supplies, using the elevator as the transfer point. A wave hit the elevator, lifting it and cocking it in the runners. The wave partially went over the elevator, nearly washing off the sailors who were moving supplies. A second wave hit the elevator, causing it to drop out the bottom of the runners, lifted it higher, and then dropped it, snapping the cables. The elevator fell behind the ship and eventually sunk.

   

On February 27, 1965, an aircraft from the Midway was inadvertently shot down by a USS Preble (DLG-15) missile when it over flew a missile range during southern California maneuvers for the SILVER LANCE exercise. The pilot was killed. March 1965 marked a milestone in Midway's life as she left Alameda for her first combat cruise. From mid-April, while operating as part of Task Force 77 in the Tonkin Gulf, Midway's aircraft flew 11,900 combat missions over Vietnam. On 17 June 1965, while escorting a strike on the barracks at Gen Phu, North Vietnam, Cmdr. L. C. Page and Lt. J. E. Batson, flying F-4B Phantoms of VF-21, deployed aboard Midway, intercepted four MiG-17s. Cmdr. Page shot down one, scoring the first U.S. victory over MiGs in Vietnam. In the same engagement, Lt. Batson shot down a second MiG with an AIM-7 Sparrow missile. An unconfirmed report shows that debris from the destroyed aircraft was ingested by that MiG's wingman, possibly giving Lt. Batson a double kill. On 20 June, four A-1H Skyraiders from VA-25 were on a mission to locate downed pilots. The Skyraiders were carrying survival canisters and rocket canisters on the wing racks. A support ship detected two enemy aircraft coming from the north and warned the Skyraiders. The Skyraiders immediately dropped all ordnance, including fuel tanks, and went down to treetop level. Finding a small mountain, they started circling it, using it for cover. Two MiG-17s came down and made a pass at the lead Skyraider. The two Skyraiders behind the lead aircraft rolled up and fired at the MiGs with their 20mm cannons. Missing the first MiG, they hit the second with their guns, shooting it down. The pilots were Lt. C. B. Johnson and Ltjg. C. W. Hartman III and each were awarded a half credit for the kill. The nine-month combat cruise ended in November when Midway returned to Alameda. For their performance on this cruise, Midway and her air wing, Attack Carrier Air Wing Two, received the Navy Unit Commendation Medal and, in addition, Midway received the Battle Efficiency "E," marking her as the outstanding carrier in the Pacific Fleet.

 

February 1966 saw Midway decommissioned once again in order to undergo the most extensive and complex modernization ever seen on a naval vessel. This upgrade would take four years to complete, but yielded a much more capable ship and made Midway operationally equivalent to the newest conventionally powered carriers. The flight deck was increased in surface area from 2.82 acres to 4.02 acres. The addition of three new deck-edge elevators could now lift 130,000 pounds compared with 74,000 pounds of her sister ships, Franklin D. Roosevelt and Coral Sea. Two powerful new catapults on the bow, three new arresting gear engines, and one barricade were installed and rearranged to accommodate a change of 13 degrees to the angle deck. The smaller waist catapult was removed since it was ineffective in launching the now heavier aircraft. Modern electronic systems were installed, a central chilled water air conditioning system replaced hundreds of individual units, and Midway became the first ship to have the aviation fueling system completely converted from aviation gas to JP-5. Delays, caused partially by the simultaneous construction of USS Horne and modernization of USS Chicago, and unscheduled repairs to the fire damaged USS Oriskany, drove the initial modernization estimate from 87 million dollars to 202 million dollars.

 

1970 was a year of preparation for Midway . Now capable of operating the most modern fleet aircraft, Midway was expected to deliver at least another 15 years of service life. After recommissioning on January 31 and underway in March, Builders Trials, Refresher Training and a Post Shakedown yard period helped bring the ship and crew to a peak of readiness. This was reflected in outstanding performances by the ship in early 1971 during the Interim Refresher Training, a fleet exercise, several Carrier Qualification periods and an Operational Readiness Inspection.

 

On April 16, 1971, Midway began her sixteenth deployment 13,000 tons heavier than her original full load displacement. Arriving off the coast of South Vietnam with Air Wing Five embarked and a crew of 4,500, she relieved USS Hancock, CVA-19 on May 18. This was the beginning of single carrier operations, which lasted until the end of the month. During this time, the ship launched over 6,000 missions in support of allied operations in the Republic of Vietnam. Departing Yankee Station on June 5, she completed her final line period on October 31. Midway returned to Alameda on November 6th, after spending 146 consecutive days at sea. For this deployment, Midway was awarded the Meritorious Unit Commendation.

 

Due to a sudden North Vietnamese invasion of South Vietnam, Midway left on April 10, 1972, for a third Vietnam deployment, seven weeks prior to her scheduled deployment date. On this deployment, Air Wing Five aircraft played an important role in the effort of U.S. forces to stop the flow of men and supplies into South Vietnam from the North. On May 11, aircraft from Midway along with those from USS Coral Sea, CVA-43, USS Kitty Hawk, CVA-63, and USS Constellation, CVA-64 continued laying minefields in ports of significance to the North Vietnamese: Thanh Hoa, Dong Hoi, Vinh, Hon Gai, Quang Khe, and Cam Pha, as well as other approaches to Haiphong. Ships that were in port in Haiphong had been advised that the mining would take place and that the mines would be armed 72 hours later. On August 7, an HC-7 Det 110 helicopter, flying from Midway, and aided by other planes from the carrier and USS Saratoga, CVA-60, conducted a search and rescue mission for a downed aviator in North Vietnam. The pilot of an A-7 aircraft from Saratoga had been downed by a surface-to-air missile about 20 miles inland, northwest of Vinh, on 6 August. The HC-7 helo flew over mountainous terrain to rescue the pilot. The rescue helicopter used its search light to assist in locating the downed aviator and, despite receiving heavy ground fire, was successful in retrieving him and returning to an LPD off the coast. This was the deepest penetration of a rescue helicopter into North Vietnam since 1968. HC-7 Det 110 continued its rescue missions and by the end of 1972 had successfully accomplished 48 rescues, 35 of which were under combat conditions. In October, an aircraft crash landed on Midway's deck. This aircraft ran into a group of parked aircraft and destroyed eight of them, killed 5 crewmen and injured 23 others. On January 12, 1973, an aircrew flying from Midway was credited with downing the last MiG of the war. Upon the signing of the cease-fire on January 15, Midway returned home. The Presidential Unit Citation was awarded to Midway and Carrier Air Wing Five for exceptional heroism for the period April 30, 1972 to February 09, 1973. This award was a rare presentation during the Vietnam War. During this time Midway was on her third Vietnam combat cruise and spent 208 line days on Yankee Station. CVW-5 had five air combat victories including the last downing of a MiG during the Vietnam hostilities. CVW-5 suffered 15 combat and five operational losses in this period.

   

On September 11, 1973, Midway left Alameda on one of her most important voyages to date. Arriving in Yokosuka, Japan on October 5, 1973, Midway and Carrier Air Wing Five marked the first forward-deployment of a complete carrier task group in a Japanese port as the result of an accord arrived at on August 31, 1972 between the United States and Japan. Known as the Navy's Overseas Family Residency Program, Midway's crew and their families were now permanently home ported in Japan. In addition to the morale factor of dependents housed along with the crew in a foreign port, the move had strategic significance because it facilitated continuous positioning of three carriers in the Far East at a time when the economic situation demanded the reduction of carriers in the fleet. It also effectively reduced the deployment cycles of her sister Pacific Fleet carriers.

 

In April 1975, Midway returned to the waters of Vietnam. On April 20, all fixed-wing aircraft of CVW-5 were flown off to NAS Cubi Point and ten USAF 40th Aerospace Rescue & Recovery Squadron H-53's were embarked. Midway, along with USS Coral Sea, CVA-43, USS Hancock, CVA-19, USS Enterprise, CVAN-65 and USS Okinawa, LPH-3, responded to the North Vietnamese overrunning two-thirds of South Vietnam. On April 29, Operation FREQUENT WIND was carried out by U.S. Seventh Fleet forces. As South Vietnam fell, the H-53's from Midway flew in excess of 40 sorties, shuttling 3,073 U.S. personnel and Vietnamese refugees out of Saigon in two days, bringing them onto the ship. Midway's HC-1 Det 2 Sea Kings then transported the evacuees to other ships. One South Vietnamese pilot flew a Cessna O-1 Bird Dog observation plane with his wife and five children out to Midway. He passed a note asking permission to land. The angle deck was cleared and the pilot made a good approach and landed with room to spare. The crew of Midway met him with cheers. For her role in the operation, Midway was awarded the Navy Unit Commendation and the Humanitarian Service Medal.

 

Immediately following Operation FREQUENT WIND, Midway steamed south into the Gulf of Siam to Thailand and brought aboard over 100 American built aircraft preventing them from falling into communist hands. When they were aboard, the ship steamed at high speed to Guam, where the planes were offloaded by crane in record time. After the offload in Guam and a brief stop in Subic Bay, Midway entered the Indian Ocean and operated there from October until the end of November. On November 25, 1975, during post "MIDLINK" exercises, a fatal accident occurred. While attempting to land on the Midway, an aircraft struck the ramp, bolted, impacted the barricade, and struck another aircraft. Flying debris injured two crewmembers. Midway returned to Yokosuka in time to celebrate the 1975 Christmas holiday.

 

In June 1976, Midway participated in Exercise TEAM SPIRIT, an exercise in intense electronic warfare and bombing missions over South Korea. In August 1976, a Navy task force headed by Midway made a show of force off the coast of Korea in response to an unprovoked attack on two U.S. Army officers who were killed by North Korean guards on August 18. Midway's response was in support of a U.S. demonstration of military concern vis-à-vis North Korea.

 

1977 saw Midway participating in MIDLINK '77, a two-day exercise hosted by the Iranian Navy, and included representatives of Pakistan, Turkey, and the United Kingdom.

 

February 1978 saw Midway joining in with the JMSDF (Japanese Maritime Self-Defense Force) for the largest combined exercise to that date. On May 31, 1978, while docked in Yokosuka, Japan, a fire which originated in the exhaust ventilation system, quickly spread through the 3A boiler uptakes on the second deck, and terminated in the main uptake space. The cause of the fire was later thought to be from welding in a vent system containing a fine oil mist which ignited and spread. TEAM SPIRIT '79, exercised in the East China Sea and Sea of Japan, was highlighted by numerous encounters with Russian aircraft.

 

Midway relieved USS Constellation, CV-64 as the Indian Ocean contingency carrier on April 16, 1979. Midway and her escort ships continued a significant American naval presence in the oil-producing region of the Arabian Sea and Persian Gulf. On August 09, while berthed in Yokosuka, Japan, a fire, caused by a broken acetylene line, broke out killing one worker and injuring 17 sailors. Also in August, the Vice President of the United States boarded Midway in Hong Kong for a courtesy visit. On November 18, she arrived in the northern part of the Arabian Sea in connection with the continuing hostage crisis in Iran. Militant followers of the Ayatollah Khomeini, who had come to power following the overthrow of the Shah, seized the U.S. Embassy in Tehran on November 4 and held 63 U.S. citizens hostage. Midway was joined on November 21 by USS Kitty Hawk, CV-63, and both carriers, along with their escort ships, were joined by USS Nimitz, CVN-68 and her escorts on January 22, 1980. Midway was relieved by USS Coral Sea, CV-43 on February 5, 1980.

 

Following a period in Yokosuka, Midway was again on duty on May 30, 1980, this time relieving USS Coral Sea on standby south of the Cheju-Do Islands in the Sea of Japan following the potential of civil unrest in the Republic of Korea. On July 29, Midway collided with the Panamanian merchant ship Cactus while transiting the passage between Palawan Island of the Philippines and the coast of Northern Borneo 450 nautical miles southwest of Subic Bay enroute to Singapore. While Midway sustained no serious damage, two sailors working in the liquid oxygen plant were killed, three were injured, and three F-4 Phantom aircraft parked on the flight deck were damaged. On August 17, Midway relieved USS Constellation, CV-64 to begin another Indian Ocean deployment and to complement the USS Dwight D. Eisenhower, CVN-69 task group still on contingency duty in the Arabian Sea. Midway spent a total of 118 days in the Indian Ocean during 1980.

 

On March 16, 1981, an A-6 Intruder from VA-115 aboard Midway sighted a downed civilian helicopter in the South China Sea. Midway immediately dispatched helicopters from HC-1 Det 2 to the scene. All 17 people aboard the downed helicopter were rescued and brought aboard the carrier. The chartered civilian helicopter was also plucked out of the water and lifted to Midway's flight deck. In September 1981, the Chief of Naval Operations kicked off a tour of Far East Naval Units when he visited Midway while in port Yokosuka.

 

In December, 1983, Midway deployed to the North Arabian Sea and set a record of 111 continuous days of operations.

 

From 1976 until 1983, Midway made six Indian Ocean cruises accounting for 338 days. She made 28 port calls in Subic Bay for 167 days, nine port calls in Hong Kong for 40 days, seven port calls in Pusan, Korea for 32 days, seven port calls in Sasebo, Japan for 28 days, three port calls in Perth, Australia for 16 days, three port calls in Mombassa, Kenya for 14 days, three port calls in Singapore for 11 days, one port call in Karachi, Pakistan for three days, and one port call in Bandar Abbas, Iran for two days. Perhaps it was the exotic nature of Midway's liberty ports that contributed to the "Midway Magic".

 

After several years of dependable overseas service, on December 2, 1984, Midway and her crew were awarded their second Meritorious Unit Commendation, for service rendered from July 27, 1982, until May 1, 1984.

 

On March 23, 1986, Midway collided with a Korean fishing boat in the Yellow Sea. The boat was hit with elevator number one, damaging it but leaving the carrier unscathed. (I have received a report that the boat was North Korean instead of South Korean, as many histories tell it. The basis behind this is that Midway could not send the crew home to the North and were reluctant to give them to the South, which was their enemy.) On March 25, the final fleet carrier launchings of an A-7 Corsair II and an F-4S Phantom II took place off Midway during flight operations in the East China Sea. The Corsairs and Phantoms were being replaced by the new F/A-18 Hornets. On March 31, Midway moored to Dry Dock 6 at Yokosuka Naval Base to begin the "most ambitious work package in its 40-year history." EISRA-86 (Extended Incremental Selected Repair Availability) condensed the workload of a major stateside carrier overhaul from the usual 12-14 months, into an eight-month modernization. This included the addition of the catapult flush deck nose gear launch system, the additions of MK7 MOD1 jet blast deflectors, restack and rereeve of arresting gear engines, installation of larger rudders, the addition of new fire main system valves and pumps, new air traffic consoles, a new viable anti-submarine warfare capability, the construction of intermediate maintenance avionics shops to support the F/A-18 aircraft, and the removal of over 47 tons of unusable cable. Blisters were also built and mounted to the sides of Midway. With this monumental task being completed three days ahead of schedule, the first Air Wing Five F/A-18 Hornet trapped aboard Midway on November 28, 1986.

   

On January 9, 1987, Midway was reactivated with Battle Group ALFA and departed Yokosuka. On May 22, while enroute to Eastern Australia, Midway trapped a VMA-331 AV-8 Harrier operating off USS Belleau Wood, LHA-3. These Harrier operations were the first in Midway's history. On this cruise, Midway was the first U.S. Navy carrier to visit Sydney, Australia since 1972. Over 7,000 visitors toured the ship during the 10 day port call. On July 10, the launch of a VFA-195 Hornet marked the 76,000th catapult shot from the port catapult since Midway's recommissioning in 1970. On November 14, the EA-3B "Whale" made its last run from the deck of Midway. The Whale was replaced by a C-2 Greyhound from VRC-50, which embarked aboard Midway on November 9 for an Indian Ocean deployment. During 1987 and 1988, the ship deployed to the Indian Ocean as part of Operation ERNEST WILL, earning the Armed Forces Expeditionary Medal.

   

At the time of her refit in 1986, hull bulges had to be added to create additional buoyancy to compensate for the increased tonnage. However these ungainly appendages seriously effected Midway's stability. During sea trials in 1986, excessive rolls in moderate seas took green water over her flight deck, thereby hampering flight operations. A 1988 Senate committee, outraged by the inept modifications carried out in the shipyard, voted to retire Midway early as a cost-saving measure. However, after considerable Navy lobbying the committee was overruled, with $138 million voted to remedy her stability dilemma.

  

On March 13, 1989, Midway participated in Exercise TEAM SPIRIT in the waters off South Korea for the second consecutive year. From June 7-8, Midway was put on standby after the massacre in Tiananmen Square for possible evacuation of American citizens from the People's Republic of China.

 

Midway's dependability for rapid response was reaffirmed on August 16, 1989 as she celebrated her 44th year of service by deploying again to the Indian Ocean. On August 28, Midway participated in Exercise THALAY, a three day exercise with Royal Thai Navy ships. On September 9, Midway logged its 200,000th catapult shot since being recommissioned in 1972. On September 30, an F/A-18 Hornet aircraft from the Midway mistakenly dropped a 500-pound bomb on the deck of the USS Reeves, CG-24, during training exercises in the Indian Ocean 32 miles south of Diego Garcia, creating a five-foot hole in the bow, sparking a small fire, and injuring five sailors. On November 10, Midway became the first Navy carrier to pull pier side in Fremantle, Australia. While returning from this cruise, Midway participated in Operation CLASSIC RESOLVE, supporting the Philippine government of President Corazon Aquino against a coup attempt. The operation, run in conjunction with the Air Force and assisted by the USS Enterprise (CVN-65) lasted from December 2 to December 9. For this action, she earned another Armed Forces Expeditionary Medal.

 

1989 and 1990 saw extensive sea time, including deployments to the Northern Arabian Sea and trips to Australia, Diego Garcia, Hong Kong, Kenya, Korea, Philippines, Thailand, and Singapore.

 

From 1973 to 1991, Midway's history is hallmarked by Indian Ocean cruises and port calls at some of the most exotic Far East ports. Being America's first forward deployed ship, Midway remained on the "knife's edge" of readiness and maintained a highly visible presence in the region in support of U.S. policy. Midway no longer went in for overhauls, rather her upkeep was managed through periods of EISRA (Extended Incremental Ship's Restricted Availability). These brief periods allowed Midway to be serviced, but also available at any time. In the post-Vietnam era prior to 1990, Midway earned four Battle Efficiency Ribbons, the Navy and Marine Corps Expeditionary Medal, three Armed Forces Expeditionary Medals, the Humanitarian Service Medal and two Meritorious Unit Commendations.

 

Midway's last two years in commissioned service would prove to be perhaps her most historic. In 1990, while celebrating 45 years of service, Midway received official announcement on her decommissioning. An announcement in February confirmed that she was scheduled to decommission in 1991. Even with this announcement, Midway continued to maintain her seagoing reputation by being underway more than most other aircraft carriers. With her unique combination of modernized strength and years of experience, she strived to maintain peace and stability in the Western Pacific.

 

Disaster struck the Midway on June 20, 1990. While conducting routine flight operations approximately 125 nautical miles northeast of Japan, the ship was badly damaged by two onboard explosions. These explosions led to a fire that raged more than ten hours. In addition to damage to the ship's hull, three crew members died and eight others were seriously injured in the line of duty. All 11 crewmen belonged to an elite fire-fighting team known as the Flying Squad. When Midway entered Yokosuka Harbor the next day, 12 Japanese media helicopters flew in circles and hovered about 150 feet above the flight deck. Three bus loads of reporters were waiting on the pier. About 30 minutes after Midway cast its first line, more than 100 international print and electronic journalists charged over the brow to cover the event. The news media made a major issue out of the incident, as it happened amid other military accidents. It was thought that the accident would lead to the ship's immediate retirement due to her age.

 

Despite the announced decommissioning and the fire, Midway's role as a potent member of the U.S. Naval forces was again reaffirmed when she departed Yokosuka, Japan on October 2, 1990 in support of Operation DESERT SHIELD. On November 2, 1990, MIDWAY arrived on station in the North Arabian Sea, relieving USS Independence, CV-62. For the DESERT SHIELD portion of the campaign, Midway was the only carrier in the Persian Gulf. She was the first carrier to operate extensively and for prolonged periods within the mined waters of the Gulf itself. On November 15, she participated in Operation IMMINENT THUNDER, an eight-day combined amphibious landing exercise in northeastern Saudi Arabia, which involved about 1,000 U.S. Marines, 16 warships, and more than 1,100 aircraft. Midway also made the first Persian Gulf port call for an aircraft carrier when she visited Abu Dhabi, United Arab Emirates for Christmas of 1990. Midway was also the flagship of the Persian Gulf Battle Force Commander, Rear Admiral Daniel P. March (Commander Task Force 154). Admiral March was the operational commander for all coalition naval forces within the Persian Gulf.

   

Meanwhile, the United Nations set an ultimatum deadline of January 15,1991 for Iraq to withdraw from Kuwait. After steaming for two and a half months in the North Arabian Sea, Operation DESERT STORM, the fight to liberate Kuwait, began on January 17, 1991. Aircraft from Midway flew the initial air strikes of Operation DESERT STORM. An A-6E Intruder from the "Nighthawks" of VA-185 flying from Midway became the first carrier-based aircraft "over the beach" during that first strike. During the conflict, Midway's aircraft flew 3,339 combat sorties, an average of 121 per day during the war. Midway aircraft dropped 4,057,520 pounds of ordnance on targets in Iraq and occupied Kuwait.

   

The jet aircraft aboard Midway were not alone in taking the fight to the Iraqis. HS-12 conducted two Combat Rescues, rescued and captured a total of 25 Iraqi sailors, destroyed nine mines, and captured the first piece of Kuwaiti soil - a small island (the only property captured or liberated by the Navy). HS-12 also recovered the body of an Iraqi Naval Officer who had apparently been killed by his crew. At the end of the war, HS-12 chased down an escaping speed boat and forced it ashore on another island. The four captured occupants turned out to be members of the Iraqi Secret Police.

 

After 43 days of combat, Kuwait had been liberated with a resounding defeat of Iraqi forces. Operation DESERT STORM ended at midnight on February 27, 1991. Midway was the only one of the four carriers operating in the Persian Gulf to lose no aircraft or personnel. Midway departed the Persian Gulf on March 10 and returned to Yokosuka, Japan. For her actions during Operations DESERT SHIELD and DESERT STORM, Midway again received the Battle Efficiency Award and the Navy Unit Commendation.

  

Midway's versatility was again demonstrated in June of 1991 with her participation in Operation FIERY VIGIL. On June 16, Midway was given one day's notice to sortie from her berth in Yokosuka, Japan and steam at high speed for Subic Bay Naval Base in the Philippines to assist with the evacuation of military personnel and their families following the volcanic eruption of Mt. Pinatubo.

   

Prior to departing, Midway crewmen worked through the night loading enough food and supplies to provide for 5,000 people for two weeks. Items included 1,100 cots, pet food, and baby diapers and bottles. Within 24 hours of receiving notice of the emergency, Midway was underway with the helicopters of HS-12 as the sole representative of Air Wing Five embarked.

   

Midway made her best speed toward Subic Bay, slowing briefly near Okinawa to embark six helicopters from HMH-772 and a contingent of Marines. The ship arrived at Subic Bay June 21 and brought aboard 1,823 evacuees, almost all of them Air Force personnel leaving Clark Air Base. Additionally, Midway brought aboard 23 cats, 68 dogs, and one lizard, pets of the evacuees. Midway's guests were greeted with a clean bed, a hot shower, and a steak dinner, their first hot meal in more than a week.

   

In a trip which included a high-speed night transit of the Van Diemen Passage, Midway took the evacuees to the island of Cebu in the Philippines. On arrival, HS-12 and HMH-772 flew them to Mactan International Airport. There, the evacuees boarded Air Force transport planes for flights that would eventually take them to the United States.

   

In August 1991, Midway departed Yokosuka, Japan for the last time, steaming towards her first United States port call in almost 18 years. She had been the first carrier to be "forward deployed" in a foreign country, sailing for 17 years out of Yokosuka, Japan. Arriving in Pearl Harbor, Hawaii, Midway turned over the duty as the "Tip of the Sword" to USS Independence, CV-62. Independence would be replacing Midway as the forward deployed carrier in Yokosuka, Japan. This turnover included swapping CVW-5 for CVW-14, the first air wing change for Midway in 20 years. After leaving Hawaii, Midway made a brief visit to Seattle, Washington, where more than 50,000 people visited the ship during a three-day open house.

   

On September 14, 1991, Midway arrived at her final homeport, Naval Air Station North Island in San Diego, California. Her crew then began the tremendous task of preparing the ship for decommissioning and preservation as part of the Ready Reserve Fleet.

   

As part of her decommissioning preparation, the Navy sent out a Board of Inspection and Survey team to assess the ship's material condition and evaluate her capabilities. To perform this inspection, the ship got underway for one last time on September 24, 1991. On this day, the ship successfully completed a rigorous series of tests, including full-power sea trials. Midway trapped and launched her last aircraft that day, with the honor falling to Commander, Carrier Air Wing Fourteen, Captain Patrick Moneymaker, flying an F/A-18 Hornet. At the completion of the day's events, Midway headed for home at 32 knots. Despite her age and imminent decommissioning, the inspection team found Midway fully operational and fit for continued service, a testimonial to the men who maintained the ship throughout her many years. At the end of her career, Midway's last embarked flag officer, Rear Admiral Joseph W. Prueher noted, Midway had "sprinted across the finish line."

   

Midway was decommissioned for the last time at North Island Naval Air Station in San Diego, California on April 11, 1992. She was stricken from the Navy List on March 17, 1997 and was stored at the Navy Inactive Ship Maintenance Facility, Bremerton, Washington.

   

On September 30, 2003, a long awaited event happened... after eleven years, Midway was finally underway again! Although only under tow by the Foss Maritime Company's tugs Lauren Foss and Lindsey Foss, she was heading back out to sea for another voyage. With the Lindsey Foss only assisting during the harbor transit, the Lauren Foss continued towing Midway on her journey to Oakland, California.

   

October 07, 2003 saw Midway arriving at the Charles P. Howard Terminal in Oakland, California. Restoration work was performed before Midway was again taken under tow on December 31. The Foss Maritime Company's Corbin Foss towed Midway down the coast of California, arriving in San Diego Bay on January 05, 2004. Midway was temporarily berthed at NAS North Island to load restored aircraft and also add ballast and equipment in preparation for her move across the bay to Navy Pier.

   

Midway's final journey occurred on January 10, 2004. Several hundred guests were aboard as she was towed across San Diego Bay to her new home at Navy Pier. With much celebration and ceremony, Midway was berthed at Navy Pier, where she officially opened as the San Diego Aircraft Carrier Museum on June 07, 2004. Once again, Midway's popularity showed as 3,058 visitors went aboard on opening day.

  

Conceived and built during the desperate days of World War II, the carriers of the Midway class carried a crew of 4,500 and up to 70 aircraft. The 1,000 foot-long Midway was once the largest carrier afloat, growing from 45,000 tons in 1945 to 74,000 tons in 1991. However, she had a displacement about two-thirds that of contemporary nuclear-powered flattops. When operating at sea the ship was refueled every three days, burning approximately 100,000 gallons of oil a day. When first built, the Midway's bow was open to the sea, and was enclosed in 1957 as part of a major overhaul.

 

The ability to adapt to new technologies, systems, platforms, and operational needs is nowhere better exemplified than in the design and 50-year operational history of the USS Midway. Designed during World War II, in 1945 this "flattop" initially operated piston-driven propeller aircraft, yet returned from her last deployment in 1991 with the Navy's most modern, multipurpose strike-fighters. Her original axial-deck design was modified to an angled-deck layout, her original hydraulic catapults were replaced with more powerful steam catapults, and the most basic electronics replaced by advanced sensors and communications equipment.

 

USS Midway Aircraft Carrier CV-41 Museum-San Diego Ca.

Greeting from a business trip with a big workload.

 

Enjoy a nice summer evening 😍

  

Thank you all for favorising and commenting.

 

Love Awena 💋💋

View Large On Black

 

Hello World! LOL

Long weekend is coming and it feels like Friday today.

 

I'm excited for the weekend sleeping marathon but super stressed at the same time with the zipped workload and Japanese proficiency mock exam tomorrow (crazy level 2, which I really don't care! bwahahaha). I tried to study yesterday, but I ended up playing with photoshop (don't take it seriously 'coz it sucks... i'm not really good in manipulating stuffs) after an hour of staring at the kanjis.

 

Have a great weekend everyone!

Premier Loft, Studio M Hotel, Singapore

 

Indeed! Especially couple, it's a huge knowledge in fact it is larger than we thought. In this era of reality, our life mostly squeeze in with tons of our workload. Those whose job are require working shift pattern, how many times did you spend your time, sit down together start a very interesting conversation with your loves one?

 

This year, it's been always a toughest year to me and at some points I feel lucky that I still able to plan out at least one agenda to do what i really wanted to do long ago.

 

I always considered myself the lucky one, that i have a very understanding wife. Her supportive always comfort my heart, taking great care of me by start picking up her cooking skills. At times, i found her tolerance has gone far beyond an ordinary woman. She never got me to worry about, i would say she spent most of her time herself alone. As a man, i feel guilt enough that i didn't really spare my times to listen what her bottom heart contain about. That's where i planned out this shooting for our own, to at least make it up for our own outing.

 

Articles always state both couple should always compromise each other, and i knew i failed that badly. I do have plans in mind for our agenda next year. So that i will make it up for her which i promised her long back...

  

You must see this on large View On White

  

----

P/s : This is new Camera Raw v6 editing, CS5 parts can be seen in the commentary too.

* Thanks to Manfrotto tripod and wireless remote control *

  

The Mersey Ferry is a ferry service operating on the River Mersey in north west England, between Liverpool and the Wirral Peninsula. Ferries have been used on this route since at least the 12th century, and continue to be popular for both local people and visitors.

The current fleet consists of three vessels, which were all originally from the 1960s and were named Mountwood, Woodchurch and Overchurch. All three ferries have been extensively refurbished and renamed Royal Iris of the Mersey, Snowdrop and Royal Daffodil respectively. The ferries share the workload of cross-river ferrying, charter cruises and the Manchester Ship Canal cruise. The service is managed by Merseytravel.

In 1150, the Benedictine Priory at Birkenhead was established. The monks used to charge a small fare to row passengers across the river. At this time, the Mersey was considerably wider with sand dunes and marshes to the north leading up to Ainsdale beach and sandstone cliffs and shorelines to the south near Otterspool. The only suitable landing point for the ferry was in the Pool, near the site of the present Merseyside Police headquarters. Weather often stopped crossings and passengers were delayed for days, taking shelter at the priory.

In 1317, a royal licence was issued, granting permission to the Priory to build lodging houses for men crossing the river at Woodside. King Edward II visited Liverpool in 1323, and the royal accounts show that he used local ferrymen to sail up the river to Ince. In 1330, his son Edward III granted a charter to the Priory and its successors for ever: "the right of ferry there… for men, horses and goods, with leave to charge reasonable tolls". At the time, there was only a small hamlet at Birkenhead, and a slightly larger village at Liverpool.

The Chester Indictments record criminal activities on the Mersey ferries in the 14th and early 15th centuries. In 1355, Richard, son of Simon de Becheton, was murdered on the ferry; the murderers escaped and took refuge at Shotwick. In 1365, it was recorded that there were four ferryboats operating without a licence, from Bromborough and Eastham. In 1414, William de Stanley, the servant of John Talbot, later Earl of Shrewsbury, was on the ferry between Birkenhead and Liverpool when about 200 men assaulted him, and stole his bay horse valued at £5 (current value - over £2,800), a bow and 14 arrows valued at 3s 4d (current value - over £95) and a barge valued at £10 (current value - over £5,700). The thieves were fined.[2]

A licence was issued in 1357 to the Poole family by Edward, the Black Prince, for a ferry from Eastham. The licence then passed to the Abbey of St Werburgh, in Chester, and became known as Job's Ferry. Early ferries also existed across the Mersey further upstream, at Ince and at Runcorn.

 

FERRY CROSSING RIVER MERSEY LIVERPOOL

 

See where this picture was taken. [?]

After visiting Haifa's Baha'i Gardens we wandered the streets below - "The German Colony".

 

This building at 10 Haparsim Street, also known as the Western Pilgrim House, is a Bahá’í property.

 

It has served several important functions of the Bahá’í World Centre and is currently a site visited during Bahá’í pilgrimage to the Holy Land.

 

TMI

 

History:

Bahá’u’lláh pitched His tent on the site where the building currently stands at some point during His lifetime.

 

In 1919 the land was donated by a Persian Bahá’í to be used for the construction of a building to house pilgrims as there was an increasing number of pilgrims from the West and the building serving as a Western Pilgrim House was too small.

 

In November 1919 W. H. Randall donated the funds to assist in the construction of the building, and designs for the building were prepared at the request of ‘Abdu’l-Bahá.

 

The design selected for the building was prepared by Charles Mason Remey.

 

Shoghi Effendi oversaw the beginning of construction of the building on April 9, 1922, however funds soon ran out and construction was suspended.

 

In 1923 Amelia Collins donated the funds for the completion of the building while on pilgrimage and it was finished in 1926.

 

As of 1927 Australian Bahá’í Effie Baker had moved to the Holy Land and was serving as the hostess of the Western Pilgrim House and Shoghi Effendi renovated the building that year with new furniture.

 

There was a large oval room on the first floor on the north side of the building which was used as a dining room where the western pilgrims would eat and Shoghi Effendi would join them for dinner using a small antechamber room which lead directly from outside to the dining room to enter and leave the building.

 

From 1951, 10 Haparsim Street was used as the offices of the International Bahá’í Council in addition to continuing to accommodate pilgrims, with all members of the Council using it as their residence while serving in the Holy Land.

 

In 1961 the Custodians reconstituted the International Bahá’í Council as an elected body and the elected membership converted the dining room of 10 Haparsim Street which Shoghi Effendi used to meet with pilgrims into its consultation chamber and converted the chamber between the dining room and outside which Shoghi Effendi used to leave the building into an office.

 

In June 1963 it became the Seat of the Universal House of Justice and due to the workload of the body it was decided that the whole of the building was required and it ceased to be used to accommodate pilgrims.

 

On February 2, 1983, the Universal House of Justice moved its seat to the newly constructed Seat of the Universal House of Justice, and on April 15, 1984, the International Teaching Centre occupied the building as its seat.

 

In 2001 the International Teaching Centre moved its seat to the International Teaching Centre Building, and as of 2003 10 Haparsim Street is used as the offices of the Bahá’í International Community Secretariat.

Visibility was reduced this week, and the surge made macro shooting a challenge, but I embraced the workload and came home with some decent slug shots.

My portrait of Claudia was taken at The Hive in Shrewsbury on October 10th. 2015 just prior to a Shrewsbury Jazz promoted Asaf Sirkis Band concert.

  

Having successfully completed a three year apprenticeship in Studio Ceramics in 1996 Claudia was awarded a 'Leonardo da Vinci Travel Bursary', which enabled her to move to the UK. Once here she worked for seven years as first assistant to a British ceramic artist before setting up her own studio in Wales in 2004. She says, "I have focussed on developing a quiet body of celadon wares inspired by examples of Oriental stoneware and porcelain vessels". Her work comprises pieces which come to life functionally as much as they are appreciated aesthetically as part of her still life assemblies.

Over the years her work has been widely exhibited. Some of the highlights include the showing of her work at the Smithsonian Institute, Washington DC, and the Saatchi Gallery and the Royal College of Art in London.

She is a Fellow of the CPA (Craft Potters Association) which is the national body of British ceramic professionals and recipient of the 'Creative Wales Award 2012/13' from the Arts Council of Wales.

  

Claudia's interest in jazz was sparked by witnessing a performance by two female jazz musicians at The International Jazz Festival Viersen (see the second of her Take 5 choices). This laid the foundation for her on-going love of live jazz.

In an effort to escape the isolation of being a full time craftsperson Claudia joined Shrewsbury Jazz Network. Says she, "with new arrivals on the committee to spread the workload I was able to fully focus on my main role of 'Band Liaison, Bookings & Hospitality', which involves all dealings with the band from initial application stage, band selection, programming, bookings, preparation and co-ordination of the concert nights through to tying up various loose ends". Her engagement with Shrewsbury Jazz Network has become an essential but very rewarding part of her life. Its her second (unpaid) job.

Somehow she has also found time to begin learning to play alto saxophone and has just taken her first exam Grade 4, "with a squeaky reed". "The house next door is still empty", she says. Could this have anything to do with her acquisition of a "new toy"? Her first drum kit!

  

Take 5:

  

‘Walk Cheerfully’, a silent 1930s Japanese gangster movie directed by Yasujiro Ozu - a humorous love story of a petty criminal who changes his ways on discovering true love with a sincere young woman. In April 2013 I was very fortunate to be guest at a special showing at the BFI. On this occasion a soundscape for the movie was created and performed live by London musician Clive Bell who specialises in Japanese woodwind instruments. He was supported by the actress Tomoko Komura who - as one of the few still existing ‘Benshi’ - acted out a live voice-over that involved lending all characters distinct voices whilst also doubling up as narrator. A wonderful amalgamation of the three art forms of film, music and live acting – outright beautiful! In the onslaught of life’s challenges ‘Walk cheerfully!’ has become my favourite slogan, with which I sign most of my correspondence.

www.bfi.org.uk/news-opinion/news-bfi/video/video-yasujiro...

 

‘Looking for Love’, a 1987 recording of a live performance by Portuguese Jazz singer Maria Joao and Japanese pianist Aki Takase; a very personal album to me, as it was recorded in the first year of their musical collaboration, in which I coincidentally had the pleasure to see them at the ‘International Jazz Festival Viersen’ in my German hometown; I hold both of them responsible for getting me hooked on Jazz. A nice twist to the story: During my alto sax practices for my Grade 4 exam I was accompanied by a musician friend on her piano - which was once owned by Aki Takase! www.youtube.com/watch?v=tQ7beihDgqo

 

‘Jig Doll’, a lyrical one-person stage show created and performed by Hannah James, combining vocals, accordion, foot percussion and incredibly energetic clog dance; a contemplation of the transient nature of performing arts and ultimately, life itself. An impressively creative young artist! www.jigdoll.co.uk/

 

‘Yufuku Gallery’ (Tokyo, Japan), a virtual visit to my favourite Gallery featuring the work of wonderfully skilled ceramic artists who display great sensitivity in the way they translate their ideas into clay. Please pay special attention to S. Nagae, A. Maeta, K. Moriyama and Y. Byong-uk. www.yufuku.net/artists

 

‘Italian Short Stories’, a 2014 recording by saxophonist Tommaso Starace’s Italian Quartet playing original compositions inspired by photographs of Gianni Berengo Gardin. Come and see Tommaso together with pianist Michele Di Toro performing at Shrewsbury Jazz Network in September 2016 – you will have a great night whilst helping us to keep live Jazz a feature of British culture! www.tommasostarace.com/

  

www.shrewsburyjazznetwork.co.uk/

Links to Claudia’s ceramics:

artaurea.com/profiles/lis-claudia/

www.caa.org.uk/members/members-search/

howtospendit.ft.com/home-accessories/3129-glaze-of-glory

   

Coachwork by Pininfarina

Chassis n° 1625GT

 

Bonhams : the Zoute Sale

Estimated : € 600.000 - 800.000

Sold for € 989.000

 

Zoute Grand Prix 2018

Knokke - Zoute

België - Belgium

October 2018

 

By the early 1960s, road car production had ceased to be a sideline for Ferrari and was seen as vitally important to the company's future stability. Thus the 250, Ferrari's first volume-produced model, can be seen as critically important, though production of the first of the line - the 250 Europa, built from 1953 to '54 - amounted to fewer than 20. Before the advent of the Europa, Ferrari had built road-going coupés and convertibles in small numbers, usually to special customer order using a sports-racing chassis as the basis. Ghia and Vignale of Turin and Touring of Milan were responsible for bodying many of these but there was no attempt at standardisation for series production and no two cars were alike.

 

The introduction of the 250 Europa heralded a significant change in Ferrari's preferred coachbuilder; whereas previously Vignale had been the most popular carrozzeria among Maranello's customers, from now on Pinin Farina (later 'Pininfarina') would be Ferrari's number one choice, bodying no fewer than 48 out of the 53 Europa/Europa GTs built. Pinin Farina's experiments eventually crystallised in a new Ferrari 250 GT road car that was first displayed publicly at the Geneva Salon in March 1956. However, the Torinese carrozzeria was not yet in a position to cope with the increased workload, resulting in production being entrusted to Carrozzeria Boano after Pinin Farina had completed a handful of prototypes.

 

True series production began with the arrival of Pininfarina's 'notchback' Coupé on the 250 GT chassis, some 353 of which were built between 1958 and 1960 within the sequence '0841' to '2081'. However, the relatively small scale of production meant that cars could still be ordered with subtle variations according to customer's choice, as well as enabling a handful of show cars and 'specials' to be constructed on the 250 GT chassis.

 

A number of important developments occurred during 250 GT production: the original 128C 3.0-litre engine being superseded by the twin-distributor 128D, which in turn was supplanted in 1960 by the outside-plug 128F engine which did away with its predecessor's Siamesed inlets in favour of six separate ports. On the chassis side, four-wheel disc brakes arrived late in 1959 and a four-speeds-plus-overdrive gearbox the following year, the former at last providing the 250 GT with stopping power to match its speed. More refined and practical than any previous road-going Ferrari, yet retaining the sporting heritage of its predecessors, the 250 GT is a landmark model of immense historical significance.

 

The example offered here, chassis number 1625', left the factory in January 1960 destined for California, USA but was actually delivered to Jacques Swaters' Garage Francorchamps in Belgium. It is a rare 2nd Series example, the most sought after series in the 250 GT Pininfarina coupé range. first owner was Mr Theo de Montpellier, who purchased the car on 4th February 1960, subsequently passing to Mr Louis Galand. The third owner is not known.

 

According to a registration document on file, fourth owner Mr Jean-Marie Cap acquired the Ferrari on 24th December 1976. From 15th May 1978, the car was owned by Ferrari collector Mr Ennio Gianarolli, who kept it on display as part of his collection but did not register it. The current owner purchased '1625' on 7th February 2005.

 

In March 2005, the Ferrari was despatched to Carrozzeria Nova Rinascente in Vigonza, Italy to be restored by the internationally renowned Dino Cognolato and his team of specialist craftsmen. The Ferrari received an exemplary restoration of the chassis, body, and all brightwork including the bumpers, front grille, window surrounds, door plates, etc, and the multiple Ferrari and Pininfarina badges.

 

The mechanical side of the rebuild was entrusted to Corrado Patella's Omega Officina, another recognised specialist in the restoration of Ferrari of road and competition cars. Corrado Patella carried out a full mechanical restoration, which included the engine, carburettors, gearbox, overdrive, axle, suspension, brakes, radiator, etc. The electrical system was overhauled by Elettrauto Franco, which also restored and the refurbished all the dashboard instruments. Luppi of Modena re-trimmed the interior, while the carpets and headlining were renewed by Dino Cognolato. Equipped with new 16" Borrani wire wheels, the fully restored Ferrari left Cognolato's workshop in March 2009, since when it has won the Prix d'Élégance at the Zoute Concours (in 2014). Accompanying documentation consists of the all-important Ferrari Classiche 'Red Book', restoration invoices, and Belgian Carte Grise, and the car also comes with its tool kit and jack.

 

Lastly, the owner has kindly provided us with his driving impressions: 'Once the driver is comfortably installed behind the Nardi steering wheel, he or she is afforded an unobstructed view of the dashboard in a perfect combination of ergonomics and aesthetics. Once started, the engine emits an evocative yet subdued growl, and is supremely flexible on the road. The clutch is not heavy and the gearbox is a delight, its synchromesh beyond reproach, while the overdrive facilitates fast cruising without having to overtax the engine. Handling is excellent, and the four-wheel disc brakes mean that the limits of the car's performance can be explored safely.'

These many attributes and the presence of a generously sized luggage compartment simply invite one to travel; this Ferrari 250 is not designated a Gran Turismo without good reason. Possessing a rare elegance, this beautiful Pininfarina-style Ferrari will appeal to the connoisseur of aesthetics every bit as much as to the enthusiast driver.

My workload over the next few months means that I’m going to scale back my flickr posts to 3 or so times a week for a while. All will return to normal shortly!

 

Thanks a lot for your visits and comments, I really appreciate them!

So in Australia we now have this Harry Potter Ultimate Collection, and this is from Day 11 (just today!)

The best thing about this pack which made it better than yesterday's pack is that it has Tom in it.

...YES I LIKE DRACO MORE THAN HARRY!! ♥

 

I know this isn't a flickr-worthy photo but I really want to share this :')

If you guys like Harry Potter, or Tom, or Draco, feel free to tag yourself in here x)

And I encourage people to tumblr this, share the love eh ♥, just LINK BACK TO ME.

 

Starting to get the hang of workload in uni, I'll need to think of something to take pictures of to post here, miss ya ♥

 

|| My facebook || Dailybooth! ||

Scanned lith print.

 

Just checking the premises. My human is a lazy bastard when it comes to that. It's amazing how much extra workload you get on your shoulders...

 

Hasselblad 500CM w/ Zeiss 80 mm F2.8. June 1, 2024.

 

Fomapan 100 in Adonal 1+100, semistand 1 hour.

 

Lith printed on Foma Retrobrom Sp 151 (8x10") with Moersh Easy Lith 20A+20B+150mlOB+H2Oqs700ml.

 

Toned in Se 1+9, 60 sec.

 

A unique feature (or flaw) of Retrobrom is the sometimes crackelated surfce that reminds of an old oil painting. Enlarge to see that better.

  

Amish corn fields, cold and desolate, in the depths of winter. A mist in the air, ice crusted snow underfoot, the air is still and silent. In the distance the familiar clip clop as an Amish family goes about their day in their horse and buggy. Life slows down and almost stops and then the wind blows.

 

—

 

Amish stack the corn in these stacks called corn shocks.

 

A hundred years ago, corn harvesting required more labor than any other farm crop. Corn was used not only for grain, but the stalk and leaves made good feed for horses, cattle, and sheep.

 

Farmers had to chop down the cornstalks one at a time, and stack them in shocks to dry. A field of shocks, like hundreds of teepees in straight rows, was a magnificent sight.

 

But this was not all. After the stalks had dried, they were loaded on wagons and taken to the farmstead. Then they were shucked by hand or by machine. Some parts went into the barn for livestock, while the ears were moved to a corncrib for further drying.

 

Sometimes the corn was shucked in the field from standing stalks. The ears were stripped from the stalk and tossed into a wagon, which was slowly moved through the field. This greatly increased the farmer's workload and was a terrible task.

 

As machines were invented, the time needed to harvest corn was lessened. Also, farmers could grow more corn without increasing the workload too much. Early machines took over cutting and bundling of stalks but left a lot of handwork such as hauling and shucking to the farmer.

 

Since the Amish still cling to "old ways" (which is NOT a bad thing in my opinion) you will see a lot of fields with corn shocks like that.

 

The raw photo was processed in lightroom for overall exposure and to remove some distractions. I then processed the photo in onOne Layers and effects for a color version and finally in macphun tonality for the B&W conversion.

 

Prints of this photo are available here

Handheld shot

 

Built in 1860, this water-powered mill in Bridgewater is the only survivor of an early industrial park that included seven small workplaces. Wile Carding Mill lightened the workload for local farm families until 1968. Women workers operated the machines that carded the wool. The mill ran six days a week in the busy season, 24 hours a day. One of its machines could card in one hour the same amount of wool that a person carded in a whole week.

 

Info from: museum.gov.ns.ca/wcm/

Coachwork by Pininfarina

Chassis n° 1247GT

Body n° 118

 

By the early 1960s, road car production had ceased to be a sideline for Ferrari and was seen as vitally important to the company's future stability. Thus the 250, Ferrari's first volume-produced model, can be seen as critically important, though production of the first of the line - the 250 Europa, built from 1953 to '54 - amounted to fewer than 20. Before the advent of the Europa, Ferrari had built road-going coupés and convertibles in small numbers, usually to special customer order using a sports-racing chassis as the basis. Ghia and Vignale of Turin and Touring of Milan were responsible for bodying many of these but there was no attempt at standardisation for series production and no two cars were alike.

 

The introduction of the 250 Europa heralded a significant change in Ferrari's preferred coachbuilder; whereas previously Vignale had been the most popular carrozzeria among Maranello's customers, from now on Pinin Farina (later 'Pininfarina') would be Ferrari's number one choice, bodying no fewer than 48 out of the 53 Europa/Europa GTs built. Pinin Farina's experiments eventually crystallised in a new Ferrari 250 GT road car that was first displayed publicly at the Geneva Salon in March 1956. However, the Torinese carrozzeria was not yet in a position to cope with the increased workload, resulting in production being entrusted to Carrozzeria Boano after Pinin Farina had completed a handful of prototypes.

 

True series production began with the arrival of Pininfarina's 'notch back' Coupé on the 250 GT chassis, some 353 of which were built between 1958 and 1960 within the sequence '0841' to '2081'. However, the relatively small scale of production meant that cars could still be ordered with subtle variations according to customer choice, as well as enabling a handful of show cars and 'specials' to be constructed on the 250 GT chassis.

 

A number of important developments occurred during 250 GT production: the original Colombo-designed 128C 3.0-litre engine being superseded by the twin-distributor 128D, which in turn was supplanted in 1960 by the outside-plug 128F engine which did away with its predecessor's Siamesed inlets in favour of six separate ports. On the chassis side, four-wheel disc brakes arrived late in 1959 and a four-speeds-plus-overdrive gearbox the following year, the former at last providing the 250 GT with stopping power to match its speed.

 

More refined and practical than any previous road-going Ferrari, yet retaining the sporting heritage of its predecessors, the 250 GT is a landmark model of immense historical significance. According to Martin Buckley (Classic & Sports Car, February 2014), of the 350 built, only 68 Series I and 83 Series II cars survive.

 

This example was completed at Pinin Farina's Grugliasco works on 9th January 1959 and is the 118th of the 353 cars built. Originally finished in two-tone Bianco Savid (bottom) and Grigio Conchiglia (top) with Nero part-leather interior, chassis number '1247' is a 'Series I' model equipped with the Tipo 128D engine, disc brakes, and aluminium doors, bonnet, and boot lid. Later in 1959, the Ferrari was sold new to Andre Vanoni in Algeria, subsequently passing to Paul Saurin, who kept it for 23 years before selling it to Pierre Marie Knoll. Mr Knoll sold '1247' to the current vendor in 2012.

 

During 2012/2013, the Ferrari was restored (interior and exterior) by Espace Century of Wissous, France before participating in the 2013 Tour Auto Optic 2000, run from Paris to La Rochelle. Competitor number 'VIP2', the car completed the 2,025-kilometre, five-day event without problems, and the following year participated in the XIII Modena Cento Ore Classic.

 

Finished in Ferrari Rubino Rosso with black interior, '1247' represents a wonderful opportunity to acquire an example of this landmark, yet undervalued, Ferrari GT that helped cement Maranello's continuing relationship with Carrozzeria Pininfarina. Accompanying documentation consists of a Massini Report, restoration invoices and photographs, and a French Carte Grise.

 

Les Grandes Marques du Monde au Grand Palais

Bonhams

Sold for € 437.000

Estimated : € 450.000 - 550.000

 

Parijs - Paris

Frankrijk - France

February 2017

deVries - ALBERTA

 

Universal Carrier with mixer workload body.

 

Camion Universal carrier équipé avec bétonnière.

 

Photo: Murray Markanen

Class 353 Talgo loco no. 353005 "Virgen de la Bien Aparecida" at Mérida on 19 April 1997 working train 190, 08:00 Madrid Atocha to Badajoz.

 

5 of these locos were built by Krauss-Maffei with Maybach engines and transmission in 1968/9. As with other similar classes had matching livery with the Talgo III stock as seen behind. With expansion of electrified and high speed lines, the workload for these diesel locos was reduced. Final examples were withdrawn in 2003 and the example seen here was preserved at the railway museum in Vilanova near Barcelona.

Photography: David Gilliver

Hair & Makeup: Mish Bratsos

Modelling & Retouching: Kelly Kooper

 

After 3 months of working full time and studying most nights and weekends, Term 1 is over next week. Then we have 1 week's break and then back into it again.

 

It's been such a whirlwind. It wasn't as difficult as I thought it would be and I'm proud of myself for pushing through, especially on nights where I was exhausted and just wanted to go to bed. The workload has been tough to manage at times but my boss has been very supportive and that's made a big difference.

 

Turns out it's never too late to learn new things. Who knew? :P

 

Hard working man silhouette, Delhi

A few weeks after accepting a position that saw me move to southern Ontario, it was time to go and find some new railfan spots.

 

The obvious starter was Lobo Siding, just west of London, where CN's Strathroy subdivision and CP's Windsor subdivision briefly parallel each other under a quiet bridge that provides access to a few homes. Here we see CN 330, which runs from Sarnia to Port Robinson, pulling upgrade and under the bridge with a nice leader. Just a few weeks after I took this photo, 330 and counterpart 331 were discontinued and their workload transferred to other trains.

Carnet de campagne d’un candidat para-commando.

 

Nous sommes dans notre huitième semaine de formation !

Pas mal de mes collègues ont abandonné la formation suite à diverses blessures.

Au programme cette semaine : progression tactique et réaction contact ainsi qu’un parcours d’orientation de nuit que nous appelons « Dropping ».

Départ au point de drop (largage) à 20 h et arrivée au bivouac le lendemain à 6 h, je dormirai vite et fort si j’ai de la chance !

Un parcours très technique en orientation et très physique de par son dénivelé dans la région d’Arlon.

Pour ce dropping, nous emportons tout notre matériel comme en opération, ce qui correspond à 30 kilos de charge opérationnelle sur l’homme.

Vers 03 heures du matin, sous la pluie battante, le sac est de plus en plus lourd, je le remonte en permanence sur mes épaules et je pense à mes amis et proches qui, à cette heure dorment au chaud, je me pose plusieurs questions….mais qu’est ce que je fous là ?

Mais rien non je ne plierai pas, je continue à avancer, je veux être Para-Commando !

La formation Para-Commando c’est aussi une formation du caractère où la rusticité, l’adversité, la rigueur, le dépassement de soi en sont les clés.

 

Translation

 

Notebook of campaign of a candidate para - commando.

 

We are in our eighth week of training!

Many of my colleagues have abandoned the training following various injuries.

In the program this week: Progression and tactical response contact and a course orientation night that we call ' dropping '.

Departure to the point of drop ( dropping ) at 20 a.m. and arrived in bivouac on the next day at 6 h, i'll sleep hard and fast if i am lucky!

A journey very technical in orientation and very physics of by his grade separated in the region of arlon.

For this dropping, we have all our equipment as in operation, which corresponds to 30 Kilos of operational workload on the man.

Around 03 hours of the morning, in the rain warrior, the bag is increasingly Heavy, i the dates back permanently on my shoulders and i think of my friends and relatives who, At this hour sleep warm, i ask myself several issues.... But that is what i am doing here?

But nothing i will not bend over, i continue to move forward, i want to be para commando!

The training para commando it is also a character education where the rusticité, adversity , rigour, the exceedance oneself in are the keys.

Making my way down to Pocra Quay at Aberdeen Harbour Scotland this evening Thursday 21st June 2018, I passed this beauty, swiftly parking my car I hoped to chat with the driver and gain permission to capture a few shots, I could see the cab curtain drawn with no sign of anyone in the cab , hence I snapped away, posting a few of the better shots I managed to take .

  

Ian S Roger Transport - History

 

Three generations of Ian S Roger's family has been involved in the livestock haulage business and the next generation is waiting in the wings to get going if they so desire. Ian S Roger was born at Newton of Forgie in 1943 and has lived there all his life. His father John was a cattle dealer and after leaving school, Ian attended all the local markets with him and developed a great interest in the attendant transporting floats. The arrival of a 3- ton, petrol driven Austin lorry with a Clark and Sutherland wooden body for own account operations at the family farm in 1960, saw Ian S Roger achieve his ambition in driving.

 

Just like today, back then a livestock truck body was a considerable investment for any business, so the next truck to arrive, a 1962 BMC Diesel, reused the same well cared for wooden float. The BMC lasted six years and gave way to an 8-ton Commer, complete with a varnished cedar wood float with sheep decks.

 

In 1969, Ian married Rachel who shared the same level of enthusiasm for livestock and haulage as Ian and in 1975 the business name of Ian S Roger first appeared on the side of a lorry, after Ian's father decided to retire.In the same year the new company purchased a one-year old Volvo F86 6- wheeler, which was a technologically advanced motor for its time. One factor that makes the Ian S Roger fleet of vehicles so recognizable is the colour scheme which is truly unique and currently there's no other haulier in Britain that uses their base hue of Rover Sand paint which is an old British Leyland colour.

 

In addition to bringing up two sons, Graeme and Colin born in 1970 and 1972 respectively, Ian and Rachel dedicated every waking minute to running the farm and haulage business. Their hard graft began to pay dividends when gradual expansion occurrerd towards the end of the decade. In 1981, not long after the death of his father, Ian purchased his first articulated combination and that year also witnessed the arrival of the then new aluminium built floats with folding sheep decks. The frequent cleaning of the livestock containers also moved forward by leaps and bounds, as the acquisition of more modern pressure washers made the drivers' lives somewhat easier.

 

In addtion to the expanding livestock requirements, general haulage work was also on the increase and always up for a challenge the Ian S Roger trucks began appearing further and wider across the UK than ever before. By the end of the 1980s, Ian and Rachel actively gave up farming at Newton of Forgie to concentrate exculsively on road transport. From that point onwards the farm's 150 acres would be annually acutioned off for grazing to produce good land management and this useful practice still continues today.

 

After serving engineering apprenticeships in nearby Elgin, sons Graeme and Colin officially joined the family firm in 1991 and 1992 respectively, to help with the ever-growing levels of work, although as boys from an early age, both had shown a remarkable interest in the family's work and most of their free time was spent enthusiastically supporting their parents.

 

The family take their business roles seriously, but always have time for a wee bit of good natured banter along the way. The healthly mix of responsibility and enjoyment is perhaps the secret of how all four individuals work so well together and they are quick to point out that there are no official job titles used - it's all about teamwork to get the job done properly. In the workshop there is one full time mechanic assisted by an apprentice and around 15 drivers but peaks in workloads often see seasonal staff employed. All the staff live relatively locally and there's always a waiting list for any any vacancies.

 

The Newton of Forgie farm depot was extended in 2006 and a new wash area and office were added. Most of the vehicles are kept at another depot in Aultmore, where there's plenty of room for HGV parking.

 

Some years ago, Corgi ,the diecast model makers, approached the Roger Family and asked if they could make a model of one of their tractor units with a livestock trailer. The family readily agreed and the chosen unit was a 2003 Foden Alpha with a Houghton Parkhouse 2/4 deck livestock trailer, scale 1:50. It is now much sought after by collectors because Foden ceased production in 2005 and livestock trailers are much less common than other articulated trailers.

Explore page.

 

My Japanese maples are a joy to behold in any season. These colors are unaltered. Samaras are the fruit of all maple trees, and their shape allows the wind to carry them. In flight they look like little helicopters. Each part of these double samaras is between half and three-quarters of an inch long.

 

Weekends for me are for work, too, so thanks very much for visiting. I'll try to reciprocate as I can. I'm making inroads but still have a huge workload.

 

Blogged at charliebrown8989.blogspot.

 

© All rights reserved. No usage allowed in any form without the written consent of Mim Eisenberg.

Medical researches from the University of Manitoba found that sub zero temperatures are linked to an increased risk of heart attack. Analyzing 1,487 adults diagnosed with acute myocardial infarction (MI) in Winnipeg from July 2008 to December 2013 correlating MI with local snowfall and temperature records from Environment Canada database. The strongest predictor of acute MI (27% increased risk) was a daily high of less than 0 degree celcius. With every drop of 1 degree celcius the risk goes up .8% demonstrating a clear linear trend. However snowfall had no independent association with MI risk.

Historical evidence of the effects of cold weather on the incidence of MI dates back to Hippocrates in 430 BC. Factors influenced by cold temperatures include cardiac workload, coronary resistance, blood pressure and cholesterol.

Having worked the Cumbrian Mountaineer special to Carlisle via the Settle & Carlisle, preserved BR Standard Class 7 number 70000 'Britannia' is seen moving with its support coach around the complicated trackwork south of Carlisle station prior to being serviced.

 

One of the last and most powerful steam locomotives ever built, the British Rail Standard Class 7 was BR's top express locomotive, and could have been utilised far better in its short lifespan, but ended up only serving the railways for 15 years, a blink of an eye compared to other mainline Pacifics of the time that had operated under the pre-nationalisation companies.

 

Designed by Robert Riddles, who had previously coined the design for the War Department Austerity 2-10-0 and 2-8-0 freight locomotives, the BR Standard Class 7's were conceived of as a result of the 1948 locomotive exchanges, which were done to test the best and worst aspects of locomotive design within the Big Four railway companies that had existed before nationalisation. The research gained from operating the best designs of the GWR, LMS, LNER and Southern railways on different areas of the British Railways network paved the way for several new classes of standardised locomotives to be constructed, largely to replace many of the ageing Victorian era engines that even in the late 1940's continued to ply their merry trade.

 

The first design requested by the Railway Executive was for a new express passenger Pacific locomotive, designed specifically to reduce maintenance and using the latest available innovations in steam technology from home and abroad. Various labour-saving devices were utilised to produce a simple, standard and effective design, able to produce equivalent power to some of the Pacifics that were still available as legacies of the Big Four.

 

The basic design of the Standard 7's can be traced to LMS construction practices, largely owed to Riddles' previous career with that company, but complimented this with the boiler and trailing wheel design of the Southern Railway's Merchant Navy Pacifics so as to follow the best design practice. The firebox was also similar in having a rocking grate, which allowed the fire to be rebuilt without stopping the locomotive, removing both ash and clinker on the move. A self-cleaning smokebox was used, which enabled ash to flow into the atmosphere, reducing the workload of the engine cleaner at the end of a working day. A single chimney was placed on top of the smokebox, which was unusual for a Pacific type of locomotive.

 

The Standard 7's were fitted with 6 ft 2 in driving wheels, allowing these engines greater capacity for use in mixed-traffic working, which made them available for both sustained fast running with heavy passenger trains, yet small enough to allow them to undertake more mundane tasks such as freight haulage.

 

55 of these engines were constructed between 1951 and 1954, with 70000 'Britannia' being the first and flagship of the fleet, with residual locomotives of the class being dubbed 'Britannia-Class'. Three batches were constructed at Crewe Works, before the publication of the 1955 Modernisation Plan.

 

Britannia was built at Crewe, completed on 2 January 1951. She was the first British Railways standard locomotive to be built and the first of 55 locomotives of the Britannia class. The locomotive was named at a ceremony at Marylebone Station by the then Minister for Transport Alfred Barnes on 30 January 1951. The BR Locomotive Naming Committee were determined not to use names already in use on other locomotives. They tried to observe this by not selecting the name Britannia for use on 70000 because it was already in use on one of the ex-LMS Jubilee Class locomotives, but Robert Riddles overruled them and the Jubilee had to be renamed.

 

The Britannias took their names from great Britons, former Star Class locomotives, and Scottish firths, although one locomotive, 70047, was never named. The success of these first Standard Pacifics gave birth to two other Pacific classes over the BR years, including the unique BR Standard Class 8, number 71000 'Duke of Gloucester', which was built in 1954 to replace the destroyed Princess Royal Class locomotive number 46202 Princess Anne, lost in the Harrow and Wealdstone rail disaster of 1952, and the fleet of 10 BR Standard Class 6 'Clan' Pacifics that were employed on services in the west of Scotland, but failed to gain a stellar reputation due to their employment on timetables for the more powerful Standard 7's they couldn't keep up to.

 

The class gained a warm response from locomotive crews across all British Railway Regions, with especially glowing reports from those operating them from Stratford depot on the Eastern Region, where its lower weight and high power transformed motive power over the restricted East Anglian lines. However, negative feedback was received from various operating departments, most notably on the Western Region. The criticism was primarily out of partisan preference for GWR-designed locomotive stock among Western Region staff; in particular, the class was 'left-hand drive' in contrast to 'right-hand drive' GWR locomotive and signalling practice, a factor in the Milton rail crash of 1955.

 

For this reason, the Western Region locomotive depots at Old Oak Common and Plymouth Laira declared that the class was surplus to requirements. However Cardiff Canton depot displayed its liking for the class (despite being part of the former GWR empire) and managed to obtain good results on South Wales passenger traffic.

 

The Midland Region also had favourable reports, but a marked consistency in losing time on the longer runs between Holyhead and Euston was recorded, although all complaints were down to the individual techniques of the operating crews. This was compounded by the irregular allocation of the class to depots all over the network, meaning that few crews ever had a great deal of experience in driving them. The Southern Region also had an allocation of seven in May 1953, when all Merchant Navy Class locomotives were temporarily withdrawn for inspection after 35020 "Bibby Line" sheared a crank axle on the central driving wheel.

 

Repairs to the class were undertaken at Crewe, Swindon and Doncaster Works until the financial constraints of the British Railways Modernisation Plan in terms of expenditure on steam began to preclude the regular overhaul of locomotives. During the mid-1960s overhauls were carried out exclusively at Crewe Works.

 

Britannia was initially based at Stratford in order to work East Anglian expresses to Norwich and Great Yarmouth, but was also particularly associated with the Hook Continental boat train to Harwich. Subsequently, the loco was based at Norwich Thorpe in January and March 1959 before spending the remainder of her career on the London Midland Region based at Willesden, Crewe North, Crewe South and finally Newton Heath.

 

The locomotive also had the distinction of hauling the funeral train for King George VI from King's Lynn, Norfolk to London following his death in February 1952 at Sandringham House, Norfolk. For this task, Britannia had her cab roof painted white, as was the custom with royal locomotives. Britannia has also worn the white roof in preservation.

 

However, as the locomotives entered the 1960's, the modernisation plan continued to gather pace, and diesel locomotives started to replace steam on most parts of the network. Very soon the Standard 7's placement on Top-Line expresses were demoted to the on-again-off-again work of freight and parcels, and cosmetic maintenance was reduced as their final years loomed. The lavish BR Brunswick Green soon faded to grey, and in some cases BR Lined Black was adopted for ease.

 

The first locomotive to be withdrawn from service was number 70007 Coeur-de-Lion in 1965, and the entire class was gradually transferred to Carlisle Kingmoor and Glasgow Polmadie depots. Britannia was withdrawn in May 1966, after 15 years of service.

 

A succession of bulk withdrawals began in 1967, culminating in the very last steam operation in British Railways service on August 11th, 1968, where Standard 7 number 70013 Oliver Cromwell, was chosen to assist in hauling the Fifteen Guinea Special, the last steam hauled British Railways passenger service from Liverpool to Carlisle via the S&C. 70013 was chosen as it was the last the last BR-owned steam locomotive to undergo routine heavy overhaul at Crewe Works, being out-shopped after a special ceremony in February 1967. The engine hauled the Manchester to Carlisle leg of the service via the Settle and Carlisle line, with LMS Class 5 45110, and LMS Stanier Class 5 locomotives, 44781 and 44871 double-heading the return working back to Manchester.

 

Upon withdrawal, 70000 was initially planned for preservation with the National Railway Museum due to it's cultural significance, but because of its prototypical nature, 70013 was instead chosen and bought up for preservation. 70000 would later be preserved by Britannia Locomotive Company Ltd.

 

After moving from one home to another, the engine wound up on the Severn Valley Railway, where she remained for a number of years in operational but non-mainline condition. With the society wishing to make more use of the locomotive, she was moved to the European gauge Nene Valley Railway in Peterborough, where she was also fitted with an air-brake compressor. Britannia made her return to the main line on 27 July 1991, successfully working enthusiast trips until 1997.

 

With an expired mainline boiler certificate, due to the high cost of refurbishment, the locomotive was sold to Pete Waterman in 2000. Stored at Waterman's workshops at the Crewe Heritage Centre, after initial assessment the amount of work resulted in Waterman selling her to Jeremy Hosking. The locomotive underwent restoration at Crewe which involved a newly refurbished cab, a new smoke box and major work on the boiler; replacement steel sides, new crown stays, new front section barrel section, new steel and copper tubeplate, repairs and patches to door plate and major work to copper firebox.

 

Transferred to the Royal Scot Locomotive and General Trust, the locomotive was returned to main line operational condition in 2011, initially out shopped in its prototype black British Railways livery. After a running-in period, in 2012 the locomotive was repainted in British Railways Brunswick Green, but with an early BR crest. On 24 January 2012, the loco hauled the Royal Train with Prince Charles on board to Wakefield Kirkgate, where he rededicated the locomotive. For the trip the loco again had a painted white cab roof, removed after the engine's appearance at the West Somerset Railway's Spring Gala.

Taken on Kodak Ektachrome with a Pentax ME Super. Slide scanned on Epson V550.

 

A classic aircraft. The Grumman A-6 Intruder is a twinjet all-weather attack aircraft developed and manufactured by Grumman Aerospace.

 

The A-6 was developed during the late 1950s and early 1960s in response to a requirement issued by the United States Navy for an all-weather jet-powered carrier-based attack aircraft. Operated by a crew of two in a side-by-side seating configuration, the workload was divided between the pilot and weapons officer. In addition to conventional munitions, the type was also compatible with the Navy's air-based nuclear weapons, which were deployable via a toss bombing techniques. The A-6 was in service with the United States Navy and Marine Corps between 1963 and 1997.

 

This particular aircraft was destroyed on October 18, 1983, when it crashed during a training bombing run, at Marine Corps Air Station Yuma, Arizona. Both crew thankfully, ejected safely.

Steetley Pier

Landmark In Hartlepool, County Durham

 

A 2,000 foot long pier built in the 1960's to pipe sea water for the magnesia treatment works.

 

Steetley Pier is just off the North Sands near Hartlepool and was built in the 1960's to pipe sea water for the magnesia treatment works.

 

As demand grew, Steetley Pier was built in the 1960's to pump salty sea water into large round water holding tanks. By reacting Dolomite with the salty sea water, magnesia was produced, Dah da!

 

Steetley became the biggest plant of this nature in the world. Business continued under a few different companies such as Steeley Magesia, Pallister Works and Redland Magnesia until the works closed in 2005 after a couple of takeovers, one can surmise due to the decline of the Steel industries.

 

This 2,000 foot long pier was not built for perambulation. The pier was probably made from pitch pine and like any wood or concrete it suffers from the effects of the sea. There is a fisherman's forum where someone suggests parts of the pier are being washed away and landed on a beach further along the coast.

 

Despite the decay, this did not stop people accessing it to walk on. Some liked to go fishing. One fisherman refers to how he would hide from the security guide, and then catch huge amounts of cod off the end of the pier. After it became redundant in 2005 a section was removed to stop people walking or fishing as there are holes which (in the dark) people can and did fall through!

 

In the 1930s, industrial works alongside this part of the coastline, extracted magnesia (magnesium carbonate), used in the lining of kilns and incinerators, from dolomitic lime and seawater. Today, all that remains of this industrial site are some derelict buildings, old pipes and the dangerous, magnificent remains of Steetley Pier, a long, derelict structure, which stretches out into the sea here.

 

In the 1930s, industrial works alongside this part of the coastline, extracted magnesia (magnesium carbonate), used in the lining of kilns and incinerators, from dolomitic lime and seawater. Today, all that remains of this industrial site are some derelict buildings, old pipes and the dangerous, magnificent remains of Steetley Pier, a long, derelict structure, which stretches out into the sea here.

 

To get the most from this beach, check tidal tables and time your visit to coincide with low tide, when a vast amount of golden sand, interspersed with pipes is exposed. The beach is often deserted, and has no restrictions on dog walking.

 

The sands can be accessed by parking at West View Road and walking through the tunnel which passes under the railway line. Then walk towards the sea, past the former industrial buildings, and turn right, towards the old pier. The beach is backed by a cemetery and further north, by Hartlepool Golf Course, beyond which lies the Durham Coast Nature Reserve. Hartlepool Marina lies to the south of the beach.

 

There is a fish and chip shop nearby, and more places to eat and shops can be found in Hartlepool.

 

Hartlepool is a seaside and port town in County Durham, England. It is governed by a unitary authority borough named after the town. The borough is part of the devolved Tees Valley area. With an estimated population of 87,995, it is the second-largest settlement (after Darlington) in County Durham.

 

The old town was founded in the 7th century, around the monastery of Hartlepool Abbey on a headland. As the village grew into a town in the Middle Ages, its harbour served as the County Palatine of Durham's official port. The new town of West Hartlepool was created in 1835 after a new port was built and railway links from the South Durham coal fields (to the west) and from Stockton-on-Tees (to the south) were created. A parliamentary constituency covering both the old town and West Hartlepool was created in 1867 called The Hartlepools. The two towns were formally merged into a single borough called Hartlepool in 1967. Following the merger, the name of the constituency was changed from The Hartlepools to just Hartlepool in 1974. The modern town centre and main railway station are both at what was West Hartlepool; the old town is now generally known as the Headland.

 

Industrialisation in northern England and the start of a shipbuilding industry in the later part of the 19th century meant it was a target for the Imperial German Navy at the beginning of the First World War. A bombardment of 1,150 shells on 16 December 1914 resulted in the death of 117 people in the town. A severe decline in heavy industries and shipbuilding following the Second World War caused periods of high unemployment until the 1990s when major investment projects and the redevelopment of the docks area into a marina saw a rise in the town's prospects. The town also has a seaside resort called Seaton Carew.

 

The place name derives from Old English heort ("hart"), referring to stags seen, and pōl (pool), a pool of drinking water which they were known to use. Records of the place-name from early sources confirm this:

 

649: Heretu, or Hereteu.

1017: Herterpol, or Hertelpolle.

1182: Hierdepol.

 

A Northumbrian settlement developed in the 7th century around an abbey founded in 640 by Saint Aidan (an Irish and Christian priest) upon a headland overlooking a natural harbour and the North Sea. The monastery became powerful under St Hilda, who served as its abbess from 649 to 657. The 8th-century Northumbrian chronicler Bede referred to the spot on which today's town is sited as "the place where deer come to drink", and in this period the Headland was named by the Angles as Heruteu (Stag Island). Archaeological evidence has been found below the current high tide mark that indicates that an ancient post-glacial forest by the sea existed in the area at the time.

 

The Abbey fell into decline in the early 8th century, and it was probably destroyed during a sea raid by Vikings on the settlement in the 9th century. In March 2000, the archaeological investigation television programme Time Team located the foundations of the lost monastery in the grounds of St Hilda's Church. In the early 11th century, the name had evolved into Herterpol.

 

Normans and for centuries known as the Jewel of Herterpol.

During the Norman Conquest, the De Brus family gained over-lordship of the land surrounding Hartlepool. William the Conqueror subsequently ordered the construction of Durham Castle, and the villages under their rule were mentioned in records in 1153 when Robert de Brus, 1st Lord of Annandale became Lord of Hartness. The town's first charter was received before 1185, for which it gained its first mayor, an annual two-week fair and a weekly market. The Norman Conquest affected the settlement's name to form the Middle English Hart-le-pool ("The Pool of the Stags").

 

By the Middle Ages, Hartlepool was growing into an important (though still small) market town. One of the reasons for its escalating wealth was that its harbour was serving as the official port of the County Palatine of Durham. The main industry of the town at this time was fishing, and Hartlepool in this period established itself as one of the primary ports upon England's Eastern coast.

 

In 1306, Robert the Bruce was crowned King of Scotland, and became the last Lord of Hartness. Angered, King Edward I confiscated the title to Hartlepool, and began to improve the town's military defences in expectation of war. In 1315, before they were completed, a Scottish army under Sir James Douglas attacked, captured and looted the town.

 

In the late 15th century, a pier was constructed to assist in the harbour's workload.

 

Hartlepool was once again militarily occupied by a Scottish incursion, this time in alliance with the Parliamentary Army during the English Civil War, which after 18 months was relieved by an English Parliamentarian garrison.

 

In 1795, Hartlepool artillery emplacements and defences were constructed in the town as a defensive measure against the threat of French attack from seaborne Napoleonic forces. During the Crimean War, two coastal batteries were constructed close together in the town to guard against the threat of seaborne attacks from the Imperial Russian Navy. They were entitled the Lighthouse Battery (1855) and the Heugh Battery (1859).

LNER A2 Peppercorn Pacific 60523 'Blue Peter', Carlisle Railway Station, April 1992.

 

At the moment, I have a very heavy workload, so my fellwalking's had to take a back seat. This gives me a little bit of time to have a look through my archives and scan in a few shots I feel are worth sharing here. Most of my early work is with the Railways. I found it an excellent means with which to 'cut my teeth', so to speak..

 

Looking forward to resuming my walking though....

  

Some workloads without a heatsink on the cpu. Managing this test was not as easy as the older AMD Ryzen Renoir APU Tests, because the Rocketlake design is not very well optimized for such low power consumption. In Multithreading workloads it was pretty hard to prevent the system from a emergency shutdowns. At stock settings the chip was not able to run for a longer time without any cooler. With reduced VCCSA (Offset -200mV), lower memory clocks, disabled Hyperthreading, AVX, and iGPU, the cpu was able to run single thread workloads with dynamic clocks for an undetermined time. :-)

 

With fixed clocks at 800MHz it was also possible to run multithreaded workloads. The problem was the homogeneous heat emission at 800Mhz so there was no glow for the core visible. Intel's opaque silicon complicated these tests...

  

ASRock Z590 Phantom Gaming 4 (Biosversion 1.30)

Intel Core i5-11400

 

-Hyperthreading off

-iGPU off

-AVX off

-VCCSA offset -0.200mV

-DDR4 1333 (dualchannel)

  

00:00:26 # core position via thermal cam

00:01:07 # Cinebench R15 (running singlebench)

00:01:45 # Cinebench R15 (results)

00:02:23 # bonus

  

Music:

 

King Porter Stomp - Joel Cummins

This tan color will be release on Nov becoz I am busy on my day time work, sorry, I am always try to do everything in time, pack up the kits, ship out the kits...etc....

Not the excuse but it is really crazy to a man who just married, start a new job & have a new apartment....tons of workload...help!!!!!

Ewha Womans University, Seoul, South Korea

 

+1' Anniversary

+2' Anniversary

+3' Anniversary

+4' Anniversary

+5' Anniversary

+6' Anniversary

+7' Anniversary

+8' Anniversary

+9' Anniversary

+10' Anniversary

+11' Anniversary

+12' Anniversary

 

This year is the year we have a painful lesson we all need to absorb, it doesn't wait until you're ready, when the time has come, it will come whether we like it or not. I've been making a promise to myself, life after passed forties, I will re-prioritize my personal and work-related, especially when comes to health is always on top of the list. And yet I still failed to do so, and the number of workouts become less and lesser. Whenever the brain freezes moment strikes, basically there is nothing we can do, my brain can only take this much of load, anything beyond my limit will not be productive.

 

According to our tradition, every year we will have at least one oversea trip not only to allow ourselves to get away from the hectic workload but taking the opportunity to achieve our annual project. In the past, we would have 2 at the very minimum for outdoor shooting, be it oversea or local (staycation). Looking now, we realized that it had been 1 year since we didn't do the photo-shooting. The last round was the 2021 Chinese New Year, as the travel still somewhat with plenty and complicated rules, we forgo the thought and make it into the next year's plan.

 

We did actually plan for the September trip this year, even though I have secured the destination. Nearly placed my credit card number in Agoda, booking dot com, and other hotel reservation platforms. We were hit with sudden bad news, and all of us needed to prepare for the worst, our plan became on hold, and eventually have to cancel due to other priorities landing first. It basically overrides everyone's plan, dropped everything we have including everyone's personal and work-related to rush whatever we could to accommodate the highest priority at that very moment.

 

While aging is catching up, we can definitely feel the lack of physicality to achieve what we have been doing all these years. Having thoughts in mind and putting all stages and phases into reality ain't easy. It felt easy when we were younger back then, especially carrying backpack, tripod, and looking for spots for shooting, all these are consuming much physical energy. I am not certain how long we can do this, even if we have strong willpower, sometimes physically we have to let go, as in having lesser places to visit in a day, driving could be one of the major factors to contribute fatigue throughout the trip.

 

Couldn't believe I've been doing this for 13 years, not only dedicated to writing, photo shooting, and post-processing for every single photo I've done this far, this habit has been developed since I was very young, frankly, I've lost count when I started this. I do hope this annual project could last as long as it could, I deeply know when age rolled by, the amount of effort and hard work have to depend on physical fitness. Or maybe we need to start building our base, and when the time has come we at least can sustain the places we planned in a day, not keep reducing and come back next year or two.

 

Last but not least, a message to wifey. "I've never been bothered by secular customary, all I care about is the time we spent together in the process of memory-making. Record down what we do so that in the distant future when we look at it again, it will trigger the sweet and of course the bitter experience we have been through together. Life is fragile, if possible, I wanted to do things spontaneously rather than follow the draft or plan on a piece of paper, cause we never know what comes next our way, and I don't want to be regretted. Happy 13th-anniversary wifey..."

  

P/S: This was our second visit to the same place back in 2017 because we couldn't finish in the first round, since we stayed in Seoul for a few days, might as well explore the rest of the area.

 

----

#d3s #nikon #wefie #nikoncontest #festiveseason #nikkor50mmf14 #wefiephotography #nikonphotography #anniversaryshot #ewhawomansuniversity

Preston Corporation was notable for continuing to buy 7ft6in wide buses, long after most other operators had taken advantage of the extra 6in of width permitted in 1950. KRN419 was one such example, a Leyland Titan PD2/10 bought in 1957 and fitted with a late Crossley H33/29R body to Park Royal design. It was photographed in Preston Bus Station in August 1972. Whether these buses were bodied in Stockport because of their, by then, non-standard width, as a result of Park Royal spreading its workload, or to satisfy political requirements to "buy local", I do not know.

Scanned from a Kodachrome 64 slide. This BAC 1-11 was acquired by the Blind Landing Experimental Unit (BLEU) at RAE Bedford as a replacement aircraft for the ageing Comets (XP915 and XV144), being more representative of the type of aircraft in service with airlines at that time.

 

It was the 4th aircraft off the 200 series production line, and survived an accident on Salisbury plain while investigating the aerodynamic condition known as a deep-stall. After being re-built, it entered airline service with British United Airways in 1964 as G-ASJD. It was purchased from British Caledonian in 1971 and became XX105 on the military register. There followed a period of overhaul and re-painting at BAC Hurn, and an extensive re-fit as a “flying laboratory” at the Cranfield Institute of Technology (CIT) and then in-house at RAE Bedford.

 

She was modified to allow the spoilers to be used for direct lift control and fitted with a Smiths SEP5 autopilot to provide a 'CAT 2' all-weather capability. XX105 took on a new red, yellow and white colour scheme, chosen within BLEU, which became well recognised by aviation enthusiasts throughout much of the world, and in spite of much pressure from RAE top brass to change to the official “raspberry ripple” colours; this unique livery was retained for the rest of its life.

 

Early projects centred on the active control/fly-by-wire systems which would feature in future generations of passenger aircraft. Direct Lift Control, Relaxed Static Stability, Energy-based Control Laws and Steep/Two Segment Approach techniques for noise reduction were investigated with the aid of a programmable analogue computer that could be coupled into the automatic pilot system.

 

By the mid 1970s BLEU had become “Flight Systems 2” Department of RAE, and XX105 became the project aircraft for the Civil Avionics Section. The 1-11 research programme was supported by the MoD, the Department of Trade & Industry and the Civil Aviation Authority. The work was carried out in conjunction with many UK avionic companies and also with Eurocontrol and the European Commission. Projects included an evaluation of a Ground Proximity Warning System (GPWS), which was about to become a mandatory fit for all passenger carrying aircraft, and investigations into the role of Head Up Displays in civil aviation.

 

By the late 1970s/early 1980s an improved range of digital navigation aids had been installed in the aircraft together with a Flight Management System (FMS) to exploit the improved accuracy, and to investigate the potential reduction in pilot workload. Navigational accuracy measurements using different combinations of ground and airborne sensors were made using tracking radars at Aberporth. These results were used to define the ICAO required navigational performance for civil aircraft. An Electronic Flight Instrument System (EFIS) further enhanced the aircraft’s capabilities and made it ideally suitable for a wide range of European Air Traffic Management (ATM) research projects supported by Eurocontrol and the European Commission, which eventually became the main task.

 

The capabilities of the FMS were developed to include 4D Time Slot Following, integrated air/ground Air Traffic Management and curved approaches using Microwave Landing System (MLS) guidance. Navigational accuracy was further improved by utilising Satellite signals from the US Global Navigation System (GPS) and the Russian equivalent (GLONASS). The EFIS Navigation Display was developed to include a map presentation with both horizontal and vertical options showing aircraft position and progress relative to the 4D clearance negotiated with ATC over a Data Link, and a Taxi Mode showing all runways, taxiways and stands. A Direct Voice Input (DVI) capability was developed to investigate performance and potential benefits when used in the cockpit. The FMS, EFIS, Data Link and DVI systems were integrated to provide a low workload environment for the crew when negotiating and flying the ATC 4D clearance.

 

A wide range of independent projects were tested during the ATM flights. These included investigating the performance of Mode-S, UHF, VHF and HF Data Link communication systems in a variety of operational environments, testing improved fuel gauging systems and calibrating atmospheric sensors in conjunction with the Meteorological Office.

 

Flight demonstrations were an essential part of the work, and XX105 was renowned for always being serviceable at the scheduled time, even if the pilots and scientists sometimes had to hide experimental system failures.

 

Flight trials were required in a large variety of conditions and geographic locations. These included hot and cold weather, involving detachments to the Mediterranean, Greenland and Svalbard (flying as near to the North Pole as the fuel load permitted). Navigation and Flight Management System development required operation throughout most of Europe, as did demonstrations of the EFIS system, which also required a month’s tour of the USA in 1981, with an intensive schedule of demonstrations to aircraft manufacturers, airlines and aviation regulators. Needless to say, the aircraft remained serviceable throughout the tour.

 

With the closure of RAE Bedford Airfield in 1994 XX105 was transferred to Boscombe Down where it continued similar work until its last flight in 2003.

 

XX105 was rightly recognised as the most capable, flexible and reliable flying laboratory in Europe, and probably second to none in the world. She was operated at RAE Bedford from 26th March 1973 until February 1994, and then at Boscombe Down until 2003, and will be remembered with great affection by all the pilots and scientists who flew in her, and by all the engineers who looked after her with such skill and dedication.

 

The days before Christmas 2012 saw this renowned aircraft broken up and removed from Boscombe Down in skips - a sad end to a 30 year career at the forefront of avionics research.

40 hours later, The Forge is finally finished! So, what is The Forge? The Forge is a mobile asteroid mining and processing facility. It uses six tugs to collect asteroids and bring them to one of the six mining platforms near the front of the ship. The asteroids are then put through grinding drums that break them into smaller pieces. Next, any desired ore, minerals, etc. are removed from the fragments and the waste is jettisoned from the ship. The ore, minerals, etc. are sorted into seperate containers. Eight huge reinforced plates protect the shipping containers from rogue asteroids and open to allow a transport to collect them.

 

The two bridges share the workload of the ship. The rear bridge is in charge of piloting, navigation and shipping. The forward bridge handles the mining and processing operations.

 

Alright, time for some tech specs!

 

The forge measures in at a whopping 156 studs in length (The biggest SHIP I've ever built). She's 62 studs at the widest (26 at the thinnest) and 38 studs tall. I did have two big landing gears built into it but it got WAY too heavy for them, thus the stand. It also has motor-driven grinding drums in the mining platforms and the big grey button in the middle of the ship opens and closes the armored plates. The plates where also supposed to be motor-driven but I could get them working for the life of me. Oh well!

 

I hope you all enjoyed watching this beast going together as I had building it (even if I did shout some horrific profanities from time to time)! Thanks for watching and for all the support!

It's been nearly a month since I last posted anything, including progress on ongoing projects, and photos. I have been working on both of those things, but I haven't had the time to post any of them! The 645PS project (which will probably be it's name, since I am not so imaginative) is going well, I'm waiting on the laser-cut parts, which will allow me to build the shutter assembly. If that works well, then the rest of the project, including 3D printing the camera itself, will proceed. Took quite a few photos lately too, but there's quite a backlog to be scanned :(

 

To add to my workload (beyond all the Ph.D...), I'm working on a couple of cameras which are - shall we put it - "new old stock." Old and extraneous Duo cameras which never sold through the Kickstarter campaign, for a variety of reasons. The main one being that some never entered their shipping addresses, or never sent me lenses or Polaroid backs to complete their cameras (despite numerous attempts to reach out to them)- and now over two years after the fact, I think it's fair to say that they've abandoned their investment - to others' potential benefit.

 

At this point I want to apologize to people who I told that I had "no more" of these camera kits. This was true, in a way - they were unfinished, without the necessary beveling and routing, misc. hardware, etc - and I had no time (or incentive, to tell the truth) to finish them for sale, thanks to my move from Portland to Seattle and beginning graduate school. I assumed that I would keep them for a rainy day, sell a few after the demand for the 105mm lenses died down - and here we are. I'm hoping to sell a couple of these to finance a honeymoon (when we got married this past May, we didn't have the time nor funds for one - being students in an expensive city, etc., etc.).

 

Anyway, these will probably be done in Q1 of 2016. I don't have the time to work on these 24/7 like I used to :( They'll be shipped "ready-to-shoot," meaning they'll include a Polaroid back and a 105mm lens pair. One will come with a roll film back, and an extra mounting bracket for a second Polaroid back, if you like that sort of thing.

 

Send me a message or an email if this is anything of interest to you!

Stumbled upon this bunch of 'projects' in Livinhac-le-Haut. Some pictures from years ago can be found of some of these cars in a better shape. It seems the workload has grown over the owner's head.

Dear Flickr friends,

 

I'm not going to be on Flickr much for a while. My eyes are much better, thankfully, but now there's another problem. I've got a huge workload, and my computer and Word have been crashing all week. I've spent untold hours with my guru and with Microsoft support, and they can't seem to fix it, and since I MUST have Word working perfectly in order for me to earn money, I'm quite exasperated. I've got in house about 120 work hours of interviews to transcribe, and I can only work about a half hour at a time before Word crashes and I must spend 15 minutes or so doing what I must do to get it working again for another little while. Imagine my frustration!

 

At any rate, work must take preference over Flickr. Though I may post every day or so, I'm definitely not going to have time for viewing and commenting, alas, and am taking a leave of absence from my admin duties in various pools.

 

Though it seems unlikely, I think the Panasonic software had something to do with the crashes because they started immediately upon installation of the software, and since I wasn't all that happy with the camera to begin with, I've uninstalled the software (though that didn't solve the problem with the crashes) and will be returning the camera. Although I really would like a DSLR, I probably have to settle for now on the Canon PowerShot S2 IS. I know Canon doesn't crash my computer, and their phone support is excellent. Stay tuned.

 

Hugs to you all,

Mim

 

EDIT at 1:40 pm: Thanks, actually, to some good service by Microsoft, the problem may be solved! However, I've got a huge work backlog, so I'll still be limiting my Flickr'ing. Sorry I won't be visiting and commenting much for a while. Thank you for your support and compliments. You're a great bunch of people. (((my Flickr friends)))

 

EDIT 2:05 pm: Nope. Back to square one. Phooey.

 

© All rights reserved. No usage allowed in any form without the written consent of Mim Eisenberg.

+++ DISCLAIMER +++

Nothing you see here is real, even though the conversion or the presented background story might be based historical facts. BEWARE!

  

Some background (including material from fellow modeler Devilfish at whatifmodelers.com):

The SEPECAT Cheetah was a more sophisticated variable geometry wing derivative of the Anglo-French Jaguar attack aircraft, similar to the Su-7 and later Su-17/2022 evolution.

 

The Jaguar programme began in the early 1960s, in response to a British requirement for an advanced supersonic jet trainer to replace the Folland Gnat T1 and Hawker Hunter T7, and a French requirement (ECAT or École de Combat et d'Appui Tactique, "Tactical Combat Support Trainer") for a cheap, subsonic dual role trainer and light attack aircraft to replace the Fouga Magister, Lockheed T-33 and Dassault Mystère IV.

 

Cross-channel negotiations led to the formation of SEPECAT (Société Européenne de Production de l'Avion d'École de Combat et d'Appui Tactique – the "European company for the production of a combat trainer and tactical support aircraft") in 1966 as a joint venture between Breguet and the British Aircraft Corporation to produce the airframe.

 

Though based in part on the Breguet Br.121, using the same basic configuration and an innovative French-designed landing gear, the Jaguar as built also incorporated major elements designed by BAC – notably the wing and high lift devices. Production of the aircraft components would be split between Breguet and BAC and these would be assembled on two production lines; one in the UK and one in France.

 

The first of eight prototypes flew on 8 September 1968, a two-seat design fitted with the first production model Adour engine. The second prototype flew in February 1969; a total of three prototypes appeared in flight at the Paris Air Show that year. The first French "A" prototype flew in March 1969. In October a British "S" conducted its first flight.

 

A navalized "M" prototype flew in November 1969. The "M" had a strengthened airframe, an arrester hook and different undercarriage: twin nose wheel and single mainwheels. After testing in France it went to RAE at Thurleigh for carrier landing trials from their land based catapult. In July 1970 it made real take offs and landings from the French carrier Clemenceau.

 

The RAF accepted delivery of the first of 165 single-seat Jaguar GR1s (the service designation of the Jaguar S) in 1974, and it remained in service until 2007. Anyway, the Jaguar's all-weather capacity was limited and the airframe still offered development potential, so that from 1976 on the Anglo-French SEPECAT consortium looked at improved versions with radar, more powerful engines and improved avionics and aerodynamics.

 

This led in late 1975 to the Cheetah project, which incorporated a variable geometry wing that could be mounted to the Jaguar's airframe without major structural modifications.

 

The Cheetah was designed as a multirole, twin-engined aircraft designed to excel at low-level penetration of enemy defences, but also for battlefield reconnaissance and maritime patrol duties, and both naval and land-based versions were developed.

 

The Cheetah’s primary mission envisaged during the Cold War was the delivery of conventional and nuclear ordnance on the invading forces of the Warsaw Pact countries of Eastern Europe. Advanced navigation and flight computers, including the then-innovative fly-by-wire system, greatly reduced the workload of the pilot during low-level flight and eased control of the aircraft.

 

Compared with the Jaguar, the Cheetah’s nose section was widened to carry an Ericsson PS 37 X-band mono pulse radar, which used a mechanically steered parabolic dish housed in a radome. This radar performed several functions, including air-to-ground telemetry, search, track, terrain-avoidance and cartography. Air-to-air telemetry was also provided. This capability was not the system’s functional focus, but allowed the Cheetah to engage in all weather air-to-air combat and to act as a point defense interceptor with short range AAMs (e. g. up to six AIM-9 Sidewinder).

 

Honeywell provided an automatic digital flight control system for the Cheetah, one of the first such systems in a production aircraft. To assist low altitude flight and navigation, a Honeywell radar altimeter with transmitter and receiver was used, and the aircraft was also fitted with a Decca Type 72 Doppler navigation radar. TILS (Tactical Instrument Landing System), a landing-aid system made by Cutler-Hammer AIL, improved landing accuracy to 30 m.

 

From this basis, the Cheetah’s airframe was adapted to a naval version first, which featured a more rigid structure, a beefed-up landing gear for carrier operations and other suitable modifications. This evolved into the Cheetah FRS.1 for the Royal Navy. The FRS.1 was a separate development from the Jaguar, and catered to a very different specification. By the late 60's the Royal navy knew that their big carriers were due for scrapping and that plans for the proposed CVA 01 carrier were already being shelved. In a desperate attempt to hold on to naval air power, the Admiralty put forward a plan to buy two ex-US Navy Kittyhawk class supercarriers and refit them with British equipment (mostly salvaged from the outgoing carriers, Ark Royal and Eagle).

 

Because of the cancellation of TSR.2, the treasury, in a strange turn of events, agreed that air power at sea was definitively needed. They approved the acquisition of at first one, then later a second US carrier. To supplement them, two Centaur class carriers were to be retrofitted to act as tactical carriers to aid in smaller conflicts.

 

As these were not big enough to carry and deploy the larger American types being used on the supercarriers, a smaller multi-purpose aircraft was needed. With the Cheetah, BAC offered a version of the Jaguar, fitted with the variable geometry wing, then being designed for the MRCA, to aid with slower and shorter take offs and landings. Renamed the Cheetah, the FRS.1 entered service aboard the HMS Hermes in 1978, seeing service during the Falklands conflict in 1982.

 

The land-based Cheetah differed in many details from the naval version, though, the first prototype flew in early 1977 and the RAF’s GR.2 was primarily designed for the RAF Germany forces, since the continental theatre of operations was regarded as the most critical NATO flank of that time. The RAF Cheetahs were supposed to carry out conventional and nuclear point strikes against targets in the GDR, Poland and Czechoslovakia, and defend coastal lines against fast invasion fleets, esp. in the Baltic Sea.

 

The biggest visible difference to the FRS.1 was a different variable wing geometry mechanism and a modified wing shape with a dog tooth close to the pivot section and an extended leading edge fairing at the wing roots. The GR.2’s VG mechanism was more compact than the Tornado structure originally used in the FRS.1, but also simpler in order to save as much weight as possible.

 

The GR.2’s wings could be swept backwards between 16° and 72°, and the horizontal stabilizers were adapted in shape to form a quasi delta wing when the wings were fully swept back, allowing for minimal drag during the critical low-level dash towards a well-prepared enemy. The sweep angle could be altered manually by the pilot, but also automatically. The different VG wings basically improved low altitude aerodynamics and handling of the Cheetah, as well as its STOL capabilities. With its rugged undercarriage, lent from the Jaguar, the Cheetah GR.2 was, more than the bigger and heavier Tornado, suited for tactical front line service from improvised airstrips, together with the RAF’s Harrier fleet.

 

The Cheetah FRS.1 and the GR.2 carried the Jaguar’s pair of 30mm cannon, but due to the different wing structures the hardpoints for external ordnance differed. The Cheetah was typically equipped with a total of seven hardpoints: three underneath the fuselage, and more under the wings. The FRS.1 had four wing pylons which could, thanks to the Tornado ancestry, be swept together with the wings.

The GR.2’s capacity was more limited, as it carried two large tandem pylons under each wing root, each also carrying a launch rail for defensive AAMs, and a further pair of optional wing-mounted, fixed hardpoints. This facility was rarely used, though, and they were basically reserved for drop tanks for ferry flights, but could also take weapon racks. External ordnance capacity was similar to the original Jaguar, with 10,000 lb (4,500 kg).

 

The first Cheetah GR.2 entered RAF service in 1980, and replaced basically the RAF Buccaneers as well as an early part of the Jaguar GR.1 fleet (the Jaguars kept in service were later modernized to GR.3 standard).

 

The RAF Cheetahs served together with the Jaguar Force until 2007, when both types were retired. Following their retirement from flying service, some Cheetahs continue to serve as ground instructional airframes, most notably at RAF Cosford, used in the training of RAF fitters.

  

General characteristics:

Crew: One

Length: 16.83 m (55 ft 2½ in)

Wingspan: 13.97 m (45 ft 10 in) spread 16°, XXX swept 72°

Height: 4.89 m (16 ft 0½ in)

Wing area: 37.35 m² spread, 34.16 m² swept (402.05 ft² / 367.71 ft²)

Empty weight: 7,848 kg (17,286 lb)

Loaded weight: 12,200 kg (26,872 lb)

Max. takeoff weight: 15,700 kg (34,612 lb)

 

Powerplant:

2 × Rolls-Royce/Turbomeca Adour Mk 105 turbofans

with 24.50 kN (5,508 lbf) dry thrust each and 35.5 kN (7,979 lbf) with afterburner

 

Performance:

Maximum speed: Mach 1.8 (1,870 km/h, 1,161 mph) at 11,000 m (36,000 ft)

Mach 1.1 (1,350 km/h, 839 mph) at sea level

Combat radius: 908 km (490 nmi, 564 mi) (lo-lo-lo, external fuel)

Ferry range: 3,524 km (1,902 nmi, 2,190 mi)

Service ceiling: 14,000 m (45,900 ft)

Rate of climb: 200 m/s (39,400 ft/min)

Climb to 9,145 m (30,000 ft): 1 min 30 sec

 

Armament:

2× 30 mm (1.18 in) DEFA cannons in the lower front fuselage, 150 RPG

7 hardpoints; 1× center-line pylon stations Fore & Aft plus a pair of pylons in front of the main landing gear wells; twin inner pylon (Fore & Aft) plus launch rails for AAMs, and single Outer Pylon pair under the wings, non-moveable. Total capacity of 10,000 lb (4,500 kg) for a wide range of guided and unguided ordnance, including:

- Matra rocket pods with 18× SNEB 68 mm rockets each (up to seven at once)

- AS.37 Martel anti-radar missiles

- AS-30L laser guided air-to-ground missiles

- Various unguided or laser-guided bombs of up to 2.000 lb (907 kg) caliber

- 2× WE177A nuclear bombs

- 1× AN-52 nuclear bomb

- ECM protection pods

- Reconnaissance pods

- ATLIS laser/electro-optical targeting pod

- External drop tanks for extended range/loitering time

  

The kit and its assembly:

The final contribution to the “Cold War” Group Build at whatifmodelers.com, and another realization of a plan from the long agenda – and triggered by a similar build at the board from fellow modeler Devilfish who built a naval VG Jaguar with Tornado wings in 1:48. I took the opportunity and inspiration to build my interpretation of that theme, lending the Cheetah designation from Devilfish’s build, though, and some of the naval version’s background.

 

Anyway, my conversion plan had been different. I wanted to create an RAF aircraft, true to the Jaguar’s strike/recce role, and the VG mechanism and wings would come from a MiG-23 – inspired by a similar transplant with a Mirage F.1C I saw many moons ago (and a beautiful result, I want to try that stunt, too!).

I also had the donation kits stashed away: a Heller SEPECAT Jaguar A (actually, I had already piled up four kits for this task…) and an Academy MiG-23S.

 

Wing transplantation went straightforward and with surprisingly little difficulties. The MiG’s wings were cut out together with the spinal section and the lower wing gloves, so that the VG geometry remained unchanged. On the other side, this package went into a shallow gap that I carved out from the Jag’s ventral section. Some putty and body sculpting merged the parts, easier than expected.

 

The rest saw only minor modifications. A radome was implanted (from an Italeri F-18 Hornet), which needed some body sculpting around the nose and the MiG-23’s stabilizers were used, too, in order to form a clean wing shape. I tailored their trailing edges a bit, so that the shape would not remind too much of the MiG heritage.

 

An RAF style radar warning receiver, scratched from 1.5mm styrene, was installed into the French version’ fin. Under the wing roots a pair of pylons from a Matchbox F-14 were added, together with Sidewinder launch rails from a Tornado ADV (Italeri). The jet exhausts were drilled open for more depth, and some sensors/pitots added to the nose, made from wire. Cockpit and landing gear were taken OOB, even though I used a different ejection seat and faired the original dashboard over with a piece of styrene.

 

The BL 755 bombs and their twin racks come OOB from the Heller kit, the Sidewinders from an ESCI kit, IIRC.

  

Painting and markings:

The RAF was settled as an operator, but for a whiffy twist I applied the all-green scheme that the RAF’s Harrier GR.5 carried in the late Eighties – exclusively, AFAIK. While the all NATO Green upper side appears a bit dull, the Lichen Green underside and the very low waterline look rather psychedelic and unique. Anyway, it works well on the Cheetah, and I can imagine that other RAF aircraft would also look cool in this simple scheme?

 

The basic colors I used are Humbrol 105 (Army Green) and 120 (Light Green, FS 34227), both are pretty approximates. The basic paintwork was later panel-shaded with lighter mixes of these two tones – actually brightened up with RAF Cockpit Green (Humbrol 78). In fact, the Heller Jaguar is almost totally devoid of any surface detail... A light black ink wash was also used to emphasize edges and deepen the contrast. The wings’ leading edges were painted in a very dark green (Humbrol 91) and the cockpit interior was painted in dark grey (FS 36076 from Model Master). The landing gear struts were painted light grey, while the wells and covers became Zinc Chromate Yellow.

 

The decals are a mix of the OOB Heller sheet and aftermarket sheets for RAF Jaguars, an Italeri Tornado and a Harrier GR.5. A coat of matt acrylic varnish finally sealed everything and the ordnance was mounted.

  

An interesting conversion, and the result looks very plausible! I am certain that this thing would make people seriously wonder and think when displayed on a convention. The VG Jag looks very natural – but not much sexier than the original? Anyway, the transplantation does not look out of place, because the Jaguar’s layout is very similar to the Panavia Tornado, so that the VG wing does not appear like the total fake it actually is. ^^

From Wikipedia, the free encyclopedia

 

The Panavia Tornado is a family of twin-engine, variable-sweep wing multirole combat aircraft, jointly developed and manufactured by Italy, the United Kingdom, and West Germany. There are three primary Tornado variants: the Tornado IDS (interdictor/strike) fighter-bomber, the suppression of enemy air defences Tornado ECR (electronic combat/reconnaissance) and the Tornado ADV (air defence variant) interceptor aircraft.

 

The Tornado was developed and built by Panavia Aircraft GmbH, a tri-national consortium consisting of British Aerospace (previously British Aircraft Corporation), MBB of West Germany, and Aeritalia of Italy. It first flew on 14 August 1974 and was introduced into service in 1979–1980. Due to its multirole design, it was able to replace several different fleets of aircraft in the adopting air forces. The Royal Saudi Air Force (RSAF) became the only export operator of the Tornado in addition to the three original partner nations. A tri-nation training and evaluation unit operating from RAF Cottesmore, the Tri-National Tornado Training Establishment, maintained a level of international co-operation beyond the production stage.

 

The Tornado was operated by the Royal Air Force (RAF), Italian Air Force, and RSAF during the Gulf War of 1991, in which the Tornado conducted many low-altitude penetrating strike missions. The Tornados of various services were also used in conflicts in the former Yugoslavia during the Bosnian War and Kosovo War, the Iraq War, Libya during the Libyan civil war, as well as smaller roles in Afghanistan, Yemen, and Syria. Including all variants, 992 aircraft were built.

  

Development

 

Origins

 

During the 1960s, aeronautical designers looked to variable-geometry wing designs to gain the manoeuvrability and efficient cruise of straight wings with the speed of swept wing designs. The United Kingdom had cancelled the procurement of the TSR-2 and subsequent F-111K aircraft, and was still looking for a replacement for its Avro Vulcan and Blackburn Buccaneer strike aircraft.[1] Britain and France had initiated the AFVG (Anglo French Variable Geometry) project in 1965, but this had ended with French withdrawal in 1967. Britain continued to develop a variable-geometry aircraft similar to the proposed AFVG, and sought new partners to achieve this.[3] West German EWR had been developing the swing-wing EWR-Fairchild-Hiller A400 AVS Advanced Vertical Strike (which has a similar configuration to the Tornado).

 

In 1968, West Germany, the Netherlands, Belgium, Italy and Canada formed a working group to examine replacements for the Lockheed F-104 Starfighter, initially called the Multi Role Aircraft (MRA), later renamed as the Multi Role Combat Aircraft (MRCA). The participating nations all had ageing fleets that required replacing; but, as the requirements were so diverse, it was decided to develop a single aircraft that could perform a variety of missions that were previously undertaken by a fleet of different aircraft.[ Britain joined the MRCA group in 1968, represented by Air Vice-Marshal Michael Giddings, and a memorandum of agreement was drafted between Britain, West Germany, and Italy in May 1969.

 

By the end of 1968, the prospective purchases from the six countries amounted to 1,500 aircraft. Canada and Belgium had departed before any long-term commitments had been made to the programme; Canada had found the project politically unpalatable; there was a perception in political circles that much of the manufacturing and specifications were focused on Western Europe. France had made a favorable offer to Belgium on the Dassault Mirage 5, which created doubt as to whether the MRCA would be worthwhile from Belgium's operational perspective.

 

Panavia Aircraft GmbH

 

On 26 March 1969, four partner nations – United Kingdom, Germany, Italy and the Netherlands, agreed to form a multinational company, Panavia Aircraft GmbH, to develop and manufacture the MRCA. The project's aim was to produce an aircraft capable of undertaking missions in the tactical strike, reconnaissance, air defence, and maritime roles; thus allowing the MRCA to replace several different aircraft then in use by the partner nations. Various concepts, including alternative fixed-wing and single-engine designs, were studied while defining the aircraft. The Netherlands pulled out of the project in 1970, citing that the aircraft was too complicated and technical for the RNLAF's preferences, which had sought a simpler aircraft with outstanding manoeuvrability. An additional blow was struck by the German requirement reduced from an initial 600 aircraft to 324 in 1972. It has been suggested that Germany deliberately placed an unrealistically high initial order to secure the company headquarters and initial test flight in Germany rather than the UK, so as to have a bigger design influence.

 

When the agreement was finalised, the United Kingdom and West Germany each had a 42.5% stake of the workload, with the remaining 15% going to Italy; this division of the production work was heavily influenced by international political bargaining. The front fuselage and tail assembly was assigned to BAC (now BAE Systems) in the United Kingdom; the centre fuselage to MBB (now EADS) in West Germany; and the wings to Aeritalia (now Alenia Aeronautica) in Italy. Similarly, tri-national worksharing was used for engines, general and avionic equipment. A separate multinational company, Turbo-Union, was formed in June 1970 to develop and build the RB199 engines for the aircraft, with ownership similarly split 40% Rolls-Royce, 40% MTU, and 20% FIAT.

 

At the conclusion of the project definition phase in May 1970, the concepts were reduced to two designs; a single seat Panavia 100 which West Germany initially preferred, and the twin-seat Panavia 200 which the RAF preferred (this would become the Tornado). The aircraft was briefly called the Panavia Panther, and the project soon coalesced towards the two-seat option. In September 1971, the three governments signed an Intention to Proceed (ITP) document, at which point the aircraft was intended solely for the low-level strike mission, where it was viewed as a viable threat to Soviet defences in that role. It was at this point that Britain's Chief of the Defence Staff announced "two-thirds of the fighting front line will be composed of this single, basic aircraft type".

  

Prototypes and testing

 

The first of more than a dozen Tornado prototypes took flight on 14 August 1974 at Manching, Germany; the pilot, Paul Millett described his experience: "Aircraft handling was delightful... the actual flight went so smoothly that I did begin to wonder whether this was not yet another simulation". Flight testing led to the need for minor modifications. Airflow disturbances were responded to by re-profiling the engine intakes and the fuselage to minimize surging and buffeting experienced at supersonic speeds.

 

According to Jim Quinn, programmer of the Tornado development simulation software and engineer on the Tornado engine and engine controls, the prototype was safely capable of reaching supercruise, but the engines had severe safety issues at high altitude while trying to decelerate. The triple shaft engine, designed for maximum power at low altitude, resulted in severe vibrations while attempting to decelerate at high altitude. At high altitude and low turbine speed the compressor did not provide enough pressure to hold back the combustion pressure and would result in a violent vibration as the combustion pressure backfired into the intake. To avoid this effect the engine controls would automatically increase the minimum idle setting as altitude increased, until at very high altitudes the idle setting was so high, however, that it was close to maximum dry thrust. This resulted in one of the test aircraft being stuck in a mach 1.2 supercruise at high altitude and having to reduce speed by turning the aircraft, because the idle setting at that altitude was so high that the aircraft could not decelerate.

 

The British Ministry of Supply ordered Chief Engineer Ted Talbot from the Concorde development team to provide intake design assistance to the Tornado development team in order to overcome these issues, which they hesitantly agreed to after noting that the Concorde intake data had apparently already been leaked to the Soviet Union. The German engineers working on the Tornado intake were unable to produce a functional Concorde style intake despite having data from the Concorde team. To make the problem worse, their management team incorrectly filed a patent on the Concorde design, and then tried to sue the British engineers who had provided the design to them. The German lawyers realized that the British had provided the designs to the German team, and requested further information to help their engineers overcome the problems with the Tornado intake, but Chief Engineer Talbot refused. According to Talbot, the Concorde engineers had determined the issue with the Tornado intake was that the engine did not respond to unexpected changes in the intake position, and therefore the engine was running at the wrong setting for a given position of the intake ramps. This was because the Concorde had similar issues due to control pressure not being high enough to maintain proper angles of the intake ramps. Aerodynamic forces could force the intakes into the improper position, and so they should have the ability to control the engines if this occurs. The Tornado intake system did not allow for this. Due to the behavior of the German management team, the British engineers declined to share this information, and so the Tornado was not equipped with the more advanced intake design of the Concorde.

 

Testing revealed that a nose-wheel steering augmentation system, connecting with the yaw damper, was necessary to counteract the destabilising effect produced by deploying the thrust reverser during landing rollouts.

 

From 1967 until 1984 Soviet KGB agents were provided details on the Tornado by the head of the West German Messerschmitt-Bölkow-Blohm Planning department, Manfred Rotsch.

 

Two prototypes were lost in accidents, both of which had been primarily caused by poor piloting decisions and errors leading to two ground collision incidents; a third Tornado prototype was seriously damaged by an incident involving pilot-induced pitch oscillation. During the type's development, aircraft designers of the era were beginning to incorporate features such as more sophisticated stability augmentation systems and autopilots. Aircraft such as the Tornado and the General Dynamics F-16 Fighting Falcon made use of these new technologies. Failure testing of the Tornado's triplex analogue command and stability augmentation system (CSAS) was conducted on a series of realistic flight control rigs; the variable-sweep wings in combination with varying, and frequently very heavy, payloads complicated the clearance process.

  

Production

 

The contract for the Batch 1 aircraft was signed on 29 July 1976. The first aircraft were delivered to the RAF and German Air Force on 5 and 6 June 1979 respectively. The first Italian Tornado was delivered on 25 September 1981. On 29 January 1981, the Tri-National Tornado Training Establishment (TTTE) officially opened at RAF Cottesmore, remaining active in training pilots from all operating nations until 31 March 1999. The 500th Tornado to be produced was delivered to West Germany on 19 December 1987.

 

Export customers were sought after West Germany withdrew its objections to exporting the aircraft; Saudi Arabia was the only export customer of the Tornado. The agreement to purchase the Tornado was part of the controversial Al-Yamamah arms deal between British Aerospace and the Saudi government. Oman had committed to purchasing Tornados and the equipment to operate them for a total value of £250 million in the late 1980s, but cancelled the order in 1990 due to financial difficulties.

 

During the 1970s, Australia considered joining the MRCA programme to find a replacement for their ageing Dassault Mirage IIIs; ultimately the McDonnell Douglas F/A-18 Hornet was selected to meet the requirement. Canada similarly opted for the F/A-18 after considering the Tornado. Japan considered the Tornado in the 1980s, along with the General Dynamics F-16 Fighting Falcon and F/A-18, before selecting the Mitsubishi F-2, a domestically produced design based on the F-16. In the 1990s, both Taiwan and South Korea expressed interest in acquiring a small number of Tornado ECR aircraft. In 2001, EADS proposed a Tornado ECR variant with a greater electronic warfare capability for Australia.

 

Production came to an end in 1998; the last batch of aircraft being produced went to the Royal Saudi Air Force, who had ordered a total of 96 IDS Tornados. In June 2011, it was announced that the RAF's Tornado fleet had flown collectively over one million flying hours. Aviation author Jon Lake noted that "The Trinational Panavia Consortium produced just short of 1,000 Tornados, making it one of the most successful postwar bomber programs". In 2008, AirForces Monthly said of the Tornado: "For more than a quarter of a century ... the most important military aircraft in Western Europe."

Headland is a civil parish in the Borough of Hartlepool, County Durham, England. The parish covers the old part of Hartlepool and nearby villages.

 

History

The Heugh Battery, one of three constructed to protect the port of Hartlepool in 1860, is located in the area along with a museum.

 

The area made national headlines in July 1994 in connection with the murder of Rosie Palmer, a local toddler.

 

On 19 March 2002 the Time Team searched for an Anglo-Saxon monastery.

 

Hartlepool is a seaside and port town in County Durham, England. It is governed by a unitary authority borough named after the town. The borough is part of the devolved Tees Valley area. With an estimated population of 87,995, it is the second-largest settlement (after Darlington) in County Durham.

 

The old town was founded in the 7th century, around the monastery of Hartlepool Abbey on a headland. As the village grew into a town in the Middle Ages, its harbour served as the County Palatine of Durham's official port. The new town of West Hartlepool was created in 1835 after a new port was built and railway links from the South Durham coal fields (to the west) and from Stockton-on-Tees (to the south) were created. A parliamentary constituency covering both the old town and West Hartlepool was created in 1867 called The Hartlepools. The two towns were formally merged into a single borough called Hartlepool in 1967. Following the merger, the name of the constituency was changed from The Hartlepools to just Hartlepool in 1974. The modern town centre and main railway station are both at what was West Hartlepool; the old town is now generally known as the Headland.

 

Industrialisation in northern England and the start of a shipbuilding industry in the later part of the 19th century meant it was a target for the Imperial German Navy at the beginning of the First World War. A bombardment of 1,150 shells on 16 December 1914 resulted in the death of 117 people in the town. A severe decline in heavy industries and shipbuilding following the Second World War caused periods of high unemployment until the 1990s when major investment projects and the redevelopment of the docks area into a marina saw a rise in the town's prospects. The town also has a seaside resort called Seaton Carew.

 

History

The place name derives from Old English heort ("hart"), referring to stags seen, and pōl (pool), a pool of drinking water which they were known to use. Records of the place-name from early sources confirm this:

 

649: Heretu, or Hereteu.

1017: Herterpol, or Hertelpolle.

1182: Hierdepol.

 

Town on the heugh

A Northumbrian settlement developed in the 7th century around an abbey founded in 640 by Saint Aidan (an Irish and Christian priest) upon a headland overlooking a natural harbour and the North Sea. The monastery became powerful under St Hilda, who served as its abbess from 649 to 657. The 8th-century Northumbrian chronicler Bede referred to the spot on which today's town is sited as "the place where deer come to drink", and in this period the Headland was named by the Angles as Heruteu (Stag Island). Archaeological evidence has been found below the current high tide mark that indicates that an ancient post-glacial forest by the sea existed in the area at the time.

 

The Abbey fell into decline in the early 8th century, and it was probably destroyed during a sea raid by Vikings on the settlement in the 9th century. In March 2000, the archaeological investigation television programme Time Team located the foundations of the lost monastery in the grounds of St Hilda's Church. In the early 11th century, the name had evolved into Herterpol.

 

Hartness

Normans and for centuries known as the Jewel of Herterpol.

During the Norman Conquest, the De Brus family gained over-lordship of the land surrounding Hartlepool. William the Conqueror subsequently ordered the construction of Durham Castle, and the villages under their rule were mentioned in records in 1153 when Robert de Brus, 1st Lord of Annandale became Lord of Hartness. The town's first charter was received before 1185, for which it gained its first mayor, an annual two-week fair and a weekly market. The Norman Conquest affected the settlement's name to form the Middle English Hart-le-pool ("The Pool of the Stags").

 

By the Middle Ages, Hartlepool was growing into an important (though still small) market town. One of the reasons for its escalating wealth was that its harbour was serving as the official port of the County Palatine of Durham. The main industry of the town at this time was fishing, and Hartlepool in this period established itself as one of the primary ports upon England's Eastern coast.

 

In 1306, Robert the Bruce was crowned King of Scotland, and became the last Lord of Hartness. Angered, King Edward I confiscated the title to Hartlepool, and began to improve the town's military defences in expectation of war. In 1315, before they were completed, a Scottish army under Sir James Douglas attacked, captured and looted the town.

 

In the late 15th century, a pier was constructed to assist in the harbour's workload.

 

Garrison

Hartlepool was once again militarily occupied by a Scottish incursion, this time in alliance with the Parliamentary Army during the English Civil War, which after 18 months was relieved by an English Parliamentarian garrison.

 

In 1795, Hartlepool artillery emplacements and defences were constructed in the town as a defensive measure against the threat of French attack from seaborne Napoleonic forces. During the Crimean War, two coastal batteries were constructed close together in the town to guard against the threat of seaborne attacks from the Imperial Russian Navy. They were entitled the Lighthouse Battery (1855) and the Heugh Battery (1859).

 

Hartlepool in the 18th century became known as a town with medicinal springs, particularly the Chalybeate Spa near the Westgate. The poet Thomas Gray visited the town in July 1765 to "take the waters", and wrote to his friend William Mason:

 

I have been for two days to taste the water, and do assure you that nothing could be salter and bitterer and nastier and better for you... I am delighted with the place; there are the finest walks and rocks and caverns.

 

A few weeks later, he wrote in greater detail to James Brown:

 

The rocks, the sea and the weather there more than made up to me the want of bread and the want of water, two capital defects, but of which I learned from the inhabitants not to be sensible. They live on the refuse of their own fish-market, with a few potatoes, and a reasonable quantity of Geneva [gin] six days in the week, and I have nowhere seen a taller, more robust or healthy race: every house full of ruddy broad-faced children. Nobody dies but of drowning or old-age: nobody poor but from drunkenness or mere laziness.

 

Town by the strand

By the early nineteenth century, Hartlepool was still a small town of around 900 people, with a declining port. In 1823, the council and Board of Trade decided that the town needed new industry, so the decision was made to propose a new railway to make Hartlepool a coal port, shipping out minerals from the Durham coalfield. It was in this endeavour that Isambard Kingdom Brunel visited the town in December 1831, and wrote: "A curiously isolated old fishing town – a remarkably fine race of men. Went to the top of the church tower for a view."

 

But the plan faced local competition from new docks. 25 kilometres (16 mi) to the north, the Marquis of Londonderry had approved the creation of the new Seaham Harbour (opened 31 July 1831), while to the south the Clarence Railway connected Stockton-on-Tees and Billingham to a new port at Port Clarence (opened 1833). Further south again, in 1831 the Stockton and Darlington Railway had extended into the new port of Middlesbrough.

 

The council agreed the formation of the Hartlepool Dock and Railway Company (HD&RCo) to extend the existing port by developing new docks, and link to both local collieries and the developing railway network in the south. In 1833, it was agreed that Christopher Tennant of Yarm establish the HD&RCo, having previously opened the Clarence Railway (CR). Tennant's plan was that the HD&RCo would fund the creation of a new railway, the Stockton and Hartlepool Railway, which would take over the loss-making CR and extended it north to the new dock, thereby linking to the Durham coalfield.

 

After Tennant died, in 1839, the running of the HD&RCo was taken over by Stockton-on-Tees solicitor, Ralph Ward Jackson. But Jackson became frustrated at the planning restrictions placed on the old Hartlepool dock and surrounding area for access, so bought land which was mainly sand dunes to the south-west, and established West Hartlepool. Because Jackson was so successful at shipping coal from West Hartlepool through his West Hartlepool Dock and Railway Company and, as technology developed, ships grew in size and scale, the new town would eventually dwarf the old town.

 

The 8-acre (3.2-hectare) West Hartlepool Harbour and Dock opened on 1 June 1847. On 1 June 1852, the 14-acre (5.7-hectare) Jackson Dock opened on the same day that a railway opened connecting West Hartlepool to Leeds, Manchester and Liverpool. This allowed the shipping of coal and wool products eastwards, and the shipping of fresh fish and raw fleeces westwards, enabling another growth spurt in the town. This in turn resulted in the opening of the Swainson Dock on 3 June 1856, named after Ward Jackson's father-in-law. In 1878, the William Gray & Co shipyard in West Hartlepool achieved the distinction of launching the largest tonnage of any shipyard in the world, a feat to be repeated on a number of occasions. By 1881, old Hartlepool's population had grown from 993 to 12,361, but West Hartlepool had a population of 28,000.

 

Ward Jackson Park

Ward Jackson helped to plan the layout of West Hartlepool and was responsible for the first public buildings. He was also involved in the education and the welfare of the inhabitants. In the end, he was a victim of his own ambition to promote the town: accusations of shady financial dealings, and years of legal battles, left him in near-poverty. He spent the last few years of his life in London, far away from the town he had created.

 

World Wars

In Hartlepool near Heugh Battery, a plaque in Redheugh Gardens War Memorial "marks the place where the first ...(German shell) struck... (and) the first soldier was killed on British soil by enemy action in the Great War 1914–1918."

The area became heavily industrialised with an ironworks (established in 1838) and shipyards in the docks (established in the 1870s). By 1913, no fewer than 43 ship-owning companies were located in the town, with the responsibility for 236 ships. This made it a key target for Germany in the First World War. One of the first German offensives against Britain was a raid and bombardment by the Imperial German Navy on the morning of 16 December 1914,

 

Hartlepool was hit with a total of 1150 shells, killing 117 people. Two coastal defence batteries at Hartlepool returned fire, launching 143 shells, and damaging three German ships: SMS Seydlitz, SMS Moltke and SMS Blücher. The Hartlepool engagement lasted roughly 50 minutes, and the coastal artillery defence was supported by the Royal Navy in the form of four destroyers, two light cruisers and a submarine, none of which had any significant impact on the German attackers.

 

Private Theophilus Jones of the 18th Battalion Durham Light Infantry, who fell as a result of this bombardment, is sometimes described as the first military casualty on British soil by enemy fire. This event (the death of the first soldiers on British soil) is commemorated by the 1921 Redheugh Gardens War Memorial together with a plaque unveiled on the same day (seven years and one day after the East Coast Raid) at the spot on the Headland (the memorial by Philip Bennison illustrates four soldiers on one of four cartouches and the plaque, donated by a member of the public, refers to the 'first soldier' but gives no name). A living history group, the Hartlepool Military Heritage Memorial Society, portray men of that unit for educational and memorial purposes.

 

Hartlepudlians voluntarily subscribed more money per head to the war effort than any other town in Britain.

 

On 4 January 1922, a fire starting in a timber yard left 80 people homeless and caused over £1,000,000 of damage. Hartlepool suffered badly in the Great Depression of the 1930s and endured high unemployment.

 

Unemployment decreased during the Second World War, with shipbuilding and steel-making industries enjoying a renaissance. Most of its output for the war effort were "Empire Ships". German bombers raided the town 43 times, though, compared to the previous war, civilian losses were lighter with 26 deaths recorded by Hartlepool Municipal Borough[19] and 49 by West Hartlepool Borough. During the Second World War, RAF Greatham (also known as RAF West Hartlepool) was located on the South British Steel Corporation Works.

 

The merge

In 1891, the two towns had a combined population of 64,000. By 1900, the two Hartlepools were, together, one of the three busiest ports in England.

 

The modern town represents a joining of "Old Hartlepool", locally known as the "Headland", and West Hartlepool. As already mentioned, what was West Hartlepool became the larger town and both were formally unified in 1967. Today the term "West Hartlepool" is rarely heard outside the context of sport, but one of the town's Rugby Union teams still retains the name.

 

The name of the town's professional football club reflected both boroughs; when it was formed in 1908, following the success of West Hartlepool in winning the FA Amateur Cup in 1905, it was called "Hartlepools United" in the hope of attracting support from both towns. When the boroughs combined in 1967, the club renamed itself "Hartlepool" before re-renaming itself Hartlepool United in the 1970s. Many fans of the club still refer to the team as "Pools"

 

Fall out

After the war, industry went into a severe decline. Blanchland, the last ship to be constructed in Hartlepool, left the slips in 1961. In 1967, Betty James wrote how "if I had the luck to live anywhere in the North East [of England]...I would live near Hartlepool. If I had the luck". There was a boost to the retail sector in 1970 when Middleton Grange Shopping Centre was opened by Princess Anne, with over 130 new shops including Marks & Spencer and Woolworths.

 

Before the shopping centre was opened, the old town centre was located around Lynn Street, but most of the shops and the market had moved to a new shopping centre by 1974. Most of Lynn Street had by then been demolished to make way for a new housing estate. Only the north end of the street remains, now called Lynn Street North. This is where the Hartlepool Borough Council depot was based (alongside the Focus DIY store) until it moved to the marina in August 2006.

 

In 1977, the British Steel Corporation announced the closure of its Hartlepool steelworks with the loss of 1500 jobs. In the 1980s, the area was afflicted with extremely high levels of unemployment, at its peak consisting of 30 per cent of the town's working-age population, the highest in the United Kingdom. 630 jobs at British Steel were lost in 1983, and a total of 10,000 jobs were lost from the town in the economic de-industrialization of England's former Northern manufacturing heartlands. Between 1983 and 1999, the town lacked a cinema and areas of it became afflicted with the societal hallmarks of endemic economic poverty: urban decay, high crime levels, drug and alcohol dependency being prevalent.

 

Rise and the future

Docks near the centre were redeveloped and reopened by Queen Elizabeth II in 1993 as a marina with the accompanying National Museum of the Royal Navy opened in 1994, then known as the Hartlepool Historic Quay.

 

A development corporation is under consultation until August 2022 to organise projects, with the town's fund given to the town and other funds. Plans would be (if the corporation is formed) focused on the railway station, waterfront (including the Royal Navy Museum and a new leisure centre) and Church Street. Northern School of Art also has funds for a TV and film studios.

 

Governance

There is one main tier of local government covering Hartlepool, at unitary authority level: Hartlepool Borough Council. There is a civil parish covering Headland, which forms an additional tier of local government for that area; most of the rest of the urban area is an unparished area. The borough council is a constituent member of the Tees Valley Combined Authority, led by the directly elected Tees Valley Mayor. The borough council is based at the Civic Centre on Victoria Road.

 

Hartlepool was historically a township in the ancient parish of Hart. Hartlepool was also an ancient borough, having been granted a charter by King John in 1200. The borough was reformed to become a municipal borough in 1850. The council built Hartlepool Borough Hall to serve as its headquarters, being completed in 1866.

 

West Hartlepool was laid out on land outside Hartlepool's historic borough boundaries, in the neighbouring parish of Stranton. A body of improvement commissioners was established to administer the new town in 1854. The commissioners were superseded in 1887, when West Hartlepool was also incorporated as a municipal borough. The new borough council built itself a headquarters at the Municipal Buildings on Church Square, which was completed in 1889. An events venue and public hall on Raby Road called West Hartlepool Town Hall was subsequently completed in 1897. In 1902 West Hartlepool was elevated to become a county borough, making it independent from Durham County Council. The old Hartlepool Borough Council amalgamated with West Hartlepool Borough Council in 1967 to form a county borough called Hartlepool.

 

In 1974 the borough was enlarged to take in eight neighbouring parishes, and was transferred to the new county of Cleveland. Cleveland was abolished in 1996 following the Banham Review, which gave unitary authority status to its four districts, including Hartlepool. The borough was restored to County Durham for ceremonial purposes under the Lieutenancies Act 1997, but as a unitary authority it is independent from Durham County Council.

 

Emergency services

Hartlepool falls within the jurisdiction of Cleveland Fire Brigade and Cleveland Police. Before 1974, it was under the jurisdiction of the Durham Constabulary and Durham Fire Brigade. Hartlepool has two fire stations: a full-time station at Stranton and a retained station on the Headland.

 

Economy

Hartlepool's economy has historically been linked with the maritime industry, something which is still at the heart of local business. Hartlepool Dock is owned and run by PD Ports. Engineering related jobs employ around 1700 people. Tata Steel Europe employ around 350 people in the manufacture of steel tubes, predominantly for the oil industry. South of the town on the banks of the Tees, Able UK operates the Teesside Environmental Reclamation and Recycling Centre (TERRC), a large scale marine recycling facility and dry dock. Adjacent to the east of TERRC is the Hartlepool nuclear power station, an advanced gas-cooled reactor (AGR) type nuclear power plant opened in the 1980s. It is the single largest employer in the town, employing 1 per cent of the town's working age people.

 

The chemicals industry is important to the local economy. Companies include Huntsman Corporation, who produce titanium dioxide for use in paints, Omya, Baker Hughes and Frutarom.

 

Tourism was worth £48 million to the town in 2009; this figure excludes the impact of the Tall Ships 2010. Hartlepool's historic links to the maritime industry are centred on the Maritime Experience, and the supporting exhibits PS Wingfield Castle and HMS Trincomalee.

 

Camerons Brewery was founded in 1852 and currently employs around 145 people. It is one of the largest breweries in the UK. Following a series of take-overs, it came under the control of the Castle Eden Brewery in 2001 who merged the two breweries, closing down the Castle Eden plant. It brews a range of cask and bottled beers, including Strongarm, a 4% abv bitter. The brewery is heavily engaged in contract brewing such beers as Kronenbourg 1664, John Smith's and Foster's.

 

Orchid Drinks of Hartlepool were formed in 1992 after a management buy out of the soft drinks arm of Camerons. They manufactured Purdey's and Amé. Following a £67 million takeover by Britvic, the site was closed down in 2009.

 

Middleton Grange Shopping Centre is the main shopping location. 2800 people are employed in retail. The ten major retail companies in the town are Tesco, Morrisons, Asda, Next, Argos, Marks & Spencer, Aldi, Boots and Matalan. Aside from the local sports clubs, other local entertainment venues include a VUE Cinema and Mecca Bingo.

 

Companies that have moved operations to the town for the offshore wind farm include Siemens and Van Oord.

 

Culture and community

Festivals and Fairs

Since November 2014 the Headland has hosted the annual Wintertide Festival, which is a weekend long event that starts with a community parade on the Friday and culminating in a finale performance and fireworks display on the Sunday.

 

Tall Ships' Races

On 28 June 2006 Hartlepool celebrated after winning its bid to host The Tall Ships' Races. The town welcomed up to 125 tall ships in 2010, after being chosen by race organiser Sail Training International to be the finishing point for the race. Hartlepool greeted the ships, which sailed from Kristiansand in Norway on the second and final leg of the race. Hartlepool also hosted the race in July 2023.

 

Museums, art galleries and libraries

Hartlepool Art Gallery is located in Church Square within Christ Church, a restored Victorian church, built in 1854 and designed by the architect Edward Buckton Lamb (1806–1869). The gallery's temporary exhibitions change frequently and feature works from local artists and the permanent Fine Art Collection, which was established by Sir William Gray. The gallery also houses the Hartlepool tourist information centre.

 

The Heugh Battery Museum is located on the Headland. It was one of three batteries erected to protect Hartlepool's port in 1860. The battery was closed in 1956 and is now in the care of the Heugh Gun Battery Trust and home to an artillery collection.

 

Hartlepool is home to a National Museum of the Royal Navy (more specifically the NMRN Hartlepool). Previously known simply as The Historic Quay and Hartlepool's Maritime Experience, the museum is a re-creation of an 18th-century seaport with the exhibition centre-piece being a sailing frigate, HMS Trincomalee. The complex also includes the Museum of Hartlepool.

 

Willows was the Hartlepool mansion of the influential Sir William Gray of William Gray & Company and he gifted it to the town in 1920, after which it was converted to be the town's first museum and art gallery. Fondly known locally as "The Gray" it was closed as a museum in 1994 and now houses the local authority's culture department.

 

There are six libraries in Hartlepool, the primary one being the Community Hub Central Library. Others are Throston Grange Library, Community Hub North Library, Seaton Carew Library, Owton Manor Library and Headland Branch Library.

 

Sea

Hartlepool has been a major seaport virtually since it was founded, and has a long fishing heritage. During the industrial revolution massive new docks were created on the southern side of the channel running below the Headland, which gave rise to the town of West Hartlepool.

 

Now owned by PD Ports, the docks are still in use today and still capable of handling large vessels. However, a large portion of the former dockland was converted into a marina capable of berthing 500 vessels. Hartlepool Marina is home to a wide variety of pleasure and working craft, with passage to and from the sea through a lock.

 

Hartlepool also has a permanent RNLI lifeboat station.

 

Education

Secondary

Hartlepool has five secondary schools:

 

Dyke House Academy

English Martyrs School and Sixth Form College

High Tunstall College of Science

Manor Community Academy

St Hild's Church of England School

The town had planned to receive funding from central government to improve school buildings and facilities as a part of the Building Schools for the Future programme, but this was cancelled because of government spending cuts.

 

College

Hartlepool College of Further Education is an educational establishment located in the centre of the town, and existed in various forms for over a century. Its former 1960s campus was replaced by a £52million custom-designed building, it was approved in principle in July 2008, opened in September 2011.

 

Hartlepool also has Hartlepool Sixth Form College. It was a former grammar and comprehensive school, the college provides a number of AS and A2 Level student courses. The English Martyrs School and Sixth Form College also offers AS, A2 and other BTEC qualification to 16- to 18-year-olds from Hartlepool and beyond.

 

A campus of The Northern School of Art is a specialist art and design college and higher education, located adjacent to the art gallery on Church Square. The college has a further site in Middlesbrough that facilitates further education.

 

Territorial Army

Situated in the New Armoury Centre, Easington Road are the following units.

 

Royal Marines Reserve

90 (North Riding) Signal Squadron

 

Religion

They are multiple Church of England and Roman Catholic Churches in the town. St Hilda's Church is a notable church of the town, it was built on Hartlepool Abbey and sits upon a high point of the Headland. The churches of the Church of England's St Paul and Roman Catholic's St Joseph are next to each other on St Paul's Road. Nasir Mosque on Brougham Terrace is the sole purpose-built mosque in the town.

 

Sport

Football

Hartlepool United is the town's professional football club and they play at Victoria Park. The club's most notable moment was in 2005 when, with 8 minutes left in the 2005 Football League One play-off final, the team conceded a penalty, allowing Sheffield Wednesday to equalise and eventually beat Hartlepool to a place in the Championship. The club currently play in the National League.

 

Supporters of the club bear the nickname of Monkey Hangers. This is based upon a legend that during the Napoleonic wars a monkey, which had been a ship's mascot, was taken for a French spy and hanged. Hartlepool has also produced football presenter Jeff Stelling, who has a renowned partnership with Chris Kamara who was born in nearby Middlesbrough. Jeff Stelling is a keen supporter of Hartlepool and often refers to them when presenting Sky Sports News. It is also the birthplace and childhood home of Pete Donaldson, one of the co-hosts of the Football Ramble podcast as well as co-host of the Abroad in Japan podcast, and a prominent radio DJ.

 

The town also has a semi-professional football club called FC Hartlepool who play in Northern League Division Two.

 

Rugby union

Hartlepool is something of an anomaly in England having historically maintained a disproportionate number of clubs in a town of only c.90,000 inhabitants. These include(d) West Hartlepool, Hartlepool Rovers, Hartlepool Athletic RFC, Hartlepool Boys Brigade Old Boys RFC (BBOB), Seaton Carew RUFC (formerly Hartlepool Grammar School Old Boys), West Hartlepool Technical Day School Old Boys RUFC (TDSOB or Tech) and Hartlepool Old Boys' RFC (Hartlepool). Starting in 1904 clubs within eight miles (thirteen kilometres) of the headland were eligible to compete for the Pyman Cup which has been contested regularly since and that the Hartlepool & District Union continue to organise.

 

Perhaps the best known club outside the town is West Hartlepool R.F.C. who in 1992 achieved promotion to what is now the Premiership competing in 1992–93, 1994–95, 1995–96 and 1996–97 seasons. This success came at a price as soon after West was then hit by bankruptcy and controversially sold their Brierton Lane stadium and pitch to former sponsor Yuills Homes. There then followed a succession of relegations before the club stabilised in the Durham/Northumberland leagues. West and Rovers continue to play one another in a popular Boxing Day fixture which traditionally draws a large crowd.

 

Hartlepool Rovers, formed in 1879, who played at the Old Friarage in the Headland area of Hartlepool before moving to West View Road. In the 1890s Rovers supplied numerous county, divisional and international players. The club itself hosted many high-profile matches including the inaugural Barbarians F.C. match in 1890, the New Zealand Maoris in 1888 and the legendary All Blacks who played against a combined Hartlepool Club team in 1905. In the 1911–12 season, Hartlepool Rovers broke the world record for the number of points scored in a season racking up 860 points including 122 tries, 87 conversions, five penalties and eleven drop goals.

 

Although they ceased competing in the RFU leagues in 2008–09, West Hartlepool TDSOB (Tech) continues to support town and County rugby with several of the town's other clubs having played at Grayfields when their own pitches were unavailable. Grayfields has also hosted a number of Durham County cup finals as well as County Under 16, Under 18 and Under 20 age group games.

 

Olympics

Boxing

At the 2012 Summer Olympics, 21-year-old Savannah Marshall, who attended English Martyrs School and Sixth Form College in the town of Hartlepool, competed in the Women's boxing tournament of the 2012 Olympic Games. She was defeated 12–6 by Marina Volnova of Kazakhstan in her opening, quarter-final bout. Savannah Marshall is now a professional boxer, currently unbeaten as a pro and on 31 October 2020 in her 9th professional fight Marshall became the WBO female middleweight champion with a TKO victory over opponent Hannah Rankin at Wembley Arena.

 

Swimming

In August 2012 Jemma Lowe, a British record holder who attended High Tunstall College of Science in the town of Hartlepool, competed in the 2012 Olympic Games. She finished sixth in the 200-metre butterfly final with a time of 58.06 seconds. She was also a member of the eighth-place British team in the 400m Medley relay.

 

Monkeys

Hartlepool is known for allegedly executing a monkey during the Napoleonic Wars. According to legend, fishermen from Hartlepool watched a French warship founder off the coast, and the only survivor was a monkey, which was dressed in French military uniform, presumably to amuse the officers on the ship. The fishermen assumed that this must be what Frenchmen looked like and, after a brief trial, summarily executed the monkey.

 

Historians have pointed to the prior existence of a Scottish folk song called "And the Boddamers hung the Monkey-O". It describes how a monkey survived a shipwreck off the village of Boddam near Peterhead in Aberdeenshire. Because the villagers could only claim salvage rights if there were no survivors from the wreck, they allegedly hanged the monkey. There is also an English folk song detailing the later event called, appropriately enough, "The Hartlepool Monkey". In the English version the monkey is hanged as a French spy.

 

"Monkey hanger" and Chimp Choker are common terms of (semi-friendly) abuse aimed at "Poolies", often from footballing rivals Darlington. The mascot of Hartlepool United F.C. is H'Angus the monkey. The man in the monkey costume, Stuart Drummond, stood for the post of mayor in 2002 as H'angus the monkey, and campaigned on a platform which included free bananas for schoolchildren. To widespread surprise, he won, becoming the first directly elected mayor of Hartlepool, winning 7,400 votes with a 52% share of the vote and a turnout of 30%. He was re-elected by a landslide in 2005, winning 16,912 on a turnout of 51% – 10,000 votes more than his nearest rival, the Labour Party candidate.

 

The monkey legend is also linked with two of the town's sports clubs, Hartlepool Rovers RFC, which uses the hanging monkey as the club logo. Hartlepool (Old Boys) RFC use a hanging monkey kicking a rugby ball as their tie crest.

 

Notable residents

Michael Brown, former Premier League footballer

Edward Clarke, artist

Brian Clough, football manager who lived in the Fens estate in town while manager of Hartlepools United

John Darwin, convicted fraudster who faked his own death

Pete Donaldson, London radio DJ and podcast host

Janick Gers, guitarist from British heavy metal band Iron Maiden

Courtney Hadwin, singer

Jack Howe, former England international footballer

Liam Howe, music producer and songwriter for several artists and member of the band Sneaker Pimps

Saxon Huxley, WWE NXT UK wrestler

Andy Linighan, former Arsenal footballer who scored the winning goal in the 1993 FA Cup Final

Savannah Marshall, professional boxer

Stephanie Aird, comedian and television personality

Jim Parker, composer

Guy Pearce, film actor who lived in the town when he was younger as his mother was from the town

Narbi Price, artist

Jack Rowell, coached the England international rugby team and led them to the semi-final of the 1995 Rugby World Cup

Wayne Sleep, dancer and actor who spent his childhood in the town.

Reg Smythe, cartoonist who created Andy Capp

Jeremy Spencer, guitarist who was in the original Fleetwood Mac line-up

Jeff Stelling, TV presenter, famous for hosting Gillette Soccer Saturday

David Eagle, Folk singer and stand-up comedian,

Local media

Hartlepool Life - local free newspaper

Hartlepool Mail – local newspaper

BBC Radio Tees – BBC local radio station

Radio Hartlepool – Community radio station serving the town

Hartlepool Post – on-line publication

Local television news programmes are BBC Look North and ITV News Tyne Tees.

 

Town twinning

Hartlepool is twinned with:

France Sète, France

Germany Hückelhoven, Germany (since 1973)

United States Muskegon, Michigan

Malta Sliema, Malta

Dr Alia Crum arrived in the soft brightness that comes after a storm. The air outside Stanford’s Psychology Building was cool and clear, the kind of light that makes everything feel freshly washed. She settled into a comfortable chair in her office with an easy calm, as if the morning’s weather had cleared a little space around her too.

Crum is a psychologist who studies something deceptively simple. She examines how beliefs shape physiology. Not in the loose mystical way that phrase sometimes gets tossed around. Her work cuts closer to the bone. The body is not a passive machine. It responds to expectation. It listens to mindset. She has built a career showing that what we think about stress, food, exercise, illness and treatment can tilt the body’s response in measurable ways.

Her early work came out of a moment most of us would ignore. While studying stress at Yale she realized that stress itself was not always the enemy. The fear of stress could be worse. The belief that stress is damaging primes the body to show more harmful patterns. The belief that stress can sharpen performance nudges the system toward resilience. Not wishful thinking. Observable biology. Shifts in cortisol. Changes in blood vessel constriction. A different hormonal conversation between mind and body.

One of her most famous studies grew from that instinct to question the obvious. The milkshake experiment has been told and retold because of how blunt and beautiful it is. Crum and her team gave participants a milkshake. Same ingredients. Same calories. Same everything. But the label was switched. For one group it was described as a rich decadent indulgence. For the other it appeared as a restrained sensible shake. People drank it while their hunger hormones were measured. Ghrelin the hormone that pushes hunger up or down behaved as if the labels were real. The decadent shake triggered a steep drop in ghrelin as though the body believed satisfaction had arrived. The restrained shake left ghrelin high as though the body had been shortchanged. The stomach listened not just to what was swallowed but to the story around it.

Crum leans into these contradictions. The world is overflowing with advice about how to treat your body. She keeps asking how the body treats belief. Her research at the Mind and Body Lab explores placebos, treatment expectations, the power of framing and how subtle shifts in context can rewrite physiology. People heal faster when they think a treatment is potent even if the medication is identical. Housekeepers who were told their daily work counted as exercise showed improvements in weight and blood pressure without any change in actual workload. Mindset became part of the treatment itself.

Talking with her you sense someone who has not grown cynical despite years of studying human perception. She seems fascinated by how easily the mind can box itself in and how quickly it can step out again with the right nudge. During the shoot she often rested her hand on a notebook the way some people hold a compass. These experiments begin as questions scribbled on a page before they grow into protocols, measurements and data sets that surprise the field again and again.

There is a warmth to the way she listens. She gives every idea a moment to breathe before responding. It makes sense. Her whole scientific life is built on the idea that thoughts matter. Beliefs matter. Not in a magical way. In a biological way. You walk out of her lab with the unsettling and oddly hopeful sense that the stories we tell ourselves are not just background noise. They seep inward. They shape the body. They set the terms for how we cope with stress, how we move through illness and how we meet our own expectations.

Photographing her on that quiet afternoon at Stanford felt like brushing up against the edge of a much larger truth. The mind is not sealed off from the body. Crum has spent her career proving it. And she is only getting started.

During a busy week in Cluj-Napoca, capital of Transsylvania, Romania, steampunk theme restaurant Joben Bistro became my daily watering hole to spend the evening and let the workload of the day drift away by diving into the mystic underground. With three steampunk restaurants in just one city, Cluj-Napoca is a very unique place that has probably no counterpart outside Transsylvania.

John King was built in 1935 to tow cargo ships from Bristol City Docks to the mouth of the River Avon.

 

As trade to the Bristol docks declined and motor ships became less reliant on tugs, John King’s workload gradually disappeared. Eventually she was bought by Bristol Museums and fully restored to her former glory.

 

It is possible to take trips on this tug.

 

See www.bristolmuseums.org.uk/m-shed/whats-at/working-exhibits/ for details of the working exhibits at this Bristol Museum.