View allAll Photos Tagged fuelinjector
My Lego AK-47 Fuel Injector is now combined with a background from Counter-Strike in my first attempt at using Photoshop!
2002 Honda Civic EX ECU pinout for MPGuino wiring.
VSS wire is green/white stripe.
Fuel injectors 1-4 are black/red/blue/yellow.
The liquid breakup of a high-density stream from a fuel injector as imaged with ultrafast synchrotron x-ray full-field phase contrast imagingat the U.S. Department of Energy’s Advanced Photon Source (APS) at Argonne National Laboratory.
Christopher Powell, an engine research scientist at Argonne, aligns an X-ray beam tube at the Transportation Research Beamline at Argonne's Advanced Photon Source.
Christopher Powell, an engine research scientist at Argonne, fits a specially designed X-ray pressure window to a high-pressure chamber used in diesel spray research. These windows allow Argonne researchers to use X-rays to probe diesel sprays under the high-density conditions found in diesel engines.
This supplied a proper mix of liquid oxygen and liquid hydrogen fuel to the M-1 rocket engine. The M-1 was the largest rocket engine built by the U.S., but it never flew. At the Evergreen Aviation & Space Museum in McMinnville, Oregon.
Alan Kastengren, a mechanical engineer at Argonne, examines a diesel injection nozzle used in Argonne's X-ray spray research.
TURBO CARB
CARBURETOR & INJECTOR CLEANER
FAST & POWERFUL with new formula & SPRAY gun
• For automatic choke, linkage, throat, PVC valve, intake valve & combustion chamber; also for engine surface, spare parts and can be used during engine overhaul to remove sludge, grease, gum, varnish & carbon.
• Improves engine performance & acceleration, reduces fuel consumption and exhaust gas emissions. Recommended for use once every 5,000 to 6,000 km.
• CFC-Free - Ozone Friendly
Note: Be careful! Strong liquid. Do not spill on painted surface, rubber or certain plastics. Immediately wipe to dry if spilled & rinse thoroughly with water.
How to use:
1. Carburetor & linkage: with engine turned off, remove air filter & spray entire carburetor's outer surface, including rod & choke linkage. Leave for about 1 minute, then repeat spraying to rinse off all dirt, grease & deposit.
2. Automatic choke: with engine turned off, spray both ends of choke valve while opening & closing by hand. Spray vacuum cylinder to remove dirt & gums.
3. PCV valve: with engine turned off, remove PCV valve at the crankcase end, insert tip of can into the open end of the valve and spray while moving the valve. Start engine & repeat spraying to clean off all dirt.
4. Carburetor throat & throttle plate: with engine running, spray all inner parts of carburetor throat to remove adhered deposit/dirt within throttle plate area & other parts.
It is recommended to work out the cleaning process in an open and well ventilated area. Avoid contact with painted surfaces, rubber, plastics or car body. If contact occurs, immediately wipe with clean & dry cloth. During application, it is normal if the engine turns unstable and there’s white smoke coming out from the exhaust.
Packaging: 500 ml Aerosol Can
CONTACT US FOR DETAILS AND PRICING
Email: idsales@jcprimo.com
This one is okay, but the other was very badly caked in carbon. The injectors were cleaned with a piece of very soft wood, pressure tested, and all the gaskets replaced as well. Fortunately, neither injector bore any signs of ring wear, so that’s a major concern crossed off the list.
After-burner fuel injectors on a high performance jet engine, seen at the Canadian Aviation and Space Museum in Ottawa, Canada.
We supply fuel injection pump, fuel injector, delivery valves, nozzle, ,injection plunger, which made under strictly quality control of F-Diesel The complete Fuel Injection pump and related products supplied by us are widely applied in diesel engines of various powers. Except for China domestic OE market, We are now OE supply complete set of Fuel injection pump to Iran and India engine manufacturers. www.f-diesel.com/
The cylinder head is back in place, it would appear i have a minor sludge problem, hard to explain this as i keep up on the oil changes and have been using the same brand for years.
The fuel injectors not only meter the amount of fuel going to the engine, they also add pressure so there’s no need for a separate fuel pump. This system is one of the most important things that set Evinrude outboard engines apart from all the others.
For more tests, reviews, captain's report go to Evinrude E-TEC 250 H.O model page
The two E-TEC injectors work very much like the speaker coils in your home stereo. A wire coil goes around a magnet stack in the injector housing. Evinrude is able to define the amount of current going through the coil and cause it to oscillate and move the coil to pump fuel. An interesting feature of these injectors is that at idle they actually inject about 5 cubic millimeters per shot, which is about the size of a champagne bubble. that is part of how these engines are so fuel efficient.
For more tests, reviews, captain's report go to Evinrude E-TEC 50-hp model page
It may have happened with you when you drive your vehicle that sometimes you feel a noticeable decrease in the mileage of your car or any other vehicle. There are many factors present that can affect the mileage of your vehicle, such as the type of fuel you are using, pressure in the tires, lack of regular engine maintenance, etc. But in case if you notice a significant change in the mileage of 3 to 4 gallons/liters of fuel, then this might be a clogging problem in your engine or the fuel injectors. The clogging problem mostly occurs because of the carbon waste that fuel produces after combustion.
If you feel that your vehicle’s fuel injector clogged-up, then it is a recommendation for you to take it to the service center, but it will cost you too high. Instead, you can do this task on your own with the help of a fuel injector cleaner. If you have used the fuel injector cleaner before but are looking for the best one, this post is all about you.
In the market, there are too many types of fuel injector cleaners present, and these varieties can easily distract any average person. Some bad fuel injector cleaner quality can cause severe corrosion problems in your whole fuel injecting system as well. It was the main reason why we have decided to help you out in this situation by listing ten best fuel injector cleaners of 2020 at this in-detailed post. Below you will get those injector cleaners that are offering more value to the customers as compared to the price point.
The vapor separator pressurizes the fuel system and sends 30 PSI to the fuel injectors. In this manner Evinrude is able to eliminate the need for a fuel pump. The vapor separators on all E-TEC's are water cooled.
For more tests, reviews, captain's report go to Evinrude E-TEC 50-hp model page