View allAll Photos Tagged extensions

en.wikipedia.org/wiki/Eurasian_wryneck

  

The Eurasian wryneck (Jynx torquilla) is a species of wryneck in the woodpecker family. This species mainly breeds in temperate regions of Europe and Asia. Most populations are migratory, wintering in tropical Africa and in southern Asia from Iran to the Indian Subcontinent, but some are resident in northwestern Africa. It is a bird of open countryside, woodland and orchards.

 

Eurasian wrynecks measure about 16.5 cm (6.5 in) in length and have bills shorter and less dagger-like than those of other woodpeckers. Their upperparts are barred and mottled in shades of pale brown with rufous and blackish bars and wider black streaks. Their underparts are cream speckled and spotted with brown. Their chief prey is ants and other insects, which they find in decaying wood or on the ground. The eggs are white as is the case with many birds that nest in holes and a clutch of seven to ten eggs is laid during May and June.

 

These birds get their English name from their ability to turn their heads through almost 180 degrees. When disturbed at the nest, they use this snake-like head twisting and hissing as a threat display. This odd behaviour led to their use in witchcraft, hence to put a "jinx" on someone.

  

Taxonomy and etymology

  

The Eurasian wryneck was first described by Carl Linnaeus in the tenth edition of his Systema Naturae in 1758. The type species came from Sweden.[2]

 

The genus name Jynx is from the Ancient Greek name for this bird, iunx. The specific torquilla is Medieval Latin derived from torquere, to twist, referring to the strange snake-head movements.[3] The bird was used as a charm to bring back an errant lover, the bird being tied to a piece of string and whirled around.[3] The English "wryneck" refers to the same twisting movement and was first recorded in 1585.[4]

 

The family Picidae has four subfamilies, the Picinae (woodpeckers), the Picumninae (piculets), the Jynginae (wrynecks) and the monotypic Nesoctitinae (Antillean piculet).[5] Based on morphology and behaviour, the Picumninae was considered to be the sister clade of the Picinae. This has now been confirmed by phylogenetic analysis and the Jynginae are placed basal to the Picinae, Nesoctitinae and Picumninae.[5]

 

Jynginae includes one genus (Jynx) and two species, the Eurasian wryneck and the red-throated wryneck (Jynx ruficollis), resident in sub-Saharan Africa.[6] There are six subspecies of Jynx torquilla: [7]

 

Jynx torquilla chinensis Hesse, 1911

Jynx torquilla himalayana Vaurie, 1959

Jynx torquilla mauretanica Rothschild, 1909

Jynx torquilla sarudnyi Loudon, 1912

Jynx torquilla torquilla Linnaeus, 1758

Jynx torquilla tschusii O. Kleinschmidt,1907

  

Description

  

The Eurasian wryneck grows to about 17 cm (6.7 in) in length.[2] The subspecies Jynx torquilla tschusii weighs 26 to 50 g (0.92 to 1.76 oz).[8] It is a slim, elongated-looking bird with a body shape more like a thrush than a woodpecker. The upperparts are barred and mottled in shades of pale brown with rufous and blackish bars and wider black streaks. The rump and upper tail coverts are grey with speckles and irregular bands of brown. The rounded tail is grey, speckled with brown, with faint bands of greyish-brown and a few more clearly defined bands of brownish-black. The cheeks and throat are buff barred with brown. The underparts are creamy white with brown markings shaped like arrow-heads which are reduced to spots on the lower breast and belly. The flanks are buff with similar markings and the under-tail coverts are buff with narrow brown bars. The primaries and secondaries are brown with rufous-buff markings. The beak is brown, long and slender with a broad base and sharp tip. The irises are hazel and the slender legs and feet are pale brown. The first and second toes are shorter than the others. The first and fourth toes point backwards and the second and third point forwards, a good arrangement for clinging to vertical surfaces.[2]

 

The call of the Eurasian wryneck is a series of repeated harsh, shrill notes quee-quee-quee-quee lasting for several seconds and is reminiscent of the voice of the lesser spotted woodpecker. Its alarm call is a short series of staccato "tuck"s and when disturbed on the nest it hisses.[

  

Distribution and habitat

  

The Eurasian wryneck has a palearctic distribution. The breeding range of the nominate subspecies includes all of Europe from Britain to the Urals. In the north it reaches the Arctic Circle and the range includes Spain in the southwest. In the south and east it intergrades with J. t. tschusii (smaller and more reddish brown) which is found in Corsica, Italy, Dalmatia and parts of the Balkans. J. t. mauretanica (also smaller than the nominate form, light, with whitish throat and breast) is resident in Algeria and Morocco and possibly also the Balearic Islands, Sardinia and parts of Sicily. J. t. sarudnyi (considerably paler than the nominate with fainter markings) occurs in the Urals and then in a wide strip of Asia through southern Siberia, Central Asia, including the north-western Himalayas to the Pacific coast. J. t. chinensis breeds in eastern Siberia and northeastern and central China while J. t. himalayana breeds in Pakistan and the northwestern Himalayas.[9] Eurasian wrynecks also inhabit the island of Sakhalin,[10] Japan and the coastal areas of southern China.[11][12]

 

The Eurasian wryneck is the only European woodpecker to undertake long distance migrations. The wintering area of European species is located south of the Sahara, in a wide strip across Africa extending from Senegal, Gambia and Sierra Leone in the west to Ethiopia in the east. Its southern limit extends to the Democratic Republic of Congo and Cameroon. The populations from West Asia use the same wintering areas. The Central and East Asian breeding birds winter in the Indian subcontinent or southern East Asia including southern Japan.[2]

 

During the summer the bird is found in open countryside, parkland, gardens, orchards, heaths and hedgerows, especially where there are some old trees. It may also inhabit deciduous woodland and in Scandinavia it also occurs in coniferous forests.

  

Behaviour

  

The Eurasian wryneck sometimes forms small groups during migration and in its winter quarters but in the summer is usually found in pairs. It characteristically holds its head high with its beak pointing slightly upwards. A mutual display that occurs at any time of year involves two birds perched facing each other with their heads far back and beaks wide open, bobbing their heads up and down. Sometimes the head is allowed to slump sideways and hang limply. On other occasions, when excited, the head is shaken and twisted about violently. When disturbed on the nest or held in the hand, the neck contorts and twists in all directions. The bird sometimes feigns death and hangs limply with eyes closed.[2]

  

On returning to the breeding area after migration, the birds set up territories. On farmland in Switzerland it has been found that old pear orchards with large numbers of ant nests are preferentially selected over other habitats. Areas used for vegetable cultivation provided useful habitat when they include areas of bare ground on which the birds can forage.[13] Territories are not chosen at random as arriving birds favoured certain areas over others with the same territories being colonised first year after year. The presence of other Eurasian wrynecks in the vicinity is also a positive influence. Orchards in general, and older ones in particular, provide favoured territories, probably because the dense foliage is more likely to support high numbers of aphids and the ground beneath has scant vegetation cover, both of which factors increase the availability of ants, the birds' main prey. Despite some territories being consistently chosen over others, reproductive success in these territories was no higher than in others.[14] Limiting factors for such crevice-nesting species as Eurasian wrynecks are both the availability of nesting sites and the number of ants and their ease of discovery. Modern farming practices such as the removal of hedges, forest patches and isolated trees and the increasing use of fertilisers and pesticides are disadvantageous to such birds.[15]

 

The diet of the Eurasian wryneck consists chiefly of ants but beetles and their larvae, moths, spiders and woodlice are also eaten. Although much time is spent in the upper branches of trees, the bird sometimes perches in low bushes and mostly forages on the ground, moving around with short hops with its tail held in a raised position. It can cling to tree trunks, often moving obliquely, and sometimes pressing its tail against the surface as a prop. It does not make holes in bark with its beak but picks up prey with a rapid extension and retraction of its tongue and it sometimes catches insects while on the wing. Its flight is rather slow and undulating.

  

Breeding

  

The nesting site is variable and may be in a pre-existing hole in a tree trunk, a crevice in a wall, a hole in a bank, a sand martin's burrow or a nesting box.[2] In its search for a safe, protected site out of reach of predators, it sometimes evicts a previous occupant, its eggs and nestlings.[16] It uses no nesting material and a clutch of normally seven to ten eggs is laid (occasionally five, six, eleven or twelve). The eggs average 20.8 by 15.4 millimetres (0.82 in × 0.61 in) and weigh about 0.2 g (0.007 oz). They are a dull white colour and partially opaque. Both sexes are involved in incubation which takes twelve days, but the female plays the greater part. Both parents feed the chicks for about twenty days before they fledge. There is usually a single brood.

  

Status

  

The IUCN lists the Eurasian wryneck as being of "Least Concern" in its Red List of Threatened Species. This is because it has a world population estimated at up to fifteen million individual birds and a very wide geographical range. The population may be decreasing to a certain extent but not at such a rate as to make the bird reach the threshold for a more threatened category.[1] In continental Europe, the largest populations are in Spain, Italy, Germany, Poland, Romania, Hungary, Belarus and Ukraine, and only in Romania is the population trend believed to be upward. In Russia, where there are believed to be 300,000 to 800,000 individuals, the population trend is unknown.[17] In the United Kingdom the numbers of bird are on the decrease and it is protected under Schedule 1 of the Wildlife and Countryside Act 1981 and is listed on Appendix II of the Bern Convention. It is protected as a migratory species under the Birds Directive in the European Union.[18] In Switzerland, the population has also been decreasing, but the species has reacted positively to conservation measures such as the addition of nestboxes in suitable habitats.

This picture was taken in Dayton, Ohio at Wegerzyn Gardens with my 180mm lens * 20mm Extension tube.Better view in Light box.

 

As always thank you for your lovely comments.

I haven't quite got the shots of this new addition to the London skyline that I want yet. Partly because one of the cranes is still up and they are still doing all the landscaping. They had better get a move on. It's due to open on the 17th June.

 

www.tate.org.uk/visit/tate-modern/new-tate-modern/building

This is quite a pale form of D. saundersi. I often find them with much more red/burgundy pigmentation and are usually darker than the D.ornata I find in my back garden.

 

I find the colour change along the antenna the best way to separate these two species, although you can also identify by the shape of the abdominal patch (not visible in this image)

 

In the comments is a shot of the adult of the same species, found in a similar location.

 

2 images @ 5X MP-e (+68mm extension tubes)

The Extension Ridge Trail, part of The Great Trail, begins or ends at Virostko Road in Extension south of Nanaimo, British Columbia, Canada.

K-1 + SMC K 28/3.5 wide open + n° 1 Pentax K-mount extension tube for the Single Challenges thread.

An Air Force Lockheed Martin F-22 "Raptor" assigned to the 3rd Wing flies over Joint Base Elmendorf-Richardson, Alaska, Feb. 27, 2018. The Lockheed Martin F-22 "Raptor" is the U.S. Air Force’s premium fifth-generation fighter asset.

  

From Wikipedia, the free encyclopedia

 

The Lockheed Martin F-22 "Raptor" is a fifth-generation, single-seat, twin-engine, all-weather stealth tactical fighter aircraft developed for the United States Air Force (USAF). The result of the USAF's Advanced Tactical Fighter (ATF) program, the aircraft was designed primarily as an air superiority fighter, but also has ground attack, electronic warfare, and signal intelligence capabilities. The prime contractor, Lockheed Martin, built most of the F-22's airframe and weapons systems and conducted final assembly, while Boeing provided the wings, aft fuselage, avionics integration, and training systems.

 

The aircraft was variously designated F-22 and F/A-22 before it formally entered service in December 2005 as the F-22A. Despite its protracted development and various operational issues, USAF officials consider the F-22 a critical component of the service's tactical air power. Its combination of stealth, aerodynamic performance, and situational awareness enable unprecedented air combat capabilities.

 

Service officials had originally planned to buy a total of 750 ATFs. In 2009, the program was cut to 187 operational production aircraft due to high costs, a lack of clear air-to-air missions due to delays in Russian and Chinese fighter programs, a ban on exports, and development of the more versatile F-35. The last F-22 was delivered in 2012.

  

Development

 

Origins

 

In 1981, the U.S. Air Force identified a requirement for an Advanced Tactical Fighter (ATF) to replace the F-15 "Eagle" and F-16 "Fighting Falcon". Code named "Senior Sky", this air-superiority fighter program was influenced by emerging worldwide threats, including new developments in Soviet air defense systems and the proliferation of the Su-27 "Flanker"- and MiG-29 "Fulcrum"-class of fighter aircraft. It would take advantage of the new technologies in fighter design on the horizon, including composite materials, lightweight alloys, advanced flight control systems, more powerful propulsion systems, and most importantly, stealth technology. In 1983, the ATF concept development team became the System Program Office (SPO) and managed the program at Wright-Patterson Air Force Base. The demonstration and validation (Dem/Val) request for proposals (RFP) was issued in September 1985, with requirements placing strong emphasis on stealth and supercruise. Of the seven bidding companies, Lockheed and Northrop were selected on 31 October 1986. Lockheed teamed with Boeing and General Dynamics while Northrop teamed with McDonnell Douglas, and the two contractor teams undertook a 50-month Dem/Val phase, culminating in the flight test of two technology demonstrator prototypes, the YF-22 and the YF-23, respectively.

 

Dem/Val was focused on risk reduction and technology development plans over specific aircraft designs. Contractors made extensive use of analytical and empirical methods, including computational fluid dynamics, wind-tunnel testing, and radar cross-section calculations and pole testing; the Lockheed team would conduct nearly 18,000 hours of wind-tunnel testing. Avionics development was marked by extensive testing and prototyping and supported by ground and flying laboratories. During Dem/Val, the SPO used the results of performance and cost trade studies conducted by contractor teams to adjust ATF requirements and delete ones that were significant weight and cost drivers while having marginal value. The short takeoff and landing (STOL) requirement was relaxed in order to delete thrust-reversers, saving substantial weight. As avionics was a major cost driver, side-looking radars were deleted, and the dedicated infra-red search and track (IRST) system was downgraded from multi-color to single color and then deleted as well. However, space and cooling provisions were retained to allow for future addition of these components. The ejection seat requirement was downgraded from a fresh design to the existing McDonnell Douglas ACES II. Despite efforts by the contractor teams to rein in weight, the takeoff gross weight estimate was increased from 50,000 lb (22,700 kg) to 60,000 lb (27,200 kg), resulting in engine thrust requirement increasing from 30,000 lbf (133 kN) to 35,000 lbf (156 kN) class.

 

Each team produced two prototype air vehicles for Dem/Val, one for each of the two engine options. The YF-22 had its maiden flight on 29 September 1990 and in flight tests achieved up to Mach 1.58 in supercruise. After the Dem/Val flight test of the prototypes, on 23 April 1991, Secretary of the USAF Donald Rice announced the Lockheed team as the winner of the ATF competition. The YF-23 design was considered stealthier and faster, while the YF-22, with its thrust vectoring nozzles, was more maneuverable as well as less expensive and risky. The aviation press speculated that the Lockheed team's design was also more adaptable to the U.S. Navy's Navalized Advanced Tactical Fighter (NATF), but by 1992, the Navy had abandoned NATF.

  

Production and procurement

 

As the program moved to full-scale development, or the Engineering & Manufacturing Development (EMD) stage, the production version had notable differences from the YF-22, despite having a broadly similar shape. The swept-back angle of the leading edge was decreased from 48° to 42°, while the vertical stabilizers were shifted rearward and decreased in area by 20%. To improve pilot visibility, the canopy was moved forward 7 inches (18 cm), and the engine intakes moved rearward 14 inches (36 cm). The shapes of the wing and stabilator trailing edges were refined to improve aerodynamics, strength, and stealth characteristics. Increasing weight during development caused slight reductions in range and maneuver performance.

 

Prime contractor Lockheed Martin Aeronautics manufactured the majority of the airframe and performed final assembly at Dobbins Air Reserve Base in Marietta, Georgia; program partner Boeing Defense, Space & Security provided additional airframe components as well as avionics integration and training systems. The first F-22, an EMD aircraft with tail number 4001, was unveiled at Marietta, Georgia, on 9 April 1997, and first flew on 7 September 1997. Production, with the first lot awarded in September 2000, supported over 1,000 subcontractors and suppliers from 46 states and up to 95,000 jobs, and spanned 15 years at a peak rate of roughly two airplanes per month. In 2006, the F-22 development team won the Collier Trophy, American aviation's most prestigious award. Due to the aircraft's advanced nature, contractors have been targeted by cyberattacks and technology theft.

 

The USAF originally envisioned ordering 750 ATFs at a total program cost of $44.3 billion and procurement cost of $26.2 billion in fiscal year (FY) 1985 dollars, with production beginning in 1994. The 1990 Major Aircraft Review led by Secretary of Defense Dick Cheney reduced this to 648 aircraft beginning in 1996. By 1997, funding instability had further cut the total to 339, which was again reduced to 277 by 2003. In 2004, the Department of Defense (DoD) further reduced this to 183 operational aircraft, despite the USAF's preference for 381. A multi-year procurement plan was implemented in 2006 to save $15 billion, with total program cost projected to be $62 billion for 183 F-22s distributed to seven combat squadrons. In 2008, Congress passed a defense spending bill that raised the total orders for production aircraft to 187.

 

The first two F-22s built were EMD aircraft in the Block 1.0 configuration for initial flight testing, while the third was a Block 2.0 aircraft built to represent the internal structure of production airframes and enabled it to test full flight loads. Six more EMD aircraft were built in the Block 10 configuration for development and upgrade testing, with the last two considered essentially production quality jets. Production for operational squadrons consisted of 37 Block 20 training aircraft and 149 Block 30/35 combat aircraft; one of the Block 35 aircraft is dedicated to flight sciences at Edwards Air Force Base.

 

The numerous new technologies in the F-22 resulted in substantial cost overruns and delays. Many capabilities were deferred to post-service upgrades, reducing the initial cost but increasing total program cost. As production wound down in 2011, the total program cost is estimated to be about $67.3 billion, with $32.4 billion spent on Research, Development, Test and Evaluation (RDT&E) and $34.9 billion on procurement and military construction (MILCON) in then year dollars. The incremental cost for an additional F-22 was estimated at about $138 million in 2009.

 

Ban on exports

 

The F-22 cannot be exported under US federal law to protect its stealth technology and other high-tech features. Customers for U.S. fighters are acquiring earlier designs such as the F-15 "Eagle" and F-16 "Fighting Falcon" or the newer F-35 "Lightning II", which contains technology from the F-22 but was designed to be cheaper, more flexible, and available for export. In September 2006, Congress upheld the ban on foreign F-22 sales. Despite the ban, the 2010 defense authorization bill included provisions requiring the DoD to prepare a report on the costs and feasibility for an F-22 export variant, and another report on the effect of F-22 export sales on U.S. aerospace industry.

 

Some Australian politicians and defense commentators proposed that Australia should attempt to purchase F-22s instead of the planned F-35s, citing the F-22's known capabilities and F-35's delays and developmental uncertainties. However, the Royal Australian Air Force (RAAF) determined that the F-22 was unable to perform the F-35's strike and close air support roles. The Japanese government also showed interest in the F-22 for its Replacement-Fighter program. The Japan Air Self-Defense Force (JASDF) would reportedly require fewer fighters for its mission if it obtained the F-22, thus reducing engineering and staffing costs. However, in 2009 it was reported that acquiring the F-22 would require increases to the Japanese government's defense budget beyond the historical 1 percent of its GDP. With the end of F-22 production, Japan chose the F-35 in December 2011. Israel also expressed interest, but eventually chose the F-35 because of the F-22's price and unavailability.

 

Production termination

 

Throughout the 2000s, the need for F-22s was debated, due to rising costs and the lack of relevant adversaries. In 2006, Comptroller General of the United States David Walker found that "the DoD has not demonstrated the need" for more investment in the F-22, and further opposition to the program was expressed by Secretary of Defense Donald Rumsfeld, Deputy Secretary of Defense Gordon R. England, Senator John McCain, and Chairman of U.S. Senate Committee on Armed Services Senator John Warner. The F-22 program lost influential supporters in 2008 after the forced resignations of Secretary of the Air Force Michael Wynne and the Chief of Staff of the Air Force General T. Michael Moseley.

 

In November 2008, Secretary of Defense Robert Gates stated that the F-22 was not relevant in post-Cold War conflicts such as irregular warfare operations in Iraq and Afghanistan, and in April 2009, under the new Obama Administration, he called for ending production in FY2011, leaving the USAF with 187 production aircraft. In July, General James Cartwright, Vice Chairman of the Joint Chiefs of Staff, stated to the Senate Committee on Armed Services his reasons for supporting termination of F-22 production. They included shifting resources to the multirole F-35 to allow proliferation of fifth-generation fighters for three service branches and preserving the F/A-18 production line to maintain the military's electronic warfare (EW) capabilities in the Boeing EA-18G "Growler". Issues with the F-22's reliability and availability also raised concerns. After President Obama threatened to veto further production, the Senate voted in July 2009 in favor of ending production and the House subsequently agreed to abide by the 187 production aircraft cap. Gates stated that the decision was taken in light of the F-35's capabilities, and in 2010, he set the F-22 requirement to 187 aircraft by lowering the number of major regional conflict preparations from two to one.

 

In 2010, USAF initiated a study to determine the costs of retaining F-22 tooling for a future Service Life Extension Program (SLEP). A RAND Corporation paper from this study estimated that restarting production and building an additional 75 F-22s would cost $17 billion, resulting in $227 million per aircraft, or $54 million higher than the flyaway cost. Lockheed Martin stated that restarting the production line itself would cost about $200 million. Production tooling and associated documentation were subsequently stored at the Sierra Army Depot, allowing the retained tooling to support the fleet life cycle. There were reports that attempts to retrieve this tooling found empty containers, but a subsequent audit found that the tooling was stored as expected.

 

Russian and Chinese fighter developments have fueled concern, and in 2009, General John Corley, head of Air Combat Command, stated that a fleet of 187 F-22s would be inadequate, but Secretary Gates dismissed General Corley's concern. In 2011, Gates explained that Chinese fifth-generation fighter developments had been accounted for when the number of F-22s was set, and that the U.S. would have a considerable advantage in stealth aircraft in 2025, even with F-35 delays. In December 2011, the 195th and final F-22 was completed out of 8 test EMD and 187 operational aircraft produced; the aircraft was delivered to the USAF on 2 May 2012.

 

In April 2016, the House Armed Services Committee (HASC) Tactical Air and Land Forces Subcommittee proposed legislation that would direct the Air Force to conduct a cost study and assessment associated with resuming production of the F-22. Since the production halt directed in 2009 by then Defense Secretary Gates, lawmakers and the Pentagon noted that air warfare systems of Russia and China were catching up to those of the U.S. Lockheed Martin has proposed upgrading the Block 20 training aircraft into combat-coded Block 30/35 versions as a way to increase numbers available for deployment. On 9 June 2017, the Air Force submitted their report to Congress stating they had no plans to restart the F-22 production line due to economic and operational issues; it estimated it would cost approximately $50 billion to procure 194 additional F-22s at a cost of $206–$216 million per aircraft, including approximately $9.9 billion for non-recurring start-up costs and $40.4 billion for aircraft procurement costs.

 

Upgrades

 

The first aircraft with combat-capable Block 3.0 software flew in 2001. Increment 2, the first upgrade program, was implemented in 2005 for Block 20 aircraft onward and enabled the employment of Joint Direct Attack Munitions (JDAM). Certification of the improved AN/APG-77(V)1 radar was completed in March 2007, and airframes from production Lot 5 onward are fitted with this radar, which incorporates air-to-ground modes. Increment 3.1 for Block 30 aircraft onward provided improved ground-attack capability through synthetic aperture radar mapping and radio emitter direction finding, electronic attack and Small Diameter Bomb (SDB) integration; testing began in 2009 and the first upgraded aircraft was delivered in 2011. To address oxygen deprivation issues, F-22s were fitted with an automatic backup oxygen system (ABOS) and modified life support system starting in 2012.

 

Increment 3.2 for Block 35 aircraft is a two-part upgrade process; 3.2A focuses on electronic warfare, communications and identification, while 3.2B includes geolocation improvements and a new stores management system to show the correct symbols for the AIM-9X and AIM-120D. To enable two-way communication with other platforms, the F-22 can use the Battlefield Airborne Communications Node (BACN) as a gateway. The planned Multifunction Advanced Data Link (MADL) integration was cut due to development delays and lack of proliferation among USAF platforms. The F-22 fleet is planned to start receiving Increment 3.2B as well as a software upgrade for cryptography capabilities and avionics stability in May 2019. A Multifunctional Information Distribution System-Joint (MIDS-J) radio that replaces the current Link-16 receive-only box is expected to be operational by 2020. Subsequent upgrades are also focusing on having an open architecture to enable faster future enhancements.

 

In 2024, funding is projected to begin for the F-22 mid-life upgrade (MLU), which is expected to include new sensors and antennas, hardware refresh, cockpit improvements, and a helmet mounted display and cuing system. Other enhancements being developed include IRST functionality for the AN/AAR-56 Missile Launch Detector (MLD) and more durable stealth coating based on the F-35's.

 

The F-22 was designed for a service life of 8,000 flight hours, with a $350 million "structures retrofit program". Investigations are being made for upgrades to extend their useful lives further. In the long term, the F-22 is expected to be superseded by a sixth-generation jet fighter to be fielded in the 2030s.

  

Design

 

Overview

 

The F-22 "Raptor" is a fifth-generation fighter that is considered fourth generation in stealth aircraft technology by the USAF. It is the first operational aircraft to combine supercruise, supermaneuverability, stealth, and sensor fusion in a single weapons platform. The F-22 has four empennage surfaces, retractable tricycle landing gear, and clipped delta wings with reverse trailing edge sweep and leading edge extensions running to the upper outboard corner of the inlets. Flight control surfaces include leading-edge flaps, flaperons, ailerons, rudders on the canted vertical stabilizers, and all-moving horizontal tails (stabilators); for speed brake function, the ailerons deflect up, flaperons down, and rudders outwards to increase drag.

 

The aircraft's dual Pratt & Whitney F119-PW-100 augmented turbofan engines are closely spaced and incorporate pitch-axis thrust vectoring nozzles with a range of ±20 degrees; each engine has maximum thrust in the 35,000 lbf (156 kN) class. The F-22's thrust-to-weight ratio at typical combat weight is nearly at unity in maximum military power and 1.25 in full afterburner. Maximum speed without external stores is approximately Mach 1.8 at military power and greater than Mach 2 with afterburners.

 

The F-22's high cruise speed and operating altitude over prior fighters improve the effectiveness of its sensors and weapon systems, and increase survivability against ground defenses such as surface-to-air missiles. The aircraft is among only a few that can supercruise, or sustain supersonic flight without using fuel-inefficient afterburners; it can intercept targets which subsonic aircraft would lack the speed to pursue and an afterburner-dependent aircraft would lack the fuel to reach. The F-22's thrust and aerodynamics enable regular combat speeds of Mach 1.5 at 50,000 feet (15,000 m). The use of internal weapons bays permits the aircraft to maintain comparatively higher performance over most other combat-configured fighters due to a lack of aerodynamic drag from external stores. The aircraft's structure contains a significant amount of high-strength materials to withstand stress and heat of sustained supersonic flight. Respectively, titanium alloys and composites comprise 39% and 24% of the structural weight.

 

The F-22's aerodynamics, relaxed stability, and powerful thrust-vectoring engines give it excellent maneuverability and energy potential across its flight envelope. The airplane has excellent high alpha (angle of attack) characteristics, capable of flying at trimmed alpha of over 60° while maintaining roll control and performing maneuvers such as the Herbst maneuver (J-turn) and Pugachev's Cobra. The flight control system and full-authority digital engine control (FADEC) make the aircraft highly departure resistant and controllable, thus giving the pilot carefree handling.

  

Stealth

 

The F-22 was designed to be highly difficult to detect and track by radar. Measures to reduce radar cross-section (RCS) include airframe shaping such as alignment of edges, fixed-geometry serpentine inlets and curved vanes that prevent line-of-sight of the engine faces and turbines from any exterior view, use of radar-absorbent material (RAM), and attention to detail such as hinges and pilot helmets that could provide a radar return. The F-22 was also designed to have decreased radio emissions, infrared signature and acoustic signature as well as reduced visibility to the naked eye. The aircraft's flat thrust-vectoring nozzles reduce infrared emissions of the exhaust plume to mitigate the threat of infrared homing ("heat seeking") surface-to-air or air-to-air missiles. Additional measures to reduce the infrared signature include special topcoat and active cooling of leading edges to manage the heat buildup from supersonic flight.

 

Compared to previous stealth designs like the F-117, the F-22 is less reliant on RAM, which are maintenance-intensive and susceptible to adverse weather conditions. Unlike the B-2, which requires climate-controlled hangars, the F-22 can undergo repairs on the flight line or in a normal hangar. The F-22 has a Signature Assessment System which delivers warnings when the radar signature is degraded and necessitates repair. While the F-22's exact RCS is classified, in 2009 Lockheed Martin released information indicating that from certain angles the aircraft has an RCS of 0.0001 m² or −40 dBsm – equivalent to the radar reflection of a "steel marble". Effectively maintaining the stealth features can decrease the F-22's mission capable rate to 62–70%.

 

The effectiveness of the stealth characteristics is difficult to gauge. The RCS value is a restrictive measurement of the aircraft's frontal or side area from the perspective of a static radar. When an aircraft maneuvers it exposes a completely different set of angles and surface area, potentially increasing radar observability. Furthermore, the F-22's stealth contouring and radar absorbent materials are chiefly effective against high-frequency radars, usually found on other aircraft. The effects of Rayleigh scattering and resonance mean that low-frequency radars such as weather radars and early-warning radars are more likely to detect the F-22 due to its physical size. However, such radars are also conspicuous, susceptible to clutter, and have low precision. Additionally, while faint or fleeting radar contacts make defenders aware that a stealth aircraft is present, reliably vectoring interception to attack the aircraft is much more challenging. According to the USAF an F-22 surprised an Iranian F-4 "Phantom II" that was attempting to intercept an American UAV, despite Iran's assertion of having military VHF radar coverage over the Persian Gulf.

The Admiralty Extension At Sunset

This picture was taken in Dayton, Ohio at Cox Arboretum on the inside with my 135mm lens + 20mm Extension tube along with a density filter. Better view in Light box for detail on pedals.

 

As always thank you for your lovely comments.

*your

 

Is it bad I'm too lazy to go back and fix the grammar? haha.

 

Anyway, here is another nail tutorial. This time for press on nail extensions! This is easier than it looks, but it does take time and is a little tedious. Let me know if you have any questions! :)

Zagreb, Croatia

bankside, southwark, london

I am the worst when it comes to taking photographs of my art. I mean really just the absolute worst. I tried 4 different locations to try to get a straight-on shot of this piece and took a dozen shots with different settings at each of the 4 shoots and they all came out unusable, even with editing. To be fair, this piece is especially hard to photograph because of the metallic nature of the pattern/leaves. Anyhow, here is a photo of the piece taken from a spot about 45 degrees to the left of facing straight on.

Tapantí National Park. Cartago, Costa Rica

 

AF-S DX NIKKOR 18-140mm f/3.5-5.6G ED VR mounted on a 20 mm Xit Auto focus macro extension tube.

Works are currently under way for the extension and restoration of Ardmore House, UCD. The Project consists of the construction of a two storey extension integrated into the existing, adjoining Ardmore House Building, a protected structure with significant heritage value and we are in collaboration with UCD, RKD Architects, ARUP, Linesight, Garland, David Slattery Conservation Architects and Mitchell and Associates.

_MG_4342ir850nm+apx

SMC Takumar + extension tube

Well, this was a surprise find. Only 20' from our back door, awesome. I was heading down to see what flowers were blooming but this stopped me in my tracks. The extension tube (11mm) made it 0.95 macro.

The lighting was so great on the cap, from shade on the left to a gradual shift into the light on the right.

This picture was taken in Dayton, Ohio at Cox Arboretum on the inside of building with my 135mm lens + 12mm Extension tube. Better view in Light box. Click on image for 100% detail on pedals.

 

As always thank you for your lovely comments.

Talbot Road / Dickson Road Juction

Thanks for looking.....appreciated.....best bigger.......hope you have a Great Sunday

50mm1.8 MK1 at f2.8 + extension tubes. Home studio

The Nikon 50mm f/1.8D coupled with an Extension Tube Set is the cheapest way for macro photography that can compete with dedicated macro lens which are at least three times costly.

Vista desde Calatañazor

 

OMD EM5 MII 12mm Extension Tube 40mm

sel50f18 + 16mm extension tube

This picture was taken in Dayton, Ohio at Wegerzyn Gardens with my 180mm lens + 20mm Extension tube. Better view in Light box. Click on image for 100% detail on organs.

1 2 4 6 7 ••• 79 80