View allAll Photos Tagged mesh
WR625G is a gigabit dual-band mesh WIFI router that supports AC 1200 dual-frequency, it has a 2.4g 2X2 and 5G 2X2 omnidirectional multi-band high-gain antenna, and 802.11AC MU-MIMO supports Wave2. The multi-oscillator high-gain omnidirectional antenna has a strong ability to pass through the wall and has a wider coverage, making the already strong signal more powerful, signal coverage is wider and data transmission is smoother. Mu-Mimo multi-device transceiver technology has low latency and stable connection of multiple devices at the same time to ensure a good experience of using multiple devices.
WR625G mesh wifi router is an ad-hoc routing network distributed Mesh router. Mesh WIFI routers with multiple ethernet ports are perfectly matched and work together to eliminate signal dead spots, easily satisfying family scenes such as large flat, duplex, and villa, so that good signals can be achieved everywhere. Wherever you go, there is a good signal automatic switching network, no wiring, support 802.11k/ V protocol, when the device moves between multiple Mesh routes, it can automatically switch to a better Wi-Fi network. The switching process constantly net, the whole house seamless roaming.
Hardware Specification
CharacteristicWR625G-M10
Dimensions166*120*80mm
Interface1*10/100/1000 Base-Tx Ethernet WAN port
2*10/100/1000 Base-Tx Ethernet LAN port
1*DC12V power port
1*Reset port
WIFI Speed2.4G WiFi:2*2 (Speed 300Mbps)
5G WiFi:2*2 (Speed 866.7Mbps)
Frequency2.4G WiFi frequency:2.4GHz～2.4835GHz
5G WiFi frequency:5.150GHz～5.85GHz
Antennabuilt-in 4*5dBi high gain omnidirectional antennas
Wireless Transmit Power2.4GHz:
11b 11Mbps：19dBm；
11g 6Mbps ：20dBm；
11g 54Mbps：17dBm；
11n MCS0-HT20：19dBm；
11n MCS7-HT20：16dBm；
11n MCS0-HT40：19dBm；
11n MCS7-HT40：16dBm
5GHz:
11a 6Mbps ：20dBm；
11a 54Mbps ：17dBm；
11n MCS0-HT20：18dBm；
11n MCS7-HT20：16dBm；
11n MCS0-HT40：18dBm；
11n MCS7-HT40：16dBm；
11ac MCS0-VHT20 ：18dBm；
11ac MCS8-VHT20 ：15dBm；
11ac MCS0-VHT40 ：18dBm；
11ac MCS9-VHT40 ：15dBm；
11ac MCS0-VHT80 ：18dBm；
11ac MCS9-VHT80 ：15dBm；
Receiver Sensitivity2.4GHz:
11b 1Mbps：-96 dBm；
11b 11Mbps：-90 dBm；
11g 6Mbps：-91 dBm；
11g 54Mbps：-75 dBm；
11n MCS7-HT20：-70 dBm；
11n MCS7-HT40：-67 dBm；
5GHz:
11a 6Mbps：-91 dBm；
11a 54Mbps ：-75 dBm；
11n MCS7-HT20：-72 dBm；
11n MCS7-HT40：-69 dBm；
11ac MCS8-VHT20：-65 dBm；
11ac MCS9-VHT40：-60 dBm；
11ac MCS9-VHT80：-58 dBm
CPUMTK CPU MT7621A MIPS dual core 880MHz
ChipsetMT7621+MT7613B+MT7603
Memory128MB DDR3 RAM
Flash16MB
Power supplyDC12V/1A
Operating Temperature-10～50℃
Storage Temperature-40～70℃
Operating Humidity5～95％(non condensation)
Consumption＜10W
CertificationCCC, ROHS
Software Specification
CharacteristicWR625G-M10
Network protocolPPPoE
DHCP client
DHCP server
Internet modePPPoE
Static IP
DHCP
Wireless2.4G，5G
Support national channel selection
Signal strength selection
WI-FI timing function
System serviceALG (IPsec, L2TP, FTP)
Port Mapping
DMZ host
Remote WEB
Telnet server
DDNS
SecurityIP filter
MAC filter
URL filter
Port filter
QoSNetwork speed statistics for connected devices
MAC-based network traffic rate limit
Time synchronizationTime-zone selection
NTP client
Can add candidate NTP server
ManagementSetup Wizard for quick and easy configuration
Management password modification
Route restart, restore factory
Firmware upgrade (retain the original configuration)
System logSystem log
1 hank of Tess' Designer Yarns Silk and Ivory in colorway Twilight. One ball (maybe two) of Rowan Kidsilk Night in Moonlight. Very celestial. The Kidsilk has subtle sparkles in it. Pattern from Vogue Knitting Fall 2007 special 25th anniversary issue.
Diane Oversize Cami, Rigged Mesh, comes in 3 standard sizes (S,M,L), HUD to change color and comes with 10 colors to choose from and 2 metal colors for the back heart
Available at: marketplace.secondlife.com/p/TASHI-Diane-Oversize-Cami/68...
For questions please contact Shinya Tandino
Thank you for shopping at Tashi
Pic by: Coqueta Veeper (coqueta.georgia)
Model: Shelby Loudwater
Craigslist CEO Jim Buckmaster entertains mesh organizer Mark Evans and the audience with his wit and laconic quips during a keynote conversation on day two of mesh, Canada's leading web conference.
Read more about my adventures in Mesh here
renoobed.wordpress.com/2012/04/14/mesh-death-of-the-upskirt/
Oceane's Mix & Match Catwa Lashes. Each set has 5 upper and 5 lower lashes so you can create your own style! Available now at the Vintage Fair, in my stores and at Marketplace!
Description:
Flour bolting mesh
The synthetic fibers, such as polyamide (nylon), polyester, polyethylene and polypropylene are mostly selected for the meshes. They are suitable for the filtering, screening and straining in the field of foodstuffs industry, chemical industry, automobile industry and medical engineering. We can mainly supply you the meshes made by polyester and polyamide and plain-woven for light, normal and heavy duty by selecting different diameter of the monofilament. The filament can be doubled, non-crimped, half-crimped or double crimped. The meshes can be woven in plain, twill or Dutch, and will be bleached and set after weaving.
Recently I've been learning about lighting, on how they can add focus to your subject and bring out a different perspective in your shots.
Available at Sweet Distractions in Second Life:
marketplace.secondlife.com/stores/85278
maps.secondlife.com/secondlife/Greenware/192/64/32
I built this apartment with prims in secondlife, converted&and exported it into a .dae file and uploaded it into cloudparty. Since now i have just textured about 40% so do not wonder if you see lots of untextured parts. Just as a test i exported each of the prims as single mesh!!! Hahahe! :) This resulted in one mesh object in cloudparty using 136 material slots. Huahuahuah. For sure UVW mapping would use much less resources but since this is only a test i did it this way.
In both CP and in SL i set the same camera position to compare.
(huge picture chart: 1837 x 6387pixel) ZOOM IN!
Get Rolling Pin MESH from www.greenstuffworld.com/en/textured-rolling-pins/515-roll... by Green Stuff World.
Rolling Pin MESH
********************************
clayroller puttyroller kneadtool rollingpin pvcpipes acrylicrod texturedroller texturedrollingpin embossedrollingpin factory factoryground rack gril grill grille mesh Meshes grid grate grating
This is my best effort so far using a mesh viewer in a mesh dress. Um, help?!
I'm using the Firestorm mesh viewer beta (new installation, not overriding a previous version) and have cleared the cache manually and logged out and in a couple of times. I've cleaned up and de-fragged the computer but don't know how to properly render the world again.
Wearing:
It doesn't matter
mesh là gì - Nguyên Muôn Trong kinh doanh thương mại hay nguyên cứu về lưới inox, vải nylon, vệt dệt có mắt lưới.
Playing with the Hemesh and Convex Hull by Lee Byrons library. Starting Point is the Hemesh Voronoi example. The voronoi cells are subdivided and then slices of the vertices are sent to the convex hull algorithm.
They are abviously inspired by jtnimoys awesome work for the tron movie.
Check it out at Openprocessing:
Matrix III, 2019
Approximately 6 tonnes of 6 mm mild steel reinforcing mesh
This vast cloud is a mesmerising visual labyrinth, hewn from an ordinary industrial material. 98% recycled, the steel mesh – commonly used to reinforce concrete walls – is transformed into a complex phenomenon, by way of hundreds of thousands of spot welds done by hand. Designed especially for this gallery, 21 suspended room-size cages intersect, surrounding a small concentrated chamber. This void at the core is what Gormley calls “the space of dreaming”, and is equivalent to the average size of a European new-build bedroom. Looking up at this structure, our ability to perceive distance is challenged: our eyes struggle to decide what is close or far, in front or behind.
The certainty and solidity of the three-dimensional world is undermined. Gormley has described ‘Matrix III’ as “the ghost of the environment we’ve all chosen to accept as our primary habitat”.
[Royal Academy]
Taken at Antony Gormley
(21 September — 3 December 2019)
The exhibition will explore Gormley’s wide-ranging use of organic, industrial and elemental materials over the years, including iron, steel, hand-beaten lead, seawater and clay. We will also bring to light rarely-seen early works from the 1970s and 1980s, some of which led to Gormley using his own body as a tool to create work, as well as a selection of his pocket sketchbooks and drawings.
Throughout a series of experiential installations, some brand-new, some remade for the RA’s galleries, we will invite visitors to slow down and become aware of their own bodies. Highlights include Clearing VII, an immersive ‘drawing in space’ made from kilometres of coiled, flexible metal, and Lost Horizon I, 24 life-size cast iron figures set at different orientations on the walls, floor and ceiling – challenging our perception of which way is up.
Perhaps best-known for his 200-tonne Angel of the North installation near Gateshead, and his project involving 2,400 members of the public for Trafalgar Square’s the Fourth Plinth, Antony Gormley is one of the UK’s most celebrated sculptors.
[Royal Academy]
Read more about my adventures in Mesh here
renoobed.wordpress.com/2012/04/14/mesh-death-of-the-upskirt/