View allAll Photos Tagged ethernet
This is a picture of the rear of the server in my living room. It is the Router / Firewall / File Server / VPN Server / Web Server / Music Server / Etc. for my home network. Utilizing a mini-itx motherboard with a daughterboard capability, it runs cool, is energy efficient, and is pretty darn powerful. I purchased the case, motherboard, CPU, power supply, and 3x gigabit ethernet daughterboard from mitxpc.com (http://mitxpc.com/proddetail.asp?prod=EKJA330M3388).
I slapped a 80gb hard drive in, installed ClearOS 5.1 and have been loving it ever since.
Specs:
Intel Atom 330 1.6ghz Dual Core CPU
Intel GMA 950 Graphics Core
2GB RAM
80GB Hard Drive
4x Gigabit Ethernet (1 on-board, 3 on daughterboard expansion card)
150W Power Supply
Total price including the hard drive: Roughly $300
Featuring the same Artix™-7 field programmable gate array (FPGA) from Xilinx®, the Nexys 4 DDR is a ready-to-use digital circuit development platform designed to bring additional industry applications into the classroom environment. With its large, high-capacity FPGA (Xilinx part number XC7A100T-1CSG324C) and collection of USB, Ethernet, and other ports, the Nexys 4 DDR can host designs ranging from introductory combinational circuits to powerful embedded processors.
store.digilentinc.com/nexys-4-ddr-artix-7-fpga-trainer-bo...
fc to lc custom grey fiber optic cable Ethernet patch cord available in single-mode 9/125 and multi-mode 62.5/125
Microchip announced the KSZ8061 single-chip 10BASE-T/100BASE-TX automotive- and industrial-grade Ethernet physical-layer transceiver, which is designed for data communication over low-cost Unshielded Twisted Pair (UTP) cables. It is the first of a new family based on the patented and programmable Quiet-WIRE® enhanced EMC technology, providing reduced line emissions and superior receiver immunity performance. System reliability is also enhanced with Microchip’s proven LinkMD+® advanced cable diagnostics, along with an embedded signal-quality indicator for the dynamic monitoring of link error margins. To learn more about Microchip’s portfolio of Ethernet physical-layer transceivers, visit www.microchip.com/Ethernet-PHYs-111715a.
My first PCB: a breakout board for ERNI's MagJack.
I had to design my own part for this as I couldn't find a library for the jack. Once you get the hang of it, it's not that tricky. Once that and the design part were taken care of, the rest was pretty smooth. I used paper of a recruiting handout from a university to print the toner transfers. It worked out pretty well (I did have to make a few corrections – sharpie, exacto). I wasn't sure what to use for drilling, so I used a small conical shaped diamond bit with a Dremel. It too, worked out pretty well. I have to say I'm really happy of the end result and will not hesitate to do it again.
Back view of SE/30, showing PDS cards, Ethernet card connector bracket and secondary PSU driving internal 7200rpm hard drive. The topmost PDS card is a MacCon Ethernet 10base-T. The MacCon is in turn connected to a Twin Spark Adapter (made by Manabu Sakai of ARTMIX Japan). The TS adapter allows me to also attach a Daystar Turbo 040 card at the same time. Without the TS adapter, I would have to choose between an Ethernet card or an accelerator, not both.
The arduino for the weather clock with a ethernet and protoyping shield.
More information: http://www.seancarney.ca/projects/weather-clock
I had to rig my Airport base station (dial-up) to accommodate our Mac iBook (wireless) and our Dell (ethernet to the Airport). It actually works!
Another thing I scanned while trying out my new scanner...
This is my PropRPM board, equipped with micro-SD slot, ethernet, and S/PDIF out.
fc to lc custom red fiber optic cable Ethernet patch cord available in single-mode 9/125 and multi-mode 62.5/125
Featuring the same Artix™-7 field programmable gate array (FPGA) from Xilinx®, the Nexys 4 DDR is a ready-to-use digital circuit development platform designed to bring additional industry applications into the classroom environment. With its large, high-capacity FPGA (Xilinx part number XC7A100T-1CSG324C) and collection of USB, Ethernet, and other ports, the Nexys 4 DDR can host designs ranging from introductory combinational circuits to powerful embedded processors.
store.digilentinc.com/nexys-4-ddr-artix-7-fpga-trainer-bo...
Everywhere you go, inside the medical office and out, you see the data cables coursing through the building
Featuring the same Artix™-7 field programmable gate array (FPGA) from Xilinx®, the Nexys 4 DDR is a ready-to-use digital circuit development platform designed to bring additional industry applications into the classroom environment. With its large, high-capacity FPGA (Xilinx part number XC7A100T-1CSG324C) and collection of USB, Ethernet, and other ports, the Nexys 4 DDR can host designs ranging from introductory combinational circuits to powerful embedded processors.
store.digilentinc.com/nexys-4-ddr-artix-7-fpga-trainer-bo...
This is the ethernet connection for the surface mount style, and needs a Ethernet Connector (port cover for this one is included in the package).
Read more about this on my website.
This is an Arduino Uno with an Ethernet Shield (W5100 Chip under the heat sink). I use it for a lot of different scenarios. I am still impressed about the possibilities which I can achieve with this.
lc to lc custom yellow fiber optic cable Ethernet patch cord available in single-mode 9/125 and multi-mode 62.5/125
fc to fc custom red fiber optic cable Ethernet patch cord available in single-mode 9/125 and multi-mode 62.5/125
Masterclock NTD26 Network Time Display Clock.
10/100BaseT ethernet connection to local or remote NTP time server, checking server every 30 minutes for updates (selectable from 1 sec to 24 hours). Uses 2 user designated public or private NTP time servers.
2.3" digits. Display is adjustable from dim to very bright using the software -- currently at <35% brightness. Can be read easily at 100'.
Software "discovers" network clock, controls all aspects of setting clock (selecting time servers etc)... using WinDiscovery. Password protected. Once clock is pointed to servers via IP address, PC is no longer required. Becomes a standalone "appliance" on the network.
Can be set for 12 or 24 hour time - in 12 hour mode (above) it provides a PM indicator in the right bottom corner. UTC or user's time zone set using their software.
fc to st custom grey fiber optic cable Ethernet patch cord available in single-mode 9/125 and multi-mode 62.5/125
Ethernet cable plugs into the Ethernet Connector - this is something we already had plenty of.
Read more about this on my website.
Tengo un Packard Bell iMedia W1661.
Características:
Placa base Foxconn Clara (1PCIE 16X, 1PCIE 1X, 2 PCI) 4 internos sata+1 externo, ethernet, 4 USBs, 1 Firewire, 1 VGA, 2 PS2...
Chasis de aluminio modelo Zeus
Intel Core Quad Q6600 (4 x 2,4 GHz) 8 MB de caché L2 FSB 1066 MHz
Chipset: Intel G33 con acelerador gráfico.
Ventilación: ventilador de 120mm Cooler Master encima del micro,disipador en el Chipset,en el micro, ventilador en la gráfica y en la fuente de alimentación.
Memoria:4 Gb DDRII (2 módulos de 2 GB)
T.Gráfica: nVidia GeForce 8400 GS de 256 mb, hasta 2047. Con tecnología Pure vídeo HD y memoria por TurboCaché adaptada para Blu-ray y DVD HD.
T. Sonido: Realtek 5.1 HD de 24 bits, máxima calidad: 192.000Hz (calidad de estudio).
Windows Vista Home Premium 64 bits (con el Movie Marker, el Media Center...)
Disco duro de: 500 GB por vía SATAII a 7200 rpm.
Salidas de audio, HDTV, 6 USB 2.0(2 delante 4 detrás), salidas teclado y ratón, puertos eSATA, VGA, salidas de altavoces, subwoofer, DVI, entradas de audio, puerto firewire, entrada de micrófono, ...
Grabadora de CD y DVD+-R
Lector de tarjetas 8 en 1
Viene con el Norton 360 (solo 90 días), el Creator 9 y el Skype, todo gratis
Ahora hay una pegatina en la torre que dice: "TV by AverMedia"
Super Hero Upcycled Earrings by Amery Studios on etsy
Made with ethernet cable from Free Geek in Portland!