View allAll Photos Tagged programmer
A top-down view of an Innsbruck box with the first level mounted. The faceplate is on the right, the power board is on the upper left. The DDS tower is at the top center with its chain boards below it. The DAC tower is in the middle right with its chain boards below it. The VGA tower is in the top right, between the DDS and DAC towers. The pulse sequencer and its breakout board are in the lower left.
Note that Innsbruck boxes are designed to have the chain boards mounted in a separate tower. This is more physically robust than the MPQ setup.
CityCampHNL Hackathon was held on Jan 20, 21, 2012 at the McCoy Pavilion at Ala Moana Beach Park. Six teams did a great job developing apps based on City data.
Hrers my Pic Programming tools... Ive had the PIckit 2 about 6 months now and its really excellent, so i decided to buy the PICkit3 because im going to be using more advanced devices in the future. PICkit 3 is not quite as good as PICkit 2 to be honest. Its supposed to be more powerfull but its slower and you have to change the PICkit 3 firmware when you want to use a different PIC device. The PC software user interface is laggy and lacks the logic analyzer tool and terminal functions that come with PICkit 2. Lets hope Microchip improve picKit 3 in later software updates .
CityCampHNL Hackathon was held on Jan 20, 21, 2012 at the McCoy Pavilion at Ala Moana Beach Park. Six teams did a great job developing apps based on City data.
CityCampHNL Hackathon was held on Jan 20, 21, 2012 at the McCoy Pavilion at Ala Moana Beach Park. Six teams did a great job developing apps based on City data.
This image is copyrighted and may not be used in any shape or form without written consent of Scott Eisen.
Burning a bootloader to an ATmega328p using SparkFun's Tiny AVR Programmer[1][2]. These steps are all documented elsewhere, but not together in one place.
Preparing to burn the bootloader:
- Connect as in the photo[3][4]. A bare ATmega328 is likely to be shipped requiring an external 16MHz crystal. A pullup on the reset pin is required. An LED on pin 13 (which is also SCK) is optional.
- Install the Breadboard Arduino board config[5].
- Board > ATmega328 on Breadboard
- Programmer > USBTinyISP
After burning the bootloader with the 8MHz internal clock, the external crystal may be removed.
Uploading a sketch:
- Sketch > Upload using Programmer
The normal sketch upload button does not work (errors like "avrdude: ser_open(): can't open device").
[1] product www.sparkfun.com/products/11801
[2] instructions/pinout learn.sparkfun.com/tutorials/tiny-avr-programmer-hookup-g...
[3] ATmega328 (and 168) pinout www.arduino.cc/en/Hacking/PinMapping168
[4] connection guide learn.sparkfun.com/tutorials/installing-an-arduino-bootlo...
[5] under "Minimal Circuit" www.arduino.cc/en/Tutorial/ArduinoToBreadboard
Ismael is a veteran Spanish programmer who participated in some of the most important national projects, also with international reach (Commandos Saga, Planet 51: The Game...). Along with Javier Arévalo, he is one of the pillars at Pyro Studios, and an example for new generations of game developers.
LinkedIn: es.linkedin.com/in/phornee
Ismael Raya Roa (Phornee). Programador jefe en Pyro Studios / Zed
Ismael es un programador veterano del panorama español, ha estado en algunos de los proyectos (Saga Commandos, Planet 51, etc) más importantes de nuestra industria a nivel internacional. Junto con Javier Arévalo, es uno de los estandartes de Pyro Studios y un modelo a seguir para las nuevas generaciones de desarrolladores.
LinkedIn: es.linkedin.com/in/phornee
Programmers: Nature's way of converting caffeine into algorithms.
Only got one shot in for the first week of May's photo challenge on the topic of beverages. I'm going to really try to get my average up the rest of the month.
I'm also a bit behind for the 52 group, so this shot will do double duty.
The IBM System 7 Computer installed in Fairymead Mill for Factory Process Control. Alan Mooney, Bundaberg Sugar Programmer for the System 7.
CityCampHNL Hackathon was held on Jan 20, 21, 2012 at the McCoy Pavilion at Ala Moana Beach Park. Six teams did a great job developing apps based on City data.
Programmers at the January 2014 Code for DC Civic Hacknight. OpenGov Hub, 1889 F St NW, Washington, DC.
CityCampHNL Hackathon was held on Jan 20, 21, 2012 at the McCoy Pavilion at Ala Moana Beach Park. Six teams did a great job developing apps based on City data.
A 32pin DIP 128KB/256KB Flash ROM programmer made out of an old SMC PCI network card. Software used: ctflasher for Linux.
a portret of a programmer who worked for me, some years ago. Who decided to crack and hack data on my servers, and made live extremely difficult for me and my clients. On top of that he's pubilishing a cv on his site, in which he claims sites, he programmed: I mean, for sure there was someone else working for me, programming these sites. What I really don't understand is, that this creature, 36, is still trying to give me a hard time: it tells me a lot about his sneaky caracter.
chipKIT PGM Programmer/Debugger for use with Digilent chipKIT Platforms
The chipKIT PGM is designed to work with the MPLAB® and MPLAB X development environments available from Microchip. This allows the chipKIT boards, for example, to be used as a more traditional microcontroller development platform using the professional tools available from Microchip. While the PICkit™3 programmer can generate programming voltages needed to program all Microchip PIC devices, the chipKIT PGM can only program devices that are programmable with 3.3V programming voltage. Further, the PICkit3 can source a small amount of current to provide power to some boards being programmed. The chipKIT PGM does not provide power to the board being programmed.
store.digilentinc.com/chipkit-pgm-programmer-debugger-for...
PICkit 3 In-circuit Debugger
The MPLAB PICkit 3 allows debugging and programming of PIC and dsPIC Flash microcontrollers at a most affordable price point using the powerful graphical user interface of the MPLAB Integrated Development Environment (IDE). The MPLAB PICkit 3 is connected to the design engineer's PC using a full speed USB interface and can be connected to the target via an Microchip debug (RJ-11) connector (compatible with MPLAB ICD 2, MPLAB ICD 3 and MPLAB REAL ICE). The connector uses two device I/O pins and the reset line to implement in-circuit debugging and In-Circuit Serial Programming.
This is my 4x20 LCD Display at work, together with a Freeduino BBB, and a BUB Programmer, purchased at "The Shoppe", by mail.
Voronezh is a city and the administrative centre of Voronezh Oblast in southwestern Russia straddling the Voronezh River, located 12 kilometers (7.5 mi) from where it flows into the Don River. The city sits on the Southeastern Railway, which connects western Russia with the Urals and Siberia, the Caucasus and Ukraine, and the M4 highway (Moscow–Voronezh–Rostov-on-Don–Novorossiysk). In recent years the city has experienced rapid population growth, rising in 2021 to 1,057,681, up from 889,680 recorded in the 2010 Census, making it the 14th-most populous city in the country.
For many years, the hypothesis of the Soviet historian Vladimir Zagorovsky dominated: he produced the toponym "Voronezh" from the hypothetical Slavic personal name Voroneg. This man allegedly gave the name of a small town in the Chernigov Principality (now the village of Voronizh in Ukraine). Later, in the 11th or 12th century, the settlers were able to "transfer" this name to the Don region, where they named the second city Voronezh, and the river got its name from the city. However, now many researchers criticize the hypothesis, since in reality neither the name of Voroneg nor the second city was revealed, and usually the names of Russian cities repeated the names of the rivers, but not vice versa.
A comprehensive scientific analysis was conducted in 2015–2016 by the historian Pavel Popov. His conclusion: "Voronezh" is a probable Slavic macrotoponym associated with outstanding signs of nature, has a root voron- (from the proto-Slavic vorn) in the meaning of "black, dark" and the suffix -ezh (-azh, -ozh). It was not “transferred” and in the 8th - 9th centuries it marked a vast territory covered with black forests (oak forests) - from the mouth of the Voronezh river to the Voronozhsky annalistic forests in the middle and upper reaches of the river, and in the west to the Don (many forests were cut down). The historian believes that the main "city" of the early town-planning complex could repeat the name of the region – Voronezh. Now the hillfort is located in the administrative part of the modern city, in the Voronezh upland oak forest. This is one of Europe's largest ancient Slavic hillforts, the area of which – more than 9 hectares – 13 times the area of the main settlement in Kyiv before the baptism of Rus.
In it is assumed that the word "Voronezh" means bluing - a technique to increase the corrosion resistance of iron products. This explanation fits well with the proximity to the ancient city of Voronezh of a large iron deposit and the city of Stary Oskol. As well as the name of Voroneț Monastery known for its blue shade.
Folk etymology claims the name comes from combining the Russian words for raven (ворон) and hedgehog (еж) into Воронеж. According to this explanation two Slavic tribes named after the animals used this combination to name the river which later in turn provided the name for a settlement. There is not believed to be any scientific support for this explanation.
In the 16th century, the Middle Don basin, including the Voronezh river, was gradually conquered by Muscovy from the Nogai Horde (a successor state of the Golden Horde), and the current city of Voronezh was established in 1585 by Feodor I as a fort protecting the Muravsky Trail trade route against the slave raids of the Nogai and Crimean Tatars. The city was named after the river.
17th to 19th centuries
In the 17th century, Voronezh gradually evolved into a sizable town. Weronecz is shown on the Worona river in Resania in Joan Blaeu's map of 1645. Peter the Great built a dockyard in Voronezh where the Azov Flotilla was constructed for the Azov campaigns in 1695 and 1696. This fleet, the first ever built in Russia, included the first Russian ship of the line, Goto Predestinatsia. The Orthodox diocese of Voronezh was instituted in 1682 and its first bishop, Mitrofan of Voronezh, was later proclaimed the town's patron saint.
Owing to the Voronezh Admiralty Wharf, for a short time, Voronezh became the largest city of South Russia and the economic center of a large and fertile region. In 1711, it was made the seat of the Azov Governorate, which eventually morphed into the Voronezh Governorate.
In the 19th century, Voronezh was a center of the Central Black Earth Region. Manufacturing industry (mills, tallow-melting, butter-making, soap, leather, and other works) as well as bread, cattle, suet, and the hair trade developed in the town. A railway connected Voronezh with Moscow in 1868 and Rostov-on-Don in 1871.
Katherine McNamara, Deborah Prum, Robert Schultz and Katherine Young talked about ibook technology and interactive books during the 2015 Virginia Festival of the Book on Sunday, March 22, 2015.
Photo by Pat Jarrett/VFH staff