View allAll Photos Tagged howtoinstall
Around the perimeter of the deck is a Fiberon Mission Rail System. The railing is made of low maintenance PVC composite
The outdoor ceiling fan hangs from a custom built cedar box to hide the electrical, and to match the pergola.
The highest level of the deck has a cedar pergola with custom rafter tails and trim details. The PVC columns compliment the Azek railing surrounding the deck.
The matching ceiling fans were custom installed in addition to the pergola, to complete the cozy outdoor living space.
The electrical wiring for the outlets on the deck, runs inside of the PVC railing. The outlet is also protected by an exterior outlet cover.
The foundation of the deck sits on an elevated frame, the space can be used for outside storage such as garden hose or pet care
The floor of the deck is made of Fiberon Horizons IPE decking with hidden fasteners and a diagonal decking pattern.
The deck was installed using Fiberon Horizons products. The floor of the deck has grooved panels to look like real wood.
The picture frame boarder completes the look of the deck by giving it a smooth finished look all around.
Hi, thanks for watching our video about how to install the item "Cavitation RF Vacuum Suction EMS Lipo Laser Slim Machine"
In this video we’ll walk you through:
- How to install (whole process)
- How Often can you do this treatment
#cavitation #weightlosstransformation #radiofrequency #Howtoinstall #mychway
________________________________________________________________________
/// PRODUCTS USED IN THIS VIDEO: myChway shop
shop.mychway.com/itm/MS-45T2SB.html
BROWSE MORE CAVITATION + RF MACHINE:
shop.mychway.com/weight-loss-body-shaping_c379
New 60K CAVITATION 2.5 MACHINE ( PRICE: US$105):
shop.mychway.com/itm/MS-12C2.html
eBay items you may be interested:
________________________________________________________________________
Our channel is about Radio Frequency Cavitation RF Machine. We cover lots of cool stuff such as How To, Beauty & Health and more
Check out our channel here:
www.youtube.com/channel/UCAZI...
Don’t forget to subscribe!
CHECK OUT OUR OTHER VIDEOS
www.youtube.com/watch?v=nOF85...
www.youtube.com/watch?v=Tv1rn...
www.youtube.com/watch?v=jkq2G...
We sell the awesome item, check it out here:
shop.mychway.com/itm/MS-22S5....
FIND US AT
GET IN TOUCH
Contact us on sales@mychway.com
FOLLOW US ON SOCIAL
Get updates or reach out to Get updates on our Social Media Profiles!
✔️ Tiktok: mychway
✔️Facebook: mychway_official
✔️Twitter: mychway
✔️Pinterest: mychway
✔️Instagram: mychwayofficial
✔️My WhatsApp: +86 189-487-55929 7*24 HOURS
✔️My Wechat: (+86)-189-487-55929 7*24 HOURS
✔️My SKYPE: mychway
The picture frame boarder completes the look of the deck by giving it a smooth finished look all around.
Products you see on this video are legally purchased from the store to complete the job and not for advertising purposes, neither we are paid for promoting the said products.
Thank you for watching this video,please subscribe and share. #SIMPLETECHBYARMAGARZO
For more DIY, building and construction, home improvement and maintenance video: bit.ly/2Sxglfl
Step Four - Re-Attaching the Top and Bottom Spreader Bars
A special sling tool is supplied with your order. The chair back spreader tool has 2 size holes. The sling tool will only fit through the bigger hole. Place the smaller hole of the chair back spreader bar onto the exposed thread on one side of the sling.
If you can't get the spreader bar to slide down the tool by hand, you may need to use the rubber mallet. Tap the bar into place while spreading the rails apart with the sling tool. Place a nut and washer on the bolt and finger tighten.
Place the sling tool through the larger hole on the other side of the chair back spreader bar. Fit the end of the sling tool onto the opposite exposed stud bolt. Spread the rails apart and push down on the chair back spreader bar until it slides over the threads.
Step Six - Install Swivel Base
Slide the chair support frame onto the swivel base frame. Reinstall the original bolts or replace with 1/-20-1/2" long as suggested. These bolts keep the seat from slipping off the base. Do not overtighten.
Install a plastic rivet, cotter pin or small bolt in this hole at the end of the frame. This is a safety precaution. Should the clamping bolts become loose, the chair frame will not slide off the swivel base frame. Failure to install this component could result in injury to the occupant of the chair.
How to install Laptop Drivers for Dell Toshiba Acer Lenovo HP Compaq with Ease
How to install Laptop Drivers for Dell Toshiba Acer Lenovo HP Compaq Sony. : Recently I purchased a dell laptop and decided to remove windows 8 from it and install windows 7. The installation went smoothly other t...
candytech.in/laptop-drivers-for-dell-toshiba-acer-lenovo-...
Here are the spring rates
Front 7.3kg/mm
Rear 11.5kg/mm
Front -28mm (-1.10″)
Rear -19mm (-0.75″)
Installation Article https://www.agency-power.com/how-to-install-agency-power-lowering-springs-mclaren-570s/
Before
After
...
www.vividracing.com/blog/announcing-new-products-specials...
Insert the chair arms on the second and fourth thread set. Install a washer and nut on each thread and tighten.
Step Six - Install Swivel Base
Slide the chair support frame onto the swivel base frame. Reinstall the original bolts or replace with 1/-20-1/2" long as suggested. These bolts keep the seat from slipping off the base. Do not overtighten.
Install a plastic rivet, cotter pin or small bolt in this hole at the end of the frame. This is a safety precaution. Should the clamping bolts become loose, the chair frame will not slide off the swivel base frame. Failure to install this component could result in injury to the occupant of the chair.
Wondering how to replace the injectors in your Polaris RZR XP Turbo? Its simpler than you think! Upgrading the injectors in the Polaris RZR XP Turbo is necessary when you get to a certain power level and you do not want to max out the duty cycle of the stock injectors. More fuel is always be...
www.vividracing.com/blog/announcing-new-products-specials...
Step Three - Insert the Chair Arms
There are four sets of threads on the back of the fabric sling chair seat. Set one is located at the top of the sling (top of your head) and set four is located at your knees.
Step Five - Installing the Seat Support Frame
After all stretcher bars and arms are installed, attach the seat basket to the support frame. This frame is then attached to the round swivel base. Install the seat support frame onto the back of the fabric sling frame starting at the fourth thread set. You will again need to use the sling tool to spread the rails apart as described in step two.
Step One - Disassemble Chair
If your chair is a swivel rocker, you will need to remove the chair/seat basket from the round swivel base prior to starting.
Place a washer and nut onto the fourth and third thread set and finger tighten. Now it is time to tighten all the nuts on the entire chair.
Reach into the sling and remove the 2 sling rails from inside the sling fabric material. Your Homecrest chair should now be completely disassembled and ready to install your new replacement sling.
Next, remove all painted nuts and washers using the 7/16" ratchet/wrench from the seat and back side of the chair and set them aside for re-assembly.
Remove the stretcher bars from the seat basket using the rubber mallet. Be sure to keep not of where the stretcher bars were attached.