View allAll Photos Tagged studioadi
Sculpt progress on the Newborn - Alien: Resurrection - 1:18 scale. Sculpt made entirely from Aves FIXIT Sculpt by Aves Studio LLC
I said "entirely" because it's the first figure I have created so far in which I haven't used a frame of any kind to sculpt upon. Total FIXIT with a little weight to it - makes it feel expensive LOL! I need to do a scale shot to show how it scales to my 3.75" figures in the series.
Working on completing the lower abdomen of the creature, which will connect via a ball socket to the upper torso...that comes later in the casting phase. Right now, all the parts will be connected via wire or wax clay. Haven't completed the back section of the lower abdomen yet.
Next step after finishing the lower abdomen will be the upper arms and the hips. I plan on tooling the arms with traditional shoulder joints with the hips being connected via ball sockets. This can all change as the sculpt progresses.
Hope you all enjoy the update. More to come! #newborn #alienresurrection #miniature #customactionfigure #alien #adi #studioadi
Sculpt update on the NEWBORN - Alien: Resurrection - 1:18 scale. Sculpt using Aves FIXIT Sculpt by Aves Studio LLC
Sculpted hips and began working the upper arms.
Realized I need to thin out the lower back a bit and complete some detail just behind the shoulders before I can replicate (mold/cast) and head on to the next stage. Loving the elongated arms of this beast....
At this point with the project, I have pretty much caught up to the point where I left off with the Covenant Xenomorph, Neomorph and Defiance Praetorian - arms and legs. So expect a variety of updates, not JUST the Newborn from this point forward.
More updates to come! Perhaps some Star Wars updates soon? Bringing some back to the workbench. #alien #alienresurrection #newborn #ripley8 #studioadi #sculpture #avesfixit #avesstudio studioADI
Sculpt update on The Newborn. Alien: Resurrection - 1:18 scale.
The many faces of the "butterfly".
Got some patching to do then each of these will have molds made.
I still have one more version to do before I return to sculpting the limbs. I want to do a "birth" version of the head turned up which will require a redo of the cranium sculpt, including neck and shoulders.
I have a build itch that's needing to be scratched so expect a return to the Nostromo build soon.
Had a muscle injury to deal with that put me out over the past week or so but back at it! More to come!!!
#alien #alienresurrection #newbornalien #sculpting #art #monsters #avesstudio #FIXITsculpt #studioadi #customactionfigure
Sculpt progress on the Newborn - Alien: Resurrection - 1:18 scale. Sculpt made entirely from Aves FIXIT Sculpt by Aves Studio LLC
I said "entirely" because it's the first figure I have created so far in which I haven't used a frame of any kind to sculpt upon. Total FIXIT with a little weight to it - makes it feel expensive LOL! I need to do a scale shot to show how it scales to my 3.75" figures in the series.
Working on completing the lower abdomen of the creature, which will connect via a ball socket to the upper torso...that comes later in the casting phase. Right now, all the parts will be connected via wire or wax clay. Haven't completed the back section of the lower abdomen yet.
Next step after finishing the lower abdomen will be the upper arms and the hips. I plan on tooling the arms with traditional shoulder joints with the hips being connected via ball sockets. This can all change as the sculpt progresses.
Hope you all enjoy the update. More to come! #newborn #alienresurrection #miniature #customactionfigure #alien #adi #studioadi
A shot showing more of the sculpted detail of the Newborn's tongue. Will be setting up molds for the completed head variants this week. If I can, I will record the process and release another video in the near future. :)
#alien #alienresurrection #newbornalien #ripley8 #avesfixit #avesstudio #customactionfigure #figuresculpting #miniatures
Sculpt update on The Queen - Aliens (86) - and the Egg Morpher - Aliens: Defiance - Dark Horse Comics. Both 1:18 scale.
The Queen
Completed the rough sculpt of the lower mandible and teeth. The lower mandible is a skeletal sculpt for the moment while I adjust and refine the teeth. After the lower teeth are complete, flesh detail will be added to the mandible.
The teeth are being sculpted on a separate pallet, so when completed can have a mold made and cast in clear resin. The teeth are individually sculpted using Aves FIXIT sculpt, a two-part epoxy from Aves Studio LLC. Once cured, I've begun refining each using dental tools and fine-grit sandpaper. Hope to have them at a full shine similar to the top set of teeth soon.
I still have to sculpt the gum line for the lower teeth and the pallet will eventually be set deeper into the lower mandible than what you see here. Many adjustments will be made after castings are made. Then additional casts will be made.
Do the top and bottom teeth line up? Close but not really - not too concerned with that since my sculpt will feature multiple head sculpts and not a jointed jaw. So perfect alignment isn't a priority here...although I will do my best to get it as close as possible before making molds.
The Egg Morpher
Began filling the detail to the back "pipes" of the beast. I've also begun the sculpt of the creature's hands which will be very similar to the Giger Alien hands but larger. The rough sculpt right now resemble Bugs Bunny gloves and not that of the nightmarish xenomorph but no worries, that will all change....just how I work.
Hope you enjoyed the updates!!! Trying to get an update knocked out each week. If not, every other week for sure with updates in between.
Questions are welcome! Thanks again!
#alien #aliens #queen #hive #alienhive #eggmorpher #nostromo #sulaco #lv426 #aves #avesstudio #avesfixit #fox #stanwinston #studioadi #art #sculpting #customactionfigure studioADI Stan Winston Stan Winston School of Character Arts
Sculpt update on the NEWBORN - Alien: Resurrection - 1:18 scale. Sculpt using Aves FIXIT Sculpt by Aves Studio LLC
Sculpted hips and began working the upper arms.
Realized I need to thin out the lower back a bit and complete some detail just behind the shoulders before I can replicate (mold/cast) and head on to the next stage. Loving the elongated arms of this beast....
At this point with the project, I have pretty much caught up to the point where I left off with the Covenant Xenomorph, Neomorph and Defiance Praetorian - arms and legs. So expect a variety of updates, not JUST the Newborn from this point forward.
More updates to come! Perhaps some Star Wars updates soon? Bringing some back to the workbench. #alien #alienresurrection #newborn #ripley8 #studioadi #sculpture #avesfixit #avesstudio studioADI
Sculpt update on the Alien Queen - ALIENS - 1:18 scale.
Sculpted using Aves FIXIT Sculpt from Aves Studio.
I'm close to completing the mouth of the Alien Queen - finished sculpting the lower gum line around the teeth of the lower jaw. Also started to flesh out the lower jaw a bit but have much more detailing to add before it's considered complete.
Both the top and lower set of teeth have been sculpted separate and will be cast eventually using a semi-clear resin..or crystal clear, and painted afterward.
This coming week I want to complete the teeth and lower jaw and set up the components to the head for molding and casting. From there we go to the neck as well as the Queen's inner jaw.
More to come! Thanks for taking a look! #alien #aliens #alienqueen #egglayer #yourhighness #xenomorph #customactionfigure #art #sculpture #giger studioADI #studioadi
Sculpt progress on the Newborn - Alien: Resurrection - 1:18 scale. Sculpt made entirely from Aves FIXIT Sculpt by Aves Studio LLC
I said "entirely" because it's the first figure I have created so far in which I haven't used a frame of any kind to sculpt upon. Total FIXIT with a little weight to it - makes it feel expensive LOL! I need to do a scale shot to show how it scales to my 3.75" figures in the series.
Working on completing the lower abdomen of the creature, which will connect via a ball socket to the upper torso...that comes later in the casting phase. Right now, all the parts will be connected via wire or wax clay. Haven't completed the back section of the lower abdomen yet.
Next step after finishing the lower abdomen will be the upper arms and the hips. I plan on tooling the arms with traditional shoulder joints with the hips being connected via ball sockets. This can all change as the sculpt progresses.
Hope you all enjoy the update. More to come! #newborn #alienresurrection #miniature #customactionfigure #alien #adi #studioadi
Sculpt update on The Queen - Aliens (86) - and the Egg Morpher - Aliens: Defiance - Dark Horse Comics. Both 1:18 scale.
The Queen
Completed the rough sculpt of the lower mandible and teeth. The lower mandible is a skeletal sculpt for the moment while I adjust and refine the teeth. After the lower teeth are complete, flesh detail will be added to the mandible.
The teeth are being sculpted on a separate pallet, so when completed can have a mold made and cast in clear resin. The teeth are individually sculpted using Aves FIXIT sculpt, a two-part epoxy from Aves Studio LLC. Once cured, I've begun refining each using dental tools and fine-grit sandpaper. Hope to have them at a full shine similar to the top set of teeth soon.
I still have to sculpt the gum line for the lower teeth and the pallet will eventually be set deeper into the lower mandible than what you see here. Many adjustments will be made after castings are made. Then additional casts will be made.
Do the top and bottom teeth line up? Close but not really - not too concerned with that since my sculpt will feature multiple head sculpts and not a jointed jaw. So perfect alignment isn't a priority here...although I will do my best to get it as close as possible before making molds.
The Egg Morpher
Began filling the detail to the back "pipes" of the beast. I've also begun the sculpt of the creature's hands which will be very similar to the Giger Alien hands but larger. The rough sculpt right now resemble Bugs Bunny gloves and not that of the nightmarish xenomorph but no worries, that will all change....just how I work.
Hope you enjoyed the updates!!! Trying to get an update knocked out each week. If not, every other week for sure with updates in between.
Questions are welcome! Thanks again!
#alien #aliens #queen #hive #alienhive #eggmorpher #nostromo #sulaco #lv426 #aves #avesstudio #avesfixit #fox #stanwinston #studioadi #art #sculpting #customactionfigure studioADI Stan Winston Stan Winston School of Character Arts
Completed 1:18 scaled bust of the Alien: Resurrection Newborn Alien, that will be presented to French Film Director Jean-Pierre Jeunet, to be placed on display during the Caro/Jeunet Expo at The Musée Miniature et Cinéma in Lyon, France starting this October, 2018.
Hand sculpted using Aves FIXIT Sculpt and brush painted with acrylics.
#aliens #alien #aliennewborn #studiadi #miniature #jeanpierrejeunet #art #sculpture #painting #museum
Musée Miniature et Cinéma
Aves Studio LLC
studioADI
20th Century Fox
Sculpt update on The Queen - Aliens (86) - and the Egg Morpher - Aliens: Defiance - Dark Horse Comics. Both 1:18 scale.
The Queen
Completed the rough sculpt of the lower mandible and teeth. The lower mandible is a skeletal sculpt for the moment while I adjust and refine the teeth. After the lower teeth are complete, flesh detail will be added to the mandible.
The teeth are being sculpted on a separate pallet, so when completed can have a mold made and cast in clear resin. The teeth are individually sculpted using Aves FIXIT sculpt, a two-part epoxy from Aves Studio LLC. Once cured, I've begun refining each using dental tools and fine-grit sandpaper. Hope to have them at a full shine similar to the top set of teeth soon.
I still have to sculpt the gum line for the lower teeth and the pallet will eventually be set deeper into the lower mandible than what you see here. Many adjustments will be made after castings are made. Then additional casts will be made.
Do the top and bottom teeth line up? Close but not really - not too concerned with that since my sculpt will feature multiple head sculpts and not a jointed jaw. So perfect alignment isn't a priority here...although I will do my best to get it as close as possible before making molds.
The Egg Morpher
Began filling the detail to the back "pipes" of the beast. I've also begun the sculpt of the creature's hands which will be very similar to the Giger Alien hands but larger. The rough sculpt right now resemble Bugs Bunny gloves and not that of the nightmarish xenomorph but no worries, that will all change....just how I work.
Hope you enjoyed the updates!!! Trying to get an update knocked out each week. If not, every other week for sure with updates in between.
Questions are welcome! Thanks again!
#alien #aliens #queen #hive #alienhive #eggmorpher #nostromo #sulaco #lv426 #aves #avesstudio #avesfixit #fox #stanwinston #studioadi #art #sculpting #customactionfigure studioADI Stan Winston Stan Winston School of Character Arts
Sculpt update on The Queen - Aliens (86) - and the Egg Morpher - Aliens: Defiance - Dark Horse Comics. Both 1:18 scale.
The Queen
Completed the rough sculpt of the lower mandible and teeth. The lower mandible is a skeletal sculpt for the moment while I adjust and refine the teeth. After the lower teeth are complete, flesh detail will be added to the mandible.
The teeth are being sculpted on a separate pallet, so when completed can have a mold made and cast in clear resin. The teeth are individually sculpted using Aves FIXIT sculpt, a two-part epoxy from Aves Studio LLC. Once cured, I've begun refining each using dental tools and fine-grit sandpaper. Hope to have them at a full shine similar to the top set of teeth soon.
I still have to sculpt the gum line for the lower teeth and the pallet will eventually be set deeper into the lower mandible than what you see here. Many adjustments will be made after castings are made. Then additional casts will be made.
Do the top and bottom teeth line up? Close but not really - not too concerned with that since my sculpt will feature multiple head sculpts and not a jointed jaw. So perfect alignment isn't a priority here...although I will do my best to get it as close as possible before making molds.
The Egg Morpher
Began filling the detail to the back "pipes" of the beast. I've also begun the sculpt of the creature's hands which will be very similar to the Giger Alien hands but larger. The rough sculpt right now resemble Bugs Bunny gloves and not that of the nightmarish xenomorph but no worries, that will all change....just how I work.
Hope you enjoyed the updates!!! Trying to get an update knocked out each week. If not, every other week for sure with updates in between.
Questions are welcome! Thanks again!
#alien #aliens #queen #hive #alienhive #eggmorpher #nostromo #sulaco #lv426 #aves #avesstudio #avesfixit #fox #stanwinston #studioadi #art #sculpting #customactionfigure studioADI Stan Winston Stan Winston School of Character Arts
Sculpt update on the Alien Queen - ALIENS - 1:18 scale.
Sculpted using Aves FIXIT Sculpt from Aves Studio.
I'm close to completing the mouth of the Alien Queen - finished sculpting the lower gum line around the teeth of the lower jaw. Also started to flesh out the lower jaw a bit but have much more detailing to add before it's considered complete.
Both the top and lower set of teeth have been sculpted separate and will be cast eventually using a semi-clear resin..or crystal clear, and painted afterward.
This coming week I want to complete the teeth and lower jaw and set up the components to the head for molding and casting. From there we go to the neck as well as the Queen's inner jaw.
More to come! Thanks for taking a look! #alien #aliens #alienqueen #egglayer #yourhighness #xenomorph #customactionfigure #art #sculpture #giger studioADI #studioadi
Sculpt update on The Newborn. Alien: Resurrection - 1:18 scale.
The many faces of the "butterfly".
Got some patching to do then each of these will have molds made.
I still have one more version to do before I return to sculpting the limbs. I want to do a "birth" version of the head turned up which will require a redo of the cranium sculpt, including neck and shoulders.
I have a build itch that's needing to be scratched so expect a return to the Nostromo build soon.
Had a muscle injury to deal with that put me out over the past week or so but back at it! More to come!!!
#alien #alienresurrection #newbornalien #sculpting #art #monsters #avesstudio #FIXITsculpt #studioadi #customactionfigure
Sculpt progress on the Newborn - Alien: Resurrection - 1:18 scale. Sculpt made entirely from Aves FIXIT Sculpt by Aves Studio LLC
I said "entirely" because it's the first figure I have created so far in which I haven't used a frame of any kind to sculpt upon. Total FIXIT with a little weight to it - makes it feel expensive LOL! I need to do a scale shot to show how it scales to my 3.75" figures in the series.
Working on completing the lower abdomen of the creature, which will connect via a ball socket to the upper torso...that comes later in the casting phase. Right now, all the parts will be connected via wire or wax clay. Haven't completed the back section of the lower abdomen yet.
Next step after finishing the lower abdomen will be the upper arms and the hips. I plan on tooling the arms with traditional shoulder joints with the hips being connected via ball sockets. This can all change as the sculpt progresses.
Hope you all enjoy the update. More to come! #newborn #alienresurrection #miniature #customactionfigure #alien #adi #studioadi
Sculpt progress on the Newborn - Alien: Resurrection - 1:18 scale. Sculpt made entirely from Aves FIXIT Sculpt by Aves Studio LLC
I said "entirely" because it's the first figure I have created so far in which I haven't used a frame of any kind to sculpt upon. Total FIXIT with a little weight to it - makes it feel expensive LOL! I need to do a scale shot to show how it scales to my 3.75" figures in the series.
Working on completing the lower abdomen of the creature, which will connect via a ball socket to the upper torso...that comes later in the casting phase. Right now, all the parts will be connected via wire or wax clay. Haven't completed the back section of the lower abdomen yet.
Next step after finishing the lower abdomen will be the upper arms and the hips. I plan on tooling the arms with traditional shoulder joints with the hips being connected via ball sockets. This can all change as the sculpt progresses.
Hope you all enjoy the update. More to come! #newborn #alienresurrection #miniature #customactionfigure #alien #adi #studioadi
Sculpt progress on the Newborn - Alien: Resurrection - 1:18 scale. Sculpt using Aves FIXIT Sculpt from Aves Studio LLC.
Looks kind like a bust doesn't it...not a bad idea. Still, it's only the buildup of the upper torso. I will be sculpting detail once a needled it down a bit more. Then will come the lower abdomen, arms. legs etc.
The upper torso and head will be one piece. Just don't have the tech available to create an articulated neck that works with this sculpt. If anything it would have been a rubber sheath that would drape over and articulated frame.
Different expressions are also in the works. Sculpting tails for the other xenos at this time and a tongue for this beast.
More to come!!! #alien #alienresurrection #newborn #ripley8 #clone #sculpture #miniature #avesfixitsculpt #avesstudio
Sculpt update on The Queen - Aliens (86) - and the Egg Morpher - Aliens: Defiance - Dark Horse Comics. Both 1:18 scale.
The Queen
Completed the rough sculpt of the lower mandible and teeth. The lower mandible is a skeletal sculpt for the moment while I adjust and refine the teeth. After the lower teeth are complete, flesh detail will be added to the mandible.
The teeth are being sculpted on a separate pallet, so when completed can have a mold made and cast in clear resin. The teeth are individually sculpted using Aves FIXIT sculpt, a two-part epoxy from Aves Studio LLC. Once cured, I've begun refining each using dental tools and fine-grit sandpaper. Hope to have them at a full shine similar to the top set of teeth soon.
I still have to sculpt the gum line for the lower teeth and the pallet will eventually be set deeper into the lower mandible than what you see here. Many adjustments will be made after castings are made. Then additional casts will be made.
Do the top and bottom teeth line up? Close but not really - not too concerned with that since my sculpt will feature multiple head sculpts and not a jointed jaw. So perfect alignment isn't a priority here...although I will do my best to get it as close as possible before making molds.
The Egg Morpher
Began filling the detail to the back "pipes" of the beast. I've also begun the sculpt of the creature's hands which will be very similar to the Giger Alien hands but larger. The rough sculpt right now resemble Bugs Bunny gloves and not that of the nightmarish xenomorph but no worries, that will all change....just how I work.
Hope you enjoyed the updates!!! Trying to get an update knocked out each week. If not, every other week for sure with updates in between.
Questions are welcome! Thanks again!
#alien #aliens #queen #hive #alienhive #eggmorpher #nostromo #sulaco #lv426 #aves #avesstudio #avesfixit #fox #stanwinston #studioadi #art #sculpting #customactionfigure studioADI Stan Winston Stan Winston School of Character Arts
Sculpt update on the Queen. ALIENS (86) - 1:18 scale. Work in progress.
Began sculpting the teeth. More precise, the maxillary teeth (upper jaw). First I built the upper maxilla that will fit separately in the head, marking each point where the teeth will be inserted. What I love about FIXIT is that during it's final hour of curing, you can carefully shape pieces to fit other parts of the sculpt without it permanently attaching or curing to that particular part. Example, the maxilla which I shaped to fit the roof of the mouth. This will help in molding and replication later.
Next was to sculpt each tooth, two at a time, one on either side. Once fully cured, I carve the teeth into shape using dental tools, giving them the appearance of settling into the gum line of the maxilla. So this process of sculpting, curing, carving took a good week to complete.
While that was going on I sculpting more detail to the head, This version will feature the lips fully extended, mouth fully drawn taut. I intend to do another version of the head having the mouth partially closed and relaxed.
Still refining the teeth. I need to fill in some spots and reduce others. Then I will add gum tissue around each tooth. This piece will later be cast in clear resin so I may have the teeth appear to be translucent.
More to come!! Will begin working on the lower jaw soon then back to other projects that deserve some attention.
#alien #aliens #thequeen #egglayer #lv426 #sculpture #teeth #art #customactionfigure #avesfixitsculpt #avesstudio #studioadi #stanwinston Stan Winston studioADI
Sculpt update on the Queen. ALIENS (86) - 1:18 scale. Work in progress.
Began sculpting the teeth. More precise, the maxillary teeth (upper jaw). First I built the upper maxilla that will fit separately in the head, marking each point where the teeth will be inserted. What I love about FIXIT is that during it's final hour of curing, you can carefully shape pieces to fit other parts of the sculpt without it permanently attaching or curing to that particular part. Example, the maxilla which I shaped to fit the roof of the mouth. This will help in molding and replication later.
Next was to sculpt each tooth, two at a time, one on either side. Once fully cured, I carve the teeth into shape using dental tools, giving them the appearance of settling into the gum line of the maxilla. So this process of sculpting, curing, carving took a good week to complete.
While that was going on I sculpting more detail to the head, This version will feature the lips fully extended, mouth fully drawn taut. I intend to do another version of the head having the mouth partially closed and relaxed.
Still refining the teeth. I need to fill in some spots and reduce others. Then I will add gum tissue around each tooth. This piece will later be cast in clear resin so I may have the teeth appear to be translucent.
More to come!! Will begin working on the lower jaw soon then back to other projects that deserve some attention.
#alien #aliens #thequeen #egglayer #lv426 #sculpture #teeth #art #customactionfigure #avesfixitsculpt #avesstudio #studioadi #stanwinston Stan Winston studioADI
Sculpt update on the Queen. ALIENS (86) - 1:18 scale. Work in progress.
Began sculpting the teeth. More precise, the maxillary teeth (upper jaw). First I built the upper maxilla that will fit separately in the head, marking each point where the teeth will be inserted. What I love about FIXIT is that during it's final hour of curing, you can carefully shape pieces to fit other parts of the sculpt without it permanently attaching or curing to that particular part. Example, the maxilla which I shaped to fit the roof of the mouth. This will help in molding and replication later.
Next was to sculpt each tooth, two at a time, one on either side. Once fully cured, I carve the teeth into shape using dental tools, giving them the appearance of settling into the gum line of the maxilla. So this process of sculpting, curing, carving took a good week to complete.
While that was going on I sculpting more detail to the head, This version will feature the lips fully extended, mouth fully drawn taut. I intend to do another version of the head having the mouth partially closed and relaxed.
Still refining the teeth. I need to fill in some spots and reduce others. Then I will add gum tissue around each tooth. This piece will later be cast in clear resin so I may have the teeth appear to be translucent.
More to come!! Will begin working on the lower jaw soon then back to other projects that deserve some attention.
#alien #aliens #thequeen #egglayer #lv426 #sculpture #teeth #art #customactionfigure #avesfixitsculpt #avesstudio #studioadi #stanwinston Stan Winston studioADI
Sculpt update on the Alien Queen - ALIENS - 1:18 scale.
Sculpted using Aves FIXIT Sculpt from Aves Studio.
I'm close to completing the mouth of the Alien Queen - finished sculpting the lower gum line around the teeth of the lower jaw. Also started to flesh out the lower jaw a bit but have much more detailing to add before it's considered complete.
Both the top and lower set of teeth have been sculpted separate and will be cast eventually using a semi-clear resin..or crystal clear, and painted afterward.
This coming week I want to complete the teeth and lower jaw and set up the components to the head for molding and casting. From there we go to the neck as well as the Queen's inner jaw.
More to come! Thanks for taking a look! #alien #aliens #alienqueen #egglayer #yourhighness #xenomorph #customactionfigure #art #sculpture #giger studioADI #studioadi
Began filling the detail to the back "pipes" of the beast. I've also begun the sculpt of the creature's hands which will be very similar to the Giger Alien hands but larger. The rough sculpt right now resemble Bugs Bunny gloves and not that of the nightmarish xenomorph but no worries, that will all change....just how I work.
Hope you enjoyed the updates!!! Trying to get an update knocked out each week. If not, every other week for sure with updates in between.
Questions are welcome! Thanks again!
#alien #aliens #queen #hive #alienhive #eggmorpher #nostromo #sulaco #lv426 #aves #avesstudio #avesfixit #fox #stanwinston #studioadi #art #sculpting #customactionfigure
Sculpt progress on the Newborn. Alien: Resurrection - 1:18 scale.
With the sculpt of the ALIENS(86) Queen in progress, I thought it would be fun to match her up with her future offspring thanks to Ripley 8 (going to have to be a fan to know what I'm talking about) and get a look at the scale. Once the lower jaw of the Queen is complete I will get a better idea but so far I think both scale pretty well with one another and enhances my hopes to one day have a Resurrection diorama featuring the "Birth of the Newborn". Till then, both stands on their own and both have a ton of work to have down before that road is crossed.
This update focuses in on the Newborn and it's open mouth variant I'm working on. My previous update featured the jaw wired into place. This week I'm sculpting in the gaps and detailing the optional tongue that will be held by a magnet.
From some of the early production images, the tongue appeared to have "buds" over its surface...possibly glads for smell and taste. A trait from Ripley's side of the family for sure. So I'm taking a blank tongue I formed using Aves FIXIT sculpt and detailing it with small portions of additional FIXIT forming the buds. The entire surface isn't covered in these glads so I need to pay attention as to not overdo the surface with these things LOL!
I know the Newborn doesn't get a ton of love from the Alien community but I must admit, it's been one of my more enjoyable projects over the past year or so...and I think it's because of the fusion between the human and the xenomorph. You get to work with a little of both when sculpting this guy....at least I don't have to sculpt a TAIL! LOL! That Queen though...the tail will be a major project in itself.
Hope you enjoyed the update. Any questions, let me know. Everything you see has been hand sculpted using Aves FIXIT Sculpt - a two-part epoxy that can be found here
Aves Studio LLC.
#avesstudio #aves #FIXIT #sculpture #sculpting #art #alien #aliennewborn #aliens #alienqueen #xenomorph #nostromo #alien79 #studioadi
Sculpt progress on the Newborn. Alien: Resurrection - 1:18 scale.
With the sculpt of the ALIENS(86) Queen in progress, I thought it would be fun to match her up with her future offspring thanks to Ripley 8 (going to have to be a fan to know what I'm talking about) and get a look at the scale. Once the lower jaw of the Queen is complete I will get a better idea but so far I think both scale pretty well with one another and enhances my hopes to one day have a Resurrection diorama featuring the "Birth of the Newborn". Till then, both stands on their own and both have a ton of work to have down before that road is crossed.
This update focuses in on the Newborn and it's open mouth variant I'm working on. My previous update featured the jaw wired into place. This week I'm sculpting in the gaps and detailing the optional tongue that will be held by a magnet.
From some of the early production images, the tongue appeared to have "buds" over its surface...possibly glads for smell and taste. A trait from Ripley's side of the family for sure. So I'm taking a blank tongue I formed using Aves FIXIT sculpt and detailing it with small portions of additional FIXIT forming the buds. The entire surface isn't covered in these glads so I need to pay attention as to not overdo the surface with these things LOL!
I know the Newborn doesn't get a ton of love from the Alien community but I must admit, it's been one of my more enjoyable projects over the past year or so...and I think it's because of the fusion between the human and the xenomorph. You get to work with a little of both when sculpting this guy....at least I don't have to sculpt a TAIL! LOL! That Queen though...the tail will be a major project in itself.
Hope you enjoyed the update. Any questions, let me know. Everything you see has been hand sculpted using Aves FIXIT Sculpt - a two-part epoxy that can be found here
Aves Studio LLC.
#avesstudio #aves #FIXIT #sculpture #sculpting #art #alien #aliennewborn #aliens #alienqueen #xenomorph #nostromo #alien79 #studioadi
Sculpt update on The Queen - Aliens (86) - and the Egg Morpher - Aliens: Defiance - Dark Horse Comics. Both 1:18 scale.
The Queen
Completed the rough sculpt of the lower mandible and teeth. The lower mandible is a skeletal sculpt for the moment while I adjust and refine the teeth. After the lower teeth are complete, flesh detail will be added to the mandible.
The teeth are being sculpted on a separate pallet, so when completed can have a mold made and cast in clear resin. The teeth are individually sculpted using Aves FIXIT sculpt, a two-part epoxy from Aves Studio LLC. Once cured, I've begun refining each using dental tools and fine-grit sandpaper. Hope to have them at a full shine similar to the top set of teeth soon.
I still have to sculpt the gum line for the lower teeth and the pallet will eventually be set deeper into the lower mandible than what you see here. Many adjustments will be made after castings are made. Then additional casts will be made.
Do the top and bottom teeth line up? Close but not really - not too concerned with that since my sculpt will feature multiple head sculpts and not a jointed jaw. So perfect alignment isn't a priority here...although I will do my best to get it as close as possible before making molds.
The Egg Morpher
Began filling the detail to the back "pipes" of the beast. I've also begun the sculpt of the creature's hands which will be very similar to the Giger Alien hands but larger. The rough sculpt right now resemble Bugs Bunny gloves and not that of the nightmarish xenomorph but no worries, that will all change....just how I work.
Hope you enjoyed the updates!!! Trying to get an update knocked out each week. If not, every other week for sure with updates in between.
Questions are welcome! Thanks again!
#alien #aliens #queen #hive #alienhive #eggmorpher #nostromo #sulaco #lv426 #aves #avesstudio #avesfixit #fox #stanwinston #studioadi #art #sculpting #customactionfigure studioADI Stan Winston Stan Winston School of Character Arts
Mold building a bit tonight. It can be a complicated process no matter how large or small the piece is you're wanting to replicate. Worth the effort if you don't like wasting money and want to get it right the FIRST time. #moldmaking #investment
Sculpt update on The Queen - Aliens (86) - and the Egg Morpher - Aliens: Defiance - Dark Horse Comics. Both 1:18 scale.
The Queen
Completed the rough sculpt of the lower mandible and teeth. The lower mandible is a skeletal sculpt for the moment while I adjust and refine the teeth. After the lower teeth are complete, flesh detail will be added to the mandible.
The teeth are being sculpted on a separate pallet, so when completed can have a mold made and cast in clear resin. The teeth are individually sculpted using Aves FIXIT sculpt, a two-part epoxy from Aves Studio LLC. Once cured, I've begun refining each using dental tools and fine-grit sandpaper. Hope to have them at a full shine similar to the top set of teeth soon.
I still have to sculpt the gum line for the lower teeth and the pallet will eventually be set deeper into the lower mandible than what you see here. Many adjustments will be made after castings are made. Then additional casts will be made.
Do the top and bottom teeth line up? Close but not really - not too concerned with that since my sculpt will feature multiple head sculpts and not a jointed jaw. So perfect alignment isn't a priority here...although I will do my best to get it as close as possible before making molds.
The Egg Morpher
Began filling the detail to the back "pipes" of the beast. I've also begun the sculpt of the creature's hands which will be very similar to the Giger Alien hands but larger. The rough sculpt right now resemble Bugs Bunny gloves and not that of the nightmarish xenomorph but no worries, that will all change....just how I work.
Hope you enjoyed the updates!!! Trying to get an update knocked out each week. If not, every other week for sure with updates in between.
Questions are welcome! Thanks again!
#alien #aliens #queen #hive #alienhive #eggmorpher #nostromo #sulaco #lv426 #aves #avesstudio #avesfixit #fox #stanwinston #studioadi #art #sculpting #customactionfigure studioADI Stan Winston Stan Winston School of Character Arts
Sculpt update on The Queen - Aliens (86) - and the Egg Morpher - Aliens: Defiance - Dark Horse Comics. Both 1:18 scale.
The Queen
Completed the rough sculpt of the lower mandible and teeth. The lower mandible is a skeletal sculpt for the moment while I adjust and refine the teeth. After the lower teeth are complete, flesh detail will be added to the mandible.
The teeth are being sculpted on a separate pallet, so when completed can have a mold made and cast in clear resin. The teeth are individually sculpted using Aves FIXIT sculpt, a two-part epoxy from Aves Studio LLC. Once cured, I've begun refining each using dental tools and fine-grit sandpaper. Hope to have them at a full shine similar to the top set of teeth soon.
I still have to sculpt the gum line for the lower teeth and the pallet will eventually be set deeper into the lower mandible than what you see here. Many adjustments will be made after castings are made. Then additional casts will be made.
Do the top and bottom teeth line up? Close but not really - not too concerned with that since my sculpt will feature multiple head sculpts and not a jointed jaw. So perfect alignment isn't a priority here...although I will do my best to get it as close as possible before making molds.
The Egg Morpher
Began filling the detail to the back "pipes" of the beast. I've also begun the sculpt of the creature's hands which will be very similar to the Giger Alien hands but larger. The rough sculpt right now resemble Bugs Bunny gloves and not that of the nightmarish xenomorph but no worries, that will all change....just how I work.
Hope you enjoyed the updates!!! Trying to get an update knocked out each week. If not, every other week for sure with updates in between.
Questions are welcome! Thanks again!
#alien #aliens #queen #hive #alienhive #eggmorpher #nostromo #sulaco #lv426 #aves #avesstudio #avesfixit #fox #stanwinston #studioadi #art #sculpting #customactionfigure studioADI Stan Winston Stan Winston School of Character Arts
Sculpt update on The Queen - Aliens (86) - and the Egg Morpher - Aliens: Defiance - Dark Horse Comics. Both 1:18 scale.
The Queen
Completed the rough sculpt of the lower mandible and teeth. The lower mandible is a skeletal sculpt for the moment while I adjust and refine the teeth. After the lower teeth are complete, flesh detail will be added to the mandible.
The teeth are being sculpted on a separate pallet, so when completed can have a mold made and cast in clear resin. The teeth are individually sculpted using Aves FIXIT sculpt, a two-part epoxy from Aves Studio LLC. Once cured, I've begun refining each using dental tools and fine-grit sandpaper. Hope to have them at a full shine similar to the top set of teeth soon.
I still have to sculpt the gum line for the lower teeth and the pallet will eventually be set deeper into the lower mandible than what you see here. Many adjustments will be made after castings are made. Then additional casts will be made.
Do the top and bottom teeth line up? Close but not really - not too concerned with that since my sculpt will feature multiple head sculpts and not a jointed jaw. So perfect alignment isn't a priority here...although I will do my best to get it as close as possible before making molds.
The Egg Morpher
Began filling the detail to the back "pipes" of the beast. I've also begun the sculpt of the creature's hands which will be very similar to the Giger Alien hands but larger. The rough sculpt right now resemble Bugs Bunny gloves and not that of the nightmarish xenomorph but no worries, that will all change....just how I work.
Hope you enjoyed the updates!!! Trying to get an update knocked out each week. If not, every other week for sure with updates in between.
Questions are welcome! Thanks again!
#alien #aliens #queen #hive #alienhive #eggmorpher #nostromo #sulaco #lv426 #aves #avesstudio #avesfixit #fox #stanwinston #studioadi #art #sculpting #customactionfigure studioADI Stan Winston Stan Winston School of Character Arts
Sculpt progress on the Newborn - Alien: Resurrection - 1:18 scale. Sculpt using Aves FIXIT Sculpt by Aves Studio LLC
Began sculpting detail to the upper torso as well as building the shape to the lower half. The main articulation point in therein body will be a ball joint just below the ribcage separating the upper/lower torso. Finer details have not been added yet - I work in stages when sculpting with epoxy since it usually only has a 4 hour cure time.
Hope you enjoy the new work in progress pics. More project updates coming soon. #alien #alienresurrection #newborn #miniature #customactionfigure #avesfixitsculpt #sculpture #ripley8 #studioadi studioADI
Sculpt update on the NEWBORN - Alien: Resurrection - 1:18 scale. Sculpt using Aves FIXIT Sculpt by Aves Studio LLC
Sculpted hips and began working the upper arms.
Realized I need to thin out the lower back a bit and complete some detail just behind the shoulders before I can replicate (mold/cast) and head on to the next stage. Loving the elongated arms of this beast....
At this point with the project, I have pretty much caught up to the point where I left off with the Covenant Xenomorph, Neomorph and Defiance Praetorian - arms and legs. So expect a variety of updates, not JUST the Newborn from this point forward.
More updates to come! Perhaps some Star Wars updates soon? Bringing some back to the workbench. #alien #alienresurrection #newborn #ripley8 #studioadi #sculpture #avesfixit #avesstudio studioADI
Sculpt update on The Queen - Aliens (86) - and the Egg Morpher - Aliens: Defiance - Dark Horse Comics. Both 1:18 scale.
The Queen
Completed the rough sculpt of the lower mandible and teeth. The lower mandible is a skeletal sculpt for the moment while I adjust and refine the teeth. After the lower teeth are complete, flesh detail will be added to the mandible.
The teeth are being sculpted on a separate pallet, so when completed can have a mold made and cast in clear resin. The teeth are individually sculpted using Aves FIXIT sculpt, a two-part epoxy from Aves Studio LLC. Once cured, I've begun refining each using dental tools and fine-grit sandpaper. Hope to have them at a full shine similar to the top set of teeth soon.
I still have to sculpt the gum line for the lower teeth and the pallet will eventually be set deeper into the lower mandible than what you see here. Many adjustments will be made after castings are made. Then additional casts will be made.
Do the top and bottom teeth line up? Close but not really - not too concerned with that since my sculpt will feature multiple head sculpts and not a jointed jaw. So perfect alignment isn't a priority here...although I will do my best to get it as close as possible before making molds.
The Egg Morpher
Began filling the detail to the back "pipes" of the beast. I've also begun the sculpt of the creature's hands which will be very similar to the Giger Alien hands but larger. The rough sculpt right now resemble Bugs Bunny gloves and not that of the nightmarish xenomorph but no worries, that will all change....just how I work.
Hope you enjoyed the updates!!! Trying to get an update knocked out each week. If not, every other week for sure with updates in between.
Questions are welcome! Thanks again!
#alien #aliens #queen #hive #alienhive #eggmorpher #nostromo #sulaco #lv426 #aves #avesstudio #avesfixit #fox #stanwinston #studioadi #art #sculpting #customactionfigure studioADI Stan Winston Stan Winston School of Character Arts
Sculpt update on The Queen - Aliens (86) - and the Egg Morpher - Aliens: Defiance - Dark Horse Comics. Both 1:18 scale.
The Queen
Completed the rough sculpt of the lower mandible and teeth. The lower mandible is a skeletal sculpt for the moment while I adjust and refine the teeth. After the lower teeth are complete, flesh detail will be added to the mandible.
The teeth are being sculpted on a separate pallet, so when completed can have a mold made and cast in clear resin. The teeth are individually sculpted using Aves FIXIT sculpt, a two-part epoxy from Aves Studio LLC. Once cured, I've begun refining each using dental tools and fine-grit sandpaper. Hope to have them at a full shine similar to the top set of teeth soon.
I still have to sculpt the gum line for the lower teeth and the pallet will eventually be set deeper into the lower mandible than what you see here. Many adjustments will be made after castings are made. Then additional casts will be made.
Do the top and bottom teeth line up? Close but not really - not too concerned with that since my sculpt will feature multiple head sculpts and not a jointed jaw. So perfect alignment isn't a priority here...although I will do my best to get it as close as possible before making molds.
The Egg Morpher
Began filling the detail to the back "pipes" of the beast. I've also begun the sculpt of the creature's hands which will be very similar to the Giger Alien hands but larger. The rough sculpt right now resemble Bugs Bunny gloves and not that of the nightmarish xenomorph but no worries, that will all change....just how I work.
Hope you enjoyed the updates!!! Trying to get an update knocked out each week. If not, every other week for sure with updates in between.
Questions are welcome! Thanks again!
#alien #aliens #queen #hive #alienhive #eggmorpher #nostromo #sulaco #lv426 #aves #avesstudio #avesfixit #fox #stanwinston #studioadi #art #sculpting #customactionfigure studioADI Stan Winston Stan Winston School of Character Arts
Sculpt update on the Queen. ALIENS (86) - 1:18 scale. Work in progress.
Began sculpting the teeth. More precise, the maxillary teeth (upper jaw). First I built the upper maxilla that will fit separately in the head, marking each point where the teeth will be inserted. What I love about FIXIT is that during it's final hour of curing, you can carefully shape pieces to fit other parts of the sculpt without it permanently attaching or curing to that particular part. Example, the maxilla which I shaped to fit the roof of the mouth. This will help in molding and replication later.
Next was to sculpt each tooth, two at a time, one on either side. Once fully cured, I carve the teeth into shape using dental tools, giving them the appearance of settling into the gum line of the maxilla. So this process of sculpting, curing, carving took a good week to complete.
While that was going on I sculpting more detail to the head, This version will feature the lips fully extended, mouth fully drawn taut. I intend to do another version of the head having the mouth partially closed and relaxed.
Still refining the teeth. I need to fill in some spots and reduce others. Then I will add gum tissue around each tooth. This piece will later be cast in clear resin so I may have the teeth appear to be translucent.
More to come!! Will begin working on the lower jaw soon then back to other projects that deserve some attention.
#alien #aliens #thequeen #egglayer #lv426 #sculpture #teeth #art #customactionfigure #avesfixitsculpt #avesstudio #studioadi #stanwinston Stan Winston studioADI
Sculpt update on The Queen - Aliens (86) - and the Egg Morpher - Aliens: Defiance - Dark Horse Comics. Both 1:18 scale.
The Queen
Completed the rough sculpt of the lower mandible and teeth. The lower mandible is a skeletal sculpt for the moment while I adjust and refine the teeth. After the lower teeth are complete, flesh detail will be added to the mandible.
The teeth are being sculpted on a separate pallet, so when completed can have a mold made and cast in clear resin. The teeth are individually sculpted using Aves FIXIT sculpt, a two-part epoxy from Aves Studio LLC. Once cured, I've begun refining each using dental tools and fine-grit sandpaper. Hope to have them at a full shine similar to the top set of teeth soon.
I still have to sculpt the gum line for the lower teeth and the pallet will eventually be set deeper into the lower mandible than what you see here. Many adjustments will be made after castings are made. Then additional casts will be made.
Do the top and bottom teeth line up? Close but not really - not too concerned with that since my sculpt will feature multiple head sculpts and not a jointed jaw. So perfect alignment isn't a priority here...although I will do my best to get it as close as possible before making molds.
The Egg Morpher
Began filling the detail to the back "pipes" of the beast. I've also begun the sculpt of the creature's hands which will be very similar to the Giger Alien hands but larger. The rough sculpt right now resemble Bugs Bunny gloves and not that of the nightmarish xenomorph but no worries, that will all change....just how I work.
Hope you enjoyed the updates!!! Trying to get an update knocked out each week. If not, every other week for sure with updates in between.
Questions are welcome! Thanks again!
#alien #aliens #queen #hive #alienhive #eggmorpher #nostromo #sulaco #lv426 #aves #avesstudio #avesfixit #fox #stanwinston #studioadi #art #sculpting #customactionfigure studioADI Stan Winston Stan Winston School of Character Arts
Sculpt update on The Queen - Aliens (86) - and the Egg Morpher - Aliens: Defiance - Dark Horse Comics. Both 1:18 scale.
The Queen
Completed the rough sculpt of the lower mandible and teeth. The lower mandible is a skeletal sculpt for the moment while I adjust and refine the teeth. After the lower teeth are complete, flesh detail will be added to the mandible.
The teeth are being sculpted on a separate pallet, so when completed can have a mold made and cast in clear resin. The teeth are individually sculpted using Aves FIXIT sculpt, a two-part epoxy from Aves Studio LLC. Once cured, I've begun refining each using dental tools and fine-grit sandpaper. Hope to have them at a full shine similar to the top set of teeth soon.
I still have to sculpt the gum line for the lower teeth and the pallet will eventually be set deeper into the lower mandible than what you see here. Many adjustments will be made after castings are made. Then additional casts will be made.
Do the top and bottom teeth line up? Close but not really - not too concerned with that since my sculpt will feature multiple head sculpts and not a jointed jaw. So perfect alignment isn't a priority here...although I will do my best to get it as close as possible before making molds.
The Egg Morpher
Began filling the detail to the back "pipes" of the beast. I've also begun the sculpt of the creature's hands which will be very similar to the Giger Alien hands but larger. The rough sculpt right now resemble Bugs Bunny gloves and not that of the nightmarish xenomorph but no worries, that will all change....just how I work.
Hope you enjoyed the updates!!! Trying to get an update knocked out each week. If not, every other week for sure with updates in between.
Questions are welcome! Thanks again!
#alien #aliens #queen #hive #alienhive #eggmorpher #nostromo #sulaco #lv426 #aves #avesstudio #avesfixit #fox #stanwinston #studioadi #art #sculpting #customactionfigure studioADI Stan Winston Stan Winston School of Character Arts
Sculpt update on the Queen. ALIENS (86) - 1:18 scale. Work in progress.
Began sculpting the teeth. More precise, the maxillary teeth (upper jaw). First I built the upper maxilla that will fit separately in the head, marking each point where the teeth will be inserted. What I love about FIXIT is that during it's final hour of curing, you can carefully shape pieces to fit other parts of the sculpt without it permanently attaching or curing to that particular part. Example, the maxilla which I shaped to fit the roof of the mouth. This will help in molding and replication later.
Next was to sculpt each tooth, two at a time, one on either side. Once fully cured, I carve the teeth into shape using dental tools, giving them the appearance of settling into the gum line of the maxilla. So this process of sculpting, curing, carving took a good week to complete.
While that was going on I sculpting more detail to the head, This version will feature the lips fully extended, mouth fully drawn taut. I intend to do another version of the head having the mouth partially closed and relaxed.
Still refining the teeth. I need to fill in some spots and reduce others. Then I will add gum tissue around each tooth. This piece will later be cast in clear resin so I may have the teeth appear to be translucent.
More to come!! Will begin working on the lower jaw soon then back to other projects that deserve some attention.
#alien #aliens #thequeen #egglayer #lv426 #sculpture #teeth #art #customactionfigure #avesfixitsculpt #avesstudio #studioadi #stanwinston Stan Winston studioADI
Completed 1:18 scaled bust of the Alien: Resurrection Newborn Alien, that will be presented to French Film Director Jean-Pierre Jeunet, to be placed on display during the Caro/Jeunet Expo at The Musée Miniature et Cinéma in Lyon, France starting this October, 2018.
Hand sculpted using Aves FIXIT Sculpt and brush painted with acrylics.
#aliens #alien #aliennewborn #studiadi #miniature #jeanpierrejeunet #art #sculpture #painting #museum
Musée Miniature et Cinéma
Aves Studio LLC
studioADI
20th Century Fox
Sculpt update on the Queen. ALIENS (86) - 1:18 scale. Work in progress.
Began sculpting the teeth. More precise, the maxillary teeth (upper jaw). First I built the upper maxilla that will fit separately in the head, marking each point where the teeth will be inserted. What I love about FIXIT is that during it's final hour of curing, you can carefully shape pieces to fit other parts of the sculpt without it permanently attaching or curing to that particular part. Example, the maxilla which I shaped to fit the roof of the mouth. This will help in molding and replication later.
Next was to sculpt each tooth, two at a time, one on either side. Once fully cured, I carve the teeth into shape using dental tools, giving them the appearance of settling into the gum line of the maxilla. So this process of sculpting, curing, carving took a good week to complete.
While that was going on I sculpting more detail to the head, This version will feature the lips fully extended, mouth fully drawn taut. I intend to do another version of the head having the mouth partially closed and relaxed.
Still refining the teeth. I need to fill in some spots and reduce others. Then I will add gum tissue around each tooth. This piece will later be cast in clear resin so I may have the teeth appear to be translucent.
More to come!! Will begin working on the lower jaw soon then back to other projects that deserve some attention.
#alien #aliens #thequeen #egglayer #lv426 #sculpture #teeth #art #customactionfigure #avesfixitsculpt #avesstudio #studioadi #stanwinston Stan Winston studioADI
Mold building a bit tonight. It can be a complicated process no matter how large or small the piece is you're wanting to replicate. Worth the effort if you don't like wasting money and want to get it right the FIRST time. #moldmaking #investment
Completed 1:18 scaled bust of the Alien: Resurrection Newborn Alien, that will be presented to French Film Director Jean-Pierre Jeunet, to be placed on display during the Caro/Jeunet Expo at The Musée Miniature et Cinéma in Lyon, France starting this October, 2018.
Hand sculpted using Aves FIXIT Sculpt and brush painted with acrylics.
#aliens #alien #aliennewborn #studiadi #miniature #jeanpierrejeunet #art #sculpture #painting #museum
Musée Miniature et Cinéma
Aves Studio LLC
studioADI
20th Century Fox
Sculpt progress on the Newborn - Alien: Resurrection - 1:18 scale. Sculpt made entirely from Aves FIXIT Sculpt by Aves Studio LLC
I said "entirely" because it's the first figure I have created so far in which I haven't used a frame of any kind to sculpt upon. Total FIXIT with a little weight to it - makes it feel expensive LOL! I need to do a scale shot to show how it scales to my 3.75" figures in the series.
Working on completing the lower abdomen of the creature, which will connect via a ball socket to the upper torso...that comes later in the casting phase. Right now, all the parts will be connected via wire or wax clay. Haven't completed the back section of the lower abdomen yet.
Next step after finishing the lower abdomen will be the upper arms and the hips. I plan on tooling the arms with traditional shoulder joints with the hips being connected via ball sockets. This can all change as the sculpt progresses.
Hope you all enjoy the update. More to come! #newborn #alienresurrection #miniature #customactionfigure #alien #adi #studioadi
Sculpt update on the Queen. ALIENS (86) - 1:18 scale. Work in progress.
Began sculpting the teeth. More precise, the maxillary teeth (upper jaw). First I built the upper maxilla that will fit separately in the head, marking each point where the teeth will be inserted. What I love about FIXIT is that during it's final hour of curing, you can carefully shape pieces to fit other parts of the sculpt without it permanently attaching or curing to that particular part. Example, the maxilla which I shaped to fit the roof of the mouth. This will help in molding and replication later.
Next was to sculpt each tooth, two at a time, one on either side. Once fully cured, I carve the teeth into shape using dental tools, giving them the appearance of settling into the gum line of the maxilla. So this process of sculpting, curing, carving took a good week to complete.
While that was going on I sculpting more detail to the head, This version will feature the lips fully extended, mouth fully drawn taut. I intend to do another version of the head having the mouth partially closed and relaxed.
Still refining the teeth. I need to fill in some spots and reduce others. Then I will add gum tissue around each tooth. This piece will later be cast in clear resin so I may have the teeth appear to be translucent.
More to come!! Will begin working on the lower jaw soon then back to other projects that deserve some attention.
#alien #aliens #thequeen #egglayer #lv426 #sculpture #teeth #art #customactionfigure #avesfixitsculpt #avesstudio #studioadi #stanwinston Stan Winston studioADI
Sculpt update on the Queen. ALIENS (86) - 1:18 scale. Work in progress.
Began sculpting the teeth. More precise, the maxillary teeth (upper jaw). First I built the upper maxilla that will fit separately in the head, marking each point where the teeth will be inserted. What I love about FIXIT is that during it's final hour of curing, you can carefully shape pieces to fit other parts of the sculpt without it permanently attaching or curing to that particular part. Example, the maxilla which I shaped to fit the roof of the mouth. This will help in molding and replication later.
Next was to sculpt each tooth, two at a time, one on either side. Once fully cured, I carve the teeth into shape using dental tools, giving them the appearance of settling into the gum line of the maxilla. So this process of sculpting, curing, carving took a good week to complete.
While that was going on I sculpting more detail to the head, This version will feature the lips fully extended, mouth fully drawn taut. I intend to do another version of the head having the mouth partially closed and relaxed.
Still refining the teeth. I need to fill in some spots and reduce others. Then I will add gum tissue around each tooth. This piece will later be cast in clear resin so I may have the teeth appear to be translucent.
More to come!! Will begin working on the lower jaw soon then back to other projects that deserve some attention.
#alien #aliens #thequeen #egglayer #lv426 #sculpture #teeth #art #customactionfigure #avesfixitsculpt #avesstudio #studioadi #stanwinston Stan Winston studioADI
Sculpt progress on the Newborn - Alien: Resurrection - 1:18 scale. Sculpt using Aves FIXIT Sculpt from Aves Studio LLC.
Looks kind like a bust doesn't it...not a bad idea. Still, it's only the buildup of the upper torso. I will be sculpting detail once a needled it down a bit more. Then will come the lower abdomen, arms. legs etc.
The upper torso and head will be one piece. Just don't have the tech available to create an articulated neck that works with this sculpt. If anything it would have been a rubber sheath that would drape over and articulated frame.
Different expressions are also in the works. Sculpting tails for the other xenos at this time and a tongue for this beast.
More to come!!! #alien #alienresurrection #newborn #ripley8 #clone #sculpture #miniature #avesfixitsculpt #avesstudio
Began filling the detail to the back "pipes" of the beast. I've also begun the sculpt of the creature's hands which will be very similar to the Giger Alien hands but larger. The rough sculpt right now resemble Bugs Bunny gloves and not that of the nightmarish xenomorph but no worries, that will all change....just how I work.
Hope you enjoyed the updates!!! Trying to get an update knocked out each week. If not, every other week for sure with updates in between.
Questions are welcome! Thanks again!
#alien #aliens #queen #hive #alienhive #eggmorpher #nostromo #sulaco #lv426 #aves #avesstudio #avesfixit #fox #stanwinston #studioadi #art #sculpting #customactionfigure
Sculpt update on the Queen. ALIENS (86) - 1:18 scale. Work in progress.
Began sculpting the teeth. More precise, the maxillary teeth (upper jaw). First I built the upper maxilla that will fit separately in the head, marking each point where the teeth will be inserted. What I love about FIXIT is that during it's final hour of curing, you can carefully shape pieces to fit other parts of the sculpt without it permanently attaching or curing to that particular part. Example, the maxilla which I shaped to fit the roof of the mouth. This will help in molding and replication later.
Next was to sculpt each tooth, two at a time, one on either side. Once fully cured, I carve the teeth into shape using dental tools, giving them the appearance of settling into the gum line of the maxilla. So this process of sculpting, curing, carving took a good week to complete.
While that was going on I sculpting more detail to the head, This version will feature the lips fully extended, mouth fully drawn taut. I intend to do another version of the head having the mouth partially closed and relaxed.
Still refining the teeth. I need to fill in some spots and reduce others. Then I will add gum tissue around each tooth. This piece will later be cast in clear resin so I may have the teeth appear to be translucent.
More to come!! Will begin working on the lower jaw soon then back to other projects that deserve some attention.
#alien #aliens #thequeen #egglayer #lv426 #sculpture #teeth #art #customactionfigure #avesfixitsculpt #avesstudio #studioadi #stanwinston Stan Winston studioADI
Sculpt update on the Queen. ALIENS (86) - 1:18 scale. Work in progress.
Began sculpting the teeth. More precise, the maxillary teeth (upper jaw). First I built the upper maxilla that will fit separately in the head, marking each point where the teeth will be inserted. What I love about FIXIT is that during it's final hour of curing, you can carefully shape pieces to fit other parts of the sculpt without it permanently attaching or curing to that particular part. Example, the maxilla which I shaped to fit the roof of the mouth. This will help in molding and replication later.
Next was to sculpt each tooth, two at a time, one on either side. Once fully cured, I carve the teeth into shape using dental tools, giving them the appearance of settling into the gum line of the maxilla. So this process of sculpting, curing, carving took a good week to complete.
While that was going on I sculpting more detail to the head, This version will feature the lips fully extended, mouth fully drawn taut. I intend to do another version of the head having the mouth partially closed and relaxed.
Still refining the teeth. I need to fill in some spots and reduce others. Then I will add gum tissue around each tooth. This piece will later be cast in clear resin so I may have the teeth appear to be translucent.
More to come!! Will begin working on the lower jaw soon then back to other projects that deserve some attention.
#alien #aliens #thequeen #egglayer #lv426 #sculpture #teeth #art #customactionfigure #avesfixitsculpt #avesstudio #studioadi #stanwinston Stan Winston studioADI