I don't even remember how long ago now, but Snail Shell solicited a new product, Milk Tea Girl. I'd basically stopped buying anything from Snail Shell since the two pack, not so much because they're bad, but rather there really isn't much variation in the engineering, and the prices, while were fair, still were kind of higher than I'd want to spend.

Milk Tea Girl was around the usual price point, which is generally over $100 USD on Japanese sites, which really wasn't a problem in that they weren't exactly any cheaper even on Chinese based pages. So the price, coupled with the very bare bones content meant very easy pass.

Well, something must have happened, because in January 2023, I got bored and just poked around to find that all the non Japanese sites seemed to have a more reasonable price for the set, around $70 USD shipped, which puts it around Figuarts level. So I did what any normal person would do, and bit.

I'm certainly glad I didn't pay Japanese MSRP, or BBTS pricing for that matter because Milk Tea Girl is really bare bones. Most of the effort is on you - you get the fully finished figure of the lady herself, with two extra pairs of hands, an extra face, and a pair of feet that you swap out so you can use the included stand. Otherwise, the only other items that come with the set are a lithograph and various plastic model kit parts that are used to build her weaponry, both appearing to be paint guns of some sort using Boba Tea as its primary ammunition source.

The actual assembly of the models isn't horrible, but putting on those water decals is a true test of patience. I couldn't do them all - when the decals start getting smaller than the tip of a grain of sand, I tend to get a bit annoyed when I have to apply 20 of them.

I also didn't have plans to paint or seal this, so there's a very likely chance that every time I touch the weapons they're gonna lose a decal or two.

The actual figure itself is pretty typical for Snail Shell. You have very standard swivel/ball joints where you'd expect them on this type of body, which unfortunately means no waist articulation, which is great for the lines of her waist, but the ass cap ruins things in that area of the body. There's double jointed knees and elbows, along with pull down hips and shoulders, so you can do some decent stuff there. No articulation at the base of the neck though.

Like other Snail Shell figures, Milk Tea Girl also has adjustable eyeballs for further posing variations.

The body itself certainly looks great. I mean, she's a pin up model, so if she didn't look good it would mean the modelers failed at their job, though I wish they had opted for curvier hips. The Camel Toe also makes me cringe a bit - it's not the prude in me, but it just seems so pointless and is there for shock value.

Use of sun tanned skin is appropriate given the character. Paint work overall is acceptable. Snail Shel l isn't exactly known for their quality control - they're very much a new comer making their name known for value proposition.

I don't even remember how long ago now, but Snail Shell solicited a new product, Milk Tea Girl. I'd basically stopped buying anything from Snail Shell since the two pack, not so much because they're bad, but rather there really isn't much variation in the engineering, and the prices, while were fair, still were kind of higher than I'd want to spend.

Milk Tea Girl was around the usual price point, which is generally over $100 USD on Japanese sites, which really wasn't a problem in that they weren't exactly any cheaper even on Chinese based pages. So the price, coupled with the very bare bones content meant very easy pass.

Well, something must have happened, because in January 2023, I got bored and just poked around to find that all the non Japanese sites seemed to have a more reasonable price for the set, around $70 USD shipped, which puts it around Figuarts level. So I did what any normal person would do, and bit.

I'm certainly glad I didn't pay Japanese MSRP, or BBTS pricing for that matter because Milk Tea Girl is really bare bones. Most of the effort is on you - you get the fully finished figure of the lady herself, with two extra pairs of hands, an extra face, and a pair of feet that you swap out so you can use the included stand. Otherwise, the only other items that come with the set are a lithograph and various plastic model kit parts that are used to build her weaponry, both appearing to be paint guns of some sort using Boba Tea as its primary ammunition source.

The actual assembly of the models isn't horrible, but putting on those water decals is a true test of patience. I couldn't do them all - when the decals start getting smaller than the tip of a grain of sand, I tend to get a bit annoyed when I have to apply 20 of them.

I also didn't have plans to paint or seal this, so there's a very likely chance that every time I touch the weapons they're gonna lose a decal or two.

The actual figure itself is pretty typical for Snail Shell. You have very standard swivel/ball joints where you'd expect them on this type of body, which unfortunately means no waist articulation, which is great for the lines of her waist, but the ass cap ruins things in that area of the body. There's double jointed knees and elbows, along with pull down hips and shoulders, so you can do some decent stuff there. No articulation at the base of the neck though.

Like other Snail Shell figures, Milk Tea Girl also has adjustable eyeballs for further posing variations.

The body itself certainly looks great. I mean, she's a pin up model, so if she didn't look good it would mean the modelers failed at their job, though I wish they had opted for curvier hips. The Camel Toe also makes me cringe a bit - it's not the prude in me, but it just seems so pointless and is there for shock value.

Use of sun tanned skin is appropriate given the character. Paint work overall is acceptable. Snail Shel l isn't exactly known for their quality control - they're very much a new comer making their name known for value proposition.

I don't even remember how long ago now, but Snail Shell solicited a new product, Milk Tea Girl. I'd basically stopped buying anything from Snail Shell since the two pack, not so much because they're bad, but rather there really isn't much variation in the engineering, and the prices, while were fair, still were kind of higher than I'd want to spend.

Milk Tea Girl was around the usual price point, which is generally over $100 USD on Japanese sites, which really wasn't a problem in that they weren't exactly any cheaper even on Chinese based pages. So the price, coupled with the very bare bones content meant very easy pass.

Well, something must have happened, because in January 2023, I got bored and just poked around to find that all the non Japanese sites seemed to have a more reasonable price for the set, around $70 USD shipped, which puts it around Figuarts level. So I did what any normal person would do, and bit.

I'm certainly glad I didn't pay Japanese MSRP, or BBTS pricing for that matter because Milk Tea Girl is really bare bones. Most of the effort is on you - you get the fully finished figure of the lady herself, with two extra pairs of hands, an extra face, and a pair of feet that you swap out so you can use the included stand. Otherwise, the only other items that come with the set are a lithograph and various plastic model kit parts that are used to build her weaponry, both appearing to be paint guns of some sort using Boba Tea as its primary ammunition source.

The actual assembly of the models isn't horrible, but putting on those water decals is a true test of patience. I couldn't do them all - when the decals start getting smaller than the tip of a grain of sand, I tend to get a bit annoyed when I have to apply 20 of them.

I also didn't have plans to paint or seal this, so there's a very likely chance that every time I touch the weapons they're gonna lose a decal or two.

The actual figure itself is pretty typical for Snail Shell. You have very standard swivel/ball joints where you'd expect them on this type of body, which unfortunately means no waist articulation, which is great for the lines of her waist, but the ass cap ruins things in that area of the body. There's double jointed knees and elbows, along with pull down hips and shoulders, so you can do some decent stuff there. No articulation at the base of the neck though.

Like other Snail Shell figures, Milk Tea Girl also has adjustable eyeballs for further posing variations.

The body itself certainly looks great. I mean, she's a pin up model, so if she didn't look good it would mean the modelers failed at their job, though I wish they had opted for curvier hips. The Camel Toe also makes me cringe a bit - it's not the prude in me, but it just seems so pointless and is there for shock value.

Use of sun tanned skin is appropriate given the character. Paint work overall is acceptable. Snail Shel l isn't exactly known for their quality control - they're very much a new comer making their name known for value proposition.

I don't even remember how long ago now, but Snail Shell solicited a new product, Milk Tea Girl. I'd basically stopped buying anything from Snail Shell since the two pack, not so much because they're bad, but rather there really isn't much variation in the engineering, and the prices, while were fair, still were kind of higher than I'd want to spend.

Milk Tea Girl was around the usual price point, which is generally over $100 USD on Japanese sites, which really wasn't a problem in that they weren't exactly any cheaper even on Chinese based pages. So the price, coupled with the very bare bones content meant very easy pass.

Well, something must have happened, because in January 2023, I got bored and just poked around to find that all the non Japanese sites seemed to have a more reasonable price for the set, around $70 USD shipped, which puts it around Figuarts level. So I did what any normal person would do, and bit.

I'm certainly glad I didn't pay Japanese MSRP, or BBTS pricing for that matter because Milk Tea Girl is really bare bones. Most of the effort is on you - you get the fully finished figure of the lady herself, with two extra pairs of hands, an extra face, and a pair of feet that you swap out so you can use the included stand. Otherwise, the only other items that come with the set are a lithograph and various plastic model kit parts that are used to build her weaponry, both appearing to be paint guns of some sort using Boba Tea as its primary ammunition source.

The actual assembly of the models isn't horrible, but putting on those water decals is a true test of patience. I couldn't do them all - when the decals start getting smaller than the tip of a grain of sand, I tend to get a bit annoyed when I have to apply 20 of them.

I also didn't have plans to paint or seal this, so there's a very likely chance that every time I touch the weapons they're gonna lose a decal or two.

The actual figure itself is pretty typical for Snail Shell. You have very standard swivel/ball joints where you'd expect them on this type of body, which unfortunately means no waist articulation, which is great for the lines of her waist, but the ass cap ruins things in that area of the body. There's double jointed knees and elbows, along with pull down hips and shoulders, so you can do some decent stuff there. No articulation at the base of the neck though.

Like other Snail Shell figures, Milk Tea Girl also has adjustable eyeballs for further posing variations.

The body itself certainly looks great. I mean, she's a pin up model, so if she didn't look good it would mean the modelers failed at their job, though I wish they had opted for curvier hips. The Camel Toe also makes me cringe a bit - it's not the prude in me, but it just seems so pointless and is there for shock value.

Use of sun tanned skin is appropriate given the character. Paint work overall is acceptable. Snail Shel l isn't exactly known for their quality control - they're very much a new comer making their name known for value proposition.

Found accidentially on a walk, nothing changed. / Zufällig beim Spaziergang entdeckt, nix dran geändert!

A redux of one of my very early pictures... (April 2005)

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

It will not change now

After so many years;

Life has not broken it

With parting or tears;

Death will not alter it,

It will live on

In all my songs for you

When I am gone.

~ Sara Teasdale ~

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

I don't even remember how long ago now, but Snail Shell solicited a new product, Milk Tea Girl. I'd basically stopped buying anything from Snail Shell since the two pack, not so much because they're bad, but rather there really isn't much variation in the engineering, and the prices, while were fair, still were kind of higher than I'd want to spend.

Milk Tea Girl was around the usual price point, which is generally over $100 USD on Japanese sites, which really wasn't a problem in that they weren't exactly any cheaper even on Chinese based pages. So the price, coupled with the very bare bones content meant very easy pass.

Well, something must have happened, because in January 2023, I got bored and just poked around to find that all the non Japanese sites seemed to have a more reasonable price for the set, around $70 USD shipped, which puts it around Figuarts level. So I did what any normal person would do, and bit.

I'm certainly glad I didn't pay Japanese MSRP, or BBTS pricing for that matter because Milk Tea Girl is really bare bones. Most of the effort is on you - you get the fully finished figure of the lady herself, with two extra pairs of hands, an extra face, and a pair of feet that you swap out so you can use the included stand. Otherwise, the only other items that come with the set are a lithograph and various plastic model kit parts that are used to build her weaponry, both appearing to be paint guns of some sort using Boba Tea as its primary ammunition source.

The actual assembly of the models isn't horrible, but putting on those water decals is a true test of patience. I couldn't do them all - when the decals start getting smaller than the tip of a grain of sand, I tend to get a bit annoyed when I have to apply 20 of them.

I also didn't have plans to paint or seal this, so there's a very likely chance that every time I touch the weapons they're gonna lose a decal or two.

The actual figure itself is pretty typical for Snail Shell. You have very standard swivel/ball joints where you'd expect them on this type of body, which unfortunately means no waist articulation, which is great for the lines of her waist, but the ass cap ruins things in that area of the body. There's double jointed knees and elbows, along with pull down hips and shoulders, so you can do some decent stuff there. No articulation at the base of the neck though.

Like other Snail Shell figures, Milk Tea Girl also has adjustable eyeballs for further posing variations.

The body itself certainly looks great. I mean, she's a pin up model, so if she didn't look good it would mean the modelers failed at their job, though I wish they had opted for curvier hips. The Camel Toe also makes me cringe a bit - it's not the prude in me, but it just seems so pointless and is there for shock value.

Use of sun tanned skin is appropriate given the character. Paint work overall is acceptable. Snail Shel l isn't exactly known for their quality control - they're very much a new comer making their name known for value proposition.

I don't even remember how long ago now, but Snail Shell solicited a new product, Milk Tea Girl. I'd basically stopped buying anything from Snail Shell since the two pack, not so much because they're bad, but rather there really isn't much variation in the engineering, and the prices, while were fair, still were kind of higher than I'd want to spend.

Milk Tea Girl was around the usual price point, which is generally over $100 USD on Japanese sites, which really wasn't a problem in that they weren't exactly any cheaper even on Chinese based pages. So the price, coupled with the very bare bones content meant very easy pass.

Well, something must have happened, because in January 2023, I got bored and just poked around to find that all the non Japanese sites seemed to have a more reasonable price for the set, around $70 USD shipped, which puts it around Figuarts level. So I did what any normal person would do, and bit.

I'm certainly glad I didn't pay Japanese MSRP, or BBTS pricing for that matter because Milk Tea Girl is really bare bones. Most of the effort is on you - you get the fully finished figure of the lady herself, with two extra pairs of hands, an extra face, and a pair of feet that you swap out so you can use the included stand. Otherwise, the only other items that come with the set are a lithograph and various plastic model kit parts that are used to build her weaponry, both appearing to be paint guns of some sort using Boba Tea as its primary ammunition source.

The actual assembly of the models isn't horrible, but putting on those water decals is a true test of patience. I couldn't do them all - when the decals start getting smaller than the tip of a grain of sand, I tend to get a bit annoyed when I have to apply 20 of them.

I also didn't have plans to paint or seal this, so there's a very likely chance that every time I touch the weapons they're gonna lose a decal or two.

The actual figure itself is pretty typical for Snail Shell. You have very standard swivel/ball joints where you'd expect them on this type of body, which unfortunately means no waist articulation, which is great for the lines of her waist, but the ass cap ruins things in that area of the body. There's double jointed knees and elbows, along with pull down hips and shoulders, so you can do some decent stuff there. No articulation at the base of the neck though.

Like other Snail Shell figures, Milk Tea Girl also has adjustable eyeballs for further posing variations.

The body itself certainly looks great. I mean, she's a pin up model, so if she didn't look good it would mean the modelers failed at their job, though I wish they had opted for curvier hips. The Camel Toe also makes me cringe a bit - it's not the prude in me, but it just seems so pointless and is there for shock value.

Use of sun tanned skin is appropriate given the character. Paint work overall is acceptable. Snail Shel l isn't exactly known for their quality control - they're very much a new comer making their name known for value proposition.

I don't even remember how long ago now, but Snail Shell solicited a new product, Milk Tea Girl. I'd basically stopped buying anything from Snail Shell since the two pack, not so much because they're bad, but rather there really isn't much variation in the engineering, and the prices, while were fair, still were kind of higher than I'd want to spend.

Milk Tea Girl was around the usual price point, which is generally over $100 USD on Japanese sites, which really wasn't a problem in that they weren't exactly any cheaper even on Chinese based pages. So the price, coupled with the very bare bones content meant very easy pass.

Well, something must have happened, because in January 2023, I got bored and just poked around to find that all the non Japanese sites seemed to have a more reasonable price for the set, around $70 USD shipped, which puts it around Figuarts level. So I did what any normal person would do, and bit.

I'm certainly glad I didn't pay Japanese MSRP, or BBTS pricing for that matter because Milk Tea Girl is really bare bones. Most of the effort is on you - you get the fully finished figure of the lady herself, with two extra pairs of hands, an extra face, and a pair of feet that you swap out so you can use the included stand. Otherwise, the only other items that come with the set are a lithograph and various plastic model kit parts that are used to build her weaponry, both appearing to be paint guns of some sort using Boba Tea as its primary ammunition source.

The actual assembly of the models isn't horrible, but putting on those water decals is a true test of patience. I couldn't do them all - when the decals start getting smaller than the tip of a grain of sand, I tend to get a bit annoyed when I have to apply 20 of them.

I also didn't have plans to paint or seal this, so there's a very likely chance that every time I touch the weapons they're gonna lose a decal or two.

The actual figure itself is pretty typical for Snail Shell. You have very standard swivel/ball joints where you'd expect them on this type of body, which unfortunately means no waist articulation, which is great for the lines of her waist, but the ass cap ruins things in that area of the body. There's double jointed knees and elbows, along with pull down hips and shoulders, so you can do some decent stuff there. No articulation at the base of the neck though.

Like other Snail Shell figures, Milk Tea Girl also has adjustable eyeballs for further posing variations.

The body itself certainly looks great. I mean, she's a pin up model, so if she didn't look good it would mean the modelers failed at their job, though I wish they had opted for curvier hips. The Camel Toe also makes me cringe a bit - it's not the prude in me, but it just seems so pointless and is there for shock value.

Use of sun tanned skin is appropriate given the character. Paint work overall is acceptable. Snail Shel l isn't exactly known for their quality control - they're very much a new comer making their name known for value proposition.

Milk Tea Girl

by Snail Shell

I don't even remember how long ago now, but Snail Shell solicited a new product, Milk Tea Girl. I'd basically stopped buying anything from Snail Shell since the two pack, not so much because they're bad, but rather there really isn't much variation in the engineering, and the prices, while were fair, still were kind of higher than I'd want to spend.

Milk Tea Girl was around the usual price point, which is generally over $100 USD on Japanese sites, which really wasn't a problem in that they weren't exactly any cheaper even on Chinese based pages. So the price, coupled with the very bare bones content meant very easy pass.

Well, something must have happened, because in January 2023, I got bored and just poked around to find that all the non Japanese sites seemed to have a more reasonable price for the set, around $70 USD shipped, which puts it around Figuarts level. So I did what any normal person would do, and bit.

I'm certainly glad I didn't pay Japanese MSRP, or BBTS pricing for that matter because Milk Tea Girl is really bare bones. Most of the effort is on you - you get the fully finished figure of the lady herself, with two extra pairs of hands, an extra face, and a pair of feet that you swap out so you can use the included stand. Otherwise, the only other items that come with the set are a lithograph and various plastic model kit parts that are used to build her weaponry, both appearing to be paint guns of some sort using Boba Tea as its primary ammunition source.

The actual assembly of the models isn't horrible, but putting on those water decals is a true test of patience. I couldn't do them all - when the decals start getting smaller than the tip of a grain of sand, I tend to get a bit annoyed when I have to apply 20 of them.

I also didn't have plans to paint or seal this, so there's a very likely chance that every time I touch the weapons they're gonna lose a decal or two.

The actual figure itself is pretty typical for Snail Shell. You have very standard swivel/ball joints where you'd expect them on this type of body, which unfortunately means no waist articulation, which is great for the lines of her waist, but the ass cap ruins things in that area of the body. There's double jointed knees and elbows, along with pull down hips and shoulders, so you can do some decent stuff there. No articulation at the base of the neck though.

Like other Snail Shell figures, Milk Tea Girl also has adjustable eyeballs for further posing variations.

The body itself certainly looks great. I mean, she's a pin up model, so if she didn't look good it would mean the modelers failed at their job, though I wish they had opted for curvier hips. The Camel Toe also makes me cringe a bit - it's not the prude in me, but it just seems so pointless and is there for shock value.

Use of sun tanned skin is appropriate given the character. Paint work overall is acceptable. Snail Shel l isn't exactly known for their quality control - they're very much a new comer making their name known for value proposition.

I don't even remember how long ago now, but Snail Shell solicited a new product, Milk Tea Girl. I'd basically stopped buying anything from Snail Shell since the two pack, not so much because they're bad, but rather there really isn't much variation in the engineering, and the prices, while were fair, still were kind of higher than I'd want to spend.

Milk Tea Girl was around the usual price point, which is generally over $100 USD on Japanese sites, which really wasn't a problem in that they weren't exactly any cheaper even on Chinese based pages. So the price, coupled with the very bare bones content meant very easy pass.

Well, something must have happened, because in January 2023, I got bored and just poked around to find that all the non Japanese sites seemed to have a more reasonable price for the set, around $70 USD shipped, which puts it around Figuarts level. So I did what any normal person would do, and bit.

I'm certainly glad I didn't pay Japanese MSRP, or BBTS pricing for that matter because Milk Tea Girl is really bare bones. Most of the effort is on you - you get the fully finished figure of the lady herself, with two extra pairs of hands, an extra face, and a pair of feet that you swap out so you can use the included stand. Otherwise, the only other items that come with the set are a lithograph and various plastic model kit parts that are used to build her weaponry, both appearing to be paint guns of some sort using Boba Tea as its primary ammunition source.

The actual assembly of the models isn't horrible, but putting on those water decals is a true test of patience. I couldn't do them all - when the decals start getting smaller than the tip of a grain of sand, I tend to get a bit annoyed when I have to apply 20 of them.

I also didn't have plans to paint or seal this, so there's a very likely chance that every time I touch the weapons they're gonna lose a decal or two.

The actual figure itself is pretty typical for Snail Shell. You have very standard swivel/ball joints where you'd expect them on this type of body, which unfortunately means no waist articulation, which is great for the lines of her waist, but the ass cap ruins things in that area of the body. There's double jointed knees and elbows, along with pull down hips and shoulders, so you can do some decent stuff there. No articulation at the base of the neck though.

Like other Snail Shell figures, Milk Tea Girl also has adjustable eyeballs for further posing variations.

The body itself certainly looks great. I mean, she's a pin up model, so if she didn't look good it would mean the modelers failed at their job, though I wish they had opted for curvier hips. The Camel Toe also makes me cringe a bit - it's not the prude in me, but it just seems so pointless and is there for shock value.

Use of sun tanned skin is appropriate given the character. Paint work overall is acceptable. Snail Shel l isn't exactly known for their quality control - they're very much a new comer making their name known for value proposition.

I don't even remember how long ago now, but Snail Shell solicited a new product, Milk Tea Girl. I'd basically stopped buying anything from Snail Shell since the two pack, not so much because they're bad, but rather there really isn't much variation in the engineering, and the prices, while were fair, still were kind of higher than I'd want to spend.

Milk Tea Girl was around the usual price point, which is generally over $100 USD on Japanese sites, which really wasn't a problem in that they weren't exactly any cheaper even on Chinese based pages. So the price, coupled with the very bare bones content meant very easy pass.

Well, something must have happened, because in January 2023, I got bored and just poked around to find that all the non Japanese sites seemed to have a more reasonable price for the set, around $70 USD shipped, which puts it around Figuarts level. So I did what any normal person would do, and bit.

I'm certainly glad I didn't pay Japanese MSRP, or BBTS pricing for that matter because Milk Tea Girl is really bare bones. Most of the effort is on you - you get the fully finished figure of the lady herself, with two extra pairs of hands, an extra face, and a pair of feet that you swap out so you can use the included stand. Otherwise, the only other items that come with the set are a lithograph and various plastic model kit parts that are used to build her weaponry, both appearing to be paint guns of some sort using Boba Tea as its primary ammunition source.

The actual assembly of the models isn't horrible, but putting on those water decals is a true test of patience. I couldn't do them all - when the decals start getting smaller than the tip of a grain of sand, I tend to get a bit annoyed when I have to apply 20 of them.

I also didn't have plans to paint or seal this, so there's a very likely chance that every time I touch the weapons they're gonna lose a decal or two.

The actual figure itself is pretty typical for Snail Shell. You have very standard swivel/ball joints where you'd expect them on this type of body, which unfortunately means no waist articulation, which is great for the lines of her waist, but the ass cap ruins things in that area of the body. There's double jointed knees and elbows, along with pull down hips and shoulders, so you can do some decent stuff there. No articulation at the base of the neck though.

Like other Snail Shell figures, Milk Tea Girl also has adjustable eyeballs for further posing variations.

The body itself certainly looks great. I mean, she's a pin up model, so if she didn't look good it would mean the modelers failed at their job, though I wish they had opted for curvier hips. The Camel Toe also makes me cringe a bit - it's not the prude in me, but it just seems so pointless and is there for shock value.

Use of sun tanned skin is appropriate given the character. Paint work overall is acceptable. Snail Shel l isn't exactly known for their quality control - they're very much a new comer making their name known for value proposition.

I don't even remember how long ago now, but Snail Shell solicited a new product, Milk Tea Girl. I'd basically stopped buying anything from Snail Shell since the two pack, not so much because they're bad, but rather there really isn't much variation in the engineering, and the prices, while were fair, still were kind of higher than I'd want to spend.

Milk Tea Girl was around the usual price point, which is generally over $100 USD on Japanese sites, which really wasn't a problem in that they weren't exactly any cheaper even on Chinese based pages. So the price, coupled with the very bare bones content meant very easy pass.

Well, something must have happened, because in January 2023, I got bored and just poked around to find that all the non Japanese sites seemed to have a more reasonable price for the set, around $70 USD shipped, which puts it around Figuarts level. So I did what any normal person would do, and bit.

I'm certainly glad I didn't pay Japanese MSRP, or BBTS pricing for that matter because Milk Tea Girl is really bare bones. Most of the effort is on you - you get the fully finished figure of the lady herself, with two extra pairs of hands, an extra face, and a pair of feet that you swap out so you can use the included stand. Otherwise, the only other items that come with the set are a lithograph and various plastic model kit parts that are used to build her weaponry, both appearing to be paint guns of some sort using Boba Tea as its primary ammunition source.

The actual assembly of the models isn't horrible, but putting on those water decals is a true test of patience. I couldn't do them all - when the decals start getting smaller than the tip of a grain of sand, I tend to get a bit annoyed when I have to apply 20 of them.

I also didn't have plans to paint or seal this, so there's a very likely chance that every time I touch the weapons they're gonna lose a decal or two.

The actual figure itself is pretty typical for Snail Shell. You have very standard swivel/ball joints where you'd expect them on this type of body, which unfortunately means no waist articulation, which is great for the lines of her waist, but the ass cap ruins things in that area of the body. There's double jointed knees and elbows, along with pull down hips and shoulders, so you can do some decent stuff there. No articulation at the base of the neck though.

Like other Snail Shell figures, Milk Tea Girl also has adjustable eyeballs for further posing variations.

The body itself certainly looks great. I mean, she's a pin up model, so if she didn't look good it would mean the modelers failed at their job, though I wish they had opted for curvier hips. The Camel Toe also makes me cringe a bit - it's not the prude in me, but it just seems so pointless and is there for shock value.

Use of sun tanned skin is appropriate given the character. Paint work overall is acceptable. Snail Shel l isn't exactly known for their quality control - they're very much a new comer making their name known for value proposition.

I don't even remember how long ago now, but Snail Shell solicited a new product, Milk Tea Girl. I'd basically stopped buying anything from Snail Shell since the two pack, not so much because they're bad, but rather there really isn't much variation in the engineering, and the prices, while were fair, still were kind of higher than I'd want to spend.

Milk Tea Girl was around the usual price point, which is generally over $100 USD on Japanese sites, which really wasn't a problem in that they weren't exactly any cheaper even on Chinese based pages. So the price, coupled with the very bare bones content meant very easy pass.

Well, something must have happened, because in January 2023, I got bored and just poked around to find that all the non Japanese sites seemed to have a more reasonable price for the set, around $70 USD shipped, which puts it around Figuarts level. So I did what any normal person would do, and bit.

I'm certainly glad I didn't pay Japanese MSRP, or BBTS pricing for that matter because Milk Tea Girl is really bare bones. Most of the effort is on you - you get the fully finished figure of the lady herself, with two extra pairs of hands, an extra face, and a pair of feet that you swap out so you can use the included stand. Otherwise, the only other items that come with the set are a lithograph and various plastic model kit parts that are used to build her weaponry, both appearing to be paint guns of some sort using Boba Tea as its primary ammunition source.

The actual assembly of the models isn't horrible, but putting on those water decals is a true test of patience. I couldn't do them all - when the decals start getting smaller than the tip of a grain of sand, I tend to get a bit annoyed when I have to apply 20 of them.

I also didn't have plans to paint or seal this, so there's a very likely chance that every time I touch the weapons they're gonna lose a decal or two.

The actual figure itself is pretty typical for Snail Shell. You have very standard swivel/ball joints where you'd expect them on this type of body, which unfortunately means no waist articulation, which is great for the lines of her waist, but the ass cap ruins things in that area of the body. There's double jointed knees and elbows, along with pull down hips and shoulders, so you can do some decent stuff there. No articulation at the base of the neck though.

Like other Snail Shell figures, Milk Tea Girl also has adjustable eyeballs for further posing variations.

The body itself certainly looks great. I mean, she's a pin up model, so if she didn't look good it would mean the modelers failed at their job, though I wish they had opted for curvier hips. The Camel Toe also makes me cringe a bit - it's not the prude in me, but it just seems so pointless and is there for shock value.

Use of sun tanned skin is appropriate given the character. Paint work overall is acceptable. Snail Shel l isn't exactly known for their quality control - they're very much a new comer making their name known for value proposition.

Snail shell found in my garden -- no longer inhabited and a bit battered by the thrush that ate it.

For the TNC weekly challenge on Lines.

This beautiful blue bee nests in snail shells. I am not sure if there are other species in the East that nest in snail shells, there could be...we know so very little about most species. Collected in Maryland somewhere (probably western Maryland) and Photographed by Wayne Boo.

~~~~~~~~~~{{{{{{0}}}}}}~~~~~~~~~~

All photographs are public domain, feel free to download and use as you wish.

Photography Information: Canon Mark II 5D, Zerene Stacker, Stackshot Sled, 65mm Canon MP-E 1-5X macro lens, Twin Macro Flash in Styrofoam Cooler, F5.0, ISO 100, Shutter Speed 200

Beauty is truth, truth beauty - that is all

Ye know on earth and all ye need to know

" Ode on a Grecian Urn"

John Keats

You can also follow us on Instagram account USGSBIML Want some Useful Links to the Techniques We Use? Well now here you go Citizen:

Art Photo Book: Bees: An Up-Close Look at Pollinators Around the World

www.qbookshop.com/products/216627/9780760347386/Bees.html...

Basic USGSBIML set up:

www.youtube.com/watch?v=S-_yvIsucOY

USGSBIML Photoshopping Technique: Note that we now have added using the burn tool at 50% opacity set to shadows to clean up the halos that bleed into the black background from "hot" color sections of the picture.

www.youtube.com/watch?v=Bdmx_8zqvN4

PDF of Basic USGSBIML Photography Set Up:

ftp://ftpext.usgs.gov/pub/er/md/laurel/Droege/How%20to%20Take%20MacroPhotographs%20of%20Insects%20BIML%20Lab2.pdf

Google Hangout Demonstration of Techniques:

plus.google.com/events/c5569losvskrv2nu606ltof8odo

or

www.youtube.com/watch?v=4c15neFttoU

Excellent Technical Form on Stacking:

www.photomacrography.net/

Contact information:

Sam Droege

sdroege@usgs.gov

301 497 5840

Blog: akhromant.neocities.org

My first snail shot, it needs work LOL, but I finally did it. I've been dying to do this since I got my macro lens.

There were quite a few of these small, old snail shells lying on the edge of a pond near Mt. Yamnuska yesterday. A few of us went west of the city to the very eastern edge of the Rocky Mountains for a day of botanizing the area at the foot of Mt. Yamnuska. What a beautiful area it is, including a bog. I knew I wouldn't want to do a lot of walking wearing rubber boots, and I didn't want to carry these heavy things. So, I arrived home with soaking wet sneakers and feet. Wonderful to see Bogbean and the carnivorous Sundew again. Weather wasn't too hot - just nice for hiking. Just uploaded a rather crummy shot of two gorgeous moths that we saw there - St. Lawrence Tiger Moths.

en.wikipedia.org/wiki/Ramshorn_snail

Steve found it while he and Evan were planting some peas a couple days before. I saved it and put it on some of our wood sorrel for a picture. It was probably about a centimeter in diameter, so I got out the macro lens.

The seeds I had picked last month (or was it the month before ?) is still there, and in a pretty good shape. (May 19th 2009)

Yes, they go round and round!

Finally made some of my snailshell beads into earrings

The Snail Shell Assassin figure recently released, and I got mine in a few days ago. Like Figma, Snail Shell has a very competent body that they tweak and provide for use in developing figures for the assortment of interesting character designs.

So I don't know the official names or anything, but this figure basically has two forms - some strange hybrid cybernetic animal form, and of course, the expected Waifu in skintight jumpsuit form.

It's an interesting design aesthetic, though for an assassin she seems awfully under armed, featuring a knife and a Grapnel Gun. The sheath for the knife and the harness for the Grapnel Gun plug directly into her lower spine. The interesting thing is that the hands are only meant to hold the knife - the Grapnel Gun is directly deployed from her harness... or that's what I think, as there's no real instructons.

Grapnel Gun comes with a coiled wire as well as three different tips, one for use when the tip has not been fired, and two actual projectiles to use with the wire.

Assassin is a return to average height for one of their figures, as Milk T Girl was just really short, though to be fair she was also really cheap to buy.

The cyborg mode head features multiple joints for articulation in the neck, covered with a fabric piece to hid the joints. There's also a joint at the base of the head, so overall this giraffe necked sculpt is actually very articulated. Compared to the normal head, which features effectively no neck articulation and limited head tilt, this feels somewhat like a step back.

Articulation has generally not been an issue with Snail Shell figures, and this is no different. mainly lacking a waist and butterfly shoulder joints. I've never removed the legs of any of the other figures (but this one I have to in order to swap out the groin pieces, and I notied the the hip design actually features some robust designs to allow for increased range of let motion without relying on a pull down hip design. The tail is actually articulated, tough the connection looks so fragile I'm afraid to actually manipulate the piece too much.

As always, use of the base will increase your posing options, and the base has cavities for you to store you spare pieces.

The two face plates are functional, and I can only presume they look like the source art. I can say, however, they're solid in terms of looking anime in nature, though again I wonder if this is simply because art direction insisted. There seems to be more rouge around the eyes on the finished product compared to the prototypes, and this shows up on the photos.

Otherwise, Paint and Build wise, pretty much on par with other Snail Shell items. in case you weren't aware, that is basically Storm Collectibles level of quality that should be coming out from these sets. Some questionable design choices as i've outlined above, but overall the figure certainly holds together than product from other companies.

Hedleyella falconeri Giant Panda Snail

The Snail Shell Assassin figure recently released, and I got mine in a few days ago. Like Figma, Snail Shell has a very competent body that they tweak and provide for use in developing figures for the assortment of interesting character designs.

So I don't know the official names or anything, but this figure basically has two forms - some strange hybrid cybernetic animal form, and of course, the expected Waifu in skintight jumpsuit form.

It's an interesting design aesthetic, though for an assassin she seems awfully under armed, featuring a knife and a Grapnel Gun. The sheath for the knife and the harness for the Grapnel Gun plug directly into her lower spine. The interesting thing is that the hands are only meant to hold the knife - the Grapnel Gun is directly deployed from her harness... or that's what I think, as there's no real instructons.

Grapnel Gun comes with a coiled wire as well as three different tips, one for use when the tip has not been fired, and two actual projectiles to use with the wire.

Assassin is a return to average height for one of their figures, as Milk T Girl was just really short, though to be fair she was also really cheap to buy.

The cyborg mode head features multiple joints for articulation in the neck, covered with a fabric piece to hid the joints. There's also a joint at the base of the head, so overall this giraffe necked sculpt is actually very articulated. Compared to the normal head, which features effectively no neck articulation and limited head tilt, this feels somewhat like a step back.

Articulation has generally not been an issue with Snail Shell figures, and this is no different. mainly lacking a waist and butterfly shoulder joints. I've never removed the legs of any of the other figures (but this one I have to in order to swap out the groin pieces, and I notied the the hip design actually features some robust designs to allow for increased range of let motion without relying on a pull down hip design. The tail is actually articulated, tough the connection looks so fragile I'm afraid to actually manipulate the piece too much.

As always, use of the base will increase your posing options, and the base has cavities for you to store you spare pieces.

The two face plates are functional, and I can only presume they look like the source art. I can say, however, they're solid in terms of looking anime in nature, though again I wonder if this is simply because art direction insisted. There seems to be more rouge around the eyes on the finished product compared to the prototypes, and this shows up on the photos.

Otherwise, Paint and Build wise, pretty much on par with other Snail Shell items. in case you weren't aware, that is basically Storm Collectibles level of quality that should be coming out from these sets. Some questionable design choices as i've outlined above, but overall the figure certainly holds together than product from other companies.

The Snail Shell Assassin figure recently released, and I got mine in a few days ago. Like Figma, Snail Shell has a very competent body that they tweak and provide for use in developing figures for the assortment of interesting character designs.

So I don't know the official names or anything, but this figure basically has two forms - some strange hybrid cybernetic animal form, and of course, the expected Waifu in skintight jumpsuit form.

It's an interesting design aesthetic, though for an assassin she seems awfully under armed, featuring a knife and a Grapnel Gun. The sheath for the knife and the harness for the Grapnel Gun plug directly into her lower spine. The interesting thing is that the hands are only meant to hold the knife - the Grapnel Gun is directly deployed from her harness... or that's what I think, as there's no real instructons.

Grapnel Gun comes with a coiled wire as well as three different tips, one for use when the tip has not been fired, and two actual projectiles to use with the wire.

Assassin is a return to average height for one of their figures, as Milk T Girl was just really short, though to be fair she was also really cheap to buy.

The cyborg mode head features multiple joints for articulation in the neck, covered with a fabric piece to hid the joints. There's also a joint at the base of the head, so overall this giraffe necked sculpt is actually very articulated. Compared to the normal head, which features effectively no neck articulation and limited head tilt, this feels somewhat like a step back.

Articulation has generally not been an issue with Snail Shell figures, and this is no different. mainly lacking a waist and butterfly shoulder joints. I've never removed the legs of any of the other figures (but this one I have to in order to swap out the groin pieces, and I notied the the hip design actually features some robust designs to allow for increased range of let motion without relying on a pull down hip design. The tail is actually articulated, tough the connection looks so fragile I'm afraid to actually manipulate the piece too much.

As always, use of the base will increase your posing options, and the base has cavities for you to store you spare pieces.

The two face plates are functional, and I can only presume they look like the source art. I can say, however, they're solid in terms of looking anime in nature, though again I wonder if this is simply because art direction insisted. There seems to be more rouge around the eyes on the finished product compared to the prototypes, and this shows up on the photos.

Otherwise, Paint and Build wise, pretty much on par with other Snail Shell items. in case you weren't aware, that is basically Storm Collectibles level of quality that should be coming out from these sets. Some questionable design choices as i've outlined above, but overall the figure certainly holds together than product from other companies.

This little snail shell sizes ca. 1 cm.

The natural texture on this snail shell is looking cryptographic, isn't it?

...

www.youtube.com/watch?v=B3DcWtkKeIY

A simple low bed on a platform, drapped in exotic fabrics, a painted tree and scattered blossom on the walls, a snailshell on the ceiling.

I found these snail shells outside my office building last week and brought them home, I was a happy girl...

Rows of shells. Turbans and tops. I thought they looked quite elegant on their black background. Each is so wonderfully precious and jewel-like. Each seems to have a story embeded within.

This poem uses the shell methaphor brilliantly:

The Sea Shell

by Marin Sorescu

I have hidden inside a sea shell

but forgotten in which.

Now daily I dive,

filtering the sea through my fingers,

to find myself.

Sometimes I think

a giant fish has swallowed me.

Looking for it everywhere I want to make sure

it will get me completely.

The sea-bed attracts me, and

I’m repelled by millions

of sea shells that all look alike.

Help, I am one of them.

If only I knew, which.

How often I’ve gone straight up

to one of them, saying: That’s me.

Only, when I prised it open

it was empty.

Shot w/ a Wanderlust Cameras Pinwide on an olympus EP-1. The Pinwide is a ultra wide pinhole cap designed to fit on any micro 4/3 camera (except Panasonic AG-AF100 or AG-AF101 videocamera). To turn your micro 4/3 camera into a pinhole camera visit us at www.wanderlustcameras.com

twitter.com/#!/wanderlustcam

Old Cape Cod

If you're fond of sand dunes and salty air

Quaint little villages here and there

You're sure to fall in love with old Cape Cod

You're sure to fall in love with old Cape Cod

Der Weinbergschnecke ist es noch zu kalt. - It´s still cold for the edible snail.