View allAll Photos Tagged logsplitter
Larry was finally able to go out today and play with his big gift from Santa!
A log splitter!
We're going to be able to keep the fireplace going all winter long! 8-)
A log splitter driven from the tractor's PTO. Harry Ferguson created a range of implements that made the farmer's life easier and lessened the burden of farm work. They also had the potential to lessen the number of fingers he had!
Getting busy doing the firewood for next year! This logsplitter will work vertically or horizontally with 27 tons of pressure. Still a lot of work, though.
While driving down the road today I caught a glimpse of this 1950s GMC that was still hard at work splitting logs for it's owner, who was so inebriated he could barely stand. Image property of BTSphotos.com. All rights reserved.
Iāve been splitting kindling this morning and sat down to enjoy these glorious fall days. It has been like this for a week, highs around 70f (22C) and full sunshine. Warmer and drier winter predicted but we need more snow in the mountains after a very dry summer.
One of our new toys at Hackerspace Hack42; a rotating 'corkscrew' type log splitter, called a "Unicorn".
Wheelchair destroyed in a logsplitter by Ted & The Logsplitters at "the 13th floor club" at "Garage. Oslo, Norway November 28th 2008.
I made this stump bucket for a skid steer loader from my scrap metal supply. The tops of the teeth are made from a car spring which is hardened. The thick scraper across the bottom front was from part of a city snow plow section that is not only thick but hardened. I ran into a concrete wall with the bucket and it did not affect it all. I removed a 12" stump plus the roots with this. It was about an 8 foot circle of wood and roots. I copied this bucket from an ebay version.
My usual bucket is too wide and has no teeth and cannot dig very well in clay or frozen ground. I hope this bucket will solve these problems.
Front view: flickr.com/photos/21702692@N05/2104095486/
I have also made a backhoe attachment, a log splitter and a boom grapple for my Bobcat. They are heavy and require some work to attach. The boom grapple design can be seen on the internet, possibly ebay too if it is still on there. It was invented in Florida to load hurricane debris into high sided trucks. It extends the upper reach of the loading ability. My design is only slightly different. See the following for the boom grapple I made: flickr.com/photos/21702692@N05/2156494569/
The backhoe design is similar to one sold by Northern Tools but mine has a bigger bucket: flickr.com/photos/21702692@N05/2199209170/
Logsplitter: flickr.com/photos/21702692@N05/2199264504/
Uncle Peter (my uncle in-law) tells me has been splitting logs for 70 years and despite a broken foot bone, split the pile on the left (and then some) in around an hour. Basically, faster than I could wheelbarrow the stuff away and stack it in the wood shed to season (right).
The lumber was from a huge copper beech planted as a sapling by his father 40 years ago, right in front of the family home. He told me his father hadn't learnt the lesson as his grandfather had a copper beech removed from a similar spot 50 years ago.
Uncly P is a walking 80 year old miracle. Ravaged by arthritis, he still swings an axe with subcentimetre accuracy. Despite most joints giving out, he still catches the bus downtown every day to his office, where he runs his own company. An old-school geologist, he still works out in the field every summer. He admits he is slowing a little and isn't doing 16hr days in the Yukon anymore.
His passion and verve are quite something; he still has a twinkle in his eye, especially when you get him talking shop. However, I can't help shake the feeling that he has literally worn himself out.
Attaches to the front of the Bobcat on the end of a backhoe attachment with the bucket removed. The lever attaches to the pedal in the cab. Somebody gave me the I-beam so I decided it was time to make a log splitter.
This is a one of a kind! With a little help from Northern Tool, I was able to combine an old 12hp Jacboson Lawn Tractor and a Case-Ingersoll log Splitter Attachment. This unit will split in both directions.
Houtoogst op Vlieland
De afgelopen weken werd er druk gewerkt in de Vlielander bossen, de eilanders zijn doende met de jaarlijkse houtoogst. Op Vlieland kan bij Staatsbosbeheer hout op stam gekocht worden, en vanwege de stijgende gasprijzen schakelen steeds meer Vlielanders over op een houtkachel. Het kachelhout mag vanaf september tot februari gezaagd worden en in deze periode kan vaak een kettingzaag gehoord worden.
Werd er in de winter van 2001 nog een 175 kubieke meter hout verkocht aan omstreeks 30 huishoudens, inmiddels is dit gestegen naar bijna 600 kubieke meter aan 100 huishoudens. Voor het hout op stam brengt Staatsbosbeheer 10 euro per m3 in rekening. Daarna moet de koper zelf de bomen omzagen, uitsnoeien, kloven en naar huis brengen om het daar op te stapelen.
Iemand die dit proces geheel geoptimaliseerd heeft is de Vlielander Louis de Graaf. De Graaf heeft een houtgestookte cv-ketel en warmwatervoorziening en stookt het jaar rond hout en heeft daarvoor rond de 25 m3 hout nodig. Om dit hout te koven heeft hij de hulp ingeroepen van de Vlielandse uitvinder Frans van Baaren. Van Baaren stookt ook al jaren hout en klooft dit hout met een zelfgebouwde kloofmachine. Frans van Baaren heeft deze machine de afgelopen jaren steeds verder geperfectioneerd tot een perfect werkend apparaat, waarbij vrijwel alleen spullen van de schroothoop zijn gebruikt. Zo is de tank voor de hydraulische olie gemaakt van een biervat, het snijmes van een pantserplaat van een doel van militaire oefenterrein op de Vliehors en is het voorzien van een lift om de zware houtblokken voor het mes te krijgen.
Een aardig filmpje van deze supersnelle en krachtige kloofmachine vindt u hier.
Werd voorheen het gekloofde hout nog met de hand op een wagen geladen, dit jaar heeft Louis de Graaf ook deze handeling ook weten te vergemakkelijken. Aan de wal kocht hij een afgedankte transportband en heeft deze op wielen gezet en van een hydromotor voorzien die weer aangedreven wordt door de kloofmachine, waardoor nu het hout meteen in een grote container wordt gebracht. De container is afzetbaar van de trailer, dus als deze vol is kan hij achter zijn woonhuis worden afgezet, waarna het hout enkel nog gestapeld hoeft te worden.
Op de foto bedient Frans van Baaren de kloofmachine en voert Louis de Graaf op rechts het hout aan.
Houtoogst op Vlieland
De afgelopen weken werd er druk gewerkt in de Vlielander bossen, de eilanders zijn doende met de jaarlijkse houtoogst. Op Vlieland kan bij Staatsbosbeheer hout op stam gekocht worden, en vanwege de stijgende gasprijzen schakelen steeds meer Vlielanders over op een houtkachel. Het kachelhout mag vanaf september tot februari gezaagd worden en in deze periode kan vaak een kettingzaag gehoord worden.
Werd er in de winter van 2001 nog een 175 kubieke meter hout verkocht aan omstreeks 30 huishoudens, inmiddels is dit gestegen naar bijna 600 kubieke meter aan 100 huishoudens. Voor het hout op stam brengt Staatsbosbeheer 10 euro per m3 in rekening. Daarna moet de koper zelf de bomen omzagen, uitsnoeien, kloven en naar huis brengen om het daar op te stapelen.
Iemand die dit proces geheel geoptimaliseerd heeft is de Vlielander Louis de Graaf. De Graaf heeft een houtgestookte cv-ketel en warmwatervoorziening en stookt het jaar rond hout en heeft daarvoor rond de 25 m3 hout nodig. Om dit hout te koven heeft hij de hulp ingeroepen van de Vlielandse uitvinder Frans van Baaren. Van Baaren stookt ook al jaren hout en klooft dit hout met een zelfgebouwde kloofmachine. Frans van Baaren heeft deze machine de afgelopen jaren steeds verder geperfectioneerd tot een perfect werkend apparaat, waarbij vrijwel alleen spullen van de schroothoop zijn gebruikt. Zo is de tank voor de hydraulische olie gemaakt van een biervat, het snijmes van een pantserplaat van een doel van militaire oefenterrein op de Vliehors en is het voorzien van een lift om de zware houtblokken voor het mes te krijgen.
Een aardig filmpje van deze supersnelle en krachtige kloofmachine vindt u hier.
Werd voorheen het gekloofde hout nog met de hand op een wagen geladen, dit jaar heeft Louis de Graaf ook deze handeling ook weten te vergemakkelijken. Aan de wal kocht hij een afgedankte transportband en heeft deze op wielen gezet en van een hydromotor voorzien die weer aangedreven wordt door de kloofmachine, waardoor nu het hout meteen in een grote container wordt gebracht. De container is afzetbaar van de trailer, dus als deze vol is kan hij achter zijn woonhuis worden afgezet, waarna het hout enkel nog gestapeld hoeft te worden.
Op de foto bedient Frans van Baaren de kloofmachine en voert Louis de Graaf op links het hout aan.
At Barossa Valley Hire in Nuriootpa.
My grandparents are too weak to chop wood by hand and I would like to 'save their bacon' by using a hydraulic splitter!
At Barossa Valley Hire in Nuriootpa.
My grandparents are too weak to chop wood by hand and I would like to 'save their bacon' by using a hydraulic splitter!
At Barossa Valley Hire in Nuriootpa.
My grandparents are too weak to chop wood by hand and I would like to 'save their bacon' by using a hydraulic splitter!
Same image changed to duotone and texture added (my own). Image property of BTSphotos.com. All rights reserved.
After 20+ years of splitting by hand, my wrists are too banged up to do that anymore. This 3HP, 7 ton electric splitter works well and with a little creativity can be used to split logs up to 16" diameter. Weighing about 100 lbs., it can be moved around relatively easily. Similar models can be purchased locally or from online stores like Amazon.
Log-splitting tool in my kitchen at the new house, left by the tree-surgeon.
Taken with Panasonic 20mm f1.7 lens on Panasonic GX7.
Assassinated by John Wilkes Booth
en.wikipedia.org/wiki/John_Wilkes_Booth
Statue created by Angela Conner in 2011
Matt... the son-in-law... splitting one of the many logs now on
hand as a result of the clean-up after the storm. Matt grew up
basically doing anything that was a physical challenge
(including splitting logs).
Ahhh... youth! Not to mention a Cardinal Fitness membership
and a competitive streak almost as huge as that impressive
upper torso... =)
This particular log... just like all the others before and after it...
never stood a chance!
ā ā ā ā ā ā ā ā ā
Wood chips fly at the largest size...
I'm thankful for Daniel. I'm thankful, of course, that he can fix anything and works hard. I'm thankful that he allows me (even encourages me) to be a stay-at-home mom. And I'm thankful that he's content to live on a small income in a small house.
I'm thankful too that he trusts me, and that he's proven himself trustworthy. I'm thankful that he gives me freedom to play and to experiment. And he even "plays along" with my experiments - from soap-based playdoh to kite aerial photography to painting murals: Even at the age of 40-something it's fun to have someone to "play" with.
---
But more than that, I'm thankful to have a real friend, who genuinely listens to me and genuinely shares with me. I'm thankful to have in him a wise counselor who has the courage to tell me if he thinks I'm spending too much time on the computer, or if he thinks I'm treating one of the kids unfairly. And who tells me, when I doubt it, that I really am a writer and an artist.
And I'm thankful also that Daniel has the humility to listen to me if I think he's spending too much time at work, or if I think he's misinterpreting one of the kids. And that he believes me when I tell him his fix-anything gifts aren't his only gifts, that he's also a good listener and empathizer - not just for me but for lots of people.
I'm glad I get to hang around this guy pretty much every day. I'm glad for the ways we balance one another out. I'm glad for his companionship and encouragement.
And if that weren't enough, he's also chivalrous, handsome and kind!
I often think of how many other guys I might have dated had they asked me, and how many guys I dated who I would have married. Some of those relationships might have turned out OK. But the longer we're married, the more thankful I am that God saved me for Daniel and saved Daniel for me!