View allAll Photos Tagged easyinstallation
The Kwiki Locking Extension is offered as an extension to the Kwiki handle. This is required for situations where the damper assembly (manufactured with Kwiki sets) is installed in ductwork that has exterior insulation and allows for the handle to be spaced off the surface over the insulation so the insulation does not have to be cut back at the damper. If the insulation is cut back at the damper handle, the R-value will go down and there is a potential for condensation, etc.
Product comes 100 pieces to a case.
More information about this product can be found at
Gripple’s Trapeze Brackets work in conjunction with Gripple’sTrapeze Fastener System. The Brackets and Fasteners replace the use of hanger straps when suspending rectangular ductwork.They attach easily to each side of the ductwork with screws at four points, can be pre-attached to ductwork prior to installation or during installation and allow for easy post-installation height adjustment.
The belt clip with flag key easily releases the locking mechanism for adjusting.
This Product comes 10/case.
More information about this product can be found at
G Flange is a hollow roll-formed section of galvanized steel,containing an integral sealant. The synthetic resin sealant has excellent adhesion to metal, is easy to work with, is non-flow to180º F and retains its sealing properties indefinitely.
Product comes in 20' lengths (1,000'/bundle - 510 lbs.) and 12' lengths (600'/bundle - 306 lbs.).
More information about this product can be found at
Gripple cable is made for use in its trapeze brackets which work in conjunction with its Trapeze Fastener System. The Brackets and Fasteners replace the use of hanger straps when suspending rectangular ductwork.They attach easily to each side of the ductwork with screws at four points, can be pre-attached to ductwork prior to installation or during installation and allow for easy post-installation height adjustment.
Product comes in 1/8" and 5/64" at 500 LF
More information about this product can be found at
Gripple’s brackets and fasteners replace the use of hanger straps when suspending ductwork.They allow for easy installation, height adjustment, and thanks to it's unique design, can hold much more than most devices its size.
Product comes 50/case.
More information about this product can be found at
DynAir’s KWIKI line of bright, zinc-plated residential regulators is designed to allow easy installation onto any factory-made residential quality damper blade. The spring in the spring-loaded bearing will never bind or interfere with the blade. KB-1 (spring loaded bearing) and KM-1T (threaded end bearing) will both perforate the metal with ease every time. The special KWIKI handle can also be used on both ends by simply flipping it from one side to the other. Both ends are available with steel back-up washers and gaskets to resist leakage. For use in dampers up to 10"x10"
Product comes in 100 sets/case
1 set includes:
1 - Kwiki Regulator
1 - Kwiki Handle 100
1 - Kwiki Wingnut 100
1 - Kwiki Washer (Steel) 100
1 - Kwiki Gasket Economy Bearing 100
More information about this product can be found at
RMR-6325 is a white, surface and shape adapting rubber membrane for flashing and sealing unusual roofing needs, including fasteners on metal roof installations. RMR-6325 has an aggressive grip, superior long-term adhesion and stays flexible during application, assuring immediate sealing on contact. RMR-6325’s pressure sensitive properties allow a fast, clean and easy application.
This product comes in 3" and 12" rolls.
More information about this product can be found at
DynAir’s KWIKI line of bright, zinc-plated residential regulators is
designed to allow easy installation onto any factory-made residential
quality damper blade. The spring in the spring-loaded bearing will never bind or interfere with the blade. KB-1 (spring loaded bearing) and KM-1T (threaded end bearing) will both perforate the metal with ease every time.
Product comes 100/case as well as 1,000/case for the threaded end bearing option.
More information about this product can be found at
There can be two types of pvc halls: fixed or retractable. The carrying structure is made of steel with a fabric cover, and, in this picture, you can see how it can be combined with a high-speed door.
Getting these products combined will contribute to minimize energy costs due to heat or cold loss.
The pvc warehouses allow you to create an area wich otherwise could not be fully used.
For any further information visit our website or contact us:
OCM Industrial Doors Srl
Via Mongilardi, 3
13900 Biella, Italy
Tel.: (+39) 015 . 840 83 01
Fax: (+39) 015 . 849 26 60
Our Kwiki line of bright, zinc-plated residential regulators is designed to allow easy installation onto any factory-made residential quality damper blade.
Product comes 100/case or 1,000/case
More information about this product can be found at
Fold-up doors are high-speed doors that open and close using vertical pack-away operations.
This picture shows a fold-up door combined with a pvc warehouse. In the warehouse the carrying structure is made of steel with a pvc fabric cover.
This type of structure can be easily installed and allow you to create protected working areas that otherwise would be unuseful.
For any further information visit our website or contact us:
OCM Industrial Doors Srl
Via Mongilardi, 3
13900 Biella Italy
Tel.: (+39) 015 . 840 83 01
Fax: (+39) 015 . 849 26 60
Gps: N 45°32'52'',E 8°02'55''
The Circular Duct Hanger was designed for the suspension of circular ductwork using a ⅜" threaded rod.
Features heavy galvanized steel bracket for rigidity, galvanized coiled strip or strips cut from waste material maybe used, and a high load-bearing capacity.
Product weighs 0.25 lbs. and comes 200/case.
More information, including installation procedure, can be found at
15 Color Remote Control Strip Kit for Ultimate Pursuit of Brightness & Light Intensity
www.xkglow.com/Ultra_Bright_15_Color_72_LED_Remote_Flexib...
The Home Fibering System (HOFIS) combines an optical outlet with a pre-assembled low-bend installation cable. This allows easiest installation of fibers in the living area.
15 Color Remote Control Strip Kit for Ultimate Pursuit of Brightness & Light Intensity
www.xkglow.com/Ultra_Bright_15_Color_72_LED_Remote_Flexib...
15 Color Remote Control Strip Kit for Ultimate Pursuit of Brightness & Light Intensity
www.xkglow.com/Ultra_Bright_15_Color_72_LED_Remote_Flexib...
15 Color Remote Control Strip Kit for Ultimate Pursuit of Brightness & Light Intensity
www.xkglow.com/Ultra_Bright_15_Color_72_LED_Remote_Flexib...
2 pcs Extra LED Strips for "XK034003" 7 Color Motorcycle LED Strip Kit
www.xkglow.com/2_pcs_Extra_LED_Flexible_Strips_for_XK0340...
The Keypad Deadbolt version of the Schlage LiNK kit.
Here's what I have:
1. The Bridge (black plastic wrapped thing laying horizontal on bottom left)-Schlage wireless router-this is what Z-wave and the lock are linked together with once the bridge is connected to the internet.
2. Repeater-the white plastic thing (above the bridge). You plug this into a wall outlet and then plug your lamp into it and you can either dim or turn on /turn off your lamp from your cell phone. This happens after you synch it up with the bridge and connect the bridge to the internet.
3. Power supply cord-for the bridge
4. Latch and strike for installation-I didn't have to use this because I already had a Schalge Kpd installed in my door before installing the new LiNK KPD
5. 9 volt battery come free with every kit.
6. The exterior side of the KPD-this is where you punch in your four digit access code to unlock or lock the door.
7. The interior side of the LiNK KPD. The black plastic portion on top is where the radio frequency chip is housed. This will be synched up to the bridge so Z-wave and the Schlage intranet site can monitor and give remote access to your cell phone or computer.
NOTE: there is also a set of keys in case you have a battery die or some electrical problem with the lock. The mechanical portion of the lock will always work when you insert the key into the key hole.
Cost Effective Kit for Upgrading Existing 12V Single Color System
www.xkglow.com/Upgrade_5_Led_Step_Light_Kit_2_PCS_Value_P...
Easy Mounting Universal License Plate Light
www.xkglow.com/5_LED_License_Plate_Light_Pod_p/xk084003c.htm
The set up and instructions for the Keypad Lever Schlage LiNK.
Here's what I have:
1. The Bridge-Schlage wireless router-this is what Z-wave and the lock are linked together with once the bridge is connected to the internet.
2. Power supply cord-for the bridge
3. Repeater-the white plastic thing in the orange wrap (next to the bridge). You plug this into a wall outlet and then plug in your lamp and you can either dim or turn on /turn off your lamp from your cell phone. This happens after you synch it up with the bridge and connect the bridge to the internet.
4. Latch and strike for installation-I didn't have to use this because I already had a Schalge Kpd installed in my door before installing the new LiNK KPD
5. The exterior side of the KPD-this is where you punch in your four digit access code to unlock or lock the door.
6. The interior side of the LiNK KPD. The black plastic portion on top is where the radio frequency chip is housed. This will be synched up to the bridge so Z-wave and the Schlage intranet site can monitor and give remote access to your cell phone or computer.
NOTE: there is also a set of keys in case you have a battery die or some electrical problem with the lock. The mechanical portion of the lock will always work when you insert the key into the key hole. Also their is a 9 volt battery included with this kit (some how I left it out of the photo by accident)
Cost Effective Kit for Upgrading Existing 12V Single Color System
www.xkglow.com/Upgrade_3_Led_Step_Light_Kit_4_PCS_Value_P...
Upgrade the Existing LED Kit to A Whole New Bright Level
www.xkglow.com/Upgrade_4_Led_Oval_Light_kit_2_PCS_Value_P...
This is the back side of the Schlage LiNK KPD.
The black shiny plastic cover on the top portion is where the RF (radio frequency) chip is housed in the lock. This is the part that speaks to your cell phone and to Z-wave (www.zwave.com or check out link.schlage.com for more info).
I have to set up the lock to the bridge (wireless router) RF signal so from my cell phone can monitor who comes in and out of the house using a four-digit access code on the keypad lock.
Because I was a newbie-it took me about thirty minutes to remove the old KPD I had in the door and replace it with the Schlage LiNK KPD, I've been told if you already have experience with installing these lock it will only take you five or ten minutes to uninstall/install unless you have some issues with the size of the deadbolt hole or other measurement issues.
Download the new release of our map design studio at TileMill.com, and read more about the release and the updates it comes with at developmentseed.org/blog/2011/aug/09/tilemill-040-released.
It's true, all you need is a Phillips screw driver. And luckily I already had a keypad deadbolt installed in my front door, and all I had to do was unscrew the old one and put in the new Schlage LiNK KPD.
I didn't have to unscrew my latch (the thingy that extends the deadbolt into the door frame)
NOTE: I had never installed or uninstalled a door lockset before-it was pretty painless.
Seam Roof Mounting Solution
Sunlight Connect offer to installation of the Seam roof mounting system that is predicated on Seam roof clamps. it's a non-penetrating design and then there are not any probabilities of water leakages.The installation of seam mounting is easy because it simply involves attaching the seam clamp to the standing seams. The clamps are safe to use as a result of they guarantee most stability with none penetrations a various number of system combinations are possible such as L-foot, fixed foot or PV module clamp directly.
The usage of the minimum range of components reduces the installation price and makes it extremely economical.The clamps are made of high tensile strength aluminum and are available in two types which make it possible to work on different standing seam metal roofs.To be precise, this method is that the best combination of potency and responsibility at a profitable worth.
#TiltAlongTheRoof #EasyInstallation #SheetLoadingSolution #MinimumNumberofParts #HighlyEconomic
Contact us:- +91 901 527 3301, +91 999 021 7790 and for more information kindly visit:-http://www.sunlightconnect.com/
The Blackbird-X ICU Car Camera® is a full-time rear view driving camera and Sirius/XM antenna all-in-one and features our patent pending DualCam(wide/standard angle) and is the best way to see your blind spots while improving driving safety. The ICU Car Camera® is mounted to the roof of your vehicle just like a Sirius/XM antenna. The Blackbird-X Car Camera® has a Sirius/XM Antenna built right in, so it can replace your old factory installed Sirius/XM antenna by selecting the correct connection when ordering. You can even connect to your aftermarket in-dash/dock receiver antenna by adding a hole in the roof of your car for installation (professional installation recommended). ICU Car Camera’s® connect to our ICU 7″ LCD Video Monitor(sold separately, or included with the ICU Car Cam System) that clips to your vehicle’s standard rear view mirror. Even at night the ICU Car Camera® has night vision so it gives you a nice bright view of traffic, parking lots, the driveway, other objects around you, and especially pedestrians behind your car.
This is the front of the Schlage LiNK KPD-very similiar to the Schlage Electronic series KPD.
I've extended the latch so you can see the deadbolt working.
The handy-dandy instruction sheets I was given to install the Schlage LiNK lock by myself. Only found it a little difficult to read-but otherwise I was able to figure out what came with the kit and how it worked together.
These instructions are for the Keypad Lever version of the wirless lock, I was also given a Keypad Deadbolt version that was installed on my front door. See photos 3-8.
I already switched out the front part of the KPD and stuck in the Schlage LiNK KPD. They looked remarkably similar with the exception of this is a Camelot style Schlage LiNK KPD and i had to remove the Plymouth interior side
I had to remeber to untuck and disconnect these pesky wires that link the lock from the exterior kpd face to interior thumbturn.
The Blackbird-X ICU Car Cam System™ is a complete REAR VIEW camera system that includes one Blackbird-X ICU Car Camera™ and a 7″(dia.) LCD Touch Screen Rear View Video Monitor. The Blackbird-X ICU Car Camera® is a full-time rear view driving camera and Sirius/XM antenna all-in-one and features our patent pending modular system and DualCam(wide/standard angle) and is the best way to see your blind spots while improving driving safety. The ICU Car Camera® is mounted to the roof of your vehicle just like a Sirius/XM antenna. The Blackbird-X ICU Car Camera® has a Sirius/XM Antenna built right in, so it can replace your old factory installed Sirius/XM antenna by selecting the correct connection when ordering. You can even connect to your in-dash/dock receiver antenna cable to the Blackbird-X ICU Car Camera® by adding a hole in the roof of your car for installation (professional installation recommended). The Video Monitor clips on to your standard rear view mirror and and connects to the ICU Car Camera®. Even at night the ICU Car Camera® has night vision so it gives you a nice bright view of traffic, parking lots, the driveway, other objects around you, and especially pedestrians behind your car.
The Scorpion ICU Car Cam System™ is a complete full-time rear view driving camera system that includes one Scorpion ICU Car Camera® and our ICU 7″(dia.) LCD Touch Screen Video Monitor. Our patent pending modular system and DualCam(wide/standard angle) camera is the best way to see your blind spots while improving driving safety. This ICU Car Camera® simply sticks to the inside of your vehicle’s rear window which gives a great view behind your car. It features an adjustable hinge to angle it on any rear window for your car, truck, or van. The Video Monitor clips to your vehicle’s standard rear view mirror. Even at night the ICU Car Camera® has low light sensitivity to give you a nice bright view of traffic, parking lots, the driveway, other objects around you, and especially pedestrians behind your car.
The Scorpion ICU Car Camera® is a full-time rear view driving camera patent pending DualCam(wide/standard angle) camera and is the best way to see your blind spots while improving driving safety. The Scorpion ICU Car Camera® simply sticks to the inside of your vehicle’s rear window which gives a great view behind your car. It features an adjustable hinge to angle it on any rear window for your car, truck, or van. ICU Car Camera’s® connect to our ICU 7″ LCD Video Monitor(sold separately, or included with the ICU Car Cam System™) that clips to your vehicle’s standard rear view mirror (optionally you can also connect a backup camera to the ICU Video Monitor). Even at night the ICU Car Camera® has low light sensitivity to give you a nice bright view of traffic, parking lots, the driveway, other objects around you, and especially pedestrians behind your car.
The kit came with a 9volt battery with a five year life-span. I like it when products are sold complete with batteries.
Sunlight Connect Pvt Ltd is manufacturer and provider of Super solar structure across India.The module are designed with latest technology, T6 6063 Aluminum middle and end Clamps by our professional expert so that system life is more, robust and easy to install.
Our structure are Tested on windspeed 55m/sec.The panels can be portrait and landscape arrangement both are possible.
#Tilt5-15Degree #EasyInstallation #LowCost
Contact us:- +91 901 527 3301, +91 999 021 7790 and for more information kindly visit:-http://www.sunlightconnect.com
Discover step-by-step instructions for a hassle-free installation that brings style to your windows. Say goodbye to complexity and hello to chic home decor. Elevate your living space with this easy-to-follow tutorial.
Contact Us:
🔗https://dubaicurtain.com
☎+971 50 637 9229
📧 info@dubaicurtain.com
🏢 Al Quoz first behind BMW showroom Sheik Zayed Road DUBAI
1.Dimensionally accurate
2.Seamless finish
3.Effective conductivity
4.Upto 250microns Copper bonding on strips
5.Long life due to process of bonding over strips
6.Highly conductive
Solar Ground Mount Solutions
Sunlight Connect Pvt Ltd is a best producer and supplier of solar ground mount solutions.
Our structure are created with latest innovative technology, T6 6063 Aluminum middle and end Clamps by our professional solar expert to provide a simple, effective and Reliable solution.The module are Tested on wind speed 55m/sec.
#Tilt 5-35Degree #EasyInstallation #PortraitandLandscapeOrientation.
Contact us:- +91 901 527 3301, +91 999 021 7790 and for more information kindly visit:-http://www.sunlightconnect.com
The traditional method of fire ceasing are relics of a bygone age. Now its time for an advance guard to save your life and assets. With fischer's FIRESTOP solution all you have to do is, just install and leave your belongings and your life in safe hands. #10yearschallenge #accepted #fischerindia #firestop #powertools #safeproducts #safety #hasslefree #mondaymotivation #mondaymood #solution #innovative #innovation #toolsofthetrade #tools #manufacture #safetyequipments #moderntools #moderntechnique #creatives #creativity #saveyourlife #buildersofindia #buildersofinsta #imagination #wonderful #easyinstallation #fischer #construction #architecture
Address Appear offers an innovative business opportunity for selling reflective curb address signs. With a unique one-time distributor fee, the opportunity offers a great way to make extra income. Add this service to an existing business or sell part time. Includes basic training for both selling and installing reflective curb address signs. You get to set your own prices! Gain instant access to significant discounts, sales training and how to get started! Includes marketing materials, distributor support and more! Great full, or part time income potential.
Join us today!
[Buy Now]
Low Elevation Ballast System
Sunlight Connect Pvt Ltd is manufacturer and supplier of Low Elevation Solar Ballast Mounting System.Our structure are Tested on windspeed 55m/sec.The panel is tilt around 5-20 Degree.
The panels can be portrait and landscape arrangement both are possible.The Aluminium 6063 Profile are used to protect our robust Low elevation ballast structure.
We are using 6063 T6 Aluminium mid end Clamps to build our robust structure with a low cost.
#Tilt5-20Degree #EasyInstallation #QuickAssembly #HighlyEconomic.
Contact us:- +91 901 527 3301, +91 999 021 7790 and for more information kindly visit:-http://www.sunlightconnect.com/
Self-Closing Hinges from Oasis Outdoor Products are useful for gates and doors. They automatically close the gate after it is opened. This is helpful for safety and security. These are easy to put in and adjust. They are made from strong materials that last a long time. These are perfect for homes, gardens, and pools. They help keep children and pets safe by ensuring gates always close properly.
Corrugated Roof Mounting Solution
Sunlight Connect Pvt Ltd is manufacturer and supplier of Corrugated Roof Solar mounting structure.Our structure are Tested on wind speed 55m/sec. We are using 6063 T6 Aluminium profile to fabricate our robust roof mounting structure with the lowest possible cost.
#TiltAlongTheRoof #EasyInstallation #TrussLoadingSolution #MinimumNumberofParts #HighlyEconomic
Contact us:- +91 901 527 3301, +91 999 021 7790 and for more information kindly visit:-http://www.sunlightconnect.com/
🌿🌸 Spring is here! DIY Your Garden with WPC Decking 🌸🌿
Welcome the new season by transforming your garden with WPC decking! 🌞✨ It’s the perfect time for a DIY project—easy to install, durable, and designed to elevate your outdoor space effortlessly.
✅ Simple installation—perfect for DIY lovers ️
✅ Weather-resistant & ideal for spring refresh ️
✅ Natural wood look with low maintenance 🍃
Whether for a patio, terrace, or backyard, WPC decking helps you create a beautiful, cozy outdoor retreat in no time. Enjoy the fresh air and sunshine in a space designed by YOU! ☀️🏡
Product Introduction:
HL3-2A mixed flow fan is a new kind of fan between an axial fan and acentrifugal fan . The product is featured by new design , compact structure ,small size , light weight , high efficiency , high pressure , low noise , easyinstallation , etc . It can take place of the low and middle pressure centrifugal fans under 2000Pa , and is widely used to transport air and remove dust in industrial , civil buildings.
PRODUCTS INFO:
Type:POPULA mixed flow fan HL3-2A/HLF-6
Brand:POPULA
Electric Current:AC
Power:0.37-160 KW
Voltage:1HP/3HP 110V/220V/380V/440V/3KV/6KV
Frequency: 50/60HZ
Air Volume:2136~169085 CMH
Air Pressure:85-3161 Pa
Speed:720-2900 rpm
Max Noise:<72
Size: 40-125CM
Weight: 85KG
Blade Material:Carbon steel
Mounting:floor standing
Driving Mode:Direct motor driving
Color:can be customized
HS Code:8414593000
Application:Air supply, air exhausting, material conveying
Tags:Industrial mixed flow fan ,exhaust fan
BUSINESS POLICY
Leadtime:1 days for samples and 10days for bulk after the payment
Payment: T/T, Paypal, Moneygram,Western union
Delivery: by sea/air/land/courier
Packing: Standard packing for long distance delivery
Certification:Follow ROHS,CE,CCC,UL,ETL and ISO2008 9001 system
MOQ: 1
Warranty:One year
Price: negotiable for big QTY order
OUR ADVANTAGE:
1) 20 years experience only for air management.
2) Factory covers an area of 115,000 m2, more than 1300 employees.
3) Over 40 engineers who were the top of industry in R&D department .
4) Multi-service available: Small/samples order and OBM/OEM/ODM service offered
5) Competitive Prices and Premiums Earth-friendly Products In a Variety of Design.
6) Has a number of advanced automatic production lines and packing equipment to insure Prompt Delivery .
7) QC work under ISO2008 9001 system, produce and Quality Control according to international standard.
8) Fetch in the 8S modernization management mode.
The fischer concrete screw ULTRACUT FBS II US is a powerful anchoring solution with top installation comfort. A must have solution for cracked concrete and non-cracked concrete with quick and easy installation. You can find more features about this product in: bit.ly/2T6Uwnm . . . . . . . #fischerindia #ultracutFBS #highperformance #Solution #anchor #fixings #powerful #concrete #screw #innovative #creaative #buildersofinsta #toolsofthetrade #moderntecnique #manufacturer #powertools #engineering #construction #architecture #heavyload #thursdaymotivation #aheadofthegame #fischerproducts #worldclass #mechanicalengineering #civilengineering #easyinstallation