View allAll Photos Tagged wallinsulation
Project Location: Ellicott City, MD.
Project Name: Race Pace Bicycles
Product: 20 PSI, R-Tech (2" x 4 x 8 Sheets)
Application: Wall Insulation behind metal wall panels
Distributor: Morris Ginsburg - Brian Jones
Insulfoam Rep Group: Roof Pro
Race Pace Bicycles is retrofitting and expanding their shop and used 20 PSI R-Tech (2" x 4 x 8 Sheets) for wall insulation behind the metal wall panels. R-Tech supplied by Morris Ginsburg and installed by Roof Pro.
Photos courtesy of www.ahsarch.com
Ammon Heisler Sachs Architects, P.C.
More product information:
Insulfoam Facebook:
Insulfoam Twitter:
twitter.com/#!/Insulfoam
Tapered InsulFoam is cut from the same high-quality stock as our flat InsulFoam products, and meets or exceeds the requirements of ASTM C578, Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation. Tapered panels were used for increasing slope for additional drainage and offers a long-term, stable R-Value and has excellent dimensional stability, compressive strength and water resistant properties.
Project Location: Phoenix, AZ
Full taper package and crickets under Carlisle Syntec .060 mechanically attached TPO. Used: InsulFoam I tapered system.
Roofing Contractor: Gryphon Roofing
More product information:
Insulfoam Facebook:
Insulfoam Twitter:
twitter.com/#!/Insulfoam
Tapered InsulFoam is cut from the same high-quality stock as our flat InsulFoam products, and meets or exceeds the requirements of ASTM C578, Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation. Tapered panels were used for increasing slope for additional drainage and offers a long-term, stable R-Value and has excellent dimensional stability, compressive strength and water resistant properties.
Project Location: Phoenix, AZ
Full taper package and crickets under Carlisle Syntec .060 mechanically attached TPO. Used: InsulFoam I tapered system.
Roofing Contractor: Gryphon Roofing
More product information:
Insulfoam Facebook:
Insulfoam Twitter:
twitter.com/#!/Insulfoam
Tapered InsulFoam is cut from the same high-quality stock as our flat InsulFoam products, and meets or exceeds the requirements of ASTM C578, Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation. Tapered panels were used for increasing slope for additional drainage and offers a long-term, stable R-Value and has excellent dimensional stability, compressive strength and water resistant properties.
Project Location: Phoenix, AZ
Full taper package and crickets under Carlisle Syntec .060 mechanically attached TPO. Used: InsulFoam I tapered system.
Roofing Contractor: Gryphon Roofing
More product information:
Insulfoam Facebook:
Insulfoam Twitter:
twitter.com/#!/Insulfoam
Tapered InsulFoam is cut from the same high-quality stock as our flat InsulFoam products, and meets or exceeds the requirements of ASTM C578, Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation. Tapered panels were used for increasing slope for additional drainage and offers a long-term, stable R-Value and has excellent dimensional stability, compressive strength and water resistant properties.
Project Location: Phoenix, AZ
Full taper package and crickets under Carlisle Syntec .060 mechanically attached TPO. Used: InsulFoam I tapered system.
Roofing Contractor: Gryphon Roofing
More product information:
Insulfoam Facebook:
Insulfoam Twitter:
twitter.com/#!/Insulfoam
Tapered InsulFoam is cut from the same high-quality stock as our flat InsulFoam products, and meets or exceeds the requirements of ASTM C578, Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation. Tapered panels were used for increasing slope for additional drainage and offers a long-term, stable R-Value and has excellent dimensional stability, compressive strength and water resistant properties.
Project Location: Phoenix, AZ
Full taper package and crickets under Carlisle Syntec .060 mechanically attached TPO. Used: InsulFoam I tapered system.
Roofing Contractor: Gryphon Roofing
More product information:
Insulfoam Facebook:
Insulfoam Twitter:
twitter.com/#!/Insulfoam
Location: SLC, UT
Product Used: Insulfoam 1# EPS and 1.25# Insulfoam SP in two layers to achieve and R21.
Benefits: Using Insulfoam over ISO helped the contractor get the project and saved them roughly $90,000 on 5200 squares.
Contractor: All Weather Waterproofing
More product information:
Insulfoam Facebook:
Insulfoam Twitter:
Location: SLC, UT
Product Used: Insulfoam 1# EPS and 1.25# Insulfoam SP in two layers to achieve and R21.
Benefits: Using Insulfoam over ISO helped the contractor get the project and saved them roughly $90,000 on 5200 squares.
Contractor: All Weather Waterproofing
More product information:
Insulfoam Facebook:
Insulfoam Twitter:
May 22nd marked the day one year ago that the deadliest twister since 1947 largely destroyed the former St. John's Regional Medical Center in Joplin and leveled much of the town.
The new factory built Mercy hospital is 30% stronger than requirements for the old hospital. And the facility is the largest acute care hospital ever built with modular construction.
Insulfoam was used to help roof combat strength, water absorption, stability, stable R-value and excellent performance. Photos show 15" thick tapered Insulfoam product being loaded onto the roof.
More product information:
Insulfoam Facebook:
Insulfoam Twitter:
3.5" Hunter XCI CG PreCut to fit tracks Polyiso Continuous Insulation installed over 3M 3015 AVB Roosevelt Field Neiman Marcus. Polyiso higher thermal resistance allows for thinner tracks and overall wall thickness. Passes NFPA 285
Xci CG is a high-thermal rigid insulation panel composed of a closed cell polyisocyanurate foam core manufactured on-line to premium performance coated glass facers on both sides. It is designed for use in commercial wall applications to provide continuous insulation within the building envelope.
Project: Lorain High School
Product: XCi Ply 2.1" and 2.6"
Contractor: Mosser Construction
Xci Ply is a high thermal rigid insulation panel composed of a closed cell polyisocyanurate foam core bonded to a premium performance coated glass facer on one side and 5/8" or 3/4" fire treated plywood on the other. It is designed for use in commercial wall applications to provide continuous insulation within the building envelope.
More info: www.hunterxci.com/index.php/hunter-xci-ply
3.5" Hunter XCI CG PreCut to fit tracks Polyiso Continuous Insulation installed over 3M 3015 AVB Roosevelt Field Neiman Marcus. Polyiso higher thermal resistance allows for thinner tracks and overall wall thickness. Passes NFPA 285
Xci CG is a high-thermal rigid insulation panel composed of a closed cell polyisocyanurate foam core manufactured on-line to premium performance coated glass facers on both sides. It is designed for use in commercial wall applications to provide continuous insulation within the building envelope.
The existing Freeport Community Center & a historic Edward B. Mallett house has been joined by a spacious addition to provide new social services offices, thrift store, teen center, coffee bar & multi-funtion community room. Not only was there a goal to preserve history landmarks....but to obtain serious energy savings!
Hunter XCI Foil product is used in the construction of the renovation & addition of the Freeport Community Center.. XCI Foil is a high thermal, rigid building insulation composed of a closed cell polyiso foam core bonded on-line during the manufacturing process to an impermeable foil facing material. It is designed for use in commercial cavity wall applications to provide continuous insulation within the building envelope.
Hunter Xci polyiso products:
- Have the highest R-Value per inch of any insulation
- NFPA 285 TEST - Passed
- Energy Star approved
- Contribute toward LEED certification credits
- HCFC, CFC, zero ODP, and negligable GWP.
Construction by: Warren Construction
XCI Twitter: twitter.com/#!/HunterXCI
XCI Facebook: www.facebook.com/pages/Hunter-Xci-Exterior-Continuous-Ins...
View more: www.hunterxci.com/
Project Location: Ellicott City, MD.
Project Name: Race Pace Bicycles
Product: 20 PSI, R-Tech (2" x 4 x 8 Sheets)
Application: Wall Insulation behind metal wall panels
Distributor: Morris Ginsburg - Brian Jones
Insulfoam Rep Group: Roof Pro
Race Pace Bicycles is retrofitting and expanding their shop and used 20 PSI R-Tech (2" x 4 x 8 Sheets) for wall insulation behind the metal wall panels. R-Tech supplied by Morris Ginsburg and installed by Roof Pro.
Photos courtesy of www.ahsarch.com
Ammon Heisler Sachs Architects, P.C.
More product information:
Insulfoam Facebook:
Insulfoam Twitter:
twitter.com/#!/Insulfoam
Project Location: Ellicott City, MD.
Project Name: Race Pace Bicycles
Product: 20 PSI, R-Tech (2" x 4 x 8 Sheets)
Application: Wall Insulation behind metal wall panels
Distributor: Morris Ginsburg - Brian Jones
Insulfoam Rep Group: Roof Pro
Race Pace Bicycles is retrofitting and expanding their shop and used 20 PSI R-Tech (2" x 4 x 8 Sheets) for wall insulation behind the metal wall panels. R-Tech supplied by Morris Ginsburg and installed by Roof Pro.
Photos courtesy of www.ahsarch.com
Ammon Heisler Sachs Architects, P.C.
More product information:
Insulfoam Facebook:
Insulfoam Twitter:
twitter.com/#!/Insulfoam
Xci 286 is an energy-efficient rigid foam insulation composed of a polyisocyanurate foam core manufactured online to glass fiber reinforced foil facers. It can be used in new construction, or used for interior retrofit within existing buildings.
Xci 286 is designed for exposed interior wall or ceiling use in commercial, residential, industrial, agricultural and metal building applications.
Hunter Xci 286 offers more installation options…
Either side may be left exposed; reflective foil or white foil, and does not require an additional thermal barrier.
Photos provided by Sierra Building Products in Kansas City
More info: www.hunterxci.com/index.php/hunter-xci-286
Project: Dartmouth College's new high Performance building, 174,500 sq. ft, LEED Platinum goal.
Product: Hunter Xci Ply is a rigid wall composite insulation panel composed of a closed cell polyisocyanurate foam core bonded to a fiber reinforced facer on one side and 5/8” or ¾” Fire treated plywood on the other. It is designed for use as exterior continuous insulation in a wall assembly.
Architect: Bohlin Cywiski Jackson
GC: Bond Brothers
More: www.hunterxci.com/
Hunter XCI on FB: www.facebook.com/pages/Hunter-Xci-Exterior-Continuous-Ins...
Hunter XCI on Twitter: twitter.com/#!/HunterXCI
Insulfoam's tapered EPS insulation is so easy to cut and install on this Arizona single ply TPO roofing project installation. Tapered InsulFoam is cut from the same high-quality stock as our flat InsulFoam products, and meets or exceeds the requirements of ASTM C578, Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation. Tapered panels were used for increasing slope for additional drainage and offers a long-term, stable R-Value and has excellent dimensional stability, compressive strength and water resistant properties.
Project: Gainey Ranch Corporate Center, Scottsdale AZ
Product Used: InsulFoam II tapered system with crickets under a 115 mil Carlisle SynTec Fleecback system.
Roofing Contractor: Starkweather Roofing, Inc.
More product information:
Insulfoam Facebook:
Insulfoam Twitter:
Project Location: Ellicott City, MD.
Project Name: Race Pace Bicycles
Product: 20 PSI, R-Tech (2" x 4 x 8 Sheets)
Application: Wall Insulation behind metal wall panels
Distributor: Morris Ginsburg - Brian Jones
Insulfoam Rep Group: Roof Pro
Race Pace Bicycles is retrofitting and expanding their shop and used 20 PSI R-Tech (2" x 4 x 8 Sheets) for wall insulation behind the metal wall panels. R-Tech supplied by Morris Ginsburg and installed by Roof Pro.
Photos courtesy of www.ahsarch.com
Ammon Heisler Sachs Architects, P.C.
More product information:
Insulfoam Facebook:
Insulfoam Twitter:
twitter.com/#!/Insulfoam
Hickory Woods, TN: Product: Hunter Xci Ply is a rigid wall composite insulation panel composed of a closed cell polyisocyanurate foam core bonded to a fiber reinforced facer on one side and 5/8” or ¾” Fire treated plywood on the other. It is designed for use as exterior continuous insulation in a wall assembly.
More: www.hunterxci.com/
Hunter XCI on FB: www.facebook.com/pages/Hunter-Xci-Exterior-Continuous-Ins...
Hunter XCI on Twitter: twitter.com/HunterXCI
Project Location: Ellicott City, MD.
Project Name: Race Pace Bicycles
Product: 20 PSI, R-Tech (2" x 4 x 8 Sheets)
Application: Wall Insulation behind metal wall panels
Distributor: Morris Ginsburg - Brian Jones
Insulfoam Rep Group: Roof Pro
Race Pace Bicycles is retrofitting and expanding their shop and used 20 PSI R-Tech (2" x 4 x 8 Sheets) for wall insulation behind the metal wall panels. R-Tech supplied by Morris Ginsburg and installed by Roof Pro.
Photos courtesy of www.ahsarch.com
Ammon Heisler Sachs Architects, P.C.
More product information:
Insulfoam Facebook:
Insulfoam Twitter:
twitter.com/#!/Insulfoam
Location: SLC, UT
Product Used: Insulfoam 1# EPS and 1.25# Insulfoam SP in two layers to achieve and R21.
Benefits: Using Insulfoam over ISO helped the contractor get the project and saved them roughly $90,000 on 5200 squares.
Contractor: All Weather Waterproofing
More product information:
Insulfoam Facebook:
Insulfoam Twitter:
Project Location: Ellicott City, MD.
Project Name: Race Pace Bicycles
Product: 20 PSI, R-Tech (2" x 4 x 8 Sheets)
Application: Wall Insulation behind metal wall panels
Distributor: Morris Ginsburg - Brian Jones
Insulfoam Rep Group: Roof Pro
Race Pace Bicycles is retrofitting and expanding their shop and used 20 PSI R-Tech (2" x 4 x 8 Sheets) for wall insulation behind the metal wall panels. R-Tech supplied by Morris Ginsburg and installed by Roof Pro.
Photos courtesy of www.ahsarch.com
Ammon Heisler Sachs Architects, P.C.
More product information:
Insulfoam Facebook:
Insulfoam Twitter:
twitter.com/#!/Insulfoam
Insulfoam's tapered EPS insulation is so easy to cut and install on this Arizona single ply TPO roofing project installation. Tapered InsulFoam is cut from the same high-quality stock as our flat InsulFoam products, and meets or exceeds the requirements of ASTM C578, Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation. Tapered panels were used for increasing slope for additional drainage and offers a long-term, stable R-Value and has excellent dimensional stability, compressive strength and water resistant properties.
Project: Gainey Ranch Corporate Center, Scottsdale AZ
Product Used: InsulFoam II tapered system with crickets under a 115 mil Carlisle SynTec Fleecback system.
Roofing Contractor: Starkweather Roofing, Inc.
More product information:
Insulfoam Facebook:
Insulfoam Twitter:
2.1" XCI Ply over gypsum and steel stud.
Architect: JRA Louisville
Contractor: Quality Interiors
Distributor: L&W Supply
Xci Ply is a high thermal rigid insulation panel composed of a closed cell polyisocyanurate foam core bonded to a premium performance coated glass facer on one side and 5/8" or 3/4" fire treated plywood on the other. It is designed for use in commercial wall applications to provide continuous insulation within the building envelope.
More info: www.hunterxci.com/index.php/hunter-xci-ply