Some background:

The VF-1 was developed by Stonewell/Bellcom/Shinnakasu for the U.N. Spacy by using alien Overtechnology obtained from the SDF-1 Macross alien spaceship. Its production was preceded by an aerodynamic proving version of its airframe, the VF-X. Unlike all later VF vehicles, the VF-X was strictly a jet aircraft, built to demonstrate that a jet fighter with the features necessary to convert to Battroid mode was aerodynamically feasible. After the VF-X's testing was finished, an advanced concept atmospheric-only prototype, the VF-0 Phoenix, was flight-tested from 2005 to 2007 and briefly served as an active-duty fighter from 2007 to the VF-1's rollout in late 2008, while the bugs were being worked out of the full-up VF-1 prototype (VF-X-1).

However, the fighter remained active in many second line units and continued to show its worthiness years later, e. g. through Milia Jenius who would use her old VF-1 fighter in defense of the colonization fleet - 35 years after the type's service introduction!

General characteristics:

All-environment variable fighter and tactical combat Battroid,

used by U.N. Spacy, U.N. Navy, U.N. Space Air Force and U.N.S. Marine Corps

Accommodation:

Pilot only in Marty & Beck Mk-7 zero/zero ejection seat

Dimensions:

Fighter Mode:

Length 14.23 meters

Wingspan 14.78 meters (at 20° minimum sweep)

Height 3.84 meters

Battroid Mode:

Height 12.68 meters

Width 7.3 meters

Length 4.0 meters

Empty weight: 13.25 metric tons;

Standard T-O mass: 18.5 metric tons;

MTOW: 37.0 metric tons

Power Plant:

2x Shinnakasu Heavy Industry/P&W/Roice FF-2001 thermonuclear reaction turbine engines, output 650 MW each, rated at 11,500 kg in standard or 225.63 kN in overboost

4x Shinnakasu Heavy Industry NBS-1 high-thrust vernier thrusters (1 x counter reverse vernier thruster nozzle mounted on the side of each leg nacelle/air intake, 1 x wing thruster roll control system on each wingtip)

18x P&W LHP04 low-thrust vernier thrusters beneath multipurpose hook/handles

Performance:

Battroid Mode: maximum walking speed 160 km/h

Fighter Mode: at 10,000 m Mach 2.71; at 30,000+ m Mach 3.87

g limit: in space +7

Thrust-to-weight ratio: empty 3.47; standard T-O 2.49; maximum T-O 1.24

Design Features:

3-mode variable transformation; variable geometry wing; vertical take-off and landing; control-configurable vehicle; single-axis thrust vectoring; three "magic hand" manipulators for maintenance use; retractable canopy shield for Battroid mode and atmospheric reentry; option of GBP-1S system, atmospheric-escape booster, or FAST Pack system

Transformation:

Standard time from Fighter to Battroid (automated): under 5 sec.

Min. time from Fighter to Battroid (manual): 0.9 sec.

Armament:

2x Mauler RÖV-20 anti-aircraft laser cannon, firing 6,000 pulses per minute

1x Howard GU-11 55 mm three-barrel Gatling gun pod with 200 RPG, fired at 1,200 rds/min

4x underwing hard points for a wide variety of ordnance, including…

12x AMM-1 hybrid guided multipurpose missiles (3/point), or

12x MK-82 LDGB conventional bombs (3/point), or

6x RMS-1 large anti-ship reaction missiles (2/outboard point, 1/inboard point), or

4x UUM-7 micro-missile pods (1/point) each carrying 15 x Bifors HMM-01 micro-missiles,

or a combination of above load-outs

2x auxiliary hardpoints on the legs for light loads like a FLIR sensor, laser rangefinder/

target designator or ECM pod (typically not used for offensive ordnance)

The kit and its assembly:

This fictional VF-1 was born from spontaneous inspiration and the question if the USMC could have adopted the Valkyrie within the Macross time frame and applied its rather special grey/green/black paint scheme from the Nineties that was carried by AH-1s, CH-46s and also some OV-10s.

The model is a simple, vintage ARII VF-1 in Fighter mode, in this case a VF-1D two-seater that received the cockpit section and the head unit from a VF-1J Gerwalk model to create a single seater. While the parts are interchangeable, the Gerwalk and the Fighter kit have different molds for the cockpit sections and the canopies, too. This is mostly evident through the lack of a front landing gear well under the Gerwalk's cockpit - I had to "carve" a suitable opening into the bottom of the nose, but that was not a problem.

The kit was otherwiese built OOB, with the landing gear down and (finally, after the scenic flight pictures) with an open canopy for final display among the rest of my VF-1 fleet. However, I added some non-canonical small details like small hardpoints on the upper legs and the FLIR and targeting pods on them, scratched from styrene bits.

The ordnance was changed from twelve AMM-1 missiles under the wings to something better suited for attack missions. Finding suitable material became quite a challenge, though. I eventually settled on a pair of large laser-guided smart bombs and two pairs of small air-to-ground missile clusters. The LGBs are streamlined 1:72 2.000 lb general purpose bombs, IIRC from a Hobby Boss F-5E kit, and the launch tubes were scratched from a pair of Bazooka starters from an Academy 1:72 P-51 kit. The ventral standard GU-11 pod was retained and modified to hold a scratched wire display for in-flight pictures at its rear end.

Some blade antennae were added around the hull as a standard measure to improve the simple kit’s look. The cockpit was taken OOB, I just added a pilot figure for the scenic shots and the thick canopy was later mounted on a small lift arm in open position.

Painting and markings:

Adapting the characteristic USMC three-tone paint scheme for the VF-1 was not easy; I used the symmetric pattern from the AH-1s as starting point for the fuselage and gradually evolved it onto the wings into an asymmetric free-form pattern, making sure that the areas where low-viz roundels and some vital stencils would sit on grey for good contrast and readability. The tones became authentic: USMC Field Green (FS 34095, Humbrol 105), USN Medium Grey (FS 35237, Humbrol 145) and black (using Revell 06 Tar Black, which is a very dark grey and not pure black). For some contrast the wings' leading edges were painted with a sand brown/yellow (Humbrol 94).

The landing gear became standard white (Revell 301), the cockpit interior medium grey (Revell 47) with a black ejection seat with brown cushions, and the air intakes as well as the interior of the VG wings dark grey (Revell 77). To set the camouflaged nose radome apart I gave it a slightly different shade of green. The GU-11 pod became bare metal (Revell 91). The LGBs were painted olive drab overall while the AGMs became light grey.

Roundels as well as the UNSMC and unit tags were printed at home in black on clear decal sheet. The unit markings came from an Academy OV-10. The modex came from an 1:72 Revell F8F sheet. Stencils becvame eitrher black or white to keep the low-viz look, just a few tiny color highlights bereak the camouflage up. Some of the characteristic vernier thrusters around the hull are also self-made decals.

Finally, after some typical details and position lights were added with clear paint over a silver base, the small VF-1 was sealed with a coat of matt acrylic varnish.

A spontaneous interim project - and the UMSC's three-tone paint scheme suits the VF-1 well, which might have been a very suitable aircraft for this service and its mission profiles. I am still a bit uncertain about the camouflage's effectiveness, though - yes, it's disruptive, but the color contrasts are so high that a hiding effect seems very poor, even though I find that the scheme works well over urban terrain? It's fictional, though, and even though there are canonical U.N.S. Marines VF-1s to be found in literature, none I came across so far carried this type of livery.

Some background:

The VF-1 was developed by Stonewell/Bellcom/Shinnakasu for the U.N. Spacy by using alien Overtechnology obtained from the SDF-1 Macross alien spaceship. The space-capable VF-1's combat debut was on February 7, 2009, during the Battle of South Ataria Island - the first battle of Space War I - and remained the mainstay fighter of the U.N. Spacy for the entire conflict. Introduced in 2008, the VF-1 would be out of frontline service just five years later, though.

Furthermore, the VF-1EX was also outfitted with other electronic contingency functions like AI-assisted flight and remote override controls. Some of these features could be disabled according to necessity or pilot preferences. The gun pod unit was retained but was usually only loaded with paintball rounds for mock combat. For the same purpose, one of the original Mauler RÖV-20 anti-aircraft laser cannon in the "head unit" was replaced by a long-range laser target designator. AMM-1 missiles with dummy warheads or other training ordnance could be added to the wing hardpoints, but the VF-1EX was never seen being equipped this way - it remained an agile dogfighter.

General characteristics:

All-environment variable fighter and tactical combat Battroid. 3-mode variable transformation; variable geometry wing; vertical take-off and landing; control-configurable vehicle; single-axis thrust vectoring; three "magic hand" manipulators for maintenance use; retractable canopy shield for Battroid mode and atmospheric reentry; EG-01M/MP EX-Gear system; option of GBP-1S system, atmospheric-escape booster, or FAST Pack system.

Accommodation:

Single pilot in Marty & Beck Mk-7 zero/zero ejection seat

Dimensions:

Battroid Mode:

Height 12.68 meters

Width 7.3 meters

Length 4.0 meters

Fighter Mode:

Length 14.23 meters

Wingspan 14.78 meters (at 20° minimum sweep)

Height 3.84 meters

Empty weight: 13.25 metric tons

Standard take-off mass: 18.5 metric tons

MTOW: 37.0 metric tons

Power Plant:

2x Shinnakasu Heavy Industry/P&W/Roice FF-2001 thermonuclear reaction turbine engines, output 650 MW each, rated at 11,500 kg in standard or in overboost (225.63 kN x 2);

4x Shinnakasu Heavy Industry NBS-1 high-thrust vernier thrusters (1 x counter reverse vernier thruster nozzle mounted on the side of each leg nacelle/air intake, 1 x wing thruster roll control system on each wingtip);

18x P&W LHP04 low-thrust vernier thrusters beneath multipurpose hook/handles

Performance:

Battroid Mode: maximum walking speed 160 km/h

Fighter Mode: at 10,000 m Mach 2.71; at 30,000+ m Mach 3.87

g limit: in space +7

Thrust-to-weight ratio: empty 3.47; standard TOW 2.49; maximum TOW 1.24

Transformation:

Standard time from Fighter to Battroid (automated): under 5 sec.

Min. time from Fighter to Battroid (manual): 0.9 sec.

Armament:

1x Mauler RÖV-20 anti-aircraft laser cannon in the "head" unit, firing 6,000 pulses per minute

1x Howard GU-11 55 mm three-barrel Gatling gun pod with 200 RPG, fired at 1,200 rpm

4x underwing hardpoints for a wide variety of ordnance

The kit and its assembly:

The VF-1EX Valkyrie is a Variable Fighter introduced in the Macross Δ television series, and it's, as described above, a replica training variant that resembles outwardly the VF-1J. There's even a Hasegawa 1:72 kit from 2016 of this obscure variant.

However, what I tried to recreate is a virtual (and purely fictional/non-canonical) VF-1EX, re-skinned by someone called David L. on the basis of a virtual VF-1S 3D model with a 2 m wing span (sounds like ~1:8 scale) for the Phoenix R/C simulator software. Check this for reference: www.supermotoxl.com/projects-articles/ready-to-drive-fly-...). How bizarre can things be/become? And how sick is a hardware model of it, though...?

I found the complex livery very attractive and had the plan to build a 1:100 model for some years now. But it took this long to gather enough mojo to tackle this project, due to the tricolor paint scheme's complex nature...

The "canvas" for this stunt is a vintage Arii 1:100 VF-1 kit, built OOB except for some standard mods. The kit was actually a VF-1A, but I had a spare VF-1J head unit in store as a suitable replacement. Externally, some dorsal blade aerials and vanes on the nose were added, the attachment points under the wings for the pylons were PSRed away. A pilot figure was added to the cockpit because this model would be displayed in flight. As a consequence, the ventral gun pod received an adapter at its tail and I added one of my home-brew wire displays, created on the basis of the kit's OOB plastic base.

Painting and markings:

As mentioned above, this VF-1 is based on a re-skinned virtual R/C model, and its creator apparently took inspiration from a canonical VF fighter, namely a VF-31C "Siegfried", and specifically the "Mirage Farina Jenius Custom" version from the Macross Δ series that plays around 2051. Screenshots from the demo flight video under the link above provided various perspectives as painting reference, but the actual implementation on the tiny model caused serious headaches.

The VF-1's shapes are rather round and curvy, the model's jagged surface and small size prohibited masking. The kit is IMHO also best built and painted in single sub-assemblies, but upon closer inspection the screenshots revealed some marking inconsistencies (apparently edited from various videos?), and certain areas were left uncertain, e .g. the inside of the legs or the whole belly area. Therefore, this model is just a personal interpretation of the design, and as such I also deviated in the markings.

The paints became Humbrol 20 (Crimson) and 58 (Magenta), plus Revell 301 (Semi-gloss White), and they were applied with brushes. To replicate the edgy and rather fragmented pattern I initially laid down the two reds in a rather rough and thin fashion and painted the white dorsal and ventral areas. Once thoroughly dry, the white edges were quasi-masked with white decal material, either with stripes of various widths or tailored from sheet material, e. g. for the "wedges" on the wings and fins and the dorsal "swallow tail". This went more smoothly than expected, with a very convincing and clean result that i'd never had achieved with brushes alone, even with masking attempts, which would probably have led to chaos and too much paint on the model.

Other details like the grey leading edges or the air intakes were created with grey and black decal material, too.

No weathering was done, since the aircraft would be clean and in pristine condition, but I used a soft pencil to emphasize the engraved panel lines, esp. on white background. The gun pod became grey and the exhausts, painted in Revell 91 (Iron), were treated with graphite for a darker shade and a more metallic look.

Stencils came from the kit's OOB sheet, but only a few, since there was already a lot "going on" on the VF-1's hull. The flash-shaped Xaos insignia and the NUNS markings on legs and wings were printed at home - as well as the small black vernier thrusters all around the hull, for a uniform look. The USN style Modex and the small letter code on the fins came from an Colorado Decals F-5 sheet, for an aggressor aircraft.

Finally, the kit was sealed overall with semi-gloss acrlyic varnish (which turned out glossier than expected...) and position lights etc. added with translucent paint on top of a silver base.

Well, while the VF-1 was built OOB with no major mods and just some cosmetical upgrades, the paint scheme and its finish were more demanding - and I am happy that the "decal masking" trick worked so fine. The paint scheme surely is attractive, even though it IMHO does not really takes the VF-1's lines into account. Nevertheless, I am certain that there are not many models that are actually based on a virtual 1:8 scale 3D model of an iconic SF fighter, so that this VF-1EX might be unique.

Some background:

The VF-1 was developed by Stonewell/Bellcom/Shinnakasu for the U.N. Spacy by using alien Overtechnology obtained from the SDF-1 Macross alien spaceship. Its production was preceded by an aerodynamic proving version of its airframe, the VF-X. Unlike all later VF vehicles, the VF-X was strictly a jet aircraft, built to demonstrate that a jet fighter with the features necessary to convert to Battroid mode was aerodynamically feasible. After the VF-X's testing was finished, an advanced concept atmospheric-only prototype, the VF-0 Phoenix, was flight-tested from 2005 to 2007 and briefly served as an active-duty fighter from 2007 to the VF-1's rollout in late 2008, while the bugs were being worked out of the full-up VF-1 prototype (VF-X-1).

However, the fighter remained active in many second line units and continued to show its worthiness years later, e. g. through Milia Jenius who would use her old VF-1 fighter in defense of the colonization fleet - 35 years after the type's service introduction!

General characteristics:

All-environment variable fighter and tactical combat Battroid,

used by U.N. Spacy, U.N. Navy, U.N. Space Air Force and U.N.Spacy Marines

Accommodation:

Single pilot in Marty & Beck Mk-7 zero/zero ejection seat

Dimensions:

Fighter Mode:

Length 14.23 meters

Wingspan 14.78 meters (at 20° minimum sweep)

Height 3.84 meters

Battroid Mode:

Height 12.68 meters

Width 7.3 meters

Length 4.0 meters

Empty weight: 13.25 metric tons;

Standard T-O mass: 18.5 metric tons;

MTOW: 37.0 metric tons

Power Plant:

2x Shinnakasu Heavy Industry/P&W/Roice FF-2001 thermonuclear reaction turbine engines, output 650 MW each, rated at 11,500 kg in standard or in overboost (225.63 kN x 2)

4x Shinnakasu Heavy Industry NBS-1 high-thrust vernier thrusters (1x counter reverse vernier thruster nozzle mounted on the side of each leg nacelle/air intake, 1x wing thruster roll control system on each wingtip);

18x P&W LHP04 low-thrust vernier thrusters beneath multipurpose hook/handles

Performance:

Battroid Mode: maximum walking speed 160 km/h

Fighter Mode: at 10,000 m Mach 2.71; at 30,000+ m Mach 3.87

g limit: in space +7

Thrust-to-weight ratio: empty 3.47; standard T-O 2.49; maximum T-O 1.24

Design Features:

3-mode variable transformation; variable geometry wing; vertical take-off and landing; control-configurable vehicle; single-axis thrust vectoring; three "magic hand" manipulators for maintenance use; retractable canopy shield for Battroid mode and atmospheric reentry; option of GBP-1S system, atmospheric-escape booster, or FAST Pack system

Transformation:

Standard time from Fighter to Battroid (automated): under 5 sec.

Min. time from Fighter to Battroid (manual): 0.9 sec.

Armament:

2x internal Mauler RÖV-20 anti-aircraft laser cannon, firing 6,000 pulses per minute

1x Howard GU-11 55 mm three-barrel Gatling gun pod with 200 RPG, fired at 1,200 rds/min

4x underwing and 2x underfuselage hard points for a wide variety of ordnance, including:

- 12x AMM-1 hybrid guided multipurpose missiles (3/point), or

- 12x MK-82 LDGB conventional bombs (3/point), or

- 6x RMS-1 large anti-ship reaction missiles (2/outboard point, 1/inboard point), or

- 4x UUM-7 micro-missile pods (1/point) each carrying 15 x Bifors HMM-01 micro-missiles,

- or a combination of above load-outs

The kit and its assembly:

Another build of one of these vintage ARII kits, primarily for the (fictional) livery. This one was inspired by a profile found in a source book (the "VF-1 Master File" from Softbank Publishing), where I found a profile of a late VF-1P from 2024 in a pale, three-tone desert paint scheme, similar to an IDF aircraft, with some white trim on the wings and a white radome. While this machine basically looked attractive, I was a little confused by its supposed operation theatre: Australia. There, over a typical outback landscape, the paint scheme would IMHO hardly work, the tones being much too light and just "wrong". From this, the idea was born to create a "Valkyroo"!

Since the model would rather center around the paint scheme, the VF-1, an “S” variant kit, remained basically OOB. Nevertheless, it received some standard mods and some extras. The basic updates include some additional blade antennae (leaving out the dorsal antennae for a Block 13/14 aircraft), a pilot figure and a modified dashboard. This time the VF-1 would have its landing gear extended, but the ventral gun pod was nevertheless modified to accept one of my home-made VF-1 standard display stands for in-flight beauty pics over the Australian desert.

Since the machine would, in its wraparound paint scheme, rather look like a low-level fighter bomber and mud mover, the ordnance was changed from a dozen AMM-1 air-to-air missiles to something grittier. I gave the kit a pair of GBUs on the inner wing stations, which are Paveway bombs from an 1:72 Hasegawa ordnance set, but modified into optically-guided weapons since the original laser sensor with its ring-shaped stabilizer would be quite large at 1:100.

On the outer pylons the VF-1 received four streamlined pods with unguided missiles, left over from KP MiG-21s which are pretty small and slender for their 1:72 scale. Under the 1:100 VF-1 they work well.

I furthermore gave it another pair of hardpoints under the air intakes, holding an ECM and a FLIR pod (both from a Dragon 1:144 RAF Tornado GR.1, the FLIR is a reversed chaff dispenser w/o fins). That’s not canonical, but this one here is fictional, anyway.

On the legs, small chaff/flare dispensers made from styrene strips were added, and small radar warning fairings adorn the nose and the tail. Thin styrene profile strips were added on the legs and the fins, for a little more external structure, and a small laser range finder fairing was mounted under the VF-1’s nose (also from the 1:144 Tonka).

In order to emphasize this Valkyrie's updated and modified status, I modified the horribly misshaped “S” head unit, lowering and narrowing the cranium’s rear part and reducing the number of lasers from four to just two. For the in-flight pictures a pilot figure was added to the cockpit, which also had the dashboard extended downwards to the console between the pilot’s feet.

Painting and markings:

The goal was to apply an effective (and potentially) attractive paint scheme that would be appropriate for the Australian desert/outback landscape, with its distinct red sand, low, pale shrubs and occasional dark rocks and trees. I checked both RAAF schemes as well as landscape pictures, and eventually created a four-tone wraparound scheme, somewhat inspired by unique RAAF DHC-4s and Pilatus Porter transporter liveries, as well as the SAC bomber scheme that was/is used on RAAF C-130. The US Army MERCD scheme also has some influence. However, the result is not a copy of an existing scheme, the scheme rather evolved gradually – even though, once it was done, it somewhat reminds of the famous Swedish “Fields & Meadows” pattern, just with lighter colors, even though this was not intended!

Due to the model’s small size and the potentially bright Australian theatre of operation, I did not want the disruptive scheme to become too dark. Consequently, the wraparound scheme consists of four tones: splotches of Brown Yellow (Humbrol 94) and IJN Grey Green (Tamiya XF-76), two tones with similar brightness, are the basis. Next came a medium red brown (Leather, Humbrol 62) and finally some Bronze Green (Humbrol 75), the latter intended to break up the aircraft's silhouette through a strong color contrast.

For a subtle counter-shading effect against the sky, relatively more of the Sand and IJN Grey Green was used on the undersides and the dark green was not applied underneath at all. The radome, in order to set it slightly apart from the rest of the airframe, as well as some other dielectric fairings, were painted with Hemp (Humbrol 168).

The cockpit became standard medium grey (Humbrol 140) with a brown seat. The landing gear was painted in classic white, while the air intakes and some other openings were painted in dark grey (Revell 77).

In an attempt to further subdue the aircraft's overall visual profile, I avoided any flashy trim and rather went for monochrome markings in black. The low-viz U.N. Spacy “kite” roundels were created and printed at home. The eagle emblems on the fins belong, in real life, to an F-15E prototype (Italeri kit), the tactical codes were puzzled together from A-10 and T-4 decal sheets. Most characteristic VF-1 stencils come from the OOB sheet, some lines were created with generic decal material.

Due to the model’s small size, only some light, overall dry-brushing with hemp and light grey was done, and then the kit was finally sealed with matt acrylic varnish (Italeri).

A camouflaged VF-1 surely looks odd, esp. in desert colors, but there actually are several canonical aircraft painted in such a fashion, to be found in various official Macross publications - in fact, this model is the attempt to create a more plausible livery than one that I found in such a sourcebook. IMHO, the home-brew disruptive four-tone scheme for this "Valkyroo" VF-1 looks quite attractive, and thanks to the selected tones it also makes the subtle Australia connection. Those small Valkyrie kits never get boring, at least to me! :D

Some background:

The VF-1 was developed by Stonewell/Bellcom/Shinnakasu for the U.N. Spacy by using alien Overtechnology obtained from the SDF-1 Macross alien spaceship. Its production was preceded by an aerodynamic proving version of its airframe, the VF-X. Unlike all later VF vehicles, the VF-X was strictly a jet aircraft, built to demonstrate that a jet fighter with the features necessary to convert to Battroid mode was aerodynamically feasible. After the VF-X's testing was finished, an advanced concept atmospheric-only prototype, the VF-0 Phoenix, was flight-tested from 2005 to 2007 and briefly served as an active-duty fighter from 2007 to the VF-1's rollout in late 2008, while the bugs were being worked out of the full-up VF-1 prototype (VF-X-1).

However, the fighter remained active in many second line units and continued to show its worthiness years later, e. g. through Milia Jenius who would use her old VF-1 fighter in defense of the colonization fleet - 35 years after the type's service introduction!

General characteristics:

All-environment variable fighter and tactical combat Battroid,

used by U.N. Spacy, U.N. Navy, U.N. Space Air Force and U.N.S. Marine Corps

Accommodation:

Pilot only in Marty & Beck Mk-7 zero/zero ejection seat

Dimensions:

Fighter Mode:

Length 14.23 meters

Wingspan 14.78 meters (at 20° minimum sweep)

Height 3.84 meters

Battroid Mode:

Height 12.68 meters

Width 7.3 meters

Length 4.0 meters

Empty weight: 13.25 metric tons;

Standard T-O mass: 18.5 metric tons;

MTOW: 37.0 metric tons

Power Plant:

2x Shinnakasu Heavy Industry/P&W/Roice FF-2001 thermonuclear reaction turbine engines, output 650 MW each, rated at 11,500 kg in standard or 225.63 kN in overboost

4x Shinnakasu Heavy Industry NBS-1 high-thrust vernier thrusters (1 x counter reverse vernier thruster nozzle mounted on the side of each leg nacelle/air intake, 1 x wing thruster roll control system on each wingtip)

18x P&W LHP04 low-thrust vernier thrusters beneath multipurpose hook/handles

Performance:

Battroid Mode: maximum walking speed 160 km/h

Fighter Mode: at 10,000 m Mach 2.71; at 30,000+ m Mach 3.87

g limit: in space +7

Thrust-to-weight ratio: empty 3.47; standard T-O 2.49; maximum T-O 1.24

Design Features:

3-mode variable transformation; variable geometry wing; vertical take-off and landing; control-configurable vehicle; single-axis thrust vectoring; three "magic hand" manipulators for maintenance use; retractable canopy shield for Battroid mode and atmospheric reentry; option of GBP-1S system, atmospheric-escape booster, or FAST Pack system

Transformation:

Standard time from Fighter to Battroid (automated): under 5 sec.

Min. time from Fighter to Battroid (manual): 0.9 sec.

Armament:

2x Mauler RÖV-20 anti-aircraft laser cannon, firing 6,000 pulses per minute

1x Howard GU-11 55 mm three-barrel Gatling gun pod with 200 RPG, fired at 1,200 rds/min

4x underwing hard points for a wide variety of ordnance, including…

12x AMM-1 hybrid guided multipurpose missiles (3/point), or

12x MK-82 LDGB conventional bombs (3/point), or

6x RMS-1 large anti-ship reaction missiles (2/outboard point, 1/inboard point), or

4x UUM-7 micro-missile pods (1/point) each carrying 15 x Bifors HMM-01 micro-missiles,

or a combination of above load-outs

2x auxiliary hardpoints on the legs for light loads like a FLIR sensor, laser rangefinder/

target designator or ECM pod (typically not used for offensive ordnance)

The kit and its assembly:

This fictional VF-1 was born from spontaneous inspiration and the question if the USMC could have adopted the Valkyrie within the Macross time frame and applied its rather special grey/green/black paint scheme from the Nineties that was carried by AH-1s, CH-46s and also some OV-10s.

The model is a simple, vintage ARII VF-1 in Fighter mode, in this case a VF-1D two-seater that received the cockpit section and the head unit from a VF-1J Gerwalk model to create a single seater. While the parts are interchangeable, the Gerwalk and the Fighter kit have different molds for the cockpit sections and the canopies, too. This is mostly evident through the lack of a front landing gear well under the Gerwalk's cockpit - I had to "carve" a suitable opening into the bottom of the nose, but that was not a problem.

The kit was otherwiese built OOB, with the landing gear down and (finally, after the scenic flight pictures) with an open canopy for final display among the rest of my VF-1 fleet. However, I added some non-canonical small details like small hardpoints on the upper legs and the FLIR and targeting pods on them, scratched from styrene bits.

The ordnance was changed from twelve AMM-1 missiles under the wings to something better suited for attack missions. Finding suitable material became quite a challenge, though. I eventually settled on a pair of large laser-guided smart bombs and two pairs of small air-to-ground missile clusters. The LGBs are streamlined 1:72 2.000 lb general purpose bombs, IIRC from a Hobby Boss F-5E kit, and the launch tubes were scratched from a pair of Bazooka starters from an Academy 1:72 P-51 kit. The ventral standard GU-11 pod was retained and modified to hold a scratched wire display for in-flight pictures at its rear end.

Some blade antennae were added around the hull as a standard measure to improve the simple kit’s look. The cockpit was taken OOB, I just added a pilot figure for the scenic shots and the thick canopy was later mounted on a small lift arm in open position.

Painting and markings:

Adapting the characteristic USMC three-tone paint scheme for the VF-1 was not easy; I used the symmetric pattern from the AH-1s as starting point for the fuselage and gradually evolved it onto the wings into an asymmetric free-form pattern, making sure that the areas where low-viz roundels and some vital stencils would sit on grey for good contrast and readability. The tones became authentic: USMC Field Green (FS 34095, Humbrol 105), USN Medium Grey (FS 35237, Humbrol 145) and black (using Revell 06 Tar Black, which is a very dark grey and not pure black). For some contrast the wings' leading edges were painted with a sand brown/yellow (Humbrol 94).

The landing gear became standard white (Revell 301), the cockpit interior medium grey (Revell 47) with a black ejection seat with brown cushions, and the air intakes as well as the interior of the VG wings dark grey (Revell 77). To set the camouflaged nose radome apart I gave it a slightly different shade of green. The GU-11 pod became bare metal (Revell 91). The LGBs were painted olive drab overall while the AGMs became light grey.

Roundels as well as the UNSMC and unit tags were printed at home in black on clear decal sheet. The unit markings came from an Academy OV-10. The modex came from an 1:72 Revell F8F sheet. Stencils becvame eitrher black or white to keep the low-viz look, just a few tiny color highlights bereak the camouflage up. Some of the characteristic vernier thrusters around the hull are also self-made decals.

Finally, after some typical details and position lights were added with clear paint over a silver base, the small VF-1 was sealed with a coat of matt acrylic varnish.

A spontaneous interim project - and the UMSC's three-tone paint scheme suits the VF-1 well, which might have been a very suitable aircraft for this service and its mission profiles. I am still a bit uncertain about the camouflage's effectiveness, though - yes, it's disruptive, but the color contrasts are so high that a hiding effect seems very poor, even though I find that the scheme works well over urban terrain? It's fictional, though, and even though there are canonical U.N.S. Marines VF-1s to be found in literature, none I came across so far carried this type of livery.

Some background:

The VF-1 was developed by Stonewell/Bellcom/Shinnakasu for the U.N. Spacy by using alien Overtechnology obtained from the SDF-1 Macross alien spaceship. Its production was preceded by an aerodynamic proving version of its airframe, the VF-X. Unlike all later VF vehicles, the VF-X was strictly a jet aircraft, built to demonstrate that a jet fighter with the features necessary to convert to Battroid mode was aerodynamically feasible. After the VF-X's testing was finished, an advanced concept atmospheric-only prototype, the VF-0 Phoenix, was flight-tested from 2005 to 2007 and briefly served as an active-duty fighter from 2007 to the VF-1's rollout in late 2008, while the bugs were being worked out of the full-up VF-1 prototype (VF-X-1).

However, the fighter remained active in many second line units and continued to show its worthiness years later, e. g. through Milia Jenius who would use her old VF-1 fighter in defense of the colonization fleet - 35 years after the type's service introduction!

General characteristics:

All-environment variable fighter and tactical combat Battroid,

used by U.N. Spacy, U.N. Navy, U.N. Space Air Force

Accommodation:

Pilot only in Marty & Beck Mk-7 zero/zero ejection seat

Dimensions:

Fighter Mode:

Length 14.23 meters

Wingspan 14.78 meters (at 20° minimum sweep)

Height 3.84 meters

Battroid Mode:

Height 12.68 meters

Width 7.3 meters

Length 4.0 meters

Empty weight: 13.25 metric tons;

Standard T-O mass: 18.5 metric tons;

MTOW: 37.0 metric tons

Power Plant:

2x Shinnakasu Heavy Industry/P&W/Roice FF-2001 thermonuclear reaction turbine engines, output 650 MW each, rated at 11,500 kg in standard or in overboost (225.63 kN x 2)

4x Shinnakasu Heavy Industry NBS-1 high-thrust vernier thrusters (1 x counter reverse vernier thruster nozzle mounted on the side of each leg nacelle/air intake, 1 x wing thruster roll control system on each wingtip);

18x P&W LHP04 low-thrust vernier thrusters beneath multipurpose hook/handles

Performance:

Battroid Mode: maximum walking speed 160 km/h

Fighter Mode: at 10,000 m Mach 2.71; at 30,000+ m Mach 3.87

g limit: in space +7

Thrust-to-weight ratio: empty 3.47; standard T-O 2.49; maximum T-O 1.24

Design Features:

3-mode variable transformation; variable geometry wing; vertical take-off and landing; control-configurable vehicle; single-axis thrust vectoring; three "magic hand" manipulators for maintenance use; retractable canopy shield for Battroid mode and atmospheric reentry; option of GBP-1S system, atmospheric-escape booster, or FAST Pack system

Transformation:

Standard time from Fighter to Battroid (automated): under 5 sec.

Min. time from Fighter to Battroid (manual): 0.9 sec.

Armament:

2x internal Mauler RÖV-20 anti-aircraft laser cannon, firing 6,000 pulses per minute

1x Howard GU-11 55 mm three-barrel Gatling gun pod with 200 RPG, fired at 1,200 rds/min

4x underwing hard points for a wide variety of ordnance, including

12x AMM-1 hybrid guided multipurpose missiles (3/point), or

12x MK-82 LDGB conventional bombs (3/point), or

6x RMS-1 large anti-ship reaction missiles (2/outboard point, 1/inboard point), or

4x UUM-7 micro-missile pods (1/point) each carrying 15 x Bifors HMM-01 micro-missiles,

or a combination of above load-outs

The kit and its assembly:

Well, once in a while I dig one of these vintage ARII kits out of the mecha pile and let the spirits flow. This time it was a distraction from Corona cabin fever, and this Valkyrie is heavily based on a profile drawing published in the Macross source book “Variable Fighter Master File VF-1 Valkyrie”, p. 122; an online version of this profile can be found here:

mechajournal.com/wp-content/uploads/2016/03/2010-1-SVF-65...

It shows aircraft “100”, though, the machine of SVF-65’s squadron leader, a VF-1 in an all-light blue livery with blue and white trim and some exotic details like a blue canopy frame or a yellow buzz number. I always found this scheme quite attractive, so I decided to replicate it with a model.

However, I was not able to 100% copy the look of “NE 100”, so I rather decided to build a standard fighter from this unit, with a slightly less flashy livery but still as close to the benchmark as possible.

Concerning the model, it’s another vintage ARII VF-1, in this case a basic VF-1A. It was built OOB, with the landing gear retracted, a scratched wire display that sticks in the gun pod’s rear end and holds the Valkyrie in flight, and the simple model received a few standard personal updates like a pilot figure and some blade antennae. The ordnance is strictly OOB.

Painting and markings:

The basic colors are Humbrol 47 (Sea Blue) overall, with white (Revell 301, a very pure/cold tone) on nose and fins and dark blue (Humbrol 15, Midnight Blue) and medium blue (Humbrol 48, Mediterranean Blue) trim lines. As mentioned above, I tried to stay as close to the benchmark profile as possible, and this posed some challenges.

Painting was done, as usual, only with brushes. The trim on fins, legs and wings was created with paint and masking, while the cheatlines under the cockpit were “faked” with enamel paint on decal sheet, since masking would have been a messy affair in this section of the tiny model. The grey leading edges on wings and fins were done with decal material, too.

After a black ink wash, very light post-shading was added. The decals and stencils come mostly from the OOB sheet, which turned out to be tough customers because it took them ages to detach from the carrier paper. The tactical codes were gathered from the scrap box: the “114”s come from a 1:72 Canadair Tutor trainer (their BuNo), the “NE” code on the fin with 3D effect was created from yellow and black single letters of the same size placed one above the other. The “SVF-65”, “ARMD-5” and “AKAGI” tags were created at home with an ink jet printer and respective clear carrier film.

Finally, after some typical highlights with clear paint had been added, the small VF-1 was sealed with a semi-gloss acrylic varnish.

A small and quick interim project, realized in just a few days – most time passed while waiting for the gloss Humbrol enamels to cure properly. There are certainly better VF-1 kits, but I just love those simple vintage ARII models. Staying close to the benchmark profile was quite a challenge, but worked out fine, and the compromise of a “normal” fighter of the unit with slightly simplified markings turned out well. And it’s certainly not the last Valkyrie of this kind to come…

+++ DISCLAIMER +++

Nothing you see here is real, even though the conversion or the presented background story might be based on authentic facts. BEWARE!

Some background:

The VF-1 was developed by Stonewell/Bellcom/Shinnakasu for the U.N. Spacy by using alien Overtechnology obtained from the SDF-1 Macross alien spaceship. Its production was preceded by an aerodynamic proving version of its airframe, the VF-X. Unlike all later VF vehicles, the VF-X was strictly a jet aircraft, built to demonstrate that a jet fighter with the features necessary to convert to Battroid mode was aerodynamically feasible. After the VF-X's testing was finished, an advanced concept atmospheric-only prototype, the VF-0 Phoenix, was flight-tested from 2005 to 2007 and briefly served as an active-duty fighter from 2007 to the VF-1's rollout in late 2008, while the bugs were being worked out of the full-up VF-1 prototype (VF-X-1).

However, the fighter remained active in many second line units and continued to show its worthiness years later, e. g. through Milia Jenius who would use her old VF-1 fighter in defense of the colonization fleet - 35 years after the type's service introduction!

General characteristics:

All-environment variable fighter and tactical combat Battroid,

used by U.N. Spacy, U.N. Navy, U.N. Space Air Force

Accommodation:

Pilot only in Marty & Beck Mk-7 zero/zero ejection seat

Dimensions:

Fighter Mode:

Length 14.23 meters

Wingspan 14.78 meters (at 20° minimum sweep)

Height 3.84 meters

Battroid Mode:

Height 12.68 meters

Width 7.3 meters

Length 4.0 meters

Empty weight: 13.25 metric tons;

Standard T-O mass: 18.5 metric tons;

MTOW: 37.0 metric tons

Power Plant:

2x Shinnakasu Heavy Industry/P&W/Roice FF-2001 thermonuclear reaction turbine engines, output 650 MW each, rated at 11,500 kg in standard or in overboost (225.63 kN x 2)

4 x Shinnakasu Heavy Industry NBS-1 high-thrust vernier thrusters (1 x counter reverse vernier thruster nozzle mounted on the side of each leg nacelle/air intake, 1 x wing thruster roll control system on each wingtip);

18 x P&W LHP04 low-thrust vernier thrusters beneath multipurpose hook/handles

The S-FAST Pack added 4x P&W+EF-2001 booster thrusters with 120.000 kg each, plus a total of 28x P&W LHP04 low-thrust vernier thrusters

Performance:

Battroid Mode: maximum walking speed 160 km/h

Fighter Mode: at 10,000 m Mach 2.71; at 30,000+ m Mach 3.87

g limit: in space +7

Thrust-to-weight ratio: empty 3.47; standard T-O 2.49; maximum T-O 1.24

Design Features:

3-mode variable transformation; variable geometry wing; vertical take-off and landing; control-configurable vehicle; single-axis thrust vectoring; three "magic hand" manipulators for maintenance use; retractable canopy shield for Battroid mode and atmospheric reentry; option of GBP-1S system, atmospheric-escape booster, or FAST Pack system

Transformation:

Standard time from Fighter to Battroid (automated): under 5 sec.

Min. time from Fighter to Battroid (manual): 0.9 sec.

Armament:

2x internal Mauler RÖV-20 anti-aircraft laser cannon, firing 6,000 pulses per minute

1x Howard GU-11 55 mm three-barrel Gatling gun pod with 200 RPG, fired at 1,200 rds/min

4x underwing hard points for a wide variety of ordnance, including

12x AMM-1 hybrid guided multipurpose missiles (3/point), or

12x MK-82 LDGB conventional bombs (3/point), or

6x RMS-1 large anti-ship reaction missiles (2/outboard point, 1/inboard point), or

4x UUM-7 micro-missile pods (1/point) each carrying 15 x Bifors HMM-01 micro-missiles,

or a combination of above load-outs

The optional Shinnakasu Heavy Industry S-FAST Pack 2.1 augmentative space weapon system added:

6x micro-missiles in two NP-AR-01 micro-missile launcher pods (mounted rear-ward under center ventral section in Fighter mode or on lower arm sections in GERWALK/Battroid mode)

4x12 micro missiles in four HMMP-02 micro-missile launchers, one inside each booster pod

The kit and its assembly:

This VF-1 is another contribution to the “Old Kit” Group Build at whatifmodelers.com, running in late 2016. I am not certain about the moulds’ inception date, but since it is an ARII incarnation of this type of kit and even moulded in the early pastel green styrene, I’d think that it was produced in 1982 or 83.

Anyway, I love the Macross VF-1, IMHO a design masterpiece created by Shoji Kawamori and one of my favorite mecha designs ever, because it was created as a late 70ies style jet fighter that could transform into a robot in a secondary role. As a simple, purposeful military vehicle. And not like a flashy robot toy.

Effectively, this Super Valkyrie is a highly modified OOB kit with many donation parts, and this kit is a bit special, for several reasons. There are several 1:100 OOB kits with FAST Packs from ARII/Bandai available (and still around today), but these are normally only Battroids or Gerwalks with additional parts for the FAST kit conversion. The kit I used here is different: it is, after maybe 25 years of searching and building these kits, the #70 from the original production run. It is (so far!) the only Fighter mode kit with the additional FAST Pack parts! Must be rare, and I have never seen it in catalogues?

Until today, I converted my Super or Strike Valkyries from Gerwalk kits, a task that needs some improvisation esp. around the folded arms between the legs, and there’s no OOB option for an extended landing gear. The latter made this Fighter mode kit very attractive, even though the actual kit is pretty disappointing, and AFAIK this kit variant is only available as a VF-1S.

With the Super Valkyrie fighter kit you receive basically a Gerwalk with a standard fighter cockpit (which includes a front wheel well and an extended front wheel leg), plus extra parts. The leg/engine-mounted NP-FB-01 systems are less bulbous than the parts on the Gerwalk or Battroid kit, and the OOB dorsally mounted NP-BP-01 boosters are TINY, maybe 1:120 or even 1:144! WTF?

Further confusion: the kit includes a set of lower arm parts with integrated rocket launchers, but these are not necessary at all for the Fighter build?! As a kind of compensation there’s a new and exclusive element that simulates the folded arms under the ‘fuselage’ and which, as an added value, properly holds the hand gun under the fuselage. As a quirky flaw, though, the hand gun itself comes in the extended form for the Battroid/Gerwalk mode. For the fighter in flight mode, it has to be modified, but that’s easily done.

Anyway, with the potential option to build a Super Valkyrie with an extended landing gear, this was my route to go with this vintage kit. The Super Valkyrie already looks bulky with the FAST Pack added, but then I recently found the S-FAST Pack option with two more boosters under the wings – total overkill, but unique. And I had a spare pair of booster bulks in the stash (w/o their nozzles, though), as well as a complete pair of additional bigger standard FAST boosters that could replace the ridiculous OOB parts…

Building such a Super/Strike Valkyrie means building separate components, with a marriage of parts as one of the final steps. Consequently, cockpit, central fuselage with the wings and the air intakes, the folded stabilizer pack, the folded arms element with the handgun, the two legs and the four boosters plus other ordnance had to be built and painted separately.

Here and there, details were changed or added, e. g. a different head (a ‘J’ head for the flight leader’s aircraft with two instead of the rare, OOB ‘S’ variant with four laser cannon), covers for the main landing gear (the latter does not come with wells at all, but I did not scratch them since they are hardly recognizable when the kit is sitting on the ground), the typical blade aerials under the cockpit and the feet had to be modified internally to become truly ‘open’ jet exhausts.

The wing-mounted boosters received new nozzles and their front end was re-sculpted with 2C putty into a square shape, according to reference sketches. Not 100% exact, but the rest of the VF-1 isn’t either.

This VF-1 was also supposed to carry external ordnance and my first choice were four wing-mounted RMS-1 Anti-Ship Reaction Warheads, scratched from four 1.000 lb NATO bombs. But, once finished, I was not happy with them. So I looked for another option, and in a source book I found several laser-guided bombs and missiles, also for orbital use, and from this inspiration comes the final ordnance: four rocket-propelled kinetic impact projectiles. These are actually 1:72 JASDF LGB’s from a Hasegawa weapon set, sans aerodynamic steering surfaces and with rocket boosters added to the tail. Also not perfect, but their white color and sleek shape is a good counterpart to the FAST elements.

Experience from many former builds of this mecha kit family helped a lot, since the #70 kit is very basic and nothing really fits well. Even though there are not many major seams or large elements, PSR work was considerable. This is not a pleasant build, rather a fight with a lot of compromises and semi-accuracies.

Seriously, if you want a decent 1:100 VF-1, I’d rather recommend the much more modern WAVE kits (including more realistic proportions).

Painting and markings:

The paint scheme for this Super Valkyrie was settled upon before I considered the S-FAST Pack addition: U.N. Spacy’s SVF-124 is authentic, as well as its unique camouflage paint scheme.

The latter is a special scheme for the lunar environment where the unit was originally formed and based, with all-black undersides, a high, wavy waterline and a light grey upper surface, plus some medium grey trim and a few colorful US Navy style markings and codes.

My core reference is a ‘naked’ bread-and-butter VF-1A of SVF-124 in Fighter mode, depicted as a profile in a VF-1 source book from SoftBank Publishing. The colors for the FAST Pack elements are guesstimates and personal interpretations, though, since I could not find any reference for their look in this unit.

As a side note, another, later SVF-124 aircraft in a similar design is included as an option in a limited edition 1:72 VF-22S kit from Hasegawa, which is backed by CG pics in a VF-22 source book from Softbank, too.

Furthermore, SVF-124 finds mention in a Japanese modeler magazine, where the aforementioned VF-22S kit was presented in 2008. So there must be something behind the ‘Moon Shooters’ squadron.

According to the Hasegawa VF-22S’s painting instructions, the underside becomes black and the upper surfaces are to be painted with FS36270 (with some darker fields on the VF-22, though, similar to the USAF F-15 counter-shaded air superiority scheme, just a tad darker).

Due to the 1:100 scale tininess of my VF-1, I alternatively went for Revell 75 (RAL 7039), which is lighter and also has a brownish hue, so that the resulting aircraft would not look too cold and murky, and not resemble an USAF aircraft.

All FAST Pack elements were painted in a uniform dark grey (Humbrol 32), while some subtle decorative trim on the upper surfaces, e.g. the canopy frame, an anti-glare panel and a stripe behind the cockpit and decoration trim on the wings’ upper surfaces, was added with Revell 77 (RAL 7012). Overall, colors are rather dull, but IMHO very effective in the “landscape” this machine is supposed to operate, and the few colorful markings stand out even more!

The cockpit interior was painted in a bluish grey, with reddish brown seat cushions (late 70ies style!), and the landing gear became all white. For some added detail I painted the wings’ leading edges in a mustard tone (Humbrol 225, Mid Stone).

The kit received some weathering (black ink wash, drybrushing on panels) and extra treatment of the panel lines – even though the FAST Pack elements hide a lot of surface or obscure view.

More color and individuality came with the markings. The standard decals like stencils or the U.N. Spacy insignia come from the kit’s and some other VF-1s’ OOB sheets.

Based on the SVF-124 VF-1 profile and taking the basic design a bit further, I used dull red USAF 45° digits for the 2nd flight leader’s “200” modex and the Apollo Base’s code “MA” on the dorsal boosters. Some discreet red trim was also applied to the FAST Packs – but only a little.

Since all of SVF-124’s aircraft are rumored to carry personal markings, including nose art and similar decorations, I tried to give this VF-1JS a personal note: the pin-up badges on the dorsal boosters come from a Peddinghouse decal sheet for Allied WWII tanks, placed on a silver roundel base. Unfortunately (and not visible before I applied them) the pin-up decal was not printed on a white basis, so that the contrast on the silver is not very strong, but I left it that way. Additionally, the tagline “You’re a$$ next, Jerry” (which IS printed in opaque white…?) was added next to the artwork – but it’s so tiny that you have to get really close to decipher it at all…

Finally, after some soot stains around the exhausts and some vernier nozzels with graphite, the kit received a coat of matt acrylic varnish.

Building this vintage VF-1 kit took a while and a lot of effort, but I like the result: with the S-FAST Pack, the elegant VF-1 turned into a massive space fighter hulk! The normal Super Valkyries already look very compact and purposeful, but this here is truly menacing. Especially when standing on its own feet/landing gear, with its nose-down stance and the small, original wheels, this thing reminds of a Space Shuttle that had just landed.

Good that I recently built a simple VF-1 fighter as a warm-up session. ARII’s kit #70 is not a pleasant build, rather a fight with the elements and coupled with a lot of compromises – if you want a Super Valkyrie Fighter in 1:100, the much more modern WAVE kit is IMHO the better option (and actually not much more pricey than this vintage collector’s item). But for the vintage feeling, this exotic model kit was just the right ticket, and it turned, despite many weaknesses and rather corny details, into an impressive fighter. Esp. the lunar camouflage scheme looks odd, but very unique and purposeful.

Anyway, with so many inherent flaws of the ARII kit, my former method of converting a pure (and much more common) Gerwalk kit into a space-capable VF-1 fighter is not less challenging and complicated than trying to fix this OOB option into a decent model. :-/

+++ DISCLAIMER +++

Nothing you see here is real, even though the conversion or the presented background story might be based on authentic facts. BEWARE!

Some background:

The VF-1 was developed by Stonewell/Bellcom/Shinnakasu for the U.N. Spacy by using alien Overtechnology obtained from the SDF-1 Macross alien spaceship. Its production was preceded by an aerodynamic proving version of its airframe, the VF-X. Unlike all later VF vehicles, the VF-X was strictly a jet aircraft, built to demonstrate that a jet fighter with the features necessary to convert to Battroid mode was aerodynamically feasible. After the VF-X's testing was finished, an advanced concept atmospheric-only prototype, the VF-0 Phoenix, was flight-tested from 2005 to 2007 and briefly served as an active-duty fighter from 2007 to the VF-1's rollout in late 2008, while the bugs were being worked out of the full-up VF-1 prototype (VF-X-1).

However, the fighter remained active in many second line units and continued to show its worthiness years later, e. g. through Milia Jenius who would use her old VF-1 fighter in defense of the colonization fleet - 35 years after the type's service introduction!

General characteristics:

All-environment variable fighter and tactical combat Battroid,

used by U.N. Spacy, U.N. Navy, U.N. Space Air Force

Accommodation:

Pilot only in Marty & Beck Mk-7 zero/zero ejection seat

Dimensions:

Fighter Mode:

Length 14.23 meters

Wingspan 14.78 meters (at 20° minimum sweep)

Height 3.84 meters

Battroid Mode:

Height 12.68 meters

Width 7.3 meters

Length 4.0 meters

Empty weight: 13.25 metric tons;

Standard T-O mass: 18.5 metric tons;

MTOW: 37.0 metric tons

Power Plant:

2x Shinnakasu Heavy Industry/P&W/Roice FF-2001 thermonuclear reaction turbine engines, output 650 MW each, rated at 11,500 kg in standard or in overboost (225.63 kN x 2)

4 x Shinnakasu Heavy Industry NBS-1 high-thrust vernier thrusters (1 x counter reverse vernier thruster nozzle mounted on the side of each leg nacelle/air intake, 1 x wing thruster roll control system on each wingtip);

18 x P&W LHP04 low-thrust vernier thrusters beneath multipurpose hook/handles

The S-FAST Pack added 4x P&W+EF-2001 booster thrusters with 120.000 kg each, plus a total of 28x P&W LHP04 low-thrust vernier thrusters

Performance:

Battroid Mode: maximum walking speed 160 km/h

Fighter Mode: at 10,000 m Mach 2.71; at 30,000+ m Mach 3.87

g limit: in space +7

Thrust-to-weight ratio: empty 3.47; standard T-O 2.49; maximum T-O 1.24

Design Features:

3-mode variable transformation; variable geometry wing; vertical take-off and landing; control-configurable vehicle; single-axis thrust vectoring; three "magic hand" manipulators for maintenance use; retractable canopy shield for Battroid mode and atmospheric reentry; option of GBP-1S system, atmospheric-escape booster, or FAST Pack system

Transformation:

Standard time from Fighter to Battroid (automated): under 5 sec.

Min. time from Fighter to Battroid (manual): 0.9 sec.

Armament:

2x internal Mauler RÖV-20 anti-aircraft laser cannon, firing 6,000 pulses per minute

1x Howard GU-11 55 mm three-barrel Gatling gun pod with 200 RPG, fired at 1,200 rds/min

4x underwing hard points for a wide variety of ordnance, including

12x AMM-1 hybrid guided multipurpose missiles (3/point), or

12x MK-82 LDGB conventional bombs (3/point), or

6x RMS-1 large anti-ship reaction missiles (2/outboard point, 1/inboard point), or

4x UUM-7 micro-missile pods (1/point) each carrying 15 x Bifors HMM-01 micro-missiles,

or a combination of above load-outs

The optional Shinnakasu Heavy Industry S-FAST Pack 2.1 augmentative space weapon system added:

6x micro-missiles in two NP-AR-01 micro-missile launcher pods (mounted rear-ward under center ventral section in Fighter mode or on lower arm sections in GERWALK/Battroid mode)

4x12 micro missiles in four HMMP-02 micro-missile launchers, one inside each booster pod

The kit and its assembly:

This VF-1 is another contribution to the “Old Kit” Group Build at whatifmodelers.com, running in late 2016. I am not certain about the moulds’ inception date, but since it is an ARII incarnation of this type of kit and even moulded in the early pastel green styrene, I’d think that it was produced in 1982 or 83.

Anyway, I love the Macross VF-1, IMHO a design masterpiece created by Shoji Kawamori and one of my favorite mecha designs ever, because it was created as a late 70ies style jet fighter that could transform into a robot in a secondary role. As a simple, purposeful military vehicle. And not like a flashy robot toy.

Effectively, this Super Valkyrie is a highly modified OOB kit with many donation parts, and this kit is a bit special, for several reasons. There are several 1:100 OOB kits with FAST Packs from ARII/Bandai available (and still around today), but these are normally only Battroids or Gerwalks with additional parts for the FAST kit conversion. The kit I used here is different: it is, after maybe 25 years of searching and building these kits, the #70 from the original production run. It is (so far!) the only Fighter mode kit with the additional FAST Pack parts! Must be rare, and I have never seen it in catalogues?

Until today, I converted my Super or Strike Valkyries from Gerwalk kits, a task that needs some improvisation esp. around the folded arms between the legs, and there’s no OOB option for an extended landing gear. The latter made this Fighter mode kit very attractive, even though the actual kit is pretty disappointing, and AFAIK this kit variant is only available as a VF-1S.

With the Super Valkyrie fighter kit you receive basically a Gerwalk with a standard fighter cockpit (which includes a front wheel well and an extended front wheel leg), plus extra parts. The leg/engine-mounted NP-FB-01 systems are less bulbous than the parts on the Gerwalk or Battroid kit, and the OOB dorsally mounted NP-BP-01 boosters are TINY, maybe 1:120 or even 1:144! WTF?

Further confusion: the kit includes a set of lower arm parts with integrated rocket launchers, but these are not necessary at all for the Fighter build?! As a kind of compensation there’s a new and exclusive element that simulates the folded arms under the ‘fuselage’ and which, as an added value, properly holds the hand gun under the fuselage. As a quirky flaw, though, the hand gun itself comes in the extended form for the Battroid/Gerwalk mode. For the fighter in flight mode, it has to be modified, but that’s easily done.

Anyway, with the potential option to build a Super Valkyrie with an extended landing gear, this was my route to go with this vintage kit. The Super Valkyrie already looks bulky with the FAST Pack added, but then I recently found the S-FAST Pack option with two more boosters under the wings – total overkill, but unique. And I had a spare pair of booster bulks in the stash (w/o their nozzles, though), as well as a complete pair of additional bigger standard FAST boosters that could replace the ridiculous OOB parts…

Building such a Super/Strike Valkyrie means building separate components, with a marriage of parts as one of the final steps. Consequently, cockpit, central fuselage with the wings and the air intakes, the folded stabilizer pack, the folded arms element with the handgun, the two legs and the four boosters plus other ordnance had to be built and painted separately.

Here and there, details were changed or added, e. g. a different head (a ‘J’ head for the flight leader’s aircraft with two instead of the rare, OOB ‘S’ variant with four laser cannon), covers for the main landing gear (the latter does not come with wells at all, but I did not scratch them since they are hardly recognizable when the kit is sitting on the ground), the typical blade aerials under the cockpit and the feet had to be modified internally to become truly ‘open’ jet exhausts.

The wing-mounted boosters received new nozzles and their front end was re-sculpted with 2C putty into a square shape, according to reference sketches. Not 100% exact, but the rest of the VF-1 isn’t either.

This VF-1 was also supposed to carry external ordnance and my first choice were four wing-mounted RMS-1 Anti-Ship Reaction Warheads, scratched from four 1.000 lb NATO bombs. But, once finished, I was not happy with them. So I looked for another option, and in a source book I found several laser-guided bombs and missiles, also for orbital use, and from this inspiration comes the final ordnance: four rocket-propelled kinetic impact projectiles. These are actually 1:72 JASDF LGB’s from a Hasegawa weapon set, sans aerodynamic steering surfaces and with rocket boosters added to the tail. Also not perfect, but their white color and sleek shape is a good counterpart to the FAST elements.

Experience from many former builds of this mecha kit family helped a lot, since the #70 kit is very basic and nothing really fits well. Even though there are not many major seams or large elements, PSR work was considerable. This is not a pleasant build, rather a fight with a lot of compromises and semi-accuracies.

Seriously, if you want a decent 1:100 VF-1, I’d rather recommend the much more modern WAVE kits (including more realistic proportions).

Painting and markings:

The paint scheme for this Super Valkyrie was settled upon before I considered the S-FAST Pack addition: U.N. Spacy’s SVF-124 is authentic, as well as its unique camouflage paint scheme.

The latter is a special scheme for the lunar environment where the unit was originally formed and based, with all-black undersides, a high, wavy waterline and a light grey upper surface, plus some medium grey trim and a few colorful US Navy style markings and codes.

My core reference is a ‘naked’ bread-and-butter VF-1A of SVF-124 in Fighter mode, depicted as a profile in a VF-1 source book from SoftBank Publishing. The colors for the FAST Pack elements are guesstimates and personal interpretations, though, since I could not find any reference for their look in this unit.

As a side note, another, later SVF-124 aircraft in a similar design is included as an option in a limited edition 1:72 VF-22S kit from Hasegawa, which is backed by CG pics in a VF-22 source book from Softbank, too.

Furthermore, SVF-124 finds mention in a Japanese modeler magazine, where the aforementioned VF-22S kit was presented in 2008. So there must be something behind the ‘Moon Shooters’ squadron.

According to the Hasegawa VF-22S’s painting instructions, the underside becomes black and the upper surfaces are to be painted with FS36270 (with some darker fields on the VF-22, though, similar to the USAF F-15 counter-shaded air superiority scheme, just a tad darker).

Due to the 1:100 scale tininess of my VF-1, I alternatively went for Revell 75 (RAL 7039), which is lighter and also has a brownish hue, so that the resulting aircraft would not look too cold and murky, and not resemble an USAF aircraft.

All FAST Pack elements were painted in a uniform dark grey (Humbrol 32), while some subtle decorative trim on the upper surfaces, e.g. the canopy frame, an anti-glare panel and a stripe behind the cockpit and decoration trim on the wings’ upper surfaces, was added with Revell 77 (RAL 7012). Overall, colors are rather dull, but IMHO very effective in the “landscape” this machine is supposed to operate, and the few colorful markings stand out even more!

The cockpit interior was painted in a bluish grey, with reddish brown seat cushions (late 70ies style!), and the landing gear became all white. For some added detail I painted the wings’ leading edges in a mustard tone (Humbrol 225, Mid Stone).

The kit received some weathering (black ink wash, drybrushing on panels) and extra treatment of the panel lines – even though the FAST Pack elements hide a lot of surface or obscure view.

More color and individuality came with the markings. The standard decals like stencils or the U.N. Spacy insignia come from the kit’s and some other VF-1s’ OOB sheets.

Based on the SVF-124 VF-1 profile and taking the basic design a bit further, I used dull red USAF 45° digits for the 2nd flight leader’s “200” modex and the Apollo Base’s code “MA” on the dorsal boosters. Some discreet red trim was also applied to the FAST Packs – but only a little.

Since all of SVF-124’s aircraft are rumored to carry personal markings, including nose art and similar decorations, I tried to give this VF-1JS a personal note: the pin-up badges on the dorsal boosters come from a Peddinghouse decal sheet for Allied WWII tanks, placed on a silver roundel base. Unfortunately (and not visible before I applied them) the pin-up decal was not printed on a white basis, so that the contrast on the silver is not very strong, but I left it that way. Additionally, the tagline “You’re a$$ next, Jerry” (which IS printed in opaque white…?) was added next to the artwork – but it’s so tiny that you have to get really close to decipher it at all…

Finally, after some soot stains around the exhausts and some vernier nozzels with graphite, the kit received a coat of matt acrylic varnish.

Building this vintage VF-1 kit took a while and a lot of effort, but I like the result: with the S-FAST Pack, the elegant VF-1 turned into a massive space fighter hulk! The normal Super Valkyries already look very compact and purposeful, but this here is truly menacing. Especially when standing on its own feet/landing gear, with its nose-down stance and the small, original wheels, this thing reminds of a Space Shuttle that had just landed.

Good that I recently built a simple VF-1 fighter as a warm-up session. ARII’s kit #70 is not a pleasant build, rather a fight with the elements and coupled with a lot of compromises – if you want a Super Valkyrie Fighter in 1:100, the much more modern WAVE kit is IMHO the better option (and actually not much more pricey than this vintage collector’s item). But for the vintage feeling, this exotic model kit was just the right ticket, and it turned, despite many weaknesses and rather corny details, into an impressive fighter. Esp. the lunar camouflage scheme looks odd, but very unique and purposeful.

Anyway, with so many inherent flaws of the ARII kit, my former method of converting a pure (and much more common) Gerwalk kit into a space-capable VF-1 fighter is not less challenging and complicated than trying to fix this OOB option into a decent model. :-/

View On Black

This afternoon I found this beatiful car, parked a few feet from my house.

This is actually the first 997 Turbo I've seen that was parked so freely as this one.

That gave the opportunity to shoot some nice pictures of this underrated supercar.

The 997 Turbo debuted in February 2006 at the Geneva Motor Show. It has a new front bumper with turn signals which are LED lights in a horizontal bar through the air intake. The fog lights are moved to the corners of the bumpers. Large air intakes in front of and behind the rear wheels are other obvious visual cues. The retractable rear wing is also one of the highlights, a feature which has been available on the 996 Turbo as well.

2009 Porsche 997 Turbo in Carrara WhiteThe optional Sport Chrono package allows 911 Turbo to overboost for 10 seconds, increasing peak torque over a narrow rev range. According to official Porsche figures, it accelerates 100 km/h (62 mph) in 3.9 seconds with the manual transmission, and 3.7 seconds with Tiptronic S transmission. It has also recorded a 60 mph (97 km/h) time of 3.2 seconds at the hands of US motoring publication Motor Trend, eclipsing all of its major competitors and even Porsche's own Carrera GT supercar. The 997 Turbo has an official top speed of 318 km/h (198 mph) and Jeremy Clarkson getting up to an indicated speed of 322 km/h (200 mph) during his 2008 video special, Clarkson: Thriller.

wikipedia

Some background:

The VF-1 was developed by Stonewell/Bellcom/Shinnakasu for the U.N. Spacy by using alien Overtechnology obtained from the SDF-1 Macross alien spaceship. Its production was preceded by an aerodynamic proving version of its airframe, the VF-X. Unlike all later VF vehicles, the VF-X was strictly a jet aircraft, built to demonstrate that a jet fighter with the features necessary to convert to Battroid mode was aerodynamically feasible. After the VF-X's testing was finished, an advanced concept atmospheric-only prototype, the VF-0 Phoenix, was flight-tested from 2005 to 2007 and briefly served as an active-duty fighter from 2007 to the VF-1's rollout in late 2008, while the bugs were being worked out of the fully functional VF-1 prototype (the VF-X-1).

Despite its relatively short and intense production run the fighter remained active in many second line units and continued to show its worthiness even years later, e. g. through Milia Jenius who would use her old VF-1 fighter in defense of the colonization fleet - 35 years after the type's service introduction!

General characteristics:

All-environment variable fighter and tactical combat Battroid,

used by U.N. Spacy, U.N. Navy, U.N. Space Air Force and U.N.S. Marine Corps

Accommodation:

Pilot only in Marty & Beck Mk-7 zero/zero ejection seat

Dimensions:

Fighter Mode:

Length 14.23 meters

Wingspan 14.78 meters (at 20° minimum sweep)

Height 3.84 meters

Battroid Mode:

Height 12.68 meters

Width 7.3 meters

Length 4.0 meters

Empty weight: 13.25 metric tons

Standard T-O mass: 18.5 metric tons

MTOW: 37.0 metric tons

Power Plant:

2x Shinnakasu Heavy Industry/P&W/Roice FF-2001 thermonuclear reaction turbine engines, output 650 MW each, rated at 11,500 kg in standard or 225.63 kN in overboost

4x Shinnakasu Heavy Industry NBS-1 high-thrust vernier thrusters (1 x counter reverse vernier thruster nozzle mounted on the side of each leg nacelle/air intake, 1 x wing thruster roll control system on each wingtip)

18x P&W LHP04 low-thrust vernier thrusters beneath multipurpose hook/handles

Performance:

Battroid Mode: maximum walking speed 160 km/h

Fighter Mode: at 10,000 m Mach 2.71; at 30,000+ m Mach 3.87

g limit: in space +7

Thrust-to-weight ratio: empty 3.47; standard T-O 2.49; maximum T-O 1.24

Design Features:

3-mode variable transformation; variable geometry wing; vertical take-off and landing; control-configurable vehicle; single-axis thrust vectoring; three "magic hand" manipulators for maintenance use; retractable canopy shield for Battroid mode and atmospheric reentry; option of GBP-1S system, atmospheric-escape booster, or FAST Pack system

Transformation:

Standard time from Fighter to Battroid (automated): under 5 sec.

Min. time from Fighter to Battroid (manual): 0.9 sec.

Armament:

2x Mauler RÖV-20 anti-aircraft laser cannon, firing 6,000 ppm

1x Howard GU-11 55 mm three-barrel Gatling gun pod with 200 RPG, fired at 1,200 rpm

4x underwing hard points for a wide variety of ordnance, including…

12x AMM-1 hybrid guided multipurpose missiles (3/point), or

12x MK-82 LDGB conventional bombs (3/point), or

6x RMS-1 large anti-ship reaction missiles (2/outboard point, 1/inboard point), or

4x UUM-7 micro-missile pods (1/point) each carrying 15 x Bifors HMM-01 micro-missiles,

or a combination of above load-outs

The kit and its assembly:

Another small and vintage 1:100 VF-1 Fighter. This time it’s a non-canonical aircraft, based on a limited edition decal sheet that was published with the Japanese Model Graphix magazine in April 2001 (check this here for reference: www.starshipmodeler.com/mecha/jl_clrvalk.htm) with Hasegawa’s first release of their 1:72 Valkyrie Fighter kit. The give-away sheet featured several VF-1s, including an anniversary paint scheme for the 2.500th production Valkyrie. This is AFAIK neither ‘official’ nor canonical – but the pretty blue-and-white livery caught my attention, and I had for a long time the plan to re-create this livery on one of my favored 1:100 models. This would not work 100%, though, so I had to improvise – see below.

The kit was built OOB, with the landing gear down and (after taking the flight scenic pictures) with an open canopy, mounted on a small lift arm. Some typical small blade antennae the 1:100 simple kit lacks were added around the hull as a standard measure to improve the look. In the cockpit I added side consoles and a pilot figure for the in-flight shots.

The only non-standard additions are the IRST sensor fairing in front of the cockpit – the model of the anniversary VF-1 in the Model Graphix magazine carries this canonical upgrade, too, it was created from clear sprue material. Another tiny addition were the RHAWS antenna fairings at the top of the fins, scratched from small styrene profile bits.

The Valkyrie’s ordnance is standard and was taken OOB, featuring twelve AMM-1 missiles under the wings plus the standard GU-11 gatling gun pod; the latter was modified to hold a scratched wire display for in-flight pictures at its rear end. The Model Graphix VF-1 is insofar confusing as it seems to carry something that looks like a white ACMI pod on a non-standard pylon, rather attached to the legs than to the wings? That's odd and I could not make up a useful function, so I rejected this detail. The magazine Valkyrie's belly drop tank was - even though canonical, AFAIK - also not taken over to my later in-service status.

Painting and markings:

The more challenging part of the build, in two ways. First, re-creating the original commemorative livery would have called for home-made decals printed in opaque white for the manufacturers’ logos, something I was not able to do at home. So, I had to interpret the livery in a different way and decided to spin the aircraft’s story further: what would become of this VF-1 after its roll-out and PR event? In a war situation it would certainly be delivered quickly to a frontline unit, and since I had some proper markings left over, I decided to attach this colorful bird to the famous Skull Squadron, SVF-1, yet to a less glorious Flight. Since flight leaders and aces in the Macross universe would frequently fly VF-1s in individual non-standard liveries, sometimes even very bright ones, the 2,500th VF-1 could have well retained its catchy paint scheme.

The second part of the challenge: the actual paint job. Again, no suitable decals were at hand, so I had to re-create everything from scratch. The VF-1J kit I used thankfully came molded in white styrene, so that the front half of the aircraft could be easily painted in white, with no darker/colored plastic shining through. I painted the white (Revell 301, a very pure white) with a brush first. For the blue rear half, I settled upon an intense and deep cobalt blue tone (ModelMaster 2012). For the zigzag border between the colors, I used Tamiya masking tape, trimmed with a tailor’s zigzag scissors and applied in a slightly overlapping pattern for an irregular edge.

The landing gear became standard all-white (Revell 301, too), with bright red edges (Humbrol 174) on the covers. Antenna fairings were painted with radome tan (Humbrol 7) as small color highlights.

The cockpit interior became standard medium grey (Revell 47) with a black ejection seat with brown cushions (Humbrol 119 and Revell 84), and brown “black boxes” behind the headrest. The air intakes as well as the interior of the VG wings were painted dark grey (Revell 77). The jet nozzles/feet were internally painted with Humbrol 27003 (Steel Metallizer) and with Revell 91 on the outside, and they were later thoroughly treated with graphite to give them a burnt/worn look.

The GU-11 pod became standard bare metal (Revell 91, Iron metallic), the AMM-1s were painted in light grey (Humbrol 127) with many additional painted details in five additional colors, quite a tedious task when repeated twelve times...

After basic painting was one the model received a careful overall washing with black ink to emphasize the engraved panel lines, and light post-shading was done to the blue areas to emphasize single panels.

The full-color ’kite’ roundels came from an 1:100 VF-1A sheet, the skull emblems were left over from my Kotobukiya 1:72 VF-4 build some years ago, which OOB carries SVF-1 markings, too. The 2.500th aircraft nose art decoration was printed on clear decal film with an ink jet printer at home, even though it’s so small that no details can be discerned on the model. SVF-1’s “ML” tail code was created with single white decal letters (RAF WWII font), the red “555” modex came from an PrintScale A-26 Invader sheet, it's part of a USAF serial number from an all-black Korean War era aircraft.

The wings' leading edges were finished in medium grey, done with decal sheet material. The Model Graphix Valkyrie does not sport this detail, but I think that the VF-1 looks better with them and more realistic. Red warning stripes around the legs - also not seen on the model in the magazine - were made from similar material.

The confetti along the jagged edge between the white and the blue areas was created with decal material, too – every bit was cut out and put into place one for one… To match the cobalt blue tone, the respective enamel paint was applied on clear decal sheet material and cut into small bits. For the white and red confetti, generic decal sheet material was used. All in all, this was another tedious process, but, at the small 1:100 scale, masks or tape would have been much more complex and less successful with the brushes I use for painting. For this home-made approach the result looks quite good!

Finally, after some typical details and position lights had been added with clear paints over a silver base, the small VF-1 was sealed with a coat of semi-matt acrylic varnish, giving it a slightly shiny finish.

A pretty VF-1 – even though I’d call it purely fictional, despite being based on material that was published in a Japanese magazine more than 20 years ago. The simple yet striking livery was a bit tricky to create, but the result, with the additional SVF-1 unit markings, looks good and makes me wonder how this machine would look with FAST pack elements for use in space or as a transformed Battroid?

Some background:

The VF-1 was developed by Stonewell/Bellcom/Shinnakasu for the U.N. Spacy by using alien Overtechnology obtained from the SDF-1 Macross alien spaceship. Its production was preceded by an aerodynamic proving version of its airframe, the VF-X. Unlike all later VF vehicles, the VF-X was strictly a jet aircraft, built to demonstrate that a jet fighter with the features necessary to convert to Battroid mode was aerodynamically feasible. After the VF-X's testing was finished, an advanced concept atmospheric-only prototype, the VF-0 Phoenix, was flight-tested from 2005 to 2007 and briefly served as an active-duty fighter from 2007 to the VF-1's rollout in late 2008, while the bugs were being worked out of the fully functional VF-1 prototype (the VF-X-1).

Despite its relatively short and intense production run the fighter remained active in many second line units and continued to show its worthiness even years later, e. g. through Milia Jenius who would use her old VF-1 fighter in defense of the colonization fleet - 35 years after the type's service introduction!

General characteristics:

All-environment variable fighter and tactical combat Battroid,

used by U.N. Spacy, U.N. Navy, U.N. Space Air Force and U.N.S. Marine Corps

Accommodation:

Pilot only in Marty & Beck Mk-7 zero/zero ejection seat

Dimensions:

Fighter Mode:

Length 14.23 meters

Wingspan 14.78 meters (at 20° minimum sweep)

Height 3.84 meters

Battroid Mode:

Height 12.68 meters

Width 7.3 meters

Length 4.0 meters

Empty weight: 13.25 metric tons

Standard T-O mass: 18.5 metric tons

MTOW: 37.0 metric tons

Power Plant:

2x Shinnakasu Heavy Industry/P&W/Roice FF-2001 thermonuclear reaction turbine engines, output 650 MW each, rated at 11,500 kg in standard or 225.63 kN in overboost

4x Shinnakasu Heavy Industry NBS-1 high-thrust vernier thrusters (1 x counter reverse vernier thruster nozzle mounted on the side of each leg nacelle/air intake, 1 x wing thruster roll control system on each wingtip)

18x P&W LHP04 low-thrust vernier thrusters beneath multipurpose hook/handles

Performance:

Battroid Mode: maximum walking speed 160 km/h

Fighter Mode: at 10,000 m Mach 2.71; at 30,000+ m Mach 3.87

g limit: in space +7

Thrust-to-weight ratio: empty 3.47; standard T-O 2.49; maximum T-O 1.24

Design Features:

3-mode variable transformation; variable geometry wing; vertical take-off and landing; control-configurable vehicle; single-axis thrust vectoring; three "magic hand" manipulators for maintenance use; retractable canopy shield for Battroid mode and atmospheric reentry; option of GBP-1S system, atmospheric-escape booster, or FAST Pack system

Transformation:

Standard time from Fighter to Battroid (automated): under 5 sec.

Min. time from Fighter to Battroid (manual): 0.9 sec.

Armament:

2x Mauler RÖV-20 anti-aircraft laser cannon, firing 6,000 ppm

1x Howard GU-11 55 mm three-barrel Gatling gun pod with 200 RPG, fired at 1,200 rpm

4x underwing hard points for a wide variety of ordnance, including…

12x AMM-1 hybrid guided multipurpose missiles (3/point), or

12x MK-82 LDGB conventional bombs (3/point), or

6x RMS-1 large anti-ship reaction missiles (2/outboard point, 1/inboard point), or

4x UUM-7 micro-missile pods (1/point) each carrying 15 x Bifors HMM-01 micro-missiles,

or a combination of above load-outs

The kit and its assembly:

Another small and vintage 1:100 VF-1 Fighter. This time it’s a non-canonical aircraft, based on a limited edition decal sheet that was published with the Japanese Model Graphix magazine in April 2001 (check this here for reference: www.starshipmodeler.com/mecha/jl_clrvalk.htm) with Hasegawa’s first release of their 1:72 Valkyrie Fighter kit. The give-away sheet featured several VF-1s, including an anniversary paint scheme for the 2.500th production Valkyrie. This is AFAIK neither ‘official’ nor canonical – but the pretty blue-and-white livery caught my attention, and I had for a long time the plan to re-create this livery on one of my favored 1:100 models. This would not work 100%, though, so I had to improvise – see below.

The kit was built OOB, with the landing gear down and (after taking the flight scenic pictures) with an open canopy, mounted on a small lift arm. Some typical small blade antennae the 1:100 simple kit lacks were added around the hull as a standard measure to improve the look. In the cockpit I added side consoles and a pilot figure for the in-flight shots.

The only non-standard additions are the IRST sensor fairing in front of the cockpit – the model of the anniversary VF-1 in the Model Graphix magazine carries this canonical upgrade, too, it was created from clear sprue material. Another tiny addition were the RHAWS antenna fairings at the top of the fins, scratched from small styrene profile bits.

The Valkyrie’s ordnance is standard and was taken OOB, featuring twelve AMM-1 missiles under the wings plus the standard GU-11 gatling gun pod; the latter was modified to hold a scratched wire display for in-flight pictures at its rear end. The Model Graphix VF-1 is insofar confusing as it seems to carry something that looks like a white ACMI pod on a non-standard pylon, rather attached to the legs than to the wings? That's odd and I could not make up a useful function, so I rejected this detail. The magazine Valkyrie's belly drop tank was - even though canonical, AFAIK - also not taken over to my later in-service status.

Painting and markings:

The more challenging part of the build, in two ways. First, re-creating the original commemorative livery would have called for home-made decals printed in opaque white for the manufacturers’ logos, something I was not able to do at home. So, I had to interpret the livery in a different way and decided to spin the aircraft’s story further: what would become of this VF-1 after its roll-out and PR event? In a war situation it would certainly be delivered quickly to a frontline unit, and since I had some proper markings left over, I decided to attach this colorful bird to the famous Skull Squadron, SVF-1, yet to a less glorious Flight. Since flight leaders and aces in the Macross universe would frequently fly VF-1s in individual non-standard liveries, sometimes even very bright ones, the 2,500th VF-1 could have well retained its catchy paint scheme.

The second part of the challenge: the actual paint job. Again, no suitable decals were at hand, so I had to re-create everything from scratch. The VF-1J kit I used thankfully came molded in white styrene, so that the front half of the aircraft could be easily painted in white, with no darker/colored plastic shining through. I painted the white (Revell 301, a very pure white) with a brush first. For the blue rear half, I settled upon an intense and deep cobalt blue tone (ModelMaster 2012). For the zigzag border between the colors, I used Tamiya masking tape, trimmed with a tailor’s zigzag scissors and applied in a slightly overlapping pattern for an irregular edge.

The landing gear became standard all-white (Revell 301, too), with bright red edges (Humbrol 174) on the covers. Antenna fairings were painted with radome tan (Humbrol 7) as small color highlights.

The cockpit interior became standard medium grey (Revell 47) with a black ejection seat with brown cushions (Humbrol 119 and Revell 84), and brown “black boxes” behind the headrest. The air intakes as well as the interior of the VG wings were painted dark grey (Revell 77). The jet nozzles/feet were internally painted with Humbrol 27003 (Steel Metallizer) and with Revell 91 on the outside, and they were later thoroughly treated with graphite to give them a burnt/worn look.

The GU-11 pod became standard bare metal (Revell 91, Iron metallic), the AMM-1s were painted in light grey (Humbrol 127) with many additional painted details in five additional colors, quite a tedious task when repeated twelve times...

After basic painting was one the model received a careful overall washing with black ink to emphasize the engraved panel lines, and light post-shading was done to the blue areas to emphasize single panels.

The full-color ’kite’ roundels came from an 1:100 VF-1A sheet, the skull emblems were left over from my Kotobukiya 1:72 VF-4 build some years ago, which OOB carries SVF-1 markings, too. The 2.500th aircraft nose art decoration was printed on clear decal film with an ink jet printer at home, even though it’s so small that no details can be discerned on the model. SVF-1’s “ML” tail code was created with single white decal letters (RAF WWII font), the red “555” modex came from an PrintScale A-26 Invader sheet, it's part of a USAF serial number from an all-black Korean War era aircraft.

The wings' leading edges were finished in medium grey, done with decal sheet material. The Model Graphix Valkyrie does not sport this detail, but I think that the VF-1 looks better with them and more realistic. Red warning stripes around the legs - also not seen on the model in the magazine - were made from similar material.

The confetti along the jagged edge between the white and the blue areas was created with decal material, too – every bit was cut out and put into place one for one… To match the cobalt blue tone, the respective enamel paint was applied on clear decal sheet material and cut into small bits. For the white and red confetti, generic decal sheet material was used. All in all, this was another tedious process, but, at the small 1:100 scale, masks or tape would have been much more complex and less successful with the brushes I use for painting. For this home-made approach the result looks quite good!

Finally, after some typical details and position lights had been added with clear paints over a silver base, the small VF-1 was sealed with a coat of semi-matt acrylic varnish, giving it a slightly shiny finish.

A pretty VF-1 – even though I’d call it purely fictional, despite being based on material that was published in a Japanese magazine more than 20 years ago. The simple yet striking livery was a bit tricky to create, but the result, with the additional SVF-1 unit markings, looks good and makes me wonder how this machine would look with FAST pack elements for use in space or as a transformed Battroid?

Some background:

The VF-1 was developed by Stonewell/Bellcom/Shinnakasu for the U.N. Spacy by using alien Overtechnology obtained from the SDF-1 Macross alien spaceship. Its production was preceded by an aerodynamic proving version of its airframe, the VF-X. Unlike all later VF vehicles, the VF-X (sometimes referred to as VF-X1) was strictly a conventional/non-transformable jet aircraft, even though it incorporated many structural components and several key technologies that were vital for the transformable VF-1’s successful development that ran in parallel. Therefore, the VF-X was never intended as an air superiority fighter, but rather a flight-capable analogue test bed and proof of concept for the VF-1’s basic layout and major components. In this role, however, the VF-X made vital contributions to systems’ development that were later incorporated into the VF-1’s serial production and sped the program up considerably.

The fighter remained active in many second line units and continued to show its worthiness years later, e. g. through Milia Jenius who would use her old VF-1 fighter in defense of the colonization fleet - 35 years after the type's service introduction.

General characteristics:

Accommodation: One pilot in a Marty & Beck Mk-7 zero/zero ejection seat

Length 14.23 meters

Wingspan 14.78 meters (at 20° minimum sweep)

Height 3.84 meters

Empty weight: 13.25 metric tons

Standard T-O mass: 18.5 metric tons

Power Plant:

2x Shinnakasu Heavy Industry/P&W/Roice FF-2001 thermonuclear reaction turbine engines, output 650 MW each, rated at 11,500 kg in standard or in overboost (225.63 kN x 2)

4 x Shinnakasu Heavy Industry NBS-1 high-thrust vernier thrusters (1 x counter reverse vernier thruster nozzle mounted on the side of each leg nacelle/air intake, 1 x wing thruster roll control system on each wingtip);

Performance:

Top speed: Mach 2.71 at 10,000 m; Mach 3.87 at 30,000+ m

Thrust-to-weight ratio: empty 3.47; standard T-O 2.49; maximum T-O 1.24

Armament:

None installed, but the VF-X had 4x underwing hard points for a wide variety of ordnance, plus a ventral hardpoint for a Howard GU-11 55 mm three-barrel Gatling gun pod with 200 RPG, fired at 1,200 rds/min or other stores like test instruments

The model and its assembly:

Another submission to the “Prototypes” group build at whatifmodelers.com in July 2020. Being a VF-1 fan (and have built maybe twenty o these simple Arii kits), adding a VF-X was, more or less, a must – even more so because I had a suitable Valkyrie Fighter kit at hand for the conversion. As a side note, I have actually built something quite similar from a VF-1D many years ago: a fictional, non-transformable advanced trainer, without knowing about the VF-X at all.

Thanks to the “Macross - Perfect Memory” source book, the differences between the transformable VF-1 and its early testbed were easy to identify:

- Fixed legs with faired ducts from the intakes on (thighs)

- Ankle recesses disappeared

- Less and slightly different panel lines on the back and on the nose

- ventral head unit deleted and a respective fairing installed instead

- Levelled underside (shoulder fairings of the folded arms were cut down)

- Leg attachment points on the nose deleted

- No small, circular vernier thrusters all around the hull

- Some new/different venting grills (created mostly with 0.5mm black decal stripes)

Beyond the changes, the VF-1A was basically built OOB. Thankfully, the VF-X already features the later VF-1’s vectored thrust nozzles/feet, so that no changes had to be made in this respect. A pilot figure was added to the cockpit for the beauty pics, and after the flight scenes had been shot, the canopy remained open on a swing arm for static display. For the same reason, the model was built with the landing gear extended.

As a test aircraft, the underwing pylons and their AMM-1 ordnance were left away and the attachment points hidden with putty. I also omitted the ventral gun pod and left the aircraft clean. However, for the flight scene pictures, I implanted an adapter for a display holder made from wire.

In order to emphasize the test vehicle character of the VF-X, I gave the model a scratched spin recovery parachute installation between the fins, using a real world F-22 testbed as benchmark. It consists of styrene profiles, quite a delicate construction. For the same reason I gave the VF-X a long sensor boom on the nose, which changes the Valkyrie’s look, too. Finally, some small blade antennae were added to the nose and to the spine behind the cockpit.

Painting and markings:

To be honest, I have no idea if there was only a single VF-X prototype in the Macross universe, or more. Just one appears in the TV series in episode #33, and lack of suitable information and my personal lack of Japanese language proficiency prevents any deeper research. However, this would not keep me from inventing a personal interpretation of the canonical VF-X, especially because I do not really like the original livery from the TV series: an overall light grey with some simple black trim and “TEST” written on the (fixed) legs. Yamato did an 1:60 scale toy of the VF-X, but it was/is just a VF-1 with a ventral fairing; they added some shading to the basic grey – but this does not make the aircraft more attractive, IMHO.

When I looked at the original conceptual drawing of the VF-X in the “Macross - Perfect Memory” source book, however, I was immediately reminded of the F-15 prototypes from the Seventies (and this program used a total of twelve machines!). These featured originally a light grey (FS 36375?) overall base, to which bright dayglo orange markings on wings, fins and fuselage were soon added – in a very similar pattern to the VF-X. I think the VF-X livery was actually inspired by this, the time frame matches well with the production of the Macross TV series, too, and that’s what I adapted for my model.

In order to come close to the F-15 prototype livery, I gave “my” VF-X an overall basic coat of RAL 7047 “Telegrau 4”, one of German Telekom’s corporate colors and a very pale grey that can easily be mistaken for white when you do not have a contrast reference.

The cockpit received a medium grey finish, the ejection seat became black with brown cushions; the pilot figure is a 1:100 seated passenger from an architecture supplies, painted like an early VF-1 pilot in a white/blue suit. The jet nozzles/feet were painted with Revell 91 (Iron) and later treated with grinded graphite for a more metallic finish. The landing gear became classic white (I used Revell 301, which is a very pure tone, as contrast to the RAL 7047 on the hull), the air intake ducts and the internal sections of the VG wings were painted with dark grey (Revell 77).

For some diversity I took inspiration from the Yamato VF-X toy and added slightly darker (Humbrol 166, RAF Light Aircraft Grey) areas to the hull and the legs. Next, the panel lines were emphasized through a thinned black ink wash, but I did no panel post shading so that the VF-X would not look too dirty or worn.

Onto this basis I applied the orange dayglo markings. On the wings and fins, these were painted – they were applied with spray paint from a rattle can, involving lots of masking. The leading edges on wings and fins were created with grey decal sheet material, too. At this stage, some surface details and more fake panel lines were added with a soft pencil.

The orange cheatline under the cockpit is a personal addition; I found that some more orange had to be added to the nose for visual balance, and I eventually went for the simple, trimmed stripe (TL Modellbau material) instead of trying to apply decal sheet material around the jagged air intakes (F-15 prototype style). The black “TEST”, “VFX” and “U.N. Spacy” markings were designed at the computer and printed on clear inkjet decal paper. Even though the “real” VF-X does not feature the UNS “kite” insignia, I decided to add them to the model. These come from the OOB sheet, which also provided most (slightly yellowed) stencils.

Finally, the model was sealed with a coat of matt acrylic varnish (Italeri).

A rather different VF-1 project (and it is – to my astonishment – #28 in my 1:100 VF-1 Fighter mode collection!!!), with more changes to the basic model kit than one might expect at first sight. VF-X and VF-1 differ considerably from each other, despite identical outlines! However, I like the outcome, and I think that going a different route from the canonical grey/black livery paid out, the bright orange markings really make this VF-X stand out, and it looks IMHO more like a testbed than the “real” aircraft from the TV series.

Some background:

The VF-1 was developed by Stonewell/Bellcom/Shinnakasu for the U.N. Spacy by using alien Overtechnology obtained from the SDF-1 Macross alien spaceship. Its production was preceded by an aerodynamic proving version of its airframe, the VF-X. Unlike all later VF vehicles, the VF-X was strictly a jet aircraft, built to demonstrate that a jet fighter with the features necessary to convert to Battroid mode was aerodynamically feasible. After the VF-X's testing was finished, an advanced concept atmospheric-only prototype, the VF-0 Phoenix, was flight-tested from 2005 to 2007 and briefly served as an active-duty fighter from 2007 to the VF-1's rollout in late 2008, while the bugs were being worked out of the full-up VF-1 prototype (VF-X-1).

This particular fighter sported the squadron’s typical striped high visibility markings over a standard gloss light gray base on wings and legs, but unlike normal machines of this unit, with deep yellow and black markings, was, together with two sister ships, assigned to the unit’s staff flight. Each of these VF-1’s carried the unit markings and additional flight leader decoration on the noses in non-regular colors: turquoise on “001”, violet on “002” and pink on “003” – giving them one of the most distinctive and attractive paint schemes during the Space War.

General characteristics:

All-environment variable fighter and tactical combat Battroid,

used by U.N. Spacy, U.N. Navy, U.N. Space Air Force

Accommodation:

Pilot only in Marty & Beck Mk-7 zero/zero ejection seat

Dimensions:

Fighter Mode:

Length 14.23 meters

Wingspan 14.78 meters (at 20° minimum sweep)

Height 3.84 meters

Battroid Mode:

Height 12.68 meters

Width 7.3 meters

Length 4.0 meters

Empty weight: 13.25 metric tons;

Standard T-O mass: 18.5 metric tons;

MTOW: 37.0 metric tons

Power Plant:

2x Shinnakasu Heavy Industry/P&W/Roice FF-2001 thermonuclear reaction turbine engines, output 650 MW each, rated at 11,500 kg in standard or in overboost (225.63 kN x 2)

4x Shinnakasu Heavy Industry NBS-1 high-thrust vernier thrusters (1 x counter reverse vernier thruster nozzle mounted on the side of each leg nacelle/air intake, 1 x wing thruster roll control system on each wingtip);

18x P&W LHP04 low-thrust vernier thrusters beneath multipurpose hook/handles

Performance:

Battroid Mode: maximum walking speed 160 km/h

Fighter Mode: at 10,000 m Mach 2.71; at 30,000+ m Mach 3.87

g limit: in space +7

Thrust-to-weight ratio: empty 3.47; standard T-O 2.49; maximum T-O 1.24

Design Features:

3-mode variable transformation; variable geometry wing; vertical take-off and landing; control-configurable vehicle; single-axis thrust vectoring; three "magic hand" manipulators for maintenance use; retractable canopy shield for Battroid mode and atmospheric reentry; option of GBP-1S system, atmospheric-escape booster, or FAST Pack system

Transformation:

Standard time from Fighter to Battroid (automated): under 5 sec.

Min. time from Fighter to Battroid (manual): 0.9 sec.

Armament:

1x internal Mauler RÖV-20 anti-aircraft laser cannon, firing 6,000 pulses per minute

1x Howard GU-11 55 mm three-barrel Gatling gun pod with 200 RPG, fired at 1,200 rds/min

4x underwing hard points for a wide variety of ordnance, including

12x AMM-1 hybrid guided multipurpose missiles (3/point), or

12x MK-82 LDGB conventional bombs (3/point), or

6x RMS-1 large anti-spaceship reaction missiles (2/outboard point, 1/inboard point), or

4x UUM-7 micro-missile pods (1/point) each carrying 15 x Bifors HMM-01 micro-missiles, or a combination of above load-outs and other guided and unguided ordnance

The kit and its assembly:

It has been a while that I tackled one of these vintage ARII kits, and this time the build became a relief project from Corona cabin fever and a major conversion project. This garish Valkyrie is fictional but was heavily based on a profile drawing published in the Macross source book “Variable Fighter Master File VF-1 Valkyrie” of SVF-51 (originally with deep yellow accents)

The kit is a VF-1J, but the head unit was replaced with an “A” variant from the spares box. It was basically built OOB, with the landing gear down. The only mods are some standard blade antennae, an IRST fairing under the nose and the fins’ tops were slightly modified, too. The pylons were modified to take the new ordnance – optically guided glide bombs à la AGM-62 “Walleye”, scratched from obscure AAMs from a Kangnam MiG-29 and painted in the style of early USAF GBUs.

The gun pod was also modified to accept a scratched wire display in its tail and holds the Valkyrie in flight. The pilot figure was just a guest for the in-flight photo sessions, later the canopy was glued to a mount in open position.

Painting and markings:

I had wanted to apply this spectacular scheme onto a model for a while, but could not get myself to use yellow, because I already have a similar VF-1 in USN high-viz livery and with yellow and black decorations. I considered other tones, and eventually settled for pink – as an unusual choice, but there are canonical VF-1s with such an exotic tone in their liveries.

The rest was straightforwardly adapted from the profile, even though the creation of the trim lines without masking was a challenge. I used various stripes of generic decal material in black and white to create shapes and demarcation lines, filling up larger areas with paint. The overall basic tone is Humbrol 40 (glossy FS 36440), plus Humbrol 200 (Pink), 22 (Gloss Black) and Revell 301 (Semi-matt White) for the flaps’ upper surfaces and the landing gear. The cockpit became medium grey with a black seat and brown cushions. The ventral gun pod became aluminum.

After basic painting, the model received an overall washing with thinned black ink to emphasize the engraved panel lines. A little post-shading was done, too, for a more graphic look, and then the decals (including most trim lines, e. g. in black on the wings and the nose, in white on the fins) were applied. The following basic markings came from various 1:100 VF-1 sheets, the tail code letters came from an RAF SEAC Spitfire from WWII. The modex codes consist of single digit decals (2mm size, TL Modellbau).

Finally, after some detail painting and highlights with clear paint had been added, the VF-1 was sealed with a semi-gloss acrylic varnish.

A small and quick interim project, realized in just a few days – most time passed while waiting for the gloss Humbrol enamels to cure properly… There are certainly better VF-1 models than the vintage ARII kits, but I just love them because they are small, simple and easy to modify. Staying close to the benchmark profile was quite a challenge but worked out fine, even though I had hoped that the pink would stand out a little more. But the plan to change the unit’s ID color for a staff flight aircraft turned out well, even though some compromises had to be made.

In 1987, the Esprit was restyled by British designer Peter Stevens. Stevens, who would later go on to design the McLaren F1, produced a less angular, more rounded Esprit. Giugiaro is said to have liked the new shape, claiming it was perhaps too close to his original design. The exterior changes were accompanied by a redesign of the interior that gave more space to the occupants. The revised Esprit was not given a new "Series" number but is often called by its project code of X180.

Panels for the body were produced using a new process called VARI (Vacuum Assisted Resin Injection). This method, which was patented by Lotus, offered advantages over the previous hand lay-up process. Kevlar reinforcement was added to the roof and sides for roll-over protection.

The X180 cars inherited most of their mechanical components from the earlier HC Esprit and Turbo Esprit, although the name for the forced induction model was now Esprit Turbo. 1988 model year North American Esprit Turbo models kept the Citroën transaxle and Bosch fuel injection system used in the previous model year. Other X180 cars received a new Renault UN-1 transaxle, which necessitated a move to outboard rear brakes.

Power output of the Type 910 turbocharged engine was unchanged, but 0-60 mph acceleration times dropped from 5.6 seconds to between 5.4 and 5.1 seconds. Top speed was over 150 mph (240 km/h).

In 1989, the K-Jetronic system was replaced with a Lotus/Delco multi-point fuel injection (MPFI) system. The engine also received an air-water-air intercooler called a Chargecooler by Lotus. This revised engine was known as the Type 910S. Power output was up to 197 kW (268 PS; 264 hp) with 209 kW (284 PS; 280 hp) available on overboost. 0-60 mph acceleration times dropped to 4.7 seconds and top speed was over 160 mph (257 km/h). The 910S engine went into the new Special Equipment (SE) model, which also received changes to the body, with side skirts parallel to the body, five air ducts in the front air dam, wing mirrors from the Citroën CX and the addition of a rear wing.

[Text from Wikipedia]

Some background:

The VF-1 was developed by Stonewell/Bellcom/Shinnakasu for the U.N. Spacy by using alien Overtechnology obtained from the SDF-1 Macross alien spaceship. Its production was preceded by an aerodynamic proving version of its airframe, the VF-X. Unlike all later VF vehicles, the VF-X (sometimes referred to as VF-X1) was strictly a conventional/non-transformable jet aircraft, even though it incorporated many structural components and several key technologies that were vital for the transformable VF-1’s successful development that ran in parallel. Therefore, the VF-X was never intended as an air superiority fighter, but rather a flight-capable analogue test bed and proof of concept for the VF-1’s basic layout and major components. In this role, however, the VF-X made vital contributions to systems’ development that were later incorporated into the VF-1’s serial production and sped the program up considerably.

The fighter remained active in many second line units and continued to show its worthiness years later, e. g. through Milia Jenius who would use her old VF-1 fighter in defense of the colonization fleet - 35 years after the type's service introduction.

General characteristics:

Accommodation: One pilot in a Marty & Beck Mk-7 zero/zero ejection seat

Length 14.23 meters

Wingspan 14.78 meters (at 20° minimum sweep)

Height 3.84 meters

Empty weight: 13.25 metric tons

Standard T-O mass: 18.5 metric tons

Power Plant:

2x Shinnakasu Heavy Industry/P&W/Roice FF-2001 thermonuclear reaction turbine engines, output 650 MW each, rated at 11,500 kg in standard or in overboost (225.63 kN x 2)

4 x Shinnakasu Heavy Industry NBS-1 high-thrust vernier thrusters (1 x counter reverse vernier thruster nozzle mounted on the side of each leg nacelle/air intake, 1 x wing thruster roll control system on each wingtip);

Performance:

Top speed: Mach 2.71 at 10,000 m; Mach 3.87 at 30,000+ m

Thrust-to-weight ratio: empty 3.47; standard T-O 2.49; maximum T-O 1.24

Armament:

None installed, but the VF-X had 4x underwing hard points for a wide variety of ordnance, plus a ventral hardpoint for a Howard GU-11 55 mm three-barrel Gatling gun pod with 200 RPG, fired at 1,200 rds/min or other stores like test instruments

The model and its assembly:

Another submission to the “Prototypes” group build at whatifmodelers.com in July 2020. Being a VF-1 fan (and have built maybe twenty o these simple Arii kits), adding a VF-X was, more or less, a must – even more so because I had a suitable Valkyrie Fighter kit at hand for the conversion. As a side note, I have actually built something quite similar from a VF-1D many years ago: a fictional, non-transformable advanced trainer, without knowing about the VF-X at all.

Thanks to the “Macross - Perfect Memory” source book, the differences between the transformable VF-1 and its early testbed were easy to identify:

- Fixed legs with faired ducts from the intakes on (thighs)

- Ankle recesses disappeared

- Less and slightly different panel lines on the back and on the nose

- ventral head unit deleted and a respective fairing installed instead

- Levelled underside (shoulder fairings of the folded arms were cut down)

- Leg attachment points on the nose deleted

- No small, circular vernier thrusters all around the hull

- Some new/different venting grills (created mostly with 0.5mm black decal stripes)

Beyond the changes, the VF-1A was basically built OOB. Thankfully, the VF-X already features the later VF-1’s vectored thrust nozzles/feet, so that no changes had to be made in this respect. A pilot figure was added to the cockpit for the beauty pics, and after the flight scenes had been shot, the canopy remained open on a swing arm for static display. For the same reason, the model was built with the landing gear extended.

As a test aircraft, the underwing pylons and their AMM-1 ordnance were left away and the attachment points hidden with putty. I also omitted the ventral gun pod and left the aircraft clean. However, for the flight scene pictures, I implanted an adapter for a display holder made from wire.

In order to emphasize the test vehicle character of the VF-X, I gave the model a scratched spin recovery parachute installation between the fins, using a real world F-22 testbed as benchmark. It consists of styrene profiles, quite a delicate construction. For the same reason I gave the VF-X a long sensor boom on the nose, which changes the Valkyrie’s look, too. Finally, some small blade antennae were added to the nose and to the spine behind the cockpit.

Painting and markings:

To be honest, I have no idea if there was only a single VF-X prototype in the Macross universe, or more. Just one appears in the TV series in episode #33, and lack of suitable information and my personal lack of Japanese language proficiency prevents any deeper research. However, this would not keep me from inventing a personal interpretation of the canonical VF-X, especially because I do not really like the original livery from the TV series: an overall light grey with some simple black trim and “TEST” written on the (fixed) legs. Yamato did an 1:60 scale toy of the VF-X, but it was/is just a VF-1 with a ventral fairing; they added some shading to the basic grey – but this does not make the aircraft more attractive, IMHO.

When I looked at the original conceptual drawing of the VF-X in the “Macross - Perfect Memory” source book, however, I was immediately reminded of the F-15 prototypes from the Seventies (and this program used a total of twelve machines!). These featured originally a light grey (FS 36375?) overall base, to which bright dayglo orange markings on wings, fins and fuselage were soon added – in a very similar pattern to the VF-X. I think the VF-X livery was actually inspired by this, the time frame matches well with the production of the Macross TV series, too, and that’s what I adapted for my model.

In order to come close to the F-15 prototype livery, I gave “my” VF-X an overall basic coat of RAL 7047 “Telegrau 4”, one of German Telekom’s corporate colors and a very pale grey that can easily be mistaken for white when you do not have a contrast reference.

The cockpit received a medium grey finish, the ejection seat became black with brown cushions; the pilot figure is a 1:100 seated passenger from an architecture supplies, painted like an early VF-1 pilot in a white/blue suit. The jet nozzles/feet were painted with Revell 91 (Iron) and later treated with grinded graphite for a more metallic finish. The landing gear became classic white (I used Revell 301, which is a very pure tone, as contrast to the RAL 7047 on the hull), the air intake ducts and the internal sections of the VG wings were painted with dark grey (Revell 77).

For some diversity I took inspiration from the Yamato VF-X toy and added slightly darker (Humbrol 166, RAF Light Aircraft Grey) areas to the hull and the legs. Next, the panel lines were emphasized through a thinned black ink wash, but I did no panel post shading so that the VF-X would not look too dirty or worn.

Onto this basis I applied the orange dayglo markings. On the wings and fins, these were painted – they were applied with spray paint from a rattle can, involving lots of masking. The leading edges on wings and fins were created with grey decal sheet material, too. At this stage, some surface details and more fake panel lines were added with a soft pencil.

The orange cheatline under the cockpit is a personal addition; I found that some more orange had to be added to the nose for visual balance, and I eventually went for the simple, trimmed stripe (TL Modellbau material) instead of trying to apply decal sheet material around the jagged air intakes (F-15 prototype style). The black “TEST”, “VFX” and “U.N. Spacy” markings were designed at the computer and printed on clear inkjet decal paper. Even though the “real” VF-X does not feature the UNS “kite” insignia, I decided to add them to the model. These come from the OOB sheet, which also provided most (slightly yellowed) stencils.

Finally, the model was sealed with a coat of matt acrylic varnish (Italeri).

A rather different VF-1 project (and it is – to my astonishment – #28 in my 1:100 VF-1 Fighter mode collection!!!), with more changes to the basic model kit than one might expect at first sight. VF-X and VF-1 differ considerably from each other, despite identical outlines! However, I like the outcome, and I think that going a different route from the canonical grey/black livery paid out, the bright orange markings really make this VF-X stand out, and it looks IMHO more like a testbed than the “real” aircraft from the TV series.

Some background:

The VF-1 was developed by Stonewell/Bellcom/Shinnakasu for the U.N. Spacy by using alien Overtechnology obtained from the SDF-1 Macross alien spaceship. Its production was preceded by an aerodynamic proving version of its airframe, the VF-X. Unlike all later VF vehicles, the VF-X was strictly a jet aircraft, built to demonstrate that a jet fighter with the features necessary to convert to Battroid mode was aerodynamically feasible. After the VF-X's testing was finished, an advanced concept atmospheric-only prototype, the VF-0 Phoenix, was flight-tested from 2005 to 2007 and briefly served as an active-duty fighter from 2007 to the VF-1's rollout in late 2008, while the bugs were being worked out of the full-up VF-1 prototype (VF-X-1).

However, the fighter remained active in many second line units and continued to show its worthiness years later, e. g. through Milia Jenius who would use her old VF-1 fighter in defense of the colonization fleet - 35 years after the type's service introduction!

General characteristics:

All-environment variable fighter and tactical combat Battroid,

used by U.N. Spacy, U.N. Navy, U.N. Space Air Force

Accommodation:

Pilot only in Marty & Beck Mk-7 zero/zero ejection seat

Dimensions:

Fighter Mode:

Length 14.23 meters

Wingspan 14.78 meters (at 20° minimum sweep)

Height 3.84 meters

Battroid Mode:

Height 12.68 meters

Width 7.3 meters

Length 4.0 meters

Empty weight: 13.25 metric tons;

Standard T-O mass: 18.5 metric tons;

MTOW: 37.0 metric tons

Power Plant:

2x Shinnakasu Heavy Industry/P&W/Roice FF-2001 thermonuclear reaction turbine engines, output 650 MW each, rated at 11,500 kg in standard or in overboost (225.63 kN x 2)

4x Shinnakasu Heavy Industry NBS-1 high-thrust vernier thrusters (1 x counter reverse vernier thruster nozzle mounted on the side of each leg nacelle/air intake, 1 x wing thruster roll control system on each wingtip);

18x P&W LHP04 low-thrust vernier thrusters beneath multipurpose hook/handles

Performance:

Battroid Mode: maximum walking speed 160 km/h

Fighter Mode: at 10,000 m Mach 2.71; at 30,000+ m Mach 3.87

g limit: in space +7

Thrust-to-weight ratio: empty 3.47; standard T-O 2.49; maximum T-O 1.24

Design Features:

3-mode variable transformation; variable geometry wing; vertical take-off and landing; control-configurable vehicle; single-axis thrust vectoring; three "magic hand" manipulators for maintenance use; retractable canopy shield for Battroid mode and atmospheric reentry; option of GBP-1S system, atmospheric-escape booster, or FAST Pack system

Transformation:

Standard time from Fighter to Battroid (automated): under 5 sec.

Min. time from Fighter to Battroid (manual): 0.9 sec.

Armament:

2x internal Mauler RÖV-20 anti-aircraft laser cannon, firing 6,000 pulses per minute

1x Howard GU-11 55 mm three-barrel Gatling gun pod with 200 RPG, fired at 1,200 rds/min

4x underwing hard points for a wide variety of ordnance, including

12x AMM-1 hybrid guided multipurpose missiles (3/point), or

12x MK-82 LDGB conventional bombs (3/point), or

6x RMS-1 large anti-ship reaction missiles (2/outboard point, 1/inboard point), or

4x UUM-7 micro-missile pods (1/point) each carrying 15 x Bifors HMM-01 micro-missiles,

or a combination of above load-outs

The kit and its assembly:

This fictional VF-1 is more or less “only” a camouflage experiment, spawned by a recent discussion about the German Luftwaffe’s so-called “Norm ‘81” paint scheme that was carried by the F-4Fs during the Eighties and the early Nineties. It is one of the most complex standardized paint scheme I am aware of, consisting of no less than six basic shades of grey and applied in two different patterns (early variant with angled/splinter camouflage, later this was changed into more organic shapes).

I have built a fictional post-GDR MiG-21 with the Norm ’81 scheme some years ago, but had always been curious how a Macross VF-1 would look with it, or how it could be adapted to the F-14esque airframe?

Concerning the model, it’s another vintage ARII VF-1, in this case a VF-1J, built OOB and with the landing gear down and an open canopy. However, I added some small details like the sensors in front of the cockpit, RHAWS sensors and bulges for ECM equipment on the lower legs (all canonical). The ordnance was subtly changed, with just two AMM-1 missiles on each outer pylon plus small ECM pods on the lo hardpoint (procured from an 1:144 Tornado). The inner stations were modified to hold quadruple starters for (fictional) air-to-ground missiles, left over from a Zvezda 1:72 Ka-58 helicopter and probably depicting Soviet/Russian 9M119 “Svir” laser-guided anti-tank missiles, or at least something similar. At the model’s 1:100 scale they are large enough to represent domestic alternatives to AGM-65 Maverick missiles – suitable against Zentraedi pods and other large ground targets. The ventral GU-11 pod was modified to hold a scratched wire display for in-flight pictures. Some blade antennae were added as a standard measure to improve the simple kit’s look. The cockpit was taken OOB, I just added a pilot figure for the scenic shots and the thick canopy was later mounted on a small lift arm in open position.

Painting and markings:

This was quite a challenge: adapting the Norm’ 81 scheme to the swing-wing Valkyrie, with its folded legs and the twin tail as well as lacking the Phantom’s spine and bulged air intakes, was not easy, and I went for the most straightforward solution and simplified things on the VF-1’s short spine.

The Norm ‘81’s “official” colors are all RAL tones, and I decided to use these for an authentic lokk, namely:

RAL 7009 Grüngrau: Revell 67 (acrylic)

RAL 7012 Basaltgrau: Revell 77 (acrylic)

RAL 7039 Quarzgrau: Xtracolor X259 (enamel)

RAL 7037 Staubgrau: Xtracolor X258 (enamel)

RAL 7030 Steingrau: Revell 75 (enamel)

RAL 7035 Lichtgrau: Humbrol 196 (enamel)

This basically plan worked and left me with a very murky aircraft: Norm ’81 turned out to be a kind of all-propose camouflage that works well against both sky and ground, at least in the typical German climate, and especially good at medium to low altitude. RAL 7030, 7037 and 7039 appear like gradually darker shades of the basically same brownish grey hue, framed with darker contrast areas that appear either greenish or bluish.

However, the Xtracolor enamels turned out to be total sh!t: they lacked pigments in the glossy and translucent base and therefore ANY opacity, esp. on any edge, at least when you use a brush like me. Not certain if using an airbrush improves this? The result were uneven and rather thick areas of paint, not what I had hoped for. And the Revell 75 just did what I hate about the company's enamels: drying up prematurely with a gooey consistency, leaving visible streaks.

After a black ink wash, very light post-shading was added. I should have from the start tried to stick to the acrylics and also mix the Xtracolor tones from Revell acrylics, a stunt that turned during the weathering process (trying to hide the many blemishes) out to be quite feasible. RAL 7037 was mixed from Revell 47 plus 89 in a ~1:1 ratio, and RAL 7039 from Revell 47, 77 and 87 with a touch of 09. Nevertheless, the paint finish turned out sub-optimal, but some shading and weathering saved most of the mess – even I am not satisfied with the outcome, the model looks more weathered than intended (even though most operational German F-4Fs with this paint scheme looked quite shaggy and worn, making the different shades of grey almost undiscernible).

After some consideration I gave this German VF-1 full-color (yet small) "Kite" roundels, together with a German tactical code. German flags and a vintage JaboG 32 squadron badge decorate the fin - a plausible move, because there are British Valkyries in source books that carry RAF fin flashes. Stencils and other markings came from VF-1 OOB sheets.

Finally, after some typical highlights with clear paint over a silver base were added, and the small VF-1 was sealed with a coat of matt acrylic varnish.

A spontaneous interim project, with interesting results. The adapted Norm ’81 scheme works well on the VF-1, and it even is a contemporary design from the era when the original TV series was conceived and aired. With the authentic tones I’d call it quite ugly – even though I was amazed during the photo session how well the different shades of grey (four from above!) blend into each other and break up the aircraft’s outlines. If there were no red-and-white roundels or the orange pilot in the cockpit (chosen intentionally for some color contrast), the camouflage would be very effective! Not perfect, but another special member in my growing VF-1 model fleet. ^^

Ford Fiesta (6th Gen) ST Turbo (2013-16) Engine 1596cc S4 Eco Boost Turbo

Registration Number R 111 XRJ (Cherished number first allocated to Manchester(

FORD UK SET

www.flickr.com/photos/45676495@N05/sets/72157623665118181...

The sixth generation Ford Fiesta was shown in concept form as the Ford Verve at the 2007 Frankfurt Motorshow and launched in August 2008 in the UK. This model is based on Ford's new global B-car platform.

The Fiesta ST was first revealed in concept form in 2011, based on the Fiesta Mk.VI with the car officially launched at the 2012 Geneva Motorshow. The ST is powered by a 1.6 litre Ford EcoBoost engine to deliver performance while still providing good fuel efficiency. The 1.6 litre Ford EcoBoost Turbocharged engine features Twin-independent Variable Camshaft Timing (Ti-VCT) with an output of 180bhp propelling the car to a maximum speed of 136mph and the 0-60mph dash in under 7 seconds, this engine features "overboost," allowing delivery of up to 197bhp for a maximum of 15 seconds.. The engine is mated to a 6 speed manual transmission which features Ford’s Torque Vectoring Control system to brake the inside front wheel to aid agility, and has three ESP modes. The ST features a redesigned front fascia similar to the one seen on the Focus ST, a large rear spoiler, aggressive rear diffuser with a dual exhaust system, completed with 17-inch wheels on Bridgestone Potenza tires. On the inside, the ST provides heavily bolstered Recaro front seats

The ST along with the rest of the Fiesta range was given a mid-term refresh for the 2014 model year featuring redesigned front and rear fascia. in June 2014, Ford claimed the largest market share in the UK of 12.87% – and almost half of those registrations belonged to the Fiesta.

Thankyou for a massive 54,769,844 views

Shot 03.07.2016 at Cars in the Park, Beacon Park, Lichfield REF 121-156

Porsche (99.21- 2st Phase) 911 Turbo (2015-19) Engine 3800cc Twin Turbo Flat 6 572bhp

Registration Number MK 02 ODO (Cherished number, originally allocated from Manchester)

PORSCHE SET

www.flickr.com/photos/45676495@N05/sets/72157623690528015...

The Porsche 991 is the internal designation for the seventh generation of the Porsche 91, designed by Michael Mauer and unveiled at the 2011. Frankfurt Motorshow. Compared to the 997, the 991 is slightly larger, with the wheelbase increased by 100 mm (3.9 ins, the overall length by 2.8 inches. Due to the use of high-strength steel, aluminium and some composites, the weight was reduced to 1,380 kg for the Carrera rising to 1,605 kg for the all wheel drive Turbo if equipped with the PDK transmission (Porsche Doppelkupplung).

The Turbo was introduced in late 2012 powered by a twin-turbocharged 3.8-litre flat-6 engine generating 520 PS (513 hp) The S version has an upgraded version of the engine generating a maximum power output of 560 PS (552hp) with overboost function. Both of the versions have all-wheel drive. The Turbo and Turbo S was available exclusively with 7-speed PDK.

The first phase 991 was superceeded by a Phase II version at the 2015 Frankfurt Motorshow The updated Porsche 911 (at Porsche internally referred to as 991.2 or 991 II) introduced new styling including updated front and rear bumpers, new dual exhaust pipes along with new head and tail lights and options.

The 991 Phase II was replaced by the 992 version of the Porsche 911 for the 2019 model year

Diolch am 76,232,217 o olygfeydd anhygoel, mae pob un yn cael ei werthfawrogi'n fawr.

Thanks for 76,232,217 amazing views, every one is greatly appreciated.

Shot 21.07.2019 at , Ashover Classic Car Show, Ashover, Derbyshire 143-557

Some background:

The VF-1 was developed by Stonewell/Bellcom/Shinnakasu for the U.N. Spacy by using alien Overtechnology obtained from the SDF-1 Macross alien spaceship. Its production was preceded by an aerodynamic proving version of its airframe, the VF-X. Unlike all later VF vehicles, the VF-X was strictly a jet aircraft, built to demonstrate that a jet fighter with the features necessary to convert to Battroid mode was aerodynamically feasible. After the VF-X's testing was finished, an advanced concept atmospheric-only prototype, the VF-0 Phoenix, was flight-tested from 2005 to 2007 and briefly served as an active-duty fighter from 2007 to the VF-1's rollout in late 2008, while the bugs were being worked out of the full-up VF-1 prototype (VF-X-1).

However, the fighter remained active in many second line units and continued to show its worthiness years later, e. g. through Milia Jenius who would use her old VF-1 fighter in defense of the colonization fleet - 35 years after the type's service introduction!

General characteristics:

All-environment variable fighter and tactical combat Battroid,

used by U.N. Spacy, U.N. Navy, U.N. Space Air Force

Accommodation:

Pilot only in Marty & Beck Mk-7 zero/zero ejection seat

Dimensions:

Fighter Mode:

Length 14.23 meters

Wingspan 14.78 meters (at 20° minimum sweep)

Height 3.84 meters

Battroid Mode:

Height 12.68 meters

Width 7.3 meters

Length 4.0 meters

Empty weight: 13.25 metric tons;

Standard T-O mass: 18.5 metric tons;

MTOW: 37.0 metric tons

Power Plant:

2x Shinnakasu Heavy Industry/P&W/Roice FF-2001 thermonuclear reaction turbine engines, output 650 MW each, rated at 11,500 kg in standard or in overboost (225.63 kN x 2)

4x Shinnakasu Heavy Industry NBS-1 high-thrust vernier thrusters (1 x counter reverse vernier thruster nozzle mounted on the side of each leg nacelle/air intake, 1 x wing thruster roll control system on each wingtip);

18x P&W LHP04 low-thrust vernier thrusters beneath multipurpose hook/handles

Performance:

Battroid Mode: maximum walking speed 160 km/h

Fighter Mode: at 10,000 m Mach 2.71; at 30,000+ m Mach 3.87

g limit: in space +7

Thrust-to-weight ratio: empty 3.47; standard T-O 2.49; maximum T-O 1.24

Design Features:

3-mode variable transformation; variable geometry wing; vertical take-off and landing; control-configurable vehicle; single-axis thrust vectoring; three "magic hand" manipulators for maintenance use; retractable canopy shield for Battroid mode and atmospheric reentry; option of GBP-1S system, atmospheric-escape booster, or FAST Pack system

Transformation:

Standard time from Fighter to Battroid (automated): under 5 sec.

Min. time from Fighter to Battroid (manual): 0.9 sec.

Armament:

2x internal Mauler RÖV-20 anti-aircraft laser cannon, firing 6,000 pulses per minute

1x Howard GU-11 55 mm three-barrel Gatling gun pod with 200 RPG, fired at 1,200 rds/min

4x underwing hard points for a wide variety of ordnance, including

12x AMM-1 hybrid guided multipurpose missiles (3/point), or

12x MK-82 LDGB conventional bombs (3/point), or

6x RMS-1 large anti-ship reaction missiles (2/outboard point, 1/inboard point), or

4x UUM-7 micro-missile pods (1/point) each carrying 15 x Bifors HMM-01 micro-missiles,

or a combination of above load-outs

The kit and its assembly:

Well, once in a while I dig one of these vintage ARII kits out of the mecha pile and let the spirits flow. This one was a kind of mental distraction, after putting together eight models for the “RAF Centenary” group build at whatifmodelers.com – and it’s the realization of an idea I had maybe 20 years ago when I worked part-time at a painter. One day I came at a wholesale shop across a rattle can with RAL 1000 (Beigegrün), a kind of yellow-ish RAF Sky and one of the ugliest colors you can imagine beyond RLM02. But I thought “One day I’ll try to paint a VF-1 with THIS, and it will certainly not look bad…”.

Said and done, the VF-1J remained basically OOB but received some mods and updates. First of all, the kit was to be displayed in flight, with its wheels tucked up, so I added one of my home-made standard display stands to the gun pod.

Then the kit received, as a standard treatment, some characteristic blade antennae on the back and the nose which the kit simply lacks, due to the small scale and its simplicity.

Then came some cosmetic additions – partly canonical, partly fictional. The IRST fairing in front of the cockpit as well as the sensor mounted on the wing roots were inspired by official source material. The fairings on the lower legs are home-made and also inspired by authentic VF-1s, even though their shape is different. The RHAWS antennae at the tips of the fins are a similar case, improvised with styrene sheet and putty. The missile pods were scratched from leftover AMM-1 missile heads and styrene profile, for more ordnance and a more streamlined look than the OOB dozen of AMM-1s on the underwing pylons. Last but not least, the cockpit received an extended dashboard (filling the space between the pilot’s legs) and a pilot figure.

Painting and markings:

Green! This became the theme that would make the idea of RAL 1000 as basic color tolerable. I settled for a uniform livery, inspired by a profile found in a source book (even though it was be basically blue). I wanted a somewhat plausible and convincing look.

Basic painting was done with brushes and most of the trim in bright green and white was done with generic decal sheet material. A tedious process, but in the end a convenient solution. Some very light post-shading (with Humbrol 90) was done, shifting the overall RAL 1000 into a more greenish direction.

The decals and stencils come mostly from the OOB sheet, but some individual markings were gathered from the scrap box. For instance, the green clovers on the fins’ outsides come from a Hasegawa Ki-61, while the USN-style code “ET” on the fins’ insides are tactical letter codes from an RAF SEPECAT Jaguar.

A small and quick interim project – and the RAL 1000-based livery does actually not look as bad as (secretly) expected. In fact, the green livery is a nice contrast to the red roundels – a bit unusual in the Macross universe, but the Valkyrie looks good!

+++ DISCLAIMER +++

Nothing you see here is real, even though the conversion or the presented background story might be based on authentic facts. BEWARE!

Some background:

The VF-1 was developed by Stonewell/Bellcom/Shinnakasu for the U.N. Spacy by using alien Overtechnology obtained from the SDF-1 Macross alien spaceship. Its production was preceded by an aerodynamic proving version of its airframe, the VF-X. Unlike all later VF vehicles, the VF-X was strictly a jet aircraft, built to demonstrate that a jet fighter with the features necessary to convert to Battroid mode was aerodynamically feasible. After the VF-X's testing was finished, an advanced concept atmospheric-only prototype, the VF-0 Phoenix, was flight-tested from 2005 to 2007 and briefly served as an active-duty fighter from 2007 to the VF-1's rollout in late 2008, while the bugs were being worked out of the full-up VF-1 prototype (VF-X-1).

However, the fighter remained active in many second line units and continued to show its worthiness years later, e. g. through Milia Jenius who would use her old VF-1 fighter in defense of the colonization fleet - 35 years after the type's service introduction!

General characteristics:

All-environment variable fighter and tactical combat Battroid,

used by U.N. Spacy, U.N. Navy, U.N. Space Air Force

Accommodation:

Pilot only in Marty & Beck Mk-7 zero/zero ejection seat

Dimensions:

Fighter Mode:

Length 14.23 meters

Wingspan 14.78 meters (at 20° minimum sweep)

Height 3.84 meters

Battroid Mode:

Height 12.68 meters

Width 7.3 meters

Length 4.0 meters

Empty weight: 13.25 metric tons;

Standard T-O mass: 18.5 metric tons;

MTOW: 37.0 metric tons

Power Plant:

2x Shinnakasu Heavy Industry/P&W/Roice FF-2001 thermonuclear reaction turbine engines, output 650 MW each, rated at 11,500 kg in standard or in overboost (225.63 kN x 2)

4 x Shinnakasu Heavy Industry NBS-1 high-thrust vernier thrusters (1 x counter reverse vernier thruster nozzle mounted on the side of each leg nacelle/air intake, 1 x wing thruster roll control system on each wingtip);

18 x P&W LHP04 low-thrust vernier thrusters beneath multipurpose hook/handles

The S-FAST Pack added 4x P&W+EF-2001 booster thrusters with 120.000 kg each, plus a total of 28x P&W LHP04 low-thrust vernier thrusters

Performance:

Battroid Mode: maximum walking speed 160 km/h

Fighter Mode: at 10,000 m Mach 2.71; at 30,000+ m Mach 3.87

g limit: in space +7

Thrust-to-weight ratio: empty 3.47; standard T-O 2.49; maximum T-O 1.24

Design Features:

3-mode variable transformation; variable geometry wing; vertical take-off and landing; control-configurable vehicle; single-axis thrust vectoring; three "magic hand" manipulators for maintenance use; retractable canopy shield for Battroid mode and atmospheric reentry; option of GBP-1S system, atmospheric-escape booster, or FAST Pack system

Transformation:

Standard time from Fighter to Battroid (automated): under 5 sec.

Min. time from Fighter to Battroid (manual): 0.9 sec.

Armament:

2x internal Mauler RÖV-20 anti-aircraft laser cannon, firing 6,000 pulses per minute

1x Howard GU-11 55 mm three-barrel Gatling gun pod with 200 RPG, fired at 1,200 rds/min

4x underwing hard points for a wide variety of ordnance, including

12x AMM-1 hybrid guided multipurpose missiles (3/point), or

12x MK-82 LDGB conventional bombs (3/point), or

6x RMS-1 large anti-ship reaction missiles (2/outboard point, 1/inboard point), or

4x UUM-7 micro-missile pods (1/point) each carrying 15 x Bifors HMM-01 micro-missiles,

or a combination of above load-outs

The optional Shinnakasu Heavy Industry S-FAST Pack 2.1 augmentative space weapon system added:

6x micro-missiles in two NP-AR-01 micro-missile launcher pods (mounted rear-ward under center ventral section in Fighter mode or on lower arm sections in GERWALK/Battroid mode)

4x12 micro missiles in four HMMP-02 micro-missile launchers, one inside each booster pod

The kit and its assembly:

This VF-1 is another contribution to the “Old Kit” Group Build at whatifmodelers.com, running in late 2016. I am not certain about the moulds’ inception date, but since it is an ARII incarnation of this type of kit and even moulded in the early pastel green styrene, I’d think that it was produced in 1982 or 83.

Anyway, I love the Macross VF-1, IMHO a design masterpiece created by Shoji Kawamori and one of my favorite mecha designs ever, because it was created as a late 70ies style jet fighter that could transform into a robot in a secondary role. As a simple, purposeful military vehicle. And not like a flashy robot toy.

Effectively, this Super Valkyrie is a highly modified OOB kit with many donation parts, and this kit is a bit special, for several reasons. There are several 1:100 OOB kits with FAST Packs from ARII/Bandai available (and still around today), but these are normally only Battroids or Gerwalks with additional parts for the FAST kit conversion. The kit I used here is different: it is, after maybe 25 years of searching and building these kits, the #70 from the original production run. It is (so far!) the only Fighter mode kit with the additional FAST Pack parts! Must be rare, and I have never seen it in catalogues?

Until today, I converted my Super or Strike Valkyries from Gerwalk kits, a task that needs some improvisation esp. around the folded arms between the legs, and there’s no OOB option for an extended landing gear. The latter made this Fighter mode kit very attractive, even though the actual kit is pretty disappointing, and AFAIK this kit variant is only available as a VF-1S.

With the Super Valkyrie fighter kit you receive basically a Gerwalk with a standard fighter cockpit (which includes a front wheel well and an extended front wheel leg), plus extra parts. The leg/engine-mounted NP-FB-01 systems are less bulbous than the parts on the Gerwalk or Battroid kit, and the OOB dorsally mounted NP-BP-01 boosters are TINY, maybe 1:120 or even 1:144! WTF?

Further confusion: the kit includes a set of lower arm parts with integrated rocket launchers, but these are not necessary at all for the Fighter build?! As a kind of compensation there’s a new and exclusive element that simulates the folded arms under the ‘fuselage’ and which, as an added value, properly holds the hand gun under the fuselage. As a quirky flaw, though, the hand gun itself comes in the extended form for the Battroid/Gerwalk mode. For the fighter in flight mode, it has to be modified, but that’s easily done.

Anyway, with the potential option to build a Super Valkyrie with an extended landing gear, this was my route to go with this vintage kit. The Super Valkyrie already looks bulky with the FAST Pack added, but then I recently found the S-FAST Pack option with two more boosters under the wings – total overkill, but unique. And I had a spare pair of booster bulks in the stash (w/o their nozzles, though), as well as a complete pair of additional bigger standard FAST boosters that could replace the ridiculous OOB parts…

Building such a Super/Strike Valkyrie means building separate components, with a marriage of parts as one of the final steps. Consequently, cockpit, central fuselage with the wings and the air intakes, the folded stabilizer pack, the folded arms element with the handgun, the two legs and the four boosters plus other ordnance had to be built and painted separately.

Here and there, details were changed or added, e. g. a different head (a ‘J’ head for the flight leader’s aircraft with two instead of the rare, OOB ‘S’ variant with four laser cannon), covers for the main landing gear (the latter does not come with wells at all, but I did not scratch them since they are hardly recognizable when the kit is sitting on the ground), the typical blade aerials under the cockpit and the feet had to be modified internally to become truly ‘open’ jet exhausts.

The wing-mounted boosters received new nozzles and their front end was re-sculpted with 2C putty into a square shape, according to reference sketches. Not 100% exact, but the rest of the VF-1 isn’t either.

This VF-1 was also supposed to carry external ordnance and my first choice were four wing-mounted RMS-1 Anti-Ship Reaction Warheads, scratched from four 1.000 lb NATO bombs. But, once finished, I was not happy with them. So I looked for another option, and in a source book I found several laser-guided bombs and missiles, also for orbital use, and from this inspiration comes the final ordnance: four rocket-propelled kinetic impact projectiles. These are actually 1:72 JASDF LGB’s from a Hasegawa weapon set, sans aerodynamic steering surfaces and with rocket boosters added to the tail. Also not perfect, but their white color and sleek shape is a good counterpart to the FAST elements.

Experience from many former builds of this mecha kit family helped a lot, since the #70 kit is very basic and nothing really fits well. Even though there are not many major seams or large elements, PSR work was considerable. This is not a pleasant build, rather a fight with a lot of compromises and semi-accuracies.

Seriously, if you want a decent 1:100 VF-1, I’d rather recommend the much more modern WAVE kits (including more realistic proportions).

Painting and markings:

The paint scheme for this Super Valkyrie was settled upon before I considered the S-FAST Pack addition: U.N. Spacy’s SVF-124 is authentic, as well as its unique camouflage paint scheme.

The latter is a special scheme for the lunar environment where the unit was originally formed and based, with all-black undersides, a high, wavy waterline and a light grey upper surface, plus some medium grey trim and a few colorful US Navy style markings and codes.

My core reference is a ‘naked’ bread-and-butter VF-1A of SVF-124 in Fighter mode, depicted as a profile in a VF-1 source book from SoftBank Publishing. The colors for the FAST Pack elements are guesstimates and personal interpretations, though, since I could not find any reference for their look in this unit.

As a side note, another, later SVF-124 aircraft in a similar design is included as an option in a limited edition 1:72 VF-22S kit from Hasegawa, which is backed by CG pics in a VF-22 source book from Softbank, too.

Furthermore, SVF-124 finds mention in a Japanese modeler magazine, where the aforementioned VF-22S kit was presented in 2008. So there must be something behind the ‘Moon Shooters’ squadron.

According to the Hasegawa VF-22S’s painting instructions, the underside becomes black and the upper surfaces are to be painted with FS36270 (with some darker fields on the VF-22, though, similar to the USAF F-15 counter-shaded air superiority scheme, just a tad darker).

Due to the 1:100 scale tininess of my VF-1, I alternatively went for Revell 75 (RAL 7039), which is lighter and also has a brownish hue, so that the resulting aircraft would not look too cold and murky, and not resemble an USAF aircraft.

All FAST Pack elements were painted in a uniform dark grey (Humbrol 32), while some subtle decorative trim on the upper surfaces, e.g. the canopy frame, an anti-glare panel and a stripe behind the cockpit and decoration trim on the wings’ upper surfaces, was added with Revell 77 (RAL 7012). Overall, colors are rather dull, but IMHO very effective in the “landscape” this machine is supposed to operate, and the few colorful markings stand out even more!

The cockpit interior was painted in a bluish grey, with reddish brown seat cushions (late 70ies style!), and the landing gear became all white. For some added detail I painted the wings’ leading edges in a mustard tone (Humbrol 225, Mid Stone).

The kit received some weathering (black ink wash, drybrushing on panels) and extra treatment of the panel lines – even though the FAST Pack elements hide a lot of surface or obscure view.

More color and individuality came with the markings. The standard decals like stencils or the U.N. Spacy insignia come from the kit’s and some other VF-1s’ OOB sheets.

Based on the SVF-124 VF-1 profile and taking the basic design a bit further, I used dull red USAF 45° digits for the 2nd flight leader’s “200” modex and the Apollo Base’s code “MA” on the dorsal boosters. Some discreet red trim was also applied to the FAST Packs – but only a little.

Since all of SVF-124’s aircraft are rumored to carry personal markings, including nose art and similar decorations, I tried to give this VF-1JS a personal note: the pin-up badges on the dorsal boosters come from a Peddinghouse decal sheet for Allied WWII tanks, placed on a silver roundel base. Unfortunately (and not visible before I applied them) the pin-up decal was not printed on a white basis, so that the contrast on the silver is not very strong, but I left it that way. Additionally, the tagline “You’re a$$ next, Jerry” (which IS printed in opaque white…?) was added next to the artwork – but it’s so tiny that you have to get really close to decipher it at all…

Finally, after some soot stains around the exhausts and some vernier nozzels with graphite, the kit received a coat of matt acrylic varnish.

Building this vintage VF-1 kit took a while and a lot of effort, but I like the result: with the S-FAST Pack, the elegant VF-1 turned into a massive space fighter hulk! The normal Super Valkyries already look very compact and purposeful, but this here is truly menacing. Especially when standing on its own feet/landing gear, with its nose-down stance and the small, original wheels, this thing reminds of a Space Shuttle that had just landed.

Good that I recently built a simple VF-1 fighter as a warm-up session. ARII’s kit #70 is not a pleasant build, rather a fight with the elements and coupled with a lot of compromises – if you want a Super Valkyrie Fighter in 1:100, the much more modern WAVE kit is IMHO the better option (and actually not much more pricey than this vintage collector’s item). But for the vintage feeling, this exotic model kit was just the right ticket, and it turned, despite many weaknesses and rather corny details, into an impressive fighter. Esp. the lunar camouflage scheme looks odd, but very unique and purposeful.

Anyway, with so many inherent flaws of the ARII kit, my former method of converting a pure (and much more common) Gerwalk kit into a space-capable VF-1 fighter is not less challenging and complicated than trying to fix this OOB option into a decent model. :-/

Some background:

The VF-1 was developed by Stonewell/Bellcom/Shinnakasu for the U.N. Spacy by using alien Overtechnology obtained from the SDF-1 Macross alien spaceship. Its production was preceded by an aerodynamic proving version of its airframe, the VF-X. Unlike all later VF vehicles, the VF-X was strictly a jet aircraft, built to demonstrate that a jet fighter with the features necessary to convert to Battroid mode was aerodynamically feasible. After the VF-X's testing was finished, an advanced concept atmospheric-only prototype, the VF-0 Phoenix, was flight-tested from 2005 to 2007 and briefly served as an active-duty fighter from 2007 to the VF-1's rollout in late 2008, while the bugs were being worked out of the full-up VF-1 prototype (VF-X-1).

However, the fighter remained active in many second line units and continued to show its worthiness years later, e. g. through Milia Jenius who would use her old VF-1 fighter in defense of the colonization fleet - 35 years after the type's service introduction!

General characteristics:

All-environment variable fighter and tactical combat Battroid,

used by U.N. Spacy, U.N. Navy, U.N. Space Air Force and U.N. Spacy Marines

Accommodation:

Single pilot in Marty & Beck Mk-7 zero/zero ejection seat

Dimensions:

Fighter Mode:

Length 14.23 meters

Wingspan 14.78 meters (at 20° minimum sweep)/8.30 meters (at 70° maximum sweep)

Height 3.84 meters

Battroid Mode:

Height 12.68 meters

Width 7.3 meters

Length 4.0 meters

Empty weight: 13.25 metric tons

Standard T-O mass: 18.5 metric tons

MTOW: 37.0 metric tons

Powerplant:

2x Shinnakasu Heavy Industry/P&W/Roice FF-2001 thermonuclear reaction turbine engines, output 650 MW each, rated at 11,500 kg in standard or in overboost (225.63 kN x 2)

4x Shinnakasu Heavy Industry NBS-1 high-thrust vernier thrusters (1x counter reverse vernier thruster nozzle mounted on the side of each leg nacelle/air intake, 1x wing thruster roll control system on each wingtip)

18x P&W LHP04 low-thrust vernier thrusters beneath multipurpose hook/handles

Performance:

Battroid Mode: maximum walking speed 160 km/h

Fighter Mode: at 10,000 m Mach 2.71; at 30,000+ m Mach 3.87

g limit: in space +7

Thrust-to-weight ratio: empty 3.47; standard T-O 2.49; maximum T-O 1.24

Design Features:

3-mode variable transformation; variable geometry wing; vertical take-off and landing; control-configurable vehicle; single-axis thrust vectoring; three "magic hand" manipulators for maintenance use; retractable canopy shield for Battroid mode and atmospheric reentry; option of GBP-1S system, atmospheric-escape booster, or FAST Pack system

Transformation:

Standard time from Fighter to Battroid (automated): under 5 sec.

Min. time from Fighter to Battroid (manual): 0.9 sec.

Armament:

2x internal Mauler RÖV-20 anti-aircraft laser cannon, firing 6,000 pulses per minute

1x Howard GU-11 55 mm three-barrel Gatling gun pod with 200 RPG, fired at 1,200 rds/min

4x underwing hard points for a wide variety of ordnance, including:

- 12x AMM-1 hybrid guided multipurpose missiles (3/point), or

- 12x MK-82 LDGB conventional bombs (3/point), or

- 6x RMS-1 large anti-ship reaction missiles (2/outboard point, 1/inboard point), or

- 4x UUM-7 micro-missile pods (1/point) each carrying 15 x Bifors HMM-01 micro-missiles,

- or a combination of above load-outs

The kit and its assembly:

This build was inspired by a Macross source book find, but the build did not go without a personal twist, and therefore it is not 100% canonical. The VR-1D two seater recce Valkyrie as such is “real”, though, and the basis for the build was a standard 1:100 VF-1D Arii kit. Beyond the standard improvements with extra blade antennae and two pilot figures for in-flight display, I did some other changes in order to get away from the standard VF-1D look.

One of these are the radar sensors on top of the fins - carved from 1.5mm styrene sheet and replacing the original fin tips. On the nose flanks I added flat SLAR antennae, which I extended downwards so that the familiar VF-1 nose would appear quite different (inspired by the Grumman F9F-8P’s outlines). The panels are 0.5mm styrene sheet and blended into the fuselage with putty. In front of the cockpit an IRST sensor was added, actually a simple piece of sprue.

The conformal ECM fairings on the legs were originally drop tank halves (from a Matchbox Saab 29), reduced in depth so far that only shallow bulges remained.

Instead of the GU-11 gun pod under the fuselage I used a camera pod from an 1:72 Luftwaffe Tornado. This is a little massive for the slender 1:100 Valkyrie, but the camera ports and the overall shape and length were just too promising. I cut away the original attachment pylon, reversed the pod, cut off its rounded rear section and added an spherical, clear “eye ball” at the front end (which is actually a ball joint from a vintage Matchbox aircraft display :D).

A vertical styrene tube was used to mount the pod under the Valkyrie, and it is at the same time an adapter for my standard wire display, so that the VR-1D can be presented in flight, with the landing gear tucked up.

Painting and markings:

The paint scheme is based on the rather unique (if not surreal, but effective!) low-level camouflage carried by some of the JASDF's RF-4EJs, operated by the 501st Hikotai (beyond a maritime and a Europe One scheme), as well as the F-1. As far as I could find out, the upper tones are FS 34097, 34108 and 30372, and white from below, while the pattern itself is identical to the Phantom II’s USAF SEA scheme.

The tones I used are Humbrol 168 (Hemp), a mix of 101 (Mid Green) and a little 76 Uniform Green, for a more bluish hue, and a mix of 108 (WWI Green) with some 252 (RLM 82). Instead of white, I rather used a very light grey (Humbrol 147, FS 36495) for the undersides.

Later, after a black ink washing, these basic colors were lightened through panel post-shading with slightly more pale mixes of these tones.

The cockpit was painted in canonical colors, with a medium grey interior, black ejection seats and red brown cushions. The air intakes became dark grey (Revell 77). Since the Valkyrie would be displayed in flight, with the thick and distorting canopy closed, only basic painting was done inside, including the two figures - they just received a basic Macross pilot suit look, but, as a personal twist, the crew received different jumpsuits in red and blue.

The markings were mostly taken from the OOB sheet (with full color kite roundels, making this aircraft look even more JASDF-ish, plus some typical stencils), extras are the 501 Hikotai's famous woodpecker emblem from a Hasegawa 1:72 Phantom II kit and the USN style modex. The dielectric fairings on the nose were created with ivory decal sheet, other antenna covers were painted with Humbrol 7. The exhausts/feet were painted with Modelmaster Titanium Metallizer.

Finally, the kit received an overall coat with matt acrylic varnish (Italeri).

Another VF-1 for the collection, this time a kind of JASDF tribute build – and a mix between canonical and personal elements. However, an interesting result - the "real" JASDF paint scheme looks a little odd, but somehow the camouflage suits the VF-1 well?

40% Regen Wahrscheinlichkeit

sieht also so aus!

drizzle - Sprühregen

-

HDR

1/8 S

ISO 1250

#

-

Kombinationskraftwagen (Klasse M1)

-

GROßRAUM - Limousine

Visio-Van

Starke Motorisierung:

DW10 D / RHE 110 kW (150 PS) /

Drehmoment bei min−1 bei 3750

340 Nm / ab 2000 rpm

Technik moderner Turbodiesel - Turbo Diesel Commonrail injection

de.wikipedia.org/wiki/Groupe_PSA

Der DW10 war der erste Dieselmotor von PSA mit Direkteinspritzung. Er hat einen Hubraum von 2,0 l (1997 cm³) mit einer Bohrung von 85 mm sowie einem Hub von 88 mm.

16 Ventile,

Common-Rail-Einspritzung,

Turbolader,

Ladeluftkühler Citroën C4

Dieser 2,0-l-Motor wurde gemeinsam von Peugeot-Ingenieuren in Frankreich im Auftrag von PSA und Ford Motor Company entwickelt.

de.wikipedia.org/wiki/PSA-EW/DW-Motor#DW10

Sie werden in verschiedene PKW-Modellen von Citroën, Peugeot, Ford, Mazda, BMW Mini, Suzuki, Toyota, Fiat, Lancia, und Volvo verwendet und angepasst.

de.wikipedia.org/wiki/PSA-DV-Motor

This 2.0 l engine was developed by Peugeot engineers in France on behalf of both PSA and Ford Motor Company

It features a 16-valve cylinder head with twin belt driven camshafts (inlet camshaft connected to cambelt with exhaust camshaft indirectly linked via a timing chain) and utilises a variable geometry turbocharger with overboost function. An intercooler is now always present.

Pressure 1800 bar

- with new adaptive piezo-electric injectors for 7x6 - 42 injections are possible

An all-new engine architecture is claimed to deliver reduced friction and a clean-burning combustion system.

-

The 2.0 engines utilising a System from Siemens - associated with new piezo-electric injectors in which each nozzle is equipped with seven apertures, which allows the number of injections to be multiplied (potentially up to six per cycle) and ensures meticulous uniformity of the diesel injection spray pattern.

As a result of this optimised air/diesel mix, combustion is more complete and more uniform, and therefore reduces emissions at source.

This engine architecture is capable of delivering more than 200 PS up to 450 NM.

------------

2.0 Citroën Motoren

...

auch in

Citroën DS5

Peugeot 3008

Peugeot 5008

DW10 - Motor Varianten - (Drehmoment adaptiert)

werden in

Volvo, Lancia, BMW, Ford, Jaguar, Fiat, Suzuki, Opel u. andere Marken verbaut.

de.wikipedia.org/wiki/PSA-EW/DW-Motor

....

Fazit

Bis zu sieben Gäste oder viel Gepäck passen hier rein.

Fahrwerk, Antrieb und das Geräuschniveau sorgen für ein insgesamt gehobenes Komfortniveau.

Der große C4 (Grand C4) betont dabei eher die gemütliche Art des Reisens und verwöhnt mit Wohlfühl-Ambiente und großartiger Panorama Frontscheibe.

-

Die erste Tankfüllung war noch normales Diesel vom Vorgänger:

Fazit:

nach drei Tankfüllungen Premium Diesel hatte ich ein viel flotteres Auto!

Tipp

schnell hochschalten

Motorbremse nutzen

auf Drehzahl achten - optimalen Gang wählen

-

Der Turbolader arbeitet effektiv ab

2000 - 3750 U/min Drehmomentanstieg :

Leistung und Verbrauch Optimum bei 2750 - 150 PS or 148 bhp or 110 kW @ 3750 rpm

active cruiser - Tempomat

Sparfahrt:

Optimum 2250 rpm

°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°

Some background:

The VF-1 was developed by Stonewell/Bellcom/Shinnakasu for the U.N. Spacy by using alien Overtechnology obtained from the SDF-1 Macross alien spaceship. Its production was preceded by an aerodynamic proving version of its airframe, the VF-X. Unlike all later VF vehicles, the VF-X was strictly a jet aircraft, built to demonstrate that a jet fighter with the features necessary to convert to Battroid mode was aerodynamically feasible. After the VF-X's testing was finished, an advanced concept atmospheric-only prototype, the VF-0 Phoenix, was flight-tested from 2005 to 2007 and briefly served as an active-duty fighter from 2007 to the VF-1's rollout in late 2008, while the bugs were being worked out of the full-up VF-1 prototype (VF-X-1).

However, the fighter remained active in many second line units and continued to show its worthiness years later, e. g. through Milia Jenius who would use her old VF-1 fighter in defense of the colonization fleet - 35 years after the type's service introduction!

General characteristics:

All-environment variable fighter and tactical combat Battroid,

used by U.N. Spacy, U.N. Navy, U.N. Space Air Force and U.N.S. Marine Corps

Accommodation:

Pilot only in Marty & Beck Mk-7 zero/zero ejection seat

Dimensions:

Fighter Mode:

Length 14.23 meters

Wingspan 14.78 meters (at 20° minimum sweep)

Height 3.84 meters

Battroid Mode:

Height 12.68 meters

Width 7.3 meters

Length 4.0 meters

Empty weight: 13.25 metric tons;

Standard T-O mass: 18.5 metric tons;

MTOW: 37.0 metric tons

Power Plant:

2x Shinnakasu Heavy Industry/P&W/Roice FF-2001 thermonuclear reaction turbine engines, output 650 MW each, rated at 11,500 kg in standard or 225.63 kN in overboost

4x Shinnakasu Heavy Industry NBS-1 high-thrust vernier thrusters (1 x counter reverse vernier thruster nozzle mounted on the side of each leg nacelle/air intake, 1 x wing thruster roll control system on each wingtip)

18x P&W LHP04 low-thrust vernier thrusters beneath multipurpose hook/handles

Performance:

Battroid Mode: maximum walking speed 160 km/h

Fighter Mode: at 10,000 m Mach 2.71; at 30,000+ m Mach 3.87

g limit: in space +7

Thrust-to-weight ratio: empty 3.47; standard T-O 2.49; maximum T-O 1.24

Design Features:

3-mode variable transformation; variable geometry wing; vertical take-off and landing; control-configurable vehicle; single-axis thrust vectoring; three "magic hand" manipulators for maintenance use; retractable canopy shield for Battroid mode and atmospheric reentry; option of GBP-1S system, atmospheric-escape booster, or FAST Pack system

Transformation:

Standard time from Fighter to Battroid (automated): under 5 sec.

Min. time from Fighter to Battroid (manual): 0.9 sec.

Armament:

2x Mauler RÖV-20 anti-aircraft laser cannon, firing 6,000 pulses per minute

1x Howard GU-11 55 mm three-barrel Gatling gun pod with 200 RPG, fired at 1,200 rds/min

4x underwing hard points for a wide variety of ordnance, including…

12x AMM-1 hybrid guided multipurpose missiles (3/point), or

12x MK-82 LDGB conventional bombs (3/point), or

6x RMS-1 large anti-ship reaction missiles (2/outboard point, 1/inboard point), or

4x UUM-7 micro-missile pods (1/point) each carrying 15 x Bifors HMM-01 micro-missiles,

or a combination of above load-outs

2x auxiliary hardpoints on the legs for light loads like a FLIR sensor, laser rangefinder/

target designator or ECM pod (typically not used for offensive ordnance)

The kit and its assembly:

This fictional VF-1 was born from spontaneous inspiration and the question if the USMC could have adopted the Valkyrie within the Macross time frame and applied its rather special grey/green/black paint scheme from the Nineties that was carried by AH-1s, CH-46s and also some OV-10s.

The model is a simple, vintage ARII VF-1 in Fighter mode, in this case a VF-1D two-seater that received the cockpit section and the head unit from a VF-1J Gerwalk model to create a single seater. While the parts are interchangeable, the Gerwalk and the Fighter kit have different molds for the cockpit sections and the canopies, too. This is mostly evident through the lack of a front landing gear well under the Gerwalk's cockpit - I had to "carve" a suitable opening into the bottom of the nose, but that was not a problem.

The kit was otherwiese built OOB, with the landing gear down and (finally, after the scenic flight pictures) with an open canopy for final display among the rest of my VF-1 fleet. However, I added some non-canonical small details like small hardpoints on the upper legs and the FLIR and targeting pods on them, scratched from styrene bits.

The ordnance was changed from twelve AMM-1 missiles under the wings to something better suited for attack missions. Finding suitable material became quite a challenge, though. I eventually settled on a pair of large laser-guided smart bombs and two pairs of small air-to-ground missile clusters. The LGBs are streamlined 1:72 2.000 lb general purpose bombs, IIRC from a Hobby Boss F-5E kit, and the launch tubes were scratched from a pair of Bazooka starters from an Academy 1:72 P-51 kit. The ventral standard GU-11 pod was retained and modified to hold a scratched wire display for in-flight pictures at its rear end.

Some blade antennae were added around the hull as a standard measure to improve the simple kit’s look. The cockpit was taken OOB, I just added a pilot figure for the scenic shots and the thick canopy was later mounted on a small lift arm in open position.

Painting and markings:

Adapting the characteristic USMC three-tone paint scheme for the VF-1 was not easy; I used the symmetric pattern from the AH-1s as starting point for the fuselage and gradually evolved it onto the wings into an asymmetric free-form pattern, making sure that the areas where low-viz roundels and some vital stencils would sit on grey for good contrast and readability. The tones became authentic: USMC Field Green (FS 34095, Humbrol 105), USN Medium Grey (FS 35237, Humbrol 145) and black (using Revell 06 Tar Black, which is a very dark grey and not pure black). For some contrast the wings' leading edges were painted with a sand brown/yellow (Humbrol 94).

The landing gear became standard white (Revell 301), the cockpit interior medium grey (Revell 47) with a black ejection seat with brown cushions, and the air intakes as well as the interior of the VG wings dark grey (Revell 77). To set the camouflaged nose radome apart I gave it a slightly different shade of green. The GU-11 pod became bare metal (Revell 91). The LGBs were painted olive drab overall while the AGMs became light grey.

Roundels as well as the UNSMC and unit tags were printed at home in black on clear decal sheet. The unit markings came from an Academy OV-10. The modex came from an 1:72 Revell F8F sheet. Stencils becvame eitrher black or white to keep the low-viz look, just a few tiny color highlights bereak the camouflage up. Some of the characteristic vernier thrusters around the hull are also self-made decals.

Finally, after some typical details and position lights were added with clear paint over a silver base, the small VF-1 was sealed with a coat of matt acrylic varnish.

A spontaneous interim project - and the UMSC's three-tone paint scheme suits the VF-1 well, which might have been a very suitable aircraft for this service and its mission profiles. I am still a bit uncertain about the camouflage's effectiveness, though - yes, it's disruptive, but the color contrasts are so high that a hiding effect seems very poor, even though I find that the scheme works well over urban terrain? It's fictional, though, and even though there are canonical U.N.S. Marines VF-1s to be found in literature, none I came across so far carried this type of livery.

Some background:

The VF-1 was developed by Stonewell/Bellcom/Shinnakasu for the U.N. Spacy by using alien Overtechnology obtained from the SDF-1 Macross alien spaceship. The space-capable VF-1's combat debut was on February 7, 2009, during the Battle of South Ataria Island - the first battle of Space War I - and remained the mainstay fighter of the U.N. Spacy for the entire conflict. Introduced in 2008, the VF-1 would be out of frontline service just five years later, though.

Furthermore, the VF-1EX was also outfitted with other electronic contingency functions like AI-assisted flight and remote override controls. Some of these features could be disabled according to necessity or pilot preferences. The gun pod unit was retained but was usually only loaded with paintball rounds for mock combat. For the same purpose, one of the original Mauler RÖV-20 anti-aircraft laser cannon in the "head unit" was replaced by a long-range laser target designator. AMM-1 missiles with dummy warheads or other training ordnance could be added to the wing hardpoints, but the VF-1EX was never seen being equipped this way - it remained an agile dogfighter.

General characteristics:

All-environment variable fighter and tactical combat Battroid. 3-mode variable transformation; variable geometry wing; vertical take-off and landing; control-configurable vehicle; single-axis thrust vectoring; three "magic hand" manipulators for maintenance use; retractable canopy shield for Battroid mode and atmospheric reentry; EG-01M/MP EX-Gear system; option of GBP-1S system, atmospheric-escape booster, or FAST Pack system.

Accommodation:

Single pilot in Marty & Beck Mk-7 zero/zero ejection seat

Dimensions:

Battroid Mode:

Height 12.68 meters

Width 7.3 meters

Length 4.0 meters

Fighter Mode:

Length 14.23 meters

Wingspan 14.78 meters (at 20° minimum sweep)

Height 3.84 meters

Empty weight: 13.25 metric tons

Standard take-off mass: 18.5 metric tons

MTOW: 37.0 metric tons

Power Plant:

2x Shinnakasu Heavy Industry/P&W/Roice FF-2001 thermonuclear reaction turbine engines, output 650 MW each, rated at 11,500 kg in standard or in overboost (225.63 kN x 2);

4x Shinnakasu Heavy Industry NBS-1 high-thrust vernier thrusters (1 x counter reverse vernier thruster nozzle mounted on the side of each leg nacelle/air intake, 1 x wing thruster roll control system on each wingtip);

18x P&W LHP04 low-thrust vernier thrusters beneath multipurpose hook/handles

Performance:

Battroid Mode: maximum walking speed 160 km/h

Fighter Mode: at 10,000 m Mach 2.71; at 30,000+ m Mach 3.87

g limit: in space +7

Thrust-to-weight ratio: empty 3.47; standard TOW 2.49; maximum TOW 1.24

Transformation:

Standard time from Fighter to Battroid (automated): under 5 sec.

Min. time from Fighter to Battroid (manual): 0.9 sec.

Armament:

1x Mauler RÖV-20 anti-aircraft laser cannon in the "head" unit, firing 6,000 pulses per minute

1x Howard GU-11 55 mm three-barrel Gatling gun pod with 200 RPG, fired at 1,200 rpm

4x underwing hardpoints for a wide variety of ordnance

The kit and its assembly:

The VF-1EX Valkyrie is a Variable Fighter introduced in the Macross Δ television series, and it's, as described above, a replica training variant that resembles outwardly the VF-1J. There's even a Hasegawa 1:72 kit from 2016 of this obscure variant.

However, what I tried to recreate is a virtual (and purely fictional/non-canonical) VF-1EX, re-skinned by someone called David L. on the basis of a virtual VF-1S 3D model with a 2 m wing span (sounds like ~1:8 scale) for the Phoenix R/C simulator software. Check this for reference: www.supermotoxl.com/projects-articles/ready-to-drive-fly-...). How bizarre can things be/become? And how sick is a hardware model of it, though...?

I found the complex livery very attractive and had the plan to build a 1:100 model for some years now. But it took this long to gather enough mojo to tackle this project, due to the tricolor paint scheme's complex nature...

The "canvas" for this stunt is a vintage Arii 1:100 VF-1 kit, built OOB except for some standard mods. The kit was actually a VF-1A, but I had a spare VF-1J head unit in store as a suitable replacement. Externally, some dorsal blade aerials and vanes on the nose were added, the attachment points under the wings for the pylons were PSRed away. A pilot figure was added to the cockpit because this model would be displayed in flight. As a consequence, the ventral gun pod received an adapter at its tail and I added one of my home-brew wire displays, created on the basis of the kit's OOB plastic base.

Painting and markings:

As mentioned above, this VF-1 is based on a re-skinned virtual R/C model, and its creator apparently took inspiration from a canonical VF fighter, namely a VF-31C "Siegfried", and specifically the "Mirage Farina Jenius Custom" version from the Macross Δ series that plays around 2051. Screenshots from the demo flight video under the link above provided various perspectives as painting reference, but the actual implementation on the tiny model caused serious headaches.

The VF-1's shapes are rather round and curvy, the model's jagged surface and small size prohibited masking. The kit is IMHO also best built and painted in single sub-assemblies, but upon closer inspection the screenshots revealed some marking inconsistencies (apparently edited from various videos?), and certain areas were left uncertain, e .g. the inside of the legs or the whole belly area. Therefore, this model is just a personal interpretation of the design, and as such I also deviated in the markings.

The paints became Humbrol 20 (Crimson) and 58 (Magenta), plus Revell 301 (Semi-gloss White), and they were applied with brushes. To replicate the edgy and rather fragmented pattern I initially laid down the two reds in a rather rough and thin fashion and painted the white dorsal and ventral areas. Once thoroughly dry, the white edges were quasi-masked with white decal material, either with stripes of various widths or tailored from sheet material, e. g. for the "wedges" on the wings and fins and the dorsal "swallow tail". This went more smoothly than expected, with a very convincing and clean result that i'd never had achieved with brushes alone, even with masking attempts, which would probably have led to chaos and too much paint on the model.

Other details like the grey leading edges or the air intakes were created with grey and black decal material, too.

No weathering was done, since the aircraft would be clean and in pristine condition, but I used a soft pencil to emphasize the engraved panel lines, esp. on white background. The gun pod became grey and the exhausts, painted in Revell 91 (Iron), were treated with graphite for a darker shade and a more metallic look.

Stencils came from the kit's OOB sheet, but only a few, since there was already a lot "going on" on the VF-1's hull. The flash-shaped Xaos insignia and the NUNS markings on legs and wings were printed at home - as well as the small black vernier thrusters all around the hull, for a uniform look. The USN style Modex and the small letter code on the fins came from an Colorado Decals F-5 sheet, for an aggressor aircraft.

Finally, the kit was sealed overall with semi-gloss acrlyic varnish (which turned out glossier than expected...) and position lights etc. added with translucent paint on top of a silver base.

Well, while the VF-1 was built OOB with no major mods and just some cosmetical upgrades, the paint scheme and its finish were more demanding - and I am happy that the "decal masking" trick worked so fine. The paint scheme surely is attractive, even though it IMHO does not really takes the VF-1's lines into account. Nevertheless, I am certain that there are not many models that are actually based on a virtual 1:8 scale 3D model of an iconic SF fighter, so that this VF-1EX might be unique.

Some background:

The VF-1 was developed by Stonewell/Bellcom/Shinnakasu for the U.N. Spacy by using alien Overtechnology obtained from the SDF-1 Macross alien spaceship. Its production was preceded by an aerodynamic proving version of its airframe, the VF-X. Unlike all later VF vehicles, the VF-X was strictly a jet aircraft, built to demonstrate that a jet fighter with the features necessary to convert to Battroid mode was aerodynamically feasible. After the VF-X's testing was finished, an advanced concept atmospheric-only prototype, the VF-0 Phoenix, was flight-tested from 2005 to 2007 and briefly served as an active-duty fighter from 2007 to the VF-1's rollout in late 2008, while the bugs were being worked out of the full-up VF-1 prototype (VF-X-1).

However, the fighter remained active in many second line units and continued to show its worthiness years later, e. g. through Milia Jenius who would use her old VF-1 fighter in defense of the colonization fleet - 35 years after the type's service introduction!

General characteristics:

All-environment variable fighter and tactical combat Battroid,

used by U.N. Spacy, U.N. Navy, U.N. Space Air Force and U.N.S. Marine Corps

Accommodation:

Pilot only in Marty & Beck Mk-7 zero/zero ejection seat

Dimensions:

Fighter Mode:

Length 14.23 meters

Wingspan 14.78 meters (at 20° minimum sweep)

Height 3.84 meters

Battroid Mode:

Height 12.68 meters

Width 7.3 meters

Length 4.0 meters

Empty weight: 13.25 metric tons;

Standard T-O mass: 18.5 metric tons;

MTOW: 37.0 metric tons

Power Plant:

2x Shinnakasu Heavy Industry/P&W/Roice FF-2001 thermonuclear reaction turbine engines, output 650 MW each, rated at 11,500 kg in standard or 225.63 kN in overboost

4x Shinnakasu Heavy Industry NBS-1 high-thrust vernier thrusters (1 x counter reverse vernier thruster nozzle mounted on the side of each leg nacelle/air intake, 1 x wing thruster roll control system on each wingtip)

18x P&W LHP04 low-thrust vernier thrusters beneath multipurpose hook/handles

Performance:

Battroid Mode: maximum walking speed 160 km/h

Fighter Mode: at 10,000 m Mach 2.71; at 30,000+ m Mach 3.87

g limit: in space +7

Thrust-to-weight ratio: empty 3.47; standard T-O 2.49; maximum T-O 1.24

Design Features:

3-mode variable transformation; variable geometry wing; vertical take-off and landing; control-configurable vehicle; single-axis thrust vectoring; three "magic hand" manipulators for maintenance use; retractable canopy shield for Battroid mode and atmospheric reentry; option of GBP-1S system, atmospheric-escape booster, or FAST Pack system

Transformation:

Standard time from Fighter to Battroid (automated): under 5 sec.

Min. time from Fighter to Battroid (manual): 0.9 sec.

Armament:

2x Mauler RÖV-20 anti-aircraft laser cannon, firing 6,000 pulses per minute

1x Howard GU-11 55 mm three-barrel Gatling gun pod with 200 RPG, fired at 1,200 rds/min

4x underwing hard points for a wide variety of ordnance, including…

12x AMM-1 hybrid guided multipurpose missiles (3/point), or

12x MK-82 LDGB conventional bombs (3/point), or

6x RMS-1 large anti-ship reaction missiles (2/outboard point, 1/inboard point), or

4x UUM-7 micro-missile pods (1/point) each carrying 15 x Bifors HMM-01 micro-missiles,

or a combination of above load-outs

2x auxiliary hardpoints on the legs for light loads like a FLIR sensor, laser rangefinder/

target designator or ECM pod (typically not used for offensive ordnance)

The kit and its assembly:

This fictional VF-1 was born from spontaneous inspiration and the question if the USMC could have adopted the Valkyrie within the Macross time frame and applied its rather special grey/green/black paint scheme from the Nineties that was carried by AH-1s, CH-46s and also some OV-10s.

The model is a simple, vintage ARII VF-1 in Fighter mode, in this case a VF-1D two-seater that received the cockpit section and the head unit from a VF-1J Gerwalk model to create a single seater. While the parts are interchangeable, the Gerwalk and the Fighter kit have different molds for the cockpit sections and the canopies, too. This is mostly evident through the lack of a front landing gear well under the Gerwalk's cockpit - I had to "carve" a suitable opening into the bottom of the nose, but that was not a problem.

The kit was otherwiese built OOB, with the landing gear down and (finally, after the scenic flight pictures) with an open canopy for final display among the rest of my VF-1 fleet. However, I added some non-canonical small details like small hardpoints on the upper legs and the FLIR and targeting pods on them, scratched from styrene bits.

The ordnance was changed from twelve AMM-1 missiles under the wings to something better suited for attack missions. Finding suitable material became quite a challenge, though. I eventually settled on a pair of large laser-guided smart bombs and two pairs of small air-to-ground missile clusters. The LGBs are streamlined 1:72 2.000 lb general purpose bombs, IIRC from a Hobby Boss F-5E kit, and the launch tubes were scratched from a pair of Bazooka starters from an Academy 1:72 P-51 kit. The ventral standard GU-11 pod was retained and modified to hold a scratched wire display for in-flight pictures at its rear end.

Some blade antennae were added around the hull as a standard measure to improve the simple kit’s look. The cockpit was taken OOB, I just added a pilot figure for the scenic shots and the thick canopy was later mounted on a small lift arm in open position.

Painting and markings:

Adapting the characteristic USMC three-tone paint scheme for the VF-1 was not easy; I used the symmetric pattern from the AH-1s as starting point for the fuselage and gradually evolved it onto the wings into an asymmetric free-form pattern, making sure that the areas where low-viz roundels and some vital stencils would sit on grey for good contrast and readability. The tones became authentic: USMC Field Green (FS 34095, Humbrol 105), USN Medium Grey (FS 35237, Humbrol 145) and black (using Revell 06 Tar Black, which is a very dark grey and not pure black). For some contrast the wings' leading edges were painted with a sand brown/yellow (Humbrol 94).

The landing gear became standard white (Revell 301), the cockpit interior medium grey (Revell 47) with a black ejection seat with brown cushions, and the air intakes as well as the interior of the VG wings dark grey (Revell 77). To set the camouflaged nose radome apart I gave it a slightly different shade of green. The GU-11 pod became bare metal (Revell 91). The LGBs were painted olive drab overall while the AGMs became light grey.

Roundels as well as the UNSMC and unit tags were printed at home in black on clear decal sheet. The unit markings came from an Academy OV-10. The modex came from an 1:72 Revell F8F sheet. Stencils becvame eitrher black or white to keep the low-viz look, just a few tiny color highlights bereak the camouflage up. Some of the characteristic vernier thrusters around the hull are also self-made decals.

Finally, after some typical details and position lights were added with clear paint over a silver base, the small VF-1 was sealed with a coat of matt acrylic varnish.

A spontaneous interim project - and the UMSC's three-tone paint scheme suits the VF-1 well, which might have been a very suitable aircraft for this service and its mission profiles. I am still a bit uncertain about the camouflage's effectiveness, though - yes, it's disruptive, but the color contrasts are so high that a hiding effect seems very poor, even though I find that the scheme works well over urban terrain? It's fictional, though, and even though there are canonical U.N.S. Marines VF-1s to be found in literature, none I came across so far carried this type of livery.

Some background:

The VF-1 was developed by Stonewell/Bellcom/Shinnakasu for the U.N. Spacy by using alien Overtechnology obtained from the SDF-1 Macross alien spaceship. It was preceded into production by an aerodynamic proving version of its airframe, the VF-X. Unlike all later VF vehicles, the VF-X was strictly a jet aircraft, built to demonstrate that a jet fighter with the features necessary to convert to Battroid mode was aerodynamically feasible.

However, the fighter remained active in many second line units and continued to show its worthiness years later, e. g. through Milia Jenius who would use her old VF-1 fighter in defense of the colonization fleet - 35 years after the type's service introduction!

Equipment Type: all-environment variable fighter and tactical combat battroid

Government: U.N. Spacy, U.N. Navy, U.N. Space Air Force

Accommodation: pilot only in Marty & Beck Mk-7 zero/zero ejection seat

Dimensions:

Fighter Mode:

Length 14.23 meters

Wingspan 14.78 meters (fully extended)

Height 3.84 meters

Battroid Mode:

Height 12.68 meters

Width 7.3 meters

Length 4.0 meters

Empty weight: 13.25 metric tons;

Standard T-O mass: 18.5 metric tons;

MTOW: 37.0 metric tons

Power Plant:

2x Shinnakasu Heavy Industry/P&W/Roice FF-2001 thermonuclear reaction turbine engines, output 650 MW each, rated at 11,500 kg in standard or in overboost (225.63 kN x 2)

4 x Shinnakasu Heavy Industry NBS-1 high-thrust vernier thrusters (1 x counter reverse vernier thruster nozzle mounted on the side of each leg nacelle/air intake, 1 x wing thruster roll control system on each wingtip);

18 x P&W LHP04 low-thrust vernier thrusters beneath multipurpose hook/handles

Performance:

Battroid Mode: maximum walking speed 160 km/h

Fighter Mode: at 10,000 m Mach 2.71; at 30,000+ m Mach 3.87

g limit: in space +7

Thrust-to-weight ratio: empty 3.47; standard T-O 2.49; maximum T-O 1.24

Design Features: 3-mode variable transformation; variable geometry wing; vertical take-off and landing; control-configurable vehicle; single-axis thrust vectoring; three "magic hand" manipulators for maintenance use; retractable canopy shield for Battroid mode and atmospheric reentry; option of GBP-1S system, atmospheric-escape booster, or FAST Pack system

Transformation:

Standard time from Fighter to Battroid (automated): under 5 sec.

Min time from Fighter to Battroid (manual): 0.9 sec.

Armament:

1 x internal Mauler RÖV-20 anti-aircraft laser cannon, firing 6,000 pulses per minute

1 x Howard GU-11 55 mm three-barrel Gatling gun pod with 200 rds fired at 1,200 rds/min

4 x underwing hard points for a wide variety of ordnance, including

12x AMM-1 hybrid guided multipurpose missiles (3/point), or

12x MK-82 LDGB conventional bombs (3/point), or

6x RMS-1 large anti-ship reaction missiles (2/outboard point, 1/inboard point), or

4x UUM-7 micro-missile pods (1/point) each carrying 15 x Bifors HMM-01 micro-missiles, or a combination of above load-outs

Optional Armament:

Shinnakasu Heavy Industry GBP-1S ground-combat protector weapon system, or

Shinnakasu Heavy Industry FAST Pack augmentative space weapon system

The kit and its assembly:

This is one more 1:100 Bandai VF-1, IMHO a design masterpiece created by Shoji Kawamori and one of my favorite mecha designs ever, because it was created as an late 70ies style jet fighter that could transform into a robot in a secondary role, a simple, purposeful military vehicle.

I’ve built more than a dozen of these kits over the last 25 years, so I know it pretty well, especially its weaknesses. But the small Valkyries, originally manufactured by IMAI and now still on sale through Bandai (they pop up every 5 years when another Macross anniversary occurs…) are simple and easy to modify, and to me a kind of clean canvas for weird and colorful ideas. The VF-1 carries a huge creative potential.

This VF-1A was built almost OOB. I just made some minor mods, partly based on the design benchmark (see below). These include a pilot figure for the cockpit – actually a modified, HO (1:87) scale sitting soldier from Roco Minitanks; 1:100 pilot figures are hard to find, but I found that these squatted figures fill the cockpit and the relatively flat seat pretty well. A few characteristic blade antennae (four under the lower front fuselage and two behind the cockpit) were added.

Since this VF-1A was to be displayed in flight, the landing gear could be omitted and the covers mounted in closed position. The underwing ordnance was omitted and the pylons’ attachment points faired over. The handgun, hanging under the fuselage in flight mode, was replaced by a smoke generator and an associate tank - actually a drop tank from an Airfix 1:72 Saab Viggen. It also holds an adapter for a scratch-built display, which is taller and less obvious than the OOB offering.

Painting and markings:

This is where the actual work took place – and this Canadian VF-1 is a personal interpretation of a fictional custom Valkyrie profiles by CrazyCanuck, posted at macross.net in the fan art section (check

www.macross2.net/m3/forfansonly/crazycanuck/layouts-snowb... for reference).

There’s hardly a livery that does not suit the elegant VF-1, and I found the Snowbirds scheme very pleasing. I also liked the idea that the VF-1 would be used all over the world, with national adaptations like a Royal Navy(!) variant backed by official publications and source books. So, why not a Canadian Valkyrie?

For easy painting the kit was built in separate section (cockpit, fuselage with wings and butterfly tail, legs, head and the smoke generator), and the use of white AND red –together with yellow IMHO the most challenging tone to work with on models – scared me.

Due to the kit’s tininess I painted everything by brush with enamels. The basic tones are Humbrol 130 and 19, the latter turned out to be a very good representation of the Snowbirds’ deep scarlet red tone.

The cheatline all long the VF-1, literally from nose to feet, was created with decals. Most come from an 1:72 Snowbirds CL-141 Tutor sheet from Victoria productions in Canada (excellent stuff!), part of the trim had to be improvised and extended with generic blue and white decal sheet.

In contrast to the CrazyCanuck illustration, I decided to add Macross insignia instead of Canadian roundels – keeping in line with similar “nationalized” VF-1s in official source books. Some Canadian symbols like the flags on the fins, the roundels in the round depressions at the ankles and the huge Canadian flag on the starboard wing (a personal addition, the maple leaf is a decal while the rest was done with paint) were adopted, though, and they suit the Valkyrie well.

After basis painting was done I followed the engraved panel lines with a fine, very soft pencil. An experiment, because I just wanted a subtle emphasis esp. on the white surfaces, not the 2D/comic-style full black panel lines of former builds.

No other weathering was done, since this VF-1 was to look clean and bright. Finally, everything was sealed with a coat of gloss acrylic varnish, and the characteristic clear parts (visor on the head, position lights on the legs, laser muzzles, position lights) were laid out with acrylic silver and filled out with various shades of clear paint. Just small things, but they enhance the overall impression of the simple model kit a lot.

After a long time it’s a good feeling to build an VF-1 again, and creating a rather bright one was fun, even though the paint job was challenging. But patience and clever improvisation paid out: that Snowbird really stands out, the Snowbirds livery suits the VF-1 well! :-D

Some background:

The VF-1 was developed by Stonewell/Bellcom/Shinnakasu for the U.N. Spacy by using alien Overtechnology obtained from the SDF-1 Macross alien spaceship. Its production was preceded by an aerodynamic proving version of its airframe, the VF-X. Unlike all later VF vehicles, the VF-X was strictly a jet aircraft, built to demonstrate that a jet fighter with the features necessary to convert to Battroid mode was aerodynamically feasible. After the VF-X's testing was finished, an advanced concept atmospheric-only prototype, the VF-0 Phoenix, was flight-tested from 2005 to 2007 and briefly served as an active-duty fighter from 2007 to the VF-1's rollout in late 2008, while the bugs were being worked out of the full-up VF-1 prototype (VF-X-1).

However, the fighter remained active in many second line units and continued to show its worthiness years later, e. g. through Milia Jenius who would use her old VF-1 fighter in defense of the colonization fleet - 35 years after the type's service introduction!

General characteristics:

All-environment variable fighter and tactical combat Battroid,

used by U.N. Spacy, U.N. Navy, U.N. Space Air Force and U.N. Spacy Marines

Accommodation:

Single pilot in Marty & Beck Mk-7 zero/zero ejection seat

Dimensions:

Fighter Mode:

Length 14.23 meters

Wingspan 14.78 meters (at 20° minimum sweep)

Height 3.84 meters

Battroid Mode:

Height 12.68 meters

Width 7.3 meters

Length 4.0 meters

Empty weight: 13.25 metric tons

Standard T-O mass: 18.5 metric tons

MTOW: 37.0 metric tons

Powerplant:

2x Shinnakasu Heavy Industry/P&W/Roice FF-2001 thermonuclear reaction turbine engines, output 650 MW each, rated at 11,500 kg in standard or in overboost (225.63 kN x 2)

4x Shinnakasu Heavy Industry NBS-1 high-thrust vernier thrusters (1x counter reverse vernier thruster nozzle mounted on the side of each leg nacelle/air intake, 1x wing thruster roll control system on each wingtip)

18x P&W LHP04 low-thrust vernier thrusters beneath multipurpose hook/handles

Performance:

Battroid Mode: maximum walking speed 160 km/h

Fighter Mode: at 10,000 m Mach 2.71; at 30,000+ m Mach 3.87

g limit: in space +7

Thrust-to-weight ratio: empty 3.47; standard T-O 2.49; maximum T-O 1.24

Design Features:

3-mode variable transformation; variable geometry wing; vertical take-off and landing; control-configurable vehicle; single-axis thrust vectoring; three "magic hand" manipulators for maintenance use; retractable canopy shield for Battroid mode and atmospheric reentry; option of GBP-1S system, atmospheric-escape booster, or FAST Pack system

Transformation:

Standard time from Fighter to Battroid (automated): under 5 sec.

Min. time from Fighter to Battroid (manual): 0.9 sec.

Armament:

1x internal Mauler RÖV-20 anti-aircraft laser cannon, firing 6,000 pulses per minute

1x Howard GU-11 55 mm three-barrel Gatling gun pod with 200 RPG, fired at 1,200 rds/min

4x underwing hard points for a wide variety of ordnance, including:

- 12x AMM-1 hybrid guided multipurpose missiles (3/point), or

- 12x MK-82 LDGB conventional bombs (3/point), or

- 6x RMS-1 large anti-ship reaction missiles (2/outboard point, 1/inboard point), or

- 4x UUM-7 micro-missile pods (1/point) each carrying 15 x Bifors HMM-01 micro-missiles,

- or a combination of above load-outs

The kit and its assembly:

Another spontaneous interim build in a busy time - if I want to build something "on autopilot", an ARII VF-1 in fighter mode is a safe bet. The trigger was that I realized that I had, despite having built far more than twenty VF-1s so far, none of them carried a US Navy "low viz" paint scheme? No idea why this had slipped my attention - even though I had already built one in a USAF "Egypt One" scheme and a modified (non-transformable) VF-1D in a low contrast Keith Ferris splinter scheme with USN colors.

I dug out VF-1 fighter from the pile and built the kit mostly OOB - but with some detail updates. This time, the kit would receive an extended landing gear and an open canopy for ground display. Consequently, I added side consoles and a dashboard extension to the cockpit. On the wings, the slats and the flaps were lowered, but not extended, and for additional excitement I opened the spoilers on the wings - because their red interior would be a nice contrast to the overall grey aircraft (see below).

Characteristic blade antennae were added to the nose flanks and on the spine, and the pilot figure was only added for the beauty pics.

The ordnance was in part taken OOB, too, with six AMM-1 missiles on the outer pylons but an 1:100 AN/ALQ-131 ECM pod (from a Revell 1:100 A-10) and a single stand-off missile (an 1:144 AGM-86 ALCM, left over from an Academy B-1B kit, just mounted upside down) on the inner pair of pylons.

Even though the model would later stand on its own legs, I added the option to attach a display (my almost-patented wire construction that uses the OOB display base) to the back of the ventral gun pod.

Painting and markings:

I am not certain if the "Compass Ghost" paint scheme is actually canonical for the Macross universe - Hasegawa offered such a "low viz" VF-1 as an option in one of their fighter kits, but I haven't found any sign of a USN paint scheme in official source material, except for some all light-grey Battroids that do not look like a "Compass Ghost" aircraft/mecha. After 2009, many VF-1s were officially painted in a low-viz scheme - but this would rather be an overall FS 36440 (Light Gull Grey) livery with full color markings than a totally subdued multi-grey paint scheme?

However, I found the idea plausible, and also took it as a challenge. Consequently, the aircraft was painted in typical USN colors: FS 36320 (Dark Compass Ghost Grey) from Modelmaster on the upper surfaces and FS 36375 (Light Compass Ghost Grey, Humbrol 127) from below. The area around the cockpit was painted with FS 35237 (Grey Blue, Humbrol 145), inspired by USN F-14 Tomcats, as well as the head unit.

Air intakes, the gun pod and some details were painted with Revell 77 (RAL 7012), the land gear was painted glossy white. The cockpit was held in standard colors, with medium gray interior, a black ejection seat and reddish brown upholstery and brown "black boxes". As a stark contrast to the all-grey exterior, I painted the interior of the spoilers on the wings in bright red (Revell 330, RAL 3000 Feuerrot) and added thin red decal strips to the lowered slats, too.

Many markings like the roundels and the modex' were designed and printed on clear decal sheet with an inkjet printer, and any other bright marking was replaced with grey alternatives from the decal scrap box. The lightning markings on the fins come belong to a Malaysian MiG-29, taken from a Begemot sheet. All in all I wanted a very "dry" and subdued look, with only the ordnance not being light bluish grey.

Once painted the kit received a light black ink wash and the engraved panel lines were traced with a very soft pencil, with some additional thin panel lines and details. Finally, the kit was sealed with matt acrylic varnish (Italeri).

I guess that I might be able to build this kit blindfolded, and the whole affair was completed in just three days, since the paint scheme itself was not complex. The result is interesting, though, and a nice contrast to the normally very bright and colorful VF-1s in my collection.

Some background:

The VF-1 was developed by Stonewell/Bellcom/Shinnakasu for the U.N. Spacy by using alien Overtechnology obtained from the SDF-1 Macross alien spaceship. Its production was preceded by an aerodynamic proving version of its airframe, the VF-X. Unlike all later VF vehicles, the VF-X was strictly a jet aircraft, built to demonstrate that a jet fighter with the features necessary to convert to Battroid mode was aerodynamically feasible. After the VF-X's testing was finished, an advanced concept atmospheric-only prototype, the VF-0 Phoenix, was flight-tested from 2005 to 2007 and briefly served as an active-duty fighter from 2007 to the VF-1's rollout in late 2008, while the bugs were being worked out of the full-up VF-1 prototype (VF-X-1).

However, the fighter remained active in many second line units and continued to show its worthiness years later, e. g. through Milia Jenius who would use her old VF-1 fighter in defense of the colonization fleet - 35 years after the type's service introduction!

General characteristics:

All-environment variable fighter and tactical combat Battroid,

used by U.N. Spacy, U.N. Navy, U.N. Space Air Force and U.N.S. Marine Corps

Accommodation:

Pilot only in Marty & Beck Mk-7 zero/zero ejection seat

Dimensions:

Fighter Mode:

Length 14.23 meters

Wingspan 14.78 meters (at 20° minimum sweep)

Height 3.84 meters

Battroid Mode:

Height 12.68 meters

Width 7.3 meters

Length 4.0 meters

Empty weight: 13.25 metric tons;

Standard T-O mass: 18.5 metric tons;

MTOW: 37.0 metric tons

Power Plant:

2x Shinnakasu Heavy Industry/P&W/Roice FF-2001 thermonuclear reaction turbine engines, output 650 MW each, rated at 11,500 kg in standard or 225.63 kN in overboost

4x Shinnakasu Heavy Industry NBS-1 high-thrust vernier thrusters (1 x counter reverse vernier thruster nozzle mounted on the side of each leg nacelle/air intake, 1 x wing thruster roll control system on each wingtip)

18x P&W LHP04 low-thrust vernier thrusters beneath multipurpose hook/handles

Performance:

Battroid Mode: maximum walking speed 160 km/h

Fighter Mode: at 10,000 m Mach 2.71; at 30,000+ m Mach 3.87

g limit: in space +7

Thrust-to-weight ratio: empty 3.47; standard T-O 2.49; maximum T-O 1.24

Design Features:

3-mode variable transformation; variable geometry wing; vertical take-off and landing; control-configurable vehicle; single-axis thrust vectoring; three "magic hand" manipulators for maintenance use; retractable canopy shield for Battroid mode and atmospheric reentry; option of GBP-1S system, atmospheric-escape booster, or FAST Pack system

Transformation:

Standard time from Fighter to Battroid (automated): under 5 sec.

Min. time from Fighter to Battroid (manual): 0.9 sec.

Armament:

2x Mauler RÖV-20 anti-aircraft laser cannon, firing 6,000 pulses per minute

1x Howard GU-11 55 mm three-barrel Gatling gun pod with 200 RPG, fired at 1,200 rds/min

4x underwing hard points for a wide variety of ordnance, including…

12x AMM-1 hybrid guided multipurpose missiles (3/point), or

12x MK-82 LDGB conventional bombs (3/point), or

6x RMS-1 large anti-ship reaction missiles (2/outboard point, 1/inboard point), or

4x UUM-7 micro-missile pods (1/point) each carrying 15 x Bifors HMM-01 micro-missiles,

or a combination of above load-outs

2x auxiliary hardpoints on the legs for light loads like a FLIR sensor, laser rangefinder/

target designator or ECM pod (typically not used for offensive ordnance)

The kit and its assembly:

This fictional VF-1 was born from spontaneous inspiration and the question if the USMC could have adopted the Valkyrie within the Macross time frame and applied its rather special grey/green/black paint scheme from the Nineties that was carried by AH-1s, CH-46s and also some OV-10s.

The model is a simple, vintage ARII VF-1 in Fighter mode, in this case a VF-1D two-seater that received the cockpit section and the head unit from a VF-1J Gerwalk model to create a single seater. While the parts are interchangeable, the Gerwalk and the Fighter kit have different molds for the cockpit sections and the canopies, too. This is mostly evident through the lack of a front landing gear well under the Gerwalk's cockpit - I had to "carve" a suitable opening into the bottom of the nose, but that was not a problem.

The kit was otherwiese built OOB, with the landing gear down and (finally, after the scenic flight pictures) with an open canopy for final display among the rest of my VF-1 fleet. However, I added some non-canonical small details like small hardpoints on the upper legs and the FLIR and targeting pods on them, scratched from styrene bits.

The ordnance was changed from twelve AMM-1 missiles under the wings to something better suited for attack missions. Finding suitable material became quite a challenge, though. I eventually settled on a pair of large laser-guided smart bombs and two pairs of small air-to-ground missile clusters. The LGBs are streamlined 1:72 2.000 lb general purpose bombs, IIRC from a Hobby Boss F-5E kit, and the launch tubes were scratched from a pair of Bazooka starters from an Academy 1:72 P-51 kit. The ventral standard GU-11 pod was retained and modified to hold a scratched wire display for in-flight pictures at its rear end.

Some blade antennae were added around the hull as a standard measure to improve the simple kit’s look. The cockpit was taken OOB, I just added a pilot figure for the scenic shots and the thick canopy was later mounted on a small lift arm in open position.

Painting and markings:

Adapting the characteristic USMC three-tone paint scheme for the VF-1 was not easy; I used the symmetric pattern from the AH-1s as starting point for the fuselage and gradually evolved it onto the wings into an asymmetric free-form pattern, making sure that the areas where low-viz roundels and some vital stencils would sit on grey for good contrast and readability. The tones became authentic: USMC Field Green (FS 34095, Humbrol 105), USN Medium Grey (FS 35237, Humbrol 145) and black (using Revell 06 Tar Black, which is a very dark grey and not pure black). For some contrast the wings' leading edges were painted with a sand brown/yellow (Humbrol 94).

The landing gear became standard white (Revell 301), the cockpit interior medium grey (Revell 47) with a black ejection seat with brown cushions, and the air intakes as well as the interior of the VG wings dark grey (Revell 77). To set the camouflaged nose radome apart I gave it a slightly different shade of green. The GU-11 pod became bare metal (Revell 91). The LGBs were painted olive drab overall while the AGMs became light grey.

Roundels as well as the UNSMC and unit tags were printed at home in black on clear decal sheet. The unit markings came from an Academy OV-10. The modex came from an 1:72 Revell F8F sheet. Stencils becvame eitrher black or white to keep the low-viz look, just a few tiny color highlights bereak the camouflage up. Some of the characteristic vernier thrusters around the hull are also self-made decals.

Finally, after some typical details and position lights were added with clear paint over a silver base, the small VF-1 was sealed with a coat of matt acrylic varnish.

A spontaneous interim project - and the UMSC's three-tone paint scheme suits the VF-1 well, which might have been a very suitable aircraft for this service and its mission profiles. I am still a bit uncertain about the camouflage's effectiveness, though - yes, it's disruptive, but the color contrasts are so high that a hiding effect seems very poor, even though I find that the scheme works well over urban terrain? It's fictional, though, and even though there are canonical U.N.S. Marines VF-1s to be found in literature, none I came across so far carried this type of livery.

Some background:

The VF-1 was developed by Stonewell/Bellcom/Shinnakasu for the U.N. Spacy by using alien Overtechnology obtained from the SDF-1 Macross alien spaceship. Its production was preceded by an aerodynamic proving version of its airframe, the VF-X. Unlike all later VF vehicles, the VF-X was strictly a jet aircraft, built to demonstrate that a jet fighter with the features necessary to convert to Battroid mode was aerodynamically feasible. After the VF-X's testing was finished, an advanced concept atmospheric-only prototype, the VF-0 Phoenix, was flight-tested from 2005 to 2007 and briefly served as an active-duty fighter from 2007 to the VF-1's rollout in late 2008, while the bugs were being worked out of the full-up VF-1 prototype (VF-X-1).

However, the fighter remained active in many second line units and continued to show its worthiness years later, e. g. through Milia Jenius who would use her old VF-1 fighter in defense of the colonization fleet - 35 years after the type's service introduction!

General characteristics:

All-environment variable fighter and tactical combat Battroid,

used by U.N. Spacy, U.N. Navy, U.N. Space Air Force and U.N.S. Marine Corps

Accommodation:

Pilot only in Marty & Beck Mk-7 zero/zero ejection seat

Dimensions:

Fighter Mode:

Length 14.23 meters

Wingspan 14.78 meters (at 20° minimum sweep)

Height 3.84 meters

Battroid Mode:

Height 12.68 meters

Width 7.3 meters

Length 4.0 meters

Empty weight: 13.25 metric tons;

Standard T-O mass: 18.5 metric tons;

MTOW: 37.0 metric tons

Power Plant:

2x Shinnakasu Heavy Industry/P&W/Roice FF-2001 thermonuclear reaction turbine engines, output 650 MW each, rated at 11,500 kg in standard or 225.63 kN in overboost

4x Shinnakasu Heavy Industry NBS-1 high-thrust vernier thrusters (1 x counter reverse vernier thruster nozzle mounted on the side of each leg nacelle/air intake, 1 x wing thruster roll control system on each wingtip)

18x P&W LHP04 low-thrust vernier thrusters beneath multipurpose hook/handles

Performance:

Battroid Mode: maximum walking speed 160 km/h

Fighter Mode: at 10,000 m Mach 2.71; at 30,000+ m Mach 3.87

g limit: in space +7

Thrust-to-weight ratio: empty 3.47; standard T-O 2.49; maximum T-O 1.24

Design Features:

3-mode variable transformation; variable geometry wing; vertical take-off and landing; control-configurable vehicle; single-axis thrust vectoring; three "magic hand" manipulators for maintenance use; retractable canopy shield for Battroid mode and atmospheric reentry; option of GBP-1S system, atmospheric-escape booster, or FAST Pack system

Transformation:

Standard time from Fighter to Battroid (automated): under 5 sec.

Min. time from Fighter to Battroid (manual): 0.9 sec.

Armament:

2x Mauler RÖV-20 anti-aircraft laser cannon, firing 6,000 pulses per minute

1x Howard GU-11 55 mm three-barrel Gatling gun pod with 200 RPG, fired at 1,200 rds/min

4x underwing hard points for a wide variety of ordnance, including…

12x AMM-1 hybrid guided multipurpose missiles (3/point), or

12x MK-82 LDGB conventional bombs (3/point), or

6x RMS-1 large anti-ship reaction missiles (2/outboard point, 1/inboard point), or

4x UUM-7 micro-missile pods (1/point) each carrying 15 x Bifors HMM-01 micro-missiles,

or a combination of above load-outs

2x auxiliary hardpoints on the legs for light loads like a FLIR sensor, laser rangefinder/

target designator or ECM pod (typically not used for offensive ordnance)

The kit and its assembly:

This fictional VF-1 was born from spontaneous inspiration and the question if the USMC could have adopted the Valkyrie within the Macross time frame and applied its rather special grey/green/black paint scheme from the Nineties that was carried by AH-1s, CH-46s and also some OV-10s.

The model is a simple, vintage ARII VF-1 in Fighter mode, in this case a VF-1D two-seater that received the cockpit section and the head unit from a VF-1J Gerwalk model to create a single seater. While the parts are interchangeable, the Gerwalk and the Fighter kit have different molds for the cockpit sections and the canopies, too. This is mostly evident through the lack of a front landing gear well under the Gerwalk's cockpit - I had to "carve" a suitable opening into the bottom of the nose, but that was not a problem.

The kit was otherwiese built OOB, with the landing gear down and (finally, after the scenic flight pictures) with an open canopy for final display among the rest of my VF-1 fleet. However, I added some non-canonical small details like small hardpoints on the upper legs and the FLIR and targeting pods on them, scratched from styrene bits.

The ordnance was changed from twelve AMM-1 missiles under the wings to something better suited for attack missions. Finding suitable material became quite a challenge, though. I eventually settled on a pair of large laser-guided smart bombs and two pairs of small air-to-ground missile clusters. The LGBs are streamlined 1:72 2.000 lb general purpose bombs, IIRC from a Hobby Boss F-5E kit, and the launch tubes were scratched from a pair of Bazooka starters from an Academy 1:72 P-51 kit. The ventral standard GU-11 pod was retained and modified to hold a scratched wire display for in-flight pictures at its rear end.

Some blade antennae were added around the hull as a standard measure to improve the simple kit’s look. The cockpit was taken OOB, I just added a pilot figure for the scenic shots and the thick canopy was later mounted on a small lift arm in open position.

Painting and markings:

Adapting the characteristic USMC three-tone paint scheme for the VF-1 was not easy; I used the symmetric pattern from the AH-1s as starting point for the fuselage and gradually evolved it onto the wings into an asymmetric free-form pattern, making sure that the areas where low-viz roundels and some vital stencils would sit on grey for good contrast and readability. The tones became authentic: USMC Field Green (FS 34095, Humbrol 105), USN Medium Grey (FS 35237, Humbrol 145) and black (using Revell 06 Tar Black, which is a very dark grey and not pure black). For some contrast the wings' leading edges were painted with a sand brown/yellow (Humbrol 94).

The landing gear became standard white (Revell 301), the cockpit interior medium grey (Revell 47) with a black ejection seat with brown cushions, and the air intakes as well as the interior of the VG wings dark grey (Revell 77). To set the camouflaged nose radome apart I gave it a slightly different shade of green. The GU-11 pod became bare metal (Revell 91). The LGBs were painted olive drab overall while the AGMs became light grey.

Roundels as well as the UNSMC and unit tags were printed at home in black on clear decal sheet. The unit markings came from an Academy OV-10. The modex came from an 1:72 Revell F8F sheet. Stencils becvame eitrher black or white to keep the low-viz look, just a few tiny color highlights bereak the camouflage up. Some of the characteristic vernier thrusters around the hull are also self-made decals.

Finally, after some typical details and position lights were added with clear paint over a silver base, the small VF-1 was sealed with a coat of matt acrylic varnish.

A spontaneous interim project - and the UMSC's three-tone paint scheme suits the VF-1 well, which might have been a very suitable aircraft for this service and its mission profiles. I am still a bit uncertain about the camouflage's effectiveness, though - yes, it's disruptive, but the color contrasts are so high that a hiding effect seems very poor, even though I find that the scheme works well over urban terrain? It's fictional, though, and even though there are canonical U.N.S. Marines VF-1s to be found in literature, none I came across so far carried this type of livery.

Some background:

The VF-1 was developed by Stonewell/Bellcom/Shinnakasu for the U.N. Spacy by using alien Overtechnology obtained from the SDF-1 Macross alien spaceship. Its production was preceded by an aerodynamic proving version of its airframe, the VF-X. Unlike all later VF vehicles, the VF-X was strictly a jet aircraft, built to demonstrate that a jet fighter with the features necessary to convert to Battroid mode was aerodynamically feasible. After the VF-X's testing was finished, an advanced concept atmospheric-only prototype, the VF-0 Phoenix, was flight-tested from 2005 to 2007 and briefly served as an active-duty fighter from 2007 to the VF-1's rollout in late 2008, while the bugs were being worked out of the full-up VF-1 prototype (VF-X-1).

However, the fighter remained active in many second line units and continued to show its worthiness years later, e. g. through Milia Jenius who would use her old VF-1 fighter in defense of the colonization fleet - 35 years after the type's service introduction!

General characteristics:

All-environment variable fighter and tactical combat Battroid,

used by U.N. Spacy, U.N. Navy, U.N. Space Air Force and U.N.Spacy Marines

Accommodation:

Single pilot in Marty & Beck Mk-7 zero/zero ejection seat

Dimensions:

Fighter Mode:

Length 14.23 meters

Wingspan 14.78 meters (at 20° minimum sweep)

Height 3.84 meters

Battroid Mode:

Height 12.68 meters

Width 7.3 meters

Length 4.0 meters

Empty weight: 13.25 metric tons

Standard T-O mass: 18.5 metric tons

MTOW: 37.0 metric tons

Power Plant:

2x Shinnakasu Heavy Industry/P&W/Roice FF-2001 thermonuclear reaction turbine engines, output 650 MW each, rated at 11,500 kg in standard or in overboost (225.63 kN x 2)

4x Shinnakasu Heavy Industry NBS-1 high-thrust vernier thrusters (1x counter reverse vernier thruster nozzle mounted on the side of each leg nacelle/air intake, 1x wing thruster roll control system on each wingtip)

18x P&W LHP04 low-thrust vernier thrusters beneath multipurpose hook/handles

Performance:

Battroid Mode: maximum walking speed 160 km/h

Fighter Mode: at 10,000 m Mach 2.71; at 30,000+ m Mach 3.87

g limit: in space +7

Thrust-to-weight ratio: empty 3.47; standard T-O 2.49; maximum T-O 1.24

Design Features:

3-mode variable transformation; variable geometry wing; vertical take-off and landing; control-configurable vehicle; single-axis thrust vectoring; three "magic hand" manipulators for maintenance use; retractable canopy shield for Battroid mode and atmospheric reentry; option of GBP-1S system, atmospheric-escape booster, or FAST Pack system

Transformation:

Standard time from Fighter to Battroid (automated): under 5 sec.

Min. time from Fighter to Battroid (manual): 0.9 sec.

Armament:

2x internal Mauler RÖV-20 anti-aircraft laser cannon, firing 6,000 pulses per minute

1x Howard GU-11 55 mm three-barrel Gatling gun pod with 200 RPG, fired at 1,200 rds/min

4x underwing hard points for a wide variety of ordnance, including:

- 12x AMM-1 hybrid guided multipurpose missiles (3/point), or

- 12x MK-82 LDGB conventional bombs (3/point), or

- 6x RMS-1 large anti-ship reaction missiles (2/outboard point, 1/inboard point), or

- 4x UUM-7 micro-missile pods (1/point) each carrying 15 x Bifors HMM-01 micro-missiles,

- or a combination of above load-outs

The kit and its assembly:

This was a spontaneous interim build in a busy time, so that the kit remained almost OOB. The model is one of the vintage ARII kits, and the build circled primarily around the (fictional) livery. The latter is a kind of re-interpretation of a paint scheme that I had applied to a “Wild Weasel” Valkyrie many years ago – it carried a three-tone wraparound scheme which had been inspired by the USAF’s “European One” schemes, also known as “Lizard”, and most popular for having been applied to the A-10s based in Germany. However, I used much more toned-down colors (Dark Slate Grey, Olive Drab and Dark Grey), which created an almost uniform but also very dull look. I wanted something similar, but with “brighter” colors, but also not a copy of the “Lizard” scheme. More about that later.

As already mentioned, the kit remained OOB, just a pilot was added to the cockpit because it would be built with the landing gear tucked up and put on a display. Due to the clear but thick canopy no extra detailing was done inside. Characteristic blade antennae were added to the nose flanks and on the spine.

The ordnance was taken OOB, too, I just replaced two AMM-1 missiles on the outer pylons with a scratched ECM pod and a chaff/flare dispenser.

The display is one of my almost-patented wire constructions that use the OOB display base and is attached to the back of the ventral gun pod.

Painting and markings:

As already mentioned, “European One/Lizard” was the guiding theme, but with the intent to use lighter colors. Another influence was the two-tone scheme which the Brazilian Air Force used on their F-5Es and some Tucano trainers. It consists of FS 34092 (European One Green) and FS 36173 (Neutral Grey), with the green only added to the upper surfaces, in a rather disruptive pattern. I borrowed this basic idea and added a third color, Humbrol 150 (Forest Green), as a lighter alternative to FS 34102 (Medium Green) from the original “Lizard” scheme. The pattern for the upper surfaces was lent from a Vietnam War era RA-3B, which carried different colors, though (three shades of grey). The other tones are Humbrol 149 and Tamiya XF-53.

The cockpit became medium grey (Revell 47) with a brown seat. The air intake interiors landing gear was painted in classic white, while the air intakes and some other details were painted in dark grey (Humbrol 67), which helps brightening the camouflage up. For the same reason I gave the aircraft a black radome – it stands out quite well, but I felt that a grey nose or the extension of the camouflage up to the nose tip would make the Valkyrie look less UNSAF-like. Another factor is a benchmark VF-11 I found in a source book which also carries a kind of European One scheme, and it also has a completely black nose radome.

A black ink wash was used to highlight the engraved panel lines and only light post-shading was done here and there. The wings’ leading edges were created with decal sheet material from TL Modellbau, the low-viz kite roundels were printed at home on transparent decal film. Most stencils were taken from the VF-1’s OOB decal sheet, the squadron markings and the tactical code were puzzled together from the scrap box. The “UNSAF” markings on the legs were created with single 3mm letters, also from TL Modellbau.

Finally, the kit received a coat of matt acrylic varnish (Italeri), just the black radome received a sheen finish.

A quick project, and another camouflaged VF-1 that IMHO proves that there’s hardly any paint scheme that does not suit Shoji Kawamori’s elegant robot/airplane design. Those small Valkyrie kits never get boring, at least to me! :D

Some background:

The VF-1 was developed by Stonewell/Bellcom/Shinnakasu for the U.N. Spacy by using alien Overtechnology obtained from the SDF-1 Macross alien spaceship. Its production was preceded by an aerodynamic proving version of its airframe, the VF-X. Unlike all later VF vehicles, the VF-X was strictly a jet aircraft, built to demonstrate that a jet fighter with the features necessary to convert to Battroid mode was aerodynamically feasible. After the VF-X's testing was finished, an advanced concept atmospheric-only prototype, the VF-0 Phoenix, was flight-tested from 2005 to 2007 and briefly served as an active-duty fighter from 2007 to the VF-1's rollout in late 2008, while the bugs were being worked out of the full-up VF-1 prototype (VF-X-1).

The VF-1 was without doubt the most recognizable variable fighter of Space War I and was seen as a vibrant symbol of the U.N. Spacy even into the first year of the New Era 0001 in 2013. At the end of 2015 the final rollout of the VF-1 was celebrated at a special ceremony, commemorating this most famous of variable fighters. The VF-1 Valkryie was built from 2006 to 2013 with a total production of 5,459 VF-1 variable fighters with several variants (VF-1A = 5,093, VF-1D = 85, VF-1J = 49, VF-1S = 30, VF-1G = 12, VE-1 = 122, VT-1 = 68). However, beyond this original production several “re-built” variants existed, too, and remained active in many second line units and continued to show its worthiness years later, e. g. through Milia Jenius who would use her old VF-1 fighter in defense of the colonization fleet, even after 35 years after the type's service introduction!

General characteristics:

All-environment variable fighter and tactical combat Battroid, used by U.N. Spacy, U.N. Navy, U.N. Space Air Force. 3-mode variable transformation; variable geometry wing; vertical take-off and landing; control-configurable vehicle; single-axis thrust vectoring; three "magic hand" manipulators for maintenance use; retractable canopy shield for Battroid mode and atmospheric reentry; option of GBP-1S system, atmospheric-escape booster, or FAST Pack system

Accommodation:

Single pilot in Marty & Beck Mk-7 zero/zero ejection seat

Dimensions:

Battroid Mode:

Height 12.68 meters

Width 7.3 meters

Length 4.0 meters

Fighter Mode:

Length 14.23 meters

Wingspan 14.78 meters (at 20° minimum sweep)

Height 3.84 meters

Empty weight: 13.25 metric tons

Standard take-off mass: 18.5 metric tons

MTOW: 37.0 metric tons

Power Plant:

2x Shinnakasu Heavy Industry/P&W/Roice FF-2001 thermonuclear reaction turbine engines, output 650 MW each, rated at 11,500 kg in standard or in overboost (225.63 kN x 2);

4x Shinnakasu Heavy Industry NBS-1 high-thrust vernier thrusters (1 x counter reverse vernier thruster nozzle mounted on the side of each leg nacelle/air intake, 1 x wing thruster roll control system on each wingtip);

18x P&W LHP04 low-thrust vernier thrusters beneath multipurpose hook/handles

Performance:

Battroid Mode: maximum walking speed 160 km/h

Fighter Mode: at 10,000 m Mach 2.71; at 30,000+ m Mach 3.87

g limit: in space +7

Thrust-to-weight ratio: empty 3.47; standard TOW 2.49; maximum TOW 1.24

Transformation:

Standard time from Fighter to Battroid (automated): under 5 sec.

Min. time from Fighter to Battroid (manual): 0.9 sec.

Armament:

1x Mauler RÖV-20 anti-aircraft laser cannon in the "head" unit, firing 6,000 pulses per minute

1x Howard GU-11 55 mm three-barrel Gatling gun pod with 200 RPG, fired at 1,200 rds/min

4x underwing hard points for a wide variety of ordnance, including

12x AMM-1 hybrid guided multipurpose missiles (3/point), or

12x MK-82 LDGB conventional bombs (3/point), or

6x RMS-1 large anti-spaceship reaction missiles (2/outboard point, 1/inboard point), or

4x UUM-7 micro-missile pods (1/point) each carrying 15 x Bifors HMM-01 micro-missiles,

or a combination of above load-outs and other guided and unguided ordnance

The kit and its assembly:

After a long time, I found enough mojo to tackle another ARII 1:100 VF-1, but this time in Battroid mode. Unlike the simple Fighter mode kits, ARII’s Battroid kit of the iconic Valkyrie is more demanding and calls for some structural modifications to create a decent and presentable “giant robot” model – OOB, the model remains quite two-dimensional and “stiff”. The much newer WAVE kit in 1:100 scale is certainly a better model of the VF-1, but I love the old ARII kits because of their simplicity.

The kit is a “Super Valykrie” model, but it donated its FAST pack extra parts to a space-capable VF-1 Fighter build a long time ago and has been collecting dust in The Stash™ (SF/mecha sub-department at the Western flank) since then. The complete Battroid model was still left, though, even with most of the decals, and when I recently searched for artwork/visual references for another Macross project I came across screenshots from the original TV series of a canonical VF-1 that I had been planning to build for some years, and so I eventually set things in motion.

The kit was basically built OOB, but it received some upgrades. More severe surgery would be necessary to create a “good” Battroid model – e. g. creating vertical recesses around the torso – but this is IMHO not worthwhile. These updates included additional joints in the upper arms and legs, created with styrene tubes, as well as a new hip construction made from coated steel wire and styrene tube material that allows a three-dimensional posture of the legs - for a more vivid appearance and more dynamic poses. Other small mods that enhance the overall impression are “opened” exhausts inside of the feet and a different, open left hand. The GU-11 pod/handgun was taken OOB, it just received a shoulder belt created with painted masking tape. The single laser cannon on the head received a fairing made from paper tissue drenched with white glue.

Even though the model kit itself is not complex, it is a very early mecha kit: the VF-1 Battroids already came with vinyl caps (some of the contemporary ARII Macross models did not feature these useful items yet), but the model was constructed in an “onion layer” fashion that makes building and painting a protracted affair, esp. on arms and legs. You are supposed to finish a certain section, and then you add the next section like a clamp, while areas of the initial section become inaccessible for sanding and painting inside of the new section. You can only finish the single sections up to basic painting, mask them, and then add the next stage. Adding some joints during the construction phase helped but building an ARII VF-1 Battroid simply takes time and patience…

Painting and markings:

As mentioned above, this Valkyrie’s livery is canonical and it depicts a so-called “Alaska Guard” VF-1, based at the U.N. Spacy’s headquarters at Eielson Air Force Base in the far North of the United States around 2008/9. Several Battroid mode VF-1s in this guise appear during episode #15 of the original Macross TV series and offer a good look at their front and back, even though close inspection reveals that the livery was – intentionally or incidentally – not uniform! There are subtle differences between the VF-1s from the same unit, so that there’s apparently some room for artistic freedom.

However, this rather decorative livery IMHO works best on a VF-1 Battroid model, because the green areas, esp. on head and arms, mostly disappears when the Valkyrie transforms into Fighter mode – in the original TV livery the VF-1 is completely white from above, just with green wing tips and rudders on the V-tail.

A full profile of an “Alaska Guard” VF-1 with more details concerning markings and stencils can furthermore be found in Softbank Publishing’s (discontinued) “Variable Fighter Master File VF-1 Valkyrie” source book, even though these drawings show further differences to the original TV appearance. In the book the unit is identified as SVF-15 “Blue Foxes”, evolved from the real USAF’s 18th Aggressor Squadron in 2008. Looking at the VF-1’s colors, this unit name appears a bit odd, because the livery is basically all-white with olive-green trim? This could be a simple translation issue, though, because “blue” and “green” are in written Japanese described with the same kanji (青, “ao”). On the other side, the 18th Aggressor Squadron was/is nicknamed “Blue Foxes”? Strange, strange…

To ease painting, the model was built in sub-assemblies (see comments above) and treated separately. To avoid brush painting mess with the basic white, the sub-sections received a coat of very light grey (RAL 7047 Telegrau) and a pure white tone, both applied from rattle cans with an attempt to create a light shading effect. The green trim and further details were added with brushes. I used Revell 360 (Fern Green, RAL 6025), because it is a strong but still somewhat dull/subdued tone that IMHO matches the look from the TV series well. Some detail areas like the air intake louvres, the hollow of the knees and the handgun were painted in medium grey (Humbrol 140), so that the contrast to the rest was not too strong. The “feet” received an initial coat of Humbrol 53 (Iron) as a dark primer.

In “reality”, parts of the VF-1’s torso in Battroid mode are actually open – the kit is very simplified. To create an optical illusion of this trench and to visually “stretch” the rather massive breast section, the respective areas were painted with dark grey (Humbrol 79). There are also many position lights all around the hull; these were initially laid out with silver, the bigger ones received felt tip pen details, and they were later overlaid with clear acrylic paints.

Once the basic painting had been done, a light black ink washing was applied to the parts to emphasize engraved panel lines and recesses. After that the jet exhaust ‘feet’ were painted with Humbrol’s Steel Metallizer and some post-shading through dry-brushing was done, concentrating on the green areas. This was rather done for visual plasticity than for a worn look: this Valkyrie was supposed to look quite bright and clean, after all it’s from a headquarter unit and not an active frontline vehicle.

The feet received a thorough graphite treatment, so that the Metallizer’s shine was further enhanced. Some surface details that were not molded into the parts (esp. around the shoulders and the covers of the main landing gear) were painted with a thin black felt tip pen.

Stencils and markings were taken from the kit’s OOB decal sheet. The thin bands around the arms and legs were created with generic 1mm decal strips and all the vernier thrusters (sixteen are visible on the Battroid) were created with home-printed decals – most of them are molded into the parts and apparently supposed to be painted, but the decals are a tidier and more uniform solution.

Before the final assembly, the parts received a coat with matt acrylic varnish. As final measures some black panel lines were emphasized with a felt tip pen and color was added to several lamps and small windows with clear paints.

I can hardly remember when I built my last VF-1 Battroid, but tackling this one after a long while was a nice distraction from my usual what-if builds. I am pleased that this model depicts a canonical Valkyrie from the original TV series beyond the well-known “hero” liveries. Furthermore, green is a rare color among VF-1 liveries, so that it is even more “collectible”.

While the vintage ARII kit is a rather limited affair, adding some joints considerably improved the model’s impression, even though there are definitively better kit options available today when you want to build a 1:100 Battroid — but these do certainly not provide this authentic “Eighties feeling”.

+++ DISCLAIMER +++

Nothing you see here is real, even though the conversion or the presented background story might be based on authentic facts. BEWARE!

Some background:

The VF-1 was developed by Stonewell/Bellcom/Shinnakasu for the U.N. Spacy by using alien Overtechnology obtained from the SDF-1 Macross alien spaceship. Its production was preceded by an aerodynamic proving version of its airframe, the VF-X. Unlike all later VF vehicles, the VF-X was strictly a jet aircraft, built to demonstrate that a jet fighter with the features necessary to convert to Battroid mode was aerodynamically feasible. After the VF-X's testing was finished, an advanced concept atmospheric-only prototype, the VF-0 Phoenix, was flight-tested from 2005 to 2007 and briefly served as an active-duty fighter from 2007 to the VF-1's rollout in late 2008, while the bugs were being worked out of the full-up VF-1 prototype (VF-X-1).

However, the fighter remained active in many second line units and continued to show its worthiness years later, e. g. through Milia Jenius who would use her old VF-1 fighter in defense of the colonization fleet - 35 years after the type's service introduction!

General characteristics:

All-environment variable fighter and tactical combat Battroid,

used by U.N. Spacy, U.N. Navy, U.N. Space Air Force

Accommodation:

Pilot only in Marty & Beck Mk-7 zero/zero ejection seat

Dimensions:

Fighter Mode:

Length 14.23 meters

Wingspan 14.78 meters (at 20° minimum sweep)

Height 3.84 meters

Battroid Mode:

Height 12.68 meters

Width 7.3 meters

Length 4.0 meters

Empty weight: 13.25 metric tons;

Standard T-O mass: 18.5 metric tons;

MTOW: 37.0 metric tons

Power Plant:

2x Shinnakasu Heavy Industry/P&W/Roice FF-2001 thermonuclear reaction turbine engines, output 650 MW each, rated at 11,500 kg in standard or in overboost (225.63 kN x 2)

4 x Shinnakasu Heavy Industry NBS-1 high-thrust vernier thrusters (1 x counter reverse vernier thruster nozzle mounted on the side of each leg nacelle/air intake, 1 x wing thruster roll control system on each wingtip);

18 x P&W LHP04 low-thrust vernier thrusters beneath multipurpose hook/handles

The S-FAST Pack added 4x P&W+EF-2001 booster thrusters with 120.000 kg each, plus a total of 28x P&W LHP04 low-thrust vernier thrusters

Performance:

Battroid Mode: maximum walking speed 160 km/h

Fighter Mode: at 10,000 m Mach 2.71; at 30,000+ m Mach 3.87

g limit: in space +7

Thrust-to-weight ratio: empty 3.47; standard T-O 2.49; maximum T-O 1.24

Design Features:

3-mode variable transformation; variable geometry wing; vertical take-off and landing; control-configurable vehicle; single-axis thrust vectoring; three "magic hand" manipulators for maintenance use; retractable canopy shield for Battroid mode and atmospheric reentry; option of GBP-1S system, atmospheric-escape booster, or FAST Pack system

Transformation:

Standard time from Fighter to Battroid (automated): under 5 sec.

Min. time from Fighter to Battroid (manual): 0.9 sec.

Armament:

2x internal Mauler RÖV-20 anti-aircraft laser cannon, firing 6,000 pulses per minute

1x Howard GU-11 55 mm three-barrel Gatling gun pod with 200 RPG, fired at 1,200 rds/min

4x underwing hard points for a wide variety of ordnance, including

12x AMM-1 hybrid guided multipurpose missiles (3/point), or

12x MK-82 LDGB conventional bombs (3/point), or

6x RMS-1 large anti-ship reaction missiles (2/outboard point, 1/inboard point), or

4x UUM-7 micro-missile pods (1/point) each carrying 15 x Bifors HMM-01 micro-missiles,

or a combination of above load-outs

The optional Shinnakasu Heavy Industry S-FAST Pack 2.1 augmentative space weapon system added:

6x micro-missiles in two NP-AR-01 micro-missile launcher pods (mounted rear-ward under center ventral section in Fighter mode or on lower arm sections in GERWALK/Battroid mode)

4x12 micro missiles in four HMMP-02 micro-missile launchers, one inside each booster pod

The kit and its assembly:

This VF-1 is another contribution to the “Old Kit” Group Build at whatifmodelers.com, running in late 2016. I am not certain about the moulds’ inception date, but since it is an ARII incarnation of this type of kit and even moulded in the early pastel green styrene, I’d think that it was produced in 1982 or 83.

Anyway, I love the Macross VF-1, IMHO a design masterpiece created by Shoji Kawamori and one of my favorite mecha designs ever, because it was created as a late 70ies style jet fighter that could transform into a robot in a secondary role. As a simple, purposeful military vehicle. And not like a flashy robot toy.

Effectively, this Super Valkyrie is a highly modified OOB kit with many donation parts, and this kit is a bit special, for several reasons. There are several 1:100 OOB kits with FAST Packs from ARII/Bandai available (and still around today), but these are normally only Battroids or Gerwalks with additional parts for the FAST kit conversion. The kit I used here is different: it is, after maybe 25 years of searching and building these kits, the #70 from the original production run. It is (so far!) the only Fighter mode kit with the additional FAST Pack parts! Must be rare, and I have never seen it in catalogues?

Until today, I converted my Super or Strike Valkyries from Gerwalk kits, a task that needs some improvisation esp. around the folded arms between the legs, and there’s no OOB option for an extended landing gear. The latter made this Fighter mode kit very attractive, even though the actual kit is pretty disappointing, and AFAIK this kit variant is only available as a VF-1S.

With the Super Valkyrie fighter kit you receive basically a Gerwalk with a standard fighter cockpit (which includes a front wheel well and an extended front wheel leg), plus extra parts. The leg/engine-mounted NP-FB-01 systems are less bulbous than the parts on the Gerwalk or Battroid kit, and the OOB dorsally mounted NP-BP-01 boosters are TINY, maybe 1:120 or even 1:144! WTF?

Further confusion: the kit includes a set of lower arm parts with integrated rocket launchers, but these are not necessary at all for the Fighter build?! As a kind of compensation there’s a new and exclusive element that simulates the folded arms under the ‘fuselage’ and which, as an added value, properly holds the hand gun under the fuselage. As a quirky flaw, though, the hand gun itself comes in the extended form for the Battroid/Gerwalk mode. For the fighter in flight mode, it has to be modified, but that’s easily done.

Anyway, with the potential option to build a Super Valkyrie with an extended landing gear, this was my route to go with this vintage kit. The Super Valkyrie already looks bulky with the FAST Pack added, but then I recently found the S-FAST Pack option with two more boosters under the wings – total overkill, but unique. And I had a spare pair of booster bulks in the stash (w/o their nozzles, though), as well as a complete pair of additional bigger standard FAST boosters that could replace the ridiculous OOB parts…

Building such a Super/Strike Valkyrie means building separate components, with a marriage of parts as one of the final steps. Consequently, cockpit, central fuselage with the wings and the air intakes, the folded stabilizer pack, the folded arms element with the handgun, the two legs and the four boosters plus other ordnance had to be built and painted separately.

Here and there, details were changed or added, e. g. a different head (a ‘J’ head for the flight leader’s aircraft with two instead of the rare, OOB ‘S’ variant with four laser cannon), covers for the main landing gear (the latter does not come with wells at all, but I did not scratch them since they are hardly recognizable when the kit is sitting on the ground), the typical blade aerials under the cockpit and the feet had to be modified internally to become truly ‘open’ jet exhausts.

The wing-mounted boosters received new nozzles and their front end was re-sculpted with 2C putty into a square shape, according to reference sketches. Not 100% exact, but the rest of the VF-1 isn’t either.

This VF-1 was also supposed to carry external ordnance and my first choice were four wing-mounted RMS-1 Anti-Ship Reaction Warheads, scratched from four 1.000 lb NATO bombs. But, once finished, I was not happy with them. So I looked for another option, and in a source book I found several laser-guided bombs and missiles, also for orbital use, and from this inspiration comes the final ordnance: four rocket-propelled kinetic impact projectiles. These are actually 1:72 JASDF LGB’s from a Hasegawa weapon set, sans aerodynamic steering surfaces and with rocket boosters added to the tail. Also not perfect, but their white color and sleek shape is a good counterpart to the FAST elements.

Experience from many former builds of this mecha kit family helped a lot, since the #70 kit is very basic and nothing really fits well. Even though there are not many major seams or large elements, PSR work was considerable. This is not a pleasant build, rather a fight with a lot of compromises and semi-accuracies.

Seriously, if you want a decent 1:100 VF-1, I’d rather recommend the much more modern WAVE kits (including more realistic proportions).

Painting and markings:

The paint scheme for this Super Valkyrie was settled upon before I considered the S-FAST Pack addition: U.N. Spacy’s SVF-124 is authentic, as well as its unique camouflage paint scheme.

The latter is a special scheme for the lunar environment where the unit was originally formed and based, with all-black undersides, a high, wavy waterline and a light grey upper surface, plus some medium grey trim and a few colorful US Navy style markings and codes.

My core reference is a ‘naked’ bread-and-butter VF-1A of SVF-124 in Fighter mode, depicted as a profile in a VF-1 source book from SoftBank Publishing. The colors for the FAST Pack elements are guesstimates and personal interpretations, though, since I could not find any reference for their look in this unit.

As a side note, another, later SVF-124 aircraft in a similar design is included as an option in a limited edition 1:72 VF-22S kit from Hasegawa, which is backed by CG pics in a VF-22 source book from Softbank, too.

Furthermore, SVF-124 finds mention in a Japanese modeler magazine, where the aforementioned VF-22S kit was presented in 2008. So there must be something behind the ‘Moon Shooters’ squadron.

According to the Hasegawa VF-22S’s painting instructions, the underside becomes black and the upper surfaces are to be painted with FS36270 (with some darker fields on the VF-22, though, similar to the USAF F-15 counter-shaded air superiority scheme, just a tad darker).

Due to the 1:100 scale tininess of my VF-1, I alternatively went for Revell 75 (RAL 7039), which is lighter and also has a brownish hue, so that the resulting aircraft would not look too cold and murky, and not resemble an USAF aircraft.

All FAST Pack elements were painted in a uniform dark grey (Humbrol 32), while some subtle decorative trim on the upper surfaces, e.g. the canopy frame, an anti-glare panel and a stripe behind the cockpit and decoration trim on the wings’ upper surfaces, was added with Revell 77 (RAL 7012). Overall, colors are rather dull, but IMHO very effective in the “landscape” this machine is supposed to operate, and the few colorful markings stand out even more!

The cockpit interior was painted in a bluish grey, with reddish brown seat cushions (late 70ies style!), and the landing gear became all white. For some added detail I painted the wings’ leading edges in a mustard tone (Humbrol 225, Mid Stone).

The kit received some weathering (black ink wash, drybrushing on panels) and extra treatment of the panel lines – even though the FAST Pack elements hide a lot of surface or obscure view.

More color and individuality came with the markings. The standard decals like stencils or the U.N. Spacy insignia come from the kit’s and some other VF-1s’ OOB sheets.

Based on the SVF-124 VF-1 profile and taking the basic design a bit further, I used dull red USAF 45° digits for the 2nd flight leader’s “200” modex and the Apollo Base’s code “MA” on the dorsal boosters. Some discreet red trim was also applied to the FAST Packs – but only a little.

Since all of SVF-124’s aircraft are rumored to carry personal markings, including nose art and similar decorations, I tried to give this VF-1JS a personal note: the pin-up badges on the dorsal boosters come from a Peddinghouse decal sheet for Allied WWII tanks, placed on a silver roundel base. Unfortunately (and not visible before I applied them) the pin-up decal was not printed on a white basis, so that the contrast on the silver is not very strong, but I left it that way. Additionally, the tagline “You’re a$$ next, Jerry” (which IS printed in opaque white…?) was added next to the artwork – but it’s so tiny that you have to get really close to decipher it at all…

Finally, after some soot stains around the exhausts and some vernier nozzels with graphite, the kit received a coat of matt acrylic varnish.

Building this vintage VF-1 kit took a while and a lot of effort, but I like the result: with the S-FAST Pack, the elegant VF-1 turned into a massive space fighter hulk! The normal Super Valkyries already look very compact and purposeful, but this here is truly menacing. Especially when standing on its own feet/landing gear, with its nose-down stance and the small, original wheels, this thing reminds of a Space Shuttle that had just landed.

Good that I recently built a simple VF-1 fighter as a warm-up session. ARII’s kit #70 is not a pleasant build, rather a fight with the elements and coupled with a lot of compromises – if you want a Super Valkyrie Fighter in 1:100, the much more modern WAVE kit is IMHO the better option (and actually not much more pricey than this vintage collector’s item). But for the vintage feeling, this exotic model kit was just the right ticket, and it turned, despite many weaknesses and rather corny details, into an impressive fighter. Esp. the lunar camouflage scheme looks odd, but very unique and purposeful.

Anyway, with so many inherent flaws of the ARII kit, my former method of converting a pure (and much more common) Gerwalk kit into a space-capable VF-1 fighter is not less challenging and complicated than trying to fix this OOB option into a decent model. :-/

Some background:

The VF-1 was developed by Stonewell/Bellcom/Shinnakasu for the U.N. Spacy by using alien Overtechnology obtained from the SDF-1 Macross alien spaceship. Its production was preceded by an aerodynamic proving version of its airframe, the VF-X. Unlike all later VF vehicles, the VF-X (sometimes referred to as VF-X1) was strictly a conventional/non-transformable jet aircraft, even though it incorporated many structural components and several key technologies that were vital for the transformable VF-1’s successful development that ran in parallel. Therefore, the VF-X was never intended as an air superiority fighter, but rather a flight-capable analogue test bed and proof of concept for the VF-1’s basic layout and major components. In this role, however, the VF-X made vital contributions to systems’ development that were later incorporated into the VF-1’s serial production and sped the program up considerably.

The fighter remained active in many second line units and continued to show its worthiness years later, e. g. through Milia Jenius who would use her old VF-1 fighter in defense of the colonization fleet - 35 years after the type's service introduction.

General characteristics:

Accommodation: One pilot in a Marty & Beck Mk-7 zero/zero ejection seat

Length 14.23 meters

Wingspan 14.78 meters (at 20° minimum sweep)

Height 3.84 meters

Empty weight: 13.25 metric tons

Standard T-O mass: 18.5 metric tons

Power Plant:

2x Shinnakasu Heavy Industry/P&W/Roice FF-2001 thermonuclear reaction turbine engines, output 650 MW each, rated at 11,500 kg in standard or in overboost (225.63 kN x 2)

4 x Shinnakasu Heavy Industry NBS-1 high-thrust vernier thrusters (1 x counter reverse vernier thruster nozzle mounted on the side of each leg nacelle/air intake, 1 x wing thruster roll control system on each wingtip);

Performance:

Top speed: Mach 2.71 at 10,000 m; Mach 3.87 at 30,000+ m

Thrust-to-weight ratio: empty 3.47; standard T-O 2.49; maximum T-O 1.24

Armament:

None installed, but the VF-X had 4x underwing hard points for a wide variety of ordnance, plus a ventral hardpoint for a Howard GU-11 55 mm three-barrel Gatling gun pod with 200 RPG, fired at 1,200 rds/min or other stores like test instruments

The model and its assembly:

Another submission to the “Prototypes” group build at whatifmodelers.com in July 2020. Being a VF-1 fan (and have built maybe twenty o these simple Arii kits), adding a VF-X was, more or less, a must – even more so because I had a suitable Valkyrie Fighter kit at hand for the conversion. As a side note, I have actually built something quite similar from a VF-1D many years ago: a fictional, non-transformable advanced trainer, without knowing about the VF-X at all.

Thanks to the “Macross - Perfect Memory” source book, the differences between the transformable VF-1 and its early testbed were easy to identify:

- Fixed legs with faired ducts from the intakes on (thighs)

- Ankle recesses disappeared

- Less and slightly different panel lines on the back and on the nose

- ventral head unit deleted and a respective fairing installed instead

- Levelled underside (shoulder fairings of the folded arms were cut down)

- Leg attachment points on the nose deleted

- No small, circular vernier thrusters all around the hull

- Some new/different venting grills (created mostly with 0.5mm black decal stripes)

Beyond the changes, the VF-1A was basically built OOB. Thankfully, the VF-X already features the later VF-1’s vectored thrust nozzles/feet, so that no changes had to be made in this respect. A pilot figure was added to the cockpit for the beauty pics, and after the flight scenes had been shot, the canopy remained open on a swing arm for static display. For the same reason, the model was built with the landing gear extended.

As a test aircraft, the underwing pylons and their AMM-1 ordnance were left away and the attachment points hidden with putty. I also omitted the ventral gun pod and left the aircraft clean. However, for the flight scene pictures, I implanted an adapter for a display holder made from wire.

In order to emphasize the test vehicle character of the VF-X, I gave the model a scratched spin recovery parachute installation between the fins, using a real world F-22 testbed as benchmark. It consists of styrene profiles, quite a delicate construction. For the same reason I gave the VF-X a long sensor boom on the nose, which changes the Valkyrie’s look, too. Finally, some small blade antennae were added to the nose and to the spine behind the cockpit.

Painting and markings:

To be honest, I have no idea if there was only a single VF-X prototype in the Macross universe, or more. Just one appears in the TV series in episode #33, and lack of suitable information and my personal lack of Japanese language proficiency prevents any deeper research. However, this would not keep me from inventing a personal interpretation of the canonical VF-X, especially because I do not really like the original livery from the TV series: an overall light grey with some simple black trim and “TEST” written on the (fixed) legs. Yamato did an 1:60 scale toy of the VF-X, but it was/is just a VF-1 with a ventral fairing; they added some shading to the basic grey – but this does not make the aircraft more attractive, IMHO.

When I looked at the original conceptual drawing of the VF-X in the “Macross - Perfect Memory” source book, however, I was immediately reminded of the F-15 prototypes from the Seventies (and this program used a total of twelve machines!). These featured originally a light grey (FS 36375?) overall base, to which bright dayglo orange markings on wings, fins and fuselage were soon added – in a very similar pattern to the VF-X. I think the VF-X livery was actually inspired by this, the time frame matches well with the production of the Macross TV series, too, and that’s what I adapted for my model.

In order to come close to the F-15 prototype livery, I gave “my” VF-X an overall basic coat of RAL 7047 “Telegrau 4”, one of German Telekom’s corporate colors and a very pale grey that can easily be mistaken for white when you do not have a contrast reference.

The cockpit received a medium grey finish, the ejection seat became black with brown cushions; the pilot figure is a 1:100 seated passenger from an architecture supplies, painted like an early VF-1 pilot in a white/blue suit. The jet nozzles/feet were painted with Revell 91 (Iron) and later treated with grinded graphite for a more metallic finish. The landing gear became classic white (I used Revell 301, which is a very pure tone, as contrast to the RAL 7047 on the hull), the air intake ducts and the internal sections of the VG wings were painted with dark grey (Revell 77).

For some diversity I took inspiration from the Yamato VF-X toy and added slightly darker (Humbrol 166, RAF Light Aircraft Grey) areas to the hull and the legs. Next, the panel lines were emphasized through a thinned black ink wash, but I did no panel post shading so that the VF-X would not look too dirty or worn.

Onto this basis I applied the orange dayglo markings. On the wings and fins, these were painted – they were applied with spray paint from a rattle can, involving lots of masking. The leading edges on wings and fins were created with grey decal sheet material, too. At this stage, some surface details and more fake panel lines were added with a soft pencil.

The orange cheatline under the cockpit is a personal addition; I found that some more orange had to be added to the nose for visual balance, and I eventually went for the simple, trimmed stripe (TL Modellbau material) instead of trying to apply decal sheet material around the jagged air intakes (F-15 prototype style). The black “TEST”, “VFX” and “U.N. Spacy” markings were designed at the computer and printed on clear inkjet decal paper. Even though the “real” VF-X does not feature the UNS “kite” insignia, I decided to add them to the model. These come from the OOB sheet, which also provided most (slightly yellowed) stencils.

Finally, the model was sealed with a coat of matt acrylic varnish (Italeri).

A rather different VF-1 project (and it is – to my astonishment – #28 in my 1:100 VF-1 Fighter mode collection!!!), with more changes to the basic model kit than one might expect at first sight. VF-X and VF-1 differ considerably from each other, despite identical outlines! However, I like the outcome, and I think that going a different route from the canonical grey/black livery paid out, the bright orange markings really make this VF-X stand out, and it looks IMHO more like a testbed than the “real” aircraft from the TV series.

Some background:

The VF-1 was developed by Stonewell/Bellcom/Shinnakasu for the U.N. Spacy by using alien Overtechnology obtained from the SDF-1 Macross alien spaceship. It was preceded into production by an aerodynamic proving version of its airframe, the VF-X. Unlike all later VF vehicles, the VF-X was strictly a jet aircraft, built to demonstrate that a jet fighter with the features necessary to convert to Battroid mode was aerodynamically feasible.

However, the fighter remained active in many second line units and continued to show its worthiness years later, e. g. through Milia Jenius who would use her old VF-1 fighter in defense of the colonization fleet - 35 years after the type's service introduction!

General characteristics:

Equipment Type: all-environment variable fighter and tactical combat battroid

Government: U.N. Spacy, U.N. Navy, U.N. Space Air Force

Accommodation: pilot only in Marty & Beck Mk-7 zero/zero ejection seat

Dimensions:

Fighter Mode:

Length 14.23 meters

Wingspan 14.78 meters (fully extended)

Height 3.84 meters

Battroid Mode:

Height 12.68 meters

Width 7.3 meters

Length 4.0 meters

Empty weight: 13.25 metric tons;

Standard T-O mass: 18.5 metric tons;

MTOW: 37.0 metric tons

Powerplant:

2x Shinnakasu Heavy Industry/P&W/Roice FF-2008 thermonuclear reaction turbine engines, output 650 MW each, rated at 11,500 kg in standard or in overboost (225.63 kN x 2)

4 x Shinnakasu Heavy Industry NBS-1 high-thrust vernier thrusters (1 x counter reverse vernier thruster nozzle mounted on the side of each leg nacelle/air intake, 1 x wing thruster roll control system on each wingtip);

18 x P&W LHP04 low-thrust vernier thrusters beneath multipurpose hook/handles

Performance:

Battroid Mode: maximum walking speed 160 km/h

Fighter Mode: at 10,000 m Mach 2.71; at 30,000+ m Mach 3.87

g limit: in space +7

Thrust-to-weight ratio: empty 3.47; standard T-O 2.49; maximum T-O 1.24

Design features:

3-mode variable transformation; variable geometry wing; vertical take-off and landing; control-configurable vehicle; single-axis thrust vectoring; three "magic hand" manipulators for maintenance use; retractable canopy shield for Battroid mode and atmospheric reentry; option of GBP-1S system, atmospheric-escape booster, or FAST Pack system

Transformation:

Standard time from Fighter to Battroid (automated): under 5 sec.

Minimum time from Fighter to Battroid (manual): 0.9 sec.

Armament:

2x internal Mauler RÖV-20 anti-aircraft laser cannon, firing 6,000 pulses per minute

1x Howard GU-11 55 mm three-barrel Gatling gun pod with 200 rds fired at 1,200 rds/min

4 x underwing hard points for a wide variety of ordnance, including

- 12x AMM-1 hybrid guided multipurpose missiles (3/point), or

- 12x MK-82 LDGB conventional bombs (3/point), or

- 6x RMS-1 large anti-ship reaction missiles (2/outboard point, 1/inboard point), or

- 4x UUM-7 micro-missile pods (1/point), each carrying 15x Bifors HMM-01 micro-missiles,

or a combination of above load-outs

Optional Armament:

Shinnakasu Heavy Industry GBP-1S ground-combat protector weapon system, or

Shinnakasu Heavy Industry FAST Pack augmentative space weapon system

The kit and its assembly:

The second vintage 1:100 ARII VF-1 as a part of a Zentraedi squadron series, the canonical SVF-789. This one was inspired by a profile of such a machine in the “Macross Variable Fighter Master File: VF-1 Valkyrie Part 1” Art Book – true robot porn and full of valuable detail and background material for anyone who’d consider building a VF-1.

The SVF-789 machine shown in the book is a simple VF-1A, but with Zentraedi language markings and in a rather unusual livery in all dark green, yellow and black trim and grey low-viz roundels. While this does IMHO not really look sexy, I found the idea of a squadron, manned by former (alien) enemies very interesting. And so I took up the idea and started fleshing it out – including the idea of SVF-789’s initial base deep in the Amazonian jungle (justifying somehow the all-green livery!?).

This second build was to represent a flight leader’s aircraft, and consequently the basis is a VF-1J kit (which only differs outwardly through the head). In order to set the machine a little more apart I decided to incorporate some “Plus” program updates, including a different nose tip for the updated radar and two small fairings for IRST and laser designator sensors above and below the nose section, respectively. The fins’ tips were also modified – they were elongated a little through styrene sheet replacements.

This update is a bit early for the official Macross timeline, but I just wanted more than a standard J Valkyrie in a more exotic paint scheme.

Otherwise, this VF-1J fighter kit was built OOB, with the landing gear tucked up and the usual additions of some blade antennae, a pilot figure and a custom display stand in/under the ventral cannon pod.

The ordnance is non-standard, though; in this case the aircraft received two pairs of air-to-ground missiles (actually some misshapen Soviet AAMs from the Academy MiG-23 kit – either very fat R-60 ‘Aphid’ AAMs or very poor renditions of vintage K-6 ‘Alkali’ missiles?) inboards and four AMM-1 missiles on the outer pylons, with the lowest missile replaced by scratched ECM and chaff dispenser pods. The gun pod was also modified with a new nozzle, with parts from a surplus AMM-1 missile – also inspired by a source book entry.

Painting and markings:

This was planned to be a more exotic or extravagant interpretation of the profile from the book, which was already used as a guideline for the VF-1A build. The overall design of an all-green livery with a white nose tip as basis was kept, together with yellow trim on wings, fins and the stabilizer fins on the Valkyrie’s legs. The VF-1A already deviated from this slightly, but now I wanted something more outstanding – a bold flight leader’s mount.

Zentraedi vehicles tend to be rather colorful, so the tones I chose for painting were rather bright. For instance, the initial idea for the green was FS 34079, a tone which also comes close to the printed profile in the book. But it looked IMHO too militaristic, or too little anime-esque, so I eventually settled for something brighter and used Humbrol 195 (called Dark Satin Green, but it’s actually RAL 6020, Chromoxyd Grün, a color used on German railway wagons during and after WWII), later shaded with black ink for the engravings and Humbrol 76 (Uniform Green) for highlights.

The nose became pure white, the leading edge trim was painted with Revell 310 (Lufthansa Gelb, RAL 1028), a deep and rich tone that stands out well from the murky green.

In order to set this J Valkyrie apart from the all-dark green basic VF-1As, I added two bright green tones and a light purple as flight color: Humbrol 36 (called Pastel Green, but it’s actually very yellow-ish), 38 (Lime) and Napoleonic Violet from ModelMaster’s Authentic Line, respectively. 36 was applied to the lower legs and around the cockpit section, including the spinal fairing with the air brake. The slightly darker 38 was used on the wings and fins as well as for the fuselage’s and wings’ underside. On top of the wings and the inner and outer fins, the surfaces were segmented, with the dark green as basic color.

As an additional contrast, the head, shoulder guards and additional trim highlights on the legs as well as for a double chevron on the breast plate were painted in the pale purple tone. A sick color combination, but very Zentraedi/Meltraedi-esque!

The cockpit interior was, according to Macross references, painted in Dark Gull Grey. The seat received brown cushions and the pilot figure was turned into a micronized Meltraedi (yes, the fictional pilot Taqisha T’saqeel is to be female) with a colorful jumpsuit in violet and white, plus a white and red helmet – and bright green skin! The gun pod became dark blue (Humbrol 112, Field Blue), the AMM-1 missiles received a pale grey livery while the air-to-ground missiles and the chaff dispenser became olive drab. As an additional contrast, the ECM pod became white. A wild mix of colors!

This was even enhanced through U.N. Spacy roundels in standard full color – their red really stands out. The squadron emblem/symbol on the fin was painted with a brush, but in this case in a smaller variant and with two USN/USAF style code letters for the home basis added.

Since I can not print white letters onto clear decal sheet at home, the aircraft’s tactical code ‘300’ was created with letters from the human alphabet. A simplification and deviation from the original concept, but I found the only alternative of painting tiny and delicate Zentraedi codes by brush and hand just to be too risky.

Finally, the kit was sealed with a sheen acrylic varnish – with the many, contrasting colors a pure matt finish somehow did not appear right.

Building was relatively simple, just the rhinoplasty was a little tricky – a very subtle modification, though, but the pointed and slightly deeper nose changed the VF-1’s look. The standard Zentraedi-style VF-1 of SVF-789 already looked …different, but this one is … bright, if not challenging to the naked eye. Anyway, there’s more in the creative pipeline from the Zentraedi unit – this aircraft’s pilot in the form of a modified resin garage kit.

Some background:

The VF-1 was developed by Stonewell/Bellcom/Shinnakasu for the U.N. Spacy by using alien Overtechnology obtained from the SDF-1 Macross alien spaceship. It was preceded into production by an aerodynamic proving version of its airframe, the VF-X. Unlike all later VF vehicles, the VF-X was strictly a jet aircraft, built to demonstrate that a jet fighter with the features necessary to convert to Battroid mode was aerodynamically feasible.

However, the fighter remained active in many second line units and continued to show its worthiness years later, e. g. through Milia Jenius who would use her old VF-1 fighter in defense of the colonization fleet - 35 years after the type's service introduction!

General characteristics:

Equipment Type: all-environment variable fighter and tactical combat battroid

Government: U.N. Spacy, U.N. Navy, U.N. Space Air Force

Accommodation: pilot only in Marty & Beck Mk-7 zero/zero ejection seat

Dimensions:

Fighter Mode:

- Length 14.23 meters

- Wingspan 14.78 meters (fully extended)

- Height 3.84 meters

Battroid Mode:

- Height 12.68 meters

- Width 7.3 meters

- Length 4.0 meters

Empty weight: 13.25 metric tons

Standard T-O mass: 18.5 metric tons

MTOW: 37.0 metric tons

Powerplant:

2x Shinnakasu Heavy Industry/P&W/Roice FF-2008 thermonuclear reaction turbine engines,

output 650 MW each, rated at 11,500 kg in standard or in overboost (225.63 kN x 2)

4x Shinnakasu Heavy Industry NBS-1 high-thrust vernier thrusters (1 x counter reverse

vernier thruster nozzle mounted on the side of each leg nacelle/air intake,

1x wing thruster roll control system on each wingtip)

18x P&W LHP04 low-thrust vernier thrusters beneath multipurpose hook/handles

Performance:

Battroid Mode: maximum walking speed 160 km/h

Fighter Mode: at 10,000 m Mach 2.71; at 30,000+ m Mach 3.87

g limit: in space +7

Thrust-to-weight ratio: empty 3.47; standard T-O 2.49; maximum T-O 1.24

Design features:

3-mode variable transformation; variable geometry wing; vertical take-off and landing; control-configurable vehicle; single-axis thrust vectoring; three "magic hand" manipulators for maintenance use; retractable canopy shield for Battroid mode and atmospheric reentry; option of GBP-1S system, atmospheric-escape booster, or FAST Pack system

Transformation:

Standard time from Fighter to Battroid (automated): under 5 sec.

Minimum time from Fighter to Battroid (manual): 0.9 sec.

Armament:

1x internal Mauler RÖV-20 anti-aircraft laser cannon, firing 6,000 pulses per minute

1x Howard GU-11 55 mm three-barrel Gatling gun pod with 200 rds fired at 1,200 rds/min

4x underwing hard points for a wide variety of ordnance, including

- 12x AMM-1 hybrid guided multipurpose missiles (3/point), or

- 12x MK-82 LDGB conventional bombs (3/point), or

- 6x RMS-1 large anti-ship reaction missiles (2/outboard point, 1/inboard point), or

- 4x UUM-7 micro-missile pods (1/point), each carrying 15x Bifors HMM-01 micro-missiles,

or a combination of above load-outs

Optional Armament:

Shinnakasu Heavy Industry GBP-1S ground-combat protector weapon system, or

Shinnakasu Heavy Industry FAST Pack augmentative space weapon system

The kit and its assembly:

Another submission to the 2017 "Science Fiction" Group Build at whatifmodelers.com, and once more the eventual realization of a long- plan: a VF-1 in a dazzle scheme! To my surprise, I have never seen this, neither in the canonical sources (except for a VF-5000 with an all-grey splinter scheme, similar to the experimental US Keith Ferris schemes), nor on a model? Well, time to try this stunt ...again; I had actually built a VF-1D as a non-transformable supersonic trainer many years ago, and applied a livery inspired by the Keith Ferris schemes, but with very soft blue-grey tones, so that the disruptive effect of the underlying splinter would hardly "work". So, this is a second approach to the theme, and a more visually-oriented one.

This vintage ARII VF-1J fighter kit was built OOB, with the landing gear tucked up. This kit showed its age, though, the moulds seem to be well worn because the sprues showed considerable flash and other soft spots.

Anyway, the model received my usual additions of some blade antennae, a pilot figure and a custom display stand in/under the ventral cannon pod. The ordnance is standard, too, the full load of a dozen AAM-1 missiles is OOB. The only true additions are a small, scratched fairing for an IRST sensor under the nose, seen in a source book profile of an U.N.S.A.F. VF-1, and RHAWS antennae at the top of the fins.

Painting and markings:

This was the bigger part of the work, and a creative one, too. I did not simply want to copy an existing scheme, e .g. the Keith Ferris schemes that had been tested on some US aircraft.

The scheme was to be disruptive, confusing and also decorative - true camouflage was rather a secondary requirement, but welcome. Creating such a scheme from scratch is not as easy as it sounds, because you have to avoid collisions of the same color, the overall look needs some balance, and the scheme and its single shard shapes were to somewhat correspond with the Valkyrie’s outlines, too.

Since I did not dare to improvise this directly on the kit, and because I wanted to use more than three tones for the paint scheme, I actually created a VF-1 4-side view on a sheet of paper and started painting it out with colored pencils!

This was actually very helpful and I ended up with a four-tone scheme, rooted in pure black and white and somewhat inspired by pre-WWII dazzle schemes for ships.

Consequently the tones are black (I used a tone called Tar Black, Revell 6, which is actually a very dark grey), a dark/medium grey (Humbrol 27), light grey (Humbrol 64) and white (again, not the pure tone, but rather a very light grey, mixed from 95% Humbrol 130 and 5% Humbrol 64).

The pattern consists of large color sections, geometrical shapes, wedges and a few stripes at some intersections. It (unintentionally) reminds of certain late Su-27 schemes in Russian services, as well as US aggressors that carry similar outfits, e. g. some F-18s of USN’s VFC-12. But these are rather geometrical shapes added to a camouflage/grey background, and not as integral as my design.

The scheme was applied mostly free-handedly with brushes and a mix of enamels and acrylic paint. From certain angles it actually breaks up the VF-1's outlines well, esp. its silhouette, and at a quick glance it is actually hard to tell the Valkyrie’s orientation or direction of flight. In order to add some more onlooker confusion, I also added a fake cockpit with a white pilot helmet (cut from decal sheet) on top of the fuselage.

All other markings are rather minimal and subdued. Lacking different contrasting color options, I used yellow decals for the “U.N. Spacy” tags on the legs and the upper starboard wing. The “kite” insignia in grey and white were printed at home, while the tactical code comes from a Tamiya 1:100 Thunderchief. The chequered stripe on top of the fin is a generic decal, and blank, beige decal sheet was used for the wings’ and fins’ leading edges.

The rest came mostly from various OOB VF-1 sheets.

The ordnance was painted authentically, too. The AMM-1’s became all-white with black and red trim, the gun pod was painted Dark Sea Grey (Humbrol 123), blending into the overall color palette of this dazzle VF-1.

Except for a black ink wash, emphasizing the engraved panel lines, not much other weathering was done. Finally, the kit was sealed with matt acrylic varnish.

An… interesting result, and I am surprised how much the dazzle scheme changes the overall look of the VF-1, despite no fundamental changes to the airframe as such. Building was relatively simple, but the kit is not complex – just pretty old. Anyway, this updated aggressor bird makes a nice addition to the VF-1 collection, a worthwhile effort. A true eye catcher, I’d say.

La versione da gara al debutto nel 1985 aveva 480 cv, mentre l'ultima evoluzione schierata nel campionato mondiale 1986 poteva sviluppare per brevi tratti anche 650 CV con una pressione di sovralimentazione di 2,5 bar tramite un overboost regolabile dall'abitacolo.

Some background:

The VF-1 was developed by Stonewell/Bellcom/Shinnakasu for the U.N. Spacy by using alien Overtechnology obtained from the SDF-1 Macross alien spaceship. Its production was preceded by an aerodynamic proving version of its airframe, the VF-X. Unlike all later VF vehicles, the VF-X was strictly a jet aircraft, built to demonstrate that a jet fighter with the features necessary to convert to Battroid mode was aerodynamically feasible. After the VF-X's testing was finished, an advanced concept atmospheric-only prototype, the VF-0 Phoenix, was flight-tested from 2005 to 2007 and briefly served as an active-duty fighter from 2007 to the VF-1's rollout in late 2008, while the bugs were being worked out of the full-up VF-1 prototype (VF-X-1).

However, the fighter remained active in many second line units and continued to show its worthiness years later, e. g. through Milia Jenius who would use her old VF-1 fighter in defense of the colonization fleet - 35 years after the type's service introduction!

General characteristics:

All-environment variable fighter and tactical combat Battroid,

used by U.N. Spacy, U.N. Navy, U.N. Space Air Force and U.N. Spacy Marines

Accommodation:

Single pilot in Marty & Beck Mk-7 zero/zero ejection seat

Dimensions:

Fighter Mode:

Length 14.23 meters

Wingspan 14.78 meters (at 20° minimum sweep)/8.30 meters (at 70° maximum sweep)

Height 3.84 meters

Battroid Mode:

Height 12.68 meters

Width 7.3 meters

Length 4.0 meters

Empty weight: 13.25 metric tons

Standard T-O mass: 18.5 metric tons

MTOW: 37.0 metric tons

Powerplant:

2x Shinnakasu Heavy Industry/P&W/Roice FF-2001 thermonuclear reaction turbine engines, output 650 MW each, rated at 11,500 kg in standard or in overboost (225.63 kN x 2)

4x Shinnakasu Heavy Industry NBS-1 high-thrust vernier thrusters (1x counter reverse vernier thruster nozzle mounted on the side of each leg nacelle/air intake, 1x wing thruster roll control system on each wingtip)

18x P&W LHP04 low-thrust vernier thrusters beneath multipurpose hook/handles

Performance:

Battroid Mode: maximum walking speed 160 km/h

Fighter Mode: at 10,000 m Mach 2.71; at 30,000+ m Mach 3.87

g limit: in space +7

Thrust-to-weight ratio: empty 3.47; standard T-O 2.49; maximum T-O 1.24

Design Features:

3-mode variable transformation; variable geometry wing; vertical take-off and landing; control-configurable vehicle; single-axis thrust vectoring; three "magic hand" manipulators for maintenance use; retractable canopy shield for Battroid mode and atmospheric reentry; option of GBP-1S system, atmospheric-escape booster, or FAST Pack system

Transformation:

Standard time from Fighter to Battroid (automated): under 5 sec.

Min. time from Fighter to Battroid (manual): 0.9 sec.

Armament:

2x internal Mauler RÖV-20 anti-aircraft laser cannon, firing 6,000 pulses per minute

1x Howard GU-11 55 mm three-barrel Gatling gun pod with 200 RPG, fired at 1,200 rds/min

4x underwing hard points for a wide variety of ordnance, including:

- 12x AMM-1 hybrid guided multipurpose missiles (3/point), or

- 12x MK-82 LDGB conventional bombs (3/point), or

- 6x RMS-1 large anti-ship reaction missiles (2/outboard point, 1/inboard point), or

- 4x UUM-7 micro-missile pods (1/point) each carrying 15 x Bifors HMM-01 micro-missiles,

- or a combination of above load-outs

The kit and its assembly:

This build was inspired by a Macross source book find, but the build did not go without a personal twist, and therefore it is not 100% canonical. The VR-1D two seater recce Valkyrie as such is “real”, though, and the basis for the build was a standard 1:100 VF-1D Arii kit. Beyond the standard improvements with extra blade antennae and two pilot figures for in-flight display, I did some other changes in order to get away from the standard VF-1D look.

One of these are the radar sensors on top of the fins - carved from 1.5mm styrene sheet and replacing the original fin tips. On the nose flanks I added flat SLAR antennae, which I extended downwards so that the familiar VF-1 nose would appear quite different (inspired by the Grumman F9F-8P’s outlines). The panels are 0.5mm styrene sheet and blended into the fuselage with putty. In front of the cockpit an IRST sensor was added, actually a simple piece of sprue.

The conformal ECM fairings on the legs were originally drop tank halves (from a Matchbox Saab 29), reduced in depth so far that only shallow bulges remained.

Instead of the GU-11 gun pod under the fuselage I used a camera pod from an 1:72 Luftwaffe Tornado. This is a little massive for the slender 1:100 Valkyrie, but the camera ports and the overall shape and length were just too promising. I cut away the original attachment pylon, reversed the pod, cut off its rounded rear section and added an spherical, clear “eye ball” at the front end (which is actually a ball joint from a vintage Matchbox aircraft display :D).

A vertical styrene tube was used to mount the pod under the Valkyrie, and it is at the same time an adapter for my standard wire display, so that the VR-1D can be presented in flight, with the landing gear tucked up.

Painting and markings:

The paint scheme is based on the rather unique (if not surreal, but effective!) low-level camouflage carried by some of the JASDF's RF-4EJs, operated by the 501st Hikotai (beyond a maritime and a Europe One scheme), as well as the F-1. As far as I could find out, the upper tones are FS 34097, 34108 and 30372, and white from below, while the pattern itself is identical to the Phantom II’s USAF SEA scheme.

The tones I used are Humbrol 168 (Hemp), a mix of 101 (Mid Green) and a little 76 Uniform Green, for a more bluish hue, and a mix of 108 (WWI Green) with some 252 (RLM 82). Instead of white, I rather used a very light grey (Humbrol 147, FS 36495) for the undersides.

Later, after a black ink washing, these basic colors were lightened through panel post-shading with slightly more pale mixes of these tones.

The cockpit was painted in canonical colors, with a medium grey interior, black ejection seats and red brown cushions. The air intakes became dark grey (Revell 77). Since the Valkyrie would be displayed in flight, with the thick and distorting canopy closed, only basic painting was done inside, including the two figures - they just received a basic Macross pilot suit look, but, as a personal twist, the crew received different jumpsuits in red and blue.

The markings were mostly taken from the OOB sheet (with full color kite roundels, making this aircraft look even more JASDF-ish, plus some typical stencils), extras are the 501 Hikotai's famous woodpecker emblem from a Hasegawa 1:72 Phantom II kit and the USN style modex. The dielectric fairings on the nose were created with ivory decal sheet, other antenna covers were painted with Humbrol 7. The exhausts/feet were painted with Modelmaster Titanium Metallizer.

Finally, the kit received an overall coat with matt acrylic varnish (Italeri).

Another VF-1 for the collection, this time a kind of JASDF tribute build – and a mix between canonical and personal elements. However, an interesting result - the "real" JASDF paint scheme looks a little odd, but somehow the camouflage suits the VF-1 well?

:D

I think my new light box is working and all the editing I did was turning up the brightness. Plus I did this in the morning and I actually should be at school right now but I got some weird synergy thing so there are no classes, so I dont ned to go. Yesterday was another synergy thing and I went cause we did lazer tag, rock climbing and we did some martial art stuff so it was super fun.

So yea, new hardsuit with new frame. This isnt the exact standard one although I like it being standard this way. I had this for a couple of weeks and I spent that time playing with it. Then I made it a booster system which I called the overboost system. Which is inspired by the V.O.B from ACFA. So this is a pic with the overboost on and its gunblad and battle rifle.

Sorry about the noise in the pic, I didnt realize until after I upload these pics.

But I already have reached my monthly limit so no more pictures this month. :(

Oh yea, I have been on Flickr for 1 year now. I passed my 1 year a long time ago but it was at the beginning of september and I never got around to doing anything.

Some background:

The VF-1 was developed by Stonewell/Bellcom/Shinnakasu for the U.N. Spacy by using alien Overtechnology obtained from the SDF-1 Macross alien spaceship. It was preceded into production by an aerodynamic proving version of its airframe, the VF-X. Unlike all later VF vehicles, the VF-X was strictly a jet aircraft, built to demonstrate that a jet fighter with the features necessary to convert to Battroid mode was aerodynamically feasible.

However, the fighter remained active in many second line units and continued to show its worthiness years later, e. g. through Milia Jenius who would use her old VF-1 fighter in defense of the colonization fleet - 35 years after the type's service introduction!

Equipment Type: all-environment variable fighter and tactical combat battroid

Government: U.N. Spacy, U.N. Navy, U.N. Space Air Force

Accommodation: pilot only in Marty & Beck Mk-7 zero/zero ejection seat

Dimensions:

Fighter Mode:

Length 14.23 meters

Wingspan 14.78 meters (fully extended)

Height 3.84 meters

Battroid Mode:

Height 12.68 meters

Width 7.3 meters

Length 4.0 meters

Empty weight: 13.25 metric tons;

Standard T-O mass: 18.5 metric tons;

MTOW: 37.0 metric tons

Power Plant:

2x Shinnakasu Heavy Industry/P&W/Roice FF-2001 thermonuclear reaction turbine engines, output 650 MW each, rated at 11,500 kg in standard or in overboost (225.63 kN x 2)

4 x Shinnakasu Heavy Industry NBS-1 high-thrust vernier thrusters (1 x counter reverse vernier thruster nozzle mounted on the side of each leg nacelle/air intake, 1 x wing thruster roll control system on each wingtip);

18 x P&W LHP04 low-thrust vernier thrusters beneath multipurpose hook/handles

Performance:

Battroid Mode: maximum walking speed 160 km/h

Fighter Mode: at 10,000 m Mach 2.71; at 30,000+ m Mach 3.87

g limit: in space +7

Thrust-to-weight ratio: empty 3.47; standard T-O 2.49; maximum T-O 1.24

Design Features: 3-mode variable transformation; variable geometry wing; vertical take-off and landing; control-configurable vehicle; single-axis thrust vectoring; three "magic hand" manipulators for maintenance use; retractable canopy shield for Battroid mode and atmospheric reentry; option of GBP-1S system, atmospheric-escape booster, or FAST Pack system

Transformation:

Standard time from Fighter to Battroid (automated): under 5 sec.

Min time from Fighter to Battroid (manual): 0.9 sec.

Armament:

1 x internal Mauler RÖV-20 anti-aircraft laser cannon, firing 6,000 pulses per minute

1 x Howard GU-11 55 mm three-barrel Gatling gun pod with 200 rds fired at 1,200 rds/min

4 x underwing hard points for a wide variety of ordnance, including

12x AMM-1 hybrid guided multipurpose missiles (3/point), or

12x MK-82 LDGB conventional bombs (3/point), or

6x RMS-1 large anti-ship reaction missiles (2/outboard point, 1/inboard point), or

4x UUM-7 micro-missile pods (1/point) each carrying 15 x Bifors HMM-01 micro-missiles, or a combination of above load-outs

Optional Armament:

Shinnakasu Heavy Industry GBP-1S ground-combat protector weapon system, or

Shinnakasu Heavy Industry FAST Pack augmentative space weapon system

The kit and its assembly:

This is one more 1:100 Bandai VF-1, IMHO a design masterpiece created by Shoji Kawamori and one of my favorite mecha designs ever, because it was created as an late 70ies style jet fighter that could transform into a robot in a secondary role, a simple, purposeful military vehicle.

I’ve built more than a dozen of these kits over the last 25 years, so I know it pretty well, especially its weaknesses. But the small Valkyries, originally manufactured by IMAI and now still on sale through Bandai (they pop up every 5 years when another Macross anniversary occurs…) are simple and easy to modify, and to me a kind of clean canvas for weird and colorful ideas. The VF-1 carries a huge creative potential.

This VF-1A was built almost OOB. I just made some minor mods, partly based on the design benchmark (see below). These include a pilot figure for the cockpit – actually a modified, HO (1:87) scale sitting soldier from Roco Minitanks; 1:100 pilot figures are hard to find, but I found that these squatted figures fill the cockpit and the relatively flat seat pretty well. A few characteristic blade antennae (four under the lower front fuselage and two behind the cockpit) were added.

Since this VF-1A was to be displayed in flight, the landing gear could be omitted and the covers mounted in closed position. The underwing ordnance was omitted and the pylons’ attachment points faired over. The handgun, hanging under the fuselage in flight mode, was replaced by a smoke generator and an associate tank - actually a drop tank from an Airfix 1:72 Saab Viggen. It also holds an adapter for a scratch-built display, which is taller and less obvious than the OOB offering.

Painting and markings:

This is where the actual work took place – and this Canadian VF-1 is a personal interpretation of a fictional custom Valkyrie profiles by CrazyCanuck, posted at macross.net in the fan art section (check

www.macross2.net/m3/forfansonly/crazycanuck/layouts-snowb... for reference).

There’s hardly a livery that does not suit the elegant VF-1, and I found the Snowbirds scheme very pleasing. I also liked the idea that the VF-1 would be used all over the world, with national adaptations like a Royal Navy(!) variant backed by official publications and source books. So, why not a Canadian Valkyrie?

For easy painting the kit was built in separate section (cockpit, fuselage with wings and butterfly tail, legs, head and the smoke generator), and the use of white AND red –together with yellow IMHO the most challenging tone to work with on models – scared me.

Due to the kit’s tininess I painted everything by brush with enamels. The basic tones are Humbrol 130 and 19, the latter turned out to be a very good representation of the Snowbirds’ deep scarlet red tone.

The cheatline all long the VF-1, literally from nose to feet, was created with decals. Most come from an 1:72 Snowbirds CL-141 Tutor sheet from Victoria productions in Canada (excellent stuff!), part of the trim had to be improvised and extended with generic blue and white decal sheet.

In contrast to the CrazyCanuck illustration, I decided to add Macross insignia instead of Canadian roundels – keeping in line with similar “nationalized” VF-1s in official source books. Some Canadian symbols like the flags on the fins, the roundels in the round depressions at the ankles and the huge Canadian flag on the starboard wing (a personal addition, the maple leaf is a decal while the rest was done with paint) were adopted, though, and they suit the Valkyrie well.

After basis painting was done I followed the engraved panel lines with a fine, very soft pencil. An experiment, because I just wanted a subtle emphasis esp. on the white surfaces, not the 2D/comic-style full black panel lines of former builds.

No other weathering was done, since this VF-1 was to look clean and bright. Finally, everything was sealed with a coat of gloss acrylic varnish, and the characteristic clear parts (visor on the head, position lights on the legs, laser muzzles, position lights) were laid out with acrylic silver and filled out with various shades of clear paint. Just small things, but they enhance the overall impression of the simple model kit a lot.

After a long time it’s a good feeling to build an VF-1 again, and creating a rather bright one was fun, even though the paint job was challenging. But patience and clever improvisation paid out: that Snowbird really stands out, the Snowbirds livery suits the VF-1 well! :-D

Some background:

The VF-1 was developed by Stonewell/Bellcom/Shinnakasu for the U.N. Spacy by using alien Overtechnology obtained from the SDF-1 Macross alien spaceship. Its production was preceded by an aerodynamic proving version of its airframe, the VF-X. Unlike all later VF vehicles, the VF-X was strictly a jet aircraft, built to demonstrate that a jet fighter with the features necessary to convert to Battroid mode was aerodynamically feasible. After the VF-X's testing was finished, an advanced concept atmospheric-only prototype, the VF-0 Phoenix, was flight-tested from 2005 to 2007 and briefly served as an active-duty fighter from 2007 to the VF-1's rollout in late 2008, while the bugs were being worked out of the full-up VF-1 prototype (VF-X-1).

However, the fighter remained active in many second line units and continued to show its worthiness years later, e. g. through Milia Jenius who would use her old VF-1 fighter in defense of the colonization fleet - 35 years after the type's service introduction!

General characteristics:

All-environment variable fighter and tactical combat Battroid,

used by U.N. Spacy, U.N. Navy, U.N. Space Air Force and U.N.Spacy Marines

Accommodation:

Single pilot in Marty & Beck Mk-7 zero/zero ejection seat

Dimensions:

Fighter Mode:

Length 14.23 meters

Wingspan 14.78 meters (at 20° minimum sweep)

Height 3.84 meters

Battroid Mode:

Height 12.68 meters

Width 7.3 meters

Length 4.0 meters

Empty weight: 13.25 metric tons;

Standard T-O mass: 18.5 metric tons;

MTOW: 37.0 metric tons

Power Plant:

2x Shinnakasu Heavy Industry/P&W/Roice FF-2001 thermonuclear reaction turbine engines, output 650 MW each, rated at 11,500 kg in standard or in overboost (225.63 kN x 2)

4x Shinnakasu Heavy Industry NBS-1 high-thrust vernier thrusters (1x counter reverse vernier thruster nozzle mounted on the side of each leg nacelle/air intake, 1x wing thruster roll control system on each wingtip);

18x P&W LHP04 low-thrust vernier thrusters beneath multipurpose hook/handles

Performance:

Battroid Mode: maximum walking speed 160 km/h

Fighter Mode: at 10,000 m Mach 2.71; at 30,000+ m Mach 3.87

g limit: in space +7

Thrust-to-weight ratio: empty 3.47; standard T-O 2.49; maximum T-O 1.24

Design Features:

3-mode variable transformation; variable geometry wing; vertical take-off and landing; control-configurable vehicle; single-axis thrust vectoring; three "magic hand" manipulators for maintenance use; retractable canopy shield for Battroid mode and atmospheric reentry; option of GBP-1S system, atmospheric-escape booster, or FAST Pack system

Transformation:

Standard time from Fighter to Battroid (automated): under 5 sec.

Min. time from Fighter to Battroid (manual): 0.9 sec.

Armament:

2x internal Mauler RÖV-20 anti-aircraft laser cannon, firing 6,000 pulses per minute

1x Howard GU-11 55 mm three-barrel Gatling gun pod with 200 RPG, fired at 1,200 rds/min

4x underwing and 2x underfuselage hard points for a wide variety of ordnance, including:

- 12x AMM-1 hybrid guided multipurpose missiles (3/point), or

- 12x MK-82 LDGB conventional bombs (3/point), or

- 6x RMS-1 large anti-ship reaction missiles (2/outboard point, 1/inboard point), or

- 4x UUM-7 micro-missile pods (1/point) each carrying 15 x Bifors HMM-01 micro-missiles,

- or a combination of above load-outs

The kit and its assembly:

Another build of one of these vintage ARII kits, primarily for the (fictional) livery. This one was inspired by a profile found in a source book (the "VF-1 Master File" from Softbank Publishing), where I found a profile of a late VF-1P from 2024 in a pale, three-tone desert paint scheme, similar to an IDF aircraft, with some white trim on the wings and a white radome. While this machine basically looked attractive, I was a little confused by its supposed operation theatre: Australia. There, over a typical outback landscape, the paint scheme would IMHO hardly work, the tones being much too light and just "wrong". From this, the idea was born to create a "Valkyroo"!

Since the model would rather center around the paint scheme, the VF-1, an “S” variant kit, remained basically OOB. Nevertheless, it received some standard mods and some extras. The basic updates include some additional blade antennae (leaving out the dorsal antennae for a Block 13/14 aircraft), a pilot figure and a modified dashboard. This time the VF-1 would have its landing gear extended, but the ventral gun pod was nevertheless modified to accept one of my home-made VF-1 standard display stands for in-flight beauty pics over the Australian desert.

Since the machine would, in its wraparound paint scheme, rather look like a low-level fighter bomber and mud mover, the ordnance was changed from a dozen AMM-1 air-to-air missiles to something grittier. I gave the kit a pair of GBUs on the inner wing stations, which are Paveway bombs from an 1:72 Hasegawa ordnance set, but modified into optically-guided weapons since the original laser sensor with its ring-shaped stabilizer would be quite large at 1:100.

On the outer pylons the VF-1 received four streamlined pods with unguided missiles, left over from KP MiG-21s which are pretty small and slender for their 1:72 scale. Under the 1:100 VF-1 they work well.

I furthermore gave it another pair of hardpoints under the air intakes, holding an ECM and a FLIR pod (both from a Dragon 1:144 RAF Tornado GR.1, the FLIR is a reversed chaff dispenser w/o fins). That’s not canonical, but this one here is fictional, anyway.

On the legs, small chaff/flare dispensers made from styrene strips were added, and small radar warning fairings adorn the nose and the tail. Thin styrene profile strips were added on the legs and the fins, for a little more external structure, and a small laser range finder fairing was mounted under the VF-1’s nose (also from the 1:144 Tonka).

In order to emphasize this Valkyrie's updated and modified status, I modified the horribly misshaped “S” head unit, lowering and narrowing the cranium’s rear part and reducing the number of lasers from four to just two. For the in-flight pictures a pilot figure was added to the cockpit, which also had the dashboard extended downwards to the console between the pilot’s feet.

Painting and markings:

The goal was to apply an effective (and potentially) attractive paint scheme that would be appropriate for the Australian desert/outback landscape, with its distinct red sand, low, pale shrubs and occasional dark rocks and trees. I checked both RAAF schemes as well as landscape pictures, and eventually created a four-tone wraparound scheme, somewhat inspired by unique RAAF DHC-4s and Pilatus Porter transporter liveries, as well as the SAC bomber scheme that was/is used on RAAF C-130. The US Army MERCD scheme also has some influence. However, the result is not a copy of an existing scheme, the scheme rather evolved gradually – even though, once it was done, it somewhat reminds of the famous Swedish “Fields & Meadows” pattern, just with lighter colors, even though this was not intended!

Due to the model’s small size and the potentially bright Australian theatre of operation, I did not want the disruptive scheme to become too dark. Consequently, the wraparound scheme consists of four tones: splotches of Brown Yellow (Humbrol 94) and IJN Grey Green (Tamiya XF-76), two tones with similar brightness, are the basis. Next came a medium red brown (Leather, Humbrol 62) and finally some Bronze Green (Humbrol 75), the latter intended to break up the aircraft's silhouette through a strong color contrast.

For a subtle counter-shading effect against the sky, relatively more of the Sand and IJN Grey Green was used on the undersides and the dark green was not applied underneath at all. The radome, in order to set it slightly apart from the rest of the airframe, as well as some other dielectric fairings, were painted with Hemp (Humbrol 168).

The cockpit became standard medium grey (Humbrol 140) with a brown seat. The landing gear was painted in classic white, while the air intakes and some other openings were painted in dark grey (Revell 77).

In an attempt to further subdue the aircraft's overall visual profile, I avoided any flashy trim and rather went for monochrome markings in black. The low-viz U.N. Spacy “kite” roundels were created and printed at home. The eagle emblems on the fins belong, in real life, to an F-15E prototype (Italeri kit), the tactical codes were puzzled together from A-10 and T-4 decal sheets. Most characteristic VF-1 stencils come from the OOB sheet, some lines were created with generic decal material.

Due to the model’s small size, only some light, overall dry-brushing with hemp and light grey was done, and then the kit was finally sealed with matt acrylic varnish (Italeri).

A camouflaged VF-1 surely looks odd, esp. in desert colors, but there actually are several canonical aircraft painted in such a fashion, to be found in various official Macross publications - in fact, this model is the attempt to create a more plausible livery than one that I found in such a sourcebook. IMHO, the home-brew disruptive four-tone scheme for this "Valkyroo" VF-1 looks quite attractive, and thanks to the selected tones it also makes the subtle Australia connection. Those small Valkyrie kits never get boring, at least to me! :D

Some background:

The VF-1 was developed by Stonewell/Bellcom/Shinnakasu for the U.N. Spacy by using alien Overtechnology obtained from the SDF-1 Macross alien spaceship. Its production was preceded by an aerodynamic proving version of its airframe, the VF-X. Unlike all later VF vehicles, the VF-X was strictly a jet aircraft, built to demonstrate that a jet fighter with the features necessary to convert to Battroid mode was aerodynamically feasible. After the VF-X's testing was finished, an advanced concept atmospheric-only prototype, the VF-0 Phoenix, was flight-tested from 2005 to 2007 and briefly served as an active-duty fighter from 2007 to the VF-1's rollout in late 2008, while the bugs were being worked out of the full-up VF-1 prototype (VF-X-1).

This particular fighter sported the squadron’s typical striped high visibility markings over a standard gloss light gray base on wings and legs, but unlike normal machines of this unit, with deep yellow and black markings, was, together with two sister ships, assigned to the unit’s staff flight. Each of these VF-1’s carried the unit markings and additional flight leader decoration on the noses in non-regular colors: turquoise on “001”, violet on “002” and pink on “003” – giving them one of the most distinctive and attractive paint schemes during the Space War.

General characteristics:

All-environment variable fighter and tactical combat Battroid,

used by U.N. Spacy, U.N. Navy, U.N. Space Air Force

Accommodation:

Pilot only in Marty & Beck Mk-7 zero/zero ejection seat

Dimensions:

Fighter Mode:

Length 14.23 meters

Wingspan 14.78 meters (at 20° minimum sweep)

Height 3.84 meters

Battroid Mode:

Height 12.68 meters

Width 7.3 meters

Length 4.0 meters

Empty weight: 13.25 metric tons;

Standard T-O mass: 18.5 metric tons;

MTOW: 37.0 metric tons

Power Plant:

2x Shinnakasu Heavy Industry/P&W/Roice FF-2001 thermonuclear reaction turbine engines, output 650 MW each, rated at 11,500 kg in standard or in overboost (225.63 kN x 2)

4x Shinnakasu Heavy Industry NBS-1 high-thrust vernier thrusters (1 x counter reverse vernier thruster nozzle mounted on the side of each leg nacelle/air intake, 1 x wing thruster roll control system on each wingtip);

18x P&W LHP04 low-thrust vernier thrusters beneath multipurpose hook/handles

Performance:

Battroid Mode: maximum walking speed 160 km/h

Fighter Mode: at 10,000 m Mach 2.71; at 30,000+ m Mach 3.87

g limit: in space +7

Thrust-to-weight ratio: empty 3.47; standard T-O 2.49; maximum T-O 1.24

Design Features:

3-mode variable transformation; variable geometry wing; vertical take-off and landing; control-configurable vehicle; single-axis thrust vectoring; three "magic hand" manipulators for maintenance use; retractable canopy shield for Battroid mode and atmospheric reentry; option of GBP-1S system, atmospheric-escape booster, or FAST Pack system

Transformation:

Standard time from Fighter to Battroid (automated): under 5 sec.

Min. time from Fighter to Battroid (manual): 0.9 sec.

Armament:

1x internal Mauler RÖV-20 anti-aircraft laser cannon, firing 6,000 pulses per minute

1x Howard GU-11 55 mm three-barrel Gatling gun pod with 200 RPG, fired at 1,200 rds/min

4x underwing hard points for a wide variety of ordnance, including

12x AMM-1 hybrid guided multipurpose missiles (3/point), or

12x MK-82 LDGB conventional bombs (3/point), or

6x RMS-1 large anti-spaceship reaction missiles (2/outboard point, 1/inboard point), or

4x UUM-7 micro-missile pods (1/point) each carrying 15 x Bifors HMM-01 micro-missiles, or a combination of above load-outs and other guided and unguided ordnance

The kit and its assembly:

It has been a while that I tackled one of these vintage ARII kits, and this time the build became a relief project from Corona cabin fever and a major conversion project. This garish Valkyrie is fictional but was heavily based on a profile drawing published in the Macross source book “Variable Fighter Master File VF-1 Valkyrie” of SVF-51 (originally with deep yellow accents)

The kit is a VF-1J, but the head unit was replaced with an “A” variant from the spares box. It was basically built OOB, with the landing gear down. The only mods are some standard blade antennae, an IRST fairing under the nose and the fins’ tops were slightly modified, too. The pylons were modified to take the new ordnance – optically guided glide bombs à la AGM-62 “Walleye”, scratched from obscure AAMs from a Kangnam MiG-29 and painted in the style of early USAF GBUs.

The gun pod was also modified to accept a scratched wire display in its tail and holds the Valkyrie in flight. The pilot figure was just a guest for the in-flight photo sessions, later the canopy was glued to a mount in open position.

Painting and markings:

I had wanted to apply this spectacular scheme onto a model for a while, but could not get myself to use yellow, because I already have a similar VF-1 in USN high-viz livery and with yellow and black decorations. I considered other tones, and eventually settled for pink – as an unusual choice, but there are canonical VF-1s with such an exotic tone in their liveries.

The rest was straightforwardly adapted from the profile, even though the creation of the trim lines without masking was a challenge. I used various stripes of generic decal material in black and white to create shapes and demarcation lines, filling up larger areas with paint. The overall basic tone is Humbrol 40 (glossy FS 36440), plus Humbrol 200 (Pink), 22 (Gloss Black) and Revell 301 (Semi-matt White) for the flaps’ upper surfaces and the landing gear. The cockpit became medium grey with a black seat and brown cushions. The ventral gun pod became aluminum.

After basic painting, the model received an overall washing with thinned black ink to emphasize the engraved panel lines. A little post-shading was done, too, for a more graphic look, and then the decals (including most trim lines, e. g. in black on the wings and the nose, in white on the fins) were applied. The following basic markings came from various 1:100 VF-1 sheets, the tail code letters came from an RAF SEAC Spitfire from WWII. The modex codes consist of single digit decals (2mm size, TL Modellbau).

Finally, after some detail painting and highlights with clear paint had been added, the VF-1 was sealed with a semi-gloss acrylic varnish.

A small and quick interim project, realized in just a few days – most time passed while waiting for the gloss Humbrol enamels to cure properly… There are certainly better VF-1 models than the vintage ARII kits, but I just love them because they are small, simple and easy to modify. Staying close to the benchmark profile was quite a challenge but worked out fine, even though I had hoped that the pink would stand out a little more. But the plan to change the unit’s ID color for a staff flight aircraft turned out well, even though some compromises had to be made.

Some background:

The VF-1 was developed by Stonewell/Bellcom/Shinnakasu for the U.N. Spacy by using alien Overtechnology obtained from the SDF-1 Macross alien spaceship. Its production was preceded by an aerodynamic proving version of its airframe, the VF-X. Unlike all later VF vehicles, the VF-X was strictly a jet aircraft, built to demonstrate that a jet fighter with the features necessary to convert to Battroid mode was aerodynamically feasible. After the VF-X's testing was finished, an advanced concept atmospheric-only prototype, the VF-0 Phoenix, was flight-tested from 2005 to 2007 and briefly served as an active-duty fighter from 2007 to the VF-1's rollout in late 2008, while the bugs were being worked out of the full-up VF-1 prototype (VF-X-1).

This particular fighter sported the squadron’s typical striped high visibility markings over a standard gloss light gray base on wings and legs, but unlike normal machines of this unit, with deep yellow and black markings, was, together with two sister ships, assigned to the unit’s staff flight. Each of these VF-1’s carried the unit markings and additional flight leader decoration on the noses in non-regular colors: turquoise on “001”, violet on “002” and pink on “003” – giving them one of the most distinctive and attractive paint schemes during the Space War.

General characteristics:

All-environment variable fighter and tactical combat Battroid,

used by U.N. Spacy, U.N. Navy, U.N. Space Air Force

Accommodation:

Pilot only in Marty & Beck Mk-7 zero/zero ejection seat

Dimensions:

Fighter Mode:

Length 14.23 meters

Wingspan 14.78 meters (at 20° minimum sweep)

Height 3.84 meters

Battroid Mode:

Height 12.68 meters

Width 7.3 meters

Length 4.0 meters

Empty weight: 13.25 metric tons;

Standard T-O mass: 18.5 metric tons;

MTOW: 37.0 metric tons

Power Plant:

2x Shinnakasu Heavy Industry/P&W/Roice FF-2001 thermonuclear reaction turbine engines, output 650 MW each, rated at 11,500 kg in standard or in overboost (225.63 kN x 2)

4x Shinnakasu Heavy Industry NBS-1 high-thrust vernier thrusters (1 x counter reverse vernier thruster nozzle mounted on the side of each leg nacelle/air intake, 1 x wing thruster roll control system on each wingtip);

18x P&W LHP04 low-thrust vernier thrusters beneath multipurpose hook/handles

Performance:

Battroid Mode: maximum walking speed 160 km/h

Fighter Mode: at 10,000 m Mach 2.71; at 30,000+ m Mach 3.87

g limit: in space +7

Thrust-to-weight ratio: empty 3.47; standard T-O 2.49; maximum T-O 1.24

Design Features:

3-mode variable transformation; variable geometry wing; vertical take-off and landing; control-configurable vehicle; single-axis thrust vectoring; three "magic hand" manipulators for maintenance use; retractable canopy shield for Battroid mode and atmospheric reentry; option of GBP-1S system, atmospheric-escape booster, or FAST Pack system

Transformation:

Standard time from Fighter to Battroid (automated): under 5 sec.

Min. time from Fighter to Battroid (manual): 0.9 sec.

Armament:

1x internal Mauler RÖV-20 anti-aircraft laser cannon, firing 6,000 pulses per minute

1x Howard GU-11 55 mm three-barrel Gatling gun pod with 200 RPG, fired at 1,200 rds/min

4x underwing hard points for a wide variety of ordnance, including

12x AMM-1 hybrid guided multipurpose missiles (3/point), or

12x MK-82 LDGB conventional bombs (3/point), or

6x RMS-1 large anti-spaceship reaction missiles (2/outboard point, 1/inboard point), or

4x UUM-7 micro-missile pods (1/point) each carrying 15 x Bifors HMM-01 micro-missiles, or a combination of above load-outs and other guided and unguided ordnance

The kit and its assembly:

It has been a while that I tackled one of these vintage ARII kits, and this time the build became a relief project from Corona cabin fever and a major conversion project. This garish Valkyrie is fictional but was heavily based on a profile drawing published in the Macross source book “Variable Fighter Master File VF-1 Valkyrie” of SVF-51 (originally with deep yellow accents)

The kit is a VF-1J, but the head unit was replaced with an “A” variant from the spares box. It was basically built OOB, with the landing gear down. The only mods are some standard blade antennae, an IRST fairing under the nose and the fins’ tops were slightly modified, too. The pylons were modified to take the new ordnance – optically guided glide bombs à la AGM-62 “Walleye”, scratched from obscure AAMs from a Kangnam MiG-29 and painted in the style of early USAF GBUs.

The gun pod was also modified to accept a scratched wire display in its tail and holds the Valkyrie in flight. The pilot figure was just a guest for the in-flight photo sessions, later the canopy was glued to a mount in open position.

Painting and markings:

I had wanted to apply this spectacular scheme onto a model for a while, but could not get myself to use yellow, because I already have a similar VF-1 in USN high-viz livery and with yellow and black decorations. I considered other tones, and eventually settled for pink – as an unusual choice, but there are canonical VF-1s with such an exotic tone in their liveries.

The rest was straightforwardly adapted from the profile, even though the creation of the trim lines without masking was a challenge. I used various stripes of generic decal material in black and white to create shapes and demarcation lines, filling up larger areas with paint. The overall basic tone is Humbrol 40 (glossy FS 36440), plus Humbrol 200 (Pink), 22 (Gloss Black) and Revell 301 (Semi-matt White) for the flaps’ upper surfaces and the landing gear. The cockpit became medium grey with a black seat and brown cushions. The ventral gun pod became aluminum.

After basic painting, the model received an overall washing with thinned black ink to emphasize the engraved panel lines. A little post-shading was done, too, for a more graphic look, and then the decals (including most trim lines, e. g. in black on the wings and the nose, in white on the fins) were applied. The following basic markings came from various 1:100 VF-1 sheets, the tail code letters came from an RAF SEAC Spitfire from WWII. The modex codes consist of single digit decals (2mm size, TL Modellbau).

Finally, after some detail painting and highlights with clear paint had been added, the VF-1 was sealed with a semi-gloss acrylic varnish.

A small and quick interim project, realized in just a few days – most time passed while waiting for the gloss Humbrol enamels to cure properly… There are certainly better VF-1 models than the vintage ARII kits, but I just love them because they are small, simple and easy to modify. Staying close to the benchmark profile was quite a challenge but worked out fine, even though I had hoped that the pink would stand out a little more. But the plan to change the unit’s ID color for a staff flight aircraft turned out well, even though some compromises had to be made.

Some background:

The VF-1 was developed by Stonewell/Bellcom/Shinnakasu for the U.N. Spacy by using alien Overtechnology obtained from the SDF-1 Macross alien spaceship. Its production was preceded by an aerodynamic proving version of its airframe, the VF-X. Unlike all later VF vehicles, the VF-X was strictly a jet aircraft, built to demonstrate that a jet fighter with the features necessary to convert to Battroid mode was aerodynamically feasible. After the VF-X's testing was finished, an advanced concept atmospheric-only prototype, the VF-0 Phoenix, was flight-tested from 2005 to 2007 and briefly served as an active-duty fighter from 2007 to the VF-1's rollout in late 2008, while the bugs were being worked out of the fully functional VF-1 prototype (the VF-X-1).

Despite its relatively short and intense production run the fighter remained active in many second line units and continued to show its worthiness even years later, e. g. through Milia Jenius who would use her old VF-1 fighter in defense of the colonization fleet - 35 years after the type's service introduction!

General characteristics:

All-environment variable fighter and tactical combat Battroid,

used by U.N. Spacy, U.N. Navy, U.N. Space Air Force and U.N.S. Marine Corps

Accommodation:

Pilot only in Marty & Beck Mk-7 zero/zero ejection seat

Dimensions:

Fighter Mode:

Length 14.23 meters

Wingspan 14.78 meters (at 20° minimum sweep)

Height 3.84 meters

Battroid Mode:

Height 12.68 meters

Width 7.3 meters

Length 4.0 meters

Empty weight: 13.25 metric tons

Standard T-O mass: 18.5 metric tons

MTOW: 37.0 metric tons

Power Plant:

2x Shinnakasu Heavy Industry/P&W/Roice FF-2001 thermonuclear reaction turbine engines, output 650 MW each, rated at 11,500 kg in standard or 225.63 kN in overboost

4x Shinnakasu Heavy Industry NBS-1 high-thrust vernier thrusters (1 x counter reverse vernier thruster nozzle mounted on the side of each leg nacelle/air intake, 1 x wing thruster roll control system on each wingtip)

18x P&W LHP04 low-thrust vernier thrusters beneath multipurpose hook/handles

Performance:

Battroid Mode: maximum walking speed 160 km/h

Fighter Mode: at 10,000 m Mach 2.71; at 30,000+ m Mach 3.87

g limit: in space +7

Thrust-to-weight ratio: empty 3.47; standard T-O 2.49; maximum T-O 1.24

Design Features:

3-mode variable transformation; variable geometry wing; vertical take-off and landing; control-configurable vehicle; single-axis thrust vectoring; three "magic hand" manipulators for maintenance use; retractable canopy shield for Battroid mode and atmospheric reentry; option of GBP-1S system, atmospheric-escape booster, or FAST Pack system

Transformation:

Standard time from Fighter to Battroid (automated): under 5 sec.

Min. time from Fighter to Battroid (manual): 0.9 sec.

Armament:

2x Mauler RÖV-20 anti-aircraft laser cannon, firing 6,000 ppm

1x Howard GU-11 55 mm three-barrel Gatling gun pod with 200 RPG, fired at 1,200 rpm

4x underwing hard points for a wide variety of ordnance, including…

12x AMM-1 hybrid guided multipurpose missiles (3/point), or

12x MK-82 LDGB conventional bombs (3/point), or

6x RMS-1 large anti-ship reaction missiles (2/outboard point, 1/inboard point), or

4x UUM-7 micro-missile pods (1/point) each carrying 15 x Bifors HMM-01 micro-missiles,

or a combination of above load-outs

The kit and its assembly:

Another small and vintage 1:100 VF-1 Fighter. This time it’s a non-canonical aircraft, based on a limited edition decal sheet that was published with the Japanese Model Graphix magazine in April 2001 (check this here for reference: www.starshipmodeler.com/mecha/jl_clrvalk.htm) with Hasegawa’s first release of their 1:72 Valkyrie Fighter kit. The give-away sheet featured several VF-1s, including an anniversary paint scheme for the 2.500th production Valkyrie. This is AFAIK neither ‘official’ nor canonical – but the pretty blue-and-white livery caught my attention, and I had for a long time the plan to re-create this livery on one of my favored 1:100 models. This would not work 100%, though, so I had to improvise – see below.

The kit was built OOB, with the landing gear down and (after taking the flight scenic pictures) with an open canopy, mounted on a small lift arm. Some typical small blade antennae the 1:100 simple kit lacks were added around the hull as a standard measure to improve the look. In the cockpit I added side consoles and a pilot figure for the in-flight shots.

The only non-standard additions are the IRST sensor fairing in front of the cockpit – the model of the anniversary VF-1 in the Model Graphix magazine carries this canonical upgrade, too, it was created from clear sprue material. Another tiny addition were the RHAWS antenna fairings at the top of the fins, scratched from small styrene profile bits.

The Valkyrie’s ordnance is standard and was taken OOB, featuring twelve AMM-1 missiles under the wings plus the standard GU-11 gatling gun pod; the latter was modified to hold a scratched wire display for in-flight pictures at its rear end. The Model Graphix VF-1 is insofar confusing as it seems to carry something that looks like a white ACMI pod on a non-standard pylon, rather attached to the legs than to the wings? That's odd and I could not make up a useful function, so I rejected this detail. The magazine Valkyrie's belly drop tank was - even though canonical, AFAIK - also not taken over to my later in-service status.

Painting and markings:

The more challenging part of the build, in two ways. First, re-creating the original commemorative livery would have called for home-made decals printed in opaque white for the manufacturers’ logos, something I was not able to do at home. So, I had to interpret the livery in a different way and decided to spin the aircraft’s story further: what would become of this VF-1 after its roll-out and PR event? In a war situation it would certainly be delivered quickly to a frontline unit, and since I had some proper markings left over, I decided to attach this colorful bird to the famous Skull Squadron, SVF-1, yet to a less glorious Flight. Since flight leaders and aces in the Macross universe would frequently fly VF-1s in individual non-standard liveries, sometimes even very bright ones, the 2,500th VF-1 could have well retained its catchy paint scheme.

The second part of the challenge: the actual paint job. Again, no suitable decals were at hand, so I had to re-create everything from scratch. The VF-1J kit I used thankfully came molded in white styrene, so that the front half of the aircraft could be easily painted in white, with no darker/colored plastic shining through. I painted the white (Revell 301, a very pure white) with a brush first. For the blue rear half, I settled upon an intense and deep cobalt blue tone (ModelMaster 2012). For the zigzag border between the colors, I used Tamiya masking tape, trimmed with a tailor’s zigzag scissors and applied in a slightly overlapping pattern for an irregular edge.

The landing gear became standard all-white (Revell 301, too), with bright red edges (Humbrol 174) on the covers. Antenna fairings were painted with radome tan (Humbrol 7) as small color highlights.

The cockpit interior became standard medium grey (Revell 47) with a black ejection seat with brown cushions (Humbrol 119 and Revell 84), and brown “black boxes” behind the headrest. The air intakes as well as the interior of the VG wings were painted dark grey (Revell 77). The jet nozzles/feet were internally painted with Humbrol 27003 (Steel Metallizer) and with Revell 91 on the outside, and they were later thoroughly treated with graphite to give them a burnt/worn look.

The GU-11 pod became standard bare metal (Revell 91, Iron metallic), the AMM-1s were painted in light grey (Humbrol 127) with many additional painted details in five additional colors, quite a tedious task when repeated twelve times...

After basic painting was one the model received a careful overall washing with black ink to emphasize the engraved panel lines, and light post-shading was done to the blue areas to emphasize single panels.

The full-color ’kite’ roundels came from an 1:100 VF-1A sheet, the skull emblems were left over from my Kotobukiya 1:72 VF-4 build some years ago, which OOB carries SVF-1 markings, too. The 2.500th aircraft nose art decoration was printed on clear decal film with an ink jet printer at home, even though it’s so small that no details can be discerned on the model. SVF-1’s “ML” tail code was created with single white decal letters (RAF WWII font), the red “555” modex came from an PrintScale A-26 Invader sheet, it's part of a USAF serial number from an all-black Korean War era aircraft.

The wings' leading edges were finished in medium grey, done with decal sheet material. The Model Graphix Valkyrie does not sport this detail, but I think that the VF-1 looks better with them and more realistic. Red warning stripes around the legs - also not seen on the model in the magazine - were made from similar material.

The confetti along the jagged edge between the white and the blue areas was created with decal material, too – every bit was cut out and put into place one for one… To match the cobalt blue tone, the respective enamel paint was applied on clear decal sheet material and cut into small bits. For the white and red confetti, generic decal sheet material was used. All in all, this was another tedious process, but, at the small 1:100 scale, masks or tape would have been much more complex and less successful with the brushes I use for painting. For this home-made approach the result looks quite good!

Finally, after some typical details and position lights had been added with clear paints over a silver base, the small VF-1 was sealed with a coat of semi-matt acrylic varnish, giving it a slightly shiny finish.

A pretty VF-1 – even though I’d call it purely fictional, despite being based on material that was published in a Japanese magazine more than 20 years ago. The simple yet striking livery was a bit tricky to create, but the result, with the additional SVF-1 unit markings, looks good and makes me wonder how this machine would look with FAST pack elements for use in space or as a transformed Battroid?

Some background:

The VF-1 was developed by Stonewell/Bellcom/Shinnakasu for the U.N. Spacy by using alien Overtechnology obtained from the SDF-1 Macross alien spaceship. It was preceded into production by an aerodynamic proving version of its airframe, the VF-X. Unlike all later VF vehicles, the VF-X was strictly a jet aircraft, built to demonstrate that a jet fighter with the features necessary to convert to Battroid mode was aerodynamically feasible.

However, the fighter remained active in many second line units and continued to show its worthiness years later, e. g. through Milia Jenius who would use her old VF-1 fighter in defense of the colonization fleet - 35 years after the type's service introduction!

General characteristics:

Equipment Type: all-environment variable fighter and tactical combat battroid

Government: U.N. Spacy, U.N. Navy, U.N. Space Air Force

Accommodation: pilot only in Marty & Beck Mk-7 zero/zero ejection seat

Dimensions:

Fighter Mode:

- Length 14.23 meters

- Wingspan 14.78 meters (fully extended)

- Height 3.84 meters

Battroid Mode:

- Height 12.68 meters

- Width 7.3 meters

- Length 4.0 meters

Empty weight: 13.25 metric tons

Standard T-O mass: 18.5 metric tons

MTOW: 37.0 metric tons

Powerplant:

2x Shinnakasu Heavy Industry/P&W/Roice FF-2008 thermonuclear reaction turbine engines,

output 650 MW each, rated at 11,500 kg in standard or in overboost (225.63 kN x 2)

4x Shinnakasu Heavy Industry NBS-1 high-thrust vernier thrusters (1 x counter reverse

vernier thruster nozzle mounted on the side of each leg nacelle/air intake,

1x wing thruster roll control system on each wingtip)

18x P&W LHP04 low-thrust vernier thrusters beneath multipurpose hook/handles

Performance:

Battroid Mode: maximum walking speed 160 km/h

Fighter Mode: at 10,000 m Mach 2.71; at 30,000+ m Mach 3.87

g limit: in space +7

Thrust-to-weight ratio: empty 3.47; standard T-O 2.49; maximum T-O 1.24

Design features:

3-mode variable transformation; variable geometry wing; vertical take-off and landing; control-configurable vehicle; single-axis thrust vectoring; three "magic hand" manipulators for maintenance use; retractable canopy shield for Battroid mode and atmospheric reentry; option of GBP-1S system, atmospheric-escape booster, or FAST Pack system

Transformation:

Standard time from Fighter to Battroid (automated): under 5 sec.

Minimum time from Fighter to Battroid (manual): 0.9 sec.

Armament:

1x internal Mauler RÖV-20 anti-aircraft laser cannon, firing 6,000 pulses per minute

1x Howard GU-11 55 mm three-barrel Gatling gun pod with 200 rds fired at 1,200 rds/min

4x underwing hard points for a wide variety of ordnance, including

- 12x AMM-1 hybrid guided multipurpose missiles (3/point), or

- 12x MK-82 LDGB conventional bombs (3/point), or

- 6x RMS-1 large anti-ship reaction missiles (2/outboard point, 1/inboard point), or

- 4x UUM-7 micro-missile pods (1/point), each carrying 15x Bifors HMM-01 micro-missiles,

or a combination of above load-outs

Optional Armament:

Shinnakasu Heavy Industry GBP-1S ground-combat protector weapon system, or

Shinnakasu Heavy Industry FAST Pack augmentative space weapon system

The kit and its assembly:

Another submission to the 2017 "Science Fiction" Group Build at whatifmodelers.com, and once more the eventual realization of a long- plan: a VF-1 in a dazzle scheme! To my surprise, I have never seen this, neither in the canonical sources (except for a VF-5000 with an all-grey splinter scheme, similar to the experimental US Keith Ferris schemes), nor on a model? Well, time to try this stunt ...again; I had actually built a VF-1D as a non-transformable supersonic trainer many years ago, and applied a livery inspired by the Keith Ferris schemes, but with very soft blue-grey tones, so that the disruptive effect of the underlying splinter would hardly "work". So, this is a second approach to the theme, and a more visually-oriented one.

This vintage ARII VF-1J fighter kit was built OOB, with the landing gear tucked up. This kit showed its age, though, the moulds seem to be well worn because the sprues showed considerable flash and other soft spots.

Anyway, the model received my usual additions of some blade antennae, a pilot figure and a custom display stand in/under the ventral cannon pod. The ordnance is standard, too, the full load of a dozen AAM-1 missiles is OOB. The only true additions are a small, scratched fairing for an IRST sensor under the nose, seen in a source book profile of an U.N.S.A.F. VF-1, and RHAWS antennae at the top of the fins.

Painting and markings:

This was the bigger part of the work, and a creative one, too. I did not simply want to copy an existing scheme, e .g. the Keith Ferris schemes that had been tested on some US aircraft.

The scheme was to be disruptive, confusing and also decorative - true camouflage was rather a secondary requirement, but welcome. Creating such a scheme from scratch is not as easy as it sounds, because you have to avoid collisions of the same color, the overall look needs some balance, and the scheme and its single shard shapes were to somewhat correspond with the Valkyrie’s outlines, too.

Since I did not dare to improvise this directly on the kit, and because I wanted to use more than three tones for the paint scheme, I actually created a VF-1 4-side view on a sheet of paper and started painting it out with colored pencils!

This was actually very helpful and I ended up with a four-tone scheme, rooted in pure black and white and somewhat inspired by pre-WWII dazzle schemes for ships.

Consequently the tones are black (I used a tone called Tar Black, Revell 6, which is actually a very dark grey), a dark/medium grey (Humbrol 27), light grey (Humbrol 64) and white (again, not the pure tone, but rather a very light grey, mixed from 95% Humbrol 130 and 5% Humbrol 64).

The pattern consists of large color sections, geometrical shapes, wedges and a few stripes at some intersections. It (unintentionally) reminds of certain late Su-27 schemes in Russian services, as well as US aggressors that carry similar outfits, e. g. some F-18s of USN’s VFC-12. But these are rather geometrical shapes added to a camouflage/grey background, and not as integral as my design.

The scheme was applied mostly free-handedly with brushes and a mix of enamels and acrylic paint. From certain angles it actually breaks up the VF-1's outlines well, esp. its silhouette, and at a quick glance it is actually hard to tell the Valkyrie’s orientation or direction of flight. In order to add some more onlooker confusion, I also added a fake cockpit with a white pilot helmet (cut from decal sheet) on top of the fuselage.

All other markings are rather minimal and subdued. Lacking different contrasting color options, I used yellow decals for the “U.N. Spacy” tags on the legs and the upper starboard wing. The “kite” insignia in grey and white were printed at home, while the tactical code comes from a Tamiya 1:100 Thunderchief. The chequered stripe on top of the fin is a generic decal, and blank, beige decal sheet was used for the wings’ and fins’ leading edges.

The rest came mostly from various OOB VF-1 sheets.

The ordnance was painted authentically, too. The AMM-1’s became all-white with black and red trim, the gun pod was painted Dark Sea Grey (Humbrol 123), blending into the overall color palette of this dazzle VF-1.

Except for a black ink wash, emphasizing the engraved panel lines, not much other weathering was done. Finally, the kit was sealed with matt acrylic varnish.

An… interesting result, and I am surprised how much the dazzle scheme changes the overall look of the VF-1, despite no fundamental changes to the airframe as such. Building was relatively simple, but the kit is not complex – just pretty old. Anyway, this updated aggressor bird makes a nice addition to the VF-1 collection, a worthwhile effort. A true eye catcher, I’d say.

Some background:

The VF-1 was developed by Stonewell/Bellcom/Shinnakasu for the U.N. Spacy by using alien Overtechnology obtained from the SDF-1 Macross alien spaceship. Its production was preceded by an aerodynamic proving version of its airframe, the VF-X. Unlike all later VF vehicles, the VF-X was strictly a jet aircraft, built to demonstrate that a jet fighter with the features necessary to convert to Battroid mode was aerodynamically feasible. After the VF-X's testing was finished, an advanced concept atmospheric-only prototype, the VF-0 Phoenix, was flight-tested from 2005 to 2007 and briefly served as an active-duty fighter from 2007 to the VF-1's rollout in late 2008, while the bugs were being worked out of the fully functional VF-1 prototype (the VF-X-1).

Despite its relatively short and intense production run the fighter remained active in many second line units and continued to show its worthiness even years later, e. g. through Milia Jenius who would use her old VF-1 fighter in defense of the colonization fleet - 35 years after the type's service introduction!

General characteristics:

All-environment variable fighter and tactical combat Battroid,

used by U.N. Spacy, U.N. Navy, U.N. Space Air Force and U.N.S. Marine Corps

Accommodation:

Pilot only in Marty & Beck Mk-7 zero/zero ejection seat

Dimensions:

Fighter Mode:

Length 14.23 meters

Wingspan 14.78 meters (at 20° minimum sweep)

Height 3.84 meters

Battroid Mode:

Height 12.68 meters

Width 7.3 meters

Length 4.0 meters

Empty weight: 13.25 metric tons

Standard T-O mass: 18.5 metric tons

MTOW: 37.0 metric tons

Power Plant:

2x Shinnakasu Heavy Industry/P&W/Roice FF-2001 thermonuclear reaction turbine engines, output 650 MW each, rated at 11,500 kg in standard or 225.63 kN in overboost

4x Shinnakasu Heavy Industry NBS-1 high-thrust vernier thrusters (1 x counter reverse vernier thruster nozzle mounted on the side of each leg nacelle/air intake, 1 x wing thruster roll control system on each wingtip)

18x P&W LHP04 low-thrust vernier thrusters beneath multipurpose hook/handles

Performance:

Battroid Mode: maximum walking speed 160 km/h

Fighter Mode: at 10,000 m Mach 2.71; at 30,000+ m Mach 3.87

g limit: in space +7

Thrust-to-weight ratio: empty 3.47; standard T-O 2.49; maximum T-O 1.24

Design Features:

3-mode variable transformation; variable geometry wing; vertical take-off and landing; control-configurable vehicle; single-axis thrust vectoring; three "magic hand" manipulators for maintenance use; retractable canopy shield for Battroid mode and atmospheric reentry; option of GBP-1S system, atmospheric-escape booster, or FAST Pack system

Transformation:

Standard time from Fighter to Battroid (automated): under 5 sec.

Min. time from Fighter to Battroid (manual): 0.9 sec.

Armament:

2x Mauler RÖV-20 anti-aircraft laser cannon, firing 6,000 ppm

1x Howard GU-11 55 mm three-barrel Gatling gun pod with 200 RPG, fired at 1,200 rpm

4x underwing hard points for a wide variety of ordnance, including…

12x AMM-1 hybrid guided multipurpose missiles (3/point), or

12x MK-82 LDGB conventional bombs (3/point), or

6x RMS-1 large anti-ship reaction missiles (2/outboard point, 1/inboard point), or

4x UUM-7 micro-missile pods (1/point) each carrying 15 x Bifors HMM-01 micro-missiles,

or a combination of above load-outs

The kit and its assembly:

Another small and vintage 1:100 VF-1 Fighter. This time it’s a non-canonical aircraft, based on a limited edition decal sheet that was published with the Japanese Model Graphix magazine in April 2001 (check this here for reference: www.starshipmodeler.com/mecha/jl_clrvalk.htm) with Hasegawa’s first release of their 1:72 Valkyrie Fighter kit. The give-away sheet featured several VF-1s, including an anniversary paint scheme for the 2.500th production Valkyrie. This is AFAIK neither ‘official’ nor canonical – but the pretty blue-and-white livery caught my attention, and I had for a long time the plan to re-create this livery on one of my favored 1:100 models. This would not work 100%, though, so I had to improvise – see below.

The kit was built OOB, with the landing gear down and (after taking the flight scenic pictures) with an open canopy, mounted on a small lift arm. Some typical small blade antennae the 1:100 simple kit lacks were added around the hull as a standard measure to improve the look. In the cockpit I added side consoles and a pilot figure for the in-flight shots.

The only non-standard additions are the IRST sensor fairing in front of the cockpit – the model of the anniversary VF-1 in the Model Graphix magazine carries this canonical upgrade, too, it was created from clear sprue material. Another tiny addition were the RHAWS antenna fairings at the top of the fins, scratched from small styrene profile bits.

The Valkyrie’s ordnance is standard and was taken OOB, featuring twelve AMM-1 missiles under the wings plus the standard GU-11 gatling gun pod; the latter was modified to hold a scratched wire display for in-flight pictures at its rear end. The Model Graphix VF-1 is insofar confusing as it seems to carry something that looks like a white ACMI pod on a non-standard pylon, rather attached to the legs than to the wings? That's odd and I could not make up a useful function, so I rejected this detail. The magazine Valkyrie's belly drop tank was - even though canonical, AFAIK - also not taken over to my later in-service status.

Painting and markings:

The more challenging part of the build, in two ways. First, re-creating the original commemorative livery would have called for home-made decals printed in opaque white for the manufacturers’ logos, something I was not able to do at home. So, I had to interpret the livery in a different way and decided to spin the aircraft’s story further: what would become of this VF-1 after its roll-out and PR event? In a war situation it would certainly be delivered quickly to a frontline unit, and since I had some proper markings left over, I decided to attach this colorful bird to the famous Skull Squadron, SVF-1, yet to a less glorious Flight. Since flight leaders and aces in the Macross universe would frequently fly VF-1s in individual non-standard liveries, sometimes even very bright ones, the 2,500th VF-1 could have well retained its catchy paint scheme.

The second part of the challenge: the actual paint job. Again, no suitable decals were at hand, so I had to re-create everything from scratch. The VF-1J kit I used thankfully came molded in white styrene, so that the front half of the aircraft could be easily painted in white, with no darker/colored plastic shining through. I painted the white (Revell 301, a very pure white) with a brush first. For the blue rear half, I settled upon an intense and deep cobalt blue tone (ModelMaster 2012). For the zigzag border between the colors, I used Tamiya masking tape, trimmed with a tailor’s zigzag scissors and applied in a slightly overlapping pattern for an irregular edge.

The landing gear became standard all-white (Revell 301, too), with bright red edges (Humbrol 174) on the covers. Antenna fairings were painted with radome tan (Humbrol 7) as small color highlights.

The cockpit interior became standard medium grey (Revell 47) with a black ejection seat with brown cushions (Humbrol 119 and Revell 84), and brown “black boxes” behind the headrest. The air intakes as well as the interior of the VG wings were painted dark grey (Revell 77). The jet nozzles/feet were internally painted with Humbrol 27003 (Steel Metallizer) and with Revell 91 on the outside, and they were later thoroughly treated with graphite to give them a burnt/worn look.

The GU-11 pod became standard bare metal (Revell 91, Iron metallic), the AMM-1s were painted in light grey (Humbrol 127) with many additional painted details in five additional colors, quite a tedious task when repeated twelve times...

After basic painting was one the model received a careful overall washing with black ink to emphasize the engraved panel lines, and light post-shading was done to the blue areas to emphasize single panels.

The full-color ’kite’ roundels came from an 1:100 VF-1A sheet, the skull emblems were left over from my Kotobukiya 1:72 VF-4 build some years ago, which OOB carries SVF-1 markings, too. The 2.500th aircraft nose art decoration was printed on clear decal film with an ink jet printer at home, even though it’s so small that no details can be discerned on the model. SVF-1’s “ML” tail code was created with single white decal letters (RAF WWII font), the red “555” modex came from an PrintScale A-26 Invader sheet, it's part of a USAF serial number from an all-black Korean War era aircraft.

The wings' leading edges were finished in medium grey, done with decal sheet material. The Model Graphix Valkyrie does not sport this detail, but I think that the VF-1 looks better with them and more realistic. Red warning stripes around the legs - also not seen on the model in the magazine - were made from similar material.

The confetti along the jagged edge between the white and the blue areas was created with decal material, too – every bit was cut out and put into place one for one… To match the cobalt blue tone, the respective enamel paint was applied on clear decal sheet material and cut into small bits. For the white and red confetti, generic decal sheet material was used. All in all, this was another tedious process, but, at the small 1:100 scale, masks or tape would have been much more complex and less successful with the brushes I use for painting. For this home-made approach the result looks quite good!

Finally, after some typical details and position lights had been added with clear paints over a silver base, the small VF-1 was sealed with a coat of semi-matt acrylic varnish, giving it a slightly shiny finish.

A pretty VF-1 – even though I’d call it purely fictional, despite being based on material that was published in a Japanese magazine more than 20 years ago. The simple yet striking livery was a bit tricky to create, but the result, with the additional SVF-1 unit markings, looks good and makes me wonder how this machine would look with FAST pack elements for use in space or as a transformed Battroid?

Some background:

The VF-1 was developed by Stonewell/Bellcom/Shinnakasu for the U.N. Spacy by using alien Overtechnology obtained from the SDF-1 Macross alien spaceship. It was preceded into production by an aerodynamic proving version of its airframe, the VF-X. Unlike all later VF vehicles, the VF-X was strictly a jet aircraft, built to demonstrate that a jet fighter with the features necessary to convert to Battroid mode was aerodynamically feasible.

However, the fighter remained active in many second line units and continued to show its worthiness years later, e. g. through Milia Jenius who would use her old VF-1 fighter in defense of the colonization fleet - 35 years after the type's service introduction!

General characteristics:

Equipment Type: all-environment variable fighter and tactical combat battroid

Government: U.N. Spacy, U.N. Navy, U.N. Space Air Force

Accommodation: pilot only in Marty & Beck Mk-7 zero/zero ejection seat

Dimensions:

Fighter Mode:

Length 14.23 meters

Wingspan 14.78 meters (fully extended)

Height 3.84 meters

Battroid Mode:

Height 12.68 meters

Width 7.3 meters

Length 4.0 meters

Empty weight: 13.25 metric tons;

Standard T-O mass: 18.5 metric tons;

MTOW: 37.0 metric tons

Powerplant:

2x Shinnakasu Heavy Industry/P&W/Roice FF-2008 thermonuclear reaction turbine engines, output 650 MW each, rated at 11,500 kg in standard or in overboost (225.63 kN x 2)

4 x Shinnakasu Heavy Industry NBS-1 high-thrust vernier thrusters (1 x counter reverse vernier thruster nozzle mounted on the side of each leg nacelle/air intake, 1 x wing thruster roll control system on each wingtip);

18 x P&W LHP04 low-thrust vernier thrusters beneath multipurpose hook/handles

Performance:

Battroid Mode: maximum walking speed 160 km/h

Fighter Mode: at 10,000 m Mach 2.71; at 30,000+ m Mach 3.87

g limit: in space +7

Thrust-to-weight ratio: empty 3.47; standard T-O 2.49; maximum T-O 1.24

Design features:

3-mode variable transformation; variable geometry wing; vertical take-off and landing; control-configurable vehicle; single-axis thrust vectoring; three "magic hand" manipulators for maintenance use; retractable canopy shield for Battroid mode and atmospheric reentry; option of GBP-1S system, atmospheric-escape booster, or FAST Pack system

Transformation:

Standard time from Fighter to Battroid (automated): under 5 sec.

Minimum time from Fighter to Battroid (manual): 0.9 sec.

Armament:

2x internal Mauler RÖV-20 anti-aircraft laser cannon, firing 6,000 pulses per minute

1x Howard GU-11 55 mm three-barrel Gatling gun pod with 200 rds fired at 1,200 rds/min

4 x underwing hard points for a wide variety of ordnance, including

- 12x AMM-1 hybrid guided multipurpose missiles (3/point), or

- 12x MK-82 LDGB conventional bombs (3/point), or

- 6x RMS-1 large anti-ship reaction missiles (2/outboard point, 1/inboard point), or

- 4x UUM-7 micro-missile pods (1/point), each carrying 15x Bifors HMM-01 micro-missiles,

or a combination of above load-outs

Optional Armament:

Shinnakasu Heavy Industry GBP-1S ground-combat protector weapon system, or

Shinnakasu Heavy Industry FAST Pack augmentative space weapon system

The kit and its assembly:

The second vintage 1:100 ARII VF-1 as a part of a Zentraedi squadron series, the canonical SVF-789. This one was inspired by a profile of such a machine in the “Macross Variable Fighter Master File: VF-1 Valkyrie Part 1” Art Book – true robot porn and full of valuable detail and background material for anyone who’d consider building a VF-1.

The SVF-789 machine shown in the book is a simple VF-1A, but with Zentraedi language markings and in a rather unusual livery in all dark green, yellow and black trim and grey low-viz roundels. While this does IMHO not really look sexy, I found the idea of a squadron, manned by former (alien) enemies very interesting. And so I took up the idea and started fleshing it out – including the idea of SVF-789’s initial base deep in the Amazonian jungle (justifying somehow the all-green livery!?).

This second build was to represent a flight leader’s aircraft, and consequently the basis is a VF-1J kit (which only differs outwardly through the head). In order to set the machine a little more apart I decided to incorporate some “Plus” program updates, including a different nose tip for the updated radar and two small fairings for IRST and laser designator sensors above and below the nose section, respectively. The fins’ tips were also modified – they were elongated a little through styrene sheet replacements.

This update is a bit early for the official Macross timeline, but I just wanted more than a standard J Valkyrie in a more exotic paint scheme.

Otherwise, this VF-1J fighter kit was built OOB, with the landing gear tucked up and the usual additions of some blade antennae, a pilot figure and a custom display stand in/under the ventral cannon pod.

The ordnance is non-standard, though; in this case the aircraft received two pairs of air-to-ground missiles (actually some misshapen Soviet AAMs from the Academy MiG-23 kit – either very fat R-60 ‘Aphid’ AAMs or very poor renditions of vintage K-6 ‘Alkali’ missiles?) inboards and four AMM-1 missiles on the outer pylons, with the lowest missile replaced by scratched ECM and chaff dispenser pods. The gun pod was also modified with a new nozzle, with parts from a surplus AMM-1 missile – also inspired by a source book entry.

Painting and markings:

This was planned to be a more exotic or extravagant interpretation of the profile from the book, which was already used as a guideline for the VF-1A build. The overall design of an all-green livery with a white nose tip as basis was kept, together with yellow trim on wings, fins and the stabilizer fins on the Valkyrie’s legs. The VF-1A already deviated from this slightly, but now I wanted something more outstanding – a bold flight leader’s mount.

Zentraedi vehicles tend to be rather colorful, so the tones I chose for painting were rather bright. For instance, the initial idea for the green was FS 34079, a tone which also comes close to the printed profile in the book. But it looked IMHO too militaristic, or too little anime-esque, so I eventually settled for something brighter and used Humbrol 195 (called Dark Satin Green, but it’s actually RAL 6020, Chromoxyd Grün, a color used on German railway wagons during and after WWII), later shaded with black ink for the engravings and Humbrol 76 (Uniform Green) for highlights.

The nose became pure white, the leading edge trim was painted with Revell 310 (Lufthansa Gelb, RAL 1028), a deep and rich tone that stands out well from the murky green.

In order to set this J Valkyrie apart from the all-dark green basic VF-1As, I added two bright green tones and a light purple as flight color: Humbrol 36 (called Pastel Green, but it’s actually very yellow-ish), 38 (Lime) and Napoleonic Violet from ModelMaster’s Authentic Line, respectively. 36 was applied to the lower legs and around the cockpit section, including the spinal fairing with the air brake. The slightly darker 38 was used on the wings and fins as well as for the fuselage’s and wings’ underside. On top of the wings and the inner and outer fins, the surfaces were segmented, with the dark green as basic color.

As an additional contrast, the head, shoulder guards and additional trim highlights on the legs as well as for a double chevron on the breast plate were painted in the pale purple tone. A sick color combination, but very Zentraedi/Meltraedi-esque!

The cockpit interior was, according to Macross references, painted in Dark Gull Grey. The seat received brown cushions and the pilot figure was turned into a micronized Meltraedi (yes, the fictional pilot Taqisha T’saqeel is to be female) with a colorful jumpsuit in violet and white, plus a white and red helmet – and bright green skin! The gun pod became dark blue (Humbrol 112, Field Blue), the AMM-1 missiles received a pale grey livery while the air-to-ground missiles and the chaff dispenser became olive drab. As an additional contrast, the ECM pod became white. A wild mix of colors!

This was even enhanced through U.N. Spacy roundels in standard full color – their red really stands out. The squadron emblem/symbol on the fin was painted with a brush, but in this case in a smaller variant and with two USN/USAF style code letters for the home basis added.

Since I can not print white letters onto clear decal sheet at home, the aircraft’s tactical code ‘300’ was created with letters from the human alphabet. A simplification and deviation from the original concept, but I found the only alternative of painting tiny and delicate Zentraedi codes by brush and hand just to be too risky.

Finally, the kit was sealed with a sheen acrylic varnish – with the many, contrasting colors a pure matt finish somehow did not appear right.

Building was relatively simple, just the rhinoplasty was a little tricky – a very subtle modification, though, but the pointed and slightly deeper nose changed the VF-1’s look. The standard Zentraedi-style VF-1 of SVF-789 already looked …different, but this one is … bright, if not challenging to the naked eye. Anyway, there’s more in the creative pipeline from the Zentraedi unit – this aircraft’s pilot in the form of a modified resin garage kit.

Some background:

The VF-1 was developed by Stonewell/Bellcom/Shinnakasu for the U.N. Spacy by using alien Overtechnology obtained from the SDF-1 Macross alien spaceship. Its production was preceded by an aerodynamic proving version of its airframe, the VF-X. Unlike all later VF vehicles, the VF-X was strictly a jet aircraft, built to demonstrate that a jet fighter with the features necessary to convert to Battroid mode was aerodynamically feasible. After the VF-X's testing was finished, an advanced concept atmospheric-only prototype, the VF-0 Phoenix, was flight-tested from 2005 to 2007 and briefly served as an active-duty fighter from 2007 to the VF-1's rollout in late 2008, while the bugs were being worked out of the fully functional VF-1 prototype (the VF-X-1).

Despite its relatively short and intense production run the fighter remained active in many second line units and continued to show its worthiness even years later, e. g. through Milia Jenius who would use her old VF-1 fighter in defense of the colonization fleet - 35 years after the type's service introduction!

General characteristics:

All-environment variable fighter and tactical combat Battroid,

used by U.N. Spacy, U.N. Navy, U.N. Space Air Force and U.N.S. Marine Corps

Accommodation:

Pilot only in Marty & Beck Mk-7 zero/zero ejection seat

Dimensions:

Fighter Mode:

Length 14.23 meters

Wingspan 14.78 meters (at 20° minimum sweep)

Height 3.84 meters

Battroid Mode:

Height 12.68 meters

Width 7.3 meters

Length 4.0 meters

Empty weight: 13.25 metric tons

Standard T-O mass: 18.5 metric tons

MTOW: 37.0 metric tons

Power Plant:

2x Shinnakasu Heavy Industry/P&W/Roice FF-2001 thermonuclear reaction turbine engines, output 650 MW each, rated at 11,500 kg in standard or 225.63 kN in overboost

4x Shinnakasu Heavy Industry NBS-1 high-thrust vernier thrusters (1 x counter reverse vernier thruster nozzle mounted on the side of each leg nacelle/air intake, 1 x wing thruster roll control system on each wingtip)

18x P&W LHP04 low-thrust vernier thrusters beneath multipurpose hook/handles

Performance:

Battroid Mode: maximum walking speed 160 km/h

Fighter Mode: at 10,000 m Mach 2.71; at 30,000+ m Mach 3.87

g limit: in space +7

Thrust-to-weight ratio: empty 3.47; standard T-O 2.49; maximum T-O 1.24

Design Features:

3-mode variable transformation; variable geometry wing; vertical take-off and landing; control-configurable vehicle; single-axis thrust vectoring; three "magic hand" manipulators for maintenance use; retractable canopy shield for Battroid mode and atmospheric reentry; option of GBP-1S system, atmospheric-escape booster, or FAST Pack system

Transformation:

Standard time from Fighter to Battroid (automated): under 5 sec.

Min. time from Fighter to Battroid (manual): 0.9 sec.

Armament:

2x Mauler RÖV-20 anti-aircraft laser cannon, firing 6,000 ppm

1x Howard GU-11 55 mm three-barrel Gatling gun pod with 200 RPG, fired at 1,200 rpm

4x underwing hard points for a wide variety of ordnance, including…

12x AMM-1 hybrid guided multipurpose missiles (3/point), or

12x MK-82 LDGB conventional bombs (3/point), or

6x RMS-1 large anti-ship reaction missiles (2/outboard point, 1/inboard point), or

4x UUM-7 micro-missile pods (1/point) each carrying 15 x Bifors HMM-01 micro-missiles,

or a combination of above load-outs

The kit and its assembly:

Another small and vintage 1:100 VF-1 Fighter. This time it’s a non-canonical aircraft, based on a limited edition decal sheet that was published with the Japanese Model Graphix magazine in April 2001 (check this here for reference: www.starshipmodeler.com/mecha/jl_clrvalk.htm) with Hasegawa’s first release of their 1:72 Valkyrie Fighter kit. The give-away sheet featured several VF-1s, including an anniversary paint scheme for the 2.500th production Valkyrie. This is AFAIK neither ‘official’ nor canonical – but the pretty blue-and-white livery caught my attention, and I had for a long time the plan to re-create this livery on one of my favored 1:100 models. This would not work 100%, though, so I had to improvise – see below.

The kit was built OOB, with the landing gear down and (after taking the flight scenic pictures) with an open canopy, mounted on a small lift arm. Some typical small blade antennae the 1:100 simple kit lacks were added around the hull as a standard measure to improve the look. In the cockpit I added side consoles and a pilot figure for the in-flight shots.

The only non-standard additions are the IRST sensor fairing in front of the cockpit – the model of the anniversary VF-1 in the Model Graphix magazine carries this canonical upgrade, too, it was created from clear sprue material. Another tiny addition were the RHAWS antenna fairings at the top of the fins, scratched from small styrene profile bits.

The Valkyrie’s ordnance is standard and was taken OOB, featuring twelve AMM-1 missiles under the wings plus the standard GU-11 gatling gun pod; the latter was modified to hold a scratched wire display for in-flight pictures at its rear end. The Model Graphix VF-1 is insofar confusing as it seems to carry something that looks like a white ACMI pod on a non-standard pylon, rather attached to the legs than to the wings? That's odd and I could not make up a useful function, so I rejected this detail. The magazine Valkyrie's belly drop tank was - even though canonical, AFAIK - also not taken over to my later in-service status.

Painting and markings:

The more challenging part of the build, in two ways. First, re-creating the original commemorative livery would have called for home-made decals printed in opaque white for the manufacturers’ logos, something I was not able to do at home. So, I had to interpret the livery in a different way and decided to spin the aircraft’s story further: what would become of this VF-1 after its roll-out and PR event? In a war situation it would certainly be delivered quickly to a frontline unit, and since I had some proper markings left over, I decided to attach this colorful bird to the famous Skull Squadron, SVF-1, yet to a less glorious Flight. Since flight leaders and aces in the Macross universe would frequently fly VF-1s in individual non-standard liveries, sometimes even very bright ones, the 2,500th VF-1 could have well retained its catchy paint scheme.

The second part of the challenge: the actual paint job. Again, no suitable decals were at hand, so I had to re-create everything from scratch. The VF-1J kit I used thankfully came molded in white styrene, so that the front half of the aircraft could be easily painted in white, with no darker/colored plastic shining through. I painted the white (Revell 301, a very pure white) with a brush first. For the blue rear half, I settled upon an intense and deep cobalt blue tone (ModelMaster 2012). For the zigzag border between the colors, I used Tamiya masking tape, trimmed with a tailor’s zigzag scissors and applied in a slightly overlapping pattern for an irregular edge.

The landing gear became standard all-white (Revell 301, too), with bright red edges (Humbrol 174) on the covers. Antenna fairings were painted with radome tan (Humbrol 7) as small color highlights.

The cockpit interior became standard medium grey (Revell 47) with a black ejection seat with brown cushions (Humbrol 119 and Revell 84), and brown “black boxes” behind the headrest. The air intakes as well as the interior of the VG wings were painted dark grey (Revell 77). The jet nozzles/feet were internally painted with Humbrol 27003 (Steel Metallizer) and with Revell 91 on the outside, and they were later thoroughly treated with graphite to give them a burnt/worn look.

The GU-11 pod became standard bare metal (Revell 91, Iron metallic), the AMM-1s were painted in light grey (Humbrol 127) with many additional painted details in five additional colors, quite a tedious task when repeated twelve times...

After basic painting was one the model received a careful overall washing with black ink to emphasize the engraved panel lines, and light post-shading was done to the blue areas to emphasize single panels.

The full-color ’kite’ roundels came from an 1:100 VF-1A sheet, the skull emblems were left over from my Kotobukiya 1:72 VF-4 build some years ago, which OOB carries SVF-1 markings, too. The 2.500th aircraft nose art decoration was printed on clear decal film with an ink jet printer at home, even though it’s so small that no details can be discerned on the model. SVF-1’s “ML” tail code was created with single white decal letters (RAF WWII font), the red “555” modex came from an PrintScale A-26 Invader sheet, it's part of a USAF serial number from an all-black Korean War era aircraft.

The wings' leading edges were finished in medium grey, done with decal sheet material. The Model Graphix Valkyrie does not sport this detail, but I think that the VF-1 looks better with them and more realistic. Red warning stripes around the legs - also not seen on the model in the magazine - were made from similar material.

The confetti along the jagged edge between the white and the blue areas was created with decal material, too – every bit was cut out and put into place one for one… To match the cobalt blue tone, the respective enamel paint was applied on clear decal sheet material and cut into small bits. For the white and red confetti, generic decal sheet material was used. All in all, this was another tedious process, but, at the small 1:100 scale, masks or tape would have been much more complex and less successful with the brushes I use for painting. For this home-made approach the result looks quite good!

Finally, after some typical details and position lights had been added with clear paints over a silver base, the small VF-1 was sealed with a coat of semi-matt acrylic varnish, giving it a slightly shiny finish.

A pretty VF-1 – even though I’d call it purely fictional, despite being based on material that was published in a Japanese magazine more than 20 years ago. The simple yet striking livery was a bit tricky to create, but the result, with the additional SVF-1 unit markings, looks good and makes me wonder how this machine would look with FAST pack elements for use in space or as a transformed Battroid?

Some background:

The VF-1 was developed by Stonewell/Bellcom/Shinnakasu for the U.N. Spacy by using alien Overtechnology obtained from the SDF-1 Macross alien spaceship. Its production was preceded by an aerodynamic proving version of its airframe, the VF-X. Unlike all later VF vehicles, the VF-X (sometimes referred to as VF-X1) was strictly a conventional/non-transformable jet aircraft, even though it incorporated many structural components and several key technologies that were vital for the transformable VF-1’s successful development that ran in parallel. Therefore, the VF-X was never intended as an air superiority fighter, but rather a flight-capable analogue test bed and proof of concept for the VF-1’s basic layout and major components. In this role, however, the VF-X made vital contributions to systems’ development that were later incorporated into the VF-1’s serial production and sped the program up considerably.

The fighter remained active in many second line units and continued to show its worthiness years later, e. g. through Milia Jenius who would use her old VF-1 fighter in defense of the colonization fleet - 35 years after the type's service introduction.

General characteristics:

Accommodation: One pilot in a Marty & Beck Mk-7 zero/zero ejection seat

Length 14.23 meters

Wingspan 14.78 meters (at 20° minimum sweep)

Height 3.84 meters

Empty weight: 13.25 metric tons

Standard T-O mass: 18.5 metric tons

Power Plant:

2x Shinnakasu Heavy Industry/P&W/Roice FF-2001 thermonuclear reaction turbine engines, output 650 MW each, rated at 11,500 kg in standard or in overboost (225.63 kN x 2)

4 x Shinnakasu Heavy Industry NBS-1 high-thrust vernier thrusters (1 x counter reverse vernier thruster nozzle mounted on the side of each leg nacelle/air intake, 1 x wing thruster roll control system on each wingtip);

Performance:

Top speed: Mach 2.71 at 10,000 m; Mach 3.87 at 30,000+ m

Thrust-to-weight ratio: empty 3.47; standard T-O 2.49; maximum T-O 1.24

Armament:

None installed, but the VF-X had 4x underwing hard points for a wide variety of ordnance, plus a ventral hardpoint for a Howard GU-11 55 mm three-barrel Gatling gun pod with 200 RPG, fired at 1,200 rds/min or other stores like test instruments

The model and its assembly:

Another submission to the “Prototypes” group build at whatifmodelers.com in July 2020. Being a VF-1 fan (and have built maybe twenty o these simple Arii kits), adding a VF-X was, more or less, a must – even more so because I had a suitable Valkyrie Fighter kit at hand for the conversion. As a side note, I have actually built something quite similar from a VF-1D many years ago: a fictional, non-transformable advanced trainer, without knowing about the VF-X at all.

Thanks to the “Macross - Perfect Memory” source book, the differences between the transformable VF-1 and its early testbed were easy to identify:

- Fixed legs with faired ducts from the intakes on (thighs)

- Ankle recesses disappeared

- Less and slightly different panel lines on the back and on the nose

- ventral head unit deleted and a respective fairing installed instead

- Levelled underside (shoulder fairings of the folded arms were cut down)

- Leg attachment points on the nose deleted

- No small, circular vernier thrusters all around the hull

- Some new/different venting grills (created mostly with 0.5mm black decal stripes)

Beyond the changes, the VF-1A was basically built OOB. Thankfully, the VF-X already features the later VF-1’s vectored thrust nozzles/feet, so that no changes had to be made in this respect. A pilot figure was added to the cockpit for the beauty pics, and after the flight scenes had been shot, the canopy remained open on a swing arm for static display. For the same reason, the model was built with the landing gear extended.

As a test aircraft, the underwing pylons and their AMM-1 ordnance were left away and the attachment points hidden with putty. I also omitted the ventral gun pod and left the aircraft clean. However, for the flight scene pictures, I implanted an adapter for a display holder made from wire.

In order to emphasize the test vehicle character of the VF-X, I gave the model a scratched spin recovery parachute installation between the fins, using a real world F-22 testbed as benchmark. It consists of styrene profiles, quite a delicate construction. For the same reason I gave the VF-X a long sensor boom on the nose, which changes the Valkyrie’s look, too. Finally, some small blade antennae were added to the nose and to the spine behind the cockpit.

Painting and markings:

To be honest, I have no idea if there was only a single VF-X prototype in the Macross universe, or more. Just one appears in the TV series in episode #33, and lack of suitable information and my personal lack of Japanese language proficiency prevents any deeper research. However, this would not keep me from inventing a personal interpretation of the canonical VF-X, especially because I do not really like the original livery from the TV series: an overall light grey with some simple black trim and “TEST” written on the (fixed) legs. Yamato did an 1:60 scale toy of the VF-X, but it was/is just a VF-1 with a ventral fairing; they added some shading to the basic grey – but this does not make the aircraft more attractive, IMHO.

When I looked at the original conceptual drawing of the VF-X in the “Macross - Perfect Memory” source book, however, I was immediately reminded of the F-15 prototypes from the Seventies (and this program used a total of twelve machines!). These featured originally a light grey (FS 36375?) overall base, to which bright dayglo orange markings on wings, fins and fuselage were soon added – in a very similar pattern to the VF-X. I think the VF-X livery was actually inspired by this, the time frame matches well with the production of the Macross TV series, too, and that’s what I adapted for my model.

In order to come close to the F-15 prototype livery, I gave “my” VF-X an overall basic coat of RAL 7047 “Telegrau 4”, one of German Telekom’s corporate colors and a very pale grey that can easily be mistaken for white when you do not have a contrast reference.

The cockpit received a medium grey finish, the ejection seat became black with brown cushions; the pilot figure is a 1:100 seated passenger from an architecture supplies, painted like an early VF-1 pilot in a white/blue suit. The jet nozzles/feet were painted with Revell 91 (Iron) and later treated with grinded graphite for a more metallic finish. The landing gear became classic white (I used Revell 301, which is a very pure tone, as contrast to the RAL 7047 on the hull), the air intake ducts and the internal sections of the VG wings were painted with dark grey (Revell 77).

For some diversity I took inspiration from the Yamato VF-X toy and added slightly darker (Humbrol 166, RAF Light Aircraft Grey) areas to the hull and the legs. Next, the panel lines were emphasized through a thinned black ink wash, but I did no panel post shading so that the VF-X would not look too dirty or worn.

Onto this basis I applied the orange dayglo markings. On the wings and fins, these were painted – they were applied with spray paint from a rattle can, involving lots of masking. The leading edges on wings and fins were created with grey decal sheet material, too. At this stage, some surface details and more fake panel lines were added with a soft pencil.

The orange cheatline under the cockpit is a personal addition; I found that some more orange had to be added to the nose for visual balance, and I eventually went for the simple, trimmed stripe (TL Modellbau material) instead of trying to apply decal sheet material around the jagged air intakes (F-15 prototype style). The black “TEST”, “VFX” and “U.N. Spacy” markings were designed at the computer and printed on clear inkjet decal paper. Even though the “real” VF-X does not feature the UNS “kite” insignia, I decided to add them to the model. These come from the OOB sheet, which also provided most (slightly yellowed) stencils.

Finally, the model was sealed with a coat of matt acrylic varnish (Italeri).

A rather different VF-1 project (and it is – to my astonishment – #28 in my 1:100 VF-1 Fighter mode collection!!!), with more changes to the basic model kit than one might expect at first sight. VF-X and VF-1 differ considerably from each other, despite identical outlines! However, I like the outcome, and I think that going a different route from the canonical grey/black livery paid out, the bright orange markings really make this VF-X stand out, and it looks IMHO more like a testbed than the “real” aircraft from the TV series.

Some background:

The VF-1 was developed by Stonewell/Bellcom/Shinnakasu for the U.N. Spacy by using alien Overtechnology obtained from the SDF-1 Macross alien spaceship. It was preceded into production by an aerodynamic proving version of its airframe, the VF-X. Unlike all later VF vehicles, the VF-X was strictly a jet aircraft, built to demonstrate that a jet fighter with the features necessary to convert to Battroid mode was aerodynamically feasible.

However, the fighter remained active in many second line units and continued to show its worthiness years later, e. g. through Milia Jenius who would use her old VF-1 fighter in defense of the colonization fleet - 35 years after the type's service introduction!

Equipment Type: all-environment variable fighter and tactical combat battroid

Government: U.N. Spacy, U.N. Navy, U.N. Space Air Force

Accommodation: pilot only in Marty & Beck Mk-7 zero/zero ejection seat

Dimensions:

Fighter Mode:

Length 14.23 meters

Wingspan 14.78 meters (fully extended)

Height 3.84 meters

Battroid Mode:

Height 12.68 meters

Width 7.3 meters

Length 4.0 meters

Empty weight: 13.25 metric tons;

Standard T-O mass: 18.5 metric tons;

MTOW: 37.0 metric tons

Power Plant:

2x Shinnakasu Heavy Industry/P&W/Roice FF-2001 thermonuclear reaction turbine engines, output 650 MW each, rated at 11,500 kg in standard or in overboost (225.63 kN x 2)

4 x Shinnakasu Heavy Industry NBS-1 high-thrust vernier thrusters (1 x counter reverse vernier thruster nozzle mounted on the side of each leg nacelle/air intake, 1 x wing thruster roll control system on each wingtip);

18 x P&W LHP04 low-thrust vernier thrusters beneath multipurpose hook/handles

Performance:

Battroid Mode: maximum walking speed 160 km/h

Fighter Mode: at 10,000 m Mach 2.71; at 30,000+ m Mach 3.87

g limit: in space +7

Thrust-to-weight ratio: empty 3.47; standard T-O 2.49; maximum T-O 1.24

Design Features: 3-mode variable transformation; variable geometry wing; vertical take-off and landing; control-configurable vehicle; single-axis thrust vectoring; three "magic hand" manipulators for maintenance use; retractable canopy shield for Battroid mode and atmospheric reentry; option of GBP-1S system, atmospheric-escape booster, or FAST Pack system

Transformation:

Standard time from Fighter to Battroid (automated): under 5 sec.

Min time from Fighter to Battroid (manual): 0.9 sec.

Armament:

1 x internal Mauler RÖV-20 anti-aircraft laser cannon, firing 6,000 pulses per minute

1 x Howard GU-11 55 mm three-barrel Gatling gun pod with 200 rds fired at 1,200 rds/min

4 x underwing hard points for a wide variety of ordnance, including

12x AMM-1 hybrid guided multipurpose missiles (3/point), or

12x MK-82 LDGB conventional bombs (3/point), or

6x RMS-1 large anti-ship reaction missiles (2/outboard point, 1/inboard point), or

4x UUM-7 micro-missile pods (1/point) each carrying 15 x Bifors HMM-01 micro-missiles, or a combination of above load-outs

Optional Armament:

Shinnakasu Heavy Industry GBP-1S ground-combat protector weapon system, or

Shinnakasu Heavy Industry FAST Pack augmentative space weapon system

The kit and its assembly:

This is one more 1:100 Bandai VF-1, IMHO a design masterpiece created by Shoji Kawamori and one of my favorite mecha designs ever, because it was created as an late 70ies style jet fighter that could transform into a robot in a secondary role, a simple, purposeful military vehicle.

I’ve built more than a dozen of these kits over the last 25 years, so I know it pretty well, especially its weaknesses. But the small Valkyries, originally manufactured by IMAI and now still on sale through Bandai (they pop up every 5 years when another Macross anniversary occurs…) are simple and easy to modify, and to me a kind of clean canvas for weird and colorful ideas. The VF-1 carries a huge creative potential.

This VF-1A was built almost OOB. I just made some minor mods, partly based on the design benchmark (see below). These include a pilot figure for the cockpit – actually a modified, HO (1:87) scale sitting soldier from Roco Minitanks; 1:100 pilot figures are hard to find, but I found that these squatted figures fill the cockpit and the relatively flat seat pretty well. A few characteristic blade antennae (four under the lower front fuselage and two behind the cockpit) were added.

Since this VF-1A was to be displayed in flight, the landing gear could be omitted and the covers mounted in closed position. The underwing ordnance was omitted and the pylons’ attachment points faired over. The handgun, hanging under the fuselage in flight mode, was replaced by a smoke generator and an associate tank - actually a drop tank from an Airfix 1:72 Saab Viggen. It also holds an adapter for a scratch-built display, which is taller and less obvious than the OOB offering.

Painting and markings:

This is where the actual work took place – and this Canadian VF-1 is a personal interpretation of a fictional custom Valkyrie profiles by CrazyCanuck, posted at macross.net in the fan art section (check

www.macross2.net/m3/forfansonly/crazycanuck/layouts-snowb... for reference).

There’s hardly a livery that does not suit the elegant VF-1, and I found the Snowbirds scheme very pleasing. I also liked the idea that the VF-1 would be used all over the world, with national adaptations like a Royal Navy(!) variant backed by official publications and source books. So, why not a Canadian Valkyrie?

For easy painting the kit was built in separate section (cockpit, fuselage with wings and butterfly tail, legs, head and the smoke generator), and the use of white AND red –together with yellow IMHO the most challenging tone to work with on models – scared me.

Due to the kit’s tininess I painted everything by brush with enamels. The basic tones are Humbrol 130 and 19, the latter turned out to be a very good representation of the Snowbirds’ deep scarlet red tone.

The cheatline all long the VF-1, literally from nose to feet, was created with decals. Most come from an 1:72 Snowbirds CL-141 Tutor sheet from Victoria productions in Canada (excellent stuff!), part of the trim had to be improvised and extended with generic blue and white decal sheet.

In contrast to the CrazyCanuck illustration, I decided to add Macross insignia instead of Canadian roundels – keeping in line with similar “nationalized” VF-1s in official source books. Some Canadian symbols like the flags on the fins, the roundels in the round depressions at the ankles and the huge Canadian flag on the starboard wing (a personal addition, the maple leaf is a decal while the rest was done with paint) were adopted, though, and they suit the Valkyrie well.

After basis painting was done I followed the engraved panel lines with a fine, very soft pencil. An experiment, because I just wanted a subtle emphasis esp. on the white surfaces, not the 2D/comic-style full black panel lines of former builds.

No other weathering was done, since this VF-1 was to look clean and bright. Finally, everything was sealed with a coat of gloss acrylic varnish, and the characteristic clear parts (visor on the head, position lights on the legs, laser muzzles, position lights) were laid out with acrylic silver and filled out with various shades of clear paint. Just small things, but they enhance the overall impression of the simple model kit a lot.

After a long time it’s a good feeling to build an VF-1 again, and creating a rather bright one was fun, even though the paint job was challenging. But patience and clever improvisation paid out: that Snowbird really stands out, the Snowbirds livery suits the VF-1 well! :-D

Some background:

The VF-1 was developed by Stonewell/Bellcom/Shinnakasu for the U.N. Spacy by using alien Overtechnology obtained from the SDF-1 Macross alien spaceship. It was preceded into production by an aerodynamic proving version of its airframe, the VF-X. Unlike all later VF vehicles, the VF-X was strictly a jet aircraft, built to demonstrate that a jet fighter with the features necessary to convert to Battroid mode was aerodynamically feasible.

However, the fighter remained active in many second line units and continued to show its worthiness years later, e. g. through Milia Jenius who would use her old VF-1 fighter in defense of the colonization fleet - 35 years after the type's service introduction!

General characteristics:

Equipment Type: all-environment variable fighter and tactical combat battroid

Government: U.N. Spacy, U.N. Navy, U.N. Space Air Force

Accommodation: pilot only in Marty & Beck Mk-7 zero/zero ejection seat

Dimensions:

Fighter Mode:

- Length 14.23 meters

- Wingspan 14.78 meters (fully extended)

- Height 3.84 meters

Battroid Mode:

- Height 12.68 meters

- Width 7.3 meters

- Length 4.0 meters

Empty weight: 13.25 metric tons

Standard T-O mass: 18.5 metric tons

MTOW: 37.0 metric tons

Powerplant:

2x Shinnakasu Heavy Industry/P&W/Roice FF-2008 thermonuclear reaction turbine engines,

output 650 MW each, rated at 11,500 kg in standard or in overboost (225.63 kN x 2)

4x Shinnakasu Heavy Industry NBS-1 high-thrust vernier thrusters (1 x counter reverse

vernier thruster nozzle mounted on the side of each leg nacelle/air intake,

1x wing thruster roll control system on each wingtip)

18x P&W LHP04 low-thrust vernier thrusters beneath multipurpose hook/handles

Performance:

Battroid Mode: maximum walking speed 160 km/h

Fighter Mode: at 10,000 m Mach 2.71; at 30,000+ m Mach 3.87

g limit: in space +7

Thrust-to-weight ratio: empty 3.47; standard T-O 2.49; maximum T-O 1.24

Design features:

3-mode variable transformation; variable geometry wing; vertical take-off and landing; control-configurable vehicle; single-axis thrust vectoring; three "magic hand" manipulators for maintenance use; retractable canopy shield for Battroid mode and atmospheric reentry; option of GBP-1S system, atmospheric-escape booster, or FAST Pack system

Transformation:

Standard time from Fighter to Battroid (automated): under 5 sec.

Minimum time from Fighter to Battroid (manual): 0.9 sec.

Armament:

1x internal Mauler RÖV-20 anti-aircraft laser cannon, firing 6,000 pulses per minute

1x Howard GU-11 55 mm three-barrel Gatling gun pod with 200 rds fired at 1,200 rds/min

4x underwing hard points for a wide variety of ordnance, including

- 12x AMM-1 hybrid guided multipurpose missiles (3/point), or

- 12x MK-82 LDGB conventional bombs (3/point), or

- 6x RMS-1 large anti-ship reaction missiles (2/outboard point, 1/inboard point), or

- 4x UUM-7 micro-missile pods (1/point), each carrying 15x Bifors HMM-01 micro-missiles,

or a combination of above load-outs

Optional Armament:

Shinnakasu Heavy Industry GBP-1S ground-combat protector weapon system, or

Shinnakasu Heavy Industry FAST Pack augmentative space weapon system

The kit and its assembly:

Another submission to the 2017 "Science Fiction" Group Build at whatifmodelers.com, and once more the eventual realization of a long- plan: a VF-1 in a dazzle scheme! To my surprise, I have never seen this, neither in the canonical sources (except for a VF-5000 with an all-grey splinter scheme, similar to the experimental US Keith Ferris schemes), nor on a model? Well, time to try this stunt ...again; I had actually built a VF-1D as a non-transformable supersonic trainer many years ago, and applied a livery inspired by the Keith Ferris schemes, but with very soft blue-grey tones, so that the disruptive effect of the underlying splinter would hardly "work". So, this is a second approach to the theme, and a more visually-oriented one.

This vintage ARII VF-1J fighter kit was built OOB, with the landing gear tucked up. This kit showed its age, though, the moulds seem to be well worn because the sprues showed considerable flash and other soft spots.

Anyway, the model received my usual additions of some blade antennae, a pilot figure and a custom display stand in/under the ventral cannon pod. The ordnance is standard, too, the full load of a dozen AAM-1 missiles is OOB. The only true additions are a small, scratched fairing for an IRST sensor under the nose, seen in a source book profile of an U.N.S.A.F. VF-1, and RHAWS antennae at the top of the fins.

Painting and markings:

This was the bigger part of the work, and a creative one, too. I did not simply want to copy an existing scheme, e .g. the Keith Ferris schemes that had been tested on some US aircraft.

The scheme was to be disruptive, confusing and also decorative - true camouflage was rather a secondary requirement, but welcome. Creating such a scheme from scratch is not as easy as it sounds, because you have to avoid collisions of the same color, the overall look needs some balance, and the scheme and its single shard shapes were to somewhat correspond with the Valkyrie’s outlines, too.

Since I did not dare to improvise this directly on the kit, and because I wanted to use more than three tones for the paint scheme, I actually created a VF-1 4-side view on a sheet of paper and started painting it out with colored pencils!

This was actually very helpful and I ended up with a four-tone scheme, rooted in pure black and white and somewhat inspired by pre-WWII dazzle schemes for ships.

Consequently the tones are black (I used a tone called Tar Black, Revell 6, which is actually a very dark grey), a dark/medium grey (Humbrol 27), light grey (Humbrol 64) and white (again, not the pure tone, but rather a very light grey, mixed from 95% Humbrol 130 and 5% Humbrol 64).

The pattern consists of large color sections, geometrical shapes, wedges and a few stripes at some intersections. It (unintentionally) reminds of certain late Su-27 schemes in Russian services, as well as US aggressors that carry similar outfits, e. g. some F-18s of USN’s VFC-12. But these are rather geometrical shapes added to a camouflage/grey background, and not as integral as my design.

The scheme was applied mostly free-handedly with brushes and a mix of enamels and acrylic paint. From certain angles it actually breaks up the VF-1's outlines well, esp. its silhouette, and at a quick glance it is actually hard to tell the Valkyrie’s orientation or direction of flight. In order to add some more onlooker confusion, I also added a fake cockpit with a white pilot helmet (cut from decal sheet) on top of the fuselage.

All other markings are rather minimal and subdued. Lacking different contrasting color options, I used yellow decals for the “U.N. Spacy” tags on the legs and the upper starboard wing. The “kite” insignia in grey and white were printed at home, while the tactical code comes from a Tamiya 1:100 Thunderchief. The chequered stripe on top of the fin is a generic decal, and blank, beige decal sheet was used for the wings’ and fins’ leading edges.

The rest came mostly from various OOB VF-1 sheets.

The ordnance was painted authentically, too. The AMM-1’s became all-white with black and red trim, the gun pod was painted Dark Sea Grey (Humbrol 123), blending into the overall color palette of this dazzle VF-1.

Except for a black ink wash, emphasizing the engraved panel lines, not much other weathering was done. Finally, the kit was sealed with matt acrylic varnish.

An… interesting result, and I am surprised how much the dazzle scheme changes the overall look of the VF-1, despite no fundamental changes to the airframe as such. Building was relatively simple, but the kit is not complex – just pretty old. Anyway, this updated aggressor bird makes a nice addition to the VF-1 collection, a worthwhile effort. A true eye catcher, I’d say.

Some background:

The VF-1 was developed by Stonewell/Bellcom/Shinnakasu for the U.N. Spacy by using alien Overtechnology obtained from the SDF-1 Macross alien spaceship. Its production was preceded by an aerodynamic proving version of its airframe, the VF-X. Unlike all later VF vehicles, the VF-X was strictly a jet aircraft, built to demonstrate that a jet fighter with the features necessary to convert to Battroid mode was aerodynamically feasible. After the VF-X's testing was finished, an advanced concept atmospheric-only prototype, the VF-0 Phoenix, was flight-tested from 2005 to 2007 and briefly served as an active-duty fighter from 2007 to the VF-1's rollout in late 2008, while the bugs were being worked out of the full-up VF-1 prototype (VF-X-1).

This particular fighter sported the squadron’s typical striped high visibility markings over a standard gloss light gray base on wings and legs, but unlike normal machines of this unit, with deep yellow and black markings, was, together with two sister ships, assigned to the unit’s staff flight. Each of these VF-1’s carried the unit markings and additional flight leader decoration on the noses in non-regular colors: turquoise on “001”, violet on “002” and pink on “003” – giving them one of the most distinctive and attractive paint schemes during the Space War.

General characteristics:

All-environment variable fighter and tactical combat Battroid,

used by U.N. Spacy, U.N. Navy, U.N. Space Air Force

Accommodation:

Pilot only in Marty & Beck Mk-7 zero/zero ejection seat

Dimensions:

Fighter Mode:

Length 14.23 meters

Wingspan 14.78 meters (at 20° minimum sweep)

Height 3.84 meters

Battroid Mode:

Height 12.68 meters

Width 7.3 meters

Length 4.0 meters

Empty weight: 13.25 metric tons;

Standard T-O mass: 18.5 metric tons;

MTOW: 37.0 metric tons

Power Plant:

2x Shinnakasu Heavy Industry/P&W/Roice FF-2001 thermonuclear reaction turbine engines, output 650 MW each, rated at 11,500 kg in standard or in overboost (225.63 kN x 2)

4x Shinnakasu Heavy Industry NBS-1 high-thrust vernier thrusters (1 x counter reverse vernier thruster nozzle mounted on the side of each leg nacelle/air intake, 1 x wing thruster roll control system on each wingtip);

18x P&W LHP04 low-thrust vernier thrusters beneath multipurpose hook/handles

Performance:

Battroid Mode: maximum walking speed 160 km/h

Fighter Mode: at 10,000 m Mach 2.71; at 30,000+ m Mach 3.87

g limit: in space +7

Thrust-to-weight ratio: empty 3.47; standard T-O 2.49; maximum T-O 1.24

Design Features:

3-mode variable transformation; variable geometry wing; vertical take-off and landing; control-configurable vehicle; single-axis thrust vectoring; three "magic hand" manipulators for maintenance use; retractable canopy shield for Battroid mode and atmospheric reentry; option of GBP-1S system, atmospheric-escape booster, or FAST Pack system

Transformation:

Standard time from Fighter to Battroid (automated): under 5 sec.

Min. time from Fighter to Battroid (manual): 0.9 sec.

Armament:

1x internal Mauler RÖV-20 anti-aircraft laser cannon, firing 6,000 pulses per minute

1x Howard GU-11 55 mm three-barrel Gatling gun pod with 200 RPG, fired at 1,200 rds/min

4x underwing hard points for a wide variety of ordnance, including

12x AMM-1 hybrid guided multipurpose missiles (3/point), or

12x MK-82 LDGB conventional bombs (3/point), or

6x RMS-1 large anti-spaceship reaction missiles (2/outboard point, 1/inboard point), or

4x UUM-7 micro-missile pods (1/point) each carrying 15 x Bifors HMM-01 micro-missiles, or a combination of above load-outs and other guided and unguided ordnance

The kit and its assembly:

It has been a while that I tackled one of these vintage ARII kits, and this time the build became a relief project from Corona cabin fever and a major conversion project. This garish Valkyrie is fictional but was heavily based on a profile drawing published in the Macross source book “Variable Fighter Master File VF-1 Valkyrie” of SVF-51 (originally with deep yellow accents)

The kit is a VF-1J, but the head unit was replaced with an “A” variant from the spares box. It was basically built OOB, with the landing gear down. The only mods are some standard blade antennae, an IRST fairing under the nose and the fins’ tops were slightly modified, too. The pylons were modified to take the new ordnance – optically guided glide bombs à la AGM-62 “Walleye”, scratched from obscure AAMs from a Kangnam MiG-29 and painted in the style of early USAF GBUs.

The gun pod was also modified to accept a scratched wire display in its tail and holds the Valkyrie in flight. The pilot figure was just a guest for the in-flight photo sessions, later the canopy was glued to a mount in open position.

Painting and markings:

I had wanted to apply this spectacular scheme onto a model for a while, but could not get myself to use yellow, because I already have a similar VF-1 in USN high-viz livery and with yellow and black decorations. I considered other tones, and eventually settled for pink – as an unusual choice, but there are canonical VF-1s with such an exotic tone in their liveries.

The rest was straightforwardly adapted from the profile, even though the creation of the trim lines without masking was a challenge. I used various stripes of generic decal material in black and white to create shapes and demarcation lines, filling up larger areas with paint. The overall basic tone is Humbrol 40 (glossy FS 36440), plus Humbrol 200 (Pink), 22 (Gloss Black) and Revell 301 (Semi-matt White) for the flaps’ upper surfaces and the landing gear. The cockpit became medium grey with a black seat and brown cushions. The ventral gun pod became aluminum.

After basic painting, the model received an overall washing with thinned black ink to emphasize the engraved panel lines. A little post-shading was done, too, for a more graphic look, and then the decals (including most trim lines, e. g. in black on the wings and the nose, in white on the fins) were applied. The following basic markings came from various 1:100 VF-1 sheets, the tail code letters came from an RAF SEAC Spitfire from WWII. The modex codes consist of single digit decals (2mm size, TL Modellbau).

Finally, after some detail painting and highlights with clear paint had been added, the VF-1 was sealed with a semi-gloss acrylic varnish.

A small and quick interim project, realized in just a few days – most time passed while waiting for the gloss Humbrol enamels to cure properly… There are certainly better VF-1 models than the vintage ARII kits, but I just love them because they are small, simple and easy to modify. Staying close to the benchmark profile was quite a challenge but worked out fine, even though I had hoped that the pink would stand out a little more. But the plan to change the unit’s ID color for a staff flight aircraft turned out well, even though some compromises had to be made.