View allAll Photos Tagged greenstuff
Full body sculpt of Clone trooper armor, painted black. I got the idea after Richard made his stormie. I always like the Phase 1 armor, and still find it better looking than any other trooper variant armor. I sculpted most of it out of greenstuff, with the exception of the knee pads and belt, which was carved from styrene.
DC-15 rifle by brickarms. Love it by the way. Most accurate one on the market right now.
Head used to be from my Eminem figure. Hair was a test which I still think produced insufficient results. Should have sculpted on top of the stud instead of cutting it off.
Black helmet is a casted piece from Brickzalive. Helmet design based on the new Phase 1 TLG clone trooper helmet.
Anyways tell me what yall think. I'm trying to crank out and finish as many customs as I can before I ship.
I fished the base for the Dark Elf Cold One Dread Knight. This is probably my favorite project to date.
—————————————- #myrdred_the_builder #paintingwarhammer #legominifigure #instalego #minifigures #bricknetwork #legoart #afol #paintingminiatures #legomania #customlego #legophotography #legofigure #legogram #fantasyart #toyphoto #toyphotography #brickcentral #toyporn #legomoc #fantasy #fantasyart #fantasyminiatures #handsculpted #warhammer #darkelf #druchii #greenstuff #coldone #miniaturesculpting #sculptingminiatures ———————————————————————————
“Death is lighter than a feather. Duty, heavier than a mountain.”
-al’Lan Mandragoran, Lord of the Seven Towers.
Lan has been one of my favorite fantasy book characters since childhood and I was ecstatic to see him finally brought to life in the Wheel of Time series….more series characters to come.
—————————————- #myrdred_the_builder #legominifigure #instalego #minifigures #bricknetwork #legoart #paintingminiatures #legomania #customlego #legophotography #legofigure #legogram #fantasyart #toyphoto #toyphotography #brickcentral #legomoc #fantasy #fantasyminiatures #greenstuff #handsculpted #wot #thewheeoftime #wheeloftimeseries #danielhenney #lanmandragoran
“When one chooses to walk the Way of the Mandalore, you are both hunter and prey.” — The Armorer
Here’s a fantasy crossover for the armor with a bit of a Viking look. 2 more fantasy mandos in the works at the moment.
3D Printed helmets from @cbb_sales
Hammer, shield, and armor from @brickwarriors
Chest plate, vambraces, and fur cape sculpted with greenstuff.
—————————————- #myrdred_the_builder #legominifigure #instalego #minifigures #bricknetwork #legoart #paintingminiatures #legomania #customlego #legophotography #legofigure #legogram #fantasyart #toyphoto #toyphotography #brickcentral #toyporn #legomoc #fantasy #fantasyminiatures #greenstuff #miniaturesculpting #sculptingminiatures #starwarsart #starwarsfigures #starwarsfan #handsculpted #mandalorianart #themandalorian #
Another custom GoT character.
Here´s Wun Wun the Giant from GoT. The Base was a Gorilla Grodd Big Fig where I sanded off the top. The Hair, Cheek bones, Pelt and top of the boots were sculpted out of Greenstuff/Fimo.
I also used a littlebit of fabric on his Legs. The Bones at his back are glued Lego bricks. The Tree is Brickbuilt and everything else is just painted.
Hope you guys like it.
“Death is lighter than a feather. Duty, heavier than a mountain.”
-al’Lan Mandragoran, Lord of the Seven Towers.
Lan has been one of my favorite fantasy book characters since childhood and I was ecstatic to see him finally brought to life in the Wheel of Time series….more series characters to come.
—————————————- #myrdred_the_builder #legominifigure #instalego #minifigures #bricknetwork #legoart #paintingminiatures #legomania #customlego #legophotography #legofigure #legogram #fantasyart #toyphoto #toyphotography #brickcentral #legomoc #fantasy #fantasyminiatures #greenstuff #handsculpted #wot #thewheeoftime #wheeloftimeseries #danielhenney #lanmandragoran
Balrog/Rancor Hybrid.
Started with a Rancor minifig and sculpted into a Balrog. By far the largest custom fig I’ve made, maybe not the most detailed though.
Inspired by awesome SW/LOTR mashup artwork from @jakebartok
Thanks to my local games shop, @warehouse51games for all the supplies (lots of greenstuff, mordant earth, etc)
—————————————- #myrdred_the_builder #legominifigure #instalego #minifigures #bricknetwork #legoart #paintingminiatures #legomania #customlego #legophotography #legofigure #legogram #fantasyart #toyphoto #toyphotography #brickcentral #legomoc #fantasy #fantasyminiatures #greenstuff #miniaturesculpting #sculptingminiatures #starwarsart #starwarsfigures #starwarsfan #handsculpted #lotr #lotrfanart #balrog #rancor
Original (Left) Improved (Right)
This was one of my earliest customs. Completely remade this fig. I prefer the new self-molded cowl that I made with greenstuff. Also added some gauntlet spikes and my painting's gotten a lot better: the symbol is much cleaner. So... here we are... Batman beyond.
Hopped on dat bandwagon. I decided to make this big man. He started as a Rey Flashlight Figure. The man is ginourmas. He took me like 3 full days to make this man, so I really hope you like him. Somehow, his flashlight feature still works so...
First,I melted of the keychain and popped off the hair.
The face is fully painted and I gave him a evil smile to be different.
The collar and all the gold on the upper-chest is e-tape.
The belt and chest is sculpted from greenstuff.
The arms are painted.
The gauntlet is made from e-tape and greenstuff.
The skirt is e-tape.
The legs and boots are painted.
The knee pads are sculpted and the boot cuffs are e-tape.
This particular image has been sitting on my desktop for a while.
Anyway, here's a new version of the Joker without his purple coat. I know he isn't as heavily customized as most figures I make, but I like the simplicity of this figure alot. The only parts I really made was the hair sculpt (which I based off the Hot Toys Joker), face design (which was heavily inspired by the old miniBigs Joker) and torso. The face and torso are waterslide decals which were applied by Minifigmaker. As per usual, It almost looks like printing, I can hardly make out the edges of the decal when looking at it.
Information about Greenstuff and how to work with it here
Here we have one of my most favorite "figs" I've ever made and if guys read the whole description I'd really appreciate it :)
So my friend Ian us having a contest on Instagram where you have to make a robot and I immediately thought of this. Although it is an automaton he said I could enter it!
First let me say this custom looks a lot better in person, gold and bronze don't photograph well :PThis was a pretty fun custom too make and it had many challenges and I'm happy with how I've executed them.
This custom first started as the head which is a heavily modified lego head, I took the regular head and cut it into a rectangular shape I then used greenstuff to sculpt and shape the base of the head. After that I used procreate for all of the fine details on the face. Then after that I moved onto the torso, it's very heavily modified into a V shape after that I sculpted the little hip area which I drilled a hole into it stuck a paper clip in it and then drilled a hole into a sculpted ball in the torso giving it a twistable torso. After that I made the little ball piece and legs near the bottom.
I thought I'd make a separate little paragraph for the arms since they're so unique. When I was making this custom I wondered how I'd make the arms and then I thought of taking an action figure approach so I gave them ball joints and made it so they could pivot up and down. I did the pivot by taking droid arms and modifying them heavily and then using card and paper clips to make it move.
Everything on the this fig was sculpted using greenstuff and procreate. It was also painted using Apple Barrel, Nicole, and Anita paints.
Onto the diorama, this diorama was rather simple compared to other ones as it was just cardboard and a little bit of EVA foam mats. I designed this after a Dwemer ruin but it isn't 100% accurate to Dwemer architecture but I did add those tubes the Spheres come our of, a chest, and a table with a Dwarven Metal Ingot.
Also make sure to check out the features video! I'd really appreciate it!
If you've made it this far give yourself a pat on the back and you and get a huge thanks from me! Hope you guys like this custom as much as I do! Comments and faves appreciated!
P.S This is also my last entry into Gavin's video game contest.
Wow I finally posted the power armor ;o I've had this custom from before the new year! His body armor including legs is all sculpted with greenstuff while his helmet is sculpey 3, I'm very proud of this guy, and I most likely will be doing X-01 so stay tuned for that! Comments are very appreciated! Also won't be able to reply to comments because of school.
Over the last few months I'v created 4 different version of the Ranger helmet from Fallout New Vegas. And with the last version I recently created I am finally satisfied. I overlooked my past versions and thought it'd make a nice picture if I put them together so people can see what I started from.
I have a full (customized) set of the Riot Gear armour already done, I'll post it later with the last version of the helmet.
Information about Greenstuff and how to work with it here
“Death is lighter than a feather. Duty, heavier than a mountain.”
-al’Lan Mandragoran, Lord of the Seven Towers.
Lan has been one of my favorite fantasy book characters since childhood and I was ecstatic to see him finally brought to life in the Wheel of Time series….more series characters to come.
—————————————- #myrdred_the_builder #legominifigure #instalego #minifigures #bricknetwork #legoart #paintingminiatures #legomania #customlego #legophotography #legofigure #legogram #fantasyart #toyphoto #toyphotography #brickcentral #legomoc #fantasy #fantasyminiatures #greenstuff #handsculpted #wot #thewheeoftime #wheeloftimeseries #danielhenney #lanmandragoran
Another special fig post as promised...
This time again a GoT one like last time. I started her immediately after Viserion. On his post I said the next figure will be Ghost, but then I decided against it since it would´ve been a way too easy figure to make. So I wanted to make Nymeria.
Base for her head was a Lego Chima wolf mask. I then sculpted every detail from nose to ears. I also glued a ball joint into the head.
The body was made entirely of Lego pieces glued together and then also a balljoint to let the head fit.I then took two lego body pieces to also glue them on for the legs/arms.
The front legs are also connected through balljoints but this time small ones.
Her front legs are lego legs without feet and then I glued on a 1 by 2 piece and a cheese slop.
The back legs are made of a lego arm and a skeleton leg.
Both pair of legs got sculpting on them.
The body has got fur sculpted with greenstuff all around it. Finally I also sculpted his tail.
Onto the painting:
I first painted everything white since I was going to make Ghost first. After that I started painting medium grey on the top and a light brown under the figure.
I then painted light flesh colour on the sides of the legs.
After all that I drybrushed the fur with white and then washed everyting with black. After that part I again drybrushed this time only on the parts that shall stand out more.
The head was the hardest part to paint so I´m not going to deep into describing. I then easily painted the claws first tan, then washed brown and then a higlight with light flesh.
That´s pretty much it for Nymeria. Not sure who I´m goint to post next here so stay tuned.
Thanks for sticking around to read this ;)
Hope you guys like it.
I recently got green stuff so I thought I would update this fig.The cowl is made from and additional armor pieces are made from greenstuff. the Batarang is made from cut up pieces from a batarang and lever.I updated the rest of my arkham knight figures just say if you want to see the rest.
Cloak: sculpted with greenstuff
Armor: kitbashed Koruit Orc Armor
Axe: kitbashed Koruit dwarf swords
Grieves: Brickwarriors vambraces
I've had this standing here way too long. But here's my try at a German WWI shocktrooper armour.
It's made using a knights armour and greenstuff. I feels that it came out really good, do you agree?
I was messing around with some parts and came up with this...
Helmet is heavily Modified Brickwarriors Galaxy Enforcer Helmet.
Vambraces are by Brickforge and modified with Greenstuff by Games Workshop.
Sculpting on Legs and Torso also done with Greenstuff by Games Workshop.
Sheath for the sword is by MMCB
Kneepad are Tiny Tactical
Here we have a character I'v been wanting to do for a while, and definatly in my top 3 favourite characters from Fallout too; Joshua Graham, Also known as The Burned Man and Malpais Legate. I'm extremely happy with how the head turned out, it has just that right amount of bandages. I'm also very happy on how "messy" the shirt came out, it has just the right amount of dirt on it to make it look like He's been through some action, which in game, he has.
The vest and arm sleeves are sculpted and painted by yours truly. The "A Light Shining In Darkness" .45 auto pistol is a minifig.cat pistol.
Information about Greenstuff and how to work with it here
Everyone's favorite Zora (besides Sidon), here we have Mipha!
Along with Daruk, Mipha definitely took quite a bit to finish. Simply due to her head, which was difficult to get right and after many attempts I got something I was happy with. The body and arms weren't really that hard to do but figuring out idea for than proved bit of a challenge. Everything else was really simple.
The torso was given a curve and the toes were cut off and I added sculpted toes. All sculpting was done using Procreate and Greenstuff and was painted using all Apple Barrel paints. Her spear was made using Lego pieces and Greenstuff.
Sorry if the paint quality isn't the best, especially the face something weird happened and my white paint acted weird.
Anyway hope you guys like the fig! Comments and faves appreciated!
Up next is Link!
Also my contest results will be out soon, hopefully tomorrow if I can remember.
"You kiss me tomorrow, I´ll bite you Face off!! *plays gangsta rap*
So here we got a Microfigure totally out of nowhere.
This dude is actually the best part of the movie in my opinion, so I decided to make him really quick. The Base was a Lego microfigure. Then I sculpted on the Head with Fimo and the ears, Tail and the snout were out of Greenstuff. I know the eyes are somehow a littlebit too tiny but I don´t care cause the paintjob looks really accurate. I also made a Nick wilde that I´m going to post tomorrow or somewhen.
Hope you guys like it.
Ok so I got some greenstuff this year for christmas. :D Well I tried using it and it was REALLY sticky, I might've used a little too much of a color. So I would like you guys to help me with some tips. All who are tagged are considered good with 2 part epoxy in my opnion. Thank you all!
"Yahahaha, you found me!"
Wow a custom post :o What a surprise! Well sorry for not posting any customs in the past months I've been very busy working on my Breath of the Wild Champions project. Anyways lets get onto the fig.
So this fig started as just extra Greenstuff that I had no idea what to do with. Then I decided to actually finish it today after having the sculpt sit around for like a month or two. It was a pretty simple fig to make so I really won't go in to detail. The body, berries, and leaf were all sculpted using Greenstuff, and then I painted it using Apple Barrel and Anita paints.
Now on to my thoughts on Koroks.......I'm honestly not a huge fan of the 900 seeds but hey...it gives a better reason to 100% the game. But I do love the Korok's as characters. My favorite being Hestu(who I might make), he's just so happy and excited all the time. So far I've only collected around 120 seeds in 40 hours of gametime but I haven't really tried finding them yet, that's gonna be my objective after finding all of the shrines.
Welp hope you guys like this custom as much as I do! Comments and faves appreciated, stay tuned for the champions they should be finished towards the end of May or beginning of June!
Made for an online contest this model is meant to depict a prominent youtube vid-logger that has a fetish for Pre-Heresy Imperial Fists much like i myself have :)
His head is from the Dark Vengeance sergeant with some hair added in greenstuff.
Hero of the Republic - In this Alternate Universe as Anakin stands over Palapatine and Windu the struggle between the Light and the Dark wages war inside of him. Palapatine lay weak, Windu ready to strike the final blow upon him. Anakin wanting Palapatine to stand trial reaches for his lightsaber blocking Windu's fatal strike upon the would be Emperor and steps between the two. Palapatine strikes with his force lightning meaning to hit Windu but engulfs Anakin instead turning his hair white in color. Anakin though overwhelmed by the power of the lighting pushes Windu to safety and deals the final blow to Palapatine himself. A blow that still haunts his dreams to this day. The truth about Palapatine is revealed, the evil plot destroyed and Order 66 never implemented.
Torso and Legs by: Clone Army Customs, modified by: KJ
Vambrace by: Brickforge, modified with GamesWorkshop Greenstuff by KJ
Other Custom items: Painted Hair, Warhammer Shoulder Armor, Modified LEGO Lightsaber hilt and cape. Painting by KJ
Hero of the Republic - In this Alternate Universe as Anakin stands over Palapatine and Windu the struggle between the Light and the Dark wages war inside of him. Palapatine lay weak, Windu ready to strike the final blow upon him. Anakin wanting Palapatine to stand trial reaches for his lightsaber blocking Windu's fatal strike upon the would be Emperor and steps between the two. Palapatine strikes with his force lightning meaning to hit Windu but engulfs Anakin instead turning his hair white in color. Anakin though overwhelmed by the power of the lighting pushes Windu to safety and deals the final blow to Palapatine himself. A blow that still haunts his dreams to this day. The truth about Palapatine is revealed, the evil plot destroyed and Order 66 never implemented.
Torso and Legs by: Clone Army Customs, modified by: KJ
Vambrace by: Brickforge, modified with GamesWorkshop Greenstuff by KJ
Other Custom items: Painted Hair, Warhammer Shoulder Armor, Modified LEGO Lightsaber hilt and cape. Painting by KJ
Comments and Criticism always appreciated. Enjoy!!!
Balrog/Rancor Hybrid.
Started with a Rancor minifig and sculpted into a Balrog. By far the largest custom fig I’ve made, maybe not the most detailed though.
Inspired by awesome SW/LOTR mashup artwork from @jakebartok
Thanks to my local games shop, @warehouse51games for all the supplies (lots of greenstuff, mordant earth, etc)
—————————————- #myrdred_the_builder #legominifigure #instalego #minifigures #bricknetwork #legoart #paintingminiatures #legomania #customlego #legophotography #legofigure #legogram #fantasyart #toyphoto #toyphotography #brickcentral #legomoc #fantasy #fantasyminiatures #greenstuff #miniaturesculpting #sculptingminiatures #starwarsart #starwarsfigures #starwarsfan #handsculpted #lotr #lotrfanart #balrog #rancor
Here it is the long awaited X-01...
I think I started this fig like 3 or more months ago, and I had put it aside till Mclovin announced his Instagram contest. I tried my hardest to finish the fig but to my dismay I couldn't. Anyways let's get to the fig.
This power armors paint job is based off a mod I found, where it added an Enclave color scheme. It looked real cool so I tried it out and it turned out amazing!
This definitely has to be one of my favorite customs to date. Everything just turned out awesome. I personally think the torso looks really clean and we'll done. The helmet was very difficult to make as there weren't a lot of reference pictures, but I was able to make it look pretty good. Everything seen was sculpted with Procreate and Greenstuff and painted with Apple Barrel, Anita, and Citadel paints.
The laser rifle is technically a mod since it has brickarms parts but it's mainly hand made its composed of plastic card, procreate, paper clips and a brickarms ppsh. This was a really fun mod to make and I hope you guys enjoy it!
Also I whipped up a quick scenery piece showing a vault door, it's not the best but it'll do :P
Hope you guys enjoy this custom as much as I do. This is my second figure for Project Purity, next is Ulssyes from The Long Road. Comments and faves appreciated!
P.S I took inspiration from Mason Gedert for the helmet, I probably wouldn't have made it without him so thanks Mason!
This is my final entry into Daring Customs' Animation Contest.
I have been working on my Batman and Robin Collection.
Custom Paint by: KJ
Vambraces by: Brickforge, modified with Greenstuff by KJ.
Custom Cape by: Unknown
I hope you enjoy!
C&C Appreciated!
Hey Everyone Sorry for the lack of uploads lately I have just been very busy lately with stuff at home !
Anyway First off I would just like to say that I was inspire to make this figure by MGF Customs/Reviews as I love halo and he made me think of the perfect idea to make this figure.
I have been working on this guy almost a month now and I have put a lot of work into it, His torso is completely sculpted by me using Greenstuff, I tried to create a really accurate sculpt to chiefs armor and I think I did quiet a good job, I also sculpted his shoulder armor along with knee pads.I than sculpted little squares and glued them on to his hand to create his glove armour. As for the helmet I took a Brickforge Space marine helmet and applied a thin layer of greenstuff around it with a bit more added to the fron t to give it a more realistic 3D shape, his shoes are also sculpted.
Once I applied the greenstuff I than added a layer of light green paint, and added black details on each part of his armor. For his boots I was trying to come up with an idea of how to incorporate sculpting in with it, and so I ended up with this. I know its not very accurate but I quiet like it.
Chief come equipped with a brickarms battle rifle with was painted grey with other small details.
I am currently saving up for an Xbox One so I can get The Master Chief collection for Christmas ! Please tell me what you guys think and if you favourite it please make sure and comment Thanks guys !
Dwarf Longbeards of the “Grumbling Guard”
“Longbeards have fought in more wars, beaten more enemies and endured greater hardships than any young Dwarf can possibly imagine. They constantly grumble about how today's Goblins are far smaller and weedier than they used to be and how nothing is as well made as it was in their day. No young Dwarf, as hot-headed and tempestuous as he might be, would dare gainsay a Longbeard; after all, they have much more experience - and the beard to prove it!”
I built these guys over a year ago with some modified @brickwarriors, lego, and @greenstuff. Finally got around to painting them.
————————————————————
#myrdred_the_builder #legominifigure #instalego #minifigures #bricknetwork #legohub #legoart #afol #paintingminiatures #legophotography #legogram #fantasyart #highfantasy #greenstuff #dwarves #paintingwarhammer #toyphoto #toyphotography #brickcentral #legomoc #moclego #fantasy #custommade #miniaturepainting #dawi #warhammer #longbeards #warhammertotalwar #totalwarwarhammer #dwarfwarrior
I never thought I'd be making any war based customs toll I played Battlefield 1, although I didn't reach level 15 I still had a lot of fun and was inspired. After fiddling around with the small amount of WW2 brickarms I had and came up with this!
So let's get into the fig! He has a sculpted jacket, made using greenstuff and proceate and painted with multiple brands of paint. The autumn camo isn't supposed to be accurate, it's just a mash of different camos. The MP40 just has a silver dry brush, and I decided to use the well as the background again as I really like it.
I took some more photos today, this and some Halo ones so ill.be posting those some time in the upcoming days.
Hope you guys like this customs, I had a fun time making it! Comments and faves appreciated!
This is another shot with some PS Effect .
Hey guys this is my new Original Custom , this is a fan version of Two Face , this is my first try with the Green Stuff Clay so i try this custom about one of my favourite villain of Batman World .
Hope you guys like it ;) !
UNSC Marines from Halo. Original sculpts by @elon_wagner with some light mods and painting by me.
—————————————- #myrdred_the_builder #legominifigure #instalego #minifigures #bricknetwork #legoart #paintingminiatures #legomania #customlego #legophotography #legofigure #legogram #fantasyart #toyphoto #toyphotography #brickcentral #toyporn #legomoc #fantasy #fantasyminiatures #greenstuff #miniaturesculpting #sculptingminiatures #halo #halowars #unsc #unscmarines
-After watching season three of Daredevil my favorite character was Benjamin Pointdexter and I had to make him along with a few others from the season
-I’m very lazy and didn’t feel like searching for an image of him wearing this outfit so I just copied and pasted Yale Jeong design onto my figure and I think I did a decent job at least
-I hope you enjoy more coming soon
The King beyond the wall!
He was my first custom of 2017 and thats why there´s still snow out there.
Hair was a modified old luke skywalker one which I shade painted then. Face was entirely handpainted by me.
All the pelt were sculpted out of greenstuff by me. The E-tape wastecape was my last one from barman.
Hope you guys like it.
Cloak: sculpted with greenstuff
Armor: kitbashed Koruit Orc Armor
Axe: kitbashed Koruit dwarf swords
Grieves: Brickwarriors vambraces
Yo Guys !
This is my New Custom of Aloy from Horizon Zero Dawn .
This game it's so awesome , it's one of the best game i've played this year so , to onore this game i've decided to create this custom .
I'm not shure to call this "CUSTOM" because i've use so many materials and other things , so i think this is a "Cosplay Minifig" XD , i'm joking ok ahahaha .
I've work on she for 2 Weeks but the most difficult part was the bow but at the end i'm so proud about the result .
Hope guys you like it :) ! #Aloy #Horizon #zero #Dawn
Someone ones told me I could put greenstuff under a lamp to make it cure faster. But not to long, not to close to the lamp.
I guess I didn't listen.
My masterpiece is gone.
FYI this was the first time it didn't go my way, it's worked just fine before. Luckily nothin caught fire...
I had some very nice stuff on the way indeed. It might take a little longer to finish it now.
my take on the fallout 4 power armor. the power core is made out of green stuff and is removable.
the armor was made by me using citadel greenstuff.
i used stormtrooper helmet as a base for the helmet.
Here we have him, finally. The Joker from the Dark Knight, at least my rendition of him. I always liked his look from the bank robbery scene, which is why I made that version. I also believe I made his "make-up" the right amount of messy. He was also inspired by a few other versions I'v seen throughout Flickr, people from which I got this inspiration will be added.
The vest, hair and gloves are custom sculpt. Information about Greenstuff and how to work with it here
endlich wieder Grünfutter :)
finally greenstuff :)
Kulturfolger und Vegetarier
Der Grünfink oder Grünling (Carduelis chloris)
dieser Fink setzt ganz auf pflanzliche Kost. Schon die Jungvögel werden mit einem Müsli aus vorgeweichten Samen aufgepäppelt. Auch im Sommer stehen fast ausschließlich Pflanzenteile, Beeren und Knospen auf dem Speiseplan. Im Winter ernähren sich Grünfinken von ölhaltigen Samen und Früchten.
Synanthropic and vegetarians
The Greenfinch (Carduelis chloris)
This Fink relies entirely on vegetable food. Already the young birds are fed up with a cereal made of soaked seeds. Also in the summer, almost exclusively parts of plants, berries and buds are on the menu. In the winter, Greenfinches feed of oleaginous seeds and fruits.